drm/amdkfd: Expose GFXIP engine version to sysfs

Add u32 gfx_target_version field to kfd_node_properties and
kfd_device_info. Populate <asic>_device_info structs accordingly and
expose to sysfs.

This allows eliminating device-ID-based lookup tables in user mode for
future ASICs.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop redundant null-pointer checks in amdgpu_ttm_tt_populate() and amdgpu_ttm_tt_unpopulate()

The varialbe gtt in the function amdgpu_ttm_tt_populate() and
amdgpu_ttm_tt_unpopulate() is guaranteed to be not NULL in the context.
Thus the null-pointer checks are redundant and can be dropped.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: don't enable baco on boco platforms in runpm

If the platform uses BOCO, don't use BACO in runtime suspend.
We could end up executing the BACO path if the platform supports
both.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1669
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Put MODE register in wave debug info

Add the MODE register into the per-wave debug information.
This register holds state such as FP rounding and denorm
modes, which exceptions are enabled, and active clamping
modes.

Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set RAS EEPROM address from VBIOS

update to latest atombios fw table

Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Recovery vcn instance iterate.

The previous logic is recording the amount of valid vcn instances
to use them on SRIOV, it is a hard task due to the vcn accessment is
based on the index of the vcn instance.

Check if the vcn instance enabled before do instance init.

Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: added synchronization for psp cmd buf access

resolved race condition accessing psp cmd submission memory

Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update PSP BL cmd IDs

resolved bug with incorrect PSP BL cmd IDs

Signed-off-by: John Clements <john.clements@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update smu v13.0.1 firmware header

Update smu v13.0.1 firmware header for yellow carp.

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add DID for beige goby

Add device ids.

Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: add regCP_MEx_INT_STAT_DEBUG for Aldebaran debugging

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: fix DMUB firmware version info

DMUB firmware info is printed before it gets initialized.
Correct this order to ensure true value is conveyed.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.147

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.77

Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DC_FP helper to check FPU state

To fully isolate FPU operations in a single place, we must avoid
situations where compilers spill FP values to registers due to FP enable
in a specific C file. Note that even if we isolate all FPU functions in
a single file and call its interface from other files, the compiler
might enable the use of FPU before we call DC_FP_START. Nevertheless, it
is the programmer's responsibility to invoke DC_FP_START/END in the
correct place. To highlight situations where developers forgot to use
the FP protection before calling the DC FPU interface functions, we
introduce a helper that checks if the function is invoked under FP
protection. If not, it will trigger a kernel warning.

Changes cince V3:
- Rebase

Changes cince V2 (Christian):
- Do not use this_cpu_* between get/put_cpu_ptr().
- In the kernel documentation, better describe restrictions.
- Make dc_assert_fp_enabled trigger the ASSERT message.

Changes since V1:
- Remove fp_enable variables
- Rename dc_is_fp_enabled to dc_assert_fp_enabled
- Replace wrong variable type

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Anson Jacob <Anson.Jacob@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Jun Lei <jun.lei@amd.com>
Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add control mechanism for FPU utilization

DC invokes DC_FPU_START/END in multiple parts of the code; this can
create a situation where we invoke this FPU operation in a nested way or
exit too early. For avoiding this situation, this commit adds a
mechanism where dc_fpu_begin/end manages the access to
kernel_fpu_begin/end.

Change since V3:
- Rebase

Change since V2:
- Christian: Do not use this_cpu_* between get/put_cpu_ptr().

Change since V1:
- Use a better variable names
- Use get_cpu_ptr and put_cpu_ptr to better balance preemption enable
and disable

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Anson Jacob <Anson.Jacob@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Jun Lei <jun.lei@amd.com>
Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add control mechanism for FPU

DC invokes DC_FPU_START/END in multiple parts of the code; this can
create a situation where we invoke this FPU operation in a nested way or
exit too early. For avoiding this situation, this commit adds a
mechanism where dc_fpu_begin/end manages the access to
kernel_fpu_begin/end.

Change since V3:
- Christian: Move PPC64 code to dc_fpu_begin/end.

Change since V2:
- Christian: Do not use this_cpu_* between get/put_cpu_ptr().

Change since V1:
- Use a better variable names
- Use get_cpu_ptr and put_cpu_ptr to better balance preemption enable
and disable

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Anson Jacob <Anson.Jacob@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Jun Lei <jun.lei@amd.com>
Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move specific DCN2x code that uses FPU to DML

The display core files rely on FPU, which requires to be compiled with
special flags. Ideally, we don't want these FPU operations spread around
the DC code; nevertheless, it happens in the current source. This commit
introduces a new directory inside DML for centralizing shared DCN
functions that require FPU and have been used outside DML. For
illustrating this process of transferring FPU functions to the DML
folder, this commit moves one of the functions
dcn20_populate_dml_writeback_from_context) that require FPU access to a
single shared file. Notice that this is the first part of the work, and
it does not fix the FPU issue yet; we still need other patches for
achieving the complete FPU isolation.

Changes since V3:
- Jun: Instead of creating a new directory to keep the FPU code, let's
make the DML folder the only part that requires FPU access. Drop
fpu_operation folder.
- Christian: Fix function code style.

Changes since V2:
- Christian: Remove unnecessary wrapper.
- lkp: Add missing prototype.
- Only compile the FPU operations if the DCN option is enabled.

Change since V1:
- Update documentation and rebase.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Anson Jacob <Anson.Jacob@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Jun Lei <jun.lei@amd.com>
Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: workaround for hard hang on HPD on native DP

[Why]
HPD disable and enable sequences are not mutually exclusive
on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s),
part of the disable sequence (specifically, a request to SMU
to lower refclk) could come right before the call to PHY
enable, causing DMUB to access an unresponsive PHY
and thus a hard hang on the system.

[How]
Disable 48mhz refclk off on native DP.

Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add check for validating unsupported ODM plus MPO case

[Why]
We do not currently support ODM plus MPO on only one side of the
screen. This unsupported case causes validation calculations to
divide by zero due to invalid viewport values.

[How]
Add stopgap for the validation of ODM plus MPO on one side of
screen case.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jaehyun Chung <jaehyum.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix resetting DCN3.1 HW when resuming from S4

[Why] On S4 resume we also need to fix detection of when to reload DMCUB
firmware because we're currently using the VBIOS version which isn't
compatible with the driver version.

[How] Update the hardware init check for DCN31 since it's the ASIC that
has this issue.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jude Shih <jude.shih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove redundant vblank workqueues in DM

[Why]
Display Manager initializes array of vblank workqueues, but only 1 is used.

[How]
Use single instance init instead of array.

Reviewed-by: Qingqing Zhou <Qingqing.Zhuo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Increase stutter watermark for dcn303

[Why&How]
Hardware team suggested to use SRExitTime= 35.5us as w/a to prevent
underflow in certain modes.

Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Bing Guo <bing.guo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix Dynamic bpp issue with 8K30 with Navi 1X

Why:
In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X
by the number of pipes ODM Combined.

How:
Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the
number of pipes ODM Combined.

Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Bing Guo <bing.guo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Assume LTTPR interop for DCN31+

[WHY]
For DCN31 onward, LTTPR is to be enabled and set to Transparent by
VBIOS.  Driver is to assume that VBIOS has done this without needing to
check the VBIOS interop bit.

[HOW]
Add LTTPR enable and interop VBIOS bits into dc->caps, and force-set the
interop bit to true for DCN31+.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: remove redundant host to psp cmd buf allocations

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: replace dce_virtual with amdgpu_vkms (v3)

Move dce_virtual into amdgpu_vkms and update all references to
dce_virtual with amdgpu_vkms.

v2: Removed more references to dce_virtual.

v3: Restored display modes from previous implementation.

Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup dce_virtual

Remove obsolete functions and variables from dce_virtual.

Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: create amdgpu_vkms (v4)

Modify the VKMS driver into an api that dce_virtual can use to create
virtual displays that obey drm's atomic modesetting api.

v2: Made local functions static.

v3: Switched vkms_output kzalloc for kcalloc.
    Cleanup patches by moving display mode fixes to this patch.

v4: Update atomic_check and atomic_update to comply with new kms api.

Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gpu/drm/amd: Remove duplicated include of drm_drv.h

Duplicate include header file <drm/drm_drv.h>
line 28: #include <drm/drm_drv.h>
line 44: #include <drm/drm_drv.h>

Signed-off-by: zhouchuangao <zhouchuangao@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: avoid over-handle of fence driver fini in s3 test (v2)

In amdgpu_fence_driver_hw_fini, no need to call drm_sched_fini to stop
scheduler in s3 test, otherwise, fence related failure will arrive
after resume. To fix this and for a better clean up, move drm_sched_fini
from fence_hw_fini to fence_sw_fini, as it's part of driver shutdown, and
should never be called in hw_fini.

v2: rename amdgpu_fence_driver_init to amdgpu_fence_driver_sw_init,
to keep sw_init and sw_fini paired.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1668
Fixes: 8d35a2596164c1 ("drm/amdgpu: adjust fence driver enable sequence")
Suggested-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct aldebaran smu feature mapping FEATURE_DATA_CALCULATIONS

correct smu feature mapping: FEATURE_DATA_CALCULATIONS
it will cause sysfs node of "pp_features" show error.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix channel_index table layout for Aldebaran

Fix the channel_index table layout to fetch the correct
channel_index when calculating physical address from
normalized address during page retirement.
Also, fix the number of UMC instances and number of channels
within each UMC instance for Aldebaran.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-By: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled

'pm_suspend_target_state' is only available when CONFIG_PM_SLEEP
is set/enabled. OTOH, when both SUSPEND and HIBERNATION are not set,
PM_SLEEP is not set, so this variable cannot be used.

../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: In function ‘amdgpu_acpi_is_s0ix_active’:
../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:1046:11: error: ‘pm_suspend_target_state’ undeclared (first use in this function); did you mean ‘__KSYM_pm_suspend_target_state’?
    return pm_suspend_target_state == PM_SUSPEND_TO_IDLE;
           ^~~~~~~~~~~~~~~~~~~~~~~
           __KSYM_pm_suspend_target_state

Also use shorter IS_ENABLED(CONFIG_foo) notation for checking the
2 config symbols.

Fixes: 91e273712ab8dd ("drm/amdgpu: Check pmops for desired suspend state")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-next@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update yellow carp pmfw interface version

Correct yellow carp driver-PMFW interface version to v4.

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay/smu10: Fix a typo in error message

This patch fixes a spelling typo in error message.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gpu/drm/radeon: Fix typo in comments

Remove the repeated word 'the' from comments

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix typo in comments

Remove the repeated word 'the' from comments

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix the doorbell missing when in CGPG issue for renoir.

If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Only apply heavy-weight TLB flush on Aldebaran

It is to workaround HW bug on other Asics and based on
reverting two commits back:
  drm/amdkfd: Add heavy-weight TLB flush after unmapping
  drm/amdkfd: Add memory sync before TLB flush on unmap

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "Revert "drm/amdkfd: Only apply TLB flush optimization on ALdebaran""

This reverts commit 53d0533049a573298f74ae07a39db14163960e68.

Revert reason: The issue has been resolved.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "Revert "drm/amdkfd: Add memory sync before TLB flush on unmap""

This reverts commit 4bba567c8c35a9cbcd16fb4780a0c3dfd162e08e.

Revert reason: The issue has been resolved.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "Revert "drm/amdgpu: Fix warning of Function parameter or member not described""

This reverts commit 4e7b93ca52fb228b177168d436449c5671415a72.

Revert reason: The issue has been resolved.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "Revert "drm/amdkfd: Make TLB flush conditional on mapping""

This reverts commit 7ed9876c9793bfe96fed58ba645d6c8e32f26001.

Revert reason: The issue has been resolved.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "Revert "drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update""

This reverts commit 024d8811c90ed56d8b90cdcf71e51c9fedeff460.

Revert reason: The issue has been resolved.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "Revert "drm/amdkfd: Add heavy-weight TLB flush after unmapping""

This reverts commit 430f8e6edbaac8abfddf76f1aef732d9c6257211.

Revert reason: Issue has been resolved.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix out-of-bounds read when update mapping

If one GTT BO has been evicted/swapped out, it should sit in CPU domain.
TTM only alloc struct ttm_resource instead of struct ttm_range_mgr_node
for sysMem.

Now when we update mapping for such invalidated BOs, we might walk out
of bounds of struct ttm_resource.

Three possible fix:
1) Let sysMem manager alloc struct ttm_range_mgr_node, like
ttm_range_manager does.
2) Pass pages_addr to update_mapping function too, but need memset
pages_addr[] to zero when unpopulate.
3) Init amdgpu_res_cursor directly.

bug is detected by kfence.
==================================================================
BUG: KFENCE: out-of-bounds read in amdgpu_vm_bo_update_mapping+0x564/0x6e0

Out-of-bounds read at 0x000000008ea93fe9 (64B right of kfence-#167):
 amdgpu_vm_bo_update_mapping+0x564/0x6e0 [amdgpu]
 amdgpu_vm_bo_update+0x282/0xa40 [amdgpu]
 amdgpu_vm_handle_moved+0x19e/0x1f0 [amdgpu]
 amdgpu_cs_vm_handling+0x4e4/0x640 [amdgpu]
 amdgpu_cs_ioctl+0x19e7/0x23c0 [amdgpu]
 drm_ioctl_kernel+0xf3/0x180 [drm]
 drm_ioctl+0x2cb/0x550 [drm]
 amdgpu_drm_ioctl+0x5e/0xb0 [amdgpu]

kfence-#167 [0x000000008e11c055-0x000000001f676b3e
 ttm_sys_man_alloc+0x35/0x80 [ttm]
 ttm_resource_alloc+0x39/0x50 [ttm]
 ttm_bo_swapout+0x252/0x5a0 [ttm]
 ttm_device_swapout+0x107/0x180 [ttm]
 ttm_global_swapout+0x6f/0x130 [ttm]
 ttm_tt_populate+0xb1/0x2a0 [ttm]
 ttm_bo_handle_move_mem+0x17e/0x1d0 [ttm]
 ttm_mem_evict_first+0x59d/0x9c0 [ttm]
 ttm_bo_mem_space+0x39f/0x400 [ttm]
 ttm_bo_validate+0x13c/0x340 [ttm]
 ttm_bo_init_reserved+0x269/0x540 [ttm]
 amdgpu_bo_create+0x1d1/0xa30 [amdgpu]
 amdgpu_bo_create_user+0x40/0x80 [amdgpu]
 amdgpu_gem_object_create+0x71/0xc0 [amdgpu]
 amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x2f2/0xcd0 [amdgpu]
 kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu]
 kfd_ioctl+0x461/0x690 [amdgpu]

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'amd-drm-next-5.15-2021-07-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.15-2021-07-29:

amdgpu:
- VCN/JPEG power down sequencing fixes
- Various navi pcie link handling fixes
- Clockgating fixes
- Yellow Carp fixes
- Beige Goby fixes
- Misc code cleanups
- S0ix fixes
- SMU i2c bus rework
- EEPROM handling rework
- PSP ucode handling cleanup
- SMU error handling rework
- AMD HDMI freesync fixes
- USB PD firmware update rework
- MMIO based vram access rework
- Misc display fixes
- Backlight fixes
- Add initial Cyan Skillfish support
- Overclocking fixes suspend/resume

amdkfd:
- Sysfs leak fix
- Add counters for vm faults and migration
- GPUVM TLB optimizations

radeon:
- Misc fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730033455.3852-1-alexander.deucher@amd.com

Merge tag 'drm-msm-next-2021-07-28' of https://gitlab.freedesktop.org/drm/msm into drm-next

An early pull for v5.15 (there'll be more coming in a week or two),
consisting of the drm/scheduler conversion and a couple other small
series that one was based one.  Mostly sending this now because IIUC
danvet wanted it in drm-next so he could rebase on it.  (Daniel, if
you disagree then speak up, and I'll instead include this in the main
pull request once that is ready.)

This also has a core patch to drop drm_gem_object_put_locked() now
that the last use of it is removed.

[airlied: add NULL to drm_sched_init]

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGumRk7H88bqV=H9Fb1SM0zPBo5B7NsCU3jFFKBYxf5k+Q@mail.gmail.com

Merge tag 'drm-misc-next-2021-07-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.15:

UAPI Changes:
- Add modifiers for arm fixed rate compression.

Cross-subsystem Changes:
- Assorted dt binding fixes.
- Convert ssd1307fb to json-schema.
- Update a lot of irc channels to point to OFTC, as everyone moved there.
- Fix the same divide by zero for asilantfb, kyro, rivafb.

Core Changes:
- Document requirements for new atomic properties.
- Add drm_gem_fb_(begin/end)_cpu_access helpers, and use them in some drivers.
- Document drm_property_enum.value for bitfields.
- Add explicit _NO_ for MIPI_DSI flags that disable features.
- Assorted documentation fixes.
- Update fb_damage handling, and move drm_plane_enable_fb_damage_clips to core.
- Add logging and docs to RMFB ioctl.
- Assorted small fixes to dp_mst, master handling.
- Clarify drm lease usage.

Driver Changes:
- Assorted small fixes to panfrost, hibmc, bridge/nwl-dsi, rockchip, vc4.
- More drm -> linux irq conversions.
- Add support for some Logic Technologies and Multi-Inno panels.
- Expose phy-functionality for drm/rockchip, to allow controlling from the media subsystem.
- Add support for 2 AUO panels.
- Add damage handling to ssd1307fb.
- Improve FIFO handling on mxsfb.
- Assorted small fixes to vmwgfx, and bump version to 2.19 for the new ioctls.
- Improve sony acx424akp backlight handling.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a753221a-e23e-0dc4-7ca6-8c1b179738d0@linux.intel.com

Merge tag 'du-next-20210728' of git://linuxtv.org/pinchartl/media into drm-next

- R-Car DU shutdown fixes
- R-Car DU conversion to bridge connector helper
- Misc small fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YQGHjOSOw2G4+A3x@pendragon.ideasonboard.com

drm/vc4: hdmi: Remove unused struct

Commit 91e99e113929 ("drm/vc4: hdmi: Register HDMI codec") removed the
references to the vc4_hdmi_audio_component_drv structure, but not the
structure itself resulting in a warning. Remove it.

Fixes: 91e99e113929 ("drm/vc4: hdmi: Register HDMI codec")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707093632.1468127-2-maxime@cerno.tech

drm/vc4: hdmi: Remove redundant variables

The vc4_hdmi_audio_prepare function and the functions it's calling have
in several occurences multiple dereferences of either the sample rate or
the number of channels.

It turns out that these variables are also passed through the hdmi codec
parameters structure. Convert all the users to use this structure, and
if it's used multiple times use a variable to store it instead of
dereferencing it every time.

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707093632.1468127-1-maxime@cerno.tech

drm: clarify usage of drm leases

We make the following changes to the documentation of drm leases to
make it easier to reason about their usage. In particular, we clarify
the lifetime and locking rules of lease fields in drm_master:

1. Make it clear that &drm_device.mode_config.idr_mutex protects the
lease idr and list structures for drm_master. The lessor field itself
doesn't need to be protected as it doesn't change after it's set in
drm_lease_create.

2. Add descriptions for the lifetime of lessors and leases.

3. Add an overview DOC: section in drm-uapi.rst that defines the
terminology for drm leasing, and explains how leases work and why
they're used.

Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728102739.441543-1-desmondcheongzx@gmail.com

drm/amd/pm: Fix a bug in semaphore double-lock

Fix a bug in smu_cmn_send_msg_without_waiting() in
that this function does not need to take the
smu->message_lock mutex in order to send a message
down to the SMU. The mutex is acquired by the
caller of this function instead.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Changfeng Zhu <Changfeng.Zhu@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Fixes: 5810323ba69289 ("drm/amd/pm: Fix a bug communicating with the SMU (v5)")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable psp front door loading by default for cyan_skillfish2

The function is ready on psp firmware, and enable it by default.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: adjust fence driver enable sequence

Fence driver was enabled per ring when sw init on per IP block before.
Change to enable all the fence driver at the same time after
amdgpu_device_ip_init finished.
Rename some function related to fence to make it reasonable for read.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Added PSP13 BL loading support for additional drivers

Added BL loading support for soc/intf/dbg drivers

Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Consolidated PSP13 BL FW loading

Remove duplicate code

Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Added support for added psp driver binaries FW

Detect psp driver binaries packed into FW and try to load the FW

Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Added latest PSP FW header

Improved handling for scalling PSP FW binaries

Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove the access of xxx_PSP_DEBUG on cycan_skillfish

It won't need to clear the xxx_PSP_DEBUG registers, because firmware
will handle this change.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: add support for multiple backlights

On platforms that support multiple backlights, register
each one separately.  This lets us manage them independently
rather than registering a single backlight and applying the
same settings to both.

v2: fix typo:
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/panel-sony-acx424akp: Modernize backlight handling

This converts the internal backlight in the Sony ACX424AKP
driver to do it the canonical way:

- Assign the panel->backlight during probe.
- Let the panel framework handle the backlight.
- Make the backlight .set_brightness() turn the backlight
  off completely if blank.
- Fix some dev_err_probe() use cases along the way.

Tested on the U8500 HREF520 reference design.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715092808.1100106-1-linus.walleij@linaro.org

drm: use the lookup lock in drm_is_current_master

Inside drm_is_current_master, using the outer drm_device.master_mutex
to protect reads of drm_file.master makes the function prone to creating
lock hierarchy inversions. Instead, we can use the
drm_file.master_lookup_lock that sits at the bottom of the lock
hierarchy.

Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210724111824.59266-2-desmondcheongzx@gmail.com

maintainers: add bugs and chat URLs for amdgpu

Add links to the issue tracker and the IRC channel for the amdgpu
driver.

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Pan Xinhui <Xinhui.Pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: only enable aux backlight control for OLED panels

We've gotten a number of reports about backlight control not
working on panels which indicate that they use aux backlight
control.  A recent patch:

commit 2d73eabe2984a435737498ab39bb1500a9ffe9a9
Author: Camille Cho <Camille.Cho@amd.com>
Date:   Thu Jul 8 18:28:37 2021 +0800

    drm/amd/display: Only set default brightness for OLED

    [Why]
    We used to unconditionally set backlight path as AUX for panels capable
    of backlight adjustment via DPCD in set default brightness.

    [How]
    This should be limited to OLED panel only since we control backlight via
    PWM path for SDR mode in LCD HDR panel.

Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changes some other code to only use aux for backlight control on
OLED panels.  The commit message seems to indicate that PWM should
be used for SDR mode on HDR panels.  Do something similar for
backlight control in general.  This may need to be revisited if and
when HDR started to get used.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: restore user customized OD settings properly for Sienna Cichlid

Properly restore those committed and non-committed user customized OD
settings.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: restore user customized OD settings properly for NV1x

The customized OD settings can be divided into two parts: those
committed ones and non-committed ones.
  - For those changes which had been fed to SMU before S3/S4/Runpm
    suspend kicked, they are committed changes. They should be properly
    restored and fed to SMU on S3/S4/Runpm resume.
  - For those non-committed changes, they are restored only without feeding
    to SMU.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "Revert "drm/amdkfd: Add memory sync before TLB flush on unmap""

This reverts commit 4bba567c8c35a9cbcd16fb4780a0c3dfd162e08e.

Revert reason: The issue has been resolved.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "Revert "drm/amdgpu: Fix warning of Function parameter or member not described""

This reverts commit 4e7b93ca52fb228b177168d436449c5671415a72.

Revert reason: The issue has been resolved.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "Revert "drm/amdkfd: Make TLB flush conditional on mapping""

This reverts commit 7ed9876c9793bfe96fed58ba645d6c8e32f26001.

Revert reason: The issue has been resolved.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "Revert "drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update""

This reverts commit 024d8811c90ed56d8b90cdcf71e51c9fedeff460.

Revert reason: The issue has been resolved.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "Revert "drm/amdkfd: Add heavy-weight TLB flush after unmapping""

This reverts commit 430f8e6edbaac8abfddf76f1aef732d9c6257211.

Revert reason: Issue has been resolved.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.146

This version brings along following fixed:
  - Guard DST_Y_PREFETCH register overflow in DCN21
  - Add missing DCN21 IP parameter
  - Fix PSR command version
  - Add ETW logging for AUX failures
  - Add ETW log to dmub_psr_get_state
  - Fixed EdidUtility build errors
  - Fix missing reg offset for the dmcub test debug registers
  - Adding update authentication interface
  - Remove unused functions of opm state query support
  - Always wait for update lock status
  - Refactor riommu invalidation wa
  - Ensure dentist display clock update finished in DCN20

Reviewed-by: Hsieh Mike <Mike.Hsieh@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.76

Reviewed-by: Cyr Aric <aric.cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: ensure dentist display clock update finished in DCN20

[Why]
We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist
display clockis updated to target value. In some scenarios with large
display clock margin, it will deliver unfinished display clock and cause
issues like display black screen.

[How]
Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock
has been update to target value before driver do other clock related
actions.

Reviewed-by: Cyr Aric <aric.cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: refactor riommu invalidation wa

[Why]
A cleaner solution, only done once on boot.

[How]
Remove previous workaround and configure an extra
vmid one time on boot

Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Always wait for update lock status

Remove code that would skip wait for lock status for Diags
FPGA case

Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused functions

[why]
It has been decided that opm state query support will be dropped.
Therefore link encryption enabled and save current encryption states
won't be used anymore and there are no foreseeable usages in the future.
We will remove these two interfaces for clean up.

Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add update authentication interface

[why]
Previously to toggle authentication, we need to remove and
add the same display back with modified adjustment.
This method will toggle DTM state without actual hardware changes.
This is not per design and would cause potential issues in the long run.

[how]
We are creating a dedicated interface that does the same thing as
remove and add back the display without changing DTM state.

Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix missing reg offset

[Why]
Initializing was missing reg offsets for the dmcub test debug registers
causing assert

[How]
Add initialization

Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fixed EdidUtility build errors

[HOW]
Added #ifdefs and refactored various parts of dc to
allow dc_link to be built by AMD EDID UTILITY

[WHY]
dc_dsc was refactored moving some of the code that AMD EDID UTILITY needed
to dc_link, so now dc_link needs to be included by AMD EDID UTILITY

Squash in DCN config fix (Alex)

Reviewed-by: Leung Martin <Martin.Leung@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Mark Morra <MarkAlbert.Morra@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/vmwgfx: Use 2.19 version number to recognize mks-stats ioctls

To let the userspace recognize that it's running on top of a vmwgfx
that supports mks-stat ioctls we need to bump the version number.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723165153.113198-4-zackr@vmware.com

drm/vmwgfx: Be a lot more flexible with MOB limits

The code was trying to keep a strict limit on the amount of mob
memory that was used in the guest by making it match the host
settings. There's technically no reason to do that (guests can
certainly use more than the host can have resident in renderers
at the same time).

In particular this is problematic because our userspace is not
great at handling OOM conditions and running out of MOB space
results in GL apps crashing, e.g. gnome-shell likes to allocate
huge surfaces (~61MB for the desktop on 2560x1600 with two workspaces)
and running out of memory there means that the gnome-shell crashes
on startup taking us back to the login and resulting in a system
where one can not login in graphically anymore.

Instead of letting the userspace crash we can extend available
MOB space, we just don't want to use all of the RAM for graphics,
so we're going to limit it to half of RAM.

With the addition of some extra logging this should make the
"guest has been configured with not enough graphics memory"
errors a lot easier to diagnose in cases where the automatic
expansion of MOB space fails.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723165153.113198-3-zackr@vmware.com

drm/vmwgfx: Cleanup logging

The code was using the old DRM logging functions, which made it
hard to figure out what was coming from vmwgfx. The newer logging
helpers include the driver name in the logs and make it explicit
which driver they're coming from. This allows us to standardize
our logging a bit and clean it up in the process.

vmwgfx is a little special because technically the hardware it's
running on can be anything from the last 12 years or so which is
why we need to include capabilities in the logs in the first
place or otherwise we'd have no way of knowing what were
the capabilities of the platform the guest was running in.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723165153.113198-2-zackr@vmware.com

drm/vmwgfx: Switch to using DRM_IOCTL_DEF_DRV

The macro has been accounting for DRM_COMMAND_BASE for a long time
now so there's no reason to still be duplicating it. Plus we were
leaving the name undefined which meant that all the DRM ioctl
warnings/errors were always listing "null" ioctl at the culprit.

This fixes the undefined ioctl name and removes duplicated code.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723165153.113198-1-zackr@vmware.com

drm/msm/gem: Mark active before pinning

Mark all the bos in the submit as active, before pinning, to prevent
evicting a buffer in the same submit to make room for a buffer earlier
in the table.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210728010632.2633470-14-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Utilize gpu scheduler priorities

The drm/scheduler provides additional prioritization on top of that
provided by however many number of ringbuffers (each with their own
priority level) is supported on a given generation.  Expose the
additional levels of priority to userspace and map the userspace
priority back to ring (first level of priority) and schedular priority
(additional priority levels within the ring).

Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-13-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Drop struct_mutex in submit path

It is sufficient to serialize on the submit queue now.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-12-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Drop submit bo_list

This was only used to detect userspace including the same bo multiple
times in a submit.  But ww_mutex can already tell us this.

When we drop struct_mutex around the submit ioctl, we'd otherwise need
to lock the bo before adding it to the bo_list.  But since ww_mutex can
already tell us this, it is simpler just to remove the bo_list.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210728010632.2633470-11-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm/msm: Conversion to drm scheduler

For existing adrenos, there is one or more ringbuffer, depending on
whether preemption is supported.  When preemption is supported, each
ringbuffer has it's own priority.  A submitqueue (which maps to a
gl context or vk queue in userspace) is mapped to a specific ring-
buffer at creation time, based on the submitqueue's priority.

Each ringbuffer has it's own drm_gpu_scheduler.  Each submitqueue
maps to a drm_sched_entity.  And each submit maps to a drm_sched_job.

Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/4
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-10-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>

drm: rcar-du: lvds: Use dev_err_probe()

Simplify error handling by using the dev_err_probe() function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: rcar-du: lvds: Don't set bridge driver_private field

The drm_bridge.driver_private field is set but never used. Don't set it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: rcar-du: Use drm_bridge_connector_init() helper

Use the drm_bridge_connector_init() helper to create a drm_connector for
each output, instead of relying on the bridge drivers doing so. Attach
the bridges with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag to instruct
them not to create a connector.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: rcar-du: dw-hdmi: Set output port number

Report the DT output port number in dw_hdmi_plat_data to connect to the
next bridge in the dw-hdmi driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: rcar-du: lvds: Convert to DRM panel bridge helper

Replace the manual panel handling with usage of the DRM panel bridge
helper. This simplifies the driver, and brings support for
DRM_BRIDGE_ATTACH_NO_CONNECTOR as an added bonus.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: bridge: dw-hdmi: Attach to next bridge if available

On all platforms except i.MX and Rockchip, the dw-hdmi DT bindings
require a video output port connected to an HDMI sink (most likely an
HDMI connector, in rare cases another bridges converting HDMI to another
protocol). For those platforms, retrieve the next bridge and attach it
from the dw-hdmi bridge attach handler.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm/bridge: Centralize error message when bridge attach fails

Being informed of a failure to attach a bridge is useful, and many
drivers prints an error message in that case. Move the message to
drm_bridge_attach() to avoid code duplication.

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>

drm: rcar-du: Shutdown the display on remove

When the device is unbound from the driver (the DU being a platform
device, this occurs either when removing the DU module, or when
unbinding the device manually through sysfs), the display may be active.
Make sure it gets shut down.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>