selftests/bpf: Fix u8 narrow load checks for bpf_sk_lookup remote_port

commit 3c69611b8926f8e74fcf76bd97ae0e5dafbeb26a upstream.

In commit 9a69e2b385f4 ("bpf: Make remote_port field in struct
bpf_sk_lookup 16-bit wide") ->remote_port field changed from __u32 to
__be16.

However, narrow load tests which exercise 1-byte sized loads from
offsetof(struct bpf_sk_lookup, remote_port) were not adopted to reflect the
change.

As a result, on little-endian we continue testing loads from addresses:

 - (__u8 *)&ctx->remote_port + 3
 - (__u8 *)&ctx->remote_port + 4

which map to the zero padding following the remote_port field, and don't
break the tests because there is no observable change.

While on big-endian, we observe breakage because tests expect to see zeros
for values loaded from:

 - (__u8 *)&ctx->remote_port - 1
 - (__u8 *)&ctx->remote_port - 2

Above addresses map to ->remote_ip6 field, which precedes ->remote_port,
and are populated during the bpf_sk_lookup IPv6 tests.

Unsurprisingly, on s390x we observe:

  #136/38 sk_lookup/narrow access to ctx v4:OK
  #136/39 sk_lookup/narrow access to ctx v6:FAIL

Fix it by removing the checks for 1-byte loads from offsets outside of the
->remote_port field.

Fixes: 9a69e2b385f4 ("bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide")
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220319183356.233666-3-jakub@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide

commit 9a69e2b385f443f244a7e8b8bcafe5ccfb0866b4 upstream.

remote_port is another case of a BPF context field documented as a 32-bit
value in network byte order for which the BPF context access converter
generates a load of a zero-padded 16-bit integer in network byte order.

First such case was dst_port in bpf_sock which got addressed in commit
4421a582718a ("bpf: Make dst_port field in struct bpf_sock 16-bit wide").

Loading 4-bytes from the remote_port offset and converting the value with
bpf_ntohl() leads to surprising results, as the expected value is shifted
by 16 bits.

Reduce the confusion by splitting the field in two - a 16-bit field holding
a big-endian integer, and a 16-bit zero-padding anonymous field that
follows it.

Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209184333.654927-2-jakub@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "selftests: net: Add tls config dependency for tls selftests"

commit 20695e9a9fd39103d1b0669470ae74030b7aa196 upstream.

This reverts commit d9142e1cf3bbdaf21337767114ecab26fe702d47.

The test is supposed to run cleanly with TLS is disabled,
to test compatibility with TCP behavior. I can't repro
the failure [1], the problem should be debugged rather
than papered over.

Link: https://lore.kernel.org/all/20220325161203.7000698c@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/
Fixes: d9142e1cf3bb ("selftests: net: Add tls config dependency for tls selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220328212904.2685395-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/smc: send directly on setting TCP_NODELAY

commit b70a5cc045197aad9c159042621baf3c015f6cc7 upstream.

In commit ea785a1a573b("net/smc: Send directly when
TCP_CORK is cleared"), we don't use delayed work
to implement cork.

This patch use the same algorithm, removes the
delayed work when setting TCP_NODELAY and send
directly in setsockopt(). This also makes the
TCP_NODELAY the same as TCP.

Cc: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Allow AVIC support on system w/ physical APIC ID > 255

commit 4a204f7895878363ca8211f50ec610408c8c70aa upstream.

Expand KVM's mask for the AVIC host physical ID to the full 12 bits defined
by the architecture.  The number of bits consumed by hardware is model
specific, e.g. early CPUs ignored bits 11:8, but there is no way for KVM
to enumerate the "true" size.  So, KVM must allow using all bits, else it
risks rejecting completely legal x2APIC IDs on newer CPUs.

This means KVM relies on hardware to not assign x2APIC IDs that exceed the
"true" width of the field, but presumably hardware is smart enough to tie
the width to the max x2APIC ID.  KVM also relies on hardware to support at
least 8 bits, as the legacy xAPIC ID is writable by software.  But, those
assumptions are unavoidable due to the lack of any way to enumerate the
"true" width.

Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Fixes: 44a95dae1d22 ("KVM: x86: Detect and Initialize AVIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220211000851.185799-1-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[modified due to the conflict caused by the commit 391503528257 ("KVM:
x86: SVM: move avic definitions from AMD's spec to svm.h")]
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: don't use BACO for reset in S3

commit ebc002e3ee78409c42156e62e4e27ad1d09c5a75 upstream.

Seems to cause a reboots or hangs on some systems.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1924
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1953
Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdkfd: Create file descriptor after client is added to smi_clients list

commit e79a2398e1b2d47060474dca291542368183bc0f upstream.

This ensures userspace cannot prematurely clean-up the client before
it is fully initialised which has been proven to cause issues in the
past.

Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/pmu: Add missing callbacks for Tegra devices

commit 38d4e5cf5b08798f093374e53c2f4609d5382dd5 upstream.

Fixes a crash booting on those platforms with nouveau.

Fixes: 4cdd2450bf73 ("drm/nouveau/pmu/gm200-: use alternate falcon reset sequence")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.17+
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322124800.2605463-1-kherbst@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/vcn: Fix the register setting for vcn1

commit 02fc996d5098f4c3f65bdf6cdb6b28e3f29ba789 upstream.

Correct the code error for setting register UVD_GFX10_ADDR_CONFIG.
Need to use inst_idx, or it only will set VCN0.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/smu10: fix SoC/fclk units in auto mode

commit 2f25d8ce09b7ba5d769c132ba3d4eb84a941d2cb upstream.

SMU takes clock limits in Mhz units.  socclk and fclk were
using 10 khz units in some cases.  Switch to Mhz units.
Fixes higher than required SoC clocks.

Fixes: 97cf32996c46d9 ("drm/amd/pm: Removed fixed clock in auto mode DPM")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/display: change pipe policy for DCN 2.1

commit 879791ad8bf3dc5453061cad74776a617b6e3319 upstream.

Fixes crash on MST Hub disconnect.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1849
Fixes: ee2698cf79cc ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split")
Signed-off-by: Benjamin Marty <info@benjaminmarty.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panel: ili9341: fix optional regulator handling

commit d14eb80e27795b7b20060f7b151cdfe39722a813 upstream.

If the optional regulator lookup fails, reset the pointer to NULL.
Other functions such as mipi_dbi_poweron_reset_conditional() only do
a NULL pointer check and will otherwise dereference the error pointer.

Fixes: 5a04227326b04c15 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Daniel Mack <daniel@zonque.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317225537.826302-1-daniel@zonque.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Prevent immediate close+reconnect

commit 3be232f11a3cc9b0ef0795e39fa11bdb8e422a06 upstream.

If we have already set up the socket and are waiting for it to connect,
then don't immediately close and retry.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

amd/display: set backlight only if required

commit 4052287a75eb3fc0f487fcc5f768a38bede455c8 upstream.

[Why]
comparing pwm bl values (coverted) with user brightness(converted)
levels in commit_tail leads to continuous setting of backlight via dmub
as they don't to match.
This leads overdrive in queuing of commands to DMCU that sometimes lead
to depending on load on DMCU fw:

"[drm:dc_dmub_srv_wait_idle] *ERROR* Error waiting for DMUB idle: status=3"

[How]
Store last successfully set backlight value and compare with it instead
of pwm reads which is not what we should compare with.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: Fix unregistering of framebuffers without device

commit 0f525289ff0ddeb380813bd81e0f9bdaaa1c9078 upstream.

OF framebuffers do not have an underlying device in the Linux
device hierarchy. Do a regular unregister call instead of hot
unplugging such a non-existing device. Fixes a NULL dereference.
An example error message on ppc64le is shown below.

  BUG: Kernel NULL pointer dereference on read at 0x00000060
  Faulting instruction address: 0xc00000000080dfa4
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  [...]
  CPU: 2 PID: 139 Comm: systemd-udevd Not tainted 5.17.0-ae085d7f9365 #1
  NIP:  c00000000080dfa4 LR: c00000000080df9c CTR: c000000000797430
  REGS: c000000004132fe0 TRAP: 0300   Not tainted  (5.17.0-ae085d7f9365)
  MSR:  8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE>  CR: 28228282  XER: 20000000
  CFAR: c00000000000c80c DAR: 0000000000000060 DSISR: 40000000 IRQMASK: 0
  GPR00: c00000000080df9c c000000004133280 c00000000169d200 0000000000000029
  GPR04: 00000000ffffefff c000000004132f90 c000000004132f88 0000000000000000
  GPR08: c0000000015658f8 c0000000015cd200 c0000000014f57d0 0000000048228283
  GPR12: 0000000000000000 c00000003fffe300 0000000020000000 0000000000000000
  GPR16: 0000000000000000 0000000113fc4a40 0000000000000005 0000000113fcfb80
  GPR20: 000001000f7283b0 0000000000000000 c000000000e4a588 c000000000e4a5b0
  GPR24: 0000000000000001 00000000000a0000 c008000000db0168 c0000000021f6ec0
  GPR28: c0000000016d65a8 c000000004b36460 0000000000000000 c0000000016d64b0
  NIP [c00000000080dfa4] do_remove_conflicting_framebuffers+0x184/0x1d0
  [c000000004133280] [c00000000080df9c] do_remove_conflicting_framebuffers+0x17c/0x1d0 (unreliable)
  [c000000004133350] [c00000000080e4d0] remove_conflicting_framebuffers+0x60/0x150
  [c0000000041333a0] [c00000000080e6f4] remove_conflicting_pci_framebuffers+0x134/0x1b0
  [c000000004133450] [c008000000e70438] drm_aperture_remove_conflicting_pci_framebuffers+0x90/0x100 [drm]
  [c000000004133490] [c008000000da0ce4] bochs_pci_probe+0x6c/0xa64 [bochs]
  [...]
  [c000000004133db0] [c00000000002aaa0] system_call_exception+0x170/0x2d0
  [c000000004133e10] [c00000000000c3cc] system_call_common+0xec/0x250

The bug [1] was introduced by commit 27599aacbaef ("fbdev: Hot-unplug
firmware fb devices on forced removal"). Most firmware framebuffers
have an underlying platform device, which can be hot-unplugged
before loading the native graphics driver. OF framebuffers do not
(yet) have that device. Fix the code by unregistering the framebuffer
as before without a hot unplug.

Tested with 5.17 on qemu ppc64le emulation.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal")
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: Zack Rusin <zackr@vmware.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org # v5.11+
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Zheyu Ma <zheyuma97@gmail.com>
Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/all/YkHXO6LGHAN0p1pq@debian/
Link: https://patchwork.freedesktop.org/patch/msgid/20220404194402.29974-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/gic-v3: Fix GICR_CTLR.RWP polling

commit 0df6664531a12cdd8fc873f0cac0dcb40243d3e9 upstream.

It turns out that our polling of RWP is totally wrong when checking
for it in the redistributors, as we test the *distributor* bit index,
whereas it is a different bit number in the RDs... Oopsie boo.

This is embarassing. Not only because it is wrong, but also because
it took *8 years* to notice the blunder...

Just fix the damn thing.

Fixes: 021f653791ad ("irqchip: gic-v3: Initial support for GICv3")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20220315165034.794482-2-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Inherit event_caps

commit e3265a4386428d3d157d9565bb520aabff8b4bf0 upstream.

It was reported that some perf event setup can make fork failed on
ARM64.  It was the case of a group of mixed hw and sw events and it
failed in perf_event_init_task() due to armpmu_event_init().

The ARM PMU code checks if all the events in a group belong to the
same PMU except for software events.  But it didn't set the event_caps
of inherited events and no longer identify them as software events.
Therefore the test failed in a child process.

A simple reproducer is:

  $ perf stat -e '{cycles,cs,instructions}' perf bench sched messaging
  # Running 'sched/messaging' benchmark:
  perf: fork(): Invalid argument

The perf stat was fine but the perf bench failed in fork().  Let's
inherit the event caps from the parent.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20220328200112.457740-1-namhyung@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: qcom_l2_pmu: fix an incorrect NULL check on list iterator

commit 2012a9e279013933885983cbe0a5fe828052563b upstream.

The bug is here:
return cluster;

The list iterator value 'cluster' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.

To fix the bug, return 'cluster' when found, otherwise return NULL.

Cc: stable@vger.kernel.org
Fixes: 21bdbb7102ed ("perf: add qcom l2 cache perf events driver")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327055733.4070-1-xiam0nd.tong@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: sata_dwc_460ex: Fix crash due to OOB write

commit 7aa8104a554713b685db729e66511b93d989dd6a upstream.

the driver uses libata's "tag" values from in various arrays.
Since the mentioned patch bumped the ATA_TAG_INTERNAL to 32,
the value of the SATA_DWC_QCMD_MAX needs to account for that.

Otherwise ATA_TAG_INTERNAL usage cause similar crashes like
this as reported by Tice Rex on the OpenWrt Forum and
reproduced (with symbols) here:

| BUG: Kernel NULL pointer dereference at 0x00000000
| Faulting instruction address: 0xc03ed4b8
| Oops: Kernel access of bad area, sig: 11 [#1]
| BE PAGE_SIZE=4K PowerPC 44x Platform
| CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0
| NIP:  c03ed4b8 LR: c03d27e8 CTR: c03ed36c
| REGS: cfa59950 TRAP: 0300   Not tainted  (5.4.163)
| MSR:  00021000 <CE,ME>  CR: 42000222  XER: 00000000
| DEAR: 00000000 ESR: 00000000
| GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...]
| [..]
| NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254
| LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc
| Call Trace:
| [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable)
| [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc
| [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524
| [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0
| [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204
| [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130
| [...]

This is because sata_dwc_dma_xfer_complete() NULLs the
dma_pending's next neighbour "chan" (a *dma_chan struct) in
this '32' case right here (line ~735):
> hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE;

Then the next time, a dma gets issued; dma_dwc_xfer_setup() passes
the NULL'd hsdevp->chan to the dmaengine_slave_config() which then
causes the crash.

With this patch, SATA_DWC_QCMD_MAX is now set to ATA_MAX_QUEUE + 1.
This avoids the OOB. But please note, there was a worthwhile discussion
on what ATA_TAG_INTERNAL and ATA_MAX_QUEUE is. And why there should not
be a "fake" 33 command-long queue size.

Ideally, the dw driver should account for the ATA_TAG_INTERNAL.
In Damien Le Moal's words: "... having looked at the driver, it
is a bigger change than just faking a 33rd "tag" that is in fact
not a command tag at all."

Fixes: 28361c403683c ("libata: add extra internal command")
Cc: stable@kernel.org # 4.18+
BugLink: https://github.com/openwrt/openwrt/issues/9505
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Don't extend the pseudo-encoding to GP counters

commit 4a263bf331c512849062805ef1b4ac40301a9829 upstream.

The INST_RETIRED.PREC_DIST event (0x0100) doesn't count on SPR.
perf stat -e cpu/event=0xc0,umask=0x0/,cpu/event=0x0,umask=0x1/ -C0

 Performance counter stats for 'CPU(s) 0':

           607,246      cpu/event=0xc0,umask=0x0/
                 0      cpu/event=0x0,umask=0x1/

The encoding for INST_RETIRED.PREC_DIST is pseudo-encoding, which
doesn't work on the generic counters. However, current perf extends its
mask to the generic counters.

The pseudo event-code for a fixed counter must be 0x00. Check and avoid
extending the mask for the fixed counter event which using the
pseudo-encoding, e.g., ref-cycles and PREC_DIST event.

With the patch,
perf stat -e cpu/event=0xc0,umask=0x0/,cpu/event=0x0,umask=0x1/ -C0

 Performance counter stats for 'CPU(s) 0':

           583,184      cpu/event=0xc0,umask=0x0/
           583,048      cpu/event=0x0,umask=0x1/

Fixes: 2de71ee153ef ("perf/x86/intel: Fix ICL/SPR INST_RETIRED.PREC_DIST encodings")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1648482543-14923-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/tlb: Revert retpoline avoidance approach

commit d39268ad24c0fd0665d0c5cf55a7c1a0ebf94766 upstream.

0day reported a regression on a microbenchmark which is intended to
stress the TLB flushing path:

https://lore.kernel.org/all/20220317090415.GE735@xsang-OptiPlex-9020/

It pointed at a commit from Nadav which intended to remove retpoline
overhead in the TLB flushing path by taking the 'cond'-ition in
on_each_cpu_cond_mask(), pre-calculating it, and incorporating it into
'cpumask'.  That allowed the code to use a bunch of earlier direct
calls instead of later indirect calls that need a retpoline.

But, in practice, threads can go idle (and into lazy TLB mode where
they don't need to flush their TLB) between the early and late calls.
It works in this direction and not in the other because TLB-flushing
threads tend to hold mmap_lock for write.  Contention on that lock
causes threads to _go_ idle right in this early/late window.

There was not any performance data in the original commit specific
to the retpoline overhead.  I did a few tests on a system with
retpolines:

https://lore.kernel.org/all/dd8be93c-ded6-b962-50d4-96b1c3afb2b7@intel.com/

which showed a possible small win.  But, that small win pales in
comparison with the bigger loss induced on non-retpoline systems.

Revert the patch that removed the retpolines.  This was not a
clean revert, but it was self-contained enough not to be too painful.

Fixes: 6035152d8eeb ("x86/mm/tlb: Open-code on_each_cpu_cond_mask() for tlb_is_not_lazy()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Nadav Amit <namit@vmware.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/164874672286.389.7021457716635788197.tip-bot2@tip-bot2
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/msi: Fix msi message data shadow struct

commit 59b18a1e65b7a2134814106d0860010e10babe18 upstream.

The x86 MSI message data is 32 bits in total and is either in
compatibility or remappable format, see Intel Virtualization Technology
for Directed I/O, section 5.1.2.

Fixes: 6285aa50736 ("x86/msi: Provide msi message shadow structs")
Co-developed-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Reto Buerki <reet@codelabs.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220407110647.67372-1-reet@codelabs.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: Restrict usage of GPIO chip irq members before initialization

commit 5467801f1fcbdc46bc7298a84dbf3ca1ff2a7320 upstream.

GPIO chip irq members are exposed before they could be completely
initialized and this leads to race conditions.

One such issue was observed for the gc->irq.domain variable which
was accessed through the I2C interface in gpiochip_to_irq() before
it could be initialized by gpiochip_add_irqchip(). This resulted in
Kernel NULL pointer dereference.

Following are the logs for reference :-

kernel: Call Trace:
kernel:  gpiod_to_irq+0x53/0x70
kernel:  acpi_dev_gpio_irq_get_by+0x113/0x1f0
kernel:  i2c_acpi_get_irq+0xc0/0xd0
kernel:  i2c_device_probe+0x28a/0x2a0
kernel:  really_probe+0xf2/0x460
kernel: RIP: 0010:gpiochip_to_irq+0x47/0xc0

To avoid such scenarios, restrict usage of GPIO chip irq members before
they are completely initialized.

Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/hfi1: Fix use-after-free bug for mm struct

commit 2bbac98d0930e8161b1957dc0ec99de39ade1b3c upstream.

Under certain conditions, such as MPI_Abort, the hfi1 cleanup code may
represent the last reference held on the task mm.
hfi1_mmu_rb_unregister() then drops the last reference and the mm is freed
before the final use in hfi1_release_user_pages().  A new task may
allocate the mm structure while it is still being used, resulting in
problems. One manifestation is corruption of the mmap_sem counter leading
to a hang in down_write().  Another is corruption of an mm struct that is
in use by another task.

Fixes: 3d2a9d642512 ("IB/hfi1: Ensure correct mm is used at all times")
Link: https://lore.kernel.org/r/20220408133523.122165.72975.stgit@awfm-01.cornelisnetworks.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: patch_text: Fixup last cpu should be master

commit 31a099dbd91e69fcab55eef4be15ed7a8c984918 upstream.

These patch_text implementations are using stop_machine_cpuslocked
infrastructure with atomic cpu_count. The original idea: When the
master CPU patch_text, the others should wait for it. But current
implementation is using the first CPU as master, which couldn't
guarantee the remaining CPUs are waiting. This patch changes the
last CPU as the master to solve the potential risk.

Fixes: ae16480785de ("arm64: introduce interfaces to hotpatch kernel and module code")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220407073323.743224-2-guoren@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: core: add dma_map_dev for __spi_unmap_msg()

commit 409543cec01a84610029d6440c480c3fdd7214fb upstream.

Commit b470e10eb43f ("spi: core: add dma_map_dev for dma device") added
dma_map_dev for _spi_map_msg() but missed to add for unmap routine,
__spi_unmap_msg(), so add it now.

Fixes: b470e10eb43f ("spi: core: add dma_map_dev for dma device")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220406132238.1029249-1-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: prevent subvol with swapfile from being deleted

commit 60021bd754c6ca0addc6817994f20290a321d8d6 upstream.

A subvolume with an active swapfile must not be deleted otherwise it
would not be possible to deactivate it.

After the subvolume is deleted, we cannot swapoff the swapfile in this
deleted subvolume because the path is unreachable.  The swapfile is
still active and holding references, the filesystem cannot be unmounted.

The test looks like this:

  mkfs.btrfs -f $dev > /dev/null
  mount $dev $mnt

  btrfs sub create $mnt/subvol
  touch $mnt/subvol/swapfile
  chmod 600 $mnt/subvol/swapfile
  chattr +C $mnt/subvol/swapfile
  dd if=/dev/zero of=$mnt/subvol/swapfile bs=1K count=4096
  mkswap $mnt/subvol/swapfile
  swapon $mnt/subvol/swapfile

  btrfs sub delete $mnt/subvol
  swapoff $mnt/subvol/swapfile  # failed: No such file or directory
  swapoff --all

  unmount $mnt                  # target is busy.

To prevent above issue, we simply check that whether the subvolume
contains any active swapfile, and stop the deleting process.  This
behavior is like snapshot ioctl dealing with a swapfile.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Kaiwen Hu <kevinhu@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix qgroup reserve overflow the qgroup limit

commit b642b52d0b50f4d398cb4293f64992d0eed2e2ce upstream.

We use extent_changeset->bytes_changed in qgroup_reserve_data() to record
how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the
bytes_changed is set as "unsigned int", and it will overflow if we try to
fallocate a range larger than 4GiB. The result is we reserve less bytes
and eventually break the qgroup limit.

Unlike regular buffered/direct write, which we use one changeset for
each ordered extent, which can never be larger than 256M.  For
fallocate, we use one changeset for the whole range, thus it no longer
respects the 256M per extent limit, and caused the problem.

The following example test script reproduces the problem:

  $ cat qgroup-overflow.sh
  #!/bin/bash

  DEV=/dev/sdj
  MNT=/mnt/sdj

  mkfs.btrfs -f $DEV
  mount $DEV $MNT

  # Set qgroup limit to 2GiB.
  btrfs quota enable $MNT
  btrfs qgroup limit 2G $MNT

  # Try to fallocate a 3GiB file. This should fail.
  echo
  echo "Try to fallocate a 3GiB file..."
  fallocate -l 3G $MNT/3G.file

  # Try to fallocate a 5GiB file.
  echo
  echo "Try to fallocate a 5GiB file..."
  fallocate -l 5G $MNT/5G.file

  # See we break the qgroup limit.
  echo
  sync
  btrfs qgroup show -r $MNT

  umount $MNT

When running the test:

  $ ./qgroup-overflow.sh
  (...)

  Try to fallocate a 3GiB file...
  fallocate: fallocate failed: Disk quota exceeded

  Try to fallocate a 5GiB file...

  qgroupid         rfer         excl     max_rfer
  --------         ----         ----     --------
  0/5           5.00GiB      5.00GiB      2.00GiB

Since we have no control of how bytes_changed is used, it's better to
set it to u64.

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Ethan Lien <ethanlien@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids

commit e590928de7547454469693da9bc7ffd562e54b7e upstream.

On Sapphire Rapids, the FRONTEND_RETIRED.MS_FLOWS event requires the
FRONTEND MSR value 0x8. However, the current FRONTEND MSR mask doesn't
support it.

Update intel_spr_extra_regs[] to support it.

Fixes: 61b985e3e775 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1648482543-14923-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Restore speculation related MSRs during S3 resume

commit e2a1256b17b16f9b9adf1b6fea56819e7b68e463 upstream.

After resuming from suspend-to-RAM, the MSRs that control CPU's
speculative execution behavior are not being restored on the boot CPU.

These MSRs are used to mitigate speculative execution vulnerabilities.
Not restoring them correctly may leave the CPU vulnerable.  Secondary
CPU's MSRs are correctly being restored at S3 resume by
identify_secondary_cpu().

During S3 resume, restore these MSRs for boot CPU when restoring its
processor state.

Fixes: 772439717dbf ("x86/bugs/intel: Set proper CPU features and setup RDS")
Reported-by: Neelima Krishnan <neelima.krishnan@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pm: Save the MSR validity status at context setup

commit 73924ec4d560257004d5b5116b22a3647661e364 upstream.

The mechanism to save/restore MSRs during S3 suspend/resume checks for
the MSR validity during suspend, and only restores the MSR if its a
valid MSR.  This is not optimal, as an invalid MSR will unnecessarily
throw an exception for every suspend cycle.  The more invalid MSRs,
higher the impact will be.

Check and save the MSR validity at setup.  This ensures that only valid
MSRs that are guaranteed to not throw an exception will be attempted
during suspend.

Fixes: 7a9c2dd08ead ("x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume")
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix race between timeout flush and removal

commit e677edbcabee849bfdd43f1602bccbecf736a646 upstream.

io_flush_timeouts() assumes the timeout isn't in progress of triggering
or being removed/canceled, so it unconditionally removes it from the
timeout list and attempts to cancel it.

Leave it on the list and let the normal timeout cancelation take care
of it.

Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: implement compat handling for IORING_REGISTER_IOWQ_AFF

commit 0f5e4b83b37a96e3643951588ed7176b9b187c0a upstream.

Similarly to the way it is done im mbind syscall.

Cc: stable@vger.kernel.org # 5.14
Fixes: fe76421d1da1dcdb ("io_uring: allow user configurable IO thread CPU affinity")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: defer splice/tee file validity check until command issue

commit a3e4bc23d5470b2beb7cc42a86b6a3e75b704c15 upstream.

In preparation for not using the file at prep time, defer checking if this
file refers to a valid io_uring instance until issue time.

This also means we can get rid of the cleanup flag for splice and tee.

Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: don't check req->file in io_fsync_prep()

commit ec858afda857e361182ceafc3d2ba2b164b8e889 upstream.

This is a leftover from the really old days where we weren't able to
track and error early if we need a file and it wasn't assigned. Kill
the check.

Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mempolicy: fix mpol_new leak in shared_policy_replace

commit 4ad099559b00ac01c3726e5c95dc3108ef47d03e upstream.

If mpol_new is allocated but not used in restart loop, mpol_new will be
freed via mpol_put before returning to the caller.  But refcnt is not
initialized yet, so mpol_put could not do the right things and might
leak the unused mpol_new.  This would happen if mempolicy was updated on
the shared shmem file while the sp->lock has been dropped during the
memory allocation.

This issue could be triggered easily with the below code snippet if
there are many processes doing the below work at the same time:

  shmid = shmget((key_t)5566, 1024 * PAGE_SIZE, 0666|IPC_CREAT);
  shm = shmat(shmid, 0, 0);
  loop many times {
    mbind(shm, 1024 * PAGE_SIZE, MPOL_LOCAL, mask, maxnode, 0);
    mbind(shm + 128 * PAGE_SIZE, 128 * PAGE_SIZE, MPOL_DEFAULT, mask,
          maxnode, 0);
  }

Link: https://lkml.kernel.org/r/20220329111416.27954-1-linmiaohe@huawei.com
Fixes: 42288fe366c4 ("mm: mempolicy: Convert shared_policy mutex to spinlock")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org> [3.8]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)

commit 01e67e04c28170c47700c2c226d732bbfedb1ad0 upstream.

If an mremap() syscall with old_size=0 ends up in move_page_tables(), it
will call invalidate_range_start()/invalidate_range_end() unnecessarily,
i.e.  with an empty range.

This causes a WARN in KVM's mmu_notifier.  In the past, empty ranges
have been diagnosed to be off-by-one bugs, hence the WARNing.  Given the
low (so far) number of unique reports, the benefits of detecting more
buggy callers seem to outweigh the cost of having to fix cases such as
this one, where userspace is doing something silly.  In this particular
case, an early return from move_page_tables() is enough to fix the
issue.

Link: https://lkml.kernel.org/r/20220329173155.172439-1-pbonzini@redhat.com
Reported-by: syzbot+6bde52d89cfdf9f61425@syzkaller.appspotmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

highmem: fix checks in __kmap_local_sched_{in,out}

commit 66f133ceab7456c789f70a242991ed1b27ba1c3d upstream.

When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check
that even slots in the tsk->kmap_ctrl.pteval are unmapped.  The slots are
initialized with 0 value, but the check is done with pte_none.  0 pte
however does not necessarily mean that pte_none will return true.  e.g.
on xtensa it returns false, resulting in the following runtime warnings:

 WARNING: CPU: 0 PID: 101 at mm/highmem.c:627 __kmap_local_sched_out+0x51/0x108
 CPU: 0 PID: 101 Comm: touch Not tainted 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13
 Call Trace:
   dump_stack+0xc/0x40
   __warn+0x8f/0x174
   warn_slowpath_fmt+0x48/0xac
   __kmap_local_sched_out+0x51/0x108
   __schedule+0x71a/0x9c4
   preempt_schedule_irq+0xa0/0xe0
   common_exception_return+0x5c/0x93
   do_wp_page+0x30e/0x330
   handle_mm_fault+0xa70/0xc3c
   do_page_fault+0x1d8/0x3c4
   common_exception+0x7f/0x7f

 WARNING: CPU: 0 PID: 101 at mm/highmem.c:664 __kmap_local_sched_in+0x50/0xe0
 CPU: 0 PID: 101 Comm: touch Tainted: G        W         5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13
 Call Trace:
   dump_stack+0xc/0x40
   __warn+0x8f/0x174
   warn_slowpath_fmt+0x48/0xac
   __kmap_local_sched_in+0x50/0xe0
   finish_task_switch$isra$0+0x1ce/0x2f8
   __schedule+0x86e/0x9c4
   preempt_schedule_irq+0xa0/0xe0
   common_exception_return+0x5c/0x93
   do_wp_page+0x30e/0x330
   handle_mm_fault+0xa70/0xc3c
   do_page_fault+0x1d8/0x3c4
   common_exception+0x7f/0x7f

Fix it by replacing !pte_none(pteval) with pte_val(pteval) != 0.

Link: https://lkml.kernel.org/r/20220403235159.3498065-1-jcmvbkbc@gmail.com
Fixes: 5fbda3ecd14a ("sched: highmem: Store local kmaps in task struct")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lz4: fix LZ4_decompress_safe_partial read out of bound

commit eafc0a02391b7b36617b36c97c4b5d6832cf5e24 upstream.

When partialDecoding, it is EOF if we've either filled the output buffer
or can't proceed with reading an offset for following match.

In some extreme corner cases when compressed data is suitably corrupted,
UAF will occur.  As reported by KASAN [1], LZ4_decompress_safe_partial
may lead to read out of bound problem during decoding.  lz4 upstream has
fixed it [2] and this issue has been disscussed here [3] before.

current decompression routine was ported from lz4 v1.8.3, bumping
lib/lz4 to v1.9.+ is certainly a huge work to be done later, so, we'd
better fix it first.

[1] https://lore.kernel.org/all/000000000000830d1205cf7f0477@google.com/
[2] https://github.com/lz4/lz4/commit/c5d6f8a8be3927c0bec91bcc58667a6cfad244ad#
[3] https://lore.kernel.org/all/CC666AE8-4CA4-4951-B6FB-A2EFDE3AC03B@fb.com/

Link: https://lkml.kernel.org/r/20211111105048.2006070-1-guoxuenan@huawei.com
Reported-by: syzbot+63d688f1d899c588fb71@syzkaller.appspotmail.com
Signed-off-by: Guo Xuenan <guoxuenan@huawei.com>
Reviewed-by: Nick Terrell <terrelln@fb.com>
Acked-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Yann Collet <cyan@fb.com>
Cc: Chengyang Fan <cy.fan@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Fixup support for writeback-cache for eMMC and SD

commit 08ebf903af57cda6d773f3dd1671b64f73b432b8 upstream.

During the card initialization process, the mmc core checks whether the
eMMC/SD card supports an internal writeback-cache and then enables it
inside the card.

Unfortunately, this isn't according to what the mmc core reports to the
upper block layer. Instead, the writeback-cache support with REQ_FLUSH and
REQ_FUA, are being enabled depending on whether the host supports the CMD23
(MMC_CAP_CMD23) and whether an eMMC supports the reliable-write command.

This is wrong and it may also sound awkward. In fact, it's a remnant
from when both eMMC/SD cards didn't have dedicated commands/support to
control the internal writeback-cache. In other words, it was the best we
could do at that point in time.

To fix the problem, but also without breaking backwards compatibility,
let's align the REQ_FLUSH support with whether the writeback-cache became
successfully enabled - for both eMMC and SD cards.

Cc: stable@kernel.org
Fixes: 881d1c25f765 ("mmc: core: Add cache control for eMMC4.5 device")
Fixes: 130206a615a9 ("mmc: core: Add support for cache ctrl for SD cards")
Depends-on: 97fce126e279 ("mmc: block: Issue a cache flush only when it's enabled")
Reviewed-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Michael Wu <michael@allwinnertech.com>
Link: https://lore.kernel.org/r/20220331073223.106415-1-michael@allwinnertech.com
[Ulf: Re-wrote the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: renesas_sdhi: don't overwrite TAP settings when HS400 tuning is complete

commit 03e59b1e2f56245163b14c69e0a830c24b1a3a47 upstream.

When HS400 tuning is complete and HS400 is going to be activated, we
have to keep the current number of TAPs and should not overwrite them
with a hardcoded value. This was probably a copy&paste mistake when
upporting HS400 support from the BSP.

Fixes: 26eb2607fa28 ("mmc: renesas_sdhi: add eMMC HS400 mode support")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220404114902.12175-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: mmci: stm32: correctly check all elements of sg list

commit 0d319dd5a27183b75d984e3dc495248e59f99334 upstream.

Use sg and not data->sg when checking sg list elements. Else only the
first element alignment is checked.
The last element should be checked the same way, for_each_sg already set
sg to sg_next(sg).

Fixes: 46b723dd867d ("mmc: mmci: add stm32 sdmmc variant")
Cc: stable@vger.kernel.org
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Link: https://lore.kernel.org/r/20220317111944.116148-2-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: block: Check for errors after write on SPI

commit 5d435933376962b107bd76970912e7e80247dcc7 upstream.

Introduce a SEND_STATUS check for writes through SPI to not mark
an unsuccessful write as successful.

Since SPI SD/MMC does not have states, after a write, the card will
just hold the line LOW until it is ready again. The driver marks the
write therefore as completed as soon as it reads something other than
all zeroes.
The driver does not distinguish from a card no longer signalling busy
and it being disconnected (and the line being pulled-up by the host).
This lead to writes being marked as successful when disconnecting
a busy card.
Now the card is ensured to be still connected by an additional CMD13,
just like non-SPI is ensured to go back to TRAN state.

While at it and since we already poll for the post-write status anyway,
we might as well check for SPIs error bits (any of them).

The disconnecting card problem is reproducable for me after continuous
write activity and randomly disconnecting, around every 20-50 tries
on SPI DS for some card.

Fixes: 7213d175e3b6f ("MMC/SD card driver learns SPI")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/76f6f5d2b35543bab3dfe438f268609c@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"

commit 7e2646ed47542123168d43916b84b954532e5386 upstream.

This reverts commit bb32e1987bc55ce1db400faf47d85891da3c9b9f.

Commit 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization")
contains proper fix for the issue described in commit bb32e1987bc5 ("mmc:
sdhci-xenon: fix annoying 1.8V regulator warning").

Fixes: 8d876bf472db ("mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable")
Cc: stable@vger.kernel.org # 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/20220318141441.32329-1-pali@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: ufs-pci: Add support for Intel MTL

commit 4049f7acef3eb37c1ea0df45f3ffc29404f4e708 upstream.

Add PCI ID and callbacks to support Intel Meteor Lake (MTL).

Link: https://lore.kernel.org/r/20220404055038.2208051-1-adrian.hunter@intel.com
Cc: stable@vger.kernel.org # v5.15+
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: Fix use after free in _scsih_expander_node_remove()

commit 87d663d40801dffc99a5ad3b0188ad3e2b4d1557 upstream.

The function mpt3sas_transport_port_remove() called in
_scsih_expander_node_remove() frees the port field of the sas_expander
structure, leading to the following use-after-free splat from KASAN when
the ioc_info() call following that function is executed (e.g. when doing
rmmod of the driver module):

[ 3479.371167] ==================================================================
[ 3479.378496] BUG: KASAN: use-after-free in _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.386936] Read of size 1 at addr ffff8881c037691c by task rmmod/1531
[ 3479.393524]
[ 3479.395035] CPU: 18 PID: 1531 Comm: rmmod Not tainted 5.17.0-rc8+ #1436
[ 3479.401712] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.1 06/02/2021
[ 3479.409263] Call Trace:
[ 3479.411743]  <TASK>
[ 3479.413875]  dump_stack_lvl+0x45/0x59
[ 3479.417582]  print_address_description.constprop.0+0x1f/0x120
[ 3479.423389]  ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.429469]  kasan_report.cold+0x83/0xdf
[ 3479.433438]  ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.439514]  _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.445411]  ? _raw_spin_unlock_irqrestore+0x2d/0x40
[ 3479.452032]  scsih_remove+0x525/0xc90 [mpt3sas]
[ 3479.458212]  ? mpt3sas_expander_remove+0x1d0/0x1d0 [mpt3sas]
[ 3479.465529]  ? down_write+0xde/0x150
[ 3479.470746]  ? up_write+0x14d/0x460
[ 3479.475840]  ? kernfs_find_ns+0x137/0x310
[ 3479.481438]  pci_device_remove+0x65/0x110
[ 3479.487013]  __device_release_driver+0x316/0x680
[ 3479.493180]  driver_detach+0x1ec/0x2d0
[ 3479.498499]  bus_remove_driver+0xe7/0x2d0
[ 3479.504081]  pci_unregister_driver+0x26/0x250
[ 3479.510033]  _mpt3sas_exit+0x2b/0x6cf [mpt3sas]
[ 3479.516144]  __x64_sys_delete_module+0x2fd/0x510
[ 3479.522315]  ? free_module+0xaa0/0xaa0
[ 3479.527593]  ? __cond_resched+0x1c/0x90
[ 3479.532951]  ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 3479.539607]  ? syscall_enter_from_user_mode+0x21/0x70
[ 3479.546161]  ? trace_hardirqs_on+0x1c/0x110
[ 3479.551828]  do_syscall_64+0x35/0x80
[ 3479.556884]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 3479.563402] RIP: 0033:0x7f1fc482483b
...
[ 3479.943087] ==================================================================

Fix this by introducing the local variable port_id to store the port ID
value before executing mpt3sas_transport_port_remove(). This local variable
is then used in the call to ioc_info() instead of dereferencing the freed
port structure.

Link: https://lore.kernel.org/r/20220322055702.95276-1-damien.lemoal@opensource.wdc.com
Fixes: 7d310f241001 ("scsi: mpt3sas: Get device objects using sas_address & portID")
Cc: stable@vger.kernel.org
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Add part number for Arm Cortex-A78AE

commit 83bea32ac7ed37bbda58733de61fc9369513f9f9 upstream.

Add the MIDR part number info for the Arm Cortex-A78AE[1] and add it to
spectre-BHB affected list[2].

[1]: https://developer.arm.com/Processors/Cortex-A78AE
[2]: https://developer.arm.com/Arm%20Security%20Center/Spectre-BHB

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220407091128.8700-1-chanho61.park@samsung.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf session: Remap buf if there is no space for event

[ Upstream commit bc21e74d4775f883ae1f542c1f1dc7205b15d925 ]

If a perf event doesn't fit into remaining buffer space return NULL to
remap buf and fetch the event again.

Keep the logic to error out on inadequate input from fuzzing.

This fixes perf failing on ChromeOS (with 32b userspace):

  $ perf report -v -i perf.data
  ...
  prefetch_event: head=0x1fffff8 event->header_size=0x30, mmap_size=0x2000000: fuzzed or compressed perf.data?
  Error:
  failed to process sample

Fixes: 57fc032ad643ffd0 ("perf session: Avoid infinite loop when seeing invalid header.size")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Denis Nikitin <denik@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220330031130.2152327-1-denik@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Fix perf's libperf_print callback

[ Upstream commit aeee9dc53ce405d2161f9915f553114e94e5b677 ]

eprintf() does not expect va_list as the type of the 4th parameter.

Use veprintf() because it does.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 428dab813a56ce94 ("libperf: Merge libperf_set_print() into libperf_init()")
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220408132625.2451452-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: arm-spe: Fix perf report --mem-mode

[ Upstream commit ffab487052054162b3b6c9c6005777ec6cfcea05 ]

Since commit bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem
info is not available") "perf mem report" and "perf report --mem-mode"
don't allow opening the file unless one of the events has
PERF_SAMPLE_DATA_SRC set.

SPE doesn't have this set even though synthetic memory data is generated
after it is decoded. Fix this issue by setting DATA_SRC on SPE events.
This has no effect on the data collected because the SPE driver doesn't
do anything with that flag and doesn't generate samples.

Fixes: bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available")
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220408144056.1955535-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/omap: Fix regression in probe for NULL pointer dereference

[ Upstream commit 71ff461c3f41f6465434b9e980c01782763e7ad8 ]

Commit 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") started
triggering a NULL pointer dereference for some omap variants:

__iommu_probe_device from probe_iommu_group+0x2c/0x38
probe_iommu_group from bus_for_each_dev+0x74/0xbc
bus_for_each_dev from bus_iommu_probe+0x34/0x2e8
bus_iommu_probe from bus_set_iommu+0x80/0xc8
bus_set_iommu from omap_iommu_init+0x88/0xcc
omap_iommu_init from do_one_initcall+0x44/0x24

This is caused by omap iommu probe returning 0 instead of ERR_PTR(-ENODEV)
as noted by Jason Gunthorpe <jgg@ziepe.ca>.

Looks like the regression already happened with an earlier commit
6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs")
that changed the function return type and missed converting one place.

Cc: Drew Fustini <dfustini@baylibre.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Suman Anna <s-anna@ti.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Fixes: 6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs")
Fixes: 3f6634d997db ("iommu: Use right way to retrieve iommu_ops")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Drew Fustini <dfustini@baylibre.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220331062301.24269-1-tony@atomide.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: svc_tcp_sendmsg() should handle errors from xdr_alloc_bvec()

[ Upstream commit b056fa070814897be32d83b079dbc311375588e7 ]

The allocation is done with GFP_KERNEL, but it could still fail in a low
memory situation.

Fixes: 4a85a6a3320b ("SUNRPC: Handle TCP socket sends with kernel_sendpage() again")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Handle low memory situations in call_status()

[ Upstream commit 9d82819d5b065348ce623f196bf601028e22ed00 ]

We need to handle ENFILE, ENOBUFS, and ENOMEM, because
xprt_wake_pending_tasks() can be called with any one of these due to
socket creation failures.

Fixes: b61d59fffd3e ("SUNRPC: xs_tcp_connect_worker{4,6}: merge common code")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Handle ENOMEM in call_transmit_status()

[ Upstream commit d3c15033b240767d0287f1c4a529cbbe2d5ded8a ]

Both call_transmit() and call_bc_transmit() can now return ENOMEM, so
let's make sure that we handle the errors gracefully.

Fixes: 0472e4766049 ("SUNRPC: Convert socket page send code to use iov_iter()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: don't touch scm_fp_list after queueing skb

[ Upstream commit a07211e3001435fe8591b992464cd8d5e3c98c5a ]

It's safer to not touch scm_fp_list after we queued an skb to which it
was assigned, there might be races lurking if we screw subtle sync
guarantees on the io_uring side.

Fixes: 6b06314c47e14 ("io_uring: add file set registration")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: nospec index for tags on files update

[ Upstream commit 34bb77184123ae401100a4d156584f12fa630e5c ]

Don't forget to array_index_nospec() for indexes before updating rsrc
tags in __io_sqe_files_update(), just use already safe and precalculated
index @i.

Fixes: c3bdad0271834 ("io_uring: add generic rsrc update with tags")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: ufshpb: Fix a NULL check on list iterator

[ Upstream commit bfb7789bcbd901caead43861461bc8f334c90d3b ]

The list iterator is always non-NULL so the check 'if (!rgn)' is always
false and the dev_err() is never called. Move the check outside the loop
and determine if 'victim_rgn' is NULL, to fix this bug.

Link: https://lore.kernel.org/r/20220320150733.21824-1-xiam0nd.tong@gmail.com
Fixes: 4b5f49079c52 ("scsi: ufs: ufshpb: L2P map management for HPB read")
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drbd: Fix five use after free bugs in get_initial_state

[ Upstream commit aadb22ba2f656581b2f733deb3a467c48cc618f6 ]

In get_initial_state, it calls notify_initial_state_done(skb,..) if
cb->args[5]==1. If genlmsg_put() failed in notify_initial_state_done(),
the skb will be freed by nlmsg_free(skb).
Then get_initial_state will goto out and the freed skb will be used by
return value skb->len, which is a uaf bug.

What's worse, the same problem goes even further: skb can also be
freed in the notify_*_state_change -> notify_*_state calls below.
Thus 4 additional uaf bugs happened.

My patch lets the problem callee functions: notify_initial_state_done
and notify_*_state_change return an error code if errors happen.
So that the error codes could be propagated and the uaf bugs can be avoid.

v2 reports a compilation warning. This v3 fixed this warning and built
successfully in my local environment with no additional warnings.
v2: https://lore.kernel.org/patchwork/patch/1435218/

Fixes: a29728463b254 ("drbd: Backport the "events2" command")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Support dual-stack sockets in bpf_tcp_check_syncookie

[ Upstream commit 2e8702cc0cfa1080f29fd64003c00a3e24ac38de ]

bpf_tcp_gen_syncookie looks at the IP version in the IP header and
validates the address family of the socket. It supports IPv4 packets in
AF_INET6 dual-stack sockets.

On the other hand, bpf_tcp_check_syncookie looks only at the address
family of the socket, ignoring the real IP version in headers, and
validates only the packet size. This implementation has some drawbacks:

1. Packets are not validated properly, allowing a BPF program to trick
   bpf_tcp_check_syncookie into handling an IPv6 packet on an IPv4
   socket.

2. Dual-stack sockets fail the checks on IPv4 packets. IPv4 clients end
   up receiving a SYNACK with the cookie, but the following ACK gets
   dropped.

This patch fixes these issues by changing the checks in
bpf_tcp_check_syncookie to match the ones in bpf_tcp_gen_syncookie. IP
version from the header is taken into account, and it is validated
properly with address family.

Fixes: 399040847084 ("bpf: add helper to check for a valid SYN cookie")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Arthur Fabre <afabre@cloudflare.com>
Link: https://lore.kernel.org/bpf/20220406124113.2795730-1-maximmi@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: bcm-qspi: fix MSPI only access with bcm_qspi_exec_mem_op()

[ Upstream commit 2c7d1b281286c46049cd22b43435cecba560edde ]

This fixes case where MSPI controller is used to access spi-nor
flash and BSPI block is not present.

Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220328142442.7553-1-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qede: confirm skb is allocated before using

[ Upstream commit 4e910dbe36508654a896d5735b318c0b88172570 ]

qede_build_skb() assumes build_skb() always works and goes straight
to skb_reserve(). However, build_skb() can fail under memory pressure.
This results in a kernel panic because the skb to reserve is NULL.

Add a check in case build_skb() failed to allocate and return NULL.

The NULL return is handled correctly in callers to qede_build_skb().

Fixes: 8a8633978b842 ("qede: Add build_skb() support.")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: mscc-miim: reject clause 45 register accesses

[ Upstream commit 8d90991e5bf7fdb9f264f5f579d18969913054b7 ]

The driver doesn't support clause 45 register access yet, but doesn't
check if the access is a c45 one either. This leads to spurious register
reads and writes. Add the check.

Fixes: 542671fe4d86 ("net: phy: mscc-miim: Add MDIO driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sfc: fix using uninitialized xdp tx_queue

[ Upstream commit fb5833d81e4333294add35d3ac7f7f52a7bf107f ]

In some cases, xdp tx_queue can get used before initialization.
1. interface up/down
2. ring buffer size change

When CPU cores are lower than maximum number of channels of sfc driver,
it creates new channels only for XDP.

When an interface is up or ring buffer size is changed, all channels
are initialized.
But xdp channels are always initialized later.
So, the below scenario is possible.
Packets are received to rx queue of normal channels and it is acted
XDP_TX and tx_queue of xdp channels get used.
But these tx_queues are not initialized yet.
If so, TX DMA or queue error occurs.

In order to avoid this problem.
1. initializes xdp tx_queues earlier than other rx_queue in
efx_start_channels().
2. checks whether tx_queue is initialized or not in efx_xdp_tx_buffers().

Splat looks like:
   sfc 0000:08:00.1 enp8s0f1np1: TX queue 10 spurious TX completion id 250
   sfc 0000:08:00.1 enp8s0f1np1: resetting (RECOVER_OR_ALL)
   sfc 0000:08:00.1 enp8s0f1np1: MC command 0x80 inlen 100 failed rc=-22
   (raw=22) arg=789
   sfc 0000:08:00.1 enp8s0f1np1: has been disabled

Fixes: f28100cb9c96 ("sfc: fix lack of XDP TX queues - error XDP TX failed (-22)")
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: fix a race in rxrpc_exit_net()

[ Upstream commit 1946014ca3b19be9e485e780e862c375c6f98bad ]

Current code can lead to the following race:

CPU0                                                 CPU1

rxrpc_exit_net()
                                                     rxrpc_peer_keepalive_worker()
                                                       if (rxnet->live)

  rxnet->live = false;
  del_timer_sync(&rxnet->peer_keepalive_timer);

                                                             timer_reduce(&rxnet->peer_keepalive_timer, jiffies + delay);

  cancel_work_sync(&rxnet->peer_keepalive_work);

rxrpc_exit_net() exits while peer_keepalive_timer is still armed,
leading to use-after-free.

syzbot report was:

ODEBUG: free active (active state 0) object type: timer_list hint: rxrpc_peer_keepalive_timeout+0x0/0xb0
WARNING: CPU: 0 PID: 3660 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Modules linked in:
CPU: 0 PID: 3660 Comm: kworker/u4:6 Not tainted 5.17.0-syzkaller-13993-g88e6c0207623 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd 00 1c 26 8a 4c 89 ee 48 c7 c7 00 10 26 8a e8 b1 e7 28 05 <0f> 0b 83 05 15 eb c5 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3
RSP: 0018:ffffc9000353fb00 EFLAGS: 00010082
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: ffff888029196140 RSI: ffffffff815efad8 RDI: fffff520006a7f52
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815ea4ae R11: 0000000000000000 R12: ffffffff89ce23e0
R13: ffffffff8a2614e0 R14: ffffffff816628c0 R15: dffffc0000000000
FS:  0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1f2908924 CR3: 0000000043720000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __debug_check_no_obj_freed lib/debugobjects.c:992 [inline]
 debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1023
 kfree+0xd6/0x310 mm/slab.c:3809
 ops_free_list.part.0+0x119/0x370 net/core/net_namespace.c:176
 ops_free_list net/core/net_namespace.c:174 [inline]
 cleanup_net+0x591/0xb00 net/core/net_namespace.c:598
 process_one_work+0x996/0x1610 kernel/workqueue.c:2289
 worker_thread+0x665/0x1080 kernel/workqueue.c:2436
 kthread+0x2e9/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298
 </TASK>

Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: linux-afs@lists.infradead.org
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: openvswitch: fix leak of nested actions

[ Upstream commit 1f30fb9166d4f15a1aa19449b9da871fe0ed4796 ]

While parsing user-provided actions, openvswitch module may dynamically
allocate memory and store pointers in the internal copy of the actions.
So this memory has to be freed while destroying the actions.

Currently there are only two such actions: ct() and set().  However,
there are many actions that can hold nested lists of actions and
ovs_nla_free_flow_actions() just jumps over them leaking the memory.

For example, removal of the flow with the following actions will lead
to a leak of the memory allocated by nf_ct_tmpl_alloc():

  actions:clone(ct(commit),0)

Non-freed set() action may also leak the 'dst' structure for the
tunnel info including device references.

Under certain conditions with a high rate of flow rotation that may
cause significant memory leak problem (2MB per second in reporter's
case).  The problem is also hard to mitigate, because the user doesn't
have direct control over the datapath flows generated by OVS.

Fix that by iterating over all the nested actions and freeing
everything that needs to be freed recursively.

New build time assertion should protect us from this problem if new
actions will be added in the future.

Unfortunately, openvswitch module doesn't use NLA_F_NESTED, so all
attributes has to be explicitly checked.  sample() and clone() actions
are mixing extra attributes into the user-provided action list.  That
prevents some code generalization too.

Fixes: 34ae932a4036 ("openvswitch: Make tunnel set action attach a metadata dst")
Link: https://mail.openvswitch.org/pipermail/ovs-dev/2022-March/392922.html
Reported-by: Stéphane Graber <stgraber@ubuntu.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address()

[ Upstream commit 11f8e7c122ce013fa745029fa8c94c6db69c2e54 ]

There is often not a MAC address available in an EEPROM accessible by
Linux with Marvell devices. Instead the bootload has the MAC address
and directly programs it into the hardware. So don't consider an error
from of_get_mac_address() has fatal. However, the check was added for
the case where there is a MAC address in an the EEPROM, but the EEPROM
has not probed yet, and -EPROBE_DEFER is returned. In that case the
error should be returned. So make the check specific to this error
code.

Cc: Mauri Sandberg <maukka@ext.kapsi.fi>
Reported-by: Thomas Walther <walther-it@gmx.de>
Fixes: 42404d8f1c01 ("net: mv643xx_eth: process retval from of_get_mac_address")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220405000404.3374734-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: openvswitch: don't send internal clone attribute to the userspace.

[ Upstream commit 3f2a3050b4a3e7f32fc0ea3c9b0183090ae00522 ]

'OVS_CLONE_ATTR_EXEC' is an internal attribute that is used for
performance optimization inside the kernel.  It's added by the kernel
while parsing user-provided actions and should not be sent during the
flow dump as it's not part of the uAPI.

The issue doesn't cause any significant problems to the ovs-vswitchd
process, because reported actions are not really used in the
application lifecycle and only supposed to be shown to a human via
ovs-dpctl flow dump.  However, the action list is still incorrect
and causes the following error if the user wants to look at the
datapath flows:

  # ovs-dpctl add-dp system@ovs-system
  # ovs-dpctl add-flow "<flow match>" "clone(ct(commit),0)"
  # ovs-dpctl dump-flows
  <flow match>, packets:0, bytes:0, used:never,
    actions:clone(bad length 4, expected -1 for: action0(01 00 00 00),
                  ct(commit),0)

With the fix:

  # ovs-dpctl dump-flows
  <flow match>, packets:0, bytes:0, used:never,
    actions:clone(ct(commit),0)

Additionally fixed an incorrect attribute name in the comment.

Fixes: b233504033db ("openvswitch: kernel datapath clone action")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20220404104150.2865736-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: xsk: fix VSI state check in ice_xsk_wakeup()

[ Upstream commit 72b915a2b444e9247c9d424a840e94263db07c27 ]

ICE_DOWN is dedicated for pf->state. Check for ICE_VSI_DOWN being set on
vsi->state in ice_xsk_wakeup().

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: synchronize_rcu() when terminating rings

[ Upstream commit f9124c68f05ffdb87a47e3ea6d5fae9dad7cb6eb ]

Unfortunately, the ice driver doesn't respect the RCU critical section that
XSK wakeup is surrounded with. To fix this, add synchronize_rcu() calls to
paths that destroy resources that might be in use.

This was addressed in other AF_XDP ZC enabled drivers, for reference see
for example commit b3873a5be757 ("net/i40e: Fix concurrency issues
between config flow and XSK")

Fixes: efc2214b6047 ("ice: Add support for XDP")
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: Fix stats accounting in ip6_pkt_drop

[ Upstream commit 1158f79f82d437093aeed87d57df0548bdd68146 ]

VRF devices are the loopbacks for VRFs, and a loopback can not be
assigned to a VRF. Accordingly, the condition in ip6_pkt_drop should
be '||' not '&&'.

Fixes: 1d3fd8a10bed ("vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreach")
Reported-by: Pudak, Filip <Filip.Pudak@windriver.com>
Reported-by: Xiao, Jiguang <Jiguang.Xiao@windriver.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220404150908.2937-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Do not skip not enabled queues in ice_vc_dis_qs_msg

[ Upstream commit 05ef6813b234db3196f083b91db3963f040b65bb ]

Disable check for queue being enabled in ice_vc_dis_qs_msg, because
there could be a case when queues were created, but were not enabled.
We still need to delete those queues.

Normal workflow for VF looks like:
Enable path:
VIRTCHNL_OP_ADD_ETH_ADDR (opcode 10)
VIRTCHNL_OP_CONFIG_VSI_QUEUES (opcode 6)
VIRTCHNL_OP_ENABLE_QUEUES (opcode 8)

Disable path:
VIRTCHNL_OP_DISABLE_QUEUES (opcode 9)
VIRTCHNL_OP_DEL_ETH_ADDR (opcode 11)

The issue appears only in stress conditions when VF is enabled and
disabled very fast.
Eventually there will be a case, when queues are created by
VIRTCHNL_OP_CONFIG_VSI_QUEUES, but are not enabled by
VIRTCHNL_OP_ENABLE_QUEUES.
In turn, these queues are not deleted by VIRTCHNL_OP_DISABLE_QUEUES,
because there is a check whether queues are enabled in
ice_vc_dis_qs_msg.

When we bring up the VF again, we will see the "Failed to set LAN Tx queue
context" error during VIRTCHNL_OP_CONFIG_VSI_QUEUES step. This
happens because old 16 queues were not deleted and VF requests to create
16 more, but ice_sched_get_free_qparent in ice_ena_vsi_txq would fail to
find a parent node for first newly requested queue (because all nodes
are allocated to 16 old queues).

Testing Hints:

Just enable and disable VF fast enough, so it would be disabled before
reaching VIRTCHNL_OP_ENABLE_QUEUES.

while true; do
        ip link set dev ens785f0v0 up
        sleep 0.065 # adjust delay value for you machine
        ip link set dev ens785f0v0 down
done

Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Set txq_teid to ICE_INVAL_TEID on ring creation

[ Upstream commit ccfee1822042b87e5135d33cad8ea353e64612d2 ]

When VF is freshly created, but not brought up, ring->txq_teid
value is by default set to 0.
But 0 is a valid TEID. On some platforms the Root Node of
Tx scheduler has a TEID = 0. This can cause issues as shown below.

The proper way is to set ring->txq_teid to ICE_INVAL_TEID (0xFFFFFFFF).

Testing Hints:
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
ip link set dev ens785f0v0 up
ip link set dev ens785f0v0 down

If we have freshly created VF and quickly turn it on and off, so there
would be no time to reach VIRTCHNL_OP_CONFIG_VSI_QUEUES stage, then
VIRTCHNL_OP_DISABLE_QUEUES stage will fail with error:
[  639.531454] disable queue 89 failed 14
[  639.532233] Failed to disable LAN Tx queues, error: ICE_ERR_AQ_ERROR
[  639.533107] ice 0000:02:00.0: Failed to stop Tx ring 0 on VSI 5

The reason for the fail is that we are trying to send AQ command to
delete queue 89, which has never been created and receive an "invalid
argument" error from firmware.

As this queue has never been created, it's teid and ring->txq_teid
have default value 0.
ice_dis_vsi_txq has a check against non-existent queues:

node = ice_sched_find_node_by_teid(pi->root, q_teids[i]);
if (!node)
continue;

But on some platforms the Root Node of Tx scheduler has a teid = 0.
Hence, ice_sched_find_node_by_teid finds a node with teid = 0 (it is
pi->root), and we go further to submit an erroneous request to firmware.

Fixes: 37bb83901286 ("ice: Move common functions out of ice_main.c part 7/7")
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dpaa2-ptp: Fix refcount leak in dpaa2_ptp_probe

[ Upstream commit 2b04bd4f03bba021959ca339314f6739710f0954 ]

This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak.

Fixes: d346c9e86d86 ("dpaa2-ptp: reuse ptp_qoriq driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220404125336.13427-1-linmq006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: count singleton chunks in assoc user stats

[ Upstream commit e3d37210df5c41c51147a2d5d465de1a4d77be7a ]

Singleton chunks (INIT, HEARTBEAT PMTU probes, and SHUTDOWN-
COMPLETE) are not counted in SCTP_GET_ASOC_STATS "sas_octrlchunks"
counter available to the assoc owner.

These are all control chunks so they should be counted as such.

Add counting of singleton chunks so they are properly accounted for.

Fixes: 196d67593439 ("sctp: Add support to per-association statistics via a new SCTP_GET_ASSOC_STATS call")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/c9ba8785789880cf07923b8a5051e174442ea9ee.1649029663.git.jamie.bainbridge@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/rdmavt: add lock to call to rvt_error_qp to prevent a race condition

[ Upstream commit 4d809f69695d4e7d1378b3a072fa9aef23123018 ]

The documentation of the function rvt_error_qp says both r_lock and s_lock
need to be held when calling that function.  It also asserts using lockdep
that both of those locks are held.  However, the commit I referenced in
Fixes accidentally makes the call to rvt_error_qp in rvt_ruc_loopback no
longer covered by r_lock.  This results in the lockdep assertion failing
and also possibly in a race condition.

Fixes: d757c60eca9b ("IB/rdmavt: Fix concurrency panics in QP post_send and modify to error")
Link: https://lore.kernel.org/r/20220228165330.41546-1-dossche.niels@gmail.com
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/cm: Cancel mad on the DREQ event when the state is MRA_REP_RCVD

[ Upstream commit 107dd7beba403a363adfeb3ffe3734fe38a05cce ]

On the passive side when the disconnectReq event comes, if the current
state is MRA_REP_RCVD, it needs to cancel the MAD before entering the
DREQ_RCVD and TIMEWAIT states, otherwise the destroy_id may block until
this mad will reach timeout.

Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/75261c00c1d82128b1d981af9ff46e994186e621.1649062436.git.leonro@nvidia.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Add a missing update of cache->last_add

[ Upstream commit 1d735eeee63a0beb65180ca0224f239cc0c9f804 ]

Update cache->last_add when returning an MR to the cache so that the cache
work won't remove it.

Fixes: b9358bdbc713 ("RDMA/mlx5: Fix locking in MR cache work queue")
Link: https://lore.kernel.org/r/c99f076fce4b44829d434936bbcd3b5fc4c95020.1649062436.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Don't remove cache MRs when a delay is needed

[ Upstream commit 84c2362fb65d69c721fec0974556378cbb36a62b ]

Don't remove MRs from the cache if need to delay the removal.

Fixes: b9358bdbc713 ("RDMA/mlx5: Fix locking in MR cache work queue")
Link: https://lore.kernel.org/r/c3087a90ff362c8796c7eaa2715128743ce36722.1649062436.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: Do not free an empty page_ring

[ Upstream commit 458f5d92df4807e2a7c803ed928369129996bf96 ]

When the page_ring is not used page_ptr_mask is 0.
Do not dereference page_ring[0] in this case.

Fixes: 2768935a4660 ("sfc: reuse pages to avoid DMA mapping/unmapping costs")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Prevent XDP redirect from running when stopping TX queue

[ Upstream commit 27d4073f8d9af0340362554414f4961643a4f4de ]

Add checks in the XDP redirect callback to prevent XDP from running when
the TX ring is undergoing shutdown.

Also remove redundant checks in the XDP redirect callback to validate the
txr and the flag that indicates the ring supports XDP. The modulo
arithmetic on 'tx_nr_rings_xdp' already guarantees the derived TX
ring is an XDP ring.  txr is also guaranteed to be valid after checking
BNXT_STATE_OPEN and within RCU grace period.

Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support")
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: reserve space inside receive page for skb_shared_info

[ Upstream commit facc173cf700e55b2ad249ecbd3a7537f7315691 ]

Insufficient space was being reserved in the page used for packet
reception, so the interface MTU could be set too large to still have
room for the contents of the packet when doing XDP redirect.  This
resulted in the following message when redirecting a packet between
3520 and 3822 bytes with an MTU of 3822:

[311815.561880] XDP_WARN: xdp_update_frame_from_buff(line:200): Driver BUG: missing reserved tailroom

Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Synchronize tx when xdp redirects happen on same ring

[ Upstream commit 4f81def272de17dc4bbd89ac38f49b2676c9b3d2 ]

If there are more CPUs than the number of TX XDP rings, multiple XDP
redirects can select the same TX ring based on the CPU on which
XDP redirect is called.  Add locking when needed and use static
key to decide whether to take the lock.

Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support")
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arch/arm64: Fix topology initialization for core scheduling

[ Upstream commit 5524cbb1bfcdff0cad0aaa9f94e6092002a07259 ]

Arm64 systems rely on store_cpu_topology() to call update_siblings_masks()
to transfer the toplogy to the various cpu masks. This needs to be done
before the call to notify_cpu_starting() which tells the scheduler about
each cpu found, otherwise the core scheduling data structures are setup
in a way that does not match the actual topology.

With smt_mask not setup correctly we bail on `cpumask_weight(smt_mask) == 1`
for !leaders in:

 notify_cpu_starting()
   cpuhp_invoke_callback_range()
     sched_cpu_starting()
       sched_core_cpu_starting()

which leads to rq->core not being correctly set for !leader-rq's.

Without this change stress-ng (which enables core scheduling in its prctl
tests in newer versions -- i.e. with PR_SCHED_CORE support) causes a warning
and then a crash (trimmed for legibility):

[ 1853.805168] ------------[ cut here ]------------
[ 1853.809784] task_rq(b)->core != rq->core
[ 1853.809792] WARNING: CPU: 117 PID: 0 at kernel/sched/fair.c:11102 cfs_prio_less+0x1b4/0x1c4
...
[ 1854.015210] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
...
[ 1854.231256] Call trace:
[ 1854.233689]  pick_next_task+0x3dc/0x81c
[ 1854.237512]  __schedule+0x10c/0x4cc
[ 1854.240988]  schedule_idle+0x34/0x54

Fixes: 9edeaea1bc45 ("sched: Core-wide rq->lock")
Signed-off-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20220331153926.25742-1-pauld@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: atc260x: Fix missing active_discharge_on setting

[ Upstream commit 2316f0fc0ad2aa87a568ceaf3d76be983ee555c3 ]

Without active_discharge_on setting, the SWITCH1 discharge enable control
is always disabled. Fix it.

Fixes: 3b15ccac161a ("regulator: Add regulator driver for ATC260x PMICs")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20220403132235.123727-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: rtq2134: Fix missing active_discharge_on setting

[ Upstream commit 17049bf9de55a42ee96fd34520aff8a484677675 ]

The active_discharge_on setting was missed, so output discharge resistor
is always disabled. Fix it.

Fixes: 0555d41497de ("regulator: rtq2134: Add support for Richtek RTQ2134 SubPMIC")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20220404022514.449231-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/imx: dw_hdmi-imx: Fix bailout in error cases of probe

[ Upstream commit e8083acc3f8cc2097917018e947fd4c857f60454 ]

In dw_hdmi_imx_probe(), if error happens after dw_hdmi_probe() returns
successfully, dw_hdmi_remove() should be called where necessary as
bailout.

Fixes: c805ec7eb210 ("drm/imx: dw_hdmi-imx: move initialization into probe")
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220128091944.3831256-1-victor.liu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/imx: Fix memory leak in imx_pd_connector_get_modes

[ Upstream commit bce81feb03a20fca7bbdd1c4af16b4e9d5c0e1d3 ]

Avoid leaking the display mode variable if of_get_drm_display_mode
fails.

Fixes: 76ecd9c9fb24 ("drm/imx: parallel-display: check return code from of_get_drm_display_mode()")
Addresses-Coverity-ID: 1443943 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220108165230.44610-1-jose.exposito89@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/imx: imx-ldb: Check for null pointer after calling kmemdup

[ Upstream commit 8027a9ad9b3568c5eb49c968ad6c97f279d76730 ]

As the possible failure of the allocation, kmemdup() may return NULL
pointer.
Therefore, it should be better to check the return value of kmemdup()
and return error if fails.

Fixes: dc80d7038883 ("drm/imx-ldb: Add support to drm-bridge")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220105074729.2363657-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: Fix unset max_speed difference between DT and non-DT platforms

[ Upstream commit c21cabb0fd0b54b8b54235fc1ecfe1195a23bcb2 ]

In commit 9cbadf094d9d ("net: stmmac: support max-speed device tree
property"), when DT platforms don't set "max-speed", max_speed is set to
-1; for non-DT platforms, it stays the default 0.

Prior to commit eeef2f6b9f6e ("net: stmmac: Start adding phylink support"),
the check for a valid max_speed setting was to check if it was greater
than zero. This commit got it right, but subsequent patches just checked
for non-zero, which is incorrect for DT platforms.

In commit 92c3807b9ac3 ("net: stmmac: convert to phylink_get_linkmodes()")
the conversion switched completely to checking for non-zero value as a
valid value, which caused 1000base-T to stop getting advertised by
default.

Instead of trying to fix all the checks, simply leave max_speed alone if
DT property parsing fails.

Fixes: 9cbadf094d9d ("net: stmmac: support max-speed device tree property")
Fixes: 92c3807b9ac3 ("net: stmmac: convert to phylink_get_linkmodes()")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220331184832.16316-1-wens@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipv4: fix route with nexthop object delete warning

[ Upstream commit 6bf92d70e690b7ff12b24f4bfff5e5434d019b82 ]

FRR folks have hit a kernel warning[1] while deleting routes[2] which is
caused by trying to delete a route pointing to a nexthop id without
specifying nhid but matching on an interface. That is, a route is found
but we hit a warning while matching it. The warning is from
fib_info_nh() in include/net/nexthop.h because we run it on a fib_info
with nexthop object. The call chain is:
 inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a
nexthop fib_info and also with fc_oif set thus calling fib_info_nh on
the fib_info and triggering the warning). The fix is to not do any
matching in that branch if the fi has a nexthop object because those are
managed separately. I.e. we should match when deleting without nh spec and
should fail when deleting a nexthop route with old-style nh spec because
nexthop objects are managed separately, e.g.:
 $ ip r show 1.2.3.4/32
 1.2.3.4 nhid 12 via 192.168.11.2 dev dummy0

 $ ip r del 1.2.3.4/32
 $ ip r del 1.2.3.4/32 nhid 12
 <both should work>

 $ ip r del 1.2.3.4/32 dev dummy0
 <should fail with ESRCH>

[1]
 [  523.462226] ------------[ cut here ]------------
 [  523.462230] WARNING: CPU: 14 PID: 22893 at include/net/nexthop.h:468 fib_nh_match+0x210/0x460
 [  523.462236] Modules linked in: dummy rpcsec_gss_krb5 xt_socket nf_socket_ipv4 nf_socket_ipv6 ip6table_raw iptable_raw bpf_preload xt_statistic ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs xt_mark nf_tables xt_nat veth nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay dm_crypt nfsv3 nfs fscache netfs vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack 8021q garp mrp ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bridge stp llc rfcomm snd_seq_dummy snd_hrtimer rpcrdma rdma_cm iw_cm ib_cm ib_core ip6table_filter xt_comment ip6_tables vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) qrtr bnep binfmt_misc xfs vfat fat squashfs loop nvidia_drm(POE) nvidia_modeset(POE) nvidia_uvm(POE) nvidia(POE) intel_rapl_msr intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi btusb btrtl iwlmvm uvcvideo btbcm snd_hda_intel edac_mce_amd
 [  523.462274]  videobuf2_vmalloc videobuf2_memops btintel snd_intel_dspcfg videobuf2_v4l2 snd_intel_sdw_acpi bluetooth snd_usb_audio snd_hda_codec mac80211 snd_usbmidi_lib joydev snd_hda_core videobuf2_common kvm_amd snd_rawmidi snd_hwdep snd_seq videodev ccp snd_seq_device libarc4 ecdh_generic mc snd_pcm kvm iwlwifi snd_timer drm_kms_helper snd cfg80211 cec soundcore irqbypass rapl wmi_bmof i2c_piix4 rfkill k10temp pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc drm zram ip_tables crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel nvme sp5100_tco r8169 nvme_core wmi ipmi_devintf ipmi_msghandler fuse
 [  523.462300] CPU: 14 PID: 22893 Comm: ip Tainted: P           OE     5.16.18-200.fc35.x86_64 #1
 [  523.462302] Hardware name: Micro-Star International Co., Ltd. MS-7C37/MPG X570 GAMING EDGE WIFI (MS-7C37), BIOS 1.C0 10/29/2020
 [  523.462303] RIP: 0010:fib_nh_match+0x210/0x460
 [  523.462304] Code: 7c 24 20 48 8b b5 90 00 00 00 e8 bb ee f4 ff 48 8b 7c 24 20 41 89 c4 e8 ee eb f4 ff 45 85 e4 0f 85 2e fe ff ff e9 4c ff ff ff <0f> 0b e9 17 ff ff ff 3c 0a 0f 85 61 fe ff ff 48 8b b5 98 00 00 00
 [  523.462306] RSP: 0018:ffffaa53d4d87928 EFLAGS: 00010286
 [  523.462307] RAX: 0000000000000000 RBX: ffffaa53d4d87a90 RCX: ffffaa53d4d87bb0
 [  523.462308] RDX: ffff9e3d2ee6be80 RSI: ffffaa53d4d87a90 RDI: ffffffff920ed380
 [  523.462309] RBP: ffff9e3d2ee6be80 R08: 0000000000000064 R09: 0000000000000000
 [  523.462310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000031
 [  523.462310] R13: 0000000000000020 R14: 0000000000000000 R15: ffff9e3d331054e0
 [  523.462311] FS:  00007f245517c1c0(0000) GS:ffff9e492ed80000(0000) knlGS:0000000000000000
 [  523.462313] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [  523.462313] CR2: 000055e5dfdd8268 CR3: 00000003ef488000 CR4: 0000000000350ee0
 [  523.462315] Call Trace:
 [  523.462316]  <TASK>
 [  523.462320]  fib_table_delete+0x1a9/0x310
 [  523.462323]  inet_rtm_delroute+0x93/0x110
 [  523.462325]  rtnetlink_rcv_msg+0x133/0x370
 [  523.462327]  ? _copy_to_iter+0xb5/0x6f0
 [  523.462330]  ? rtnl_calcit.isra.0+0x110/0x110
 [  523.462331]  netlink_rcv_skb+0x50/0xf0
 [  523.462334]  netlink_unicast+0x211/0x330
 [  523.462336]  netlink_sendmsg+0x23f/0x480
 [  523.462338]  sock_sendmsg+0x5e/0x60
 [  523.462340]  ____sys_sendmsg+0x22c/0x270
 [  523.462341]  ? import_iovec+0x17/0x20
 [  523.462343]  ? sendmsg_copy_msghdr+0x59/0x90
 [  523.462344]  ? __mod_lruvec_page_state+0x85/0x110
 [  523.462348]  ___sys_sendmsg+0x81/0xc0
 [  523.462350]  ? netlink_seq_start+0x70/0x70
 [  523.462352]  ? __dentry_kill+0x13a/0x180
 [  523.462354]  ? __fput+0xff/0x250
 [  523.462356]  __sys_sendmsg+0x49/0x80
 [  523.462358]  do_syscall_64+0x3b/0x90
 [  523.462361]  entry_SYSCALL_64_after_hwframe+0x44/0xae
 [  523.462364] RIP: 0033:0x7f24552aa337
 [  523.462365] Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
 [  523.462366] RSP: 002b:00007fff7f05a838 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 [  523.462368] RAX: ffffffffffffffda RBX: 000000006245bf91 RCX: 00007f24552aa337
 [  523.462368] RDX: 0000000000000000 RSI: 00007fff7f05a8a0 RDI: 0000000000000003
 [  523.462369] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
 [  523.462370] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000001
 [  523.462370] R13: 00007fff7f05ce08 R14: 0000000000000000 R15: 000055e5dfdd1040
 [  523.462373]  </TASK>
 [  523.462374] ---[ end trace ba537bc16f6bf4ed ]---

[2] https://github.com/FRRouting/frr/issues/6412

Fixes: 4c7e8084fd46 ("ipv4: Plumb support for nexthop object in a fib_info")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mctp: Fix check for dev_hard_header() result

[ Upstream commit 60be976ac45137657b7b505d7e0d44d0e51accb7 ]

dev_hard_header() returns the length of the header, so
we need to test for negative errors rather than non-zero.

Fixes: 889b7da23abf ("mctp: Add initial routing framework")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Clear default forwarding VSI during VSI release

[ Upstream commit bd8c624c0cd59de0032752ba3001c107bba97f7b ]

VSI is set as default forwarding one when promisc mode is set for
PF interface, when PF is switched to switchdev mode or when VF
driver asks to enable allmulticast or promisc mode for the VF
interface (when vf-true-promisc-support priv flag is off).
The third case is buggy because in that case VSI associated with
VF remains as default one after VF removal.

Reproducer:
1. Create VF
   echo 1 > sys/class/net/ens7f0/device/sriov_numvfs
2. Enable allmulticast or promisc mode on VF
   ip link set ens7f0v0 allmulticast on
   ip link set ens7f0v0 promisc on
3. Delete VF
   echo 0 > sys/class/net/ens7f0/device/sriov_numvfs
4. Try to enable promisc mode on PF
   ip link set ens7f0 promisc on

Although it looks that promisc mode on PF is enabled the opposite
is true because ice_vsi_sync_fltr() responsible for IFF_PROMISC
handling first checks if any other VSI is set as default forwarding
one and if so the function does not do anything. At this point
it is not possible to enable promisc mode on PF without re-probe
device.

To resolve the issue this patch clear default forwarding VSI
during ice_vsi_release() when the VSI to be released is the default
one.

Fixes: 01b5e89aab49 ("ice: Add VF promiscuous support")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

skbuff: fix coalescing for page_pool fragment recycling

[ Upstream commit 1effe8ca4e34c34cdd9318436a4232dcb582ebf4 ]

Fix a use-after-free when using page_pool with page fragments. We
encountered this problem during normal RX in the hns3 driver:

(1) Initially we have three descriptors in the RX queue. The first one
    allocates PAGE1 through page_pool, and the other two allocate one
    half of PAGE2 each. Page references look like this:

                RX_BD1 _______ PAGE1
                RX_BD2 _______ PAGE2
                RX_BD3 _________/

(2) Handle RX on the first descriptor. Allocate SKB1, eventually added
    to the receive queue by tcp_queue_rcv().

(3) Handle RX on the second descriptor. Allocate SKB2 and pass it to
    netif_receive_skb():

    netif_receive_skb(SKB2)
      ip_rcv(SKB2)
        SKB3 = skb_clone(SKB2)

    SKB2 and SKB3 share a reference to PAGE2 through
    skb_shinfo()->dataref. The other ref to PAGE2 is still held by
    RX_BD3:

                      SKB2 ---+- PAGE2
                      SKB3 __/   /
                RX_BD3 _________/

 (3b) Now while handling TCP, coalesce SKB3 with SKB1:

      tcp_v4_rcv(SKB3)
        tcp_try_coalesce(to=SKB1, from=SKB3)    // succeeds
        kfree_skb_partial(SKB3)
          skb_release_data(SKB3)                // drops one dataref

                      SKB1 _____ PAGE1
                           \____
                      SKB2 _____ PAGE2
                                 /
                RX_BD3 _________/

    In skb_try_coalesce(), __skb_frag_ref() takes a page reference to
    PAGE2, where it should instead have increased the page_pool frag
    reference, pp_frag_count. Without coalescing, when releasing both
    SKB2 and SKB3, a single reference to PAGE2 would be dropped. Now
    when releasing SKB1 and SKB2, two references to PAGE2 will be
    dropped, resulting in underflow.

 (3c) Drop SKB2:

      af_packet_rcv(SKB2)
        consume_skb(SKB2)
          skb_release_data(SKB2)                // drops second dataref
            page_pool_return_skb_page(PAGE2)    // drops one pp_frag_count

                      SKB1 _____ PAGE1
                           \____
                                 PAGE2
                                 /
                RX_BD3 _________/

(4) Userspace calls recvmsg()
    Copies SKB1 and releases it. Since SKB3 was coalesced with SKB1, we
    release the SKB3 page as well:

    tcp_eat_recv_skb(SKB1)
      skb_release_data(SKB1)
        page_pool_return_skb_page(PAGE1)
        page_pool_return_skb_page(PAGE2)        // drops second pp_frag_count

(5) PAGE2 is freed, but the third RX descriptor was still using it!
    In our case this causes IOMMU faults, but it would silently corrupt
    memory if the IOMMU was disabled.

Change the logic that checks whether pp_recycle SKBs can be coalesced.
We still reject differing pp_recycle between 'from' and 'to' SKBs, but
in order to avoid the situation described above, we also reject
coalescing when both 'from' and 'to' are pp_recycled and 'from' is
cloned.

The new logic allows coalescing a cloned pp_recycle SKB into a page
refcounted one, because in this case the release (4) will drop the right
reference, the one taken by skb_try_coalesce().

Fixes: 53e0961da1c7 ("page_pool: add frag page recycling support in page pool")
Suggested-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vrf: fix packet sniffing for traffic originating from ip tunnels

[ Upstream commit 012d69fbfcc739f846766c1da56ef8b493b803b5 ]

in commit 048939088220
("vrf: add mac header for tunneled packets when sniffer is attached")
an Ethernet header was cooked for traffic originating from tunnel devices.

However, the header is added based on whether the mac_header is unset
and ignores cases where the device doesn't expose a mac header to upper
layers, such as in ip tunnels like ipip and gre.

Traffic originating from such devices still appears garbled when capturing
on the vrf device.

Fix by observing whether the original device exposes a header to upper
layers, similar to the logic done in af_packet.

In addition, skb->mac_len needs to be adjusted after adding the Ethernet
header for the skb_push/pull() surrounding dev_queue_xmit_nit() to work
on these packets.

Fixes: 048939088220 ("vrf: add mac header for tunneled packets when sniffer is attached")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/tls: fix slab-out-of-bounds bug in decrypt_internal

[ Upstream commit 9381fe8c849cfbe50245ac01fc077554f6eaa0e2 ]

The memory size of tls_ctx->rx.iv for AES128-CCM is 12 setting in
tls_set_sw_offload(). The return value of crypto_aead_ivsize()
for "ccm(aes)" is 16. So memcpy() require 16 bytes from 12 bytes
memory space will trigger slab-out-of-bounds bug as following:

==================================================================
BUG: KASAN: slab-out-of-bounds in decrypt_internal+0x385/0xc40 [tls]
Read of size 16 at addr ffff888114e84e60 by task tls/10911

Call Trace:
 <TASK>
 dump_stack_lvl+0x34/0x44
 print_report.cold+0x5e/0x5db
 ? decrypt_internal+0x385/0xc40 [tls]
 kasan_report+0xab/0x120
 ? decrypt_internal+0x385/0xc40 [tls]
 kasan_check_range+0xf9/0x1e0
 memcpy+0x20/0x60
 decrypt_internal+0x385/0xc40 [tls]
 ? tls_get_rec+0x2e0/0x2e0 [tls]
 ? process_rx_list+0x1a5/0x420 [tls]
 ? tls_setup_from_iter.constprop.0+0x2e0/0x2e0 [tls]
 decrypt_skb_update+0x9d/0x400 [tls]
 tls_sw_recvmsg+0x3c8/0xb50 [tls]

Allocated by task 10911:
 kasan_save_stack+0x1e/0x40
 __kasan_kmalloc+0x81/0xa0
 tls_set_sw_offload+0x2eb/0xa20 [tls]
 tls_setsockopt+0x68c/0x700 [tls]
 __sys_setsockopt+0xfe/0x1b0

Replace the crypto_aead_ivsize() with prot->iv_size + prot->salt_size
when memcpy() iv value in TLS_1_3_VERSION scenario.

Fixes: f295b3ae9f59 ("net/tls: Add support of AES128-CCM based ciphers")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sfc: add missing xdp queue reinitialization

[ Upstream commit 059a47f1da93811d37533556d67e72f2261b1127 ]

After rx/tx ring buffer size is changed, kernel panic occurs when
it acts XDP_TX or XDP_REDIRECT.

When tx/rx ring buffer size is changed(ethtool -G), sfc driver
reallocates and reinitializes rx and tx queues and their buffer
(tx_queue->buffer).
But it misses reinitializing xdp queues(efx->xdp_tx_queues).
So, while it is acting XDP_TX or XDP_REDIRECT, it uses the uninitialized
tx_queue->buffer.

A new function efx_set_xdp_channels() is separated from efx_set_channels()
to handle only xdp queues.

Splat looks like:
   BUG: kernel NULL pointer dereference, address: 000000000000002a
   #PF: supervisor write access in kernel mode
   #PF: error_code(0x0002) - not-present page
   PGD 0 P4D 0
   Oops: 0002 [#4] PREEMPT SMP NOPTI
   RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc]
   CPU: 2 PID: 0 Comm: swapper/2 Tainted: G      D           5.17.0+ #55 e8beeee8289528f11357029357cf
   Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80
   RSP: 0018:ffff92f121e45c60 EFLAGS: 00010297
   RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc]
   RAX: 0000000000000040 RBX: ffff92ea506895c0 RCX: ffffffffc0330870
   RDX: 0000000000000001 RSI: 00000001139b10ce RDI: ffff92ea506895c0
   RBP: ffffffffc0358a80 R08: 00000001139b110d R09: 0000000000000000
   R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040
   R13: 0000000000000018 R14: 00000001139b10ce R15: ffff92ea506895c0
   FS:  0000000000000000(0000) GS:ffff92f121ec0000(0000) knlGS:0000000000000000
   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80
   CR2: 000000000000002a CR3: 00000003e6810004 CR4: 00000000007706e0
   RSP: 0018:ffff92f121e85c60 EFLAGS: 00010297
   PKRU: 55555554
   RAX: 0000000000000040 RBX: ffff92ea50689700 RCX: ffffffffc0330870
   RDX: 0000000000000001 RSI: 00000001145a90ce RDI: ffff92ea50689700
   RBP: ffffffffc0358a80 R08: 00000001145a910d R09: 0000000000000000
   R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040
   R13: 0000000000000018 R14: 00000001145a90ce R15: ffff92ea50689700
   FS:  0000000000000000(0000) GS:ffff92f121e80000(0000) knlGS:0000000000000000
   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   CR2: 000000000000002a CR3: 00000003e6810005 CR4: 00000000007706e0
   PKRU: 55555554
   Call Trace:
    <IRQ>
    efx_xdp_tx_buffers+0x12b/0x3d0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]
    __efx_rx_packet+0x5c3/0x930 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]
    efx_rx_packet+0x28c/0x2e0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]
    efx_ef10_ev_process+0x5f8/0xf40 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]
    ? enqueue_task_fair+0x95/0x550
    efx_poll+0xc4/0x360 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]

Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa: mlx5: prevent cvq work from hogging CPU

[ Upstream commit 55ebf0d60e3cc6c9e8593399e185842c00e12f36 ]

A userspace triggerable infinite loop could happen in
mlx5_cvq_kick_handler() if userspace keeps sending a huge amount of
cvq requests.

Fixing this by introducing a quota and re-queue the work if we're out
of the budget (currently the implicit budget is one) . While at it,
using a per device work struct to avoid on demand memory allocation
for cvq.

Fixes: 5262912ef3cfc ("vdpa/mlx5: Add support for control VQ and MAC setting")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220329042109.4029-1-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa/mlx5: Propagate link status from device to vdpa driver

[ Upstream commit edf747affc41a18ccc3a616813d4c2b6d38b46ce ]

Add code to register to hardware asynchronous events. Use this
mechanism to track link status events coming from the device and update
the config struct.

After doing link status change, call the vdpa callback to notify of the
link status change.

Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909123635.30884-4-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa/mlx5: Rename control VQ workqueue to vdpa wq

[ Upstream commit 218bdd20e56cab41a68481bc10c551ae3e0a24fb ]

A subesequent patch will use the same workqueue for executing other
work not related to control VQ. Rename the workqueue and the work queue
entry used to convey information to the workqueue.

Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909123635.30884-3-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()

[ Upstream commit 16ed828b872d12ccba8f07bcc446ae89ba662f9c ]

The error handling path of the probe releases a resource that is not freed
in the remove function. In some cases, a ioremap() must be undone.

Add the missing iounmap() call in the remove function.

Link: https://lore.kernel.org/r/247066a3104d25f9a05de8b3270fc3c848763bcc.1647673264.git.christophe.jaillet@wanadoo.fr
Fixes: 45804fbb00ee ("[SCSI] 53c700: Amiga Zorro NCR53c710 SCSI")
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>