platform/kernel/linux-starfive.git
4 years agoproc: proc_pid_ns takes super_block as an argument
Alexey Gladkov [Mon, 18 May 2020 18:07:38 +0000 (20:07 +0200)]
proc: proc_pid_ns takes super_block as an argument

syzbot found that

  touch /proc/testfile

causes NULL pointer dereference at tomoyo_get_local_path()
because inode of the dentry is NULL.

Before c59f415a7cb6, Tomoyo received pid_ns from proc's s_fs_info
directly. Since proc_pid_ns() can only work with inode, using it in
the tomoyo_get_local_path() was wrong.

To avoid creating more functions for getting proc_ns, change the
argument type of the proc_pid_ns() function. Then, Tomoyo can use
the existing super_block to get pid_ns.

Link: https://lkml.kernel.org/r/0000000000002f0c7505a5b0e04c@google.com
Link: https://lkml.kernel.org/r/20200518180738.2939611-1-gladkov.alexey@gmail.com
Reported-by: syzbot+c1af344512918c61362c@syzkaller.appspotmail.com
Fixes: c59f415a7cb6 ("Use proc_pid_ns() to get pid_namespace from the proc superblock")
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
4 years agoposix-cpu-timers: Use pids not tasks in lookup
Eric W. Biederman [Thu, 30 Apr 2020 11:43:44 +0000 (06:43 -0500)]
posix-cpu-timers: Use pids not tasks in lookup

The current posix-cpu-timer code uses pids when holding persistent
references in timers.  However the lookups from clock_id_t still return
tasks that need to be converted into pids for use.

This results in usage being pid->task->pid and that can race with
release_task and de_thread.  This can lead to some not wrong but
surprising results.  Surprising enough that Oleg and I both thought
there were some bugs in the code for a while.

This set of changes modifies the code to just lookup, verify, and return
pids from the clockid_t lookups to remove those potentialy troublesome
races.

Eric W. Biederman (3):
      posix-cpu-timers: Extend rcu_read_lock removing task_struct references
      posix-cpu-timers: Replace cpu_timer_pid_type with clock_pid_type
      posix-cpu-timers: Replace __get_task_for_clock with pid_for_clock

 kernel/time/posix-cpu-timers.c | 102 ++++++++++++++++++-----------------------
 1 file changed, 45 insertions(+), 57 deletions(-)

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoremove the no longer needed pid_alive() check in __task_pid_nr_ns()
Oleg Nesterov [Tue, 21 Apr 2020 10:19:04 +0000 (12:19 +0200)]
remove the no longer needed pid_alive() check in __task_pid_nr_ns()

Starting from 2c4704756cab ("pids: Move the pgrp and session pid pointers
from task_struct to signal_struct") __task_pid_nr_ns() doesn't dereference
task->group_leader, we can remove the pid_alive() check.

pid_nr_ns() has to check pid != NULL anyway, pid_alive() just adds the
unnecessary confusion.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
4 years agoRemoving has_group_leader_pid
Eric W. Biederman [Thu, 30 Apr 2020 11:18:01 +0000 (06:18 -0500)]
Removing has_group_leader_pid

With de_thread now calling exchange_tids has_group_leader_pid no longer
makes any sense and is equivalent to calling thread_group_leader.

As there are only 2 remaining users of has_group_leader_pid let's
update the code and get rid of has_group_leader_pid.

There is one extra patch to lookup_task that performs that unifies
to code paths that become identical when has_group_leader_pid went
away.

Eric W. Biederman (4):
      posix-cpu-timer: Tidy up group_leader logic in lookup_task
      posix-cpu-timer:  Unify the now redundant code in lookup_task
      exec: Remove BUG_ON(has_group_leader_pid)
      signal: Remove has_group_leader_pid

 fs/exec.c                      |  1 -
 include/linux/sched/signal.h   | 11 -----------
 kernel/time/posix-cpu-timers.c | 21 ++++++++-------------
 3 files changed, 8 insertions(+), 25 deletions(-)

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoposix-cpu-timers: Replace __get_task_for_clock with pid_for_clock
Eric W. Biederman [Mon, 27 Apr 2020 12:55:07 +0000 (07:55 -0500)]
posix-cpu-timers: Replace __get_task_for_clock with pid_for_clock

Now that the codes store references to pids instead of referendes to
tasks.  Looking up a task for a clock instead of looking up a struct
pid makes the code more difficult to verify it is correct than
necessary.

In posix_cpu_timers_create get_task_pid can race with release_task for
threads and return a NULL pid.  As put_pid and cpu_timer_task_rcu
handle NULL pids just fine the code works without problems but it is
an extra case to consider and keep in mind while verifying and
modifying the code.

There are races with de_thread to consider that only don't apply
because thread clocks are only allowed for threads in the same
thread_group.

So instead of leaving a burden for people making modification to the
code in the future return a rcu protected struct pid for the clock
instead.

The logic for __get_task_for_pid and lookup_task has been folded into
the new function pid_for_clock with the only change being the logic
has been modified from working on a task to working on a pid that
will be returned.

In posix_cpu_clock_get instead of calling pid_for_clock checking the
result and then calling pid_task to get the task.  The result of
pid_for_clock is fed directly into pid_task.  This is safe because
pid_task handles NULL pids.  As such an extra error check was
unnecessary.

Instead of hiding the flag that enables the special clock_gettime
handling, I have made the 3 callers just pass the flag in themselves.
That is less code and seems just as simple to work with as the
wrapper functions.

Historically the clock_gettime special case of allowing a process
clock to be found by the thread id did not even exist [33ab0fec3352]
but Thomas Gleixner reports that he has found code that uses that
functionality [55e8c8eb2c7b].

Link: https://lkml.kernel.org/r/87zhaxqkwa.fsf@nanos.tec.linutronix.de/
Ref: 33ab0fec3352 ("posix-timers: Consolidate posix_cpu_clock_get()")
Ref: 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a task")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoposix-cpu-timers: Replace cpu_timer_pid_type with clock_pid_type
Eric W. Biederman [Mon, 27 Apr 2020 14:38:29 +0000 (09:38 -0500)]
posix-cpu-timers: Replace cpu_timer_pid_type with clock_pid_type

Taking a clock and returning a pid_type is a more general and
a superset of taking a timer and returning a pid_type.

Perform this generalization so that future changes may use
this code on clocks as well as timers.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoposix-cpu-timers: Extend rcu_read_lock removing task_struct references
Eric W. Biederman [Sat, 25 Apr 2020 23:38:54 +0000 (18:38 -0500)]
posix-cpu-timers: Extend rcu_read_lock removing task_struct references

Now that the code stores of pid references it is no longer necessary
or desirable to take a reference on task_struct in __get_task_for_clock.

Instead extend the scope of rcu_read_lock and remove the reference
counting on struct task_struct entirely.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agosignal: Remove has_group_leader_pid
Eric W. Biederman [Sun, 26 Apr 2020 12:59:55 +0000 (07:59 -0500)]
signal: Remove has_group_leader_pid

After the introduction of exchange_tids has_group_leader_pid is
equivalent to thread_group_leader.  After the last couple of cleanups
has_group_leader_pid has no more callers.

So remove the now unused and redundant has_group_leader_pid.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoexec: Remove BUG_ON(has_group_leader_pid)
Eric W. Biederman [Sun, 26 Apr 2020 12:51:03 +0000 (07:51 -0500)]
exec: Remove BUG_ON(has_group_leader_pid)

With the introduction of exchange_tids thread_group_leader and
has_group_leader_pid have become equivalent.  Further at this point in the
code a thread group has exactly two threads, the previous thread_group_leader
that is waiting to be reaped and tsk.  So we know it is impossible for tsk to
be the thread_group_leader.

This is also the last user of has_group_leader_pid so removing this check
will allow has_group_leader_pid to be removed.

So remove the "BUG_ON(has_group_leader_pid)" that will never fire.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoposix-cpu-timer: Unify the now redundant code in lookup_task
Eric W. Biederman [Tue, 28 Apr 2020 18:00:39 +0000 (13:00 -0500)]
posix-cpu-timer:  Unify the now redundant code in lookup_task

Now that both !thread paths through lookup_task call
thread_group_leader, unify them into the single test at the end of
lookup_task.

This unification just makes it clear what is happening in the gettime
special case of lookup_task.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoposix-cpu-timer: Tidy up group_leader logic in lookup_task
Eric W. Biederman [Mon, 27 Apr 2020 19:32:54 +0000 (14:32 -0500)]
posix-cpu-timer: Tidy up group_leader logic in lookup_task

Replace has_group_leader_pid with thread_group_leader.  Years ago Oleg
suggested changing thread_group_leader to has_group_leader_pid to handle
races.  Looking at the code then and now I don't see how it ever helped.
Especially as then the code really did need to be the
thread_group_leader.

Today it doesn't make a difference if thread_group_leader races with
de_thread as the task returned from lookup_task in the non-thread case is
just used to find values in task->signal.

Since the races with de_thread have never been handled revert
has_group_header_pid to thread_group_leader for clarity.

Update the comment in lookup_task to remove implementation details that
are no longer true and to mention task->signal instead of task->sighand,
as the relevant cpu timer details are all in task->signal.

Ref: 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a task")
Ref: c0deae8c9587 ("posix-cpu-timers: Rcu_read_lock/unlock protect find_task_by_vpid call")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoproc: Ensure we see the exit of each process tid exactly
Eric W. Biederman [Tue, 28 Apr 2020 21:15:09 +0000 (16:15 -0500)]
proc: Ensure we see the exit of each process tid exactly

In the work to remove proc_mnt I noticed that we were calling
proc_flush_task now proc_flush_pid possibly multiple times for the same
pid because of how de_thread works.

This is a bare minimal patchset to sort out de_thread, by introducing
exchange_tids and the helper of exchange_tids hlists_swap_heads_rcu.

The actual call of exchange_tids should be slowpath so I have
prioritized readability over getting every last drop of performance.

I have also read through a bunch of the code to see if I could find
anything that would be affected by this change.  Users of
has_group_leader_pid were a good canidates.  But I also looked at other
cases that might have a pid->task->pid transition.  I ignored other
sources of races with de_thread and exec as those are preexisting.

I found a close call with send_signals user of task_active_pid_ns, but
all pids of a thread group are guaranteeds to be in the same pid
namespace so there is not a problem.

I found a few pieces of debugging code that do:

task = pid_task(pid, PIDTYPE_PID);
if (task) {
printk("%u\n", task->pid);
}

But I can't see how we care if it happens at the wrong moment that
task->pid might not match pid_nr(pid);

Similarly because the code in posix-cpu-timers goes pid->task->pid it
feels like there should be a problem.  But as the code that works with
PIDTYPE_PID is only available within the thread group, and as de_thread
kills all of the other threads before it makes any changes of this
kind the race can not happen.

In short I don't think this change will introduce any regressions.

Eric W. Biederman (2):
      rculist: Add hlists_swap_heads_rcu
      proc: Ensure we see the exit of each process tid exactly once

 fs/exec.c               |  5 +----
 include/linux/pid.h     |  1 +
 include/linux/rculist.h | 21 +++++++++++++++++++++
 kernel/pid.c            | 19 +++++++++++++++++++
 4 files changed, 42 insertions(+), 4 deletions(-)

Link: https://lore.kernel.org/lkml/87sggnajpv.fsf_-_@x220.int.ebiederm.org/
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoproc: Ensure we see the exit of each process tid exactly once
Eric W. Biederman [Sun, 19 Apr 2020 11:35:02 +0000 (06:35 -0500)]
proc: Ensure we see the exit of each process tid exactly once

When the thread group leader changes during exec and the old leaders
thread is reaped proc_flush_pid will flush the dentries for the entire
process because the leader still has it's original pid.

Fix this by exchanging the pids in an rcu safe manner,
and wrapping the code to do that up in a helper exchange_tids.

When I removed switch_exec_pids and introduced this behavior
in d73d65293e3e ("[PATCH] pidhash: kill switch_exec_pids") there
really was nothing that cared as flushing happened with
the cached dentry and de_thread flushed both of them on exec.

This lack of fully exchanging pids became a problem a few months later
when I introduced 48e6484d4902 ("[PATCH] proc: Rewrite the proc dentry
flush on exit optimization").  Which overlooked the de_thread case
was no longer swapping pids, and I was looking up proc dentries
by task->pid.

The current behavior isn't properly a bug as everything in proc will
continue to work correctly just a little bit less efficiently.  Fix
this just so there are no little surprise corner cases waiting to bite
people.

-- Oleg points out this could be an issue in next_tgid in proc where
   has_group_leader_pid is called, and reording some of the assignments
   should fix that.

-- Oleg points out this will break the 10 year old hack in __exit_signal.c
> /*
>  * This can only happen if the caller is de_thread().
>  * FIXME: this is the temporary hack, we should teach
>  * posix-cpu-timers to handle this case correctly.
>  */
> if (unlikely(has_group_leader_pid(tsk)))
> posix_cpu_timers_exit_group(tsk);

The code in next_tgid has been changed to use PIDTYPE_TGID,
and the posix cpu timers code has been fixed so it does not
need the 10 year old hack, so this should be safe to merge
now.

Link: https://lore.kernel.org/lkml/87h7x3ajll.fsf_-_@x220.int.ebiederm.org/
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Fixes: 48e6484d4902 ("[PATCH] proc: Rewrite the proc dentry flush on exit optimization").
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
4 years agorculist: Add hlists_swap_heads_rcu
Eric W. Biederman [Fri, 24 Apr 2020 16:19:10 +0000 (11:19 -0500)]
rculist: Add hlists_swap_heads_rcu

Using the struct pid to refer to two tasks in de_thread was a clever
idea and ultimately too clever, as it has lead to proc_flush_task
being called inconsistently.

To support rectifying this add hlists_swap_heads_rcu.  An hlist
primitive that just swaps the hlist heads of two lists.  This is
exactly what is needed for exchanging the pids of two tasks.

Only consideration of correctness of the code has been given,
as the caller is expected to be a slowpath.

Link: https://lore.kernel.org/lkml/87mu6vajnq.fsf_-_@x220.int.ebiederm.org/
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoproc: Use PIDTYPE_TGID in next_tgid
Eric W. Biederman [Tue, 25 Feb 2020 00:53:09 +0000 (18:53 -0600)]
proc: Use PIDTYPE_TGID in next_tgid

Combine the pid_task and thes test has_group_leader_pid into a single
dereference by using pid_task(PIDTYPE_TGID).

This makes the code simpler and proof against needing to even think
about any shenanigans that de_thread might get up to.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoproc: modernize proc to support multiple private instances
Eric W. Biederman [Fri, 24 Apr 2020 21:52:43 +0000 (16:52 -0500)]
proc: modernize proc to support multiple private instances

Alexey Gladkov <gladkov.alexey@gmail.com> writes:
 Procfs modernization:
 ---------------------
 Historically procfs was always tied to pid namespaces, during pid
 namespace creation we internally create a procfs mount for it. However,
 this has the effect that all new procfs mounts are just a mirror of the
 internal one, any change, any mount option update, any new future
 introduction will propagate to all other procfs mounts that are in the
 same pid namespace.

 This may have solved several use cases in that time. However today we
 face new requirements, and making procfs able to support new private
 instances inside same pid namespace seems a major point. If we want to
 to introduce new features and security mechanisms we have to make sure
 first that we do not break existing usecases. Supporting private procfs
 instances will allow to support new features and behaviour without
 propagating it to all other procfs mounts.

 Today procfs is more of a burden especially to some Embedded, IoT,
 sandbox, container use cases. In user space we are over-mounting null
 or inaccessible files on top to hide files and information. If we want
 to hide pids we have to create PID namespaces otherwise mount options
 propagate to all other proc mounts, changing a mount option value in one
 mount will propagate to all other proc mounts. If we want to introduce
 new features, then they will propagate to all other mounts too, resulting
 either maybe new useful functionality or maybe breaking stuff. We have
 also to note that userspace should not workaround procfs, the kernel
 should just provide a sane simple interface.

 In this regard several developers and maintainers pointed out that
 there are problems with procfs and it has to be modernized:

 "Here's another one: split up and modernize /proc." by Andy Lutomirski [1]

 Discussion about kernel pointer leaks:

 "And yes, as Kees and Daniel mentioned, it's definitely not just dmesg.
 In fact, the primary things tend to be /proc and /sys, not dmesg
 itself." By Linus Torvalds [2]

 Lot of other areas in the kernel and filesystems have been updated to be
 able to support private instances, devpts is one major example [3].

 Which will be used for:

 1) Embedded systems and IoT: usually we have one supervisor for
 apps, we have some lightweight sandbox support, however if we create
 pid namespaces we have to manage all the processes inside too,
 where our goal is to be able to run a bunch of apps each one inside
 its own mount namespace, maybe use network namespaces for vlans
 setups, but right now we only want mount namespaces, without all the
 other complexity. We want procfs to behave more like a real file system,
 and block access to inodes that belong to other users. The 'hidepid=' will
 not work since it is a shared mount option.

 2) Containers, sandboxes and Private instances of file systems - devpts case
 Historically, lot of file systems inside Linux kernel view when instantiated
 were just a mirror of an already created and mounted filesystem. This was the
 case of devpts filesystem, it seems at that time the requirements were to
 optimize things and reuse the same memory, etc. This design used to work but not
 anymore with today's containers, IoT, hostile environments and all the privacy
 challenges that Linux faces.

 In that regards, devpts was updated so that each new mounts is a total
 independent file system by the following patches:

 "devpts: Make each mount of devpts an independent filesystem" by
 Eric W. Biederman [3] [4]

 3) Linux Security Modules have multiple ptrace paths inside some
 subsystems, however inside procfs, the implementation does not guarantee
 that the ptrace() check which triggers the security_ptrace_check() hook
 will always run. We have the 'hidepid' mount option that can be used to
 force the ptrace_may_access() check inside has_pid_permissions() to run.
 The problem is that 'hidepid' is per pid namespace and not attached to
 the mount point, any remount or modification of 'hidepid' will propagate
 to all other procfs mounts.

 This also does not allow to support Yama LSM easily in desktop and user
 sessions. Yama ptrace scope which restricts ptrace and some other
 syscalls to be allowed only on inferiors, can be updated to have a
 per-task context, where the context will be inherited during fork(),
 clone() and preserved across execve(). If we support multiple private
 procfs instances, then we may force the ptrace_may_access() on
 /proc/<pids>/ to always run inside that new procfs instances. This will
 allow to specifiy on user sessions if we should populate procfs with
 pids that the user can ptrace or not.

 By using Yama ptrace scope, some restricted users will only be able to see
 inferiors inside /proc, they won't even be able to see their other
 processes. Some software like Chromium, Firefox's crash handler, Wine
 and others are already using Yama to restrict which processes can be
 ptracable. With this change this will give the possibility to restrict
 /proc/<pids>/ but more importantly this will give desktop users a
 generic and usuable way to specifiy which users should see all processes
 and which user can not.

 Side notes:

 * This covers the lack of seccomp where it is not able to parse
 arguments, it is easy to install a seccomp filter on direct syscalls
 that operate on pids, however /proc/<pid>/ is a Linux ABI using
 filesystem syscalls. With this change all LSMs should be able to analyze
 open/read/write/close... on /proc/<pid>/

 4) This will allow to implement new features either in kernel or
 userspace without having to worry about procfs.
 In containers, sandboxes, etc we have workarounds to hide some /proc
 inodes, this should be supported natively without doing extra complex
 work, the kernel should be able to support sane options that work with
 today and future Linux use cases.

 5) Creation of new superblock with all procfs options for each procfs
 mount will fix the ignoring of mount options. The problem is that the
 second mount of procfs in the same pid namespace ignores the mount
 options. The mount options are ignored without error until procfs is
 remounted.

 Before:

 proc /proc proc rw,relatime,hidepid=2 0 0

 mount("proc", "/tmp/proc", "proc", 0, "hidepid=1") = 0
 +++ exited with 0 +++

 proc /proc proc rw,relatime,hidepid=2 0 0
 proc /tmp/proc proc rw,relatime,hidepid=2 0 0

 proc /proc proc rw,relatime,hidepid=1 0 0
 proc /tmp/proc proc rw,relatime,hidepid=1 0 0

 After:

 proc /proc proc rw,relatime,hidepid=ptraceable 0 0

 proc /proc proc rw,relatime,hidepid=ptraceable 0 0
 proc /tmp/proc proc rw,relatime,hidepid=invisible 0 0

 Introduced changes:
 -------------------
 Each mount of procfs creates a separate procfs instance with its own
 mount options.

 This series adds few new mount options:

 * New 'hidepid=ptraceable' or 'hidepid=4' mount option to show only ptraceable
 processes in the procfs. This allows to support lightweight sandboxes in
 Embedded Linux, also solves the case for LSM where now with this mount option,
 we make sure that they have a ptrace path in procfs.

 * 'subset=pid' that allows to hide non-pid inodes from procfs. It can be used
 in containers and sandboxes, as these are already trying to hide and block
 access to procfs inodes anyway.

 ChangeLog:
 ----------
 * Rebase on top of v5.7-rc1.
 * Fix a resource leak if proc is not mounted or if proc is simply reconfigured.
 * Add few selftests.

 * After a discussion with Eric W. Biederman, the numerical values for hidepid
   parameter have been removed from uapi.
 * Remove proc_self and proc_thread_self from the pid_namespace struct.
 * I took into account the comment of Kees Cook.
 * Update Reviewed-by tags.

 * 'subset=pidfs' renamed to 'subset=pid' as suggested by Alexey Dobriyan.
 * Include Reviewed-by tags.

 * Rebase on top of Eric W. Biederman's procfs changes.
 * Add human readable values of 'hidepid' as suggested by Andy Lutomirski.

 * Started using RCU lock to clean dcache entries as suggested by Linus Torvalds.

 * 'pidonly=1' renamed to 'subset=pidfs' as suggested by Alexey Dobriyan.
 * HIDEPID_* moved to uapi/ as they are user interface to mount().
   Suggested-by Alexey Dobriyan <adobriyan@gmail.com>

 * 'hidepid=' and 'gid=' mount options are moved from pid namespace to superblock.
 * 'newinstance' mount option removed as suggested by Eric W. Biederman.
    Mount of procfs always creates a new instance.
 * 'limit_pids' renamed to 'hidepid=3'.
 * I took into account the comment of Linus Torvalds [7].
 * Documentation added.

 * Fixed a bug that caused a problem with the Fedora boot.
 * The 'pidonly' option is visible among the mount options.

 * Renamed mount options to 'newinstance' and 'pids='
Suggested-by: Andy Lutomirski <luto@kernel.org>
 * Fixed order of commit, Suggested-by: Andy Lutomirski <luto@kernel.org>
 * Many bug fixes.

 * Removed 'unshared' mount option and replaced it with 'limit_pids'
    which is attached to the current procfs mount.
    Suggested-by Andy Lutomirski <luto@kernel.org>
 * Do not fill dcache with pid entries that we can not ptrace.
 * Many bug fixes.

 References:
 -----------
 [1] https://lists.linuxfoundation.org/pipermail/ksummit-discuss/2017-January/004215.html
 [2] http://www.openwall.com/lists/kernel-hardening/2017/10/05/5
 [3] https://lwn.net/Articles/689539/
 [4] http://lxr.free-electrons.com/source/Documentation/filesystems/devpts.txt?v=3.14
 [5] https://lkml.org/lkml/2017/5/2/407
 [6] https://lkml.org/lkml/2017/5/3/357
 [7] https://lkml.org/lkml/2018/5/11/505

 Alexey Gladkov (7):
   proc: rename struct proc_fs_info to proc_fs_opts
   proc: allow to mount many instances of proc in one pid namespace
   proc: instantiate only pids that we can ptrace on 'hidepid=4' mount
     option
   proc: add option to mount only a pids subset
   docs: proc: add documentation for "hidepid=4" and "subset=pid" options
     and new mount behavior
  proc: use human-readable values for hidepid
   proc: use named enums for better readability

  Documentation/filesystems/proc.rst            |  92 +++++++++---
  fs/proc/base.c                                |  48 +++++--
  fs/proc/generic.c                             |   9 ++
  fs/proc/inode.c                               |  30 +++-
  fs/proc/root.c                                | 131 +++++++++++++-----
  fs/proc/self.c                                |   6 +-
  fs/proc/thread_self.c                         |   6 +-
  fs/proc_namespace.c                           |  14 +-
  include/linux/pid_namespace.h                 |  12 --
  include/linux/proc_fs.h                       |  30 +++-
  tools/testing/selftests/proc/.gitignore       |   2 +
  tools/testing/selftests/proc/Makefile         |   2 +
  .../selftests/proc/proc-fsconfig-hidepid.c    |  50 +++++++
  .../selftests/proc/proc-multiple-procfs.c     |  48 +++++++
  14 files changed, 384 insertions(+), 96 deletions(-)
  create mode 100644 tools/testing/selftests/proc/proc-fsconfig-hidepid.c
  create mode 100644 tools/testing/selftests/proc/proc-multiple-procfs.c

Link: https://lore.kernel.org/lkml/20200419141057.621356-1-gladkov.alexey@gmail.com/
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoUse proc_pid_ns() to get pid_namespace from the proc superblock
Alexey Gladkov [Thu, 23 Apr 2020 20:03:10 +0000 (22:03 +0200)]
Use proc_pid_ns() to get pid_namespace from the proc superblock

To get pid_namespace from the procfs superblock should be used a special
helper. This will avoid errors when s_fs_info will change the type.

Link: https://lore.kernel.org/lkml/20200423200316.164518-3-gladkov.alexey@gmail.com/
Link: https://lore.kernel.org/lkml/20200423112858.95820-1-gladkov.alexey@gmail.com/
Link: https://lore.kernel.org/lkml/06B50A1C-406F-4057-BFA8-3A7729EA7469@lca.pw/
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
4 years agoproc: Put thread_pid in release_task not proc_flush_pid
Eric W. Biederman [Fri, 24 Apr 2020 20:41:20 +0000 (15:41 -0500)]
proc: Put thread_pid in release_task not proc_flush_pid

Oleg pointed out that in the unlikely event the kernel is compiled
with CONFIG_PROC_FS unset that release_task will now leak the pid.

Move the put_pid out of proc_flush_pid into release_task to fix this
and to guarantee I don't make that mistake again.

When possible it makes sense to keep get and put in the same function
so it can easily been seen how they pair up.

Fixes: 7bc3e6e55acf ("proc: Use a list of inodes to flush from proc")
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoproc: use named enums for better readability
Alexey Gladkov [Sun, 19 Apr 2020 14:10:57 +0000 (16:10 +0200)]
proc: use named enums for better readability

Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
4 years agoproc: use human-readable values for hidepid
Alexey Gladkov [Sun, 19 Apr 2020 14:10:56 +0000 (16:10 +0200)]
proc: use human-readable values for hidepid

The hidepid parameter values are becoming more and more and it becomes
difficult to remember what each new magic number means.

Backward compatibility is preserved since it is possible to specify
numerical value for the hidepid parameter. This does not break the
fsconfig since it is not possible to specify a numerical value through
it. All numeric values are converted to a string. The type
FSCONFIG_SET_BINARY cannot be used to indicate a numerical value.

Selftest has been added to verify this behavior.

Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
4 years agodocs: proc: add documentation for "hidepid=4" and "subset=pid" options and new mount...
Alexey Gladkov [Sun, 19 Apr 2020 14:10:55 +0000 (16:10 +0200)]
docs: proc: add documentation for "hidepid=4" and "subset=pid" options and new mount behavior

Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
4 years agoproc: add option to mount only a pids subset
Alexey Gladkov [Sun, 19 Apr 2020 14:10:54 +0000 (16:10 +0200)]
proc: add option to mount only a pids subset

This allows to hide all files and directories in the procfs that are not
related to tasks.

Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
4 years agoproc: instantiate only pids that we can ptrace on 'hidepid=4' mount option
Alexey Gladkov [Sun, 19 Apr 2020 14:10:53 +0000 (16:10 +0200)]
proc: instantiate only pids that we can ptrace on 'hidepid=4' mount option

If "hidepid=4" mount option is set then do not instantiate pids that
we can not ptrace. "hidepid=4" means that procfs should only contain
pids that the caller can ptrace.

Signed-off-by: Djalal Harouni <tixxdz@gmail.com>
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
4 years agoproc: allow to mount many instances of proc in one pid namespace
Alexey Gladkov [Sun, 19 Apr 2020 14:10:52 +0000 (16:10 +0200)]
proc: allow to mount many instances of proc in one pid namespace

This patch allows to have multiple procfs instances inside the
same pid namespace. The aim here is lightweight sandboxes, and to allow
that we have to modernize procfs internals.

1) The main aim of this work is to have on embedded systems one
supervisor for apps. Right now we have some lightweight sandbox support,
however if we create pid namespacess we have to manages all the
processes inside too, where our goal is to be able to run a bunch of
apps each one inside its own mount namespace without being able to
notice each other. We only want to use mount namespaces, and we want
procfs to behave more like a real mount point.

2) Linux Security Modules have multiple ptrace paths inside some
subsystems, however inside procfs, the implementation does not guarantee
that the ptrace() check which triggers the security_ptrace_check() hook
will always run. We have the 'hidepid' mount option that can be used to
force the ptrace_may_access() check inside has_pid_permissions() to run.
The problem is that 'hidepid' is per pid namespace and not attached to
the mount point, any remount or modification of 'hidepid' will propagate
to all other procfs mounts.

This also does not allow to support Yama LSM easily in desktop and user
sessions. Yama ptrace scope which restricts ptrace and some other
syscalls to be allowed only on inferiors, can be updated to have a
per-task context, where the context will be inherited during fork(),
clone() and preserved across execve(). If we support multiple private
procfs instances, then we may force the ptrace_may_access() on
/proc/<pids>/ to always run inside that new procfs instances. This will
allow to specifiy on user sessions if we should populate procfs with
pids that the user can ptrace or not.

By using Yama ptrace scope, some restricted users will only be able to see
inferiors inside /proc, they won't even be able to see their other
processes. Some software like Chromium, Firefox's crash handler, Wine
and others are already using Yama to restrict which processes can be
ptracable. With this change this will give the possibility to restrict
/proc/<pids>/ but more importantly this will give desktop users a
generic and usuable way to specifiy which users should see all processes
and which users can not.

Side notes:
* This covers the lack of seccomp where it is not able to parse
arguments, it is easy to install a seccomp filter on direct syscalls
that operate on pids, however /proc/<pid>/ is a Linux ABI using
filesystem syscalls. With this change LSMs should be able to analyze
open/read/write/close...

In the new patch set version I removed the 'newinstance' option
as suggested by Eric W. Biederman.

Selftest has been added to verify new behavior.

Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
4 years agoproc: rename struct proc_fs_info to proc_fs_opts
Alexey Gladkov [Sun, 19 Apr 2020 14:10:51 +0000 (16:10 +0200)]
proc: rename struct proc_fs_info to proc_fs_opts

Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
4 years agosignal: Avoid corrupting si_pid and si_uid in do_notify_parent
Eric W. Biederman [Mon, 20 Apr 2020 16:41:50 +0000 (11:41 -0500)]
signal: Avoid corrupting si_pid and si_uid in do_notify_parent

Christof Meerwald <cmeerw@cmeerw.org> writes:
> Hi,
>
> this is probably related to commit
7a0cf094944e2540758b7f957eb6846d5126f535 (signal: Correct namespace
> fixups of si_pid and si_uid).
>
> With a 5.6.5 kernel I am seeing SIGCHLD signals that don't include a
> properly set si_pid field - this seems to happen for multi-threaded
> child processes.
>
> A simple test program (based on the sample from the signalfd man page):
>
> #include <sys/signalfd.h>
> #include <signal.h>
> #include <unistd.h>
> #include <spawn.h>
> #include <stdlib.h>
> #include <stdio.h>
>
> #define handle_error(msg) \
>     do { perror(msg); exit(EXIT_FAILURE); } while (0)
>
> int main(int argc, char *argv[])
> {
>   sigset_t mask;
>   int sfd;
>   struct signalfd_siginfo fdsi;
>   ssize_t s;
>
>   sigemptyset(&mask);
>   sigaddset(&mask, SIGCHLD);
>
>   if (sigprocmask(SIG_BLOCK, &mask, NULL) == -1)
>     handle_error("sigprocmask");
>
>   pid_t chldpid;
>   char *chldargv[] = { "./sfdclient", NULL };
>   posix_spawn(&chldpid, "./sfdclient", NULL, NULL, chldargv, NULL);
>
>   sfd = signalfd(-1, &mask, 0);
>   if (sfd == -1)
>     handle_error("signalfd");
>
>   for (;;) {
>     s = read(sfd, &fdsi, sizeof(struct signalfd_siginfo));
>     if (s != sizeof(struct signalfd_siginfo))
>       handle_error("read");
>
>     if (fdsi.ssi_signo == SIGCHLD) {
>       printf("Got SIGCHLD %d %d %d %d\n",
>           fdsi.ssi_status, fdsi.ssi_code,
>           fdsi.ssi_uid, fdsi.ssi_pid);
>       return 0;
>     } else {
>       printf("Read unexpected signal\n");
>     }
>   }
> }
>
>
> and a multi-threaded client to test with:
>
> #include <unistd.h>
> #include <pthread.h>
>
> void *f(void *arg)
> {
>   sleep(100);
> }
>
> int main()
> {
>   pthread_t t[8];
>
>   for (int i = 0; i != 8; ++i)
>   {
>     pthread_create(&t[i], NULL, f, NULL);
>   }
> }
>
> I tried to do a bit of debugging and what seems to be happening is
> that
>
>   /* From an ancestor pid namespace? */
>   if (!task_pid_nr_ns(current, task_active_pid_ns(t))) {
>
> fails inside task_pid_nr_ns because the check for "pid_alive" fails.
>
> This code seems to be called from do_notify_parent and there we
> actually have "tsk != current" (I am assuming both are threads of the
> current process?)

I instrumented the code with a warning and received the following backtrace:
> WARNING: CPU: 0 PID: 777 at kernel/pid.c:501 __task_pid_nr_ns.cold.6+0xc/0x15
> Modules linked in:
> CPU: 0 PID: 777 Comm: sfdclient Not tainted 5.7.0-rc1userns+ #2924
> Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
> RIP: 0010:__task_pid_nr_ns.cold.6+0xc/0x15
> Code: ff 66 90 48 83 ec 08 89 7c 24 04 48 8d 7e 08 48 8d 74 24 04 e8 9a b6 44 00 48 83 c4 08 c3 48 c7 c7 59 9f ac 82 e8 c2 c4 04 00 <0f> 0b e9 3fd
> RSP: 0018:ffffc9000042fbf8 EFLAGS: 00010046
> RAX: 000000000000000c RBX: 0000000000000000 RCX: ffffc9000042faf4
> RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81193d29
> RBP: ffffc9000042fc18 R08: 0000000000000000 R09: 0000000000000001
> R10: 000000100f938416 R11: 0000000000000309 R12: ffff8880b941c140
> R13: 0000000000000000 R14: 0000000000000000 R15: ffff8880b941c140
> FS:  0000000000000000(0000) GS:ffff8880bca00000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007f2e8c0a32e0 CR3: 0000000002e10000 CR4: 00000000000006f0
> Call Trace:
>  send_signal+0x1c8/0x310
>  do_notify_parent+0x50f/0x550
>  release_task.part.21+0x4fd/0x620
>  do_exit+0x6f6/0xaf0
>  do_group_exit+0x42/0xb0
>  get_signal+0x13b/0xbb0
>  do_signal+0x2b/0x670
>  ? __audit_syscall_exit+0x24d/0x2b0
>  ? rcu_read_lock_sched_held+0x4d/0x60
>  ? kfree+0x24c/0x2b0
>  do_syscall_64+0x176/0x640
>  ? trace_hardirqs_off_thunk+0x1a/0x1c
>  entry_SYSCALL_64_after_hwframe+0x49/0xb3

The immediate problem is as Christof noticed that "pid_alive(current) == false".
This happens because do_notify_parent is called from the last thread to exit
in a process after that thread has been reaped.

The bigger issue is that do_notify_parent can be called from any
process that manages to wait on a thread of a multi-threaded process
from wait_task_zombie.  So any logic based upon current for
do_notify_parent is just nonsense, as current can be pretty much
anything.

So change do_notify_parent to call __send_signal directly.

Inspecting the code it appears this problem has existed since the pid
namespace support started handling this case in 2.6.30.  This fix only
backports to 7a0cf094944e ("signal: Correct namespace fixups of si_pid and si_uid")
where the problem logic was moved out of __send_signal and into send_signal.

Cc: stable@vger.kernel.org
Fixes: 6588c1e3ff01 ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary")
Ref: 921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals")
Link: https://lore.kernel.org/lkml/20200419201336.GI22017@edge.cmeerw.net/
Reported-by: Christof Meerwald <cmeerw@cmeerw.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoproc: Handle umounts cleanly
Eric W. Biederman [Wed, 15 Apr 2020 17:37:27 +0000 (12:37 -0500)]
proc: Handle umounts cleanly

syzbot writes:
> KASAN: use-after-free Read in dput (2)
>
> proc_fill_super: allocate dentry failed
> ==================================================================
> BUG: KASAN: use-after-free in fast_dput fs/dcache.c:727 [inline]
> BUG: KASAN: use-after-free in dput+0x53e/0xdf0 fs/dcache.c:846
> Read of size 4 at addr ffff88808a618cf0 by task syz-executor.0/8426
>
> CPU: 0 PID: 8426 Comm: syz-executor.0 Not tainted 5.6.0-next-20200412-syzkaller #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
> Call Trace:
>  __dump_stack lib/dump_stack.c:77 [inline]
>  dump_stack+0x188/0x20d lib/dump_stack.c:118
>  print_address_description.constprop.0.cold+0xd3/0x315 mm/kasan/report.c:382
>  __kasan_report.cold+0x35/0x4d mm/kasan/report.c:511
>  kasan_report+0x33/0x50 mm/kasan/common.c:625
>  fast_dput fs/dcache.c:727 [inline]
>  dput+0x53e/0xdf0 fs/dcache.c:846
>  proc_kill_sb+0x73/0xf0 fs/proc/root.c:195
>  deactivate_locked_super+0x8c/0xf0 fs/super.c:335
>  vfs_get_super+0x258/0x2d0 fs/super.c:1212
>  vfs_get_tree+0x89/0x2f0 fs/super.c:1547
>  do_new_mount fs/namespace.c:2813 [inline]
>  do_mount+0x1306/0x1b30 fs/namespace.c:3138
>  __do_sys_mount fs/namespace.c:3347 [inline]
>  __se_sys_mount fs/namespace.c:3324 [inline]
>  __x64_sys_mount+0x18f/0x230 fs/namespace.c:3324
>  do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
>  entry_SYSCALL_64_after_hwframe+0x49/0xb3
> RIP: 0033:0x45c889
> Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
> RSP: 002b:00007ffc1930ec48 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
> RAX: ffffffffffffffda RBX: 0000000001324914 RCX: 000000000045c889
> RDX: 0000000020000140 RSI: 0000000020000040 RDI: 0000000000000000
> RBP: 000000000076bf00 R08: 0000000000000000 R09: 0000000000000000
> R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
> R13: 0000000000000749 R14: 00000000004ca15a R15: 0000000000000013

Looking at the code now that it the internal mount of proc is no
longer used it is possible to unmount proc.   If proc is unmounted
the fields of the pid namespace that were used for filesystem
specific state are not reinitialized.

Which means that proc_self and proc_thread_self can be pointers to
already freed dentries.

The reported user after free appears to be from mounting and
unmounting proc followed by mounting proc again and using error
injection to cause the new root dentry allocation to fail.  This in
turn results in proc_kill_sb running with proc_self and
proc_thread_self still retaining their values from the previous mount
of proc.  Then calling dput on either proc_self of proc_thread_self
will result in double put.  Which KASAN sees as a use after free.

Solve this by always reinitializing the filesystem state stored
in the struct pid_namespace, when proc is unmounted.

Reported-by: syzbot+72868dd424eb66c6b95f@syzkaller.appspotmail.com
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Fixes: 69879c01a0c3 ("proc: Remove the now unnecessary internal mount of proc")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
4 years agoLinux 5.7-rc1
Linus Torvalds [Sun, 12 Apr 2020 19:35:55 +0000 (12:35 -0700)]
Linux 5.7-rc1

4 years agoMAINTAINERS: sort field names for all entries
Linus Torvalds [Sun, 12 Apr 2020 18:04:58 +0000 (11:04 -0700)]
MAINTAINERS: sort field names for all entries

This sorts the actual field names too, potentially causing even more
chaos and confusion at merge time if you have edited the MAINTAINERS
file.  But the end result is a more consistent layout, and hopefully
it's a one-time pain minimized by doing this just before the -rc1
release.

This was entirely scripted:

  ./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order

Requested-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoMAINTAINERS: sort entries by entry name
Linus Torvalds [Sun, 12 Apr 2020 18:03:52 +0000 (11:03 -0700)]
MAINTAINERS: sort entries by entry name

They are all supposed to be sorted, but people who add new entries don't
always know the alphabet.  Plus sometimes the entry names get edited,
and people don't then re-order the entry.

Let's see how painful this will be for merging purposes (the MAINTAINERS
file is often edited in various different trees), but Joe claims there's
relatively few patches in -next that touch this, and doing it just
before -rc1 is likely the best time.  Fingers crossed.

This was scripted with

  /scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS

but then I also ended up manually upper-casing a few entry names that
stood out when looking at the end result.

Requested-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoMerge tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 12 Apr 2020 17:17:16 +0000 (10:17 -0700)]
Merge tag 'x86-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A set of three patches to fix the fallout of the newly added split
  lock detection feature.

  It addressed the case where a KVM guest triggers a split lock #AC and
  KVM reinjects it into the guest which is not prepared to handle it.

  Add proper sanity checks which prevent the unconditional injection
  into the guest and handles the #AC on the host side in the same way as
  user space detections are handled. Depending on the detection mode it
  either warns and disables detection for the task or kills the task if
  the mode is set to fatal"

* tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest
  KVM: x86: Emulate split-lock access as a write in emulator
  x86/split_lock: Provide handle_guest_split_lock()

4 years agoMerge tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 12 Apr 2020 17:13:14 +0000 (10:13 -0700)]
Merge tag 'timers-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip

Pull time(keeping) updates from Thomas Gleixner:

 - Fix the time_for_children symlink in /proc/$PID/ so it properly
   reflects that it part of the 'time' namespace

 - Add the missing userns limit for the allowed number of time
   namespaces, which was half defined but the actual array member was
   not added. This went unnoticed as the array has an exessive empty
   member at the end but introduced a user visible regression as the
   output was corrupted.

 - Prevent further silent ucount corruption by adding a BUILD_BUG_ON()
   to catch half updated data.

* tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ucount: Make sure ucounts in /proc/sys/user don't regress again
  time/namespace: Add max_time_namespaces ucount
  time/namespace: Fix time_for_children symlink

4 years agoMerge tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 12 Apr 2020 17:09:19 +0000 (10:09 -0700)]
Merge tag 'sched-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes/updates from Thomas Gleixner:

 - Deduplicate the average computations in the scheduler core and the
   fair class code.

 - Fix a raise between runtime distribution and assignement which can
   cause exceeding the quota by up to 70%.

 - Prevent negative results in the imbalanace calculation

 - Remove a stale warning in the workqueue code which can be triggered
   since the call site was moved out of preempt disabled code. It's a
   false positive.

 - Deduplicate the print macros for procfs

 - Add the ucmap values to the SCHED_DEBUG procfs output for completness

* tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Add task uclamp values to SCHED_DEBUG procfs
  sched/debug: Factor out printing formats into common macros
  sched/debug: Remove redundant macro define
  sched/core: Remove unused rq::last_load_update_tick
  workqueue: Remove the warning in wq_worker_sleeping()
  sched/fair: Fix negative imbalance in imbalance calculation
  sched/fair: Fix race between runtime distribution and assignment
  sched/fair: Align rq->avg_idle and rq->avg_scan_cost

4 years agoMerge tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 12 Apr 2020 17:05:24 +0000 (10:05 -0700)]
Merge tag 'perf-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
 "Three fixes/updates for perf:

   - Fix the perf event cgroup tracking which tries to track the cgroup
     even for disabled events.

   - Add Ice Lake server support for uncore events

   - Disable pagefaults when retrieving the physical address in the
     sampling code"

* tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Disable page faults when getting phys address
  perf/x86/intel/uncore: Add Ice Lake server uncore support
  perf/cgroup: Correct indirection in perf_less_group_idx()
  perf/core: Fix event cgroup tracking

4 years agoMerge tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 12 Apr 2020 16:47:10 +0000 (09:47 -0700)]
Merge tag 'locking-urgent-2020-04-12' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
 "Three small fixes/updates for the locking core code:

   - Plug a task struct reference leak in the percpu rswem
     implementation.

   - Document the refcount interaction with PID_MAX_LIMIT

   - Improve the 'invalid wait context' data dump in lockdep so it
     contains all information which is required to decode the problem"

* tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Improve 'invalid wait context' splat
  locking/refcount: Document interaction with PID_MAX_LIMIT
  locking/percpu-rwsem: Fix a task_struct refcount

4 years agoMerge tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Sun, 12 Apr 2020 16:41:01 +0000 (09:41 -0700)]
Merge tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Ten cifs/smb fixes:

   - five RDMA (smbdirect) related fixes

   - add experimental support for swap over SMB3 mounts

   - also a fix which improves performance of signed connections"

* tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: enable swap on SMB3 mounts
  smb3: change noisy error message to FYI
  smb3: smbdirect support can be configured by default
  cifs: smbd: Do not schedule work to send immediate packet on every receive
  cifs: smbd: Properly process errors on ib_post_send
  cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets
  cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending
  cifs: smbd: Check send queue size before posting a send
  cifs: smbd: Merge code to track pending packets
  cifs: ignore cached share root handle closing errors

4 years agoMerge tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Linus Torvalds [Sun, 12 Apr 2020 16:39:47 +0000 (09:39 -0700)]
Merge tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfix from Trond Myklebust:
 "Fix an RCU read lock leakage in pnfs_alloc_ds_commits_list()"

* tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  pNFS: Fix RCU lock leakage

4 years agoMerge tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan...
Linus Torvalds [Sat, 11 Apr 2020 18:38:44 +0000 (11:38 -0700)]
Merge tag 'nios2-v5.7-rc1' of git://git./linux/kernel/git/lftan/nios2

Pull nios2 updates from Ley Foon Tan:

 - Remove nios2-dev@lists.rocketboards.org from MAINTAINERS

 - remove 'resetvalue' property

 - rename 'altr,gpio-bank-width' -> 'altr,ngpio'

 - enable the common clk subsystem on Nios2

* tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  MAINTAINERS: Remove nios2-dev@lists.rocketboards.org
  arch: nios2: remove 'resetvalue' property
  arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio'
  arch: nios2: Enable the common clk subsystem on Nios2

4 years agoMerge tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping
Linus Torvalds [Sat, 11 Apr 2020 18:34:36 +0000 (11:34 -0700)]
Merge tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:

 - fix an integer truncation in dma_direct_get_required_mask
   (Kishon Vijay Abraham)

 - fix the display of dma mapping types (Grygorii Strashko)

* tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: fix displaying of dma allocation type
  dma-direct: fix data truncation in dma_direct_get_required_mask()

4 years agoMerge tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy...
Linus Torvalds [Sat, 11 Apr 2020 16:46:12 +0000 (09:46 -0700)]
Merge tag 'kbuild-v5.7-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - raise minimum supported binutils version to 2.23

 - remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports

 - move remaining CONFIG_AS_* tests to Kconfig from Makefile

 - enable -Wtautological-compare warnings to catch more issues

 - do not support GCC plugins for GCC <= 4.7

 - fix various breakages of 'make xconfig'

 - include the linker version used for linking the kernel into
   LINUX_COMPILER, which is used for the banner, and also exposed to
   /proc/version

 - link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
   allows us to remove the lib-ksyms.o workaround, and to solve the last
   known issue of the LLVM linker

 - add dummy tools in scripts/dummy-tools/ to enable all compiler tests
   in Kconfig, which will be useful for distro maintainers

 - support the single switch, LLVM=1 to use Clang and all LLVM utilities
   instead of GCC and Binutils.

 - support LLVM_IAS=1 to enable the integrated assembler, which is still
   experimental

* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
  kbuild: fix comment about missing include guard detection
  kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
  kbuild: replace AS=clang with LLVM_IAS=1
  kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
  kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
  MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
  kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
  kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
  Documentation/llvm: fix the name of llvm-size
  kbuild: mkcompile_h: Include $LD version in /proc/version
  kconfig: qconf: Fix a few alignment issues
  kconfig: qconf: remove some old bogus TODOs
  kconfig: qconf: fix support for the split view mode
  kconfig: qconf: fix the content of the main widget
  kconfig: qconf: Change title for the item window
  kconfig: qconf: clean deprecated warnings
  gcc-plugins: drop support for GCC <= 4.7
  kbuild: Enable -Wtautological-compare
  x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
  crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
  ...

4 years agomailmap: Add Sedat Dilek (replacement for expired email address)
Sedat Dilek [Sat, 11 Apr 2020 13:29:43 +0000 (15:29 +0200)]
mailmap: Add Sedat Dilek (replacement for expired email address)

I do not longer work for credativ Germany.

Please, use my private email address instead.

This is for the case when people want to CC me on
patches sent from my old business email address.

Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agopNFS: Fix RCU lock leakage
Trond Myklebust [Sat, 11 Apr 2020 15:37:18 +0000 (11:37 -0400)]
pNFS: Fix RCU lock leakage

Another brown paper bag moment. pnfs_alloc_ds_commits_list() is leaking
the RCU lock.

Fixes: a9901899b649 ("pNFS: Add infrastructure for cleaning up per-layout commit structures")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
4 years agoKVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest
Xiaoyao Li [Fri, 10 Apr 2020 11:54:02 +0000 (13:54 +0200)]
KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest

Two types of #AC can be generated in Intel CPUs:
 1. legacy alignment check #AC
 2. split lock #AC

Reflect #AC back into the guest if the guest has legacy alignment checks
enabled or if split lock detection is disabled.

If the #AC is not a legacy one and split lock detection is enabled, then
invoke handle_guest_split_lock() which will either warn and disable split
lock detection for this task or force SIGBUS on it.

[ tglx: Switch it to handle_guest_split_lock() and rename the misnamed
  helper function. ]

Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115517.176308876@linutronix.de
4 years agoKVM: x86: Emulate split-lock access as a write in emulator
Xiaoyao Li [Fri, 10 Apr 2020 11:54:01 +0000 (13:54 +0200)]
KVM: x86: Emulate split-lock access as a write in emulator

Emulate split-lock accesses as writes if split lock detection is on
to avoid #AC during emulation, which will result in a panic(). This
should never occur for a well-behaved guest, but a malicious guest can
manipulate the TLB to trigger emulation of a locked instruction[1].

More discussion can be found at [2][3].

[1] https://lkml.kernel.org/r/8c5b11c9-58df-38e7-a514-dc12d687b198@redhat.com
[2] https://lkml.kernel.org/r/20200131200134.GD18946@linux.intel.com
[3] https://lkml.kernel.org/r/20200227001117.GX9940@linux.intel.com

Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115517.084300242@linutronix.de
4 years agox86/split_lock: Provide handle_guest_split_lock()
Thomas Gleixner [Fri, 10 Apr 2020 11:54:00 +0000 (13:54 +0200)]
x86/split_lock: Provide handle_guest_split_lock()

Without at least minimal handling for split lock detection induced #AC,
VMX will just run into the same problem as the VMWare hypervisor, which
was reported by Kenneth.

It will inject the #AC blindly into the guest whether the guest is
prepared or not.

Provide a function for guest mode which acts depending on the host
SLD mode. If mode == sld_warn, treat it like user space, i.e. emit a
warning, disable SLD and mark the task accordingly. Otherwise force
SIGBUS.

 [ bp: Add a !CPU_SUP_INTEL stub for handle_guest_split_lock(). ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200410115516.978037132@linutronix.de
Link: https://lkml.kernel.org/r/20200402123258.895628824@linutronix.de
4 years agokbuild: fix comment about missing include guard detection
Masahiro Yamada [Wed, 8 Apr 2020 18:29:19 +0000 (03:29 +0900)]
kbuild: fix comment about missing include guard detection

The keyword here is 'twice' to explain the trick.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
4 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Sat, 11 Apr 2020 00:57:48 +0000 (17:57 -0700)]
Merge branch 'akpm' (patches from Andrew)

Merge yet more updates from Andrew Morton:

 - Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc,
   gup, hugetlb, pagemap, memremap)

 - Various other things (hfs, ocfs2, kmod, misc, seqfile)

* akpm: (34 commits)
  ipc/util.c: sysvipc_find_ipc() should increase position index
  kernel/gcov/fs.c: gcov_seq_next() should increase position index
  fs/seq_file.c: seq_read(): add info message about buggy .next functions
  drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
  change email address for Pali Rohár
  selftests: kmod: test disabling module autoloading
  selftests: kmod: fix handling test numbers above 9
  docs: admin-guide: document the kernel.modprobe sysctl
  fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
  kmod: make request_module() return an error when autoloading is disabled
  mm/memremap: set caching mode for PCI P2PDMA memory to WC
  mm/memory_hotplug: add pgprot_t to mhp_params
  powerpc/mm: thread pgprot_t through create_section_mapping()
  x86/mm: introduce __set_memory_prot()
  x86/mm: thread pgprot_t through init_memory_mapping()
  mm/memory_hotplug: rename mhp_restrictions to mhp_params
  mm/memory_hotplug: drop the flags field from struct mhp_restrictions
  mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
  mm/vma: introduce VM_ACCESS_FLAGS
  mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
  ...

4 years agoMerge tag 'docs-5.7-2' of git://git.lwn.net/linux
Linus Torvalds [Sat, 11 Apr 2020 00:53:43 +0000 (17:53 -0700)]
Merge tag 'docs-5.7-2' of git://git.lwn.net/linux

Pull Documentation fixes from Jonathan Corbet:
 "A handful of late-arriving fixes for the documentation tree"

* tag 'docs-5.7-2' of git://git.lwn.net/linux:
  Documentation: android: binderfs: add 'stats' mount option
  Documentation: driver-api/usb/writing_usb_driver.rst Updates documentation links
  docs: driver-api: address duplicate label warning
  Documentation: sysrq: fix RST formatting
  docs: kernel-parameters.txt: Fix broken references
  docs: kernel-parameters.txt: Remove nompx
  docs: filesystems: fix typo in qnx6.rst

4 years agoMerge tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubca...
Linus Torvalds [Sat, 11 Apr 2020 00:50:01 +0000 (17:50 -0700)]
Merge tag 'for-linus-5.7-ofs1' of git://git./linux/kernel/git/hubcap/linux

Pull orangefs updates from Mike Marshall:
 "A fix and two cleanups.

  Fix:

   - Christoph Hellwig noticed that some logic I added to
     orangefs_file_read_iter introduced a race condition, so he sent a
     reversion patch. I had to modify his patch since reverting at this
     point broke Orangefs.

  Cleanups:

   - Christoph Hellwig noticed that we were doing some unnecessary work
     in orangefs_flush, so he sent in a patch that removed the un-needed
     code.

   - Al Viro told me he had trouble building Orangefs. Orangefs should
     be easy to build, even for Al :-).

     I looked back at the test server build notes in orangefs.txt, just
     in case that's where the trouble really is, and found a couple of
     typos and made a couple of clarifications"

* tag 'for-linus-5.7-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: clarify build steps for test server in orangefs.txt
  orangefs: don't mess with I_DIRTY_TIMES in orangefs_flush
  orangefs: get rid of knob code...

4 years agoMerge tag 'xtensa-20200410' of git://github.com/jcmvbkbc/linux-xtensa
Linus Torvalds [Sat, 11 Apr 2020 00:39:20 +0000 (17:39 -0700)]
Merge tag 'xtensa-20200410' of git://github.com/jcmvbkbc/linux-xtensa

Pull xtensa updates from Max Filippov:

 - replace setup_irq() by request_irq()

 - cosmetic fixes in xtensa Kconfig and boot/Makefile

* tag 'xtensa-20200410' of git://github.com/jcmvbkbc/linux-xtensa:
  arch/xtensa: fix grammar in Kconfig help text
  xtensa: remove meaningless export ccflags-y
  xtensa: replace setup_irq() by request_irq()

4 years agoMerge tag 'for-linus-5.7-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 11 Apr 2020 00:20:06 +0000 (17:20 -0700)]
Merge tag 'for-linus-5.7-rc1b-tag' of git://git./linux/kernel/git/xen/tip

Pull more xen updates from Juergen Gross:

 - two cleanups

 - fix a boot regression introduced in this merge window

 - fix wrong use of memory allocation flags

* tag 'for-linus-5.7-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: fix booting 32-bit pv guest
  x86/xen: make xen_pvmmu_arch_setup() static
  xen/blkfront: fix memory allocation flags in blkfront_setup_indirect()
  xen: Use evtchn_type_t as a type for event channels

4 years agoipc/util.c: sysvipc_find_ipc() should increase position index
Vasily Averin [Fri, 10 Apr 2020 21:34:13 +0000 (14:34 -0700)]
ipc/util.c: sysvipc_find_ipc() should increase position index

If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/b7a20945-e315-8bb0-21e6-3875c14a8494@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agokernel/gcov/fs.c: gcov_seq_next() should increase position index
Vasily Averin [Fri, 10 Apr 2020 21:34:10 +0000 (14:34 -0700)]
kernel/gcov/fs.c: gcov_seq_next() should increase position index

If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Waiman Long <longman@redhat.com>
Link: http://lkml.kernel.org/r/f65c6ee7-bd00-f910-2f8a-37cc67e4ff88@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agofs/seq_file.c: seq_read(): add info message about buggy .next functions
Vasily Averin [Fri, 10 Apr 2020 21:34:06 +0000 (14:34 -0700)]
fs/seq_file.c: seq_read(): add info message about buggy .next functions

Patch series "seq_file .next functions should increase position index".

In Aug 2018 NeilBrown noticed commit 1f4aace60b0e ("fs/seq_file.c:
simplify seq_file iteration code and interface")

"Some ->next functions do not increment *pos when they return NULL...
Note that such ->next functions are buggy and should be fixed.  A simple
demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size
larger than the size of /proc/swaps.  This will always show the whole
last line of /proc/swaps"

Described problem is still actual.  If you make lseek into middle of
last output line following read will output end of last line and whole
last line once again.

  $ dd if=/proc/swaps bs=1  # usual output
  Filename Type Size Used Priority
  /dev/dm-0                             partition 4194812 97536 -2
  104+0 records in
  104+0 records out
  104 bytes copied

  $ dd if=/proc/swaps bs=40 skip=1    # last line was generated twice
  dd: /proc/swaps: cannot skip to specified offset
  v/dm-0                                partition 4194812 97536 -2
  /dev/dm-0                             partition 4194812 97536 -2
  3+1 records in
  3+1 records out
  131 bytes copied

There are lot of other affected files, I've found 30+ including
/proc/net/ip_tables_matches and /proc/sysvipc/*

I've sent patches into maillists of affected subsystems already, this
patch-set fixes the problem in files related to pstore, tracing, gcov,
sysvipc and other subsystems processed via linux-kernel@ mailing list
directly

https://bugzilla.kernel.org/show_bug.cgi?id=206283

This patch (of 4):

Add debug code to seq_read() to detect missed or out-of-tree incorrect
.next seq_file functions.

[akpm@linux-foundation.org: s/pr_info/pr_info_ratelimited/, per Qian Cai]
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: NeilBrown <neilb@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Waiman Long <longman@redhat.com>
Link: http://lkml.kernel.org/r/244674e5-760c-86bd-d08a-047042881748@virtuozzo.com
Link: http://lkml.kernel.org/r/7c24087c-e280-e580-5b0c-0cdaeb14cd18@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agodrivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
kbuild test robot [Fri, 10 Apr 2020 21:34:03 +0000 (14:34 -0700)]
drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings

Remove dev_err() messages after platform_get_irq*() failures.
platform_get_irq() already prints an error.

Generated by: scripts/coccinelle/api/platform_get_irq.cocci

Fixes: 6c41ac96ad92 ("dmaengine: tegra-apb: Support COMPILE_TEST")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Jon Hunter <jonathanh@nvidia.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2002271133450.2973@hadrien
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agochange email address for Pali Rohár
Pali Rohár [Fri, 10 Apr 2020 21:34:00 +0000 (14:34 -0700)]
change email address for Pali Rohár

For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.

People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.

[ Added .mailmap entry as per Joe Perches  - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoselftests: kmod: test disabling module autoloading
Eric Biggers [Fri, 10 Apr 2020 21:33:57 +0000 (14:33 -0700)]
selftests: kmod: test disabling module autoloading

Test that request_module() fails with -ENOENT when
/proc/sys/kernel/modprobe contains (a) a nonexistent path, and (b) an
empty path.

Case (b) is a regression test for the patch "kmod: make request_module()
return an error when autoloading is disabled".

Tested with 'kmod.sh -t 0010 && kmod.sh -t 0011', and also simply with
'kmod.sh' to run all kmod tests.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoselftests: kmod: fix handling test numbers above 9
Eric Biggers [Fri, 10 Apr 2020 21:33:53 +0000 (14:33 -0700)]
selftests: kmod: fix handling test numbers above 9

get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal.  Fix it by stripping the leading zeroes.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agodocs: admin-guide: document the kernel.modprobe sysctl
Eric Biggers [Fri, 10 Apr 2020 21:33:50 +0000 (14:33 -0700)]
docs: admin-guide: document the kernel.modprobe sysctl

Document the kernel.modprobe sysctl in the same place that all the other
kernel.* sysctls are documented.  Make sure to mention how to use this
sysctl to completely disable module autoloading, and how this sysctl
relates to CONFIG_STATIC_USERMODEHELPER.

[ebiggers@google.com: v5]
Link: http://lkml.kernel.org/r/20200318230515.171692-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-4-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agofs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
Eric Biggers [Fri, 10 Apr 2020 21:33:47 +0000 (14:33 -0700)]
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()

After request_module(), nothing is stopping the module from being
unloaded until someone takes a reference to it via try_get_module().

The WARN_ONCE() in get_fs_type() is thus user-reachable, via userspace
running 'rmmod' concurrently.

Since WARN_ONCE() is for kernel bugs only, not for user-reachable
situations, downgrade this warning to pr_warn_once().

Keep it printed once only, since the intent of this warning is to detect
a bug in modprobe at boot time.  Printing the warning more than once
wouldn't really provide any useful extra information.

Fixes: 41124db869b7 ("fs: warn in case userspace lied about modprobe return")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Cc: <stable@vger.kernel.org> [4.13+]
Link: http://lkml.kernel.org/r/20200312202552.241885-3-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agokmod: make request_module() return an error when autoloading is disabled
Eric Biggers [Fri, 10 Apr 2020 21:33:43 +0000 (14:33 -0700)]
kmod: make request_module() return an error when autoloading is disabled

Patch series "module autoloading fixes and cleanups", v5.

This series fixes a bug where request_module() was reporting success to
kernel code when module autoloading had been completely disabled via
'echo > /proc/sys/kernel/modprobe'.

It also addresses the issues raised on the original thread
(https://lkml.kernel.org/lkml/20200310223731.126894-1-ebiggers@kernel.org/T/#u)
bydocumenting the modprobe sysctl, adding a self-test for the empty path
case, and downgrading a user-reachable WARN_ONCE().

This patch (of 4):

It's long been possible to disable kernel module autoloading completely
(while still allowing manual module insertion) by setting
/proc/sys/kernel/modprobe to the empty string.

This can be preferable to setting it to a nonexistent file since it
avoids the overhead of an attempted execve(), avoids potential
deadlocks, and avoids the call to security_kernel_module_request() and
thus on SELinux-based systems eliminates the need to write SELinux rules
to dontaudit module_request.

However, when module autoloading is disabled in this way,
request_module() returns 0.  This is broken because callers expect 0 to
mean that the module was successfully loaded.

Apparently this was never noticed because this method of disabling
module autoloading isn't used much, and also most callers don't use the
return value of request_module() since it's always necessary to check
whether the module registered its functionality or not anyway.

But improperly returning 0 can indeed confuse a few callers, for example
get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit:

if (!fs && (request_module("fs-%.*s", len, name) == 0)) {
fs = __get_fs_type(name, len);
WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name);
}

This is easily reproduced with:

echo > /proc/sys/kernel/modprobe
mount -t NONEXISTENT none /

It causes:

request_module fs-NONEXISTENT succeeded, but still no fs?
WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0
[...]

This should actually use pr_warn_once() rather than WARN_ONCE(), since
it's also user-reachable if userspace immediately unloads the module.
Regardless, request_module() should correctly return an error when it
fails.  So let's make it return -ENOENT, which matches the error when
the modprobe binary doesn't exist.

I've also sent patches to document and test this case.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Ben Hutchings <benh@debian.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org
Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/memremap: set caching mode for PCI P2PDMA memory to WC
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:39 +0000 (14:33 -0700)]
mm/memremap: set caching mode for PCI P2PDMA memory to WC

PCI BAR IO memory should never be mapped as WB, however prior to this
the PAT bits were set WB and it was typically overridden by MTRR
registers set by the firmware.

Set PCI P2PDMA memory to be UC as this is what it currently, typically,
ends up being mapped as on x86 after the MTRR registers override the
cache setting.

Future use-cases may need to generalize this by adding flags to select
the caching type, as some P2PDMA cases may not want UC.  However, those
use-cases are not upstream yet and this can be changed when they arrive.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-8-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/memory_hotplug: add pgprot_t to mhp_params
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:36 +0000 (14:33 -0700)]
mm/memory_hotplug: add pgprot_t to mhp_params

devm_memremap_pages() is currently used by the PCI P2PDMA code to create
struct page mappings for IO memory.  At present, these mappings are
created with PAGE_KERNEL which implies setting the PAT bits to be WB.
However, on x86, an mtrr register will typically override this and force
the cache type to be UC-.  In the case firmware doesn't set this
register it is effectively WB and will typically result in a machine
check exception when it's accessed.

Other arches are not currently likely to function correctly seeing they
don't have any MTRR registers to fall back on.

To solve this, provide a way to specify the pgprot value explicitly to
arch_add_memory().

Of the arches that support MEMORY_HOTPLUG: x86_64, and arm64 need a
simple change to pass the pgprot_t down to their respective functions
which set up the page tables.  For x86_32, set the page tables
explicitly using _set_memory_prot() (seeing they are already mapped).

For ia64, s390 and sh, reject anything but PAGE_KERNEL settings -- this
should be fine, for now, seeing these architectures don't support
ZONE_DEVICE.

A check in __add_pages() is also added to ensure the pgprot parameter
was set for all arches.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-7-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agopowerpc/mm: thread pgprot_t through create_section_mapping()
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:32 +0000 (14:33 -0700)]
powerpc/mm: thread pgprot_t through create_section_mapping()

In prepartion to support a pgprot_t argument for arch_add_memory().

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-6-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agox86/mm: introduce __set_memory_prot()
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:28 +0000 (14:33 -0700)]
x86/mm: introduce __set_memory_prot()

For use in the 32bit arch_add_memory() to set the pgprot type of the
memory to add.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-5-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agox86/mm: thread pgprot_t through init_memory_mapping()
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:24 +0000 (14:33 -0700)]
x86/mm: thread pgprot_t through init_memory_mapping()

In preparation to support a pgprot_t argument for arch_add_memory().

It's required to move the prototype of init_memory_mapping() seeing the
original location came before the definition of pgprot_t.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-4-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/memory_hotplug: rename mhp_restrictions to mhp_params
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:21 +0000 (14:33 -0700)]
mm/memory_hotplug: rename mhp_restrictions to mhp_params

The mhp_restrictions struct really doesn't specify anything resembling a
restriction anymore so rename it to be mhp_params as it is a list of
extended parameters.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-3-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/memory_hotplug: drop the flags field from struct mhp_restrictions
Logan Gunthorpe [Fri, 10 Apr 2020 21:33:17 +0000 (14:33 -0700)]
mm/memory_hotplug: drop the flags field from struct mhp_restrictions

Patch series "Allow setting caching mode in arch_add_memory() for
P2PDMA", v4.

Currently, the page tables created using memremap_pages() are always
created with the PAGE_KERNEL cacheing mode.  However, the P2PDMA code is
creating pages for PCI BAR memory which should never be accessed through
the cache and instead use either WC or UC.  This still works in most
cases, on x86, because the MTRR registers typically override the caching
settings in the page tables for all of the IO memory to be UC-.
However, this tends not to work so well on other arches or some rare x86
machines that have firmware which does not setup the MTRR registers in
this way.

Instead of this, this series proposes a change to arch_add_memory() to
take the pgprot required by the mapping which allows us to explicitly
set pagetable entries for P2PDMA memory to UC.

This changes is pretty routine for most of the arches: x86_64, arm64 and
powerpc simply need to thread the pgprot through to where the page
tables are setup.  x86_32 unfortunately sets up the page tables at boot
so must use _set_memory_prot() to change their caching mode.  ia64, s390
and sh don't appear to have an easy way to change the page tables so,
for now at least, we just return -EINVAL on such mappings and thus they
will not support P2PDMA memory until the work for this is done.  This
should be fine as they don't yet support ZONE_DEVICE.

This patch (of 7):

This variable is not used anywhere and should therefore be removed from
the structure.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Badger <ebadger@gigaio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/20200306170846.9333-2-logang@deltatee.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/special: create generic fallbacks for pte_special() and pte_mkspecial()
Anshuman Khandual [Fri, 10 Apr 2020 21:33:13 +0000 (14:33 -0700)]
mm/special: create generic fallbacks for pte_special() and pte_mkspecial()

Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL
but required to define quite similar fallback stubs for special page
table entry helpers such as pte_special() and pte_mkspecial(), as they
get build in generic MM without a config check.  This creates two
generic fallback stub definitions for these helpers, eliminating much
code duplication.

mips platform has a special case where pte_special() and pte_mkspecial()
visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires.
This restricts those symbol visibility in order to avoid redefinitions
which is now exposed through this new generic stubs and subsequent build
failure.  arm platform set_pte_at() definition needs to be moved into a
C file just to prevent a build failure.

[anshuman.khandual@arm.com: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas]
Link: http://lkml.kernel.org/r/1583851924-21603-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Guo Ren <guoren@kernel.org> [csky]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Stafford Horne <shorne@gmail.com> [openrisc]
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: http://lkml.kernel.org/r/1583802551-15406-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/vma: introduce VM_ACCESS_FLAGS
Anshuman Khandual [Fri, 10 Apr 2020 21:33:09 +0000 (14:33 -0700)]
mm/vma: introduce VM_ACCESS_FLAGS

There are many places where all basic VMA access flags (read, write,
exec) are initialized or checked against as a group.  One such example
is during page fault.  Existing vma_is_accessible() wrapper already
creates the notion of VMA accessibility as a group access permissions.

Hence lets just create VM_ACCESS_FLAGS (VM_READ|VM_WRITE|VM_EXEC) which
will not only reduce code duplication but also extend the VMA
accessibility concept in general.

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Springer <rspringer@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/1583391014-8170-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
Anshuman Khandual [Fri, 10 Apr 2020 21:33:05 +0000 (14:33 -0700)]
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS

There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS
This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the
existing VM_STACK_DEFAULT_FLAGS.  While here, also define some more
macros with standard VMA access flag combinations that are used
frequently across many platforms.  Apart from simplification, this
reduces code duplication as well.

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/memory.c: add vm_insert_pages()
Arjun Roy [Fri, 10 Apr 2020 21:33:01 +0000 (14:33 -0700)]
mm/memory.c: add vm_insert_pages()

Add the ability to insert multiple pages at once to a user VM with lower
PTE spinlock operations.

The intention of this patch-set is to reduce atomic ops for tcp zerocopy
receives, which normally hits the same spinlock multiple times
consecutively.

[akpm@linux-foundation.org: pte_alloc() no longer takes the `addr' argument]
[arjunroy@google.com: add missing page_count() check to vm_insert_pages()]
Link: http://lkml.kernel.org/r/20200214005929.104481-1-arjunroy.kdev@gmail.com
[arjunroy@google.com: vm_insert_pages() checks if pte_index defined]
Link: http://lkml.kernel.org/r/20200228054714.204424-2-arjunroy.kdev@gmail.com
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200128025958.43490-2-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: define pte_index as macro for x86
Arjun Roy [Fri, 10 Apr 2020 21:32:58 +0000 (14:32 -0700)]
mm: define pte_index as macro for x86

pte_index() is either defined as a macro (e.g.  sparc64) or as an
inlined function (e.g.  x86).  vm_insert_pages() depends on pte_index
but it is not defined on all platforms (e.g.  m68k).

To fix compilation of vm_insert_pages() on architectures not providing
pte_index(), we perform the following fix:

0. For platforms where it is meaningful, and defined as a macro, no
    change is needed.
1. For platforms where it is meaningful and defined as an inlined
    function, and we want to use it with vm_insert_pages(), we define
    a degenerate macro of the form:  #define pte_index pte_index
2. vm_insert_pages() checks for the existence of a pte_index macro
   definition. If found, it implements a batched insert. If not found,
   it devolves to calling vm_insert_page() in a loop.

This patch implements step 1 for x86.

v3 of this patch fixes a compilation warning for an unused method.
v2 of this patch moved a macro definition to a more readable location.

Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200228054714.204424-1-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: bring sparc pte_index() semantics inline with other platforms
Arjun Roy [Fri, 10 Apr 2020 21:32:54 +0000 (14:32 -0700)]
mm: bring sparc pte_index() semantics inline with other platforms

pte_index() on platforms other than sparc return a numerical index.  On
sparc, it returns a pte_t*.  This presents an issue for
vm_insert_pages(), which relies on pte_index() to find the offset for a
pte within a pmd, for batched inserts.

This patch:
1. Modifies pte_index() for sparc to return a numerical index, like
   other platforms,
2. Defines pte_entry() for sparc which returns a pte_t*
   (as pte_index() used to),
3. Converts existing sparc callers for pte_index() to use pte_entry().

[sfr@canb.auug.org.au: remove pte_entry and just directly modified pte_offset_kernel instead]
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arjun Roy <arjunroy.kdev@gmail.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Link: http://lkml.kernel.org/r/20200227105045.6b421d9f@canb.auug.org.au
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/memory.c: refactor insert_page to prepare for batched-lock insert
Arjun Roy [Fri, 10 Apr 2020 21:32:51 +0000 (14:32 -0700)]
mm/memory.c: refactor insert_page to prepare for batched-lock insert

Add helper methods for vm_insert_page()/insert_page() to prepare for
vm_insert_pages(), which batch-inserts pages to reduce spinlock
operations when inserting multiple consecutive pages into the user page
table.

The intention of this patch-set is to reduce atomic ops for tcp zerocopy
receives, which normally hits the same spinlock multiple times
consecutively.

Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200128025958.43490-1-arjunroy.kdev@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/mmap.c: initialize align_offset explicitly for vm_unmapped_area
Jaewon Kim [Fri, 10 Apr 2020 21:32:48 +0000 (14:32 -0700)]
mm/mmap.c: initialize align_offset explicitly for vm_unmapped_area

On passing requirement to vm_unmapped_area, arch_get_unmapped_area and
arch_get_unmapped_area_topdown did not set align_offset.  Internally on
both unmapped_area and unmapped_area_topdown, if info->align_mask is 0,
then info->align_offset was meaningless.

But commit df529cabb7a2 ("mm: mmap: add trace point of
vm_unmapped_area") always prints info->align_offset even though it is
uninitialized.

Fix this uninitialized value issue by setting it to 0 explicitly.

Before:
  vm_unmapped_area: addr=0x755b155000 err=0 total_vm=0x15aaf0 flags=0x1 len=0x109000 lo=0x8000 hi=0x75eed48000 mask=0x0 ofs=0x4022

After:
  vm_unmapped_area: addr=0x74a4ca1000 err=0 total_vm=0x168ab1 flags=0x1 len=0x9000 lo=0x8000 hi=0x753d94b000 mask=0x0 ofs=0x0

Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20200409094035.19457-1-jaewon31.kim@samsung.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: hugetlb: optionally allocate gigantic hugepages using cma
Roman Gushchin [Fri, 10 Apr 2020 21:32:45 +0000 (14:32 -0700)]
mm: hugetlb: optionally allocate gigantic hugepages using cma

Commit 944d9fec8d7a ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.

However it actually works only at early stages of the system loading,
when the majority of memory is free.  After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero.  Even dropping caches manually doesn't
help a lot.

At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex.  At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.

The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
   as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
   cma allocator and the dedicated cma area

In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.

* On a multi-node machine a per-node cma area is allocated on each node.
  Following gigantic hugetlb allocation are using the first available
  numa node if the mask isn't specified by a user.

Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
   pass hugetlb_cma=10G as a kernel argument

2) allocate hugetlb pages as usual, e.g.
   echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages

If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.

x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.

The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap.  It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz.  Thanks!

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: cma: NUMA node interface
Aslan Bakirov [Fri, 10 Apr 2020 21:32:42 +0000 (14:32 -0700)]
mm: cma: NUMA node interface

I've noticed that there is no interface exposed by CMA which would let
me to declare contigous memory on particular NUMA node.

This patchset adds the ability to try to allocate contiguous memory on a
specific node.  It will fallback to other nodes if the specified one
doesn't work.

Implement a new method for declaring contigous memory on particular node
and keep cma_declare_contiguous() as a wrapper.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Aslan Bakirov <aslan@fb.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Andreas Schaufler <andreas.schaufler@gmx.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-2-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoocfs2: no need try to truncate file beyond i_size
Changwei Ge [Fri, 10 Apr 2020 21:32:38 +0000 (14:32 -0700)]
ocfs2: no need try to truncate file beyond i_size

Linux fallocate(2) with FALLOC_FL_PUNCH_HOLE mode set, its offset can
exceed the inode size.  Ocfs2 now doesn't allow that offset beyond inode
size.  This restriction is not necessary and violates fallocate(2)
semantics.

If fallocate(2) offset is beyond inode size, just return success and do
nothing further.

Otherwise, ocfs2 will crash the kernel.

  kernel BUG at fs/ocfs2//alloc.c:7264!
   ocfs2_truncate_inline+0x20f/0x360 [ocfs2]
   ocfs2_remove_inode_range+0x23c/0xcb0 [ocfs2]
   __ocfs2_change_file_space+0x4a5/0x650 [ocfs2]
   ocfs2_fallocate+0x83/0xa0 [ocfs2]
   vfs_fallocate+0x148/0x230
   SyS_fallocate+0x48/0x80
   do_syscall_64+0x79/0x170

Signed-off-by: Changwei Ge <chge@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200407082754.17565-1-chge@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/page_alloc: make pcpu_drain_mutex and pcpu_drain static
Jason Yan [Fri, 10 Apr 2020 21:32:32 +0000 (14:32 -0700)]
mm/page_alloc: make pcpu_drain_mutex and pcpu_drain static

Fix the following sparse warning:

  mm/page_alloc.c:106:1: warning: symbol 'pcpu_drain_mutex' was not declared. Should it be static?
  mm/page_alloc.c:107:1: warning: symbol '__pcpu_scope_pcpu_drain' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200407023925.46438-1-yanaijie@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/page_alloc.c: fix kernel-doc warning
Randy Dunlap [Fri, 10 Apr 2020 21:32:29 +0000 (14:32 -0700)]
mm/page_alloc.c: fix kernel-doc warning

Add description of function parameter 'mt' to fix kernel-doc warning:

  mm/page_alloc.c:3246: warning: Function parameter or member 'mt' not described in '__putback_isolated_page'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: http://lkml.kernel.org/r/02998bd4-0b82-2f15-2570-f86130304d1e@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agodocs: mm: slab.h: fix a broken cross-reference
Mauro Carvalho Chehab [Fri, 10 Apr 2020 21:32:25 +0000 (14:32 -0700)]
docs: mm: slab.h: fix a broken cross-reference

There is a typo at the cross-reference link, causing this warning:

  include/linux/slab.h:11: WARNING: undefined label: memory-allocation (if the link has no caption the label must precede a section header)

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/0aeac24235d356ebd935d11e147dcc6edbb6465c.1586359676.git.mchehab+huawei@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm, slab_common: fix a typo in comment "eariler"->"earlier"
Qiujun Huang [Fri, 10 Apr 2020 21:32:22 +0000 (14:32 -0700)]
mm, slab_common: fix a typo in comment "eariler"->"earlier"

There is a typo in comment, fix it.
s/eariler/earlier/

Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christoph Lameter <cl@linux.com>
Link: http://lkml.kernel.org/r/20200405160544.1246-1-hqjagain@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm, memcg: do not high throttle allocators based on wraparound
Jakub Kicinski [Fri, 10 Apr 2020 21:32:19 +0000 (14:32 -0700)]
mm, memcg: do not high throttle allocators based on wraparound

If a cgroup violates its memory.high constraints, we may end up unduly
penalising it.  For example, for the following hierarchy:

  A:   max high, 20 usage
  A/B: 9 high, 10 usage
  A/C: max high, 10 usage

We would end up doing the following calculation below when calculating
high delay for A/B:

  A/B: 10 - 9 = 1...
  A:   20 - PAGE_COUNTER_MAX = 21, so set max_overage to 21.

This gets worse with higher disparities in usage in the parent.

I have no idea how this disappeared from the final version of the patch,
but it is certainly Not Good(tm).  This wasn't obvious in testing because,
for a simple cgroup hierarchy with only one child, the result is usually
roughly the same.  It's only in more complex hierarchies that things go
really awry (although still, the effects are limited to a maximum of 2
seconds in schedule_timeout_killable at a maximum).

[chris@chrisdown.name: changelog]
Fixes: e26733e0d0ec ("mm, memcg: throttle allocators based on ancestral memory.high")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [5.4.x]
Link: http://lkml.kernel.org/r/20200331152424.GA1019937@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agohfsplus: fix crash and filesystem corruption when deleting files
Simon Gander [Fri, 10 Apr 2020 21:32:16 +0000 (14:32 -0700)]
hfsplus: fix crash and filesystem corruption when deleting files

When removing files containing extended attributes, the hfsplus driver may
remove the wrong entries from the attributes b-tree, causing major
filesystem damage and in some cases even kernel crashes.

To remove a file, all its extended attributes have to be removed as well.
The driver does this by looking up all keys in the attributes b-tree with
the cnid of the file.  Each of these entries then gets deleted using the
key used for searching, which doesn't contain the attribute's name when it
should.  Since the key doesn't contain the name, the deletion routine will
not find the correct entry and instead remove the one in front of it.  If
parent nodes have to be modified, these become corrupt as well.  This
causes invalid links and unsorted entries that not even macOS's fsck_hfs
is able to fix.

To fix this, modify the search key before an entry is deleted from the
attributes b-tree by copying the found entry's key into the search key,
therefore ensuring that the correct entry gets removed from the tree.

Signed-off-by: Simon Gander <simon@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoprintk: queue wake_up_klogd irq_work only if per-CPU areas are ready
Sergey Senozhatsky [Tue, 3 Mar 2020 11:30:02 +0000 (20:30 +0900)]
printk: queue wake_up_klogd irq_work only if per-CPU areas are ready

printk_deferred(), similarly to printk_safe/printk_nmi, does not
immediately attempt to print a new message on the consoles, avoiding
calls into non-reentrant kernel paths, e.g. scheduler or timekeeping,
which potentially can deadlock the system.

Those printk() flavors, instead, rely on per-CPU flush irq_work to print
messages from safer contexts.  For same reasons (recursive scheduler or
timekeeping calls) printk() uses per-CPU irq_work in order to wake up
user space syslog/kmsg readers.

However, only printk_safe/printk_nmi do make sure that per-CPU areas
have been initialised and that it's safe to modify per-CPU irq_work.
This means that, for instance, should printk_deferred() be invoked "too
early", that is before per-CPU areas are initialised, printk_deferred()
will perform illegal per-CPU access.

Lech Perczak [0] reports that after commit 1b710b1b10ef ("char/random:
silence a lockdep splat with printk()") user-space syslog/kmsg readers
are not able to read new kernel messages.

The reason is printk_deferred() being called too early (as was pointed
out by Petr and John).

Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU
areas are initialized.

Link: https://lore.kernel.org/lkml/aa0732c6-5c4e-8a8b-a1c1-75ebe3dca05b@camlintechnologies.com/
Reported-by: Lech Perczak <l.perczak@camlintechnologies.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Jann Horn <jannh@google.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm...
Linus Torvalds [Fri, 10 Apr 2020 19:59:56 +0000 (12:59 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull proc fix from Eric Biederman:
 "A brown paper bag slipped through my proc changes, and syzcaller
  caught it when the code ended up in your tree.

  I have opted to fix it the simplest cleanest way I know how, so there
  is no reasonable chance for the bug to repeat"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  proc: Use a dedicated lock in struct pid

4 years agoMerge tag 'pwm/for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry...
Linus Torvalds [Fri, 10 Apr 2020 19:55:20 +0000 (12:55 -0700)]
Merge tag 'pwm/for-5.7-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "There's quite a few changes this time around.

  Most of these are fixes and cleanups, but there's also new chip
  support for some drivers and a bit of rework"

* tag 'pwm/for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (33 commits)
  pwm: pca9685: Fix PWM/GPIO inter-operation
  pwm: Make pwm_apply_state_debug() static
  pwm: meson: Remove redundant assignment to variable fin_freq
  pwm: jz4740: Allow selection of PWM channels 0 and 1
  pwm: jz4740: Obtain regmap from parent node
  pwm: jz4740: Improve algorithm of clock calculation
  pwm: jz4740: Use clocks from TCU driver
  pwm: sun4i: Remove redundant needs_delay
  pwm: omap-dmtimer: Implement .apply callback
  pwm: omap-dmtimer: Do not disable PWM before changing period/duty_cycle
  pwm: omap-dmtimer: Fix PWM enabling sequence
  pwm: omap-dmtimer: Update description for PWM OMAP DM timer
  pwm: omap-dmtimer: Drop unused header file
  pwm: renesas-tpu: Drop confusing registered message
  pwm: renesas-tpu: Fix late Runtime PM enablement
  pwm: rcar: Fix late Runtime PM enablement
  dt-bindings: pwm: renesas-tpu: Document more R-Car Gen2 support
  pwm: meson: Fix confusing indentation
  pwm: pca9685: Use gpio core provided macro GPIO_LINE_DIRECTION_OUT
  pwm: pca9685: Replace CONFIG_PM with __maybe_unused
  ...

4 years agoMerge tag 'for-linus-5.7-1' of git://github.com/cminyard/linux-ipmi
Linus Torvalds [Fri, 10 Apr 2020 19:43:42 +0000 (12:43 -0700)]
Merge tag 'for-linus-5.7-1' of git://github.com/cminyard/linux-ipmi

Pull IPMI updates from Corey Minyard:
 "Bug fixes for main IPMI driver, kcs updates

  A couple of bug fixes for the main IPMI driver, one functional and two
  annotations.

  The kcs driver has some significant updates that have been pending for
  a while, but I forgot to include in next until a week ago. But this
  code is only used by the people who are sending it to me, really, so
  it's not a big deal. I did want it to sit in next for at least a week,
  and it did result in a fix"

* tag 'for-linus-5.7-1' of git://github.com/cminyard/linux-ipmi:
  ipmi: kcs: Fix aspeed_kcs_probe_of_v1()
  ipmi: Add missing annotation for ipmi_ssif_lock_cond() and ipmi_ssif_unlock_cond()
  ipmi: kcs: aspeed: Implement v2 bindings
  ipmi: kcs: Finish configuring ASPEED KCS device before enable
  dt-bindings: ipmi: aspeed: Introduce a v2 binding for KCS
  ipmi: fix hung processes in __get_guid()
  drivers: char: ipmi: ipmi_msghandler: Pass lockdep expression to RCU lists

4 years agoMerge tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Fri, 10 Apr 2020 19:38:28 +0000 (12:38 -0700)]
Merge tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drm

Pull more drm fixes from Dave Airlie:
 "As expected, more fixes did turn up in the latter part of the week.

  The drm_local_map build regression fix is here, along with temporary
  disabling of the hugepage work due to some amdgpu related crashes.

  Otherwise it's just a bunch of i915, and amdgpu fixes.

  legacy:
   - fix drm_local_map.offset type

  ttm:
   - temporarily disable hugepages to debug amdgpu problems.

  prime:
   - fix sg extraction

  amdgpu:
   - Various Renoir fixes
   - Fix gfx clockgating sequence on gfx10
   - RAS fixes
   - Avoid MST property creation after registration
   - Various cursor/viewport fixes
   - Fix a confusing log message about optional firmwares

  i915:
   - Flush all the reloc_gpu batch (Chris)
   - Ignore readonly failures when updating relocs (Chris)
   - Fill all the unused space in the GGTT (Chris)
   - Return the right vswing table (Jose)
   - Don't enable DDI IO power on a TypeC port in TBT mode for ICL+ (Imre)

  analogix_dp:
   - probe fix

  virtio:
   - oob fix in object create"

* tag 'drm-next-2020-04-10' of git://anongit.freedesktop.org/drm/drm: (34 commits)
  drm/ttm: Temporarily disable the huge_fault() callback
  drm/bridge: analogix_dp: Split bind() into probe() and real bind()
  drm/legacy: Fix type for drm_local_map.offset
  drm/amdgpu/display: fix warning when compiling without debugfs
  drm/amdgpu: unify fw_write_wait for new gfx9 asics
  drm/amd/powerplay: error out on forcing clock setting not supported
  drm/amdgpu: fix gfx hang during suspend with video playback (v2)
  drm/amd/display: Check for null fclk voltage when parsing clock table
  drm/amd/display: Acknowledge wm_optimized_required
  drm/amd/display: Make cursor source translation adjustment optional
  drm/amd/display: Calculate scaling ratios on every medium/full update
  drm/amd/display: Program viewport when source pos changes for DCN20 hw seq
  drm/amd/display: Fix incorrect cursor pos on scaled primary plane
  drm/amd/display: change default pipe_split policy for DCN1
  drm/amd/display: Translate cursor position by source rect
  drm/amd/display: Update stream adjust in dc_stream_adjust_vmin_vmax
  drm/amd/display: Avoid create MST prop after registration
  drm/amdgpu/psp: dont warn on missing optional TA's
  drm/amdgpu: update RAS related dmesg print
  drm/amdgpu: resolve mGPU RAS query instability
  ...

4 years agoMerge tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Fri, 10 Apr 2020 19:27:06 +0000 (12:27 -0700)]
Merge tag 'sound-fix-5.7-rc1' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes gathered since the previous update.

  ALSA core:
   - Regression fix for OSS PCM emulation

  ASoC:
   - Trivial fixes in reg bit mask ops, DAPM, DPCM and topology
   - Lots of fixes for Intel-based devices
   - Minor fixes for AMD, STM32, Qualcomm, Realtek

  Others:
   - Fixes for the bugs in mixer handling in HD-audio and ice1724
     drivers that were caught by the recent kctl validator
   - New quirks for HD-audio and USB-audio

  Also this contains a fix for EDD firmware fix, which slipped from
  anyone's hands"

* tag 'sound-fix-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
  ALSA: hda: Add driver blacklist
  ALSA: usb-audio: Add mixer workaround for TRX40 and co
  ALSA: hda/realtek - Add quirk for MSI GL63
  ALSA: ice1724: Fix invalid access for enumerated ctl items
  ALSA: hda: Fix potential access overflow in beep helper
  ASoC: cs4270: pull reset GPIO low then high
  ALSA: hda/realtek - Add HP new mute led supported for ALC236
  ALSA: hda/realtek - Add supported new mute Led for HP
  ASoC: rt5645: Add platform-data for Medion E1239T
  ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet
  ASoC: stm32: sai: Add missing cleanup
  ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha S
  ASoC: Intel: atom: Fix uninitialized variable compiler warning
  ASoC: Intel: atom: Check drv->lock is locked in sst_fill_and_send_cmd_unlocked
  ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
  ASoC: SOF: Turn "firmware boot complete" message into a dbg message
  ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
  ALSA: pcm: oss: Fix regression by buffer overflow fix (again)
  ALSA: pcm: oss: Fix regression by buffer overflow fix
  edd: Use scnprintf() for avoiding potential buffer overflow
  ...

4 years agoMerge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Fri, 10 Apr 2020 19:21:11 +0000 (12:21 -0700)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This is a batch of changes that didn't make it in the initial pull
  request because the lpfc series had to be rebased to redo an incorrect
  split.

  It's basically driver updates to lpfc, target, bnx2fc and ufs with the
  rest being minor updates except the sr_block_release one which fixes a
  use after free introduced by the removal of the global mutex in the
  first patch set"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (35 commits)
  scsi: core: Add DID_ALLOC_FAILURE and DID_MEDIUM_ERROR to hostbyte_table
  scsi: ufs: Use ufshcd_config_pwr_mode() when scaling gear
  scsi: bnx2fc: fix boolreturn.cocci warnings
  scsi: zfcp: use fallthrough;
  scsi: aacraid: do not overwrite retval in aac_reset_adapter()
  scsi: sr: Fix sr_block_release()
  scsi: aic7xxx: Remove more FreeBSD-specific code
  scsi: mpt3sas: Fix kernel panic observed on soft HBA unplug
  scsi: ufs: set device as active power mode after resetting device
  scsi: iscsi: Report unbind session event when the target has been removed
  scsi: lpfc: Change default SCSI LUN QD to 64
  scsi: libfc: rport state move to PLOGI if all PRLI retry exhausted
  scsi: libfc: If PRLI rejected, move rport to PLOGI state
  scsi: bnx2fc: Update the driver version to 2.12.13
  scsi: bnx2fc: Fix SCSI command completion after cleanup is posted
  scsi: bnx2fc: Process the RQE with CQE in interrupt context
  scsi: target: use the stack for XCOPY passthrough cmds
  scsi: target: increase XCOPY I/O size
  scsi: target: avoid per-loop XCOPY buffer allocations
  scsi: target: drop xcopy DISK BLOCK LENGTH debug
  ...

4 years agosmb3: enable swap on SMB3 mounts
Steve French [Fri, 10 Apr 2020 02:42:18 +0000 (21:42 -0500)]
smb3: enable swap on SMB3 mounts

Add experimental support for allowing a swap file to be on an SMB3
mount.  There are use cases where swapping over a secure network
filesystem is preferable. In some cases there are no local
block devices large enough, and network block devices can be
hard to setup and secure.  And in some cases there are no
local block devices at all (e.g. with the recent addition of
remote boot over SMB3 mounts).

There are various enhancements that can be added later e.g.:
- doing a mandatory byte range lock over the swapfile (until
the Linux VFS is modified to notify the file system that an open
is for a swapfile, when the file can be opened "DENY_ALL" to prevent
others from opening it).
- pinning more buffers in the underlying transport to minimize memory
allocations in the TCP stack under the fs
- documenting how to create ACLs (on the server) to secure the
swapfile (or adding additional tools to cifs-utils to make it easier)

Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
4 years agoMAINTAINERS: Remove nios2-dev@lists.rocketboards.org
Ley Foon Tan [Thu, 16 Jan 2020 00:46:38 +0000 (08:46 +0800)]
MAINTAINERS: Remove nios2-dev@lists.rocketboards.org

nios2-dev@lists.rocketboards.org mailing list is no longer supported,
remove it from MAINTAINERS file.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
4 years agoarch: nios2: remove 'resetvalue' property
Alexandru Ardelean [Fri, 10 Apr 2020 15:41:18 +0000 (23:41 +0800)]
arch: nios2: remove 'resetvalue' property

The 'altr,pio-1.0' driver does not handle the 'resetvalue', so remove it.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
4 years agoarch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio'
Alexandru Ardelean [Fri, 10 Apr 2020 15:40:37 +0000 (23:40 +0800)]
arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio'

There is no more 'altr,gpio-bank-width' in the 'altr,pio-1.0' driver.
There is a 'altr,ngpio' which is  what the property wants to configure.

This change updates all occurrences of 'altr,gpio-bank-width' to
'altr,ngpio'.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
4 years agoarch: nios2: Enable the common clk subsystem on Nios2
Dragos Bogdan [Fri, 10 Apr 2020 15:38:23 +0000 (23:38 +0800)]
arch: nios2: Enable the common clk subsystem on Nios2

This patch adds support for common clock framework on Nios2. Clock
framework is commonly used in many drivers, and this patch makes it
available for the entire architecture, not just on a per-driver basis.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
4 years agoMerge tag 'libata-5.7-2020-04-09' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 10 Apr 2020 17:26:28 +0000 (10:26 -0700)]
Merge tag 'libata-5.7-2020-04-09' of git://git.kernel.dk/linux-block

Pull libata fixes from Jens Axboe:
 "A few followup changes/fixes for libata:

   - PMP removal fix (Kai-Heng)

   - Add remapped NVMe device attribute to sysfs (Kai-Heng)

   - Remove redundant assignment (Colin)

   - Add yet another Comet Lake ID (Jian-Hong)"

* tag 'libata-5.7-2020-04-09' of git://git.kernel.dk/linux-block:
  ahci: Add Intel Comet Lake PCH RAID PCI ID
  ata: ahci: Add sysfs attribute to show remapped NVMe device count
  ata: ahci-imx: remove redundant assignment to ret
  libata: Return correct status in sata_pmp_eh_recover_pm() when ATA_DFLAG_DETACH is set

4 years agoMerge tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 10 Apr 2020 17:06:54 +0000 (10:06 -0700)]
Merge tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "Here's a set of fixes that should go into this merge window. This
  contains:

   - NVMe pull request from Christoph with various fixes

   - Better discard support for loop (Evan)

   - Only call ->commit_rqs() if we have queued IO (Keith)

   - blkcg offlining fixes (Tejun)

   - fix (and fix the fix) for busy partitions"

* tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-block:
  block: fix busy device checking in blk_drop_partitions again
  block: fix busy device checking in blk_drop_partitions
  nvmet-rdma: fix double free of rdma queue
  blk-mq: don't commit_rqs() if none were queued
  nvme-fc: Revert "add module to ops template to allow module references"
  nvme: fix deadlock caused by ANA update wrong locking
  nvmet-rdma: fix bonding failover possible NULL deref
  loop: Better discard support for block devices
  loop: Report EOPNOTSUPP properly
  nvmet: fix NULL dereference when removing a referral
  nvme: inherit stable pages constraint in the mpath stack device
  blkcg: don't offline parent blkcg first
  blkcg: rename blkcg->cgwb_refcnt to ->online_pin and always use it
  nvme-tcp: fix possible crash in recv error flow
  nvme-tcp: don't poll a non-live queue
  nvme-tcp: fix possible crash in write_zeroes processing
  nvmet-fc: fix typo in comment
  nvme-rdma: Replace comma with a semicolon
  nvme-fcloop: fix deallocation of working context
  nvme: fix compat address handling in several ioctls

4 years agoMerge tag 'io_uring-5.7-2020-04-09' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 10 Apr 2020 17:02:21 +0000 (10:02 -0700)]
Merge tag 'io_uring-5.7-2020-04-09' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "Here's a set of fixes that either weren't quite ready for the first,
  or came about from some intensive testing on memcached with 350K+
  sockets.

  Summary:

   - Fixes for races or deadlocks around poll handling

   - Don't double account fixed files against RLIMIT_NOFILE

   - IORING_OP_OPENAT LFS fix

   - Poll retry handling (Bijan)

   - Missing finish_wait() for SQPOLL (Hillf)

   - Cleanup/split of io_kiocb alloc vs ctx references (Pavel)

   - Fixed file unregistration and init fixes (Xiaoguang)

   - Various little fixes (Xiaoguang, Pavel, Colin)"

* tag 'io_uring-5.7-2020-04-09' of git://git.kernel.dk/linux-block:
  io_uring: punt final io_ring_ctx wait-and-free to workqueue
  io_uring: fix fs cleanup on cqe overflow
  io_uring: don't read user-shared sqe flags twice
  io_uring: remove req init from io_get_req()
  io_uring: alloc req only after getting sqe
  io_uring: simplify io_get_sqring
  io_uring: do not always copy iovec in io_req_map_rw()
  io_uring: ensure openat sets O_LARGEFILE if needed
  io_uring: initialize fixed_file_data lock
  io_uring: remove redundant variable pointer nxt and io_wq_assign_next call
  io_uring: fix ctx refcounting in io_submit_sqes()
  io_uring: process requests completed with -EAGAIN on poll list
  io_uring: remove bogus RLIMIT_NOFILE check in file registration
  io_uring: use io-wq manager as backup task if task is exiting
  io_uring: grab task reference for poll requests
  io_uring: retry poll if we got woken with non-matching mask
  io_uring: add missing finish_wait() in io_sq_thread()
  io_uring: refactor file register/unregister/update handling