Neil Horman [Tue, 26 Jul 2011 06:05:38 +0000 (06:05 +0000)]
net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared
[ Upstream commit
550fd08c2cebad61c548def135f67aba284c6162 ]
After the last patch, We are left in a state in which only drivers calling
ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real
hardware call ether_setup for their net_devices and don't hold any state in
their skbs. There are a handful of drivers that violate this assumption of
course, and need to be fixed up. This patch identifies those drivers, and marks
them as not being able to support the safe transmission of skbs by clearning the
IFF_TX_SKB_SHARING flag in priv_flags
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Karsten Keil <isdn@linux-pingi.de>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Patrick McHardy <kaber@trash.net>
CC: Krzysztof Halasa <khc@pm.waw.pl>
CC: "John W. Linville" <linville@tuxdriver.com>
CC: Greg Kroah-Hartman <gregkh@suse.de>
CC: Marcel Holtmann <marcel@holtmann.org>
CC: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Neil Horman [Tue, 26 Jul 2011 06:05:37 +0000 (06:05 +0000)]
net: add IFF_SKB_TX_SHARED flag to priv_flags
[ Upstream commit
d8873315065f1f527c7c380402cf59b1e1d0ae36 ]
Pktgen attempts to transmit shared skbs to net devices, which can't be used by
some drivers as they keep state information in skbs. This patch adds a flag
marking drivers as being able to handle shared skbs in their tx path. Drivers
are defaulted to being unable to do so, but calling ether_setup enables this
flag, as 90% of the drivers calling ether_setup touch real hardware and can
handle shared skbs. A subsequent patch will audit drivers to ensure that the
flag is set properly
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Jiri Pirko <jpirko@redhat.com>
CC: Robert Olsson <robert.olsson@its.uu.se>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Alexey Dobriyan <adobriyan@gmail.com>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Zoltan Kiss [Sun, 24 Jul 2011 13:09:30 +0000 (13:09 +0000)]
IPv4: Send gratuitous ARP for secondary IP addresses also
[ Upstream commit
b76d0789c92a816a5539dc14232a700b8d62a53a ]
If a device event generates gratuitous ARP messages, only primary
address is used for sending. This patch iterates through the whole
list. Tested with 2 IP addresses configuration on bonding interface.
Signed-off-by: Zoltan Kiss <schaman@sch.bme.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eric Dumazet [Fri, 29 Jul 2011 19:22:42 +0000 (19:22 +0000)]
sch_sfq: fix sfq_enqueue()
[ Upstream commit
e1738bd9cecc5c867b0e2996470c1ff20f66ba79 ]
commit
8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals)
forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a
packet (from another flow) was dropped, leading to various problems.
With help from Michal Soltys and Michal Pokrywka, who did a bisection.
Bugzilla ref: https://bugzilla.kernel.org/show_bug.cgi?id=39372
Debian ref: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631945
Reported-by: Lucas Bocchi <lucas.bocchi@gmail.com>
Reported-and-bisected-by: Michal Pokrywka <wolfmoon@o2.pl>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Michal Soltys <soltys@ziu.info>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Julia Lawall [Thu, 28 Jul 2011 02:46:03 +0000 (02:46 +0000)]
drivers/net/niu.c: adjust array index
[ Upstream commit
956837f7c954443f426a82ba6f17b33488cf9a0c ]
Convert array index from the loop bound to the loop index.
A simplified version of the semantic patch that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e1,e2,ar;
@@
for(e1 = 0; e1 < e2; e1++) { <...
ar[
- e2
+ e1
]
...> }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Julia Lawall [Thu, 28 Jul 2011 02:46:01 +0000 (02:46 +0000)]
net: adjust array index
[ Upstream commit
a1889c0d2039a53ae04abb9f20c62500bd312bf3 ]
Convert array index from the loop bound to the loop index.
A simplified version of the semantic patch that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e1,e2,ar;
@@
for(e1 = 0; e1 < e2; e1++) { <...
ar[
- e2
+ e1
]
...> }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Horman [Thu, 19 May 2011 12:32:57 +0000 (21:32 +0900)]
IPVS: Free resources on module removal
[ Upstream commit
7676e345824f162191b1fe2058ad948a6cf91c20 ]
This resolves a panic on module removal.
Reported-by: Dave Jones <davej@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Julian Anastasov [Mon, 8 Aug 2011 05:20:20 +0000 (22:20 -0700)]
ipv4: fix the reusing of routing cache entries
[ Upstream commit
d547f727df86059104af2234804fdd538e112015 ]
compare_keys and ip_route_input_common rely on
rt_oif for distinguishing of input and output routes
with same keys values. But sometimes the input route has
also same hash chain (keyed by iif != 0) with the output
routes (keyed by orig_oif=0). Problem visible if running
with small number of rhash_entries.
Fix them to use rt_route_iif instead. By this way
input route can not be returned to users that request
output route.
The patch fixes the ip_rt_bug errors that were
reported in ip_local_out context, mostly for 255.255.255.255
destinations.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bill Sommerfeld [Tue, 19 Jul 2011 15:22:33 +0000 (15:22 +0000)]
ipv4: Constrain UFO fragment sizes to multiples of 8 bytes
[ Upstream commit
d9be4f7a6f5a8da3133b832eca41c3591420b1ca ]
Because the ip fragment offset field counts 8-byte chunks, ip
fragments other than the last must contain a multiple of 8 bytes of
payload. ip_ufo_append_data wasn't respecting this constraint and,
depending on the MTU and ip option sizes, could create malformed
non-final fragments.
Google-Bug-Id: 5009328
Signed-off-by: Bill Sommerfeld <wsommerfeld@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David S. Miller [Fri, 22 Jul 2011 13:22:10 +0000 (06:22 -0700)]
icmp: Fix regression in nexthop resolution during replies.
[ Upstream commit
415b3334a21aa67806c52d1acf4e72e14f7f402f ]
icmp_route_lookup() uses the wrong flow parameters if the reverse
session route lookup isn't used.
So do not commit to the re-decoded flow until we actually make a
final decision to use a real route saved in 'rt2'.
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eric Dumazet [Tue, 9 Aug 2011 06:44:00 +0000 (23:44 -0700)]
ipv6: make fragment identifications less predictable
[ Backport of upstream commit
87c48fa3b4630905f98268dde838ee43626a060c ]
Fernando Gont reported current IPv6 fragment identification generation
was not secure, because using a very predictable system-wide generator,
allowing various attacks.
IPv4 uses inetpeer cache to address this problem and to get good
performance. We'll use this mechanism when IPv6 inetpeer is stable
enough in linux-3.1
For the time being, we use jhash on destination address to provide less
predictable identifications. Also remove a spinlock and use cmpxchg() to
get better SMP performance.
Reported-by: Fernando Gont <fernando@gont.com.ar>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clemens Ladisch [Thu, 4 Aug 2011 14:17:42 +0000 (16:17 +0200)]
ALSA: snd-usb: Accept UAC2 FORMAT_TYPE descriptors with bLength > 6
commit
824818b148db42173446707df4cbd61cd7133272 upstream.
The Focusrite Scarlett 18i6 USB has them that way, which is probably a
bug. Anyway, the driver should simply ignore this fact.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Nicolai Krakowiak <nicolai.krakowiak@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Daniel Mack [Thu, 4 Aug 2011 13:56:28 +0000 (15:56 +0200)]
ALSA: snd-usb: operate on given mixer interface only
commit
1faa5d07a93fc5b0a4a5254fc940a79e20b55540 upstream.
When creating the mixers for an USB audio device, the current code looks
at the host interface stored in mixer->chip->ctrl_if. Change this and
rather keep a local pointer to the interface that was given when
snd_usb_create_mixer() was called.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Nicolai Krakowiak <nicolai.krakowiak@gmail.com>
Reported-by: Lean-Yves LENHOF <jean-yves@lenhof.eu.org>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nicolai Krakowiak [Thu, 4 Aug 2011 13:56:27 +0000 (15:56 +0200)]
ALSA: snd-usb: avoid dividing by zero on invalid input
commit
60c961a9e1ed879a4d151df6076bf1203f595f73 upstream.
Signed-off-by: Nicolai Krakowiak <nicolai.krakowiak@gmail.com>
Acked-by: Daniel Mack <zonque@gmail.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Daniel Mack [Sat, 6 Aug 2011 07:13:08 +0000 (09:13 +0200)]
ALSA: snd-usb-caiaq: Fix keymap for RigKontrol3
commit
f4389489b5cbe60b3441869c68bb4afe760969c4 upstream.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Renato <naretobh@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Takashi Iwai [Mon, 8 Aug 2011 10:24:46 +0000 (12:24 +0200)]
ALSA: timer - Fix Oops at closing slave timer
commit
0584ffa548b6e59aceb027112f23a55f0133400e upstream.
A slave-timer instance has no timer reference, and this results in
NULL-dereference at stopping the timer, typically called at closing
the device.
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=40682
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Wolfram Sang [Tue, 2 Aug 2011 17:42:19 +0000 (19:42 +0200)]
ASoC: sgtl5000: fix cache handling
commit
151798f872d6b386d82cd1707ad703e981fef8f2 upstream.
Cache handling in this driver is broken. The chip has 16-bit registers, yet the
register numbers also increase by 2 per register, i.e. there are only
even-numbered registers. The cache in this driver, though, simply increments
register numbers, so it does need some mapping as seen in
sgtl5000_restore_regs(), note the '>> 1':
snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL,
cache[SGTL5000_CHIP_LINREG_CTRL >> 1]);
That, of course, won't work with snd_soc_update_bits(). (Thus, we won't even
notice the missing register 0x1c in the default regs which shifted all follwing
registers to wrong values.) Noticed on the MX28EVK where enabling the regulators
simply locked up the chip.
Refactor the routines and use a properly sized default_regs array which matches
the register layout of the underlying chip, i.e. create a truly flat cache.
This also saves some code which should make up for the bigger array a little.
When soc-core will somewhen have another cache type which handles a step size,
this conversion will also ease the transition.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Dong Aisheng <b29396@freescale.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jeff Layton [Fri, 5 Aug 2011 14:28:01 +0000 (10:28 -0400)]
cifs: convert prefixpath delimiters in cifs_build_path_to_root
commit
f9e8c45002cacad536b338dfa9e910e341a49c31 upstream.
Regression from 2.6.39...
The delimiters in the prefixpath are not being converted based on
whether posix paths are in effect. Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=727834
Reported-and-Tested-by: Iain Arnell <iarnell@gmail.com>
Reported-by: Patrick Oltmann <patrick.oltmann@gmx.net>
Cc: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jeff Layton [Fri, 5 Aug 2011 13:02:40 +0000 (09:02 -0400)]
cifs: cope with negative dentries in cifs_get_root
commit
80975d21aae2136ccae1ce914a1602dc1d8b0795 upstream.
The loop around lookup_one_len doesn't handle the case where it might
return a negative dentry, which can cause an oops on the next pass
through the loop. Check for that and break out of the loop with an
error of -ENOENT if there is one.
Fixes the panic reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=727927
Reported-by: TR Bentley <home@trarbentley.net>
Reported-by: Iain Arnell <iarnell@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavel Shilovsky [Wed, 3 Aug 2011 19:12:18 +0000 (23:12 +0400)]
CIFS: Fix missing a decrement of inFlight value
commit
0193e072268fe62c4b19ad4b05cd0d4b23c43bb9 upstream.
if we failed on getting mid entry in cifs_call_async.
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Corentin Chary [Fri, 1 Jul 2011 09:34:38 +0000 (11:34 +0200)]
asus-wmi: return proper value in store_cpufv()
commit
3df5fdadf6400373a696bb14e27d4771e5f6afb3 upstream.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Corentin Chary [Fri, 1 Jul 2011 09:34:26 +0000 (11:34 +0200)]
asus-wmi: fix hwmon/pwm1
commit
49979d091d1847823c064301da1ec173619ddd92 upstream.
The code was completly broken, and should never had been sent
to the kernel. That's what happens when you write code without
hardware to test it.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David S. Miller [Thu, 4 Aug 2011 03:50:44 +0000 (20:50 -0700)]
net: Compute protocol sequence numbers and fragment IDs using MD5.
Computers have become a lot faster since we compromised on the
partial MD4 hash which we use currently for performance reasons.
MD5 is a much safer choice, and is inline with both RFC1948 and
other ISS generators (OpenBSD, Solaris, etc.)
Furthermore, only having 24-bits of the sequence number be truly
unpredictable is a very serious limitation. So the periodic
regeneration and 8-bit counter have been removed. We compute and
use a full 32-bit sequence number.
For ipv6, DCCP was found to use a 32-bit truncated initial sequence
number (it needs 43-bits) and that is fixed here as well.
Reported-by: Dan Kaminsky <dan@doxpara.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David S. Miller [Thu, 4 Aug 2011 02:45:10 +0000 (19:45 -0700)]
crypto: Move md5_transform to lib/md5.c
We are going to use this for TCP/IP sequence number and fragment ID
generation.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Keith Packard [Thu, 28 Jul 2011 22:31:19 +0000 (15:31 -0700)]
drm/i915: Fixup for 'Hold mode_config->mutex during hotplug'
commit
40ee3381dd1010432acc13e907329029096c5bfc upstream.
drm_helper_hpd_irq_event queues another work proc to go and deliver
the user-space event, and that function also wants to hold the config
mutex, so we shouldn't hold the mutex across the
drm_helper_hpd_irq_event call.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Keith Packard [Mon, 25 Jul 2011 17:04:56 +0000 (10:04 -0700)]
drm/i915: Hold mode_config->mutex during hotplug processing
commit
a65e34c79c88895766ab1f8a5afa451eed26622b upstream.
Hotplug detection is a mode setting operation and must hold the
struct_mutex or risk colliding with other mode setting operations.
In particular, the display port hotplug function attempts to re-train
the link if the monitor is supposed to be running when plugged back
in. If that happens while mode setting is underway, the link will get
scrambled, leaving it in an inconsistent state.
This is a special case -- usually the driver mode setting entry points
are covered by the upper level DRM code, but in this case the function
is invoked as a work function not under the control of DRM.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Keith Packard [Fri, 22 Jul 2011 17:44:39 +0000 (10:44 -0700)]
drm/i915: Initialize RCS ring status page address in intel_render_ring_init_dri
commit
f3234706a77bd6e1592ae71fb3268e04cb030dba upstream.
Physically-addressed hardware status pages are initialized early in
the driver load process by i915_init_phys_hws. For UMS environments,
the ring structure is not initialized until the X server starts. At
that point, the entire ring structure is re-initialized with all new
values. Any values set in the ring structure (including
ring->status_page.page_addr) will be lost when the ring is
re-initialized.
This patch moves the initialization of the status_page.page_addr value
to intel_render_ring_init_dri.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ole Henrik Jahren [Fri, 22 Jul 2011 13:56:01 +0000 (15:56 +0200)]
drm/i915: Fix typo in DRM_I915_OVERLAY_PUT_IMAGE ioctl define
commit
842d452985300f4ec14c68cb86046e8a1a3b7251 upstream.
Because of a typo, calling ioctl with DRM_IOCTL_I915_OVERLAY_PUT_IMAGE
is broken if the macro is used directly. When using libdrm the bug is
not hit, since libdrm handles the ioctl encoding internally.
The typo also leads to the .cmd and .cmd_drv fields of the drm_ioctl
structure for DRM_I915_OVERLAY_PUT_IMAGE having inconsistent content.
Signed-off-by: Ole Henrik Jahren <olehenja@alumni.ntnu.no>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jesse Barnes [Wed, 15 Jun 2011 21:32:33 +0000 (23:32 +0200)]
drm/i915: load the LUT before pipe enable on ILK+
commit
9c54c0dd948d715ccfd79e97d852f80eeb53254a upstream.
Per the specs and to address
https://bugs.freedesktop.org/show_bug.cgi?id=36888.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adam Jackson [Wed, 13 Jul 2011 20:32:32 +0000 (16:32 -0400)]
drm/i915/pch: Fix integer math bugs in panel fitting
commit
302983e9059e9ef5de3ca7671918eeb237c5971e upstream.
Consider a 1600x900 panel, upscaling a 1360x768 mode, full-aspect. The
old math would give you:
scaled_width = 1600 * 768; /* 1228800 */
scaled_height = 1360 * 900; /* 1224000 */
if (scaled_width > scaled_height) { /* pillarbox, and true */
width = 1224000 / 768; /* int(1593.75) = 1593 */
x = (1600 - 1593 + 1) / 2; /* 4 */
y = 0;
height = 768;
} /* ... */
This is broken. The total width of scanout would then be 1593 + 4 + 4,
or 1601, which is wider than the panel itself. The hardware very
dutifully implements this, and you end up with a black 45° diagonal from
the top-left corner to the bottom edge of the screen. It's a cool
effect and all, but not what you wanted. Similar things happen for the
letterbox case.
The problem is that you have an integer number of pixels, which means
it's usually impossible to upscale equally on both axes. 1360/768 is
1.7708, 1600/900 is 1.7777. Since we're constrained on the one axis,
the other one wants to come out as an even number of pixels (the panel
is almost certainly even on both axes, and the x/y offsets will be
applied on both sides). In the math above, if 'width' comes out even,
rounding down is correct; if it's odd, you'd rather round up. So just
increment width/height in those cases.
Tested on a Lenovo T500 (Ironlake).
Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-By: Daniel Manrique <daniel.manrique@canonical.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38851
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Thomas Reim [Fri, 29 Jul 2011 14:28:59 +0000 (14:28 +0000)]
drm/radeon: Log Subsystem Vendor and Device Information
commit
d522d9cc5bdd41214084383fc3e6d882f6916a78 upstream.
Log PCI subsystem vendor and subsystem device ID in addition to
PCI vendor and device ID during kernel mode initialisation. This helps
to better identify radeon devices of third-party vendors, e. g. for
bug analysis.
Tested for kernel 2.6.35, 2.6.38 and 3.0 on Asus M2A-VM HDMI board
Signed-off-by: Thomas Reim <reimth@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Thomas Reim [Fri, 29 Jul 2011 14:29:00 +0000 (14:29 +0000)]
drm/radeon: Extended DDC Probing for ECS A740GM-M DVI-D Connector
commit
a81b31e9fc98e067b7e7f1244861c97e44268e2d upstream.
ECS A740GM-M with ATI RADEON 2100 sends data to i2c bus
for a DVI connector that is not implemented/existent on the board.
Fix by applying extented DDC probing for this connector.
Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors
with Improperly Wired DDC Lines
Tested for kernel 2.6.38 on Asus ECS A740GM-M board
BugLink: http://bugs.launchpad.net/bugs/810926
Signed-off-by: Thomas Reim <reimth@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Thomas Reim [Fri, 29 Jul 2011 14:28:58 +0000 (14:28 +0000)]
drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines (here: Asus M2A-VM HDMI)
commit
e384fab8c6f3ca88600bcb2ebdf0eb2f90864fab upstream.
Some integrated ATI Radeon chipset implementations with add-on HDMI card
(e. g. Asus M2A-VM HDMI) indicate the availability of a DDC even
when the add-on card is not plugged in or HDMI is disabled in BIOS setup.
In this case, drm_get_edid() and drm_edid_block_valid() periodically
dump data and kernel errors into system log files and onto terminals.
For these connectors DDC probing is extended by a check for a correct
EDID header. Only in case a valid EDID header is also found, the
(HDMI or DVI) connector will be used by the Radeon driver. This prevents
the kernel driver from useless flooding of logs and terminal sessions with
EDID dumps and error messages.
This patch adds a flag 'requires_extended_probe' to the radeon_connector
structure. In function radeon_connector_needs_extended_probe() this flag
can be set on a chipset family/vendor/connector type specific basis.
In addition, function radeon_ddc_probe() has been adapted to perform
extended DDC probing if required by the connector's flag.
Requires function drm_edid_header_is_valid() in DRM module provided by
[PATCH] drm: Separate EDID Header Check from EDID Block Check.
Tested for kernel 2.6.35, 2.6.38 and 3.0 on Asus M2A-VM HDMI board
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=668196
BugLink: http://bugs.launchpad.net/bugs/7228066
Signed-off-by: Thomas Reim <reimth@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Thomas Reim [Fri, 29 Jul 2011 14:28:57 +0000 (14:28 +0000)]
drm: Separate EDID Header Check from EDID Block Check
commit
051963d4832ed61e5ae74f5330b0a94489e101b9 upstream.
Provides function drm_edid_header_is_valid() for EDID header check
and replaces EDID header check part of function drm_edid_block_valid()
by a call of drm_edid_header_is_valid().
This is a prerequisite to extend DDC probing, e. g. in function
radeon_ddc_probe() for Radeon devices, by a central EDID header check.
Tested for kernel 2.6.35, 2.6.38 and 3.0
Signed-off-by: Thomas Reim <reimth@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jeremy Fitzhardinge [Tue, 31 May 2011 14:50:10 +0000 (10:50 -0400)]
xen: allow enable use of VGA console on dom0
commit
c2419b4a4727f67af2fc2cd68b0d878b75e781bb upstream.
Get the information about the VGA console hardware from Xen, and put
it into the form the bootloader normally generates, so that the rest
of the kernel can deal with VGA as usual.
[ Impact: make VGA console work in dom0 ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
[v1: Rebased on 2.6.39]
[v2: Removed incorrect comments and fixed compile warnings]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tetsuo Handa [Thu, 4 Aug 2011 14:07:40 +0000 (14:07 +0000)]
net: Fix security_socket_sendmsg() bypass problem.
commit
c71d8ebe7a4496fb7231151cb70a6baa0cb56f9a upstream.
The sendmmsg() introduced by commit
228e548e "net: Add sendmmsg socket system
call" is capable of sending to multiple different destination addresses.
SMACK is using destination's address for checking sendmsg() permission.
However, security_socket_sendmsg() is called for only once even if multiple
different destination addresses are passed to sendmmsg().
Therefore, we need to call security_socket_sendmsg() for each destination
address rather than only the first destination address.
Since calling security_socket_sendmsg() every time when only single destination
address was passed to sendmmsg() is a waste of time, omit calling
security_socket_sendmsg() unless destination address of previous datagram and
that of current datagram differs.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Anton Blanchard [Thu, 4 Aug 2011 14:07:39 +0000 (14:07 +0000)]
net: Cap number of elements for sendmmsg
commit
98382f419f32d2c12d021943b87dea555677144b upstream.
To limit the amount of time we can spend in sendmmsg, cap the
number of elements to UIO_MAXIOV (currently 1024).
For error handling an application using sendmmsg needs to retry at
the first unsent message, so capping is simpler and requires less
application logic than returning EINVAL.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Anton Blanchard [Thu, 4 Aug 2011 14:07:38 +0000 (14:07 +0000)]
net: sendmmsg should only return an error if no messages were sent
commit
728ffb86f10873aaf4abd26dde691ee40ae731fe upstream.
sendmmsg uses a similar error return strategy as recvmmsg but it
turns out to be a confusing way to communicate errors.
The current code stores the error code away and returns it on the next
sendmmsg call. This means a call with completely valid arguments could
get an error from a previous call.
Change things so we only return an error if no datagrams could be sent.
If less than the requested number of messages were sent, the application
must retry starting at the first failed one and if the problem is
persistent the error will be returned.
This matches the behaviour of other syscalls like read/write - it
is not an error if less than the requested number of elements are sent.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stanislaw Gruszka [Fri, 29 Jul 2011 13:59:08 +0000 (15:59 +0200)]
ath9k: skip ->config_pci_powersave() if PCIe port has ASPM disabled
commit
d4930086bdd0c08a8b3a4d66a9c702297cb74a99 upstream.
We receive many bug reports about system hang during suspend/resume
when ath9k driver is in use. Adrian Chadd remarked that this problem
happens on systems that have ASPM disabled.
To do not hit the bug, skip doing ->config_pci_powersave magic if PCIe
downstream port device, which ath9k device is connected to, has ASPM
disabled.
Bug was introduced by:
commit
53bc7aa08b48e5cd745f986731cc7dc24eef2a9f
Author: Vivek Natarajan <vnatarajan@atheros.com>
Date: Mon Apr 5 14:48:04 2010 +0530
ath9k: Add support for newer AR9285 chipsets.
Patch should address:
https://bugzilla.kernel.org/show_bug.cgi?id=37462
https://bugzilla.kernel.org/show_bug.cgi?id=37082
https://bugzilla.redhat.com/show_bug.cgi?id=697157
however I did not receive confirmation about that, except from Camilo
Mesias, whose system stops hang regularly with this patch (but still
hangs from time to time, but this is probably some other bug).
Tested-by: Camilo Mesias <camilo@mesias.co.uk>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felix Fietkau [Wed, 27 Jul 2011 13:01:02 +0000 (15:01 +0200)]
ath9k: initialize tx chainmask before testing channel tx power values
commit
c1227340ca65c2069222a956a68b6842d460c4f4 upstream.
With an uninitialized chainmask, the per-channel power will only contain
the power limits for a single chain instead of the combined tx power.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stanislaw Gruszka [Wed, 27 Jul 2011 13:37:43 +0000 (15:37 +0200)]
iwlegacy: set tx power after rxon_assoc
commit
17e859a899712d16c3e70b045d61ad9e02c53f8a upstream.
If settings of tx power was deferred during scan or changing channel we
have to setup them during commit rxon. Fix problem on 3945 (4965 already
has this fix).
Optimize code to apply tx settings only when tx power was actually
changed.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger [Fri, 29 Jul 2011 15:53:12 +0000 (10:53 -0500)]
rtlwifi: Fix kernel oops on ARM SOC
commit
b6b67df3f24c45af0012ee3c8af2f62ca083ae18 upstream.
This driver uses information from the self member of the pci_bus struct to
get information regarding the bridge to which the PCIe device is attached.
Unfortunately, this member is not established on all architectures, which
leads to a kernel oops.
Skipping the entire block that uses the self member to determine the bridge
vendor will only affect RTL8192DE devices as that driver sets the ASPM support
flag differently when the bridge vendor is Intel. If the self member is
available, there is no functional change.
This patch fixes Bugzilla No. 40212.
Reported-by: Hubert Liao <liao.hubertt@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stanislaw Gruszka [Tue, 2 Aug 2011 11:29:02 +0000 (13:29 +0200)]
rt2x00: fix usage of NULL queue
commit
00898a47269ae5e6dda04defad00234b96692d95 upstream.
We may call rt2x00queue_pause_queue(queue) with queue == NULL. Bug
was introduced by commit
62fe778412b36791b7897cfa139342906fbbf07b
"rt2x00: Fix stuck queue in tx failure case" .
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stanislaw Gruszka [Sat, 30 Jul 2011 11:32:56 +0000 (13:32 +0200)]
rt2x00: rt2800: fix zeroing skb structure
commit
b52398b6e4522176dd125722c72c301015d24520 upstream.
We should clear skb->data not skb itself. Bug was introduced by:
commit
0b8004aa12d13ec750d102ba4082a95f0107c649 "rt2x00: Properly
reserve room for descriptors in skbs".
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
John David Anglin [Sat, 11 Jun 2011 18:42:06 +0000 (14:42 -0400)]
fix return type of __atomic64_add_return
commit
548c210fbffdb008a80fa41ff0cb3965f185583d upstream.
The return type of __atomic64_add_return of should be s64 or long, not
int. This fixes the atomic64 test failure that I previously reported.
Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Carlos O'Donell [Fri, 8 Jul 2011 21:27:00 +0000 (17:27 -0400)]
Fix futex support
commit
d9ba5fe76d604514444b1ea0a19f38c6196a46e3 upstream.
Implements futex op support and makes futex cmpxchg atomic.
Tested on 64-bit SMP kernel running on 2 x PA8700s.
[jejb: checkpatch fixes]
Signed-off-by: Carlos O'Donell <carlos@systemhalted.org>
Tested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
James Bottomley [Fri, 29 Jul 2011 14:37:02 +0000 (18:37 +0400)]
wire up sendmmsg syscall
commit
205e9a2106b934ea39049bab28f0896c17a2cb30 upstream.
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Shawn Bohrer [Thu, 30 Jun 2011 16:21:32 +0000 (11:21 -0500)]
futex: Fix regression with read only mappings
commit
9ea71503a8ed9184d2d0b8ccc4d269d05f7940ae upstream.
commit
7485d0d3758e8e6491a5c9468114e74dc050785d (futexes: Remove rw
parameter from get_futex_key()) in 2.6.33 fixed two problems: First, It
prevented a loop when encountering a ZERO_PAGE. Second, it fixed RW
MAP_PRIVATE futex operations by forcing the COW to occur by
unconditionally performing a write access get_user_pages_fast() to get
the page. The commit also introduced a user-mode regression in that it
broke futex operations on read-only memory maps. For example, this
breaks workloads that have one or more reader processes doing a
FUTEX_WAIT on a futex within a read only shared file mapping, and a
writer processes that has a writable mapping issuing the FUTEX_WAKE.
This fixes the regression for valid futex operations on RO mappings by
trying a RO get_user_pages_fast() when the RW get_user_pages_fast()
fails. This change makes it necessary to also check for invalid use
cases, such as anonymous RO mappings (which can never change) and the
ZERO_PAGE which the commit referenced above was written to address.
This patch does restore the original behavior with RO MAP_PRIVATE
mappings, which have inherent user-mode usage problems and don't really
make sense. With this patch performing a FUTEX_WAIT within a RO
MAP_PRIVATE mapping will be successfully woken provided another process
updates the region of the underlying mapped file. However, the mmap()
man page states that for a MAP_PRIVATE mapping:
It is unspecified whether changes made to the file after
the mmap() call are visible in the mapped region.
So user-mode users attempting to use futex operations on RO MAP_PRIVATE
mappings are depending on unspecified behavior. Additionally a
RO MAP_PRIVATE mapping could fail to wake up in the following case.
Thread-A: call futex(FUTEX_WAIT, memory-region-A).
get_futex_key() return inode based key.
sleep on the key
Thread-B: call mprotect(PROT_READ|PROT_WRITE, memory-region-A)
Thread-B: write memory-region-A.
COW happen. This process's memory-region-A become related
to new COWed private (ie PageAnon=1) page.
Thread-B: call futex(FUETX_WAKE, memory-region-A).
get_futex_key() return mm based key.
IOW, we fail to wake up Thread-A.
Once again doing something like this is just silly and users who do
something like this get what they deserve.
While RO MAP_PRIVATE mappings are nonsensical, checking for a private
mapping requires walking the vmas and was deemed too costly to avoid a
userspace hang.
This Patch is based on Peter Zijlstra's initial patch with modifications to
only allow RO mappings for futex operations that need VERIFY_READ access.
Reported-by: David Oliver <david@rgmadvisors.com>
Signed-off-by: Shawn Bohrer <sbohrer@rgmadvisors.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: peterz@infradead.org
Cc: eric.dumazet@gmail.com
Cc: zvonler@rgmadvisors.com
Cc: hughd@google.com
Link: http://lkml.kernel.org/r/1309450892-30676-1-git-send-email-sbohrer@rgmadvisors.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WANG Cong [Wed, 3 Aug 2011 23:21:15 +0000 (16:21 -0700)]
cris: add missing declaration of kgdb_init() and breakpoint()
commit
1646ec9db75e151b0479dbfaf972f741d0476ec7 upstream.
Fix:
arch/cris/arch-v10/kernel/irq.c:239: error: implicit declaration of function 'kgdb_init'
arch/cris/arch-v10/kernel/irq.c:240: error: implicit declaration of function 'breakpoint'
Declare these two functions.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WANG Cong [Wed, 3 Aug 2011 23:21:14 +0000 (16:21 -0700)]
cris: fix the prototype of sync_serial_ioctl()
commit
b4bc281266e84e9a432b588ebdcef5fb94dc8ecb upstream.
Fix:
arch/cris/arch-v10/drivers/sync_serial.c:961: error: conflicting types for 'sync_serial_ioctl'
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WANG Cong [Wed, 3 Aug 2011 23:21:14 +0000 (16:21 -0700)]
cris: fix a build error in sync_serial_open()
commit
4b851d88192c22cf77418a0b4c45b5c789276837 upstream.
Fix:
arch/cris/arch-v10/drivers/sync_serial.c:628: error: 'ret' undeclared (first use in this function)
'ret' should be 'err'.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WANG Cong [Wed, 3 Aug 2011 23:21:12 +0000 (16:21 -0700)]
cris: fix a build error in kernel/fork.c
commit
d4969213f9e75ec1bfa6ea65c279c64cab7d1bd6 upstream.
Fix this error:
kernel/fork.c:267: error: implicit declaration of function 'alloc_thread_info_node'
This is due to renaming alloc_thread_info() to alloc_thread_info_node().
[akpm@linux-foundation.org: coding-style fixes]
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Fri, 5 Aug 2011 04:59:21 +0000 (21:59 -0700)]
Linux 3.0.1
Alasdair G Kergon [Tue, 2 Aug 2011 11:32:01 +0000 (12:32 +0100)]
dm: fix idr leak on module removal
commit
d15b774c2920d55e3d58275c97fbe3adc3afde38 upstream.
Destroy _minor_idr when unloading the core dm module. (Found by kmemleak.)
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike Snitzer [Tue, 2 Aug 2011 11:32:00 +0000 (12:32 +0100)]
dm mpath: fix potential NULL pointer in feature arg processing
commit
286f367dad40beb3234a18c17391d03ba939a7f3 upstream.
Avoid dereferencing a NULL pointer if the number of feature arguments
supplied is fewer than indicated.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mikulas Patocka [Tue, 2 Aug 2011 11:32:00 +0000 (12:32 +0100)]
dm snapshot: flush disk cache when merging
commit
762a80d9fc9f690a3a35983f3b4619a220650808 upstream.
This patch makes dm-snapshot flush disk cache when writing metadata for
merging snapshot.
Without cache flushing the disk may reorder metadata write and other
data writes and there is a possibility of data corruption in case of
power fault.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mikulas Patocka [Tue, 2 Aug 2011 11:32:01 +0000 (12:32 +0100)]
dm io: flush cpu cache with vmapped io
commit
bb91bc7bacb906c9f3a9b22744c53fa7564b51ba upstream.
For normal kernel pages, CPU cache is synchronized by the dma layer.
However, this is not done for pages allocated with vmalloc. If we do I/O
to/from vmallocated pages, we must synchronize CPU cache explicitly.
Prior to doing I/O on vmallocated page we must call
flush_kernel_vmap_range to flush dirty cache on the virtual address.
After finished read we must call invalidate_kernel_vmap_range to
invalidate cache on the virtual address, so that accesses to the virtual
address return newly read data and not stale data from CPU cache.
This patch fixes metadata corruption on dm-snapshots on PA-RISC and
possibly other architectures with caches indexed by virtual address.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Julia Lawall [Thu, 28 Jul 2011 12:46:05 +0000 (14:46 +0200)]
ALSA: sound/core/pcm_compat.c: adjust array index
commit
ca9380fd68514c7bc952282c1b4fc70607e9fe43 upstream.
Convert array index from the loop bound to the loop index.
A simplified version of the semantic patch that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e1,e2,ar;
@@
for(e1 = 0; e1 < e2; e1++) { <...
ar[
- e2
+ e1
]
...> }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Engraf [Wed, 20 Jul 2011 13:03:39 +0000 (15:03 +0200)]
watchdog: shwdt: fix usage of mod_timer
commit
bea1906620ce72b63f83735c4cc2642b25ec54ae upstream.
Fix the usage of mod_timer() and make the driver usable. mod_timer() must
be called with an absolute timeout in jiffies. The old implementation
used a relative timeout thus the hardware watchdog was never triggered.
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Wim Van sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Steven Whitehouse [Tue, 26 Jul 2011 08:15:45 +0000 (09:15 +0100)]
GFS2: Fix mount hang caused by certain access pattern to sysfs files
commit
19237039919088781b4191a00bdc1284d8fea1dd upstream.
Depending upon the order of userspace/kernel during the
mount process, this can result in a hang without the
_all version of the completion.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Gertjan van Wingerde [Wed, 6 Jul 2011 20:58:55 +0000 (22:58 +0200)]
rt2x00: Add device ID for RT539F device.
commit
71e0b38c2914018b01f3f08b43ee9e3328197699 upstream.
Reported-by: Wim Vander Schelden <wim@fixnum.org>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oleg Nesterov [Sat, 30 Jul 2011 14:35:02 +0000 (16:35 +0200)]
oom: task->mm == NULL doesn't mean the memory was freed
commit
c027a474a68065391c8773f6e83ed5412657e369 upstream.
exit_mm() sets ->mm == NULL then it does mmput()->exit_mmap() which
frees the memory.
However select_bad_process() checks ->mm != NULL before TIF_MEMDIE,
so it continues to kill other tasks even if we have the oom-killed
task freeing its memory.
Change select_bad_process() to check ->mm after TIF_MEMDIE, but skip
the tasks which have already passed exit_notify() to ensure a zombie
with TIF_MEMDIE set can't block oom-killer. Alternatively we could
probably clear TIF_MEMDIE after exit_mmap().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
John Johansen [Sat, 25 Jun 2011 15:57:07 +0000 (16:57 +0100)]
AppArmor: Fix masking of capabilities in complain mode
commit
25e75dff519bcce2cb35023105e7df51d7b9e691 upstream.
AppArmor is masking the capabilities returned by capget against the
capabilities mask in the profile. This is wrong, in complain mode the
profile has effectively all capabilities, as the profile restrictions are
not being enforced, merely tested against to determine if an access is
known by the profile.
This can result in the wrong behavior of security conscience applications
like sshd which examine their capability set, and change their behavior
accordingly. In this case because of the masked capability set being
returned sshd fails due to DAC checks, even when the profile is in complain
mode.
Kernels affected: 2.6.36 - 3.0.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
John Johansen [Tue, 28 Jun 2011 14:06:38 +0000 (15:06 +0100)]
AppArmor: Fix reference to rcu protected pointer outside of rcu_read_lock
commit
04fdc099f9c80c7775dbac388fc97e156d4d47e7 upstream.
The pointer returned from tracehook_tracer_task() is only valid inside
the rcu_read_lock. However the tracer pointer obtained is being passed
to aa_may_ptrace outside of the rcu_read_lock critical section.
Mover the aa_may_ptrace test into the rcu_read_lock critical section, to
fix this.
Kernels affected: 2.6.36 - 3.0
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Manfred Spraul [Tue, 26 Jul 2011 00:11:47 +0000 (17:11 -0700)]
ipc/sem.c: fix race with concurrent semtimedop() timeouts and IPC_RMID
commit
d694ad62bf539dbb20a0899ac2a954555f9e4a83 upstream.
If a semaphore array is removed and in parallel a sleeping task is woken
up (signal or timeout, does not matter), then the woken up task does not
wait until wake_up_sem_queue_do() is completed. This will cause crashes,
because wake_up_sem_queue_do() will read from a stale pointer.
The fix is simple: Regardless of anything, always call get_queue_result().
This function waits until wake_up_sem_queue_do() has finished it's task.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=27142
Reported-by: Yuriy Yevtukhov <yuriy@ucoz.com>
Reported-by: Harald Laabs <kernel@dasr.de>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hendrik Brueckner [Tue, 5 Jul 2011 21:50:18 +0000 (21:50 +0000)]
hvc_console: Improve tty/console put_chars handling
commit
8c2381af0d3ef62a681dac5a141b6dabb27bf2e1 upstream.
Currently, the hvc_console_print() function drops console output if the
hvc backend's put_chars() returns 0. This patch changes this behavior
to allow a retry through returning -EAGAIN.
This change also affects the hvc_push() function. Both functions are
changed to handle -EAGAIN and to retry the put_chars() operation.
If a hvc backend returns -EAGAIN, the retry handling differs:
- hvc_console_print() spins to write the complete console output.
- hvc_push() behaves the same way as for returning 0.
Now hvc backends can indirectly control the way how console output is
handled through the hvc console layer.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Anton Blanchard [Tue, 5 Jul 2011 21:51:36 +0000 (21:51 +0000)]
powerpc/pseries/hvconsole: Fix dropped console output
commit
51d33021425e1f905beb4208823146f2fb6517da upstream.
Return -EAGAIN when we get H_BUSY back from the hypervisor. This
makes the hvc console driver retry, avoiding dropped printks.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ralf Baechle [Mon, 27 Jun 2011 13:26:56 +0000 (14:26 +0100)]
SERIAL: SC26xx: Fix link error.
commit
f2eb3cdf14457fccb14ae8c4d7d7cee088cd3957 upstream.
Kconfig allows enabling console support for the SC26xx driver even when
it's configured as a module resulting in a:
ERROR: "uart_console_device" [drivers/tty/serial/sc26xx.ko] undefined!
modpost error since the driver was merged in
eea63e0e8a60d00485b47fb6e75d9aa2566b989b [SC26XX: New serial driver for
SC2681 uarts] in 2.6.25. Fixed by only allowing console support to be
enabled if the driver is builtin.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stephen Warren [Fri, 17 Jun 2011 15:45:07 +0000 (09:45 -0600)]
tty/serial: Fix XSCALE serial ports, e.g. ce4100
commit
5568181f188ae9485a0cdbea5ea48f63d186a298 upstream.
Commit
4539c24fe4f92c09ee668ef959d3e8180df619b9 "tty/serial: Add
explicit PORT_TEGRA type" introduced separate flags describing the need
for IER bits UUE and RTOIE. Both bits are required for the XSCALE port
type. While that patch updated uart_config[] as required, the auto-probing
code wasn't updated to set the RTOIE flag when an XSCALE port type was
detected. This caused such ports to stop working. This patch rectifies
that.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Daisuke Nishimura [Tue, 26 Jul 2011 23:08:25 +0000 (16:08 -0700)]
memcg: fix behavior of mem_cgroup_resize_limit()
commit
108b6a78463bb8c7163e4f9779f36ad8bbade334 upstream.
Commit
22a668d7c3ef ("memcg: fix behavior under memory.limit equals to
memsw.limit") introduced "memsw_is_minimum" flag, which becomes true
when mem_limit == memsw_limit. The flag is checked at the beginning of
reclaim, and "noswap" is set if the flag is true, because using swap is
meaningless in this case.
This works well in most cases, but when we try to shrink mem_limit,
which is the same as memsw_limit now, we might fail to shrink mem_limit
because swap doesn't used.
This patch fixes this behavior by:
- check MEM_CGROUP_RECLAIM_SHRINK at the begining of reclaim
- If it is set, don't set "noswap" flag even if memsw_is_minimum is true.
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sven Neumann [Tue, 12 Jul 2011 13:52:07 +0000 (15:52 +0200)]
cfg80211: really ignore the regulatory request
commit
a203c2aa4cefccb879c879b8e1cad1a09a679e55 upstream.
At the beginning of wiphy_update_regulatory() a check is performed
whether the request is to be ignored. Then the request is sent to
the driver nevertheless. This happens even if last_request points
to NULL, leading to a crash in the driver:
[<
bf01d864>] (lbs_set_11d_domain_info+0x28/0x1e4 [libertas]) from [<
c03b714c>] (wiphy_update_regulatory+0x4d0/0x4f4)
[<
c03b714c>] (wiphy_update_regulatory+0x4d0/0x4f4) from [<
c03b4008>] (wiphy_register+0x354/0x420)
[<
c03b4008>] (wiphy_register+0x354/0x420) from [<
bf01b17c>] (lbs_cfg_register+0x80/0x164 [libertas])
[<
bf01b17c>] (lbs_cfg_register+0x80/0x164 [libertas]) from [<
bf020e64>] (lbs_start_card+0x20/0x88 [libertas])
[<
bf020e64>] (lbs_start_card+0x20/0x88 [libertas]) from [<
bf02cbd8>] (if_sdio_probe+0x898/0x9c0 [libertas_sdio])
Fix this by returning early. Also remove the out: label as it is
not any longer needed.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Cc: linux-wireless@vger.kernel.org
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Daniel Mack <daniel@zonque.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 19 Jul 2011 18:01:23 +0000 (14:01 -0400)]
EHCI: fix direction handling for interrupt data toggles
commit
e04f5f7e423018bcec84c11af2058cdce87816f3 upstream.
This patch (as1480) fixes a rather obscure bug in ehci-hcd. The
qh_update() routine needs to know the number and direction of the
endpoint corresponding to its QH argument. The number can be taken
directly from the QH data structure, but the direction isn't stored
there. The direction is taken instead from the first qTD linked to
the QH.
However, it turns out that for interrupt transfers, qh_update() gets
called before the qTDs are linked to the QH. As a result, qh_update()
computes a bogus direction value, which messes up the endpoint toggle
handling. Under the right combination of circumstances this causes
usb_reset_endpoint() not to work correctly, which causes packets to be
dropped and communications to fail.
Now, it's silly for the QH structure not to have direct access to all
the descriptor information for the corresponding endpoint. Ultimately
it may get a pointer to the usb_host_endpoint structure; for now,
adding a copy of the direction flag solves the immediate problem.
This allows the Spyder2 color-calibration system (a low-speed USB
device that sends all its interrupt data packets with the toggle set
to 0 and hance requires constant use of usb_reset_endpoint) to work
when connected through a high-speed hub. Thanks to Graeme Gill for
supplying the hardware that allowed me to track down this bug.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Graeme Gill <graeme@argyllcms.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sergei Shtylyov [Wed, 6 Jul 2011 19:19:38 +0000 (23:19 +0400)]
EHCI: only power off port if over-current is active
commit
81463c1d707186adbbe534016cd1249edeab0dac upstream.
MAX4967 USB power supply chip we use on our boards signals over-current when
power is not enabled; once it's enabled, over-current signal returns to normal.
That unfortunately caused the endless stream of "over-current change on port"
messages. The EHCI root hub code reacts on every over-current signal change
with powering off the port -- such change event is generated the moment the
port power is enabled, so once enabled the power is immediately cut off.
I think we should only cut off power when we're seeing the active over-current
signal, so I'm adding such check to that code. I also think that the fact that
we've cut off the port power should be reflected in the result of GetPortStatus
request immediately, hence I'm adding a PORTSCn register readback after write...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Du, Alek [Thu, 7 Jul 2011 14:16:48 +0000 (15:16 +0100)]
n_gsm: fix the wrong FCS handling
commit
f086ced17191fa0c5712539d2b680eae3dc972a1 upstream.
FCS could be GSM0_SOF, so will break state machine...
[This byte isn't quoted in any way so a SOF here doesn't imply an error
occurred.]
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
[Trivial but best backported once its in 3.1rc I think]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasiliy Kulikov [Tue, 26 Jul 2011 23:08:38 +0000 (16:08 -0700)]
proc: fix a race in do_io_accounting()
commit
293eb1e7772b25a93647c798c7b89bf26c2da2e0 upstream.
If an inode's mode permits opening /proc/PID/io and the resulting file
descriptor is kept across execve() of a setuid or similar binary, the
ptrace_may_access() check tries to prevent using this fd against the
task with escalated privileges.
Unfortunately, there is a race in the check against execve(). If
execve() is processed after the ptrace check, but before the actual io
information gathering, io statistics will be gathered from the
privileged process. At least in theory this might lead to gathering
sensible information (like ssh/ftp password length) that wouldn't be
available otherwise.
Holding task->signal->cred_guard_mutex while gathering the io
information should protect against the race.
The order of locking is similar to the one inside of ptrace_attach():
first goes cred_guard_mutex, then lock_task_sighand().
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trond Myklebust [Sat, 30 Jul 2011 16:45:35 +0000 (12:45 -0400)]
NFS: Fix spurious readdir cookie loop messages
commit
0c0308066ca53fdf1423895f3a42838b67b3a5a8 upstream.
If the directory contents change, then we have to accept that the
file->f_pos value may shrink if we do a 'search-by-cookie'. In that
case, we should turn off the loop detection and let the NFS client
try to recover.
The patch also fixes a second loop detection bug by ensuring
that after turning on the ctx->duped flag, we read at least one new
cookie into ctx->dir_cookie before attempting to match with
ctx->dup_cookie.
Reported-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trond Myklebust [Mon, 25 Jul 2011 19:37:29 +0000 (15:37 -0400)]
NFSv4: Don't use the delegation->inode in nfs_mark_return_delegation()
commit
ed1e6211a0a134ff23592c6f057af982ad5dab52 upstream.
nfs_mark_return_delegation() is usually called without any locking, and
so it is not safe to dereference delegation->inode. Since the inode is
only used to discover the nfs_client anyway, it makes more sense to
have the callers pass a valid pointer to the nfs_server as a parameter.
Reported-by: Ian Kent <raven@themaw.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
J. Bruce Fields [Wed, 29 Jun 2011 20:49:04 +0000 (16:49 -0400)]
svcrpc: fix list-corrupting race on nfsd shutdown
commit
ebc63e531cc6a457595dd110b07ac530eae788c3 upstream.
After commit
3262c816a3d7fb1eaabce633caa317887ed549ae "[PATCH] knfsd:
split svc_serv into pools", svc_delete_xprt (then svc_delete_socket) no
longer removed its xpt_ready (then sk_ready) field from whatever list it
was on, noting that there was no point since the whole list was about to
be destroyed anyway.
That was mostly true, but forgot that a few svc_xprt_enqueue()'s might
still be hanging around playing with the about-to-be-destroyed list, and
could get themselves into trouble writing to freed memory if we left
this xprt on the list after freeing it.
(This is actually functionally identical to a patch made first by Ben
Greear, but with more comments.)
Cc: gnb@fmeh.org
Reported-by: Ben Greear <greearb@candelatech.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
J. Bruce Fields [Wed, 29 Jun 2011 12:23:50 +0000 (08:23 -0400)]
nfsd4: fix file leak on open_downgrade
commit
f197c27196a5e7631b89e2e92daa096fcf7c302c upstream.
Stateid's hold a read reference for a read open, a write reference for a
write open, and an additional one of each for each read+write open. The
latter wasn't getting put on a downgrade, so something like:
open RW
open R
downgrade to R
was resulting in a file leak.
Also fix an imbalance in an error path.
Regression from
7d94784293096c0a46897acdb83be5abd9278ece "nfsd4: fix
downgrade/lock logic".
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
J. Bruce Fields [Mon, 27 Jun 2011 20:57:12 +0000 (16:57 -0400)]
nfsd4: remember to put RW access on stateid destruction
commit
499f3edc23ca0431f3a0a6736b3a40944c81bf3b upstream.
Without this, for example,
open read
open read+write
close
will result in a struct file leak.
Regression from
7d94784293096c0a46897acdb83be5abd9278ece "nfsd4: fix
downgrade/lock logic".
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Casey Bodley [Sat, 23 Jul 2011 18:58:10 +0000 (14:58 -0400)]
nfsd: don't break lease on CLAIM_DELEGATE_CUR
commit
0c12eaffdf09466f36a9ffe970dda8f4aeb6efc0 upstream.
CLAIM_DELEGATE_CUR is used in response to a broken lease; allowing it
to break the lease and return EAGAIN leaves the client unable to make
progress in returning the delegation
nfs4_get_vfs_file() now takes struct nfsd4_open for access to the
claim type, and calls nfsd_open() with NFSD_MAY_NOT_BREAK_LEASE when
claim type is CLAIM_DELEGATE_CUR
Signed-off-by: Casey Bodley <cbodley@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tyler Hicks [Wed, 27 Jul 2011 00:47:08 +0000 (19:47 -0500)]
eCryptfs: Unlock keys needed by ecryptfsd
commit
b2987a5e05ec7a1af7ca42e5d5349d7a22753031 upstream.
Fixes a regression caused by
b5695d04634fa4ccca7dcbc05bb4a66522f02e0b
Kernel keyring keys containing eCryptfs authentication tokens should not
be write locked when calling out to ecryptfsd to wrap and unwrap file
encryption keys. The eCryptfs kernel code can not hold the key's write
lock because ecryptfsd needs to request the key after receiving such a
request from the kernel.
Without this fix, all file opens and creates will timeout and fail when
using the eCryptfs PKI infrastructure. This is not an issue when using
passphrase-based mount keys, which is the most widely deployed eCryptfs
configuration.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Acked-by: Roberto Sassu <roberto.sassu@polito.it>
Tested-by: Roberto Sassu <roberto.sassu@polito.it>
Tested-by: Alexis Hafner1 <haf@zurich.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Thieu Le [Tue, 26 Jul 2011 23:15:10 +0000 (16:15 -0700)]
ecryptfs: Make inode bdi consistent with superblock bdi
commit
985ca0e626e195ea08a1a82b8dbeb6719747429a upstream.
Make the inode mapping bdi consistent with the superblock bdi so that
dirty pages are flushed properly.
Signed-off-by: Thieu Le <thieule@chromium.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jan Kara [Mon, 30 May 2011 11:29:20 +0000 (13:29 +0200)]
ext3: Fix oops in ext3_try_to_allocate_with_rsv()
commit
ad95c5e9bc8b5885f94dce720137cac8fa8da4c9 upstream.
Block allocation is called from two places: ext3_get_blocks_handle() and
ext3_xattr_block_set(). These two callers are not necessarily synchronized
because xattr code holds only xattr_sem and i_mutex, and
ext3_get_blocks_handle() may hold only truncate_mutex when called from
writepage() path. Block reservation code does not expect two concurrent
allocations to happen to the same inode and thus assertions can be triggered
or reservation structure corruption can occur.
Fix the problem by taking truncate_mutex in xattr code to serialize
allocations.
CC: Sage Weil <sage@newdream.net>
Reported-by: Fyodor Ustinov <ufm@ufm.su>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jiaying Zhang [Mon, 11 Jul 2011 00:07:25 +0000 (20:07 -0400)]
ext4: free allocated and pre-allocated blocks when check_eofblocks_fl fails
commit
575a1d4bdfa2ea9fc10733013136145b497e1be0 upstream.
Upon corrupted inode or disk failures, we may fail after we already
allocate some blocks from the inode or take some blocks from the
inode's preallocation list, but before we successfully insert the
corresponding extent to the extent tree. In this case, we should free
any allocated blocks and discard the inode's preallocated blocks
because the entries in the inode's preallocation list may be in an
inconsistent state.
Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Maxim Patlasov [Sun, 10 Jul 2011 23:37:48 +0000 (19:37 -0400)]
ext4: fix i_blocks/quota accounting when extent insertion fails
commit
7132de744ba76930d13033061018ddd7e3e8cd91 upstream.
The current implementation of ext4_free_blocks() always calls
dquot_free_block This looks quite sensible in the most cases: blocks
to be freed are associated with inode and were accounted in quota and
i_blocks some time ago.
However, there is a case when blocks to free were not accounted by the
time calling ext4_free_blocks() yet:
1. delalloc is on, write_begin pre-allocated some space in quota
2. write-back happens, ext4 allocates some blocks in ext4_ext_map_blocks()
3. then ext4_ext_map_blocks() gets an error (e.g. ENOSPC) from
ext4_ext_insert_extent() and calls ext4_free_blocks().
In this scenario, ext4_free_blocks() calls dquot_free_block() who, in
turn, decrements i_blocks for blocks which were not accounted yet (due
to delalloc) After clean umount, e2fsck reports something like:
> Inode 21, i_blocks is 5080, should be 5128. Fix<y>?
because i_blocks was erroneously decremented as explained above.
The patch fixes the problem by passing the new flag
EXT4_FREE_BLOCKS_NO_QUOT_UPDATE to ext4_free_blocks(), to request
that the dquot_free_block() call be skipped.
Signed-off-by: Maxim Patlasov <maxim.patlasov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dan Rosenberg [Tue, 26 Jul 2011 00:11:53 +0000 (17:11 -0700)]
xtensa: prevent arbitrary read in ptrace
commit
0d0138ebe24b94065580bd2601f8bb7eb6152f56 upstream.
Prevent an arbitrary kernel read. Check the user pointer with access_ok()
before copying data in.
[akpm@linux-foundation.org: s/EIO/EFAULT/]
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Peter Zijlstra [Tue, 26 Jul 2011 00:11:57 +0000 (17:11 -0700)]
mm/backing-dev.c: reset bdi min_ratio in bdi_unregister()
commit
ccb6108f5b0b541d3eb332c3a73e645c0f84278e upstream.
Vito said:
: The system has many usb disks coming and going day to day, with their
: respective bdi's having min_ratio set to 1 when inserted. It works for
: some time until eventually min_ratio can no longer be set, even when the
: active set of bdi's seen in /sys/class/bdi/*/min_ratio doesn't add up to
: anywhere near 100.
:
: This then leads to an unrelated starvation problem caused by write-heavy
: fuse mounts being used atop the usb disks, a problem the min_ratio setting
: at the underlying devices bdi effectively prevents.
Fix this leakage by resetting the bdi min_ratio when unregistering the
BDI.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Reported-by: Vito Caputo <lkml@pengaru.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Benjamin Herrenschmidt [Tue, 26 Jul 2011 00:12:32 +0000 (17:12 -0700)]
mm/futex: fix futex writes on archs with SW tracking of dirty & young
commit
2efaca927f5cd7ecd0f1554b8f9b6a9a2c329c03 upstream.
I haven't reproduced it myself but the fail scenario is that on such
machines (notably ARM and some embedded powerpc), if you manage to hit
that futex path on a writable page whose dirty bit has gone from the PTE,
you'll livelock inside the kernel from what I can tell.
It will go in a loop of trying the atomic access, failing, trying gup to
"fix it up", getting succcess from gup, go back to the atomic access,
failing again because dirty wasn't fixed etc...
So I think you essentially hang in the kernel.
The scenario is probably rare'ish because affected architecture are
embedded and tend to not swap much (if at all) so we probably rarely hit
the case where dirty is missing or young is missing, but I think Shan has
a piece of SW that can reliably reproduce it using a shared writable
mapping & fork or something like that.
On archs who use SW tracking of dirty & young, a page without dirty is
effectively mapped read-only and a page without young unaccessible in the
PTE.
Additionally, some architectures might lazily flush the TLB when relaxing
write protection (by doing only a local flush), and expect a fault to
invalidate the stale entry if it's still present on another processor.
The futex code assumes that if the "in_atomic()" access -EFAULT's, it can
"fix it up" by causing get_user_pages() which would then be equivalent to
taking the fault.
However that isn't the case. get_user_pages() will not call
handle_mm_fault() in the case where the PTE seems to have the right
permissions, regardless of the dirty and young state. It will eventually
update those bits ... in the struct page, but not in the PTE.
Additionally, it will not handle the lazy TLB flushing that can be
required by some architectures in the fault case.
Basically, gup is the wrong interface for the job. The patch provides a
more appropriate one which boils down to just calling handle_mm_fault()
since what we are trying to do is simulate a real page fault.
The futex code currently attempts to write to user memory within a
pagefault disabled section, and if that fails, tries to fix it up using
get_user_pages().
This doesn't work on archs where the dirty and young bits are maintained
by software, since they will gate access permission in the TLB, and will
not be updated by gup().
In addition, there's an expectation on some archs that a spurious write
fault triggers a local TLB flush, and that is missing from the picture as
well.
I decided that adding those "features" to gup() would be too much for this
already too complex function, and instead added a new simpler
fixup_user_fault() which is essentially a wrapper around handle_mm_fault()
which the futex code can call.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix some nits Darren saw, fiddle comment layout]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-by: Shan Hai <haishan.bai@gmail.com>
Tested-by: Shan Hai <haishan.bai@gmail.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Darren Hart <darren.hart@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Philip A. Prindeville [Tue, 26 Jul 2011 00:13:05 +0000 (17:13 -0700)]
geode: reflect mfgpt dependency on mfd
commit
703f03c896fdbd726b809066ae279df513992f0e upstream.
As stated in drivers/mfd/cs5535-mfd.c, the mfd driver exposes the BARs
which then make the GPIO, MFGPT, ACPI, etc. all visible to the system.
So the dependencies of the MFGPT stuff have changed, and most people
expect Kconfig to bring in the necessary dependencies. Without them, the
module fails to load and most people don't understand why because the
details of the rewrite aren't captured anywhere most people who know to
look.
This dependency needs to be reflected in Kconfig.
Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>
Acked-by: Alexandros C. Couloumbis <alex@ozo.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Tue, 26 Jul 2011 00:13:21 +0000 (17:13 -0700)]
drivers/firmware/sigma.c needs MODULE_LICENSE
commit
27c46a2546c75c6814562e85b751e3d64c188ad5 upstream.
Fix module tainting message:
sigma: module license 'unspecified' taints kernel.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stephen M. Cameron [Sat, 9 Jul 2011 07:04:12 +0000 (09:04 +0200)]
cciss: do not attempt to read from a write-only register
commit
07d0c38e7d84f911c72058a124c7f17b3c779a65 upstream.
Most smartarrays will tolerate it, but some new ones don't.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Note: this is a regression caused by commit
1ddd5049
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Chris Wright [Wed, 13 Jul 2011 17:14:33 +0000 (10:14 -0700)]
PCI: ARI is a PCIe v2 feature
commit
864d296cf948aef0fa32b81407541572583f7572 upstream.
The function pci_enable_ari() may mistakenly set the downstream port
of a v1 PCIe switch in ARI Forwarding mode. This is a PCIe v2 feature,
and with an SR-IOV device on that switch port believing the switch above
is ARI capable it may attempt to use functions 8-255, translating into
invalid (non-zero) device numbers for that bus. This has been seen
to cause Completion Timeouts and general misbehaviour including hangs
and panics.
Acked-by: Don Dutile <ddutile@redhat.com>
Tested-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lasse Collin [Sun, 24 Jul 2011 16:54:25 +0000 (19:54 +0300)]
XZ: Fix missing <linux/kernel.h> include
commit
81d67439855a7f928d90965d832aa4f2fb677342 upstream.
<linux/kernel.h> is needed for min_t. The old version
happened to work on x86 because <asm/unaligned.h>
indirectly includes <linux/kernel.h>, but it didn't
work on ARM.
<linux/kernel.h> includes <asm/byteorder.h> so it's
not necessary to include it explicitly anymore.
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Steven Rostedt [Tue, 5 Jul 2011 18:32:51 +0000 (14:32 -0400)]
tracing: Have "enable" file use refcounts like the "filter" file
commit
40ee4dffff061399eb9358e0c8fcfbaf8de4c8fe upstream.
The "enable" file for the event system can be removed when a module
is unloaded and the event system only has events from that module.
As the event system nr_events count goes to zero, it may be freed
if its ref_count is also set to zero.
Like the "filter" file, the "enable" file may be opened by a task and
referenced later, after a module has been unloaded and the events for
that event system have been removed.
Although the "filter" file referenced the event system structure,
the "enable" file only references a pointer to the event system
name. Since the name is freed when the event system is removed,
it is possible that an access to the "enable" file may reference
a freed pointer.
Update the "enable" file to use the subsystem_open() routine that
the "filter" file uses, to keep a reference to the event system
structure while the "enable" file is opened.
Reported-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Steven Rostedt [Tue, 5 Jul 2011 15:36:06 +0000 (11:36 -0400)]
tracing: Fix bug when reading system filters on module removal
commit
e9dbfae53eeb9fc3d4bb7da3df87fa9875f5da02 upstream.
The event system is freed when its nr_events is set to zero. This happens
when a module created an event system and then later the module is
removed. Modules may share systems, so the system is allocated when
it is created and freed when the modules are unloaded and all the
events under the system are removed (nr_events set to zero).
The problem arises when a task opened the "filter" file for the
system. If the module is unloaded and it removed the last event for
that system, the system structure is freed. If the task that opened
the filter file accesses the "filter" file after the system has
been freed, the system will access an invalid pointer.
By adding a ref_count, and using it to keep track of what
is using the event system, we can free it after all users
are finished with the event system.
Reported-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Peter Zijlstra [Tue, 28 Jun 2011 10:15:51 +0000 (12:15 +0200)]
irq_work, alpha: Fix up arch hooks
commit
0f933625e7b6c3d91878ae95e341bf1984db7eaf upstream.
Commit
e360adbe29 ("irq_work: Add generic hardirq context
callbacks") fouled up the Alpha bit, not properly naming the
arch specific function that raises the 'self-IPI'.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Cree <mcree@orcon.net.nz>
Link: http://lkml.kernel.org/n/tip-gukh0txmql2l4thgrekzzbfy@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Neuling [Mon, 4 Jul 2011 20:40:10 +0000 (20:40 +0000)]
powerpc/kdump: Fix timeout in crash_kexec_wait_realmode
commit
63f21a56f1cc0b800a4c00349c59448f82473d19 upstream.
The existing code it pretty ugly. How about we clean it up even more
like this?
From: Anton Blanchard <anton@samba.org>
We check for timeout expiry in the outer loop, but we also need to
check it in the inner loop or we can lock up forever waiting for a
CPU to hit real mode.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Robert Richter [Fri, 3 Jun 2011 14:37:47 +0000 (16:37 +0200)]
oprofile, x86: Fix nmi-unsafe callgraph support
commit
a0e3e70243f5b270bc3eca718f0a9fa5e6b8262e upstream.
Current oprofile's x86 callgraph support may trigger page faults
throwing the BUG_ON(in_nmi()) message below. This patch fixes this by
using the same nmi-safe copy-from-user code as in perf.
------------[ cut here ]------------
kernel BUG at .../arch/x86/kernel/traps.c:436!
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/0000:07:00.0/0000:08:04.0/net/eth0/broadcast
CPU 5
Modules linked in:
Pid: 8611, comm: opcontrol Not tainted 2.6.39-00007-gfe47ae7 #1 Advanced Micro Device Anaheim/Anaheim
RIP: 0010:[<
ffffffff813e8e35>] [<
ffffffff813e8e35>] do_nmi+0x22/0x1ee
RSP: 0000:
ffff88042fd47f28 EFLAGS:
00010002
RAX:
ffff88042c0a7fd8 RBX:
0000000000000001 RCX:
00000000c0000101
RDX:
00000000ffff8804 RSI:
ffffffffffffffff RDI:
ffff88042fd47f58
RBP:
ffff88042fd47f48 R08:
0000000000000004 R09:
0000000000001484
R10:
0000000000000001 R11:
0000000000000000 R12:
ffff88042fd47f58
R13:
0000000000000000 R14:
ffff88042fd47d98 R15:
0000000000000020
FS:
00007fca25e56700(0000) GS:
ffff88042fd40000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000074 CR3:
000000042d28b000 CR4:
00000000000006e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
Process opcontrol (pid: 8611, threadinfo
ffff88042c0a6000, task
ffff88042c532310)
Stack:
0000000000000000 0000000000000001 ffff88042c0a7fd8 0000000000000000
ffff88042fd47de8 ffffffff813e897a 0000000000000020 ffff88042fd47d98
0000000000000000 ffff88042c0a7fd8 ffff88042fd47de8 0000000000000074
Call Trace:
<NMI>
[<
ffffffff813e897a>] nmi+0x1a/0x20
[<
ffffffff813f08ab>] ? bad_to_user+0x25/0x771
<<EOE>>
Code: ff 59 5b 41 5c 41 5d c9 c3 55 65 48 8b 04 25 88 b5 00 00 48 89 e5 41 55 41 54 49 89 fc 53 48 83 ec 08 f6 80 47 e0 ff ff 04 74 04 <0f> 0b eb fe 81 80 44 e0 ff ff 00 00 01 04 65 ff 04 25 c4 0f 01
RIP [<
ffffffff813e8e35>] do_nmi+0x22/0x1ee
RSP <
ffff88042fd47f28>
---[ end trace
ed6752185092104b ]---
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 8611, comm: opcontrol Tainted: G D 2.6.39-00007-gfe47ae7 #1
Call Trace:
<NMI> [<
ffffffff813e5e0a>] panic+0x8c/0x188
[<
ffffffff813e915c>] oops_end+0x81/0x8e
[<
ffffffff8100403d>] die+0x55/0x5e
[<
ffffffff813e8c45>] do_trap+0x11c/0x12b
[<
ffffffff810023c8>] do_invalid_op+0x91/0x9a
[<
ffffffff813e8e35>] ? do_nmi+0x22/0x1ee
[<
ffffffff8131e6fa>] ? oprofile_add_sample+0x83/0x95
[<
ffffffff81321670>] ? op_amd_check_ctrs+0x4f/0x2cf
[<
ffffffff813ee4d5>] invalid_op+0x15/0x20
[<
ffffffff813e8e35>] ? do_nmi+0x22/0x1ee
[<
ffffffff813e8e7a>] ? do_nmi+0x67/0x1ee
[<
ffffffff813e897a>] nmi+0x1a/0x20
[<
ffffffff813f08ab>] ? bad_to_user+0x25/0x771
<<EOE>>
Cc: John Lumby <johnlumby@hotmail.com>
Cc: Maynard Johnson <maynardj@us.ibm.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Huang Ying [Thu, 14 Jul 2011 01:34:37 +0000 (09:34 +0800)]
kexec, x86: Fix incorrect jump back address if not preserving context
commit
050438ed5a05b25cdf287f5691e56a58c2606997 upstream.
In kexec jump support, jump back address passed to the kexeced
kernel via function calling ABI, that is, the function call
return address is the jump back entry.
Furthermore, jump back entry == 0 should be used to signal that
the jump back or preserve context is not enabled in the original
kernel.
But in the current implementation the stack position used for
function call return address is not cleared context
preservation is disabled. The patch fixes this bug.
Reported-and-tested-by: Yin Kangkai <kangkai.yin@intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/1310607277-25029-1-git-send-email-ying.huang@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>