review.tizen.org Git - platform/kernel/linux-rpi.git/log

coresight: funnel: Fix missing spin_lock_init()

The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.

This is detected by Coccinelle semantic patch.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Tested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191118185207.30441-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thunderbolt: Power cycle the router if NVM authentication fails

On zang's Dell XPS 13 9370 after Thunderbolt NVM firmware upgrade the
Thunderbolt controller did not come back as expected. Only after the
system was rebooted it became available again. It is not entirely clear
what happened but I suspect the new NVM firmware image authentication
failed for some reason. Regardless of this the router needs to be power
cycled if NVM authentication fails in order to get it fully functional
again.

This modifies the driver to issue a power cycle in case the NVM
authentication fails immediately when dma_port_flash_update_auth()
returns. We also need to call tb_switch_set_uuid() earlier to be able to
fetch possible NVM authentication failure when DMA port is added.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=205457
Reported-by: zang <dump@tzib.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: bus: add more client attributes to sysfs

Export more client attributes via sysfs that are usually obtained
upon connection. In some cases, for example a monitoring application
may wish to know the attributes without actually performing the connection.
Added attributes:
max number of connections, fixed address, max message length.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191116142136.17535-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: Document software sinks

Add documentation for the software sinks API of the MSU driver and the
msu-sink module in particular.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20191114064201.43089-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: Lose the protocol driver when dropping its reference

Commit c7fd62bc69d02 ("stm class: Introduce framing protocol drivers")
forgot to tear down the link between an stm device and its protocol
driver when policy is removed. This leads to an invalid pointer reference
if one tries to write to an stm device after the policy has been removed
and the protocol driver module unloaded, leading to the below splat:

> BUG: unable to handle page fault for address: ffffffffc0737068
> #PF: supervisor read access in kernel mode
> #PF: error_code(0x0000) - not-present page
> PGD 3d780f067 P4D 3d780f067 PUD 3d7811067 PMD 492781067 PTE 0
> Oops: 0000 [#1] SMP NOPTI
> CPU: 1 PID: 26122 Comm: cat Not tainted 5.4.0-rc5+ #1
> RIP: 0010:stm_output_free+0x40/0xc0 [stm_core]
> Call Trace:
>  stm_char_release+0x3e/0x70 [stm_core]
>  __fput+0xc6/0x260
>  ____fput+0xe/0x10
>  task_work_run+0x9d/0xc0
>  exit_to_usermode_loop+0x103/0x110
>  do_syscall_64+0x19d/0x1e0
>  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by tearing down the link from an stm device to its protocol
driver when the policy involving that driver is removed.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: c7fd62bc69d02 ("stm class: Introduce framing protocol drivers")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Ammy Yi <ammy.yi@intel.com>
CC: stable@vger.kernel.org # v4.20+
Link: https://lore.kernel.org/r/20191114064201.43089-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: Fix incompatible function behavior for RSU driver

The older versions of remote system update (RSU) firmware don't support
retry and notify features then the kernel module dies when it queries
the RSU retry counter or performs notify operation.

Update the Intel service layer and RSU drivers to be compatible with
all versions of RSU firmware.

Reported-by: Radu Barcau <radu.bacrau@intel.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1572884676-1385-1-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: rtsx: Add support for RTS5261

Add support for new chip rts5261.
In order to support rts5261, the definitions of some internal registers
and workflow have to be modified and are different from its predecessors.
So we need this patch to ensure RTS5261 can work.

Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Link: https://lore.kernel.org/r/1571645105-5028-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

w1: new driver. DS2430 chip

add support for ds2430, 1 page, 256bit (32bytes) eeprom
(family 0x14).

Tests done:

32 bytes dump:

x@y:~# hexdump -C -n 32 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  39 39 0a 00 00 36 0a ff  ff ff ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000020

34 bytes dump: 32 only displayed

x@y:~# hexdump -C -n 34 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  39 39 0a 00 00 36 0a ff  ff ff ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000020

pattern write:

x@y:~# echo 123456789 > /sys/bus/w1/devices/14-00000158556e/eeprom
x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  31 32 33 34 35 36 37 38  39 0a ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000020

specific address 1-byte write

x@y:~# dd if=/dev/zero of=/sys/bus/w1/devices/14-00000158556e/eeprom \
count=1 bs=1 seek=4
1+0 records in
1+0 records out
x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  31 32 33 34 00 36 37 38  39 0a ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000020

writing binary block

x@y:~# cat dump-128bytes.bin > /sys/bus/w1/devices/14-00000158556e/eeprom
cat: write error: File too large

x@y:~# cat dump-32bytes.bin > /sys/bus/w1/devices/14-00000158556e/eeprom
x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  10 0b 5b ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff 40
00000020

Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Link: https://lore.kernel.org/r/20191019204015.61474-1-angelo.dureghello@timesys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pcmcia: include cs_internal.h for missing declarations

Include cs_internal.h (and pcmcia/cistpl.h as required by
cs_internal.h) for the declearions of cb_alloc and cb_free
to silence the following sparse warnings;

drivers/pcmcia/cardbus.c:64:11: warning: symbol 'cb_alloc' was not declared. Should it be static?
drivers/pcmcia/cardbus.c:103:6: warning: symbol 'cb_free' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20191017114059.10989-1-ben.dooks@codethink.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pcmcia: include <pcmcia/ds.h> for pcmcia_parse_tuple

Include <pcmcia/ds.h> for pcmcia_parse_tuple declaration
to fix the following sparse warning:

drivers/pcmcia/cistpl.c:1287:5: warning: symbol 'pcmcia_parse_tuple' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20191017114447.20455-1-ben.dooks@codethink.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

w1: Fix documentation warning.

This patch fixes - warning: Function parameter or member 'of_match_table'
not described in 'w1_family'

Signed-off-by: Dhanuka Warusadura <csx@disroot.org>
Link: https://lore.kernel.org/r/20191028110744.6523-1-csx@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uio: fix irq init with dt support & irq not defined

This change also does a bit of a unification for the IRQ init code.

But the actual problem is that UIO_IRQ_NONE == 0, so for the DT case where
UIO_IRQ_NONE gets assigned to `uioinfo->irq`, a 2nd initialization will get
triggered (for the IRQ) and this one will exit via `goto bad1`.

As far as things seem to go, the only case where UIO_IRQ_NONE seems valid,
is when using a device-tree. The driver has some legacy support for old
platform_data structures. It looks like, for platform_data a non-existent
IRQ is an invalid case (or was considered an invalid case).
Which is why -ENXIO is treated only when a DT is used.

Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
Link: https://lore.kernel.org/r/20191105073212.16719-1-alexandru.ardelean@analog.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: Handle start==NULL in binder_update_page_range()

The old loop wouldn't stop when reaching `start` if `start==NULL`, instead
continuing backwards to index -1 and crashing.

Luckily you need to be highly privileged to map things at NULL, so it's not
a big problem.

Fix it by adjusting the loop so that the loop variable is always in bounds.

This patch is deliberately minimal to simplify backporting, but IMO this
function could use a refactor. The jump labels in the second loop body are
horrible (the error gotos should be jumping to free_range instead), and
both loops would look nicer if they just iterated upwards through indices.
And the up_read()+mmput() shouldn't be duplicated like that.

Cc: stable@vger.kernel.org
Fixes: 457b9a6f09f0 ("Staging: android: add binder driver")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191018205631.248274-3-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: Prevent repeated use of ->mmap() via NULL mapping

binder_alloc_mmap_handler() attempts to detect the use of ->mmap() on a
binder_proc whose binder_alloc has already been initialized by checking
whether alloc->buffer is non-zero.

Before commit 880211667b20 ("binder: remove kernel vm_area for buffer
space"), alloc->buffer was a kernel mapping address, which is always
non-zero, but since that commit, it is a userspace mapping address.

A sufficiently privileged user can map /dev/binder at NULL, tricking
binder_alloc_mmap_handler() into assuming that the binder_proc has not been
mapped yet. This leads to memory unsafety.
Luckily, no context on Android has such privileges, and on a typical Linux
desktop system, you need to be root to do that.

Fix it by using the mapping size instead of the mapping address to
distinguish the mapped case. A valid VMA can't have size zero.

Fixes: 880211667b20 ("binder: remove kernel vm_area for buffer space")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191018205631.248274-2-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: Fix race between mmap() and binder_alloc_print_pages()

binder_alloc_print_pages() iterates over
alloc->pages[0..alloc->buffer_size-1] under alloc->mutex.
binder_alloc_mmap_handler() writes alloc->pages and alloc->buffer_size
without holding that lock, and even writes them before the last bailout
point.

Unfortunately we can't take the alloc->mutex in the ->mmap() handler
because mmap_sem can be taken while alloc->mutex is held.
So instead, we have to locklessly check whether the binder_alloc has been
fully initialized with binder_alloc_get_vma(), like in
binder_alloc_new_buf_locked().

Fixes: 8ef4665aa129 ("android: binder: Add page usage in binder stats")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191018205631.248274-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parport: daisy: use new parport device model

Modify parport daisy driver to use the new parallel port device model.

Last attempt was '1aec4211204d ("parport: daisy: use new parport device
model")' which failed as daisy was also trying to load the low level
driver and that resulted in a deadlock.

Cc: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20191016144540.18810-4-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parport: load lowlevel driver if ports not found

Usually all the distro will load the parport low level driver as part
of their initialization. But we can get into a situation where all the
parallel port drivers are built as module and we unload all the modules
at a later time. Then if we just do "modprobe parport" it will only
load the parport module and will not load the low level driver which
will actually register the ports. So, check the bus if there is any
parport registered, if not, load the low level driver.

We can get into the above situation with all distro but only Suse has
setup the alias for "parport_lowlevel" and so it only works in Suse.
Users of Debian based distro will need to load the lowlevel module
manually.

Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20191016144540.18810-3-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parport: do not check portlist when using device-model

We do not need to maintain a list of ports when we are using the
device-model. The base layer is going to maintain the list for us and
we can get the list of ports just using bus_for_each_dev().

Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20191016144540.18810-2-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parport: daisy: avoid hardcoded name

The daisy device name is hardcoded, define it in the header file and
use it in the code.

Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20191016144540.18810-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lp: fix sparc64 LPSETTIMEOUT ioctl

The layout of struct timeval is different on sparc64 from
anything else, and the patch I did long ago failed to take
this into account.

Change it now to handle sparc64 user space correctly again.

Quite likely nobody cares about parallel ports on sparc64,
but there is no reason not to fix it.

Cc: stable@vger.kernel.org
Fixes: 9a450484089d ("lp: support 64-bit time_t user space")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191108203435.112759-7-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ppdev: fix PPGETTIME/PPSETTIME ioctls

Going through the uses of timeval in the user space API,
I noticed two bugs in ppdev that were introduced in the y2038
conversion:

* The range check was accidentally moved from ppsettime to
ppgettime

* On sparc64, the microseconds are in the other half of the
64-bit word.

Fix both, and mark the fix for stable backports.

Cc: stable@vger.kernel.org
Fixes: 3b9ab374a1e6 ("ppdev: convert to y2038 safe")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191108203435.112759-8-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.4-rc7 into char-misc-next

We need the char/misc driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4-rc7

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
"A set of fixes that have trickled in over the last couple of weeks:

   - MAINTAINER update for Cavium/Marvell ThunderX2

   - stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for
     CAN interfaces

   - i.MX fixes for voltage regulator GPIO mappings, fixes voltage
     scaling issues

   - More i.MX fixes for various issues on i.MX eval boards: interrupt
     storm due to u-boot leaving pins in new states, fixing power button
     config, a couple of compatible-string corrections.

   - Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets

   - A few documentation tweaks and a fix of a memory leak in the reset
     subsystem"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: update Cavium ThunderX2 maintainers
  ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1
  ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1
  ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c
  ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
  arm64: dts: zii-ultra: fix ARM regulator GPIO handle
  ARM: sunxi: Fix CPU powerdown on A83T
  ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend
  arm64: dts: imx8mn: fix compatible string for sdma
  arm64: dts: imx8mm: fix compatible string for sdma
  reset: fix reset_control_ops kerneldoc comment
  ARM: dts: imx6-logicpd: Re-enable SNVS power key
  soc: imx: gpc: fix initialiser format
  ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts
  arm64: dts: ls1028a: fix a compatible issue
  reset: fix reset_control_get_exclusive kerneldoc comment
  reset: fix reset_control_lookup kerneldoc comment
  reset: fix of_reset_control_get_count kerneldoc comment
  reset: fix of_reset_simple_xlate kerneldoc comment
  reset: Fix memory leak in reset_control_array_put()

Merge tag 'staging-5.4-rc7' of git://git./linux/kernel/git/gregkh/staging

Pull IIO fixes and staging driver from Greg KH:
"Here is a mix of a number of IIO driver fixes for 5.4-rc7, and a whole
  new staging driver.

  The IIO fixes resolve some reported issues, all are tiny.

  The staging driver addition is the vboxsf filesystem, which is the
  VirtualBox guest shared folder code. Hans has been trying to get
  filesystem reviewers to review the code for many months now, and
  Christoph finally said to just merge it in staging now as it is
  stand-alone and the filesystem people can review it easier over time
  that way.

  I know it's late for this big of an addition, but it is stand-alone.

  The code has been in linux-next for a while, long enough to pick up a
  few tiny fixes for it already so people are looking at it.

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: Fix error return code in vboxsf_fill_super()
  staging: vboxsf: fix dereference of pointer dentry before it is null checked
  staging: vboxsf: Remove unused including <linux/version.h>
  staging: Add VirtualBox guest shared folder (vboxsf) support
  iio: adc: stm32-adc: fix stopping dma
  iio: imu: inv_mpu6050: fix no data on MPU6050
  iio: srf04: fix wrong limitation in distance measuring
  iio: imu: adis16480: make sure provided frequency is positive

Merge tag 'char-misc-5.4-rc7' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are a number of late-arrival driver fixes for issues reported for
  some char/misc drivers for 5.4-rc7

  These all come from the different subsystem/driver maintainers as
  things that they had reports for and wanted to see fixed.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  intel_th: pci: Add Jasper Lake PCH support
  intel_th: pci: Add Comet Lake PCH support
  intel_th: msu: Fix possible memory leak in mode_store()
  intel_th: msu: Fix overflow in shift of an unsigned int
  intel_th: msu: Fix missing allocation failure check on a kstrndup
  intel_th: msu: Fix an uninitialized mutex
  intel_th: gth: Fix the window switching sequence
  soundwire: slave: fix scanf format
  soundwire: intel: fix intel_register_dai PDI offsets and numbers
  interconnect: Add locking in icc_set_tag()
  interconnect: qcom: Fix icc_onecell_data allocation
  soundwire: depend on ACPI || OF
  soundwire: depend on ACPI
  thunderbolt: Drop unnecessary read when writing LC command in Ice Lake
  thunderbolt: Fix lockdep circular locking depedency warning
  thunderbolt: Read DP IN adapter first two dwords in one go

Merge tag 'configfs-for-5.4-2' of git://git.infradead.org/users/hch/configfs

Pull configfs regression fix from Christoph Hellwig:
"Fix a regression from this merge window in the configfs symlink
handling (Honggang Li)"

* tag 'configfs-for-5.4-2' of git://git.infradead.org/users/hch/configfs:
configfs: calculate the depth of parent item

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
"A small set of fixes for x86:

   - Make the tsc=reliable/nowatchdog command line parameter work again.
     It was broken with the introduction of the early TSC clocksource.

   - Prevent the evaluation of exception stacks before they are set up.
     This causes a crash in dumpstack because the stack walk termination
     gets screwed up.

   - Prevent a NULL pointer dereference in the rescource control file
     system.

   - Avoid bogus warnings about APIC id mismatch related to the LDR
     which can happen when the LDR is not in use and therefore not
     initialized. Only evaluate that when the APIC is in logical
     destination mode"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Respect tsc command line paraemeter for clocksource_tsc_early
  x86/dumpstack/64: Don't evaluate exception stacks before setup
  x86/apic/32: Avoid bogus LDR warnings
  x86/resctrl: Prevent NULL pointer dereference when reading mondata

Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
"A small set of fixes for timekeepoing and clocksource drivers:

   - VDSO data was updated conditional on the availability of a VDSO
     capable clocksource. This causes the VDSO functions which do not
     depend on a VDSO capable clocksource to operate on stale data.
     Always update unconditionally.

   - Prevent a double free in the mediatek driver

   - Use the proper helper in the sh_mtu2 driver so it won't attempt to
     initialize non-existing interrupts"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping/vsyscall: Update VDSO data unconditionally
  clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name()
  clocksource/drivers/mediatek: Fix error handling

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Thomas Gleixner:
"Two fixes for scheduler regressions:

   - Plug a subtle race condition which was introduced with the rework
     of the next task selection functionality. The change of task
     properties became unprotected which can be observed inconsistently
     causing state corruption.

   - A trivial compile fix for CONFIG_CGROUPS=n"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix pick_next_task() vs 'change' pattern race
  sched/core: Fix compilation error when cgroup not selected

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf tooling fixes from Thomas Gleixner:

- Fix the time sorting algorithm which was broken due to truncation of
   big numbers

- Fix the python script generator fail caused by a broken tracepoint
   array iterator

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fix time sorting
  perf tools: Remove unused trace_find_next_event()
  perf scripting engines: Iterate on tep event arrays directly

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fixlet from Thomas Gleixner:
"A trivial fix for a kernel doc regression where an argument change was
not reflected in the documentation"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentation

Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull stacktrace fix from Thomas Gleixner:
"A small fix for a stacktrace regression.

  Saving a stacktrace for a foreign task skipped an extra entry which
  makes e.g. the output of /proc/$PID/stack incomplete"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stacktrace: Don't skip first entry on noncurrent tasks

Merge tag '5.4-rc7-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fix from Steve French:
"Small fix for an smb3 reconnect bug (also marked for stable)"

* tag '5.4-rc7-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: Fix persistent handles reconnect

lib: Remove select of inexistant GENERIC_IO

config option GENERIC_IO was removed but still selected by lib/kconfig
This patch finish the cleaning.

Fixes: 9de8da47742b ("kconfig: kill off GENERIC_IO option")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'pinctrl-v5.4-3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

- Fix glitch risks in the Intel GPIO

- Fix the Intel Cherryview valid irq mask calculation.

- Allocate the Intel Cherryview irqchip dynamically.

- Fix the valid mask init sequency on the ST STMFX driver.

* tag 'pinctrl-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stmfx: fix valid_mask init sequence
  pinctrl: cherryview: Allocate IRQ chip dynamic
  pinctrl: cherryview: Fix irq_valid_mask calculation
  pinctrl: intel: Avoid potential glitches if pin is in GPIO mode

Merge tag 'for-5.4-rc6-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"A few regressions and fixes for stable.

  Regressions:

   - fix a race leading to metadata space leak after task received a
     signal

   - un-deprecate 2 ioctls, marked as deprecated by mistake

  Fixes:

   - fix limit check for number of devices during chunk allocation

   - fix a race due to double evaluation of i_size_read inside max()
     macro, can cause a crash

   - remove wrong device id check in tree-checker"

* tag 'for-5.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: un-deprecate ioctls START_SYNC and WAIT_SYNC
  btrfs: save i_size to avoid double evaluation of i_size_read in compress_file_range
  Btrfs: fix race leading to metadata space leak after task received signal
  btrfs: tree-checker: Fix wrong check on max devid
  btrfs: Consider system chunk array size for new SYSTEM chunks

Merge tag 'linux-watchdog-5.4-rc7' of git://linux-watchdog.org/linux-watchdog

Pull watchdog fixes from Wim Van Sebroeck:

- cpwd: fix build regression

- pm8916_wdt: fix pretimeout registration flow

- meson: Fix the wrong value of left time

- imx_sc_wdt: Pretimeout should follow SCU firmware format

- bd70528: Add MODULE_ALIAS to allow module auto loading

* tag 'linux-watchdog-5.4-rc7' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: bd70528: Add MODULE_ALIAS to allow module auto loading
  watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware format
  watchdog: meson: Fix the wrong value of left time
  watchdog: pm8916_wdt: fix pretimeout registration flow
  watchdog: cpwd: fix build regression

Merge tag 'soundwire-5.5-rc1' of git://git./linux/kernel/git/vkoul/soundwire into char-misc-next

Vinod writes:

soundwire updates for v5.5-rc1

This round we have bunch of core and Intel driver updates spearheaded
by Pierre

Details
- Update unique id checks in core and ACPI helpers
- Improvements to to Intel driver and cadence lib

* tag 'soundwire-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: ignore uniqueID when irrelevant
  soundwire: slave: add helper to extract slave ID
  soundwire: remove bitfield for unique_id, use u8
  soundwire: intel: fix PDI/stream mapping for Bulk
  soundwire: cadence_master: make clock stop exit configurable on init
  soundwire: intel/cadence: add flag for interrupt enable
  soundwire: intel: add helper for initialization
  soundwire: cadence_master: add hw_reset capability in debugfs
  soundwire: intel/cadence: fix startup sequence
  soundwire: intel: use correct header for io calls
  soundwire: cadence_master: improve PDI allocation
  soundwire: intel: don't filter out PDI0/1
  soundwire: cadence/intel: simplify PDI/port mapping
  soundwire: intel: remove playback/capture stream_name
  soundwire: remove DAI_ID_RANGE definitions
  soundwire: intel: remove X86 dependency
  soundwire: intel: add missing headers for cross-compilation

soundwire: ignore uniqueID when irrelevant

The uniqueID is useful when there are two or more devices of the same
type (identical manufacturer ID, part ID) on the same link.

When there is a single device of a given type on a link, its uniqueID
is irrelevant. It's not uncommon on actual platforms to see variations
of the uniqueID, or differences between devID registers and ACPI _ADR
fields.

This patch suggests a filter on startup to identify 'single' devices
and tag them accordingly. The uniqueID is then not used for the probe,
and the device name omits the uniqueID as well.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022234808.17432-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

soundwire: slave: add helper to extract slave ID

Simplify the loop with a helper. The only functionality change is that
we continue the loop even with an ACPI error.

Follow-up patches will build on this change.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022234808.17432-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

soundwire: remove bitfield for unique_id, use u8

There is no good reason why the unique_id needs to be stored as 4
bits. The code will work without changes with a u8 since all values
are already filtered while parsing the ACPI tables and Slave devID
registers.

Use u8 representation. This will allow us to encode a
"IGNORE_UNIQUE_ID" value to account for firmware/BIOS creativity.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022234808.17432-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

soundwire: intel: fix PDI/stream mapping for Bulk

The previous formula is incorrect for PDI0/1, the mapping is not
linear but has a discontinuity between PDI1 and PDI2.

This change has no effect on PCM PDIs (same mapping).

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022232948.17156-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

1) BPF sample build fixes from Björn Töpel

2) Fix powerpc bpf tail call implementation, from Eric Dumazet.

3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet.

4) Fix crash in ebtables when using dnat target, from Florian Westphal.

5) Fix port disable handling whne removing bcm_sf2 driver, from Florian
    Fainelli.

6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski.

7) Various KCSAN fixes all over the networking, from Eric Dumazet.

8) Memory leaks in mlx5 driver, from Alex Vesker.

9) SMC interface refcounting fix, from Ursula Braun.

10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu.

11) Add a TX lock to synchonize the kTLS TX path properly with crypto
    operations. From Jakub Kicinski.

12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano
    Garzarella.

13) Infinite loop in Intel ice driver, from Colin Ian King.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
  ixgbe: need_wakeup flag might not be set for Tx
  i40e: need_wakeup flag might not be set for Tx
  igb/igc: use ktime accessors for skb->tstamp
  i40e: Fix for ethtool -m issue on X722 NIC
  iavf: initialize ITRN registers with correct values
  ice: fix potential infinite loop because loop counter being too small
  qede: fix NULL pointer deref in __qede_remove()
  net: fix data-race in neigh_event_send()
  vsock/virtio: fix sock refcnt holding during the shutdown
  net: ethernet: octeon_mgmt: Account for second possible VLAN header
  mac80211: fix station inactive_time shortly after boot
  net/fq_impl: Switch to kvmalloc() for memory allocation
  mac80211: fix ieee80211_txq_setup_flows() failure path
  ipv4: Fix table id reference in fib_sync_down_addr
  ipv6: fixes rt6_probe() and fib6_nh->last_probe init
  net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
  net: usb: qmi_wwan: add support for DW5821e with eSIM support
  CDC-NCM: handle incomplete transfer of MTU
  nfc: netlink: fix double device reference drop
  NFC: st21nfca: fix double free
  ...

Merge tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- Two NVMe device removal crash fixes, and a compat fixup for for an
   ioctl that was introduced in this release (Anton, Charles, Max - via
   Keith)

- Missing error path mutex unlock for drbd (Dan)

- cgroup writeback fixup on dead memcg (Tejun)

- blkcg online stats print fix (Tejun)

* tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block:
  cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead
  block: drbd: remove a stray unlock in __drbd_send_protocol()
  blkcg: make blkcg_print_stat() print stats only for online blkgs
  nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
  nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
  nvme-rdma: fix a segmentation fault during module unload

Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Fixes 2019-11-08

This series contains fixes to igb, igc, ixgbe, i40e, iavf and ice
drivers.

Colin Ian King fixes a potentially wrap-around counter in a for-loop.

Nick fixes the default ITR values for the iavf driver to 50 usecs
interval.

Arkadiusz fixes 'ethtool -m' for X722 devices where the correct value
cannot be obtained from the firmware, so add X722 to the check to ensure
the wrong value is not returned.

Jake fixes igb and igc drivers in their implementation of launch time
support by declaring skb->tstamp value as ktime_t instead of s64.

Magnus fixes ixgbe and i40e where the need_wakeup flag for transmit may
not be set for AF_XDP sockets that are only used to send packets.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ixgbe: need_wakeup flag might not be set for Tx

The need_wakeup flag for Tx might not be set for AF_XDP sockets that
are only used to send packets. This happens if there is at least one
outstanding packet that has not been completed by the hardware and we
get that corresponding completion (which will not generate an
interrupt since interrupts are disabled in the napi poll loop) between
the time we stopped processing the Tx completions and interrupts are
enabled again. In this case, the need_wakeup flag will have been
cleared at the end of the Tx completion processing as we believe we
will get an interrupt from the outstanding completion at a later point
in time. But if this completion interrupt occurs before interrupts
are enable, we lose it and should at that point really have set the
need_wakeup flag since there are no more outstanding completions that
can generate an interrupt to continue the processing. When this
happens, user space will see a Tx queue need_wakeup of 0 and skip
issuing a syscall, which means will never get into the Tx processing
again and we have a deadlock.

This patch introduces a quick fix for this issue by just setting the
need_wakeup flag for Tx to 1 all the time. I am working on a proper
fix for this that will toggle the flag appropriately, but it is more
challenging than I anticipated and I am afraid that this patch will
not be completed before the merge window closes, therefore this easier
fix for now. This fix has a negative performance impact in the range
of 0% to 4%. Towards the higher end of the scale if you have driver
and application on the same core and issue a lot of packets, and
towards no negative impact if you use two cores, lower transmission
speeds and/or a workload that also receives packets.

Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

i40e: need_wakeup flag might not be set for Tx

The need_wakeup flag for Tx might not be set for AF_XDP sockets that
are only used to send packets. This happens if there is at least one
outstanding packet that has not been completed by the hardware and we
get that corresponding completion (which will not generate an
interrupt since interrupts are disabled in the napi poll loop) between
the time we stopped processing the Tx completions and interrupts are
enabled again. In this case, the need_wakeup flag will have been
cleared at the end of the Tx completion processing as we believe we
will get an interrupt from the outstanding completion at a later point
in time. But if this completion interrupt occurs before interrupts
are enable, we lose it and should at that point really have set the
need_wakeup flag since there are no more outstanding completions that
can generate an interrupt to continue the processing. When this
happens, user space will see a Tx queue need_wakeup of 0 and skip
issuing a syscall, which means will never get into the Tx processing
again and we have a deadlock.

This patch introduces a quick fix for this issue by just setting the
need_wakeup flag for Tx to 1 all the time. I am working on a proper
fix for this that will toggle the flag appropriately, but it is more
challenging than I anticipated and I am afraid that this patch will
not be completed before the merge window closes, therefore this easier
fix for now. This fix has a negative performance impact in the range
of 0% to 4%. Towards the higher end of the scale if you have driver
and application on the same core and issue a lot of packets, and
towards no negative impact if you use two cores, lower transmission
speeds and/or a workload that also receives packets.

Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

igb/igc: use ktime accessors for skb->tstamp

When implementing launch time support in the igb and igc drivers, the
skb->tstamp value is assumed to be a s64, but it's declared as a ktime_t
value.

Although ktime_t is typedef'd to s64 it wasn't always, and the kernel
provides accessors for ktime_t values.

Use the ktime_to_timespec64 and ktime_set accessors instead of directly
assuming that the variable is always an s64.

This improves portability if the code is ever moved to another kernel
version, or if the definition of ktime_t ever changes again in the
future.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

i40e: Fix for ethtool -m issue on X722 NIC

This patch contains fix for a problem with command:
'ethtool -m <dev>'
which breaks functionality of:
'ethtool <dev>'
when called on X722 NIC

Disallowed update of link phy_types on X722 NIC
Currently correct value cannot be obtained from FW
Previously wrong value returned by FW was used and was
a root cause for incorrect output of 'ethtool <dev>' command

Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

iavf: initialize ITRN registers with correct values

Since commit 92418fb14750 ("i40e/i40evf: Use usec value instead of reg
value for ITR defines") the driver tracks the interrupt throttling
intervals in single usec units, although the actual ITRN registers are
programmed in 2 usec units. Most register programming flows in the driver
correctly handle the conversion, although it is currently not applied when
the registers are initialized to their default values. Most of the time
this doesn't present a problem since the default values are usually
immediately overwritten through the standard adaptive throttling mechanism,
or updated manually by the user, but if adaptive throttling is disabled and
the interval values are left alone then the incorrect value will persist.

Since the intended default interval of 50 usecs (vs. 100 usecs as
programmed) performs better for most traffic workloads, this can lead to
performance regressions.

This patch adds the correct conversion when writing the initial values to
the ITRN registers.

Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: fix potential infinite loop because loop counter being too small

Currently the for-loop counter i is a u8 however it is being checked
against a maximum value hw->num_tx_sched_layers which is a u16. Hence
there is a potential wrap-around of counter i back to zero if
hw->num_tx_sched_layers is greater than 255. Fix this by making i
a u16.

Addresses-Coverity: ("Infinite loop")
Fixes: b36c598c999c ("ice: Updates to Tx scheduler code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

qede: fix NULL pointer deref in __qede_remove()

While rebooting the system with SR-IOV vfs enabled leads
to below crash due to recurrence of __qede_remove() on the VF
devices (first from .shutdown() flow of the VF itself and
another from PF's .shutdown() flow executing pci_disable_sriov())

This patch adds a safeguard in __qede_remove() flow to fix this,
so that driver doesn't attempt to remove "already removed" devices.

[  194.360134] BUG: unable to handle kernel NULL pointer dereference at 00000000000008dc
[  194.360227] IP: [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[  194.360304] PGD 0
[  194.360325] Oops: 0000 [#1] SMP
[  194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200
[  194.361044]  qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables]
[  194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1
[  194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019
[  194.361412] task: ffff9cea9b360000 ti: ffff9ceabebdc000 task.ti: ffff9ceabebdc000
[  194.361463] RIP: 0010:[<ffffffffc03553c4>]  [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[  194.361534] RSP: 0018:ffff9ceabebdfac0  EFLAGS: 00010282
[  194.361570] RAX: 0000000000000000 RBX: ffff9cd013846098 RCX: 0000000000000000
[  194.361621] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9cd013846098
[  194.361668] RBP: ffff9ceabebdfae8 R08: 0000000000000000 R09: 0000000000000000
[  194.361715] R10: 00000000bfe14201 R11: ffff9ceabfe141e0 R12: 0000000000000000
[  194.361762] R13: ffff9cd013846098 R14: 0000000000000000 R15: ffff9ceab5e48000
[  194.361810] FS:  00007f799c02d880(0000) GS:ffff9ceacb0c0000(0000) knlGS:0000000000000000
[  194.361865] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  194.361903] CR2: 00000000000008dc CR3: 0000001bdac76000 CR4: 00000000007607e0
[  194.361953] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  194.362002] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  194.362051] PKRU: 55555554
[  194.362073] Call Trace:
[  194.362109]  [<ffffffffc0355500>] qede_remove+0x10/0x20 [qede]
[  194.362180]  [<ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0
[  194.362240]  [<ffffffffb98b3c52>] __device_release_driver+0x82/0xf0
[  194.362285]  [<ffffffffb98b3ce3>] device_release_driver+0x23/0x30
[  194.362343]  [<ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0
[  194.362388]  [<ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20
[  194.362450]  [<ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160
[  194.362496]  [<ffffffffb97f1aec>] sriov_disable+0x3c/0xf0
[  194.362534]  [<ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30
[  194.362599]  [<ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed]
[  194.362658]  [<ffffffffb9622df6>] ? kfree+0x106/0x140
[  194.362709]  [<ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed]
[  194.362754]  [<ffffffffb9622df6>] ? kfree+0x106/0x140
[  194.362803]  [<ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed]
[  194.362854]  [<ffffffffc035544e>] __qede_remove+0xae/0x130 [qede]
[  194.362904]  [<ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede]
[  194.362956]  [<ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60
[  194.363010]  [<ffffffffb98b180b>] device_shutdown+0xfb/0x1f0
[  194.363066]  [<ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40
[  194.363107]  [<ffffffffb94b66e2>] kernel_restart+0x12/0x60
[  194.363146]  [<ffffffffb94b6959>] SYSC_reboot+0x229/0x260
[  194.363196]  [<ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0
[  194.363253]  [<ffffffffb942b621>] ? __switch_to+0x151/0x580
[  194.363304]  [<ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0
[  194.363343]  [<ffffffffb94b69fe>] SyS_reboot+0xe/0x10
[  194.363387]  [<ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a
[  194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0
[  194.363712] RIP  [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[  194.363764]  RSP <ffff9ceabebdfac0>
[  194.363791] CR2: 00000000000008dc

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fix data-race in neigh_event_send()

KCSAN reported the following data-race [1]

The fix will also prevent the compiler from optimizing out
the condition.

[1]

BUG: KCSAN: data-race in neigh_resolve_output / neigh_resolve_output

write to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 1:
neigh_event_send include/net/neighbour.h:443 [inline]
neigh_resolve_output+0x78/0x480 net/core/neighbour.c:1474
neigh_output include/net/neighbour.h:511 [inline]
ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290
ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip_output+0xdf/0x210 net/ipv4/ip_output.c:432
dst_output include/net/dst.h:436 [inline]
ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125
__ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532
ip_queue_xmit+0x45/0x60 include/net/ip.h:237
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
__tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976
tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999
tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515
tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598
tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:618

read to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 0:
neigh_event_send include/net/neighbour.h:442 [inline]
neigh_resolve_output+0x57/0x480 net/core/neighbour.c:1474
neigh_output include/net/neighbour.h:511 [inline]
ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290
ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip_output+0xdf/0x210 net/ipv4/ip_output.c:432
dst_output include/net/dst.h:436 [inline]
ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125
__ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532
ip_queue_xmit+0x45/0x60 include/net/ip.h:237
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
__tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976
tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999
tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515
tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'pwm/for-5.4-rc7' of git://git./linux/kernel/git/thierry.reding/linux-pwm

Pull pwm fix from Thierry Reding:
"One more fix to keep a reference to the driver's module as long as
there are users of the PWM exposed by the driver"

* tag 'pwm/for-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: bcm-iproc: Prevent unloading the driver module while in use

sched: Fix pick_next_task() vs 'change' pattern race

Commit 67692435c411 ("sched: Rework pick_next_task() slow-path")
inadvertly introduced a race because it changed a previously
unexplored dependency between dropping the rq->lock and
sched_class::put_prev_task().

The comments about dropping rq->lock, in for example
newidle_balance(), only mentions the task being current and ->on_cpu
being set. But when we look at the 'change' pattern (in for example
sched_setnuma()):

queued = task_on_rq_queued(p); /* p->on_rq == TASK_ON_RQ_QUEUED */
running = task_current(rq, p); /* rq->curr == p */

if (queued)
dequeue_task(...);
if (running)
put_prev_task(...);

/* change task properties */

if (queued)
enqueue_task(...);
if (running)
set_next_task(...);

It becomes obvious that if we do this after put_prev_task() has
already been called on @p, things go sideways. This is exactly what
the commit in question allows to happen when it does:

prev->sched_class->put_prev_task(rq, prev, rf);
if (!rq->nr_running)
newidle_balance(rq, rf);

The newidle_balance() call will drop rq->lock after we've called
put_prev_task() and that allows the above 'change' pattern to
interleave and mess up the state.

Furthermore, it turns out we lost the RT-pull when we put the last DL
task.

Fix both problems by extracting the balancing from put_prev_task() and
doing a multi-class balance() pass before put_prev_task().

Fixes: 67692435c411 ("sched: Rework pick_next_task() slow-path")
Reported-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Quentin Perret <qperret@google.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>

sched/core: Fix compilation error when cgroup not selected

When cgroup is disabled the following compilation error was hit

kernel/sched/core.c: In function ‘uclamp_update_active_tasks’:
kernel/sched/core.c:1081:23: error: storage size of ‘it’ isn’t known
  struct css_task_iter it;
       ^~
kernel/sched/core.c:1084:2: error: implicit declaration of function ‘css_task_iter_start’; did you mean ‘__sg_page_iter_start’? [-Werror=implicit-function-declaration]
  css_task_iter_start(css, 0, &it);
  ^~~~~~~~~~~~~~~~~~~
  __sg_page_iter_start
kernel/sched/core.c:1085:14: error: implicit declaration of function ‘css_task_iter_next’; did you mean ‘__sg_page_iter_next’? [-Werror=implicit-function-declaration]
  while ((p = css_task_iter_next(&it))) {
      ^~~~~~~~~~~~~~~~~~
      __sg_page_iter_next
kernel/sched/core.c:1091:2: error: implicit declaration of function ‘css_task_iter_end’; did you mean ‘get_task_cred’? [-Werror=implicit-function-declaration]
  css_task_iter_end(&it);
  ^~~~~~~~~~~~~~~~~
  get_task_cred
kernel/sched/core.c:1081:23: warning: unused variable ‘it’ [-Wunused-variable]
  struct css_task_iter it;
       ^~
cc1: some warnings being treated as errors
make[2]: *** [kernel/sched/core.o] Error 1

Fix by protetion uclamp_update_active_tasks() with
CONFIG_UCLAMP_TASK_GROUP

Fixes: babbe170e053 ("sched/uclamp: Update CPU's refcount on TG's clamp changes")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Patrick Bellasi <patrick.bellasi@matbug.net>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ben Segall <bsegall@google.com>
Link: https://lkml.kernel.org/r/20191105112212.596-1-qais.yousef@arm.com

cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead

cgroup writeback tries to refresh the associated wb immediately if the
current wb is dead.  This is to avoid keeping issuing IOs on the stale
wb after memcg - blkcg association has changed (ie. when blkcg got
disabled / enabled higher up in the hierarchy).

Unfortunately, the logic gets triggered spuriously on inodes which are
associated with dead cgroups.  When the logic is triggered on dead
cgroups, the attempt fails only after doing quite a bit of work
allocating and initializing a new wb.

While c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if mapping
has no dirty pages") alleviated the issue significantly as it now only
triggers when the inode has dirty pages.  However, the condition can
still be triggered before the inode is switched to a different cgroup
and the logic simply doesn't make sense.

Skip the immediate switching if the associated memcg is dying.

This is a simplified version of the following two patches:

* https://lore.kernel.org/linux-mm/20190513183053.GA73423@dennisz-mbp/
* http://lkml.kernel.org/r/156355839560.2063.5265687291430814589.stgit@buzz

Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: e8a7abf5a5bd ("writeback: disassociate inodes from dying bdi_writebacks")
Acked-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'ceph-for-5.4-rc7' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
"Some late-breaking dentry handling fixes from Al and Jeff, a patch to
  further restrict copy_file_range() to avoid potential data corruption
  from Luis and a fix for !CONFIG_CEPH_FSCACHE kernels.

  Everything but the fscache fix is marked for stable"

* tag 'ceph-for-5.4-rc7' of git://github.com/ceph/ceph-client:
  ceph: return -EINVAL if given fsc mount option on kernel w/o support
  ceph: don't allow copy_file_range when stripe_count != 1
  ceph: don't try to handle hashed dentries in non-O_CREAT atomic_open
  ceph: add missing check in d_revalidate snapdir handling
  ceph: fix RCU case handling in ceph_d_revalidate()
  ceph: fix use-after-free in __ceph_remove_cap()

vsock/virtio: fix sock refcnt holding during the shutdown

The "42f5cda5eaf4" commit rightly set SOCK_DONE on peer shutdown,
but there is an issue if we receive the SHUTDOWN(RDWR) while the
virtio_transport_close_timeout() is scheduled.
In this case, when the timeout fires, the SOCK_DONE is already
set and the virtio_transport_close_timeout() will not call
virtio_transport_reset() and virtio_transport_do_close().
This causes that both sockets remain open and will never be released,
preventing the unloading of [virtio|vhost]_transport modules.

This patch fixes this issue, calling virtio_transport_reset() and
virtio_transport_do_close() when we receive the SHUTDOWN(RDWR)
and there is nothing left to read.

Fixes: 42f5cda5eaf4 ("vsock/virtio: set SOCK_DONE on peer shutdown")
Cc: Stephen Barber <smbarber@chromium.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-net-2019-11-08' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Three small fixes:
* we hit a failure path bug related to
ieee80211_txq_setup_flows()
* also use kvmalloc() to make that less likely
* fix a timing value shortly after boot (during
INITIAL_JIFFIES)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: octeon_mgmt: Account for second possible VLAN header

Octeon's input ring-buffer entry has 14 bits-wide size field, so to account
for second possible VLAN header max_mtu must be further reduced.

Fixes: 109cc16526c6d ("ethernet/cavium: use core min/max MTU checking")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'fpga-dfl-for-5.5' of git://git./linux/kernel/git/mdf/linux-fpga into char-misc-next

Moritz writes:

Here is the first set of FPGA changes for 5.5

The first patch from Stephen is a trivial cleanup patch.

The following three patches add hwmon support to DFL FPGAs.

All of this patches have been reviewed and been in the last couple
of linux-next releases without issues.

Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-dfl-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
  fpga: dfl: fme: add power management support
  fpga: dfl: fme: add thermal management support
  Documentation: fpga: dfl: add descriptions for thermal/power management interfaces
  fpga: Remove dev_err() usage after platform_get_irq()

Merge tag 'modules-for-v5.4-rc7' of git://git./linux/kernel/git/jeyu/linux

Pull modules fix from Jessica Yu:
"Fix `make nsdeps` for modules composed of multiple source files.

  Since $mod_source_files was not in quotes in the call to
  generate_deps_for_ns(), not all the source files for a module were
  being passed to spatch"

* tag 'modules-for-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  scripts/nsdeps: make sure to pass all module source files to spatch

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fix from Will Deacon:
"Fix pte_same() to avoid getting stuck on write fault.

  This single arm64 fix is a revert of 747a70e60b72 ("arm64: Fix
  copy-on-write referencing in HugeTLB"), not because that patch was
  wrong, but because it was broken by aa57157be69f ("arm64: Ensure
  VM_WRITE|VM_SHARED ptes are clean by default") which we merged in
  -rc6.

  We spotted the issue in Android (AOSP), where one of the JIT threads
  gets stuck on a write fault during boot because the faulting pte is
  marked as PTE_DIRTY | PTE_WRITE | PTE_RDONLY and the fault handler
  decides that there's nothing to do thanks to pte_same() masking out
  PTE_RDONLY.

  Thanks to John Stultz for reporting this and testing this so quickly,
  and to Steve Capper for confirming that the HugeTLB tests continue to
  pass"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Do not mask out PTE_RDONLY in pte_same()

pwm: bcm-iproc: Prevent unloading the driver module while in use

The owner member of struct pwm_ops must be set to THIS_MODULE to
increase the reference count of the module such that the module cannot
be removed while its code is in use.

Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Merge tag 'xarray-5.4' of git://git.infradead.org/users/willy/linux-dax

Pull XArray fixes from Matthew Wilcox:
"These all fix various bugs, some of which people have tripped over and
  some of which have been caught by automatic tools"

* tag 'xarray-5.4' of git://git.infradead.org/users/willy/linux-dax:
  idr: Fix idr_alloc_u32 on 32-bit systems
  idr: Fix integer overflow in idr_for_each_entry
  radix tree: Remove radix_tree_iter_find
  idr: Fix idr_get_next_ul race with idr_remove
  XArray: Fix xas_next() with a single entry at 0

Merge tag 'pm-5.4-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fix from Rafael Wysocki:
"Fix an 'unchecked MSR access' warning in the intel_pstate cpufreq
driver (Srinivas Pandruvada)"

* tag 'pm-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix invalid EPB setting

Merge tag 'sound-5.4-rc7' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"It became a bit largish, but all small and good for 5.4:

   - A regression fix of ALSA timer code bug that sneaked in by a recent
     cleanup; never trust innocent-looking guys...

   - Fix for compress API max size check signedness

   - Fixes in HD-audio: CA0132 work stall, Intel Tigerlake HDMI

   - A few fixes for SOF: memory leak, sanity-check and build fixes

   - A collection of device-specific fixes: firewire, rockchip, ASoC
     HDMI, rsnd, ASoC HDA, stm32, TI, kirkwood, msm, max98373"

* tag 'sound-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: timer: Fix incorrectly assigned timer instance
  ASoC: SOF: topology: Fix bytes control size checks
  ALSA: hda: hdmi - add Tigerlake support
  ASoC: max98373: replace gpio_request with devm_gpio_request
  ASoC: stm32: sai: add restriction on mmap support
  ALSA: hda/ca0132 - Fix possible workqueue stall
  ASoC: hdac_hda: fix race in device removal
  ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series
  ASoC: rockchip: rockchip_max98090: Enable SHDN to fix headset detection
  ASoC: ti: sdma-pcm: Add back the flags parameter for non standard dma names
  ASoC: SOF: ipc: Fix memory leak in sof_set_get_large_ctrl_data
  ASoC: SOF: Fix memory leak in sof_dfsentry_write
  ASoC: SOF: Intel: hda-stream: fix the CONFIG_ prefix missing
  ASoC: kirkwood: fix device remove ordering
  ASoC: rsnd: dma: fix SSI9 4/5/6/7 busif dma address
  ASoC: hdmi-codec: drop mutex locking again
  ASoC: kirkwood: fix external clock probe defer
  ASoC: compress: fix unsigned integer overflow check
  ASoC: msm8916-wcd-analog: Fix RX1 selection in RDAC2 MUX

Merge tag 'drm-fixes-2019-11-08' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Weekly fixes for drm: amdgpu has a few but they are pretty scattered
  fixes, the fbdev one is a build regression fix that we didn't want to
  risk leaving out, otherwise a couple of i915, one radeon and a core
  atomic fix.

  core:
   - add missing documentation for GEM shmem madvise helpers
   - Fix for a state dereference in atomic self-refresh helpers

  fbdev:
   - One compilation fix for c2p fbdev helpers

  amdgpu:
   - Fix navi14 display issue root cause and revert workaround
   - GPU reset scheduler interaction fix
   - Fix fan boost on multi-GPU
   - Gfx10 and sdma5 fixes for navi
   - GFXOFF fix for renoir
   - Add navi14 PCI ID
   - GPUVM fix for arcturus

  radeon:
   - Port an SI power fix from amdgpu

  i915:
   - Fix HPD poll to avoid kworker consuming a lot of cpu cycles.
   - Do not use TBT type for non Type-C ports"

* tag 'drm-fixes-2019-11-08' of git://anongit.freedesktop.org/drm/drm:
  drm/radeon: fix si_enable_smc_cac() failed issue
  drm/amdgpu/renoir: move gfxoff handling into gfx9 module
  drm/amdgpu: add warning for GRBM 1-cycle delay issue in gfx9
  drm/amdgpu: add dummy read by engines for some GCVM status registers in gfx10
  drm/amdgpu: register gpu instance before fan boost feature enablment
  drm/amd/swSMU: fix smu workload bit map error
  drm/shmem: Add docbook comments for drm_gem_shmem_object madvise fields
  drm/amdgpu: add navi14 PCI ID
  Revert "drm/amd/display: setting the DIG_MODE to the correct value."
  drm/amd/display: Add ENGINE_ID_DIGD condition check for Navi14
  drm/amdgpu: dont schedule jobs while in reset
  drm/amdgpu/arcturus: properly set BANK_SELECT and FRAGMENT_SIZE
  drm/atomic: fix self-refresh helpers crtc state dereference
  drm/i915/dp: Do not switch aux to TBT mode for non-TC ports
  drm/i915: Avoid HPD poll detect triggering a new detect cycle
  fbdev: c2p: Fix link failure on non-inlining

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"Fixes for various clk driver issues that happened because of code we
  merged this merge window.

  The Amlogic driver was missing some flags causing rates to be rounded
  improperly or clk_set_rate() to fail. The Samsung driver wasn't
  freeing everything on error paths and improperly saving/restoring PLL
  state across suspend/resume. The at91 driver was calling msleep() too
  early when scheduling hadn't started, so we put in place a quick
  solution until we can handle this sort of problem in the core
  framework.

  There were also problems with the Allwinner driver and operator
  precedence being incorrect causing subtle bugs. Finally, the TI driver
  was duplicating aliases and not delaying long enough leading to some
  unexpected timeouts"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: ti: clkctrl: Fix failed to enable error with double udelay timeout
  clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call
  clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18
  clk: sunxi: Fix operator precedence in sunxi_divs_clk_setup
  clk: ast2600: Fix enabling of clocks
  clk: at91: avoid sleeping early
  clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARM
  clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume
  clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU
  clk: samsung: exynos5433: Fix error paths
  clk: at91: sam9x60: fix programmable clock
  clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes
  clk: meson: g12a: fix cpu clock rate setting
  clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate

interconnect: qcom: add msm8974 driver

Add driver for the Qualcomm MSM8974 interconnect providers that support
setting system bandwidth requirements between various network-on-chip
fabrics.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191024103054.9770-3-masneyb@onstation.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20191108125349.24191-3-georgi.djakov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: interconnect: qcom: add msm8974 bindings

Add device tree bindings for the Qualcomm MSM8974 interconnect providers
that support setting system bandwidth requirements between various
network-on-chip fabrics.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191024103054.9770-2-masneyb@onstation.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20191108125349.24191-2-georgi.djakov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: drbd: remove a stray unlock in __drbd_send_protocol()

There are two callers of this function and they both unlock the mutex so
this ends up being a double unlock.

Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

cpufreq: intel_pstate: Fix invalid EPB setting

The max value of EPB can only be 0x0F. Attempting to set more than that
triggers an "unchecked MSR access error" warning which happens in
intel_pstate_hwp_force_min_perf() called via cpufreq stop_cpu().

However, it is not even necessary to touch the EPB from intel_pstate,
because it is restored on every CPU online by the intel_epb.c code,
so let that code do the right thing and drop the redundant (and
incorrect) EPB update from intel_pstate.

Fixes: af3b7379e2d70 ("cpufreq: intel_pstate: Force HWP min perf before offline")
Reported-by: Qian Cai <cai@lca.pw>
Cc: 5.2+ <stable@vger.kernel.org> # 5.2+
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

fsi: aspeed: Fix OPB0 byte order register values

The data byte order selection registers in the APB2OPB primarily expose some
internal plumbing necessary to get correct write accesses onto the OPB.
OPB write cycles require "data mirroring" across the 32-bit data bus to
support variable data width slaves that don't implement "byte enables".
For slaves that do implement byte enables the master can signal which
bytes on the data bus the slave should consider valid.

The data mirroring behaviour is specified by the following table:

    +-----------------+----------+-----------------------------------+
    |                 |          |          32-bit Data Bus          |
    +---------+-------+----------+---------+---------+-------+-------+
    |         |       |          |         |         |       |       |
    |   ABus  | Mn_BE |  Request |   Dbus  |   Dbus  |  Dbus |  Dbus |
    | (30:31) | (0:3) | Transfer |   0:7   |   8:15  | 16:23 | 24:31 |
    |         |       |   Size   |  byte0  |  byte1  | byte2 | byte3 |
    +---------+-------+----------+---------+---------+-------+-------+
    |    00   |  1111 | fullword |  byte0  |  byte1  | byte2 | byte3 |
    +---------+-------+----------+---------+---------+-------+-------+
    |    00   |  1110 | halfword |  byte0  |  byte1  | byte2 |       |
    +---------+-------+----------+---------+---------+-------+-------+
    |    01   |  0111 |   byte   | _byte1_ |  byte1  | byte2 | byte3 |
    +---------+-------+----------+---------+---------+-------+-------+
    |    00   |  1100 | halfword |  byte0  |  byte1  |       |       |
    +---------+-------+----------+---------+---------+-------+-------+
    |    01   |  0110 |   byte   | _byte1_ |  byte1  | byte2 |       |
    +---------+-------+----------+---------+---------+-------+-------+
    |    10   |  0011 | halfword | _byte2_ | _byte3_ | byte2 | byte3 |
    +---------+-------+----------+---------+---------+-------+-------+
    |    00   |  1000 |   byte   |  byte0  |         |       |       |
    +---------+-------+----------+---------+---------+-------+-------+
    |    01   |  0100 |   byte   | _byte1_ |  byte1  |       |       |
    +---------+-------+----------+---------+---------+-------+-------+
    |    10   |  0010 |   byte   | _byte2_ |         | byte2 |       |
    +---------+-------+----------+---------+---------+-------+-------+
    |    11   |  0001 |   byte   | _byte3_ | _byte3_ |       | byte3 |
    +---------+-------+----------+---------+---------+-------+-------+

Mirrored data values are highlighted by underscores in the Dbus columns.
The values in the ABus and Request Transfer Size columns correspond to
values in the field names listed in the write data order select register
descriptions.

Similar configuration registers are exposed for reads which enables the
secondary purpose of configuring hardware endian conversions. It appears the
data bus byte order is switched around in hardware so set the registers such
that we can access the correct values for all widths. The values were
determined by experimentation on hardware against fixed CFAM register
values to configure the read data order, then in combination with the
table above and the register layout documentation in the AST2600
datasheet performing write/read cycles to configure the write data order
registers.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-12-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsi: aspeed: Add trace points

These trace points help with debugging the FSI master. They show the low
level reads, writes and error states of the master.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-11-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsi: Add ast2600 master driver

The ast2600 BMC has a pair of FSI masters in it, behind an AHB to OPB
bridge.

The master driver supports reads and writes of full words, half word and
byte accesses to remote CFAMs. It can perform very basic error recovery
through resetting of the FSI port when an error is detected, and the
issuing of breaks and terms.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Alistair Popple <alistair@popple.id.au>
--
v2:
- remove debugging
- squash in fixes
Link: https://lore.kernel.org/r/20191108051945.7109-10-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: fsi: Add description of FSI master

This describes the FSI master present in the AST2600.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-9-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsi: Move defines to common header

The FSI master registers are common to the hub and AST2600 master (and
the FSP2, if someone was to upstream a driver for that).

Add defines to the fsi-master.h header, and introduce headings to
delineate the existing low level details.

Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-8-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsi: fsi_master_class can be static

There are no users outside of this file.

Fixes: 0604d53d4da8 ("fsi: Add fsi-master class")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-7-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsi: core: Fix small accesses and unaligned offsets via sysfs

Subtracting the offset delta from four-byte alignment lead to wrapping
of the requested length where `count` is less than `off`. Generalise the
length handling to enable and optimise aligned access sizes for all
offset and size combinations. The new formula produces the following
results for given offset and count values:

    offset  count | length
    --------------+-------
    0       1     | 1
    0       2     | 2
    0       3     | 2
    0       4     | 4
    0       5     | 4
    1       1     | 1
    1       2     | 1
    1       3     | 1
    1       4     | 1
    1       5     | 1
    2       1     | 1
    2       2     | 2
    2       3     | 2
    2       4     | 2
    2       5     | 2
    3       1     | 1
    3       2     | 1
    3       3     | 1
    3       4     | 1
    3       5     | 1

We might need something like this for the cfam chardevs as well, for
example we don't currently implement any alignment restrictions /
handling in the hardware master driver.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-6-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

trace: fsi: Print transfer size unsigned

Due to other bugs I observed a spurious -1 transfer size.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-5-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ABI: Update FSI path documentation

The paths added back in 4.13 weren't quite correct. The in reality the
files documented lived under

  /sys/devices/../fsi0/rescan
  /sys/devices/../fsi0/break
  /sys/devices/../fsi0/slave@00:00/term
  /sys/devices/../fsi0/slave@00:00/raw

In 5.5 with the addition of the FSI class they move to

  /sys/devices/../fsi-master/fsi0/rescan
  /sys/devices/../fsi-master/fsi0/break
  /sys/devices/../fsi-master/fsi0/slave@00:00/term
  /sys/devices/../fsi-master/fsi0/slave@00:00/raw

This is closer to how the (incorrect) documentation described them.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-4-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsi: Move master attributes to fsi-master class

Populate fsi_master_class->dev_attrs with the existing attribute
definitions, so we don't need to explicitly register.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-3-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsi: Add fsi-master class

This change adds a device class for FSI masters, allowing access under
/sys/class/fsi-master/, and easier udev rules.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-2-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix station inactive_time shortly after boot

In the first 5 minutes after boot (time of INITIAL_JIFFIES),
ieee80211_sta_last_active() returns zero if last_ack is zero. This
leads to "inactive time" showing jiffies_to_msecs(jiffies).

# iw wlan0 station get fc:ec:da:64:a6:dd
Station fc:ec:da:64:a6:dd (on wlan0)
inactive time: 4294894049 ms
.
.
connected time: 70 seconds

Fix by returning last_rx if last_ack == 0.

Signed-off-by: Ahmed Zaki <anzaki@gmail.com>
Link: https://lore.kernel.org/r/20191031121243.27694-1-anzaki@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

net/fq_impl: Switch to kvmalloc() for memory allocation

The FQ implementation used by mac80211 allocates memory using kmalloc(),
which can fail; and Johannes reported that this actually happens in
practice.

To avoid this, switch the allocation to kvmalloc() instead; this also
brings fq_impl in line with all the FQ qdiscs.

Fixes: 557fc4a09803 ("fq: add fair queuing framework")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20191105155750.547379-1-toke@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: fix ieee80211_txq_setup_flows() failure path

If ieee80211_txq_setup_flows() fails, we don't clean up LED
state properly, leading to crashes later on, fix that.

Fixes: dc8b274f0952 ("mac80211: Move up init of TXQs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://lore.kernel.org/r/20191105154110.1ccf7112ba5d.I0ba865792446d051867b33153be65ce6b063d98c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge tag 'drm-fixes-5.4-2019-11-06' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

drm-fixes-5.4-2019-11-06:

amdgpu:
- Fix navi14 display issue root cause and revert workaround
- GPU reset scheduler interaction fix
- Fix fan boost on multi-GPU
- Gfx10 and sdma5 fixes for navi
- GFXOFF fix for renoir
- Add navi14 PCI ID
- GPUVM fix for arcturus

radeon:
- Port an SI power fix from amdgpu

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107032241.1021217-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2019-11-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix HPD poll to avoid kworker consuming a lot of cpu cycles.
- Do not use TBT type for non Type-C ports.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106213958.GA16525@intel.com

Merge tag 'drm-misc-fixes-2019-11-07-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

- Some new documentation for GEM shmem madvise helpers
- Fix for a state dereference in atomic self-refresh helpers
- One compilation fix for c2p fbdev helpers

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107082215.GA34850@gilmour.lan

ipv4: Fix table id reference in fib_sync_down_addr

Hendrik reported routes in the main table using source address are not
removed when the address is removed. The problem is that fib_sync_down_addr
does not account for devices in the default VRF which are associated
with the main table. Fix by updating the table id reference.

Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs")
Reported-by: Hendrik Donner <hd@os-cillation.de>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: fixes rt6_probe() and fib6_nh->last_probe init

While looking at a syzbot KCSAN report [1], I found multiple
issues in this code :

1) fib6_nh->last_probe has an initial value of 0.

   While probably okay on 64bit kernels, this causes an issue
   on 32bit kernels since the time_after(jiffies, 0 + interval)
   might be false ~24 days after boot (for HZ=1000)

2) The data-race found by KCSAN
   I could use READ_ONCE() and WRITE_ONCE(), but we also can
   take the opportunity of not piling-up too many rt6_probe_deferred()
   works by using instead cmpxchg() so that only one cpu wins the race.

[1]
BUG: KCSAN: data-race in find_match / find_match

write to 0xffff8880bb7aabe8 of 8 bytes by interrupt on cpu 1:
rt6_probe net/ipv6/route.c:663 [inline]
find_match net/ipv6/route.c:757 [inline]
find_match+0x5bd/0x790 net/ipv6/route.c:733
__find_rr_leaf+0xe3/0x780 net/ipv6/route.c:831
find_rr_leaf net/ipv6/route.c:852 [inline]
rt6_select net/ipv6/route.c:896 [inline]
fib6_table_lookup+0x383/0x650 net/ipv6/route.c:2164
ip6_pol_route+0xee/0x5c0 net/ipv6/route.c:2200
ip6_pol_route_output+0x48/0x60 net/ipv6/route.c:2452
fib6_rule_lookup+0x3d6/0x470 net/ipv6/fib6_rules.c:117
ip6_route_output_flags_noref+0x16b/0x230 net/ipv6/route.c:2484
ip6_route_output_flags+0x50/0x1a0 net/ipv6/route.c:2497
ip6_dst_lookup_tail+0x25d/0xc30 net/ipv6/ip6_output.c:1049
ip6_dst_lookup_flow+0x68/0x120 net/ipv6/ip6_output.c:1150
inet6_csk_route_socket+0x2f7/0x420 net/ipv6/inet6_connection_sock.c:106
inet6_csk_xmit+0x91/0x1f0 net/ipv6/inet6_connection_sock.c:121
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
tcp_xmit_probe_skb+0x19b/0x1d0 net/ipv4/tcp_output.c:3735

read to 0xffff8880bb7aabe8 of 8 bytes by interrupt on cpu 0:
rt6_probe net/ipv6/route.c:657 [inline]
find_match net/ipv6/route.c:757 [inline]
find_match+0x521/0x790 net/ipv6/route.c:733
__find_rr_leaf+0xe3/0x780 net/ipv6/route.c:831
find_rr_leaf net/ipv6/route.c:852 [inline]
rt6_select net/ipv6/route.c:896 [inline]
fib6_table_lookup+0x383/0x650 net/ipv6/route.c:2164
ip6_pol_route+0xee/0x5c0 net/ipv6/route.c:2200
ip6_pol_route_output+0x48/0x60 net/ipv6/route.c:2452
fib6_rule_lookup+0x3d6/0x470 net/ipv6/fib6_rules.c:117
ip6_route_output_flags_noref+0x16b/0x230 net/ipv6/route.c:2484
ip6_route_output_flags+0x50/0x1a0 net/ipv6/route.c:2497
ip6_dst_lookup_tail+0x25d/0xc30 net/ipv6/ip6_output.c:1049
ip6_dst_lookup_flow+0x68/0x120 net/ipv6/ip6_output.c:1150
inet6_csk_route_socket+0x2f7/0x420 net/ipv6/inet6_connection_sock.c:106
inet6_csk_xmit+0x91/0x1f0 net/ipv6/inet6_connection_sock.c:121
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 18894 Comm: udevd Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: cc3a86c802f0 ("ipv6: Change rt6_probe to take a fib6_nh")
Fixes: f547fac624be ("ipv6: rate-limit probes for neighbourless routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns: Fix the stray netpoll locks causing deadlock in NAPI path

This patch fixes the problem of the spin locks, originally
meant for the netpoll path of hns driver, causing deadlock in
the normal NAPI poll path. The issue happened due to the presence
of the stray leftover spin lock code related to the netpoll,
whose support was earlier removed from the HNS[1], got activated
due to enabling of NET_POLL_CONTROLLER switch.

Earlier background:
The netpoll handling code originally had this bug(as identified
by Marc Zyngier[2]) of wrong spin lock API being used which did
not disable the interrupts and hence could cause locking issues.
i.e. if the lock were first acquired in context to thread like
'ip' util and this lock if ever got later acquired again in
context to the interrupt context like TX/RX (Interrupts could
always pre-empt the lock holding task and acquire the lock again)
and hence could cause deadlock.

Proposed Solution:
1. If the netpoll was enabled in the HNS driver, which is not
   right now, we could have simply used spin_[un]lock_irqsave()
2. But as netpoll is disabled, therefore, it is best to get rid
   of the existing locks and stray code for now. This should
   solve the problem reported by Marc.

[1] https://git.kernel.org/torvalds/c/4bd2c03be7
[2] https://patchwork.ozlabs.org/patch/1189139/

Fixes: 4bd2c03be707 ("net: hns: remove ndo_poll_controller")
Cc: lipeng <lipeng321@huawei.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Reported-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: qmi_wwan: add support for DW5821e with eSIM support

Exactly same layout as the default DW5821e module, just a different
vid/pid.

The QMI interface is exposed in USB configuration #1:

P:  Vendor=413c ProdID=81e0 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5821e-eSIM Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: David S. Miller <davem@davemloft.net>

CDC-NCM: handle incomplete transfer of MTU

A malicious device may give half an answer when asked
for its MTU. The driver will proceed after this with
a garbage MTU. Anything but a complete answer must be treated
as an error.

V2: used sizeof as request by Alexander

Reported-and-tested-by: syzbot+0631d878823ce2411636@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: netlink: fix double device reference drop

The function nfc_put_device(dev) is called twice to drop the reference
to dev when there is no associated local llcp. Remove one of them to fix
the bug.

Fixes: 52feb444a903 ("NFC: Extend netlink interface for LTO, RW, and MIUX parameters support")
Fixes: d9b8d8e19b07 ("NFC: llcp: Service Name Lookup netlink interface")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:
"Two fixes for the HID subsystem:

   - regression fix for i2c-hid power management (Hans de Goede)

   - signed vs unsigned API fix for Wacom driver (Jason Gerecke)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: wacom: generic: Treat serial number and related fields as unsigned
  HID: i2c-hid: Send power-on command after reset

ceph: return -EINVAL if given fsc mount option on kernel w/o support

If someone requests fscache on the mount, and the kernel doesn't
support it, it should fail the mount.

[ Drop ceph prefix -- it's provided by pr_err. ]

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>