Lu Guanqun [Tue, 3 May 2011 16:33:43 +0000 (17:33 +0100)]
intel_sst: Enable recording via HS_MIC
We may need to make some of this board specific eventually.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lu Guanqun [Tue, 3 May 2011 16:33:28 +0000 (17:33 +0100)]
intel_sst: Set de-bounce time
In order to make jack detection behave properly, we have to set
the de-bounce time, otherwise, some weird events happens:
e.g. no plug-out event seen.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ramesh Babu K V [Tue, 3 May 2011 16:33:13 +0000 (17:33 +0100)]
intel_sst: rework jack implementation
This patch fixes the below issues w.r.t jack implementation
a) The current jack implementation in driver is implemented
in intelmid.c. It has moved to vendor files for better managebility
b) Cleaned up jack reporting per upstream comments
c) Implemented jack for msic, added code to read adc and deduce jack
type based on mic bias
d) Support detection of american headset
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
[Corrections]
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sitanshu Nanavati [Tue, 3 May 2011 16:33:01 +0000 (17:33 +0100)]
intel_sst: DMIC routing
This patch adds support for configuring and routing the
DMICs (assigned HW route to DMICs)
Signed-off-by: Sitanshu Nanavati <sitanshu.nanavati@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vinod Koul [Tue, 3 May 2011 16:32:49 +0000 (17:32 +0100)]
intel_sst: parameter tuning ioctl
This patch adds new IOCTL for application interface.
Using parameter tuning IOCTL, application can fine
tune the audio firmware for it's requirement.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dharageswari R [Tue, 3 May 2011 16:32:38 +0000 (17:32 +0100)]
intel_sst: Line out support
This patch adds the support for lineout. The
lineout input can be selected as any input channel
by using a new alsa mixer kcontrol.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vinod Koul [Tue, 3 May 2011 16:32:25 +0000 (17:32 +0100)]
intel_sst: ignore IRQ when suspended
The irq for audio is shared, so when device is supended driver should
not the read register and ignore the interrupt.
This patch ignores interrupts when device is suspended.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vinod Koul [Tue, 3 May 2011 16:32:13 +0000 (17:32 +0100)]
intel_sst: fix unload bugs
The current driver remove was erroneous and causes
errors when unloading or loading second time
This patch fixes both of these issues
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vinod Koul [Tue, 3 May 2011 16:32:01 +0000 (17:32 +0100)]
intel_sst: MSIC codec power optimisation
This patch adds power optimization for the msic codec and ensure
codec is completely powered off when codec is idle.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lu Guanqun [Fri, 8 Apr 2011 00:41:38 +0000 (08:41 +0800)]
sst: fix compile error
Add several include files to fix the below compile error.
drivers/staging/intel_sst/intelmid.c: In function ‘snd_intelmad_sst_register’:
drivers/staging/intel_sst/intelmid.c:805:2: error: ‘sst_drv_ctx’ undeclared (first use in this function)
drivers/staging/intel_sst/intelmid.c:805:2: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vinod Koul [Tue, 3 May 2011 16:31:49 +0000 (17:31 +0100)]
intel_sst: Save audio state across D3 on Medfield
During suspend and runtime_suspend audio dsp will be in D3 state
and will loose its context.
This patch adds support in driver to save the dsp context
and restore this context during resume
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Ramesh Babu K V <ramesh.babu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lu Guanqun [Wed, 6 Apr 2011 02:20:42 +0000 (10:20 +0800)]
sst: make register_sst_card more self-contained
register_sst_card is used in ASoC code with field `scard_ops` being NULL.
Without this patch, there will be NULL dereference.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Mon, 9 May 2011 17:47:51 +0000 (10:47 -0700)]
staging/keucr: don't use SUCCESS as macro name
Don't use "SUCCESS" as a macro name. This collides with SCSI's macro
of the same name, but with a different value:
drivers/staging/keucr/smcommon.h:9:9: warning: preprocessor token SUCCESS redefined
include/scsi/scsi.h:463:9: this was the original definition
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Mon, 9 May 2011 17:47:14 +0000 (10:47 -0700)]
staging/keucr: eliminate sparse warnings in ms.c
Eliminate sparse warnings in ms.c:
drivers/staging/keucr/ms.c:28:58: warning: right shift by bigger than source value
drivers/staging/keucr/ms.c:31:58: warning: right shift by bigger than source value
drivers/staging/keucr/ms.c:789:59: warning: cast truncates bits from constant value (
ffffff7f becomes 7f)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Mon, 9 May 2011 17:46:24 +0000 (10:46 -0700)]
staging/keucr: fix sparse statics and non-ANSI function warnings
Make lots of functions and data static (fixes sparse warnings).
Fix 5 functions to use ANSI format for function parameters (fixes
sparse warnings).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kalle Valo [Tue, 10 May 2011 04:40:34 +0000 (07:40 +0300)]
staging: ath6kl: provide hardware version to userspace
Signed-off-by: Kalle Valo <kalle.valo@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stephane Pajot [Mon, 9 May 2011 13:51:59 +0000 (15:51 +0200)]
Staging: comedi: fix brace coding style issue in jr3_pci.c
This is a patch to the jr3_pci.c file that fixes up a brace warning
found by the checkpatch.pl tool
Signed-off-by: Stephane Pajot <pajot.stephane@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Mon, 9 May 2011 15:04:45 +0000 (16:04 +0100)]
gma500: Fix dumb create crash
The error path from gtt_alloc returns NULL not a ptr error. The underlying
fail is caused by a bug in the size calculation. With these two fixed it
passes kmstest, although it's not really doing anything useful yet.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Mon, 9 May 2011 15:04:32 +0000 (16:04 +0100)]
gma500: sort out the file operations
Route everything via the proper DRM layer calls. This fixes the crash in
plymouth and is also necessary to begin supporting libkms.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Joe Perches [Mon, 9 May 2011 15:51:29 +0000 (08:51 -0700)]
staging: brcm80211: brcmfmac: Fix memset using sizeof(ptr) not sizeof(*ptr)
Found via coccinelle script
@@
type T;
T* ptr;
expression E1;
@@
* memset(E1, 0, sizeof(ptr));
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Mon, 9 May 2011 14:33:29 +0000 (16:33 +0200)]
staging: brcm80211: fix checkpatch issue introduced in wlc_alloc.c
Patch "[59807ce] local used function made static" introduced a new
checkpatch warning which is fixed with this patch.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Mon, 9 May 2011 14:33:27 +0000 (16:33 +0200)]
staging: brcm80211: make use of fls bit operation in wlc_phy_compute_dB
wlc_phy_compute_dB converts absolute power value to dB implementing
a fixed point calculation for 10*log10(x). It does this by determining
the most significant bit for value x. This can be done using the fls()
bit operation, which has arch specific and possibly more efficient
implementation.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Mon, 9 May 2011 14:33:25 +0000 (16:33 +0200)]
staging: brcm80211: use int_sqrt kernel function iso driver implementation
The driver code had its own implementation for fixed point square root
calculation, but such a function is already available in the linux
kernel so the driver implementation has been removed using the kernel
function.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Mon, 9 May 2011 14:33:24 +0000 (16:33 +0200)]
staging: brcm80211: remove unused function from wlc_phy_cmn.c
The function wlc_phy_qdiv_roundup() was not used and has been
removed.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Mon, 9 May 2011 14:33:22 +0000 (16:33 +0200)]
staging: brcm80211: wlc_aggregatable function prototype moved
The function wlc_aggregatable is used by wl_mac80211.c. The prototype
of the function was placed in include file wlc_scb.h but the interface
for wl_mac80211.c to other driver functions is to be placed in wlc_pub.h.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Mon, 9 May 2011 14:33:21 +0000 (16:33 +0200)]
staging: brcm80211: local used function made static
In wlc_alloc.c function for setting ID field in struct wlc_bsscfg
was only used locally. It has been made static and removed from
header file.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Henry Ptasinski [Mon, 9 May 2011 14:33:09 +0000 (16:33 +0200)]
staging: brcm80211: move functions only used by brcmsmac out of utils
The functions gitvar() and getintvar() are only used by brcmsmac, so move them
out of the bcmutils.c file, which is shared by both brcmsmac and brcmfmac.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Henry Ptasinski [Mon, 9 May 2011 14:33:08 +0000 (16:33 +0200)]
staging: brcm80211: move another file only used by brcmsmac into appropriate dir
nvram functions are only needed by brcmsmac.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Henry Ptasinski [Mon, 9 May 2011 14:33:07 +0000 (16:33 +0200)]
staging: brcm80211: remove unused function
The get_flash_nvram() function is unused, so remove it.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Henry Ptasinski [Mon, 9 May 2011 14:33:06 +0000 (16:33 +0200)]
staging: brcm80211: remove unneeded include path
No include files are needed from the util directory, so remove that directory
from the include path.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Henry Ptasinski [Mon, 9 May 2011 14:33:05 +0000 (16:33 +0200)]
staging: brcm80211: remove unnecessary header file
This header file is no longer needed.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Henry Ptasinski [Mon, 9 May 2011 14:33:04 +0000 (16:33 +0200)]
staging: brcm80211: delete unneeded files
This files are no longer needed.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Henry Ptasinski [Mon, 9 May 2011 14:33:03 +0000 (16:33 +0200)]
staging: brcm80211: move files only used by brcmsmac into appropriate dir
A number of files in the util subdir are only used by the brcmsmac driver.
Move those files into the brcmsmac subdir instead, and do the necessary
Makefile updates to get the files from the new location.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Henry Ptasinski [Mon, 9 May 2011 14:33:02 +0000 (16:33 +0200)]
staging: brcm80211: move header file
Move the pci_core.h header file from util to include subdir, in preparation for
other moves and cleanup.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Henry Ptasinski [Mon, 9 May 2011 14:32:56 +0000 (16:32 +0200)]
staging: brcm80211: delete unused sbpcmcia.h file
This include file is no longer needed.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Henry Ptasinski [Mon, 9 May 2011 14:32:55 +0000 (16:32 +0200)]
staging: brcm80211: remove unused cis_hnbuvars
The cis_hnbuvars structure is completely unused, so it can be deleted.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Henry Ptasinski [Mon, 9 May 2011 14:32:54 +0000 (16:32 +0200)]
staging: brcm80211: use common pktq_flush functions
The softmac and fullmac drivers can use the same implementation of
pktq_flush(), so remove the unnecessary version.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Mon, 9 May 2011 14:32:53 +0000 (16:32 +0200)]
staging: brcm80211: fix perimeter locking in wl_ops_bss_info_changed
Several code path in the wl_ops_bss_info_changed() callback were not
using the perimeter lock. This gives potential of raise conditions
so lock/unlock calls have been added.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Reviewed-by: Roland Vossen <rvossen@broadcoom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Javier M. Mellid [Sat, 7 May 2011 01:11:58 +0000 (03:11 +0200)]
staging: sm7xx: Use kernel framebuffer mode setting
This patch implements dynamic framebuffer mode setting.
Previous code works with mode setting in a hard code way. Previous hard
code configuration is used as default configuration if dynamic mode
setting or boot mode setting (via sm712vga_setup) is not used.
Tested with SM712 supporting 1024x600x16 as default hardware resolution.
Changes:
- Implement fb_check_var and fb_set_par callbacks
- Remove __maybe_unused decorator in function being used (sm712vga_setup)
- Minor cleanup on initialization structs related with mode settings
- Updated author copyright
- Updated TODO file
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:56 +0000 (03:47 -0700)]
staging: usbip: fixup MODULE_ macros
Modify description and email address for usbip_common_mod; export
module version number; and modify __init messages slightly.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:55 +0000 (03:47 -0700)]
staging: usbip: remove section dividers
Also, removes the one-line comments that were associated with some of
the dividers because they provided no additional information.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:54 +0000 (03:47 -0700)]
staging: usbip: add break to default case in switch statements
For consistency, a break statement is added to all default cases that
do not jump to a label.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:53 +0000 (03:47 -0700)]
staging: usbip: vhci_tx.c: coding style cleanup
Fix a few alignment issues and remove extraneous lines.
Use ternary operator for pdup->base.direction assignment.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:52 +0000 (03:47 -0700)]
staging: usbip: vhci_sysfs.c: coding style cleanup
Fix a few alignment issues and remove extraneous lines.
Add braces to else clause.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:51 +0000 (03:47 -0700)]
staging: usbip: vhci_rx.c: coding style cleanup
Fix alignment for consistency and remove extraneous lines.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:50 +0000 (03:47 -0700)]
staging: usbip: vhci_hcd.c: coding style cleanup
Fix alignment for consistency and remove extraneous lines.
Move MODULE_ macros to the end of file.
Make bit_desc[] an array of const pointers.
Add KERN_ level to a couple of printks.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:49 +0000 (03:47 -0700)]
staging: usbip: vhci.h: coding style cleanup
Fix a few alignment issues and remove extraneous lines.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:48 +0000 (03:47 -0700)]
staging: usbip: stub.h: coding style cleanup
Remove extraneous lines.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:47 +0000 (03:47 -0700)]
staging: usbip: usbip_event.c: coding style cleanup
Fix a few alignment issues and remove extraneous lines.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:46 +0000 (03:47 -0700)]
staging: usbip: usbip_common.c: coding style cleanup
Fix alignment for consistency, checkpatch.pl warning of line over
80 characters, and remove extraneous lines.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:45 +0000 (03:47 -0700)]
staging: usbip: usbip_common.h: coding style cleanup
Use the compiler macro __packed, fix a few alignment issues, and
remove extraneous lines.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:44 +0000 (03:47 -0700)]
staging: usbip: stub_tx.c: coding style cleanup
Fix alignment for consistency, checkpatch.pl warnings for lines
over 80 characters, remove extraneous lines, and change conversion
specifier within a format string to remove warning.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:43 +0000 (03:47 -0700)]
staging: usbip: stub_rx.c: coding style cleanup
Fix alignment for consistency and remove extraneous lines.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:42 +0000 (03:47 -0700)]
staging: usbip: stub_main.c: coding style cleanup
Fix alignment for consistency and remove extraneous lines.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
matt mooney [Fri, 6 May 2011 10:47:41 +0000 (03:47 -0700)]
staging: usbip: stub_dev.c: coding style cleanup
Fix alignment for consistency and remove extraneous lines.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Guilherme Salazar [Wed, 4 May 2011 04:38:30 +0000 (01:38 -0300)]
Staging: brcm80211: fix brace coding style issue in dhd_cdc.c
This is a patch that fixes up a brace issue found by the checkpatch.pl
tool
Signed-off-by: Guilherme Salazar <salazartux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Wed, 4 May 2011 08:53:56 +0000 (14:23 +0530)]
ath6kl: Remove ununsed macros from gpio_reg.h
After this there is no difference between hw2.0/hw/gpio_reg.h
and hw4.0/hw/gpio_reg.h, so remove the duplication.
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Wed, 4 May 2011 08:53:55 +0000 (14:23 +0530)]
ath6kl: Remove gpio.h and gpio_api.h
The macros and function proto types in these files are
not used anywhere.
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Wed, 4 May 2011 08:53:54 +0000 (14:23 +0530)]
ath6kl: Remove unused eeprom.c
Also delete si_reg.h which is only used in eeprom.c
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Wed, 4 May 2011 08:53:53 +0000 (14:23 +0530)]
ath6kl: Remove dead code with CONFIG_AR6002_REV1_FORCE_HOST
This is not defined anywhere, also delete vmc_reg.h which is
used only in the dead code.
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Wed, 4 May 2011 08:53:52 +0000 (14:23 +0530)]
ath6kl: Remove somemore unused header files
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Fri, 6 May 2011 15:48:27 +0000 (16:48 +0100)]
gma500: The MID devices have the register offset different
This is another small step towards getting Moorestown/Oaktrail support to
work but for Moorestown at least we still need to sort out GEM backed base
framebuffer, which means figuring out why GEM explodes early on at the
moment.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger [Thu, 5 May 2011 23:52:56 +0000 (18:52 -0500)]
staging: vt6655: Fix warnings if CONFIG_PM is not defined
If staging:vt6655 is built without CONFIG_DM being defined, there are large
numbers of warnings of the following form due to use of #if instead of #ifdef:
In file included from drivers/staging/vt6655/upc.h:32,
from drivers/staging/vt6655/mac.h:39,
from drivers/staging/vt6655/wroute.c:34:
drivers/staging/vt6655/device.h:399:5: warning: "CONFIG_PM" is not defined
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Grant Grundler [Wed, 4 May 2011 16:59:47 +0000 (09:59 -0700)]
staging: brcm80211: SDIO/MMC cleanups
misc coding style cleanups to dhd_sdio/sdmmc
o replace PKTFREE2 macro with static dhdsdio_pktfree2()
o drop "delta" local var
o drop GSPI_PR55150_BAILOUT
o reformat some of the comments (white space changes)
o drop dhd_bcmsdh_recv_buf wrapper and directly call bcmsdh_recv_buf
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Wed, 4 May 2011 18:51:45 +0000 (11:51 -0700)]
Staging: hv: Add the necessary dependencies to hyperv Kconfig
The vmbus driver dependes on ACPI and PCI subsystems. Change
Kconfig to reflect this.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
pefoley2@verizon.net [Tue, 3 May 2011 21:40:30 +0000 (17:40 -0400)]
staging: hv: make HYPERV_UTILS depend on NLS to prevent a build error
When HYPERV_UTILS=y and NLS=n the build fails with this error:
MODPOST 3 modules
ERROR: "utf8s_to_utf16s" [drivers/staging/hv/hv_utils.ko] undefined!
This patch fixes this by adding a dependency on NLS to HYPERV_UTILS.
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:16 +0000 (13:45 -0700)]
Staging: hv: Get rid of an unused variable from struct hv_driver
The name field is unused in struct hv_driver. Get rid of it.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:15 +0000 (13:45 -0700)]
Staging: hv: VMBUS is a acpi enumerated device; get irq value from bios
On some Windows hosts, the Linux PCI sub-system is not
allocating irq resources to the
vmbus driver. It looks like VMBUS is an ACPI enumerated device.
Retrieve the irq information from DSDT.
Currently we use this bios specified irq, if the PCI
sub-system fails to allocate the irq.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:14 +0000 (13:45 -0700)]
Staging: hv: Use the shutdown() function in struct hv_driver
Use the newly introduced shutdown() function.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:13 +0000 (13:45 -0700)]
Staging: hv: Add shutdown() function to struct hv_driver
Add shutdown() function to struct hv_driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:12 +0000 (13:45 -0700)]
Staging: hv: Use the remove() function in struct hv_driver
Use the newly introduced remove() function in struct hv_driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:11 +0000 (13:45 -0700)]
Staging: hv: Add remove() function to struct hv_driver
Add remove() function to struct hv_driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:10 +0000 (13:45 -0700)]
Staging: hv: Use the probe function in struct hv_driver
Use the newly introduced probe function.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:09 +0000 (13:45 -0700)]
Staging: hv: Add probe function to struct hv_driver
Add probe function to struct hv_driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:08 +0000 (13:45 -0700)]
Staging: hv: Get rid of struct hv_bus
Now, get rid of struct hv_bus. We will no longer be embedding
struct bus_type.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:07 +0000 (13:45 -0700)]
Staging: hv: Make event_dpc a stand alone variable
In preparation for getting rid of struct hv_bus, Make event_dpc a
stand alone variable.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:06 +0000 (13:45 -0700)]
Staging: hv: Make msg_dpc a stand alone variable
In preparation for cleaning up (getting rid of) of the hv_bus structure,
make msg_dpc a stand alone variable.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:05 +0000 (13:45 -0700)]
Staging: hv: Make hv_pci_dev a static variable
Make hv_pci_dev a static variable.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:04 +0000 (13:45 -0700)]
Staging: hv: Properly handle errors in hv_pci_probe()
Much of the vmbus driver initialization is done within the hv_pci_probe()
function. Properly handle errors in hv_pci_probe so that we can
appropriately deal with loading of the vmbus driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:03 +0000 (13:45 -0700)]
Staging: hv: Cleanup vmbus_probe() function
The logic for handling probe failure was broken. Now that we have
cleaned up error handling, get rid of the vmbus_probe_failed_cb()
function.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:02 +0000 (13:45 -0700)]
Staging: hv: Cleanup error handling in vmbus_child_device_register()
Cleanup error handling in vmbus_child_device_register().
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:01 +0000 (13:45 -0700)]
Staging: hv: Get rid of the drv field in struct hv_device
Now, we can rid of the drv field in struct hv_device.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:00 +0000 (13:45 -0700)]
Staging: hv: Get rid of vmbus_release_unattached_channels() as it is not used
Since vmbus_release_unattached_channels() is only used in module
unload path and since the vmbus driver cannot be unloaded,
get rid of this "dead" code.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:44:59 +0000 (13:44 -0700)]
Staging: hv: vmbus_driver cannot be unloaded; cleanup accordingly
The vmbus driver cannot be unloaded; the windows host does not
permit this: A) All guest resources given to the host cannot
be recovered and B) Windows host does not permit reloading the
vmbus_driver without re-booting the guest. Both these issues
are host related. Acknowledge this reality and cleanup the
vmbus driver accordingly. Note that, ideally we will want to handle
the root device through the Hyper-V block driver. In this case
unloading the vmbus driver will not be possible because of the
dependency issues.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cho, Yu-Chen [Tue, 3 May 2011 09:53:35 +0000 (17:53 +0800)]
staging/rts_pstor: fix Polling thread wakeups CPU
RealTek PCI-E Card Reader rts_pstor driver causes CPU wakeup very
frequently, thatt's bad for power consumption.
Signed-off-by: Cho, Yu-Chen <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:36:01 +0000 (11:36 +0200)]
staging: brcm80211: removed function wlc_calloc()
Code cleanup. After the previous patches, this function does not have
any added value anymore.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:36:00 +0000 (11:36 +0200)]
staging: brcm80211: got rid of WL_FFPLD message log macro
Code cleanup. Partially removed, remaining replaced with BCMMSG.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:59 +0000 (11:35 +0200)]
staging: brcm80211: replaced WL_AMPDU_* with BCMMSG
Remove WL_AMPDU_* tracing macros with BCMMSG as it does not need to
be so specific.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:58 +0000 (11:35 +0200)]
staging: brcm80211: replaced WL_TRACE by BCMMSG
Code cleanup. Make code more readable by converting different macro's
(WL_TRACE, WL_AMPDU, etc) into one BCMMSG. This single macro uses wiphy_err()
instead of printk(), so the user is able to correlate a log
message to our driver. This patch only replaces WL_TRACE, subsequent patches
will replace WL_AMPDU etc.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:57 +0000 (11:35 +0200)]
staging: brcm80211: remove unused functions from wlc_phy_qmath.c
The phy code only uses a subset of functions in wlc_phy_qmath.c and
the remaining are unused so those have been removed to cleanup the
codebase.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:56 +0000 (11:35 +0200)]
staging: brcm80211: move qmath sources to phy directory
The functions provided by qmath sources are only used by the
phy source code so qmath sources have been moved there.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:55 +0000 (11:35 +0200)]
staging: brcm80211: remove CRC_INNER_LOOP macro
With the removal of hndcrc16 and hndcrc32 this macro is not needed
anymore. Also the crc-ccitt library functions provide an equivalent
static inline function for this operation.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:54 +0000 (11:35 +0200)]
staging: brcm80211: remove unused hndcrc32 function
hndcrc32 is not used so it is removed from the driver codebase.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:53 +0000 (11:35 +0200)]
staging: brcm80211: replace hndcrc16 with crc-ccitt function
The implementation of hndcrc16 is identical to that of the crc-ccitt
function available in linux kernel library functions. The driver now
uses the crc-ccitt function.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:52 +0000 (11:35 +0200)]
staging: brcm80211: moved ASSERT logic to fullmac driver
Code cleanup. Softmac driver does not use ASSERTs anymore.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:51 +0000 (11:35 +0200)]
staging: brcm80211: removed ASSERTs from wlc_pmu.c
Code cleanup.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:50 +0000 (11:35 +0200)]
staging: brcm80211: removed ASSERTs from aiutils.c
Code cleanup.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:49 +0000 (11:35 +0200)]
staging: brcm80211: remove socitype member for struct si_pub definition
The attribute socitype is no longer required so it is removed here.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:48 +0000 (11:35 +0200)]
staging: brcm80211: use local variable for socitype during ai_scan
The SOC interface type is only needed to verify that we are accessing
a chip with AMBA AXI interconnect during ai_scan function. Therefor
this can be done with a local variable.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:47 +0000 (11:35 +0200)]
staging: brcm80211: remove check on interconnect type in ai_setcore
All functions in aiutils are only used for AI SOC interconnect chipsets
so no software check is needed other then during the ai_scan function.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>