powerpc/book3s64/hash: Add cond_resched to avoid soft lockup warning

[ Upstream commit 16f6b67cf03cb43db7104acb2ca877bdc2606c92 ]

With large memory (8TB and more) hotplug, we can get soft lockup
warnings as below. These were caused by a long loop without any
explicit cond_resched which is a problem for !PREEMPT kernels.

Avoid this using cond_resched() while inserting hash page table
entries. We already do similar cond_resched() in __add_pages(), see
commit f64ac5e6e306 ("mm, memory_hotplug: add scheduling point to
__add_pages").

  rcu:     3-....: (24002 ticks this GP) idle=13e/1/0x4000000000000002 softirq=722/722 fqs=12001
   (t=24003 jiffies g=4285 q=2002)
  NMI backtrace for cpu 3
  CPU: 3 PID: 3870 Comm: ndctl Not tainted 5.3.0-197.18-default+ #2
  Call Trace:
    dump_stack+0xb0/0xf4 (unreliable)
    nmi_cpu_backtrace+0x124/0x130
    nmi_trigger_cpumask_backtrace+0x1ac/0x1f0
    arch_trigger_cpumask_backtrace+0x28/0x3c
    rcu_dump_cpu_stacks+0xf8/0x154
    rcu_sched_clock_irq+0x878/0xb40
    update_process_times+0x48/0x90
    tick_sched_handle.isra.16+0x4c/0x80
    tick_sched_timer+0x68/0xe0
    __hrtimer_run_queues+0x180/0x430
    hrtimer_interrupt+0x110/0x300
    timer_interrupt+0x108/0x2f0
    decrementer_common+0x114/0x120
  --- interrupt: 901 at arch_add_memory+0xc0/0x130
      LR = arch_add_memory+0x74/0x130
    memremap_pages+0x494/0x650
    devm_memremap_pages+0x3c/0xa0
    pmem_attach_disk+0x188/0x750
    nvdimm_bus_probe+0xac/0x2c0
    really_probe+0x148/0x570
    driver_probe_device+0x19c/0x1d0
    device_driver_attach+0xcc/0x100
    bind_store+0x134/0x1c0
    drv_attr_store+0x44/0x60
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1a0/0x270
    __vfs_write+0x3c/0x70
    vfs_write+0xd0/0x260
    ksys_write+0xdc/0x130
    system_call+0x5c/0x68

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191001084656.31277-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/security/book3s64: Report L1TF status in sysfs

[ Upstream commit 8e6b6da91ac9b9ec5a925b6cb13f287a54bd547d ]

Some PowerPC CPUs are vulnerable to L1TF to the same extent as to
Meltdown. It is also mitigated by flushing the L1D on privilege
transition.

Currently the sysfs gives a false negative on L1TF on CPUs that I
verified to be vulnerable, a Power9 Talos II Boston 004e 1202, PowerNV
T2P9D01.

Signed-off-by: Anthony Steinhauser <asteinhauser@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[mpe: Just have cpu_show_l1tf() call cpu_show_meltdown() directly]
Link: https://lore.kernel.org/r/20191029190759.84821-1-asteinhauser@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/powerpc: Skip tm-signal-sigreturn-nt if TM not available

[ Upstream commit 505127068d9b705a6cf335143239db91bfe7bbe2 ]

On systems where TM (Transactional Memory) is disabled the
tm-signal-sigreturn-nt test causes a SIGILL:

  test: tm_signal_sigreturn_nt
  tags: git_version:7c202575ef63
  !! child died by signal 4
  failure: tm_signal_sigreturn_nt

We should skip the test if TM is not available.

Fixes: 34642d70ac7e ("selftests/powerpc: Add checks for transactional sigreturn")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191104233524.24348-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

dtc: Use pkg-config to locate libyaml

[ Upstream commit 067c650c456e758f933aaf87a202f841d34be269 ]

Using Makefile's wildcard with absolute path to detect
the presence of libyaml results in false-positive
detection when cross-compiling e.g. in yocto environment.
The latter results in build error:
| scripts/dtc/yamltree.o: In function `yaml_propval_int':
| yamltree.c: undefined reference to `yaml_sequence_start_event_initialize'
| yamltree.c: undefined reference to `yaml_emitter_emit'
| yamltree.c: undefined reference to `yaml_scalar_event_initialize'
...
Use pkg-config to locate libyaml to address this scenario.

Signed-off-by: Pavel Modilaynen <pavel.modilaynen@axis.com>
[robh: silence stderr]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/timer-of: Use unique device name instead of timer

[ Upstream commit 4411464d6f8b5e5759637235a6f2b2a85c2be0f1 ]

If a hardware-specific driver does not provide a name, the timer-of core
falls back to device_node.name.  Due to generic DT node naming policies,
that name is almost always "timer", and thus doesn't identify the actual
timer used.

Fix this by using device_node.full_name instead, which includes the unit
addrees.

Example impact on /proc/timer_list:

    -Clock Event Device: timer
    +Clock Event Device: timer@fcfec400

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016144747.29538-3-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/asm9260: Add a check for of_clk_get

[ Upstream commit 6e001f6a4cc73cd06fc7b8c633bc4906c33dd8ad ]

asm9260_timer_init misses a check for of_clk_get.
Add a check for it and print errors like other clocksource drivers.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016124330.22211-1-hslester96@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: trigger: netdev: fix handling on interface rename

[ Upstream commit 5f820ed52371b4f5d8c43c93f03408d0dbc01e5b ]

The NETDEV_CHANGENAME code is not "unneeded" like it is stated in commit
4cb6560514fa ("leds: trigger: netdev: fix refcnt leak on interface
rename").

The event was accidentally misinterpreted equivalent to
NETDEV_UNREGISTER, but should be equivalent to NETDEV_REGISTER.

This was the case in the original code from the openwrt project.

Otherwise, you are unable to set netdev led triggers for (non-existent)
netdevices, which has to be renamed. This is the case, for example, for
ppp interfaces in openwrt.

Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger")
Fixes: 4cb6560514fa ("leds: trigger: netdev: fix refcnt leak on interface rename")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: an30259a: add a check for devm_regmap_init_i2c

[ Upstream commit fc7b5028f2627133c7c18734715a08829eab4d1f ]

an30259a_probe misses a check for devm_regmap_init_i2c and may cause
problems.
Add a check and print errors like other leds drivers.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: lm3692x: Handle failure to probe the regulator

[ Upstream commit 396128d2ffcba6e1954cfdc9a89293ff79cbfd7c ]

Instead use devm_regulator_get_optional since the regulator
is optional and check for errors.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: fsl-qdma: Handle invalid qdma-queue0 IRQ

[ Upstream commit 41814c4eadf8a791b6d07114f96e7e120e59555c ]

platform_get_irq_byname() might return -errno which later would be cast
to an unsigned int and used in IRQ handling code leading to usage of
wrong ID and errors about wrong irq_base.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Peng Ma <peng.ma@nxp.com>
Tested-by: Peng Ma <peng.ma@nxp.com>
Link: https://lore.kernel.org/r/20191004150826.6656-1-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-mapping: fix handling of dma-ranges for reserved memory (again)

[ Upstream commit a445e940ea686fc60475564009821010eb213be3 ]

Daniele reported that issue previously fixed in c41f9ea998f3
("drivers: dma-coherent: Account dma_pfn_offset when used with device
tree") reappear shortly after 43fc509c3efb ("dma-coherent: introduce
interface for default DMA pool") where fix was accidentally dropped.

Lets put fix back in place and respect dma-ranges for reserved memory.

Fixes: 43fc509c3efb ("dma-coherent: introduce interface for default DMA pool")

Reported-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
Tested-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
Tested-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-mapping: Add vmap checks to dma_map_single()

[ Upstream commit 4544b9f25e70eae9f70a243de0cc802aa5c8cb69 ]

As we've seen from USB and other areas[1], we need to always do runtime
checks for DMA operating on memory regions that might be remapped. This
adds vmap checks (similar to those already in USB but missing in other
places) into dma_map_single() so all callers benefit from the checking.

[1] https://git.kernel.org/linus/3840c5b78803b2b6cc1ff820100a74a092c40cbb

Suggested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
[hch: fixed the printk message]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-debug: add a schedule point in debug_dma_dump_mappings()

[ Upstream commit 9ff6aa027dbb98755f0265695354f2dd07c0d1ce ]

debug_dma_dump_mappings() can take a lot of cpu cycles :

lpk43:/# time wc -l /sys/kernel/debug/dma-api/dump
163435 /sys/kernel/debug/dma-api/dump

real 0m0.463s
user 0m0.003s
sys 0m0.459s

Let's add a cond_resched() to avoid holding cpu for too long.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/tools: Don't quote $objdump in scripts

[ Upstream commit e44ff9ea8f4c8a90c82f7b85bd4f5e497c841960 ]

Some of our scripts are passed $objdump and then call it as
"$objdump". This doesn't work if it contains spaces because we're
using ccache, for example you get errors such as:

  ./arch/powerpc/tools/relocs_check.sh: line 48: ccache ppc64le-objdump: No such file or directory
  ./arch/powerpc/tools/unrel_branch_check.sh: line 26: ccache ppc64le-objdump: No such file or directory

Fix it by not quoting the string when we expand it, allowing the shell
to do the right thing for us.

Fixes: a71aa05e1416 ("powerpc: Convert relocs_check to a shell script using grep")
Fixes: 4ea80652dc75 ("powerpc/64s: Tool to flag direct branches from unrelocated interrupt vectors")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024004730.32135-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/powerpc: Fixup clobbers for TM tests

[ Upstream commit a02cbc7ffe529ed58b6bbe54652104fc2c88bd77 ]

Some of our TM (Transactional Memory) tests, list "r1" (the stack
pointer) as a clobbered register.

GCC >= 9 doesn't accept this, and the build breaks:

  ptrace-tm-spd-tar.c: In function 'tm_spd_tar':
  ptrace-tm-spd-tar.c:31:2: error: listing the stack pointer register 'r1' in a clobber list is deprecated [-Werror=deprecated]
     31 |  asm __volatile__(
        |  ^~~
  ptrace-tm-spd-tar.c:31:2: note: the value of the stack pointer after an 'asm' statement must be the same as it was before the statement

We do have some fairly large inline asm blocks in these tests, and
some of them do change the value of r1. However they should all return
to C with the value in r1 restored, so I think it's legitimate to say
r1 is not clobbered.

As Segher points out, the r1 clobbers may have been added because of
the use of `or 1,1,1`, however that doesn't actually clobber r1.

Segher also points out that some of these tests do clobber LR, because
they call functions, and that is not listed in the clobbers, so add
that where appropriate.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191029095324.14669-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: st1232 - do not reset the chip too early

[ Upstream commit efd7bb08a762d4f6322054c6824bd942971ac563 ]

We should not be putting the chip into reset while interrupts are enabled
and ISR may be running. Fix this by installing a custom devm action and
powering off the device/resetting GPIO line from there. This ensures proper
ordering.

Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Don't fail hash page table insert for bolted mapping

[ Upstream commit 75838a3290cd4ebbd1f567f310ba04b6ef017ce4 ]

If the hypervisor returned H_PTEG_FULL for H_ENTER hcall, retry a hash page table
insert by removing a random entry from the group.

After some runtime, it is very well possible to find all the 8 hash page table
entry slot in the hpte group used for mapping. Don't fail a bolted entry insert
in that case. With Storage class memory a user can find this error easily since
a namespace enable/disable is equivalent to memory add/remove.

This results in failures as reported below:

$ ndctl create-namespace -r region1 -t pmem -m devdax -a 65536 -s 100M
libndctl: ndctl_dax_enable: dax1.3: failed to enable
  Error: namespace1.2: failed to enable

failed to create namespace: No such device or address

In kernel log we find the details as below:

Unable to create mapping for hot added memory 0xc000042006000000..0xc00004200d000000: -1
dax_pmem: probe of dax1.3 failed with error -14

This indicates that we failed to create a bolted hash table entry for direct-map
address backing the namespace.

We also observe failures such that not all namespaces will be enabled with
ndctl enable-namespace all command.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024093542.29777-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Mark accumulate_stolen_time() as notrace

[ Upstream commit eb8e20f89093b64f48975c74ccb114e6775cee22 ]

accumulate_stolen_time() is called prior to interrupt state being
reconciled, which can trip the warning in arch_local_irq_restore():

  WARNING: CPU: 5 PID: 1017 at arch/powerpc/kernel/irq.c:258 .arch_local_irq_restore+0x9c/0x130
  ...
  NIP .arch_local_irq_restore+0x9c/0x130
  LR  .rb_start_commit+0x38/0x80
  Call Trace:
    .ring_buffer_lock_reserve+0xe4/0x620
    .trace_function+0x44/0x210
    .function_trace_call+0x148/0x170
    .ftrace_ops_no_ops+0x180/0x1d0
    ftrace_call+0x4/0x8
    .accumulate_stolen_time+0x1c/0xb0
    decrementer_common+0x124/0x160

For now just mark it as notrace. We may change the ordering to call it
after interrupt state has been reconciled, but that is a larger
change.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024055932.27940-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Delete the debugfs folder of hisi_sas when the probe fails

[ Upstream commit cabe7c10c97a0857a9fb14b6c772ab784947995d ]

Although if the debugfs initialization fails, we will delete the debugfs
folder of hisi_sas, but we did not consider the scenario where debugfs was
successfully initialized, but the probe failed for other reasons. We found
out that hisi_sas folder is still remain after the probe failed.

When probe fail, we should delete debugfs folder to avoid the above issue.

Link: https://lore.kernel.org/r/1571926105-74636-18-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Replace in_softirq() check in hisi_sas_task_exec()

[ Upstream commit 550c0d89d52d3bec5c299f69b4ed5d2ee6b8a9a6 ]

For IOs from upper layer, preemption may be disabled as it may be called by
function __blk_mq_delay_run_hw_queue which will call get_cpu() (it disables
preemption). So if flags HISI_SAS_REJECT_CMD_BIT is set in function
hisi_sas_task_exec(), it may disable preempt twice after down() and up()
which will cause following call trace:

BUG: scheduling while atomic: fio/60373/0x00000002
Call trace:
dump_backtrace+0x0/0x150
show_stack+0x24/0x30
dump_stack+0xa0/0xc4
__schedule_bug+0x68/0x88
__schedule+0x4b8/0x548
schedule+0x40/0xd0
schedule_timeout+0x200/0x378
__down+0x78/0xc8
down+0x54/0x70
hisi_sas_task_exec.isra.10+0x598/0x8d8 [hisi_sas_main]
hisi_sas_queue_command+0x28/0x38 [hisi_sas_main]
sas_queuecommand+0x168/0x1b0 [libsas]
scsi_queue_rq+0x2ac/0x980
blk_mq_dispatch_rq_list+0xb0/0x550
blk_mq_do_dispatch_sched+0x6c/0x110
blk_mq_sched_dispatch_requests+0x114/0x1d8
__blk_mq_run_hw_queue+0xb8/0x130
__blk_mq_delay_run_hw_queue+0x1c0/0x220
blk_mq_run_hw_queue+0xb0/0x128
blk_mq_sched_insert_requests+0xdc/0x208
blk_mq_flush_plug_list+0x1b4/0x3a0
blk_flush_plug_list+0xdc/0x110
blk_finish_plug+0x3c/0x50
blkdev_direct_IO+0x404/0x550
generic_file_read_iter+0x9c/0x848
blkdev_read_iter+0x50/0x78
aio_read+0xc8/0x170
io_submit_one+0x1fc/0x8d8
__arm64_sys_io_submit+0xdc/0x280
el0_svc_common.constprop.0+0xe0/0x1e0
el0_svc_handler+0x34/0x90
el0_svc+0x10/0x14
...

To solve the issue, check preemptible() to avoid disabling preempt multiple
when flag HISI_SAS_REJECT_CMD_BIT is set.

Link: https://lore.kernel.org/r/1571926105-74636-5-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: csiostor: Don't enable IRQs too early

[ Upstream commit d6c9b31ac3064fbedf8961f120a4c117daa59932 ]

These are called with IRQs disabled from csio_mgmt_tmo_handler() so we
can't call spin_unlock_irq() or it will enable IRQs prematurely.

Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Link: https://lore.kernel.org/r/20191019085913.GA14245@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix SLI3 hba in loop mode not discovering devices

[ Upstream commit feff8b3d84d3d9570f893b4d83e5eab6693d6a52 ]

When operating in private loop mode, PLOGI exchanges are racing and the
driver tries to abort it's PLOGI. But the PLOGI abort ends up terminating
the login with the other end causing the other end to abort its PLOGI as
well. Discovery never fully completes.

Fix by disabling the PLOGI abort when private loop and letting the state
machine play out.

Link: https://lore.kernel.org/r/20191018211832.7917-5-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix hardlockup in lpfc_abort_handler

[ Upstream commit 91a52b617cdb8bf6d298892101c061d438b84a19 ]

In lpfc_abort_handler, the lock acquire order is hbalock (irqsave),
buf_lock (irq) and ring_lock (irq).  The issue is that in two places the
locks are released out of order - the buf_lock and the hbalock - resulting
in the cpu preemption/lock flags getting restored out of order and
deadlocking the cpu.

Fix the unlock order by fully releasing the hbalocks as well.

CC: Zhangguanghui <zhang.guanghui@h3c.com>
Link: https://lore.kernel.org/r/20191018211832.7917-7-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: compare full CHAP_A Algorithm strings

[ Upstream commit 9cef2a7955f2754257a7cddedec16edae7b587d0 ]

RFC 2307 states:

  For CHAP [RFC1994], in the first step, the initiator MUST send:

      CHAP_A=<A1,A2...>

   Where A1,A2... are proposed algorithms, in order of preference.
...
   For the Algorithm, as stated in [RFC1994], one value is required to
   be implemented:

       5     (CHAP with MD5)

LIO currently checks for this value by only comparing a single byte in
the tokenized Algorithm string, which means that any value starting with
a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by
comparing the entire tokenized string.

Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-2-ddiss@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: xilinx_dma: Clear desc_pendingcount in xilinx_dma_reset

[ Upstream commit 8a631a5a0f7d4a4a24dba8587d5d9152be0871cc ]

Whenever we reset the channel, we need to clear desc_pendingcount
along with desc_submitcount. Otherwise when a new transaction is
submitted, the irq coalesce level could be programmed to an incorrect
value in the axidma case.

This behavior can be observed when terminating pending transactions
with xilinx_dma_terminate_all() and then submitting new transactions
without releasing and requesting the channel.

Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1571150904-3988-8-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/tegra-smmu: Fix page tables in > 4 GiB memory

[ Upstream commit 96d3ab802e4930a29a33934373157d6dff1b2c7e ]

Page tables that reside in physical memory beyond the 4 GiB boundary are
currently not working properly. The reason is that when the physical
address for page directory entries is read, it gets truncated at 32 bits
and can cause crashes when passing that address to the DMA API.

Fix this by first casting the PDE value to a dma_addr_t and then using
the page frame number mask for the SMMU instance to mask out the invalid
bits, which are typically used for mapping attributes, etc.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu: rockchip: Free domain on .domain_free

[ Upstream commit 42bb97b80f2e3bf592e3e99d109b67309aa1b30e ]

IOMMU domain resource life is well-defined, managed
by .domain_alloc and .domain_free.

Therefore, domain-specific resources shouldn't be tied to
the device life, but instead to its domain.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: peaq-wmi: switch to using polled mode of input devices

[ Upstream commit 60d15095336cfb56dce5c7767ed3b8c6c1cf79a3 ]

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts peaq-wmi driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Because the new polling coded does not allow peeking inside the poller
structure to get the poll interval, we change the "debounce" process to
operate on the time basis, instead of counting events.

We also fix error handling during initialization, as previously we leaked
input device structure when we failed to register it.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/power/x86/intel-speed-select: Remove warning for unused result

[ Upstream commit abd120e3bdf3dd72ba1ed9ac077a861e0e3dc43a ]

Fix warning for:
isst-config.c: In function ‘set_cpu_online_offline’:
isst-config.c:221:3: warning: ignoring return value of ‘write’,
declared with attribute warn_unused_result [-Wunused-result]
   write(fd, "1\n", 2);

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/papr_scm: Fix an off-by-one check in papr_scm_meta_{get, set}

[ Upstream commit 612ee81b9461475b5a5612c2e8d71559dd3c7920 ]

A validation check to prevent out of bounds read/write inside
functions papr_scm_meta_{get,set}() is off-by-one that prevent reads
and writes to the last byte of the label area.

This bug manifests as a failure to probe a dimm when libnvdimm is
unable to read the entire config-area as advertised by
ND_CMD_GET_CONFIG_SIZE. This usually happens when there are large
number of namespaces created in the region backed by the dimm and the
label-index spans max possible config-area. An error of the form below
usually reported in the kernel logs:

[  255.293912] nvdimm: probe of nmem0 failed with error -22

The patch fixes these validation checks there by letting libnvdimm
access the entire config-area.

Fixes: 53e80bd042773('powerpc/nvdimm: Add support for multibyte read/write for metadata')
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190927062002.3169-1-vaibhav@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to update time in lazytime mode

[ Upstream commit fe1897eaa6646f5a64a4cee0e6473ed9887d324b ]

generic/018 reports an inconsistent status of atime, the
testcase is as below:
- open file with O_SYNC
- write file to construct fraged space
- calc md5 of file
- record {a,c,m}time
- defrag file --- do nothing
- umount & mount
- check {a,c,m}time

The root cause is, as f2fs enables lazytime by default, atime
update will dirty vfs inode, rather than dirtying f2fs inode (by set
with FI_DIRTY_INODE), so later f2fs_write_inode() called from VFS will
fail to update inode page due to our skip:

f2fs_write_inode()
if (is_inode_flag_set(inode, FI_DIRTY_INODE))
return 0;

So eventually, after evict(), we lose last atime for ever.

To fix this issue, we need to check whether {a,c,m,cr}time is
consistent in between inode cache and inode page, and only skip
f2fs_update_inode() if f2fs inode is not dirty and time is
consistent as well.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: atmel_mxt_ts - disable IRQ across suspend

[ Upstream commit 463fa44eec2fef50d111ed0199cf593235065c04 ]

Across suspend and resume, we are seeing error messages like the following:

atmel_mxt_ts i2c-PRP0001:00: __mxt_read_reg: i2c transfer failed (-121)
atmel_mxt_ts i2c-PRP0001:00: Failed to read T44 and T5 (-121)

This occurs because the driver leaves its IRQ enabled. Upon resume, there
is an IRQ pending, but the interrupt is serviced before both the driver and
the underlying I2C bus have been resumed. This causes EREMOTEIO errors.

Disable the IRQ in suspend, and re-enable it on resume. If there are cases
where the driver enters suspend with interrupts disabled, that's a bug we
should fix separately.

Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix list corruption in lpfc_sli_get_iocbq

[ Upstream commit 15498dc1a55b7aaea4b51ff03e3ff0f662e73f44 ]

After study, it was determined there was a double free of a CT iocb during
execution of lpfc_offline_prep and lpfc_offline.  The prep routine issued
an abort for some CT iocbs, but the aborts did not complete fast enough for
a subsequent routine that waits for completion. Thus the driver proceeded
to lpfc_offline, which releases any pending iocbs. Unfortunately, the
completions for the aborts were then received which re-released the ct
iocbs.

Turns out the issue for why the aborts didn't complete fast enough was not
their time on the wire/in the adapter. It was the lpfc_work_done routine,
which requires the adapter state to be UP before it calls
lpfc_sli_handle_slow_ring_event() to process the completions. The issue is
the prep routine takes the link down as part of it's processing.

To fix, the following was performed:

 - Prevent the offline routine from releasing iocbs that have had aborts
   issued on them. Defer to the abort completions. Also means the driver
   fully waits for the completions.  Given this change, the recognition of
   "driver-generated" status which then releases the iocb is no longer
   valid. As such, the change made in the commit 296012285c90 is reverted.
   As recognition of "driver-generated" status is no longer valid, this
   patch reverts the changes made in
   commit 296012285c90 ("scsi: lpfc: Fix leak of ELS completions on adapter reset")

 - Modify lpfc_work_done to allow slow path completions so that the abort
   completions aren't ignored.

 - Updated the fdmi path to recognize a CT request that fails due to the
   port being unusable. This stops FDMI retries. FDMI will be restarted on
   next link up.

Link: https://lore.kernel.org/r/20190922035906.10977-14-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: mxc: Only get the second IRQ when there is more than one IRQ

[ Upstream commit c8f3d144004dd3f471ffd414690d15a005e4acd6 ]

On some of i.MX SoCs like i.MX8QXP, there is ONLY one IRQ for each
GPIO bank, so it is better to check the IRQ count before getting
second IRQ to avoid below error message during probe:

[    1.070908] gpio-mxc 5d080000.gpio: IRQ index 1 not found
[    1.077420] gpio-mxc 5d090000.gpio: IRQ index 1 not found
[    1.083766] gpio-mxc 5d0a0000.gpio: IRQ index 1 not found
[    1.090122] gpio-mxc 5d0b0000.gpio: IRQ index 1 not found
[    1.096470] gpio-mxc 5d0c0000.gpio: IRQ index 1 not found
[    1.102804] gpio-mxc 5d0d0000.gpio: IRQ index 1 not found
[    1.109144] gpio-mxc 5d0e0000.gpio: IRQ index 1 not found
[    1.115475] gpio-mxc 5d0f0000.gpio: IRQ index 1 not found

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpt3sas: Reject NVMe Encap cmnds to unsupported HBA

[ Upstream commit 77fd4f2c88bf83205a21f9ca49fdcc0c7868dba9 ]

If any faulty application issues an NVMe Encapsulated commands to HBA which
doesn't support NVMe protocol then driver should return the command as
invalid with the following message.

"HBA doesn't support NVMe. Rejecting NVMe Encapsulated request."

Otherwise below page fault kernel panic will be observed while building the
PRPs as there is no PRP pools allocated for the HBA which doesn't support
NVMe drives.

RIP: 0010:_base_build_nvme_prp+0x3b/0xf0 [mpt3sas]
Call Trace:
 _ctl_do_mpt_command+0x931/0x1120 [mpt3sas]
 _ctl_ioctl_main.isra.11+0xa28/0x11e0 [mpt3sas]
 ? prepare_to_wait+0xb0/0xb0
 ? tty_ldisc_deref+0x16/0x20
 _ctl_ioctl+0x1a/0x20 [mpt3sas]
 do_vfs_ioctl+0xaa/0x620
 ? vfs_read+0x117/0x140
 ksys_ioctl+0x67/0x90
 __x64_sys_ioctl+0x1a/0x20
 do_syscall_64+0x60/0x190
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

[mkp: tweaked error string]

Link: https://lore.kernel.org/r/1568379890-18347-12-git-send-email-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix locking on mailbox command completion

[ Upstream commit 07b8582430370097238b589f4e24da7613ca6dd3 ]

Symptoms were seen of the driver not having valid data for mailbox
commands. After debugging, the following sequence was found:

The driver maintains a port-wide pointer of the mailbox command that is
currently in execution. Once finished, the port-wide pointer is cleared
(done in lpfc_sli4_mq_release()). The next mailbox command issued will set
the next pointer and so on.

The mailbox response data is only copied if there is a valid port-wide
pointer.

In the failing case, it was seen that a new mailbox command was being
attempted in parallel with the completion.  The parallel path was seeing
the mailbox no long in use (flag check under lock) and thus set the port
pointer.  The completion path had cleared the active flag under lock, but
had not touched the port pointer.  The port pointer is cleared after the
lock is released. In this case, the completion path cleared the just-set
value by the parallel path.

Fix by making the calls that clear mbox state/port pointer while under
lock.  Also slightly cleaned up the error path.

Link: https://lore.kernel.org/r/20190922035906.10977-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: mpt3sas: Fix clear pending bit in ioctl status

[ Upstream commit 782b281883caf70289ba6a186af29441a117d23e ]

When user issues diag register command from application with required size,
and if driver unable to allocate the memory, then it will fail the register
command. While failing the register command, driver is not currently
clearing MPT3_CMD_PENDING bit in ctl_cmds.status variable which was set
before trying to allocate the memory. As this bit is set, subsequent
register command will be failed with BUSY status even when user wants to
register the trace buffer will less memory.

Clear MPT3_CMD_PENDING bit in ctl_cmds.status before returning the diag
register command with no memory status.

Link: https://lore.kernel.org/r/1568379890-18347-4-git-send-email-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix discovery failures when target device connectivity bounces

[ Upstream commit 3f97aed6117c7677eb16756c4ec8b86000fd5822 ]

An issue was seen discovering all SCSI Luns when a target device undergoes
link bounce.

The driver currently does not qualify the FC4 support on the target.
Therefore it will send a SCSI PRLI and an NVMe PRLI. The expectation is
that the target will reject the PRLI if it is not supported. If a PRLI
times out, the driver will retry. The driver will not proceed with the
device until both SCSI and NVMe PRLIs are resolved.  In the failure case,
the device is FCP only and does not respond to the NVMe PRLI, thus
initiating the wait/retry loop in the driver.  During that time, a RSCN is
received (device bounced) causing the driver to issue a GID_FT.  The GID_FT
response comes back before the PRLI mess is resolved and it prematurely
cancels the PRLI retry logic and leaves the device in a STE_PRLI_ISSUE
state. Discovery with the target never completes or resets.

Fix by resetting the node state back to STE_NPR_NODE when GID_FT completes,
thereby restarting the discovery process for the node.

Link: https://lore.kernel.org/r/20190922035906.10977-10-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix spinlock_irq issues in lpfc_els_flush_cmd()

[ Upstream commit d38b4a527fe898f859f74a3a43d4308f48ac7855 ]

While reviewing the CT behavior, issues with spinlock_irq were seen. The
driver should be using spinlock_irqsave/irqrestore in the els flush
routine.

Changed to spinlock_irqsave/irqrestore.

Link: https://lore.kernel.org/r/20190922035906.10977-15-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "MIPS: futex: Emit Loongson3 sync workarounds within asm"

This reverts commit d754a529a8be55f009c6679d772c472c1632cd5b which was
commit 3c1d3f0979721a39dd2980c97466127ce65aa130 upstream.

This breaks the build and should be reverted.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-kernel@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "MIPS: futex: Restore \n after sync instructions"

This reverts commit dc9d0a75ce9af74612d6a4d052e4df2bddfe8ed4 which is
commit fd7710cb491f900eb63d2ce5aac0e682003e84e9 upstream.

This, and the follow-on patch, breaks the mips build so it needs to be
reverted.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.7

iwlwifi: pcie: move power gating workaround earlier in the flow

commit 0df36b90c47d93295b7e393da2d961b2f3b6cde4 upstream.

We need to reset the NIC after setting the bits to enable power
gating and that cannot be done too late in the flow otherwise it
cleans other registers and things that were already configured,
causing initialization to fail.

In order to fix this, move the function to the common code in trans.c
so it can be called directly from there at an earlier point, just
after the reset we already do during initialization.

Fixes: 9a47cb988338 ("iwlwifi: pcie: add workaround for power gating in integrated 22000")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205719
Cc: stable@ver.kernel.org # 5.4+
Reported-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: fix shutdown and recv work deadlock v2

commit 1c05839aa973cfae8c3db964a21f9c0eef8fcc21 upstream.

This fixes a regression added with:

commit e9e006f5fcf2bab59149cb38a48a4817c1b538b4
Author: Mike Christie <mchristi@redhat.com>
Date:   Sun Aug 4 14:10:06 2019 -0500

    nbd: fix max number of supported devs

where we can deadlock during device shutdown. The problem occurs if
the recv_work's nbd_config_put occurs after nbd_start_device_ioctl has
returned and the userspace app has droppped its reference via closing
the device and running nbd_release. The recv_work nbd_config_put call
would then drop the refcount to zero and try to destroy the config which
would try to do destroy_workqueue from the recv work.

This patch just has nbd_start_device_ioctl do a flush_workqueue when it
wakes so we know after the ioctl returns running works have exited. This
also fixes a possible race where we could try to reuse the device while
old recv_works are still running.

Cc: stable@vger.kernel.org
Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs")
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci: Add a quirk for broken command queuing

commit 75d27ea1abf7af3cc2cdec3513e74f52191605c8 upstream.

Command queuing has been reported broken on some systems based on Intel
GLK. A separate patch disables command queuing in some cases.

This patch adds a quirk for broken command queuing, which enables users
with problems to disable command queuing using sdhci module parameters for
quirks.

Fixes: 8ee82bda230f ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217095349.14592-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci: Workaround broken command queuing on Intel GLK

commit bedf9fc01ff1f40cfd1a79ccacedd9f3cd8e652a upstream.

Command queuing has been reported broken on some Lenovo systems based on
Intel GLK. This is likely a BIOS issue, so disable command queuing for
Intel GLK if the BIOS vendor string is "LENOVO".

Fixes: 8ee82bda230f ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217095349.14592-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-of-esdhc: fix P2020 errata handling

commit fe0acab448f68c3146235afe03fb932e242ec94c upstream.

Two previous patches introduced below quirks for P2020 platforms.
- SDHCI_QUIRK_RESET_AFTER_REQUEST
- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL

The patches made a mistake to add them in quirks2 of sdhci_host
structure, while they were defined for quirks.
host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;

This patch is to fix them.
host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;

Fixes: 05cb6b2a66fa ("mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support")
Fixes: a46e42712596 ("mmc: sdhci-of-esdhc: add erratum eSDHC5 support")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191216031842.40068-1-yangbo.lu@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci: Update the tuning failed messages to pr_debug level

commit 2c92dd20304f505b6ef43d206fff21bda8f1f0ae upstream.

Tuning support in DDR50 speed mode was added in SD Specifications Part1
Physical Layer Specification v3.01. Its not possible to distinguish
between v3.00 and v3.01 from the SCR and that is why since
commit 4324f6de6d2e ("mmc: core: enable CMD19 tuning for DDR50 mode")
tuning failures are ignored in DDR50 speed mode.

Cards compatible with v3.00 don't respond to CMD19 in DDR50 and this
error gets printed during enumeration and also if retune is triggered at
any time during operation. Update the printk level to pr_debug so that
these errors don't lead to false error reports.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20191206114326.15856-1-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support"

commit 8b6dc6b2d60221e90703babbc141f063b8a07e72 upstream.

This reverts commit 5dd195522562542bc6ebe6e7bd47890d8b7ca93c.

First, the fix seems to be plain wrong, since the erratum suggests
waiting 5ms before setting setting SYSCTL[RSTD], but this msleep()
happens after the call of sdhci_reset() which is where that bit gets
set (if SDHCI_RESET_DATA is in mask).

Second, walking the whole device tree to figure out if some node has a
"fsl,p2020-esdhc" compatible string is hugely expensive - about 70 to
100 us on our mpc8309 board. Walking the device tree is done under a
raw_spin_lock, so this is obviously really bad on an -rt system, and a
waste of time on all.

In fact, since esdhc_reset() seems to get called around 100 times per
second, that mpc8309 now spends 0.8% of its time determining that
it is not a p2020. Whether those 100 calls/s are normal or due to some
other bug or misconfiguration, regularly hitting a 100 us
non-preemptible window is unacceptable.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191204085447.27491-1-linux@rasmusvillemoes.dk
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-msm: Correct the offset and value for DDR_CONFIG register

commit fa56ac9792265354b565f28def7164e7d7db2b1e upstream.

The DDR_CONFIG register offset got updated after a specific
minor version of sdcc V4. This offset change has not been properly
taken care of while updating register changes for sdcc V5.

Correcting proper offset for this register.
Also updating this register value to reflect the recommended RCLK
delay.

Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/0101016ea738ec72-fa0f852d-20f8-474a-80b2-4b0ef63b132c-000000@us-west-2.amazonses.com
Fixes: f15358885dda ("mmc: sdhci-msm: Define new Register address map")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocxl: Fix concurrent AFU open and device removal

commit a58d37bce0d21cf7fbd589384c619e465ef2f927 upstream.

If an ocxl device is unbound through sysfs at the same time its AFU is
being opened by a user process, the open code may dereference freed
stuctures, which can lead to kernel oops messages. You'd have to hit a
tiny time window, but it's possible. It's fairly easy to test by
making the time window bigger artificially.

Fix it with a combination of 2 changes:
  - when an AFU device is found in the IDR by looking for the device
    minor number, we should hold a reference on the device until after
    the context is allocated. A reference on the AFU structure is kept
    when the context is allocated, so we can release the reference on
    the device after the context allocation.
  - with the fix above, there's still another even tinier window,
    between the time the AFU device is found in the IDR and the
    reference on the device is taken. We can fix this one by removing
    the IDR entry earlier, when the device setup is removed, instead
    of waiting for the 'release' device callback. With proper locking
    around the IDR.

Fixes: 75ca758adbaf ("ocxl: Create a clear delineation between ocxl backend & frontend")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190624144148.32022-1-fbarrat@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/irq: fix stack overflow verification

commit 099bc4812f09155da77eeb960a983470249c9ce1 upstream.

Before commit 0366a1c70b89 ("powerpc/irq: Run softirqs off the top of
the irq stack"), check_stack_overflow() was called by do_IRQ(), before
switching to the irq stack.
In that commit, do_IRQ() was renamed __do_irq(), and is now executing
on the irq stack, so check_stack_overflow() has just become almost
useless.

Move check_stack_overflow() call in do_IRQ() to do the check while
still on the current stack.

Fixes: 0366a1c70b89 ("powerpc/irq: Run softirqs off the top of the irq stack")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e033aa8116ab12b7ca9a9c75189ad0741e3b9b5f.1575872340.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/vcpu: Assume dedicated processors as non-preempt

commit 14c73bd344da60abaf7da3ea2e7733ddda35bbac upstream.

With commit 247f2f6f3c70 ("sched/core: Don't schedule threads on
pre-empted vCPUs"), the scheduler avoids preempted vCPUs to schedule
tasks on wakeup. This leads to wrong choice of CPU, which in-turn
leads to larger wakeup latencies. Eventually, it leads to performance
regression in latency sensitive benchmarks like soltp, schbench etc.

On Powerpc, vcpu_is_preempted() only looks at yield_count. If the
yield_count is odd, the vCPU is assumed to be preempted. However
yield_count is increased whenever the LPAR enters CEDE state (idle).
So any CPU that has entered CEDE state is assumed to be preempted.

Even if vCPU of dedicated LPAR is preempted/donated, it should have
right of first-use since they are supposed to own the vCPU.

On a Power9 System with 32 cores:
  # lscpu
  Architecture:        ppc64le
  Byte Order:          Little Endian
  CPU(s):              128
  On-line CPU(s) list: 0-127
  Thread(s) per core:  8
  Core(s) per socket:  1
  Socket(s):           16
  NUMA node(s):        2
  Model:               2.2 (pvr 004e 0202)
  Model name:          POWER9 (architected), altivec supported
  Hypervisor vendor:   pHyp
  Virtualization type: para
  L1d cache:           32K
  L1i cache:           32K
  L2 cache:            512K
  L3 cache:            10240K
  NUMA node0 CPU(s):   0-63
  NUMA node1 CPU(s):   64-127

  # perf stat -a -r 5 ./schbench
  v5.4                               v5.4 + patch
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 45                      50.0th: 45
        75.0000th: 62                      75.0th: 63
        90.0000th: 71                      90.0th: 74
        95.0000th: 77                      95.0th: 78
        *99.0000th: 91                     *99.0th: 82
        99.5000th: 707                     99.5th: 83
        99.9000th: 6920                    99.9th: 86
        min=0, max=10048                   min=0, max=96
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 45                      50.0th: 46
        75.0000th: 61                      75.0th: 64
        90.0000th: 72                      90.0th: 75
        95.0000th: 79                      95.0th: 79
        *99.0000th: 691                    *99.0th: 83
        99.5000th: 3972                    99.5th: 85
        99.9000th: 8368                    99.9th: 91
        min=0, max=16606                   min=0, max=117
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 45                      50.0th: 46
        75.0000th: 61                      75.0th: 64
        90.0000th: 71                      90.0th: 75
        95.0000th: 77                      95.0th: 79
        *99.0000th: 106                    *99.0th: 83
        99.5000th: 2364                    99.5th: 84
        99.9000th: 7480                    99.9th: 90
        min=0, max=10001                   min=0, max=95
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 45                      50.0th: 47
        75.0000th: 62                      75.0th: 65
        90.0000th: 72                      90.0th: 75
        95.0000th: 78                      95.0th: 79
        *99.0000th: 93                     *99.0th: 84
        99.5000th: 108                     99.5th: 85
        99.9000th: 6792                    99.9th: 90
        min=0, max=17681                   min=0, max=117
  Latency percentiles (usec)         Latency percentiles (usec)
        50.0000th: 46                      50.0th: 45
        75.0000th: 62                      75.0th: 64
        90.0000th: 73                      90.0th: 75
        95.0000th: 79                      95.0th: 79
        *99.0000th: 113                    *99.0th: 82
        99.5000th: 2724                    99.5th: 83
        99.9000th: 6184                    99.9th: 93
        min=0, max=9887                    min=0, max=111

   Performance counter stats for 'system wide' (5 runs):

  context-switches    43,373  ( +-  0.40% )   44,597 ( +-  0.55% )
  cpu-migrations       1,211  ( +-  5.04% )      220 ( +-  6.23% )
  page-faults         15,983  ( +-  5.21% )   15,360 ( +-  3.38% )

Waiman Long suggested using static_keys.

Fixes: 247f2f6f3c70 ("sched/core: Don't schedule threads on pre-empted vCPUs")
Cc: stable@vger.kernel.org # v4.18+
Reported-by: Parth Shah <parth@linux.ibm.com>
Reported-by: Ihor Pasichnyk <Ihor.Pasichnyk@ibm.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Tested-by: Parth Shah <parth@linux.ibm.com>
[mpe: Move the key and setting of the key to pseries/setup.c]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191213035036.6913-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mce: Fix possibly incorrect severity calculation on AMD

commit a3a57ddad061acc90bef39635caf2b2330ce8f21 upstream.

The function mce_severity_amd_smca() requires m->bank to be initialized
for correct operation. Fix the one case, where mce_severity() is called
without doing so.

Fixes: 6bda529ec42e ("x86/mce: Grade uncorrected errors for SMCA-enabled systems")
Fixes: d28af26faa0b ("x86/MCE: Initialize mce.bank in the case of a fatal error in mce_no_way_out()")
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Link: https://lkml.kernel.org/r/20191210000733.17979-4-jschoenh@amazon.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/MCE/AMD: Allow Reserved types to be overwritten in smca_banks[]

commit 966af20929ac24360ba3fac5533eb2ab003747da upstream.

Each logical CPU in Scalable MCA systems controls a unique set of MCA
banks in the system. These banks are not shared between CPUs. The bank
types and ordering will be the same across CPUs on currently available
systems.

However, some CPUs may see a bank as Reserved/Read-as-Zero (RAZ) while
other CPUs do not. In this case, the bank seen as Reserved on one CPU is
assumed to be the same type as the bank seen as a known type on another
CPU.

In general, this occurs when the hardware represented by the MCA bank
is disabled, e.g. disabled memory controllers on certain models, etc.
The MCA bank is disabled in the hardware, so there is no possibility of
getting an MCA/MCE from it even if it is assumed to have a known type.

For example:

Full system:
Bank  |  Type seen on CPU0  |  Type seen on CPU1
------------------------------------------------
 0    |         LS          |          LS
 1    |         UMC         |          UMC
 2    |         CS          |          CS

System with hardware disabled:
Bank  |  Type seen on CPU0  |  Type seen on CPU1
------------------------------------------------
 0    |         LS          |          LS
 1    |         UMC         |          RAZ
 2    |         CS          |          CS

For this reason, there is a single, global struct smca_banks[] that is
initialized at boot time. This array is initialized on each CPU as it
comes online. However, the array will not be updated if an entry already
exists.

This works as expected when the first CPU (usually CPU0) has all
possible MCA banks enabled. But if the first CPU has a subset, then it
will save a "Reserved" type in smca_banks[]. Successive CPUs will then
not be able to update smca_banks[] even if they encounter a known bank
type.

This may result in unexpected behavior. Depending on the system
configuration, a user may observe issues enumerating the MCA
thresholding sysfs interface. The issues may be as trivial as sysfs
entries not being available, or as severe as system hangs.

For example:

Bank  |  Type seen on CPU0  |  Type seen on CPU1
------------------------------------------------
 0    |         LS          |          LS
 1    |         RAZ         |          UMC
 2    |         CS          |          CS

Extend the smca_banks[] entry check to return if the entry is a
non-reserved type. Otherwise, continue so that CPUs that encounter a
known bank type can update smca_banks[].

Fixes: 68627a697c19 ("x86/mce/AMD, EDAC/mce_amd: Enumerate Reserved SMCA bank type")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191121141508.141273-1-Yazen.Ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/MCE/AMD: Do not use rdmsr_safe_on_cpu() in smca_configure()

commit 246ff09f89e54fdf740a8d496176c86743db3ec7 upstream.

... because interrupts are disabled that early and sending IPIs can
deadlock:

  BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
  in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
  no locks held by swapper/1/0.
  irq event stamp: 0
  hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  hardirqs last disabled at (0): [<ffffffff8106dda9>] copy_process+0x8b9/0x1ca0
  softirqs last  enabled at (0): [<ffffffff8106dda9>] copy_process+0x8b9/0x1ca0
  softirqs last disabled at (0): [<0000000000000000>] 0x0
  Preemption disabled at:
  [<ffffffff8104703b>] start_secondary+0x3b/0x190
  CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.5.0-rc2+ #1
  Hardware name: GIGABYTE MZ01-CE1-00/MZ01-CE1-00, BIOS F02 08/29/2018
  Call Trace:
   dump_stack
   ___might_sleep.cold.92
   wait_for_completion
   ? generic_exec_single
   rdmsr_safe_on_cpu
   ? wrmsr_on_cpus
   mce_amd_feature_init
   mcheck_cpu_init
   identify_cpu
   identify_secondary_cpu
   smp_store_cpu_info
   start_secondary
   secondary_startup_64

The function smca_configure() is called only on the current CPU anyway,
therefore replace rdmsr_safe_on_cpu() with atomic rdmsr_safe() and avoid
the IPI.

 [ bp: Update commit message. ]

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/157252708836.3876.4604398213417262402.stgit@buzz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/intel: Disable HPET on Intel Coffee Lake H platforms

commit f8edbde885bbcab6a2b4a1b5ca614e6ccb807577 upstream.

Coffee Lake H SoC has similar behavior as Coffee Lake, skewed HPET timer
once the SoCs entered PC10.

So let's disable HPET on CFL-H platforms.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: feng.tang@intel.com
Cc: harry.pan@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20191129062303.18982-1-kai.heng.feng@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Ensure 'params' is initialised when looking up sys register

commit 1ce74e96c2407df2b5867e5d45a70aacb8923c14 upstream.

Commit 4b927b94d5df ("KVM: arm/arm64: vgic: Introduce find_reg_by_id()")
introduced 'find_reg_by_id()', which looks up a system register only if
the 'id' index parameter identifies a valid system register. As part of
the patch, existing callers of 'find_reg()' were ported over to the new
interface, but this breaks 'index_to_sys_reg_desc()' in the case that the
initial lookup in the vCPU target table fails because we will then call
into 'find_reg()' for the system register table with an uninitialised
'param' as the key to the lookup.

GCC 10 is bright enough to spot this (amongst a tonne of false positives,
but hey!):

  | arch/arm64/kvm/sys_regs.c: In function ‘index_to_sys_reg_desc.part.0.isra’:
  | arch/arm64/kvm/sys_regs.c:983:33: warning: ‘params.Op2’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  |   983 |   (u32)(x)->CRn, (u32)(x)->CRm, (u32)(x)->Op2);
  | [...]

Revert the hunk of 4b927b94d5df which breaks 'index_to_sys_reg_desc()' so
that the old behaviour of checking the index upfront is restored.

Fixes: 4b927b94d5df ("KVM: arm/arm64: vgic: Introduce find_reg_by_id()")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191212094049.12437-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: Properly handle faulting of device mappings

commit 6d674e28f642e3ff676fbae2d8d1b872814d32b6 upstream.

A device mapping is normally always mapped at Stage-2, since there
is very little gain in having it faulted in.

Nonetheless, it is possible to end-up in a situation where the device
mapping has been removed from Stage-2 (userspace munmaped the VFIO
region, and the MMU notifier did its job), but present in a userspace
mapping (userpace has mapped it back at the same address). In such
a situation, the device mapping will be demand-paged as the guest
performs memory accesses.

This requires to be careful when dealing with mapping size, cache
management, and to handle potential execution of a device mapping.

Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191211165651.7889-2-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBD

commit 8715f05269bfbc6453e25e80825d781a82902f8e upstream.

The host reports support for the synthetic feature X86_FEATURE_SSBD
when any of the three following hardware features are set:
  CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31]
  CPUID.80000008H:EBX.AMD_SSBD[bit 24]
  CPUID.80000008H:EBX.VIRT_SSBD[bit 25]

Either of the first two hardware features implies the existence of the
IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does
not. Therefore, CPUID.80000008H:EBX.AMD_SSBD[bit 24] should only be
set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or
CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host.

Fixes: 4c6903a0f9d76 ("KVM: x86: fix reporting of AMD speculation bug CPUID leaf")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD

commit 396d2e878f92ec108e4293f1c77ea3bc90b414ff upstream.

The host reports support for the synthetic feature X86_FEATURE_SSBD
when any of the three following hardware features are set:
  CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31]
  CPUID.80000008H:EBX.AMD_SSBD[bit 24]
  CPUID.80000008H:EBX.VIRT_SSBD[bit 25]

Either of the first two hardware features implies the existence of the
IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does
not. Therefore, CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] should only be
set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or
CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host.

Fixes: 0c54914d0c52a ("KVM: x86: use Intel speculation bugs and features as derived in generic x86 code")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: Fix regression on big endian hosts

commit 228b607d8ea1b7d4561945058d5692709099d432 upstream.

VCPU_CR is the offset of arch.regs.ccr in kvm_vcpu.
arch/powerpc/include/asm/kvm_host.h defines arch.regs as a struct
pt_regs, and arch/powerpc/include/asm/ptrace.h defines the ccr field
of pt_regs as "unsigned long ccr".  Since unsigned long is 64 bits, a
64-bit load needs to be used to load it, unless an endianness specific
correction offset is added to access the desired subpart.  In this
case there is no reason to _not_ use a 64 bit load though.

Fixes: 6c85b7bc637b ("powerpc/kvm: Use UV_RETURN ucall to return to ultravisor")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Marcus Comstedt <marcus@mc.pp.se>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191215094900.46740-1-marcus@mc.pp.se
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iocost: over-budget forced IOs should schedule async delay

commit d7bd15a138aef3be227818aad9c501e43c89c8c5 upstream.

When over-budget IOs are force-issued through root cgroup,
iocg_kick_delay() adjusts the async delay accordingly but doesn't
actually schedule async throttle for the issuing task.  This bug is
pretty well masked because sooner or later the offending threads are
gonna get directly throttled on regular IOs or have async delay
scheduled by mem_cgroup_throttle_swaprate().

However, it can affect control quality on filesystem metadata heavy
operations.  Let's fix it by invoking blkcg_schedule_throttle() when
iocg_kick_delay() says async delay is needed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Cc: stable@vger.kernel.org
Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: validate the debug_want_extra_isize mount option at parse time

commit 9803387c55f7d2ce69aa64340c5fdc6b3027dbc8 upstream.

Instead of setting s_want_extra_size and then making sure that it is a
valid value afterwards, validate the field before we set it.  This
avoids races and other problems when remounting the file system.

Link: https://lore.kernel.org/r/20191215063020.GA11512@mit.edu
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-and-tested-by: syzbot+4a39a025912b265cacef@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: unlock on error in ext4_expand_extra_isize()

commit 7f420d64a08c1dcd65b27be82a27cf2bdb2e7847 upstream.

We need to unlock the xattr before returning on this error path.

Cc: stable@kernel.org # 4.13
Fixes: c03b45b853f5 ("ext4, project: expand inode extra size if possible")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20191213185010.6k7yl2tck3wlsdkt@kili.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check for directory entries too close to block end

commit 109ba779d6cca2d519c5dd624a3276d03e21948e upstream.

ext4_check_dir_entry() currently does not catch a case when a directory
entry ends so close to the block end that the header of the next
directory entry would not fit in the remaining space. This can lead to
directory iteration code trying to access address beyond end of current
buffer head leading to oops.

CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191202170213.4761-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix ext4_empty_dir() for directories with holes

commit 64d4ce892383b2ad6d782e080d25502f91bf2a38 upstream.

Function ext4_empty_dir() doesn't correctly handle directories with
holes and crashes on bh->b_data dereference when bh is NULL. Reorganize
the loop to use 'offset' variable all the times instead of comparing
pointers to current direntry with bh->b_data pointer. Also add more
strict checking of '.' and '..' directory entries to avoid entering loop
in possibly invalid state on corrupted filesystems.

References: CVE-2019-19037
CC: stable@vger.kernel.org
Fixes: 4e19d6b65fb4 ("ext4: allow directory holes")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191202170213.4761-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: imx: pll14xx: fix clk_pll14xx_wait_lock

commit c3a5fd15ed0c1494435e4e35fbee734ae46b5073 upstream.

The usage of readl_poll_timeout is wrong, the 3rd parameter(cond)
should be "val & LOCK_STATUS" not "val & LOCK_TIMEOUT_US",
It is not check whether the pll locked, LOCK_STATUS reflects the mask,
not LOCK_TIMEOUT_US.

Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc")
Cc: <stable@vger.kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: imx: clk-composite-8m: add lock to gate/mux

commit 073a01e8d7c23b3efb59a3d4c20aa546f9ec29a9 upstream.

There is a lock to divider in the composite driver, but that's not
enough. lock to gate/mux are also needed to provide exclusive access
to the register.

Fixes: d3ff9728134e ("clk: imx: Add imx composite clock")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table

commit ed11e31709d7ddb19d4dc451d5bbfb15129f4cad upstream.

There should be a sentinel of ulp_div_table, otherwise _get_table_div
may access data out of the array.

Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: baytrail: Really serialize all register accesses

commit 40ecab551232972a39cdd8b6f17ede54a3fdb296 upstream.

Commit 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")
added a spinlock around all register accesses because:

"There is a hardware issue in Intel Baytrail where concurrent GPIO register
 access might result reads of 0xffffffff and writes might get dropped
 completely."

Testing has shown that this does not catch all cases, there are still
2 problems remaining

1) The original fix uses a spinlock per byt_gpio device / struct,
additional testing has shown that this is not sufficient concurent
accesses to 2 different GPIO banks also suffer from the same problem.

This commit fixes this by moving to a single global lock.

2) The original fix did not add a lock around the register accesses in
the suspend/resume handling.

Since pinctrl-baytrail.c is using normal suspend/resume handlers,
interrupts are still enabled during suspend/resume handling. Nothing
should be using the GPIOs when they are being taken down, _but_ the
GPIOs themselves may still cause interrupts, which are likely to
use (read) the triggering GPIO. So we need to protect against
concurrent GPIO register accesses in the suspend/resume handlers too.

This commit fixes this by adding the missing spin_lock / unlock calls.

The 2 fixes together fix the Acer Switch 10 SW5-012 getting completely
confused after a suspend resume. The DSDT for this device has a bug
in its _LID method which reprograms the home and power button trigger-
flags requesting both high and low _level_ interrupts so the IRQs for
these 2 GPIOs continuously fire. This combined with the saving of
registers during suspend, triggers concurrent GPIO register accesses
resulting in saving 0xffffffff as pconf0 value during suspend and then
when restoring this on resume the pinmux settings get all messed up,
resulting in various I2C busses being stuck, the wifi no longer working
and often the tablet simply not coming out of suspend at all.

Cc: stable@vger.kernel.org
Fixes: 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sprd: Add clearing break interrupt operation

commit abeb2e9414d7e3a0d8417bc3b13d7172513ea8a0 upstream.

A break interrupt will be generated if the RX line was pulled low, which
means some abnomal behaviors occurred of the UART. In this case, we still
need to clear this break interrupt status, otherwise it will cause irq
storm to crash the whole system.

Fixes: b7396a38fb28 ("tty/serial: Add Spreadtrum sc9836-uart driver support")
Signed-off-by: Yonghan Ye <yonghan.ye@unisoc.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/925e51b73099c90158e080b8f5bed9b3b38c4548.1575460601.git.baolin.wang7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty/serial: atmel: fix out of range clock divider handling

commit cb47b9f8630ae3fa3f5fbd0c7003faba7abdf711 upstream.

Use MCK_DIV8 when the clock divider is > 65535. Unfortunately the mode
register was already written thus the clock selection is ignored.

Fix by doing the baud rate calulation before setting the mode.

Fixes: 5bf5635ac170 ("tty/serial: atmel: add fractional baud rate support")
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191216085403.17050-1-david.engraf@sysgo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: gsc_hpdi: check dma_alloc_coherent() return value

commit ab42b48f32d4c766420c3499ee9c0289b7028182 upstream.

The "auto-attach" handler function `gsc_hpdi_auto_attach()` calls
`dma_alloc_coherent()` in a loop to allocate some DMA data buffers, and
also calls it to allocate a buffer for a DMA descriptor chain.  However,
it does not check the return value of any of these calls.  Change
`gsc_hpdi_auto_attach()` to return `-ENOMEM` if any of these
`dma_alloc_coherent()` calls fail.  This will result in the comedi core
calling the "detach" handler `gsc_hpdi_detach()` as part of the
clean-up, which will call `gsc_hpdi_free_dma()` to free any allocated
DMA coherent memory buffers.

Cc: <stable@vger.kernel.org> #4.6+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20191216110823.216237-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes

commit 133b2acee3871ae6bf123b8fe34be14464aa3d2c upstream.

At least on the HP Envy x360 15-cp0xxx model the WMI interface
for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes,
otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS):

Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5

We do not care about the contents of the buffer, we just want to know
if the HPWMI_FEATURE2_QUERY command is supported.

This commits bumps the buffer size, fixing the error.

Fixes: 8a1513b4932 ("hp-wmi: limit hotkey enable")
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: msu: Fix window switching without windows

commit 05b686b573cfb35a227c30787083a6631ff0f0c9 upstream.

Commit 6cac7866c2741 ("intel_th: msu: Add a sysfs attribute to trigger
window switch") adds a NULL pointer dereference in the case when there are
no windows allocated:

> BUG: kernel NULL pointer dereference, address: 0000000000000000
> #PF: supervisor read access in kernel mode
> #PF: error_code(0x0000) - not-present page
> PGD 0 P4D 0
> Oops: 0000 1 SMP
> CPU: 5 PID: 1110 Comm: bash Not tainted 5.5.0-rc1+ #1
> RIP: 0010:msc_win_switch+0xa/0x80 [intel_th_msu]
> Call Trace:
> ? win_switch_store+0x9b/0xc0 [intel_th_msu]
> dev_attr_store+0x17/0x30
> sysfs_kf_write+0x3e/0x50
> kernfs_fop_write+0xda/0x1b0
> __vfs_write+0x1b/0x40
> vfs_write+0xb9/0x1a0
> ksys_write+0x67/0xe0
> __x64_sys_write+0x1a/0x20
> do_syscall_64+0x57/0x1d0
> entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix that by disallowing window switching with multiwindow buffers without
windows.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: 6cac7866c274 ("intel_th: msu: Add a sysfs attribute to trigger window switch")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Cc: stable@vger.kernel.org # v5.2+
Link: https://lore.kernel.org/r/20191217115527.74383-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: Fix freeing IRQs

commit ab832e38e4f0f45b16c3633714d868b7ec6b33b4 upstream.

Commit aac8da65174a ("intel_th: msu: Start handling IRQs") implicitly
relies on the use of devm_request_irq() to subsequently free the irqs on
device removal, but in case of the pci_free_irq_vectors() API, the
handlers need to be freed before it is called. Therefore, at the moment
the driver's remove path trips a BUG_ON(irq_has_action()):

> kernel BUG at drivers/pci/msi.c:375!
> invalid opcode: 0000 1 SMP
> CPU: 2 PID: 818 Comm: rmmod Not tainted 5.5.0-rc1+ #1
> RIP: 0010:free_msi_irqs+0x67/0x1c0
> pci_disable_msi+0x116/0x150
> pci_free_irq_vectors+0x1b/0x20
> intel_th_pci_remove+0x22/0x30 [intel_th_pci]
> pci_device_remove+0x3e/0xb0
> device_release_driver_internal+0xf0/0x1c0
> driver_detach+0x4c/0x8f
> bus_remove_driver+0x5c/0xd0
> driver_unregister+0x31/0x50
> pci_unregister_driver+0x40/0x90
> intel_th_pci_driver_exit+0x10/0xad6 [intel_th_pci]
> __x64_sys_delete_module+0x147/0x290
> ? exit_to_usermode_loop+0xd7/0x120
> do_syscall_64+0x57/0x1b0
> entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by explicitly freeing irqs before freeing the vectors. We keep
using the devm_* variants because they are still useful in early error
paths.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: aac8da65174a ("intel_th: msu: Start handling IRQs")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Cc: stable@vger.kernel.org # v5.2+
Link: https://lore.kernel.org/r/20191217115527.74383-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: pci: Add Elkhart Lake SOC support

commit 88385866bab8d5e18c7f45d1023052c783572e03 upstream.

This adds support for Intel Trace Hub in Elkhart Lake.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217115527.74383-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: pci: Add Comet Lake PCH-V support

commit e4de2a5d51f97a6e720a1c0911f93e2d8c2f1c08 upstream.

This adds Intel(R) Trace Hub PCI ID for Comet Lake PCH-V.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191217115527.74383-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: EHCI: Do not return -EPIPE when hub is disconnected

commit 64cc3f12d1c7dd054a215bc1ff9cc2abcfe35832 upstream.

When disconnecting a USB hub that has some child device(s) connected to it
(such as a USB mouse), then the stack tries to clear halt and
reset device(s) which are _already_ physically disconnected.

The issue has been reproduced with:

CPU: IMX6D5EYM10AD or MCIMX6D5EYM10AE.
SW: U-Boot 2019.07 and kernel 4.19.40.

CPU: HP Proliant Microserver Gen8.
SW: Linux version 4.2.3-300.fc23.x86_64

In this situation there will be error bit for MMF active yet the
CERR equals EHCI_TUNE_CERR + halt. Existing implementation
interprets this as a stall [1] (chapter 8.4.5).

The possible conditions when the MMF will be active + halt
can be found from [2] (Table 4-13).

Fix for the issue is to check whether MMF is active and PID Code is
IN before checking for the stall. If these conditions are true then
it is not a stall.

What happens after the fix is that when disconnecting a hub with
attached device(s) the situation is not interpret as a stall.

[1] [https://www.usb.org/document-library/usb-20-specification, usb_20.pdf]
[2] [https://www.intel.com/content/dam/www/public/us/en/documents/
     technical-specifications/ehci-specification-for-usb.pdf]

Signed-off-by: Erkka Talvitie <erkka.talvitie@vincit.fi>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ef70941d5f349767f19c0ed26b0dd9eed8ad81bb.1576050523.git.erkka.talvitie@vincit.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: vmscan: protect shrinker idr replace with CONFIG_MEMCG

commit 42a9a53bb394a1de2247ef78f0b802ae86798122 upstream.

Since commit 0a432dcbeb32 ("mm: shrinker: make shrinker not depend on
memcg kmem"), shrinkers' idr is protected by CONFIG_MEMCG instead of
CONFIG_MEMCG_KMEM, so it makes no sense to protect shrinker idr replace
with CONFIG_MEMCG_KMEM.

And in the CONFIG_MEMCG && CONFIG_SLOB case, shrinker_idr contains only
shrinker, and it is deferred_split_shrinker.  But it is never actually
called, since idr_replace() is never compiled due to the wrong #ifdef.
The deferred_split_shrinker all the time is staying in half-registered
state, and it's never called for subordinate mem cgroups.

Link: http://lkml.kernel.org/r/1575486978-45249-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: 0a432dcbeb32 ("mm: shrinker: make shrinker not depend on memcg kmem")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: asymmetric: return ENOMEM if akcipher_request_alloc() fails

commit bea37414453eb08d4ceffeb60a9d490dbc930cea upstream.

No error code was being set on this error path.

Cc: stable@vger.kernel.org
Fixes: ad4b1eb5fb33 ("KEYS: asym_tpm: Implement encryption operation [ver #2]")
Fixes: c08fed737126 ("KEYS: Implement encrypt, decrypt and sign for software asymmetric key [ver #2]")
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: Avoid leaving stale IRQ work items during CPU offline

commit 85572c2c4a45a541e880e087b5b17a48198b2416 upstream.

The scheduler code calling cpufreq_update_util() may run during CPU
offline on the target CPU after the IRQ work lists have been flushed
for it, so the target CPU should be prevented from running code that
may queue up an IRQ work item on it at that point.

Unfortunately, that may not be the case if dvfs_possible_from_any_cpu
is set for at least one cpufreq policy in the system, because that
allows the CPU going offline to run the utilization update callback
of the cpufreq governor on behalf of another (online) CPU in some
cases.

If that happens, the cpufreq governor callback may queue up an IRQ
work on the CPU running it, which is going offline, and the IRQ work
may not be flushed after that point.  Moreover, that IRQ work cannot
be flushed until the "offlining" CPU goes back online, so if any
other CPU calls irq_work_sync() to wait for the completion of that
IRQ work, it will have to wait until the "offlining" CPU is back
online and that may not happen forever.  In particular, a system-wide
deadlock may occur during CPU online as a result of that.

The failing scenario is as follows.  CPU0 is the boot CPU, so it
creates a cpufreq policy and becomes the "leader" of it
(policy->cpu).  It cannot go offline, because it is the boot CPU.
Next, other CPUs join the cpufreq policy as they go online and they
leave it when they go offline.  The last CPU to go offline, say CPU3,
may queue up an IRQ work while running the governor callback on
behalf of CPU0 after leaving the cpufreq policy because of the
dvfs_possible_from_any_cpu effect described above.  Then, CPU0 is
the only online CPU in the system and the stale IRQ work is still
queued on CPU3.  When, say, CPU1 goes back online, it will run
irq_work_sync() to wait for that IRQ work to complete and so it
will wait for CPU3 to go back online (which may never happen even
in principle), but (worse yet) CPU0 is waiting for CPU1 at that
point too and a system-wide deadlock occurs.

To address this problem notice that CPUs which cannot run cpufreq
utilization update code for themselves (for example, because they
have left the cpufreq policies that they belonged to), should also
be prevented from running that code on behalf of the other CPUs that
belong to a cpufreq policy with dvfs_possible_from_any_cpu set and so
in that case the cpufreq_update_util_data pointer of the CPU running
the code must not be NULL as well as for the CPU which is the target
of the cpufreq utilization update in progress.

Accordingly, change cpufreq_this_cpu_can_update() into a regular
function in kernel/sched/cpufreq.c (instead of a static inline in a
header file) and make it check the cpufreq_update_util_data pointer
of the local CPU if dvfs_possible_from_any_cpu is set for the target
cpufreq policy.

Also update the schedutil governor to do the
cpufreq_this_cpu_can_update() check in the non-fast-switch
case too to avoid the stale IRQ work issues.

Fixes: 99d14d0e16fa ("cpufreq: Process remote callbacks from any CPU if the platform permits")
Link: https://lore.kernel.org/linux-pm/20191121093557.bycvdo4xyinbc5cb@vireshk-i7/
Reported-by: Anson Huang <anson.huang@nxp.com>
Tested-by: Anson Huang <anson.huang@nxp.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Peng Fan <peng.fan@nxp.com> (i.MX8QXP-MEK)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/memreserve: Register reservations as 'reserved' in /proc/iomem

commit ab0eb16205b43ece4c78e2259e681ff3d645ea66 upstream.

Memory regions that are reserved using efi_mem_reserve_persistent()
are recorded in a special EFI config table which survives kexec,
allowing the incoming kernel to honour them as well. However,
such reservations are not visible in /proc/iomem, and so the kexec
tools that load the incoming kernel and its initrd into memory may
overwrite these reserved regions before the incoming kernel has a
chance to reserve them from further use.

Address this problem by adding these reservations to /proc/iomem as
they are created. Note that reservations that are inherited from a
previous kernel are memblock_reserve()'d early on, so they are already
visible in /proc/iomem.

Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Cc: <stable@vger.kernel.org> # v5.4+
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-2-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: fsl: use platform_get_irq() instead of of_irq_to_resource()

commit 63aa6a692595d47a0785297b481072086b9272d2 upstream.

Unlike irq_of_parse_and_map() which has a dummy definition on SPARC,
of_irq_to_resource() hasn't.

But as platform_get_irq() can be used instead and is generic, use it.

Reported-by: kbuild test robot <lkp@intel.com>
Suggested-by: Mark Brown <broonie@kernel.org>
Fixes:  3194d2533eff ("spi: fsl: don't map irq during probe")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/091a277fd0b3356dca1e29858c1c96983fc9cb25.1576172743.git.christophe.leroy@c-s.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: fsl: don't map irq during probe

commit 3194d2533efffae8b815d84729ecc58b6a9000ab upstream.

With lastest kernel, the following warning is observed at startup:

[    1.500609] ------------[ cut here ]------------
[    1.505225] remove_proc_entry: removing non-empty directory 'irq/22', leaking at least 'fsl_spi'
[    1.514234] WARNING: CPU: 0 PID: 1 at fs/proc/generic.c:682 remove_proc_entry+0x198/0x1c0
[    1.522403] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.0-s3k-dev-02248-g93532430a4ff #2564
[    1.530724] NIP:  c0197694 LR: c0197694 CTR: c0050d80
[    1.535762] REGS: df4a5af0 TRAP: 0700   Not tainted  (5.4.0-02248-g93532430a4ff)
[    1.543818] MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 22028222  XER: 00000000
[    1.550524]
[    1.550524] GPR00: c0197694 df4a5ba8 df4a0000 00000054 00000000 00000000 00004a38 00000010
[    1.550524] GPR08: c07c5a30 00000800 00000000 00001032 22000208 00000000 c0004b14 00000000
[    1.550524] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0830000 c07fc078
[    1.550524] GPR24: c08e8ca0 df665d10 df60ea98 c07c9db8 00000001 df5d5ae3 df5d5a80 df43f8e3
[    1.585327] NIP [c0197694] remove_proc_entry+0x198/0x1c0
[    1.590628] LR [c0197694] remove_proc_entry+0x198/0x1c0
[    1.595829] Call Trace:
[    1.598280] [df4a5ba8] [c0197694] remove_proc_entry+0x198/0x1c0 (unreliable)
[    1.605321] [df4a5bd8] [c0067acc] unregister_irq_proc+0x5c/0x70
[    1.611238] [df4a5bf8] [c005fbc4] free_desc+0x3c/0x80
[    1.616286] [df4a5c18] [c005fe2c] irq_free_descs+0x70/0xa8
[    1.621778] [df4a5c38] [c033d3fc] of_fsl_spi_probe+0xdc/0x3cc
[    1.627525] [df4a5c88] [c02f0f64] platform_drv_probe+0x44/0xa4
[    1.633350] [df4a5c98] [c02eee44] really_probe+0x1ac/0x418
[    1.638829] [df4a5cc8] [c02ed3e8] bus_for_each_drv+0x64/0xb0
[    1.644481] [df4a5cf8] [c02ef950] __device_attach+0xd4/0x128
[    1.650132] [df4a5d28] [c02ed61c] bus_probe_device+0xa0/0xbc
[    1.655783] [df4a5d48] [c02ebbe8] device_add+0x544/0x74c
[    1.661096] [df4a5d88] [c0382b78] of_platform_device_create_pdata+0xa4/0x100
[    1.668131] [df4a5da8] [c0382cf4] of_platform_bus_create+0x120/0x20c
[    1.674474] [df4a5df8] [c0382d50] of_platform_bus_create+0x17c/0x20c
[    1.680818] [df4a5e48] [c0382e88] of_platform_bus_probe+0x9c/0xf0
[    1.686907] [df4a5e68] [c0751404] __machine_initcall_cmpcpro_cmpcpro_declare_of_platform_devices+0x74/0x1a4
[    1.696629] [df4a5e98] [c072a4cc] do_one_initcall+0x8c/0x1d4
[    1.702282] [df4a5ef8] [c072a768] kernel_init_freeable+0x154/0x204
[    1.708455] [df4a5f28] [c0004b2c] kernel_init+0x18/0x110
[    1.713769] [df4a5f38] [c00122ac] ret_from_kernel_thread+0x14/0x1c
[    1.719926] Instruction dump:
[    1.722889] 2c030000 4182004c 3863ffb0 3c80c05f 80e3005c 388436a0 3c60c06d 7fa6eb78
[    1.730630] 7fe5fb78 38840280 38634178 4be8c611 <0fe00000> 4bffff6c 3c60c071 7fe4fb78
[    1.738556] ---[ end trace 05d0720bf2e352e2 ]---

The problem comes from the error path which calls
irq_dispose_mapping() while the IRQ has been requested with
devm_request_irq().

IRQ doesn't need to be mapped with irq_of_parse_and_map(). The only
need is to get the IRQ virtual number. For that, use
of_irq_to_resource() instead of the
irq_of_parse_and_map()/irq_dispose_mapping() pair.

Fixes: 500a32abaf81 ("spi: fsl: Call irq_dispose_mapping in err path")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/518cfb83347d5372748e7fe72f94e2e9443d0d4a.1575905123.git.christophe.leroy@c-s.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: Fix error path of vhci_recv_ret_submit()

commit aabb5b833872524eaf28f52187e5987984982264 upstream.

If a transaction error happens in vhci_recv_ret_submit(), event
handler closes connection and changes port status to kick hub_event.
Then hub tries to flush the endpoint URBs, but that causes infinite
loop between usb_hub_flush_endpoint() and vhci_urb_dequeue() because
"vhci_priv" in vhci_urb_dequeue() was already released by
vhci_recv_ret_submit() before a transmission error occurred. Thus,
vhci_urb_dequeue() terminates early and usb_hub_flush_endpoint()
continuously calls vhci_urb_dequeue().

The root cause of this issue is that vhci_recv_ret_submit()
terminates early without giving back URB when transaction error
occurs in vhci_recv_ret_submit(). That causes the error URB to still
be linked at endpoint list without “vhci_priv".

So, in the case of transaction error in vhci_recv_ret_submit(),
unlink URB from the endpoint, insert proper error code in
urb->status and give back URB.

Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20191213023055.19933-3-suwan.kim027@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: Fix receive error in vhci-hcd when using scatter-gather

commit d986294ee55d719562b20aabe15a39bf8f863415 upstream.

When vhci uses SG and receives data whose size is smaller than SG
buffer size, it tries to receive more data even if it acutally
receives all the data from the server. If then, it erroneously adds
error event and triggers connection shutdown.

vhci-hcd should check if it received all the data even if there are
more SG entries left. So, check if it receivces all the data from
the server in for_each_sg() loop.

Fixes: ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213023055.19933-2-suwan.kim027@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: flexcan: add low power enter/exit acknowledgment helper

[ Upstream commit b7603d080ffcf8689ec91ca300caf84d8dbed317 ]

The MCR[LPMACK] read-only bit indicates that FlexCAN is in a lower-power
mode (Disabled mode, Doze mode, Stop mode).

The CPU can poll this bit to know when FlexCAN has actually entered low
power mode. The low power enter/exit acknowledgment helper will reduce
code duplication for disabled mode, doze mode and stop mode.

Tested-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs

[ Upstream commit ddb52945999dcf35787bf221b62108806182578d ]

In addition to using vcsi regulator for the display, looks like droid4 is
using vcsi regulator to trigger off mode internally with the PMIC firmware
when the SoC enters deeper idle states. This is configured in the Motorola
Mapphone Linux kernel sources as "zerov_regulator".

As we currently don't support off mode during idle for omap4, we must
prevent vcsi from being disabled when the display is blanked to prevent
the PMIC change to off mode. Otherwise the device will hang on entering
idle when the display is blanked.

Before commit 089b3f61ecfc ("regulator: core: Let boot-on regulators be
powered off"), the boot-on regulators never got disabled like they should
and vcsi did not get turned off on idle.

Let's fix the issue by setting vcsi to always-on for now. Later on we may
want to claim the vcsi regulator also in the PM code if needed.

Fixes: 089b3f61ecfc ("regulator: core: Let boot-on regulators be powered off")
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/ftrace: fix endless recursion in function_graph tracer

[ Upstream commit 6feeee8efc53035c3195b02068b58ae947538aa4 ]

The following sequence triggers a kernel stack overflow on s390x:

mount -t tracefs tracefs /sys/kernel/tracing
cd /sys/kernel/tracing
echo function_graph > current_tracer
[crash]

This is because preempt_count_{add,sub} are in the list of traced
functions, which can be demonstrated by:

echo preempt_count_add >set_ftrace_filter
echo function_graph > current_tracer
[crash]

The stack overflow happens because get_tod_clock_monotonic() gets called
by ftrace but itself calls preempt_{disable,enable}(), which leads to a
endless recursion. Fix this by using preempt_{disable,enable}_notrace().

Fixes: 011620688a71 ("s390/time: ensure get_clock_monotonic() returns monotonic values")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: avoid invalid memory access for array sb->dev_roles

[ Upstream commit 228fc7d76db68732677230a3c64337908fd298e3 ]

we need to gurantee 'desc_nr' valid before access array
of sb->dev_roles.

In addition, we should avoid .load_super always return '0'
when level is LEVEL_MULTIPATH, which is not expected.

Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1487373 ("Memory - illegal accesses")
Fixes: 6a5cb53aaa4e ("md: no longer compare spare disk superblock events in super_load")
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Fix post_recv QP state locking

[ Upstream commit 0edefddbae396e50eb7887d279d0c4bb4d7a6384 ]

Do not release qp state lock if not previously acquired.

Fixes: cf049bb31f71 ("RDMA/siw: Fix SQ/RQ drain logic")
Link: https://lore.kernel.org/r/20191025142903.20625-1-bmt@zurich.ibm.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Revert "ath10k: add cleanup in ath10k_sta_state()"

[ Upstream commit f4fe2e53349f1072d33c69f484dbf9d77bb8f45a ]

This reverts commit 334f5b61a6f29834e881923b98d1e27e5ce9620d.

This caused ath10k_snoc on Qualcomm MSM8998, SDM845 and QCS404 platforms to
trigger an assert in the firmware:

err_qdi.c:456:EF:wlan_process:1:cmnos_thread.c:3900:Asserted in wlan_vdev.c:_wlan_vdev_up:3219

Revert the offending commit for now.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix uninitialized variable pasid_mapping_needed

[ Upstream commit 17cf678a33c6196a3df4531fe5aec91384c9eeb5 ]

The boolean variable pasid_mapping_needed is not initialized and
there are code paths that do not assign it any value before it is
is read later.  Fix this by initializing pasid_mapping_needed to
false.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 6817bf283b2b ("drm/amdgpu: grab the id mgr lock while accessing passid_mapping")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: xhci: Fix build warning seen with CONFIG_PM=n

[ Upstream commit 6056a0f8ede27b296d10ef46f7f677cc9d715371 ]

The following build warning is seen if CONFIG_PM is disabled.

drivers/usb/host/xhci-pci.c:498:13: warning:
unused function 'xhci_pci_shutdown'

Fixes: f2c710f7dca8 ("usb: xhci: only set D3hot for pci device")
Cc: Henry Lin <henryl@nvidia.com>
Cc: stable@vger.kernel.org # all stable releases with f2c710f7dca8
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191218011911.6907-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: cadence: Correct handling of native chipselect

[ Upstream commit 61acd19f9c56fa0809285346bd0bd4a926ab0da0 ]

To fix a regression on the Cadence SPI driver, this patch reverts
commit 6046f5407ff0 ("spi: cadence: Fix default polarity of native
chipselect").

This patch was not the correct fix for the issue. The SPI framework
calls the set_cs line with the logic level it desires on the chip select
line, as such the old is_high handling was correct. However, this was
broken by the fact that before commit 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH
setting when using native and GPIO CS") all controllers that offered
the use of a GPIO chip select had SPI_CS_HIGH applied, even for hardware
chip selects. This caused the value passed into the driver to be inverted.
Which unfortunately makes it look like a logical enable the chip select
value.

Since the core was corrected to not unconditionally apply SPI_CS_HIGH,
the Cadence driver, whilst using the hardware chip select, will deselect
the chip select every time we attempt to communicate with the device,
which results in failed communications.

Fixes: 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191126164140.6240-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: dw: Correct handling of native chipselect

[ Upstream commit ada9e3fcc175db4538f5b5e05abf5dedf626e550 ]

This patch reverts commit 6e0a32d6f376 ("spi: dw: Fix default polarity
of native chipselect").

The SPI framework always called the set_cs callback with the logic
level it desired on the chip select line, which is what the drivers
original handling supported. commit f3186dd87669 ("spi: Optionally
use GPIO descriptors for CS GPIOs") changed these symantics, but only
in the case of drivers that also support GPIO chip selects, to true
meaning apply slave select rather than logic high. This left things in
an odd state where a driver that only supports hardware chip selects,
the core would handle polarity but if the driver supported GPIOs as
well the driver should handle polarity.  At this point the reverted
change was applied to change the logic in the driver to match new
system.

This was then broken by commit 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH
setting when using native and GPIO CS") which reverted the core back
to consistently calling set_cs with a logic level.

This fix reverts the driver code back to its original state to match
the current core code. This is probably a better fix as a) the set_cs
callback is always called with consistent symantics and b) the
inversion for SPI_CS_HIGH can be handled in the core and doesn't need
to be coded in each driver supporting it.

Fixes: 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191127153936.29719-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: tls: remove recv_rcvbuf test

[ Upstream commit 6dd504b0fd1039c6e5d391e97cf5c4ee592aefcb ]

This test only works when [1] is applied, which was rejected.

Basically, the errors are reported and cleared. In this particular case of
tls sockets, following reads will block.

The test case was originally submitted with the rejected patch, but, then,
was included as part of a different patchset, possibly by mistake.

[1] https://lore.kernel.org/netdev/20191007035323.4360-2-jakub.kicinski@netronome.com/#t

Thanks Paolo Pisati for pointing out the original patchset where this
appeared.

Fixes: 65190f77424d (selftests/tls: add a test for fragmented messages)
Reported-by: Paolo Pisati <paolo.pisati@canonical.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: kvaser_usb: kvaser_usb_leaf: Fix some info-leaks to USB devices

commit da2311a6385c3b499da2ed5d9be59ce331fa93e9 upstream.

Uninitialized Kernel memory can leak to USB devices.

Fix this by using kzalloc() instead of kmalloc().

Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Fixes: 7259124eac7d ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c")
Cc: linux-stable <stable@vger.kernel.org> # >= v4.19
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>