ASoC: Intel: sof_sdw: remove SOF_SDW_TGL_HDMI for MeteorLake devices

[ Upstream commit 0db94947c9d3da16aa31d152b7d26fab78b02cb9 ]

Topologies support three HDMI links on MeteorLake devices only.

Fixes: 18489174e4fb ("ASoC: intel: sof_sdw: add RT711 SDCA card for MTL platform")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver: soc: xilinx: use _safe loop iterator to avoid a use after free

[ Upstream commit c58da0ba3e5c86e51e2c1557afaf6f71e00c4533 ]

The hash_for_each_possible() loop dereferences "eve_data" to get the
next item on the list.  However the loop frees eve_data so it leads to
a use after free.  Use hash_for_each_possible_safe() instead.

Fixes: c7fdb2404f66 ("drivers: soc: xilinx: add xilinx event management driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/761e0e4a-4caf-4a71-8f47-1c6ad908a848@kili.mountain
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: sharp-ls043t1le01: adjust mode settings

[ Upstream commit dee23b2c9e3ff46d59c5d45e1436eceb878e7c9a ]

Using current settings causes panel flickering on APQ8074 dragonboard.
Adjust panel settings to follow the vendor-provided mode. This also
enables MIPI_DSI_MODE_VIDEO_SYNC_PULSE, which is also specified by the
vendor dtsi for the mentioned dragonboard.

Fixes: ee0172383190 ("drm/panel: Add Sharp LS043T1LE01 MIPI DSI panel")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507172639.2320934-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: sun4i_tcon: use devm_clk_get_enabled in `sun4i_tcon_init_clocks`

[ Upstream commit 123ee07ba5b7123e0ce0e0f9d64938026c16a2ce ]

Smatch reports:
drivers/gpu/drm/sun4i/sun4i_tcon.c:805 sun4i_tcon_init_clocks() warn:
'tcon->clk' from clk_prepare_enable() not released on lines: 792,801.

In the function sun4i_tcon_init_clocks(), tcon->clk and tcon->sclk0 are
not disabled in the error handling, which affects the release of
these variable. Although sun4i_tcon_bind(), which calls
sun4i_tcon_init_clocks(), use sun4i_tcon_free_clocks to disable the
variables mentioned, but the error handling branch of
sun4i_tcon_init_clocks() ignores the required disable process.

To fix this issue, use the devm_clk_get_enabled to automatically
balance enable and disabled calls. As original implementation use
sun4i_tcon_free_clocks() to disable clk explicitly, we delete the
related calls and error handling that are no longer needed.

Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Fixes: b14e945bda8a ("drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init")
Fixes: 8e9240472522 ("drm/sun4i: support TCONs without channel 1")
Fixes: 34d698f6e349 ("drm/sun4i: Add has_channel_0 TCON quirk")
Signed-off-by: XuDong Liu <m202071377@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230430112347.4689-1-m202071377@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: adxl34x - do not hardcode interrupt trigger type

[ Upstream commit e96220bce5176ed2309f77f061dcc0430b82b25e ]

Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_HIGH, let's
respect the settings specified in the firmware description.

Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers")
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20230509203555.549158-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rs9: Fix .driver_data content in i2c_device_id

[ Upstream commit ad527ca87e4ea42d7baad2ce710b44069287931b ]

The .driver_data content in i2c_device_id table must match the
.data content in of_device_id table, else device_get_match_data()
would return bogus value on i2c_device_id match. Align the two
tables.

The i2c_device_id table is now converted from of_device_id using
's@.compatible = "renesas,\([^"]\+"\), .data = \(.*\)@"\1, .driver_data = (kernel_ulong_t)\2@'

Fixes: 892e0ddea1aa ("clk: rs9: Add Renesas 9-series PCIe clock generator driver")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20230507133906.15061-3-marek.vasut+renesas@mailbox.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: vc7: Fix .driver_data content in i2c_device_id

[ Upstream commit b5e10beeafaa3266559c582dde7534ae3fe8cefb ]

The .driver_data content in i2c_device_id table must match the
.data content in of_device_id table, else device_get_match_data()
would return bogus value on i2c_device_id match. Align the two
tables.

The i2c_device_id table is now converted from of_device_id using
's@.compatible = "renesas,\([^"]\+"\), .data = \(.*\)@"\1, .driver_data = (kernel_ulong_t)\2@'

Fixes: 48c5e98fedd9 ("clk: Renesas versaclock7 ccf device driver")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20230507133906.15061-2-marek.vasut+renesas@mailbox.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: vc5: Fix .driver_data content in i2c_device_id

[ Upstream commit be3471c5bd9b921c9adfab7948e8021611639164 ]

The .driver_data content in i2c_device_id table must match the
.data content in of_device_id table, else device_get_match_data()
would return bogus value on i2c_device_id match. Align the two
tables.

The i2c_device_id table is now converted from of_device_id using
's@.compatible = "idt,\([^"]\+"\), .data = \(.*\)@"\1, .driver_data = (kernel_ulong_t)\2@'

Fixes: 9adddb01ce5f ("clk: vc5: Add structure to describe particular chip features")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20230507133906.15061-1-marek.vasut+renesas@mailbox.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page

commit 028725e73375a1ff080bbdf9fb503306d0116f28 upstream.

commit dd0ff4d12dd2 ("bootmem: remove the vmemmap pages from kmemleak in
put_page_bootmem") fix an overlaps existing problem of kmemleak.  But the
problem still existed when HAVE_BOOTMEM_INFO_NODE is disabled, because in
this case, free_bootmem_page() will call free_reserved_page() directly.

Fix the problem by adding kmemleak_free_part() in free_bootmem_page() when
HAVE_BOOTMEM_INFO_NODE is disabled.

Link: https://lkml.kernel.org/r/20230704101942.2819426-1-liushixin2@huawei.com
Fixes: f41f2ed43ca5 ("mm: hugetlb: free the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: vc5: Use `clamp()` to restrict PLL range

[ Upstream commit 3ed741db04f58e8df0d46cec7ecfc4bfd075f047 ]

The VCO frequency needs to be within a certain range and the driver
enforces this.

Make use of the clamp macro to implement this instead of open-coding it.
This makes the code a bit shorter and also semanticly stronger.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230114233500.3294789-1-lars@metafoo.de
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: be3471c5bd9b ("clk: vc5: Fix .driver_data content in i2c_device_id")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm: call arch_swap_restore() from do_swap_page()

commit 6dca4ac6fc91fd41ea4d6c4511838d37f4e0eab2 upstream.

Commit c145e0b47c77 ("mm: streamline COW logic in do_swap_page()") moved
the call to swap_free() before the call to set_pte_at(), which meant that
the MTE tags could end up being freed before set_pte_at() had a chance to
restore them.  Fix it by adding a call to the arch_swap_restore() hook
before the call to swap_free().

Link: https://lkml.kernel.org/r/20230523004312.1807357-2-pcc@google.com
Link: https://linux-review.googlesource.com/id/I6470efa669e8bd2f841049b8c61020c510678965
Fixes: c145e0b47c77 ("mm: streamline COW logic in do_swap_page()")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reported-by: Qun-wei Lin <Qun-wei.Lin@mediatek.com>
Closes: https://lore.kernel.org/all/5050805753ac469e8d727c797c2218a9d780d434.camel@mediatek.com/
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: meson8b: correct uart_B and uart_C clock references

[ Upstream commit d542ce8d4769cdef6a7bc3437e59cfed9c68f0e4 ]

With the current device tree for meson8b, uarts B (e.g. available on pins
8/10 on Odroid-C1) and C (pins 3/5 on Odroid-C1) do not work, because they
are relying on incorrect clocks. Change the references of pclk to the
correct CLKID, to allow use of the two uarts.

Fixes: 3375aa77135f ("ARM: dts: meson8b: Fix the UART device-tree schema validation")
Signed-off-by: Hans-Frieder Vogt <hfdevel@gmx.net>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/trinity-bf20bcb9-790b-4ab9-99e3-0831ef8257f4-1680878185420@3c-app-gmx-bap55
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM5301X: Drop "clock-names" from the SPI node

[ Upstream commit d3c8e2c5757153bbfad70019ec1decbca86f3def ]

There is no such property in the SPI controller binding documentation.
Also Linux driver doesn't look for it.

This fixes:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: spi@18029200: Unevaluated properties are not allowed ('clock-names' was unexpected)
        From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230503122830.3200-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vram-helper: fix function names in vram helper doc

[ Upstream commit b8e392245105b50706f18418054821e71e637288 ]

Refer to drmm_vram_helper_init() instead of the non-existent
drmm_vram_helper_alloc_mm().

Fixes: a5f23a72355d ("drm/vram-helper: Managed vram helpers")
Signed-off-by: Luc Ma <luc@sietium.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/64583db2.630a0220.eb75d.8f51@mx.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358768: fix THS_TRAILCNT computation

[ Upstream commit bac7842cd179572e8e0fc2d7b5254e40c6e9e057 ]

Correct computation of THS_TRAILCNT register.

This register must be set to a value that ensure that
THS_TRAIL > 60 ns + 4 x UI
 and
THS_TRAIL > 8 x UI
 and
THS_TRAIL < TEOT
 with
TEOT = 105 ns + (12 x UI)

with the actual value of THS_TRAIL being

(1 + THS_TRAILCNT) x ByteClk cycle + ((1 to 2) + 2) xHSBYTECLK cycle +
 - (PHY output delay)

with PHY output delay being about

(8 + (5 to 6)) x MIPIBitClk cycle in the BitClk conversion.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-9-francesco@dolcini.it
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358768: fix TXTAGOCNT computation

[ Upstream commit 3666aad8185af8d0ce164fd3c4974235417d6d0b ]

Correct computation of TXTAGOCNT register.

This register must be set to a value that ensure that the
TTA-GO period = (4 x TLPX)

with the actual value of TTA-GO being

4 x (TXTAGOCNT + 1) x (HSByteClk cycle)

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-8-francesco@dolcini.it
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358768: fix THS_ZEROCNT computation

[ Upstream commit 77a089328da791118af9692543a5eedc79eb5fd4 ]

Correct computation of THS_ZEROCNT register.

This register must be set to a value that ensure that
THS_PREPARE + THS_ZERO > 145ns + 10*UI

with the actual value of (THS_PREPARE + THS_ZERO) being

((1 to 2) + 1 + (TCLK_ZEROCNT + 1) + (3 to 4)) x ByteClk cycle +
  + HSByteClk x (2 + (1 to 2)) + (PHY delay)

with PHY delay being about

(8 + (5 to 6)) x MIPIBitClk cycle in the BitClk conversion.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-7-francesco@dolcini.it
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358768: fix TCLK_TRAILCNT computation

[ Upstream commit ee18698e212b1659dd0850d7e2ae0f22e16ed3d3 ]

Correct computation of TCLK_TRAILCNT register.

The driver does not implement non-continuous clock mode, so the actual
value doesn't make a practical difference yet. However this change also
ensures that the value does not write to reserved registers bits in case
of under/overflow.

This register must be set to a value that ensures that

TCLK-TRAIL > 60ns
 and
TEOT <= (105 ns + 12 x UI)

with the actual value of TCLK-TRAIL being

(TCLK_TRAILCNT + (1 to 2)) xHSByteClkCycle +
 (2 + (1 to 2)) * HSBYTECLKCycle - (PHY output delay)

with PHY output delay being about

(2 to 3) x MIPIBitClk cycle in the BitClk conversion.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358768: Add atomic_get_input_bus_fmts() implementation

[ Upstream commit cec5ccef85bd0128cf895612de54a9d21d2015d0 ]

Add atomic_get_input_bus_fmts() implementation, tc358768 has a parallel
RGB input interface with the actual bus format depending on the amount
of parallel input data lines.

Without this change when the tc358768 is used with less than 24bit the
color mapping is completely wrong.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330095941.428122-7-francesco@dolcini.it
Stable-dep-of: ee18698e212b ("drm/bridge: tc358768: fix TCLK_TRAILCNT computation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358768: fix TCLK_ZEROCNT computation

[ Upstream commit f9cf811374f42fca31ac34aaf59ee2ae72b89879 ]

Correct computation of TCLK_ZEROCNT register.

This register must be set to a value that ensure that
(TCLK-PREPARECNT + TCLK-ZERO) > 300ns

with the actual value of (TCLK-PREPARECNT + TCLK-ZERO) being

(1 to 2) + (TCLK_ZEROCNT + 1)) x HSByteClkCycle + (PHY output delay)

with PHY output delay being about

(2 to 3) x MIPIBitClk cycle in the BitClk conversion.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-5-francesco@dolcini.it
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358768: fix PLL target frequency

[ Upstream commit ffd2e4bbea626d565b9817312b0fcfb382fecb88 ]

Correctly compute the PLL target frequency, the current formula works
correctly only when the input bus width is 24bit, actually to properly
compute the PLL target frequency what is relevant is the bits-per-pixel
on the DSI link.

No regression expected since the DSI format is currently hard-coded as
MIPI_DSI_FMT_RGB888.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-4-francesco@dolcini.it
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358768: fix PLL parameters computation

[ Upstream commit 6a4020b4c63911977aaf8047f904a300d15de739 ]

According to Toshiba documentation the PLL input clock after the divider
should be not less than 4MHz, fix the PLL parameters computation
accordingly.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-3-francesco@dolcini.it
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358768: always enable HS video mode

[ Upstream commit 75a8aeac2573ab258c53676eba9b3796ea691988 ]

Always enable HS video mode setting the TXMD bit, without this change no
video output is present with DSI sinks that are setting
MIPI_DSI_MODE_LPM flag (tested with LT8912B DSI-HDMI bridge).

Previously the driver was enabling HS mode only when the DSI sink was
not explicitly setting the MIPI_DSI_MODE_LPM, however this is not
correct.

The MIPI_DSI_MODE_LPM is supposed to indicate that the sink is willing
to receive data in low power mode, however clearing the
TC358768_DSI_CONTROL_TXMD bit will make the TC358768 send video in
LP mode that is not the intended behavior.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427142934.55435-2-francesco@dolcini.it
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: ti-sn65dsi83: Fix enable error path

[ Upstream commit 8a91b29f1f50ce7742cdbe5cf11d17f128511f3f ]

If PLL locking failed, the regulator needs to be disabled again.

Fixes: 5664e3c907e2 ("drm/bridge: ti-sn65dsi83: Add vcc supply regulator support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504065316.2640739-1-alexander.stein@ew.tq-group.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: drv260x - sleep between polling GO bit

[ Upstream commit efef661dfa6bf8cbafe4cd6a97433fcef0118967 ]

When doing the initial startup there's no need to poll without any
delay and spam the I2C bus.

Let's sleep 15ms between each attempt, which is the same time as used
in the vendor driver.

Fixes: 7132fe4f5687 ("Input: drv260x - add TI drv260x haptics driver")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230430-drv260x-improvements-v1-2-1fb28b4cc698@z3ntu.xyz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: it6505: Move a variable assignment behind a null pointer check in receive_timing_debugfs_show()

[ Upstream commit 0be05a75de2916421e88e0d64b001984f54df0bd ]

The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “receive_timing_debugfs_show”.

Thus avoid the risk for undefined behaviour by moving the assignment
for the variable “vid” behind the null pointer check.

This issue was detected by using the Coccinelle software.

Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patchwork.freedesktop.org/patch/msgid/fa69384f-1485-142b-c4ee-3df54ac68a89@web.de
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Explicitly specify update type per plane info change

[ Upstream commit 710cc1e7cd461446a9325c9bd1e9a54daa462952 ]

[Why]
The bit for flip addr is being set causing the determination for
FAST vs MEDIUM to always return MEDIUM when plane info is provided
as a surface update. This causes extreme stuttering for the typical
atomic update path on Linux.

[How]
Don't use update_flags->raw for determining FAST vs MEDIUM. It's too
fragile to changes like this.

Explicitly specify the update type per update flag instead. It's not
as clever as checking the bits itself but at least it's correct.

Fixes: aa5fdb1ab5b6 ("drm/amd/display: Explicitly specify update type per plane info change")
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

radeon: avoid double free in ci_dpm_init()

[ Upstream commit 20c3dffdccbd494e0dd631d1660aeecbff6775f2 ]

Several calls to ci_dpm_fini() will attempt to free resources that
either have been freed before or haven't been allocated yet. This
may lead to undefined or dangerous behaviour.

For instance, if r600_parse_extended_power_table() fails, it might
call r600_free_extended_power_table() as will ci_dpm_fini() later
during error handling.

Fix this by only freeing pointers to objects previously allocated.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Add logging for display MALL refresh setting

[ Upstream commit cd8f067a46d34dee3188da184912ae3d64d98444 ]

[WHY]
Add log entry for when display refresh from MALL
settings are sent to SMU.

Fixes: 1664641ea946 ("drm/amd/display: Add logger for SMU msg")
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlink: Add __sock_i_ino() for __netlink_diag_dump().

[ Upstream commit 25a9c8a4431c364f97f75558cb346d2ad3f53fbb ]

syzbot reported a warning in __local_bh_enable_ip(). [0]

Commit 8d61f926d420 ("netlink: fix potential deadlock in
netlink_set_err()") converted read_lock(&nl_table_lock) to
read_lock_irqsave() in __netlink_diag_dump() to prevent a deadlock.

However, __netlink_diag_dump() calls sock_i_ino() that uses
read_lock_bh() and read_unlock_bh().  If CONFIG_TRACE_IRQFLAGS=y,
read_unlock_bh() finally enables IRQ even though it should stay
disabled until the following read_unlock_irqrestore().

Using read_lock() in sock_i_ino() would trigger a lockdep splat
in another place that was fixed in commit f064af1e500a ("net: fix
a lockdep splat"), so let's add __sock_i_ino() that would be safe
to use under BH disabled.

[0]:
WARNING: CPU: 0 PID: 5012 at kernel/softirq.c:376 __local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
Modules linked in:
CPU: 0 PID: 5012 Comm: syz-executor487 Not tainted 6.4.0-rc7-syzkaller-00202-g6f68fc395f49 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
RIP: 0010:__local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
Code: 45 bf 01 00 00 00 e8 91 5b 0a 00 e8 3c 15 3d 00 fb 65 8b 05 ec e9 b5 7e 85 c0 74 58 5b 5d c3 65 8b 05 b2 b6 b4 7e 85 c0 75 a2 <0f> 0b eb 9e e8 89 15 3d 00 eb 9f 48 89 ef e8 6f 49 18 00 eb a8 0f
RSP: 0018:ffffc90003a1f3d0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000201 RCX: 1ffffffff1cf5996
RDX: 0000000000000000 RSI: 0000000000000201 RDI: ffffffff8805c6f3
RBP: ffffffff8805c6f3 R08: 0000000000000001 R09: ffff8880152b03a3
R10: ffffed1002a56074 R11: 0000000000000005 R12: 00000000000073e4
R13: dffffc0000000000 R14: 0000000000000002 R15: 0000000000000000
FS:  0000555556726300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000045ad50 CR3: 000000007c646000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 sock_i_ino+0x83/0xa0 net/core/sock.c:2559
 __netlink_diag_dump+0x45c/0x790 net/netlink/diag.c:171
 netlink_diag_dump+0xd6/0x230 net/netlink/diag.c:207
 netlink_dump+0x570/0xc50 net/netlink/af_netlink.c:2269
 __netlink_dump_start+0x64b/0x910 net/netlink/af_netlink.c:2374
 netlink_dump_start include/linux/netlink.h:329 [inline]
 netlink_diag_handler_dump+0x1ae/0x250 net/netlink/diag.c:238
 __sock_diag_cmd net/core/sock_diag.c:238 [inline]
 sock_diag_rcv_msg+0x31e/0x440 net/core/sock_diag.c:269
 netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2547
 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280
 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
 netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365
 netlink_sendmsg+0x925/0xe30 net/netlink/af_netlink.c:1914
 sock_sendmsg_nosec net/socket.c:724 [inline]
 sock_sendmsg+0xde/0x190 net/socket.c:747
 ____sys_sendmsg+0x71c/0x900 net/socket.c:2503
 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2557
 __sys_sendmsg+0xf7/0x1c0 net/socket.c:2586
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5303aaabb9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc7506e548 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5303aaabb9
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00007f5303a6ed60 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5303a6edf0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>

Fixes: 8d61f926d420 ("netlink: fix potential deadlock in netlink_set_err()")
Reported-by: syzbot+5da61cf6a9bc1902d422@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=5da61cf6a9bc1902d422
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230626164313.52528-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipvlan: Fix return value of ipvlan_queue_xmit()

[ Upstream commit 8a9922e7be6d042fa00f894c376473b17a162b66 ]

ipvlan_queue_xmit() should return NET_XMIT_XXX, but
ipvlan_xmit_mode_l2/l3() returns rx_handler_result_t or NET_RX_XXX
in some cases. ipvlan_rcv_frame() will only return RX_HANDLER_CONSUMED
in ipvlan_xmit_mode_l2/l3() because 'local' is true. It's equal to
NET_XMIT_SUCCESS. But dev_forward_skb() can return NET_RX_SUCCESS or
NET_RX_DROP, and returning NET_RX_DROP(NET_XMIT_DROP) will increase
both ipvlan and ipvlan->phy_dev drops counter.

The skb to forward can be treated as xmitted successfully. This patch
makes ipvlan_queue_xmit() return NET_XMIT_SUCCESS for forward skb.

Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230626093347.7492-1-cambda@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_conntrack_sip: fix the ct_sip_parse_numerical_param() return value.

[ Upstream commit f188d30087480eab421cd8ca552fb15f55d57f4d ]

ct_sip_parse_numerical_param() returns only 0 or 1 now.
But process_register_request() and process_register_response() imply
checking for a negative value if parsing of a numerical header parameter
failed.
The invocation in nf_nat_sip() looks correct:
  if (ct_sip_parse_numerical_param(...) > 0 &&
      ...) { ... }

Make the return value of the function ct_sip_parse_numerical_param()
a tristate to fix all the cases
a) return 1 if value is found; *val is set
b) return 0 if value is not found; *val is unchanged
c) return -1 on error; *val is undefined

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: 0f32a40fc91a ("[NETFILTER]: nf_conntrack_sip: create signalling expectations")
Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: dccp: copy entire header to stack buffer, not just basic one

[ Upstream commit ff0a3a7d52ff7282dbd183e7fc29a1fe386b0c30 ]

Eric Dumazet says:
  nf_conntrack_dccp_packet() has an unique:

  dh = skb_header_pointer(skb, dataoff, sizeof(_dh), &_dh);

  And nothing more is 'pulled' from the packet, depending on the content.
  dh->dccph_doff, and/or dh->dccph_x ...)
  So dccp_ack_seq() is happily reading stuff past the _dh buffer.

BUG: KASAN: stack-out-of-bounds in nf_conntrack_dccp_packet+0x1134/0x11c0
Read of size 4 at addr ffff000128f66e0c by task syz-executor.2/29371
[..]

Fix this by increasing the stack buffer to also include room for
the extra sequence numbers and all the known dccp packet type headers,
then pull again after the initial validation of the basic header.

While at it, mark packets invalid that lack 48bit sequence bit but
where RFC says the type MUST use them.

Compile tested only.

v2: first skb_header_pointer() now needs to adjust the size to
    only pull the generic header. (Eric)

Heads-up: I intend to remove dccp conntrack support later this year.

Fixes: 2bc780499aa3 ("[NETFILTER]: nf_conntrack: add DCCP protocol support")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/ts_bm: reset initial match offset for every block of text

[ Upstream commit 6f67fbf8192da80c4db01a1800c7fceaca9cf1f9 ]

The `shift` variable which indicates the offset in the string at which
to start matching the pattern is initialized to `bm->patlen - 1`, but it
is not reset when a new block is retrieved.  This means the implemen-
tation may start looking at later and later positions in each successive
block and miss occurrences of the pattern at the beginning.  E.g.,
consider a HTTP packet held in a non-linear skb, where the HTTP request
line occurs in the second block:

  [... 52 bytes of packet headers ...]
  GET /bmtest HTTP/1.1\r\nHost: www.example.com\r\n\r\n

and the pattern is "GET /bmtest".

Once the first block comprising the packet headers has been examined,
`shift` will be pointing to somewhere near the end of the block, and so
when the second block is examined the request line at the beginning will
be missed.

Reinitialize the variable for each new block.

Fixes: 8082e4ed0a61 ("[LIB]: Boyer-Moore extension for textsearch infrastructure strike #2")
Link: https://bugzilla.netfilter.org/show_bug.cgi?id=1390
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: nfc: Fix use-after-free caused by nfc_llcp_find_local

[ Upstream commit 6709d4b7bc2e079241fdef15d1160581c5261c10 ]

This commit fixes several use-after-free that caused by function
nfc_llcp_find_local(). For example, one UAF can happen when below buggy
time window occurs.

// nfc_genl_llc_get_params   | // nfc_unregister_device
                             |
dev = nfc_get_device(idx);   | device_lock(...)
if (!dev)                    | dev->shutting_down = true;
    return -ENODEV;          | device_unlock(...);
                             |
device_lock(...);            |   // nfc_llcp_unregister_device
                             |   nfc_llcp_find_local()
nfc_llcp_find_local(...);    |
                             |   local_cleanup()
if (!local) {                |
    rc = -ENODEV;            |     // nfc_llcp_local_put
    goto exit;               |     kref_put(.., local_release)
}                            |
                             |       // local_release
                             |       list_del(&local->list)
  // nfc_genl_send_params    |       kfree()
  local->dev->idx !!!UAF!!!  |
                             |

and the crash trace for the one of the discussed UAF like:

BUG: KASAN: slab-use-after-free in nfc_genl_llc_get_params+0x72f/0x780  net/nfc/netlink.c:1045
Read of size 8 at addr ffff888105b0e410 by task 20114

Call Trace:
 <TASK>
 __dump_stack  lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x72/0xa0  lib/dump_stack.c:106
 print_address_description  mm/kasan/report.c:319 [inline]
 print_report+0xcc/0x620  mm/kasan/report.c:430
 kasan_report+0xb2/0xe0  mm/kasan/report.c:536
 nfc_genl_send_params  net/nfc/netlink.c:999 [inline]
 nfc_genl_llc_get_params+0x72f/0x780  net/nfc/netlink.c:1045
 genl_family_rcv_msg_doit.isra.0+0x1ee/0x2e0  net/netlink/genetlink.c:968
 genl_family_rcv_msg  net/netlink/genetlink.c:1048 [inline]
 genl_rcv_msg+0x503/0x7d0  net/netlink/genetlink.c:1065
 netlink_rcv_skb+0x161/0x430  net/netlink/af_netlink.c:2548
 genl_rcv+0x28/0x40  net/netlink/genetlink.c:1076
 netlink_unicast_kernel  net/netlink/af_netlink.c:1339 [inline]
 netlink_unicast+0x644/0x900  net/netlink/af_netlink.c:1365
 netlink_sendmsg+0x934/0xe70  net/netlink/af_netlink.c:1913
 sock_sendmsg_nosec  net/socket.c:724 [inline]
 sock_sendmsg+0x1b6/0x200  net/socket.c:747
 ____sys_sendmsg+0x6e9/0x890  net/socket.c:2501
 ___sys_sendmsg+0x110/0x1b0  net/socket.c:2555
 __sys_sendmsg+0xf7/0x1d0  net/socket.c:2584
 do_syscall_x64  arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3f/0x90  arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f34640a2389
RSP: 002b:00007f3463415168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f34641c1f80 RCX: 00007f34640a2389
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000006
RBP: 00007f34640ed493 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffe38449ecf R14: 00007f3463415300 R15: 0000000000022000
 </TASK>

Allocated by task 20116:
 kasan_save_stack+0x22/0x50  mm/kasan/common.c:45
 kasan_set_track+0x25/0x30  mm/kasan/common.c:52
 ____kasan_kmalloc  mm/kasan/common.c:374 [inline]
 __kasan_kmalloc+0x7f/0x90  mm/kasan/common.c:383
 kmalloc  include/linux/slab.h:580 [inline]
 kzalloc  include/linux/slab.h:720 [inline]
 nfc_llcp_register_device+0x49/0xa40  net/nfc/llcp_core.c:1567
 nfc_register_device+0x61/0x260  net/nfc/core.c:1124
 nci_register_device+0x776/0xb20  net/nfc/nci/core.c:1257
 virtual_ncidev_open+0x147/0x230  drivers/nfc/virtual_ncidev.c:148
 misc_open+0x379/0x4a0  drivers/char/misc.c:165
 chrdev_open+0x26c/0x780  fs/char_dev.c:414
 do_dentry_open+0x6c4/0x12a0  fs/open.c:920
 do_open  fs/namei.c:3560 [inline]
 path_openat+0x24fe/0x37e0  fs/namei.c:3715
 do_filp_open+0x1ba/0x410  fs/namei.c:3742
 do_sys_openat2+0x171/0x4c0  fs/open.c:1356
 do_sys_open  fs/open.c:1372 [inline]
 __do_sys_openat  fs/open.c:1388 [inline]
 __se_sys_openat  fs/open.c:1383 [inline]
 __x64_sys_openat+0x143/0x200  fs/open.c:1383
 do_syscall_x64  arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3f/0x90  arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

Freed by task 20115:
 kasan_save_stack+0x22/0x50  mm/kasan/common.c:45
 kasan_set_track+0x25/0x30  mm/kasan/common.c:52
 kasan_save_free_info+0x2e/0x50  mm/kasan/generic.c:521
 ____kasan_slab_free  mm/kasan/common.c:236 [inline]
 ____kasan_slab_free  mm/kasan/common.c:200 [inline]
 __kasan_slab_free+0x10a/0x190  mm/kasan/common.c:244
 kasan_slab_free  include/linux/kasan.h:162 [inline]
 slab_free_hook  mm/slub.c:1781 [inline]
 slab_free_freelist_hook  mm/slub.c:1807 [inline]
 slab_free  mm/slub.c:3787 [inline]
 __kmem_cache_free+0x7a/0x190  mm/slub.c:3800
 local_release  net/nfc/llcp_core.c:174 [inline]
 kref_put  include/linux/kref.h:65 [inline]
 nfc_llcp_local_put  net/nfc/llcp_core.c:182 [inline]
 nfc_llcp_local_put  net/nfc/llcp_core.c:177 [inline]
 nfc_llcp_unregister_device+0x206/0x290  net/nfc/llcp_core.c:1620
 nfc_unregister_device+0x160/0x1d0  net/nfc/core.c:1179
 virtual_ncidev_close+0x52/0xa0  drivers/nfc/virtual_ncidev.c:163
 __fput+0x252/0xa20  fs/file_table.c:321
 task_work_run+0x174/0x270  kernel/task_work.c:179
 resume_user_mode_work  include/linux/resume_user_mode.h:49 [inline]
 exit_to_user_mode_loop  kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x108/0x110  kernel/entry/common.c:204
 __syscall_exit_to_user_mode_work  kernel/entry/common.c:286 [inline]
 syscall_exit_to_user_mode+0x21/0x50  kernel/entry/common.c:297
 do_syscall_64+0x4c/0x90  arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

Last potentially related work creation:
 kasan_save_stack+0x22/0x50  mm/kasan/common.c:45
 __kasan_record_aux_stack+0x95/0xb0  mm/kasan/generic.c:491
 kvfree_call_rcu+0x29/0xa80  kernel/rcu/tree.c:3328
 drop_sysctl_table+0x3be/0x4e0  fs/proc/proc_sysctl.c:1735
 unregister_sysctl_table.part.0+0x9c/0x190  fs/proc/proc_sysctl.c:1773
 unregister_sysctl_table+0x24/0x30  fs/proc/proc_sysctl.c:1753
 neigh_sysctl_unregister+0x5f/0x80  net/core/neighbour.c:3895
 addrconf_notify+0x140/0x17b0  net/ipv6/addrconf.c:3684
 notifier_call_chain+0xbe/0x210  kernel/notifier.c:87
 call_netdevice_notifiers_info+0xb5/0x150  net/core/dev.c:1937
 call_netdevice_notifiers_extack  net/core/dev.c:1975 [inline]
 call_netdevice_notifiers  net/core/dev.c:1989 [inline]
 dev_change_name+0x3c3/0x870  net/core/dev.c:1211
 dev_ifsioc+0x800/0xf70  net/core/dev_ioctl.c:376
 dev_ioctl+0x3d9/0xf80  net/core/dev_ioctl.c:542
 sock_do_ioctl+0x160/0x260  net/socket.c:1213
 sock_ioctl+0x3f9/0x670  net/socket.c:1316
 vfs_ioctl  fs/ioctl.c:51 [inline]
 __do_sys_ioctl  fs/ioctl.c:870 [inline]
 __se_sys_ioctl  fs/ioctl.c:856 [inline]
 __x64_sys_ioctl+0x19e/0x210  fs/ioctl.c:856
 do_syscall_x64  arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3f/0x90  arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

The buggy address belongs to the object at ffff888105b0e400
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 16 bytes inside of
 freed 1024-byte region [ffff888105b0e400, ffff888105b0e800)

The buggy address belongs to the physical page:
head:ffffea000416c200 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x200000000010200(slab|head|node=0|zone=2)
raw: 0200000000010200 ffff8881000430c0 ffffea00044c7010 ffffea0004510e10
raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888105b0e300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff888105b0e380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888105b0e400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                         ^
 ffff888105b0e480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888105b0e500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

In summary, this patch solves those use-after-free by

1. Re-implement the nfc_llcp_find_local(). The current version does not
grab the reference when getting the local from the linked list.  For
example, the llcp_sock_bind() gets the reference like below:

// llcp_sock_bind()

    local = nfc_llcp_find_local(dev); // A
    ..... \
           | raceable
    ..... /
    llcp_sock->local = nfc_llcp_local_get(local); // B

There is an apparent race window that one can  drop the reference
and free the local object fetched in (A) before (B) gets the reference.

2. Some callers of the nfc_llcp_find_local() do not grab the reference
at all. For example, the nfc_genl_llc_{{get/set}_params/sdreq} functions.
We add the nfc_llcp_local_put() for them. Moreover, we add the necessary
error handling function to put the reference.

3. Add the nfc_llcp_remove_local() helper. The local object is removed
from the linked list in local_release() when all reference is gone. This
patch removes it when nfc_llcp_unregister_device() is called.

Therefore, every caller of nfc_llcp_find_local() will get a reference
even when the nfc_llcp_unregister_device() is called. This promises no
use-after-free for the local object is ever possible.

Fixes: 52feb444a903 ("NFC: Extend netlink interface for LTO, RW, and MIUX parameters support")
Fixes: c7aa12252f51 ("NFC: Take a reference on the LLCP local pointer when creating a socket")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: fix crash when reading stats while NIC is resetting

[ Upstream commit d1b355438b8325a486f087e506d412c4e852f37b ]

efx_net_stats() (.ndo_get_stats64) can be called during an ethtool
 selftest, during which time nic_data->mc_stats is NULL as the NIC has
 been fini'd.  In this case do not attempt to fetch the latest stats
 from the hardware, else we will crash on a NULL dereference:
    BUG: kernel NULL pointer dereference, address: 0000000000000038
    RIP efx_nic_update_stats
    abridged calltrace:
    efx_ef10_update_stats_pf
    efx_net_stats
    dev_get_stats
    dev_seq_printf_stats
Skipping the read is safe, we will simply give out stale stats.
To ensure that the free in efx_ef10_fini_nic() does not race against
 efx_ef10_update_stats_pf(), which could cause a TOCTTOU bug, take the
 efx->stats_lock in fini_nic (it is already held across update_stats).

Fixes: d3142c193dca ("sfc: refactor EF10 stats handling")
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ocfs2: Fix use of slab data with sendpage

[ Upstream commit 86d7bd6e66e9925f0f04a7bcf3c92c05fdfefb5a ]

ocfs2 uses kzalloc() to allocate buffers for o2net_hand, o2net_keep_req and
o2net_keep_resp and then passes these to sendpage.  This isn't really
allowed as the lifetime of slab objects is not controlled by page ref -
though in this case it will probably work.  sendmsg() with MSG_SPLICE_PAGES
will, however, print a warning and give an error.

Fix it to use folio_alloc() instead to allocate a buffer for the handshake
message, keepalive request and reply messages.

Fixes: 98211489d414 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Mark Fasheh <mark@fasheh.com>
cc: Kurt Hackel <kurt.hackel@oracle.com>
cc: Joel Becker <jlbec@evilplan.org>
cc: Joseph Qi <joseph.qi@linux.alibaba.com>
cc: ocfs2-devel@oss.oracle.com
Link: https://lore.kernel.org/r/20230623225513.2732256-14-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: axienet: Move reset before 64-bit DMA detection

[ Upstream commit f1bc9fc4a06de0108e0dca2a9a7e99ba1fc632f9 ]

64-bit DMA detection will fail if axienet was started before (by boot
loader, boot ROM, etc). In this state axienet will not start properly.
XAXIDMA_TX_CDESC_OFFSET + 4 register (MM2S_CURDESC_MSB) is used to detect
64-bit DMA capability here. But datasheet says: When DMACR.RS is 1
(axienet is in enabled state), CURDESC_PTR becomes Read Only (RO) and
is used to fetch the first descriptor. So iowrite32()/ioread32() trick
to this register to detect 64-bit DMA will not work.
So move axienet reset before 64-bit DMA detection.

Fixes: f735c40ed93c ("net: axienet: Autodetect 64-bit DMA capability")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20230622192245.116864-1-fido_max@inbox.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gtp: Fix use-after-free in __gtp_encap_destroy().

[ Upstream commit ce3aee7114c575fab32a5e9e939d4bbb3dcca79f ]

syzkaller reported use-after-free in __gtp_encap_destroy(). [0]

It shows the same process freed sk and touched it illegally.

Commit e198987e7dd7 ("gtp: fix suspicious RCU usage") added lock_sock()
and release_sock() in __gtp_encap_destroy() to protect sk->sk_user_data,
but release_sock() is called after sock_put() releases the last refcnt.

[0]:
BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
BUG: KASAN: slab-use-after-free in atomic_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:541 [inline]
BUG: KASAN: slab-use-after-free in queued_spin_lock include/asm-generic/qspinlock.h:111 [inline]
BUG: KASAN: slab-use-after-free in do_raw_spin_lock include/linux/spinlock.h:186 [inline]
BUG: KASAN: slab-use-after-free in __raw_spin_lock_bh include/linux/spinlock_api_smp.h:127 [inline]
BUG: KASAN: slab-use-after-free in _raw_spin_lock_bh+0x75/0xe0 kernel/locking/spinlock.c:178
Write of size 4 at addr ffff88800dbef398 by task syz-executor.2/2401

CPU: 1 PID: 2401 Comm: syz-executor.2 Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x72/0xa0 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:351 [inline]
 print_report+0xcc/0x620 mm/kasan/report.c:462
 kasan_report+0xb2/0xe0 mm/kasan/report.c:572
 check_region_inline mm/kasan/generic.c:181 [inline]
 kasan_check_range+0x39/0x1c0 mm/kasan/generic.c:187
 instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
 atomic_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:541 [inline]
 queued_spin_lock include/asm-generic/qspinlock.h:111 [inline]
 do_raw_spin_lock include/linux/spinlock.h:186 [inline]
 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:127 [inline]
 _raw_spin_lock_bh+0x75/0xe0 kernel/locking/spinlock.c:178
 spin_lock_bh include/linux/spinlock.h:355 [inline]
 release_sock+0x1f/0x1a0 net/core/sock.c:3526
 gtp_encap_disable_sock drivers/net/gtp.c:651 [inline]
 gtp_encap_disable+0xb9/0x220 drivers/net/gtp.c:664
 gtp_dev_uninit+0x19/0x50 drivers/net/gtp.c:728
 unregister_netdevice_many_notify+0x97e/0x1520 net/core/dev.c:10841
 rtnl_delete_link net/core/rtnetlink.c:3216 [inline]
 rtnl_dellink+0x3c0/0xb30 net/core/rtnetlink.c:3268
 rtnetlink_rcv_msg+0x450/0xb10 net/core/rtnetlink.c:6423
 netlink_rcv_skb+0x15d/0x450 net/netlink/af_netlink.c:2548
 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
 netlink_unicast+0x700/0x930 net/netlink/af_netlink.c:1365
 netlink_sendmsg+0x91c/0xe30 net/netlink/af_netlink.c:1913
 sock_sendmsg_nosec net/socket.c:724 [inline]
 sock_sendmsg+0x1b7/0x200 net/socket.c:747
 ____sys_sendmsg+0x75a/0x990 net/socket.c:2493
 ___sys_sendmsg+0x11d/0x1c0 net/socket.c:2547
 __sys_sendmsg+0xfe/0x1d0 net/socket.c:2576
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f1168b1fe5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007f1167edccc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f1168b1fe5d
RDX: 0000000000000000 RSI: 00000000200002c0 RDI: 0000000000000003
RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f1168b80530 R15: 0000000000000000
 </TASK>

Allocated by task 1483:
 kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 __kasan_slab_alloc+0x59/0x70 mm/kasan/common.c:328
 kasan_slab_alloc include/linux/kasan.h:186 [inline]
 slab_post_alloc_hook mm/slab.h:711 [inline]
 slab_alloc_node mm/slub.c:3451 [inline]
 slab_alloc mm/slub.c:3459 [inline]
 __kmem_cache_alloc_lru mm/slub.c:3466 [inline]
 kmem_cache_alloc+0x16d/0x340 mm/slub.c:3475
 sk_prot_alloc+0x5f/0x280 net/core/sock.c:2073
 sk_alloc+0x34/0x6c0 net/core/sock.c:2132
 inet6_create net/ipv6/af_inet6.c:192 [inline]
 inet6_create+0x2c7/0xf20 net/ipv6/af_inet6.c:119
 __sock_create+0x2a1/0x530 net/socket.c:1535
 sock_create net/socket.c:1586 [inline]
 __sys_socket_create net/socket.c:1623 [inline]
 __sys_socket_create net/socket.c:1608 [inline]
 __sys_socket+0x137/0x250 net/socket.c:1651
 __do_sys_socket net/socket.c:1664 [inline]
 __se_sys_socket net/socket.c:1662 [inline]
 __x64_sys_socket+0x72/0xb0 net/socket.c:1662
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

Freed by task 2401:
 kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 kasan_save_free_info+0x2e/0x50 mm/kasan/generic.c:521
 ____kasan_slab_free mm/kasan/common.c:236 [inline]
 ____kasan_slab_free mm/kasan/common.c:200 [inline]
 __kasan_slab_free+0x10c/0x1b0 mm/kasan/common.c:244
 kasan_slab_free include/linux/kasan.h:162 [inline]
 slab_free_hook mm/slub.c:1781 [inline]
 slab_free_freelist_hook mm/slub.c:1807 [inline]
 slab_free mm/slub.c:3786 [inline]
 kmem_cache_free+0xb4/0x490 mm/slub.c:3808
 sk_prot_free net/core/sock.c:2113 [inline]
 __sk_destruct+0x500/0x720 net/core/sock.c:2207
 sk_destruct+0xc1/0xe0 net/core/sock.c:2222
 __sk_free+0xed/0x3d0 net/core/sock.c:2233
 sk_free+0x7c/0xa0 net/core/sock.c:2244
 sock_put include/net/sock.h:1981 [inline]
 __gtp_encap_destroy+0x165/0x1b0 drivers/net/gtp.c:634
 gtp_encap_disable_sock drivers/net/gtp.c:651 [inline]
 gtp_encap_disable+0xb9/0x220 drivers/net/gtp.c:664
 gtp_dev_uninit+0x19/0x50 drivers/net/gtp.c:728
 unregister_netdevice_many_notify+0x97e/0x1520 net/core/dev.c:10841
 rtnl_delete_link net/core/rtnetlink.c:3216 [inline]
 rtnl_dellink+0x3c0/0xb30 net/core/rtnetlink.c:3268
 rtnetlink_rcv_msg+0x450/0xb10 net/core/rtnetlink.c:6423
 netlink_rcv_skb+0x15d/0x450 net/netlink/af_netlink.c:2548
 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
 netlink_unicast+0x700/0x930 net/netlink/af_netlink.c:1365
 netlink_sendmsg+0x91c/0xe30 net/netlink/af_netlink.c:1913
 sock_sendmsg_nosec net/socket.c:724 [inline]
 sock_sendmsg+0x1b7/0x200 net/socket.c:747
 ____sys_sendmsg+0x75a/0x990 net/socket.c:2493
 ___sys_sendmsg+0x11d/0x1c0 net/socket.c:2547
 __sys_sendmsg+0xfe/0x1d0 net/socket.c:2576
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

The buggy address belongs to the object at ffff88800dbef300
 which belongs to the cache UDPv6 of size 1344
The buggy address is located 152 bytes inside of
 freed 1344-byte region [ffff88800dbef300, ffff88800dbef840)

The buggy address belongs to the physical page:
page:00000000d31bfed5 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800dbeed40 pfn:0xdbe8
head:00000000d31bfed5 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
memcg:ffff888008ee0801
flags: 0x100000000010200(slab|head|node=0|zone=1)
page_type: 0xffffffff()
raw: 0100000000010200 ffff88800c7a3000 dead000000000122 0000000000000000
raw: ffff88800dbeed40 0000000080160015 00000001ffffffff ffff888008ee0801
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88800dbef280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88800dbef300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88800dbef380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                            ^
 ffff88800dbef400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88800dbef480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: e198987e7dd7 ("gtp: fix suspicious RCU usage")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20230622213231.24651-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: rtnetlink: remove netdevsim device after ipsec offload test

[ Upstream commit 5f789f103671fec3733ebe756e56adf15c90c21d ]

On systems where netdevsim is built-in or loaded before the test
starts, kci_test_ipsec_offload doesn't remove the netdevsim device it
created during the test.

Fixes: e05b2d141fef ("netdevsim: move netdev creation/destruction to dev probe")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/e1cb94f4f82f4eca4a444feec4488a1323396357.1687466906.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: do not assume skb mac_header is set

[ Upstream commit 6a940abdef3162e5723f1495b8a49859d1708f79 ]

Drivers must not assume in their ndo_start_xmit() that
skbs have their mac_header set. skb->data is all what is needed.

bonding seems to be one of the last offender as caught by syzbot:

WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 skb_mac_offset include/linux/skbuff.h:2913 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_xmit_hash drivers/net/bonding/bond_main.c:4170 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5149 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_3ad_xor_xmit drivers/net/bonding/bond_main.c:5186 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 __bond_start_xmit drivers/net/bonding/bond_main.c:5442 [inline]
WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_start_xmit+0x14ab/0x19d0 drivers/net/bonding/bond_main.c:5470
Modules linked in:
CPU: 1 PID: 12155 Comm: syz-executor.3 Not tainted 6.1.30-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
RIP: 0010:skb_mac_header include/linux/skbuff.h:2907 [inline]
RIP: 0010:skb_mac_offset include/linux/skbuff.h:2913 [inline]
RIP: 0010:bond_xmit_hash drivers/net/bonding/bond_main.c:4170 [inline]
RIP: 0010:bond_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5149 [inline]
RIP: 0010:bond_3ad_xor_xmit drivers/net/bonding/bond_main.c:5186 [inline]
RIP: 0010:__bond_start_xmit drivers/net/bonding/bond_main.c:5442 [inline]
RIP: 0010:bond_start_xmit+0x14ab/0x19d0 drivers/net/bonding/bond_main.c:5470
Code: 8b 7c 24 30 e8 76 dd 1a 01 48 85 c0 74 0d 48 89 c3 e8 29 67 2e fe e9 15 ef ff ff e8 1f 67 2e fe e9 10 ef ff ff e8 15 67 2e fe <0f> 0b e9 45 f8 ff ff e8 09 67 2e fe e9 dc fa ff ff e8 ff 66 2e fe
RSP: 0018:ffffc90002fff6e0 EFLAGS: 00010283
RAX: ffffffff835874db RBX: 000000000000ffff RCX: 0000000000040000
RDX: ffffc90004dcf000 RSI: 00000000000000b5 RDI: 00000000000000b6
RBP: ffffc90002fff8b8 R08: ffffffff83586d16 R09: ffffffff83586584
R10: 0000000000000007 R11: ffff8881599fc780 R12: ffff88811b6a7b7e
R13: 1ffff110236d4f6f R14: ffff88811b6a7ac0 R15: 1ffff110236d4f76
FS: 00007f2e9eb47700(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2e421000 CR3: 000000010e6d4000 CR4: 00000000003526e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
[<ffffffff8471a49f>] netdev_start_xmit include/linux/netdevice.h:4925 [inline]
[<ffffffff8471a49f>] __dev_direct_xmit+0x4ef/0x850 net/core/dev.c:4380
[<ffffffff851d845b>] dev_direct_xmit include/linux/netdevice.h:3043 [inline]
[<ffffffff851d845b>] packet_direct_xmit+0x18b/0x300 net/packet/af_packet.c:284
[<ffffffff851c7472>] packet_snd net/packet/af_packet.c:3112 [inline]
[<ffffffff851c7472>] packet_sendmsg+0x4a22/0x64d0 net/packet/af_packet.c:3143
[<ffffffff8467a4b2>] sock_sendmsg_nosec net/socket.c:716 [inline]
[<ffffffff8467a4b2>] sock_sendmsg net/socket.c:736 [inline]
[<ffffffff8467a4b2>] __sys_sendto+0x472/0x5f0 net/socket.c:2139
[<ffffffff8467a715>] __do_sys_sendto net/socket.c:2151 [inline]
[<ffffffff8467a715>] __se_sys_sendto net/socket.c:2147 [inline]
[<ffffffff8467a715>] __x64_sys_sendto+0xe5/0x100 net/socket.c:2147
[<ffffffff8553071f>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff8553071f>] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80
[<ffffffff85600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 7b8fc0103bb5 ("bonding: add a vlan+srcmac tx hashing option")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Moshe Tal <moshet@nvidia.com>
Cc: Jussi Maki <joamaki@gmail.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230622152304.2137482-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlink: do not hard code device address lenth in fdb dumps

[ Upstream commit aa5406950726e336c5c9585b09799a734b6e77bf ]

syzbot reports that some netdev devices do not have a six bytes
address [1]

Replace ETH_ALEN by dev->addr_len.

[1] (Case of a device where dev->addr_len = 4)

BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in copyout+0xb8/0x100 lib/iov_iter.c:169
instrument_copy_to_user include/linux/instrumented.h:114 [inline]
copyout+0xb8/0x100 lib/iov_iter.c:169
_copy_to_iter+0x6d8/0x1d00 lib/iov_iter.c:536
copy_to_iter include/linux/uio.h:206 [inline]
simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:513
__skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419
skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:527
skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline]
netlink_recvmsg+0x4ae/0x15a0 net/netlink/af_netlink.c:1970
sock_recvmsg_nosec net/socket.c:1019 [inline]
sock_recvmsg net/socket.c:1040 [inline]
____sys_recvmsg+0x283/0x7f0 net/socket.c:2722
___sys_recvmsg+0x223/0x840 net/socket.c:2764
do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858
__sys_recvmmsg net/socket.c:2937 [inline]
__do_sys_recvmmsg net/socket.c:2960 [inline]
__se_sys_recvmmsg net/socket.c:2953 [inline]
__x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Uninit was stored to memory at:
__nla_put lib/nlattr.c:1009 [inline]
nla_put+0x1c6/0x230 lib/nlattr.c:1067
nlmsg_populate_fdb_fill+0x2b8/0x600 net/core/rtnetlink.c:4071
nlmsg_populate_fdb net/core/rtnetlink.c:4418 [inline]
ndo_dflt_fdb_dump+0x616/0x840 net/core/rtnetlink.c:4456
rtnl_fdb_dump+0x14ff/0x1fc0 net/core/rtnetlink.c:4629
netlink_dump+0x9d1/0x1310 net/netlink/af_netlink.c:2268
netlink_recvmsg+0xc5c/0x15a0 net/netlink/af_netlink.c:1995
sock_recvmsg_nosec+0x7a/0x120 net/socket.c:1019
____sys_recvmsg+0x664/0x7f0 net/socket.c:2720
___sys_recvmsg+0x223/0x840 net/socket.c:2764
do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858
__sys_recvmmsg net/socket.c:2937 [inline]
__do_sys_recvmmsg net/socket.c:2960 [inline]
__se_sys_recvmmsg net/socket.c:2953 [inline]
__x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Uninit was created at:
slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:716
slab_alloc_node mm/slub.c:3451 [inline]
__kmem_cache_alloc_node+0x4ff/0x8b0 mm/slub.c:3490
kmalloc_trace+0x51/0x200 mm/slab_common.c:1057
kmalloc include/linux/slab.h:559 [inline]
__hw_addr_create net/core/dev_addr_lists.c:60 [inline]
__hw_addr_add_ex+0x2e5/0x9e0 net/core/dev_addr_lists.c:118
__dev_mc_add net/core/dev_addr_lists.c:867 [inline]
dev_mc_add+0x9a/0x130 net/core/dev_addr_lists.c:885
igmp6_group_added+0x267/0xbc0 net/ipv6/mcast.c:680
ipv6_mc_up+0x296/0x3b0 net/ipv6/mcast.c:2754
ipv6_mc_remap+0x1e/0x30 net/ipv6/mcast.c:2708
addrconf_type_change net/ipv6/addrconf.c:3731 [inline]
addrconf_notify+0x4d3/0x1d90 net/ipv6/addrconf.c:3699
notifier_call_chain kernel/notifier.c:93 [inline]
raw_notifier_call_chain+0xe4/0x430 kernel/notifier.c:461
call_netdevice_notifiers_info net/core/dev.c:1935 [inline]
call_netdevice_notifiers_extack net/core/dev.c:1973 [inline]
call_netdevice_notifiers+0x1ee/0x2d0 net/core/dev.c:1987
bond_enslave+0xccd/0x53f0 drivers/net/bonding/bond_main.c:1906
do_set_master net/core/rtnetlink.c:2626 [inline]
rtnl_newlink_create net/core/rtnetlink.c:3460 [inline]
__rtnl_newlink net/core/rtnetlink.c:3660 [inline]
rtnl_newlink+0x378c/0x40e0 net/core/rtnetlink.c:3673
rtnetlink_rcv_msg+0x16a6/0x1840 net/core/rtnetlink.c:6395
netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6413
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0xf28/0x1230 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x122f/0x13d0 net/netlink/af_netlink.c:1913
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x999/0xd50 net/socket.c:2503
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2557
__sys_sendmsg net/socket.c:2586 [inline]
__do_sys_sendmsg net/socket.c:2595 [inline]
__se_sys_sendmsg net/socket.c:2593 [inline]
__x64_sys_sendmsg+0x304/0x490 net/socket.c:2593
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Bytes 2856-2857 of 3500 are uninitialized
Memory access of size 3500 starts at ffff888018d99104
Data copied to user address 0000000020000480

Fixes: d83b06036048 ("net: add fdb generic dump routine")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230621174720.1845040-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlink: fix potential deadlock in netlink_set_err()

[ Upstream commit 8d61f926d42045961e6b65191c09e3678d86a9cf ]

syzbot reported a possible deadlock in netlink_set_err() [1]

A similar issue was fixed in commit 1d482e666b8e ("netlink: disable IRQs
for netlink_lock_table()") in netlink_lock_table()

This patch adds IRQ safety to netlink_set_err() and __netlink_diag_dump()
which were not covered by cited commit.

[1]

WARNING: possible irq lock inversion dependency detected
6.4.0-rc6-syzkaller-00240-g4e9f0ec38852 #0 Not tainted

syz-executor.2/23011 just changed the state of lock:
ffffffff8e1a7a58 (nl_table_lock){.+.?}-{2:2}, at: netlink_set_err+0x2e/0x3a0 net/netlink/af_netlink.c:1612
but this lock was taken by another, SOFTIRQ-safe lock in the past:
 (&local->queue_stop_reason_lock){..-.}-{2:2}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(nl_table_lock);
                               local_irq_disable();
                               lock(&local->queue_stop_reason_lock);
                               lock(nl_table_lock);
  <Interrupt>
    lock(&local->queue_stop_reason_lock);

 *** DEADLOCK ***

Fixes: 1d482e666b8e ("netlink: disable IRQs for netlink_lock_table()")
Reported-by: syzbot+a7d200a347f912723e5c@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=a7d200a347f912723e5c
Link: https://lore.kernel.org/netdev/000000000000e38d1605fea5747e@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230621154337.1668594-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: fix double serdes powerdown

[ Upstream commit c4fc88ad2a765224a648db8ab35f125e120fe41b ]

Commit 49725ffc15fc ("net: stmmac: power up/down serdes in
stmmac_open/release") correctly added a call to the serdes_powerdown()
callback to stmmac_release() but did not remove the one from
stmmac_remove() which leads to a doubled call to serdes_powerdown().

This can lead to all kinds of problems: in the case of the qcom ethqos
driver, it caused an unbalanced regulator disable splat.

Fixes: 49725ffc15fc ("net: stmmac: power up/down serdes in stmmac_open/release")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Junxiao Chang <junxiao.chang@intel.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230621135537.376649-1-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: kvaser_pciefd: Set hardware timestamp on transmitted packets

[ Upstream commit ec681b91befa982477e24a150dd6452427fe6473 ]

Set hardware timestamp on transmitted packets.

Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: kvaser_pciefd: Add function to set skb hwtstamps

[ Upstream commit 2d55e9f9b4427e1ad59b974f2267767aac3788d3 ]

Add new function, kvaser_pciefd_set_skb_timestamp(), to set skb hwtstamps.

Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20230529134248.752036-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stable-dep-of: ec681b91befa ("can: kvaser_pciefd: Set hardware timestamp on transmitted packets")
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: length: fix bitstuffing count

[ Upstream commit 9fde4c557f78ee2f3626e92b4089ce9d54a2573a ]

The Stuff Bit Count is always coded on 4 bits [1]. Update the Stuff
Bit Count size accordingly.

In addition, the CRC fields of CAN FD Frames contain stuff bits at
fixed positions called fixed stuff bits [2]. The CRC field starts with
a fixed stuff bit and then has another fixed stuff bit after each
fourth bit [2], which allows us to derive this formula:

  FSB count = 1 + round_down(len(CRC field)/4)

The length of the CRC field is [1]:

  len(CRC field) = len(Stuff Bit Count) + len(CRC)
                 = 4 + len(CRC)

with len(CRC) either 17 or 21 bits depending of the payload length.

In conclusion, for CRC17:

  FSB count = 1 + round_down((4 + 17)/4)
            = 6

and for CRC 21:

  FSB count = 1 + round_down((4 + 21)/4)
            = 7

Add a Fixed Stuff bits (FSB) field with above values and update
CANFD_FRAME_OVERHEAD_SFF and CANFD_FRAME_OVERHEAD_EFF accordingly.

[1] ISO 11898-1:2015 section 10.4.2.6 "CRC field":

  The CRC field shall contain the CRC sequence followed by a recessive
  CRC delimiter. For FD Frames, the CRC field shall also contain the
  stuff count.

  Stuff count

  If FD Frames, the stuff count shall be at the beginning of the CRC
  field. It shall consist of the stuff bit count modulo 8 in a 3-bit
  gray code followed by a parity bit [...]

[2] ISO 11898-1:2015 paragraph 10.5 "Frame coding":

  In the CRC field of FD Frames, the stuff bits shall be inserted at
  fixed positions; they are called fixed stuff bits. There shall be a
  fixed stuff bit before the first bit of the stuff count, even if the
  last bits of the preceding field are a sequence of five consecutive
  bits of identical value, there shall be only the fixed stuff bit,
  there shall not be two consecutive stuff bits. A further fixed stuff
  bit shall be inserted after each fourth bit of the CRC field [...]

Fixes: 85d99c3e2a13 ("can: length: can_skb_get_frame_len(): introduce function to get data length of frame in data link layer")
Suggested-by: Thomas Kopp <Thomas.Kopp@microchip.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Thomas Kopp <Thomas.Kopp@microchip.com>
Link: https://lore.kernel.org/all/20230611025728.450837-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings

[ Upstream commit 9a5cb79762e0eda17ca15c2a6eaca4622383c21c ]

When calling bpf_sk_lookup_tcp(), bpf_sk_lookup_udp() or
bpf_skc_lookup_tcp() from tc/xdp ingress, VRF socket bindings aren't
respoected, i.e. unbound sockets are returned, and bound sockets aren't
found.

VRF binding is determined by the sdif argument to sk_lookup(), however
when called from tc the IP SKB control block isn't initialized and thus
inet{,6}_sdif() always returns 0.

Fix by calculating sdif for the tc/xdp flows by observing the device's
l3 enslaved state.

The cg/sk_skb hooking points which are expected to support
inet{,6}_sdif() pass sdif=-1 which makes __bpf_skc_lookup() use the
existing logic.

Fixes: 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF")
Signed-off-by: Gilad Sever <gilad9366@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/bpf/20230621104211.301902-4-gilad9366@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint

[ Upstream commit 97fbfeb86917bdbe9c41d5143e335a929147f405 ]

skb->dev always exists in the tc flow. There is no need to use
bpf_skc_lookup(), bpf_sk_lookup() from this code path.

This change facilitates fixing the tc flow to be VRF aware.

Signed-off-by: Gilad Sever <gilad9366@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230621104211.301902-3-gilad9366@gmail.com
Stable-dep-of: 9a5cb79762e0 ("bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Factor out socket lookup functions for the TC hookpoint.

[ Upstream commit 6e98730bc0b44acaf86eccc75f823128aa9c9e79 ]

Change BPF helper socket lookup functions to use TC specific variants:
bpf_tc_sk_lookup_tcp() / bpf_tc_sk_lookup_udp() / bpf_tc_skc_lookup_tcp()
instead of sharing implementation with the cg / sk_skb hooking points.
This allows introducing a separate logic for the TC flow.

The tc functions are identical to the original code.

Signed-off-by: Gilad Sever <gilad9366@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230621104211.301902-2-gilad9366@gmail.com
Stable-dep-of: 9a5cb79762e0 ("bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath9k: convert msecs to jiffies where needed

[ Upstream commit 2aa083acea9f61be3280184384551178f510ff51 ]

Since 'ieee80211_queue_delayed_work()' expects timeout in
jiffies and not milliseconds, 'msecs_to_jiffies()' should
be used in 'ath_restart_work()' and '__ath9k_flush()'.

Fixes: d63ffc45c5d3 ("ath9k: rename tx_complete_work to hw_check_work")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230613134655.248728-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: indicate HW decrypt for beacon protection

[ Upstream commit 2db72b8a700943aa54dce0aabe6ff1b72b615162 ]

We've already done the 'decryption' here, so tell
mac80211 it need not do it again.

Fixes: b1fdc2505abc ("iwlwifi: mvm: advertise BIGTK client support if available")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230620125813.a50cf68fbf2e.Ieceacbe3789d81ea02ae085ad8d1f8813a33c31b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019

[ Upstream commit c467c8f081859d4f4ca4eee4fba54bb5d85d6c97 ]

This microSD card never clears Flush Cache bit after cache flush has
been started in sd_flush_cache(). This leads e.g. to failure to mount
file system. Add a quirk which disables the SD cache for this specific
card from specific manufacturing date of 11/2019, since on newer dated
cards from 05/2023 the cache flush works correctly.

Fixes: 08ebf903af57 ("mmc: core: Fixup support for writeback-cache for eMMC and SD")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230620102713.7701-1-marex@denx.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ieee80211: Fix the common size calculation for reconfiguration ML

[ Upstream commit ce6e1f600b0cfc563a7d607de702262a58cd835d ]

The common information length is found in the first octet of the common
information.

Fixes: 0f48b8b88aa9 ("wifi: ieee80211: add definitions for multi-link element")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.3c7ed4817338.I42ef706cb827b4dade6e4ffbb6e7f341eaccd398@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211/mac80211: Fix ML element common size calculation

[ Upstream commit 1403b109c9a5244dc6ab79154f04eecc209ef3d2 ]

The common size is part of the length in the data
so don't add it again.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: ce6e1f600b0c ("wifi: ieee80211: Fix the common size calculation for reconfiguration ML")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: fix regulatory disconnect with OCB/NAN

[ Upstream commit e8c2af660ba0790afd14d5cbc2fd05c6dc85e207 ]

Since regulatory disconnect was added, OCB and NAN interface
types were added, which made it completely unusable for any
driver that allowed OCB/NAN. Add OCB/NAN (though NAN doesn't
do anything, we don't have any info) and also remove all the
logic that opts out, so it won't be broken again if/when new
interface types are added.

Fixes: 6e0bd6c35b02 ("cfg80211: 802.11p OCB mode handling")
Fixes: cb3b7d87652a ("cfg80211: add start / stop NAN commands")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230616222844.2794d1625a26.I8e78a3789a29e6149447b3139df724a6f1b46fc3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: drop incorrect nontransmitted BSS update code

[ Upstream commit 39432f8a3752a87a53fd8d5e51824a43aaae5cab ]

The removed code ran for any BSS that was not included in the MBSSID
element in order to update it. However, instead of using the correct
inheritance rules, it would simply copy the elements from the
transmitting AP. The result is that we would report incorrect elements
in this case.

After some discussions, it seems that there are likely not even APs
actually using this feature. Either way, removing the code decreases
complexity and makes the cfg80211 behaviour more correct.

Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.cfd6d8db1f26.Ia1044902b86cd7d366400a4bfb93691b8f05d68c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: rewrite merging of inherited elements

[ Upstream commit dfd9aa3e7a456d57b18021d66472ab7ff8373ab7 ]

The cfg80211_gen_new_ie function merges the IEs using inheritance rules.
Rewrite this function to fix issues around inheritance rules. In
particular, vendor elements do not require any special handling, as they
are either all inherited or overridden by the subprofile.
Also, add fragmentation handling as this may be needed in some cases.

This also changes the function to not require making a copy. The new
version could be optimized a bit by explicitly tracking which IEs have
been handled already rather than looking that up again every time.

Note that a small behavioural change is the removal of the SSID special
handling. This should be fine for the MBSSID element, as the SSID must
be included in the subelement.

Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.bc6152e146db.I2b5f3bc45085e1901e5b5192a674436adaf94748@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: Remove "Missing iftype sband data/EHT cap" spam

[ Upstream commit 6e21e7b8cd897193cee3c2649640efceb3004ba5 ]

In mesh mode, ieee80211_chandef_he_6ghz_oper() is called by
mesh_matches_local() for every received mesh beacon.

On a 6 GHz mesh of a HE-only phy, this spams that the hardware does not
have EHT capabilities, even if the received mesh beacon does not have an
EHT element.

Unlike HE, not supporting EHT in the 6 GHz band is not an error so do
not print anything in this case.

Fixes: 5dca295dd767 ("mac80211: Add initial support for EHT and 320 MHz channels")

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230614132648.28995-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: pcie: fix NULL pointer dereference in iwl_pcie_irq_rx_msix_handler()

[ Upstream commit 1902f1953b8ba100ee8705cb8a6f1a9795550eca ]

rxq can be NULL only when trans_pcie->rxq is NULL and entry->entry
is zero. For the case when entry->entry is not equal to 0, rxq
won't be NULL even if trans_pcie->rxq is NULL. Modify checker to
check for trans_pcie->rxq.

Fixes: abc599efa67b ("iwlwifi: pcie: don't crash when rx queues aren't allocated in interrupt")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.5a5eb3889a4a.I375a1d58f16b48cd2044e7b7caddae512d7c86fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: pull from TXQs with softirqs disabled

[ Upstream commit 96fb6f47db24a712d650b0a9b9074873f273fb0e ]

In mac80211, it's required that we pull from TXQs by calling
ieee80211_tx_dequeue() only with softirqs disabled. However,
in iwl_mvm_queue_state_change() we're often called with them
enabled, e.g. from flush if anything was flushed, triggering
a mac80211 warning.

Fix that by disabling the softirqs across the TX call.

Fixes: cfbc6c4c5b91 ("iwlwifi: mvm: support mac80211 TXQs model")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614123446.0feef7fa81db.I4dd62542d955b40dd8f0af34fa4accb9d0d17c7e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath11k: Add missing check for ioremap

[ Upstream commit 16e0077e14a73866e9b0f4a6bf4ad3d4a5cb0f2a ]

Add check for ioremap() and return the error if it fails in order to
guarantee the success of ioremap(), same as in
ath11k_qmi_load_file_target_mem().

Fixes: 6ac04bdc5edb ("ath11k: Use reserved host DDR addresses from DT for PCI devices")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230608022858.27405-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtnetlink: extend RTEXT_FILTER_SKIP_STATS to IFLA_VF_INFO

[ Upstream commit fa0e21fa44438a0e856d42224bfa24641d37b979 ]

This filter already exists for excluding IPv6 SNMP stats. Extend its
definition to also exclude IFLA_VF_INFO stats in RTM_GETLINK.

This patch constitutes a partial fix for a netlink attribute nesting
overflow bug in IFLA_VFINFO_LIST. By excluding the stats when the
requester doesn't need them, the truncation of the VF list is avoided.

While it was technically only the stats added in commit c5a9f6f0ab40
("net/core: Add drop counters to VF statistics") breaking the camel's
back, the appreciable size of the stats data should never have been
included without due consideration for the maximum number of VFs
supported by PCI.

Fixes: 3b766cd83232 ("net/core: Add reading VF statistics through the PF netdevice")
Fixes: c5a9f6f0ab40 ("net/core: Add drop counters to VF statistics")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Cc: Edwin Peer <espeer@gmail.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/r/20230611105108.122586-1-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: Fix permissions for valid_links debugfs entry

[ Upstream commit 4cacadc0dbd8013e6161aa8843d8e9d8ad435b47 ]

The entry should be a read only one and not a write only one. Fix it.

Fixes: 3d9011029227 ("wifi: mac80211: implement link switching")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230611121219.c75316990411.I1565a7fcba8a37f83efffb0cc6b71c572b896e94@changeid
[remove x16 change since it doesn't work yet]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath9k: Fix possible stall on ath9k_txq_list_has_key()

[ Upstream commit 75086cc6dee046e3fbb3dba148b376d8802f83bc ]

On EDMA capable hardware, ath9k_txq_list_has_key() can enter infinite
loop if it is called while all txq_fifos have packets that use different
key that the one we are looking for. Fix it by exiting the loop if all
txq_fifos have been checked already.

Because this loop is called under spin_lock_bh() (see ath_txq_lock) it
causes the following rcu stall:

rcu: INFO: rcu_sched self-detected stall on CPU
ath10k_pci 0000:01:00.0: failed to read temperature -11
rcu:    1-....: (5254 ticks this GP) idle=189/1/0x4000000000000002 softirq=8442983/8442984 fqs=2579
        (t=5257 jiffies g=17983297 q=334)
Task dump for CPU 1:
task:hostapd         state:R  running task     stack:    0 pid:  297 ppid:   289 flags:0x0000000a
Call trace:
 dump_backtrace+0x0/0x170
 show_stack+0x1c/0x24
 sched_show_task+0x140/0x170
 dump_cpu_task+0x48/0x54
 rcu_dump_cpu_stacks+0xf0/0x134
 rcu_sched_clock_irq+0x8d8/0x9fc
 update_process_times+0xa0/0xec
 tick_sched_timer+0x5c/0xd0
 __hrtimer_run_queues+0x154/0x320
 hrtimer_interrupt+0x120/0x2f0
 arch_timer_handler_virt+0x38/0x44
 handle_percpu_devid_irq+0x9c/0x1e0
 handle_domain_irq+0x64/0x90
 gic_handle_irq+0x78/0xb0
 call_on_irq_stack+0x28/0x38
 do_interrupt_handler+0x54/0x5c
 el1_interrupt+0x2c/0x4c
 el1h_64_irq_handler+0x14/0x1c
 el1h_64_irq+0x74/0x78
 ath9k_txq_has_key+0x1bc/0x250 [ath9k]
 ath9k_set_key+0x1cc/0x3dc [ath9k]
 drv_set_key+0x78/0x170
 ieee80211_key_replace+0x564/0x6cc
 ieee80211_key_link+0x174/0x220
 ieee80211_add_key+0x11c/0x300
 nl80211_new_key+0x12c/0x330
 genl_family_rcv_msg_doit+0xbc/0x11c
 genl_rcv_msg+0xd8/0x1c4
 netlink_rcv_skb+0x40/0x100
 genl_rcv+0x3c/0x50
 netlink_unicast+0x1ec/0x2c0
 netlink_sendmsg+0x198/0x3c0
 ____sys_sendmsg+0x210/0x250
 ___sys_sendmsg+0x78/0xc4
 __sys_sendmsg+0x4c/0x90
 __arm64_sys_sendmsg+0x28/0x30
 invoke_syscall.constprop.0+0x60/0x100
 do_el0_svc+0x48/0xd0
 el0_svc+0x14/0x50
 el0t_64_sync_handler+0xa8/0xb0
 el0t_64_sync+0x158/0x15c

This rcu stall is hard to reproduce as is, but changing ATH_TXFIFO_DEPTH
from 8 to 2 makes it reasonably easy to reproduce.

Fixes: ca2848022c12 ("ath9k: Postpone key cache entry deletion for TXQ frames reference it")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609093744.1985-1-repk@triplefau.lt
Signed-off-by: Sasha Levin <sashal@kernel.org>

memstick r592: make memstick_debug_get_tpc_name() static

[ Upstream commit 434587df9f7fd68575f99a889cc5f2efc2eaee5e ]

There are no other files referencing this function, apparently
it was left global to avoid an 'unused function' warning when
the only caller is left out. With a 'W=1' build, it causes
a 'missing prototype' warning though:

drivers/memstick/host/r592.c:47:13: error: no previous prototype for 'memstick_debug_get_tpc_name' [-Werror=missing-prototypes]

Annotate the function as 'static __maybe_unused' to avoid both
problems.

Fixes: 926341250102 ("memstick: add driver for Ricoh R5C592 card reader")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516202714.560929-1-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: mediatek: Avoid ugly error message when SDIO wakeup IRQ isn't used

[ Upstream commit a3332b7aad346b14770797e03ddd02ebdb14db41 ]

When I boot a kukui-kodama board, I see an ugly warning in my kernel
log:
  mtk-msdc 11240000.mmc: error -ENXIO: IRQ sdio_wakeup not found

It's pretty normal not to have an "sdio_wakeup" IRQ defined. In fact,
no device trees in mainline seem to have it. Let's use the
platform_get_irq_byname_optional() to avoid the error message.

Fixes: 527f36f5efa4 ("mmc: mediatek: add support for SDIO eint wakup IRQ")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230510064434.1.I935404c5396e6bf952e99bb7ffb744c6f7fd430b@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kexec: fix a memory leak in crash_shrink_memory()

[ Upstream commit 1cba6c4309f03de570202c46f03df3f73a0d4c82 ]

Patch series "kexec: enable kexec_crash_size to support two crash kernel
regions".

When crashkernel=X fails to reserve region under 4G, it will fall back to
reserve region above 4G and a region of the default size will also be
reserved under 4G.  Unfortunately, /sys/kernel/kexec_crash_size only
supports one crash kernel region now, the user cannot sense the low memory
reserved by reading /sys/kernel/kexec_crash_size.  Also, low memory cannot
be freed by writing this file.

For example:
resource_size(crashk_res) = 512M
resource_size(crashk_low_res) = 256M

The result of 'cat /sys/kernel/kexec_crash_size' is 512M, but it should be
768M.  When we execute 'echo 0 > /sys/kernel/kexec_crash_size', the size
of crashk_res becomes 0 and resource_size(crashk_low_res) is still 256 MB,
which is incorrect.

Since crashk_res manages the memory with high address and crashk_low_res
manages the memory with low address, crashk_low_res is shrunken only when
all crashk_res is shrunken.  And because when there is only one crash
kernel region, crashk_res is always used.  Therefore, if all crashk_res is
shrunken and crashk_low_res still exists, swap them.

This patch (of 6):

If the value of parameter 'new_size' is in the semi-open and semi-closed
interval (crashk_res.end - KEXEC_CRASH_MEM_ALIGN + 1, crashk_res.end], the
calculation result of ram_res is:

ram_res->start = crashk_res.end + 1
ram_res->end   = crashk_res.end

The operation of insert_resource() fails, and ram_res is not added to
iomem_resource.  As a result, the memory of the control block ram_res is
leaked.

In fact, on all architectures, the start address and size of crashk_res
are already aligned by KEXEC_CRASH_MEM_ALIGN.  Therefore, we do not need
to round up crashk_res.start again.  Instead, we should round up
'new_size' in advance.

Link: https://lkml.kernel.org/r/20230527123439.772-1-thunder.leizhen@huawei.com
Link: https://lkml.kernel.org/r/20230527123439.772-2-thunder.leizhen@huawei.com
Fixes: 6480e5a09237 ("kdump: add missing RAM resource in crash_shrink_memory()")
Fixes: 06a7f711246b ("kexec: premit reduction of the reserved memory size")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Cong Wang <amwang@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog/perf: more properly prevent false positives with turbo modes

[ Upstream commit 4379e59fe5665cfda737e45b8bf2f05321ef049c ]

Currently, in the watchdog_overflow_callback() we first check to see if
the watchdog had been touched and _then_ we handle the workaround for
turbo mode.  This order should be reversed.

Specifically, "touching" the hardlockup detector's watchdog should avoid
lockups being detected for one period that should be roughly the same
regardless of whether we're running turbo or not.  That means that we
should do the extra accounting for turbo _before_ we look at (and clear)
the global indicating that we've been touched.

NOTE: this fix is made based on code inspection.  I am not aware of any
reports where the old code would have generated false positives.  That
being said, this order seems more correct and also makes it easier down
the line to share code with the "buddy" hardlockup detector.

Link: https://lkml.kernel.org/r/20230519101840.v5.2.I843b0d1de3e096ba111a179f3adb16d576bef5c7@changeid
Fixes: 7edaeb6841df ("kernel/watchdog: Prevent false positives with turbo modes")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Colin Cross <ccross@android.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog/perf: define dummy watchdog_update_hrtimer_threshold() on correct config

[ Upstream commit 5e008df11c55228a86a1bae692cc2002503572c9 ]

Patch series "watchdog/hardlockup: Add the buddy hardlockup detector", v5.

This patch series adds the "buddy" hardlockup detector.  In brief, the
buddy hardlockup detector can detect hardlockups without arch-level
support by having CPUs checkup on a "buddy" CPU periodically.

Given the new design of this patch series, testing all combinations is
fairly difficult. I've attempted to make sure that all combinations of
CONFIG_ options are good, but it wouldn't surprise me if I missed
something. I apologize in advance and I'll do my best to fix any
problems that are found.

This patch (of 18):

The real watchdog_update_hrtimer_threshold() is defined in
kernel/watchdog_hld.c.  That file is included if
CONFIG_HARDLOCKUP_DETECTOR_PERF and the function is defined in that file
if CONFIG_HARDLOCKUP_CHECK_TIMESTAMP.

The dummy version of the function in "nmi.h" didn't get that quite right.
While this doesn't appear to be a huge deal, it's nice to make it
consistent.

It doesn't break builds because CHECK_TIMESTAMP is only defined by x86 so
others don't get a double definition, and x86 uses perf lockup detector,
so it gets the out of line version.

Link: https://lkml.kernel.org/r/20230519101840.v5.18.Ia44852044cdcb074f387e80df6b45e892965d4a1@changeid
Link: https://lkml.kernel.org/r/20230519101840.v5.1.I8cbb2f4fa740528fcfade4f5439b6cdcdd059251@changeid
Fixes: 7edaeb6841df ("kernel/watchdog: Prevent false positives with turbo modes")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Cc: Colin Cross <ccross@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: cgroup: fix unexpected failure on test_memcg_low

[ Upstream commit 19ab365762c6cc39dfdee9e13ab0d12fe4b5540d ]

Since commit f079a020ba95 ("selftests: memcg: factor out common parts of
memory.{low,min} tests"), the value used in second alloc_anon has changed
from 148M to 170M.  Because memory.low allows reclaiming page cache in
child cgroups, so the memory.current is close to 30M instead of 50M.
Therefore, adjust the expected value of parent cgroup.

Link: https://lkml.kernel.org/r/20230522095233.4246-2-haifeng.xu@shopee.com
Fixes: f079a020ba95 ("selftests: memcg: factor out common parts of memory.{low,min} tests")
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: handle extts in the miscellaneous interrupt thread

[ Upstream commit 6e8b2c88fc8cf95ed09de25946b20b7536c88cd5 ]

The ice_ptp_extts_work() and ice_ptp_periodic_work() functions are both
scheduled on the same kthread worker, pf.ptp.kworker. The
ice_ptp_periodic_work() function sends to the firmware to interact with the
PHY, and must block to wait for responses.

This can cause delay in responding to the PFINT_OICR_TSYN_EVNT interrupt
cause, ultimately resulting in disruption to processing an input signal of
the frequency is high enough. In our testing, even 100 Hz signals get
disrupted.

Fix this by instead processing the signal inside the miscellaneous
interrupt thread prior to handling Tx timestamps.

Use atomic bits in a new pf->misc_thread bitmap in order to safely
communicate which tasks require processing within the
ice_misc_intr_thread_fn(). This ensures the communication of desired tasks
from the ice_misc_intr() are correctly processed without racing even in the
event that the interrupt triggers again before the thread function exits.

Fixes: 172db5f91d5f ("ice: add support for auxiliary input/output pins")
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rsi: Do not set MMC_PM_KEEP_POWER in shutdown

[ Upstream commit e74f562328b03fbe9cf438f958464dff3a644dfc ]

It makes no sense to set MMC_PM_KEEP_POWER in shutdown. The flag
indicates to the MMC subsystem to keep the slot powered on during
suspend, but in shutdown the slot should actually be powered off.
Drop this call.

Fixes: 063848c3e155 ("rsi: sdio: Add WOWLAN support for S5 shutdown state")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230527222859.273768-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rsi: Do not configure WoWlan in shutdown hook if not enabled

[ Upstream commit b241e260820b68c09586e8a0ae0fc23c0e3215bd ]

In case WoWlan was never configured during the operation of the system,
the hw->wiphy->wowlan_config will be NULL. rsi_config_wowlan() checks
whether wowlan_config is non-NULL and if it is not, then WARNs about it.
The warning is valid, as during normal operation the rsi_config_wowlan()
should only ever be called with non-NULL wowlan_config. In shutdown this
rsi_config_wowlan() should only ever be called if WoWlan was configured
before by the user.

Add checks for non-NULL wowlan_config into the shutdown hook. While at it,
check whether the wiphy is also non-NULL before accessing wowlan_config .
Drop the single-use wowlan_config variable, just inline it into function
call.

Fixes: 16bbc3eb8372 ("rsi: fix null pointer dereference during rsi_shutdown()")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230527222833.273741-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix check_mtu using wrong variable type

[ Upstream commit 095641817e1bf6aa2560e025e47575188ee3edaf ]

Dan Carpenter found via Smatch static checker, that unsigned 'mtu_lo' is
never less than zero.

Variable mtu_lo should have been an 'int', because read_mtu_device_lo()
uses minus as error indications.

Fixes: b62eba563229 ("selftests/bpf: Tests using bpf_check_mtu BPF-helper")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/bpf/168605104733.3636467.17945947801753092590.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: recalc min chandef for new STA links

[ Upstream commit ba7af2654e3b7b810c750b3c6106f6f20b81cc88 ]

When adding a new link to a station, this needs to cause a
recalculation of the minimum chandef since otherwise we can
have a higher bandwidth station connected on that link than
the link is operating at. Do the appropriate recalc.

Fixes: cb71f1d136a6 ("wifi: mac80211: add sta link addition/removal")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.377adf3c789a.I91bf28f399e16e6ac1f83bacd1029a698b4e6685@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath10k: Trigger STA disconnect after reconfig complete on hardware restart

[ Upstream commit 75bd32f5ce94bc365ba0b9b68bcf9de84a391d37 ]

Currently, on WCN3990, the station disconnect after hardware recovery is
not working as expected. This is because of setting the
IEEE80211_SDATA_DISCONNECT_HW_RESTART flag very early in the hardware
recovery process even before the driver invokes ieee80211_hw_restart().
On the contrary, mac80211 expects this flag to be set after
ieee80211_hw_restart() is invoked for it to trigger station disconnect.

Set the IEEE80211_SDATA_DISCONNECT_HW_RESTART flag in
ath10k_reconfig_complete() instead to fix this.

The other targets are not affected by this change, since the hardware
params flag is not set.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1

Fixes: 2c3fc50591ff ("ath10k: Trigger sta disconnect on hardware restart")
Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230518101515.3820-1-quic_youghand@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: xdp1 and xdp2 reduce XDPBUFSIZE to 60

[ Upstream commit 60548b825b082cedf89b275c21c28b1e1d030e50 ]

Default samples/pktgen scripts send 60 byte packets as hardware adds
4-bytes FCS checksum, which fulfils minimum Ethernet 64 bytes frame
size.

XDP layer will not necessary have access to the 4-bytes FCS checksum.

This leads to bpf_xdp_load_bytes() failing as it tries to copy 64-bytes
from an XDP packet that only have 60-bytes available.

Fixes: 772251742262 ("samples/bpf: fixup some tools to be able to support xdp multibuffer")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/bpf/168545704139.2996228.2516528552939485216.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath9k: don't allow to overwrite ENDPOINT0 attributes

[ Upstream commit 061b0cb9327b80d7a0f63a33e7c3e2a91a71f142 ]

A bad USB device is able to construct a service connection response
message with target endpoint being ENDPOINT0 which is reserved for
HTC_CTRL_RSVD_SVC and should not be modified to be used for any other
services.

Reject such service connection responses.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Reported-by: syzbot+b68fbebe56d8362907e8@syzkaller.appspotmail.com
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230516150427.79469-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ray_cs: Fix an error handling path in ray_probe()

[ Upstream commit 4f8d66a9fb2edcd05c1e563456a55a08910bfb37 ]

Should ray_config() fail, some resources need to be released as already
done in the remove function.

While at it, remove a useless and erroneous comment. The probe is
ray_probe(), not ray_attach().

Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/8c544d18084f8b37dd108e844f7e79e85ff708ff.1684570373.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: wl3501_cs: Fix an error handling path in wl3501_probe()

[ Upstream commit 391af06a02e7642039ac5f6c4b2c034ab0992b5d ]

Should wl3501_config() fail, some resources need to be released as already
done in the remove function.

Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/7cc9c9316489b7d69b36aeb0edd3123538500b41.1684569865.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: atmel: Fix an error handling path in atmel_probe()

[ Upstream commit 6b92e4351a29af52c285fe235e6e4d1a75de04b2 ]

Should atmel_config() fail, some resources need to be released as already
done in the remove function.

While at it, remove a useless and erroneous comment. The probe is
atmel_probe(), not atmel_attach().

Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1e65f174607a83348034197fa7d603bab10ba4a9.1684569156.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: orinoco: Fix an error handling path in orinoco_cs_probe()

[ Upstream commit 67a81d911c01225f426cc6bee2373df044c1a9b7 ]

Should orinoco_cs_config() fail, some resources need to be released as
already done in the remove function.

While at it, remove a useless and erroneous comment. The probe is
orinoco_cs_probe(), not orinoco_cs_attach().

Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/e24735ce4d82901d5f7ea08419eea53bfdde3d65.1684568286.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: orinoco: Fix an error handling path in spectrum_cs_probe()

[ Upstream commit 925244325159824385209e3e0e3f91fa6bf0646c ]

Should spectrum_cs_config() fail, some resources need to be released as
already done in the remove function.

While at it, remove a useless and erroneous comment. The probe is
spectrum_cs_probe(), not spectrum_cs_attach().

Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/c0bc0c21c58ca477fc5521607615bafbf2aef8eb.1684567733.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: Streamline debugfs operations

[ Upstream commit 08880713ceec023dd94d634f1e8902728c385939 ]

If CONFIG_DEBUG_FS is not set:

    regulator: Failed to create debugfs directory
    ...
    regulator-dummy: Failed to create debugfs directory

As per the comments for debugfs_create_dir(), errors returned by this
function should be expected, and ignored:

 * If debugfs is not enabled in the kernel, the value -%ENODEV will be
 * returned.
 *
 * NOTE: it's expected that most callers should _ignore_ the errors returned
 * by this function. Other debugfs functions handle the fact that the "dentry"
 * passed to them could be an error and they don't crash in that case.
 * Drivers should generally work fine even if debugfs fails to init anyway.

Adhere to the debugfs spirit, and streamline all operations by:
  1. Demoting the importance of the printed error messages to debug
     level, like is already done in create_regulator(),
  2. Further ignoring any returned errors, as by design, all debugfs
     functions are no-ops when passed an error pointer.

Fixes: 2bf1c45be3b8f3a3 ("regulator: Fix error checking for debugfs_create_dir")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2f8bb6e113359ddfab7b59e4d4274bd4c06d6d0a.1685013051.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: Fix more error checking for debugfs_create_dir()

[ Upstream commit 2715bb11cfff964aa33946847f9527cfbd4874f5 ]

In case of failure, debugfs_create_dir() does not return NULL, but an
error pointer.  Most incorrect error checks were fixed, but the one in
create_regulator() was forgotten.

Fix the remaining error check.

Fixes: 2bf1c45be3b8f3a3 ("regulator: Fix error checking for debugfs_create_dir")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ee980a108b5854dd8ce3630f8f673e784e057d17.1685013051.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Do not use sign-file as testcase

[ Upstream commit f04a32b2c5b539e3c097cb5c7c1df12a8f4a0cf0 ]

The sign-file utility (from scripts/) is used in prog_tests/verify_pkcs7_sig.c,
but the utility should not be called as a test. Executing this utility produces
the following error:

  selftests: /linux/tools/testing/selftests/bpf: urandom_read
  ok 16 selftests: /linux/tools/testing/selftests/bpf: urandom_read

  selftests: /linux/tools/testing/selftests/bpf: sign-file
  not ok 17 selftests: /linux/tools/testing/selftests/bpf: sign-file # exit=2

Also, urandom_read is mistakenly used as a test. It does not lead to an error,
but should be moved over to TEST_GEN_FILES as well. The empty TEST_CUSTOM_PROGS
can then be removed.

Fixes: fc97590668ae ("selftests/bpf: Add test for bpf_verify_pkcs7_signature() kfunc")
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/ZEuWFk3QyML9y5QQ@example.org
Link: https://lore.kernel.org/bpf/88e3ab23029d726a2703adcf6af8356f7a2d3483.1684316821.git.legion@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix memleak due to fentry attach failure

[ Upstream commit 108598c39eefbedc9882273ac0df96127a629220 ]

If it fails to attach fentry, the allocated bpf trampoline image will be
left in the system. That can be verified by checking /proc/kallsyms.

This meamleak can be verified by a simple bpf program as follows:

  SEC("fentry/trap_init")
  int fentry_run()
  {
      return 0;
  }

It will fail to attach trap_init because this function is freed after
kernel init, and then we can find the trampoline image is left in the
system by checking /proc/kallsyms.

  $ tail /proc/kallsyms
  ffffffffc0613000 t bpf_trampoline_6442453466_1  [bpf]
  ffffffffc06c3000 t bpf_trampoline_6442453466_1  [bpf]

  $ bpftool btf dump file /sys/kernel/btf/vmlinux | grep "FUNC 'trap_init'"
  [2522] FUNC 'trap_init' type_id=119 linkage=static

  $ echo $((6442453466 & 0x7fffffff))
  2522

Note that there are two left bpf trampoline images, that is because the
libbpf will fallback to raw tracepoint if -EINVAL is returned.

Fixes: e21aa341785c ("bpf: Fix fexit trampoline.")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Link: https://lore.kernel.org/bpf/20230515130849.57502-2-laoar.shao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Remove bpf trampoline selector

[ Upstream commit 47e79cbeea4b3891ad476047f4c68543eb51c8e0 ]

After commit e21aa341785c ("bpf: Fix fexit trampoline."), the selector is only
used to indicate how many times the bpf trampoline image are updated and been
displayed in the trampoline ksym name. After the trampoline is freed, the
selector will start from 0 again. So the selector is a useless value to the
user. We can remove it.

If the user want to check whether the bpf trampoline image has been updated
or not, the user can compare the address. Each time the trampoline image is
updated, the address will change consequently. Jiri also pointed out another
issue that perf is still using the old name "bpf_trampoline_%lu", so this
change can fix the issue in perf.

Fixes: e21aa341785c ("bpf: Fix fexit trampoline.")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Link: https://lore.kernel.org/bpf/ZFvOOlrmHiY9AgXE@krava
Link: https://lore.kernel.org/bpf/20230515130849.57502-3-laoar.shao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: JIT limited misreported as negative value on aarch64

[ Upstream commit 04cb8453a91c7c22f60ddadb6cef0d19abb33bb5 ]

On aarch64, "bpftool feature" reports an incorrect BPF JIT limit:

$ sudo /sbin/bpftool feature
Scanning system configuration...
bpf() syscall restricted to privileged users
JIT compiler is enabled
JIT compiler hardening is disabled
JIT compiler kallsyms exports are enabled for root
skipping kernel config, can't open file: No such file or directory
Global memory limit for JIT compiler for unprivileged users is -201326592 bytes

This is because /proc/sys/net/core/bpf_jit_limit reports

$ sudo cat /proc/sys/net/core/bpf_jit_limit
68169519595520

...and an int is assumed in read_procfs().  Change read_procfs()
to return a long to avoid negative value reporting.

Fixes: 7a4522bbef0c ("tools: bpftool: add probes for /proc/ eBPF parameters")
Reported-by: Nicky Veitch <nicky.veitch@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230512113134.58996-1-alan.maguire@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: llcp: fix possible use of uninitialized variable in nfc_llcp_send_connect()

[ Upstream commit 0d9b41daa5907756a31772d8af8ac5ff25cf17c1 ]

If sock->service_name is NULL, the local variable
service_name_tlv_length will not be assigned by nfc_llcp_build_tlv(),
later leading to using value frmo the stack.  Smatch warning:

  net/nfc/llcp_commands.c:442 nfc_llcp_send_connect() error: uninitialized symbol 'service_name_tlv_length'.

Fixes: de9e5aeb4f40 ("NFC: llcp: Fix usage of llcp_add_tlv()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: dw: Round of n_bytes to power of 2

[ Upstream commit 9f34baf67e4d08908fd94ff29c825bb673295336 ]

n_bytes variable in the driver represents the number of bytes per word
that needs to be sent/copied to fifo. Bits/word can be between 8 and 32
bits from the client but in memory they are a power of 2, same is mentioned
in spi.h header:
"
 * @bits_per_word: Data transfers involve one or more words; word sizes
 *      like eight or 12 bits are common.  In-memory wordsizes are
 *      powers of two bytes (e.g. 20 bit samples use 32 bits).
 *      This may be changed by the device's driver, or left at the
 *      default (0) indicating protocol words are eight bit bytes.
 *      The spi_transfer.bits_per_word can override this for each transfer.
"

Hence, round of n_bytes to a power of 2 to avoid values like 3 which
would generate unalligned/odd accesses to memory/fifo.

* tested on Baikal-T1 based system with DW SPI-looped back interface
transferring a chunk of data with DFS:8,12,16.

Fixes: a51acc2400d4 ("spi: dw: Add support for 32-bits max xfer size")
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com
Signed-off-by: Joy Chakraborty <joychakr@google.com
Reviewed-by: Serge Semin <fancer.lancer@gmail.com
Tested-by: Serge Semin <fancer.lancer@gmail.com
Link: https://lore.kernel.org/r/20230512104746.1797865-4-joychakr@google.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Don't EFAULT for {g,s}setsockopt with wrong optlen

[ Upstream commit 29ebbba7d46136cba324264e513a1e964ca16c0a ]

With the way the hooks implemented right now, we have a special
condition: optval larger than PAGE_SIZE will expose only first 4k into
BPF; any modifications to the optval are ignored. If the BPF program
doesn't handle this condition by resetting optlen to 0,
the userspace will get EFAULT.

The intention of the EFAULT was to make it apparent to the
developers that the program is doing something wrong.
However, this inadvertently might affect production workloads
with the BPF programs that are not too careful (i.e., returning EFAULT
for perfectly valid setsockopt/getsockopt calls).

Let's try to minimize the chance of BPF program screwing up userspace
by ignoring the output of those BPF programs (instead of returning
EFAULT to the userspace). pr_info_once those cases to
the dmesg to help with figuring out what's going wrong.

Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230511170456.1759459-2-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: fix offsetof() and container_of() to work with CO-RE

[ Upstream commit bdeeed3498c7871c17465bb4f11d1bc67f9098af ]

It seems like __builtin_offset() doesn't preserve CO-RE field
relocations properly. So if offsetof() macro is defined through
__builtin_offset(), CO-RE-enabled BPF code using container_of() will be
subtly and silently broken.

To avoid this problem, redefine offsetof() and container_of() in the
form that works with CO-RE relocations more reliably.

Fixes: 5fbc220862fc ("tools/libpf: Add offsetof/container_of macro in bpf_helpers.h")
Reported-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230509065502.2306180-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: add bpf_bypass_getsockopt proto callback

[ Upstream commit 2598619e012cee5273a2821441b9a051ad931249 ]

Implement ->bpf_bypass_getsockopt proto callback and filter out
SCTP_SOCKOPT_PEELOFF, SCTP_SOCKOPT_PEELOFF_FLAGS and SCTP_SOCKOPT_CONNECTX3
socket options from running eBPF hook on them.

SCTP_SOCKOPT_PEELOFF and SCTP_SOCKOPT_PEELOFF_FLAGS options do fd_install(),
and if BPF_CGROUP_RUN_PROG_GETSOCKOPT hook returns an error after success of
the original handler sctp_getsockopt(...), userspace will receive an error
from getsockopt syscall and will be not aware that fd was successfully
installed into a fdtable.

As pointed by Marcelo Ricardo Leitner it seems reasonable to skip
bpf getsockopt hook for SCTP_SOCKOPT_CONNECTX3 sockopt too.
Because internaly, it triggers connect() and if error is masked
then userspace will be confused.

This patch was born as a result of discussion around a new SCM_PIDFD interface:
https://lore.kernel.org/all/20230413133355.350571-3-aleksandr.mikhalitsyn@canonical.com/

Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: linux-sctp@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Suggested-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mwifiex: Fix the size of a memory allocation in mwifiex_ret_802_11_scan()

[ Upstream commit d9aef04fcfa81ee4fb2804a21a3712b7bbd936af ]

The type of "mwifiex_adapter->nd_info" is "struct cfg80211_wowlan_nd_info",
not "struct cfg80211_wowlan_nd_match".

Use struct_size() to ease the computation of the needed size.

The current code over-allocates some memory, so is safe.
But it wastes 32 bytes.

Fixes: 7d7f07d8c5d3 ("mwifiex: add wowlan net-detect support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/7a6074fb056d2181e058a3cc6048d8155c20aec7.1683371982.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: wilc1000: fix for absent RSN capabilities WFA testcase

[ Upstream commit 9ce4bb09123e9754996e358bd808d39f5d112899 ]

Mandatory WFA testcase
CT_Security_WPA2Personal_STA_RSNEBoundsVerification-AbsentRSNCap,
performs bounds verfication on Beacon and/or Probe response frames. It
failed and observed the reason to be absence of cipher suite and AKM
suite in RSN information. To fix this, enable the RSN flag before extracting RSN
capabilities.

Fixes: cd21d99e595e ("wifi: wilc1000: validate pairwise and authentication suite offsets")
Signed-off-by: Amisha Patel <amisha.patel@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230421181005.4865-1-amisha.patel@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-geni-qcom: Correct CS_TOGGLE bit in SPI_TRANS_CFG

[ Upstream commit 5fd7c99ecf45c8ee8a9b1268f0ffc91cc6271da2 ]

The CS_TOGGLE bit when set is supposed to instruct FW to
toggle CS line between words. The driver with intent of
disabling this behaviour has been unsetting BIT(0). This has
not caused any trouble so far because the original BIT(1)
is untouched and BIT(0) likely wasn't being used.

Correct this to prevent a potential future bug.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org
Fixes: 561de45f72bd ("spi: spi-geni-qcom: Add SPI driver support for GENI based QUP")
Reviewed-by: Douglas Anderson <dianders@chromium.org
Link: https://lore.kernel.org/r/1682412128-1913-1-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: Fix buffer overflow in tcp_basertt

[ Upstream commit f4dea9689c5fea3d07170c2cb0703e216f1a0922 ]

Using sizeof(nv) or strlen(nv)+1 is correct.

Fixes: c890063e4404 ("bpf: sample BPF_SOCKET_OPS_BASE_RTT program")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Link: https://lore.kernel.org/r/1683276658-2860-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: btf_dump_type_data_check_overflow needs to consider BTF_MEMBER_BITFIELD_SIZE

[ Upstream commit c39028b333f3a3a765c5c0b9726b8e38aedf0ba1 ]

The btf_dump/struct_data selftest is failing with:

  [...]
  test_btf_dump_struct_data:FAIL:unexpected return value dumping fs_context unexpected unexpected return value dumping fs_context: actual -7 != expected 264
  [...]

The reason is in btf_dump_type_data_check_overflow(). It does not use
BTF_MEMBER_BITFIELD_SIZE from the struct's member (btf_member). Instead,
it is using the enum size which is 4. It had been working till the recent
commit 4e04143c869c ("fs_context: drop the unused lsm_flags member")
removed an integer member which also removed the 4 bytes padding at the
end of the fs_context. Missing this 4 bytes padding exposed this bug. In
particular, when btf_dump_type_data_check_overflow() reaches the member
'phase', -E2BIG is returned.

The fix is to pass bit_sz to btf_dump_type_data_check_overflow(). In
btf_dump_type_data_check_overflow(), it does a different size check when
bit_sz is not zero.

The current fs_context:

[3600] ENUM 'fs_context_purpose' encoding=UNSIGNED size=4 vlen=3
'FS_CONTEXT_FOR_MOUNT' val=0
'FS_CONTEXT_FOR_SUBMOUNT' val=1
'FS_CONTEXT_FOR_RECONFIGURE' val=2
[3601] ENUM 'fs_context_phase' encoding=UNSIGNED size=4 vlen=7
'FS_CONTEXT_CREATE_PARAMS' val=0
'FS_CONTEXT_CREATING' val=1
'FS_CONTEXT_AWAITING_MOUNT' val=2
'FS_CONTEXT_AWAITING_RECONF' val=3
'FS_CONTEXT_RECONF_PARAMS' val=4
'FS_CONTEXT_RECONFIGURING' val=5
'FS_CONTEXT_FAILED' val=6
[3602] STRUCT 'fs_context' size=264 vlen=21
'ops' type_id=3603 bits_offset=0
'uapi_mutex' type_id=235 bits_offset=64
'fs_type' type_id=872 bits_offset=1216
'fs_private' type_id=21 bits_offset=1280
'sget_key' type_id=21 bits_offset=1344
'root' type_id=781 bits_offset=1408
'user_ns' type_id=251 bits_offset=1472
'net_ns' type_id=984 bits_offset=1536
'cred' type_id=1785 bits_offset=1600
'log' type_id=3621 bits_offset=1664
'source' type_id=42 bits_offset=1792
'security' type_id=21 bits_offset=1856
's_fs_info' type_id=21 bits_offset=1920
'sb_flags' type_id=20 bits_offset=1984
'sb_flags_mask' type_id=20 bits_offset=2016
's_iflags' type_id=20 bits_offset=2048
'purpose' type_id=3600 bits_offset=2080 bitfield_size=8
'phase' type_id=3601 bits_offset=2088 bitfield_size=8
'need_free' type_id=67 bits_offset=2096 bitfield_size=1
'global' type_id=67 bits_offset=2097 bitfield_size=1
'oldapi' type_id=67 bits_offset=2098 bitfield_size=1

Fixes: 920d16af9b42 ("libbpf: BTF dumper support for typed data")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230428013638.1581263-1-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>