Jaska Uimonen [Mon, 4 Mar 2013 07:24:37 +0000 (09:24 +0200)]
fix draining not to lose samples in pre buffer
Jaska Uimonen [Wed, 5 Dec 2012 07:53:12 +0000 (09:53 +0200)]
node-manager: adding node support for pactl
Jaska Uimonen [Tue, 4 Dec 2012 07:53:14 +0000 (09:53 +0200)]
node manager: adding external node manager API
Jaska Uimonen [Thu, 11 Oct 2012 07:09:15 +0000 (10:09 +0300)]
add Samsung policy module - Samsung
Jaska Uimonen [Wed, 10 Oct 2012 11:08:57 +0000 (14:08 +0300)]
add support for PMAPI - Samsung
Jaska Uimonen [Mon, 8 Oct 2012 13:04:20 +0000 (16:04 +0300)]
add support for dlog - Samsung
Jaska Uimonen [Thu, 18 Oct 2012 13:46:05 +0000 (16:46 +0300)]
changes to simple API - Samsung
Janos Kovacs [Thu, 16 Aug 2012 00:47:48 +0000 (03:47 +0300)]
make pa_thread_mq_done() safe for subsequent calls
Jaska Uimonen [Sun, 10 Jun 2012 12:13:11 +0000 (15:13 +0300)]
jack detection fix for wired headset
Jaska Uimonen [Tue, 5 Jun 2012 08:36:13 +0000 (11:36 +0300)]
build-sys: install files for a module development.
Jaska Uimonen [Wed, 8 Aug 2012 08:14:39 +0000 (11:14 +0300)]
volume ramp: add volume ramping to sink
Jaska Uimonen [Wed, 8 Aug 2012 08:14:38 +0000 (11:14 +0300)]
volume ramp: adding volume ramping to sink-input
Jaska Uimonen [Wed, 8 Aug 2012 08:14:37 +0000 (11:14 +0300)]
volume ramp: additions to the low level infra
Tanu Kaskinen [Mon, 4 Jun 2012 14:44:20 +0000 (17:44 +0300)]
device-port: Create the profiles hashmap at initialization.
I doesn't make sense to require all callers of
pa_device_port_new() to create the hashmap themselves. There
are and there will be no cases where a port without any
profiles would be desired.
Mikel Astiz [Thu, 20 Sep 2012 12:28:34 +0000 (14:28 +0200)]
loopback: Disable adjust timer when suspended
Stop the rate adjustment timer when no audio is flowing.
Frédéric Dalleau [Thu, 20 Sep 2012 12:28:33 +0000 (14:28 +0200)]
loopback: Cork source-output if sink is suspended
During initialization, the approach avoids having a needless short
period of corked state in case the sink is suspended, by always creating
the source-output corked and uncorking it immediately afterwards when
the sink is not suspended.
Frédéric Dalleau [Thu, 20 Sep 2012 12:28:32 +0000 (14:28 +0200)]
loopback: Cork sink-input if source is suspended
During initialization, the approach avoids having a needless short
period of corked state in case the source is suspended, by always
creating the sink-input corked and uncorking it immediately afterwards
when the source is not suspended.
Frédéric Dalleau [Wed, 20 Jun 2012 15:33:35 +0000 (17:33 +0200)]
loopback: Enable routing on loopback streams
At module-loopback load, if no sink is given, the default sink is used. If the
stream has a media.role property, the property cannot be used because a the
source or sink is forced to default. Both module-intended-roles and
module-device-manager are affected. The same apply to sources.
With this patch, if sink or source is missing, routing modules can be used.
Luiz Augusto von Dentz [Mon, 13 Aug 2012 08:31:50 +0000 (11:31 +0300)]
bluetooth: Set initial profile priority based on profile state
This means only profiles on PA_BT_AUDIO_STATE_PLAYING state will have
bigger priority than 'Off'.
Mikel Astiz [Fri, 31 Aug 2012 10:51:08 +0000 (12:51 +0200)]
bluetooth: Do not switch to HFGW automatically
Card profile hfgw should be no different from the rest, and thus no
internal policy inside module-bluetooth-device should decide to switch
to its profile automatically.
This should be handled by policy modules.
Mikel Astiz [Fri, 31 Aug 2012 10:51:07 +0000 (12:51 +0200)]
bluetooth: Release transport when not available
Handle the Playing->Connected transition gracefully by releasing the
transport and setting the sink and sources as suspended. This is
necessary since the IO thread might not encounter a HUP always.
Mikel Astiz [Fri, 31 Aug 2012 10:51:06 +0000 (12:51 +0200)]
bluetooth: Acquire transport when becomes available
Try to acquire the transport as soon as the audio stream is started,
along with the availability flag update.
Mikel Astiz [Fri, 31 Aug 2012 10:51:02 +0000 (12:51 +0200)]
bluetooth: Support port availability flag
Use the port availability flag to expose whether a certain profile is
connected and whether it's doing actual audio streaming.
The proposed mapping is the following:
- Profile disconnected: port is unavailable
- Profile is connected (but not streaming/playing): availability unknown
- Profile is streaming/playing: port is available
The availability-unknown is specially interesting: it involves that if
the sink/source exists (corresponding card profile set), it is currently
in suspended state.
For example, for SCO cases (HFGW or HSP), this means the SCO is down. A
policy module would typically not change this, unless someone is really
trying to use the sink/source. This situation would be nicely handled by
module-suspend-on-idle, which would automatically connect SCO.
On the other hand, if the user wants to control the status of the SCO,
it will still be possible by resuming the sink or source (suspend=0).
This works out-of-the-box since most UIs would show to the user ports
whose availability is unknown.
Mikel Astiz [Fri, 31 Aug 2012 10:51:03 +0000 (12:51 +0200)]
bluetooth: Config MTU transport after acquire
The configuration of the transport that depends on the MTU should be
performed every time the transport has been acquired, since the
parameters depend on what the Media API provides. This requires to
update the parameters of the sinks and sources as well.
This patch moves this code into a new function that will be called
when the stream is starting (setup_stream), from the IO thread.
This makes the code more robust, since the existing multiple calls to
bt_transport_acquire() do not rely on setup_bt() being able to acquire
the transport.
Mikel Astiz [Fri, 31 Aug 2012 10:51:01 +0000 (12:51 +0200)]
bluetooth: Provide dummy set_port callbacks
There should be one port per sink/source so a dummy set_port callback
will be enough.
Adding this callback avoid the "operation not implemented" error
message and additionally makes the module work nicely with
module-switch-on-port-available.
Mikel Astiz [Fri, 31 Aug 2012 10:51:00 +0000 (12:51 +0200)]
sink, source: Support creating suspended sinks and sources
The initial state of a sink or source might not necessarily be IDLE,
because sometimes it might be suspended from the very beginning.
Mikel Astiz [Fri, 31 Aug 2012 10:50:59 +0000 (12:50 +0200)]
bluetooth: Fix check if transport exists before acquire
The transport might have disapeared exactly before acquiring, so we
should avoid an assertion failure, in this case inside the function
pa_bluetooth_discovery_get_by_path().
Mikel Astiz [Fri, 31 Aug 2012 10:50:57 +0000 (12:50 +0200)]
bluetooth: Fix wrongly set "phone" role for HFGW
The HFGW source should be consistent with the sink by not setting the
"phone" intended role.
Even though setting this role seems to make sense strictly speaking, the
rest of the codebase doesn't handle this well. Therefore, the audio
coming from a Bluetooth phone can be routed back to the same device.
Mikel Astiz [Fri, 31 Aug 2012 10:50:55 +0000 (12:50 +0200)]
bluetooth: Refactor code to helper function
Make code more readable by introducing the helper function
bt_transport_is_acquired(). This also adds assertions to check whether
the internal state is consistent.
Mikel Astiz [Fri, 31 Aug 2012 10:50:56 +0000 (12:50 +0200)]
bluetooth: Refactor parsing of signal PropertyChanged
Wrap the code parsing the PropertyChanged signal into a helper function
that will return the new state of the interface.
Mikel Astiz [Fri, 31 Aug 2012 10:50:54 +0000 (12:50 +0200)]
bluetooth: Remove return value of setup_stream()
The function setup_stream() never fails so the code can be simplified by
just removing the return value.
Mikel Astiz [Fri, 31 Aug 2012 10:50:53 +0000 (12:50 +0200)]
bluetooth: Remove return value of bt_transport_config()
The function bt_transport_config() never fails so the code can be
simplified by just removing the return value.
Tanu Kaskinen [Thu, 6 Sep 2012 12:47:17 +0000 (15:47 +0300)]
bluetooth: Remove commented out code.
Luiz Augusto von Dentz [Fri, 17 Aug 2012 14:21:52 +0000 (17:21 +0300)]
bluetooth: Don't force any profile on discovery module
Let device module figure out the priority based on the state of the
profiles.
Note that most likely all profiles will be in PA_BT_AUDIO_STATE_CONNECTED
state so 'Off' will be the initial profile then it is up to the policy
module to switch to the most suitable profile.
Mikel Astiz [Wed, 22 Aug 2012 07:04:19 +0000 (09:04 +0200)]
bluetooth: Fix bluetooth.protocol property
Property bluetooth.protocol did make a distinction between A2DP sink and
source roles but on the contrary did not separate HFP roles (headset vs
gateway). For consistency, they should both behave similarly.
This automatically fixes another incosistency: the HFGW (or HSP) sink
was set to bluetooth.protocol="sco", while the source was set to "hsp".
There is no use for this distinction, since the protocol (including the
role) is the same.
Mikel Astiz [Thu, 16 Aug 2012 11:08:29 +0000 (13:08 +0200)]
bluetooth: Fix missing state checks for a2dp_source
Profile a2dp_source, just like any other card profile, should have
state guards when the profile is being changed. If the BlueZ interface
is not connected, the profile should be set to "off".
Mikel Astiz [Thu, 16 Aug 2012 11:08:28 +0000 (13:08 +0200)]
bluetooth: Minor style fix
Else clause should be in the same line as the closing brace.
Mikel Astiz [Thu, 26 Jul 2012 10:36:33 +0000 (12:36 +0200)]
bluetooth: Remove minor unnecessary check
The return value of dbus_message_iter_next() doesn't need to be checked
since the while condition will be false anyway (arg type will be
DBUS_TYPE_INVALID).
Mikel Astiz [Thu, 26 Jul 2012 10:36:32 +0000 (12:36 +0200)]
bluetooth: Replace deprecated ListDevices()
The method ListDevices() in org.bluez.Adapter was deprecated in BlueZ
4.61, and is going to be removed in future releases. Instead, a property
was introduced for this purpose in BlueZ 4.7.
Mikel Astiz [Thu, 26 Jul 2012 10:36:31 +0000 (12:36 +0200)]
bluetooth: Replace deprecated ListAdapters()
The method ListAdapters() in org.bluez.Manager was deprecated in BlueZ
4.61, and is going to be removed in future releases. Instead, a property
was introduced for this purpose in BlueZ 4.22.
Mikel Astiz [Fri, 27 Jul 2012 14:41:22 +0000 (16:41 +0200)]
bluetooth: Avoid duplicating profile argument twice
The module module-bluetooth-device should never be given parameter
'profile' twice, even if both HFGW and A2DP are playing. This patch
proposed to consider HFGW first.
Mikel Astiz [Fri, 27 Jul 2012 14:41:21 +0000 (16:41 +0200)]
bluetooth: Consider different input and output MTU
Previous implementation assumes these values are equal, but this doesn't
necessarily have to be so.
Mikel Astiz [Fri, 27 Jul 2012 14:41:20 +0000 (16:41 +0200)]
bluetooth: Minor style fixes
Fix some minor style fixes to be consistent with the project coding
style.
Mikel Astiz [Wed, 25 Jul 2012 14:29:52 +0000 (16:29 +0200)]
bluetooth: Refactor property parsing code
Use a separate method to perform the common checks when a property needs
to be parsed.
Mikel Astiz [Fri, 6 Jul 2012 09:19:52 +0000 (11:19 +0200)]
bluetooth: Don't use the old socket IPC mechanism with BlueZ
This simplifies the code a lot, in favour of the D-Bus Media interface
in BlueZ. The old socket-based IPC mechanism has been deprecated and is
about to be removed soon.
Frédéric Danis [Tue, 12 Jun 2012 13:49:50 +0000 (15:49 +0200)]
bluetooth: Fix bluetooth.nrec property not updated
PropertyChanged signal of org.BlueZ.MediaTransport is processed in
pa_bluetooth_transport_parse_property() which updates t->nrec.
This is called by :
- First by filter_cb() of bluetooth-util.c
- Then by filter_cb() of module-bluetooth-device.c which retrieve value
of t->nrec before calling parse function, then it checks if t->nrec
has changed before updating bluetooth.nrec property.
As t->nrec has alreday been changed during first process, property
update is never performed.
This patch creates a new hook in pa_bluetooth_transport called
PA_BLUETOOTH_TRANSPORT_HOOK_NREC_CHANGED.
The hook is fired by bluetooth-util.c when the transport's NREC
property changes.
module-bluetooth-device.c won't listen the PropertyChanged signal of
MediaTransport anymore. Instead, it will use the hook in
pa_bluetooth_transport to get a notification when the NREC property
changes, and update the sink or source proplist accordingly.
const qualifier for returned pointer of
pa_bluetooth_discovery_get_transport() is removed.
Arti Trivedi Bora [Tue, 5 Jun 2012 19:58:13 +0000 (01:28 +0530)]
modules: Use pa_streq instead of strcmp.
poljar [Mon, 4 Jun 2012 17:35:41 +0000 (19:35 +0200)]
bluetooth: Add ports to the bluetooth sink/source
The bluetooth device should have ports so we can attach a latency to
the ports.
Every profile (a2dp, hsp...) has his own set of ports depending on the
number of sinks and sources it provides.
Arun Raghavan [Thu, 19 Jul 2012 11:25:03 +0000 (16:55 +0530)]
build: Fix distcheck failure on libwebrtc-util
Without -avoid-version, libtool creates a libwebrtc-util.so.0 and
libwebrtc-util.so.0.0.0 which are not cleaned up by make uninstall,
which in turn causes make distcheck to fail.
Arun Raghavan [Wed, 18 Jul 2012 06:53:17 +0000 (12:23 +0530)]
build: Bump soname
Arun Raghavan [Tue, 17 Jul 2012 07:38:20 +0000 (13:08 +0530)]
build: Avoid libstdc++ dep for module-echo-cancel if possible
This moves out the webrtc bits into a small helper library to shield the
rest of module-echo-cancel from being linked with a C++ linker. This is
required because automake will _always_ link module-echo-cancel in C++
mode if any of its deps (even conditional ones) are in C++.
David Henningsson [Tue, 3 Jul 2012 08:31:30 +0000 (10:31 +0200)]
alsa-mixer: Add "Front Headphone Jack" (fixup)
I forgot half of the front headphone patch, i e, to hide the
speaker output when the front headphone is connected. Thanks to
Shih-Yuan Lee for noticing.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Conflicts:
src/modules/alsa/mixer/paths/analog-output-speaker.conf
David Henningsson [Mon, 2 Jul 2012 10:09:06 +0000 (12:09 +0200)]
alsa-mixer: Add "Front Headphone" jack
Many desktops have headphone on the front and line outs on the back.
Sometimes this means that the headphone is labelled "Front Headphone Jack",
but the volume controls are only "Headphone Playback Volume", i e,
without the "Front" prefix.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Thu, 28 Jun 2012 13:40:17 +0000 (15:40 +0200)]
alsa-mixer: Always turn "Inverted Internal Mic" off
Some devices have inverted right channel, so when you add left and right,
the result is silence, or very faint sound. In recent kernels (3.5,
perhaps also 3.4) these are starting to be marked with a special
"Inverted Internal Mic" capture switch.
While we might want to add some reverse summing mechanism in the
future, for now, we just turn the thing off to avoid the problem of
recording silence.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Thu, 3 May 2012 13:39:18 +0000 (15:39 +0200)]
alsa-mixer: Add special profiles for some laptops missing speaker and/or internal mic
Several laptops have speaker ports, and/or internal mic ports, but we have
no way of detecting that. So we make the port(s) always show up for these
devices.
BugLink: https://bugs.launchpad.net/bugs/946232
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Arun Raghavan [Tue, 3 Jul 2012 12:41:54 +0000 (18:11 +0530)]
role-cork: Fix another minor leak
Credit to David for finding this one.
Arun Raghavan [Tue, 3 Jul 2012 12:22:36 +0000 (17:52 +0530)]
role-cork: Fix incorrect check at deinitialisation time
Arun Raghavan [Wed, 13 Jun 2012 10:59:35 +0000 (16:29 +0530)]
role-cork: Fix a minor leak
Deng Zhengrong [Sat, 23 Jun 2012 11:16:26 +0000 (19:16 +0800)]
xen: add the HAVE_CONFIG_H macro guard
Eero Nurkkala [Thu, 31 May 2012 07:44:23 +0000 (10:44 +0300)]
alsa-source: add missing header 'signal.h'
Compilation with -DDEBUG_TIMING fails due to a missing header:
modules/alsa/alsa-source.c: In function 'check_left_to_record':
modules/alsa/alsa-source.c:426:9: warning: implicit declaration of function 'raise' [-Wimplicit-function-declaration]
modules/alsa/alsa-source.c:426:9: error: 'SIGTRAP' undeclared (first use in this function)
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Eero Nurkkala [Thu, 31 May 2012 07:44:22 +0000 (10:44 +0300)]
alsa-sink: add missing header 'signal.h'
Compilation with -DDEBUG_TIMING fails due to a missing header:
modules/alsa/alsa-sink.c: In function 'check_left_to_play':
modules/alsa/alsa-sink.c:453:9: warning: implicit declaration of function 'raise' [-Wimplicit-function-declaration]
modules/alsa/alsa-sink.c:453:9: error: 'SIGTRAP' undeclared (first use in this function)
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Jarkko Suontausta [Tue, 22 May 2012 12:58:33 +0000 (15:58 +0300)]
bluetooth: Release transport when the pa_rtpoll_run loop finishes.
Based on a patch by Marko Ollonen.
Marc-Antoine Perennou [Thu, 17 May 2012 20:50:22 +0000 (22:50 +0200)]
udev: Don't use deprecated udev_get_*_path() functions
[These symbols were removed in libudev.so.1.0.0. Replace them with
hardcoded strings. -- heftig]
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
David Henningsson [Fri, 18 May 2012 20:29:41 +0000 (22:29 +0200)]
once: Fix race causing pa_once to sometimes run twice
There was a race in the existing code that could cause the pa_once code
to be run twice, see:
http://lists.freedesktop.org/archives/pulseaudio-discuss/2012-April/013354.html
Therefore the existing implementation was rewritten to instead look like
the reference implementation here:
http://www.hpl.hp.com/research/linux/atomic_ops/example.php4
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Frédéric Danis [Tue, 15 May 2012 13:55:36 +0000 (15:55 +0200)]
bluetooth: Fix crash on disconnection
When a Bluetooth headset is connected only to HFP profile (not connected
to A2DP) and host streams to it, a crash occurs if host disconnects.
When HFP disconnects, audio thread will fail on POLLHUP then generate
a message to set PA profile to Off before ending.
If this message is managed before PA unload bluetooth device module,
all works fine.
But, if this message is managed during module unload, this finish by
re-entrance in release code (stop_thread) and a crash.
This fix prevents to process profile change when module is unloading.
Lennart Poettering [Tue, 15 May 2012 12:12:38 +0000 (14:12 +0200)]
util: use the return value of gethosid() as fallback, not the address of the function
Yikes!
Arun Raghavan [Mon, 14 May 2012 06:51:45 +0000 (12:21 +0530)]
sink-input,source-output: Avoid unneccessary rate updates
This makes sure we only call sink/source update_rate() if the stream
being woken up has a sample spec that doesn't match the corresponding
device'.
https://bugs.freedesktop.org/show_bug.cgi?id=49875
poljar [Sun, 6 May 2012 14:10:51 +0000 (16:10 +0200)]
pacmd: Added --help and --version descriptions to the man page.
The pacmd man page should show the available options. A simple
description for the --version and --help option was added.
Arun Raghavan [Fri, 11 May 2012 13:20:11 +0000 (18:50 +0530)]
build-sys: Bump soname
Double-bump since v1.99.2 got a bump but the commit never landed.
Paul Menzel [Tue, 24 Apr 2012 21:31:32 +0000 (23:31 +0200)]
Correct spelling of PulseAudio
• s,Pulseaudio,PulseAudio,
• One last occurence of this “error” is in the French translation.
Arun Raghavan [Fri, 11 May 2012 12:02:20 +0000 (17:32 +0530)]
bluetooth: Fix crash due to usage of pa_bool_t instead of dbus_bool_t
pa_bool_t and dbus_bool_t cannot be used interchangably since their size
might (and do) vary. This caused a crash on some systems which was
reported and root caused by: Aidan Thornton <makosoft@googlemail.com>.
Ref: https://bugs.gentoo.org/show_bug.cgi?id=398097
Tanu Kaskinen [Tue, 1 May 2012 17:09:12 +0000 (20:09 +0300)]
alsa: Add support for sound cards with 4-channel input.
Changes in v2:
- Call the mapping a generic 4-channel input mapping
instead of a 4-channel mic array mapping. The mapping
will be used also by sound cards that have two stereo
input jacks, so in those cases talking about mic arrays
is wrong.
- Added a comment about using the "hw" device name.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=45813
Tanu Kaskinen [Thu, 10 May 2012 06:19:23 +0000 (09:19 +0300)]
resampler: Add support for resamplers that consume less data than asked.
libsamplerate_resample() assumed that src_process() would
always consume the whole input buffer. That was an invalid
assumption leading to crashes.
This patch adds a leftover memchunk for storing any
non-consumed input. When pa_resampler_run() is called next
time, the leftover is prepended to the new input.
Changes in v3:
- Make the calculations in pa_resampler_result() and
pa_resampler_max_block_size() more readable and more
correct.
- Rework the leftover storing: instead of using a dedicated
buffer for it, store it in the beginning of remap_buf.
This can avoid some memory copying. (The idea was
suggested by Wang Xingchao.)
- Use a generic save_leftover() function instead of doing
the leftover copying in the resampler implementation.
- Use the leftover logic also with the speex and ffmpeg
resamplers.
[ed: dropped the speex bit since the API guarantees that
it will consume everything -- Arun]
Changes in v2:
- If add_leftover() is called with zero-length input while
the leftover length is non-zero, we don't try to acquire
the input memblock.
- Instead of taking a reference to the original input in
libsamplerate_resample(), we copy the leftover data to a
new memblock. This is done, because otherwise, if the
input is one of the internal buffers, the data can get
overwritten before reading it in add_leftover().
- Store add_leftover_buf size in bytes instead of samples
(more convenient, but less consistent with other code).
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=47156
Tanu Kaskinen [Thu, 10 May 2012 06:19:22 +0000 (09:19 +0300)]
resampler: Use more descriptive buffer names.
Tanu Kaskinen [Thu, 10 May 2012 06:19:21 +0000 (09:19 +0300)]
resampler: Use pa_xnew0() to avoid manual zeroing.
poljar [Tue, 1 May 2012 21:17:22 +0000 (23:17 +0200)]
pacmd: Added --help and --version options.
All utilities should have the --help and --version command line options.
These two were added to pacmd, also the goto label was changed from fail
to quit like in the other utilities.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=45030
Tanu Kaskinen [Wed, 25 Apr 2012 08:25:16 +0000 (11:25 +0300)]
echo-cancel: Clarify function call contexts.
Tanu Kaskinen [Wed, 25 Apr 2012 07:51:38 +0000 (10:51 +0300)]
echo-cancel: Fix memblockq length check.
In addition to changing "plen > u->blocksize" to "plen >=
u->blocksize", I also removed one of the duplicated ifs.
Tanu Kaskinen [Wed, 25 Apr 2012 06:49:08 +0000 (09:49 +0300)]
echo-cancel: Drop the correct amount of samples when skipping.
Paul Menzel [Tue, 24 Apr 2012 21:36:07 +0000 (23:36 +0200)]
doc: Add entry for correct spelling
Due to the formatting of `README` the only occurence of PulseAudio in a
text is capitalized. People reading `README` should at least see the
correct spelling once.
In contrast to reformat just add a spelling section as an easy solution.
Since it is not that important the last place in the ordering might
suffice.
David Henningsson [Wed, 18 Apr 2012 09:41:48 +0000 (11:41 +0200)]
sink/source.h: Clarify set_port comment
State which thread calls set_port in which scenario.
Reported-by: Jyri Sasha <oku@iki.fi>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Peter Meerwald [Fri, 6 Apr 2012 13:06:29 +0000 (15:06 +0200)]
pulse: Fix warning in introspect.h; minor rewording and punctuation.
Peter Meerwald [Fri, 6 Apr 2012 13:06:28 +0000 (15:06 +0200)]
pulse: Clarify proplist doxygen documentation.
Peter Meerwald [Fri, 6 Apr 2012 13:06:27 +0000 (15:06 +0200)]
core: Fix comments.
Peter Meerwald [Fri, 6 Apr 2012 13:06:26 +0000 (15:06 +0200)]
echo-cancel: Upper/lowercase in comment.
Peter Meerwald [Fri, 6 Apr 2012 13:06:25 +0000 (15:06 +0200)]
build: Fix spelling in src/Makefile.am.
Peter Meerwald [Fri, 6 Apr 2012 09:44:57 +0000 (11:44 +0200)]
dbus: Fix dbus argument type in iface-stream.c handle_move().
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=48376
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Colin Guthrie [Sun, 15 Apr 2012 12:39:29 +0000 (13:39 +0100)]
alsa: Add the DTS/DCA mapping to extra-hdmi.conf too.
This is needed for 0b421f on Intel/NVidia hardware.
David Henningsson [Wed, 4 Apr 2012 15:07:13 +0000 (17:07 +0200)]
alsa-sink/source: Make sure volumes are synchronised after fast user switching
Log in as user A, fast user switch to user B, let user B change
port, volume or mute status, then switch back to user A.
At this point we must make sure that the ALSA and PA volumes are
synchronised by writing to the ALSA mixer when the ALSA device
becomes available.
BugLink: https://bugs.launchpad.net/bugs/915035
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Colin Guthrie [Thu, 5 Apr 2012 10:52:24 +0000 (11:52 +0100)]
cli: Allow source-output volumes/mute to be set via CLI
This should have been done a long time ago but it brings symmetry to the API
Colin Guthrie [Thu, 5 Apr 2012 10:41:18 +0000 (11:41 +0100)]
man: Document the cli inteface a little.
This just documents the cli interface syntax. Mostly a lift from
http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/CLI
with some minor editing and bringing up to date.
Also document a few undocumented commands.
Shuffle around the order in 'pacmd help' output to match the order
in the new docs for consistency.
https://bugs.freedesktop.org/show_bug.cgi?id=45029
David Henningsson [Tue, 3 Apr 2012 19:35:07 +0000 (21:35 +0200)]
alsa-sink/source: Really set volumes on port change
If deferred volumes were activated, set_volume does not really set
the volume, and is probably only meant to be called from the main
thread.
As we're currently really setting the port and the mute here (i e
modifying ALSA), we should really modify the volume as well.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Tue, 3 Apr 2012 16:56:21 +0000 (18:56 +0200)]
module-loopback: Reset process_msg callbacks in teardown
Make sure we can't be called into by remaining references to
sink-inputs and source-outputs after we have unloaded, as
that will likely lead to segfaults.
Thanks to Tanu for providing valuable input on this patch.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Frédéric Dalleau [Mon, 2 Apr 2012 09:16:03 +0000 (11:16 +0200)]
loopback: Fix crash on error during init
If an error during pa__init() causes a jump to fail: u->asyncmsgq is not
initialized.
Tanu Kaskinen [Wed, 28 Mar 2012 11:47:20 +0000 (14:47 +0300)]
dbus: Add assertions to get rid of warnings from Coverity.
Coverity thinks that expected_method_sig can be NULL when
it's dereferenced by pa_streq(). Adding assertions doesn't
hurt here (in my opinion), and that should get rid of the
warnings.
Tanu Kaskinen [Wed, 28 Mar 2012 09:27:26 +0000 (12:27 +0300)]
device-manager: Add an assertion to get rid of a warning from Coverity.
Coverity thinks that device_name can be NULL when it's
dereferenced by strcmp. Adding an assertion doesn't hurt
here (in my opinion), and that should get rid of the
warning.
Tanu Kaskinen [Mon, 26 Mar 2012 11:52:27 +0000 (14:52 +0300)]
dbus: Add an assertion to get rid of a warning from Coverity.
Coverity thinks that sample can be NULL when it's
dereferenced after this line. Adding an assertion doesn't
hurt here (in my opinion), and that should get rid of the
warning.
Tanu Kaskinen [Mon, 26 Mar 2012 11:35:30 +0000 (14:35 +0300)]
alsa: Fix SND_MIXER_SCHN_LAST related stuff.
Valid channel id range is from 0 to SND_MIXER_SCHN_LAST,
inclusive, so the size of the masks array in pa_alsa_element
has to be SND_MIXER_SCHN_LAST + 1. Similar "too small"
arrays were also in alsa-sink's and alsa-source's userdata,
but actually those arrays were not used at all so they were
removed.
element_is_subset() in alsa-mixer.c skipped the last channel
id when iterating the element masks array; that's now fixed
as well.
Thanks to David Henningsson for spotting the too small
arrays in alsa-sink and alsa-source and the
element_is_subset() problem.
Tanu Kaskinen [Fri, 23 Mar 2012 09:36:39 +0000 (11:36 +0200)]
device-manager: Fix a memory leak.
Tanu Kaskinen [Fri, 23 Mar 2012 09:01:22 +0000 (11:01 +0200)]
sample-util: Remove redundant check from pa_volume_memchunk.
Add also an assertion for the sample spec validity. The
existing code already does crash in case of an invalid
sample spec, but the error would not be as obvious: the
crash would happen due to a divide-by-zero operation in
pa_frame_aligned().