bluez5: Allow method calls over dbus for bluetooth daemon

This patch changes the dbus policy settings in order to allow
calling methods over dbus. bluez5 and pulseaudio rely on this
mechanism to configure media end points. Previously bluetoothd
was failing to configure the media end points with error
org.freedesktop.DBus.Error.AccessDenied, due to which bluetooth
headset and smartphone were unable to connect in A2DP mode.

(From OE-Core rev: eb3a380301b8f7ec34d3649c386214d39355eaa0)

Signed-off-by: Yasir-Khan <yasir_khan@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

alsa-utils: upgrade to 1.0.28

Changelog:
http://www.alsa-project.org/main/index.php/Changes_v1.0.27.2_v1.0.28

0001-alsactl-don-t-let-systemd-unit-restore-the-volume-wh.patch updated.

(From OE-Core rev: 5a3331b7ee8bb565ebb3823fc23123120ccd653d)

(From OE-Core rev: 162fa884c02b77517ebb131de314b38cf9a1244f)

Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd: Adding RRECOMMENDS for os-release

Systemd depends on the os-release hence adding
RRECOMMENDS for the systemd package.

[ RB - updated for 216 ]

(From OE-Core rev: 003d16fbd54f59422aab917b8f3bf2aec4ab50b6)

Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Sujith H <Sujith_Haridasan@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

os-release: Adding a new recipe for operating system identification

The /etc/os-release will have the operating system identification data.
Tested on target with systemd enabled. Here is the sample file looks
in the file:

ID=poky-ivi-systemd
NAME=Yocto GENIVI Baseline (Poky/meta-ivi)
VERSION=6.0+snapshot-20140721 (daisy)
VERSION_ID=6.0+snapshot-20140721
PRETTY_NAME=Yocto GENIVI Baseline (Poky/meta-ivi) 6.0+snapshot-20140721 (daisy)

(From OE-Core rev: 8a12350e00b5443a24f3d6c7693fdde9fcb7319f)

Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Sujith H <Sujith_Haridasan@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

pixman: upgrade to 0.32.6

Revert a patch to the MIPS-specific code that was causing compile failures.

(From OE-Core rev: ace56dcd6eed1ab92af9bdf5bd6d9b11e35a0917)

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gtk+3: update to 3.12.2

fix-build-when-wayland-backend-enabled.patch removed as the issue
is fixed in upstream.

(From OE-Core rev: 59fe6f91b39c4aa67e7e1734c3731d49c7ea8376)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

pango: update to 1.36.6

(From OE-Core rev: 715f62c5960263ecb0b181cab16ed28345f05189)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libpng: update to 1.6.13

License terms have not changed. In case of LICENSE and png.h lines 0-15
the version numbers and release dates have changed. In case of png.h lines
229-343 the text has not changed at all, but old line numbers were not
pointing to correctly to the licensing terms segment.

(From OE-Core rev: efb760b19f3f88f509bfbc44a08c9c8c03baf6bc)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libpng: drop unnecessary automake requirement lowering patch

Automake recipe provides automake 1.14.1 anyway

(From OE-Core rev: 3e8ce8508356112e07e37734d228494a840cf04c)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gtk+2: update to 2.24.24

(From OE-Core rev: 64a433278d525859c661d8a1e50cc0817be12ac3)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libxkbcommon: Add missing dependency on xkeyboard-config

libxkbcommon depends on xkeyboard-config

(From OE-Core rev: ca14b0c0b5a6653336c79d8ec80e2cdef3f9239e)

Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com>
Signed-off-by: Abhijit Potnis <abhijit_potnis@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstate: Add extra intercept functions SSTATEPOSTCREATEFUNCS

In some cases we do either need to add extra sstate manipulation
functions, or change the existing modification functions. This patch
parametrizes it to SSTATEPOSTCREATEFUNCS after sstate_create_package

(From OE-Core rev: ed5fb9c69fcf0f6e8e98f72ac753c66119468ea5)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_manager.py: use RPM_PREFER_ELF_ARCH

Use RPM_PREFER_ELF_ARCH to instead of RPM_PREFER_COLOR as rpm upstream
suggested, and use "4" to instead of "3" since it is a bit mask (not
enumeration), so we need "4" here.

(From OE-Core rev: 8dcfa7143a6690455c3bd5772621f142f2d9e559)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

perf: add libunwind support

Add a new feature named 'perf-libunwind'. Adding this support to perf allows it
to do stack traces on ARM - thumb2 and MIPS targets. PERF_FEATURES variable in
perf-features.inc will enable the perf-libunwind.

(From OE-Core rev: 10dfa4ee4e05841be3d3caaa28778aa40b782f97)

Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libunwind: add recipes

Add libunwind from meta-oe to oe-core, since perf depends on it.

(From OE-Core rev: aefddc23eeda9b46c1bb3ac776c8bff15f89707c)

Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lighttpd: install config file without execute permissions

(From OE-Core rev: de8d70ccd846167df31037b7a89f7d13f6731cf6)

Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sudo: make sudoers a config file

(From OE-Core rev: c840369a65ee5041154e12fdd8919938856a0a6c)

Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

insane.bbclass: add QA check: file-rdeps

The ipk or deb can't depend on file such as "/bin/bash" or
"/usr/bin/perl", so it knows nothing about the pkg depends bash or perl,
thus there would be dependencies problems when we run "apt-get
install/remove <pkg>" on the target, this check can help us find the
issues and then fix them manually.

* Benefits:
  - Help to fix file rdepends issues for ipk and deb
  - Help to fix abnormal rdepends.
  - Help to check whether the rdepends is OK or not after build each
    recipe (don't have to install to the image), for example, a recipe may
    generate 10 binary packages, only a part of them will be installed to
    the image by default, we can know whether the rdepends are OK or
    not for the ones which are installed, but can't know the ones which
    are not installed, this patch can help check all the 10 binary
    packages' rdepends.

* Basic designs:
  - Get all the RDEPENDS on the chain.

  - Get the pkg's FILERPROVIDES from oe.packagedata.read_subpkgdata()
    and save to set filerdepends.

  - Get each RPDEPENDS' FILERPROVIDES, RPROVIDES and FILERPROVIDESFLIST,
    and save to set rdep_rprovides.

  - Do the set "filerdepends -= rdep_rprovides" and QA issue if
    filerdepends is not null.

[YOCTO #1662]

(From OE-Core rev: cd5e0f01cdb4e7c759c01cf3f87952a20253737c)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_manager: RpmPkgsList: determine rpm version

Do not set the rpm_version to 5 if it is not provided, instead
determine the real rpm version.

(From OE-Core rev: 48beaee2e5b2b4ae35c596c19f8a38e0ff4427e9)

(From OE-Core rev: fe4ad726d0dc63be73f885598e216b8eb927668a)

Signed-off-by: Kévin THIERRY <kevin.thierry@open.eurogiciel.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: tinfoil: add a means of enabling variable history tracking

Unfortunately it seems like the external use of the cooker
enableDataTracking() function broke at some point since the code that
reads it now runs within BBCooker's constructor. Since this now has to
be done early, add a parameter to Tinfoil's constructor to allow
enabling variable history tracking.

Fixes [YOCTO #6676].

(Bitbake rev: a9439b136f55f3f0e80ff053cd3b159da69ba362)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: fix some code spacing issues

Code is related to the basetable templates files.
It had mixed tabs and spaces and was miss aligned in various places,
making it hard to read.

(Bitbake rev: cdaea8951df6b707afd1fefbf22295088256dd6f)

Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: use cookies for count and sorting in templates tables

Until now cookies were used to save which columns were shown and which
were hidden in toaster tables. The tables from the templates also have
functionalities like sorting the entries on a certain column and
limiting the number of entries displayed on a page. The later however
were not saved using cookies. This patch brings this new feature.

The cookies are not saved only in the front-end. They are saved both
in the frontend in case the user uses the inputs/buttons to change
a parameter and also in the backend in case the user specifies manually
using GET variables the value of the parameters.

When no GET parameters are given the views will redirect the url to one
containg the parameters saved as cookies. When no cookies exist, default
values will be used.

[YOCTO #6126]

(Bitbake rev: 880b58c845e3a501fa90d24e1bd89c87ca84b709)

Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: do not save objects in session

In order to avoid problems when using JSON serializer for
saving sessions, we move from storing the objects themselves
in the session to storing the object id and reloading the
object when retrieved.

This allows, for example, to use cookie-storage sessions if the
infrastructure owner so desires.

(Bitbake rev: 39d0f0c2e87d4b161f1eeaa2657e61b5a6bc9ee2)

Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: enable SSH-based remote build support

We enable support for starting builds on remote machines
through SSH. The support is limited to poky-based distributions.

We refactor localhost build support and we update
bldcontrol application tests to uniformely test the APIs
of localhost and SSH build controllers.

[YOCTO #6240]

(Bitbake rev: c2ad9c9bb83f61c171434324df8c4d5ee655a556)

Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: bitbake server listen on all interface

We change the toaster starting script to make the
bitbake server listen on all interfaces on the local machine.

This is needed to be able to receive a controlling client
running on a remote machine.

(Bitbake rev: 137179eafca8d1a5a69b6302f8cc8961be3b45c4)

Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: rename bldviewer projecttags custom tagset

We rename the projecttags in bldviewer.templatetags to
simple_projecttags in order to avoid conflict with the
similarly named tagset in toastergui.

The conflict leads to an intermittent bug where proper
tags are not read correctly since Django uses only the
module name as global tag library identificator.

(Bitbake rev: a37f2c194d7e59611177cb8755524b7ad702fe91)

Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

alsa-lib: libasound should runtime depends on alsa-conf

Make libasound runtime depends on alsa-conf to install alsa-conf to rootfs.

(From OE-Core rev: e72aac2ae9e5fce1715fa04b7e94034fd06892d9)

Signed-off-by: Zidan Wang <b50113@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rpmresolve: ignore null requires

It is not a problem if a package requires nothing (similar to RDEPENDS
is null), for example, these packages depends on nothing:

[snip]
alsa-conf-base
base-files
eglibc-binary-localedata-en-us
xserver-xf86-config
[snip]

The rpmresolve-native's algorithm is:
===fake code
for pkg in pkg1, pkg2, pkg3:
    rc = get_req(pkg)
return rc
===fake code

Suppose of the 3 pkgs requires null:
- We are lukcy if pkg1 or pkg2 is null, nothing happend.
- We are *not* lukcy if pkg3 is null, and will get the error when "INHERIT +=
  'buildhistory'":
  ERROR: Cannot get the package dependencies. Command
  '/path/to/x86_64-linux/usr/bin/rpmresolve -t /path/to/var/lib/rpm' returned 1:

This patch fixes the problem.

(From OE-Core rev: 2f234160ff4e9eccd8794a31df851b96328f6b74)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemtap: Cross compilation fix

This is a cross compilation fix. It allows systemtap to find the
kernel map file in the right place, i.e. in the kernel build tree.
Without this fix it takes a map file from the build host, if available.

(From OE-Core rev: 787bed708676fc04aee2850825e803273152f657)

Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com>
Signed-off-by: Muzaffar Mahmood <muzaffar_mahmood@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemtap: Fixed probe syscall.sendfile failure

Marked __syscall.compat_sendfile as optional

(From OE-Core rev: 74bfb662246411aa062cd8b2acd37be1bbed39d3)

Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com>
Signed-off-by: Muzaffar Mahmood <muzaffar_mahmood@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

useradd-staticids.bbclass: Fix for Bug 6633

When using the useradd-staticids.bbclass under meta/classes,
this error occurs:
"<username> - <username>: Username  does not have a static uid defined."
There was a problem with the regular expression for parsing parameters,
it was sometimes returning an empty string.

I have fixed this by skipping empty strings.

(From OE-Core rev: f249ef32709069a2680b92dc5a5b4f6545d014b7)

Signed-off-by: Fabrice Coulon <fabrice@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_rpm: Add optional improved directory handling

During spec generation, ideally directories should not be auto
packaged under the %file section of rpm packages but take ownership of
specific directories.

* packages only empty directories or explict directory.
   See:
       - http://www.rpm.org/max-rpm/s1-rpm-inside-files-list-directives.html
       - "The %dir Directive"

* This will prevent the overlapping of security permission.
   For example, in Tizen the directory /etc have smack label 'System::Shared'
   So Only one package should own and set the label of /etc to prevent
   the overwriting of the smack label.

Existing behaviour is maintained if DIRFILES is not set. If it is set,
the modified behaviour is used. If can be set to an empty value by
core recipes to trigger the modified behaviour.

[RP: Modified to allow optional usage of DIRFILES]
(From OE-Core rev: 0e33d232916125ba5305ced7200cc00f8b5f7b22)

Signed-off-by: Ronan Le Martret <ronan@fridu.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd: enable forwarding messages to syslog daemon

In systemd_216, journald by default doesn't forward messages to
syslog daemon. This breaks the oeqa testing cases. So we enable
forwarding the messages for now.

(From OE-Core rev: 67ddca4a5533328ff95ab61610b6a1db24f57e35)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

run-postinsts.service: remove redundant line

The basic.target itself requires sysinit.target, so there's no
need to write this redundant line in the run-postinsts unit file.

(From OE-Core rev: 28835fcd78fd35db6d3bd7ee2be16904ddf11991)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

modutils-initscripts: mask modutils in case of systemd

We need to prevent the init script from running via systemd because
its functionality has been implemented interanlly in systemd.

In a systemd system, we can add configuration files under
/etc/modules-load.d/ to make things work.

(From OE-Core rev: 8fc304a59bb3977146645fe2c3570a3aaa4aac39)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

psplash: mask psplash in case of systemd

We need to prevent the psplash init script from running via systemd
because the script is supposed to be used by sysvinit system and it
doesn't have any real effect in a systemd based system.

(From OE-Core rev: 2e847db3ac3333a68b721b11624f4f515bda7ccf)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

v86d: mask fbsetup when necessary

When 'sysvinit' and 'systemd' are both in DISTRO_FEATURES, we need
to prevent the init script from running via systemd.
This is because that the functionality has been implemented internally
in systemd.

(From OE-Core rev: 2236678e38b22b763de8322d90585cbf648a448c)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

keymaps: mask keymap when necessary

When 'sysvinit' and 'systemd' are both in DISTRO_FEATURES, we need
to prevent the init script from running via systemd.
This is because that the functionality of the init script has implemented
in systemd internally.

(From OE-Core rev: 8cfba07e24dae3d1837ccb5cb04e11f362519b0a)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

initscripts: mask several init scripts

We now support executing scripts under /etc/rcS.d. So we need to
mask several more init scripts here to prevent them from running
at boot time.

(From OE-Core rev: c8f9527f18e5dd813c0330ba409875d34c36f6ab)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

packagegroup-core-boot: conditionally rdepend on VIRTUAL-RUNTIME_initscripts

If we are building a systemd image with 'sysvinit' not in DISTRO_FEATURES,
the initscripts should not be installed into the image, as they are useless.
What's more, we as now support executing scripts under /etc/rcS.d, the
boot time will be increased by these scripts as the systemd will try to
translate them into temporary service files.

These init scritps are actually needed only when 'sysvinit' is in
DISTRO_FEATURES.

(From OE-Core rev: 74b931909e58fc581bb52c1af1f3ae26602980f3)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

keymaps: remove dependency on initscripts

The 'keymaps' package actually doesn't have runtime dependency on
VIRTUAL-RUNTIME_initscripts, thus removing this dependency.

(From OE-Core rev: 2cf66a552a4966cb9c2f2475c622560cbe9db07b)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

at: inherit update-rc.d to handle sysv init script

Inherit update-rc.d.bbclass to handle sysv init script.
Also make the 'at' daemon start in runlevel 2,3,4,5 instead of S.

(From OE-Core rev: a761d5fcd1880c8cee96f1f3198093fd92d08c77)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

at: remove dependency on initscripts

The 'at' package actually doesn't have runtime dependency on
VIRTUAL-RUNTIME_initscripts, so remove this dependency.

(From OE-Core rev: 38359227215ad9f2d55740e25405f187771131d0)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rpcbind: avoid entering failed status after stopping daemon

Exiting with '2' is actually expected with rpcbind, because it catches
SIGTERM and exits with '2' explicitly.

The related code is as follows.

(void) signal(SIGTERM, terminate);

/*
 * Catch the signal and die
 */
static void
terminate(int dummy /*__unused*/)
{
        close(rpcbindlockfd);
        unlink(_PATH_RPCBINDSOCK);
        unlink(RPCBINDDLOCK);
        syslog(LOG_ERR,
                "rpcbind terminating on signal. Restart with \"rpcbind -w\"");
        write_warmstart(); /* Dump yourself */
        exit(2);
}

(From OE-Core rev: 1bfc6a45e7ba81d3537ea3ae8b176f5a9c206eaa)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

cups: add systemd support

Add systemd unit files.

Also remove sysvinit related files if 'sysvinit' is not in
DISTRO_FEATURES.

(From OE-Core rev: 020065d3c57ccdc86c47cd0fc288071cdd194bbc)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

cups: make cups daemon start correctly

The cups daemon needs the lpadmin group to start correctly.

Also add 'procps' to RDEPENDS if 'sysvinit' is in DISTRO_FEATURES,
because the init script shipped with cups needs it.

(From OE-Core rev: a8b2f086034585f3e115db3055575833922e3a59)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

acpid: upgrade to 2.0.22 and add systemd support

For acpid needs to upgrade to work correctly with the new kernel.
The new version now uses autotools.

Also add systemd unit file.

(From OE-Core rev: 93805abedb5563a91886f330153b179033a29d11)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

dhcp: add systemd service files

Add dhcpd.service and dhcrelay.service to support systemd systems.

(From OE-Core rev: 5f40081b0b9867bc167057712b04b3c1afb8a20d)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd: add support for executing scripts under /etc/rcS.d

This patch adds support for systemd to execute scripts under /etc/rcS.d.

To be compitable, all services translated from /etc/rcS.d/ scripts would
run before services translated from /etc/rcN.d scripts.

[YOCTO #5159]

(From OE-Core rev: 90bb8e8f9bc2454590d230b209fc749ea7270b9e)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

v86d: set INHIBIT_UPDATERCD_BBCLASS if 'sysvinit' not in DISTRO_FEATURES

Set INHIBIT_UPDATERCD_BBCLASS to "1" if 'sysvinit' is not in DISTRO_FEATURES.

The functionality of the init script 'fbsetup' is implemented internally in
systemd. So fbsetup is not installed if 'sysvinit' is in DISTRO_FEATURES.

That's why we need to set INHIBIT_UPDATERCD_BBCLASS to "1" to avoid
generation of update-rc.d related preinst/postinst scripts.

(From OE-Core rev: 640a2231597d74517527ebedb6fd141278ba06f4)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd: add kbd-keymaps to RRECOMMENDS of systemd-vconsole-setup

systemd-vconsole-setup.service not only configures font but also
keymaps.

(From OE-Core rev: ffcd4bf2198171c9663f72d4499d5d55c29abf40)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

keymaps: fix for systemd

Only install 'keymap.sh' script if 'sysvinit' is in DISTRO_FEATURES.
This is because systemd internally provides a mechanism to implement
the functionality this script tries to implement. Please see
systemd-vconsole-setup.service for more details.

Also we set 'INHIBIT_UPDATERCD_BBCLASS' to "1" if 'sysvinit' is not
in DISTRO_FEATURES.

(From OE-Core rev: 5e0aa114241b956f61cf852e1f4ff41b576adff4)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

alsa-state: fix pkg_postinst and set INHIBIT_UPDATERCD_BBCLASS

As alsa-state inherits update-rc.d, the update-rc.d part inpostinst script
has already been handled in update-rc.d.bbclass.

Besides, we need to set INHIBIT_UPDATERCD_BBCLASS to "1" if 'sysvinit'
is not in DISTRO_FEATURES. This is because the init script is not installed
in such situation, adding update-rc.d part in the preinst/postinst scripts
just makes no sense.

(From OE-Core rev: 9b9da6667b606a56c89abc1b458f52dcca9774e9)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

update-rc.d: fix logic in populate_packages_updatercd

The 'and' logic for the check is wrong. To make things clear, please
see the example below.

Say that we have a recipe A, which has a sysv-init style init script named
initA and no corresponding service file. The recipe inherits update-rc.d,
but it doesn't inherit systemd.bbclass. The DISTRO_FEATURES has 'systemd'
inside it, but it doesn't have 'sysvinit'. Now if we build an image, with
the 'and' logic in the check, the symlinks for initA would not be installed
into /etc/rc?.d directory.
This is incorrect. Because there's no corresponding service. The symlinks
in /etc/rc?.d/ should be created so that the service would be correctly
started at boot time.

The logic should really be 'or' in the check. This is actually what the code
was when it was originally written.

Several different situations are listed below to prove the correctness of the
'or' logic.

If 'sysvinit' is in DISTRO_FEATURES, the initA script would always be installed
with corresponding preisnt/postinst generated and added.

If 'sysvinit' is not in DISTRO_FEATURES, we have three situations.
1) A has initA and A.service.
   In such situation, systemd.bbclass would set INHIBIT_UPDATERCD_BBCLASS,
   so no preinst/postinst about update-rc.d would be added and the symlinks
   for initA would not be created.

2) A has initA, and the functionality of initA is not implemented internally
   in systemd.
   In such situation, symlinks for initA would be installed.

3) A has initA, and the functionality of initA is implemented internally in
   systemd or in some other recipe.
   Examples for such situation are alsa-state and keymaps in OE.
   In such situation, we need to set INHIBIT_UPDATERCD_BBCLASS in the recipe
   so that there would be no preinst/postinst scripts about update-rc.d added.

(From OE-Core rev: 6272c81509bbdb5d602056ceaa6f2c02bbf47a41)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd: make runlevel work in non-runlevel targets

Previously, after booting into the targets like multi-user.target or
graphical.target, the output of `runlevel' command is 'unknown'.

This is confusing for users. Normally, we would expect mutli-user.target
would have a `runlevel' output of 'N 3'.
This is the behaviour of Fedora20.

This patch installs symlinks for systemd-update-utmp-runlevel.service
in do_install task to fix the above problem.

(From OE-Core rev: cb7e692ec895ff9c15966faf29c9a84c0e78cdf5)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd: add PACKAGECONFIG for 'journal-upload'

Add PACKAGECONFIG for 'journal-upload' and disable it by default.
Once enabled, it will add 'curl' to its dependency.

(From OE-Core rev: b52c028252270c7bddc71554089fb184e52c5870)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

systemd: upgrade to 216

Upgrade systemd from 213 to 216.

systemd-older-kernel.patch is removed as it's fixed in 216.

0001-uClibc-doesn-t-implement-pwritev-preadv.patch is removed because
the file it patches has been removed from the project.

0001-util-Including-missing.h-to-get-MAX_HANDLE_SZ.patch is removed because
it has been merged.

0001-missing.h-add-fake-__NR_memfd_create-for-MIPS.patch is backported
to fix compilation error for mips.

Below are the required kernel versions for systemd 216.
        Linux kernel >= 3.0
        Linux kernel >= 3.3 for loop device partition support features with nspawn
        Linux kernel >= 3.8 for Smack support

(From OE-Core rev: 58c432b2725ad8b78d02cb91a6ab405d425c01cc)

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qemu-native: only depends on libxext-native when x11

Fixed when build without x11 in DISTRO_FEATURES:
ERROR: libxext-native was skipped: missing required distro feature 'x11' (not in DISTRO_FEATURES)

(From OE-Core rev: 012c7fbe0a21e469db5112873e778ff7c3b17237)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

piglit: add bash to RDEPENDS_piglit

Bash:
piglit/usr/lib/piglit/tests/asmparsertest/make_test_list.sh:#!/bin/bash
piglit/usr/lib/piglit/tests/asmparsertest/vp-tex.sh:#!/bin/bash
piglit/usr/lib/piglit/tests/spec/glsl-1.10/variable-index-read.sh:#!/bin/bash
piglit/usr/lib/piglit/tests/spec/glsl-1.10/variable-index-write.sh:#!/bin/bash
piglit/usr/lib/piglit/tests/spec/arb_shader_texture_lod/compiler/make_tex_lod_tests.sh:#!/bin/bash
piglit/usr/lib/piglit/tests/spec/glsl-1.20/execution/outerProduct-const.sh:#!/bin/bash
piglit/usr/lib/piglit/tests/spec/glsl-1.20/execution/outerProduct.sh:#!/bin/bash
piglit/usr/lib/piglit/tests/spec/glsl-1.20/compiler/built-in-functions/outerProduct-invalid-parameters.sh:#!/bin/bash
piglit/usr/lib/piglit/tests/glslparsertest/glsl2/make_tex_lod_tests.sh:#!/bin/bash
piglit/usr/lib/piglit/tests/glslparsertest/glsl2/make_tex_rect_tests.sh:#!/bin/bash

The bash scripts are in the tests directory, we had planned to move the
tests into the ptest pkg, but that would make piglit unusable without
installing piglit-ptest.

(From OE-Core rev: ece99c85c27a546ea59a78875f630e82270c3177)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

scripts/contrib/build-perf-test: Update eglibc -> glibc

(From OE-Core rev: 928fc6c3652ba5db87e1f1c7923972d85c31bc08)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xserver-nodm-init: Only start in runlevel 5

Runlevel 3 is often multi-user without X, so don't start the X
server in runlevel 3. This allows one to start up a machine without
X running from the bootloader.

(From OE-Core rev: 116b8a48f0d701d8f0b7807144ffdb708aad215e)

Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rpcbind: Make user's home directory /

(From OE-Core rev: fbd068e23e16746d89c0bb60c96edd705da27a35)

Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/compress_doc.bbclass: compress man/info pages

A distribution compression policy should be established, and used by all
packages. It compressed man pages in ${mandir} and info pages in ${infodir}

1. The doc will be compressed to gz format by default, which is configured
in ${DOC_COMPRESS}

2. It will automatically correct the compressed doc which is not
in ${DOC_COMPRESS} but in ${DOC_COMPRESS_LIST} to the format
of ${DOC_COMPRESS} policy

3. It is easy to add a new type compression by editing
local.conf, such as:
...
DOC_COMPRESS_LIST_append = ' abc'
DOC_COMPRESS = 'abc'
DOC_COMPRESS_CMD[abc] = 'abc compress cmd ***'
DOC_DECOMPRESS_CMD[abc] = 'abc decompress cmd ***'
...

[YOCTO #1238]

(From OE-Core rev: 5c833e188bbf25c35c24f78eaa761a191d6b5801)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

perf.bb: fix multilib build

Fixed:
$ bitbake perf lib32-perf
ERROR: QA Issue: lib32-perf: Files/directories were installed but not shipped
  /usr/lib64
  /usr/lib64/traceevent
  /usr/lib64/traceevent/plugins
  /usr/lib64/traceevent/plugins/plugin_function.so
  /usr/lib64/traceevent/plugins/plugin_scsi.so
  /usr/lib64/traceevent/plugins/plugin_hrtimer.so
  /usr/lib64/traceevent/plugins/plugin_kmem.so
  /usr/lib64/traceevent/plugins/plugin_jbd2.so
  /usr/lib64/traceevent/plugins/plugin_xen.so
  /usr/lib64/traceevent/plugins/plugin_mac80211.so
  /usr/lib64/traceevent/plugins/plugin_cfg80211.so
  /usr/lib64/traceevent/plugins/plugin_sched_switch.so
  /usr/lib64/traceevent/plugins/plugin_kvm.so [installed-vs-shipped]

The perf.do_configure edits kernel's
${STAGING_KERNEL_DIR}/tools/perf/config/Makefile, there would be
problems since kernel doesn't have multilib, and the build result is
undetermined.

Previously, the sed command changed libdir to /usr/lib64 (or 32) in the
Makefile, so the build result was different if we build perf (64) first
or lib32-perf first.

Use the weak assignment "libdir ?=" to instead of "libdir =" will fix
the problem since the multilib builds are in different processes, and
they won't affect each other any more.

The sed command will match both $(prefix)/$(lib) and $(prefix)/lib since
the Makefile may has been modified before this patch.

(From OE-Core rev: c62d693e1341be4afcaaeb1ee37360ecac71f46a)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

pango / ptest: clean CFLAGS for host binary

The binary gen-all-unicode needs to be compiled for the host
architecture, the CFLAGS passed to target system could cause
build issues for it.

(From OE-Core rev: b797cfbe605ab250a5eb714a7d5175861690ae6e)

Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

scripts/create-recipe: minor fixes

Fixed:
- Remove PR. We don't need the "PR = r0" in the bb file.
- Function length can't get the array's size correctly.
  Should use function scalar.

(From OE-Core rev: efb9f9f1d9a85a22991f99277f77b87784762cbb)

Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_manager: Add rpm v4 support

Currently the package manager code only supports rpm v5. To be useful outside
of OE or with OE layers using v4, it makes sense to add in rpm v4 support. This
takes a patch from "Bartosh, Eduard" <eduard.bartosh@intel.com> and enhances
it to also include versions of the workarounds from poky-eurogiciel to
allow rpm v4 usage with the class for image construction.

(From OE-Core rev: fe21804c296bbb8b2b8b0c29e6e4890bc17f07fc)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_rpm: Add builddir macro to define source directory

This allows its usage in other RPM macros so files in ${S} can be found.

(From OE-Core rev: 649ddd4b17e8a1f94ca9f4bc3a71560437c61909)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_rpm: Add custom extension support for spec generation.

Add hooks to allow customisation of the rpm spec files. Since python functions
aren't visible in the data store, one variable is used to trigger the call to
a separately named function. A dummy function is not provided since this then
triggers various class ordering complexities which are best avoided.

Ultimately this will be replaced by a refactor of the code to generate the
spec file using a python class.

This allows the tizen layer to add hooks for the security manifests for
example.

(From OE-Core rev: 03ac91815013c0e85c4694b3ab849257e658aeba)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lz4: update to version 122

Makefile md5sum changed its is where they bump the version.

r122 fixes:
Fix : AIX & AIX64 support (SamG)
Fix : mips 64-bits support (lew van)
Added : Examples directory, using code examples from Takayuki Matsuoka
Updated : Framing specification, to v1.4.1
Updated : xxHash, to r36

r121 fixes:
Fix : make install for OS-X and BSD, thanks to Takayuki Matsuoka
Added : make install for kFreeBSD and Hurd (Nobuhiro Iwamatsu)
Fix : LZ4 HC streaming bug

(From OE-Core rev: 9dc1e2c5724b6eeda87edceac16d2e7107577f5a)

Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: process: Ensure abnormal exits set an error level

(Bitbake rev: 8f5c1cdae1ee6ce04ae0d04d0b95bd80efbf7534)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python-numpy: Fix build for mips64

Add missing mips64 specific config files

(From OE-Core rev: 4c0a9ccbad2889b27b4b1d2ab91215a4bdcca3ce)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

grub: Replace _BSD_SOURCE macro with _DEFAULT_SOURCE

This is needed with glibc 2.20 since _BSD_SOURCE
macro is gone

(From OE-Core rev: 12edeff6f23512ff88097f7ca4cf30ca3653d2eb)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xf86-video-intel/xf86-video-omapfb: Fix build with glibc 2.20

include xorg-xserver.h

(From OE-Core rev: 286c3e8c88b1afbb3090a4988692968e67f498cf)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xf86-input-synaptics/xf86-input-vmmouse: Fix build with glibc 2.20

Backport the upstream patches needed for them to work with glibc 2.20

(From OE-Core rev: 60f78480135aab55e538c9e4e0b6d387139f1404)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake.conf: Use 2.6.32 for oldest supported kernel

glibc 2.20+ wont support any older than that

(From OE-Core rev: 32b3a9ca554d9ff8f3b9c2ff62cc66ee865c61bf)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

recipes: Remove references to eglibc

change use of eglibc related variabled to glibc equivalents

(From OE-Core rev: fd15d6e0c8da75951a91d4467eda23c229b1026d)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

oeqa: sstatetests should now look for glibc-initial

(From OE-Core rev: ddc8e7394051c6a2a9cfdab6a9cd39699b7d61a7)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

image-swab.bbclass: Account for eglibc -> glibc move

(From OE-Core rev: 9942fe4b36e2a18510cb0805ddb7be71d72a75a2)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

conf: Account for eglibc->glibc move

Change references in documentation appropriately

(From OE-Core rev: bbd2eae187f9d6cadf03cbe8d84259593e3551ce)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

distro: TCLIBC now defines glibc instead of eglibc

Adjust naming conventions to reflect eglibc->glibc move

(From OE-Core rev: ce3f296ec9021d207cb80cb2c697932b83fd0e81)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

glibc: Migrate eglibc 2.19 -> glibc 2.20

- This is a big swoop change where we switch to using glibc
- option-groups are forward ported
- cross-localedef is extracted out from eglibc and hosted
  at github.com/kraj/localedef, its used for cross-localedef
  recipe
- Other non ported patches from eglibc are forward ported
  ppc8xx cache line workaround
  SH fpcr values
  dynamic resolver
  installing PIC archives is there but is not applied
  libc header bootstrap

- Delete eglibc recipes we moved back to using glibc now
- Fix ppc/e500 build

- Fix crypt module build when options are used
- Fix fnmatch build when options OPTION_EGLIBC_LOCALE_CODE is unset
  HAVE_MBSTATE_T and HAVE_MBSRTOWCS should be defined conditionally
  based upon OPTION_EGLIBC_LOCALE_CODE being set/unset
- Move the ports/ patches to relevant files now that ports is gone

(From OE-Core rev: 1027c535ea753e63d9ffe469a423e04467cf8940)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

perl: add explicit configs for Time-HiRes

The compilation of Time-HiRes tries to compile and run the testing
program but definitely fails since we are cross compiling:
Looking for clock_gettime()... ./tmp26733: ./tmp26733: cannot execute binary file
Looking for clock_getres()... ./tmp26733: ./tmp26733: cannot execute binary file

so add explicit configs to avoid the auto detecting.

(From OE-Core rev: 750b2a89af404dc7b275aa40fb693b07b9b297fe)

Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

ghostscript: Don't build-depend on libgcrypt for the local cups

Backported for the ghostscript supplied cups code from
http://www.cups.org/strfiles.php/3308/cups-no-gcrypt.patch

This addresses the cryto dependency seen during build.

(From OE-Core rev: f3e8914ea675217b3c86806522407ea19963d14f)

Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

native.bbclass: deltask package_qa

The native recipe doesn't need package_qa, and it has a race issue with
do_unpack which requires the clean dir of ${S}, then causes error:

NOTE: recipe opkg-utils-native-0.1.8+gitAUTOINC+eae0d8fa44-r0: task do_package_qa: Failed
ERROR: Task 283 (virtual:native:/path/to/opkg-utils_git.bb, do_package_qa) failed with exit code '1'

(From OE-Core rev: 6ad0979a6064755fd6d86b568bd3cbbcdd3d4e37)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto: ensure that recipe specific defaults take precedence

In order to make KBRANCH assignments more flexible and easy to override the
default in each recipe as changed to a conditional assignment. But the
common include file, sets its own branch default to master.

This results in the recipes not overriding KBRANCH and master always being
used.

By putting the include after the default assignment, we now get the proper
default branch.

(From OE-Core rev: ef48de6a4c1454c6f6e2de8636277b374ee44b50)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-yocto: replace --is-ancestor with basic git porcelain commands

--is-ancestor is a relatively new git option [commit 5907cda1, Aug 30 2012].
To support build machines with older versions of git installed, we can use
the basic porcelain commands to acheive the same check.

merge-base: "--is-ancestor A B" can be replaced with:

    if test "$(git rev-parse --verify A)" = "$(git merge-base A B)"

(From OE-Core rev: 2ddfffe52720d1df70b04131eac553776da7bc73)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.4: remove 3.4 name recipes

Removing the 3.4 recipes, since support has not shifted to 3.10 and
3.14 for LTSI kernel versions, with 3.16+ as the development version.

(From OE-Core rev: 362aaebbeb7b241edba00dd8ea08eab07596378c)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.14: update to v3.14.17

Updating the 3.14 repository to the latest korg stable udpate.

(From OE-Core rev: 1bb73c05ff0304d5626d977d2751107bb23de48c)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.14: vhost, vxland, openvswitch and block/bfq updates

Updating the linux-yocto/3.14 SRCREVs to integrate more feature additions
and backports to the LTSI kernel base:

   42477caf6bfd block, bfq: add Early Queue Merge (EQM) to BFQ-v7r5 for 3.14.0
   349aa3f0848d block: introduce the BFQ-v7r5 I/O sched for 3.14
   121ed2738c47 block: cgroups, kconfig, build bits for BFQ-v7r5-3.14
   9925795a3e54 vhost-scsi: Include prot_bytes into expected data transfer length
   68fe340cb836 vhost: move memory pointer to VQs
   72fa27bcf526 vhost: move acked_features to VQs
   757680234478 vhost: replace rcu with mutex
   050c1440ac73 vhost-net: extend device allocation to vmalloc
   d68641313156 vhost/scsi: Enable T10 PI IOV -> SGL memory mapping
   fb89a8df7f1c vhost/scsi: Add T10 PI IOV -> SGL memory mapping logic
   5caf8475ee8a vhost/scsi: Add preallocation of protection SGLs
   c0785b9490a8 vhost/scsi: Move sanity check into vhost_scsi_map_iov_to_sgl
   bd947327cdf6 vhost: don't open-code sockfd_put()
   83fab2df94c6 openvswitch: Use exact lookup for flow_get and flow_del.
   9c185c40f7a8 openvswitch: Fix tracking of flags seen in TCP flows.
   0d2455332847 openvswitch: supply a dummy err_handler of gre_cisco_protocol to prevent kernel crash
   4513a2fd2703 openvswitch: Fix a double free bug for the sample action
   1acf10deff18 openvswitch: Simplify genetlink code.
   9ea6a4dea3f5 openvswitch: Minimize ovs_flow_cmd_new|set critical sections.
   9e76764432cf openvswitch: Split ovs_flow_cmd_new_or_set().
   7bafcd59a838 openvswitch: Minimize ovs_flow_cmd_del critical section.
   67980f929444 openvswitch: Reduce locking requirements.
   347f9442b559 openvswitch: Fix ovs_flow_stats_get/clear RCU dereference.
   c7aa7c522ec0 openvswitch: Fix typo.
   b244c7b19a55 openvswitch: Minimize dp and vport critical sections.
   21883a3ffdb6 openvswitch: Make flow mask removal symmetric.
   ffa173197cf5 openvswitch: Build flow cmd netlink reply only if needed.
   f3e8e5c07505 openvswitch: Clarify locking.
   df42a8f505c2 openvswitch: Avoid assigning a NULL pointer to flow actions.
   91b07542da22 openvswitch: Compact sw_flow_key.
   24bb1a576332 net/openvswitch: Use with RCU_INIT_POINTER(x, NULL) in vport-gre.c
   808868318939 openvswitch: Use TCP flags in the flow key for stats.
   a57851bae1cf openvswitch: Fix output of SCTP mask.
   8b70125106ee openvswitch: Per NUMA node flow stats.
   606497442f52 openvswitch: Remove 5-tuple optimization.
   01e74b175909 openvswitch: Use ether_addr_copy
   b5d02cfdc985 openvswitch: flow_netlink: Use pr_fmt to OVS_NLERR output
   4da9e8d176f9 openvswitch: Use net_ratelimit in OVS_NLERR
   ee8f673dd798 openvswitch: Added (unsigned long long) cast in printf
   b67f35f8b0aa openvswitch: avoid cast-qual warning in vport_priv
   3e01428f6e0c openvswitch: avoid warnings in vport_from_priv
   069ee359a487 openvswitch: use const in some local vars and casts
   cbec86356a89 vxlan: add x-netns support
   a51970560923 vxlan: ensure to advertise the right fdb remote
   696068dca072 vxlan: remove unused port variable in vxlan_udp_encap_recv()
   e94003f3b58d sched/deadline: Fix sched_yield() behavior

(From OE-Core rev: b05729f22dbda6257a9469313a401c5ed3211ada)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kern-tools: allow meta branch and meta data directory to differ

From the kern-tools commit:

    tools: allow meta directories that are not the same as the branch name

    With this change it is now possible to have a meta branch with meta data
    in a directory that is not the same name as the branch.

    The changes to three parts of the build are required to discover the name
    of the meta directory by relying on the fact that in a clean/proper build
    the meta directory is the only untracked, top level directory in the build.

    As such, we can restore a checkpoint and then examine the build directory
    to determine the meta directory name .. avoiding any new variables to
    indicate this to the scripts and build system.

(From OE-Core rev: 36823f7aff5c8e28900997c96a97c302947981b0)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-yocto: convert echo statements to bb* equivalents

Use the bbinfo, bberror, bbfatal equivalents to the existing echo statements
within the kernel-yocto processing. This makes us consistent with the other
messages from the build system.

(From OE-Core rev: 1686d69de08bcecd39942802df18c4f0ca029ffe)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-yocto: remove KBRANCH_DEFAULT

KBRANCH_DEFAULT is no longer used, so we can remove it from all
recipes (and it won't be missed).

(From OE-Core rev: e631fc989b08873f559c5927117301294f04298c)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-yocto: allow custom non-meta, SRCREV format builds

When custom respositories are built (like a pure kernel.org
repo), the machine_meta SRCREV format is not applicable. As
such, we shouldn't check for the meta branch and we shouldn't
only check SRCREV_machine based revisions.

(From OE-Core rev: bf555ee3305114483aa5083cde1accd23b46a39e)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-yocto: clean overly complex branch checkout

Since the git fetcher ensures that branches exist, we no longer need to
validate the branch and have a conditional checkout of the source.

We can remove some checks and ensure that whenever we exit the
do_kernel_checkout routine that a branch is always checked out.

(From OE-Core rev: 2ffa3f8be6996877cd552ff22260de35c19c413d)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-yocto: use show-ref instead of branch -a

It's better to check a branches existence via show-ref versus the end
user branch commands. So we make the switch.

Also as part of this change, we move the conversion of remote branches
to local branches above the meta branch checking. This is required to
ensure that the branch is local for the show-ref check.

(From OE-Core rev: 04bd4cee625574cfa67679b6b2a150a21106c5bf)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-yocto: simplify branch SRCREV validation

The checking of machine and meta branch SRCREVs was inconsistent and
didn't allow a mixed AUTOREV machine/meta branch combination. By
simplifying the checks and changing the logic, we can now allow this
combination.

(From OE-Core rev: e272cfbba87a98393d6c22bd96c7f1cb6902170a)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-yocto: remove KBRANCH_DEFAULT

KBRANCH_DEFAULT was introduced as a way to trigger the enforced build
of a particular branch of the tree. With the fetcher now enforcing
SRCREVs existing on a branch, we can simply validate that the SRCREV
is reachable from the final branch and no longer care about enforcing
a given branch.

(From OE-Core rev: fbacbb0ca79cdae33803fdd3158671488b9bbcbe)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-yocto: remove branch existence checking in do_validate_branches

Now that the fetcher will enforce branch existence, we no longer need to
confirm that a branch exists, and that it was the branch requested to
be built.

We know the branch exists and we'll confirm that the specified SRCREV
is going to be built after we've patched the tree.

(From OE-Core rev: 93a7c7bd8e860e621af7174ef10d571b0d8622b2)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-yocto: remove SRC_URI kbranch validation

We no longer need to check if the KBRANCH matches the branch specified
in the SRC_URI. This is taken care of by the fetcher at the beginning
and SRCREV ancestor validation after patching.

(From OE-Core rev: a9b6550d3e2f5bf21fd05a17bca3e57c5b74e057)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>