Simon Glass [Wed, 1 Dec 2021 16:03:03 +0000 (09:03 -0700)]
x86: Move acpi_get_rsdp_addr() ACPI tables to the writer
Move this over to use a writer file, moving the code from the x86
implementation.
There is no need to store a separate variable since we can simply access
the ACPI context.
With this, the original monolithic x86 function for writing ACPI tables
is gone.
Note that QEMU has its own implementation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:03:02 +0000 (09:03 -0700)]
x86: Move device-specific ACPI tables to a writer function
Move this over to use a writer function, moving the code from the x86
implementation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:03:01 +0000 (09:03 -0700)]
x86: acpi: Update acpi_fill_csrt() to use acpi_ctx
Update this function to the newer style, so we can avoid passing and
returning an address through this function.
Also move this function out of the x86 code so it can be used by other
archs.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Simon Glass [Wed, 1 Dec 2021 16:03:00 +0000 (09:03 -0700)]
x86: Move CSRT table to a writer function
Move this table over to use a writer function, moving the code from the
x86 implementation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:59 +0000 (09:02 -0700)]
x86: Move TCPA table to a writer function
Move this table over to use a writer function, for x86 only.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:58 +0000 (09:02 -0700)]
x86: Move MADT table to a writer function
Move this table over to use a writer function, for x86 only.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:57 +0000 (09:02 -0700)]
x86: Move TPM2 table to a writer function
Move this table over to use a writer function, for x86 only.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:56 +0000 (09:02 -0700)]
x86: Move SSDT table to a writer function
Move this table over to use a writer function, moving the code from the
x86 implementation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:55 +0000 (09:02 -0700)]
x86: Move FACP table into separate functions
Each board has its own way of creating this table. Rather than calling the
acpi_create_fadt() function for each one from a common acpi_write_fadt()
function, just move the writer into the board-specific code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Simon Glass [Wed, 1 Dec 2021 16:02:54 +0000 (09:02 -0700)]
x86: Move FADT table to a writer function
Move this table over to use a writer function, for x86 only.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:53 +0000 (09:02 -0700)]
x86: Move GNVS table to a writer function
Move this table over to use a writer function, for x86 only. Handle the
two cases
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:52 +0000 (09:02 -0700)]
x86: Move DSDT table to a writer function
Move this table over to use a writer function, moving the code from the
x86 implementation.
Add a pointer to the DSDT in struct acpi_ctx so we can reference it later.
Disable this table for sandbox since we don't actually compile real ASL
code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:51 +0000 (09:02 -0700)]
x86: Move FACS table to a writer function
Move this table over to use a writer function, moving the code from the
x86 implementation.
Add a pointer to the DSDT in struct acpi_ctx so we can reference it later.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:50 +0000 (09:02 -0700)]
x86: Move base tables to a writer function
Use the new ACPI writer to write the base tables at the start of the area,
moving this code from the x86 implementation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:49 +0000 (09:02 -0700)]
x86: Use the ACPI table writer
Use the new ACPI writer to write the ACPI tables. At present this is all
done in one monolithic function. Future work will split this out.
Unfortunately the QFW write_acpi_tables() function conflicts with the
'writer' version, so disable that for sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:48 +0000 (09:02 -0700)]
x86: acpi: Split out context creation from base tables
At present acpi_setup_base_tables() both sets up the ACPI context and
writes out the base tables.
We want to use an ACPI writer to write the base tables, so split this
function into two, with acpi_setup_ctx() doing the context set, and
acpi_setup_base_tables() just doing the base tables.
Disable the writer's write_acpi_tables() function for now, to avoid
build errors. It is enabled in a following patch.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:47 +0000 (09:02 -0700)]
acpi: Add a linker list for ACPI tables
At present we call lots of functions to generate the required ACPI tables.
It would be better to standardise these functions and allow them to be
automatically collected and used when needed.
Add a linker list to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:46 +0000 (09:02 -0700)]
acpi: Add a table start
It is useful to record the start of an ACPI table so that offsets from
that point can be easily calculated.
Add this to the context and set it before calling the writer method.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:45 +0000 (09:02 -0700)]
acpi: Move acpi_fill_header() to the generic header
This function is not x86-specific so move it into the common header file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:44 +0000 (09:02 -0700)]
acpi: Allow include files within the board directory
Some .asl files include others using the iasl 'include' directive. This
needs to be able to find the files referenced.
For an out-of-tree build the source directory is not the current
directory. Moreover, U-Boot preprocesses the input file and puts the
result in the output directory. So iasl does not know where the real
source file came from.
Add a -I option to produce the correct behaviour. We could add an option
to not preprocess the .asl source, but for now that seems unnecessary.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:43 +0000 (09:02 -0700)]
acpi: Use finer-grained control of ACPI-table generation
Rather than keying everything off ACPIGEN, use the main
GENERATE_ACPI_TABLE option to determine whether the core ACPI code
is included. Make sure these option are not enabled in SPL/TPL since we
never generate tables there.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:42 +0000 (09:02 -0700)]
efi: Correct address handling with ACPI tables
The current EFI implementation confuses pointers and addresses. Normally
we can get away with this but in the case of sandbox it causes failures.
Despite the fact that efi_allocate_pages() returns a u64, it is actually
a pointer, not an address. Add special handling to avoid a crash when
running 'bootefi hello'.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:41 +0000 (09:02 -0700)]
efi: Correct call to write_acpi_tables()
This must be passed a ulong, not a u64. Fix it to avoid LTO warnings on
sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:40 +0000 (09:02 -0700)]
sandbox: Allow building with GENERATE_ACPI_TABLE
At present this option is missing a header file, a function prototype and
the qfw driver needs a header included.
Fix these problems so we can enable this option on sandbox. This will
increase the build coverage.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:39 +0000 (09:02 -0700)]
x86: Tidy up use of CONFIG_ACPIGEN
This is enabled for quite a few boards which don't create ACPI tables.
Tidy this up by dropping the option for some boards.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:38 +0000 (09:02 -0700)]
arm: Allow supporting ACPI-table generation
Some ARM boards are using ACPI now. It seems that U-Boot should support
this method. Add ARM to the list of archs which can generate ACPI tables.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:37 +0000 (09:02 -0700)]
x86: Move the acpi table to generic global_data
Allow this to be used on any arch. Also convert to using macros so that
we can check the CONFIG option in C code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 1 Dec 2021 16:02:36 +0000 (09:02 -0700)]
x86: Allow any arch to generate ACPI tables
These have sadly found their way to ARM now. Allow any arch to support
generating ACPI tables.
Disable this for the tools build.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 25 Jan 2022 13:01:43 +0000 (08:01 -0500)]
Merge branch '2022-01-24-assorted-updates'
- A number of cleanups to Python code based on running pylint
- Integrate changes so that we can run "make pylint" and compare the
results to a current baseline. Keep this as a manual check for now.
- Improve functionality of moveconfig.py
- pci: iproc: Set all 24 bits of PCI class code
Tom Rini [Mon, 24 Jan 2022 21:08:41 +0000 (21:08 +0000)]
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Simon Glass [Sat, 18 Dec 2021 21:54:35 +0000 (14:54 -0700)]
moveconfig: Fix some pylint errors
There are over 200 errors in this file. Fix some of them, starting at the
beginning of the file. Future work can continue this effort.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 18 Dec 2021 21:54:34 +0000 (14:54 -0700)]
moveconfig: Use a function to read files
At present there is quite a bit of ad-hoc code reading from files. The
most common case is to read the file as lines. Put it in a function and
set the unicode encoding correctly.
Avoid writing back to a file when there are obviously no changes as this
speeds things up slightly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 18 Dec 2021 21:54:33 +0000 (14:54 -0700)]
moveconfig: Use a function to write files
At present there is quite a bit of ad-hoc code writing to files. The
treatment of newlines is different in some of them. Put it in a function
and set the unicode encoding correctly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 18 Dec 2021 21:54:32 +0000 (14:54 -0700)]
moveconfig: Drop check for old Python
Python 2 is not supported anymore and Python 3 has had subprocess.DEVNULL
since version 3.3 which was released in 2012. Drop the unnecessary check.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Simon Glass [Sat, 18 Dec 2021 21:54:31 +0000 (14:54 -0700)]
moveconfig: Convert to ArgumentParser
This is a newer library and is now preferred for Python scripts. Update
the code to use it instead of optparse
Use 'args' instead of 'options' throughout, since this is the term used
in that module. Also it helps to avoid confusion with CONFIG options, a
term that is used in this file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 18 Dec 2021 21:54:30 +0000 (14:54 -0700)]
moveconfig: Use single quotes
Quite a few places use double quotes. Fix this to be consistent with
other Python code in U-Boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Simon Glass [Sat, 18 Dec 2021 15:09:46 +0000 (08:09 -0700)]
moveconfig: Allow querying board configuration
It is useful to be able to find out which boards define a particular
option, or combination of options. This is not as easy as grepping the
defconfig files since many options are implied by others.
Add a -f option to the moveconfig tool to permit this. Update the
documentation to cover this, including a better title for the doc page.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 18 Dec 2021 15:09:45 +0000 (08:09 -0700)]
moveconfig: Allow adding unit tests
Add a -t option to run unit tests in this program. So far, there is none.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 18 Dec 2021 15:09:44 +0000 (08:09 -0700)]
moveconfig: Sort the options
Put the options in sorted order by their short name so it is easier to
find an option.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 18 Dec 2021 15:09:43 +0000 (08:09 -0700)]
moveconfig: Read the database in a separate function
Move this code out into a function so it can be used elsewhere.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 18 Dec 2021 15:09:42 +0000 (08:09 -0700)]
moveconfig: Correct operation of the 'imply' feature
This doesn't work anymore, since the Kconfig update. The script has no
tests so we did not notice. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Heinrich Schuchardt [Fri, 26 Nov 2021 22:30:27 +0000 (23:30 +0100)]
test: fix pylint warnings in test_env.py
* assert does not need parentheses
* add module docstring
* fix misspelled constant True
* limit lines to 100 characters
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Simon Glass [Mon, 22 Nov 2021 03:48:40 +0000 (20:48 -0700)]
Makefile: Add a pylint checker to the build
At present the Python code in U-Boot is somewhat inconsistent, with some
files passing pylint quite cleanly and others not.
Add a way to track progress on this clean-up, by checking that no module
has got any worse as a result of changes.
This can be used with 'make pylint'.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Re-generate pylint.base]
Simon Glass [Mon, 22 Nov 2021 03:48:39 +0000 (20:48 -0700)]
tools: Add init files for Python tools
Add some empty __init__ files for binman, buildman and dtoc so that
pylint is able to recognise these as Python modules and produce more
useful pylint output.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 22 Nov 2021 03:48:38 +0000 (20:48 -0700)]
patman: Update the list of modules
Update the __init__ file to include recently added files.
Add a license header while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 22 Nov 2021 03:48:37 +0000 (20:48 -0700)]
dtoc: Fix up a code comment that confuses pylint
This produces a pylint error at present. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 22 Nov 2021 03:48:36 +0000 (20:48 -0700)]
.gitignore: Ignore any html coverage directory
This is created when checking code coverage of Python tools. Ignore it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Pali Rohár [Wed, 5 Jan 2022 09:50:20 +0000 (10:50 +0100)]
pci: iproc: Set all 24 bits of PCI class code
Register 0x43c in its low 24 bits contains PCI class code.
Update code to set all 24 bits of PCI class code and not only upper 16 bits
of PCI class code.
Use standard U-Boot macro (PCI_CLASS_BRIDGE_PCI << 8) for constructing all
24-bits of PCI class for PCI bridge Normal decode.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Roman Bacik <roman.bacik@broadcom.com>
Tom Rini [Mon, 24 Jan 2022 15:39:28 +0000 (10:39 -0500)]
Merge branch '2022-01-24-assorted-fixes-and-updates'
- Assorted dumpimage/mkimage fixes, allow setting the signature
algorithm on the command line with mkimage
- Bugfix to the misc uclass, CONFIG_MP / CMD_MP Kconfig logic improved,
updated Xen platform MAINTAINERS entry and fixed vexpress_aemv8a_semi
booting.
Ashok Reddy Soma [Mon, 17 Jan 2022 09:16:50 +0000 (10:16 +0100)]
cmd: Add Kconfig option for multiprocessor cmds
Add Kconfig option(CONFIG_CMD_MP) to enable or disable multiprocessor
commands. Compile cmd/mp.c based on CONFIG_CMD_MP.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Heinrich Schuchardt [Sat, 15 Jan 2022 19:12:56 +0000 (20:12 +0100)]
mkimage: struct stat.st_size may not be long
The component st_size of struct stat is of type off_t. Depending on the
system printing it using %ld leads to a warning:
tools/mkimage.c:438:54: warning: format '%ld' expects argument of type
'long int', but argument 5 has type
'off_t' {aka 'long long int'} [-Wformat=]
438 | "%s: Bad size: \"%s\" is not valid image: size %ld < %u\n",
| ~~^
| |
| long int
| %lld
When comparing an off_t value to a 32bit integer we should not convert to
uint32_t but to off_t which may be wider.
Reported-by: Milan P. Stanić <mps@arvanta.net>
Fixes:
331f0800f1a3 ("mkimage: allow -l to work on block devices on Linux")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Anastasiia Lukianenko [Wed, 19 Jan 2022 20:49:21 +0000 (22:49 +0200)]
MAINTAINERS: Update e-mail in Xen maintainership
Changing e-mail because of leaving EPAM.
Signed-off-by: Anastasiia Lukianenko <vicooodin@gmail.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Jan Kiszka [Fri, 14 Jan 2022 09:21:19 +0000 (10:21 +0100)]
mkimage: Allow to specify the signature algorithm on the command line
This permits to prepare FIT image description that do not hard-code the
final choice of the signature algorithm, possibly requiring the user to
patch the sources.
When -o <algo> is specified, this information is used in favor of the
'algo' property in the signature node. Furthermore, that property is set
accordingly when writing the image.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Jan Kiszka [Fri, 14 Jan 2022 09:21:18 +0000 (10:21 +0100)]
mkimage: Drop unused OPT_STRING constant
The actual opt string is inlined - and different. Seems this was a
left-over from older versions of
603e26f76346.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Jan Kiszka [Fri, 14 Jan 2022 09:21:17 +0000 (10:21 +0100)]
image-fit: Make string of algo parameter constant
Modifications would be invalid.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
John Keeping [Tue, 11 Jan 2022 17:04:49 +0000 (17:04 +0000)]
misc: mark write buffer const
The write operation in misc_ops already takes a "const void *" buffer,
but misc_write() takes a mutable "void *". There's no reason for this,
so make misc_write() consistent with the standard write() prototype.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Stefan Eichenberger [Mon, 10 Jan 2022 17:48:32 +0000 (18:48 +0100)]
tools/fitimage: make sure dumpimage still works when "@" are detected
fit_verify_header fails if it detects unit addresses "@". However, this
will break tools like dumpimage on fit images which worked with previous
versions of the tool (e.g. 2020.04 vs 2021.07). As an example the output
of:
dumpimage -l <fit image>
is:
FIT description: U-Boot fitImage for Linux Distribution
Created: Thu Jan 1 01:00:00 1970
Image 0 (kernel@1)
Description: Linux kernel
Created: Thu Jan 1 01:00:00 1970
Type: Kernel Image
Compression: gzip compressed
Data Size: 6442456 Bytes = 6291.46 KiB = 6.14 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x80080000
Entry Point: 0x80080000
Hash algo: sha256
Hash value: ...
Image 1 (fdt@freescale_fsl-s32g274a-evb.dtb)
Description: Flattened Device Tree blob
Created: Thu Jan 1 01:00:00 1970
Type: Flat Device Tree
Compression: uncompressed
Data Size: 39661 Bytes = 38.73 KiB = 0.04 MiB
Architecture: AArch64
Hash algo: sha256
Hash value: ...
Default Configuration: 'conf@freescale_fsl-s32g274a-evb.dtb'
Configuration 0 (conf@freescale_fsl-s32g274a-evb.dtb)
Description: 1 Linux kernel, FDT blob
Kernel: kernel@1
FDT: fdt@freescale_fsl-s32g274a-evb.dtb
Hash algo: sha256
Hash value: unavailable
But with newer version it shows:
dumpimage -l <fit image>
GP Header: Size
d00dfeed LoadAddr 62f0a4
This commit will output a warning that unit addresses were detected but
will not fail:
dumpimage -l <fit image>
Image contains unit addresses @, this will break signing
...
Signed-off-by: Stefan Eichenberger <eichest@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Stefan Eichenberger [Mon, 10 Jan 2022 17:48:31 +0000 (18:48 +0100)]
tools/fitimage: remove redundant format check
fit_extract_contents does a fit_check_format even thought it was already
checked during imagetool_verify_print_header.
Therefore, this check is not necessary. This commit removes the
redundancy.
Signed-off-by: Stefan Eichenberger <eichest@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Andre Przywara [Fri, 21 Jan 2022 16:36:04 +0000 (16:36 +0000)]
vexpress64: semi_defconfig: disable CRC32 support
Commit
270f8710f92f ("crc32: Add crc32 implementation using
__builtin_aarch64_crc32b") enabled the usage of ARMv8 CRC instructions
by default, for all arm64 builds. And indeed all Arm Ltd. v8 Cortex-A
cores support the instructions, and they are mandatory starting with
architecture revision v8.1, so realistically every known hardware
implementation should support them.
The Arm Fastmodel however defaults to the bare minimum ARMv8 feature set
by default, which means v8.0 without the CRC instructions, so U-Boot
hangs very early at the moment, without any output (the boot-wrapper or
TF-A printing the last visible lines).
Support for those instructions can be enabled on the model command line
by either:
-C cluster0.cpu0.enable_crc32=1 (for each core)
or by using a higher architecture revision by default:
-C cluster0.has_arm_v8-1=1 (for each cluster)
Of course any arch revision higher than v8.1 would work as well.
But for the sake of a smooth out-of-the-box experience, let's just
disable the usage of those instructions in the defconfig, to avoid
random hangs without any clues.
Reported-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Marek Vasut <marex@denx.de>
Tom Rini [Mon, 24 Jan 2022 13:19:31 +0000 (08:19 -0500)]
Merge tag 'u-boot-stm32-
20220124' of https://source.denx.de/u-boot/custodians/u-boot-stm
- stm32mp15: sync DT with kernel v5.16
- stm32mp15: Enable OF_BOARD config flag
- DHCOM: sync DT with kernel 5.15.12
- stm32mp: Fix USB boot device
- stm32mp: Remove bootcount activation
- stm32mp: Fix board_get_alt_info_mmc()
- board: stm32mp1: solve compilation issue when ENV_IS_IN_MMC is deactivated
- stm32prog: add partition name in treat_partition_list error messages
Patrice Chotard [Thu, 20 Jan 2022 07:19:15 +0000 (08:19 +0100)]
configs: stm32mp15: Enable OF_BOARD flag
Since commit
985503439762 ("fdt: Don't call board_fdt_blob_setup()
without OF_BOARD") board_fdt_blob_setup() is no more called on
STM32MP platforms in trusted boot which hangs during boot process.
Enable OF_BOARD flag to fix this issue.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Patrick Delaunay [Tue, 18 Jan 2022 09:33:14 +0000 (10:33 +0100)]
stm32prog: add partition name in treat_partition_list error messages
Add the partition name and remove the line number in error messages
of treat_partition_list() to provide correct information to user of
STM32CubeProgrammer.
The "line number" value was confusing because it is incorrect here;
the index in part_array[] is not aligned with the line number in
the parsed Layout file, because the empty lines and the lines beginning
by '#' are skipped during the first parsing in parse_flash_layout().
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Tue, 11 Jan 2022 15:37:21 +0000 (16:37 +0100)]
board: stm32mp1: solve compilation issue when ENV_IS_IN_MMC is deactivated
Solve compilation issue on undefined CONFIG_SYS_MMC_ENV_DEV when
CONFIG_ENV_IS_IN_MMC is deactivated on STMicroelectronics boards
defconfig
Fixes:
9f97193616f1 ("board: stm32mp1: use CONFIG_SYS_MMC_ENV_DEV when available")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Heinrich Schuchardt [Tue, 11 Jan 2022 14:58:08 +0000 (15:58 +0100)]
stm32mp: fix board_get_alt_info_mmc()
MAX_SEARCH_PARTITIONS is the highest possible partition number.
Do not skip the last partition in board_get_alt_info_mmc().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Marek Vasut [Thu, 30 Dec 2021 22:46:47 +0000 (23:46 +0100)]
ARM: dts: stm32: Synchronize DHCOM DTs with Linux 5.15.12
Synchronize DH DHCOM DTs with Linux commit
25960cafa06e ("Linux 5.15.12").
There is no functional change to the resulting DTs. The eeprom0 alias and
PHY reset GPIO are now reinstated in SoM u-boot dtsi.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Marek Vasut [Thu, 30 Dec 2021 22:46:46 +0000 (23:46 +0100)]
ARM: dts: stm32: Synchronize DHCOR DTs with Linux 5.15.12
Synchronize DH DHCOR DTs with Linux commit
25960cafa06e ("Linux 5.15.12").
There is no functional change to the resulting DTs. The eeprom0 alias is
now reinstated in SoM u-boot dtsi, the PHY reset GPIO is reinstated in AV96
u-boot dtsi.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Patrick Delaunay [Fri, 17 Dec 2021 15:30:22 +0000 (16:30 +0100)]
arm: dts: stm32mp15: alignment with v5.16
Device tree alignment with Linux kernel v5.16-rc5
- ARM: dts: stm32: set otg-rev on stm32mp151
- ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151
- ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
- ARM: dts: stm32: fix SAI sub nodes register range
- ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Tue, 7 Dec 2021 09:05:59 +0000 (10:05 +0100)]
stm32mp: correct the dependency for bootcount configs
Default value for CONFIG_SYS_BOOTCOUNT_SINGLEWORD and
CONFIG_SYS_BOOTCOUNT_ADDR are only needed when
CONFIG_BOOTCOUNT_GENERIC is used.
This patch avoids to define these configs when an other bootcount backend
is activated, for example for CONFIG_BOOTCOUNT_ENV.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Tue, 7 Dec 2021 09:05:58 +0000 (10:05 +0100)]
stm32mp: remove the bootcount activation
Today the bootcount is not managed by the Linux kernel for STM32MP15 as
we don't have driver to update the used backup register in TAMP and the
recovery command still executes the normal bootcmd with
'altbootcmd=run bootcmd'.
So the bootcount feature is never used, the config CONFIG_BOOTCOUNT_LIMIT
and the associated environment variable 'altbootcmd' can be removed to
reduce the U-Boot size.
Each boards can re-enable this feature later in their defconfig, if it is
needed, with the expected backend, for example CONFIG_BOOTCOUNT_GENERIC
or CONFIG_BOOTCOUNT_ENV.
CC: Marek Vasut <marex@denx.de>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Marek Vasut [Mon, 6 Dec 2021 20:58:09 +0000 (21:58 +0100)]
ARM: dts: stm32: Add DFU support for DHCOR recovery
This patch configures U-Boot SPL for DHCOR SoM to permit DFU upload of
SPL and subsequent u-boot.itb for recovery or commissioning purposes.
To start U-Boot on DHCOR based board, e.g. Avenger96, proceed as follows:
- Install dfu-util on the host PC (in debian this is package 'dfu-util')
- Power off the Avenger96 board.
- Connect both USB-serial console and USB-OTG microB ports to host PC.
- Switch Avenger96 to USB boot mode -- BOOT0..2 switches all set to 0.
- Power on the Avenger96 board.
- Verify using '$ dmesg' that a new device has been detected as follows:
New USB device found, idVendor=0483, idProduct=df11, bcdDevice= 2.00
New USB device strings: Mfr=1, Product=2, SerialNumber=3
Product: DFU in HS Mode @Device ID /0x500, @Revision ID /0x0000
Manufacturer: STMicroelectronics
- Upload U-Boot SPL:
$ dfu-util -a 1 -D u-boot-spl.stm32
- Upload U-Boot proper:
$ dfu-util -a 0 -D u-boot.itb
- At this point, SPL will wait for user to press "Ctrl-C" on serial
console. When ready to interact with U-Boot, press Ctrl-C to start
the bootloader.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Marek Vasut [Mon, 6 Dec 2021 20:58:08 +0000 (21:58 +0100)]
arm: stm32mp: Fix USB boot device report
In case the SoC reports the boot device type is USB, it means the SPL was
loaded via BootROM DFU mode. Currently the spl_boot_device() returns boot
device as USB host, change it to DFU instead, so the SPL can continue the
DFU boot and load U-Boot via DFU.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tom Rini [Sun, 23 Jan 2022 14:54:49 +0000 (09:54 -0500)]
Merge https://source.denx.de/u-boot/custodians/u-boot-sh
- rzg2_beacon updates
Adam Ford [Tue, 11 Jan 2022 13:21:06 +0000 (07:21 -0600)]
arm: dts: rz-g2-beacon-u-boot: Enable pinmux for QSPI
When booting from QSPI, the boot ROM appears to mux the QSPI
pins, but it's not guaranteed to be setup when booting from
eMMC. Fix this by explicitly configuring the pinmux.
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Fri, 17 Dec 2021 19:47:59 +0000 (13:47 -0600)]
arm: rmobile: rzg2_beacon: Migrate reset to SYSRESET_PSCI
Instead of a custom cpu_reset function, use the sysreset_psci
instead to reduce redundant code clutter.
Signed-off-by: Adam Ford <aford173@gmail.com>
Tom Rini [Sat, 22 Jan 2022 20:43:36 +0000 (15:43 -0500)]
Merge tag 'efi-2022-04-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2022-04-rc1-2
Documentation:
* describe printf() format codes
UEFI
* enable more algorithms for UEFI image verification, e.g. SHA256-RSA2048
General
* simplify printing short texts for GUIDs
* provide a unit test for printing GUIDs
Tom Rini [Fri, 21 Jan 2022 19:01:41 +0000 (14:01 -0500)]
Merge branch '2022-01-21-Kconfig-migrations'
- Migrate CONFIG_KEEP_SERVERADDR, CONFIG_UDP_CHECKSUM, CONFIG_TIMESTAMP,
CONFIG_BOOTP_SERVERIP, CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR,
CONFIG_SYS_MAX_FLASH_BANKS_DETECT, CONFIG_SYS_MAX_FLASH_BANKS and
CONFIG_AT91_EFLASH to Kconfig
Patrick Delaunay [Tue, 4 Jan 2022 13:24:01 +0000 (14:24 +0100)]
Convert CONFIG_AT91_EFLASH to Kconfig
This converts the following to Kconfig:
CONFIG_AT91_EFLASH
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Eugen Hristev <eugen.hristev@microchip.com>
Patrick Delaunay [Tue, 4 Jan 2022 13:24:00 +0000 (14:24 +0100)]
configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig
Use moveconfig.py script to convert define CONFIG_SYS_MAX_FLASH_BANKS
and CONFIG_SYS_MAX_FLASH_BANKS_DETECT to Kconfig and move these entries
to defconfigs.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
[trini: Re-switch to IS_ENABLED check in spi-nor-core.c, re-run migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
Patrick Delaunay [Tue, 4 Jan 2022 13:23:59 +0000 (14:23 +0100)]
mtd: cfi: change CONFIG_SYS_MAX_FLASH_BANKS_DETECT as boolean
Prepare migration to Kconfig.
CONFIG_SYS_MAX_FLASH_BANKS_DETECT becomes boolean and
CONFIG_SYS_MAX_FLASH_BANKS define the MAX size, also used
for detection when CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
(CFI_MAX_FLASH_BANKS = CONFIG_SYS_MAX_FLASH_BANKS).
CONFIG_SYS_MAX_FLASH_BANKS become mandatory when
CONFIG_SYS_MAX_FLASH_BANKS_DETECT is activated.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Patrick Delaunay [Tue, 4 Jan 2022 13:23:58 +0000 (14:23 +0100)]
mtd: cfi: introduce CFI_FLASH_BANKS
Replace CONFIG_SYS_MAX_FLASH_BANKS by CFI_FLASH_BANKS to prepare
Kconfig migration and avoid to redefine CONFIG_SYS_MAX_FLASH_BANKS
in cfi_flash.h.
After this patch CONFIG_SYS_MAX_FLASH_BANKS should be never used in
the cfi code: use CFI_MAX_FLASH_BANKS for struct size or CFI_FLASH_BANKS
for number of CFI banks which can be dynamic.
This patch modify all the files which include mtd/cfi_flash.h.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Patrick Delaunay [Tue, 4 Jan 2022 13:23:57 +0000 (14:23 +0100)]
cmd: Fix up warnings in flash.c
Tidy up the warnings reported by checkpatch.pl to prepare next patches
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Alexandru Gagniuc [Thu, 30 Dec 2021 16:39:59 +0000 (10:39 -0600)]
spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to Kconfig
Falcon mode is very useful in improving boot speed. A question that
Falcon mode asks is "Where do I look for the kernel". With MMC boot
media, the correct answer is CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR.
The scope of this patch is to move this to Kconfig.
It is possible for a system to support Falcon mode from NOR but not
MMC. In that case, mmc_load_image_raw_os() would not be used. To
address this, conditionally compile mmc_load_image_raw_os() when
SPL_FALCON_BOOT_MMCSD, instead of SPL_OS_BOOT.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Move spl_start_uboot to its own guard in spl_mmc.c, rerun migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
Simon Glass [Sat, 18 Dec 2021 18:27:52 +0000 (11:27 -0700)]
net: Drop #ifdefs with CONFIG_BOOTP_SERVERIP
Use IS_ENABLED() instead, to reduce the number of build paths.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Simon Glass [Sat, 18 Dec 2021 18:27:51 +0000 (11:27 -0700)]
Convert CONFIG_BOOTP_SERVERIP to Kconfig
This converts the following to Kconfig:
CONFIG_BOOTP_SERVERIP
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 18 Dec 2021 18:27:50 +0000 (11:27 -0700)]
Convert CONFIG_TIMESTAMP to Kconfig
This converts the following to Kconfig:
CONFIG_TIMESTAMP
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 18 Dec 2021 18:27:49 +0000 (11:27 -0700)]
Convert CONFIG_UDP_CHECKSUM to Kconfig
This converts the following to Kconfig:
CONFIG_UDP_CHECKSUM
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 18 Dec 2021 18:27:48 +0000 (11:27 -0700)]
Convert CONFIG_KEEP_SERVERADDR to Kconfig
This converts the following to Kconfig:
CONFIG_KEEP_SERVERADDR
Drop the preprocessor usage also.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tom Rini [Thu, 20 Jan 2022 17:40:20 +0000 (12:40 -0500)]
Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- fdt_support: Add fdt_for_each_node_by_compatible() helper macro
(Marek)
- turris_omnia: Fixup SATA or PCIe nodes at runtime in DT blob (Pali)
- pci_mvebu: Add support for Kirkwood PCIe controllers (Pali)
- SPL: More verifications for kwbimage in SPL (Pali)
- mvebu: Remove comphy_update_map() (Pali)
- Minor misc stuff
Tom Rini [Thu, 20 Jan 2022 14:40:04 +0000 (09:40 -0500)]
Merge tag 'u-boot-amlogic-
20220120' of https://source.denx.de/u-boot/custodians/u-boot-amlogic
- Disable CONFIG_NET_RANDOM_ETHADDR for android configs
- meson64_android: define raw parts for bootloader to permit flashing with fastboot
- vim3: configure serial# from ethaddr to permit using fastboot like sei510/610
Tom Rini [Thu, 20 Jan 2022 14:39:45 +0000 (09:39 -0500)]
Merge tag 'doc-2022-04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request doc-2022-04-rc1
Replace @return by Return: in code comments.
Pali Rohár [Tue, 18 Jan 2022 09:43:23 +0000 (10:43 +0100)]
arm: a37xx: Disable CONFIG_DEBUG_UART_ANNOUNCE
After next branch was merged to v2022.01 release, U-Boot on A3720 started
printing "<debug_uart>" line on UART during booting. There is no need to
print this debug line by default, so disable it via config option
CONFIG_DEBUG_UART_ANNOUNCE in all config files for Armada 3720 boards.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Tue, 18 Jan 2022 09:33:20 +0000 (10:33 +0100)]
phy: marvell: Remove unused function comphy_update_map()
This weak function is not used anymore, so completely remove it.
Private struct comphy_map is not used by any board code anymore, so move it
into private driver header file comphy_core.h.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Tue, 18 Jan 2022 09:33:19 +0000 (10:33 +0100)]
arm: mvebu: turris_mox: Convert comphy_update_map() to board_fix_fdt()
Code in board_fix_fdt() already detects connected MOX modules so there is
no need to have custom comphy_update_map() function for setting serdes
speeds.
This change sets phy-mode for MOX SFP module (when present) to sgmii.
Comphy driver then sets sgmii serdes speed for this module to 1.25G.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Heinrich Schuchardt [Sun, 16 Jan 2022 22:11:58 +0000 (23:11 +0100)]
drivers: octeon: get rid of Unicode in code
Placing Unicode control codes <U+0080><U+0093> in the middle of a comment
does not make much sense. Let's get rid of all Unicode in
drivers/ram/octeon/octeon3_lmc.c.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Marek Behún [Fri, 14 Jan 2022 13:31:45 +0000 (14:31 +0100)]
arm: mvebu: spl: Fix 100 column exceeds
Fix 100 column exceeds in arch/arm/mach-mvebu/spl.c.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Marek Behún [Fri, 14 Jan 2022 13:31:44 +0000 (14:31 +0100)]
arm: mvebu: spl: Use IS_ENABLED() instead of #ifdef where possible
Use the preferred
if (IS_ENABLED(X))
instead of
#ifdef X
where possible.
There are still places where this is not possible or is more complicated
to convert in this file. Leave those be for now.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Marek Behún [Fri, 14 Jan 2022 13:31:43 +0000 (14:31 +0100)]
arm: mvebu: spl: Use preferred types u8/u16/u32 instead of uintN_t
Checkpatch warns about using uint32/16/8_t instead of u32/16/8.
Use the preferred types.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Marek Behún [Fri, 14 Jan 2022 13:31:42 +0000 (14:31 +0100)]
arm: mvebu: spl: Print srcaddr in error message
Print the wrong srcaddr (spl_image->offset) in error message also for
SATA case.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Fri, 14 Jan 2022 13:31:41 +0000 (14:31 +0100)]
arm: mvebu: Check for kwbimage data checksum
Last 4 bytes of kwbimage boot image is checksum. Verify it via the new
spl_check_board_image() function which is called by U-Boot SPL after
loading kwbimage.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Fri, 14 Jan 2022 13:31:40 +0000 (14:31 +0100)]
SPL: Add support for checking board / BootROM specific image types
Commit
9baab60b8054 ("SPL: Add support for parsing board / BootROM specific
image types") added support for loading board specific image types.
This commit adds support for a new weak function spl_parse_board_header()
which is called after loading boot image. Board may implement this function
for checking if loaded board specific image is valid.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>