MingLiang Dong [Tue, 1 Jan 2019 03:27:47 +0000 (22:27 -0500)]
amvecm: Flash a horizontal line when enable local contrast function [1/1]
PD#SWPL-3563
Problem:
1.Flash a horizontal line in the bottom of the screen in
HDMI with 4K 50/60Hz signal after enable local contrast function
2.local contrast block is obvious when platform reboot
Solution:
1.Local contrast write curve with RDMA
2.lc init reset lc module
Verify:
verify on TL1
Change-Id: Ifd4218e3688d5b0728a6fcba81558467a1c3e05f
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Evoke Zhang [Tue, 8 Jan 2019 05:29:50 +0000 (00:29 -0500)]
lcd: optimize tcon type for extensible usage [1/1]
PD#SWPL-3957
Problem:
tcon_type need extensible usage for special case
Solution:
tcon_type change to hex value
Verify:
x301
Change-Id: I26cb58ffc1cd2f525c8cf0f7c08b0d9cf66766e5
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Tao Zeng [Fri, 4 Jan 2019 09:04:45 +0000 (17:04 +0800)]
ramdump: add ramdump support for TL1 [4/4]
PD#TV-1924
Problem:
On TL1, ramdump is not enabled.
Solution:
Add ramdump support for TL1 chips in kernel.
Also add sticky register config for other chips
Verify:
tl1_x301_v1
Change-Id: I67a11d128343ff9e615377b19914a3fc77b7acef
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Evoke Zhang [Mon, 7 Jan 2019 08:40:44 +0000 (03:40 -0500)]
lcd: add tablet mode lvds & vbyone support for tl1 [1/1]
PD#TV-2080
Problem:
need tablet mode support for tl1
Solution:
add tablet mode support for tl1
Verify:
x301
Change-Id: Ic7a6ae94255b6152236ab0d991bce9d748d670ac
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
shuanglong.wang [Tue, 9 Oct 2018 09:33:14 +0000 (17:33 +0800)]
video: drain and hold frame when pattern broken. [1/1]
PD#SWPL-795
Problem:
video video caton
Solution:
1. For 23.97 and 29.97fps, broken patten case, such as 2323..2233..2323
(23.97), 222..2213(2)22(29.97) will hold one sync to toggle.
For 23.97 and 29.97fps, broken patten case, such as 2323..233223...2323
(23.97), 222..223122...22(29.97), will drain frame one sync to toggle.
2. For 24 and 30fps, every 16.6s will occur pattern broken, one frame
will display less vsync. For 24, will happen
22221222, for 30, will
happen
3232223232. Here will escape one sync and also hold one sync to
ensure pattern detection not broken, which others will lead patten
broken, and nothold or drain frame, then frame frezee or lost will
happen.
3. add pts-trace debug. Follow command could help debug video av sync.
echo 0x400000 > /sys/module/amvideo/parameters/debug_flag
echo 1,1,1 > /sys/kernel/debug/video/pts_log_enable
Above command will print too many debug info, you can use follow
echo 0 > /proc/sys/kernel/printk && dmesg -c > /dev/null
dmesg > kernel.log
Verify:
verify by p212
Change-Id: Icc03faec772937c273ca74be67f5c52ae25fea39
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
rongrong zhou [Mon, 7 Jan 2019 08:14:56 +0000 (16:14 +0800)]
video: disable video in early suspend [1/1]
PD#SWPL-2736
Problem:
suspend green screen
Solution:
disable video in early suspend
Verify:
Ampere
Change-Id: If5ad13d2964b1541791d95ffb239293ab1e4ffb6
Signed-off-by: rongrong zhou <rongrong.zhou@amlogic.com>
Hui Zhang [Fri, 4 Jan 2019 06:35:51 +0000 (14:35 +0800)]
dts: release memory of the reserved 1MB [2/2]
PD#SWPL-2372
Problem:
phy addr (0 - 0x100000) is reserved before. once it is release for system use.
it will be polluted by video decoder (avs2 & vp9)
Solution:
init hw addr (not 0) in decoder to avoid 0 address polluted.
then release reserved 1MB memory space in dts
Verify:
U212
Change-Id: I36f6caa09267ab1180ff12cfed9b9c7befff2842
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
shihong.zheng [Tue, 6 Nov 2018 12:29:19 +0000 (20:29 +0800)]
canvas: get canvas w/h for frame check [2/2]
PD#SWPL-1738
Problem:
support frame crc32 check and dump yuv.
Solution:
support frame check and yuv dump in media_module, add interface
to get canvas width/height.
Verify:
u212
Change-Id: Ieadc95521c4a21bec5685f8c8926d3bb2f92637b
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
Yi Zhou [Tue, 8 Jan 2019 05:59:32 +0000 (13:59 +0800)]
dv: set g12a/b core run_mode_delay as 0 [1/1]
PD#SWPL-3890
Problem:
when starting to play video, the manu bar shakes
Solution:
stb core don't need run mode delay.
Verify:
u212
Change-Id: If8634cfd33598343cef84b93d4757f5d5c9c72e5
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Yi Zhou [Tue, 8 Jan 2019 01:24:45 +0000 (09:24 +0800)]
dv: add compatibility to prevent panic [1/1]
PD#SWPL-3889
Problem:
when the metadata parsed by decode is error, the array will overflow
in dv module.
Solution:
dolby type just appears once in metadata. After parsing dolby type,
breaking the circulation directly.
Verify:
U212
Change-Id: I715e28c1b9a8aab2fcb4059dd132b5b98c043f31
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Shaochan Liu [Thu, 3 Jan 2019 06:57:23 +0000 (14:57 +0800)]
lcd: The panel's backlight is not stable with VAD enabled platform [1/1]
PD#SWPL-3713
Problem:
The panel's backlight is not stable when
enter standby mode after do suspend with
VAD enabled platform
Solution:
bypass undefind resume in lcd resume early
Verify:
verify by t962x2-x301
Change-Id: I8f040de9bebf3ccbdd3b2da3a46540fe676958f6
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
Bencheng Jing [Thu, 27 Dec 2018 11:45:56 +0000 (19:45 +0800)]
amvecm: disable gamma init in aml_vecm_probe [1/1]
PD#SWPL-3143
Problem:
boot logo stretched
Solution:
disable gamma init in aml_vecm_probe
Verify:
x301
Change-Id: I01a5bb609536edd2875ecad0613565a8382f9aef
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
yicheng shen [Fri, 4 Jan 2019 08:06:49 +0000 (03:06 -0500)]
hdmirx: reduce the cpu occupancy rate of hdcp_rx22 [1/2]
PD#SWPL-3360
Problem:
hdcp_rx22 ocupy much of CPU resources.
Solution:
Optimize the method of hdcp_rx22 polling-rx-status function.
Verify:
Local
Change-Id: If1c54b9cc219e32f349b4f4c555fb3fbd3539491
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Xuhua Zhang [Tue, 8 Jan 2019 07:35:23 +0000 (15:35 +0800)]
tvin: vdin: fix TXLX ATv channel switching crash [1/1]
PD#SWPL-3964
Problem:
ATv channel switching crash
Solution:
stop vdin, close afbc
need judge platform, there is not afbce on txlx
Verify:
verify by einstein
Change-Id: Ibcff1da47b9fdca7e1758b0d45e7d6800bfc8080
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
Rongjun Chen [Fri, 4 Jan 2019 03:55:48 +0000 (11:55 +0800)]
WIFI: add mem size for bcm wifi [2/5]
PD#SWPL-3773
Problem:
wifi open fail issue
Solution:
add mem size to fix wifi open fail issue
Verify:
r311
Change-Id: Iab6cd8664026639f5aae108a3bd84faa38708487
Signed-off-by: Rongjun Chen <rongjun.chen@amlogic.com>
Xuhua Zhang [Thu, 3 Jan 2019 07:30:17 +0000 (15:30 +0800)]
vdin: tl1: add viu loop back vpp path [1/1]
PD#SWPL-2676
Problem:
tl1 viu loop back error
Solution:
add viu loop back vpp path
Verify:
TL1 X301
Change-Id: I4069f6bbd6672d89bd93a0c8b275cfffc273c427
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
Xuhua Zhang [Fri, 28 Dec 2018 06:58:49 +0000 (14:58 +0800)]
tvin: vdin: add vdin afbce memory power ctrl [1/1]
PD#SWPL-3635
Problem:
Miss vdin afbce memory power ctrl.
Solution:
Add vdin afbce memory power ctrl.
Verify:
x301_tl1
Change-Id: I94946e3d16027083688735d68b9d023b6bc5c8bf
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
Evoke Zhang [Thu, 3 Jan 2019 11:40:26 +0000 (06:40 -0500)]
backlight: ldim: add analog pwm support [1/1]
PD#SWPL-3702
Problem:
local dimming need analog pwm function
Solution:
add analog pwm support
Verify:
x301
Change-Id: I502bb7505947c1f3670f44d0d307f9546f1d57fd
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Yong Qin [Mon, 7 Jan 2019 07:59:00 +0000 (15:59 +0800)]
cec: too more log when cec bus error [1/1]
PD#SWPL-3921
Problem:
Too more log when cec bus error
Solution:
print the log at log level 1
Verify:
verified on tl1 android p
Change-Id: I8273e0a46470d59160f1ac8dc71494a9abb19b0f
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Zhuo Wang [Tue, 25 Dec 2018 08:16:50 +0000 (16:16 +0800)]
ethernet: setup tx_amp from efuse [1/1]
PD#SWPL-3552
Problem:
tx_v show different for each chip
Solution:
add new function to setup
Verify:
co-work with analog on G12B SOCKET board
Change-Id: I1f2711b9414464c7044efc3f3128cc3c3808cfc5
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
Shunzhou Jiang [Fri, 21 Dec 2018 09:12:01 +0000 (17:12 +0800)]
mailbox: mailbox: add eth calc data read interface [2/2]
PD#SWPL-3498
Problem:
ethernet need read data from efuse
Solution:
add interface to read data
Verify:
g12a_skt
Change-Id: I7ce7ffe2f194c875155e6db8acb55eb8ac5500a0
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Hang Cheng [Thu, 27 Dec 2018 05:40:12 +0000 (13:40 +0800)]
hdmirx: set rxsense sync with hpd [1/1]
PD#SWPL-3540
Problem:
rxsense is high ahead off hpd high, some device
may start hdcp, but hdcp auth always fail
Solution:
set rxsense sync with hpd
Verify:
TL1
Change-Id: I94b4c4f188587e15bac6aceb70803a3aa9082d3b
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Xingyu Chen [Fri, 4 Jan 2019 05:24:22 +0000 (13:24 +0800)]
dts: add ramoops support for tl1 [1/1]
PD#SWPL-3868
Problem:
add ramoops support for tl1
Solution:
alloc reserved memory to save ramoops information in DTS
Verify:
test pass on tl1_skt
Change-Id: Ib5faf2ac54663f1e9eb431d2caa800daf244699e
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Evoke Zhang [Thu, 27 Dec 2018 09:41:44 +0000 (17:41 +0800)]
lcd: fix tcon crash with reserved-memory fail and tcon_clk mistake [2/2]
PD#SWPL-3664
Problem:
tcon will crash in kernel
Solution:
1.prior meson-fb & lcd_tcon reserved-memory
2.fix tcon_clk not enable mistake when use panel ini
Verify:
x301
Change-Id: I97baec22ecabea393f9b0d712456923720fac972
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Zhiwei Yuan [Mon, 24 Dec 2018 12:40:35 +0000 (20:40 +0800)]
dtv_demod: TL1 dtmb cma allocate fail after dtmb->dvbc->dtmb by cmd [1/1]
PD#TV-1748
Problem:
[Hisense-T962X2-P-customer-DTV]:Failed to lock frequency in dtmb system
Solution:
leave the last mode before enter current mode to release the resources
Verify:
verified by t962x2_x301
Change-Id: Ibd7e1d4c67f5a5ad2191e0031fdd0b81812c8606
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
Yong Qin [Thu, 3 Jan 2019 09:32:28 +0000 (17:32 +0800)]
cec: remove print [1/1]
PD#SWPL-3750
Problem:
when debug on, too more log
Solution:
delete
Verify:
verified on android p
Change-Id: Iabaaa4fa205da5453a303c98bce8b71b55c5f77b
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
yicheng shen [Mon, 24 Dec 2018 05:54:59 +0000 (00:54 -0500)]
hdmirx: add allm mode. [1/2]
PD#SWPL-1619
Problem:
need support allm mode
Solution:
add allm mode
Verify:
None
Change-Id: I34d05cfbef4b3fccbbb7c6b35fa613cda9b9cf36
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Evoke Zhang [Tue, 20 Nov 2018 10:38:38 +0000 (18:38 +0800)]
backlight: update ldim setting for tl1 [1/1]
PD#SWPL-2762
Problem:
ldim is changed for tl1
Solution:
update ldim setting for tl1
Verify:
x301
Change-Id: I21b10f27f4d1776db664c62fa7358b38801c7f53
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Xingyu Chen [Wed, 2 Jan 2019 05:09:59 +0000 (13:09 +0800)]
arm: dts: tl1: update the compatible string for timer node [1/1]
PD#SWPL-3791
Problem:
the compatible string with "arm,armv8-timer" is used for AARCH64, we
should use the compatible string with "arm,armv7-timer" for AARCH32
Solution:
update the compatible string for timer node
Verify:
test pass on x301
Change-Id: I17d0f84f61109e885c5584c2703e4256262b72ef
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Evoke Zhang [Tue, 25 Dec 2018 05:10:00 +0000 (13:10 +0800)]
lcd: update phy config for tl1 [1/1]
PD#SWPL-3109
Problem:
tl1 tcon phy config need update
Solution:
1.update tcon phy config for tl1
2.optimize phy config with independent file
Verify:
x301
Change-Id: I869cab8fc28fc9d323ca0365fc6eead1c6bc53d7
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Guosong Zhou [Wed, 2 Jan 2019 11:00:30 +0000 (06:00 -0500)]
camera: add dvp camera [1/1]
PD#OTT-1204
Problem:
don't support dvp camera
Solution:
add dvp camera gc2145 camera driver
Verify:
test pass on U200
Change-Id: I5927d49a93952587af7bb460a5c405293d692153
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Kaifu Hu [Wed, 2 Jan 2019 02:54:09 +0000 (10:54 +0800)]
hdmitx: disable spead spectrum when 4k mode [1/1]
PD#SWPL-3696
Problem:
Flash black screen when 4k mode
Solution:
Disable spead spectrum when 4k mode
Verify:
GXL/P215
Change-Id: I131633c26492548146cdc6e75a4d65b91cfd77ad
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Lei Qian [Wed, 2 Jan 2019 07:59:53 +0000 (15:59 +0800)]
dts: txlx: reserve 1M memory for codec mm [1/1]
PD#SWPL-2735
Problem:
codec will occupy the first 1M memory with unknown reason.
Solution:
reserve 1M memory for codec mm until the real reason is found.
Verify:
verify by einstein
Change-Id: Ic21bfa59e74d21ae8f6b4477470b9d719bebc595
Signed-off-by: Lei Qian <lei.qian@amlogic.com>
nengwen.chen [Fri, 21 Dec 2018 05:18:02 +0000 (13:18 +0800)]
atv_demod: modify atv demod code [1/1]
PD#SWPL-3469
Problem:
1.add mono audio only config.
2.fix offset -0.5M lose channel when scanning.
3.fix a2 audio mono mode detection threshold.
4.add audio detection when scanning.
5.Ver: V2.06.
Solution:
add mono audio only config
Verify:
verified by einstein
Change-Id: I774d7aa42ffbfcbec58b9b21f05368c5166331c8
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Tao Zeng [Wed, 2 Jan 2019 06:47:13 +0000 (14:47 +0800)]
mm: fix range mistake for virt_check [1/1]
PD#SWPL-3793
Problem:
Address 0xC0000000 is in lowmem, which should not be warned by
virt_check:d input of virt:
c0000000
~~~~~~~~
CPU: 1 PID: 5141 Comm: Binder:3297_5 Tainted: G O 4.9.113 #1
Hardware name: Generic DT based system
[<
c030e760>] (show_stack+0x20/0x24)
[<
c06ee8a8>] (dump_stack+0x90/0xac)
[<
c031c7b4>] (virt_check+0x64/0x68)
[<
c049c45c>] (__check_object_size+0x184/0x1f8)
[<
c07058c0>] (copy_page_to_iter+0x288/0x5b8)
[<
c04425dc>] (generic_file_read_iter+0x390/0xa48)
[<
c049f238>] (__vfs_read+0xec/0x13c)
[<
c04a00e0>] (vfs_read+0x9c/0x164)
[<
c05ce7e8>] (sdcardfs_read+0x28/0x50)
[<
c049f194>] (__vfs_read+0x48/0x13c)
[<
c04a00e0>] (vfs_read+0x9c/0x164)
[<
c04a13ac>] (SyS_read+0x5c/0xbc)
[<
c0308980>] (ret_fast_syscall+0x0/0x48)
Solution:
Not warning for 0xC0000000 if virt address is equal to it
Verify:
R311
Change-Id: I9a3f8efe89564f31f9a49ab4448323c93ddc761d
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Nan Li [Fri, 28 Dec 2018 10:07:27 +0000 (18:07 +0800)]
sdio: optimize 1bit mode cfg [1/1]
PD#SWPL-3719
Problem:
optimize sdio 1bit cfg fail for dts.
Solution:
move MMC_PM_KEEP_POWER setting from
amlsd_get_host_caps(). so modify dts to
set 1bit mode.
Verify:
p212
Change-Id: I268f25a9550058e7bbf3562eec53c8cd92b58b1b
Signed-off-by: Nan Li <nan.li@amlogic.com>
Hui Zhang [Sat, 22 Dec 2018 08:55:43 +0000 (16:55 +0800)]
codec_mm: not to be blocked to wait scatter cache done [1/2]
PD#SWPL-2206
Problem:
decoding thread was blocked to wait scatter memory to be cached done. it
may take 30+ ms and lead to cts/vts fail
Solution:
not to wait scatter cached done. it save timing of system
Verify:
Verified U212
Change-Id: I75fa3e892e0b9b8023c07b62a31ebd43d3c92044
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
nengwen.chen [Tue, 1 Jan 2019 09:55:48 +0000 (17:55 +0800)]
camera: all sources are displayed as black screen except DTV.
PD#SWPL-3776
Problem:
all sources are displayed as black screen except DTV
Solution:
Revert "camera: add dvp camera [1/1]"
Verify:
verify by x301
Change-Id: I3f094ed18de4be382798515e5c68eb5505df2373
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Shaochan Liu [Sat, 29 Dec 2018 06:57:40 +0000 (14:57 +0800)]
lcd: modify lcd/power show debug node [1/1]
PD#SWPL-1005
Problem:
modify lcd/power show debug node
Solution:
1,modify lcd/power node to show lcd power on/off
Verify:
verified by t962x_r311
Change-Id: Ic2b293ac14a3139b572a2e36ac101f9f54da2139
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
Lifeng Cao [Wed, 12 Dec 2018 03:22:07 +0000 (11:22 +0800)]
video: dv: Change omx pts upper and lower threshold for dv [3/3]
PD#SWPL-2465
Problem:
DV av-sync test diff between audio and video too big
Solution:
Change omx pts upper and lower threshold
Verify:
Test pass by S905X2-U212
Change-Id: I916773300b29a9b6368d7e2283effae2a6440d14
Signed-off-by: Lifeng Cao <lifeng.cao@amlogic.com>
Xing Wang [Thu, 27 Dec 2018 12:58:52 +0000 (20:58 +0800)]
audio: fix no sound when atv switch to other source [1/1]
PD#SWPL-3440
Problem:
ATV switch to other source, such as DTV/HDMI/AV, no sound
Solution:
ATV switch to other source, atv demond is disabled when
audio is reading data, so it's blocked.
In normal, ATV sends audio data to FRATV,
then FRATV sends data to audio fifo, then to DDR.
If ATV stops to send audio data, no interrupt from FRATV to fifo,
no data is updated to DDR.
When exit from audio atv patch, it's a block signal to
wait in_read finished, but ATV is disabled
TimeCheckThread will check any routine is blocked,
if there is one, signal SIGABRT would rise and cause audio server restart
So we make a delay before ATV is disabled to waiting audio data is readed.
Verify:
x301
Change-Id: I47dc88d2c8565c16c739ffea69a88152fa4d5f13
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Guosong Zhou [Sat, 29 Dec 2018 02:17:04 +0000 (21:17 -0500)]
camera: add dvp camera [1/1]
PD#OTT-1204
Problem:
don't support dvp camera
Solution:
add dvp camera gc2145 camera driver
Verify:
test pass on U200
Change-Id: I0451160d013cd15b32a11469926fe8be4c35c466
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Xing Wang [Wed, 5 Dec 2018 15:12:54 +0000 (23:12 +0800)]
audio: auge: add vad driver [1/1]
PD#SWPL-2404
Problem:
VAD for wake up
Solution:
Add vad driver to fetch VAD buffer and ALSA buffer, in userspace, they
will be combined for wakeup engine
Verify:
x301
Change-Id: I3b4de5fdfe173ce18e58a187a3adeda601e226b3
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Yao.Liu [Fri, 28 Dec 2018 12:38:21 +0000 (07:38 -0500)]
ion: add invalid cache function [1/1]
PD#SWPL-3736
Problem:
H265 encoder use ge2d to do format convert, ge2d dst
buffer is allocated from ion heap and is cached buffer.
The cache consistency problem caused encoded stream error.
Solution:
ION add invalid cache function, invalid cache before
CPU access cache buffer
Verify:
U212
Change-Id: Ib14f2a9ee5b536c3546c5957fd0505cacae45f80
Signed-off-by: Yao.Liu <yao.liu@amlogic.com>
Zhongfu Luo [Sat, 29 Dec 2018 05:12:08 +0000 (13:12 +0800)]
defendkey: change defendkey read function process [1/1]
PD#SWPL-3204
Problem:
GXL: need to fix bug for defendkey read function
Solution:
1.change defendkey read function process
Verify:
GXL skt board verify pass
Change-Id: I61c7e7074eefa1ab20bdb8fa31f970b39bfe5a1b
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Zhongfu Luo [Fri, 28 Dec 2018 08:16:28 +0000 (16:16 +0800)]
defendkey: change defendkey reserved memory process [1/1]
PD#SWPL-3706
Problem:
GXL: defenkey cause system crash
Solution:
1.change defendkey reserved memory process
2.limit reserved memory region
Verify:
GXL skt board verify pass
Change-Id: I23c6fe861803de96eccec9b643824eeae2c2e564
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Nanxin Qin [Wed, 26 Dec 2018 11:29:18 +0000 (19:29 +0800)]
codec_mm: add the flush cache away for the highmem [1/1]
PD#SWPL-3588
Problem:
bad using virt_to_pfn in stream_input ko
Solution:
add the flush cache away for the highmem.
Verify:
p212
Change-Id: I70fd18f97b5b91c9154b7eeb9f488d16113daf8d
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
Nian Jing [Tue, 25 Dec 2018 08:24:04 +0000 (16:24 +0800)]
tvafe: fix black border for atv [1/1]
PD#SWPL-3573
Problem:
appear black border after unplug/plug signal
Solution:
reset de when nosignal
restore acd hsync when signal unstable
Verify:
verified by x301
Change-Id: Ia9e2e9dfb326061bd3b9b6f9a02be0d935cdf06f
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Xing Wang [Wed, 26 Dec 2018 11:42:37 +0000 (19:42 +0800)]
audio: codec: fix to resume ad82584's volume after suspend [1/1]
PD#SWPL-3456
Problem:
1) After suspend, volume is not resume
2) ARC connected, still sound out from spk
Solution:
1) save channel volume when suspend, then resume the volume
2) add mute mixer control for ad82584
Verify:
x301
Change-Id: Ic6e7502e3f9689cc2d1053295f26aaf4d5be2603
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
rongrong zhou [Tue, 11 Dec 2018 07:42:46 +0000 (15:42 +0800)]
dts: add netflix MGKID unify key [3/3]
PD#SWPL-2847
Problem:
add netflix MGKID support
Solution:
add netflix MGKID support
Verify:
ampere NTS
Change-Id: I7bf7f7b7527a36dc7b50f1a98bdb5d0a60af8741
Signed-off-by: rongrong zhou <rongrong.zhou@amlogic.com>
Xuhua Zhang [Wed, 19 Dec 2018 03:32:30 +0000 (11:32 +0800)]
bt656: fix bt656 bugs [1/1]
PD#OTT-1022
Problem:
bt656 can not work well.
Solution:
1. add clock control
2. fix bt656 id bug
Verify:
G12A U200
Change-Id: I2aaecee33fd590497d5a11cf3618fc07264f02a5
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
Evoke Zhang [Thu, 27 Dec 2018 09:17:47 +0000 (17:17 +0800)]
lcd: update panel parameters for tl1 [1/1]
PD#SWPL-3109
Problem:
tl1 tcon parameters need update
Solution:
1.update tcon parameters for tl1
2.add minilvds support
Verify:
x301
Change-Id: Ia9c1defb25f43b2b352400e2ab55c6a74b55d688
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Jian Hu [Tue, 18 Dec 2018 09:07:20 +0000 (17:07 +0800)]
clk: g12a: add bt656 clock [1/1]
PD#SWPL-3359
Problem:
the bt656 clocks were missing
Solution:
1.add bt656 clocks
2.fix several errors for media clocks
Verify:
test passed on u200
Change-Id: Iff69e790c78335930d6b2ea54f7544aca464e1fb
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Hanjie Lin [Fri, 23 Nov 2018 07:14:28 +0000 (15:14 +0800)]
dts: fix g12b energy-cost config error [1/1]
PD#SWPL-1007
Problem:
g12b a53 core energy-cost config is error.
Solution:
modify with right cost value
Verify:
w400
Change-Id: I1ffba5b147879a4178f255247f338b594e440eed
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Pengcheng Chen [Mon, 24 Dec 2018 02:40:34 +0000 (10:40 +0800)]
osd: the border below has a green horizontal line [1/2]
PD#SWPL-3478
Problem:
the border below has a green horizontal line
Solution:
add freescale repeat last line, supported chip after G12B
Verify:
verify on T962X2-X301
Change-Id: I5dab91774eea3949062fe3254db7a074563fe1c4
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Brian Zhu [Wed, 26 Dec 2018 14:37:51 +0000 (22:37 +0800)]
vpp: set the preblend horz size correctly for hdr input [2/2]
PD#SWPL-3478
Problem:
the border below has a abnormal line
Solution:
Set the preblend horz size correct
Verify:
verify on T962X2-X301
Change-Id: Ie7b20a6b030d40d3a0eb3458df07e7632491aa2c
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Jianxin Pan [Thu, 27 Dec 2018 11:13:51 +0000 (03:13 -0800)]
Merge "backlight: pwm combo policy bug with level range [2/2]" into amlogic-4.9-dev
Xuhua Zhang [Fri, 21 Dec 2018 05:16:24 +0000 (13:16 +0800)]
tvin: vdin: fix afbce 576p color anomaly [1/1]
PD#SWPL-3424
Problem:
dvd play 576p media, tl1 display color anomaly
Solution:
encoder use same default color setting with decoder
Verify:
x301
Change-Id: I8954874ea048b2d9e9b7aa58c883da1f306c4459
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
Xuhua Zhang [Thu, 20 Dec 2018 12:16:06 +0000 (20:16 +0800)]
tvin: vdin: fix afbce 4k yuv444 display error [1/1]
PD#SWPL-3429
Problem:
vdin output format is afbce 4k yuv444,it display ghost shadow of image
Solution:
add afbce comb control
Verify:
x301
Change-Id: I168f13994a4929bd227ba70b006f259ac0726238
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
Zhongfu Luo [Thu, 27 Dec 2018 09:47:20 +0000 (17:47 +0800)]
defendkey: script signing tool: support upgrade check [5/5]
PD#SWPL-3204
Problem:
GXL/TXLX/G12A/G12B: script signing tool need to support defendkey
Solution:
1.change dtb decrypt process
Verify:
GXL/TXLX/G12A/G12B skt board verify pass
Change-Id: I165db827dec82837edb8a4a5197090bbd79d536d
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
Yi Zeng [Thu, 27 Dec 2018 06:43:36 +0000 (14:43 +0800)]
mtd: nand: support new slc nand [1/1]
PD#SWPL-3542
Problem:
2Gb SLC Nand ZDND2G08U3D-IA requested by Marketing
aka ZDND2GXXXXX module number
Solution:
add the nand id and MFR id into amlogic id table
adapt it's bad block identification
Verify:
AXG_S400
Change-Id: I6f0e2caf424e09c1f186beb42a146d92b675f161
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
Tao Zeng [Thu, 27 Dec 2018 06:31:29 +0000 (14:31 +0800)]
dmc: fix panic problem when show memory in highmem [1/1]
PD#SWPL-2767
Problem:
If DMC violation address is in highmem, then it will panic
when show memory using page_address();
Solution:
map violation address for highmem
Verify:
p212
Change-Id: Ib6213eaab42b129c8c0a381511a0b3376b0d3e66
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
yicheng shen [Thu, 20 Dec 2018 08:13:00 +0000 (03:13 -0500)]
hdmirx: update phy setting [1/1]
PD#SWPL-3512
Problem:
HDMIRX no sinal in some mainboard.
Solution:
1.fix phy pll lock bit unstable issue(foce lock);
2.modify phy bandwidth definition;
3.optimize tmds_valid judgement;
Verify:
TL1
Change-Id: Idea20a46c465b20687654f071b259ebf8a7fed4a
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Nan Li [Thu, 20 Dec 2018 09:21:24 +0000 (17:21 +0800)]
sdio: optimize data1 interrupt cfg reg error [1/1]
PD#SWPL-1908
Problem:
rtl 8822bs sdio wifi tx data crc when Online on demand.
Solution:
remove cfg reg invalid setting in enable_sdio
when data1 interrupt breaks.
Verify:
u212
Change-Id: I49e21a6d213d9c60e315d23bdf9937385b6d75e9
Signed-off-by: Nan Li <nan.li@amlogic.com>
Yi Zhou [Tue, 25 Dec 2018 09:08:39 +0000 (17:08 +0800)]
dv: fix the error setting in dv core [1/1]
PD#SWPL-3046
Problem:
movie player will keep video layer when playing video films.
Even if jumping to the next films, it will not close video layer.
When meeting this situation, dv core will keep the front
film's setting.
Solution:
when jumping the next film, we know the first frame.
So we clean the setting in the first frames.
Verify:
u212
Change-Id: I61ebc8f58baed32abc519018676e40b08d059cac
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Brian Zhu [Wed, 26 Dec 2018 10:55:36 +0000 (18:55 +0800)]
vpp: sr: disable core0 and core1 scaler latch [1/1]
PD#SWPL-3144
Problem:
The latch function cause the super scaler size asynchronous
Solution:
Disable sr core0 and core1 scaler latch
Verify:
T962x2 x301 board test pass
Change-Id: Iecbcc3e0c751093b6515f7b46973eca2157cd349
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Shaochan Liu [Thu, 6 Dec 2018 08:58:17 +0000 (16:58 +0800)]
backlight: add backlight pwm debug node for tvapi [1/1]
PD#SWPL-3110
Problem:
add backlight pwm debug node for tvapi
Solution:
1,change pwm node for pwm main parameters(duty, freq, pol)
2,add pwm_info node to display all pwm state
Verify:
verified by t962x_r311
Change-Id: Ibd9575412ca9704a0002073679d19c5426c1838c
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
Evoke Zhang [Fri, 21 Dec 2018 03:41:54 +0000 (11:41 +0800)]
backlight: ldim_global demo can't power on [1/1]
PD#SWPL-3293
Problem:
select UHD_2RG_LDIM model_name,
then the backlight can't power on.
Solution:
fix ldim dev_drv add mistake
Verify:
r311
Change-Id: I7f86d6072524a2a6399a8259dae8c27a89a79b85
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Zongdong Jiao [Tue, 20 Nov 2018 04:37:30 +0000 (12:37 +0800)]
hdmitx: add rx latency info [1/4]
PD#SWPL-2456
Problem:
Lack the latency info of RX
Solution:
Add the latency info of RX
Verify:
T962E/R321
Change-Id: I480398466753dd93ca6e908d39157acadff6879f
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Xingyu Chen [Wed, 26 Dec 2018 02:47:13 +0000 (10:47 +0800)]
arm64: dts: remove alloc-ranges property in cma nodes for tl1 [1/1]
PD#SWPL-3437
Problem:
the cam regions that specified by the alloc-ranges property are scattered,
it is not convenient to debug the memory issues.
Solution:
remove alloc-ranges property in cam nodes, but secmon and fb. the system
will allocate the cma region automatically that more gathered.
Verify:
test pass on x301
Change-Id: Ibbe64b48843c1295110242c17d7691284f08a66b
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Dianzhong Huo [Tue, 25 Dec 2018 08:23:56 +0000 (16:23 +0800)]
dts: add w411 dts for buildroot [1/1]
PD#SH-224
Problem:
buildroot no w411 dts
Solution:
1.add w411 dts
2.w411 dts copy form w400_buildtoot dts, and do some memory cost down,
and also sdio port has some different with w400 board
Verify:
w411 board test pass
Change-Id: Iba3de4fc4fe1d37dbb6070dbe54ad35c9caf45d9
Signed-off-by: Dianzhong Huo <dianzhong.huo@amlogic.com>
Shaochan Liu [Fri, 21 Dec 2018 10:48:07 +0000 (18:48 +0800)]
backlight: pwm combo policy bug with level range [2/2]
PD#TV-1488
Problem:
when only use one pwm, pwm combo policy has a bug with
level range
Solution:
modify level range check demo when set bl level
Verify:
verify by T962X2-X301
Change-Id: Ia5a0b12fa96f0f77ed85f6f70ed796203ea32a20
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
yujie.wu [Wed, 19 Dec 2018 02:39:25 +0000 (10:39 +0800)]
audio: Fix TDM not wokring on HDMI I2S in [1/1]
PD#SWPL-2887
Problem:
When TDM is used for HDMI I2S in, the solt set is wrong.
Solution:
Fix the lane max value from 3 to 4
Verify:
A113
Change-Id: I33f5ca21bf1e2407d83fa5d0f22e21f7b1f5e749
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
Nian Jing [Wed, 19 Dec 2018 12:45:46 +0000 (20:45 +0800)]
tvafe: fix av pal flash issue on some devices [1/1]
PD#SWPL-2636
Problem:
Picture flash when av connect some dvd or mbox
Solution:
Modify the vafe ctrl config
Verify:
verified by x301
Change-Id: Ie6ae659f3f59d7daba680e2bb32112031232c956
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Tao Zeng [Tue, 25 Dec 2018 09:43:02 +0000 (17:43 +0800)]
mm: fix too many wrong kasan report [1/1]
PD#SWPL-3583
Problem:
After merge change:
http://scgit.amlogic.com:8080/#/c/55018/
Too many wrong kasan report occur when booting kernel
Solution:
Fix kasan poison address range when free wasted memory.
Verify:
P212
Change-Id: I576a7edb7b4e70f9c6c782639f433ad45bafba1d
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Xingyu Chen [Tue, 25 Dec 2018 08:10:30 +0000 (16:10 +0800)]
arm64: add tl1 support [1/1]
PD#SWPL-3437
Problem:
the arm64 does not support tl1
Solution:
add arm64 support for tl1
Verify:
test pass on x301
Change-Id: I9531731650c7e8e962f681e357580d3dd0eb0137
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Yong Qin [Wed, 19 Dec 2018 06:56:40 +0000 (14:56 +0800)]
vlock: vlock for tl1 [1/1]
PD#SWPL-3129
Problem:
1.verify manual pll mode
2.modify vlock hiu register access api
3.add a new fsm for tl1 test
4.add chip match data
Solution:
add function for tl1
Verify:
verified on tl1
Change-Id: I75f8d2a40437056135f8dd0fb241016a9ea680df
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Yeping Miao [Fri, 7 Dec 2018 00:56:57 +0000 (08:56 +0800)]
dts: Add two dts files for S410 [3/3]
PD#SWPL-2887
Problem:
adapt Soundbar solution to S410 platform
Solution:
These two dts files are changed from S400.
Change the audio related like following.
hw:0,0 is for LINE in
hw:0,1 is for HDMI i2s in
hw:0,2 is for speaker out (4 i2s)
Verify:
S410 A113D
Change-Id: I09fff371e511432f363e2ec8999b584af533ff9c
Signed-off-by: Yeping Miao <yeping.miao@amlogic.com>
Tao Zeng [Tue, 25 Dec 2018 11:17:25 +0000 (19:17 +0800)]
mm: check virt_to_xxxx macro on 32bit OS [1/1]
PD#SWPL-1909
Problem:
virt_to_page may get bad input with virtual address
in high mem.
Solution:
Check input address of this macro and get a warn print
Verify:
p212
Change-Id: I69d81f7aac43f1865d3d1112263276603de166ce
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Shaochan Liu [Tue, 18 Dec 2018 03:31:35 +0000 (11:31 +0800)]
lcd: add lcd resume alarm filter function [1/1]
PD#SWPL-3362
Problem:
add lcd resume alarm filter function
Solution:
add lcd resume alarm filter function
Verify:
verified by t962x_r311
Change-Id: Ia4c219c76d253b4ecc16784193dc06a164d7a217
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
Shaochan Liu [Mon, 17 Dec 2018 12:07:54 +0000 (20:07 +0800)]
backlight: add backlight brightness debug function [2/2]
PD#SWPL-1005
Problem:
add backlight brightness debug function
Solution:
1,add brightness_level node to change backlight brightness
2,add brightness_bypass node to change brightness_bypass
Verify:
verified by t962x_r311
Change-Id: I8faae0d08b2a15fdc5c5a507c0c6815843be59ab
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
Qianggui Song [Mon, 24 Dec 2018 05:35:17 +0000 (13:35 +0800)]
ir: add toshiba protocol support [1/1]
PD#SWPL-3543
Problem:
current driver does not support toshiba ir remote control protocol
Solution:
add register setting and decode code for toshiba protocol
use REMOTE_TYPE_TOSHIBA/REMOTE_TYPE_NEC_TOSHIBA to configure toshiba
only/toshiba and nec.
Verify:
tl1_t962x2_x301
Change-Id: Idad70c3879fad6e8267f0c4d80d2447c34114103
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Shaochan Liu [Thu, 6 Dec 2018 08:58:17 +0000 (16:58 +0800)]
lcd: add lcd/power debug node [1/2]
PD#SWPL-1005
Problem:
add lcd/power debug node
Solution:
1,add lcd/power node to control lcd power on/off sequence
2,change old lcd/power to lcd/power_step
Verify:
verified by t962x_r311
Change-Id: I0b10caa4cbd8f7ce489f3ceef7780dba2e0b00dc
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
Tao Zeng [Tue, 25 Dec 2018 08:55:09 +0000 (16:55 +0800)]
dts: change CMA layout [1/1]
PD#SWPL-1909
Problem:
On 32bit kernel, codec cma is located in normal zone by
"alloc-ranges" parameter with large size. This takse up
memory space for kernel and drivers. Sometimes we can see
memory allocation fail log but there are still enought
free pages. But most of these pages are CMA pages.
Solution:
Move codec cma location to high memzone. On 32bit, low
768MB memory is normal zone.
This change also correct first 1MB memory lost problem
for chips later than TXLX
Verify:
TL1 x301/x309/socket board
Change-Id: I2fc62ae8b03143cc91bfecc62c123d1925aac482
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Huan Biao [Thu, 20 Dec 2018 09:42:24 +0000 (17:42 +0800)]
thermal: cooldev: fix cpucore cool devices driver issue [1/1]
PD#SWPL-3334
Problem:
cpucore cool devices upper date type no match
cpucore num set error
Solution:
modify cpucore upper num check
Verify:
w400 pass
Change-Id: I83f829d31cab565d5ca3b892bb58a4a68b8f0f20
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Zongdong Jiao [Thu, 13 Sep 2018 02:17:34 +0000 (10:17 +0800)]
hdmitx: fix KASAN Bug in set_disp_mode_auto [1/1]
PD#173549: hdmitx: fix KASAN Bug in set_disp_mode_auto
==================================================================
BUG: KASAN: global-out-of-bounds in set_disp_mode_auto+0x244/0x870
Read of size 32 at addr
ffffff900a67e4c0 by task power@1.0-servi/2924
CPU: 2 PID: 2924 Comm: power@1.0-servi Tainted: G B O 4.9.113 #1
Hardware name: Amlogic (DT)
Call trace:
[<
ffffff900908ecc0>] dump_backtrace+0x0/0x368
[<
ffffff900908f0cc>] show_stack+0x24/0x30
[<
ffffff900963bdb0>] dump_stack+0xa0/0xc8
[<
ffffff90092ba234>] print_address_description+0x144/0x258
[<
ffffff90092ba6ac>] kasan_report+0x264/0x338
[<
ffffff90092b8ff4>] check_memory_region+0x12c/0x1c0
[<
ffffff90092b90dc>] __asan_loadN+0x14/0x20
[<
ffffff9009c12804>] set_disp_mode_auto+0x244/0x870
[<
ffffff9009c13994>] hdmitx_late_resume+0x1cc/0x288
[<
ffffff9009da5f30>] early_suspend_trigger_store+0x1a8/0x1d0
[<
ffffff9009640ac4>] kobj_attr_store+0x44/0x60
[<
ffffff90093973b0>] sysfs_kf_write+0x98/0xb8
[<
ffffff9009396134>] kernfs_fop_write+0x12c/0x270
[<
ffffff90092c9888>] __vfs_write+0xd8/0x268
[<
ffffff90092cae48>] vfs_write+0xd8/0x240
[<
ffffff90092ccd8c>] SyS_write+0xc4/0x148
[<
ffffff9009083f00>] el0_svc_naked+0x34/0x38
The buggy address belongs to the variable:
all_fmt_paras+0x1460/0x14a0
Memory state around the buggy address:
ffffff900a67e380: 00 07 fa fa fa fa fa fa 00 02 fa fa fa fa fa fa
ffffff900a67e400: 00 07 fa fa fa fa fa fa 00 02 fa fa fa fa fa fa
>
ffffff900a67e480: 00 07 fa fa fa fa fa fa 00 02 fa fa fa fa fa fa
^
ffffff900a67e500: 00 07 fa fa fa fa fa fa 00 03 fa fa fa fa fa fa
ffffff900a67e580: 00 04 fa fa fa fa fa fa 00 04 fa fa fa fa fa fa
==================================================================
Change-Id: Ie2435c031c04ac23e801cfefa80a29071c120b4f
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Yong Qin [Tue, 25 Dec 2018 03:03:01 +0000 (11:03 +0800)]
di: disable afbc on tl1 [1/1]
PD#SWPL-3413
Problem:
when playing SD/HD/VP9/H265 video, there
are 3 veritcal lines on the picture.
Solution:
disable afbc
Verify:
verified on tl1
Change-Id: I839d8f26aefdf2c71272d8d3e7bf93e4c3294491
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Jiacheng Mei [Mon, 24 Dec 2018 03:00:08 +0000 (11:00 +0800)]
amlvideo2: reduce vfq size to avoid mem out-of-bounds [1/1]
PD#SWPL-3355
Problem:
vfq size large than kmalloc mem
Solution:
reduce vfq size to kmalloc mem size
Verify:
T962X-R311
Change-Id: Ibbc0c0219d6f170b4169d76e57419cdeb354f7fe
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
Bencheng Jing [Thu, 20 Dec 2018 06:52:26 +0000 (14:52 +0800)]
amvecm: malloc local contrast to enable lc function [1/1]
PD#SWPL-3419
Problem:
enable local contrast function
Solution:
enable local contrast function
Verify:
x301
Change-Id: I6a1daa7c82224956614b4da46078efdd66424b82
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Rongjun Chen [Thu, 29 Nov 2018 10:40:14 +0000 (18:40 +0800)]
wifi: change mem size to support multi wifi [2/2]
PD#SWPL-2210
Problem:
multi wifi not support
Solution:
add multi wifi support
Verify:
ampere
Change-Id: Iea32268fd081a71a1ade00e56a2dcecd975da849
Signed-off-by: Rongjun Chen <rongjun.chen@amlogic.com>
Hong Guo [Thu, 20 Dec 2018 09:27:35 +0000 (17:27 +0800)]
arm: vrtc: add rtc function for tl1. [1/1]
PD#SWPL-3315
Problem:
can't wakeup after setting timer expire.
Solution:
add rtc funciton for tl1.
Verify:
tl1_x301, verify pass
Change-Id: I2b8e77cb90cacdde728586f873d10e5fbe52f76c
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Zhongfu Luo [Thu, 13 Dec 2018 09:57:20 +0000 (17:57 +0800)]
dts: TXL: defendkey: modify reserve memory mode [2/2]
PD#SWPL-2343
Problem:
TXL need to modify reserve memory mode
Solution:
remove defendkey reserved memory in TXL dts
Verify:
TXL skt board verify pass
Change-Id: I1d036d7f0e2cf713cb093e5f2a01e69603264664
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
nengwen.chen [Fri, 7 Dec 2018 13:41:43 +0000 (21:41 +0800)]
atv_demod: atv demod code optimization for audio [1/1]
PD#TV-1448
Problem:
1.atv demod code optimization for audio
2.amlogic-4.9-dev
Solution:
atv demod code optimization for audio
Verify:
verified by einstein
Change-Id: Ic1c6a26ef97fbaf288ae37f2761c0df83ec7cf1e
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Jihong Sui [Tue, 18 Dec 2018 13:56:38 +0000 (21:56 +0800)]
deinterlace: pq: adjust pulldown setting for tl1 [1/1]
PD#SWPL-3182
Problem:
1.VLSI(Feijun) fine-tune pulldown setting for TL1, G12A/B;
2.fine tune combing_glbmot_radprat by VLSI(yanling.liu);
Solution:
finetune setting.
Verify:
tl1
Change-Id: Ie65cec8b216752600dfd54ee6be5302150282774
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jihong Sui [Wed, 12 Dec 2018 09:02:09 +0000 (17:02 +0800)]
deinterlace: pq: add scene change detection for tl1 [1/1]
PD#TV-1361
Problem:
Add scene change detection for DM (read part),
start from TL1 by VLSI(Zheng.Bao).
Solution:
1. add control in function noise_meter_process;
2. add debug information:
cat /sys/class/deinterlace/di0/nr4_param
3. set NR2_CUE_MODE[11:10] as 3; (by feijun)
Verify:
tl1
Change-Id: Ib34d1b403539ba5fe5135d6608bfa2cf27490826
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Huan Biao [Tue, 18 Dec 2018 03:13:58 +0000 (11:13 +0800)]
arm: dts: tl1: optimize ipa parameter [1/1]
PD#SWPL-3334
Problem:
tl1 ipa coeff and power data no match test data
Solution:
tl1 ipa coeff and power data update for match chip test data
Verify:
x301 pass
Change-Id: I8005140a4ef0b87998f2f637d604db85e58e7316
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
Hanjie Lin [Tue, 18 Dec 2018 11:21:12 +0000 (19:21 +0800)]
sched: EAS: sched_energy for arm on g12b [1/1]
PD#SWPL-3316
Problem:
g12b/w400 has not sched-energy config in arm for EAS.
Solution:
port from arm64
Verify:
w400
Change-Id: I4f3ddd9d5f2abb9787ab95d6652db6cea1c54b24
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Ting Li [Fri, 30 Nov 2018 02:33:36 +0000 (10:33 +0800)]
picdec: add dts config for tl1_t962x2_x301 [1/1]
PD#SWPL-2656
Problem:
cannot play picture
Solution:
add dts config for tl1_t962x2_x301
Verify:
verify by tl1_t962x2_x301
Change-Id: I02265b33e0f2eaffc5741371ae45579effc8df47
Signed-off-by: Ting Li <ting.li@amlogic.com>
Jian Xu [Wed, 19 Dec 2018 14:07:07 +0000 (22:07 +0800)]
udio: auge: tl1 acodec mapping to data 1 [1/2]
PD#SWPL-3277
Problem:
tl1 internal codec volume can by adjusted
Solution:
configure the acodec data layout mapping
to a fixed volume
Verify:
x301
Change-Id: I14d3762b39a0a5291722ef5489026f10fc960120
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
qingwei.xu [Mon, 17 Dec 2018 09:04:57 +0000 (17:04 +0800)]
dts: Optimize ion memory to 36MB for Android P 720P Project [1/1]
PD#SWPL-3324
Problem:
Ion's memory configuration is unreasonable for Android P 720P Project
, resulting in waste.
Solution:
More reasonable memory size configuration,Optimize ion memory to 36MB
for Android P 720P Project
Verify:
Verify by Android P 720P Project
Change-Id: Ibf13989f91c1cce5e030d900de2a30b0a16f7994
Signed-off-by: qingwei.xu <qingwei.xu@amlogic.com>