rtw88: 8822c: update RF_B (2/2) parameter tables to v60

Update RTL8822C devices' RF_A tables to v60.
The new parameters fix incorrect RSSI report under 2.4G link.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-9-pkshih@realtek.com

rtw88: 8822c: update RF_B (1/2) parameter tables to v60

Update RTL8822C devices' RF_B tables to v60.
The new parameters fix incorrect RSSI report under 2.4G link.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-8-pkshih@realtek.com

rtw88: 8822c: update RF_A parameter tables to v60

Update RTL8822C devices' RF_A tables to v60.
The new parameters fix incorrect RSSI report under 2.4G link.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-7-pkshih@realtek.com

rtw88: 8822c: update MAC/BB parameter tables to v60

Update RTL8822C devices' MAC/BB tables to v60.
The new parameters fix incorrect RSSI report under 2.4G link.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-6-pkshih@realtek.com

rtw88: replace tx tasklet with work queue

Replace tasklet so we can do tx scheduling in parallel. Since throughput
is delay-sensitive in most cases, we allocate a dedicated, high priority
wq for our needs.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-5-pkshih@realtek.com

rtw88: add napi support

Use napi to reduce overhead on rx interrupts.

Driver used to interrupt kernel for every Rx packet, this could
affect both system and network performance. NAPI is a mechanism that
uses polling when processing huge amount of traffic, by doing this
the number of interrupts can be decreased.

Network performance can also benefit from this patch. Since TCP
connection is bidirectional and acks are required for every several
packets. These ack packets occupie the PCI bus bandwidth and could
lead to performance degradation.

When napi is used, GRO receive is enabled by default in the mac80211
stack. So mac80211 won't pass every RX TCP packets to the kernel TCP
network stack immediately. Instead an aggregated large length TCP packet
will be delivered.

This reduces the tx acks sent and gains rx performance. After the patch,
the Rx throughput increases about 25Mbps in 11ac.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-4-pkshih@realtek.com

rtw88: add rts condition

Since we set the IEEE80211_HW_HAS_RATE_CONTROL flag, so use_rts in
ieee80211_tx_info will never be set in the ieee80211_xmit_fast path.
Add length check for skb to decide whether rts is needed.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-3-pkshih@realtek.com

rtw88: add dynamic rrsr configuration

Register rrsr determines the response rate we send.
In field tests, using rate higher than current tx rate could lead
to difficulty for the receiving end to receive management/control
frames. Calculate current modulation level by tx rate then cross out
rate higher than those.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209070755.23019-2-pkshih@realtek.com

iwlwifi: remove incorrect comment in pnvm

We use this driver as a backport that also runs on older kernels (as
part of the backports project).  So we use some checks to backport or
prevent code from compiling in incompatible kernel version.

When I took one of the PNVM patches from the backport, I accidentally
left the comment that a certain part of the code doesn't work in older
kernels.  This obviously should never be valid for the mainline.
Remove this comment.

Reported-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210211223049.40d545a0fa89.I04793aaa5312b926335c8db32131f000432df511@changeid

Merge ath-next from git://git./linux/kernel/git/kvalo/ath.git

ath.git patches for v5.12. Major changes:

wil6210

* add support for extended DMG MCS 12.1 rate

Merge tag 'iwlwifi-next-for-kalle-2021-02-10' of git://git./linux/kernel/git/iwlwifi/iwlwifi-next

Second set of iwlwifi patches intended for v5.12

* Add some device IDs that got lost in a rebase;
* A bunch of fixes in the PPAG code;
* A few fixes in the debugging framework;
* Fix a couple of potential crashes in error paths;
* More HW IDs for new HW;
* Add one more value to the device configuration code;
* Support new scan config FW API;
* Some more CSA fixes;
* Support for RF interference mitigation (RFI);
* Improvements in the NVM flows;
* Bump the FW API support version;
* Implement support for PNVM from BIOS;
* Fix PM status when a FW crash happens;
* Some other small fixes, clean-ups and improvements.

# gpg: Signature made Thu 11 Feb 2021 02:02:34 AM EET using RSA key ID 1A3CC5FA
# gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>"
# gpg:                 aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"

ath11k: qmi: add debug message for allocated memory segment addresses and sizes

This helps debugging firmware memory allocation problems.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1613041549-7265-1-git-send-email-kvalo@codeaurora.org

ath11k: pci: remove experimental warning

I have received feedback that QCA6390 PCI support is working for many, and I'm
also using QCA6390 on my daily driver^Hlaptop. While there are issues still
to be resolved it's not really experimental anymore, so remove the experimental
warning from driver initialisation.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1613040697-20289-1-git-send-email-kvalo@codeaurora.org

ath10k: hold RCU lock when calling ieee80211_find_sta_by_ifaddr()

ieee80211_find_sta_by_ifaddr() must be called under the RCU lock and
the resulting pointer is only valid under RCU lock as well.

Fix ath10k_wmi_tlv_op_pull_peer_stats_info() to hold RCU lock before it
calls ieee80211_find_sta_by_ifaddr() and release it when the resulting
pointer is no longer needed.

This problem was found while reviewing code to debug RCU warn from
ath10k_wmi_tlv_parse_peer_stats_info().

Link: https://lore.kernel.org/linux-wireless/7230c9e5-2632-b77e-c4f9-10eca557a5bb@linuxfoundation.org/
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210210212107.40373-1-skhan@linuxfoundation.org

ath10k: change ath10k_offchan_tx_work() peer present msg to a warn

Based on the comment block in this function and the FIXME for this, peer
being present for the offchannel tx is unlikely. Peer is deleted once tx
is complete. Change peer present msg to a warn to detect this condition.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/3b1f71272d56ee1d7f567fbce13bdb56cc06d342.1612915444.git.skhan@linuxfoundation.org

ath9k: fix data bus crash when setting nf_override via debugfs

When trying to set the noise floor via debugfs, a "data bus error"
crash like the following can happen:

[   88.433133] Data bus error, epc == 80221c28, ra == 83314e60
[   88.438895] Oops[#1]:
[   88.441246] CPU: 0 PID: 7263 Comm: sh Not tainted 4.14.195 #0
[   88.447174] task: 838a1c20 task.stack: 82d5e000
[   88.451847] $ 0   : 00000000 00000030 deadc0de 83141de4
[   88.457248] $ 4   : b810a2c4 0000a2c4 83230fd4 00000000
[   88.462652] $ 8   : 0000000a 00000000 00000001 00000000
[   88.468055] $12   : 7f8ef318 00000000 00000000 77f802a0
[   88.473457] $16   : 83230080 00000002 0000001b 83230080
[   88.478861] $20   : 83a1c3f8 00841000 77f7adb0 ffffff92
[   88.484263] $24   : 00000fa4 77edd860
[   88.489665] $28   : 82d5e000 82d5fda8 00000000 83314e60
[   88.495070] Hi    : 00000000
[   88.498044] Lo    : 00000000
[   88.501040] epc   : 80221c28 ioread32+0x8/0x10
[   88.505671] ra    : 83314e60 ath9k_hw_loadnf+0x88/0x520 [ath9k_hw]
[   88.512049] Status: 1000fc03 KERNEL EXL IE
[   88.516369] Cause : 5080801c (ExcCode 07)
[   88.520508] PrId  : 00019374 (MIPS 24Kc)
[   88.524556] Modules linked in: ath9k ath9k_common pppoe ppp_async l2tp_ppp cdc_mbim batman_adv ath9k_hw ath sr9700 smsc95xx sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_conntrack_ipv6 mcs7830 mac80211 kalmia iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm ftdi_sio dm9601 cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbserial usbnet usbhid slhc rtl8150 r8152 pegasus nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack
[   88.597894]  libcrc32c kaweth iptable_mangle iptable_filter ipt_ECN ipheth ip_tables hso hid_generic crc_ccitt compat cdc_wdm cdc_acm br_netfilter hid evdev input_core nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_beet ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel xfrm4_mode_tunnel xfrm4_mode_transport xfrm4_mode_beet ipcomp esp4 ah4 tunnel6 tunnel4 tun xfrm_user xfrm_ipcomp af_key xfrm_algo sha256_generic sha1_generic jitterentropy_rng drbg md5 hmac echainiv des_generic deflate zlib_inflate zlib_deflate cbc authenc crypto_acompress ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16 mii aead crypto_null cryptomgr crc32c_generic
[   88.671671]  crypto_hash
[   88.674292] Process sh (pid: 7263, threadinfo=82d5e000, task=838a1c20, tls=77f81efc)
[   88.682279] Stack : 00008060 00000008 00000200 00000000 00000000 00000000 00000000 00000002
[   88.690916]         80500000 83230080 82d5fe22 00841000 77f7adb0 00000000 00000000 83156858
[   88.699553]         00000000 8352fa00 83ad62b0 835302a8 00000000 300a00f8 00000003 82d5fe38
[   88.708190]         82d5fef4 00000001 77f54dc4 77f80000 77f7adb0 c79fe901 00000000 00000000
[   88.716828]         80510000 00000002 00841000 77f54dc4 77f80000 801ce4cc 0000000b 41824292
[   88.725465]         ...
[   88.727994] Call Trace:
[   88.730532] [<80221c28>] ioread32+0x8/0x10
[   88.734765] Code: 00000000  8c820000  0000000f <03e00008> 00000000  08088708  00000000  aca40000  03e00008
[   88.744846]
[   88.746464] ---[ end trace db226b2de1b69b9e ]---
[   88.753477] Kernel panic - not syncing: Fatal exception
[   88.759981] Rebooting in 3 seconds..

The "REG_READ(ah, AR_PHY_AGC_CONTROL)" in ath9k_hw_loadnf() does not
like being called when the hardware is asleep, leading to this crash.

The easiest way to reproduce this is trying to set nf_override while
the hardware is down:

  $ ip link set down dev wlan0
  $ echo "-85" > /sys/kernel/debug/ieee80211/phy0/ath9k/nf_override

Fixing this crash by waking the hardware up before trying to set the
noise floor. Similar to what other ath9k debugfs files do.

Tested on a Lima board from 8devices, which has a QCA 4531 chipset.

Fixes: b90189759a7f ("ath9k: add noise floor override option")
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209184352.4272-1-linus.luessing@c0d3.blue

ath11k: add support to configure spatial reuse parameter set

The SPR parameter set comprises OBSS PD threshold for SRG
and non SRG and Bitmap of BSS color and partial BSSID. This adds
support to configure fields of SPR element to firmware.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01164-QCAHKSWPL_SILICONZ-1
Tested-by: Muna Sinada <msinada@codeaurora.org>
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1612843714-29174-1-git-send-email-rmanohar@codeaurora.org

ath10k: restore tx sk_buff of htt header for SDIO

ieee80211_report_used_skb of mac80211 use the frame_control of
ieee80211_hdr in sk_buff and indicate it to another function
ieee80211_mgd_conn_tx_status, then it queue work ieee80211_sta_work,
but ieee80211_is_auth(fc) in ieee80211_sta_work check fail when the
authentication has transmitted by ath10k.

When the ath10k report it with HTT_TX_COMPL_STATE_DISCARD, it will be
set without flag IEEE80211_TX_STAT_ACK, then mac80211 should try the
next authentication immeditely, but in fact mac80211 wait 1 second for
it, the reason is ieee80211_is_auth(fc) in ieee80211_sta_work check
fail for the sk_buff which is not restored, the data of sk_buff is not
the begin of ieee80211_hdr, in fact it is the begin of htt_cmd_hdr.

dmesg without this patch, it wait 1 second for the next retry when
ath10k report without IEEE80211_TX_STAT_ACK for authentication:
[ 6973.883116] wlan0: send auth to 5e:6f:2b:0d:fb:d7 (try 1/3)
[ 6974.705471] wlan0: send auth to 5e:6f:2b:0d:fb:d7 (try 2/3)
[ 6975.712962] wlan0: send auth to 5e:6f:2b:0d:fb:d7 (try 3/3)

Restore the sk_buff make mac8011 retry the next authentication
immeditely which meet logic of mac80211.

dmesg with this patch, it retry the next immeditely when ath10k
report without IEEE80211_TX_STAT_ACK for authentication:
[  216.734813] wlan0: send auth to 5e:6f:2b:0d:fb:d7 (try 1/3)
[  216.739914] wlan0: send auth to 5e:6f:2b:0d:fb:d7 (try 2/3)
[  216.745874] wlan0: send auth to 5e:6f:2b:0d:fb:d7 (try 3/3)

Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1612839530-2263-1-git-send-email-wgong@codeaurora.org

wilc1000: Fix use of void pointer as a wrong struct type

ac_classify() expects a struct sk_buff* as its second argument, which is
a member of struct tx_complete_data. priv happens to be a pointer to
struct tx_complete_data, so passing it directly to ac_classify() leads
to wrong behaviour and occasional panics.

Since there is only one caller of wilc_wlan_txq_add_net_pkt and it
already knows the type behind this pointer, and the structure is already
in the header file, change the function signature to use the real type
instead of void* in order to prevent confusion.

Signed-off-by: Vsevolod Kozlov <zaba@mm.st>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YCQomJ1mO5BLxYOT@Vsevolods-Mini.lan

brcmsmac: Fix the spelling configation to configuration in the file d11.h

s/configation/configuration/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209232921.1255425-1-unixbhaskar@gmail.com

iwlwifi: bump FW API to 62 for AX devices

Start supporting API version 62 for AX devices.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210172142.8c2e4ebd947e.Id1be235baad632e9ba1c07590e62184fc2f07c04@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pnvm: implement reading PNVM from UEFI

We now support fetching the PNVM data from a UEFI variable.  Add the
code to read this variable first and use it.  If it's not available,
we fall back to reading the data from the filesystem, as before.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210211015026.289084803334.Ie234805047df3be84f4235f9dafaf4cdecf0db9a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pnvm: move file loading code to a separate function

In preparation to support loading the PNVM from UEFI, move the
function that loads the PNVM from the filesystem to a separate
function.  This will make it easier to try to load from both places
later on.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210172142.072aa2e8bbc5.Ib351ee5da47a4cee60d44e66d32d2f6bba6f3150@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pnvm: increment the pointer before checking the TLV

If the SKU_ID doesn't match, we don't increment the pointer and keep
checking the same TLV over and over again.

We need to increment the pointer in all situtations, namely if the TLV
is not a SKU_ID, if the SKU_ID matched or if the SKU_ID didn't match.
So we can increment the pointer already before checking for these
conditions to solve the problem.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210172142.de94d366f3ff.I9a5a54906cf0f4ec8af981d6066bfd771152ffb9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: define FW_RESET_TIMEOUT for clarity

Move fw reset timeout to a FW_RESET_TIMEOUT macro
for better readability.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210172142.f71c99f461ff.If32fe0afed277ec99ba0d7e2615c27a8a80a0d29@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pnvm: set the PNVM again if it was already loaded

When the interface goes up, we have already loaded the PNVM during
init, so we don't load it anymore.  But we still need to set the PNVM
values in the context so that the FW can load it again.

Call set_pnvm when the PNVM is already loaded and change the
trans_pcie implementation to accept a second call to set_pnvm when we
have already allocated and, in this case, only set the values without
allocating again.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210172142.622546a3566f.I659a8b9aa944d213c4ba446e142d74f3f6db9c64@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: global PM mode does not reset after FW crash

When The driver in D3 and FW crash happens, trans->system_pm_mode
is  not reset to IWL_PLAT_PM_MODE_DISABLED which causes the driver
not to send INIT conmmands and D3 resume fails.

This patch contains the fix for resetting trans->system_pm_mode to
IWL_PLAT_PM_MODE_DISABLED and D3 resume is successful.

Signed-off-by: Ravi Darsi <ravi.darsi@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210172142.ad170ad48409.Ifc6b10e8b3f235876af91d0e23e90b462d270eff@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: reduce the print severity of failing getting NIC temp

Currently, for all devices and families, failing getting the temp
from the fw is indicated in the log as ERR.
This is too severe for two reasons:
1. The driver has a fall back - and schedules the next temp
read immediately after failing to read temp from the fw.
2. The temp read implementation in the fw is different between
HWs, and on older devices the flow is a-sync and may timeout.

Reducing the print severity from ERR to WARN will allow to
track the issue if it will appear many times, but not frighten users
if it appears once.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210172142.dfd423b2b2ef.Icd576dc3e2e7174d3ed9c1c32f48ea0013699e72@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: get NVM later in the mvm_start flow

We don't need the NVM until fairly late in the flow and
since this flow will be split soon, get the NVM later to
unite it with the parts that really need it.
Gather all what needs the NVM into a function.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.bab0e65c4909.I789f3eb577b216ad1688269e036ce9fa4880f532@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlmvm: set properly NIC_NOT_ACK_ENABLED flag

The STA_CTXT_HE_NIC_NOT_ACK_ENABLED flag tells the firmware
whether *we* support ack-enabled.
So what should be checked is our *own* capability and not
the *peer's* capability.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.59f44e210096.I8f31968f6f7303255e212d869ca0131becd309aa@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove max_ht_ampdu_exponent config parameter

This always has the same value, since we don't have any
devices with different values; remove the parameter.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.50d11cbb073f.Ia44d022a4c549eb5fe0254fb20c62aa8d0bba634@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove max_vht_ampdu_exponent config parameter

This is not (or no longer) used, so remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.ed18d7c8e7b8.Ic3fdf7c8636f332e3d5ee5841b03bf85e3bc4855@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: Check ret code for iwl_mvm_load_nvm_to_nic

Return value of the iwl_mvm_load_nvm_to_nic func is not analyzed. If load
NVM to nic func fails and NVM is not loaded to fw properly, then fw may
behave badly and lead to some strange issue. This commit will analyze
return value and if load NVM to nic has failed, then the error code is
sent to the previous func, which will trigger WRT log collection.
iwl_fw_dbg_error_collect() func collects dump only if tri type is
FW_DBG_TRIGGER_ALIVE_TIMEOUT. But when Load NVM to nic function fails
trig_type is FW_DBG_TRIGGER_DRIVER. This commit also has code changes to
collect dump when trig_type is FW_DBG_TRIGGER_DRIVER.

Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.32998850192a.Ic58d08cb6944ca55e343ff0032c82cfa7821e588@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: don't check if CSA event is running before removing

We may want to remove it before it started (i.e. before the
actual switch time).

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Fixes: 58ddd9b6d194 ("iwlwifi: mvm: don't send a CSA command the firmware doesn't know")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.835db8987b8a.Ic6c5d28d744302db1bc6c4314bd3138ba472f834@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: Support SCAN_CFG_CMD version 5

Since the firmware support for internal station for auxiliary
activities, there is no need to configure an auxiliary station
as part of SCAN_CFG_CMD. Thus, this configuration was removed
from the corresponding structure.

Align the code accordingly.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.9b8da8408692.I7fe99d73cd67ffc817c2ef6af4c9932ce9fc50b2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: isolate the get nvm flow

This will soon be a bit more complicated. Take it out
to a function.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.431f31a86ea0.I9db96647eb9c7142051e26cd5be3f52c5ffc5534@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: simplify iwl_mvm_dbgfs_register

No need to pass the dbgfs_dir just to assign it to mvm.
Assign to mvm and then call iwl_mvm_dbgfs_register.

This is a preparation towards the addition of a delayed
op_mode_start flow.
This will allow to split the op_mode_start flow.
Registration to debugfs must happen after we register to
mac80211 and the registration to mac80211 will soon be
delayed in certain cases. In order not to have to remember
the debugfs_dir in a separate variable, just set it into
the mvm structure so that it can be usable later.

Declare mvm->debugfs_dir in the iwl_mvm structure even when
IWLWIFI_DEBUGFS isn't enabled to simplify the source code.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.a92ee491863d.I047923aa3598fbf4fb6fce2cdff75a4969fedd76@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: register to mac80211 last

All the actions that were taken after the registration can
be taken before the registration to mac80211.
This will help to defer part of the op_mode_mvm_start
function to a later stage in case the device is not
available.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.c03cc5db67c1.Ia928ca34d25a73d959a345ffbe4f1217c3f17394@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: acpi: add support for DSM RFI

BIOS provides RFI feature enable/disable state via WiFi DSM ACPI
object. By default the feature should be disabled.
The GUID for this feature is different from the one driver currently
uses, so need to provide a set of new definitions.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.242bfe368981.Iaccce1e2fa3986b174d0b08942aa4fbf8bb94a95@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: add RFI-M support

RF Interference Mitigation is a new feature targeted to handle the
problem of interference between DDR memory and WiFi. The role of
the driver is to configure FW with the table holding a mapping
between problematic channels/bands and the corresponding frequencies.

This patch adds RFI infrastructure and adds two debugfs hooks:
- send RFI configuration command (currently with a default table) which
  will reset feature in the FW
- read the table, used by the FW (which can be a subset of the table
  that driver sent).

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.2cea55a09bc7.I634b79795abad499ce442631d6672ffef8fc6d41@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi:mvm: Add support for version 2 of the LARI_CONFIG_CHANGE command.

Add support for version 2 of the LARI_CONFIG_CHANGE command.
this is needed to support UHB enable/disable from BIOS

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.8a0c951bfdea.I850f29d3ff3931388447bda635dfbc742ea1df61@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: don't crash when rx queues aren't allocated in interrupt

WARNING is better than crashing. Since this happened to me,
be on the safe side.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.d4651427fcda.I1bcecb73676d039e2521309c07fc6b6314a90546@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: correction of group-id once sending REPLY_ERROR

Once sending the REPLY_ERROR group ID is not set and this lead to
get it set to wrong value LONG_GROUP later in default handling

Fix this by checking the REPLY_ERROR and avoid changing the Group ID

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.82578caaea84.I0ca9cfdd4e656d2e88ee7696dd6baf4267e7cb52@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: add AX201 and AX211 radio modules for Ma devices

Add support for AX201 and AX211 radio modules, which we call HR2 and
GF, respectively.  These modules can be used with the Ma family of
devices and above.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.f8e3080ce633.I7377b421b031796730daf809c4024a3c3ef95fa8@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: add CDB bit to the device configuration parsing

Some new devices contain an extra bit in the CRF ID register to denote
that they support CDB.  Add definitions and macros to be able to
support it and add the "NO_CDB" to all existing entired.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.7b40184d9899.I3bb2cf9b9afb0457583f786dc52d4d1b1ad75ffc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: acpi: don't return valid pointer as an ERR_PTR

iwl_acpi_get_wifi_pkg() may return a valid pointer (meaning success),
while `tbl_rev` is invalid (equel to 1).
In this case, we will treat that as an error.
Subsequent "users" of this "error code" may either check for nonzero
(good; pointers are never zero) or negative
(bad; pointers may be "positive") fix that by splitting the if statement.
First check if IS_ERR(wifi_pkg) and then if tbl_rev != 0.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.1c8c4b58c932.I147373f6fd364606b0282af8d402c722eb917225@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: queue: add fake tx time point

In case we get TX sequence number out of range, trigger fake tx time
point to collect FW debug data.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.e098026e83ad.I8870fcbc504a74cab6a50134b3df1131d6da946d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove flags argument for nic_access

Since we no longer save interrupts, we no longer need the flags
argument here, remove it throughout.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.8de8fe6f9fff.If040b056d0e8c771c65ac5c29230f939354a142b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: declare support for triggered SU/MU beamforming feedback

The NIC supports this, so set the relevant bits in the HE PHY
capabilities.

Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.24212c1aac90.I82f6c1bdb9fe351ce46e8cc8ec6da221908dec45@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: dbg: add op_mode callback for collecting debug data.

The first use is collecting debug data when transport stops the device.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.d282d0a9ee7b.I9a0ad29f80daba8956a6aa077ba865e19b2150be@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: api: clean up some documentation/bits

Clean up some documentation references and some bits in the enums
to make the documentation more useful.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.941d963ceb88.I72a89c0161d7beab99bc3a90707796c2a63e4197@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: dbg: remove unsupported regions

In case user requested to register an unsupported regions,
remove it from active list and trigger list, this saves operational
driver memory and run time at collecting debug data.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.a0cc944040e8.I3ae37547452b39f8040428c21ed47bdc67ae8f71@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: Change Ma device ID

The Ma device ID needs to be 0x7E40 instead of 0x7E80.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.a97272169e3f.Ic4acfb3f7b4e9d7b49c9c0b9a31c9a305d4d9fcc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: when HW has rate offload don't look at control field

Control field is set by mac80211 only if case rate is not offloaded to
hw.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.f845c4387eed.I30c4d26698bae1f5f8c396da80a545baa145e2ad@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: NULLify pointers after free

Remember that those pointers have been freed by setting them
to NULL. Otherwise, we'd keep rxq pointing to random memory
which would prevent us from trying to re-allocate the Rx
resources if we call rx_alloc again.

Also, propagate the allocation failure to the caller of
iwl_pcie_nic_init so that we won't go further in the
start flow.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.996b400d2f1c.I630379c504644700322f57b259383ae0af8d1975@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: assign SAR table revision to the command later

The call to iwl_sar_geo_init() was moved to the end of the
iwl_mvm_sar_geo_init() function, after the table revision is assigned
to the FW command.  But the revision is only known after
iwl_sar_geo_init() is called, so we were always assigning zero to it.

Fix that by moving the assignment code after the iwl_sar_geo_init()
function is called.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 45acebf8d6a6 ("iwlwifi: fix sar geo table initialization")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.cef55ef3a065.If96c60f08d24c2262c287168a6f0dbd7cf0f8f5c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: remove useless iwl_mvm_resume_d3() function

This is called exactly once, a few lines down, so there's
no point in having the extra function.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.1ef80bf3008c.I0b5349530182b5616a4149dd596f95aa54ea724c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: enhance a print in CSA flows

Add the count and the mode to the modify CSA flow.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.361bc0f024ef.I904f269858b3123b7d6532f049c7f92b63fb8807@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: send stored PPAG command instead of local

Some change conflicts apparently cause a confusion between a local
variable being used to send the PPAG command and the introduction of a
union for this command.  Most parts of the local command were never
copied from the stored data, so the FW was getting garbage in the
tables instead of getting valid values.

Fix this by completely removing the local and using only the union
that we have stored in fwrt.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: f2134f66f40e ("iwlwifi: acpi: support ppag table command v2")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.d090e0301023.I7d57f4d7da9a3297734c51cf988199323c76916d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: store PPAG enabled/disabled flag properly

When reading the PPAG table from ACPI, we should store everything in
our fwrt structure, so it can be accessed later.  But we had a local
ppag_table variable in the function and were erroneously storing the
enabled/disabled flag in it instead of storing it in the fwrt.  Fix
this by removing the local variable and storing everything directly in
fwrt.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: f2134f66f40e ("iwlwifi: acpi: support ppag table command v2")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.889862e6d393.I8b894c1b2b3fe0ad2fb39bf438273ea47eb5afa4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: mvm: fix the type we use in the PPAG table validity checks

The value we receive from ACPI is a long long unsigned integer but the
values should be treated as signed char.  When comparing the received
value with ACPI_PPAG_MIN_LB/HB, we were doing an unsigned comparison,
so the negative value would actually be treated as a very high number.

To solve this issue, assign the value to our table of s8's before
making the comparison, so the value is already converted when we do
so.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.b0ec69f312bc.If77fd9c61a96aa7ef2ac96d935b7efd7df502399@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: acpi: fix PPAG table sizes

We were erroneously adding 3 extra values to the table size
calculation, when we should actually add only a 2 (one for the domain
type and one for the enabled/disabled flag).  Fix this for both
revisions we support.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.9d037b8f5098.I3c88af130d9e270517c8bac8eb02e11f817fe959@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: don't disable interrupts for reg_lock

The only thing we do touching the device in hard interrupt context
is, at most, writing an interrupt ACK register, which isn't racing
in with anything protected by the reg_lock.

Thus, avoid disabling interrupts here for potentially long periods
of time, particularly long periods have been observed with dumping
of firmware memory (leading to lockup warnings on some devices.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.da916ab91298.I064c3e7823b616647293ed97da98edefb9ce9435@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: add a few missing entries for So with Hr

Some devices were missing from the So with Hr section.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210135352.71da7ce27261.I0d96fe7b799527c49f1270ddf9acdb152bdd4841@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: dbg: Mark ucode tlv data as const

The ucode TLV data may be read-only and should be treated as const
pointers, but currently a few code forcibly cast to the writable
pointer unnecessarily.  This gave developers a wrong impression as if
it can be modified, resulting in crashing regressions already a couple
of times.

This patch adds the const prefix to those cast pointers, so that such
attempt can be caught more easily in future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20210112132449.22243-3-tiwai@suse.de
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: add new cards for So and Qu family

add few PCI ID'S for So with Hr and Qu with Hr in AX family.

Cc: stable@vger.kernel.org
Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210206130110.6f0c1849f7dc.I647b4d22f9468c2f34b777a4bfa445912c6f04f0@changeid

ath11k: fix a locking bug in ath11k_mac_op_start()

This error path leads to a Smatch warning:

drivers/net/wireless/ath/ath11k/mac.c:4269 ath11k_mac_op_start()
error: double unlocked '&ar->conf_mutex' (orig line 4251)

We're not holding the lock when we do the "goto err;" so it leads to a
double unlock.  The fix is to hold the lock for a little longer.

Fixes: c83c500b55b6 ("ath11k: enable idle power save mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[kvalo@codeaurora.org: move also rcu_assign_pointer() call]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YBk4GoeE+yc0wlJH@mwanda

rtlwifi: rtl8821ae: phy: Simplify bool comparison

Fix the following coccicheck warning:

./drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:3853:7-17:
WARNING: Comparison of 0/1 to bool variable.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1612840381-109714-1-git-send-email-jiapeng.chong@linux.alibaba.com

rtlwifi: rtl8192se: Simplify bool comparison

Fix the follow coccicheck warnings:

./drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c:2305:6-27:
WARNING: Comparison of 0/1 to bool variable.

./drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c:1376:5-26:
WARNING: Comparison of 0/1 to bool variable.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1612839264-85773-1-git-send-email-jiapeng.chong@linux.alibaba.com

brcmfmac: add support for CQM RSSI notifications

Add support for CQM RSSI measurement reporting and advertise the
NL80211_EXT_FEATURE_CQM_RSSI_LIST feature. This enables a userspace
supplicant such as iwd to be notified of changes in the RSSI for roaming
and signal monitoring purposes.

Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210208125738.3546557-1-alsi@bang-olufsen.dk

wil6210: Add Support for Extended DMG MCS 12.1

FW reports Tx/Rx extended MCS 12.1 to driver as "26". Driver will
convert this into base MCS 7 + EXTENDED_SC_DMG flag so kernel can do
the correct phy rate conversion. Also add log prints to print "12.1"
instead of "26" for extended MCS.

Signed-off-by: Max Chen <mxchen@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1609977050-7089-3-git-send-email-mxchen@codeaurora.org

ath10k: Add new debug level for sta related logs

Add new level ATH10K_DBG_STA debug_mask for printing
sta related logs. This will be useful to check the
debug logs of connection and changes related to
station.

Tested-on: QCA9984 hw1.0 PCI 10.4-3.9.0.2-00021

Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1612463738-16542-1-git-send-email-tamizhr@codeaurora.org

carl9170: fix struct alignment conflict

Multiple structures in the carl9170 driver have alignment
impossible alignment constraints that gcc warns about when
building with 'make W=1':

drivers/net/wireless/ath/carl9170/fwcmd.h:243:2: warning: alignment 1 of 'union <anonymous>' is less than 4 [-Wpacked-not-aligned]
drivers/net/wireless/ath/carl9170/wlan.h:373:1: warning: alignment 1 of 'struct ar9170_rx_frame_single' is less than 2 [-Wpacked-not-aligned]

In the carl9170_cmd structure, multiple members that have an explicit
alignment requirement of four bytes are added into a union with explicit
byte alignment, but this in turn is part of a structure that also has
four-byte alignment.

In the wlan.h header, multiple structures contain a ieee80211_hdr member
that is required to be two-byte aligned to avoid alignmnet faults when
processing network headers, but all members are forced to be byte-aligned
using the __packed tag at the end of the struct definition.

In both cases, leaving out the packing does not change the internal
layout of the structure but changes the alignment constraint of the
structure itself.

Change all affected structures to only apply packing where it does
not violate the alignment requirement of the contained structure.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210204162926.3262598-1-arnd@kernel.org

wcn36xx: del BA session on TX stop

Deleting BA session was not correcly performed, causing communication
issues with APs that dynamically stop/start new BA sessions.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1611328304-1010-1-git-send-email-loic.poulain@linaro.org

ath11k: Update tx descriptor search index properly

Tx descriptor search index field should be updated with hw peer id
and not by AST Hash as per the HW/FW recommendation. Incorrect search
index causes throughput degradation in all scenario for all the
platforms. so updated the search index field with hw peer id, which
is a common change applicable for all the platforms. Also no need of these
configuration for non station type. seen 10% throughput increase in WDS
traffic with this change.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1612410960-9120-1-git-send-email-periyasa@codeaurora.org

ath10k: Fix lockdep assertion warning in ath10k_sta_statistics

ath10k_debug_fw_stats_request just be called with conf_mutex held,
otherwise the following warning is seen when lock debugging is enabled:

WARNING: CPU: 0 PID: 793 at drivers/net/wireless/ath/ath10k/debug.c:357 ath10k_debug_fw_stats_request+0x12c/0x133 [ath10k_core]
Modules linked in: snd_hda_codec_hdmi designware_i2s snd_hda_intel snd_intel_dspcfg snd_hda_codec i2c_piix4 snd_hwdep snd_hda_core acpi_als kfifo_buf industrialio snd_soc_max98357a snd_soc_adau7002 snd_soc_acp_da7219mx98357_mach snd_soc_da7219 acp_audio_dma ccm xt_MASQUERADE fuse ath10k_pci ath10k_core lzo_rle ath lzo_compress mac80211 zram cfg80211 r8152 mii joydev
CPU: 0 PID: 793 Comm: wpa_supplicant Tainted: G        W         5.10.9 #5
Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.104.0 09/05/2019
RIP: 0010:ath10k_debug_fw_stats_request+0x12c/0x133 [ath10k_core]
Code: 1e bb a1 ff ff ff 4c 89 ef 48 c7 c6 d3 31 2e c0 89 da 31 c0 e8 bd f8 ff ff 89 d8 eb 02 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b e9 04 ff ff ff 0f 1f 44 00 00 55 48 89 e5 41 56 53 48 89 fb
RSP: 0018:ffffb2478099f7d0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9e432700cce0 RCX: 11c85cfd6b8e3b00
RDX: ffff9e432700cce0 RSI: ffff9e43127c5668 RDI: ffff9e4318deddf0
RBP: ffffb2478099f7f8 R08: 0000000000000002 R09: 00000003fd7068cc
R10: ffffffffc01b2749 R11: ffffffffc029efaf R12: ffff9e432700c000
R13: ffff9e43127c33e0 R14: ffffb2478099f918 R15: ffff9e43127c33e0
FS:  00007f7ea48e2740(0000) GS:ffff9e432aa00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000059aa799ddf38 CR3: 0000000118de2000 CR4: 00000000001506f0
Call Trace:
 ath10k_sta_statistics+0x4d/0x270 [ath10k_core]
 sta_set_sinfo+0x1be/0xaec [mac80211]
 ieee80211_get_station+0x58/0x76 [mac80211]
 rdev_get_station+0xf1/0x11e [cfg80211]
 nl80211_get_station+0x7f/0x146 [cfg80211]
 genl_rcv_msg+0x32e/0x35e
 ? nl80211_stop_ap+0x19/0x19 [cfg80211]
 ? nl80211_get_station+0x146/0x146 [cfg80211]
 ? genl_rcv+0x19/0x36
 ? genl_rcv+0x36/0x36
 netlink_rcv_skb+0x89/0xfb
 genl_rcv+0x28/0x36
 netlink_unicast+0x169/0x23b
 netlink_sendmsg+0x38a/0x402
 sock_sendmsg+0x72/0x76
 ____sys_sendmsg+0x153/0x1cc
 ? copy_msghdr_from_user+0x5d/0x85
 ___sys_sendmsg+0x7c/0xb5
 ? lock_acquire+0x181/0x23d
 ? syscall_trace_enter+0x15e/0x160
 ? find_held_lock+0x3d/0xb2
 ? syscall_trace_enter+0x15e/0x160
 ? sched_clock_cpu+0x15/0xc6
 __sys_sendmsg+0x62/0x9a
 do_syscall_64+0x43/0x55
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 4913e675630e ("ath10k: enable rx duration report default for wmi tlv")
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210202144033.1.I9e556f9fb1110d58c31d04a8a1293995fb8bb678@changeid

ath10k: Fix suspicious RCU usage warning in ath10k_wmi_tlv_parse_peer_stats_info()

The ieee80211_find_sta_by_ifaddr call in
ath10k_wmi_tlv_parse_peer_stats_info must be called while holding the
RCU read lock. Otherwise, the following warning will be seen when RCU
usage checking is enabled:

=============================
WARNING: suspicious RCU usage
5.10.3 #8 Tainted: G        W
-----------------------------
include/linux/rhashtable.h:594 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
no locks held by ksoftirqd/1/16.

stack backtrace:
CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G        W         5.10.3 #8
Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.104.0 09/05/2019
Call Trace:
 dump_stack+0xab/0x115
 sta_info_hash_lookup+0x71/0x1e9 [mac80211]
 ? lock_is_held_type+0xe6/0x12f
 ? __kasan_kmalloc+0xfb/0x112
 ieee80211_find_sta_by_ifaddr+0x12/0x61 [mac80211]
 ath10k_wmi_tlv_parse_peer_stats_info+0xbd/0x10b [ath10k_core]
 ath10k_wmi_tlv_iter+0x8b/0x1a1 [ath10k_core]
 ? ath10k_wmi_tlv_iter+0x1a1/0x1a1 [ath10k_core]
 ath10k_wmi_tlv_event_peer_stats_info+0x103/0x13b [ath10k_core]
 ath10k_wmi_tlv_op_rx+0x722/0x80d [ath10k_core]
 ath10k_htc_rx_completion_handler+0x16e/0x1d7 [ath10k_core]
 ath10k_pci_process_rx_cb+0x116/0x22c [ath10k_pci]
 ? ath10k_htc_process_trailer+0x332/0x332 [ath10k_core]
 ? _raw_spin_unlock_irqrestore+0x34/0x61
 ? lockdep_hardirqs_on+0x8e/0x12e
 ath10k_ce_per_engine_service+0x55/0x74 [ath10k_core]
 ath10k_ce_per_engine_service_any+0x76/0x84 [ath10k_core]
 ath10k_pci_napi_poll+0x49/0x141 [ath10k_pci]
 net_rx_action+0x11a/0x347
 __do_softirq+0x2d3/0x539
 run_ksoftirqd+0x4b/0x86
 smpboot_thread_fn+0x1d0/0x2ab
 ? cpu_report_death+0x7f/0x7f
 kthread+0x189/0x191
 ? cpu_report_death+0x7f/0x7f
 ? kthread_blkcg+0x31/0x31
 ret_from_fork+0x22/0x30

Fixes: 0f7cb26830a6e ("ath10k: add rx bitrate report for SDIO")
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210202134451.1.I0d2e83c42755671b7143504b62787fd06cd914ed@changeid

Merge tag 'mt76-for-kvalo-2021-01-29' of https://github.com/nbd168/wireless

mt76 patches for 5.12

* add new mt7921e driver
* factor out common code shared between 7615/7663 and 7921
* performance optimizations
* 7915 dbdc fixes
* 802.11 encap offload support
* support for multiple pcie gen1 host interfaces on 7915
* 7915 testmode support
* bugfixes
* testmode support enhancements
* endian fixes
* 7915 txbf support

Merge tag 'iwlwifi-next-for-kalle-2021-02-05' of git://git./linux/kernel/git/iwlwifi/iwlwifi-next

iwlwifi patches intended for v5.12

* Check FW notification sizes for robustness;
* Improvements in the NAPI implementation;
* Implement a workaround for CCA-EXT;
* Add new FW API support;
* Fix a CSA bug;
* Implement PHY integration version parsing;
* A bit of refactoring;
* One more CSA bug fix, this time in the AP side;
* Support for new So devices and a bit of reorg;
* Per Platform Antenna Gain (PPAG) fixes and improvements;
* Improvements in the debug framework;
* Some other clean-ups and small fixes.

# gpg: Signature made Fri 05 Feb 2021 12:04:21 PM EET using RSA key ID 1A3CC5FA
# gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>"
# gpg:                 aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"

ssb: Use true and false for bool variable

Fix the following coccicheck warnings:

./include/linux/ssb/ssb_driver_gige.h:89:8-9: WARNING: return of 0/1 in
function 'ssb_gige_one_dma_at_once' with return type bool.

./include/linux/ssb/ssb_driver_gige.h:79:8-9: WARNING: return of 0/1 in
function 'ssb_gige_have_roboswitch' with return type bool.

./include/linux/ssb/ssb_driver_gige.h:182:8-9: WARNING: return of 0/1 in
function 'ssb_gige_must_flush_posted_writes' with return type bool.

./include/linux/ssb/ssb_driver_gige.h:178:8-9: WARNING: return of 0/1 in
function 'ssb_gige_one_dma_at_once' with return type bool.

./include/linux/ssb/ssb_driver_gige.h:174:8-9: WARNING: return of 0/1 in
function 'ssb_gige_have_roboswitch' with return type bool.

./include/linux/ssb/ssb_driver_gige.h:170:8-9: WARNING: return of 0/1 in
function 'ssb_gige_is_rgmii' with return type bool.

./include/linux/ssb/ssb_driver_gige.h:162:8-9: WARNING: return of 0/1 in
function 'pdev_is_ssb_gige_core' with return type bool.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1612508199-92282-1-git-send-email-jiapeng.chong@linux.alibaba.com

mwl8k: fix alignment constraints

sturct mwl8k_dma_data contains a ieee80211_hdr structure, which is required to
have at least two byte alignment, and this conflicts with the __packed
attribute:

vers/net/wireless/marvell/mwl8k.c:811:1: warning: alignment 1 of 'struct mwl8k_dma_data' is less than 2 [-Wpacked-not-aligned]

Mark mwl8k_dma_data itself as having two-byte alignment to ensure the
inner structure is properly aligned.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210204162813.3159319-1-arnd@kernel.org

wl3501: fix alignment constraints

struct wl3501_80211_tx_hdr contains a ieee80211_hdr structure, which is
required to have at least two byte alignment, and this conflicts with
the __packed attribute:

wireless/wl3501.h:553:1: warning: alignment 1 of 'struct wl3501_80211_tx_hdr' is less than 2 [-Wpacked-not-aligned]

Mark wl3501_80211_tx_hdr itself as having two-byte alignment to ensure the
inner structure is properly aligned.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210204162653.3113749-1-arnd@kernel.org

rt2800usb: add Sweex LW163V2 id's

Add support for Sweex LW163V2 device.

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210204101902.199590-1-stf_xl@wp.pl

iwlegacy: 4965-mac: Simplify the calculation of variables

Fix the following coccicheck warnings:

./drivers/net/wireless/intel/iwlegacy/4965-mac.c:2596:54-56: WARNING !A
|| A && B is equivalent to !A || B.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1612425608-40450-1-git-send-email-jiapeng.chong@linux.alibaba.com

rt2x00: remove duplicate word and fix typo in comment

remove duplicate word 'we' in comment
change 'then' to 'than' in comment

Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210204005119.18060-1-samirweng1979@163.com

rsi: remove redundant assignment

INVALID_QUEUE has been used as a return value,it is not necessary to
assign it to q_num,so just return INVALID_QUEUE.

Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210203062717.1228-1-samirweng1979@163.com

mwl8k: assign value when defining variables

define refilled and then assign value to it, which should do
that at the same time.

Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210203061625.588-1-samirweng1979@163.com

wl1251: cmd: remove redundant assignment

-ENOMEM has been used as a return value,it is not necessary to
assign it, and if kzalloc fail,not need free it,so just return
-ENOMEM when kzalloc fail.

Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210203060306.2832-1-samirweng1979@163.com

mwifiex: Report connected BSS with cfg80211_connect_bss()

When a network is moved or reconfigured on the different channel, there
can be multiple BSSes with the same BSSID and SSID in scan result
before the old one expires. Then, it can cause cfg80211_connect_result
to map current_bss to a bss with the wrong channel.

Let mwifiex_cfg80211_assoc return the selected BSS and then the caller
can report it cfg80211_connect_bss.

Signed-off-by: Yen-lin Lai <yenlinlai@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210201070649.1667209-1-yenlinlai@chromium.org

rtl8xxxu: remove unused assignment value

at first, ret was assigned to zero, but later assigned to
a funciton,so the assignment to zero is no use, which can
simple be removed instead.

Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210130072310.17252-1-samirweng1979@163.com

libertas: remove redundant initialization of variable ret

The variable ret is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210128162202.642848-1-colin.king@canonical.com

atmel: at76c50x: use DEFINE_MUTEX() for mutex lock

mutex lock can be initialized automatically with DEFINE_MUTEX()
rather than explicitly calling mutex_init().

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201224132456.31341-1-zhengyongjun3@huawei.com

brcmsmac: fix alignment constraints

sturct d11txh contains a ieee80211_rts structure, which is required to
have at least two byte alignment, and this conflicts with the __packed
attribute:

drivers/net/wireless/broadcom/brcm80211/brcmsmac/d11.h:786:1: warning: alignment 1 of 'struct d11txh' is less than 2 [-Wpacked-not-aligned]

Mark d11txh itself as having two-byte alignment to ensure the
inner structure is properly aligned.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210204162852.3219572-1-arnd@kernel.org

brcmfmac: Add DMI nvram filename quirk for Voyo winpad A15 tablet

The Voyo winpad A15 tablet contains quite generic names in the sys_vendor
and product_name DMI strings, without this patch brcmfmac will try to load:
rcmfmac4330-sdio.To be filled by O.E.M.-To be filled by O.E.M..txt
as nvram file which is a bit too generic.

Add a DMI quirk so that a unique and clearly identifiable nvram file name
is used on the Voyo winpad A15 tablet.

While preparing a matching linux-firmware update I noticed that the nvram
is identical to the nvram used on the Prowise-PT301 tablet, so the new DMI
quirk entry simply points to the already existing Prowise-PT301 nvram file.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210129171413.139880-2-hdegoede@redhat.com

brcmfmac: Add DMI nvram filename quirk for Predia Basic tablet

The Predia Basic tablet contains quite generic names in the sys_vendor and
product_name DMI strings, without this patch brcmfmac will try to load:
brcmfmac43340-sdio.Insyde-CherryTrail.txt as nvram file which is a bit
too generic.

Add a DMI quirk so that a unique and clearly identifiable nvram file name
is used on the Predia Basic tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210129171413.139880-1-hdegoede@redhat.com

rtw88: 8821c: support RFE type2 wifi NIC

RFE type2 is a new NIC which has one RF antenna shares with BT.
Update phy parameter to verstion V57 to allow initial procedure
to load extra AGC table for sharing antenna NIC.

Signed-off-by: Guo-Feng Fan <vincent_fann@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210202055012.8296-4-pkshih@realtek.com

rtw88: 8821c: Correct CCK RSSI

Incorrect CCK RSSI may cause periodically scan from upper layer.

8821c phy status does NOT has actual value of CCK power. It provides only
lna and vga index. Driver have to use these indexes to calculate
actual RSSI.

Signed-off-by: Guo-Feng Fan <vincent_fann@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210202055012.8296-3-pkshih@realtek.com

rtw88: coex: 8821c: correct antenna switch function

This patch fixes a defect that uses incorrect function to access
registers. Use 8 and 32 bit access function to access 8 and 32 bit long
data respectively.

Signed-off-by: Guo-Feng Fan <vincent_fann@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210202055012.8296-2-pkshih@realtek.com

rtlwifi: rtl8192se: remove redundant initialization of variable rtstatus

The variable rtstatu is being initialized with a value that is never
read and it is being updated later with a new value.  The initialization
is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210128171048.644669-1-colin.king@canonical.com

rtlwifi: use tasklet_setup to initialize rx_work_tasklet

In commit d3ccc14dfe95 most of the tasklets in this driver was
updated to the new API. However for the rx_work_tasklet only the
type of the callback was changed from
  void _rtl_rx_work(unsigned long data)
to
  void _rtl_rx_work(struct tasklet_struct *t).

The initialization of rx_work_tasklet was still open-coded and the
function pointer just cast into the old type, and hence nothing sets
rx_work_tasklet.use_callback = true and the callback was still called as

  t->func(t->data);

with uninitialized/zero t->data.

Commit 6b8c7574a5f8 changed the casting of _rtl_rx_work a bit and
initialized t->data to a pointer to the tasklet cast to an unsigned
long.

This way calling t->func(t->data) might actually work through all the
casting, but it still doesn't update the code to use the new tasklet
API.

Let's use the new tasklet_setup to initialize rx_work_tasklet properly
and set rx_work_tasklet.use_callback = true so that the callback is
called as

  t->callback(t);

without all the casting.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210126171550.3066-1-kernel@esmil.dk