review.tizen.org Git - platform/kernel/linux-starfive.git/log

staging: vchiq_arm: introduce is_adjacent_block

The check for an adjacent block is hard to read. So move it into a separate
inline function.

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1642968143-19281-4-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vchiq_debugfs: get the rid of n_log_entries

There is no need for this static variable, so use the macro directly.

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1642968143-19281-3-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vchiq_core: fix indentation in vchiq_log_dump_mem

This align the indentation in the var declaration of vchiq_log_dump_mem to
the other code.

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1642968143-19281-2-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: handle rtw_init_netdev_name() failure appropriately

rtw_init_netdev_name() calls dev_alloc_name() which allocates the name
for the device as per the given name format.
The name format is specified by the module parameter "ifname".
It returns a negative err code if the format is invalid. Handle this
error appropriately.
Cancel the timers ininitliazed by rtw_init_drv_sw() before calling
rtw_free_drv_sw() and then proceed to free the adapter.

Also, if register_netdev() fails then goto free_drv_sw instead of
goto handle_dualmac.

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vihas Mak <makvihas@gmail.com>
Link: https://lore.kernel.org/r/20220123181734.10402-1-makvihas@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: move get version func to where all other functions are

As a convention for the pi433 driver, all routines that deals with the
rf69 chip are defined in the rf69.c file. There was an exception to the
rule in which the uC version verification was being done directly
elsewhere. While at it, the Version Register hardcoded value was
replaced with a pre-existing constant in the driver.

This patch adds rf69_get_version function to rf69.c

Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Link: https://lore.kernel.org/r/20220108212728.GA7784@mail.google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: merge Init_ODM_ComInfo_88E and rtl8188e_init_dm_priv

rtl8188e_init_dm_priv is the only caller of Init_ODM_ComInfo_88E.
Merge the two functions.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220122170547.68378-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: ODM_RF_CALIBRATION is always set

The ODM_RF_CALIBRATION flag is set in Init_ODM_ComInfo_88E directly
after the driver is probed and it's never cleared.

Remove the flag and the code where it's set or checked.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220122170547.68378-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: ODM_RF_TX_PWR_TRACK is always set

The ODM_RF_TX_PWR_TRACK flag is set in Init_ODM_ComInfo_88E directly
after the driver is probed and it's never cleared.

Remove the flag and the one place where it's checked.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220122170547.68378-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: EntryMaxUndecoratedSmoothedPWDB is set but not used

The variable EntryMaxUndecoratedSmoothedPWDB in struct dm_priv
is set but not used. Remove it.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220122170547.68378-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unnecessary braces in rtw_xmit.c

Remove unnecessary braces reported by checkpatch.pl in rtw_xmit.c.

Signed-off-by: Marcelo Aloisio da Silva <marcelo.as@aol.com>
Link: https://lore.kernel.org/r/20220119034933.GA29744@snoopy
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove rtw_netif_stop_queue wrapper

Remove the rtw_netif_stop_queue wrapper function. Call
netif_tx_stop_all_queues directly.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220115165536.231210-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove rtw_netif_start_queue wrapper

Remove the rtw_netif_start_queue wrapper function. Call
netif_tx_start_all_queues directly.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220115165536.231210-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove rtw_netif_wake_queue wrapper

Remove the rtw_netif_wake_queue wrapper function. Call
netif_tx_wake_all_queues directly.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220115165536.231210-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: call msecs_to_jiffies in _set_timer

The _set_timer wrapper function takes a timeout in milliseconds.
Call msecs_to_jiffies to convert the timeout to jiffies. Don't do
the calculation ourselves.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220115165536.231210-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove _cancel_timer wrapper

Remove the _cancel_timer wrapper function and call del_timer_sync
directly.

None of the callers needs the bcancelled variable that's populated by
_cancel_timer, these variables can be removed in the calling functions.

rtw_surveydone_event_callback calls _cancel_timer only if it believes
that the timer is currently running. We can drop this. It's safe to
call del_timer_sync when the timer is not running. The timer in question,
scan_to_timer, is used only for the site survey command (the rtw_survey
functions) so we won't be stopping it while it's in use by someone else.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220115165536.231210-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove rtw_list_delete wrapper

Remove the rtw_list_delete wrapper function. Call list_del_init directly.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220115165536.231210-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unused PATH_LENGTH_MAX define

PATH_LENGTH_MAX in osdep_service.h is not used and can
be removed.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220115165536.231210-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unused bitshift function

The bitshift function from osdep_service.h is not used.
Remove it.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220115165536.231210-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unused macros

Remove some unused macros from osdep_service.h.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220115165536.231210-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unused externl variables

Remove a group of external variables which are not used in
osdep_service.h or in the files where osdep_service.h is included.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220115165536.231210-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert DBG_88E calls in core/rtw_sta_mgt.c

Convert the DBG_88E macro calls in core/rtw_sta_mgt.c to use pr_debug,
as their information may be useful to observers, and this gets the
driver closer to the point of being able to remove DBG_88E itself.

These calls are at points in the call chain where use of dev_dbg or
netdev_dbg isn't possible due to lack of device pointer, so plain
pr_debug is appropriate here.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220110090020.6800-8-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert DBG_88E calls in core/rtw_mlme_ext.c

Convert the DBG_88E macro calls in core/rtw_mlme_ext.c to use pr_debug
or netdev_dbg appropriately, as their information may be useful to
observers, and this gets the driver closer to the point of being
able to remove DBG_88E itself. Also remove some commented out
or unnecessary DBG_88E calls altogether.

Some calls are at points in the call chain where use of dev_dbg or
netdev_dbg isn't possible due to lack of device pointer, so plain
pr_debug is appropriate here.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220110090020.6800-7-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert DBG_88E calls in core/rtw_ioctl_set.c

Convert the DBG_88E macro calls in core/rtw_ioctl_set.c to use netdev_dbg,
as their information may be useful to observers, and this gets the
driver closer to the point of being able to remove DBG_88E itself.
Also remove one unnecessary DBG_88E call which was already commented
out.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220110090020.6800-6-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert DBG_88E calls in core/rtw_mlme.c

Convert the DBG_88E macro calls in core/rtw_mlme.c to use netdev_dbg,
as their information may be useful to observers, and this gets the
driver closer to the point of being able to remove DBG_88E itself.
Also remove some unnecessary DBG_88E calls altogether as all they do
is print the function name.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220110090020.6800-5-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert DBG_88E calls in core/rtw_iol.c

Convert the DBG_88E macro calls in core/rtw_iol.c to use pr_debug
or netdev_dbg appropriately, as their information may be useful to
observers, and this gets the driver closer to the point of being
able to remove DBG_88E itself.

Some calls are at points in the call chain where use of dev_dbg or
netdev_dbg isn't possible due to lack of device pointer, so plain
pr_debug is appropriate here.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220110090020.6800-4-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert DBG_88E calls in core/rtw_xmit.c

Convert the DBG_88E macro calls in core/rtw_xmit.c to use pr_debug
or netdev_dbg appropriately, as their information may be useful to
observers, and this gets the driver closer to the point of being
able to remove DBG_88E itself. Also remove some commented out
DBG_88E calls altogether.

Some calls are at points in the call chain where use of dev_dbg or
netdev_dbg isn't possible due to lack of device pointer, so plain
pr_debug is appropriate here.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220110090020.6800-3-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert DBG_88E calls in core/rtw_ieee80211.c

Convert the DBG_88E macro calls in core/rtw_ieee80211.c to use pr_debug
as their information may be useful to observers, and this gets the
driver closer to the point of being able to remove DBG_88E itself.

These calls are at points in the call chain where use of dev_dbg or
netdev_dbg isn't possible due to lack of device pointer, so plain
pr_debug is appropriate here.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220110090020.6800-2-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8723bs: Inserting blank line after declaration

Fix following checkpatch.pl warning by inserting blank line
WARNING: Missing a blank line after declarations

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
Link: https://lore.kernel.org/r/20220124034456.8665-4-jagathjog1996@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8723bs: Removed extra spaces between datatype and variable

Fix following checkpatch.pl warning by placing single space between
datatype and variable
WARNING: please, no space before tabs

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
Link: https://lore.kernel.org/r/20220124034456.8665-3-jagathjog1996@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8723bs: Placing opening { braces in previous line

Fix following checkpatch.pl error by placing opening {
braces in previous line
ERROR: that open brace { should be on the previous line

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
Link: https://lore.kernel.org/r/20220124034456.8665-2-jagathjog1996@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: use KBUILD_MODNAME instead of own module name definition

Remove own module name definition and use KBUILD_MODNAME instead, which
is the standard way of getting the module name.

While at it, one realignment was made to improve readability.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Link: https://lore.kernel.org/r/20220107234620.49900-3-gascoar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: remove unneeded MODULE_VERSION() usage

MODULE_VERSION() is useless for in-tree drivers given that only the kernel
version matters. Hence, remove it.

While at it, one realignment was made to improve readability.

Suggested by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Link: https://lore.kernel.org/r/20220107234620.49900-2-gascoar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Drop get_recvframe_data()

As done for rtl8723bs and r8188eu, drop get_recvframe_data(), as it
introduces an impossible value (NULL) for the compiler to check code
paths against which could result in nonsensical warnings.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Cc: Ivan Safonov <insafonov@gmail.com>
Cc: linux-staging@lists.linux.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220118193327.2822099-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Drop get_recvframe_data()

When building with -Warray-bounds, the following warning is emitted:

In file included from ./include/linux/string.h:253,
                 from ./arch/x86/include/asm/page_32.h:22,
                 from ./arch/x86/include/asm/page.h:14,
                 from ./arch/x86/include/asm/thread_info.h:12,
                 from ./include/linux/thread_info.h:60,
                 from ./arch/x86/include/asm/preempt.h:7,
                 from ./include/linux/preempt.h:78,
                 from ./include/linux/rcupdate.h:27,
                 from ./include/linux/rculist.h:11,
                 from ./include/linux/sched/signal.h:5,
                 from ./drivers/staging/rtl8723bs/include/drv_types.h:17,
                 from drivers/staging/rtl8723bs/core/rtw_recv.c:7:
In function 'memcpy',
    inlined from 'wlanhdr_to_ethhdr' at drivers/staging/rtl8723bs/core/rtw_recv.c:1554:2:
./include/linux/fortify-string.h:41:33: warning: '__builtin_memcpy' offset [0, 5] is out of the bounds [0, 0] [-Warray-bounds]
   41 | #define __underlying_memcpy     __builtin_memcpy
      |                                 ^

This is because the compiler sees it is possible for "ptr" to be a NULL
value, and concludes that it has zero size and attempts to copy to it
would overflow. Instead, remove the get_recvframe_data() entirely, as
it's not possible for this to ever be NULL.

Additionally add missing NULL checks after recvframe_pull() (which are
present in the rtl8712 driver).

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michael Straube <straube.linux@gmail.com>
Cc: Fabio Aiuto <fabioaiuto83@gmail.com>
Cc: linux-staging@lists.linux.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220118193327.2822099-3-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: Drop get_recvframe_data()

When building with -Warray-bounds, the following warning is emitted:

In file included from ./include/linux/string.h:253,
                 from ./arch/x86/include/asm/page_32.h:22,
                 from ./arch/x86/include/asm/page.h:14,
                 from ./arch/x86/include/asm/thread_info.h:12,
                 from ./include/linux/thread_info.h:60,
                 from ./arch/x86/include/asm/preempt.h:7,
                 from ./include/linux/preempt.h:78,
                 from ./include/linux/rcupdate.h:27,
                 from ./include/linux/rculist.h:11,
                 from ./include/linux/sched/signal.h:5,
                 from ./drivers/staging/rtl8723bs/include/drv_types.h:17,
                 from drivers/staging/rtl8723bs/core/rtw_recv.c:7:
In function 'memcpy',
    inlined from 'wlanhdr_to_ethhdr' at drivers/staging/rtl8723bs/core/rtw_recv.c:1554:2:
./include/linux/fortify-string.h:41:33: warning: '__builtin_memcpy' offset [0, 5] is out of the bounds [0, 0] [-Warray-bounds]
   41 | #define __underlying_memcpy     __builtin_memcpy
      |                                 ^

This is because the compiler sees it is possible for "ptr" to be a NULL
value, and concludes that it has zero size and attempts to copy to it
would overflow. Instead, remove the get_recvframe_data() entirely, as
it's not possible for this to ever be NULL.

Additionally add missing NULL checks after recvframe_pull() (which are
present in the rtl8712 driver).

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michael Straube <straube.linux@gmail.com>
Cc: Fabio Aiuto <fabioaiuto83@gmail.com>
Cc: linux-staging@lists.linux.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220118193327.2822099-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: do not probe the device if not in the DT

Since the WF200 VID/PID are not reliable, it's recommended to declare it
in the DT. Until now, if the device was not declared, the driver just
printed a warning and continue. But, the risk of a collision is too
high, the driver now returns an error.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-32-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: rename "config-file" DT attribute

"config-file" is too broad. Replace it by "silabs,antenna-config-file"
which is more explicit.

The attribute "config-file" is probably not widely used. This patch
obviously breaks setups that use this attribute.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-31-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: drop legacy compatible values

Values "silabs,wfx-sdio" and "silabs,wfx-spi" are deprecated for a while
now. We take advantage of getting out of the staging tree to drop them
and start from a blank sheet.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-30-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: fix firmware location

There is currently, a mismatch between the location of the firmware in
linux-firmware and the path written in the driver.

We take this opportunity to relocate the WF200 firmware in wfx/ instead
of silabs/.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-29-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: map 'compatible' attribute with board name

"WF200" only designates the chip. To make a WiFi board, the chip must be
associated with an antenna. The antenna configuration is located in
separate files (aka PDS files in Silabs wording). Currently, user has to
write in his DT something like:

    compatible = "silabs,wf200";
    config = "brd4001a.pds";

It is far better to embed a list of known boards (chip + antenna) in the
driver. So the user just have to declare:

    compatible = "silabs,brd4001a";

This patch add the configurations for the evaluation boards sold by
Silabs. To provide a full plug-and-play experience, the associated PDS
files[1] will be available in linux-firmware.

This patch does not break compatibility with existing setups.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-28-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: remove force_ps_timeout

ps_timeout should be in nl80211, not in debugfs. Let's remove it until
the driver is accepted.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-27-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: do not display functions names in logs

It is not necessary to prefix error logs with the function name when an
error message is unique in the code.

Note this patch still prefixes the message 'received event for
non-existent vif' with the function name since it is used several
times.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-26-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: replace compiletime_assert() by BUILD_BUG_ON_MSG()

It seems that BUILD_BUG_ON_MSG() is a bit more popular.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-25-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: use explicit labels for errors

Prefer fully named labels to handle errors instead of err0, err1, ...

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-24-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: fix structs alignments

Some structs members were not properly aligned.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-23-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: reformat comments on 100 columns

Until now, this driver was written in 80 columns style. However, since
all the functions are prefixed with "wfx_", this constraint is no more
respected in the last patches.

From the perspective of kernel Coding Style, it is not a problem since
it is now allowed to write code on 100 columns.

This patch just unify the code to use 100 columns in every comments.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-22-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: reformat code on 100 columns

Until now, this driver was written in 80 columns style. However, since
all the functions are prefixed with "wfx_", this constraint is no more
respected in the last patches.

From the perspective of kernel Coding Style, it is not a problem since
it is now allowed to write code on 100 columns.

This patch just unify the code to use 100 columns.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-21-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: prefix structs tx_policy and hwbus_ops with wfx_

All the types related to a driver should use the same prefix.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-20-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: prefix structs hif_* with wfx_

All the types related to a driver should use the same prefix.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-19-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: prefix tx_policy_is_equal() with wfx_

tx_policy_is_equal() was the only function from data_tx.c without the
prefix wfx_.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-18-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: prefix functions from debug.h with wfx_

All the functions related to a driver should use the same prefix.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-17-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: prefix functions from hwio.h with wfx_

All the functions related to a driver should use the same prefix.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-16-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: prefix functions from hif_*.h with wfx_

All the functions related to a driver should use the same prefix.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-15-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: fix ambiguous function name

The prefix 'ieee80211' is reserved for mac80211. It should not been
used.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-14-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: fix ambiguous function name

The prefix 'ieee80211' is reserved for mac80211. It should not been
used.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-13-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: preserve endianness of struct hif_ind_startup

The hardware fills struct hif_ind_startup with little endian values. So,
declare it with little endian fields.

It is now a bit more verbose to access to fields of struct
hif_ind_startup, but it is less confusing.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-12-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stagigg: wfx: replace magic number by HIF_ID_IS_INDICATION

Magic values are not recommended.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-11-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: replace magic value by WFX_HIF_BUFFER_SIZE

Magic values are not recommended.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-10-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: use IS_ALIGNED()

It "IS_ALIGNED(ptr, 4)" is more explicit than "ptr & 3".

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: remove useless #ifdef

In the old days, this file was shared with other projects. Obviously,
this "#ifdef __KERNEL__" have no reasons to be in the kernel.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-8-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: remove unnecessary braces

Braces are not necessary for single statement blocks

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: explain uncommon Makefile statement

I have got questions about this line from several reviewers. A comment
is definitively welcome.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: fix comment correctness

Using DMA with stack allocated buffers is not supported, whatever the
value of CONFIG_VMAP_STACK.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: fix missing headers

Each headers files should include every types it needs to compile (ie.
"gcc $CFLAGS -xc file.h" should compile)

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: fix HIF API license

Apache-2.0 is not allowed in the kernel.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wfx: fix Makefile and Kconfig licenses

License was missing in Kconfig.

Makefile license was GPL-2.0 while rest of the driver use GPL-2.0-only.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220113085524.1110708-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: merge ODM_ConfigBBWithHeaderFile with its callers

ODM_ConfigBBWithHeaderFile is a "multiplexer" for ODM_ReadAndConfig_...
functions. It's called only from phy_BB8188E_Config_ParaFile.

We can remove ODM_ConfigBBWithHeaderFile and call the
ODM_ReadAndConfig_... functions directly.

ODM_ReadAndConfig_PHY_REG_PG_8188E does not return an error status,
there's no need for a check.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220110124638.6909-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unused cck, ofdm and mcs rate defines

Remove some unused defines for cck, ofdm and mcs rates.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220110124638.6909-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: merge ODM_ConfigMACWithHeaderFile into PHY_MACConfig8188E

The ODM_ConfigMACWithHeaderFile function is only one line. Merge it into
PHY_MACConfig8188E, which is its only caller.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220110124638.6909-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: relay errors from ODM_ReadAndConfig_...

Most of the ODM_ReadAndConfig_... functions return an error status.
Update their callers to process these return values.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220110124638.6909-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: replace the READ_AND_CONFIG

The READ_AND_CONFIG macro builds a function name from chip type and
table name.

Remove the macro and use the resulting function names directly. This
makes the code easier to read.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220110124638.6909-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove constant function parameter

The only caller of ODM_ConfigRFWithHeaderFile sets rfpath to RF_PATH_A.
Remove the parameter and the check for RF_PATH_A inside the function.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220110124638.6909-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unused function parameter

ODM_ConfigRFWithHeaderFile does not use its content parameter.
Remove it.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220110124638.6909-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove a constant variable

The eRFPath variable in phy_RF6052_Config_ParaFile is always 0.

Remove the variable and use 0 directly. (enum rf_radio_path)eRFPath can
be replaced with RF_PATH_A, which is defined as 0.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220110124638.6909-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: fix phy_RF6052_Config_ParaFile error handling

Fix the error handling in phy_RF6052_Config_ParaFile.
We can simply return rtStatus.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220110124638.6909-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: we always enqueue in rtw_set_chplan_cmd

The only caller of rtw_set_chplan_cmd requests that the message be
enqueued and not sent directly.

Remove the enqueue parameter and the code for direct sending.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220108124959.313215-13-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove HAL_*_ENABLE defines

HAL_(MAC|BB|RF)_ENABLE are always set. Remove the defines and the
checks where they are used.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220108124959.313215-12-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: HW_VAR_MEDIA_STATUS1 is never set

The HW_VAR_MEDIA_STATUS1 hal variable is never set. Remove its define
and the code to set it.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220108124959.313215-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: CurrentCckTxPwrIdx is set but not used

CurrentCckTxPwrIdx in struct hal_data_8188e is set but not used.
It can be removed.

The phy_PowerIndexCheck88E function is now empty. Remove it as well.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220108124959.313215-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: CurrentOfdm24GTxPwrIdx is set but not used

CurrentOfdm24GTxPwrIdx in struct hal_data_8188e is set but not used.
It can be removed.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220108124959.313215-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: CurrentBW2024GTxPwrIdx is set but not used

CurrentBW2024GTxPwrIdx in struct hal_data_8188e is set but not used.
It can be removed.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220108124959.313215-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: CurrentBW4024GTxPwrIdx is set but not used

CurrentBW4024GTxPwrIdx in struct hal_data_8188e is set but not used.
It can be removed.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220108124959.313215-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove obsolete defines and comments

Remove some unused phycfg defines and obsolete comments.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220108124959.313215-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove unused chip type settings

Remove some unused defines and macros related to chip type.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220108124959.313215-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: ODM_BB_CCK_PD is always set

The ODM_BB_CCK_PD flag is always set.

Remove the flag and the check if ODM_BB_CCK_PD is not set.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220108124959.313215-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: ODM_BB_FA_CNT is always set

The ODM_BB_FA_CNT flag is always set.

Remove the flag and the code to check if ODM_BB_FA_CNT is not set.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220108124959.313215-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: ODM_MAC_EDCA_TURBO is always set

The ODM_MAC_EDCA_TURBO flag is always set for chips that are supported by
this driver. Remove the flag and the one place where it's checked.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220108124959.313215-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: remove redundant result variable

Return value from ips_netdrv_open() directly instead
of taking this in another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Link: https://lore.kernel.org/r/20220110013240.644190-1-chi.minghao@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove rtw_os_recv_resource_alloc()

Merge rtw_os_recv_resource_alloc() into _rtw_init_recv_priv() and
remove rtw_os_recv_resource_alloc().

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220108082736.16788-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rtw_os_recv_resource_init() does nothing

The function rtw_os_recv_resource_init() just returns _SUCCESS and
the return value is not checked by the caller. Remove the function.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220108082736.16788-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rtw_os_recv_resource_free() is empty

The function rtw_os_recv_resource_free() is empty. Remove it.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220108082736.16788-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert switch to if statement in mgt_dispatcher()

The 'switch (GetFrameSubType(pframe))' in mgt_dispatcher() has only
one case that does something different than the default case. Convert
the switch to an if statement to improve readability.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220108082736.16788-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: rtw_hostapd_mlme_rx() is empty

The function rtw_hostapd_mlme_rx() is empty. Remove it.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220108082736.16788-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert/remove DBG_88E calls in os_dep/usb_ops_linux.c

Convert DBG_88E macro calls in os_dep/usb_ops_linux.c to use netdev_dbg
when they may display useful information, and remove erroneous DBG_88E
calls entirely.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220108005550.26264-6-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert DBG_88E call in core/rtw_cmd.c

Convert the DBG_88E macro call in core/rtw_cmd.c to use netdev_dbg
as its information may be useful to observers, and this gets the
driver closer to the point of being able to remove DBG_88E itself.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220108005550.26264-5-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove DBG_88E call from os_dep/osdep_service.c

Remove the single DBG_88E macro call from os_dep/osdep_service.c, as it
is unreachable anyway. This gets the driver closer to the eventual
removal of DBG_88E itself.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220108005550.26264-4-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert DBG_88E calls in os_dep/xmit_linux.c

Convert three DBG_88E macro calls in core/rtw_ap.c to use netdev_dbg
as their information may be useful to observers, and this gets the
driver closer to the point of being able to remove DBG_88E itself.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220108005550.26264-3-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: convert/remove DBG_88E calls in core/rtw_ap.c

Convert DBG_88E macro calls in core/rtw_ap.c to use netdev_dbg when they
may display useful information, and remove erroneous DBG_88E calls
entirely.

This leaves six empty static functions which only had DBG_88E calls,
so just remove them:

update_bcn_fixed_ie
update_bcn_htcap_ie
update_bcn_htinfo_ie
update_bcn_rsn_ie
update_bcn_wpa_ie
update_bcn_wmm_ie

also modifying the if blocks/switch cases that invoke them to no longer do
so. This goes further towards the goal of removing this non-standard
debugging code.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220108005550.26264-2-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>