drm/nouveau: Add support to control backlight using bl_power for nva3.

Summary:

* Add support to turn on/off backlight when changing values in bl_power
  file. This is achieved by using function backlight_get_brightness()
  in nva3_set_intensity to get current brightness.

Test plan:

* Turn off:
echo 1 > /sys/class/backlight/nv_backlight/bl_power

* Turn on:
echo 0 > /sys/class/backlight/nv_backlight/bl_power

Signed-off-by: Antonio Gomes <antoniospg100@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221104220424.41164-1-antoniospg100@gmail.com

drm/v3d: add missing mutex_destroy

v3d_perfmon_open_file() instantiates a mutex for a particular file
instance, but it never destroys it by calling mutex_destroy() in
v3d_perfmon_close_file().

Similarly, v3d_perfmon_create_ioctl() instantiates a mutex for a
particular perfmon, but it never destroys it by calling mutex_destroy()
in v3d_perfmon_destroy_ioctl().

So, add the missing mutex_destroy on both cases.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108175425.39819-3-mcanal@igalia.com

drm/v3d: switch to drmm_mutex_init

mutex_init is supposed to be balanced by a call to mutex_destroy, but
this is not currently happening on the v3d driver.

Considering the introduction of a DRM-managed mutex_init variant, switch
to the drmm_mutex_init.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108175425.39819-2-mcanal@igalia.com

drm: panel: Add Jadard JD9365DA-H3 DSI panel

Jadard JD9365DA-H3 is WXGA MIPI DSI panel and it support TFT
dot matrix LCD with 800RGBx1280 dots at maximum.

Add support for it.

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108173120.618312-4-jagan@edgeble.ai

dt-bindings: display: Document Jadard JD9365DA-H3 DSI panel

Jadard JD9365DA-H3 is WXGA MIPI DSI panel and it support TFT
dot matrix LCD with 800RGBx1280 dots at maximum.

Document it.

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108173120.618312-3-jagan@edgeble.ai

dt-bindings: vendor-prefixes: Document Jadard

Jadard Technology Inc. manufactures and distributes chips
from Shenzhen.

Add vendor prefix for it.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108173120.618312-2-jagan@edgeble.ai

dt-bindings: vendor-prefixes: Document Chongzhou

Chongzhou is a professional is a manufacturer of LCD panels
from Shenzhen.

Add vendor prefix for it.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108173120.618312-1-jagan@edgeble.ai

drm: lcdif: Set and enable FIFO Panic threshold

In case the LCDIFv3 is used to drive a 4k panel via i.MX8MP HDMI bridge,
the LCDIFv3 becomes susceptible to FIFO underflows, these lead to nasty
flicker of the image on the panel, or image being shifted by half frame
horizontally every second frame. The flicker can be easily triggered by
running 3D application on top of weston compositor, like neverball or
chromium. Surprisingly glmark2-es2-wayland or glmark2-es2-drm does not
trigger this effect so easily.

Configure the FIFO Panic threshold register and enable the FIFO Panic
mode, which internally boosts the NoC interconnect priority for LCDIFv3
transactions in case of possible underflow. This mitigates the flicker
effect on 4k panels as well.

Fixes: 9db35bb349a0 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Liu Ying <victor.liu@nxp.com> # i.MX8mp EVK
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101152629.21768-1-marex@denx.de

MAINTAINERS: Update GPU Scheduler email

Update GPU Scheduler maintainer email.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/508985/

drm/gem: Implement shadow-plane {begin, end}_fb_access with vmap

Move the vmap code for shadow-plane helpers from prepare_fb to
begin_fb_access helpers. Vunmap is now performed at the end of
the current pageflip, instead of the end of the following pageflip.

Reduces the duration of the mapping from while the framebuffer is
being displayed to just the atomic commit. This is safe as outside
of the pageflip, nothing should access the mapped buffer memory.
Unmapping the framebuffer BO memory early allows to reduce address-
space consumption and possibly allows for evicting the memory pages.

The change is effectively a rename of prepare_fb and cleanup_fb
implementations, plus updates to the shadow-plane init macro. As
there's no longer a prepare_fb helper for shadow planes, atomic
helpers will call drm_gem_plane_helper_prepare_fb() automatically.

v2:
* fix typos in commit message (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025101737.8874-3-tzimmermann@suse.de

drm/atomic-helper: Add {begin,end}_fb_access to plane helpers

Add {begin,end}_fb_access helpers to run at the beginning and end of
an atomic commit. The begin_fb_access helper acquires resources that
are necessary to perform the atomic commit. It it similar to prepare_fb,
except that the resources are to be released at the end of the commit.
Resources acquired by prepare_fb are held until after the next pageflip.

The end_fb_access helper performs the corresponding resource cleanup.
Atomic helpers call it with the new plane state. This is different from
cleanup_fb, which releases resources of the old plane state.

v2:
* fix typos in commit message (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025101737.8874-2-tzimmermann@suse.de

drm/fb-helper: Document struct drm_fb_helper.hint_leak_smem_start

Document the new field smem_start in struct drm_fb_helper and avoid
a compile-time warning. An error message is shown below and the bug
report is at [1].

  include/drm/drm_fb_helper.h:204: warning: Function parameter or member 'hint_leak_smem_start' not described in 'drm_fb_helper'

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: e7c5c29a9eb1 ("drm/fb-helper: Set flag in struct drm_fb_helper for leaking physical addresses")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/dri-devel/20221107143858.0253a8ff@canb.auug.org.au/T/#u
Link: https://patchwork.freedesktop.org/patch/msgid/20221107125329.12842-4-tzimmermann@suse.de

drm/hisilicon/hibmc: Include <linux/io.h> for readl() and writel()

Include <linux/io.h> to get readl() and writel() on S390. The error
message is shown below and a bug report is at [1].

  drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_vdac.c:75:15: error: implicit declaration of function 'readl' [-Werror=implicit-function-declaration]
     75 |         reg = readl(priv->mmio + HIBMC_DISPLAY_CONTROL_HISILE);
        |               ^~~~~
  drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_vdac.c:80:9: error: implicit declaration of function 'writel' [-Werror=implicit-function-declaration]
     80 |         writel(reg, priv->mmio + HIBMC_DISPLAY_CONTROL_HISILE);
|         ^~~~~~

Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 45b64fd9f7ae ("drm/fb-helper: Remove unnecessary include statements")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/dri-devel/202211060608.qrTg8b2E-lkp@intel.com/T/#u
Link: https://patchwork.freedesktop.org/patch/msgid/20221107125329.12842-3-tzimmermann@suse.de

drm/fbdev: Include <linux/vmalloc.h>

Include <linux/vmalloc.h> in fbdev emulation to get vzalloc() and
vfree() on MIPS. The error messages are shown below and bug reports
are at [1] and [2].

  drivers/gpu/drm/drm_fbdev_generic.c: In function 'drm_fbdev_cleanup':
  drivers/gpu/drm/drm_fbdev_generic.c:63:17: error: implicit declaration of function 'vfree'; did you mean 'kvfree'? [-Werror=implicit-function-declaration]
     63 |                 vfree(shadow);
        |                 ^~~~~
        |                 kvfree
  drivers/gpu/drm/drm_fbdev_generic.c: In function 'drm_fbdev_fb_probe':
  drivers/gpu/drm/drm_fbdev_generic.c:219:38: error: implicit declaration of function 'vzalloc'; did you mean 'kvzalloc'? [-Werror=implicit-function-declaration]
    219 |                 fbi->screen_buffer = vzalloc(fbi->screen_size);
        |                                      ^~~~~~~
        |                                      kvzalloc
  drivers/gpu/drm/drm_fbdev_generic.c:219:36: warning: assignment to 'char *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
    219 |                 fbi->screen_buffer = vzalloc(fbi->screen_size);

Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 8ab59da26bc0 ("drm/fb-helper: Move generic fbdev emulation into separate source file")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/dri-devel/202211060911.5U76gMtE-lkp@intel.com/T/#u
Link: https://lore.kernel.org/dri-devel/202211060331.1SoD1tAR-lkp@intel.com/T/#u
Link: https://patchwork.freedesktop.org/patch/msgid/20221107125329.12842-2-tzimmermann@suse.de

drm/fb-helper: Fix missing kerneldoc include

This was lost in the code movement done in commit 8ab59da26bc0
("drm/fb-helper: Move generic fbdev emulation into separate source
file").

Fixes: 8ab59da26bc0 ("drm/fb-helper: Move generic fbdev emulation into separate source file")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107190928.1212116-1-daniel.vetter@ffwll.ch

drm/ttm: optimize pool allocations a bit v2

If we got a page pool use it as much as possible.

If we can't get more pages from the pool allocate as much as possible.

Only if that still doesn't work reduce the order and try again.

v2: minor cleanups

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107195808.1873-1-christian.koenig@amd.com

drm/arm/hdlcd: remove calls to drm_mode_config_cleanup()

drm_mode_config_init() simply calls drmm_mode_config_init(), hence
cleanup is automatically handled through registering
drm_mode_config_cleanup() with drmm_add_action_or_reset().

While at it, get rid of the deprecated drm_mode_config_init() and
replace it with drmm_mode_config_init() directly.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026153431.72033-5-dakr@redhat.com

drm/arm/hdlcd: plane: use drm managed resources

Use drm managed resource allocation (drmm_universal_plane_alloc()) in
order to get rid of the explicit destroy hook in struct drm_plane_funcs.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026153431.72033-4-dakr@redhat.com

drm/arm/hdlcd: replace drm->dev_private with drm_to_hdlcd_priv()

Using drm_device->dev_private is deprecated. Since we've switched to
devm_drm_dev_alloc(), struct drm_device is now embedded in struct
hdlcd_drm_private, hence we can use container_of() to get the struct
drm_device instance instead.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026153431.72033-3-dakr@redhat.com

drm/arm/hdlcd: use drmm_* to allocate driver structures

Use drm managed resources to allocate driver structures and get rid of
the deprecated drm_dev_alloc() call and replace it with
devm_drm_dev_alloc().

This also serves as preparation to get rid of drm_device->dev_private
and to fix use-after-free issues on driver unload.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026153431.72033-2-dakr@redhat.com

drm/sun4i: dsi: Add the A100 variant

The A100 variant of the MIPI DSI controller now gets its module clock
from the TCON via the TCON TOP, so the clock rate cannot be set to a
fixed value. Otherwise, it appears to be the same as the A31 variant.

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221107053552.2330-5-samuel@sholland.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/sun4i: dsi: Add a variant structure

Replace the ad-hoc calls to of_device_is_compatible() with a structure
describing the differences between variants. This is in preparation for
adding more variants to the driver.

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221107053552.2330-4-samuel@sholland.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

dt-bindings: display: sun6i-dsi: Add the A100 variant

The "40nm" MIPI DSI controller found in the A100 and D1 SoCs has the
same register layout as previous SoC integrations. However, its module
clock now comes from the TCON, which means it no longer runs at a fixed
rate, so this needs to be distinguished in the driver.

The controller also now uses pins on Port D instead of dedicated pins,
so it drops the separate power domain.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221107053552.2330-3-samuel@sholland.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

dt-bindings: display: sun6i-dsi: Fix clock conditional

The A64 case should have limited maxItems, instead of duplicating the
minItems value from the main binding. While here, simplify the binding
by making this an "else" case of the two-clock conditional block.

Fixes: fe5040f2843a ("dt-bindings: sun6i-dsi: Document A64 MIPI-DSI controller")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221107053552.2330-2-samuel@sholland.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/fb-helper: Clarify use of last_close and output_poll_changed

Clarify documentation in the use of struct drm_driver.last_close and
struct drm_mode_config_funcs.output_poll_changed. Those callbacks should
not be said for fbdev implementations on top of struct drm_client_funcs.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-24-tzimmermann@suse.de

drm/fb-helper: Remove unnecessary include statements

Remove include statements for <drm/drm_fb_helper.h> where it is not
required (i.e., most of them). In a few places include other header
files that are required by the source code.

v3:
* fix amdgpu include statements
* fix rockchip include statements

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-23-tzimmermann@suse.de

drm/fb-helper: Move generic fbdev emulation into separate source file

Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.

v3:
* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
* rebase onto vmwgfx changes
* rebase onto xlnx changes
* fix include statements in amdgpu

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de

drm/fb-helper: Set flag in struct drm_fb_helper for leaking physical addresses

Uncouple the parameter drm_leak_fbdev_smem from the implementation by
setting a flag in struct drm_fb_helper. This will help to move the
generic fbdev emulation into its own source file, while keeping the
parameter in drm_fb_helper.c. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-21-tzimmermann@suse.de

drm/fb-helper: Always initialize generic fbdev emulation

Initialize the generic fbdev emulation even if it has been disabled
on the kernel command line. The hotplug and mode initialization will
fail accordingly.

The kernel parameter can still be changed at runtime and the emulation
will initialize after hotplugging the connector.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-20-tzimmermann@suse.de

drm/fb_helper: Minimize damage-helper overhead

Pull the test for fb_dirty into the caller to avoid extra work
if no callback has been set. In this case no damage handling is
required and no damage area needs to be computed. Print a warning
if the damage worker runs without getting an fb_dirty callback.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-19-tzimmermann@suse.de

drm/fb-helper: Perform all fbdev I/O with the same implementation

Implement the fbdev's read/write helpers with the same functions. Use
the generic fbdev's code as template. Convert all drivers.

DRM's fb helpers must implement regular I/O functionality in struct
fb_ops and possibly perform a damage update. Handle all this in the
same functions and convert drivers. The functionality has been used
as part of the generic fbdev code for some time. The drivers don't
set struct drm_fb_helper.fb_dirty, so they will not be affected by
damage handling.

For I/O memory, fb helpers now provide drm_fb_helper_cfb_read() and
drm_fb_helper_cfb_write(). Several drivers require these. Until now
tegra used I/O read and write, although the memory buffer appears to
be in system memory. So use _sys_ helpers now.

v3:
* fix docs (Javier)
v2:
* rebase onto vmwgfx changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-18-tzimmermann@suse.de

drm/fb-helper: Call fb_sync in I/O functions

Call struct fb_ops.fb_sync in drm_fbdev_{read,write}() to mimic the
behavior of fbdev. Fbdev implementations of fb_read and fb_write in
struct fb_ops invoke fb_sync to synchronize with outstanding operations
before I/O. Doing the same in DRM implementations will allow us to use
them throughout DRM drivers.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-17-tzimmermann@suse.de

drm/fb-helper: Disconnect damage worker from update logic

The fbdev helpers implement a damage worker that forwards fbdev
updates to the DRM driver. The worker's update logic depends on
the generic fbdev emulation. Separate the two via function pointer.

The generic fbdev emulation sets struct drm_fb_helper_funcs.fb_dirty,
a new callback that hides the update logic from the damage worker.
It's not possible to use the generic logic with other fbdev emulation,
because it contains additional code for the shadow buffering that
the generic emulation employs.

DRM drivers with internal fbdev emulation can set fb_dirty to their
own implementation if they require damage handling; although no such
drivers currently exist.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-16-tzimmermann@suse.de

drm/fb-helper: Rename drm_fb_helper_unregister_fbi() to use _info postfix

Rename drm_fb_helper_unregister_fbi() to drm_fb_helper_unregister_info()
as part of unifying the naming within fbdev helpers. Adapt drivers. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-15-tzimmermann@suse.de

drm/fb-helper: Rename drm_fb_helper_alloc_fbi() to use _info postfix

Rename drm_fb_helper_alloc_fbi() to drm_fb_helper_alloc_info() as
part of unifying the naming within fbdev helpers. Adapt drivers. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-14-tzimmermann@suse.de

drm/fb_helper: Rename field fbdev to info in struct drm_fb_helper

Rename struct drm_fb_helper.fbdev to info. The current name is
misleading as it overlaps with generic fbdev naming conventions.
Adapt to the usual naming in fbdev drivers by calling the field
'info'. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-13-tzimmermann@suse.de

drm/fb-helper: Cleanup include statements in header file

Only include what we have to.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-12-tzimmermann@suse.de

drm/tve200: Include <linux/of.h>

Include <linux/of.h> for of_match_ptr().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-11-tzimmermann@suse.de

drm/panel-ili9341: Include <linux/backlight.h>

Include <linux/backlight.h> for devm_of_find_backlight().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-10-tzimmermann@suse.de

drm/rockchip: Don't set struct drm_driver.output_poll_changed

Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as rockchip uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.

v2:
* fix commit description (Christian)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-9-tzimmermann@suse.de

drm/logicvc: Don't set struct drm_driver.output_poll_changed

Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as logicvc uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.

v2:
* fix commit description (Christian)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-8-tzimmermann@suse.de

drm/ingenic: Don't set struct drm_driver.output_poll_changed

Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as ingenic uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.

v2:
* fix commit description (Christian, Sergey)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-7-tzimmermann@suse.de

drm/imx/dcss: Don't set struct drm_driver.output_poll_changed

Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as DCSS uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.

v2:
* fix commit description (Christian)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-6-tzimmermann@suse.de

drm/amdgpu: Don't set struct drm_driver.output_poll_changed

Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as amdgpu uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.

v2:
* fix commit description (Christian)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-5-tzimmermann@suse.de

drm/vboxvideo: Don't set struct drm_driver.lastclose

Don't set struct drm_driver.lastclose. It's used to restore the
fbdev console. But as vboxvideo uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See
the call to drm_client_dev_restore() in drm_lastclose().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-4-tzimmermann@suse.de

drm/mcde: Don't set struct drm_driver.lastclose

Don't set struct drm_driver.lastclose. It's used to restore the
fbdev console. But as mcde uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See
the call to drm_client_dev_restore() in drm_lastclose().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-3-tzimmermann@suse.de

drm/komeda: Don't set struct drm_driver.lastclose

Don't set struct drm_driver.lastclose. It's used to restore the
fbdev console. But as komeda uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See
the call to drm_client_dev_restore() in drm_lastclose().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-2-tzimmermann@suse.de

Merge drm/drm-next into drm-misc-next

Backmerging drm/drm-next to get the latest changes in the xlnx driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm/ofdrm: Cast error pointers to void __iomem *

Cast error pointers when returning them as void __iomem *. Fixes
a number of Sparse warnings, such as the ones shown below.

../drivers/gpu/drm/tiny/ofdrm.c:439:31: warning: incorrect type in return expression (different address spaces)
../drivers/gpu/drm/tiny/ofdrm.c:439:31:    expected void [noderef] __iomem *
../drivers/gpu/drm/tiny/ofdrm.c:439:31:    got void *
../drivers/gpu/drm/tiny/ofdrm.c:442:31: warning: incorrect type in return expression (different address spaces)
../drivers/gpu/drm/tiny/ofdrm.c:442:31:    expected void [noderef] __iomem *
../drivers/gpu/drm/tiny/ofdrm.c:442:31:    got void *

See [1] for the bug report.

v3:
* use IOMEM_ERR_PTR() (Javier)

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/dri-devel/202210200016.yiQzPIy0-lkp@intel.com/
Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-3-tzimmermann@suse.de

drm/ofdrm: Convert PCI IDs to CPU endianness for comparing

Properties of 32-bit integers are returned from the OF device tree
as type __be32. Convert PCI vendor and device IDs from __be32 to host
endianness before comparing them to constants. All relevant machines
are old, big-endian Macintosh systems; hence the bug never happened
in practice.

Fixes sparse warnings shown below.

  drivers/gpu/drm/tiny/ofdrm.c:237:17: warning: restricted __be32 degrades to integer
  drivers/gpu/drm/tiny/ofdrm.c:238:18: warning: restricted __be32 degrades to integer
  drivers/gpu/drm/tiny/ofdrm.c:238:54: warning: restricted __be32 degrades to integer

See [1] for the bug report.

v2:
* convert endianness (Alex)

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/dri-devel/202210192208.D888I6X7-lkp@intel.com/
Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-2-tzimmermann@suse.de

drm/ingenic: Fix missing platform_driver_unregister() call in ingenic_drm_init()

A problem about modprobe ingenic-drm failed is triggered with the following
log given:

 [  303.561088] Error: Driver 'ingenic-ipu' is already registered, aborting...
 modprobe: ERROR: could not insert 'ingenic_drm': Device or resource busy

The reason is that ingenic_drm_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without unregistering ingenic_ipu_driver_ptr, resulting
the ingenic-drm can never be installed later.
A simple call graph is shown as below:

 ingenic_drm_init()
   platform_driver_register() # ingenic_ipu_driver_ptr are registered
   platform_driver_register()
     driver_register()
       bus_add_driver()
         priv = kzalloc(...) # OOM happened
   # return without unregister ingenic_ipu_driver_ptr

Fixing this problem by checking the return value of
platform_driver_register() and do platform_unregister_drivers() if
error happened.

Fixes: fc1acf317b01 ("drm/ingenic: Add support for the IPU")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221104064512.8569-1-yuancan@huawei.com

Merge tag 'drm-intel-gt-next-2022-11-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Driver Changes:

- Fix for #7306: [Arc A380] white flickering when using arc as a
  secondary gpu (Matt A)
- Add Wa_18017747507 for DG2 (Wayne)
- Avoid spurious WARN on DG1 due to incorrect cache_dirty flag
  (Niranjana, Matt A)
- Corrections to CS timestamp support for Gen5 and earlier (Ville)

- Fix a build error used with clang compiler on hwmon (GG)
- Improvements to LMEM handling with RPM (Anshuman, Matt A)
- Cleanups in dmabuf code (Mike)

- Selftest improvements (Matt A)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2N11wu175p6qeEN@jlahtine-mobl.ger.corp.intel.com

Merge tag 'drm-misc-next-2022-11-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 6.2:

UAPI Changes:

Cross-subsystem Changes:
- dma-buf: locking improvements
- firmware: New API in the RaspberryPi firmware driver used by vc4

Core Changes:
- client: Null pointer dereference fix in drm_client_buffer_delete()
- mm/buddy: Add back random seed log
- ttm: Convert ttm_resource to use size_t for its size, fix for an
  undefined behaviour

Driver Changes:
- bridge:
  - adv7511: use dev_err_probe
  - it6505: Fix return value check of pm_runtime_get_sync
- panel:
  - sitronix: Fixes and clean-ups
- lcdif: Increase DMA burst size
- rockchip: runtime_pm improvements
- vc4: Fix for a regression preventing the use of 4k @ 60Hz, and
  further HDMI rate constraints check.
- vmwgfx: Cursor improvements

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103083437.ksrh3hcdvxaof62l@houat

drm/scheduler: rename dependency callback into prepare_job

This now matches much better what this is doing.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-14-christian.koenig@amd.com

drm/scheduler: rework entity flush, kill and fini

This was buggy because when we had to wait for entities which were
killed as well we would just deadlock.

Instead move all the dependency handling into the callbacks so that
will all happen asynchronously.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-13-christian.koenig@amd.com

drm/scheduler: remove drm_sched_dependency_optimized

Not used any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-12-christian.koenig@amd.com

drm/amdgpu: use scheduler dependencies for CS

Entirely remove the sync obj in the job.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-11-christian.koenig@amd.com

drm/amdgpu: use scheduler dependencies for UVD msgs

Instead of putting that into the job sync object.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-10-christian.koenig@amd.com

drm/amdgpu: use scheduler dependencies for VM updates

Instead of putting that into the job sync object.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-9-christian.koenig@amd.com

drm/amdgpu: move explicit sync check into the CS

This moves the memory allocation out of the critical code path.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-8-christian.koenig@amd.com

drm/amdgpu: cleanup scheduler job initialization v2

Init the DRM scheduler base class while allocating the job.

This makes the whole handling much more cleaner.

v2: fix coding style

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-7-christian.koenig@amd.com

drm/amdgpu: drop amdgpu_sync from amdgpu_vmid_grab v2

Instead return the fence directly. Avoids memory allocation to store the
fence.

v2: cleanup coding style as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-6-christian.koenig@amd.com

drm/amdgpu: drop the fence argument from amdgpu_vmid_grab

This is always the job anyway.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-5-christian.koenig@amd.com

drm/amdgpu: use drm_sched_job_add_resv_dependencies for moves

Use the new common scheduler functions to figure out what to wait for.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-4-christian.koenig@amd.com

drm/scheduler: add drm_sched_job_add_resv_dependencies

Add a new function to update job dependencies from a resv obj.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-3-christian.koenig@amd.com

drm/ofdrm: Depend on CONFIG_MMU

Add a dependency on CONFIG_MMU to ofdrm. The driver uses GEM SHMEM
helpers, which require MMU support. A reported error message [1] is
shown below.

   arm-linux-gnueabi-ld: drivers/gpu/drm/drm_gem_shmem_helper.o: in function `drm_gem_shmem_fault':
   >> drivers/gpu/drm/drm_gem_shmem_helper.c:562: undefined reference to `vmf_insert_pfn'

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: c8a17756c425 ("drm/ofdrm: Add ofdrm for Open Firmware framebuffers")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/dri-devel/202210192029.ZFeJvqjv-lkp@intel.com/
Link: https://patchwork.freedesktop.org/patch/msgid/20221101104049.15601-1-tzimmermann@suse.de

drm/meson: Fix return type of meson_encoder_cvbs_mode_valid()

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/gpu/drm/meson/meson_encoder_cvbs.c:211:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_bridge *, const struct drm_display_info *, const struct drm_display_mode *)' with an expression of type 'int (struct drm_bridge *, const struct drm_display_info *, const struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .mode_valid = meson_encoder_cvbs_mode_valid,
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1 error generated.

->mode_valid() in 'struct drm_bridge_funcs' expects a return type of
'enum drm_mode_status', not 'int'. Adjust the return type of
meson_encoder_cvbs_mode_valid() to match the prototype's to resolve the
warning and CFI failure.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102155242.1927166-1-nathan@kernel.org

drm/i915/hwmon: Fix a build error used with clang compiler

Use REG_FIELD_PREP() and a constant value for hwm_field_scale_and_write()

If the first argument of FIELD_PREP() is not a compile-time constant value
or unsigned long long type, this routine of the __BF_FIELD_CHECK() macro
used internally by the FIELD_PREP() macro always returns false.

 BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) >      \
                  __bf_cast_unsigned(_reg, ~0ull),        \
                  _pfx "type of reg too small for mask"); \

And it returns a build error by the option among the clang
compilation options. [-Werror,-Wtautological-constant-out-of-range-compare]

Reported build error while using clang compiler:

drivers/gpu/drm/i915/i915_hwmon.c:115:16: error: result of comparison of
constant 18446744073709551615 with expression of type 'typeof (_Generic((field_msk),
char: (unsigned char)0, unsigned char: (unsigned char)0, signed char: (unsigned char)0,
unsigned short: (unsigned short)0, short: (unsigned short)0, unsigned int:
(unsigned int)0, int: (unsigned int)0, unsigned long: (unsigned long)0, long:
(unsigned long)0, unsigned long long: (unsigned long long)0, long long:
(unsigned long long)0, default: (field_msk)))' (aka 'unsigned int') is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
        bits_to_set = FIELD_PREP(field_msk, nval);
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/bitfield.h:114:3: note: expanded from macro 'FIELD_PREP'
                __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: ");    \
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/bitfield.h:71:53: note: expanded from macro '__BF_FIELD_CHECK'
                BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) >     \
                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
./include/linux/build_bug.h:39:58: note: expanded from macro 'BUILD_BUG_ON_MSG'
                                    ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
./include/linux/compiler_types.h:357:22: note: expanded from macro 'compiletime_assert'
        _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
        ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/compiler_types.h:345:23: note: expanded from macro '_compiletime_assert'
        __compiletime_assert(condition, msg, prefix, suffix)
        ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/compiler_types.h:337:9: note: expanded from macro '__compiletime_assert'
                if (!(condition))                                       \

v2: Use REG_FIELD_PREP() macro instead of FIELD_PREP() (Jani)

Fixes: 99f55efb7911 ("drm/i915/hwmon: Power PL1 limit and TDP setting")
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
[Joonas: Wrapped commit message error line length to be more reasonable]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221029044230.32128-1-gwan-gyeong.mun@intel.com

drm/i915: Do not set cache_dirty for DGFX

Currently on DG1, which does not have LLC, we hit the below
warning while rebinding an userptr invalidated object.

WARNING: CPU: 4 PID: 13008 at drivers/gpu/drm/i915/gem/i915_gem_pages.c:34 __i915_gem_object_set_pages+0x296/0x2d0 [i915]
...
RIP: 0010:__i915_gem_object_set_pages+0x296/0x2d0 [i915]
...
Call Trace:
 <TASK>
 i915_gem_userptr_get_pages+0x175/0x1a0 [i915]
 ____i915_gem_object_get_pages+0x32/0xb0 [i915]
 i915_gem_object_userptr_submit_init+0x286/0x470 [i915]
 eb_lookup_vmas+0x2ff/0xcf0 [i915]
 ? __intel_wakeref_get_first+0x55/0xb0 [i915]
 i915_gem_do_execbuffer+0x785/0x21d0 [i915]
 i915_gem_execbuffer2_ioctl+0xe7/0x3d0 [i915]

We shouldn't be setting the obj->cache_dirty for DGFX,
fix it.

Fixes: d70af57944a1 ("drm/i915/shmem: ensure flush during swap-in on non-LLC")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reported-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102051416.27327-1-niranjana.vishwanathapura@intel.com

drm/tests: Add back seed value information

As reported by Michał, the drm_mm and drm_buddy unit tests lost the
printk with seed value after they were refactored into KUnit.

Add kunit_info with seed value information to assure reproducibility.

Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028221755.340487-1-arthurgrillo@riseup.net

drm/client: Prevent NULL dereference in drm_client_buffer_delete()

The drm_gem_vunmap() will crash with a NULL dereference if the passed
object pointer is NULL. It wasn't a problem before we added the locking
support to drm_gem_vunmap function because the mapping argument was always
NULL together with the object. Make drm_client_buffer_delete() to check
whether GEM is NULL before trying to unmap the GEM, it will happen on
framebuffer creation error.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/dri-devel/Y1kFEGxT8MVlf32V@kili/
Fixes: 79e2cf2e7a19 ("drm/gem: Take reservation lock for vmap/vunmap operations")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221030154412.8320-3-dmitry.osipenko@collabora.com

dma-buf: Make locking consistent in dma_buf_detach()

The dma_buf_detach() locks attach->dmabuf->resv and then unlocks
dmabuf->resv, which could be a two different locks from a static
code checker perspective. In particular this triggers Smatch to
report the "double unlock" error. Make the locking pointers consistent.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/dri-devel/Y1fLfsccW3AS%2Fo+%2F@kili/
Fixes: 809d9c72c2f8 ("dma-buf: Move dma_buf_attach() to dynamic locking specification")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221030154412.8320-2-dmitry.osipenko@collabora.com

drm/ttm: fix undefined behavior in bit shift for TTM_TT_FLAG_PRIV_POPULATED

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in ./include/drm/ttm/ttm_tt.h:122:26
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
 <TASK>
 dump_stack_lvl+0x7d/0xa5
 dump_stack+0x15/0x1b
 ubsan_epilogue+0xe/0x4e
 __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
 ttm_bo_move_memcpy+0x3b4/0x460 [ttm]
 bo_driver_move+0x32/0x40 [drm_vram_helper]
 ttm_bo_handle_move_mem+0x118/0x200 [ttm]
 ttm_bo_validate+0xfa/0x220 [ttm]
 drm_gem_vram_pin_locked+0x70/0x1b0 [drm_vram_helper]
 drm_gem_vram_pin+0x48/0xb0 [drm_vram_helper]
 drm_gem_vram_plane_helper_prepare_fb+0x53/0xe0 [drm_vram_helper]
 drm_gem_vram_simple_display_pipe_prepare_fb+0x26/0x30 [drm_vram_helper]
 drm_simple_kms_plane_prepare_fb+0x4d/0xe0 [drm_kms_helper]
 drm_atomic_helper_prepare_planes+0xda/0x210 [drm_kms_helper]
 drm_atomic_helper_commit+0xc3/0x1e0 [drm_kms_helper]
 drm_atomic_commit+0x9c/0x160 [drm]
 drm_client_modeset_commit_atomic+0x33a/0x380 [drm]
 drm_client_modeset_commit_locked+0x77/0x220 [drm]
 drm_client_modeset_commit+0x31/0x60 [drm]
 __drm_fb_helper_restore_fbdev_mode_unlocked+0xa7/0x170 [drm_kms_helper]
 drm_fb_helper_set_par+0x51/0x90 [drm_kms_helper]
 fbcon_init+0x316/0x790
 visual_init+0x113/0x1d0
 do_bind_con_driver+0x2a3/0x5c0
 do_take_over_console+0xa9/0x270
 do_fbcon_takeover+0xa1/0x170
 do_fb_registered+0x2a8/0x340
 fbcon_fb_registered+0x47/0xe0
 register_framebuffer+0x294/0x4a0
 __drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper]
 drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper]
 drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper]
 drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper]
 bochs_pci_probe+0x6ca/0x772 [bochs]
 local_pci_probe+0x4d/0xb0
 pci_device_probe+0x119/0x320
 really_probe+0x181/0x550
 __driver_probe_device+0xc6/0x220
 driver_probe_device+0x32/0x100
 __driver_attach+0x195/0x200
 bus_for_each_dev+0xbb/0x120
 driver_attach+0x27/0x30
 bus_add_driver+0x22e/0x2f0
 driver_register+0xa9/0x190
 __pci_register_driver+0x90/0xa0
 bochs_pci_driver_init+0x52/0x1000 [bochs]
 do_one_initcall+0x76/0x430
 do_init_module+0x61/0x28a
 load_module+0x1f82/0x2e50
 __do_sys_finit_module+0xf8/0x190
 __x64_sys_finit_module+0x23/0x30
 do_syscall_64+0x58/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
 </TASK>

Fixes: 3312be8f6fc8 ("drm/ttm: move populated state into page flags")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031113350.4180975-1-cuigaosheng1@huawei.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/i915/selftests: Run the perf MI_BB tests on gen4/5

Now that we know the ring timestamp frequency on gen4/5 we
can run the perf tests that depend on sampling the timestamp.

On g4x/ilk we must read the udw of the 64bit timestamp
register. Details in {g4x,gen5)_read_clock_frequency().

When executing the read via the CS i965 doesn't seem to need
the double read trick that CPU mmio reads need.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-7-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm/i915/selftests: Test RING_TIMESTAMP on gen4/5

Now that we actually know the cs timestamp frequency on gen4/5
let's run the corresponding test.

On g4x/ilk we must read the udw of the 64bit timestamp
register. Details in {g4x,gen5)_read_clock_frequency().

The one extra caveat is that on i965 (or at least CL, don't
recall if I ever tested on BW) we must read the register
twice to get an up to date value. For some unknown reason
the first read tends to return a stale value.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-6-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm/i915/selftests: Run MI_BB perf selftests on SNB

SNB does have the RING_TIMESTAMP register on the RCS engine.
Run the MI_BB perf tests on it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-5-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm/i915: Fix cs timestamp frequency for cl/bw

Despite what the spec says the TIMESTAMP register seems to
tick once every hrawclk (confirmed on i965gm and g35).

v2: Rebase

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-4-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm/i915: Stop claiming cs timestamp frquency on gen2/3

Gen2/3 have no TIMESTAMP registers to sample so no point in thinking
we have any frequency for it either.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-3-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm/i915: Fix cs timestamp frequency for ctg/elk/ilk

On ilk the UDW of TIMESTAMP increments every 1000 ns,
LDW is mbz. In order to represent that we'd need 52 bits,
but we only have 32 bits. Even worse most things want to
only deal with 32 bits of timestamp. So let's just set
up the timestamp frequency as if we only had the UDW.

On ctg/elk 63:20 of TIMESTAMP increments every 1/4 ns, 19:0
are mbz. To make life simpler let's ignore the LDW and set up
timestamp frequency based on the UDW only (increments every
1024 ns).

v2: Rebase

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031135703.14670-2-ville.syrjala@linux.intel.com
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure

In case mipi_dsi_attach() fails, call drm_panel_remove() to
avoid memory leak.

Fixes: 849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014231106.468063-1-marex@denx.de

drm/panel/panel-sitronix-st7701: Clean up CMDnBKx selection

There are two command register files, CMD1 and CMD2, where only the CMD2
contains additional register sub-files BK0..3 . Pull the register file
selection call into separate function instead of duplicating it all over
the driver. The CMD2BK2 file is undocumented in datasheet, and is used
for BIST. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014231042.468033-1-marex@denx.de

drm/i915/dg2: Introduce Wa_18017747507

WA 18017747507 applies to all DG2 skus.

BSpec: 56035, 46121, 68173

Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031131509.3411195-1-wayne.boyer@intel.com

drm/panel/panel-sitronix-st7701: Fix RTNI calculation

The RTNI field is multiplied by 16 and incremented by 512 before being
used as the minimum number of pixel clock per horizontal line, hence
it is necessary to subtract those 512 bytes from htotal and then divide
the result by 16 before writing the value into the RTNI field. Fix the
calculation.

Fixes: de2b4917843c ("drm/panel/panel-sitronix-st7701: Infer horizontal pixel count from TFT mode")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221012221159.88397-1-marex@denx.de

drm: lcdif: change burst size to 256B

If a axi bus master with a higher priority do a lot of memory access
FIFO underruns can be inspected. Increase the burst size to 256B to
avoid such underruns and to improve the memory access efficiency.

Fixes: 9db35bb349a0 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101164615.778299-1-m.felsch@pengutronix.de

Merge tag 'drm-intel-next-2022-10-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Hotplug code clean-up and organization (Jani, Gustavo)
- More VBT specific code clean-up, doc, organization,
  and improvements (Ville)
- More MTL enabling work (Matt, RK, Anusha, Jose)
- FBC related clean-ups and improvements (Ville)
- Removing unused sw_fence_await_reservation (Niranjana)
- Big chunch of display house clean-up (Ville)
- Many Watermark fixes and clean-ups (Ville)
- Fix device info for devices without display (Jani)
- Fix TC port PLLs after readout (Ville)
- DPLL ID clean-ups (Ville)
- Prep work for finishing (de)gamma readout (Ville)
- PSR fixes and improvements (Jouni, Jose)
- Reject excessive dotclocks early (Ville)
- DRRS related improvements (Ville)
- Simplify uncore register updates (Andrzej)
- Fix simulated GPU reset wrt. encoder HW readout (Imre)
- Add a ADL-P workaround (Jose)
- Fix clear mask in GEN7_MISCCPCTL update (Andrzej)
- Temporarily disable runtime_pm for discrete (Anshuman)
- Improve fbdev debugs (Nirmoy)
- Fix DP FRL link training status (Ankit)
- Other small display fixes (Ankit, Suraj)
- Allow panel fixed modes to have differing sync
  polarities (Ville)
- Clean up crtc state flag checks (Ville)
- Fix race conditions during DKL PHY accesses (Imre)
- Prep-work for cdclock squash and crawl modes (Anusha)
- ELD precompute and readout (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y1wd6ZJ8LdJpCfZL@intel.com

drm/vmwgfx: Cleanup the cursor snooping code

Cursor snooping depended on implicit size and format which made debugging
quite difficult. Make the code easier to following by making everything
explicit and instead of using magic numbers predefine all the
parameters the code depends on.

Also fixes incorrectly computed pitches for non-aligned cursor snoops.
Fix which has no practical effect because non-aligned cursor snoops
are not used by the X11 driver and Wayland cursors will go through
mob cursors, instead of surface dma's.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Michael Banack <banackm@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-2-zack@kde.org

drm/vmwgfx: Validate the box size for the snooped cursor

Invalid userspace dma surface copies could potentially overflow
the memcpy from the surface to the snooped image leading to crashes.
To fix it the dimensions of the copybox have to be validated
against the expected size of the snooped cursor.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 2ac863719e51 ("vmwgfx: Snoop DMA transfers with non-covering sizes")
Cc: <stable@vger.kernel.org> # v3.2+
Reviewed-by: Michael Banack <banackm@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-1-zack@kde.org

drm/i915/dmabuf: Use scatterlist for_each_sg API

Update open coded for loop to use the standard scatterlist
for_each_sg API.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-4-matthew.auld@intel.com

drm/i915/dmabuf: dmabuf cleanup

Some minor cleanup of some variables for consistency.

Normalize struct sg_table to sgt.
Normalize struct dma_buf_attachment to attach.
checkpatch issues sizeof(), !NULL updates.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-3-matthew.auld@intel.com

drm/i915/selftests: exercise GPU access from the importer

Using PAGE_SIZE here potentially hides issues so bump that to something
larger. This should also make it possible for iommu to coalesce entries
for us. With that in place verify we can write from the GPU using the
importers sg_table, followed by checking that our writes match when read
from the CPU side.

v2: Switch over to igt_gpu_fill_dw(), which looks to be more widely
supported than the migrate stuff (at least OOTB).

References: https://gitlab.freedesktop.org/drm/intel/-/issues/7306
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-2-matthew.auld@intel.com

drm/i915/dmabuf: fix sg_table handling in map_dma_buf

We need to iterate over the original entries here for the sg_table,
pulling out the struct page for each one, to be remapped. However
currently this incorrectly iterates over the final dma mapped entries,
which is likely just one gigantic sg entry if the iommu is enabled,
leading to us only mapping the first struct page (and any physically
contiguous pages following it), even if there is potentially lots more
data to follow.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7306
Fixes: 1286ff739773 ("i915: add dmabuf/prime buffer sharing support.")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: <stable@vger.kernel.org> # v3.5+
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028155029.494736-1-matthew.auld@intel.com

drm/i915/dgfx: Grab wakeref at i915_ttm_unmap_virtual

We had already grabbed the rpm wakeref at obj destruction path,
but it also required to grab the wakeref when object moves.
When i915_gem_object_release_mmap_offset() gets called by
i915_ttm_move_notify(), it will release the mmap offset without
grabbing the wakeref. We want to avoid that therefore,
grab the wakeref at i915_ttm_unmap_virtual() accordingly.

While doing that also changed the lmem_userfault_lock from
mutex to spinlock, as spinlock widely used for list.

Also changed if (obj->userfault_count) to
GEM_BUG_ON(!obj->userfault_count).

v2:
- Removed lmem_userfault_{list,lock} from intel_gt. [Matt Auld]

Fixes: ad74457a6b5a ("drm/i915/dgfx: Release mmap on rpm suspend")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221027092242.1476080-3-anshuman.gupta@intel.com

drm/i915: Encapsulate lmem rpm stuff in intel_runtime_pm

Runtime pm is not really per GT, therefore it make sense to
move lmem_userfault_list, lmem_userfault_lock and
userfault_wakeref from intel_gt to intel_runtime_pm structure,
which is embedded to i915.

No functional change.

v2:
- Fixes the code comment nit. [Matt Auld]

Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221027092242.1476080-2-anshuman.gupta@intel.com

drm/rockchip: lvds: fix PM usage counter unbalance in poweron

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
We fix it by replacing it with the newest pm_runtime_resume_and_get
to keep usage counter balanced.

Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Fixes: cca1705c3d89 ("drm/rockchip: lvds: Add PX30 support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922132107.105419-3-zhangqilong3@huawei.com

drm/rockchip: use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()

Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to avoid
device usage counter leak.

Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615062644.96837-1-yuancan@huawei.com

drm/rockchip: dsi: Remove the unused function dsi_update_bits()

The function dsi_update_bits() is defined in the dw-mipi-dsi-rockchip.c
file, but not called elsewhere, so delete this unused function.

drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:367:20: warning: unused function 'dsi_update_bits'.

https://bugzilla.openanolis.cn/show_bug.cgi?id=2414

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017084330.94117-1-jiapeng.chong@linux.alibaba.com

drm/rockchip: vop2: Register Esmart0-win0 as primary plane

Esmart0-win0 could serve as primary plane, so mark it as such. On
RK3568 this window will never be used as primary plane, because the
three windows at the beginning of the rk3568_vop_win_data[] array
will be used. On RK3566 however, two of the windows at the beginning
of the rk3568_vop_win_data[] array cannot not be used due to hardware
limitations, so without this patch we end up with CRTCs without primary
planes when multiple VPs are active.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926081643.304759-1-s.hauer@pengutronix.de

drm: rockchip: remove rockchip_drm_framebuffer_init() function

The function rockchip_drm_framebuffer_init() was in use
in the rockchip_drm_fbdev.c file, but that is now replaced
by a generic fbdev setup. Reduce the image size by
removing the rockchip_drm_framebuffer_init() and sub function
rockchip_fb_alloc() and cleanup the rockchip_drm_fb.h header file.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ebe91504-c5df-99e4-635f-832218584051@gmail.com

drm/i915/mtl: Add missing steering table terminators

The termination entries were missing for a couple of the recently-added
MTL steering tables.

Fixes: f32898c94a10 ("drm/i915/xelpg: Add multicast steering")
Fixes: a7ec65fc7e83 ("drm/i915/xelpmp: Add multicast steering for media GT")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028224022.964997-1-matthew.d.roper@intel.com

drm: bridge: adv7511: use dev_err_probe in probe function

adv7511 probe may need to be attempted multiple times before no
-EPROBE_DEFER is returned. Currently, every such probe results in
an error message:

[    4.534229] adv7511 1-003d: failed to find dsi host
[    4.580288] adv7511 1-003d: failed to find dsi host

This is misleading, as there is no error and probe deferral is normal
behavior. Fix this by using dev_err_probe that will suppress
-EPROBE_DEFER errors. While at it, we touch all dev_err in the probe
path. This makes the code more concise and included the error code
everywhere to aid user in debugging.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026125246.3188260-1-a.fatoum@pengutronix.de