drm/amdgpu: reserve at least 4MB of VRAM for page tables v2

This hopefully helps reduce the contention for page tables.

v2: adjust maximum reported VRAM size as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use moving fence instead of exclusive for VM updates

Make VM updates depend on the moving fence instead of the exclusive one.

Makes it less likely to actually have a dependency.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: do proper cleanups on hw_fini

These are needed for smu_reset support.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update cached feature enablement status V3

Need to update in cache feature enablement status after pp_feature
settings. Another fix for the commit below:
drm/amd/powerplay: implment sysfs feature status function in smu

V2: update smu_feature_update_enable_state() and relates
V3: use bitmap_or and bitmap_andnot

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: guard manual mode prerequisite for clock level force

Force clock level is for dpm manual mode only.

Reported-by: Candice Li <candice.li@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: only apply gds clearing workaround when ras is supported

gds clearing workaround should only be applied on asics that support gfx ras

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix memory leak when ras is not supported on specific ip block

free ras_if if ras is not supported

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: check mmhub_funcs pointer before refering to it

mmhub callback functions are not initialized for all the ASICs

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove unnecessary TLB workaround (v2)

This workaround is better handled in user mode in a way that doesn't
require allocating extra memory and breaking userptr BOs.

The TLB bug is a performance bug, not a functional or security bug.
Hence it is safe to remove this kernel part of the workaround to
allow a better workaround using only virtual address alignments in
user mode.

v2: Removed VI_BO_SIZE_ALIGN definition

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use optimal mtypes and PTE bits for Arcturus

For compute VRAM allocations on Arturus use the new RW mtype
for non-coherent local memory, CC mtype for coherent local
memory and PTE_SNOOPED bit for invalidating non-dirty cache
lines on remote XGMI mappings.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Determing PTE flags separately for each mapping (v3)

The same BO can be mapped with different PTE flags by different GPUs.
Therefore determine the PTE flags separately for each mapping instead
of storing them in the KFD buffer object.

Add a helper function to determine the PTE flags to be extended with
ASIC and memory-type-specific logic in subsequent commits.

v2: Split Arcturus-specific MTYPE changes into separate commit
v3: Fix return type of get_pte_flags to uint64_t

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Support new arcturus mtype

Arcturus repurposed mtype WC to RW. Modify gmc functions
to support the new mtype

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Extends amdgpu vm definitions (v2)

Add RW mtype introduced for arcturus.

v2:
* Don't add probe-invalidation bit from UAPI
* Don't add unused AMDGPU_MTYPE_ definitions

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to amdgpu_ras_late_init for nbio v7_4 (v2)

call helper function in late init phase to handle ras init
for nbio ip block

v2: init local var r to 0 in case the function return failure
on asics that don't have ras_late_init implementation

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ras_late_init callback function for nbio v7_4 (v3)

ras_late_init callback function will be used to do common ras
init in late init phase.

v2: call ras_late_fini to do cleanup when fails to enable interrupt

v3: rename sysfs/debugfs node name to pcie_bif_xxx

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add mmhub ras_late_init callback function (v2)

The function will be called in late init phase to do mmhub
ras init

v2: check ras_late_init function pointer before invoking the
function

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to amdgpu_ras_late_init for gmc v9 block (v2)

call helper function in late init phase to handle ras init
for gmc ip block

v2: call ras_late_fini to do clean up when fail to enable interrupt

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to amdgpu_ras_late_init for sdma v4 block (v2)

call helper function in late init phase to handle ras init
for sdma ip block

v2: call ras_late_fini to do clean up when fail to enable interrupt

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to amdgpu_ras_late_init for gfx v9 block (v2)

call helper function in late init phase to handle ras init
for gfx ip block

v2: call ras_late_fini to do clean up when fail to enable interrupt

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add helper function to do common ras_late_init/fini (v3)

In late_init for ras, the helper function will be used to
1). disable ras feature if the IP block is masked as disabled
2). send enable feature command if the ip block was masked as enabled
3). create debugfs/sysfs node per IP block
4). register interrupt handler

v2: check ih_info.cb to decide add interrupt handler or not

v3: add ras_late_fini for cleanup all the ras fs node and remove
interrupt handler

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: poll ras_controller_irq and err_event_athub_irq status

For the hardware that can not enable BIF ring for IH cookies for both
ras_controller_irq and err_event_athub_irq, the driver has to poll the
status register in irq handling and ack the hardware properly when there
is interrupt triggered

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add ras_controller and err_event_athub interrupt support

Ras controller interrupt and Ras err event athub interrupt are two dedicated
interrupts for RAS support.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update nbio v7_4 ip header files

Add mmBIF_INTR_CNTL and its shift mask.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add nbif v7_4 irq source header for vega20

nbif v7_4 interrupt source definition

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/nbio: add functions to query ras specific interrupt status

ras_controller_interrupt and err_event_interrupt are ras specific interrupts.
add functions to check their status and ack them if they are generated. both
funcitons should only be invoked in ISR when BIF ring is disabled or even not
initialized.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to new amdgpu_nbio structure

no functional change, just switch to new structures

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new amdgpu nbio header file

More nbio funcitonalities will be added and nbio could
be treated as an ip block like gfx/sdma.etc

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next

single etnaviv fix for an error path.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/4ae00cfb47c8e6fffca5dbb45ae9370cd4e5eaf4.camel@pengutronix.de

Merge tag 'drm-next-5.4-2019-08-30' of git://people.freedesktop.org/~agd5f/linux into drm-next

drm-next-5.4-2019-08-30:

amdgpu:
- Add DC support for Renoir
- Add some GPUVM hw bug workarounds
- add support for the smu11 i2c controller
- GPU reset vram lost bug fixes
- Navi1x powergating fixes
- Navi12 power fixes
- Renoir power fixes
- Misc bug fixes and cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830212650.5055-1-alexander.deucher@amd.com

Merge tag 'exynos-drm-next-for-v5.4' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

- JUst one cleanup which drops the use of drmP.h header file.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <daeinki@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190901120619.3992-1-daeinki@gmail.com

drm/etnaviv: fix missing unlock on error in etnaviv_iommuv1_context_alloc()

Add the missing unlock before return from function etnaviv_iommuv1_context_alloc()
in the error handling case.

Fixes: 27b67278e007 ("drm/etnaviv: rework MMU handling")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

drm/exynos: drop use of drmP.h

There was a few uses of drmP that was missed in the last
patch removing this header from exynos.

Remove the final uses of this header.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/amdgpu: Move null pointer dereference check

Null pointer dereference check should have been checked,
ahead of below routine.
struct amdgpu_device *adev = hwmgr->adev;

With this commit, it could avoid potential NULL dereference.

Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix undefined dm_ip_block for navi12

There is missing "if defined" CONFIG_DRM_AMD_DC block for non DC
configurations. This will cause link error. The patch is fixing that.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=110979
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix no interrupt issue for renoir emu (v2)

In renoir's vega10_ih model, there's a security change in mmIH_CHICKEN
register, that limits IH to use physical address (FBPA, GPA) directly.
Those chicken bits need to be programmed first.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update IH_CHICKEN in oss 4.0 IP header for VG/RV series

In Renoir's emulator, those chicken bits need to be programmed.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: SMU_MSG_OverridePcieParameters is unsupport for APU

For apu, SMU_MSG_OverridePcieParameters is unsupport.
So return directly in smu_override_pcie_parameters function.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Handle job is NULL use case in amdgpu_device_gpu_recover

This should be checked at all places job is accessed.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable DC on Renoir

Enable DC support for renoir.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN2.1 changes to DML

Hook up the DML changes for renoir.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correct order of RV family clk managers for Renoir

Need to check for renoir first.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add Renoir to kconfig

Add a kconfig option to enable renoir.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: build dcn21 blocks

Enable the building of dcn21 support.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add dcn21 core DC changes

Add missing parameters, to make dcn21 compile
without errors

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add dal_asic_id for renoir

Add the rev id for renoir.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: call update_bw_bounding_box

call update_bw_bounding_box in DC construct

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Handle Renoir in amdgpu_dm (v2)

Hook up renoir support to KMS.

v2: squash in "Fixes for Renoir in amdgpu_dm"

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Handle Renoir in DC

add Renoir DCN version in DC and handle it

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix register names

rename VM_CONTEXT0 to  MMVM_CONTEXT0 as that is the name defined in
the register files

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Renoir DML

DML provides the display configuration validation as provided
by the hw teams.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Renoir GPIO

Misc display related configuration details.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Renoir resource (v2)

Manages the renoir display resources (crtcs, phys, plls, etc.).

v2: rebase (Alex)

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Renoir clock manager

Controls display clocks and interfaces with powerplay for
clock and power requirements.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Renoir Hubbub (v2)

Controls the display hw's interface to memory.

v2: rebase (Alex)

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Renoir hubbub registers list

These are the registers used to program the hubbub hw.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add hubp block for Renoir (v2)

This provides the interface to memory for the display hw.

v2: minor cleanup (Alex)

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Renoir irq_services (v2)

Provides the interface to configure display interrrupts on renoir.

v2: rebase fix (Alex)

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add pp_smu functions for Renoir

This defines the interface for communicating requirements
between DC and powerplay.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Renoir hw_seq register list

These are the registers used to for the hw sequences
for modesetting.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Renoir clock registers list

These are the registers used to program the clock hw.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Renoir registers (v3)

add registers for dcn, clk, and renoir ip offsets

v2: header cleanup (Alex)
v3: Add DPCS registers (Hersen)

Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add the interface for getting ultimate frequency v3

add the get_dpm_ultimate_freq for supporting different swSMU.
-v2:
        Handle the unsupported clock type and read smc message failed case and return error code.
        Move the smu12 uclk frequency retrieved logic to renoir ppt.
-v3:
        Use goto clause to handle invalidate clk index.
        Add the limited tag for smu_get_dpm_uclk to avoid other likewise interface introduced.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable populate DPM clocks table for swSMU APU

Should populate DPM clocks tables during hw init,otherwise will
suffer from invalidate table.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: regards the APU always enable the dpm feature mask

There is no driver message to enable/disable feature mask for APU.
For the sake of APU reusing swSMU interface and assume APU supports all
the feature.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Initialize and update SDMA power gating

Init SDMA HW base configuration and enable idle INT for rn.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: keep TMR in visible vram region for SRIOV

Fix compute ring test failure in sriov scenario.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: keep the stolen memory in visible vram region

stolen memory should be fixed in visible region.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix spelling mistake "jumpimng" -> "jumping"

There is a spelling mistake in a DRM_DEBUG_DRIVER debug message.
Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/virtual_dce: drop error message in hw_init

No need to add new asic cases.  This is a sw display
implementation, so just drop the error message so when
we add new asics, all we have to do is add the virtual
dce IP module.

Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/si: fix ASIC tests

Comparing adev->family with CHIP constants is not correct.
adev->family can only be compared with AMDGPU_FAMILY constants and
adev->asic_type is the struct member to compare with CHIP constants.
They are separate identification spaces.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10")
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: hide voltage and power sensors on SI and KV parts

The driver does not support these sensors yet and there is no point in
creating sysfs attributes which will always return an error.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: introduce vram lost for reset (v2)

for SOC15/vega10 the BACO reset & mode1 would introduce vram lost
in high end address range, current kmd's vram lost checking cannot
catch it since it only check very ahead visible frame buffer

v2:
cover NV as well

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable jpeg powergating for navi1x

jpeg pg depends on vcn pg

Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable athub powergating for navi12

Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable vcn powergating for navi12

Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct in_suspend setting for navi series

in_suspend flag should be set in amdgpu_device_suspend/resume in pairs,
instead of gfx10 ip suspend/resume function.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix GFXOFF on Picasso and Raven2

For picasso(adev->pdev->device == 0x15d8)&raven2(adev->rev_id >= 0x8),
firmware is sufficient to support gfxoff.
In commit 98f58ada2d37e, for picasso&raven2,
return directly and cause gfxoff disabled.

Fixes: 98f58ada2d37 ("drm/amdgpu/gfx9: update pg_flags after determining if gfx off is possible")
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: remove meaningless descending into amd/amdkfd/

Since commit 04d5e2765802 ("drm/amdgpu: Merge amdkfd into amdgpu"),
drivers/gpu/drm/amd/amdkfd/Makefile does not contain any syntax that
is understood by the build system.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add APTX quirk for Dell Latitude 5495

Needs ATPX rather than _PR3 to really turn off the dGPU. This can save
~5W when dGPU is runtime-suspended.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused function setFieldWithMask

After commit a9f54ce3c603 ("drm/amd/display: Refactoring VTEM"),
there is no caller in tree.

Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: correct the pp_feature output on Arcturus

Fix for the commit below:
drm/amd/powerplay: implment sysfs feature status function in smu

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: correct Vega20 dpm level related settings

Correct the settings for auto mode and skip the unnecessary
settings for dcefclk and fclk.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Vega20 SMU I2C HW engine controller.

Implement HW I2C enigne controller to be used by the RAS EEPROM
table manager. This is based on code from ATITOOLs.

v2:
Rename the file and all function prefixes to smu_v11_0_i2c

By Luben's observation always fill the TX fifo to full so
we don't have garbadge interpreted by the slave as valid data.

v3:
Remove preemption disable as the HW I2C controller will not
stop the clock on empty TX fifo and so it's not critical to
keep not empty queue.
Switch to fast mode 400 khz SCL clock for faster read and write.

v5:
Restore clock gating before releasing I2C bus and fix some
style comments.

v6:
squash in warning fix, fix includes (Alex)

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Luben Tuikov <Luben.Tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Add interface to lock SMU HW I2C.

v2:
PPSMC_MSG_RequestI2CBus seems not to work and so to avoid conflict
over I2C bus and engine disable thermal control access to
force SMU stop using the I2C bus until the issue is reslolved.

Expose and call vega20_is_smc_ram_running to skip locking when SMU
FW is not yet loaded.

v3:
Remove the prevoius hack as the SMU found the bug.

v5: Typo fix

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Import smuio_11_0 headers for EEPROM access on Vega20

v3: Merge CKSVII2C_IC regs into exsisting headers.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add RAS EEPROM table.

Add RAS EEPROM table manager to eanble RAS errors to be stored
upon appearance and retrived on driver load.

v2: Fix some prints.

v3:
Fix checksum calculation.
Make table record and header structs packed to do correct byte value sum.
Fix record crossing EEPROM page boundry.

v4:
Fix byte sum val calculation for record - look at sizeof(record).
Fix some style comments.

v5: Add description to EEPROM_TABLE_RECORD_SIZE and syntax fixes.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Luben Tuikov <Luben.Tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: free up the first paging queue v2"

This reverts commit 4f8bc72fbf10f2dc8bca74d5da08b3a981b2e5cd.

It turned out that a single reserved queue wouldn't be
sufficient for page fault handling.

Signed-off-by: Gang Ba <gaba@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: fix build error without CONFIG_DRM_AMD_DC_DSC_SUPPORT

If CONFIG_DRM_AMD_DC_DSC_SUPPORT is not set, build fails:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hwseq.c: In function dcn20_hw_sequencer_construct:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hwseq.c:2099:28:
 error: dcn20_dsc_pg_control undeclared (first use in this function); did you mean dcn20_dpp_pg_control?
  dc->hwss.dsc_pg_control = dcn20_dsc_pg_control;
                            ^~~~~~~~~~~~~~~~~~~~
                            dcn20_dpp_pg_control

Use CONFIG_DRM_AMD_DC_DSC_SUPPORT to guard this.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 8a31820b1218 ("drm/amd/display: Make init_hw and init_pipes generic for seamless boot")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Fix an off by one in navi10_get_smu_msg_index()

The navi10_message_map[] array has SMU_MSG_MAX_COUNT elements so the ">"
has to be changed to ">=" to prevent reading one element beyond the end
of the array.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix error message

Since reservation_object_wait_timeout_rcu is called with
interruptable set to false it's wrong to say
'or interrupted' in the error message.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add dummy read for some GCVM status registers

The GRBM register interface is now capable of bursting 1 cycle per
register wr->wr, wr->rd much faster than previous muticycle per
transaction done interface.  This has caused a problem where status
registers requiring HW to update have a 1 cycle delay, due to the
register update having to go through GRBM.

SW may operate on an incorrect value if they write a register and
immediately check the corresponding status register.

Registers requiring HW to clear or set fields may be delayed by 1 cycle.
For example,

1. write VM_INVALIDATE_ENG0_REQ mask = 5a
2. read VM_INVALIDATE_ENG0_ACK till the ack is same as the request mask = 5a
    a. HW will reset VM_INVALIDATE_ENG0_ACK = 0 until invalidation is complete
3. write VM_INVALIDATE_ENG0_REQ mask = 5a
4. read VM_INVALIDATE_ENG0_ACK till the ack is same as the request mask = 5a
    a. First read of VM_INVALIDATE_ENG0_ACK = 5a instead of 0
    b. Second read of VM_INVALIDATE_ENG0_ACK = 0 because
       the remote GRBM h/w register takes one extra cycle to be cleared
    c. In this case, SW will see a false ACK if they exit on first read

Affected registers (only GC variant)  |  Recommended Dummy Read
--------------------------------------+----------------------------
VM_INVALIDATE_ENG*_ACK                |  VM_INVALIDATE_ENG*_REQ
VM_L2_STATUS                          |  VM_L2_STATUS
VM_L2_PROTECTION_FAULT_STATUS         |  VM_L2_PROTECTION_FAULT_STATUS
VM_L2_PROTECTION_FAULT_ADDR_HI/LO32   |  VM_L2_PROTECTION_FAULT_ADDR_HI/LO32
VM_L2_IH_LOG_BUSY                     |  VM_L2_IH_LOG_BUSY
MC_VM_L2_PERFCOUNTER_HI/LO            |  MC_VM_L2_PERFCOUNTER_HI/LO
ATC_L2_PERFCOUNTER_HI/LO              |  ATC_L2_PERFCOUNTER_HI/LO
ATC_L2_PERFCOUNTER2_HI/LO             |  ATC_L2_PERFCOUNTER2_HI/LO

Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-next-5.4-2019-08-23' of git://people.freedesktop.org/~agd5f/linux into drm-next

drm-next-5.4-2019-08-23:

amdgpu:
- Enable power features on Navi12
- Enable power features on Arcturus
- RAS updates
- Initial Renoir APU support
- Enable power featyres on Renoir
- DC gamma fixes
- DCN2 fixes
- GPU reset support for Picasso
- Misc cleanups and fixes

scheduler:
- Possible race fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823202620.3870-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-2019-08-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.4:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
  - dma-buf: dma-fence selftests

Driver Changes:
  - kirin: Various cleanups and reworks
  - komeda: Add support for DT memory-regions
  - meson: Rely on the compatible to detect vpu features
  - omap: Implement alpha and pixel blend mode properties
  - panfrost: Implement per-fd address spaces, various fixes
  - rockchip: DSI DT binding rework
  - fbdev: Various cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823083509.c7mduqdqjnxc7ubb@flea

Merge tag 'drm-hisilicon-hibmc-next-2019-08-26' of https://github.com/xin3liang/linux into drm-next

Three small cleanup and fix patches for 5.4 hisilicon hibmc driver.
I have tested and verified on taishan 2280v1/v2 machines.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: xinliang <z.liuxinliang@hisilicon.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5D63A271.7080400@hisilicon.com

Merge tag 'imx-drm-next-2019-08-23' of git://git.pengutronix.de/pza/linux into drm-next

drm/imx: IPUv3 image converter fixes and improvements

Fix image converter seam handling for 1024x1024 pixel hardware
limitation at the main processing section input, improve error
handling, and slightly optimize for 1:1 conversions.
Add support for newly defined 32-bit RGB V4L2 pixel formats.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1566573659.23587.2.camel@pengutronix.de

Merge tag 'drm-intel-next-2019-08-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- More TGL enabling work (Michel, Jose, Lucas)
- Fixes on DP MST (Ville)
- More GTT and Execlists fixes and improvements (Chris)
- Code style clean-up on hdmi and dp side (Jani)
- Fix null pointer dereferrence (Xiong)
- Fix a couple of missing serialization on selftests (Chris)
- More vm locking rework (Chris)

drm-intel-next-2019-08-20:
- GuC and HuC related fixes and improvements (Daniele, Michal)
- Improve debug with more engine information and rework on debugfs files (Chris, Stuart)
- Simplify appearture address handling (Chris)
- Other fixes and cleanups around engines and execlists (Chris)
- Selftests fixes (Matt, Chris)
- Gen11 cache flush related fixes and improvements (Mika)
- More work around requests, timelines and locks to allow removal of struct_mutex (Chris)
- Add missing CML PCI ID (Anusha)
- More work on the new i915 buddy allocator (Matt)
- More headers, files and directories reorg (Daniele)
- Improvements on ggtt’s get pdp (Mika)
- Fix GPU reset (Chris)
- Fix GPIO pins on gen11 (Matt)
- Fix HW readout for crtc_clock in HDMI mode (Imre)
- Sanitize display Phy during unitit to workaround messages of HW state change during suspend (Imre)
- Be defensive when starting vma activity (Chris)
- More Tiger Lake enabling work (Michel, Daniele, Lucas)
- Relax pd_used assertion (Chris)

drm-intel-next-2019-08-13:
- More Tiger Lake enabling work (Lucas, Jose, Tomasz, Michel, Jordan, Anusha, Vandita)
- More selftest organization reworks, fixes and improvements (Lucas, Chris)
- Simplifications on GEM code like context and cleanup_early (Chris, Daniele)
- GuC and HuC related fixes and improvements (Daniele, Michal, Chris)
- Some clean up and fixes on headers, Makefile, and generated files (Lucas, Jani)
- MOCS setup clean up (Tvrtko)
- More Elkhartlake enabling work (Jose, Matt)
- Fix engine reset by clearing in flight execlists requests (Chris)
- Fix possible memory leak on intel_hdcp_auth_downstream (Wei)
- Introduce intel_gt_runtime_suspend/resume (Daniele)
- PMU improvements (Tvrtko)
- Flush extra hard after writing relocations through the GTT (Chris)
- Documentations fixes (Michal, Chris)
- Report dma_reserv allocation failure (Chris)
- Improvements around shrinker (Chris)
- More improvements around engine handling (Chris)
- Also more s/dev_priv/i915 (Chris)
- Abstract display suspend/resume operations (Rodrigo/Jani)
- Drop VM_IO from GTT mappings (Chris)
- Fix some NULL vs IS_ERR conditions (Dan)
- General improvements on error state (Chris)
- Isolate i915_getparam_iocrtl to its own file (Chris)
- Perf OA object refactor (Umesh)
- Ignore central i915->kernel_context and allocate it directly (Chris)
- More fixes and improvements around wakerefs (Chris)
- Clean-up and improvements around debugfs (Chris)
- Free the imported shmemfs file for phys objects (Chris)
- Many other fix and cleanups around engines and execlists (Chris)
- Split out uncore_mmio_debug (Daniele)
- Memory management fixes for blk and gtt (Matt)
- Introduction of buddy allocator to handle huge-pages for GTT (Matt)
- Fix ICL and TGL PG3 power domains (Anshuman)
- Extract GT IRQ to gt/ (Andi)
- Drop last_fence tracking in favor of whole vma->active (Chris)
- Make overlay to use i915_active instead of i915_active_request (Chris)
- Move misc display IRQ handling to its own function (Jose)
- Introduce new _TRANS2() macro in preparation for some coming PSR related work (Jose)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823051435.GA23885@intel.com

drm/hisilicon/hibmc: Make CONFIG_DRM_HISI_HIBMC depend on ARM64

Hisilicon developed hibmc_drm for their arm64 based soc and did not
intend for this driver to be used on any other architecture than arm64.

Using it on amd64 leads to incorrect video modes being used, making
the screen unreadable, forcing users to manually blacklist the module
on the kernel command line to use the d-i server installer or any
graphical sessions.

Make CONFIG_DRM_HISI_HIBMC firmly depend on ARM64 to ensure it is not
built for other architectures.

Signed-off-by: Matthew Ruffell <matthew.ruffell@canonical.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

drm/hisilicon: Use dev_get_drvdata

Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

drm/hisilicon/hibmc: Using module_pci_driver.

Remove boilerplate code by using macro module_pci_driver.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

drm/amd/display: 3.2.48

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>