Ben Hutchings [Tue, 3 May 2011 07:49:25 +0000 (07:49 +0000)]
ipheth: Properly distinguish length and alignment in URBs and skbs
The USB protocol this driver implements appears to require 2 bytes of
padding in front of each received packet. This used to be equal to
the value of NET_IP_ALIGN on x86, so the driver abused that constant
and mostly worked, but this is no longer the case. The driver also
mixed up the URB and packet lengths, resulting in 2 bytes of junk at
the end of the skb.
Introduce a private constant for the 2 bytes of padding; fix this
confusion and check for the under-length case.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roland Dreier [Fri, 6 May 2011 08:32:53 +0000 (08:32 +0000)]
vmxnet3: Consistently disable irqs when taking adapter->cmd_lock
Using the vmxnet3 driver produces a lockdep warning because
vmxnet3_set_mc(), which is called with mc->mca_lock held, takes
adapter->cmd_lock. However, there are a couple of places where
adapter->cmd_lock is taken with softirqs enabled, lockdep warns that a
softirq that tries to take mc->mca_lock could happen while
adapter->cmd_lock is held, leading to an AB-BA deadlock.
I'm not sure if this is a real potential deadlock or not, but the
simplest and best fix seems to be simply to make sure we take cmd_lock
with spin_lock_irqsave() everywhere -- the places with plain spin_lock
just look like oversights.
The full enormous lockdep warning is:
=========================================================
[ INFO: possible irq lock inversion dependency detected ]
2.6.39-rc6+ #1
---------------------------------------------------------
ifconfig/567 just changed the state of lock:
(&(&mc->mca_lock)->rlock){+.-...}, at: [<
ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
but this lock took another, SOFTIRQ-unsafe lock in the past:
(&(&adapter->cmd_lock)->rlock){+.+...}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
4 locks held by ifconfig/567:
#0: (rtnl_mutex){+.+.+.}, at: [<
ffffffff8147d547>] rtnl_lock+0x17/0x20
#1: ((inetaddr_chain).rwsem){.+.+.+}, at: [<
ffffffff810896cf>] __blocking_notifier_call_chain+0x5f/0xb0
#2: (&idev->mc_ifc_timer){+.-...}, at: [<
ffffffff8106f21b>] run_timer_softirq+0xeb/0x3f0
#3: (&ndev->lock){++.-..}, at: [<
ffffffff81531dd2>] mld_ifc_timer_expire+0x32/0x280
the shortest dependencies between 2nd lock and 1st lock:
-> (&(&adapter->cmd_lock)->rlock){+.+...} ops: 11 {
HARDIRQ-ON-W at:
[<
ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
[<
ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<
ffffffff81571156>] _raw_spin_lock+0x36/0x70
[<
ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
[<
ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
[<
ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<
ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<
ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<
ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<
ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<
ffffffff81373a2e>] driver_attach+0x1e/0x20
[<
ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<
ffffffff813745b6>] driver_register+0x76/0x140
[<
ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<
ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<
ffffffff81002165>] do_one_initcall+0x45/0x190
[<
ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<
ffffffff8157a142>] system_call_fastpath+0x16/0x1b
SOFTIRQ-ON-W at:
[<
ffffffff8109adb7>] __lock_acquire+0x827/0x1e10
[<
ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<
ffffffff81571156>] _raw_spin_lock+0x36/0x70
[<
ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
[<
ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
[<
ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<
ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<
ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<
ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<
ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<
ffffffff81373a2e>] driver_attach+0x1e/0x20
[<
ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<
ffffffff813745b6>] driver_register+0x76/0x140
[<
ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<
ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<
ffffffff81002165>] do_one_initcall+0x45/0x190
[<
ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<
ffffffff8157a142>] system_call_fastpath+0x16/0x1b
INITIAL USE at:
[<
ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
[<
ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<
ffffffff81571156>] _raw_spin_lock+0x36/0x70
[<
ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
[<
ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
[<
ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<
ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<
ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<
ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<
ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<
ffffffff81373a2e>] driver_attach+0x1e/0x20
[<
ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<
ffffffff813745b6>] driver_register+0x76/0x140
[<
ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<
ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<
ffffffff81002165>] do_one_initcall+0x45/0x190
[<
ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<
ffffffff8157a142>] system_call_fastpath+0x16/0x1b
}
... key at: [<
ffffffffa0017590>] __key.42516+0x0/0xffffffffffffda70 [vmxnet3]
... acquired at:
[<
ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<
ffffffff81571bb5>] _raw_spin_lock_irqsave+0x55/0xa0
[<
ffffffffa000de27>] vmxnet3_set_mc+0x97/0x1a0 [vmxnet3]
[<
ffffffff8146ffa0>] __dev_set_rx_mode+0x40/0xb0
[<
ffffffff81470040>] dev_set_rx_mode+0x30/0x50
[<
ffffffff81470127>] __dev_open+0xc7/0x100
[<
ffffffff814703c1>] __dev_change_flags+0xa1/0x180
[<
ffffffff81470568>] dev_change_flags+0x28/0x70
[<
ffffffff814da960>] devinet_ioctl+0x730/0x800
[<
ffffffff814db508>] inet_ioctl+0x88/0xa0
[<
ffffffff814541f0>] sock_do_ioctl+0x30/0x70
[<
ffffffff814542a9>] sock_ioctl+0x79/0x2f0
[<
ffffffff81188798>] do_vfs_ioctl+0x98/0x570
[<
ffffffff81188d01>] sys_ioctl+0x91/0xa0
[<
ffffffff8157a142>] system_call_fastpath+0x16/0x1b
-> (_xmit_ETHER){+.....} ops: 6 {
HARDIRQ-ON-W at:
[<
ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
[<
ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<
ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<
ffffffff81475618>] __dev_mc_add+0x38/0x90
[<
ffffffff814756a0>] dev_mc_add+0x10/0x20
[<
ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
[<
ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<
ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<
ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
[<
ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<
ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
[<
ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
[<
ffffffff8146a944>] register_netdevice+0x244/0x2d0
[<
ffffffff8146aa0f>] register_netdev+0x3f/0x60
[<
ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
[<
ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<
ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<
ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<
ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<
ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<
ffffffff81373a2e>] driver_attach+0x1e/0x20
[<
ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<
ffffffff813745b6>] driver_register+0x76/0x140
[<
ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<
ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<
ffffffff81002165>] do_one_initcall+0x45/0x190
[<
ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<
ffffffff8157a142>] system_call_fastpath+0x16/0x1b
INITIAL USE at:
[<
ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
[<
ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<
ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<
ffffffff81475618>] __dev_mc_add+0x38/0x90
[<
ffffffff814756a0>] dev_mc_add+0x10/0x20
[<
ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
[<
ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<
ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<
ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
[<
ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<
ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
[<
ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
[<
ffffffff8146a944>] register_netdevice+0x244/0x2d0
[<
ffffffff8146aa0f>] register_netdev+0x3f/0x60
[<
ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
[<
ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<
ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<
ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<
ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<
ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<
ffffffff81373a2e>] driver_attach+0x1e/0x20
[<
ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<
ffffffff813745b6>] driver_register+0x76/0x140
[<
ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<
ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<
ffffffff81002165>] do_one_initcall+0x45/0x190
[<
ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<
ffffffff8157a142>] system_call_fastpath+0x16/0x1b
}
... key at: [<
ffffffff827fd868>] netdev_addr_lock_key+0x8/0x1e0
... acquired at:
[<
ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<
ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<
ffffffff81475618>] __dev_mc_add+0x38/0x90
[<
ffffffff814756a0>] dev_mc_add+0x10/0x20
[<
ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
[<
ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<
ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<
ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
[<
ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<
ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
[<
ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
[<
ffffffff8146a944>] register_netdevice+0x244/0x2d0
[<
ffffffff8146aa0f>] register_netdev+0x3f/0x60
[<
ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
[<
ffffffff812df67f>] local_pci_probe+0x5f/0xd0
[<
ffffffff812dfde9>] pci_device_probe+0x119/0x120
[<
ffffffff81373df6>] driver_probe_device+0x96/0x1c0
[<
ffffffff81373fcb>] __driver_attach+0xab/0xb0
[<
ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
[<
ffffffff81373a2e>] driver_attach+0x1e/0x20
[<
ffffffff813735b8>] bus_add_driver+0xc8/0x290
[<
ffffffff813745b6>] driver_register+0x76/0x140
[<
ffffffff812e0046>] __pci_register_driver+0x66/0xe0
[<
ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
[<
ffffffff81002165>] do_one_initcall+0x45/0x190
[<
ffffffff810aa76b>] sys_init_module+0xfb/0x250
[<
ffffffff8157a142>] system_call_fastpath+0x16/0x1b
-> (&(&mc->mca_lock)->rlock){+.-...} ops: 6 {
HARDIRQ-ON-W at:
[<
ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
[<
ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<
ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<
ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0
[<
ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<
ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<
ffffffff81ce0d16>] addrconf_init+0x4e/0x183
[<
ffffffff81ce0ba1>] inet6_init+0x191/0x2a6
[<
ffffffff81002165>] do_one_initcall+0x45/0x190
[<
ffffffff81ca4d3f>] kernel_init+0xe3/0x168
[<
ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10
IN-SOFTIRQ-W at:
[<
ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
[<
ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<
ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<
ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
[<
ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
[<
ffffffff810666d0>] __do_softirq+0xc0/0x210
[<
ffffffff8157b3dc>] call_softirq+0x1c/0x30
[<
ffffffff8100d42d>] do_softirq+0xad/0xe0
[<
ffffffff81066afe>] irq_exit+0x9e/0xb0
[<
ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
[<
ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
[<
ffffffff8149d857>] rt_do_flush+0x87/0x2a0
[<
ffffffff814a16b6>] rt_cache_flush+0x46/0x60
[<
ffffffff814e36e0>] fib_disable_ip+0x40/0x60
[<
ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
[<
ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<
ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
[<
ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
[<
ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
[<
ffffffff814d8223>] inet_del_ifa+0x13/0x20
[<
ffffffff814da731>] devinet_ioctl+0x501/0x800
[<
ffffffff814db508>] inet_ioctl+0x88/0xa0
[<
ffffffff814541f0>] sock_do_ioctl+0x30/0x70
[<
ffffffff814542a9>] sock_ioctl+0x79/0x2f0
[<
ffffffff81188798>] do_vfs_ioctl+0x98/0x570
[<
ffffffff81188d01>] sys_ioctl+0x91/0xa0
[<
ffffffff8157a142>] system_call_fastpath+0x16/0x1b
INITIAL USE at:
[<
ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
[<
ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<
ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<
ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0
[<
ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
[<
ffffffff81515e17>] ipv6_add_dev+0x357/0x450
[<
ffffffff81ce0d16>] addrconf_init+0x4e/0x183
[<
ffffffff81ce0ba1>] inet6_init+0x191/0x2a6
[<
ffffffff81002165>] do_one_initcall+0x45/0x190
[<
ffffffff81ca4d3f>] kernel_init+0xe3/0x168
[<
ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10
}
... key at: [<
ffffffff82801be2>] __key.40877+0x0/0x8
... acquired at:
[<
ffffffff810997bc>] check_usage_forwards+0x9c/0x110
[<
ffffffff8109a32c>] mark_lock+0x19c/0x400
[<
ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
[<
ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<
ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<
ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
[<
ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
[<
ffffffff810666d0>] __do_softirq+0xc0/0x210
[<
ffffffff8157b3dc>] call_softirq+0x1c/0x30
[<
ffffffff8100d42d>] do_softirq+0xad/0xe0
[<
ffffffff81066afe>] irq_exit+0x9e/0xb0
[<
ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
[<
ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
[<
ffffffff8149d857>] rt_do_flush+0x87/0x2a0
[<
ffffffff814a16b6>] rt_cache_flush+0x46/0x60
[<
ffffffff814e36e0>] fib_disable_ip+0x40/0x60
[<
ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
[<
ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<
ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
[<
ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
[<
ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
[<
ffffffff814d8223>] inet_del_ifa+0x13/0x20
[<
ffffffff814da731>] devinet_ioctl+0x501/0x800
[<
ffffffff814db508>] inet_ioctl+0x88/0xa0
[<
ffffffff814541f0>] sock_do_ioctl+0x30/0x70
[<
ffffffff814542a9>] sock_ioctl+0x79/0x2f0
[<
ffffffff81188798>] do_vfs_ioctl+0x98/0x570
[<
ffffffff81188d01>] sys_ioctl+0x91/0xa0
[<
ffffffff8157a142>] system_call_fastpath+0x16/0x1b
stack backtrace:
Pid: 567, comm: ifconfig Not tainted 2.6.39-rc6+ #1
Call Trace:
<IRQ> [<
ffffffff810996f6>] print_irq_inversion_bug+0x146/0x170
[<
ffffffff81099720>] ? print_irq_inversion_bug+0x170/0x170
[<
ffffffff810997bc>] check_usage_forwards+0x9c/0x110
[<
ffffffff8109a32c>] mark_lock+0x19c/0x400
[<
ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
[<
ffffffff8109a383>] ? mark_lock+0x1f3/0x400
[<
ffffffff8109b497>] ? __lock_acquire+0xf07/0x1e10
[<
ffffffff81012255>] ? native_sched_clock+0x15/0x70
[<
ffffffff8109ca4d>] lock_acquire+0x9d/0x130
[<
ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280
[<
ffffffff8109759d>] ? lock_release_holdtime+0x3d/0x1a0
[<
ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
[<
ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280
[<
ffffffff8157170b>] ? _raw_spin_unlock+0x2b/0x40
[<
ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
[<
ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
[<
ffffffff8106f21b>] ? run_timer_softirq+0xeb/0x3f0
[<
ffffffff810122b9>] ? sched_clock+0x9/0x10
[<
ffffffff81531da0>] ? mld_gq_timer_expire+0x30/0x30
[<
ffffffff810666d0>] __do_softirq+0xc0/0x210
[<
ffffffff8109455f>] ? tick_program_event+0x1f/0x30
[<
ffffffff8157b3dc>] call_softirq+0x1c/0x30
[<
ffffffff8100d42d>] do_softirq+0xad/0xe0
[<
ffffffff81066afe>] irq_exit+0x9e/0xb0
[<
ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
[<
ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
<EOI> [<
ffffffff81571f14>] ? retint_restore_args+0x13/0x13
[<
ffffffff810974a7>] ? lock_is_held+0x17/0xd0
[<
ffffffff8149d857>] rt_do_flush+0x87/0x2a0
[<
ffffffff814a16b6>] rt_cache_flush+0x46/0x60
[<
ffffffff814e36e0>] fib_disable_ip+0x40/0x60
[<
ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
[<
ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
[<
ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
[<
ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
[<
ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
[<
ffffffff814d8223>] inet_del_ifa+0x13/0x20
[<
ffffffff814da731>] devinet_ioctl+0x501/0x800
[<
ffffffff8108a3af>] ? local_clock+0x6f/0x80
[<
ffffffff81575898>] ? do_page_fault+0x268/0x560
[<
ffffffff814db508>] inet_ioctl+0x88/0xa0
[<
ffffffff814541f0>] sock_do_ioctl+0x30/0x70
[<
ffffffff814542a9>] sock_ioctl+0x79/0x2f0
[<
ffffffff810dfe87>] ? __call_rcu+0xa7/0x190
[<
ffffffff81188798>] do_vfs_ioctl+0x98/0x570
[<
ffffffff8117737e>] ? fget_light+0x33e/0x430
[<
ffffffff81571ef9>] ? retint_swapgs+0x13/0x1b
[<
ffffffff81188d01>] sys_ioctl+0x91/0xa0
[<
ffffffff8157a142>] system_call_fastpath+0x16/0x1b
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Rosenberg [Fri, 6 May 2011 03:27:18 +0000 (03:27 +0000)]
dccp: handle invalid feature options length
A length of zero (after subtracting two for the type and len fields) for
the DCCPO_{CHANGE,CONFIRM}_{L,R} options will cause an underflow due to
the subtraction. The subsequent code may read past the end of the
options value buffer when parsing. I'm unsure of what the consequences
of this might be, but it's probably not good.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kurt Van Dijck [Mon, 2 May 2011 04:50:48 +0000 (04:50 +0000)]
can: fix SJA1000 dlc for RTR packets
RTR frames do have a valid data length code on CAN.
The driver for SJA1000 did not handle that situation properly.
Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ming Lei [Thu, 28 Apr 2011 22:37:09 +0000 (22:37 +0000)]
usbnet: runtime pm: fix out of memory
This patch makes use of the EVENT_DEV_OPEN flag introduced recently to
fix one out of memory issue, which can be reproduced on omap3/4 based
pandaboard/beagle XM easily with steps below:
- enable runtime pm
echo auto > /sys/devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-1/1-1.1/power/control
- ifconfig eth0 up
- then out of memroy happened, see [1] for kernel message.
Follows my analysis:
- 'ifconfig eth0 up' brings eth0 out of suspend, and usbnet_resume
is called to schedule dev->bh, then rx urbs are submited to prepare for
recieving data;
- some usbnet devices will produce garbage rx packets flood if
info->reset is not called in usbnet_open.
- so there is no enough chances for usbnet_bh to handle and release
recieved skb buffers since many rx interrupts consumes cpu, so out of memory
for atomic allocation in rx_submit happened.
This patch fixes the issue by simply not allowing schedule of usbnet_bh until device
is opened.
[1], dmesg
[ 234.712005] smsc95xx 1-1.1:1.0: rpm_resume flags 0x4
[ 234.712066] usb 1-1.1: rpm_resume flags 0x0
[ 234.712066] usb 1-1: rpm_resume flags 0x0
[ 234.712097] usb usb1: rpm_resume flags 0x0
[ 234.712127] usb usb1: usb auto-resume
[ 234.712158] ehci-omap ehci-omap.0: resume root hub
[ 234.754028] hub 1-0:1.0: hub_resume
[ 234.754821] hub 1-0:1.0: port 1: status 0507 change 0000
[ 234.756011] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 234.756042] hub 1-0:1.0: rpm_resume flags 0x4
[ 234.756072] usb usb1: rpm_resume flags 0x0
[ 234.756164] usb usb1: rpm_resume returns 1
[ 234.756195] hub 1-0:1.0: rpm_resume returns 0
[ 234.756195] hub 1-0:1.0: rpm_suspend flags 0x4
[ 234.756225] hub 1-0:1.0: rpm_suspend returns 0
[ 234.756256] usb usb1: rpm_resume returns 0
[ 234.757141] usb 1-1: usb auto-resume
[ 234.793151] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 234.816558] usb 1-1: finish resume
[ 234.817871] hub 1-1:1.0: hub_resume
[ 234.818420] hub 1-1:1.0: port 1: status 0507 change 0000
[ 234.820495] ehci-omap ehci-omap.0: reused qh
eec50220 schedule
[ 234.820495] usb 1-1: link qh256-0001/
eec50220 start 1 [1/0 us]
[ 234.820587] usb 1-1: rpm_resume returns 0
[ 234.820800] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0000
[ 234.820800] hub 1-1:1.0: rpm_resume flags 0x4
[ 234.820831] hub 1-1:1.0: rpm_resume returns 0
[ 234.820861] hub 1-1:1.0: rpm_suspend flags 0x4
[ 234.820861] hub 1-1:1.0: rpm_suspend returns 0
[ 234.821777] usb 1-1.1: usb auto-resume
[ 234.868591] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002
[ 234.868591] hub 1-1:1.0: rpm_resume flags 0x4
[ 234.868621] hub 1-1:1.0: rpm_resume returns 0
[ 234.868652] hub 1-1:1.0: rpm_suspend flags 0x4
[ 234.868652] hub 1-1:1.0: rpm_suspend returns 0
[ 234.879486] usb 1-1.1: finish resume
[ 234.880279] usb 1-1.1: rpm_resume returns 0
[ 234.880310] smsc95xx 1-1.1:1.0: rpm_resume returns 0
[ 238.880187] ksoftirqd/0: page allocation failure. order:0, mode:0x20
[ 238.880218] Backtrace:
[ 238.880249] [<
c01b9800>] (dump_backtrace+0x0/0xf8) from [<
c065e1dc>] (dump_stack+0x18/0x1c)
[ 238.880249] r6:
00000000 r5:
00000000 r4:
00000020 r3:
00000002
[ 238.880310] [<
c065e1c4>] (dump_stack+0x0/0x1c) from [<
c026ece4>] (__alloc_pages_nodemask+0x620/0x724)
[ 238.880340] [<
c026e6c4>] (__alloc_pages_nodemask+0x0/0x724) from [<
c02986d4>] (kmem_getpages.clone.34+0x34/0xc8)
[ 238.880371] [<
c02986a0>] (kmem_getpages.clone.34+0x0/0xc8) from [<
c02988f8>] (cache_grow.clone.42+0x84/0x154)
[ 238.880371] r6:
ef871aa4 r5:
ef871a80 r4:
ef81fd40 r3:
00000020
[ 238.880401] [<
c0298874>] (cache_grow.clone.42+0x0/0x154) from [<
c0298b64>] (cache_alloc_refill+0x19c/0x1f0)
[ 238.880432] [<
c02989c8>] (cache_alloc_refill+0x0/0x1f0) from [<
c0299804>] (kmem_cache_alloc+0x90/0x190)
[ 238.880462] [<
c0299774>] (kmem_cache_alloc+0x0/0x190) from [<
c052e260>] (__alloc_skb+0x34/0xe8)
[ 238.880493] [<
c052e22c>] (__alloc_skb+0x0/0xe8) from [<
bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet])
[ 238.880523] [<
bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<
bf050d38>] (rx_complete+0x19c/0x1b0 [usbnet])
[ 238.880737] [<
bf050b9c>] (rx_complete+0x0/0x1b0 [usbnet]) from [<
bf006fd0>] (usb_hcd_giveback_urb+0xa8/0xf4 [usbcore])
[ 238.880737] r8:
eeeced34 r7:
eeecec00 r6:
eeecec00 r5:
00000000 r4:
eec2dd20
[ 238.880767] r3:
bf050b9c
[ 238.880859] [<
bf006f28>] (usb_hcd_giveback_urb+0x0/0xf4 [usbcore]) from [<
bf03c8f8>] (ehci_urb_done+0xb0/0xbc [ehci_hcd])
[ 238.880859] r6:
00000000 r5:
eec2dd20 r4:
eeeced44 r3:
eec2dd34
[ 238.880920] [<
bf03c848>] (ehci_urb_done+0x0/0xbc [ehci_hcd]) from [<
bf040204>] (qh_completions+0x308/0x3bc [ehci_hcd])
[ 238.880920] r7:
00000000 r6:
eeda21a0 r5:
ffdfe3c0 r4:
eeda21ac
[ 238.880981] [<
bf03fefc>] (qh_completions+0x0/0x3bc [ehci_hcd]) from [<
bf040ef8>] (scan_async+0xb0/0x16c [ehci_hcd])
[ 238.881011] [<
bf040e48>] (scan_async+0x0/0x16c [ehci_hcd]) from [<
bf040fec>] (ehci_work+0x38/0x90 [ehci_hcd])
[ 238.881042] [<
bf040fb4>] (ehci_work+0x0/0x90 [ehci_hcd]) from [<
bf042940>] (ehci_irq+0x300/0x34c [ehci_hcd])
[ 238.881072] r4:
eeeced34 r3:
00000001
[ 238.881134] [<
bf042640>] (ehci_irq+0x0/0x34c [ehci_hcd]) from [<
bf006828>] (usb_hcd_irq+0x40/0xac [usbcore])
[ 238.881195] [<
bf0067e8>] (usb_hcd_irq+0x0/0xac [usbcore]) from [<
c0239764>] (handle_irq_event_percpu+0xb8/0x240)
[ 238.881225] r6:
eec504e0 r5:
0000006d r4:
eec504e0 r3:
bf0067e8
[ 238.881256] [<
c02396ac>] (handle_irq_event_percpu+0x0/0x240) from [<
c0239930>] (handle_irq_event+0x44/0x64)
[ 238.881256] [<
c02398ec>] (handle_irq_event+0x0/0x64) from [<
c023bbd0>] (handle_level_irq+0xe0/0x114)
[ 238.881286] r6:
0000006d r5:
c080c14c r4:
c080c100 r3:
00020000
[ 238.881317] [<
c023baf0>] (handle_level_irq+0x0/0x114) from [<
c01ab090>] (asm_do_IRQ+0x90/0xd0)
[ 238.881317] r5:
00000000 r4:
0000006d
[ 238.881347] [<
c01ab000>] (asm_do_IRQ+0x0/0xd0) from [<
c06624d0>] (__irq_svc+0x50/0x134)
[ 238.881378] Exception stack(0xef837e20 to 0xef837e68)
[ 238.881378] 7e20:
00000001 00185610 016cc000 c00490c0 eb380000 ef800540 00000020 00004ae0
[ 238.881408] 7e40:
00000020 bf0509f4 60000013 ef837e9c ef837e40 ef837e68 c0226f0c c0298ca0
[ 238.881408] 7e60:
20000013 ffffffff
[ 238.881408] r5:
fa240100 r4:
ffffffff
[ 238.881439] [<
c0298bb8>] (__kmalloc_track_caller+0x0/0x1d0) from [<
c052e284>] (__alloc_skb+0x58/0xe8)
[ 238.881469] [<
c052e22c>] (__alloc_skb+0x0/0xe8) from [<
bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet])
[ 238.881500] [<
bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<
bf0513d8>] (usbnet_bh+0x1b4/0x250 [usbnet])
[ 238.881530] [<
bf051224>] (usbnet_bh+0x0/0x250 [usbnet]) from [<
c01f912c>] (tasklet_action+0xb0/0x1f8)
[ 238.881530] r6:
00000000 r5:
ef9757f0 r4:
ef9757ec r3:
bf051224
[ 238.881561] [<
c01f907c>] (tasklet_action+0x0/0x1f8) from [<
c01f97ac>] (__do_softirq+0x140/0x290)
[ 238.881561] r8:
00000006 r7:
00000101 r6:
00000000 r5:
c0806098 r4:
00000001
[ 238.881591] r3:
c01f907c
[ 238.881622] [<
c01f966c>] (__do_softirq+0x0/0x290) from [<
c01f99cc>] (run_ksoftirqd+0xd0/0x1f4)
[ 238.881622] [<
c01f98fc>] (run_ksoftirqd+0x0/0x1f4) from [<
c02113b0>] (kthread+0x90/0x98)
[ 238.881652] r7:
00000013 r6:
c01f98fc r5:
00000000 r4:
ef831efc
[ 238.881683] [<
c0211320>] (kthread+0x0/0x98) from [<
c01f62f4>] (do_exit+0x0/0x374)
[ 238.881713] r6:
c01f62f4 r5:
c0211320 r4:
ef831efc
[ 238.881713] Mem-info:
[ 238.881744] Normal per-cpu:
[ 238.881744] CPU 0: hi: 186, btch: 31 usd: 38
[ 238.881744] CPU 1: hi: 186, btch: 31 usd: 169
[ 238.881774] HighMem per-cpu:
[ 238.881774] CPU 0: hi: 90, btch: 15 usd: 66
[ 238.881774] CPU 1: hi: 90, btch: 15 usd: 86
[ 238.881805] active_anon:544 inactive_anon:71 isolated_anon:0
[ 238.881805] active_file:926 inactive_file:2538 isolated_file:0
[ 238.881805] unevictable:0 dirty:10 writeback:0 unstable:0
[ 238.881805] free:57782 slab_reclaimable:864 slab_unreclaimable:186898
[ 238.881805] mapped:632 shmem:144 pagetables:50 bounce:0
[ 238.881835] Normal free:1328kB min:3532kB low:4412kB high:5296kB active_anon:0kB inactive_anon:0kB active_file:880kB inactive_file:848kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:780288kB mlocked:0kB dirty:36kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:3456kB slab_unreclaimable:747592kB kernel_stack:392kB pagetables:200kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[ 238.881866] lowmem_reserve[]: 0 1904 1904
[ 238.881896] HighMem free:229800kB min:236kB low:508kB high:784kB active_anon:2176kB inactive_anon:284kB active_file:2824kB inactive_file:9304kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:243712kB mlocked:0kB dirty:4kB writeback:0kB mapped:2528kB shmem:576kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[ 238.881927] lowmem_reserve[]: 0 0 0
[ 238.881958] Normal: 0*4kB 4*8kB 6*16kB 0*32kB 1*64kB 1*128kB 0*256kB 2*512kB 0*1024kB 0*2048kB 0*4096kB = 1344kB
[ 238.882019] HighMem: 6*4kB 2*8kB 4*16kB 4*32kB 1*64kB 1*128kB 0*256kB 2*512kB 3*1024kB 0*2048kB 55*4096kB = 229800kB
[ 238.882080] 3610 total pagecache pages
[ 238.882080] 0 pages in swap cache
[ 238.882080] Swap cache stats: add 0, delete 0, find 0/0
[ 238.882110] Free swap = 0kB
[ 238.882110] Total swap = 0kB
[ 238.933776] 262144 pages of RAM
[ 238.933776] 58240 free pages
[ 238.933776] 10503 reserved pages
[ 238.933776] 187773 slab pages
[ 238.933807] 2475 pages shared
[ 238.933807] 0 pages swap cached
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 4 May 2011 10:02:26 +0000 (10:02 +0000)]
net: ip_expire() must revalidate route
Commit
4a94445c9a5c (net: Use ip_route_input_noref() in input path)
added a bug in IP defragmentation handling, in case timeout is fired.
When a frame is defragmented, we use last skb dst field when building
final skb. Its dst is valid, since we are in rcu read section.
But if a timeout occurs, we take first queued fragment to build one ICMP
TIME EXCEEDED message. Problem is all queued skb have weak dst pointers,
since we escaped RCU critical section after their queueing. icmp_send()
might dereference a now freed (and possibly reused) part of memory.
Calling skb_dst_drop() and ip_route_input_noref() to revalidate route is
the only possible choice.
Reported-by: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lucian Adrian Grijincu [Sun, 1 May 2011 01:44:01 +0000 (01:44 +0000)]
sysctl: net: call unregister_net_sysctl_table where needed
ctl_table_headers registered with register_net_sysctl_table should
have been unregistered with the equivalent unregister_net_sysctl_table
Signed-off-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sat, 30 Apr 2011 01:28:17 +0000 (01:28 +0000)]
Revert: veth: remove unneeded ifname code from veth_newlink()
84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 ("veth: remove unneeded
ifname code from veth_newlink()") caused regression on veth
creation. This patch reverts the original one.
Reported-by: Michał Mirosław <mirqus@gmail.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rabin Vincent [Sat, 30 Apr 2011 08:29:27 +0000 (08:29 +0000)]
smsc95xx: fix reset check
The reset loop check should check the MII_BMCR register value for
BMCR_RESET rather than for MII_BMCR (the register address, which also
happens to be zero).
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafael J. Wysocki [Thu, 28 Apr 2011 11:02:15 +0000 (11:02 +0000)]
tg3: Fix failure to enable WoL by default when possible
tg3 is supposed to enable WoL by default on adapters which support
that, but it fails to do so unless the adapter's
/sys/devices/.../power/wakeup file contains 'enabled' during the
initialization of the adapter. Fix that by making tg3 use
device_set_wakeup_enable() to enable wakeup automatically whenever
WoL should be enabled by default.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lifeng Sun [Wed, 27 Apr 2011 22:04:51 +0000 (22:04 +0000)]
networking: inappropriate ioctl operation should return ENOTTY
ioctl() calls against a socket with an inappropriate ioctl operation
are incorrectly returning EINVAL rather than ENOTTY:
[ENOTTY]
Inappropriate I/O control operation.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=33992
Signed-off-by: Lifeng Sun <lifongsun@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Mon, 2 May 2011 09:59:29 +0000 (09:59 +0000)]
amd8111e: trivial typo spelling: Negotitate -> Negotiate
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 2 May 2011 19:21:47 +0000 (12:21 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6
Alexey Dobriyan [Sun, 1 May 2011 02:04:11 +0000 (02:04 +0000)]
ipv4: don't spam dmesg with "Using LC-trie" messages
fib_trie_table() is called during netns creation and
Chromium uses clone(CLONE_NEWNET) to sandbox renderer process.
Don't print anything.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric W. Biederman [Sun, 24 Apr 2011 01:54:57 +0000 (01:54 +0000)]
af_unix: Only allow recv on connected seqpacket sockets.
This fixes the following oops discovered by Dan Aloni:
> Anyway, the following is the output of the Oops that I got on the
> Ubuntu kernel on which I first detected the problem
> (2.6.37-12-generic). The Oops that followed will be more useful, I
> guess.
>[ 5594.669852] BUG: unable to handle kernel NULL pointer dereference
> at (null)
> [ 5594.681606] IP: [<
ffffffff81550b7b>] unix_dgram_recvmsg+0x1fb/0x420
> [ 5594.687576] PGD
2a05d067 PUD
2b951067 PMD 0
> [ 5594.693720] Oops: 0002 [#1] SMP
> [ 5594.699888] last sysfs file:
The bug was that unix domain sockets use a pseduo packet for
connecting and accept uses that psudo packet to get the socket.
In the buggy seqpacket case we were allowing unconnected
sockets to call recvmsg and try to receive the pseudo packet.
That is always wrong and as of commit
7361c36c5 the pseudo
packet had become enough different from a normal packet
that the kernel started oopsing.
Do for seqpacket_recv what was done for seqpacket_send in 2.5
and only allow it on connected seqpacket sockets.
Cc: stable@kernel.org
Tested-by: Dan Aloni <dan@aloni.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
artpol [Wed, 27 Apr 2011 17:49:14 +0000 (17:49 +0000)]
mii: add support of pause frames in mii_get_an
Add support of pause frames advertise in mii_get_an. This provides all drivers
that use mii_ethtool_gset to represent their own and Link partner flow control
abilities in ethtool.
Signed-off-by: Artem Polyakov <artpol84@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adam Jaremko [Thu, 28 Apr 2011 07:41:18 +0000 (07:41 +0000)]
net: ftmac100: fix scheduling while atomic during PHY link status change
Signed-off-by: Adam Jaremko <adam.jaremko@gmail.com>
Acked-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver Neukum [Fri, 29 Apr 2011 12:15:53 +0000 (14:15 +0200)]
usbnet: Transfer of maintainership
Somebody has to do it, however unfortunate be the cause.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Williams [Wed, 27 Apr 2011 09:54:28 +0000 (09:54 +0000)]
usbnet: add support for some Huawei modems with cdc-ether ports
Some newer Huawei devices (T-Mobile Rocket, others) have cdc-ether
compatible ports, so recognize and expose them.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Tue, 26 Apr 2011 10:30:11 +0000 (10:30 +0000)]
bnx2: cancel timer on device removal
This oops was recently reported to me:
invalid opcode: 0000 [#1] SMP
last sysfs file:
/sys/devices/pci0000:00/0000:00:01.0/0000:01:0d.0/0000:02:05.0/device
CPU 1
Modules linked in: bnx2(+) sunrpc ipv6 dm_mirror dm_region_hash dm_log sg
microcode serio_raw amd64_edac_mod edac_core edac_mce_amd k8temp i2c_piix4
shpchp ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase
scsi_transport_sas radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core
dm_mod [last unloaded: bnx2]
Modules linked in: bnx2(+) sunrpc ipv6 dm_mirror dm_region_hash dm_log sg
microcode serio_raw amd64_edac_mod edac_core edac_mce_amd k8temp i2c_piix4
shpchp ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase
scsi_transport_sas radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core
dm_mod [last unloaded: bnx2]
Pid: 23900, comm: pidof Not tainted 2.6.32-130.el6.x86_64 #1 BladeCenter LS21
-[797251Z]-
RIP: 0010:[<
ffffffffa058b270>] [<
ffffffffa058b270>] 0xffffffffa058b270
RSP: 0018:
ffff880002083e48 EFLAGS:
00010246
RAX:
ffff880002083e90 RBX:
ffff88007ccd4000 RCX:
0000000000000000
RDX:
0000000000000100 RSI:
dead000000200200 RDI:
ffff8800007b8700
RBP:
ffff880002083ed0 R08:
ffff88000208db40 R09:
0000022d191d27c8
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8800007b9bc8
R13:
ffff880002083e90 R14:
ffff8800007b8700 R15:
ffffffffa058b270
FS:
00007fbb3bcf7700(0000) GS:
ffff880002080000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000001664a98 CR3:
0000000060395000 CR4:
00000000000006e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
Process pidof (pid: 23900, threadinfo
ffff8800007e8000, task
ffff8800091c0040)
Stack:
ffffffff81079f77 ffffffff8109e010 ffff88007ccd5c20 ffff88007ccd5820
<0>
ffff88007ccd5420 ffff8800007e9fd8 ffff8800007e9fd8 0000010000000000
<0>
ffff88007ccd5020 ffff880002083e90 ffff880002083e90 ffffffff8102a00d
Call Trace:
<IRQ>
[<
ffffffff81079f77>] ? run_timer_softirq+0x197/0x340
[<
ffffffff8109e010>] ? tick_sched_timer+0x0/0xc0
[<
ffffffff8102a00d>] ? lapic_next_event+0x1d/0x30
[<
ffffffff8106f737>] __do_softirq+0xb7/0x1e0
[<
ffffffff81092cc0>] ? hrtimer_interrupt+0x140/0x250
[<
ffffffff81185f90>] ? filldir+0x0/0xe0
[<
ffffffff8100c2cc>] call_softirq+0x1c/0x30
[<
ffffffff8100df05>] do_softirq+0x65/0xa0
[<
ffffffff8106f525>] irq_exit+0x85/0x90
[<
ffffffff814e3340>] smp_apic_timer_interrupt+0x70/0x9b
[<
ffffffff8100bc93>] apic_timer_interrupt+0x13/0x20
<EOI>
[<
ffffffff81211ba5>] ? selinux_file_permission+0x45/0x150
[<
ffffffff81262a75>] ? _atomic_dec_and_lock+0x55/0x80
[<
ffffffff812050c6>] security_file_permission+0x16/0x20
[<
ffffffff811861c1>] vfs_readdir+0x71/0xe0
[<
ffffffff81186399>] sys_getdents+0x89/0xf0
[<
ffffffff8100b172>] system_call_fastpath+0x16/0x1b
It occured during some stress testing, in which the reporter was repeatedly
removing and modprobing the bnx2 module while doing various other random
operations on the bnx2 registered net device. Noting that this error occured on
a serdes based device, we noted that there were a few ethtool operations (most
notably self_test and set_phys_id) that have execution paths that lead into
bnx2_setup_serdes_phy. This function is notable because it executes a mod_timer
call, which starts the bp->timer running. Currently bnx2 is setup to assume
that this timer only nees to be stopped when bnx2_close or bnx2_suspend is
called. Since the above ethtool operations are not gated on the net device
having been opened however, that assumption is incorrect, and can lead to the
timer still running after the module has been removed, leading to the oops above
(as well as other simmilar oopses).
Fix the problem by ensuring that the timer is stopped when pci_device_unregister
is called.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Hushan Jia <hjia@redhat.com>
CC: Michael Chan <mchan@broadcom.com>
CC: "David S. Miller" <davem@davemloft.net>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stanislaw Gruszka [Fri, 29 Apr 2011 15:51:56 +0000 (17:51 +0200)]
iwl4965: fix "Received BA when not expected"
Need to use broadcast sta_id for management frames, otherwise we broke
BA session in the firmware and get messages like that:
"Received BA when not expected"
or (on older kernels):
"BA scd_flow 0 does not match txq_id 10"
This fix regression introduced in 2.6.35 during station management
code rewrite by:
commit
2a87c26bbe9587baeb9e56d3ce0b4971bd777643
Author: Johannes Berg <johannes.berg@intel.com>
Date: Fri Apr 30 11:30:45 2010 -0700
iwlwifi: use iwl_find_station less
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Fri, 29 Apr 2011 15:51:06 +0000 (17:51 +0200)]
iwlagn: fix "Received BA when not expected"
Need to use broadcast sta_id for management frames, otherwise we broke
BA session in the firmware and get messages like that:
"Received BA when not expected"
or (on older kernels):
"BA scd_flow 0 does not match txq_id 10"
This fix regression introduced in 2.6.35 during station management
code rewrite by:
commit
2a87c26bbe9587baeb9e56d3ce0b4971bd777643
Author: Johannes Berg <johannes.berg@intel.com>
Date: Fri Apr 30 11:30:45 2010 -0700
iwlwifi: use iwl_find_station less
Patch partially resolve:
https://bugzilla.kernel.org/show_bug.cgi?id=16691
However, there are still 11n performance problems on 4965 and 5xxx
devices that need to be investigated.
Cc: stable@kernel.org # 2.6.35+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Peter Korsgaard [Tue, 26 Apr 2011 01:45:41 +0000 (01:45 +0000)]
dsa/mv88e6131: fix unknown multicast/broadcast forwarding on mv88e6085
The 88e6085 has a few differences from the other devices in the port
control registers, causing unknown multicast/broadcast packets to get
dropped when using the standard port setup.
At the same time update kconfig to clarify that the mv88e6085 is now
supported.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Stewart [Thu, 28 Apr 2011 05:43:37 +0000 (05:43 +0000)]
usbnet: Resubmit interrupt URB if device is open
Resubmit interrupt URB if device is open. Use a flag set in
usbnet_open() to determine this state. Also kill and free
interrupt URB in usbnet_disconnect().
[Rebased off git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git]
Signed-off-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stanislaw Gruszka [Thu, 28 Apr 2011 09:36:54 +0000 (11:36 +0200)]
iwl4965: fix "TX Power requested while scanning"
Fix the following:
WARNING: at drivers/net/wireless/iwlegacy/iwl-4965.c:1128 \
iwl4965_send_tx_power+0x61/0x102 [iwl4965]() Hardware name: [...]
TX Power requested while scanning!
Pid: 5723, comm: kworker/u:28 Not tainted 2.6.39-0.rc4.4.fc14.x86_64 #1
Call Trace:
[<
ffffffff8104e27b>] warn_slowpath_common+0x85/0x9d
[<
ffffffffa02782e0>] ? iwl4965_show_temperature+0x49/0x49 [iwl4965]
[<
ffffffff8104e336>] warn_slowpath_fmt+0x46/0x48
[<
ffffffffa027712f>] iwl4965_send_tx_power+0x61/0x102 [iwl4965]
[<
ffffffff81477e05>] ? mutex_lock+0x36/0x50
[<
ffffffffa0278337>] iwl4965_bg_txpower_work+0x57/0x73 [iwl4965]
[<
ffffffff810647f3>] process_one_work+0x18d/0x286
[<
ffffffff81065a5e>] worker_thread+0xfd/0x181
[<
ffffffff81065961>] ? manage_workers.clone.16+0x172/0x172
[<
ffffffff81069036>] kthread+0x82/0x8a
[<
ffffffff81480524>] kernel_thread_helper+0x4/0x10
[<
ffffffff81068fb4>] ? kthread_worker_fn+0x14b/0x14b
[<
ffffffff81480520>] ? gs_change+0x13/0x13
Reported-and-tested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Wey-Yi Guy [Mon, 25 Apr 2011 18:12:57 +0000 (11:12 -0700)]
iwlegacy: led stay solid on when no traffic
commit
5ed540aecc2aae92d5c97b9a9306a5bf88ad5574 change the led behavior
for iwlwifi driver; the side effect cause led blink all the time.
Modify the led blink table to fix this problem
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Tue, 19 Apr 2011 20:49:29 +0000 (22:49 +0200)]
b43: trivial: update module info about ucode16_mimo firmware
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Steffen Klassert [Mon, 25 Apr 2011 19:41:21 +0000 (19:41 +0000)]
xfrm: Check for the new replay implementation if an esn state is inserted
IPsec extended sequence numbers can be used only with the new
anti-replay window implementation. So check if the new implementation
is used if an esn state is inserted and return an error if it is not.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Mon, 25 Apr 2011 19:40:23 +0000 (19:40 +0000)]
esp6: Fix scatterlist initialization
When we use IPsec extended sequence numbers, we may overwrite
the last scatterlist of the associated data by the scatterlist
for the skb. This patch fixes this by placing the scatterlist
for the skb right behind the last scatterlist of the associated
data. esp4 does it already like that.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Mon, 25 Apr 2011 19:39:24 +0000 (19:39 +0000)]
xfrm: Fix replay window size calculation on initialization
On replay initialization, we compute the size of the replay
buffer to see if the replay window fits into the buffer.
This computation lacks a mutliplication by 8 because we need
the size in bit, not in byte. So we might return an error
even though the replay window would fit into the buffer.
This patch fixes this issue.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Held Bernhard [Sun, 24 Apr 2011 22:07:32 +0000 (22:07 +0000)]
net: provide cow_metrics() methods to blackhole dst_ops
Since commit
62fa8a846d7d (net: Implement read-only protection and COW'ing
of metrics.) the kernel throws an oops.
[ 101.620985] BUG: unable to handle kernel NULL pointer dereference at
(null)
[ 101.621050] IP: [< (null)>] (null)
[ 101.621084] PGD
6e53c067 PUD
3dd6a067 PMD 0
[ 101.621122] Oops: 0010 [#1] SMP
[ 101.621153] last sysfs file: /sys/devices/virtual/ppp/ppp/uevent
[ 101.621192] CPU 2
[ 101.621206] Modules linked in: l2tp_ppp pppox ppp_generic slhc
l2tp_netlink l2tp_core deflate zlib_deflate twofish_x86_64
twofish_common des_generic cbc ecb sha1_generic hmac af_key
iptable_filter snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device loop
snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec
snd_pcm snd_timer snd i2c_i801 iTCO_wdt psmouse soundcore snd_page_alloc
evdev uhci_hcd ehci_hcd thermal
[ 101.621552]
[ 101.621567] Pid: 5129, comm: openl2tpd Not tainted 2.6.39-rc4-Quad #3
Gigabyte Technology Co., Ltd. G33-DS3R/G33-DS3R
[ 101.621637] RIP: 0010:[<
0000000000000000>] [< (null)>] (null)
[ 101.621684] RSP: 0018:
ffff88003ddeba60 EFLAGS:
00010202
[ 101.621716] RAX:
ffff88003ddb5600 RBX:
ffff88003ddb5600 RCX:
0000000000000020
[ 101.621758] RDX:
ffffffff81a69a00 RSI:
ffffffff81b7ee61 RDI:
ffff88003ddb5600
[ 101.621800] RBP:
ffff8800537cd900 R08:
0000000000000000 R09:
ffff88003ddb5600
[ 101.621840] R10:
0000000000000005 R11:
0000000000014b38 R12:
ffff88003ddb5600
[ 101.621881] R13:
ffffffff81b7e480 R14:
ffffffff81b7e8b8 R15:
ffff88003ddebad8
[ 101.621924] FS:
00007f06e4182700(0000) GS:
ffff88007fd00000(0000)
knlGS:
0000000000000000
[ 101.621971] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 101.622005] CR2:
0000000000000000 CR3:
0000000045274000 CR4:
00000000000006e0
[ 101.622046] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 101.622087] DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
[ 101.622129] Process openl2tpd (pid: 5129, threadinfo
ffff88003ddea000, task
ffff88003de9a280)
[ 101.622177] Stack:
[ 101.622191]
ffffffff81447efa ffff88007d3ded80 ffff88003de9a280
ffff88007d3ded80
[ 101.622245]
0000000000000001 ffff88003ddebbb8 ffffffff8148d5a7
0000000000000212
[ 101.622299]
ffff88003dcea000 ffff88003dcea188 ffffffff00000001
ffffffff81b7e480
[ 101.622353] Call Trace:
[ 101.622374] [<
ffffffff81447efa>] ? ipv4_blackhole_route+0x1ba/0x210
[ 101.622415] [<
ffffffff8148d5a7>] ? xfrm_lookup+0x417/0x510
[ 101.622450] [<
ffffffff8127672a>] ? extract_buf+0x9a/0x140
[ 101.622485] [<
ffffffff8144c6a0>] ? __ip_flush_pending_frames+0x70/0x70
[ 101.622526] [<
ffffffff8146fbbf>] ? udp_sendmsg+0x62f/0x810
[ 101.622562] [<
ffffffff813f98a6>] ? sock_sendmsg+0x116/0x130
[ 101.622599] [<
ffffffff8109df58>] ? find_get_page+0x18/0x90
[ 101.622633] [<
ffffffff8109fd6a>] ? filemap_fault+0x12a/0x4b0
[ 101.622668] [<
ffffffff813fb5c4>] ? move_addr_to_kernel+0x64/0x90
[ 101.622706] [<
ffffffff81405d5a>] ? verify_iovec+0x7a/0xf0
[ 101.622739] [<
ffffffff813fc772>] ? sys_sendmsg+0x292/0x420
[ 101.622774] [<
ffffffff810b994a>] ? handle_pte_fault+0x8a/0x7c0
[ 101.622810] [<
ffffffff810b76fe>] ? __pte_alloc+0xae/0x130
[ 101.622844] [<
ffffffff810ba2f8>] ? handle_mm_fault+0x138/0x380
[ 101.622880] [<
ffffffff81024af9>] ? do_page_fault+0x189/0x410
[ 101.622915] [<
ffffffff813fbe03>] ? sys_getsockname+0xf3/0x110
[ 101.622952] [<
ffffffff81450c4d>] ? ip_setsockopt+0x4d/0xa0
[ 101.622986] [<
ffffffff813f9932>] ? sockfd_lookup_light+0x22/0x90
[ 101.623024] [<
ffffffff814b61fb>] ? system_call_fastpath+0x16/0x1b
[ 101.623060] Code: Bad RIP value.
[ 101.623090] RIP [< (null)>] (null)
[ 101.623125] RSP <
ffff88003ddeba60>
[ 101.623146] CR2:
0000000000000000
[ 101.650871] ---[ end trace
ca3856a7d8e8dad4 ]---
[ 101.651011] __sk_free: optmem leakage (160 bytes) detected.
The oops happens in dst_metrics_write_ptr()
include/net/dst.h:124: return dst->ops->cow_metrics(dst, p);
dst->ops->cow_metrics is NULL and causes the oops.
Provide cow_metrics() methods, like we did in commit
214f45c91bb
(net: provide default_advmss() methods to blackhole dst_ops)
Signed-off-by: Held Bernhard <berny156@gmx.de>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hans Petter Selasky [Mon, 25 Apr 2011 05:35:19 +0000 (22:35 -0700)]
cdc_ncm: fix short packet issue on some devices
The default maximum transmit length for NCM USB frames should be so
that a short packet happens at the end if the device supports a length
greater than the defined maximum. This is achieved by adding 4 bytes
to the maximum length so that the existing logic can fit a short
packet there.
Signed-off-by: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 24 Apr 2011 18:51:04 +0000 (11:51 -0700)]
Merge branch 'davem.r8169' of git://git./linux/kernel/git/romieu/netdev-2.6
François Romieu [Sun, 24 Apr 2011 15:38:48 +0000 (17:38 +0200)]
r8169: don't request firmware when there's no userspace.
The firmware is cached during the first successfull call to open() and
released once the network device is unregistered. The driver uses the
cached firmware between open() and unregister_netdev().
So far the firmware is optional : a failure to load the firmware does
not prevent open() to success. It is thus necessary to 1) unregister
all 816x / 810[23] devices and 2) force a driver probe to issue a new
firmware load.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Fixed-by: Ciprian Docan <docan@eden.rutgers.edu>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
Vladislav Zolotarov [Sat, 23 Apr 2011 07:44:46 +0000 (07:44 +0000)]
bnx2x: fix UDP csum offload
Fixed packets parameters for FW in UDP checksum offload flow.
Do not dereference TCP headers on non TCP frames.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Fri, 22 Apr 2011 08:10:59 +0000 (08:10 +0000)]
netconsole: fix deadlock when removing net driver that netconsole is using (v2)
A deadlock was reported to me recently that occured when netconsole was being
used in a virtual guest. If the virtio_net driver was removed while netconsole
was setup to use an interface that was driven by that driver, the guest
deadlocked. No backtrace was provided because netconsole was the only console
configured, but it became clear pretty quickly what the problem was. In
netconsole_netdev_event, if we get an unregister event, we call
__netpoll_cleanup with the target_list_lock held and irqs disabled.
__netpoll_cleanup can, if pending netpoll packets are waiting call
cancel_delayed_work_sync, which is a sleeping path. the might_sleep call in
that path gets triggered, causing a console warning to be issued. The
netconsole write handler of course tries to take the target_list_lock again,
which we already hold, causing deadlock.
The fix is pretty striaghtforward. Simply drop the target_list_lock and
re-enable irqs prior to calling __netpoll_cleanup, the re-acquire the lock, and
restart the loop. Confirmed by myself to fix the problem reported.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 22 Apr 2011 20:21:38 +0000 (13:21 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6
David S. Miller [Fri, 22 Apr 2011 04:17:25 +0000 (21:17 -0700)]
Revert "bridge: Forward reserved group addresses if !STP"
This reverts commit
1e253c3b8a1aeed51eef6fc366812f219b97de65.
It breaks 802.3ad bonding inside of a bridge.
The commit was meant to support transport bridging, and specifically
virtual machines bridged to an ethernet interface connected to a
switch port wiht 802.1x enabled.
But this isn't the way to do it, it breaks too many other things.
Signed-off-by: David S. Miller <davem@davemloft.net>
Tim Gardner [Wed, 20 Apr 2011 09:00:49 +0000 (09:00 +0000)]
atl1c: Fix work event interrupt/task races
The mechanism used to initiate work events from the interrupt
handler has a classic read/modify/write race between the interrupt
handler that sets the condition, and the worker task that reads and
clears the condition. Close these races by using atomic
bit fields.
Cc: stable@kernel.org
Cc: Jie Yang <jie.yang@atheros.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Thu, 21 Apr 2011 00:20:04 +0000 (00:20 +0000)]
be2net: increment work_counter in be_worker
The commit 609ff3b ("be2net: add code to display temperature of ASIC")
adds support to display temperature of ASIC but there is missing
increment of work_counter in be_worker. Because of this 1) the
function be_cmd_get_die_temperature is called every 1 second instead
of every 32 seconds 2) be_cmd_get_die_temperature is called, although
it is not supported. This patch fixes this bug.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Egerer [Wed, 20 Apr 2011 22:56:02 +0000 (22:56 +0000)]
ipv6: Remove hoplimit initialization to -1
The changes introduced with git-commit
a02e4b7d ("ipv6: Demark default
hoplimit as zero.") missed to remove the hoplimit initialization. As a
result, ipv6_get_mtu interprets the return value of dst_metric_raw
(-1) as 255 and answers ping6 with this hoplimit. This patche removes
the line such that ping6 is answered with the hoplimit value
configured via sysctl.
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrea Galbusera [Thu, 21 Apr 2011 02:21:21 +0000 (02:21 +0000)]
powerpc: Fix multicast problem in fs_enet driver
mac-fec.c was setting individual UDP address registers instead of multicast
group address registers when joining a multicast group.
This prevented from correctly receiving UDP multicast packets.
According to datasheet, replaced hash_table_high and hash_table_low
with grp_hash_table_high and grp_hash_table_low respectively.
Also renamed hash_table_* with grp_hash_table_* in struct fec declaration
for 8xx: these registers are used only for multicast there.
Tested on a MPC5121 based board.
Build tested also against mpc866_ads_defconfig.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shan Wei [Tue, 19 Apr 2011 22:52:49 +0000 (22:52 +0000)]
ipv6: udp: fix the wrong headroom check
At this point, skb->data points to skb_transport_header.
So, headroom check is wrong.
For some case:bridge(UFO is on) + eth device(UFO is off),
there is no enough headroom for IPv6 frag head.
But headroom check is always false.
This will bring about data be moved to there prior to skb->head,
when adding IPv6 frag header to skb.
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stanislaw Gruszka [Wed, 20 Apr 2011 14:01:46 +0000 (16:01 +0200)]
iwl4965: fix skb usage after free
Since
commit
a120e912eb51e347f36c71b60a1d13af74d30e83
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Fri Feb 19 15:47:33 2010 -0800
iwlwifi: sanity check before counting number of tfds can be free
we use skb->data after calling ieee80211_tx_status_irqsafe(), which
could free skb instantly.
On current kernels I do not observe practical problems related with
bug, but on 2.6.35.y it cause random system hangs when stressing
wireless link, making bisection of other problems impossible.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Wed, 20 Apr 2011 13:57:14 +0000 (15:57 +0200)]
iwlwifi: fix skb usage after free
Since
commit
a120e912eb51e347f36c71b60a1d13af74d30e83
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Fri Feb 19 15:47:33 2010 -0800
iwlwifi: sanity check before counting number of tfds can be free
we use skb->data after calling ieee80211_tx_status_irqsafe(), which
could free skb instantly.
On current kernels I do not observe practical problems related with
bug, but on 2.6.35.y it cause random system hangs when stressing
wireless link.
Cc: stable@kernel.org # 2.6.32+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Tue, 19 Apr 2011 18:44:04 +0000 (20:44 +0200)]
mac80211: fix SMPS debugfs locking
The locking with SMPS requests means that the
debugs file should lock the mgd mutex, not the
iflist mutex. Calls to __ieee80211_request_smps()
need to hold that mutex, so add an assertion.
This has always been wrong, but for some reason
never been noticed, probably because the locking
error only happens while unassociated.
Cc: stable@kernel.org [2.6.34+]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Wed, 20 Apr 2011 19:56:44 +0000 (15:56 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/padovan/bluetooth-2.6
Oliver Hartkopp [Wed, 20 Apr 2011 01:57:15 +0000 (01:57 +0000)]
can: add missing socket check in can/raw release
v2: added space after 'if' according code style.
We can get here with a NULL socket argument passed from userspace,
so we need to handle it accordingly.
Thanks to Dave Jones pointing at this issue in net/can/bcm.c
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Bohac [Tue, 19 Apr 2011 02:09:55 +0000 (02:09 +0000)]
bonding: 802.3ad - fix agg_device_up
The slave member of struct aggregator does not necessarily point
to a slave which is part of the aggregator. It points to the
slave structure containing the aggregator structure, while
completely different slaves (or no slaves at all) may be part of
the aggregator.
The agg_device_up() function wrongly uses agg->slave to find the state
of the aggregator. Use agg->lag_ports->slave instead. The bug has
been introduced by commit
4cd6fe1c6483cde93e2ec91f58b7af9c9eea51ad
("bonding: fix link down handling in 802.3ad mode").
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Breno Leitao [Tue, 19 Apr 2011 09:39:22 +0000 (09:39 +0000)]
ehea: Fix a DLPAR bug on ehea_rereg_mrs().
We are currently continuing if ehea_restart_qps() fails, when we
do a memory DLPAR (remove or add more memory to the system).
This patch just let the NAPI disabled if the ehea_restart_qps()
fails.
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Jones [Wed, 20 Apr 2011 03:36:59 +0000 (20:36 -0700)]
can: Add missing socket check in can/bcm release.
We can get here with a NULL socket argument passed from userspace,
so we need to handle it accordingly.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Fietkau [Thu, 14 Apr 2011 22:41:43 +0000 (00:41 +0200)]
ath9k: fix the return value of ath_stoprecv
The patch 'ath9k_hw: fix stopping rx DMA during resets' added code to detect
a condition where rx DMA was stopped, but the MAC failed to enter the idle
state. This condition requires a hardware reset, however the return value
of ath_stoprecv was 'true' in that case, which allowed it to skip the reset
when issuing a fast channel change.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Paul Stewart <pstew@google.com>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
David S. Miller [Tue, 19 Apr 2011 18:28:35 +0000 (11:28 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/kaber/nf-2.6
Jozsef Kadlecsik [Tue, 19 Apr 2011 13:59:15 +0000 (15:59 +0200)]
netfilter: ipset: Fix the order of listing of sets
A restoreable saving of sets requires that list:set type of sets
come last and the code part which should have taken into account
the ordering was broken. The patch fixes the listing order.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Ruiyi Zhang [Mon, 18 Apr 2011 03:04:30 +0000 (11:04 +0800)]
Bluetooth: Only keeping SAR bits when retransmitting one frame.
When retrasmitting one frame, only SAR bits in control field should
be kept.
Signed-off-by: Ruiyi Zhang <Ruiyi.zhang@atheros.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Luiz Augusto von Dentz [Fri, 8 Apr 2011 14:10:41 +0000 (17:10 +0300)]
Bluetooth: fix shutdown on SCO sockets
shutdown should wait for SCO link to be properly disconnected before
detroying the socket, otherwise an application using the socket may
assume link is properly disconnected before it really happens which
can be a problem when e.g synchronizing profile switch.
Signed-off-by: Luiz Augusto von Dentz <luiz.dentz-von@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Vinicius Costa Gomes [Mon, 11 Apr 2011 21:46:55 +0000 (18:46 -0300)]
Bluetooth: Fix keeping the command timer running
In the teardown path the reset command is sent to the controller,
this event causes the command timer to be reactivated.
So the timer is removed in two situations, when the adapter isn't
marked as UP and when we know that some command has been sent.
Reported-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Ville Tervo [Thu, 7 Apr 2011 11:59:50 +0000 (14:59 +0300)]
Bluetooth: Fix refcount balance for hci connection
hci_io_capa_reply_evt() holds reference for hciconnection. It's useless since
hci_io_capa_request_evt()/hci_simple_pair_complete_evt() already protects the
connection. In addition it leaves connection open after failed SSP pairing.
Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Daniel Halperin [Wed, 6 Apr 2011 19:47:25 +0000 (12:47 -0700)]
iwlwifi: fix frame injection for HT channels
For some reason, sending QoS configuration causes transmission to stop
after a single frame on HT channels when not associated. Removing the
extra QoS configuration has no effect on station mode, and fixes
injection mode.
Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Krishna Kumar [Thu, 14 Apr 2011 06:07:04 +0000 (06:07 +0000)]
ip6_pol_route panic: Do not allow VLAN on loopback
Several tests in the ipv6 routing code check IFF_LOOPBACK, and
allowing stacking such as VLAN'ing on top of loopback results in a
netdevice which reports IFF_LOOPBACK but really isn't the loopback
device.
Instead of spamming the ipv6 routing code with even more special tests,
simply disallow VLAN over loopback.
The result of this patch is:
# modprobe 8021q
# vconfig add lo 43
ERROR: trying to add VLAN #43 to IF -:lo:- error: Operation not supported
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yaniv Rosner [Mon, 18 Apr 2011 00:50:01 +0000 (17:50 -0700)]
bnx2x: Fix port identification problem
This patch fixes port identification on optic devices when there's no link on the port.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Francois Romieu [Mon, 18 Apr 2011 00:46:40 +0000 (17:46 -0700)]
r8169: add Realtek as maintainer.
Per Hayes's request.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 14 Apr 2011 05:55:37 +0000 (05:55 +0000)]
ip: ip_options_compile() resilient to NULL skb route
Scot Doyle demonstrated ip_options_compile() could be called with an skb
without an attached route, using a setup involving a bridge, netfilter,
and forged IP packets.
Let's make ip_options_compile() and ip_options_rcv_srr() a bit more
robust, instead of changing bridge/netfilter code.
With help from Hiroaki SHIMODA.
Reported-by: Scot Doyle <lkml@scotdoyle.com>
Tested-by: Scot Doyle <lkml@scotdoyle.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Thu, 14 Apr 2011 08:05:19 +0000 (08:05 +0000)]
bna: fix memory leak during RX path cleanup
The memory leak was caused by unintentional assignment of the Rx path
destroy callback function pointer to NULL just after correct
initialization.
Signed-off-by: Debashis Dutt <ddutt@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Thu, 14 Apr 2011 08:05:18 +0000 (08:05 +0000)]
bna: fix for clean fw re-initialization
During a kernel crash, bna control path state machine and firmware do not
get a notification and hence are not cleanly shutdown. The registers
holding driver/IOC state information are not reset back to valid
disabled/parking values. This causes subsequent driver initialization
to hang during kdump kernel boot. This patch, during the initialization
of first PCI function, resets corresponding register when unclean shutown
is detect by reading chip registers. This will make sure that ioc/fw
gets clean re-initialization.
Signed-off-by: Debashis Dutt <ddutt@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 14 Apr 2011 20:16:51 +0000 (13:16 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6
huajun li [Wed, 13 Apr 2011 15:43:32 +0000 (15:43 +0000)]
usbnet: Fix up 'FLAG_POINTTOPOINT' and 'FLAG_MULTI_PACKET' overlaps.
USB tethering does not work anymore since 2.6.39-rc2, but it's okay in
-rc1. The root cause is the new added mask code 'FLAG_POINTTOPOINT'
overlaps 'FLAG_MULTI_PACKET' in include/linux/usb/usbnet.h, this
causes logic issue in rx_process(). This patch cleans up the overlap.
Reported-and-Tested-by: Gottfried Haider <gottfried.haider@gmail.com>
Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stanislaw Gruszka [Wed, 13 Apr 2011 08:56:51 +0000 (10:56 +0200)]
iwlegacy: fix tx_power initialization
priv->tx_power_next is not initialized to max supported power,
but instead default value is used, what cause errors like
[ 58.597834] iwl3945 0000:03:00.0: Requested user TXPOWER 15 above upper limit 14.
[ 58.597839] iwl3945 0000:03:00.0: Error setting Tx power (-22).
if maximum tx power read from the eeprom is smaller than default.
In consequence card is unable to initialize properly. Fix the problem
and cleanup tx power initialization.
Reported-and-tested-by: Robin Dong <hao.bigrat@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
David S. Miller [Wed, 13 Apr 2011 19:01:14 +0000 (12:01 -0700)]
Revert "tcp: disallow bind() to reuse addr/port"
This reverts commit
c191a836a908d1dd6b40c503741f91b914de3348.
It causes known regressions for programs that expect to be able to use
SO_REUSEADDR to shutdown a socket, then successfully rebind another
socket to the same ID.
Programs such as haproxy and amavisd expect this to work.
This should fix kernel bugzilla 32832.
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Kumar Salecha [Tue, 12 Apr 2011 17:05:55 +0000 (17:05 +0000)]
qlcnic: limit skb frags for non tso packet
Machines are getting deadlock in four node cluster environment.
All nodes are accessing (find /gfs2 -depth -print|cpio -ocv > /dev/null)
200 GB storage on a GFS2 filesystem.
This result in memory fragmentation and driver receives 18 frags for
1448 byte packets.
For non tso packet, fw drops the tx request, if it has >14 frags.
Fixing it by pulling extra frags.
Cc: stable@kernel.org
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anatolij Gustschin [Tue, 12 Apr 2011 23:49:28 +0000 (23:49 +0000)]
net: can: mscan: fix build breakage in mpc5xxx_can
Commit
74888760d40b3ac9054f9c5fa07b566c0676ba2d
"dt/net: Eliminate users of of_platform_{,un}register_driver"
broke building mscan driver. Fix it.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jozsef Kadlecsik [Wed, 13 Apr 2011 11:45:57 +0000 (13:45 +0200)]
netfilter: ipset: set match and SET target fixes
The SET target with --del-set did not work due to using wrongly
the internal dimension of --add-set instead of --del-set.
Also, the checkentries did not release the set references when
returned an error. Bugs reported by Lennert Buytenhek.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Jozsef Kadlecsik [Wed, 13 Apr 2011 11:43:23 +0000 (13:43 +0200)]
netfilter: ipset: bitmap:ip,mac type requires "src" for MAC
Enforce that the second "src/dst" parameter of the set match and SET target
must be "src", because we have access to the source MAC only in the packet.
The previous behaviour, that the type required the second parameter
but actually ignored the value was counter-intuitive and confusing.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Patrick McHardy [Wed, 13 Apr 2011 11:32:28 +0000 (13:32 +0200)]
Merge branch 'master' of ssh:///linux/kernel/git/kaber/nf-2.6
Wei Yongjun [Tue, 12 Apr 2011 15:22:22 +0000 (15:22 +0000)]
sctp: fix oops while removed transport still using as retran path
Since we can not update retran path to unconfirmed transports,
when we remove a peer, the retran path may not be update if the
other transports are all unconfirmed, and we will still using
the removed transport as the retran path. This may cause panic
if retrasnmit happen.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Tue, 12 Apr 2011 15:20:48 +0000 (15:20 +0000)]
sctp: fix oops when updating retransmit path with DEBUG on
commit
fbdf501c9374966a56829ecca3a7f25d2b49a305
sctp: Do no select unconfirmed transports for retransmissions
Introduced the initial falt.
commit
d598b166ced20d9b9281ea3527c0e18405ddb803
sctp: Make sure we always return valid retransmit path
Solved the problem, but forgot to change the DEBUG statement.
Thus it was still possible to dereference a NULL pointer.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Tue, 12 Apr 2011 14:47:15 +0000 (14:47 +0000)]
net: Disable NETIF_F_TSO_ECN when TSO is disabled
NETIF_F_TSO_ECN has no effect when TSO is disabled; this just means
that feature state will be accurately reported to user-space.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Tue, 12 Apr 2011 14:38:37 +0000 (14:38 +0000)]
net: Disable all TSO features when SG is disabled
The feature flags NETIF_F_TSO and NETIF_F_TSO6 independently enable
TSO for IPv4 and IPv6 respectively. However, the test in
netdev_fix_features() and its predecessor functions was never updated
to check for NETIF_F_TSO6, possibly because it was originally proposed
that TSO for IPv6 would be dependent on both feature flags.
Now that these feature flags can be changed independently from
user-space and we depend on netdev_fix_features() to fix invalid
feature combinations, it's important to disable them both if
scatter-gather is disabled. Also disable NETIF_F_TSO_ECN so
user-space sees all TSO features as disabled.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 13 Apr 2011 00:10:52 +0000 (17:10 -0700)]
Merge branch 'sfc-2.6.39' of git://git./linux/kernel/git/bwh/sfc-2.6
Neil Turton [Mon, 11 Apr 2011 10:42:43 +0000 (11:42 +0100)]
sfc: Use rmb() to ensure reads occur in order
Enabling write-combining may also enable read reordering. The BIU is
only guaranteed to read from a 128-bit CSR or 64-bit SRAM word when
the host reads from its lowest address; otherwise the BIU may use the
latched value. Therefore we need to reinstate the read memory
barriers after the first read operation for each CSR or SRAM word.
Signed-off-by; Ben Hutchings <bhutchings@solarflare.com>
David S. Miller [Tue, 12 Apr 2011 22:33:23 +0000 (15:33 -0700)]
ieee802154: Remove hacked CFLAGS in net/ieee802154/Makefile
It adds -Wall (which the kernel carefully controls already) and of all
things -DDEBUG (which should be set by other means if desired, please
we have dynamic-debug these days).
Kill this noise.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Jones [Tue, 12 Apr 2011 22:29:54 +0000 (15:29 -0700)]
irda: fix locking unbalance in irda_sendmsg
5b40964eadea40509d353318d2c82e8b7bf5e8a5 ("irda: Remove BKL instances
from af_irda.c") introduced a path where we have a locking unbalance.
If we pass invalid flags, we unlock a socket we never locked,
resulting in this...
=====================================
[ BUG: bad unlock balance detected! ]
-------------------------------------
trinity/20101 is trying to release lock (sk_lock-AF_IRDA) at:
[<
ffffffffa057f001>] irda_sendmsg+0x207/0x21d [irda]
but there are no more locks to release!
other info that might help us debug this:
no locks held by trinity/20101.
stack backtrace:
Pid: 20101, comm: trinity Not tainted 2.6.39-rc3+ #3
Call Trace:
[<
ffffffffa057f001>] ? irda_sendmsg+0x207/0x21d [irda]
[<
ffffffff81085041>] print_unlock_inbalance_bug+0xc7/0xd2
[<
ffffffffa057f001>] ? irda_sendmsg+0x207/0x21d [irda]
[<
ffffffff81086aca>] lock_release+0xcf/0x18e
[<
ffffffff813ed190>] release_sock+0x2d/0x155
[<
ffffffffa057f001>] irda_sendmsg+0x207/0x21d [irda]
[<
ffffffff813e9f8c>] __sock_sendmsg+0x69/0x75
[<
ffffffff813ea105>] sock_sendmsg+0xa1/0xb6
[<
ffffffff81100ca3>] ? might_fault+0x5c/0xac
[<
ffffffff81086b7c>] ? lock_release+0x181/0x18e
[<
ffffffff81100cec>] ? might_fault+0xa5/0xac
[<
ffffffff81100ca3>] ? might_fault+0x5c/0xac
[<
ffffffff81133b94>] ? fcheck_files+0xb9/0xf0
[<
ffffffff813f387a>] ? copy_from_user+0x2f/0x31
[<
ffffffff813f3b70>] ? verify_iovec+0x52/0xa6
[<
ffffffff813eb4e3>] sys_sendmsg+0x23a/0x2b8
[<
ffffffff81086b7c>] ? lock_release+0x181/0x18e
[<
ffffffff810773c6>] ? up_read+0x28/0x2c
[<
ffffffff814bec3d>] ? do_page_fault+0x360/0x3b4
[<
ffffffff81087043>] ? trace_hardirqs_on_caller+0x10b/0x12f
[<
ffffffff810458aa>] ? finish_task_switch+0xb2/0xe3
[<
ffffffff8104583e>] ? finish_task_switch+0x46/0xe3
[<
ffffffff8108364a>] ? trace_hardirqs_off_caller+0x33/0x90
[<
ffffffff814bbaf9>] ? retint_swapgs+0x13/0x1b
[<
ffffffff81087043>] ? trace_hardirqs_on_caller+0x10b/0x12f
[<
ffffffff810a9dd3>] ? audit_syscall_entry+0x11c/0x148
[<
ffffffff8125609e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<
ffffffff814c22c2>] system_call_fastpath+0x16/0x1b
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Otavio Salvador [Tue, 12 Apr 2011 05:30:41 +0000 (05:30 +0000)]
net/natsami: store MAC into perm_addr
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
Otavio Salvador [Tue, 12 Apr 2011 05:30:40 +0000 (05:30 +0000)]
net/sis900: store MAC into perm_addr for SiS 900, 630E, 635 and 96x variants
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 12 Apr 2011 05:39:51 +0000 (05:39 +0000)]
connector: fix skb double free in cn_rx_skb()
When a skb is delivered to a registered callback, cn_call_callback()
incorrectly returns -ENODEV after freeing the skb, causing cn_rx_skb()
to free the skb a second time.
Reported-by: Eric B Munson <emunson@mgebm.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joakim Tjernlund [Tue, 12 Apr 2011 20:59:33 +0000 (13:59 -0700)]
net: Do not wrap sysctl igmp_max_memberships in IP_MULTICAST
controlling igmp_max_membership is useful even when IP_MULTICAST
is off.
Quagga(an OSPF deamon) uses multicast addresses for all interfaces
using a single socket and hits igmp_max_membership limit when
there are 20 interfaces or more.
Always export sysctl igmp_max_memberships in proc, just like
igmp_max_msf
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 11 Apr 2011 22:39:40 +0000 (22:39 +0000)]
inetpeer: reduce stack usage
On 64bit arches, we use 752 bytes of stack when cleanup_once() is called
from inet_getpeer().
Lets share the avl stack to save ~376 bytes.
Before patch :
# objdump -d net/ipv4/inetpeer.o | scripts/checkstack.pl
0x000006c3 unlink_from_pool [inetpeer.o]: 376
0x00000721 unlink_from_pool [inetpeer.o]: 376
0x00000cb1 inet_getpeer [inetpeer.o]: 376
0x00000e6d inet_getpeer [inetpeer.o]: 376
0x0004 inet_initpeers [inetpeer.o]: 112
# size net/ipv4/inetpeer.o
text data bss dec hex filename
5320 432 21 5773 168d net/ipv4/inetpeer.o
After patch :
objdump -d net/ipv4/inetpeer.o | scripts/checkstack.pl
0x00000c11 inet_getpeer [inetpeer.o]: 376
0x00000dcd inet_getpeer [inetpeer.o]: 376
0x00000ab9 peer_check_expire [inetpeer.o]: 328
0x00000b7f peer_check_expire [inetpeer.o]: 328
0x0004 inet_initpeers [inetpeer.o]: 112
# size net/ipv4/inetpeer.o
text data bss dec hex filename
5163 432 21 5616 15f0 net/ipv4/inetpeer.o
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Scot Doyle <lkml@scotdoyle.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Reviewed-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sujith Manoharan [Mon, 11 Apr 2011 17:26:55 +0000 (22:56 +0530)]
ath9k_htc: Fix ethtool reporting
Pass the correct module name and device interface so that
ethtool can display the proper values.
The firmware version will be fixed later on when the FW
can actually report a version. :)
Reported-by: Richard Farina <sidhayn@gmail.com>
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Tested-by: Richard Farina <sidhayn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Fri, 8 Apr 2011 18:13:18 +0000 (20:13 +0200)]
ath9k_hw: fix stopping rx DMA during resets
During PHY errors, the MAC can sometimes fail to enter an idle state on older
hardware (before AR9380) after an rx stop has been requested.
This typically shows up in the kernel log with messages like these:
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
------------[ cut here ]------------
WARNING: at drivers/net/wireless/ath/ath9k/recv.c:504 ath_stoprecv+0xcc/0xf0 [ath9k]()
Call Trace:
[<
8023f0e8>] dump_stack+0x8/0x34
[<
80075050>] warn_slowpath_common+0x78/0xa4
[<
80075094>] warn_slowpath_null+0x18/0x24
[<
80d66d60>] ath_stoprecv+0xcc/0xf0 [ath9k]
[<
80d642cc>] ath_set_channel+0xbc/0x270 [ath9k]
[<
80d65254>] ath_radio_disable+0x4a4/0x7fc [ath9k]
When this happens, the state that the MAC enters is easy to identify and
does not result in bogus DMA traffic, however to ensure a working state
after a channel change, the hardware should still be reset.
This patch adds detection for this specific MAC state, after which the above
warnings completely disappear in my tests.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Cc: Kyungwan Nam <Kyungwan.Nam@Atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Eric Dumazet [Tue, 12 Apr 2011 20:39:14 +0000 (13:39 -0700)]
bridge: reset IPCB in br_parse_ip_options
Commit
462fb2af9788a82 (bridge : Sanitize skb before it enters the IP
stack), missed one IPCB init before calling ip_options_compile()
Thanks to Scot Doyle for his tests and bug reports.
Reported-by: Scot Doyle <lkml@scotdoyle.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Acked-by: Bandan Das <bandan.das@stratus.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: Jan Lübbe <jluebbe@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Mon, 4 Apr 2011 13:22:11 +0000 (14:22 +0100)]
sfc: Do not use efx_process_channel_now() in online self-test
During self-tests we use efx_process_channel_now() to handle
completion and other events synchronously. This disables interrupts
and NAPI processing for the channel in question, but it may still be
interrupted by another channel. A single socket may receive packets
from multiple net devices or even multiple channels of the same net
device, so this can result in deadlock on a socket lock.
Receiving packets in process context will also result in incorrect
classification by the network cgroup classifier.
Therefore, we must only use efx_process_channel_now() in the offline
loopback tests (which never deliver packets up the stack) and not for
the online interrupt and event tests.
For the interrupt test, there is no reason to process events. We
only care that an interrupt is raised.
For the event test, we want to know whether events have been received,
and there may be many events ahead of the one we inject. Therefore
remove efx_channel::magic_count and instead test whether
efx_channel::eventq_read_ptr advances. This is currently an event
queue index and might wrap around to exactly the same value, resulting
in a false negative. Therefore move the masking to efx_event() and
efx_nic_eventq_read_ack() so that it cannot wrap within the time of
the test.
The event test also tries to diagnose failures by checking whether an
event was delivered without causing an interrupt. Add and use a
helper function that only does this.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Neil Turton [Mon, 4 Apr 2011 12:46:23 +0000 (13:46 +0100)]
sfc: Stop the TX queues during loopback self-tests
If the TX queues are running during loopback self tests, host
traffic gets looped back which causes the test to fail. Avoid
restarting the TX queues after the port reset so that any packets
sent by the host get held back until after the tests have completed.
[bwh: Also wake all TX queues at the end of self-tests.]
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
David S. Miller [Tue, 12 Apr 2011 01:59:05 +0000 (18:59 -0700)]
llc: Fix length check in llc_fixup_skb().
Fixes bugzilla #32872
The LLC stack pretends to support non-linear skbs but there is a
direct use of skb_tail_pointer() in llc_fixup_skb().
Use pskb_may_pull() to see if data_size bytes remain and can be
accessed linearly in the packet, instead of direct pointer checks.
Signed-off-by: David S. Miller <davem@davemloft.net>
Sjur Brændeland [Mon, 11 Apr 2011 10:11:30 +0000 (10:11 +0000)]
caif: performance bugfix - allow radio stack to prioritize packets.
In the CAIF Payload message the Packet Type indication must be set to
UNCLASSIFIED in order to allow packet prioritization in the modem's
network stack. Otherwise TCP-Ack is not prioritized in the modems
transmit queue.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sjur Brændeland [Mon, 11 Apr 2011 10:11:29 +0000 (10:11 +0000)]
caif: Bugfix use for_each_safe when removing list nodes.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
amit salecha [Mon, 11 Apr 2011 02:10:22 +0000 (02:10 +0000)]
netxen: limit skb frags for non tso packet
Machines are getting deadlock in four node cluster environment.
All nodes are accessing (find /gfs2 -depth -print|cpio -ocv > /dev/null)
200 GB storage on a GFS2 filesystem.
This result in memory fragmentation and driver receives 18 frags for
1448 byte packets.
For non tso packet, fw drops the tx request, if it has >14 frags.
Fixing it by pulling extra frags.
Cc: stable@kernel.org
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Pan(潘卫平) [Mon, 11 Apr 2011 00:16:32 +0000 (00:16 +0000)]
bonding:fix two typos
replace relpy with reply.
replace premanent with permanent.
Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Pan(潘卫平) [Mon, 11 Apr 2011 00:15:57 +0000 (00:15 +0000)]
net: fix tranmitted/tranmitting typo
replace tranmitted with transmitted.
replace tranmitting with transmitting.
Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Pan(潘卫平) [Sun, 10 Apr 2011 22:17:25 +0000 (22:17 +0000)]
bonding:delete unused rlb_interval_counter
Now, alb_bond_info uses rx_ntt,rlb_update_delay_counter and
rlb_update_retry_counter to decide when to call rlb_update_rx_clients().
Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Pan(潘卫平) [Sun, 10 Apr 2011 22:17:24 +0000 (22:17 +0000)]
bonding:delete unused alb_timer
Now bonding-alb uses delayed_work instead of timer_list.
Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / platform / kernel / linux-exynos.git / log