usb: dwc3: gadget: Disable gadget IRQ during pullup disable

commit 8212937305f84ef73ea81036dafb80c557583d4b upstream.

Current sequence utilizes dwc3_gadget_disable_irq() alongside
synchronize_irq() to ensure that no further DWC3 events are generated.
However, the dwc3_gadget_disable_irq() API only disables device
specific events.  Endpoint events can still be generated.  Briefly
disable the interrupt line, so that the cleanup code can run to
prevent device and endpoint events. (i.e. __dwc3_gadget_stop() and
dwc3_stop_active_transfers() respectively)

Without doing so, it can lead to both the interrupt handler and the
pullup disable routine both writing to the GEVNTCOUNT register, which
will cause an incorrect count being read from future interrupts.

Fixes: ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the controller")
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1621571037-1424-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: usb: Fix misuse of IS_ENABLED

commit 7c2fc79250cafa1a29befeb60163028ec4720814 upstream.

While IS_ENABLED() is perfectly fine for CONFIG_* symbols, it is not
for other symbols such as __BIG_ENDIAN that is provided directly by
the compiler.

Switch to use CONFIG_CPU_BIG_ENDIAN instead of __BIG_ENDIAN.

Signed-off-by: Chen Li <chenli@uniontech.com>
Reviewed-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 94583a41047e ("phy: usb: Restructure in preparation for adding 7216 USB support")
Link: https://lore.kernel.org/r/87czuggpra.wl-chenli@uniontech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacks

commit 86ab21cc39e6b99b7065ab9008c90bec5dec535a upstream.

Current code does not set .curr_table and .n_linear_ranges settings,
so it cannot use the regulator_get/set_current_limit_regmap helpers.
If we setup the curr_table, it will has 200 entries.
Implement customized .set_current_limit/.get_current_limit callbacks
instead.

Fixes: b8c054a5eaf0 ("regulator: rtmv20: Adds support for Richtek RTMV20 load switch regulator")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20210530124101.477727-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: bd71828: Fix .n_voltages settings

commit 4c668630bf8ea90a041fc69c9984486e0f56682d upstream.

Current .n_voltages settings do not cover the latest 2 valid selectors,
so it fails to set voltage for the hightest voltage support.
The latest linear range has step_uV = 0, so it does not matter if we
count the .n_voltages to maximum selector + 1 or the first selector of
latest linear range + 1.
To simplify calculating the n_voltages, let's just set the
.n_voltages to maximum selector + 1.

Fixes: 522498f8cb8c ("regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210523071045.2168904-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: fan53880: Fix missing n_voltages setting

commit 34991ee96fd8477479dd15adadceb6b28b30d9b0 upstream.

Fixes: e6dea51e2d41 ("regulator: fan53880: Add initial support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Christoph Fritz <chf.fritz@googlemail.com>
Link: https://lore.kernel.org/r/20210517105325.1227393-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: bd718x7: Fix the BUCK7 voltage setting on BD71837

commit bc537e65b09a05923f98a31920d1ab170e648dba upstream.

Changing the BD71837 voltages for other regulators except the first 4 BUCKs
should be forbidden when the regulator is enabled. There may be out-of-spec
voltage spikes if the voltage of these "non DVS" bucks is changed when
enabled. This restriction was accidentally removed when the LDO voltage
change was allowed for BD71847. (It was not noticed that the BD71837
BUCK7 used same voltage setting function as LDOs).

Additionally this bug causes incorrect voltage monitoring register access.
The voltage change function accidentally used for bd71837 BUCK7 is
intended to only handle LDO voltage changes. A BD71847 LDO specific
voltage monitoring disabling code gets executed on BD71837 and register
offsets are wrongly calculated as regulator is assumed to be an LDO.

Prevent the BD71837 BUCK7 voltage change when BUCK7 is enabled by using
the correct voltage setting operation.

Fixes: 9bcbabafa19b ("regulator: bd718x7: remove voltage change restriction from BD71847 LDOs")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/bd8c00931421fafa57e3fdf46557a83075b7cc17.1622610103.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: max77620: Use device_set_of_node_from_dev()

commit 6f55c5dd1118b3076d11d9cb17f5c5f4bc3a1162 upstream.

The MAX77620 driver fails to re-probe on deferred probe because driver
core tries to claim resources that are already claimed by the PINCTRL
device. Use device_set_of_node_from_dev() helper which marks OF node as
reused, skipping erroneous execution of pinctrl_bind_pins() for the PMIC
device on the re-probe.

Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210523224243.13219-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: core: resolve supply for boot-on/always-on regulators

commit 98e48cd9283dbac0e1445ee780889f10b3d1db6a upstream.

For the boot-on/always-on regulators the set_machine_constrainst() is
called before resolving rdev->supply. Thus the code would try to enable
rdev before enabling supplying regulator. Enforce resolving supply
regulator before enabling rdev.

Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210519221224.2868496-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: cancel frs hrtimer when unregister tcpm port

commit 7ade4805e296c8d1e40c842395bbe478c7210555 upstream.

Like the state_machine_timer, we should also cancel possible pending
frs hrtimer when unregister tcpm port.

Fixes: 8dc4bd073663 ("usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1622627829-11070-2-git-send-email-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm port

commit 3a13ff7ef4349d70d1d18378d661117dd5af8efe upstream.

A pending hrtimer may expire after the kthread_worker of tcpm port
is destroyed, see below kernel dump when do module unload, fix it
by cancel the 2 hrtimers.

[  111.517018] Unable to handle kernel paging request at virtual address ffff8000118cb880
[  111.518786] blk_update_request: I/O error, dev sda, sector 60061185 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  111.526594] Mem abort info:
[  111.526597]   ESR = 0x96000047
[  111.526600]   EC = 0x25: DABT (current EL), IL = 32 bits
[  111.526604]   SET = 0, FnV = 0
[  111.526607]   EA = 0, S1PTW = 0
[  111.526610] Data abort info:
[  111.526612]   ISV = 0, ISS = 0x00000047
[  111.526615]   CM = 0, WnR = 1
[  111.526619] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041d75000
[  111.526623] [ffff8000118cb880] pgd=10000001bffff003, p4d=10000001bffff003, pud=10000001bfffe003, pmd=10000001bfffa003, pte=0000000000000000
[  111.526642] Internal error: Oops: 96000047 [#1] PREEMPT SMP
[  111.526647] Modules linked in: dwc3_imx8mp dwc3 phy_fsl_imx8mq_usb [last unloaded: tcpci]
[  111.526663] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc4-00927-gebbe9dbd802c-dirty #36
[  111.526670] Hardware name: NXP i.MX8MPlus EVK board (DT)
[  111.526674] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO BTYPE=--)
[  111.526681] pc : queued_spin_lock_slowpath+0x1a0/0x390
[  111.526695] lr : _raw_spin_lock_irqsave+0x88/0xb4
[  111.526703] sp : ffff800010003e20
[  111.526706] x29: ffff800010003e20 x28: ffff00017f380180
[  111.537156] buffer_io_error: 6 callbacks suppressed
[  111.537162] Buffer I/O error on dev sda1, logical block 60040704, async page read
[  111.539932]  x27: ffff00017f3801c0
[  111.539938] x26: ffff800010ba2490 x25: 0000000000000000 x24: 0000000000000001
[  111.543025] blk_update_request: I/O error, dev sda, sector 60061186 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0
[  111.548304]
[  111.548306] x23: 00000000000000c0 x22: ffff0000c2a9f184 x21: ffff00017f380180
[  111.551374] Buffer I/O error on dev sda1, logical block 60040705, async page read
[  111.554499]
[  111.554503] x20: ffff0000c5f14210 x19: 00000000000000c0 x18: 0000000000000000
[  111.557391] Buffer I/O error on dev sda1, logical block 60040706, async page read
[  111.561218]
[  111.561222] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[  111.564205] Buffer I/O error on dev sda1, logical block 60040707, async page read
[  111.570887] x14: 00000000000000f5 x13: 0000000000000001 x12: 0000000000000040
[  111.570902] x11: ffff0000c05ac6d8
[  111.583420] Buffer I/O error on dev sda1, logical block 60040708, async page read
[  111.588978]  x10: 0000000000000000 x9 : 0000000000040000
[  111.588988] x8 : 0000000000000000
[  111.597173] Buffer I/O error on dev sda1, logical block 60040709, async page read
[  111.605766]  x7 : ffff00017f384880 x6 : ffff8000118cb880
[  111.605777] x5 : ffff00017f384880
[  111.611094] Buffer I/O error on dev sda1, logical block 60040710, async page read
[  111.617086]  x4 : 0000000000000000 x3 : ffff0000c2a9f184
[  111.617096] x2 : ffff8000118cb880
[  111.622242] Buffer I/O error on dev sda1, logical block 60040711, async page read
[  111.626927]  x1 : ffff8000118cb880 x0 : ffff00017f384888
[  111.626938] Call trace:
[  111.626942]  queued_spin_lock_slowpath+0x1a0/0x390
[  111.795809]  kthread_queue_work+0x30/0xc0
[  111.799828]  state_machine_timer_handler+0x20/0x30
[  111.804624]  __hrtimer_run_queues+0x140/0x1e0
[  111.808990]  hrtimer_interrupt+0xec/0x2c0
[  111.813004]  arch_timer_handler_phys+0x38/0x50
[  111.817456]  handle_percpu_devid_irq+0x88/0x150
[  111.821991]  __handle_domain_irq+0x80/0xe0
[  111.826093]  gic_handle_irq+0xc0/0x140
[  111.829848]  el1_irq+0xbc/0x154
[  111.832991]  arch_cpu_idle+0x1c/0x2c
[  111.836572]  default_idle_call+0x24/0x6c
[  111.840497]  do_idle+0x238/0x2ac
[  111.843729]  cpu_startup_entry+0x2c/0x70
[  111.847657]  rest_init+0xdc/0xec
[  111.850890]  arch_call_rest_init+0x14/0x20
[  111.854988]  start_kernel+0x508/0x540
[  111.858659] Code: 910020e0 8b0200c2 f861d884 aa0203e1 (f8246827)
[  111.864760] ---[ end trace 308b9a4a3dcb73ac ]---
[  111.869381] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[  111.876258] SMP: stopping secondary CPUs
[  111.880185] Kernel Offset: disabled
[  111.883673] CPU features: 0x00001001,20000846
[  111.888031] Memory Limit: none
[  111.891090] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---

Fixes: 3ed8e1c2ac99 ("usb: typec: tcpm: Migrate workqueue to RT priority for processing events")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1622627829-11070-1-git-send-email-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: fix various gadget panics on 10gbps cabling

commit 032e288097a553db5653af552dd8035cd2a0ba96 upstream.

usb_assign_descriptors() is called with 5 parameters,
the last 4 of which are the usb_descriptor_header for:
  full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps),
  high-speed (USB2.0 - 480Mbps),
  super-speed (USB3.0 - 5Gbps),
  super-speed-plus (USB3.1 - 10Gbps).

The differences between full/high/super-speed descriptors are usually
substantial (due to changes in the maximum usb block size from 64 to 512
to 1024 bytes and other differences in the specs), while the difference
between 5 and 10Gbps descriptors may be as little as nothing
(in many cases the same tuning is simply good enough).

However if a gadget driver calls usb_assign_descriptors() with
a NULL descriptor for super-speed-plus and is then used on a max 10gbps
configuration, the kernel will crash with a null pointer dereference,
when a 10gbps capable device port + cable + host port combination shows up.
(This wouldn't happen if the gadget max-speed was set to 5gbps, but
it of course defaults to the maximum, and there's no real reason to
artificially limit it)

The fix is to simply use the 5gbps descriptor as the 10gbps descriptor,
if a 10gbps descriptor wasn't provided.

Obviously this won't fix the problem if the 5gbps descriptor is also
NULL, but such cases can't be so trivially solved (and any such gadgets
are unlikely to be used with USB3 ports any way).

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210609024459.1126080-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: fix various gadgets null ptr deref on 10gbps cabling.

commit 90c4d05780d47e14a50e11a7f17373104cd47d25 upstream.

This avoids a null pointer dereference in
f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm}
by simply reusing the 5gbps config for 10gbps.

Fixes: eaef50c76057 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus")
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Michael R Sweet <msweet@msweet.org>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Cc: Wei Ming Chen <jj251510319013@gmail.com>
Cc: Will McVicker <willmcvicker@google.com>
Cc: Zqiang <qiang.zhang@windriver.com>
Reviewed-By: Lorenzo Colitti <lorenzo@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608044141.3898496-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: eem: fix wrong eem header operation

commit 305f670846a31a261462577dd0b967c4fa796871 upstream.

when skb_clone() or skb_copy_expand() fail,
it should pull skb with lengh indicated by header,
or not it will read network data and check it as header.

Cc: <stable@vger.kernel.org>
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com>
Link: https://lore.kernel.org/r/20210608233547.3767-1-linyyuan@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: fix alternate function for CP2102N QFN20

commit 6f7ec77cc8b64ff5037c1945e4650c65c458037d upstream.

The QFN20 part has a different GPIO/port function assignment. The
configuration struct bit field ordered as TX/RX/RS485/WAKEUP/CLK
which exactly matches GPIO0-3 for QFN24/28. However, QFN20 has a
different GPIO to primary function assignment.

Special case QFN20 to follow to properly detect which GPIOs are
available.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://lore.kernel.org/r/51830b2b24118eb0f77c5c9ac64ffb2f519dbb1d.1622218300.git.stefan@agner.ch
Fixes: c8acfe0aadbe ("USB: serial: cp210x: implement GPIO support for CP2102N")
Cc: stable@vger.kernel.org # 4.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: quatech2: fix control-request directions

commit eb8dbe80326c3d44c1e38ee4f40e0d8d3e06f2d0 upstream.

The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.

Fix the three requests which erroneously used usb_rcvctrlpipe().

Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Cc: stable@vger.kernel.org # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: omninet: add device id for Zyxel Omni 56K Plus

commit fc0b3dc9a11771c3919eaaaf9d649138b095aa0f upstream.

Add device id for Zyxel Omni 56K Plus modem, this modem include:

USB chip:
NetChip
NET2888

Main chip:
901041A
F721501APGF

Another modem using the same chips is the Zyxel Omni 56K DUO/NEO,
could be added with the right USB ID.

Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: add NovaTech OrionMX product ID

commit bc96c72df33ee81b24d87eab953c73f7bcc04f29 upstream.

Add PID for the NovaTech OrionMX so it can be automatically detected.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: Ensure io_completion_wq is idle during unbind

commit 6fc1db5e6211e30fbb1cee8d7925d79d4ed2ae14 upstream.

During unbind, ffs_func_eps_disable() will be executed, resulting in
completion callbacks for any pending USB requests.  When using AIO,
irrespective of the completion status, io_data work is queued to
io_completion_wq to evaluate and handle the completed requests.  Since
work runs asynchronously to the unbind() routine, there can be a
scenario where the work runs after the USB gadget has been fully
removed, resulting in accessing of a resource which has been already
freed. (i.e. usb_ep_free_request() accessing the USB ep structure)

Explicitly drain the io_completion_wq, instead of relying on the
destroy_workqueue() (in ffs_data_put()) to make sure no pending
completion work items are running.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1621644261-1236-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()

commit 843fabdd7623271330af07f1b7fbd7fabe33c8de upstream.

devm_ioremap_resource() can return an error, add missed check for it.

Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210607205007.71458-2-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe()

commit 1a85b350a7741776a406005b943e3dec02c424ed upstream.

device_get_next_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.

Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210607205007.71458-1-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path

commit f247f0a82a4f8c3bfed178d8fd9e069d1424ee4e upstream.

If ucsi_init() fails for some reason (e.g. ucsi_register_port()
fails or general communication failure to the PPM), particularly at
any point after the GET_CAPABILITY command had been issued, this
results in unwinding the initialization and returning an error.
However the ucsi structure's ucsi_capability member retains its
current value, including likely a non-zero num_connectors.
And because ucsi_init() itself is done in a workqueue a UCSI
interface driver will be unaware that it failed and may think the
ucsi_register() call was completely successful.  Later, if
ucsi_unregister() is called, due to this stale ucsi->cap value it
would try to access the items in the ucsi->connector array which
might not be in a proper state or not even allocated at all and
results in NULL or invalid pointer dereference.

Fix this by clearing the ucsi->cap value to 0 during the error
path of ucsi_init() in order to prevent a later ucsi_unregister()
from entering the connector cleanup loop.

Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210609073535.5094-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: wcove: Use LE to CPU conversion when accessing msg->header

commit d5ab95da2a41567440097c277c5771ad13928dad upstream.

As LKP noticed the Sparse is not happy about strict type handling:
   .../typec/tcpm/wcove.c:380:50: sparse:     expected unsigned short [usertype] header
   .../typec/tcpm/wcove.c:380:50: sparse:     got restricted __le16 const [usertype] header

Fix this by switching to use pd_header_cnt_le() instead of pd_header_cnt()
in the affected code.

Fixes: ae8a2ca8a221 ("usb: typec: Group all TCPCI/TCPM code together")
Fixes: 3c4fb9f16921 ("usb: typec: wcove: start using tcpm for USB PD support")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210609172202.83377-1-andriy.shevchenko@linux.intel.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: fix MUSB_QUIRK_B_DISCONNECT_99 handling

commit b65ba0c362be665192381cc59e3ac3ef6f0dd1e1 upstream.

In commit 92af4fc6ec33 ("usb: musb: Fix suspend with devices
connected for a64"), the logic to support the
MUSB_QUIRK_B_DISCONNECT_99 quirk was modified to only conditionally
schedule the musb->irq_work delayed work.

This commit badly breaks ECM Gadget on AM335X. Indeed, with this
commit, one can observe massive packet loss:

$ ping 192.168.0.100
...
15 packets transmitted, 3 received, 80% packet loss, time 14316ms

Reverting this commit brings back a properly functioning ECM
Gadget. An analysis of the commit seems to indicate that a mistake was
made: the previous code was not falling through into the
MUSB_QUIRK_B_INVALID_VBUS_91, but now it is, unless the condition is
taken.

Changing the logic to be as it was before the problematic commit *and*
only conditionally scheduling musb->irq_work resolves the regression:

$ ping 192.168.0.100
...
64 packets transmitted, 64 received, 0% packet loss, time 64475ms

Fixes: 92af4fc6ec33 ("usb: musb: Fix suspend with devices connected for a64")
Cc: stable@vger.kernel.org
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link: https://lore.kernel.org/r/20210528140446.278076-1-thomas.petazzoni@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: ep0: fix NULL pointer exception

commit d00889080ab60051627dab1d85831cd9db750e2a upstream.

There is no validation of the index from dwc3_wIndex_to_dep() and we might
be referring a non-existing ep and trigger a NULL pointer exception. In
certain configurations we might use fewer eps and the index might wrongly
indicate a larger ep index than existing.

By adding this validation from the patch we can actually report a wrong
index back to the caller.

In our usecase we are using a composite device on an older kernel, but
upstream might use this fix also. Unfortunately, I cannot describe the
hardware for others to reproduce the issue as it is a proprietary
implementation.

[   82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4
[   82.966891] Mem abort info:
[   82.969663]   ESR = 0x96000006
[   82.972703]   Exception class = DABT (current EL), IL = 32 bits
[   82.978603]   SET = 0, FnV = 0
[   82.981642]   EA = 0, S1PTW = 0
[   82.984765] Data abort info:
[   82.987631]   ISV = 0, ISS = 0x00000006
[   82.991449]   CM = 0, WnR = 0
[   82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc
[   83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000
[   83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[   83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c)
[   83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1
[   83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO)
[   83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c
[   83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94

...

[   83.141788] Call trace:
[   83.144227]  dwc3_ep0_handle_feature+0x414/0x43c
[   83.148823]  dwc3_ep0_interrupt+0x3b4/0xc94
[   83.181546] ---[ end trace aac6b5267d84c32f ]---

Signed-off-by: Marian-Cristian Rotariu <marian.c.rotariu@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608162650.58426-1-marian.c.rotariu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULL

commit 03715ea2e3dbbc56947137ce3b4ac18a726b2f87 upstream.

There exists a possible scenario in which dwc3_gadget_init() can fail:
during during host -> peripheral mode switch in dwc3_set_mode(), and
a pending gadget driver fails to bind.  Then, if the DRD undergoes
another mode switch from peripheral->host the resulting
dwc3_gadget_exit() will attempt to reference an invalid and dangling
dwc->gadget pointer as well as call dma_free_coherent() on unmapped
DMA pointers.

The exact scenario can be reproduced as follows:
 - Start DWC3 in peripheral mode
 - Configure ConfigFS gadget with FunctionFS instance (or use g_ffs)
 - Run FunctionFS userspace application (open EPs, write descriptors, etc)
 - Bind gadget driver to DWC3's UDC
 - Switch DWC3 to host mode
   => dwc3_gadget_exit() is called. usb_del_gadget() will put the
ConfigFS driver instance on the gadget_driver_pending_list
 - Stop FunctionFS application (closes the ep files)
 - Switch DWC3 to peripheral mode
   => dwc3_gadget_init() fails as usb_add_gadget() calls
check_pending_gadget_drivers() and attempts to rebind the UDC
to the ConfigFS gadget but fails with -19 (-ENODEV) because the
FFS instance is not in FFS_ACTIVE state (userspace has not
re-opened and written the descriptors yet, i.e. desc_ready!=0).
 - Switch DWC3 back to host mode
   => dwc3_gadget_exit() is called again, but this time dwc->gadget
is invalid.

Although it can be argued that userspace should take responsibility
for ensuring that the FunctionFS application be ready prior to
allowing the composite driver bind to the UDC, failure to do so
should not result in a panic from the kernel driver.

Fix this by setting dwc->gadget to NULL in the failure path of
dwc3_gadget_init() and add a check to dwc3_gadget_exit() to bail out
unless the gadget pointer is valid.

Fixes: e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically")
Cc: <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210528160405.17550-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: meson-g12a: Disable the regulator in the error handling path of the probe

commit 1d0d3d818eafe1963ec1eaf302175cd14938188e upstream.

If an error occurs after a successful 'regulator_enable()' call,
'regulator_disable()' must be called.

Fix the error handling path of the probe accordingly.

The remove function doesn't need to be fixed, because the
'regulator_disable()' call is already hidden in 'dwc3_meson_g12a_suspend()'
which is called via 'pm_runtime_set_suspended()' in the remove function.

Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/79df054046224bbb0716a8c5c2082650290eec86.1621616013.git.christophe.jaillet@wanadoo.fr
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled

commit 4d2aa178d2ad2fb156711113790dde13e9aa2376 upstream.

When only PHY1 is used (for example on Odroid-HC4), the regmap init code
uses the usb2 ports when doesn't initialize the PHY1 regmap entry.

This fixes:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
pc : regmap_update_bits_base+0x40/0xa0
lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8
...
Call trace:
regmap_update_bits_base+0x40/0xa0
dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8
dwc3_meson_g12a_usb2_init+0x7c/0xc8
dwc3_meson_g12a_usb_init+0x28/0x48
dwc3_meson_g12a_probe+0x298/0x540
platform_probe+0x70/0xe0
really_probe+0xf0/0x4d8
driver_probe_device+0xfc/0x168
...

Fixes: 013af227f58a97 ("usb: dwc3: meson-g12a: handle the phy and glue registers separately")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210601084830.260196-1-narmstrong@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: pd: Set PD_T_SINK_WAIT_CAP to 310ms

commit 6490fa565534fa83593278267785a694fd378a2b upstream.

Current timer PD_T_SINK_WAIT_CAP is set to 240ms which will violate the
SinkWaitCapTimer (tTypeCSinkWaitCap 310 - 620 ms) defined in the PD
Spec if the port is faster enough when running the state machine. Set it
to the lower bound 310ms to ensure the timeout is in Spec.

Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210528081613.730661-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: f_ncm: only first packet of aggregate needs to start timer

commit 1958ff5ad2d4908b44a72bcf564dfe67c981e7fe upstream.

The reasoning for this change is that if we already had
a packet pending, then we also already had a pending timer,
and as such there is no need to reschedule it.

This also prevents packets getting delayed 60 ms worst case
under a tiny packet every 290us transmit load, by keeping the
timeout always relative to the first queued up packet.
(300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms)

As such the first packet is now at most delayed by 300us.

Under low transmit load, this will simply result in us sending
a shorter aggregate, as originally intended.

This patch has the benefit of greatly reducing (by ~10 factor
with 1500 byte frames aggregated into 16 kiB) the number of
(potentially pretty costly) updates to the hrtimer.

Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608085438.813960-1-zenczykowski@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: f_ncm: ncm_bitrate (speed) is unsigned

commit 3370139745853f7826895293e8ac3aec1430508e upstream.

[  190.544755] configfs-gadget gadget: notify speed -44967296

This is because 4250000000 - 2**32 is -44967296.

Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added")
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
Cc: Linux USB Mailing List <linux-usb@vger.kernel.org>
Acked-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: renesas_sdhi: Fix HS400 on R-Car M3-W+

commit 6687cd72aa9112a454a4646986e0402dd1b07d0e upstream.

R-Car M3-W ES3.0 is marketed as R-Car M3-W+ (R8A77961), and has its own
compatible value "renesas,r8a77961".

Hence using soc_device_match() with soc_id = "r8a7796" and revision =
"ES3.*" does not actually match running on an R-Car M3-W+ SoC.

Fix this by matching with soc_id = "r8a77961" instead.

Fixes: a38c078fea0b1393 ("mmc: renesas_sdhi: Avoid bad TAP in HS400")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/ee8af5d631f5331139ffea714539030d97352e93.1622811525.git.geert+renesas@glider.be
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: renesas_sdhi: abort tuning when timeout detected

commit 2c9017d0b5d3fbf17e69577a42d9e610ca122810 upstream.

We have to bring the eMMC from sending-data state back to transfer state
once we detected a CRC error (timeout) during tuning. So, send a stop
command via mmc_abort_tuning().

Fixes: 4f11997773b6 ("mmc: tmio: Add tuning support")
Reported-by Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210602073435.5955-1-wsa+renesas@sang-engineering.com
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Do not blindly read the ip address in ftrace_bug()

commit 6c14133d2d3f768e0a35128faac8aa6ed4815051 upstream.

It was reported that a bug on arm64 caused a bad ip address to be used for
updating into a nop in ftrace_init(), but the error path (rightfully)
returned -EINVAL and not -EFAULT, as the bug caused more than one error to
occur. But because -EINVAL was returned, the ftrace_bug() tried to report
what was at the location of the ip address, and read it directly. This
caused the machine to panic, as the ip was not pointing to a valid memory
address.

Instead, read the ip address with copy_from_kernel_nofault() to safely
access the memory, and if it faults, report that the address faulted,
otherwise report what was in that location.

Link: https://lore.kernel.org/lkml/20210607032329.28671-1-mark-pk.tsai@mediatek.com/
Cc: stable@vger.kernel.org
Fixes: 05736a427f7e1 ("ftrace: warn on failure to disable mcount callers")
Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup1: don't allow '\n' in renaming

commit b7e24eb1caa5f8da20d405d262dba67943aedc42 upstream.

cgroup_mkdir() have restriction on newline usage in names:
$ mkdir $'/sys/fs/cgroup/cpu/test\ntest2'
mkdir: cannot create directory
'/sys/fs/cgroup/cpu/test\ntest2': Invalid argument

But in cgroup1_rename() such check is missed.
This allows us to make /proc/<pid>/cgroup unparsable:
$ mkdir /sys/fs/cgroup/cpu/test
$ mv /sys/fs/cgroup/cpu/test $'/sys/fs/cgroup/cpu/test\ntest2'
$ echo $$ > $'/sys/fs/cgroup/cpu/test\ntest2'
$ cat /proc/self/cgroup
11:pids:/
10:freezer:/
9:hugetlb:/
8:cpuset:/
7:blkio:/user.slice
6:memory:/user.slice
5:net_cls,net_prio:/
4:perf_event:/
3:devices:/user.slice
2:cpu,cpuacct:/test
test2
1:name=systemd:/
0::/

Signed-off-by: Alexander Kuznetsov <wwfq@yandex-team.ru>
Reported-by: Andrey Krasichkov <buglloc@yandex-team.ru>
Acked-by: Dmitry Yakunin <zeil@yandex-team.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: promote debugging asserts to full-fledged checks in validate_super

commit aefd7f7065567a4666f42c0fc8cdb379d2e036bf upstream.

Syzbot managed to trigger this assert while performing its fuzzing.
Turns out it's better to have those asserts turned into full-fledged
checks so that in case buggy btrfs images are mounted the users gets
an error and mounting is stopped. Alternatively with CONFIG_BTRFS_ASSERT
disabled such image would have been erroneously allowed to be mounted.

Reported-by: syzbot+a6bf271c02e4fe66b4e4@syzkaller.appspotmail.com
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add uuids to the messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: return value from btrfs_mark_extent_written() in case of error

commit e7b2ec3d3d4ebeb4cff7ae45cf430182fa6a49fb upstream.

We always return 0 even in case of an error in btrfs_mark_extent_written().
Fix it to return proper error value in case of a failure. All callers
handle it.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

async_xor: check src_offs is not NULL before updating it

commit 9be148e408df7d361ec5afd6299b7736ff3928b0 upstream.

When PAGE_SIZE is greater than 4kB, multiple stripes may share the same
page. Thus, src_offs is added to async_xor_offs() with array of offsets.
However, async_xor() passes NULL src_offs to async_xor_offs(). In such
case, src_offs should not be updated. Add a check before the update.

Fixes: ceaf2966ab08(async_xor: increase src_offs when dropping destination page)
Cc: stable@vger.kernel.org # v5.10+
Reported-by: Oleksandr Shchirskyi <oleksandr.shchirskyi@linux.intel.com>
Tested-by: Oleksandr Shchirskyi <oleksandr.shchirskyi@intel.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Fix uninitialized variables

commit 43c85d770db80cb135f576f8fde6ff1a08e707a4 upstream.

The sinfo.pertid and sinfo.generation variables are not initialized and
it causes a crash when we use this as a wireless access point.

[  456.873025] ------------[ cut here ]------------
[  456.878198] kernel BUG at mm/slub.c:3968!
[  456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM

  [ snip ]

[  457.271004] Backtrace:
[  457.273733] [<c02b7ee4>] (kfree) from [<c0e2a470>] (nl80211_send_station+0x954/0xfc4)
[  457.282481]  r9:eccca0c0 r8:e8edfec0 r7:00000000 r6:00000011 r5:e80a9480 r4:e8edfe00
[  457.291132] [<c0e29b1c>] (nl80211_send_station) from [<c0e2b18c>] (cfg80211_new_sta+0x90/0x1cc)
[  457.300850]  r10:e80a9480 r9:e8edfe00 r8:ea678cca r7:00000a20 r6:00000000 r5:ec46d000
[  457.309586]  r4:ec46d9e0
[  457.312433] [<c0e2b0fc>] (cfg80211_new_sta) from [<bf086684>] (rtw_cfg80211_indicate_sta_assoc+0x80/0x9c [r8723bs])
[  457.324095]  r10:00009930 r9:e85b9d80 r8:bf091050 r7:00000000 r6:00000000 r5:0000001c
[  457.332831]  r4:c1606788
[  457.335692] [<bf086604>] (rtw_cfg80211_indicate_sta_assoc [r8723bs]) from [<bf03df38>] (rtw_stassoc_event_callback+0x1c8/0x1d4 [r8723bs])
[  457.349489]  r7:ea678cc0 r6:000000a1 r5:f1225f84 r4:f086b000
[  457.355845] [<bf03dd70>] (rtw_stassoc_event_callback [r8723bs]) from [<bf048e4c>] (mlme_evt_hdl+0x8c/0xb4 [r8723bs])
[  457.367601]  r7:c1604900 r6:f086c4b8 r5:00000000 r4:f086c000
[  457.373959] [<bf048dc0>] (mlme_evt_hdl [r8723bs]) from [<bf03693c>] (rtw_cmd_thread+0x198/0x3d8 [r8723bs])
[  457.384744]  r5:f086e000 r4:f086c000
[  457.388754] [<bf0367a4>] (rtw_cmd_thread [r8723bs]) from [<c014a214>] (kthread+0x170/0x174)
[  457.398083]  r10:ed7a57e8 r9:bf0367a4 r8:f086b000 r7:e8ede000 r6:00000000 r5:e9975200
[  457.406828]  r4:e8369900
[  457.409653] [<c014a0a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[  457.417718] Exception stack(0xe8edffb0 to 0xe8edfff8)
[  457.423356] ffa0:                                     00000000 00000000 00000000 00000000
[  457.432492] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  457.441618] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  457.449006]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014a0a4
[  457.457750]  r4:e9975200
[  457.460574] Code: 1a000003 e5953004 e3130001 1a000000 (e7f001f2)
[  457.467381] ---[ end trace 4acbc8c15e9e6aa7 ]---

Link: https://forum.armbian.com/topic/14727-wifi-ap-kernel-bug-in-kernel-5444/
Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info")
Fixes: f5ea9120be2e ("nl80211: add generation number to all dumps")
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608064620.74059-1-wlooi@ucalgary.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: avoid speculation-based attacks from out-of-range memslot accesses

commit da27a83fd6cc7780fea190e1f5c19e87019da65c upstream.

KVM's mechanism for accessing guest memory translates a guest physical
address (gpa) to a host virtual address using the right-shifted gpa
(also known as gfn) and a struct kvm_memory_slot.  The translation is
performed in __gfn_to_hva_memslot using the following formula:

      hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE

It is expected that gfn falls within the boundaries of the guest's
physical memory.  However, a guest can access invalid physical addresses
in such a way that the gfn is invalid.

__gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first
retrieves a memslot through __gfn_to_memslot.  While __gfn_to_memslot
does check that the gfn falls within the boundaries of the guest's
physical memory or not, a CPU can speculate the result of the check and
continue execution speculatively using an illegal gfn. The speculation
can result in calculating an out-of-bounds hva.  If the resulting host
virtual address is used to load another guest physical address, this
is effectively a Spectre gadget consisting of two consecutive reads,
the second of which is data dependent on the first.

Right now it's not clear if there are any cases in which this is
exploitable.  One interesting case was reported by the original author
of this patch, and involves visiting guest page tables on x86.  Right
now these are not vulnerable because the hva read goes through get_user(),
which contains an LFENCE speculation barrier.  However, there are
patches in progress for x86 uaccess.h to mask kernel addresses instead of
using LFENCE; once these land, a guest could use speculation to read
from the VMM's ring 3 address space.  Other architectures such as ARM
already use the address masking method, and would be susceptible to
this same kind of data-dependent access gadgets.  Therefore, this patch
proactively protects from these attacks by masking out-of-bounds gfns
in __gfn_to_hva_memslot, which blocks speculation of invalid hvas.

Sean Christopherson noted that this patch does not cover
kvm_read_guest_offset_cached.  This however is limited to a few bytes
past the end of the cache, and therefore it is unlikely to be useful in
the context of building a chain of data dependent accesses.

Reported-by: Artemiy Margaritov <artemiy.margaritov@gmail.com>
Co-developed-by: Artemiy Margaritov <artemiy.margaritov@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: X86: MMU: Use the correct inherited permissions to get shadow page

commit b1bd5cba3306691c771d558e94baa73e8b0b96b7 upstream.

When computing the access permissions of a shadow page, use the effective
permissions of the walk up to that point, i.e. the logic AND of its parents'
permissions.  Two guest PxE entries that point at the same table gfn need to
be shadowed with different shadow pages if their parents' permissions are
different.  KVM currently uses the effective permissions of the last
non-leaf entry for all non-leaf entries.  Because all non-leaf SPTEs have
full ("uwx") permissions, and the effective permissions are recorded only
in role.access and merged into the leaves, this can lead to incorrect
reuse of a shadow page and eventually to a missing guest protection page
fault.

For example, here is a shared pagetable:

   pgd[]   pud[]        pmd[]            virtual address pointers
                     /->pmd1(u--)->pte1(uw-)->page1 <- ptr1 (u--)
        /->pud1(uw-)--->pmd2(uw-)->pte2(uw-)->page2 <- ptr2 (uw-)
   pgd-|           (shared pmd[] as above)
        \->pud2(u--)--->pmd1(u--)->pte1(uw-)->page1 <- ptr3 (u--)
                     \->pmd2(uw-)->pte2(uw-)->page2 <- ptr4 (u--)

  pud1 and pud2 point to the same pmd table, so:
  - ptr1 and ptr3 points to the same page.
  - ptr2 and ptr4 points to the same page.

(pud1 and pud2 here are pud entries, while pmd1 and pmd2 here are pmd entries)

- First, the guest reads from ptr1 first and KVM prepares a shadow
  page table with role.access=u--, from ptr1's pud1 and ptr1's pmd1.
  "u--" comes from the effective permissions of pgd, pud1 and
  pmd1, which are stored in pt->access.  "u--" is used also to get
  the pagetable for pud1, instead of "uw-".

- Then the guest writes to ptr2 and KVM reuses pud1 which is present.
  The hypervisor set up a shadow page for ptr2 with pt->access is "uw-"
  even though the pud1 pmd (because of the incorrect argument to
  kvm_mmu_get_page in the previous step) has role.access="u--".

- Then the guest reads from ptr3.  The hypervisor reuses pud1's
  shadow pmd for pud2, because both use "u--" for their permissions.
  Thus, the shadow pmd already includes entries for both pmd1 and pmd2.

- At last, the guest writes to ptr4.  This causes no vmexit or pagefault,
  because pud1's shadow page structures included an "uw-" page even though
  its role.access was "u--".

Any kind of shared pagetable might have the similar problem when in
virtual machine without TDP enabled if the permissions are different
from different ancestors.

In order to fix the problem, we change pt->access to be an array, and
any access in it will not include permissions ANDed from child ptes.

The test code is: https://lore.kernel.org/kvm/20210603050537.19605-1-jiangshanlai@gmail.com/
Remember to test it with TDP disabled.

The problem had existed long before the commit 41074d07c78b ("KVM: MMU:
Fix inherited permissions for emulated guest pte updates"), and it
is hard to find which is the culprit.  So there is no fixes tag here.

Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20210603052455.21023-1-jiangshanlai@gmail.com>
Cc: stable@vger.kernel.org
Fixes: cea0f0e7ea54 ("[PATCH] KVM: MMU: Shadow page table caching")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel/uncore: Fix M2M event umask for Ice Lake server

commit 848ff3768684701a4ce73a2ec0e5d438d4e2b0da upstream.

Perf tool errors out with the latest event list for the Ice Lake server.

event syntax error: 'unc_m2m_imc_reads.to_pmm'
                           \___ value too big for format, maximum is 255

The same as the Snow Ridge server, the M2M uncore unit in the Ice Lake
server has the unit mask extension field as well.

Fixes: 2b3b76b5ec67 ("perf/x86/intel/uncore: Add Ice Lake server uncore support")
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1622552943-119174-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: Lock pointer access in drm_master_release()

commit c336a5ee984708db4826ef9e47d184e638e29717 upstream.

This patch eliminates the following smatch warning:
drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex'

The 'file_priv->master' field should be protected by the mutex lock to
'&dev->master_mutex'. This is because other processes can concurrently
modify this field and free the current 'file_priv->master'
pointer. This could result in a use-after-free error when 'master' is
dereferenced in subsequent function calls to
'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'.

An example of a scenario that would produce this error can be seen
from a similar bug in 'drm_getunique()' that was reported by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803

In the Syzbot report, another process concurrently acquired the
device's master mutex in 'drm_setmaster_ioctl()', then overwrote
'fpriv->master' in 'drm_new_set_master()'. The old value of
'fpriv->master' was subsequently freed before the mutex was unlocked.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609092119.173590-1-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: Fix use-after-free read in drm_getunique()

commit b436acd1cf7fac0ba987abd22955d98025c80c2b upstream.

There is a time-of-check-to-time-of-use error in drm_getunique() due
to retrieving file_priv->master prior to locking the device's master
mutex.

An example can be seen in the crash report of the use-after-free error
found by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803

In the report, the master pointer was used after being freed. This is
because another process had acquired the device's master mutex in
drm_setmaster_ioctl(), then overwrote fpriv->master in
drm_new_set_master(). The old value of fpriv->master was subsequently
freed before the mutex was unlocked.

To fix this, we lock the device's master mutex before retrieving the
pointer from from fpriv->master. This patch passes the Syzbot
reproducer test.

Reported-by: syzbot+c3a706cec1ea99e1c693@syzkaller.appspotmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608110436.239583-1-desmondcheongzx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ACPI: sleep: Put the FACS table after using it"

commit f1ffa9d4cccc8fdf6c03fb1b3429154d22037988 upstream.

Commit 95722237cb2a ("ACPI: sleep: Put the FACS table after using it")
puts the FACS table during initialization.

But the hardware signature bits in the FACS table need to be accessed,
after every hibernation, to compare with the original hardware
signature.

So there is no reason to release the FACS table mapping after
initialization.

This reverts commit 95722237cb2ae4f7b73471058cdb19e8f4057c93.

An alternative solution is to use acpi_gbl_FACS variable instead, which
is mapped by the ACPICA core and never released.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=212277
Reported-by: Stephan Hohe <sth.dev@tejp.de>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: 5.8+ <stable@vger.kernel.org> # 5.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: bcm2835: Fix out-of-bounds access with more than 4 slaves

commit 13817d466eb8713a1ffd254f537402f091d48444 upstream.

Commit 571e31fa60b3 ("spi: bcm2835: Cache CS register value for
->prepare_message()") limited the number of slaves to 3 at compile-time.
The limitation was necessitated by a statically-sized array prepare_cs[]
in the driver private data which contains a per-slave register value.

The commit sought to enforce the limitation at run-time by setting the
controller's num_chipselect to 3:  Slaves with a higher chipselect are
rejected by spi_add_device().

However the commit neglected that num_chipselect only limits the number
of *native* chipselects.  If GPIO chipselects are specified in the
device tree for more than 3 slaves, num_chipselect is silently raised by
of_spi_get_gpio_numbers() and the result are out-of-bounds accesses to
the statically-sized array prepare_cs[].

As a bandaid fix which is backportable to stable, raise the number of
allowed slaves to 24 (which "ought to be enough for anybody"), enforce
the limitation on slave ->setup and revert num_chipselect to 3 (which is
the number of native chipselects supported by the controller).
An upcoming for-next commit will allow an arbitrary number of slaves.

Fixes: 571e31fa60b3 ("spi: bcm2835: Cache CS register value for ->prepare_message()")
Reported-by: Joe Burmeister <joe.burmeister@devtank.co.uk>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v5.4+
Cc: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/75854affc1923309fde05e47494263bde73e5592.1621703210.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix mute/micmute LEDs for HP ZBook Power G8

commit 600dd2a7e8b62170d177381cc1303861f48f9780 upstream.

The HP ZBook Power G8 using ALC236 codec which using 0x02 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608114750.32009-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 840 Aero G8

commit dfb06401b4cdfc71e2fc3e19b877ab845cc9f7f7 upstream.

The HP EliteBook 840 Aero G8 using ALC285 codec which using 0x04 to
control mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210605082539.41797-3-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP EliteBook x360 1040 G8

commit 61d3e87468fad82dc8e8cb6de7db563ada64b532 upstream.

The HP EliteBook x360 1040 G8 using ALC285 codec which using 0x04 to control
mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210605082539.41797-2-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Elite Dragonfly G2

commit 15d295b560e6dd45f839a53ae69e4f63b54eb32f upstream.

The HP Elite Dragonfly G2 using ALC285 codec which using 0x04 to control
mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210605082539.41797-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: headphone and mic don't work on an Acer laptop

commit 57c9e21a49b1c196cda28f54de9a5d556ac93f20 upstream.

There are 2 issues on this machine, the 1st one is mic's plug/unplug
can't be detected, that is because the mic is set to manual detecting
mode, need to apply ALC255_FIXUP_XIAOMI_HEADSET_MIC to set it to auto
detecting mode. The other one is headphone's plug/unplug can't be
detected by pulseaudio, that is because the pulseaudio will use
ucm2/sof-hda-dsp on this machine, and the ucm2 only handle
'Headphone Jack', but on this machine the headphone's pincfg sets the
location to Front, then the alsa mixer name is "Front Headphone Jack"
instead of "Headphone Jack", so override the pincfg to change location
to Left.

BugLink: http://bugs.launchpad.net/bugs/1930188
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210608024600.6198-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: firewire-lib: fix the context to call snd_pcm_stop_xrun()

commit 9981b20a5e3694f4625ab5a1ddc98ce7503f6d12 upstream.

In the workqueue to queue wake-up event, isochronous context is not
processed, thus it's useless to check context for the workqueue to switch
status of runtime for PCM substream to XRUN. On the other hand, in
software IRQ context of 1394 OHCI, it's needed.

This commit fixes the bug introduced when tasklet was replaced with
workqueue.

Cc: <stable@vger.kernel.org>
Fixes: 2b3d2987d800 ("ALSA: firewire: Replace tasklet with work")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210605091054.68866-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Fix race of snd_seq_timer_open()

commit 83e197a8414c0ba545e7e3916ce05f836f349273 upstream.

The timer instance per queue is exclusive, and snd_seq_timer_open()
should have managed the concurrent accesses.  It looks as if it's
checking the already existing timer instance at the beginning, but
it's not right, because there is no protection, hence any later
concurrent call of snd_seq_timer_open() may override the timer
instance easily.  This may result in UAF, as the leftover timer
instance can keep running while the queue itself gets closed, as
spotted by syzkaller recently.

For avoiding the race, add a proper check at the assignment of
tmr->timeri again, and return -EBUSY if it's been already registered.

Reported-by: syzbot+ddc1260a83ed1cbf6fb5@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000dce34f05c42f110c@google.com
Link: https://lore.kernel.org/r/20210610152059.24633-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: mpc: implement erratum A-004447 workaround

[ Upstream commit 8f0cdec8b5fd94135d643662506ee94ae9e98785 ]

The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: mpc: Make use of i2c_recover_bus()

[ Upstream commit 65171b2df15eb7545431d75c2729b5062da89b43 ]

Move the existing calls of mpc_i2c_fixup() to a recovery function
registered via bus_recovery_info. This makes it more obvious that
recovery is supported and allows for a future where recovery is
triggered by the i2c core.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: Cleanup on failure of initial setup

[ Upstream commit 2ec6f20b33eb4f62ab90bdcd620436c883ec3af6 ]

Commit c7299fea6769 ("spi: Fix spi device unregister flow") changed the
SPI core's behavior if the ->setup() hook returns an error upon adding
an spi_device:  Before, the ->cleanup() hook was invoked to free any
allocations that were made by ->setup().  With the commit, that's no
longer the case, so the ->setup() hook is expected to free the
allocations itself.

I've identified 5 drivers which depend on the old behavior and am fixing
them up hereinafter: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c
spi-omap2-mcspi.c spi-pxa2xx.c

Importantly, ->setup() is not only invoked on spi_device *addition*:
It may subsequently be called to *change* SPI parameters.  If changing
these SPI parameters fails, freeing memory allocations would be wrong.
That should only be done if the spi_device is finally destroyed.
I am therefore using a bool "initial_setup" in 4 of the affected drivers
to differentiate between the invocation on *adding* the spi_device and
any subsequent invocations: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c
spi-omap2-mcspi.c

In spi-pxa2xx.c, it seems the ->setup() hook can only fail on spi_device
addition, not any subsequent calls.  It therefore doesn't need the bool.

It's worth noting that 5 other drivers already perform a cleanup if the
->setup() hook fails.  Before c7299fea6769, they caused a double-free
if ->setup() failed on spi_device addition.  Since the commit, they're
fine.  These drivers are: spi-mpc512x-psc.c spi-pl022.c spi-s3c64xx.c
spi-st-ssc4.c spi-tegra114.c

(spi-pxa2xx.c also already performs a cleanup, but only in one of
several error paths.)

Fixes: c7299fea6769 ("spi: Fix spi device unregister flow")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Saravana Kannan <saravanak@google.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # pxa2xx
Link: https://lore.kernel.org/r/f76a0599469f265b69c371538794101fa37b5536.1622149321.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: Don't have controller clean up spi device before driver unbind

[ Upstream commit 27e7db56cf3dffd302bd7ddfacb1d405cf671a2a ]

When a spi device is unregistered and triggers a driver unbind, the
driver might need to access the spi device. So, don't have the
controller clean up the spi device before the driver is unbound. Clean
up the spi device after the driver is unbound.

Fixes: c7299fea6769 ("spi: Fix spi device unregister flow")
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210505164734.175546-1-saravanak@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers

[ Upstream commit 19ae697a1e4edf1d755b413e3aa38da65e2db23b ]

The i2c controllers on the P1010 have an erratum where the documented
scheme for i2c bus recovery will not work (A-004447). A different
mechanism is needed which is documented in the P1010 Chip Errata Rev L.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers

[ Upstream commit 7adc7b225cddcfd0f346d10144fd7a3d3d9f9ea7 ]

The i2c controllers on the P2040/P2041 have an erratum where the
documented scheme for i2c bus recovery will not work (A-004447). A
different mechanism is needed which is documented in the P2040 Chip
Errata Rev Q (latest available at the time of writing).

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: fix false keep-alive timeout when a controller is torn down

[ Upstream commit aaeadd7075dc9e184bc7876e9dd7b3bada771df2 ]

Controller teardown flow may take some time in case it has many I/O
queues, and the host may not send us keep-alive during this period.
Hence reset the traffic based keep-alive timer so we don't trigger
a controller teardown as a result of a keep-alive expiration.

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME

[ Upstream commit 042a3eaad6daeabcfaf163aa44da8ea3cf8b5496 ]

We need to select NVME_CORE.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnx2x: Fix missing error code in bnx2x_iov_init_one()

[ Upstream commit 65161c35554f7135e6656b3df1ce2c500ca0bdcf ]

Eliminate the follow smatch warning:

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227
bnx2x_iov_init_one() warn: missing error code 'err'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm verity: fix require_signatures module_param permissions

[ Upstream commit 0c1f3193b1cdd21e7182f97dc9bca7d284d18a15 ]

The third parameter of module_param() is permissions for the sysfs node
but it looks like it is being used as the initial value of the parameter
here.  In fact, false here equates to omitting the file from sysfs and
does not affect the value of require_signatures.

Making the parameter writable is not simple because going from
false->true is fine but it should not be possible to remove the
requirement to verify a signature.  But it can be useful to inspect the
value of this parameter from userspace, so change the permissions to
make a read-only file in sysfs.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER

[ Upstream commit 78cf0eb926cb1abeff2106bae67752e032fe5f3e ]

When update the latest mainline kernel with the following three configs,
the kernel hangs during startup:

(1) CONFIG_FUNCTION_GRAPH_TRACER=y
(2) CONFIG_PREEMPT_TRACER=y
(3) CONFIG_FTRACE_STARTUP_TEST=y

When update the latest mainline kernel with the above two configs (1)
and (2), the kernel starts normally, but it still hangs when execute
the following command:

echo "function_graph" > /sys/kernel/debug/tracing/current_tracer

Without CONFIG_PREEMPT_TRACER=y, the above two kinds of kernel hangs
disappeared, so it seems that CONFIG_PREEMPT_TRACER has some influences
with function_graph tracer at the first glance.

I use ejtag to find out the epc address is related with preempt_enable()
in the file arch/mips/lib/mips-atomic.c, because function tracing can
trace the preempt_{enable,disable} calls that are traced, replace them
with preempt_{enable,disable}_notrace to prevent function tracing from
going into an infinite loop, and then it can fix the kernel hang issue.

By the way, it seems that this commit is a complement and improvement of
commit f93a1a00f2bd ("MIPS: Fix crash that occurs when function tracing
is enabled").

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-fabrics: decode host pathing error for connect

[ Upstream commit 4d9442bf263ac45d495bb7ecf75009e59c0622b2 ]

Add an additional decoding for 'host pathing error' during connect.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: microchip: enable phy errata workaround on 9567

[ Upstream commit 8c42a49738f16af0061f9ae5c2f5a955f268d9e3 ]

Also enable phy errata workaround on 9567 since has the same errata as
the 9477 according to the manufacture's documentation.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: appletalk: cops: Fix data race in cops_probe1

[ Upstream commit a4dd4fc6105e54393d637450a11d4cddb5fabc4f ]

In cops_probe1(), there is a write to dev->base_addr after requesting an
interrupt line and registering the interrupt handler cops_interrupt().
The handler might be called in parallel to handle an interrupt.
cops_interrupt() tries to read dev->base_addr leading to a potential
data race. So write to dev->base_addr before calling request_irq().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Saubhik Mukherjee <saubhik.mukherjee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macb: ensure the device is available before accessing GEMGXL control registers

[ Upstream commit 5eff1461a6dec84f04fafa9128548bad51d96147 ]

If runtime power menagement is enabled, the gigabit ethernet PLL would
be disabled after macb_probe(). During this period of time, the system
would hang up if we try to access GEMGXL control registers.

We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of
sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping
function called from invalid context"). Add netif_running checking to
ensure the device is available before accessing GEMGXL device.

Changed in v2:
 - Use netif_running instead of its own flag

Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal

[ Upstream commit 2ef7665dfd88830f15415ba007c7c9a46be7acd8 ]

Target de-configuration panics at high CPU load because TPGT and WWPN can
be removed on separate threads.

TPGT removal requests a reset HBA on a separate thread and waits for reset
complete (phase1). Due to high CPU load that HBA reset can be delayed for
some time.

WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has
already completed and thus tgt.tgt_ops is subsequently cleared. However,
tgt.tgt_ops is needed to process incoming traffic and therefore this will
cause one of the following panics:

NIP qlt_reset+0x7c/0x220 [qla2xxx]
LR  qlt_reset+0x68/0x220 [qla2xxx]
Call Trace:
0xc000003ffff63a78 (unreliable)
qlt_handle_imm_notify+0x800/0x10c0 [qla2xxx]
qlt_24xx_atio_pkt+0x208/0x590 [qla2xxx]
qlt_24xx_process_atio_queue+0x33c/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]

or

NIP qlt_24xx_handle_abts+0xd0/0x2a0 [qla2xxx]
LR  qlt_24xx_handle_abts+0xb4/0x2a0 [qla2xxx]
Call Trace:
qlt_24xx_handle_abts+0x90/0x2a0 [qla2xxx] (unreliable)
qlt_24xx_process_atio_queue+0x500/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]

or

NIP qlt_create_sess+0x90/0x4e0 [qla2xxx]
LR  qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
Call Trace:
0xc0000000348fba30 (unreliable)
qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
qla2x00_do_work+0x674/0xbf0 [qla2xxx]
qla2x00_iocb_work_fn

The patch fixes the issue by serializing qlt_stop_phase1() and
qlt_stop_phase2() functions to make WWPN removal wait for phase1
completion.

Link: https://lore.kernel.org/r/20210415203554.27890-1-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq

[ Upstream commit 7907a021e4bbfa29cccacd2ba2dade894d9a7d4c ]

irqs allocated with devm_request_irq() should not be freed using
free_irq(). Doing so causes a dangling pointer and a subsequent double
free.

Link: https://lore.kernel.org/r/20210519130519.2661938-1-yangyingliang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: vmw_pvscsi: Set correct residual data length

[ Upstream commit e662502b3a782d479e67736a5a1c169a703d853a ]

Some commands (such as INQUIRY) may return less data than the initiator
requested. To avoid conducting useless information, set the right residual
count to make upper layer aware of this.

Before (INQUIRY PAGE 0xB0 with 128B buffer):

$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00
SCSI Status: Good

Received 128 bytes of data:
 00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............
 10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@....
 20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... .....
 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

After:

$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00
SCSI Status: Good

Received 64 bytes of data:
00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............
10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@....
20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... .....
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

[mkp: clarified description]

Link: https://lore.kernel.org/r/03C41093-B62E-43A2-913E-CFC92F1C70C3@vmware.com
Signed-off-by: Matt Wang <wwentao@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: bnx2fc: Return failure if io_req is already in ABTS processing

[ Upstream commit 122c81c563b0c1c6b15ff76a9159af5ee1f21563 ]

Return failure from bnx2fc_eh_abort() if io_req is already in ABTS
processing.

Link: https://lore.kernel.org/r/20210519061416.19321-1-jhasan@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net:sfc: fix non-freed irq in legacy irq mode

[ Upstream commit 8f03eeb6e0a0a0b8d617ee0a4bce729e47130036 ]

SFC driver can be configured via modparam to work using MSI-X, MSI or
legacy IRQ interrupts. In the last one, the interrupt was not properly
released on module remove.

It was not freed because the flag irqs_hooked was not set during
initialization in the case of using legacy IRQ.

Example of (trimmed) trace during module remove without this fix:

remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1'
WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170
...trimmed...
Call Trace:
 unregister_irq_proc+0xe3/0x100
 free_desc+0x29/0x70
 irq_free_descs+0x47/0x70
 mp_unmap_irq+0x58/0x60
 acpi_unregister_gsi_ioapic+0x2a/0x40
 acpi_pci_irq_disable+0x78/0xb0
 pci_disable_device+0xd1/0x100
 efx_pci_remove+0xa1/0x1e0 [sfc]
 pci_device_remove+0x38/0xa0
 __device_release_driver+0x177/0x230
 driver_detach+0xcb/0x110
 bus_remove_driver+0x58/0xd0
 pci_unregister_driver+0x2a/0xb0
 efx_exit_module+0x24/0xf40 [sfc]
 __do_sys_delete_module.constprop.0+0x171/0x280
 ? exit_to_user_mode_prepare+0x83/0x1d0
 do_syscall_64+0x3d/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f9f9385800b
...trimmed...

Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDS tcp loopback connection can hang

[ Upstream commit aced3ce57cd37b5ca332bcacd370d01f5a8c5371 ]

When TCP is used as transport and a program on the
system connects to RDS port 16385, connection is
accepted but denied per the rules of RDS. However,
RDS connections object is left in the list. Next
loopback connection will select that connection
object as it is at the head of list. The connection
attempt will hang as the connection object is set
to connect over TCP which is not allowed

The issue can be reproduced easily, use rds-ping
to ping a local IP address. After that use any
program like ncat to connect to the same IP
address and port 16385. This will hang so ctrl-c out.
Now try rds-ping, it will hang.

To fix the issue this patch adds checks to disallow
the connection object creation and destroys the
connection object.

Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/qla3xxx: fix schedule while atomic in ql_sem_spinlock

[ Upstream commit 13a6f3153922391e90036ba2267d34eed63196fc ]

When calling the 'ql_sem_spinlock', the driver has already acquired the
spin lock, so the driver should not call 'ssleep' in atomic context.

This bug can be fixed by using 'mdelay' instead of 'ssleep'.

The KASAN's log reveals it:

[    3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002
[    3.238748 ] 2 locks held by swapper/0/1:
[    3.239151 ]  #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at:
__device_driver_lock+0x41/0x60
[    3.240026 ]  #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at:
ql3xxx_probe+0x2aa/0xea0
[    3.240873 ] Modules linked in:
[    3.241187 ] irq event stamp: 460854
[    3.241541 ] hardirqs last  enabled at (460853): [<ffffffff843051bf>]
_raw_spin_unlock_irqrestore+0x4f/0x70
[    3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>]
_raw_spin_lock_irqsave+0x2a/0x70
[    3.242245 ] softirqs last  enabled at (446076): [<ffffffff846002e4>]
__do_softirq+0x2e4/0x4b1
[    3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>]
irq_exit_rcu+0x100/0x110
[    3.242245 ] Preemption disabled at:
[    3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0
[    3.242245 ] Kernel panic - not syncing: scheduling while atomic
[    3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00145
-gee7dc339169-dirty #16
[    3.242245 ] Call Trace:
[    3.242245 ]  dump_stack+0xba/0xf5
[    3.242245 ]  ? ql3xxx_probe+0x1f0/0xea0
[    3.242245 ]  panic+0x15a/0x3f2
[    3.242245 ]  ? vprintk+0x76/0x150
[    3.242245 ]  ? ql3xxx_probe+0x2aa/0xea0
[    3.242245 ]  __schedule_bug+0xae/0xe0
[    3.242245 ]  __schedule+0x72e/0xa00
[    3.242245 ]  schedule+0x43/0xf0
[    3.242245 ]  schedule_timeout+0x28b/0x500
[    3.242245 ]  ? del_timer_sync+0xf0/0xf0
[    3.242245 ]  ? msleep+0x2f/0x70
[    3.242245 ]  msleep+0x59/0x70
[    3.242245 ]  ql3xxx_probe+0x307/0xea0
[    3.242245 ]  ? _raw_spin_unlock_irqrestore+0x3a/0x70
[    3.242245 ]  ? pci_device_remove+0x110/0x110
[    3.242245 ]  local_pci_probe+0x45/0xa0
[    3.242245 ]  pci_device_probe+0x12b/0x1d0
[    3.242245 ]  really_probe+0x2a9/0x610
[    3.242245 ]  driver_probe_device+0x90/0x1d0
[    3.242245 ]  ? mutex_lock_nested+0x1b/0x20
[    3.242245 ]  device_driver_attach+0x68/0x70
[    3.242245 ]  __driver_attach+0x124/0x1b0
[    3.242245 ]  ? device_driver_attach+0x70/0x70
[    3.242245 ]  bus_for_each_dev+0xbb/0x110
[    3.242245 ]  ? rdinit_setup+0x45/0x45
[    3.242245 ]  driver_attach+0x27/0x30
[    3.242245 ]  bus_add_driver+0x1eb/0x2a0
[    3.242245 ]  driver_register+0xa9/0x180
[    3.242245 ]  __pci_register_driver+0x82/0x90
[    3.242245 ]  ? yellowfin_init+0x25/0x25
[    3.242245 ]  ql3xxx_driver_init+0x23/0x25
[    3.242245 ]  do_one_initcall+0x7f/0x3d0
[    3.242245 ]  ? rdinit_setup+0x45/0x45
[    3.242245 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.242245 ]  kernel_init_freeable+0x2aa/0x301
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  kernel_init+0x18/0x190
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  ret_from_fork+0x1f/0x30
[    3.242245 ] Dumping ftrace buffer:
[    3.242245 ]    (ftrace buffer empty)
[    3.242245 ] Kernel Offset: disabled
[    3.242245 ] Rebooting in 1 seconds.

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wq: handle VM suspension in stall detection

[ Upstream commit 940d71c6462e8151c78f28e4919aa8882ff2054e ]

If VCPU is suspended (VM suspend) in wq_watchdog_timer_fn() then
once this VCPU resumes it will see the new jiffies value, while it
may take a while before IRQ detects PVCLOCK_GUEST_STOPPED on this
VCPU and updates all the watchdogs via pvclock_touch_watchdogs().
There is a small chance of misreported WQ stalls in the meantime,
because new jiffies is time_after() old 'ts + thresh'.

wq_watchdog_timer_fn()
{
for_each_pool(pool, pi) {
if (time_after(jiffies, ts + thresh)) {
pr_emerg("BUG: workqueue lockup - pool");
}
}
}

Save jiffies at the beginning of this function and use that value
for stall detection. If VM gets suspended then we continue using
"old" jiffies value and old WQ touch timestamps. If IRQ at some
point restarts the stall detection cycle (pvclock_touch_watchdogs())
then old jiffies will always be before new 'ts + thresh'.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup: disable controllers at parse time

[ Upstream commit 45e1ba40837ac2f6f4d4716bddb8d44bd7e4a251 ]

This patch effectively reverts the commit a3e72739b7a7 ("cgroup: fix
too early usage of static_branch_disable()"). The commit 6041186a3258
("init: initialize jump labels before command line option parsing") has
moved the jump_label_init() before parse_args() which has made the
commit a3e72739b7a7 unnecessary. On the other hand there are
consequences of disabling the controllers later as there are subsystems
doing the controller checks for different decisions. One such incident
is reported [1] regarding the memory controller and its impact on memory
reclaim code.

[1] https://lore.kernel.org/linux-mm/921e53f3-4b13-aab8-4a9e-e83ff15371e4@nec.com

Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: NOMURA JUNICHI(野村　淳一) <junichi.nomura@nec.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Jun'ichi Nomura <junichi.nomura@nec.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mdiobus: get rid of a BUG_ON()

[ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ]

We spotted a bug recently during a review where a driver was
unregistering a bus that wasn't registered, which would trigger this
BUG_ON().  Let's handle that situation more gracefully, and just print
a warning and return.

Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlink: disable IRQs for netlink_lock_table()

[ Upstream commit 1d482e666b8e74c7555dbdfbfb77205eeed3ff2d ]

Syzbot reports that in mac80211 we have a potential deadlock
between our "local->stop_queue_reasons_lock" (spinlock) and
netlink's nl_table_lock (rwlock). This is because there's at
least one situation in which we might try to send a netlink
message with this spinlock held while it is also possible to
take the spinlock from a hardirq context, resulting in the
following deadlock scenario reported by lockdep:

       CPU0                    CPU1
       ----                    ----
  lock(nl_table_lock);
                               local_irq_disable();
                               lock(&local->queue_stop_reason_lock);
                               lock(nl_table_lock);
  <Interrupt>
    lock(&local->queue_stop_reason_lock);

This seems valid, we can take the queue_stop_reason_lock in
any kind of context ("CPU0"), and call ieee80211_report_ack_skb()
with the spinlock held and IRQs disabled ("CPU1") in some
code path (ieee80211_do_stop() via ieee80211_free_txskb()).

Short of disallowing netlink use in scenarios like these
(which would be rather complex in mac80211's case due to
the deep callchain), it seems the only fix for this is to
disable IRQs while nl_table_lock is held to avoid hitting
this scenario, this disallows the "CPU0" portion of the
reported deadlock.

Note that the writer side (netlink_table_grab()) already
disables IRQs for this lock.

Unfortunately though, this seems like a huge hammer, and
maybe the whole netlink table locking should be reworked.

Reported-by: syzbot+69ff9dff50dcfe14ddd4@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: init notify_work earlier to avoid uninitialized use

[ Upstream commit 35d96e631860226d5dc4de0fad0a415362ec2457 ]

If bond_kobj_init() or later kzalloc() in bond_alloc_slave() fail,
then we call kobject_put() on the slave->kobj. This in turn calls
the release function slave_kobj_release() which will always try to
cancel_delayed_work_sync(&slave->notify_work), which shouldn't be
done on an uninitialized work struct.

Always initialize the work struct earlier to avoid problems here.

Syzbot bisected this down to a completely pointless commit, some
fault injection may have been at work here that caused the alloc
failure in the first place, which may interact badly with bisect.

Reported-by: syzbot+bfda097c12a00c8cae67@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

isdn: mISDN: netjet: Fix crash in nj_probe:

[ Upstream commit 9f6f852550d0e1b7735651228116ae9d300f69b3 ]

'nj_setup' in netjet.c might fail with -EIO and in this case
'card->irq' is initialized and is bigger than zero. A subsequent call to
'nj_release' will free the irq that has not been requested.

Fix this bug by deleting the previous assignment to 'card->irq' and just
keep the assignment before 'request_irq'.

The KASAN's log reveals it:

[    3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826
free_irq+0x100/0x480
[    3.355112 ] Modules linked in:
[    3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[    3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.356552 ] RIP: 0010:free_irq+0x100/0x480
[    3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18
4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5
ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[    3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[    3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[    3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[    3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[    3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[    3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8
[    3.360652 ] FS:  0000000000000000(0000) GS:ffff88817bc00000(0000)
knlGS:0000000000000000
[    3.361170 ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4:
00000000000006f0
[    3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[    3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[    3.362175 ] Call Trace:
[    3.362175 ]  nj_release+0x51/0x1e0
[    3.362175 ]  nj_probe+0x450/0x950
[    3.362175 ]  ? pci_device_remove+0x110/0x110
[    3.362175 ]  local_pci_probe+0x45/0xa0
[    3.362175 ]  pci_device_probe+0x12b/0x1d0
[    3.362175 ]  really_probe+0x2a9/0x610
[    3.362175 ]  driver_probe_device+0x90/0x1d0
[    3.362175 ]  ? mutex_lock_nested+0x1b/0x20
[    3.362175 ]  device_driver_attach+0x68/0x70
[    3.362175 ]  __driver_attach+0x124/0x1b0
[    3.362175 ]  ? device_driver_attach+0x70/0x70
[    3.362175 ]  bus_for_each_dev+0xbb/0x110
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  driver_attach+0x27/0x30
[    3.362175 ]  bus_add_driver+0x1eb/0x2a0
[    3.362175 ]  driver_register+0xa9/0x180
[    3.362175 ]  __pci_register_driver+0x82/0x90
[    3.362175 ]  ? w6692_init+0x38/0x38
[    3.362175 ]  nj_init+0x36/0x38
[    3.362175 ]  do_one_initcall+0x7f/0x3d0
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.362175 ]  kernel_init_freeable+0x2aa/0x301
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  kernel_init+0x18/0x190
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ret_from_fork+0x1f/0x30
[    3.362175 ] Kernel panic - not syncing: panic_on_warn set ...
[    3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[    3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.362175 ] Call Trace:
[    3.362175 ]  dump_stack+0xba/0xf5
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  panic+0x15a/0x3f2
[    3.362175 ]  ? __warn+0xf2/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  __warn+0x108/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  report_bug+0x119/0x1c0
[    3.362175 ]  handle_bug+0x3b/0x80
[    3.362175 ]  exc_invalid_op+0x18/0x70
[    3.362175 ]  asm_exc_invalid_op+0x12/0x20
[    3.362175 ] RIP: 0010:free_irq+0x100/0x480
[    3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18
4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5
ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[    3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[    3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[    3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[    3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[    3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[    3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8
[    3.362175 ]  ? vprintk+0x76/0x150
[    3.362175 ]  ? free_irq+0x100/0x480
[    3.362175 ]  nj_release+0x51/0x1e0
[    3.362175 ]  nj_probe+0x450/0x950
[    3.362175 ]  ? pci_device_remove+0x110/0x110
[    3.362175 ]  local_pci_probe+0x45/0xa0
[    3.362175 ]  pci_device_probe+0x12b/0x1d0
[    3.362175 ]  really_probe+0x2a9/0x610
[    3.362175 ]  driver_probe_device+0x90/0x1d0
[    3.362175 ]  ? mutex_lock_nested+0x1b/0x20
[    3.362175 ]  device_driver_attach+0x68/0x70
[    3.362175 ]  __driver_attach+0x124/0x1b0
[    3.362175 ]  ? device_driver_attach+0x70/0x70
[    3.362175 ]  bus_for_each_dev+0xbb/0x110
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  driver_attach+0x27/0x30
[    3.362175 ]  bus_add_driver+0x1eb/0x2a0
[    3.362175 ]  driver_register+0xa9/0x180
[    3.362175 ]  __pci_register_driver+0x82/0x90
[    3.362175 ]  ? w6692_init+0x38/0x38
[    3.362175 ]  nj_init+0x36/0x38
[    3.362175 ]  do_one_initcall+0x7f/0x3d0
[    3.362175 ]  ? rdinit_setup+0x45/0x45
[    3.362175 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.362175 ]  kernel_init_freeable+0x2aa/0x301
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  kernel_init+0x18/0x190
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ? rest_init+0x2c0/0x2c0
[    3.362175 ]  ret_from_fork+0x1f/0x30
[    3.362175 ] Dumping ftrace buffer:
[    3.362175 ]    (ftrace buffer empty)
[    3.362175 ] Kernel Offset: disabled
[    3.362175 ] Rebooting in 1 seconds..

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: chipidea: udc: assign interrupt number to USB gadget structure

[ Upstream commit 9e3927f6373da54cb17e17f4bd700907e1123d2f ]

Chipidea also need sync interrupt before unbind the udc while
gadget remove driver, otherwise setup irq handling may happen
while unbind, see below dump generated from android function
switch stress test:

[ 4703.503056] android_work: sent uevent USB_STATE=CONNECTED
[ 4703.514642] android_work: sent uevent USB_STATE=DISCONNECTED
[ 4703.651339] android_work: sent uevent USB_STATE=CONNECTED
[ 4703.661806] init: Control message: Processed ctl.stop for 'adbd' from pid: 561 (system_server)
[ 4703.673469] init: processing action (init.svc.adbd=stopped) from (/system/etc/init/hw/init.usb.configfs.rc:14)
[ 4703.676451] Unable to handle kernel read from unreadable memory at virtual address 0000000000000090
[ 4703.676454] Mem abort info:
[ 4703.676458]   ESR = 0x96000004
[ 4703.676461]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 4703.676464]   SET = 0, FnV = 0
[ 4703.676466]   EA = 0, S1PTW = 0
[ 4703.676468] Data abort info:
[ 4703.676471]   ISV = 0, ISS = 0x00000004
[ 4703.676473]   CM = 0, WnR = 0
[ 4703.676478] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004a867000
[ 4703.676481] [0000000000000090] pgd=0000000000000000, p4d=0000000000000000
[ 4703.676503] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 4703.758297] Modules linked in: synaptics_dsx_i2c moal(O) mlan(O)
[ 4703.764327] CPU: 0 PID: 235 Comm: lmkd Tainted: G        W  O      5.10.9-00001-g3f5fd8487c38-dirty #63
[ 4703.773720] Hardware name: NXP i.MX8MNano EVK board (DT)
[ 4703.779033] pstate: 60400085 (nZCv daIf +PAN -UAO -TCO BTYPE=--)
[ 4703.785046] pc : _raw_write_unlock_bh+0xc0/0x2c8
[ 4703.789667] lr : android_setup+0x4c/0x168
[ 4703.793676] sp : ffff80001256bd80
[ 4703.796989] x29: ffff80001256bd80 x28: 00000000000000a8
[ 4703.802304] x27: ffff800012470000 x26: ffff80006d923000
[ 4703.807616] x25: ffff800012471000 x24: ffff00000b091140
[ 4703.812929] x23: ffff0000077dbd38 x22: ffff0000077da490
[ 4703.818242] x21: ffff80001256be30 x20: 0000000000000000
[ 4703.823554] x19: 0000000000000080 x18: ffff800012561048
[ 4703.828867] x17: 0000000000000000 x16: 0000000000000039
[ 4703.834180] x15: ffff8000106ad258 x14: ffff80001194c277
[ 4703.839493] x13: 0000000000003934 x12: 0000000000000000
[ 4703.844805] x11: 0000000000000000 x10: 0000000000000001
[ 4703.850117] x9 : 0000000000000000 x8 : 0000000000000090
[ 4703.855429] x7 : 6f72646e61203a70 x6 : ffff8000124f2450
[ 4703.860742] x5 : ffffffffffffffff x4 : 0000000000000009
[ 4703.866054] x3 : ffff8000108a290c x2 : ffff00007fb3a9c8
[ 4703.871367] x1 : 0000000000000000 x0 : 0000000000000090
[ 4703.876681] Call trace:
[ 4703.879129]  _raw_write_unlock_bh+0xc0/0x2c8
[ 4703.883397]  android_setup+0x4c/0x168
[ 4703.887059]  udc_irq+0x824/0xa9c
[ 4703.890287]  ci_irq+0x124/0x148
[ 4703.893429]  __handle_irq_event_percpu+0x84/0x268
[ 4703.898131]  handle_irq_event+0x64/0x14c
[ 4703.902054]  handle_fasteoi_irq+0x110/0x210
[ 4703.906236]  __handle_domain_irq+0x8c/0xd4
[ 4703.910332]  gic_handle_irq+0x6c/0x124
[ 4703.914081]  el1_irq+0xdc/0x1c0
[ 4703.917221]  _raw_spin_unlock_irq+0x20/0x54
[ 4703.921405]  finish_task_switch+0x84/0x224
[ 4703.925502]  __schedule+0x4a4/0x734
[ 4703.928990]  schedule+0xa0/0xe8
[ 4703.932132]  do_notify_resume+0x150/0x184
[ 4703.936140]  work_pending+0xc/0x40c
[ 4703.939633] Code: d5384613 521b0a69 d5184609 f9800111 (885ffd01)
[ 4703.945732] ---[ end trace ba5c1875ae49d53c ]---
[ 4703.950350] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 4703.957223] SMP: stopping secondary CPUs
[ 4703.961151] Kernel Offset: disabled
[ 4703.964638] CPU features: 0x0240002,2000200c
[ 4703.968905] Memory Limit: none
[ 4703.971963] Rebooting in 5 seconds..

Tested-by: faqiang.zhu <faqiang.zhu@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1620989984-7653-1-git-send-email-jun.li@nxp.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: sprd: Add missing MODULE_DEVICE_TABLE

[ Upstream commit 7907cad7d07e0055789ec0c534452f19dfe1fc80 ]

MODULE_DEVICE_TABLE is used to extract the device information out of the
driver and builds a table when being compiled. If using this macro,
kernel can find the driver if available when the device is plugged in,
and then loads that driver and initializes the device.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20210512093534.243040-1-zhang.lyra@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: sti-sas: add missing MODULE_DEVICE_TABLE

[ Upstream commit e072b2671606c77538d6a4dd5dda80b508cb4816 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620789145-14936-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio-ccw: Serialize FSM IDLE state with I/O completion

[ Upstream commit 2af7a834a435460d546f0cf0a8b8e4d259f1d910 ]

Today, the stacked call to vfio_ccw_sch_io_todo() does three things:

  1) Update a solicited IRB with CP information, and release the CP
     if the interrupt was the end of a START operation.
  2) Copy the IRB data into the io_region, under the protection of
     the io_mutex
  3) Reset the vfio-ccw FSM state to IDLE to acknowledge that
     vfio-ccw can accept more work.

The trouble is that step 3 is (A) invoked for both solicited and
unsolicited interrupts, and (B) sitting after the mutex for step 2.
This second piece becomes a problem if it processes an interrupt
for a CLEAR SUBCHANNEL while another thread initiates a START,
thus allowing the CP and FSM states to get out of sync. That is:

    CPU 1                           CPU 2
    fsm_do_clear()
    fsm_irq()
                                    fsm_io_request()
    vfio_ccw_sch_io_todo()
                                    fsm_io_helper()

Since the FSM state and CP should be kept in sync, let's make a
note when the CP is released, and rely on that as an indication
that the FSM should also be reset at the end of this routine and
open up the device for more work.

Signed-off-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210511195631.3995081-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio-ccw: Reset FSM state to IDLE inside FSM

[ Upstream commit 6c02ac4c9211edabe17bda437ac97e578756f31b ]

When an I/O request is made, the fsm_io_request() routine
moves the FSM state from IDLE to CP_PROCESSING, and then
fsm_io_helper() moves it to CP_PENDING if the START SUBCHANNEL
received a cc0. Yet, the error case to go from CP_PROCESSING
back to IDLE is done after the FSM call returns.

Let's move this up into the FSM proper, to provide some
better symmetry when unwinding in this case.

Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20210511195631.3995081-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bytcr_rt5640: Add quirk for the Lenovo Miix 3-830 tablet

[ Upstream commit f0353e1f53f92f7b3da91e6669f5d58ee222ebe8 ]

The Lenovo Miix 3-830 tablet has only 1 speaker, has an internal analog
mic on IN1 and uses JD2 for jack-detect, add a quirk to automatically
apply these settings on Lenovo Miix 3-830 tablets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210508150146.28403-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: bytcr_rt5640: Add quirk for the Glavey TM800A550L tablet

[ Upstream commit 28c268d3acdd4cbcd2ac320b85609e77f84e74a7 ]

Add a quirk for the Glavey TM800A550L tablet, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210508150146.28403-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: cdns3: Fix runtime PM imbalance on error

[ Upstream commit 07adc0225484fc199e3dc15ec889f75f498c4fca ]

When cdns3_gadget_start() fails, a pairing PM usage counter
decrement is needed to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20210412054908.7975-1-dinghao.liu@zju.edu.cn
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/nfc/rawsock.c: fix a permission check bug

[ Upstream commit 8ab78863e9eff11910e1ac8bcf478060c29b379e ]

The function rawsock_create() calls a privileged function sk_alloc(), which requires a ns-aware check to check net->user_ns, i.e., ns_capable(). However, the original code checks the init_user_ns using capable(). So we replace the capable() with ns_capable().

Signed-off-by: Jeimon <jjjinmeng.zhou@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Forbid trampoline attach for functions with variable arguments

[ Upstream commit 31379397dcc364a59ce764fabb131b645c43e340 ]

We can't currently allow to attach functions with variable arguments.
The problem is that we should save all the registers for arguments,
which is probably doable, but if caller uses more than 6 arguments,
we need stack data, which will be wrong, because of the extra stack
frame we do in bpf trampoline, so we could crash.

Also currently there's malformed trampoline code generated for such
functions at the moment as described in:

  https://lore.kernel.org/bpf/20210429212834.82621-1-jolsa@kernel.org/

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210505132529.401047-1-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-zynq-qspi: Fix stack violation bug

[ Upstream commit 6d5ff8e632a4f2389c331e5554cd1c2a9a28c7aa ]

When the number of bytes for the op is greater than one, the read could
run off the end of the function stack and cause a crash.

This patch restores the behaviour of safely reading out of the original
opcode location.

Signed-off-by: Karen Dombroski <karen.dombroski@marsbioimaging.com>
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Link: https://lore.kernel.org/r/20210429053802.17650-3-amit.kumar-mahapatra@xilinx.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: Fix spi device unregister flow

[ Upstream commit c7299fea67696db5bd09d924d1f1080d894f92ef ]

When an SPI device is unregistered, the spi->controller->cleanup() is
called in the device's release callback. That's wrong for a couple of
reasons:

1. spi_dev_put() can be called before spi_add_device() is called. And
   it's spi_add_device() that calls spi_setup(). This will cause clean()
   to get called without the spi device ever being setup.

2. There's no guarantee that the controller's driver would be present by
   the time the spi device's release function gets called.

3. It also causes "sleeping in atomic context" stack dump[1] when device
   link deletion code does a put_device() on the spi device.

Fix these issues by simply moving the cleanup from the device release
callback to the actual spi_unregister_device() function.

[1] - https://lore.kernel.org/lkml/CAHp75Vc=FCGcUyS0v6fnxme2YJ+qD+Y-hQDQLa2JhWNON9VmsQ@mail.gmail.com/

Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210426235638.1285530-1-saravanak@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: amd: fix for pcm_read() error

[ Upstream commit 6879e8e759bf9e05eaee85e32ca1a936e6b46da1 ]

Below phython script throwing pcm_read() error.

import subprocess

p = subprocess.Popen(["aplay -t raw -D plughw:1,0 /dev/zero"], shell=True)
subprocess.call(["arecord -Dhw:1,0 --dump-hw-params"], shell=True)
subprocess.call(["arecord -Dhw:1,0 -fdat -d1 /dev/null"], shell=True)
p.kill()

Handling ACP global external interrupt enable register
causing this issue.
This register got updated wrongly when there is active
stream causing interrupts disabled for active stream.
Refactored code to handle enabling and disabling external interrupts.

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/1619555017-29858-1-git-send-email-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: max98088: fix ni clock divider calculation

[ Upstream commit 6c9762a78c325107dc37d20ee21002b841679209 ]

The ni1/ni2 ratio formula [1] uses the pclk which is the prescaled mclk.
The max98088 datasheet [2] has no such formula but table-12 equals so
we can assume that it is the same for both devices.

While on it make use of DIV_ROUND_CLOSEST_ULL().

[1] https://datasheets.maximintegrated.com/en/ds/MAX98089.pdf; page 86
[2] https://datasheets.maximintegrated.com/en/ds/MAX98088.pdf; page 82

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20210423135402.32105-1-m.felsch@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

proc: Track /proc/$pid/attr/ opener mm_struct

commit 591a22c14d3f45cc38bd1931c593c221df2f1881 upstream.

Commit bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener")
tried to make sure that there could not be a confusion between the opener of
a /proc/$pid/attr/ file and the writer. It used struct cred to make sure
the privileges didn't change. However, there were existing cases where a more
privileged thread was passing the opened fd to a differently privileged thread
(during container setup). Instead, use mm_struct to track whether the opener
and writer are still the same process. (This is what several other proc files
already do, though for different reasons.)

Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Fixes: bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.43

Link: https://lore.kernel.org/r/20210608175942.377073879@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

neighbour: allow NUD_NOARP entries to be forced GCed

commit 7a6b1ab7475fd6478eeaf5c9d1163e7a18125c8f upstream.

IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to
fill up the neighbour table with enough entries that it will overflow for
valid connections after that.

This behaviour is more prevalent after commit 58956317c8de ("neighbor:
Improve garbage collection") is applied, as it prevents removal from
entries that are not NUD_FAILED, unless they are more than 5s old.

Fixes: 58956317c8de (neighbor: Improve garbage collection)
Reported-by: Kasper Dupont <kasperd@gjkwv.06.feb.2021.kasperd.net>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netback: take a reference to the RX task thread

commit 107866a8eb0b664675a260f1ba0655010fac1e08 upstream.

Do this in order to prevent the task from being freed if the thread
returns (which can be triggered by the frontend) before the call to
kthread_stop done as part of the backend tear down. Not taking the
reference will lead to a use-after-free in that scenario. Such
reference was taken before but dropped as part of the rework done in
2ac061ce97f4.

Reintroduce the reference taking and add a comment this time
explaining why it's needed.

This is XSA-374 / CVE-2021-28691.

Fixes: 2ac061ce97f4 ('xen/netback: cleanup init and deinit code')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: missing error reporting for not selected expressions

commit c781471d67a56d7d4c113669a11ede0463b5c719 upstream.

Sometimes users forget to turn on nftables extensions from Kconfig that
they need. In such case, the error reporting from userspace is
misleading:

 $ sudo nft add rule x y counter
 Error: Could not process rule: No such file or directory
 add rule x y counter
 ^^^^^^^^^^^^^^^^^^^^

Add missing NL_SET_BAD_ATTR() to provide a hint:

 $ nft add rule x y counter
 Error: Could not process rule: No such file or directory
 add rule x y counter
              ^^^^^^^

Fixes: 83d9dcba06c5 ("netfilter: nf_tables: extended netlink error reporting for expressions")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: qcom-geni: Suspend and resume the bus during SYSTEM_SLEEP_PM ops

commit 57648e860485de39c800a89f849fdd03c2d31d15 upstream.

Mark bus as suspended during system suspend to block the future
transfers. Implement geni_i2c_resume_noirq() to resume the bus.

Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>