tomoyo: Don't use nifty names on sockets.

commit 6f7c41374b62fd80bbd8aae3536c43688c54d95e upstream.

syzbot is reporting that use of SOCKET_I()->sk from open() can result in
use after free problem [1], for socket's inode is still reachable via
/proc/pid/fd/n despite destruction of SOCKET_I()->sk already completed.

At first I thought that this race condition applies to only open/getattr
permission checks. But James Morris has pointed out that there are more
permission checks where this race condition applies to. Thus, get rid of
tomoyo_get_socket_name() instead of conditionally bypassing permission
checks on sockets. As a side effect of this patch,
"socket:[family=\$:type=\$:protocol=\$]" in the policy files has to be
rewritten to "socket:[\$]".

[1] https://syzkaller.appspot.com/bug?id=73d590010454403d55164cca23bd0565b1eb3b74

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+0341f6a4d729d4e0acf1@syzkaller.appspotmail.com>
Reported-by: James Morris <jmorris@namei.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hrtimer: Annotate lockless access to timer->state

commit 56144737e67329c9aaed15f942d46a6302e2e3d8 upstream.

syzbot reported various data-race caused by hrtimer_is_queued() reading
timer->state. A READ_ONCE() is required there to silence the warning.

Also add the corresponding WRITE_ONCE() when timer->state is set.

In remove_hrtimer() the hrtimer_is_queued() helper is open coded to avoid
loading timer->state twice.

KCSAN reported these cases:

BUG: KCSAN: data-race in __remove_hrtimer / tcp_pacing_check

write to 0xffff8880b2a7d388 of 1 bytes by interrupt on cpu 0:
 __remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991
 __run_hrtimer kernel/time/hrtimer.c:1496 [inline]
 __hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576
 hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 run_ksoftirqd+0x46/0x60 kernel/softirq.c:603
 smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

read to 0xffff8880b2a7d388 of 1 bytes by task 24652 on cpu 1:
 tcp_pacing_check net/ipv4/tcp_output.c:2235 [inline]
 tcp_pacing_check+0xba/0x130 net/ipv4/tcp_output.c:2225
 tcp_xmit_retransmit_queue+0x32c/0x5a0 net/ipv4/tcp_output.c:3044
 tcp_xmit_recovery+0x7c/0x120 net/ipv4/tcp_input.c:3558
 tcp_ack+0x17b6/0x3170 net/ipv4/tcp_input.c:3717
 tcp_rcv_established+0x37e/0xf50 net/ipv4/tcp_input.c:5696
 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561
 sk_backlog_rcv include/net/sock.h:945 [inline]
 __release_sock+0x135/0x1e0 net/core/sock.c:2435
 release_sock+0x61/0x160 net/core/sock.c:2951
 sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145
 tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393
 tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434
 inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0x9f/0xc0 net/socket.c:657

BUG: KCSAN: data-race in __remove_hrtimer / __tcp_ack_snd_check

write to 0xffff8880a3a65588 of 1 bytes by interrupt on cpu 0:
 __remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991
 __run_hrtimer kernel/time/hrtimer.c:1496 [inline]
 __hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576
 hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0xbb/0xe0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830

read to 0xffff8880a3a65588 of 1 bytes by task 22891 on cpu 1:
 __tcp_ack_snd_check+0x415/0x4f0 net/ipv4/tcp_input.c:5265
 tcp_ack_snd_check net/ipv4/tcp_input.c:5287 [inline]
 tcp_rcv_established+0x750/0xf50 net/ipv4/tcp_input.c:5708
 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561
 sk_backlog_rcv include/net/sock.h:945 [inline]
 __release_sock+0x135/0x1e0 net/core/sock.c:2435
 release_sock+0x61/0x160 net/core/sock.c:2951
 sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145
 tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393
 tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434
 inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0x9f/0xc0 net/socket.c:657
 __sys_sendto+0x21f/0x320 net/socket.c:1952
 __do_sys_sendto net/socket.c:1964 [inline]
 __se_sys_sendto net/socket.c:1960 [inline]
 __x64_sys_sendto+0x89/0xb0 net/socket.c:1960
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 24652 Comm: syz-executor.3 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

[ tglx: Added comments ]

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191106174804.74723-1-edumazet@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: icmp: fix data-race in cmp_global_allow()

commit bbab7ef235031f6733b5429ae7877bfa22339712 upstream.

This code reads two global variables without protection
of a lock. We need READ_ONCE()/WRITE_ONCE() pairs to
avoid load/store-tearing and better document the intent.

KCSAN reported :
BUG: KCSAN: data-race in icmp_global_allow / icmp_global_allow

read to 0xffffffff861a8014 of 4 bytes by task 11201 on cpu 0:
 icmp_global_allow+0x36/0x1b0 net/ipv4/icmp.c:254
 icmpv6_global_allow net/ipv6/icmp.c:184 [inline]
 icmpv6_global_allow net/ipv6/icmp.c:179 [inline]
 icmp6_send+0x493/0x1140 net/ipv6/icmp.c:514
 icmpv6_send+0x71/0xb0 net/ipv6/ip6_icmp.c:43
 ip6_link_failure+0x43/0x180 net/ipv6/route.c:2640
 dst_link_failure include/net/dst.h:419 [inline]
 vti_xmit net/ipv4/ip_vti.c:243 [inline]
 vti_tunnel_xmit+0x27f/0xa50 net/ipv4/ip_vti.c:279
 __netdev_start_xmit include/linux/netdevice.h:4420 [inline]
 netdev_start_xmit include/linux/netdevice.h:4434 [inline]
 xmit_one net/core/dev.c:3280 [inline]
 dev_hard_start_xmit+0xef/0x430 net/core/dev.c:3296
 __dev_queue_xmit+0x14c9/0x1b60 net/core/dev.c:3873
 dev_queue_xmit+0x21/0x30 net/core/dev.c:3906
 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530
 neigh_output include/net/neighbour.h:511 [inline]
 ip6_finish_output2+0x7a6/0xec0 net/ipv6/ip6_output.c:116
 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
 __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175
 dst_output include/net/dst.h:436 [inline]
 ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179

write to 0xffffffff861a8014 of 4 bytes by task 11183 on cpu 1:
 icmp_global_allow+0x174/0x1b0 net/ipv4/icmp.c:272
 icmpv6_global_allow net/ipv6/icmp.c:184 [inline]
 icmpv6_global_allow net/ipv6/icmp.c:179 [inline]
 icmp6_send+0x493/0x1140 net/ipv6/icmp.c:514
 icmpv6_send+0x71/0xb0 net/ipv6/ip6_icmp.c:43
 ip6_link_failure+0x43/0x180 net/ipv6/route.c:2640
 dst_link_failure include/net/dst.h:419 [inline]
 vti_xmit net/ipv4/ip_vti.c:243 [inline]
 vti_tunnel_xmit+0x27f/0xa50 net/ipv4/ip_vti.c:279
 __netdev_start_xmit include/linux/netdevice.h:4420 [inline]
 netdev_start_xmit include/linux/netdevice.h:4434 [inline]
 xmit_one net/core/dev.c:3280 [inline]
 dev_hard_start_xmit+0xef/0x430 net/core/dev.c:3296
 __dev_queue_xmit+0x14c9/0x1b60 net/core/dev.c:3873
 dev_queue_xmit+0x21/0x30 net/core/dev.c:3906
 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530
 neigh_output include/net/neighbour.h:511 [inline]
 ip6_finish_output2+0x7a6/0xec0 net/ipv6/ip6_output.c:116
 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
 __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 11183 Comm: syz-executor.2 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 4cdf507d5452 ("icmp: add a global rate limitation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: add a READ_ONCE() in skb_peek_tail()

commit f8cc62ca3e660ae3fdaee533b1d554297cd2ae82 upstream.

skb_peek_tail() can be used without protection of a lock,
as spotted by KCSAN [1]

In order to avoid load-stearing, add a READ_ONCE()

Note that the corresponding WRITE_ONCE() are already there.

[1]
BUG: KCSAN: data-race in sk_wait_data / skb_queue_tail

read to 0xffff8880b36a4118 of 8 bytes by task 20426 on cpu 1:
 skb_peek_tail include/linux/skbuff.h:1784 [inline]
 sk_wait_data+0x15b/0x250 net/core/sock.c:2477
 kcm_wait_data+0x112/0x1f0 net/kcm/kcmsock.c:1103
 kcm_recvmsg+0xac/0x320 net/kcm/kcmsock.c:1130
 sock_recvmsg_nosec net/socket.c:871 [inline]
 sock_recvmsg net/socket.c:889 [inline]
 sock_recvmsg+0x92/0xb0 net/socket.c:885
 ___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
 do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
 __sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
 __do_sys_recvmmsg net/socket.c:2703 [inline]
 __se_sys_recvmmsg net/socket.c:2696 [inline]
 __x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

write to 0xffff8880b36a4118 of 8 bytes by task 451 on cpu 0:
 __skb_insert include/linux/skbuff.h:1852 [inline]
 __skb_queue_before include/linux/skbuff.h:1958 [inline]
 __skb_queue_tail include/linux/skbuff.h:1991 [inline]
 skb_queue_tail+0x7e/0xc0 net/core/skbuff.c:3145
 kcm_queue_rcv_skb+0x202/0x310 net/kcm/kcmsock.c:206
 kcm_rcv_strparser+0x74/0x4b0 net/kcm/kcmsock.c:370
 __strp_recv+0x348/0xf50 net/strparser/strparser.c:309
 strp_recv+0x84/0xa0 net/strparser/strparser.c:343
 tcp_read_sock+0x174/0x5c0 net/ipv4/tcp.c:1639
 strp_read_sock+0xd4/0x140 net/strparser/strparser.c:366
 do_strp_work net/strparser/strparser.c:414 [inline]
 strp_work+0x9a/0xe0 net/strparser/strparser.c:423
 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
 worker_thread+0xa0/0x800 kernel/workqueue.c:2415
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 451 Comm: kworker/u4:3 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: kstrp strp_work

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inetpeer: fix data-race in inet_putpeer / inet_putpeer

commit 71685eb4ce80ae9c49eff82ca4dd15acab215de9 upstream.

We need to explicitely forbid read/store tearing in inet_peer_gc()
and inet_putpeer().

The following syzbot report reminds us about inet_putpeer()
running without a lock held.

BUG: KCSAN: data-race in inet_putpeer / inet_putpeer

write to 0xffff888121fb2ed0 of 4 bytes by interrupt on cpu 0:
 inet_putpeer+0x37/0xa0 net/ipv4/inetpeer.c:240
 ip4_frag_free+0x3d/0x50 net/ipv4/ip_fragment.c:102
 inet_frag_destroy_rcu+0x58/0x80 net/ipv4/inet_fragment.c:228
 __rcu_reclaim kernel/rcu/rcu.h:222 [inline]
 rcu_do_batch+0x256/0x5b0 kernel/rcu/tree.c:2157
 rcu_core+0x369/0x4d0 kernel/rcu/tree.c:2377
 rcu_core_si+0x12/0x20 kernel/rcu/tree.c:2386
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0xbb/0xe0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
 native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71
 arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571
 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94
 cpuidle_idle_call kernel/sched/idle.c:154 [inline]
 do_idle+0x1af/0x280 kernel/sched/idle.c:263

write to 0xffff888121fb2ed0 of 4 bytes by interrupt on cpu 1:
 inet_putpeer+0x37/0xa0 net/ipv4/inetpeer.c:240
 ip4_frag_free+0x3d/0x50 net/ipv4/ip_fragment.c:102
 inet_frag_destroy_rcu+0x58/0x80 net/ipv4/inet_fragment.c:228
 __rcu_reclaim kernel/rcu/rcu.h:222 [inline]
 rcu_do_batch+0x256/0x5b0 kernel/rcu/tree.c:2157
 rcu_core+0x369/0x4d0 kernel/rcu/tree.c:2377
 rcu_core_si+0x12/0x20 kernel/rcu/tree.c:2386
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 run_ksoftirqd+0x46/0x60 kernel/softirq.c:603
 smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 4b9d9be839fd ("inetpeer: remove unused list")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: bridge: make sure to pull arp header in br_nf_forward_arp()

commit 5604285839aaedfb23ebe297799c6e558939334d upstream.

syzbot is kind enough to remind us we need to call skb_may_pull()

BUG: KMSAN: uninit-value in br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665
CPU: 1 PID: 11631 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
 __msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245
 br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665
 nf_hook_entry_hookfn include/linux/netfilter.h:135 [inline]
 nf_hook_slow+0x18b/0x3f0 net/netfilter/core.c:512
 nf_hook include/linux/netfilter.h:260 [inline]
 NF_HOOK include/linux/netfilter.h:303 [inline]
 __br_forward+0x78f/0xe30 net/bridge/br_forward.c:109
 br_flood+0xef0/0xfe0 net/bridge/br_forward.c:234
 br_handle_frame_finish+0x1a77/0x1c20 net/bridge/br_input.c:162
 nf_hook_bridge_pre net/bridge/br_input.c:245 [inline]
 br_handle_frame+0xfb6/0x1eb0 net/bridge/br_input.c:348
 __netif_receive_skb_core+0x20b9/0x51a0 net/core/dev.c:4830
 __netif_receive_skb_one_core net/core/dev.c:4927 [inline]
 __netif_receive_skb net/core/dev.c:5043 [inline]
 process_backlog+0x610/0x13c0 net/core/dev.c:5874
 napi_poll net/core/dev.c:6311 [inline]
 net_rx_action+0x7a6/0x1aa0 net/core/dev.c:6379
 __do_softirq+0x4a1/0x83a kernel/softirq.c:293
 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1091
 </IRQ>
 do_softirq kernel/softirq.c:338 [inline]
 __local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:190
 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
 rcu_read_unlock_bh include/linux/rcupdate.h:688 [inline]
 __dev_queue_xmit+0x38e8/0x4200 net/core/dev.c:3819
 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3825
 packet_snd net/packet/af_packet.c:2959 [inline]
 packet_sendmsg+0x8234/0x9100 net/packet/af_packet.c:2984
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg net/socket.c:657 [inline]
 __sys_sendto+0xc44/0xc70 net/socket.c:1952
 __do_sys_sendto net/socket.c:1964 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:1960
 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960
 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45a679
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f0a3c9e5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 000000000045a679
RDX: 000000000000000e RSI: 0000000020000200 RDI: 0000000000000003
RBP: 000000000075bf20 R08: 00000000200000c0 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f0a3c9e66d4
R13: 00000000004c8ec1 R14: 00000000004dfe28 R15: 00000000ffffffff

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline]
 kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132
 kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86
 slab_alloc_node mm/slub.c:2773 [inline]
 __kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381
 __kmalloc_reserve net/core/skbuff.c:141 [inline]
 __alloc_skb+0x306/0xa10 net/core/skbuff.c:209
 alloc_skb include/linux/skbuff.h:1049 [inline]
 alloc_skb_with_frags+0x18c/0xa80 net/core/skbuff.c:5662
 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2244
 packet_alloc_skb net/packet/af_packet.c:2807 [inline]
 packet_snd net/packet/af_packet.c:2902 [inline]
 packet_sendmsg+0x63a6/0x9100 net/packet/af_packet.c:2984
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg net/socket.c:657 [inline]
 __sys_sendto+0xc44/0xc70 net/socket.c:1952
 __do_sys_sendto net/socket.c:1964 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:1960
 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960
 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c4e70a87d975 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/smc: add fallback check to connect()

commit 86434744fedf0cfe07a9eee3f4632c0e25c1d136 upstream.

FASTOPEN setsockopt() or sendmsg() may switch the SMC socket to fallback
mode. Once fallback mode is active, the native TCP socket functions are
called. Nevertheless there is a small race window, when FASTOPEN
setsockopt/sendmsg runs in parallel to a connect(), and switch the
socket into fallback mode before connect() takes the sock lock.
Make sure the SMC-specific connect setup is omitted in this case.

This way a syzbot-reported refcount problem is fixed, triggered by
different threads running non-blocking connect() and FASTOPEN_KEY
setsockopt.

Reported-by: syzbot+96d3f9ff6a86d37e44c8@syzkaller.appspotmail.com
Fixes: 6d6dd528d5af ("net/smc: fix refcount non-blocking connect() -part 2")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Fix __clear_user() with KUAP enabled

commit 61e3acd8c693a14fc69b824cb5b08d02cb90a6e7 upstream.

The KUAP implementation adds calls in clear_user() to enable and
disable access to userspace memory. However, it doesn't add these to
__clear_user(), which is used in the ptrace regset code.

As there's only one direct user of __clear_user() (the regset code),
and the time taken to set the AMR for KUAP purposes is going to
dominate the cost of a quick access_ok(), there's not much point
having a separate path.

Rename __clear_user() to __arch_clear_user(), and make __clear_user()
just call clear_user().

Reported-by: syzbot+f25ecf4b2982d8c7a640@syzkaller-ppc64.appspotmail.com
Reported-by: Daniel Axtens <dja@axtens.net>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Use __arch_clear_user() for the asm version like arm64 & nds32]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191209132221.15328-1-ajd@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6pack,mkiss: fix possible deadlock

commit 5c9934b6767b16ba60be22ec3cbd4379ad64170d upstream.

We got another syzbot report [1] that tells us we must use
write_lock_irq()/write_unlock_irq() to avoid possible deadlock.

[1]

WARNING: inconsistent lock state
5.5.0-rc1-syzkaller #0 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-R} usage.
syz-executor826/9605 [HC1[1]:SC0[0]:HE0:SE1] takes:
ffffffff8a128718 (disc_data_lock){+-..}, at: sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138
{HARDIRQ-ON-W} state was registered at:
  lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
  __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
  _raw_write_lock_bh+0x33/0x50 kernel/locking/spinlock.c:319
  sixpack_close+0x1d/0x250 drivers/net/hamradio/6pack.c:657
  tty_ldisc_close.isra.0+0x119/0x1a0 drivers/tty/tty_ldisc.c:489
  tty_set_ldisc+0x230/0x6b0 drivers/tty/tty_ldisc.c:585
  tiocsetd drivers/tty/tty_io.c:2337 [inline]
  tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2597
  vfs_ioctl fs/ioctl.c:47 [inline]
  file_ioctl fs/ioctl.c:545 [inline]
  do_vfs_ioctl+0x977/0x14e0 fs/ioctl.c:732
  ksys_ioctl+0xab/0xd0 fs/ioctl.c:749
  __do_sys_ioctl fs/ioctl.c:756 [inline]
  __se_sys_ioctl fs/ioctl.c:754 [inline]
  __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:754
  do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
irq event stamp: 3946
hardirqs last  enabled at (3945): [<ffffffff87c86e43>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:168 [inline]
hardirqs last  enabled at (3945): [<ffffffff87c86e43>] _raw_spin_unlock_irq+0x23/0x80 kernel/locking/spinlock.c:199
hardirqs last disabled at (3946): [<ffffffff8100675f>] trace_hardirqs_off_thunk+0x1a/0x1c arch/x86/entry/thunk_64.S:42
softirqs last  enabled at (2658): [<ffffffff86a8b4df>] spin_unlock_bh include/linux/spinlock.h:383 [inline]
softirqs last  enabled at (2658): [<ffffffff86a8b4df>] clusterip_netdev_event+0x46f/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:222
softirqs last disabled at (2656): [<ffffffff86a8b22b>] spin_lock_bh include/linux/spinlock.h:343 [inline]
softirqs last disabled at (2656): [<ffffffff86a8b22b>] clusterip_netdev_event+0x1bb/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:196

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(disc_data_lock);
  <Interrupt>
    lock(disc_data_lock);

 *** DEADLOCK ***

5 locks held by syz-executor826/9605:
 #0: ffff8880a905e198 (&tty->legacy_mutex){+.+.}, at: tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19
 #1: ffffffff899a56c0 (rcu_read_lock){....}, at: mutex_spin_on_owner+0x0/0x330 kernel/locking/mutex.c:413
 #2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: spin_lock include/linux/spinlock.h:338 [inline]
 #2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: serial8250_interrupt+0x2d/0x1a0 drivers/tty/serial/8250/8250_core.c:116
 #3: ffffffff8c104048 (&port_lock_key){-.-.}, at: serial8250_handle_irq.part.0+0x24/0x330 drivers/tty/serial/8250/8250_port.c:1823
 #4: ffff8880a905e090 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref+0x22/0x90 drivers/tty/tty_ldisc.c:288

stack backtrace:
CPU: 1 PID: 9605 Comm: syz-executor826 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_usage_bug.cold+0x327/0x378 kernel/locking/lockdep.c:3101
 valid_state kernel/locking/lockdep.c:3112 [inline]
 mark_lock_irq kernel/locking/lockdep.c:3309 [inline]
 mark_lock+0xbb4/0x1220 kernel/locking/lockdep.c:3666
 mark_usage kernel/locking/lockdep.c:3554 [inline]
 __lock_acquire+0x1e55/0x4a00 kernel/locking/lockdep.c:3909
 lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
 __raw_read_lock include/linux/rwlock_api_smp.h:149 [inline]
 _raw_read_lock+0x32/0x50 kernel/locking/spinlock.c:223
 sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138
 sixpack_write_wakeup+0x25/0x340 drivers/net/hamradio/6pack.c:402
 tty_wakeup+0xe9/0x120 drivers/tty/tty_io.c:536
 tty_port_default_wakeup+0x2b/0x40 drivers/tty/tty_port.c:50
 tty_port_tty_wakeup+0x57/0x70 drivers/tty/tty_port.c:387
 uart_write_wakeup+0x46/0x70 drivers/tty/serial/serial_core.c:104
 serial8250_tx_chars+0x495/0xaf0 drivers/tty/serial/8250/8250_port.c:1761
 serial8250_handle_irq.part.0+0x2a2/0x330 drivers/tty/serial/8250/8250_port.c:1834
 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1820 [inline]
 serial8250_default_handle_irq+0xc0/0x150 drivers/tty/serial/8250/8250_port.c:1850
 serial8250_interrupt+0xf1/0x1a0 drivers/tty/serial/8250/8250_core.c:126
 __handle_irq_event_percpu+0x15d/0x970 kernel/irq/handle.c:149
 handle_irq_event_percpu+0x74/0x160 kernel/irq/handle.c:189
 handle_irq_event+0xa7/0x134 kernel/irq/handle.c:206
 handle_edge_irq+0x25e/0x8d0 kernel/irq/chip.c:830
 generic_handle_irq_desc include/linux/irqdesc.h:156 [inline]
 do_IRQ+0xde/0x280 arch/x86/kernel/irq.c:250
 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:607
 </IRQ>
RIP: 0010:cpu_relax arch/x86/include/asm/processor.h:685 [inline]
RIP: 0010:mutex_spin_on_owner+0x247/0x330 kernel/locking/mutex.c:579
Code: c3 be 08 00 00 00 4c 89 e7 e8 e5 06 59 00 4c 89 e0 48 c1 e8 03 42 80 3c 38 00 0f 85 e1 00 00 00 49 8b 04 24 a8 01 75 96 f3 90 <e9> 2f fe ff ff 0f 0b e8 0d 19 09 00 84 c0 0f 85 ff fd ff ff 48 c7
RSP: 0018:ffffc90001eafa20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffd7
RAX: 0000000000000000 RBX: ffff88809fd9e0c0 RCX: 1ffffffff13266dd
RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000000
RBP: ffffc90001eafa60 R08: 1ffff11013d22898 R09: ffffed1013d22899
R10: ffffed1013d22898 R11: ffff88809e9144c7 R12: ffff8880a905e138
R13: ffff88809e9144c0 R14: 0000000000000000 R15: dffffc0000000000
 mutex_optimistic_spin kernel/locking/mutex.c:673 [inline]
 __mutex_lock_common kernel/locking/mutex.c:962 [inline]
 __mutex_lock+0x32b/0x13c0 kernel/locking/mutex.c:1106
 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1121
 tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19
 tty_release+0xb5/0xe90 drivers/tty/tty_io.c:1665
 __fput+0x2ff/0x890 fs/file_table.c:280
 ____fput+0x16/0x20 fs/file_table.c:313
 task_work_run+0x145/0x1c0 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x8e7/0x2ef0 kernel/exit.c:797
 do_group_exit+0x135/0x360 kernel/exit.c:895
 __do_sys_exit_group kernel/exit.c:906 [inline]
 __se_sys_exit_group kernel/exit.c:904 [inline]
 __x64_sys_exit_group+0x44/0x50 kernel/exit.c:904
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x43fef8
Code: Bad RIP value.
RSP: 002b:00007ffdb07d2338 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043fef8
RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000
RBP: 00000000004bf730 R08: 00000000000000e7 R09: ffffffffffffffd0
R10: 00000000004002c8 R11: 0000000000000246 R12: 0000000000000001
R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000

Fixes: 6e4e2f811bad ("6pack,mkiss: fix lock inconsistency")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ebtables: compat: reject all padding in matches/watchers

commit e608f631f0ba5f1fc5ee2e260a3a35d13107cbfe upstream.

syzbot reported following splat:

BUG: KASAN: vmalloc-out-of-bounds in size_entry_mwt net/bridge/netfilter/ebtables.c:2063 [inline]
BUG: KASAN: vmalloc-out-of-bounds in compat_copy_entries+0x128b/0x1380 net/bridge/netfilter/ebtables.c:2155
Read of size 4 at addr ffffc900004461f4 by task syz-executor267/7937

CPU: 1 PID: 7937 Comm: syz-executor267 Not tainted 5.5.0-rc1-syzkaller #0
 size_entry_mwt net/bridge/netfilter/ebtables.c:2063 [inline]
 compat_copy_entries+0x128b/0x1380 net/bridge/netfilter/ebtables.c:2155
 compat_do_replace+0x344/0x720 net/bridge/netfilter/ebtables.c:2249
 compat_do_ebt_set_ctl+0x22f/0x27e net/bridge/netfilter/ebtables.c:2333
 [..]

Because padding isn't considered during computation of ->buf_user_offset,
"total" is decremented by fewer bytes than it should.

Therefore, the first part of

if (*total < sizeof(*entry) || entry->next_offset < sizeof(*entry))

will pass, -- it should not have.  This causes oob access:
entry->next_offset is past the vmalloced size.

Reject padding and check that computed user offset (sum of ebt_entry
structure plus all individual matches/watchers/targets) is same
value that userspace gave us as the offset of the next entry.

Reported-by: syzbot+f68108fed972453a0ad4@syzkaller.appspotmail.com
Fixes: 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "iwlwifi: assign directly to iwl_trans->cfg in QuZ detection"

commit db5cce1afc8d2475d2c1c37c2a8267dd0e151526 upstream.

This reverts commit 968dcfb4905245dc64d65312c0d17692fa087b99.

Both that commit and commit 809805a820c6445f7a701ded24fdc6bbc841d1e4
attempted to fix the same bug (dead assignments to the local variable
cfg), but they did so in incompatible ways. When they were both merged,
independently of each other, the combination actually caused the bug to
reappear, leading to a firmware crash on boot for some cards.

https://bugzilla.kernel.org/show_bug.cgi?id=205719

Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: make sure desc_nr less than MD_SB_DISKS

[ Upstream commit 3b7436cc9449d5ff7fa1c1fd5bc3edb6402ff5b8 ]

For super_90_load, we need to make sure 'desc_nr' less
than MD_SB_DISKS, avoiding invalid memory access of 'sb->disks'.

Fixes: 228fc7d76db6 ("md: avoid invalid memory access for array sb->dev_roles")
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: fix err handling of stream initialization

[ Upstream commit 61d5d4062876e21331c3d0ba4b02dbd50c06a658 ]

The fix on 951c6db954a1 fixed the issued reported there but introduced
another. When the allocation fails within sctp_stream_init() it is
okay/necessary to free the genradix. But it is also called when adding
new streams, from sctp_send_add_streams() and
sctp_process_strreset_addstrm_in() and in those situations it cannot
just free the genradix because by then it is a fully operational
association.

The fix here then is to only free the genradix in sctp_stream_init()
and on those other call sites  move on with what it already had and let
the subsequent error handling to handle it.

Tested with the reproducers from this report and the previous one,
with lksctp-tools and sctp-tests.

Reported-by: syzbot+9a1bc632e78a1a98488b@syzkaller.appspotmail.com
Fixes: 951c6db954a1 ("sctp: fix memleak on err handling of stream initialization")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "powerpc/vcpu: Assume dedicated processors as non-preempt"

This reverts commit 8332dbe5157a0056d8ab409957dfa89930066d87 which is
commit 14c73bd344da60abaf7da3ea2e7733ddda35bbac upstream.

It breaks the build.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Parth Shah <parth@linux.ibm.com>
Cc: Ihor Pasichnyk <Ihor.Pasichnyk@ibm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Cc: Parth Shah <parth@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK

[ Upstream commit 3c1c24d91ffd536de0a64688a9df7f49e58fadbc ]

A while ago Andy noticed
(http://lkml.kernel.org/r/CALCETrWY+5ynDct7eU_nDUqx=okQvjm=Y5wJvA4ahBja=CQXGw@mail.gmail.com)
that UFFD_FEATURE_EVENT_FORK used by an unprivileged user may have
security implications.

As the first step of the solution the following patch limits the availably
of UFFD_FEATURE_EVENT_FORK only for those having CAP_SYS_PTRACE.

The usage of CAP_SYS_PTRACE ensures compatibility with CRIU.

Yet, if there are other users of non-cooperative userfaultfd that run
without CAP_SYS_PTRACE, they would be broken :(

Current implementation of UFFD_FEATURE_EVENT_FORK modifies the file
descriptor table from the read() implementation of uffd, which may have
security implications for unprivileged use of the userfaultfd.

Limit availability of UFFD_FEATURE_EVENT_FORK only for callers that have
CAP_SYS_PTRACE.

Link: http://lkml.kernel.org/r/1572967777-8812-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Daniel Colascione <dancol@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Nick Kralevich <nnk@google.com>
Cc: Nosh Minwalla <nosh@google.com>
Cc: Pavel Emelyanov <ovzxemul@gmail.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel: sysctl: make drop_caches write-only

[ Upstream commit 204cb79ad42f015312a5bbd7012d09c93d9b46fb ]

Currently, the drop_caches proc file and sysctl read back the last value
written, suggesting this is somehow a stateful setting instead of a
one-time command.  Make it write-only, like e.g.  compact_memory.

While mitigating a VM problem at scale in our fleet, there was confusion
about whether writing to this file will permanently switch the kernel into
a non-caching mode.  This influences the decision making in a tense
situation, where tens of people are trying to fix tens of thousands of
affected machines: Do we need a rollback strategy?  What are the
performance implications of operating in a non-caching state for several
days?  It also caused confusion when the kernel team said we may need to
write the file several times to make sure it's effective ("But it already
reads back 3?").

Link: http://lkml.kernel.org/r/20191031221602.9375-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/hugetlbfs: fix error handling when setting up mounts

[ Upstream commit 8fc312b32b25c6b0a8b46fab4df8c68df5af1223 ]

It is assumed that the hugetlbfs_vfsmount[] array will contain either a
valid vfsmount pointer or NULL for each hstate after initialization.
Changes made while converting to use fs_context broke this assumption.

While fixing the hugetlbfs_vfsmount issue, it was discovered that
init_hugetlbfs_fs never did correctly clean up when encountering a vfs
mount error.

It was found during code inspection.  A small memory allocation failure
would be the most likely cause of taking a error path with the bug.
This is unlikely to happen as this is early init code.

Link: http://lkml.kernel.org/r/94b6244d-2c24-e269-b12c-e3ba694b242d@oracle.com
Reported-by: Chengguang Xu <cgxu519@mykernel.net>
Fixes: 32021982a324 ("hugetlbfs: Convert to fs_context")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: vm: add fragment CONFIG_TEST_VMALLOC

[ Upstream commit 746dd4012d215b53152f0001a48856e41ea31730 ]

When running test_vmalloc.sh smoke the following print out states that
the fragment is missing.

 # ./test_vmalloc.sh: You must have the following enabled in your kernel:
 # CONFIG_TEST_VMALLOC=m

Rework to add the fragment 'CONFIG_TEST_VMALLOC=m' to the config file.

Link: http://lkml.kernel.org/r/20190916095217.19665-1-anders.roxell@linaro.org
Fixes: a05ef00c9790 ("selftests/vm: add script helper for CONFIG_TEST_VMALLOC_MODULE")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390: disable preemption when switching to nodat stack with CALL_ON_STACK

[ Upstream commit 7f28dad395243c5026d649136823bbc40029a828 ]

Make sure preemption is disabled when temporary switching to nodat
stack with CALL_ON_STACK helper, because nodat stack is per cpu.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mailbox: imx: Fix Tx doorbell shutdown path

[ Upstream commit bf159d151a0b844be28882f39e316b5800acaa2b ]

Tx doorbell is handled by txdb_tasklet and doesn't
have an associated IRQ.

Anyhow, imx_mu_shutdown ignores this and tries to
free an IRQ that wasn't requested for Tx DB resulting
in the following warning:

[    1.967644] Trying to free already-free IRQ 26
[    1.972108] WARNING: CPU: 2 PID: 157 at kernel/irq/manage.c:1708 __free_irq+0xc0/0x358
[    1.980024] Modules linked in:
[    1.983088] CPU: 2 PID: 157 Comm: kworker/2:1 Tainted: G
[    1.993524] Hardware name: Freescale i.MX8QXP MEK (DT)
[    1.998668] Workqueue: events deferred_probe_work_func
[    2.003812] pstate: 60000085 (nZCv daIf -PAN -UAO)
[    2.008607] pc : __free_irq+0xc0/0x358
[    2.012364] lr : __free_irq+0xc0/0x358
[    2.016111] sp : ffff00001179b7e0
[    2.019422] x29: ffff00001179b7e0 x28: 0000000000000018
[    2.024736] x27: ffff000011233000 x26: 0000000000000004
[    2.030053] x25: 000000000000001a x24: ffff80083bec74d4
[    2.035369] x23: 0000000000000000 x22: ffff80083bec7588
[    2.040686] x21: ffff80083b1fe8d8 x20: ffff80083bec7400
[    2.046003] x19: 0000000000000000 x18: ffffffffffffffff
[    2.051320] x17: 0000000000000000 x16: 0000000000000000
[    2.056637] x15: ffff0000111296c8 x14: ffff00009179b517
[    2.061953] x13: ffff00001179b525 x12: ffff000011142000
[    2.067270] x11: ffff000011129f20 x10: ffff0000105da970
[    2.072587] x9 : 00000000ffffffd0 x8 : 0000000000000194
[    2.077903] x7 : 612065657266206f x6 : ffff0000111e7b09
[    2.083220] x5 : 0000000000000003 x4 : 0000000000000000
[    2.088537] x3 : 0000000000000000 x2 : 00000000ffffffff
[    2.093854] x1 : 28b70f0a2b60a500 x0 : 0000000000000000
[    2.099173] Call trace:
[    2.101618]  __free_irq+0xc0/0x358
[    2.105021]  free_irq+0x38/0x98
[    2.108170]  imx_mu_shutdown+0x90/0xb0
[    2.111921]  mbox_free_channel.part.2+0x24/0xb8
[    2.116453]  mbox_free_channel+0x18/0x28

This bug is present from the beginning of times.

Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ocfs2: fix passing zero to 'PTR_ERR' warning

[ Upstream commit 188c523e1c271d537f3c9f55b6b65bf4476de32f ]

Fix a static code checker warning:
fs/ocfs2/acl.c:331
ocfs2_acl_chmod() warn: passing zero to 'PTR_ERR'

Link: http://lkml.kernel.org/r/1dee278b-6c96-eec2-ce76-fe6e07c6e20f@linux.alibaba.com
Fixes: 5ee0fbd50fd ("ocfs2: revert using ocfs2_acl_chmod to avoid inode cluster lock hang")
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cpum_sf: Check for SDBT and SDB consistency

[ Upstream commit 247f265fa502e7b17a0cb0cc330e055a36aafce4 ]

Each SBDT is located at a 4KB page and contains 512 entries.
Each entry of a SDBT points to a SDB, a 4KB page containing
sampled data. The last entry is a link to another SDBT page.

When an event is created the function sequence executed is:

  __hw_perf_event_init()
  +--> allocate_buffers()
       +--> realloc_sampling_buffers()
    +---> alloc_sample_data_block()

Both functions realloc_sampling_buffers() and
alloc_sample_data_block() allocate pages and the allocation
can fail. This is handled correctly and all allocated
pages are freed and error -ENOMEM is returned to the
top calling function. Finally the event is not created.

Once the event has been created, the amount of initially
allocated SDBT and SDB can be too low. This is detected
during measurement interrupt handling, where the amount
of lost samples is calculated. If the number of lost samples
is too high considering sampling frequency and already allocated
SBDs, the number of SDBs is enlarged during the next execution
of cpumsf_pmu_enable().

If more SBDs need to be allocated, functions

       realloc_sampling_buffers()
       +---> alloc-sample_data_block()

are called to allocate more pages. Page allocation may fail
and the returned error is ignored. A SDBT and SDB setup
already exists.

However the modified SDBTs and SDBs might end up in a situation
where the first entry of an SDBT does not point to an SDB,
but another SDBT, basicly an SBDT without payload.
This can not be handled by the interrupt handler, where an SDBT
must have at least one entry pointing to an SBD.

Add a check to avoid SDBTs with out payload (SDBs) when enlarging
the buffer setup.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/unwind: filter out unreliable bogus %r14

[ Upstream commit bf018ee644897d7982e1b8dd8b15e97db6e1a4da ]

Currently unwinder unconditionally returns %r14 from the first frame
pointed by %r15 from pt_regs. A task could be interrupted when a function
already allocated this frame (if it needs it) for its callees or to
store local variables. In that case this frame would contain random
values from stack or values stored there by a callee. As we are only
interested in %r14 to get potential return address, skip bogus return
addresses which doesn't belong to kernel text.

This helps to avoid duplicating filtering logic in unwider users, most
of which use unwind_get_return_address() and would choke on bogus 0
address returned by it otherwise.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h

[ Upstream commit a8de1304b7df30e3a14f2a8b9709bb4ff31a0385 ]

The DTC v1.5.1 added references to (U)INT32_MAX.

This is no problem for user-space programs since <stdint.h> defines
(U)INT32_MAX along with (u)int32_t.

For the kernel space, libfdt_env.h needs to be adjusted before we
pull in the changes.

In the kernel, we usually use s/u32 instead of (u)int32_t for the
fixed-width types.

Accordingly, we already have S/U32_MAX for their max values.
So, we should not add (U)INT32_MAX to <linux/limits.h> any more.

Instead, add them to the in-kernel libfdt_env.h to compile the
latest libfdt.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mailbox: imx: Clear the right interrupts at shutdown

[ Upstream commit 5f0af07e89199ac51cdd4f25bc303bdc703f4e9c ]

Make sure to only clear enabled interrupts keeping count
of the connection type.

Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/zcrypt: handle new reply code FILTERED_BY_HYPERVISOR

[ Upstream commit 6733775a92eacd612ac88afa0fd922e4ffeb2bc7 ]

This patch introduces support for a new architectured reply
code 0x8B indicating that a hypervisor layer (if any) has
rejected an ap message.

Linux may run as a guest on top of a hypervisor like zVM
or KVM. So the crypto hardware seen by the ap bus may be
restricted by the hypervisor for example only a subset like
only clear key crypto requests may be supported. Other
requests will be filtered out - rejected by the hypervisor.
The new reply code 0x8B will appear in such cases and needs
to get recognized by the ap bus and zcrypt device driver zoo.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf regs: Make perf_reg_name() return "unknown" instead of NULL

[ Upstream commit 5b596e0ff0e1852197d4c82d3314db5e43126bf7 ]

To avoid breaking the build on arches where this is not wired up, at
least all the other features should be made available and when using
this specific routine, the "unknown" should point the user/developer to
the need to wire this up on this particular hardware architecture.

Detected in a container mipsel debian cross build environment, where it
shows up as:

  In file included from /usr/mipsel-linux-gnu/include/stdio.h:867,
                   from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
                   from util/session.c:13:
  In function 'printf',
      inlined from 'regs_dump__printf' at util/session.c:1103:3,
      inlined from 'regs__printf' at util/session.c:1131:2:
  /usr/mipsel-linux-gnu/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
    107 |   return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cross compiler details:

  mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909

Also on mips64:

  In file included from /usr/mips64-linux-gnuabi64/include/stdio.h:867,
                   from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
                   from util/session.c:13:
  In function 'printf',
      inlined from 'regs_dump__printf' at util/session.c:1103:3,
      inlined from 'regs__printf' at util/session.c:1131:2,
      inlined from 'regs_user__printf' at util/session.c:1139:3,
      inlined from 'dump_sample' at util/session.c:1246:3,
      inlined from 'machines__deliver_event' at util/session.c:1421:3:
  /usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
    107 |   return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  In function 'printf',
      inlined from 'regs_dump__printf' at util/session.c:1103:3,
      inlined from 'regs__printf' at util/session.c:1131:2,
      inlined from 'regs_intr__printf' at util/session.c:1147:3,
      inlined from 'dump_sample' at util/session.c:1249:3,
      inlined from 'machines__deliver_event' at util/session.c:1421:3:
  /usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
    107 |   return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cross compiler details:

  mips64-linux-gnuabi64-gcc (Debian 9.2.1-8) 9.2.1 20190909

Fixes: 2bcd355b71da ("perf tools: Add interface to arch registers sets")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-95wjyv4o65nuaeweq31t7l1s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf script: Fix brstackinsn for AUXTRACE

[ Upstream commit 0cd032d3b5fcebf5454315400ab310746a81ca53 ]

brstackinsn must be allowed to be set by the user when AUX area data has
been captured because, in that case, the branch stack might be
synthesized on the fly. This fixes the following error:

Before:

  $ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot
  [ perf record: Woken up 19 times to write data ]
  [ perf record: Captured and wrote 2.274 MB perf.data ]
  $ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
  Display of branch stack assembler requested, but non all-branch filter set
  Hint: run 'perf record -b ...'

After:

  $ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot
  [ perf record: Woken up 19 times to write data ]
  [ perf record: Captured and wrote 2.274 MB perf.data ]
  $ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
            grep 13759 [002]  8091.310257:       1862                                        instructions:uH:      5641d58069eb bmexec+0x86b (/bin/grep)
        bmexec+2485:
        00005641d5806b35                        jnz 0x5641d5806bd0              # MISPRED
        00005641d5806bd0                        movzxb  (%r13,%rdx,1), %eax
        00005641d5806bd6                        add %rdi, %rax
        00005641d5806bd9                        movzxb  -0x1(%rax), %edx
        00005641d5806bdd                        cmp %rax, %r14
        00005641d5806be0                        jnb 0x5641d58069c0              # MISPRED
        mismatch of LBR data and executable
        00005641d58069c0                        movzxb  (%r13,%rdx,1), %edi

Fixes: 48d02a1d5c13 ("perf script: Add 'brstackinsn' for branch stacks")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191127095322.15417-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf diff: Use llabs() with 64-bit values

[ Upstream commit 98e93245113d0f5c279ef77f4a9e7d097323ad71 ]

To fix these build errors on a debian mipsel cross build environment:

  builtin-diff.c: In function 'block_cycles_diff_cmp':
  builtin-diff.c:550:6: error: absolute value function 'labs' given an argument of type 's64' {aka 'long long int'} but has parameter of type 'long int' which may cause truncation of value [-Werror=absolute-value]
    550 |  l = labs(left->diff.cycles);
        |      ^~~~
  builtin-diff.c:551:6: error: absolute value function 'labs' given an argument of type 's64' {aka 'long long int'} but has parameter of type 'long int' which may cause truncation of value [-Werror=absolute-value]
    551 |  r = labs(right->diff.cycles);
        |      ^~~~

Fixes: 99150a1faab2 ("perf diff: Use hists to manage basic blocks per symbol")
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-pn7szy5uw384ntjgk6zckh6a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: move cifsFileInfo_put logic into a work-queue

[ Upstream commit 32546a9586aa4565035bb557e191648e022b29e8 ]

This patch moves the final part of the cifsFileInfo_put() logic where we
need a write lock on lock_sem to be processed in a separate thread that
holds no other locks.
This is to prevent deadlocks like the one below:

> there are 6 processes looping to while trying to down_write
> cinode->lock_sem, 5 of them from _cifsFileInfo_put, and one from
> cifs_new_fileinfo
>
> and there are 5 other processes which are blocked, several of them
> waiting on either PG_writeback or PG_locked (which are both set), all
> for the same page of the file
>
> 2 inode_lock() (inode->i_rwsem) for the file
> 1 wait_on_page_writeback() for the page
> 1 down_read(inode->i_rwsem) for the inode of the directory
> 1 inode_lock()(inode->i_rwsem) for the inode of the directory
> 1 __lock_page
>
>
> so processes are blocked waiting on:
>   page flags PG_locked and PG_writeback for one specific page
>   inode->i_rwsem for the directory
>   inode->i_rwsem for the file
>   cifsInodeInflock_sem
>
>
>
> here are the more gory details (let me know if I need to provide
> anything more/better):
>
> [0 00:48:22.765] [UN]  PID: 8863   TASK: ffff8c691547c5c0  CPU: 3
> COMMAND: "reopen_file"
>  #0 [ffff9965007e3ba8] __schedule at ffffffff9b6e6095
>  #1 [ffff9965007e3c38] schedule at ffffffff9b6e64df
>  #2 [ffff9965007e3c48] rwsem_down_write_slowpath at ffffffff9af283d7
>  #3 [ffff9965007e3cb8] legitimize_path at ffffffff9b0f975d
>  #4 [ffff9965007e3d08] path_openat at ffffffff9b0fe55d
>  #5 [ffff9965007e3dd8] do_filp_open at ffffffff9b100a33
>  #6 [ffff9965007e3ee0] do_sys_open at ffffffff9b0eb2d6
>  #7 [ffff9965007e3f38] do_syscall_64 at ffffffff9ae04315
> * (I think legitimize_path is bogus)
>
> in path_openat
>         } else {
>                 const char *s = path_init(nd, flags);
>                 while (!(error = link_path_walk(s, nd)) &&
>                         (error = do_last(nd, file, op)) > 0) {  <<<<
>
> do_last:
>         if (open_flag & O_CREAT)
>                 inode_lock(dir->d_inode);  <<<<
>         else
> so it's trying to take inode->i_rwsem for the directory
>
>      DENTRY           INODE           SUPERBLK     TYPE PATH
> ffff8c68bb8e79c0 ffff8c691158ef20 ffff8c6915bf9000 DIR  /mnt/vm1_smb/
> inode.i_rwsem is ffff8c691158efc0
>
> <struct rw_semaphore 0xffff8c691158efc0>:
>         owner: <struct task_struct 0xffff8c6914275d00> (UN -   8856 -
> reopen_file), counter: 0x0000000000000003
>         waitlist: 2
>         0xffff9965007e3c90     8863   reopen_file      UN 0  1:29:22.926
>   RWSEM_WAITING_FOR_WRITE
>         0xffff996500393e00     9802   ls               UN 0  1:17:26.700
>   RWSEM_WAITING_FOR_READ
>
>
> the owner of the inode.i_rwsem of the directory is:
>
> [0 00:00:00.109] [UN]  PID: 8856   TASK: ffff8c6914275d00  CPU: 3
> COMMAND: "reopen_file"
>  #0 [ffff99650065b828] __schedule at ffffffff9b6e6095
>  #1 [ffff99650065b8b8] schedule at ffffffff9b6e64df
>  #2 [ffff99650065b8c8] schedule_timeout at ffffffff9b6e9f89
>  #3 [ffff99650065b940] msleep at ffffffff9af573a9
>  #4 [ffff99650065b948] _cifsFileInfo_put.cold.63 at ffffffffc0a42dd6 [cifs]
>  #5 [ffff99650065ba38] cifs_writepage_locked at ffffffffc0a0b8f3 [cifs]
>  #6 [ffff99650065bab0] cifs_launder_page at ffffffffc0a0bb72 [cifs]
>  #7 [ffff99650065bb30] invalidate_inode_pages2_range at ffffffff9b04d4bd
>  #8 [ffff99650065bcb8] cifs_invalidate_mapping at ffffffffc0a11339 [cifs]
>  #9 [ffff99650065bcd0] cifs_revalidate_mapping at ffffffffc0a1139a [cifs]
> #10 [ffff99650065bcf0] cifs_d_revalidate at ffffffffc0a014f6 [cifs]
> #11 [ffff99650065bd08] path_openat at ffffffff9b0fe7f7
> #12 [ffff99650065bdd8] do_filp_open at ffffffff9b100a33
> #13 [ffff99650065bee0] do_sys_open at ffffffff9b0eb2d6
> #14 [ffff99650065bf38] do_syscall_64 at ffffffff9ae04315
>
> cifs_launder_page is for page 0xffffd1e2c07d2480
>
> crash> page.index,mapping,flags 0xffffd1e2c07d2480
>       index = 0x8
>       mapping = 0xffff8c68f3cd0db0
>   flags = 0xfffffc0008095
>
>   PAGE-FLAG       BIT  VALUE
>   PG_locked         0  0000001
>   PG_uptodate       2  0000004
>   PG_lru            4  0000010
>   PG_waiters        7  0000080
>   PG_writeback     15  0008000
>
>
> inode is ffff8c68f3cd0c40
> inode.i_rwsem is ffff8c68f3cd0ce0
>      DENTRY           INODE           SUPERBLK     TYPE PATH
> ffff8c68a1f1b480 ffff8c68f3cd0c40 ffff8c6915bf9000 REG
> /mnt/vm1_smb/testfile.8853
>
>
> this process holds the inode->i_rwsem for the parent directory, is
> laundering a page attached to the inode of the file it's opening, and in
> _cifsFileInfo_put is trying to down_write the cifsInodeInflock_sem
> for the file itself.
>
>
> <struct rw_semaphore 0xffff8c68f3cd0ce0>:
>         owner: <struct task_struct 0xffff8c6914272e80> (UN -   8854 -
> reopen_file), counter: 0x0000000000000003
>         waitlist: 1
>         0xffff9965005dfd80     8855   reopen_file      UN 0  1:29:22.912
>   RWSEM_WAITING_FOR_WRITE
>
> this is the inode.i_rwsem for the file
>
> the owner:
>
> [0 00:48:22.739] [UN]  PID: 8854   TASK: ffff8c6914272e80  CPU: 2
> COMMAND: "reopen_file"
>  #0 [ffff99650054fb38] __schedule at ffffffff9b6e6095
>  #1 [ffff99650054fbc8] schedule at ffffffff9b6e64df
>  #2 [ffff99650054fbd8] io_schedule at ffffffff9b6e68e2
>  #3 [ffff99650054fbe8] __lock_page at ffffffff9b03c56f
>  #4 [ffff99650054fc80] pagecache_get_page at ffffffff9b03dcdf
>  #5 [ffff99650054fcc0] grab_cache_page_write_begin at ffffffff9b03ef4c
>  #6 [ffff99650054fcd0] cifs_write_begin at ffffffffc0a064ec [cifs]
>  #7 [ffff99650054fd30] generic_perform_write at ffffffff9b03bba4
>  #8 [ffff99650054fda8] __generic_file_write_iter at ffffffff9b04060a
>  #9 [ffff99650054fdf0] cifs_strict_writev.cold.70 at ffffffffc0a4469b [cifs]
> #10 [ffff99650054fe48] new_sync_write at ffffffff9b0ec1dd
> #11 [ffff99650054fed0] vfs_write at ffffffff9b0eed35
> #12 [ffff99650054ff00] ksys_write at ffffffff9b0eefd9
> #13 [ffff99650054ff38] do_syscall_64 at ffffffff9ae04315
>
> the process holds the inode->i_rwsem for the file to which it's writing,
> and is trying to __lock_page for the same page as in the other processes
>
>
> the other tasks:
> [0 00:00:00.028] [UN]  PID: 8859   TASK: ffff8c6915479740  CPU: 2
> COMMAND: "reopen_file"
>  #0 [ffff9965007b39d8] __schedule at ffffffff9b6e6095
>  #1 [ffff9965007b3a68] schedule at ffffffff9b6e64df
>  #2 [ffff9965007b3a78] schedule_timeout at ffffffff9b6e9f89
>  #3 [ffff9965007b3af0] msleep at ffffffff9af573a9
>  #4 [ffff9965007b3af8] cifs_new_fileinfo.cold.61 at ffffffffc0a42a07 [cifs]
>  #5 [ffff9965007b3b78] cifs_open at ffffffffc0a0709d [cifs]
>  #6 [ffff9965007b3cd8] do_dentry_open at ffffffff9b0e9b7a
>  #7 [ffff9965007b3d08] path_openat at ffffffff9b0fe34f
>  #8 [ffff9965007b3dd8] do_filp_open at ffffffff9b100a33
>  #9 [ffff9965007b3ee0] do_sys_open at ffffffff9b0eb2d6
> #10 [ffff9965007b3f38] do_syscall_64 at ffffffff9ae04315
>
> this is opening the file, and is trying to down_write cinode->lock_sem
>
>
> [0 00:00:00.041] [UN]  PID: 8860   TASK: ffff8c691547ae80  CPU: 2
> COMMAND: "reopen_file"
> [0 00:00:00.057] [UN]  PID: 8861   TASK: ffff8c6915478000  CPU: 3
> COMMAND: "reopen_file"
> [0 00:00:00.059] [UN]  PID: 8858   TASK: ffff8c6914271740  CPU: 2
> COMMAND: "reopen_file"
> [0 00:00:00.109] [UN]  PID: 8862   TASK: ffff8c691547dd00  CPU: 6
> COMMAND: "reopen_file"
>  #0 [ffff9965007c3c78] __schedule at ffffffff9b6e6095
>  #1 [ffff9965007c3d08] schedule at ffffffff9b6e64df
>  #2 [ffff9965007c3d18] schedule_timeout at ffffffff9b6e9f89
>  #3 [ffff9965007c3d90] msleep at ffffffff9af573a9
>  #4 [ffff9965007c3d98] _cifsFileInfo_put.cold.63 at ffffffffc0a42dd6 [cifs]
>  #5 [ffff9965007c3e88] cifs_close at ffffffffc0a07aaf [cifs]
>  #6 [ffff9965007c3ea0] __fput at ffffffff9b0efa6e
>  #7 [ffff9965007c3ee8] task_work_run at ffffffff9aef1614
>  #8 [ffff9965007c3f20] exit_to_usermode_loop at ffffffff9ae03d6f
>  #9 [ffff9965007c3f38] do_syscall_64 at ffffffff9ae0444c
>
> closing the file, and trying to down_write cifsi->lock_sem
>
>
> [0 00:48:22.839] [UN]  PID: 8857   TASK: ffff8c6914270000  CPU: 7
> COMMAND: "reopen_file"
>  #0 [ffff9965006a7cc8] __schedule at ffffffff9b6e6095
>  #1 [ffff9965006a7d58] schedule at ffffffff9b6e64df
>  #2 [ffff9965006a7d68] io_schedule at ffffffff9b6e68e2
>  #3 [ffff9965006a7d78] wait_on_page_bit at ffffffff9b03cac6
>  #4 [ffff9965006a7e10] __filemap_fdatawait_range at ffffffff9b03b028
>  #5 [ffff9965006a7ed8] filemap_write_and_wait at ffffffff9b040165
>  #6 [ffff9965006a7ef0] cifs_flush at ffffffffc0a0c2fa [cifs]
>  #7 [ffff9965006a7f10] filp_close at ffffffff9b0e93f1
>  #8 [ffff9965006a7f30] __x64_sys_close at ffffffff9b0e9a0e
>  #9 [ffff9965006a7f38] do_syscall_64 at ffffffff9ae04315
>
> in __filemap_fdatawait_range
>                         wait_on_page_writeback(page);
> for the same page of the file
>
>
>
> [0 00:48:22.718] [UN]  PID: 8855   TASK: ffff8c69142745c0  CPU: 7
> COMMAND: "reopen_file"
>  #0 [ffff9965005dfc98] __schedule at ffffffff9b6e6095
>  #1 [ffff9965005dfd28] schedule at ffffffff9b6e64df
>  #2 [ffff9965005dfd38] rwsem_down_write_slowpath at ffffffff9af283d7
>  #3 [ffff9965005dfdf0] cifs_strict_writev at ffffffffc0a0c40a [cifs]
>  #4 [ffff9965005dfe48] new_sync_write at ffffffff9b0ec1dd
>  #5 [ffff9965005dfed0] vfs_write at ffffffff9b0eed35
>  #6 [ffff9965005dff00] ksys_write at ffffffff9b0eefd9
>  #7 [ffff9965005dff38] do_syscall_64 at ffffffff9ae04315
>
>         inode_lock(inode);
>
>
> and one 'ls' later on, to see whether the rest of the mount is available
> (the test file is in the root, so we get blocked up on the directory
> ->i_rwsem), so the entire mount is unavailable
>
> [0 00:36:26.473] [UN]  PID: 9802   TASK: ffff8c691436ae80  CPU: 4
> COMMAND: "ls"
>  #0 [ffff996500393d28] __schedule at ffffffff9b6e6095
>  #1 [ffff996500393db8] schedule at ffffffff9b6e64df
>  #2 [ffff996500393dc8] rwsem_down_read_slowpath at ffffffff9b6e9421
>  #3 [ffff996500393e78] down_read_killable at ffffffff9b6e95e2
>  #4 [ffff996500393e88] iterate_dir at ffffffff9b103c56
>  #5 [ffff996500393ec8] ksys_getdents64 at ffffffff9b104b0c
>  #6 [ffff996500393f30] __x64_sys_getdents64 at ffffffff9b104bb6
>  #7 [ffff996500393f38] do_syscall_64 at ffffffff9ae04315
>
> in iterate_dir:
>         if (shared)
>                 res = down_read_killable(&inode->i_rwsem);  <<<<
>         else
>                 res = down_write_killable(&inode->i_rwsem);
>

Reported-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cdrom: respect device capabilities during opening action

[ Upstream commit 366ba7c71ef77c08d06b18ad61b26e2df7352338 ]

Reading the TOC only works if the device can play audio, otherwise
these commands fail (and possibly bring the device to an unhealthy
state.)

Similarly, cdrom_mmc3_profile() should only be called if the device
supports generic packet commands.

To: Jens Axboe <axboe@kernel.dk>
Cc: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: unittest: fix memory leak in attach_node_and_children

[ Upstream commit 2aacace6dbbb6b6ce4e177e6c7ea901f389c0472 ]

In attach_node_and_children memory is allocated for full_name via
kasprintf. If the condition of the 1st if is not met the function
returns early without freeing the memory. Add a kfree() to fix that.

This has been detected with kmemleak:
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205327
It looks like the leak was introduced by this commit:
Fixes: 5babefb7f7ab ("of: unittest: allow base devicetree to have symbol metadata")

Signed-off-by: Erhard Furtner <erhard_f@mailbox.org>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: io_allocate_scq_urings() should return a sane state

[ Upstream commit eb065d301e8c83643367bdb0898becc364046bda ]

We currently rely on the ring destroy on cleaning things up in case of
failure, but io_allocate_scq_urings() can leave things half initialized
if only parts of it fails.

Be nice and return with either everything setup in success, or return an
error with things nicely cleaned up.

Reported-by: syzbot+0d818c0d39399188f393@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: virtio: Keep reading on -EAGAIN

[ Upstream commit 7e60746005573a06149cdee7acedf428906f3a59 ]

When we get an interrupt from the socket getting readable,
and start reading, there's a possibility for a race. This
depends on the implementation of the device, but e.g. with
qemu's libvhost-user, we can see:

 device                 virtio_uml
---------------------------------------
  write header
                         get interrupt
                         read header
                         read body -> returns -EAGAIN
  write body

The -EAGAIN return is because the socket is non-blocking,
and then this leads us to abandon this message.

In fact, we've already read the header, so when the get
another signal/interrupt for the body, we again read it
as though it's a new message header, and also abandon it
for the same reason (wrong size etc.)

This essentially breaks things, and if that message was
one that required a response, it leads to a deadlock as
the device is waiting for the response but we'll never
reply.

Fix this by spinning on -EAGAIN as well when we read the
message body. We need to handle -EAGAIN as "no message"
while reading the header, since we share an interrupt.

Note that this situation is highly unlikely to occur in
normal usage, since there will be very few messages and
only in the startup phase. With the inband call feature
this does tend to happen (eventually) though.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Fix use-after-free bug in cifs_reconnect()

[ Upstream commit 8354d88efdab72b4da32fc4f032448fcef22dab4 ]

Ensure we grab an active reference in cifs superblock while doing
failover to prevent automounts (DFS links) of expiring and then
destroying the superblock pointer.

This patch fixes the following KASAN report:

[  464.301462] BUG: KASAN: use-after-free in
cifs_reconnect+0x6ab/0x1350
[  464.303052] Read of size 8 at addr ffff888155e580d0 by task
cifsd/1107

[  464.304682] CPU: 3 PID: 1107 Comm: cifsd Not tainted 5.4.0-rc4+ #13
[  464.305552] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS rel-1.12.1-0-ga5cab58-rebuilt.opensuse.org 04/01/2014
[  464.307146] Call Trace:
[  464.307875]  dump_stack+0x5b/0x90
[  464.308631]  print_address_description.constprop.0+0x16/0x200
[  464.309478]  ? cifs_reconnect+0x6ab/0x1350
[  464.310253]  ? cifs_reconnect+0x6ab/0x1350
[  464.311040]  __kasan_report.cold+0x1a/0x41
[  464.311811]  ? cifs_reconnect+0x6ab/0x1350
[  464.312563]  kasan_report+0xe/0x20
[  464.313300]  cifs_reconnect+0x6ab/0x1350
[  464.314062]  ? extract_hostname.part.0+0x90/0x90
[  464.314829]  ? printk+0xad/0xde
[  464.315525]  ? _raw_spin_lock+0x7c/0xd0
[  464.316252]  ? _raw_read_lock_irq+0x40/0x40
[  464.316961]  ? ___ratelimit+0xed/0x182
[  464.317655]  cifs_readv_from_socket+0x289/0x3b0
[  464.318386]  cifs_read_from_socket+0x98/0xd0
[  464.319078]  ? cifs_readv_from_socket+0x3b0/0x3b0
[  464.319782]  ? try_to_wake_up+0x43c/0xa90
[  464.320463]  ? cifs_small_buf_get+0x4b/0x60
[  464.321173]  ? allocate_buffers+0x98/0x1a0
[  464.321856]  cifs_demultiplex_thread+0x218/0x14a0
[  464.322558]  ? cifs_handle_standard+0x270/0x270
[  464.323237]  ? __switch_to_asm+0x40/0x70
[  464.323893]  ? __switch_to_asm+0x34/0x70
[  464.324554]  ? __switch_to_asm+0x40/0x70
[  464.325226]  ? __switch_to_asm+0x40/0x70
[  464.325863]  ? __switch_to_asm+0x34/0x70
[  464.326505]  ? __switch_to_asm+0x40/0x70
[  464.327161]  ? __switch_to_asm+0x34/0x70
[  464.327784]  ? finish_task_switch+0xa1/0x330
[  464.328414]  ? __switch_to+0x363/0x640
[  464.329044]  ? __schedule+0x575/0xaf0
[  464.329655]  ? _raw_spin_lock_irqsave+0x82/0xe0
[  464.330301]  kthread+0x1a3/0x1f0
[  464.330884]  ? cifs_handle_standard+0x270/0x270
[  464.331624]  ? kthread_create_on_node+0xd0/0xd0
[  464.332347]  ret_from_fork+0x35/0x40

[  464.333577] Allocated by task 1110:
[  464.334381]  save_stack+0x1b/0x80
[  464.335123]  __kasan_kmalloc.constprop.0+0xc2/0xd0
[  464.335848]  cifs_smb3_do_mount+0xd4/0xb00
[  464.336619]  legacy_get_tree+0x6b/0xa0
[  464.337235]  vfs_get_tree+0x41/0x110
[  464.337975]  fc_mount+0xa/0x40
[  464.338557]  vfs_kern_mount.part.0+0x6c/0x80
[  464.339227]  cifs_dfs_d_automount+0x336/0xd29
[  464.339846]  follow_managed+0x1b1/0x450
[  464.340449]  lookup_fast+0x231/0x4a0
[  464.341039]  path_openat+0x240/0x1fd0
[  464.341634]  do_filp_open+0x126/0x1c0
[  464.342277]  do_sys_open+0x1eb/0x2c0
[  464.342957]  do_syscall_64+0x5e/0x190
[  464.343555]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[  464.344772] Freed by task 0:
[  464.345347]  save_stack+0x1b/0x80
[  464.345966]  __kasan_slab_free+0x12c/0x170
[  464.346576]  kfree+0xa6/0x270
[  464.347211]  rcu_core+0x39c/0xc80
[  464.347800]  __do_softirq+0x10d/0x3da

[  464.348919] The buggy address belongs to the object at
ffff888155e58000
                which belongs to the cache kmalloc-256 of size 256
[  464.350222] The buggy address is located 208 bytes inside of
                256-byte region [ffff888155e58000, ffff888155e58100)
[  464.351575] The buggy address belongs to the page:
[  464.352333] page:ffffea0005579600 refcount:1 mapcount:0
mapping:ffff88815a803400 index:0x0 compound_mapcount: 0
[  464.353583] flags: 0x200000000010200(slab|head)
[  464.354209] raw: 0200000000010200 ffffea0005576200 0000000400000004
ffff88815a803400
[  464.355353] raw: 0000000000000000 0000000080100010 00000001ffffffff
0000000000000000
[  464.356458] page dumped because: kasan: bad access detected

[  464.367005] Memory state around the buggy address:
[  464.367787]  ffff888155e57f80: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[  464.368877]  ffff888155e58000: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[  464.369967] >ffff888155e58080: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[  464.371111]                                                  ^
[  464.371775]  ffff888155e58100: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[  464.372893]  ffff888155e58180: fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc fc
[  464.373983] ==================================================================

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: Don't add -mabi= flags when building with Clang

[ Upstream commit 465bfd9c44dea6b55962b5788a23ac87a467c923 ]

When building pseries_defconfig, building vdso32 errors out:

  error: unknown target ABI 'elfv1'

This happens because -m32 in clang changes the target to 32-bit,
which does not allow the ABI to be changed.

Commit 4dc831aa8813 ("powerpc: Fix compiling a BE kernel with a
powerpc64le toolchain") added these flags to fix building big endian
kernels with a little endian GCC.

Clang doesn't need -mabi because the target triple controls the
default value. -mlittle-endian and -mbig-endian manipulate the triple
into either powerpc64-* or powerpc64le-*, which properly sets the
default ABI.

Adding a debug print out in the PPC64TargetInfo constructor after line
383 above shows this:

  $ echo | ./clang -E --target=powerpc64-linux -mbig-endian -o /dev/null -
  Default ABI: elfv1

  $ echo | ./clang -E --target=powerpc64-linux -mlittle-endian -o /dev/null -
  Default ABI: elfv2

  $ echo | ./clang -E --target=powerpc64le-linux -mbig-endian -o /dev/null -
  Default ABI: elfv1

  $ echo | ./clang -E --target=powerpc64le-linux -mlittle-endian -o /dev/null -
  Default ABI: elfv2

Don't specify -mabi when building with clang to avoid the build error
with -m32 and not change any code generation.

-mcall-aixdesc is not an implemented flag in clang so it can be safely
excluded as well, see commit 238abecde8ad ("powerpc: Don't use gcc
specific options on clang").

pseries_defconfig successfully builds after this patch and
powernv_defconfig and ppc44x_defconfig don't regress.

Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
[mpe: Trim clang links in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191119045712.39633-2-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/kallsyms: fix definitely-lost memory leak

[ Upstream commit 21915eca088dc271c970e8351290e83d938114ac ]

build_initial_tok_table() overwrites unused sym_entry to shrink the
table size. Before the entry is overwritten, table[i].sym must be freed
since it is malloc'ed data.

This fixes the 'definitely lost' report from valgrind. I ran valgrind
against x86_64_defconfig of v5.4-rc8 kernel, and here is the summary:

[Before the fix]

  LEAK SUMMARY:
     definitely lost: 53,184 bytes in 2,874 blocks

[After the fix]

  LEAK SUMMARY:
     definitely lost: 0 bytes in 0 blocks

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Call find_vma under mmap_sem

[ Upstream commit a9ae8731e6e52829a935d81a65d7f925cb95dbac ]

find_vma() must be called under the mmap_sem, reorganize this code to
do the vma check after entering the lock.

Further, fix the unlocked use of struct task_struct's mm, instead use
the mm from hmm_mirror which has an active mm_grab. Also the mm_grab
must be converted to a mm_get before acquiring mmap_sem or calling
find_vma().

Fixes: 66c45500bfdc ("drm/amdgpu: use new HMM APIs and helpers")
Fixes: 0919195f2b0d ("drm/amdgpu: Enable amdgpu_ttm_tt_get_user_pages in worker threads")
Link: https://lore.kernel.org/r/20191112202231.3856-11-jgg@ziepe.ca
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: fix unsigned len comparison with less than zero

[ Upstream commit 00e0590dbaec6f1bcaa36a85467d7e3497ced522 ]

The sanity check in macro update_for_len checks to see if len
is less than zero, however, len is a size_t so it can never be
less than zero, so this sanity check is a no-op.  Fix this by
making len a ssize_t so the comparison will work and add ulen
that is a size_t copy of len so that the min() macro won't
throw warnings about comparing different types.

Addresses-Coverity: ("Macro compares unsigned to 0")
Fixes: f1bd904175e8 ("apparmor: add the base fns() for domain labels")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic

[ Upstream commit 7a1323b5dfe44a9013a2cc56ef2973034a00bf88 ]

The crash handler calls hv_synic_cleanup() to shutdown the
Hyper-V synthetic interrupt controller.  But if the CPU
that calls hv_synic_cleanup() has a VMbus channel interrupt
assigned to it (which is likely the case in smaller VM sizes),
hv_synic_cleanup() returns an error and the synthetic
interrupt controller isn't shutdown.  While the lack of
being shutdown hasn't caused a known problem, it still
should be fixed for highest reliability.

So directly call hv_synic_disable_regs() instead of
hv_synic_cleanup(), which ensures that the synic is always
shutdown.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/power/x86/intel-speed-select: Ignore missing config level

[ Upstream commit 20183ccd3e4d01d23b0a01fe9f3ee73fbae312fa ]

It is possible that certain config levels are not available, even
if the max level includes the level. There can be missing levels in
some platforms. So ignore the level when called for information dump
for all levels and fail if specifically ask for the missing level.

Here the changes is to continue reading information about other levels
even if we fail to get information for the current level. But use the
"processed" flag to indicate the failure. When the "processed" flag is
not set, don't dump information about that level.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: lynxpoint: Setup correct IRQ handlers

[ Upstream commit e272f7ec070d212b9301d5a465bc8952f8dcf908 ]

When commit 75e99bf5ed8f ("gpio: lynxpoint: set default handler to be
handle_bad_irq()") switched default handler to be handle_bad_irq() the
lp_irq_type() function remained untouched. It means that even request_irq()
can't change the handler and we are not able to handle IRQs properly anymore.
Fix it by setting correct handlers in the lp_irq_type() callback.

Fixes: 75e99bf5ed8f ("gpio: lynxpoint: set default handler to be handle_bad_irq()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20191118180251.31439-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: mpc8xxx: Don't overwrite default irq_set_type callback

[ Upstream commit 4e50573f39229d5e9c985fa3b4923a8b29619ade ]

The per-SoC devtype structures can contain their own callbacks that
overwrite mpc8xxx_gpio_devtype_default.

The clear intention is that mpc8xxx_irq_set_type is used in case the SoC
does not specify a more specific callback. But what happens is that if
the SoC doesn't specify one, its .irq_set_type is de-facto NULL, and
this overwrites mpc8xxx_irq_set_type to a no-op. This means that the
following SoCs are affected:

- fsl,mpc8572-gpio
- fsl,ls1028a-gpio
- fsl,ls1088a-gpio

On these boards, the irq_set_type does exactly nothing, and the GPIO
controller keeps its GPICR register in the hardware-default state. On
the LS1028A, that is ACTIVE_BOTH, which means 2 interrupts are raised
even if the IRQ client requests LEVEL_HIGH. Another implication is that
the IRQs are not checked (e.g. level-triggered interrupts are not
rejected, although they are not supported).

Fixes: 82e39b0d8566 ("gpio: mpc8xxx: handle differences between incarnations at a single place")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20191115125551.31061-1-olteanv@gmail.com
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: intel_pmc_core: Add Comet Lake (CML) platform support to intel_pmc_core driver

[ Upstream commit 5406327d43edd9a171bd260f49c752d148727eaf ]

Add Comet Lake to the list of the platforms that intel_pmc_core driver
supports for pmc_core device.

Just like Ice Lake, Comet Lake can also reuse all the Cannon Lake PCH
IPs. No additional effort is needed to enable but to simply reuse them.

Cc: Mario Limonciello <mario.limonciello@dell.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: David E. Box <david.e.box@intel.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: intel_pmc_core: Fix the SoC naming inconsistency

[ Upstream commit 43e82d8aa92503d264309fb648b251b2d85caf1a ]

Intel's SoCs follow a naming convention which spells out the SoC name as
two words instead of one word (E.g: Cannon Lake vs Cannonlake). Thus fix
the naming inconsistency across the intel_pmc_core driver, so future
SoCs can follow the naming consistency as below.

Cometlake -> Comet Lake
Tigerlake -> Tiger Lake
Elkhartlake -> Elkhart Lake

Cc: Mario Limonciello <mario.limonciello@dell.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: David E. Box <david.e.box@intel.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio/mpc8xxx: fix qoriq GPIO reading

[ Upstream commit 787b64a43f7acacf8099329ea08872e663f1e74f ]

Qoriq requires the IBE register to be set to enable GPIO inputs to be
read.  Set it.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1iX3HC-00069N-0T@rmk-PC.armlinux.org.uk
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs: skip VA block list update in reset flow

[ Upstream commit 71c5e55e7c077fa17c42fbda91a8d14322825c44 ]

Reduce context close time by skipping the VA block free list update in
order to avoid hard reset with open contexts.
Reset with open contexts can potentially lead to a kernel crash as the
generic pool of the MMU hops is destroyed while it is not empty because
some unmap operations are not done.
The commit affect mainly when running on simulator.

Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: Fix deadlock in f2fs_gc() context during atomic files handling

[ Upstream commit 677017d196ba2a4cfff13626b951cc9a206b8c7c ]

The FS got stuck in the below stack when the storage is almost
full/dirty condition (when FG_GC is being done).

schedule_timeout
io_schedule_timeout
congestion_wait
f2fs_drop_inmem_pages_all
f2fs_gc
f2fs_balance_fs
__write_node_page
f2fs_fsync_node_pages
f2fs_do_sync_file
f2fs_ioctl

The root cause for this issue is there is a potential infinite loop
in f2fs_drop_inmem_pages_all() for the case where gc_failure is true
and when there an inode whose i_gc_failures[GC_FAILURE_ATOMIC] is
not set. Fix this by keeping track of the total atomic files
currently opened and using that to exit from this condition.

Fix-suggested-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: iscsi: Wait for all commands to finish before freeing a session

[ Upstream commit e9d3009cb936bd0faf0719f68d98ad8afb1e613b ]

The iSCSI target driver is the only target driver that does not wait for
ongoing commands to finish before freeing a session. Make the iSCSI target
driver wait for ongoing commands to finish before freeing a session. This
patch fixes the following KASAN complaint:

BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710
Read of size 8 at addr ffff8881154eca70 by task kworker/0:2/247

CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: target_completion target_complete_ok_work [target_core_mod]
Call Trace:
 dump_stack+0x8a/0xd6
 print_address_description.constprop.0+0x40/0x60
 __kasan_report.cold+0x1b/0x33
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 __lock_acquire+0xb1a/0x2710
 lock_acquire+0xd3/0x200
 _raw_spin_lock_irqsave+0x43/0x60
 target_release_cmd_kref+0x162/0x7f0 [target_core_mod]
 target_put_sess_cmd+0x2e/0x40 [target_core_mod]
 lio_check_stop_free+0x12/0x20 [iscsi_target_mod]
 transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod]
 target_complete_ok_work+0x1b0/0x790 [target_core_mod]
 process_one_work+0x549/0xa40
 worker_thread+0x7a/0x5d0
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

Allocated by task 889:
 save_stack+0x23/0x90
 __kasan_kmalloc.constprop.0+0xcf/0xe0
 kasan_slab_alloc+0x12/0x20
 kmem_cache_alloc+0xf6/0x360
 transport_alloc_session+0x29/0x80 [target_core_mod]
 iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod]
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

Freed by task 1025:
 save_stack+0x23/0x90
 __kasan_slab_free+0x13a/0x190
 kasan_slab_free+0x12/0x20
 kmem_cache_free+0x146/0x400
 transport_free_session+0x179/0x2f0 [target_core_mod]
 transport_deregister_session+0x130/0x180 [target_core_mod]
 iscsit_close_session+0x12c/0x350 [iscsi_target_mod]
 iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod]
 iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod]
 iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod]
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

The buggy address belongs to the object at ffff8881154ec9c0
 which belongs to the cache se_sess_cache of size 352
The buggy address is located 176 bytes inside of
 352-byte region [ffff8881154ec9c0, ffff8881154ecb20)
The buggy address belongs to the page:
page:ffffea0004553b00 refcount:1 mapcount:0 mapping:ffff888101755400 index:0x0 compound_mapcount: 0
flags: 0x2fff000000010200(slab|head)
raw: 2fff000000010200 dead000000000100 dead000000000122 ffff888101755400
raw: 0000000000000000 0000000080130013 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                             ^
 ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc

Cc: Mike Christie <mchristi@redhat.com>
Link: https://lore.kernel.org/r/20191113220508.198257-3-bvanassche@acm.org
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Don't send data to unbound connection

[ Upstream commit 238191d65d7217982d69e21c1d623616da34b281 ]

If a faulty initiator fails to bind the socket to the iSCSI connection
before emitting a command, for instance, a subsequent send_pdu, it will
crash the kernel due to a null pointer dereference in sock_sendmsg(), as
shown in the log below.  This patch makes sure the bind succeeded before
trying to use the socket.

BUG: kernel NULL pointer dereference, address: 0000000000000018
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.4.0-rc2.iscsi+ #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[   24.158246] Workqueue: iscsi_q_0 iscsi_xmitworker
[   24.158883] RIP: 0010:apparmor_socket_sendmsg+0x5/0x20
[...]
[   24.161739] RSP: 0018:ffffab6440043ca0 EFLAGS: 00010282
[   24.162400] RAX: ffffffff891c1c00 RBX: ffffffff89d53968 RCX: 0000000000000001
[   24.163253] RDX: 0000000000000030 RSI: ffffab6440043d00 RDI: 0000000000000000
[   24.164104] RBP: 0000000000000030 R08: 0000000000000030 R09: 0000000000000030
[   24.165166] R10: ffffffff893e66a0 R11: 0000000000000018 R12: ffffab6440043d00
[   24.166038] R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d5575a62e90
[   24.166919] FS:  0000000000000000(0000) GS:ffff9d557db80000(0000) knlGS:0000000000000000
[   24.167890] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   24.168587] CR2: 0000000000000018 CR3: 000000007a838000 CR4: 00000000000006e0
[   24.169451] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   24.170320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   24.171214] Call Trace:
[   24.171537]  security_socket_sendmsg+0x3a/0x50
[   24.172079]  sock_sendmsg+0x16/0x60
[   24.172506]  iscsi_sw_tcp_xmit_segment+0x77/0x120
[   24.173076]  iscsi_sw_tcp_pdu_xmit+0x58/0x170
[   24.173604]  ? iscsi_dbg_trace+0x63/0x80
[   24.174087]  iscsi_tcp_task_xmit+0x101/0x280
[   24.174666]  iscsi_xmit_task+0x83/0x110
[   24.175206]  iscsi_xmitworker+0x57/0x380
[   24.175757]  ? __schedule+0x2a2/0x700
[   24.176273]  process_one_work+0x1b5/0x360
[   24.176837]  worker_thread+0x50/0x3c0
[   24.177353]  kthread+0xf9/0x130
[   24.177799]  ? process_one_work+0x360/0x360
[   24.178401]  ? kthread_park+0x90/0x90
[   24.178915]  ret_from_fork+0x35/0x40
[   24.179421] Modules linked in:
[   24.179856] CR2: 0000000000000018
[   24.180327] ---[ end trace b4b7674b6df5f480 ]---

Signed-off-by: Anatol Pomazau <anatol@google.com>
Co-developed-by: Frank Mayhar <fmayhar@google.com>
Signed-off-by: Frank Mayhar <fmayhar@google.com>
Co-developed-by: Bharath Ravi <rbharath@google.com>
Signed-off-by: Bharath Ravi <rbharath@google.com>
Co-developed-by: Khazhimsel Kumykov <khazhy@google.com>
Signed-off-by: Khazhimsel Kumykov <khazhy@google.com>
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Fix up auto hibern8 enablement

[ Upstream commit 71d848b8d97ec0f8e993d63cf9de6ac8b3f7c43d ]

Fix up possible unclocked register access to auto hibern8 register in
resume path and through sysfs entry. Meanwhile, enable auto hibern8 only
after device is fully initialized in probe path.

Link: https://lore.kernel.org/r/1573798172-20534-4-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: core: Release SPC-2 reservations when closing a session

[ Upstream commit 80647a89eaf3f2549741648f3230cd6ff68c23b4 ]

The SCSI specs require releasing SPC-2 reservations when a session is
closed. Make sure that the target core does this.

Running the libiscsi tests triggers the KASAN complaint shown below.  This
patch fixes that use-after-free.

BUG: KASAN: use-after-free in target_check_reservation+0x171/0x980 [target_core_mod]
Read of size 8 at addr ffff88802ecd1878 by task iscsi_trx/17200

CPU: 0 PID: 17200 Comm: iscsi_trx Not tainted 5.4.0-rc1-dbg+ #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 dump_stack+0x8a/0xd6
 print_address_description.constprop.0+0x40/0x60
 __kasan_report.cold+0x1b/0x34
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 target_check_reservation+0x171/0x980 [target_core_mod]
 __target_execute_cmd+0xb1/0xf0 [target_core_mod]
 target_execute_cmd+0x22d/0x4d0 [target_core_mod]
 transport_generic_new_cmd+0x31f/0x5b0 [target_core_mod]
 transport_handle_cdb_direct+0x6f/0x90 [target_core_mod]
 iscsit_execute_cmd+0x381/0x3f0 [iscsi_target_mod]
 iscsit_sequence_cmd+0x13b/0x1f0 [iscsi_target_mod]
 iscsit_process_scsi_cmd+0x4c/0x130 [iscsi_target_mod]
 iscsit_get_rx_pdu+0x8e8/0x15f0 [iscsi_target_mod]
 iscsi_target_rx_thread+0x105/0x1b0 [iscsi_target_mod]
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

Allocated by task 1079:
 save_stack+0x23/0x90
 __kasan_kmalloc.constprop.0+0xcf/0xe0
 kasan_slab_alloc+0x12/0x20
 kmem_cache_alloc+0xfe/0x3a0
 transport_alloc_session+0x29/0x80 [target_core_mod]
 iscsi_target_login_thread+0xceb/0x1920 [iscsi_target_mod]
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

Freed by task 17193:
 save_stack+0x23/0x90
 __kasan_slab_free+0x13a/0x190
 kasan_slab_free+0x12/0x20
 kmem_cache_free+0xc8/0x3e0
 transport_free_session+0x179/0x2f0 [target_core_mod]
 transport_deregister_session+0x121/0x170 [target_core_mod]
 iscsit_close_session+0x12c/0x350 [iscsi_target_mod]
 iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod]
 iscsit_response_queue+0x8fa/0xc00 [iscsi_target_mod]
 iscsi_target_tx_thread+0x28e/0x390 [iscsi_target_mod]
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

The buggy address belongs to the object at ffff88802ecd1860
 which belongs to the cache se_sess_cache of size 352
The buggy address is located 24 bytes inside of
 352-byte region [ffff88802ecd1860, ffff88802ecd19c0)
The buggy address belongs to the page:
page:ffffea0000bb3400 refcount:1 mapcount:0 mapping:ffff8880bef2ed00 index:0x0 compound_mapcount: 0
flags: 0x1000000000010200(slab|head)
raw: 1000000000010200 dead000000000100 dead000000000122 ffff8880bef2ed00
raw: 0000000000000000 0000000080270027 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88802ecd1700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88802ecd1780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88802ecd1800: fb fb fb fb fc fc fc fc fc fc fc fc fb fb fb fb
                                                                ^
 ffff88802ecd1880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88802ecd1900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Cc: Mike Christie <mchristi@redhat.com>
Link: https://lore.kernel.org/r/20191113220508.198257-2-bvanassche@acm.org
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: NCR5380: Add disconnect_mask module parameter

[ Upstream commit 0b7a223552d455bcfba6fb9cfc5eef2b5fce1491 ]

Add a module parameter to inhibit disconnect/reselect for individual
targets. This gains compatibility with Aztec PowerMonster SCSI/SATA
adapters with buggy firmware. (No fix is available from the vendor.)

Apparently these adapters pass-through the product/vendor of the attached
SATA device. Since they can't be identified from the response to an INQUIRY
command, a device blacklist flag won't work.

Cc: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/993b17545990f31f9fa5a98202b51102a68e7594.1573875417.git.fthain@telegraphics.com.au
Reviewed-and-tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_debug: num_tgts must be >= 0

[ Upstream commit aa5334c4f3014940f11bf876e919c956abef4089 ]

Passing the parameter "num_tgts=-1" will start an infinite loop that
exhausts the system memory

Link: https://lore.kernel.org/r/20191115163727.24626-1-mlombard@redhat.com
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Fix error handing during hibern8 enter

[ Upstream commit 6d303e4b19d694cdbebf76bcdb51ada664ee953d ]

During clock gating (ufshcd_gate_work()), we first put the link hibern8 by
calling ufshcd_uic_hibern8_enter() and if ufshcd_uic_hibern8_enter()
returns success (0) then we gate all the clocks.  Now let’s zoom in to what
ufshcd_uic_hibern8_enter() does internally: It calls
__ufshcd_uic_hibern8_enter() and if failure is encountered, link recovery
shall put the link back to the highest HS gear and returns success (0) to
ufshcd_uic_hibern8_enter() which is the issue as link is still in active
state due to recovery!  Now ufshcd_uic_hibern8_enter() returns success to
ufshcd_gate_work() and hence it goes ahead with gating the UFS clock while
link is still in active state hence I believe controller would raise UIC
error interrupts. But when we service the interrupt, clocks might have
already been disabled!

This change fixes for this by returning failure from
__ufshcd_uic_hibern8_enter() if recovery succeeds as link is still not in
hibern8, upon receiving the error ufshcd_hibern8_enter() would initiate
retry to put the link state back into hibern8.

Link: https://lore.kernel.org/r/1573798172-20534-8-git-send-email-cang@codeaurora.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm80xx: Fix for SATA device discovery

[ Upstream commit ce21c63ee995b7a8b7b81245f2cee521f8c3c220 ]

Driver was missing complete() call in mpi_sata_completion which result in
SATA abort error handling timing out. That causes the device to be left in
the in_recovery state so subsequent commands sent to the device fail and
the OS removes access to it.

Link: https://lore.kernel.org/r/20191114100910.6153-2-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: peter chang <dpf@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fixmap: Use __fix_to_virt() instead of fix_to_virt()

[ Upstream commit 77693a5fb57be4606a6024ec8e3076f9499b906b ]

Modify back __set_fixmap() to using __fix_to_virt() instead
of fix_to_virt() otherwise the following happens because it
seems GCC doesn't see idx as a builtin const.

  CC      mm/early_ioremap.o
In file included from ./include/linux/kernel.h:11:0,
                 from mm/early_ioremap.c:11:
In function ‘fix_to_virt’,
    inlined from ‘__set_fixmap’ at ./arch/powerpc/include/asm/fixmap.h:87:2,
    inlined from ‘__early_ioremap’ at mm/early_ioremap.c:156:4:
./include/linux/compiler.h:350:38: error: call to ‘__compiletime_assert_32’ declared with attribute error: BUILD_BUG_ON failed: idx >= __end_of_fixed_addresses
  _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
                                      ^
./include/linux/compiler.h:331:4: note: in definition of macro ‘__compiletime_assert’
    prefix ## suffix();    \
    ^
./include/linux/compiler.h:350:2: note: in expansion of macro ‘_compiletime_assert’
  _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
  ^
./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
 #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
                                     ^
./include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
  BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
  ^
./include/asm-generic/fixmap.h:32:2: note: in expansion of macro ‘BUILD_BUG_ON’
  BUILD_BUG_ON(idx >= __end_of_fixed_addresses);
  ^

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 4cfac2f9c7f1 ("powerpc/mm: Simplify __set_fixmap()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f4984c615f90caa3277775a68849afeea846850d.1568295907.git.christophe.leroy@c-s.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: Fix the race between the release of watchdog_core_data and cdev

[ Upstream commit 72139dfa2464e43957d330266994740bb7be2535 ]

The struct cdev is embedded in the struct watchdog_core_data. In the
current code, we manage the watchdog_core_data with a kref, but the
cdev is manged by a kobject. There is no any relationship between
this kref and kobject. So it is possible that the watchdog_core_data is
freed before the cdev is entirely released. We can easily get the
following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and
CONFIG_DEBUG_OBJECTS_TIMERS enabled.
  ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38
  WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0
  Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4
  CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180
  Hardware name: Marvell OcteonTX CN96XX board (DT)
  pstate: 00400009 (nzcv daif +PAN -UAO)
  pc : debug_print_object+0xb0/0xf0
  lr : debug_print_object+0xb0/0xf0
  sp : ffff80001cbcfc70
  x29: ffff80001cbcfc70 x28: ffff800010ea2128
  x27: ffff800010bad000 x26: 0000000000000000
  x25: ffff80001103c640 x24: ffff80001107b268
  x23: ffff800010bad9e8 x22: ffff800010ea2128
  x21: ffff000bc2c62af8 x20: ffff80001103c600
  x19: ffff800010e867d8 x18: 0000000000000060
  x17: 0000000000000000 x16: 0000000000000000
  x15: ffff000bd7240470 x14: 6e6968207473696c
  x13: 5f72656d6974203a x12: 6570797420746365
  x11: 6a626f2029302065 x10: 7461747320657669
  x9 : 7463612820657669 x8 : 3378302f3078302b
  x7 : 0000000000001d7a x6 : ffff800010fd5889
  x5 : 0000000000000000 x4 : 0000000000000000
  x3 : 0000000000000000 x2 : ffff000bff948548
  x1 : 276a1c9e1edc2300 x0 : 0000000000000000
  Call trace:
   debug_print_object+0xb0/0xf0
   debug_check_no_obj_freed+0x1e8/0x210
   kfree+0x1b8/0x368
   watchdog_cdev_unregister+0x88/0xc8
   watchdog_dev_unregister+0x38/0x48
   watchdog_unregister_device+0xa8/0x100
   softdog_exit+0x18/0xfec4 [softdog]
   __arm64_sys_delete_module+0x174/0x200
   el0_svc_handler+0xd0/0x1c8
   el0_svc+0x8/0xc

This is a common issue when using cdev embedded in a struct.
Fortunately, we already have a mechanism to solve this kind of issue.
Please see commit 233ed09d7fda ("chardev: add helper function to
register char devs with a struct device") for more detail.

In this patch, we choose to embed the struct device into the
watchdog_core_data, and use the API provided by the commit 233ed09d7fda
to make sure that the release of watchdog_core_data and cdev are
in sequence.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: prevent deferral of watchdogd wakeup on RT

[ Upstream commit a19f89335f4bda3d77d991c96583e3e51856acbb ]

When PREEMPT_RT is enabled, all hrtimer expiry functions are
deferred for execution into the context of ksoftirqd unless otherwise
annotated.

Deferring the expiry of the hrtimer used by the watchdog core, however,
is a waste, as the callback does nothing but queue a kthread work item
and wakeup watchdogd.

It's worst then that, too: the deferral through ksoftirqd also means
that for correct behavior a user must adjust the scheduling parameters
of both watchdogd _and_ ksoftirqd, which is unnecessary and has other
side effects (like causing unrelated expiry functions to execute at
potentially elevated priority).

Instead, mark the hrtimer used by the watchdog core as being _HARD to
allow it's execution directly from hardirq context.  The work done in
this expiry function is well-bounded and minimal.

A user still must adjust the scheduling parameters of the watchdogd
to be correct w.r.t. their application needs.

Link: https://lkml.kernel.org/r/0e02d8327aeca344096c246713033887bc490dd7.1538089180.git.julia@ni.com
Cc: Guenter Roeck <linux@roeck-us.net>
Reported-and-tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reported-by: Tim Sander <tim@krieglstein.org>
Signed-off-by: Julia Cartwright <julia@ni.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
[bigeasy: use only HRTIMER_MODE_REL_HARD]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191105144506.clyadjbvnn7b7b2m@linutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: imx7ulp: Fix reboot hang

[ Upstream commit 6083ab7b2f3f25022e2e8f4c42f14a8521f47873 ]

The following hang is observed when a 'reboot' command is issued:

# reboot
# Stopping network: OK
Stopping klogd: OK
Stopping syslogd: OK
umount: devtmpfs busy - remounted read-only
[    8.612079] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
[   10.694753] reboot: Restarting system
[   11.699008] Reboot failed -- System halted

Fix this problem by adding a .restart ops member.

Fixes: 41b630f41bf7 ("watchdog: Add i.MX7ULP watchdog support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191029174037.25381-1-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device

[ Upstream commit 8725aa4fa7ded30211ebd28bb1c9bae806eb3841 ]

In the event that the RMI device is unreachable, the calls to rmi_set_mode() or
rmi_set_page() will fail before registering the RMI transport device. When the
device is removed, rmi_remove() will call rmi_unregister_transport_device()
which will attempt to access the rmi_dev pointer which was not set.
This patch adds a check of the RMI_STARTED bit before calling
rmi_unregister_transport_device().  The RMI_STARTED bit is only set
after rmi_register_transport_device() completes successfully.

The kernel oops was reported in this message:
https://www.spinics.net/lists/linux-input/msg58433.html

[jkosina@suse.cz: reworded changelog as agreed with Andrew]
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reported-by: Federico Cerutti <federico@ceres-c.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: Improve Windows Precision Touchpad detection.

[ Upstream commit 2dbc6f113acd74c66b04bf49fb027efd830b1c5a ]

Per Microsoft spec, usage 0xC5 (page 0xFF) returns a blob containing
data used to verify the touchpad as a Windows Precision Touchpad.

   0x85, REPORTID_PTPHQA,    //    REPORT_ID (PTPHQA)
    0x09, 0xC5,              //    USAGE (Vendor Usage 0xC5)
    0x15, 0x00,              //    LOGICAL_MINIMUM (0)
    0x26, 0xff, 0x00,        //    LOGICAL_MAXIMUM (0xff)
    0x75, 0x08,              //    REPORT_SIZE (8)
    0x96, 0x00, 0x01,        //    REPORT_COUNT (0x100 (256))
    0xb1, 0x02,              //    FEATURE (Data,Var,Abs)

However, some devices, namely Microsoft's Surface line of products
instead implement a "segmented device certification report" (usage 0xC6)
which returns the same report, but in smaller chunks.

    0x06, 0x00, 0xff,        //     USAGE_PAGE (Vendor Defined)
    0x85, REPORTID_PTPHQA,   //     REPORT_ID (PTPHQA)
    0x09, 0xC6,              //     USAGE (Vendor usage for segment #)
    0x25, 0x08,              //     LOGICAL_MAXIMUM (8)
    0x75, 0x08,              //     REPORT_SIZE (8)
    0x95, 0x01,              //     REPORT_COUNT (1)
    0xb1, 0x02,              //     FEATURE (Data,Var,Abs)
    0x09, 0xC7,              //     USAGE (Vendor Usage)
    0x26, 0xff, 0x00,        //     LOGICAL_MAXIMUM (0xff)
    0x95, 0x20,              //     REPORT_COUNT (32)
    0xb1, 0x02,              //     FEATURE (Data,Var,Abs)

By expanding Win8 touchpad detection to also look for the segmented
report, all Surface touchpads are now properly recognized by
hid-multitouch.

Signed-off-by: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libnvdimm/btt: fix variable 'rc' set but not used

[ Upstream commit 4e24e37d5313edca8b4ab86f240c046c731e28d6 ]

drivers/nvdimm/btt.c: In function 'btt_read_pg':
drivers/nvdimm/btt.c:1264:8: warning: variable 'rc' set but not used
[-Wunused-but-set-variable]
    int rc;
        ^~

Add a ratelimited message in case a storm of errors is encountered.

Fixes: d9b83c756953 ("libnvdimm, btt: rework error clearing")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/1572530719-32161-1-git-send-email-cai@lca.pw
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8937/1: spectre-v2: remove Brahma-B53 from hardening

[ Upstream commit 4ae5061a19b550dfe25397843427ed2ebab16b16 ]

When the default processor handling was added to the function
cpu_v7_spectre_init() it only excluded other ARM implemented processor
cores. The Broadcom Brahma B53 core is not implemented by ARM so it
ended up falling through into the set of processors that attempt to use
the ARM_SMCCC_ARCH_WORKAROUND_1 service to harden the branch predictor.

Since this workaround is not necessary for the Brahma-B53 this commit
explicitly checks for it and prevents it from applying a branch
predictor hardening workaround.

Fixes: 10115105cb3a ("ARM: spectre-v2: add firmware based hardening")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: i2c-hid: fix no irq after reset on raydium 3118

[ Upstream commit 0c8432236dea20a95f68fa17989ea3f8af0186a5 ]

On some ThinkPad L390 some raydium 3118 touchscreen devices
doesn't response any data after reset, but some does.

Add this ID to no irq quirk,
then don't wait for any response alike on these touchscreens.
All kinds of raydium 3118 devices work fine.

BugLink: https://bugs.launchpad.net/bugs/1849721
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-hidpp: Silence intermittent get_battery_capacity errors

[ Upstream commit 61005d65b6c7dcf61c19516e6ebe5acc02d2cdda ]

My Logitech M185 (PID:4038) 2.4 GHz wireless HID++ mouse is causing
intermittent errors like these in the log:

[11091.034857] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[12388.031260] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[16613.718543] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[23529.938728] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09

We are already silencing error-code 0x09 (HIDPP_ERROR_RESOURCE_ERROR)
errors in other places, lets do the same in
hidpp20_batterylevel_get_battery_capacity to remove these harmless,
but scary looking errors from the dmesg output.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: Improve validation build error handling

[ Upstream commit 93512dad334deb444619505f1fbb761156f7471b ]

Schema errors can cause make to exit before useful information is
printed. This leaves developers wondering what's wrong. It can be
overcome passing '-k' to make, but that's not an obvious solution.
There's 2 scenarios where this happens.

When using DT_SCHEMA_FILES to validate with a single schema, any error
in the schema results in processed-schema.yaml being empty causing a
make error. The result is the specific errors in the schema are never
shown because processed-schema.yaml is the first target built. Simply
making processed-schema.yaml last in extra-y ensures the full schema
validation with detailed error messages happen first.

The 2nd problem is while schema errors are ignored for
processed-schema.yaml, full validation of the schema still runs in
parallel and any schema validation errors will still stop the build when
running validation of dts files. The fix is to not add the schema
examples to extra-y in this case. This means 'dtbs_check' is no longer a
superset of 'dt_binding_check'. Update the documentation to make this
clear.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse

[ Upstream commit f1a0094cbbe97a5f8aca7bdc64bfe43ac9dc6879 ]

The PixArt OEM mouse disconnets/reconnects every minute on
Linux. All contents of dmesg are repetitive:

[ 1465.810014] usb 1-2.2: USB disconnect, device number 20
[ 1467.431509] usb 1-2.2: new low-speed USB device number 21 using xhci_hcd
[ 1467.654982] usb 1-2.2: New USB device found, idVendor=03f0,idProduct=1f4a, bcdDevice= 1.00
[ 1467.654985] usb 1-2.2: New USB device strings: Mfr=1, Product=2,SerialNumber=0
[ 1467.654987] usb 1-2.2: Product: HP USB Optical Mouse
[ 1467.654988] usb 1-2.2: Manufacturer: PixArt
[ 1467.699722] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:05:00.3/usb1/1-2/1-2.2/1-2.2:1.0/0003:03F0:1F4A.0012/input/input19
[ 1467.700124] hid-generic 0003:03F0:1F4A.0012: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:05:00.3-2.2/input0

So add HID_QUIRK_ALWAYS_POLL for this one as well.
Test the patch, the mouse is no longer disconnected and there are no
duplicate logs in dmesg.

Reference:
https://github.com/sriemer/fix-linux-mouse

Signed-off-by: Jinke Fan <fanjinke@hygon.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: at least try to shrink 1 node in bch_mca_scan()

[ Upstream commit 9fcc34b1a6dd4b8e5337e2b6ef45e428897eca6b ]

In bch_mca_scan(), the number of shrinking btree node is calculated
by code like this,
unsigned long nr = sc->nr_to_scan;

        nr /= c->btree_pages;
        nr = min_t(unsigned long, nr, mca_can_free(c));
variable sc->nr_to_scan is number of objects (here is bcache B+tree
nodes' number) to shrink, and pointer variable sc is sent from memory
management code as parametr of a callback.

If sc->nr_to_scan is smaller than c->btree_pages, after the above
calculation, variable 'nr' will be 0 and nothing will be shrunk. It is
frequeently observed that only 1 or 2 is set to sc->nr_to_scan and make
nr to be zero. Then bch_mca_scan() will do nothing more then acquiring
and releasing mutex c->bucket_lock.

This patch checkes whether nr is 0 after the above calculation, if 0
is the result then set 1 to variable 'n'. Then at least bch_mca_scan()
will try to shrink a single B+tree node.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: pxa: fix one of the pxa RTC clocks

[ Upstream commit 46acbcb4849b2ca2e6e975e7c8130c1d61c8fd0c ]

The pxa27x platforms have a single IP with 2 drivers, sa1100-rtc and
rtc-pxa drivers.

A previous patch fixed the sa1100-rtc case, but the pxa-rtc wasn't
fixed. This patch completes the previous one.

Fixes: 8b6d10345e16 ("clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Link: https://lkml.kernel.org/r/20191026194420.11918-1-robert.jarzmik@free.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE

[ Upstream commit 79172ab20bfd8437b277254028efdb68484e2c21 ]

Since the scsi subsystem adopted the blk-mq API, a host with zero
sg_tablesize crashes with a NULL pointer dereference.

blk_queue_max_segments: set to minimum 1
scsi 0:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
scsi target0:0:0: Beginning Domain Validation
scsi target0:0:0: Domain Validation skipping write tests
scsi target0:0:0: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
scsi 0:0:1:0: Direct-Access     QEMU     QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
scsi target0:0:1: Beginning Domain Validation
scsi target0:0:1: Domain Validation skipping write tests
scsi target0:0:1: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
scsi 0:0:2:0: CD-ROM            QEMU     QEMU CD-ROM      2.5+ PQ: 0 ANSI: 5
scsi target0:0:2: Beginning Domain Validation
scsi target0:0:2: Domain Validation skipping write tests
scsi target0:0:2: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
sr 0:0:2:0: Power-on or device reset occurred
sd 0:0:0:0: Power-on or device reset occurred
sd 0:0:1:0: Power-on or device reset occurred
sd 0:0:0:0: [sda] 10485762 512-byte logical blocks: (5.37 GB/5.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Unable to handle kernel NULL pointer dereference at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<001cd874>] blk_mq_free_request+0x66/0xe2
SR: 2004  SP: (ptrval)  a2: 00874520
d0: 00000000    d1: 00000000    d2: 009ba800    d3: 00000000
d4: 00000000    d5: 08000002    a0: 0087be68    a1: 009a81e0
Process kworker/u2:2 (pid: 15, task=(ptrval))
Frame format=7 eff addr=0000007a ssw=0505 faddr=0000007a
wb 1 stat/addr/data: 0000 00000000 00000000
wb 2 stat/addr/data: 0000 00000000 00000000
wb 3 stat/addr/data: 0000 0000007a 00000000
push data: 00000000 00000000 00000000 00000000
Stack from 0087bd98:
        00000002 00000000 0087be72 009a7820 0087bdb4 001c4f6c 009a7820 0087bdd4
        0024d200 009a7820 0024d0dc 0087be72 009baa00 0087be68 009a5000 0087be7c
        00265d10 009a5000 0087be72 00000003 00000000 00000000 00000000 0087be68
        00000bb8 00000005 00000000 00000000 00000000 00000000 00265c56 00000000
        009ba60c 0036ddf4 00000002 ffffffff 009baa00 009ba600 009a50d6 0087be74
        00227ba0 009baa08 00000001 009baa08 009ba60c 0036ddf4 00000000 00000000
Call Trace: [<001c4f6c>] blk_put_request+0xe/0x14
 [<0024d200>] __scsi_execute+0x124/0x174
 [<0024d0dc>] __scsi_execute+0x0/0x174
 [<00265d10>] sd_revalidate_disk+0xba/0x1f02
 [<00265c56>] sd_revalidate_disk+0x0/0x1f02
 [<0036ddf4>] strlen+0x0/0x22
 [<00227ba0>] device_add+0x3da/0x604
 [<0036ddf4>] strlen+0x0/0x22
 [<00267e64>] sd_probe+0x30c/0x4b4
 [<0002da44>] process_one_work+0x0/0x402
 [<0022b978>] really_probe+0x226/0x354
 [<0022bc34>] driver_probe_device+0xa4/0xf0
 [<0002da44>] process_one_work+0x0/0x402
 [<0022bcd0>] __driver_attach_async_helper+0x50/0x70
 [<00035dae>] async_run_entry_fn+0x36/0x130
 [<0002db88>] process_one_work+0x144/0x402
 [<0002e1aa>] worker_thread+0x0/0x570
 [<0002e29a>] worker_thread+0xf0/0x570
 [<0002e1aa>] worker_thread+0x0/0x570
 [<003768d8>] schedule+0x0/0xb8
 [<0003f58c>] __init_waitqueue_head+0x0/0x12
 [<00033e92>] kthread+0xc2/0xf6
 [<000331e8>] kthread_parkme+0x0/0x4e
 [<003768d8>] schedule+0x0/0xb8
 [<00033dd0>] kthread+0x0/0xf6
 [<00002c10>] ret_from_kernel_thread+0xc/0x14
Code: 0280 0006 0800 56c0 4400 0280 0000 00ff <52b4> 0c3a 082b 0006 0013 6706 2042 53a8 00c4 4ab9 0047 3374 6640 202d 000c 670c
Disabling lock debugging due to kernel taint

Avoid this by setting sg_tablesize = 1.

Link: https://lore.kernel.org/r/4567bcae94523b47d6f3b77450ba305823bca479.1572656814.git.fthain@telegraphics.com.au
Reported-and-tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
References: commit 68ab2d76e4be ("scsi: cxlflash: Set sg_tablesize to 1 instead of SG_NONE")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/book3s/mm: Update Oops message to print the correct translation in use

[ Upstream commit d7e02f7b7991dbe14a2acfb0e53d675cd149001c ]

Avoids confusion when printing Oops message like below

 Faulting instruction address: 0xc00000000008bdb4
 Oops: Kernel access of bad area, sig: 11 [#1]
 LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV

This was because we never clear the MMU_FTR_HPTE_TABLE feature flag
even if we run with radix translation. It was discussed that we should
look at this feature flag as an indication of the capability to run
hash translation and we should not clear the flag even if we run in
radix translation. All the code paths check for radix_enabled() check and
if found true consider we are running with radix translation. Follow the
same sequence for finding the MMU translation string to be used in Oops
message.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190711145814.17970-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/eeh: differentiate duplicate detection message

[ Upstream commit de84ffc3ccbeec3678f95a3d898fc188efa0d9c5 ]

Currently when an EEH error is detected, the system log receives the
same (or almost the same) message twice:

  EEH: PHB#0 failure detected, location: N/A
  EEH: PHB#0 failure detected, location: N/A
or
  EEH: eeh_dev_check_failure: Frozen PHB#0-PE#0 detected
  EEH: Frozen PHB#0-PE#0 detected

This looks like a bug, but in fact the messages are from different
functions and mean slightly different things.  So keep both but change
one of the messages slightly, so that it's clear they are different:

  EEH: PHB#0 failure detected, location: N/A
  EEH: Recovering PHB#0, location: N/A
or
  EEH: eeh_dev_check_failure: Frozen PHB#0-PE#0 detected
  EEH: Recovering PHB#0-PE#0

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/43817cb6e6631b0828b9a6e266f60d1f8ca8eb22.1571288375.git.sbobroff@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/security: Fix wrong message when RFI Flush is disable

[ Upstream commit 4e706af3cd8e1d0503c25332b30cad33c97ed442 ]

The issue was showing "Mitigation" message via sysfs whatever the
state of "RFI Flush", but it should show "Vulnerable" when it is
disabled.

If you have "L1D private" feature enabled and not "RFI Flush" you are
vulnerable to meltdown attacks.

"RFI Flush" is the key feature to mitigate the meltdown whatever the
"L1D private" state.

SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only.

So the message should be as the truth table shows:

  CPU | L1D private | RFI Flush |                sysfs
  ----|-------------|-----------|-------------------------------------
   P9 |    False    |   False   | Vulnerable
   P9 |    False    |   True    | Mitigation: RFI Flush
   P9 |    True     |   False   | Vulnerable: L1D private per thread
   P9 |    True     |   True    | Mitigation: RFI Flush, L1D private per thread
   P8 |    False    |   False   | Vulnerable
   P8 |    False    |   True    | Mitigation: RFI Flush

Output before this fix:
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: RFI Flush, L1D private per thread
  # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: L1D private per thread

Output after fix:
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: RFI Flush, L1D private per thread
  # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Vulnerable: L1D private per thread

Signed-off-by: Gustavo L. F. Walbon <gwalbon@linux.ibm.com>
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190502210907.42375-1-gwalbon@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: rpaphp: Correctly match ibm, my-drc-index to drc-name when using drc-info

[ Upstream commit 4f9f2d3d7a434b7f882b72550194c9278f4a3925 ]

The newer ibm,drc-info property is a condensed description of the old
ibm,drc-* properties (ie. names, types, indexes, and power-domains).
When matching a drc-index to a drc-name we need to verify that the
index is within the start and last drc-index range and map it to a
drc-name using the drc-name-prefix and logical index.

Fix the mapping by checking that the index is within the range of the
current drc-info entry, and build the name from the drc-name-prefix
concatenated with the starting drc-name-suffix value and the sequential
index obtained by subtracting ibm,my-drc-index from this entries
drc-start-index.

Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-10-git-send-email-tyreld@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: rpaphp: Annotate and correctly byte swap DRC properties

[ Upstream commit 0737686778c6dbe0908d684dd5b9c05b127526ba ]

The device tree is in big endian format and any properties directly
retrieved using OF helpers that don't explicitly byte swap should
be annotated. In particular there are several places where we grab
the opaque property value for the old ibm,drc-* properties and the
ibm,my-drc-index property.

Fix this for better static checking by annotating values we know to
explicitly big endian, and byte swap where appropriate.

Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-9-git-send-email-tyreld@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: rpaphp: Don't rely on firmware feature to imply drc-info support

[ Upstream commit 52e2b0f16574afd082cff0f0e8567b2d9f68c033 ]

In the event that the partition is migrated to a platform with older
firmware that doesn't support the ibm,drc-info property the device
tree is modified to remove the ibm,drc-info property and replace it
with the older style ibm,drc-* properties for types, names, indexes,
and power-domains. One of the requirements of the drc-info firmware
feature is that the client is able to handle both the new property,
and old style properties at runtime. Therefore we can't rely on the
firmware feature alone to dictate which property is currently
present in the device tree.

Fix this short coming by checking explicitly for the ibm,drc-info
property, and falling back to the older ibm,drc-* properties if it
doesn't exist.

Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-6-git-send-email-tyreld@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/cmm: Implement release() function for sysfs device

[ Upstream commit 7d8212747435c534c8d564fbef4541a463c976ff ]

When unloading the module, one gets
  ------------[ cut here ]------------
  Device 'cmm0' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt.
  WARNING: CPU: 0 PID: 19308 at drivers/base/core.c:1244 .device_release+0xcc/0xf0
  ...

We only have one static fake device. There is nothing to do when
releasing the device (via cmm_exit()).

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-2-david@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: fix potential bug which ends in system hang

[ Upstream commit cfcbae3895b86c390ede57b2a8f601dd5972b47b ]

In function __ufshcd_query_descriptor(), in the event of an error
happening, we directly goto out_unlock and forget to invaliate
hba->dev_cmd.query.descriptor pointer. This results in this pointer still
valid in ufshcd_copy_query_response() for other query requests which go
through ufshcd_exec_raw_upiu_cmd(). This will cause __memcpy() crash and
system hangs. Log as shown below:

Unable to handle kernel paging request at virtual address
ffff000012233c40
Mem abort info:
   ESR = 0x96000047
   Exception class = DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
Data abort info:
   ISV = 0, ISS = 0x00000047
   CM = 0, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000028cc735c
[ffff000012233c40] pgd=00000000bffff003, pud=00000000bfffe003,
pmd=00000000ba8b8003, pte=0000000000000000
 Internal error: Oops: 96000047 [#2] PREEMPT SMP
 ...
 Call trace:
  __memcpy+0x74/0x180
  ufshcd_issue_devman_upiu_cmd+0x250/0x3c0
  ufshcd_exec_raw_upiu_cmd+0xfc/0x1a8
  ufs_bsg_request+0x178/0x3b0
  bsg_queue_rq+0xc0/0x118
  blk_mq_dispatch_rq_list+0xb0/0x538
  blk_mq_sched_dispatch_requests+0x18c/0x1d8
  __blk_mq_run_hw_queue+0xb4/0x118
  blk_mq_run_work_fn+0x28/0x38
  process_one_work+0x1ec/0x470
  worker_thread+0x48/0x458
  kthread+0x130/0x138
  ret_from_fork+0x10/0x1c
 Code: 540000ab a8c12027 a88120c7 a8c12027 (a88120c7)
 ---[ end trace 793e1eb5dff69f2d ]---
 note: kworker/0:2H[2054] exited with preempt_count 1

This patch is to move "descriptor = NULL" down to below the label
"out_unlock".

Fixes: d44a5f98bb49b2(ufs: query descriptor API)
Link: https://lore.kernel.org/r/20191112223436.27449-3-huobean@gmail.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: rpaphp: Fix up pointer to first drc-info entry

[ Upstream commit 9723c25f99aff0451cfe6392e1b9fdd99d0bf9f0 ]

The first entry of the ibm,drc-info property is an int encoded count
of the number of drc-info entries that follow. The "value" pointer
returned by of_prop_next_u32() is still pointing at the this value
when we call of_read_drc_info_cell(), but the helper function
expects that value to be pointing at the first element of an entry.

Fix up by incrementing the "value" pointer to point at the first
element of the first drc-info entry prior.

Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-5-git-send-email-tyreld@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: zorro_esp: Limit DMA transfers to 65536 bytes (except on Fastlane)

[ Upstream commit 02f7e9f351a9de95577eafdc3bd413ed1c3b589f ]

When using this driver on a Blizzard 1260, there were failures whenever DMA
transfers from the SCSI bus to memory of 65535 bytes were followed by a DMA
transfer of 1 byte. This caused the byte at offset 65535 to be overwritten
with 0xff. The Blizzard hardware can't handle single byte DMA transfers.

Besides this issue, limiting the DMA length to something that is not a
multiple of the page size is very inefficient on most file systems.

It seems this limit was chosen because the DMA transfer counter of the ESP
by default is 16 bits wide, thus limiting the length to 65535 bytes.
However, the value 0 means 65536 bytes, which is handled by the ESP and the
Blizzard just fine. It is also the default maximum used by esp_scsi when
drivers don't provide their own dma_length_limit() function.

The limit of 65536 bytes can be used by all boards except the Fastlane. The
old driver used a limit of 65532 bytes (0xfffc), which is reintroduced in
this patch.

Fixes: b7ded0e8b0d1 ("scsi: zorro_esp: Limit DMA transfers to 65535 bytes")
Link: https://lore.kernel.org/r/20191112175523.23145-1-jongk@linux-m68k.org
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Reviewed-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences

[ Upstream commit 6c6d59e0fe5b86cf273d6d744a6a9768c4ecc756 ]

Coverity reported the following:

*** CID 101747:  Null pointer dereferences  (FORWARD_NULL)
/drivers/scsi/lpfc/lpfc_els.c: 4439 in lpfc_cmpl_els_rsp()
4433      kfree(mp);
4434      }
4435      mempool_free(mbox, phba->mbox_mem_pool);
4436      }
4437     out:
4438      if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
vvv     CID 101747:  Null pointer dereferences  (FORWARD_NULL)
vvv     Dereferencing null pointer "shost".
4439      spin_lock_irq(shost->host_lock);
4440      ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
4441      spin_unlock_irq(shost->host_lock);
4442
4443      /* If the node is not being used by another discovery thread,
4444       * and we are sending a reject, we are done with it.

Fix by adding a check for non-null shost in line 4438.
The scenario when shost is set to null is when ndlp is null.
As such, the ndlp check present was sufficient. But better safe
than sorry so add the shost check.

Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 101747 ("Null pointer dereferences")
Fixes: 2e0fef85e098 ("[SCSI] lpfc: NPIV: split ports")

CC: James Bottomley <James.Bottomley@SteelEye.com>
CC: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
CC: linux-next@vger.kernel.org
Link: https://lore.kernel.org/r/20191111230401.12958-3-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: ili210x - handle errors from input_mt_init_slots()

[ Upstream commit 43f06a4c639de8ee89fc348a9a3ecd70320a04dd ]

input_mt_init_slots() may fail and we need to handle such failures.

Tested-by: Adam Ford <aford173@gmail.com> #imx6q-logicpd
Tested-by: Sven Van Asbroeck <TheSven73@gmail.com> # ILI2118A variant
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iomap: fix return value of iomap_dio_bio_actor on 32bit systems

[ Upstream commit e9f930ac88a8936ccc2d021110c98810cf5aa810 ]

Naresh reported LTP diotest4 failing for 32bit x86 and arm -next
kernels on ext4. Same problem exists in 5.4-rc7 on xfs.

The failure comes down to:
  openat(AT_FDCWD, "testdata-4.5918", O_RDWR|O_DIRECT) = 4
  mmap2(NULL, 4096, PROT_READ, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f7b000
  read(4, 0xb7f7b000, 4096)              = 0 // expects -EFAULT

Problem is conversion at iomap_dio_bio_actor() return. Ternary
operator has a return type and an attempt is made to convert each
of operands to the type of the other. In this case "ret" (int)
is converted to type of "copied" (unsigned long). Both have size
of 4 bytes:
    size_t copied = 0;
    int ret = -14;
    long long actor_ret = copied ? copied : ret;

    On x86_64: actor_ret == -14;
    On x86   : actor_ret == 4294967282

Replace ternary operator with 2 return statements to avoid this
unwanted conversion.

Fixes: 4721a6010990 ("iomap: dio data corruption and spurious errors when pipes fill")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: stm32f7: fix & reorder remove & probe error handling

[ Upstream commit 53aaaa5d9b1e95eb40e877fbffa6f964a8394bb7 ]

Add missing dma channels free calls in case of error during probe
and reorder the remove function so that dma channels are freed after
the i2c adapter is deleted.
Overall, reorder the remove function so that probe error handling order
and remove function order are same.

Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/arm-smmu-v3: Don't display an error when IRQ lines are missing

[ Upstream commit f7aff1a93f52047739af31072de0ad8d149641f3 ]

Since commit 7723f4c5ecdb ("driver core: platform: Add an error message
to platform_get_irq*()"), platform_get_irq_byname() displays an error
when the IRQ isn't found. Since the SMMUv3 driver uses that function to
query which interrupt method is available, the message is now displayed
during boot for any SMMUv3 that doesn't implement the combined
interrupt, or that implements MSIs.

[   20.700337] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ combined not found
[   20.706508] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ eventq not found
[   20.712503] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ priq not found
[   20.718325] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ gerror not found

Use platform_get_irq_byname_optional() to avoid displaying a spurious
error.

Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long

[ Upstream commit 6fcbcec9cfc7b3c6a2c1f1a23ebacedff7073e0a ]

Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu
fractions as signed 64-bit int, filters negative values and then reports
lower half as signed 32-bit int.

Result may looks like:

fs.quota.allocated_dquots = 22327
fs.quota.cache_hits = -489852115
fs.quota.drops = -487288718
fs.quota.free_dquots = 22083
fs.quota.lookups = -486883485
fs.quota.reads = 22327
fs.quota.syncs = 335064
fs.quota.writes = 3088689

Values bigger than 2^31-1 reported as negative.

All counters except "allocated_dquots" and "free_dquots" are monotonic,
thus they should be reported as is without filtering negative values.

Kernel doesn't have generic helper for 64-bit sysctl yet,
let's use at least unsigned long.

Link: https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-direct: check for overflows on 32 bit DMA addresses

[ Upstream commit b12d66278dd627cbe1ea7c000aa4715aaf8830c8 ]

As seen on the new Raspberry Pi 4 and sta2x11's DMA implementation it is
possible for a device configured with 32 bit DMA addresses and a partial
DMA mapping located at the end of the address space to overflow. It
happens when a higher physical address, not DMAable, is translated to
it's DMA counterpart.

For example the Raspberry Pi 4, configurable up to 4 GB of memory, has
an interconnect capable of addressing the lower 1 GB of physical memory
with a DMA offset of 0xc0000000. It transpires that, any attempt to
translate physical addresses higher than the first GB will result in an
overflow which dma_capable() can't detect as it only checks for
addresses bigger then the maximum allowed DMA address.

Fix this by verifying in dma_capable() if the DMA address range provided
is at any point lower than the minimum possible DMA address on the bus.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip: ingenic: Error out if IRQ domain creation failed

[ Upstream commit 52ecc87642f273a599c9913b29fd179c13de457b ]

If we cannot create the IRQ domain, the driver should fail to probe
instead of succeeding with just a warning message.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1570015525-27018-3-git-send-email-zhouyanjie@zoho.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary

[ Upstream commit 27eebb60357ed5aa6659442f92907c0f7368d6ae ]

If the 'brcm,irq-can-wake' property is specified, make sure we also
enable the corresponding parent interrupt we are attached to.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191024201415.23454-4-f.fainelli@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: clk-gpio: propagate rate change to parent

[ Upstream commit fc59462c5ce60da119568fac325c92fc6b7c6175 ]

For an external clock source, which is gated via a GPIO, the
rate change should typically be propagated to the parent clock.

The situation where we are requiring this propagation, is when an
external clock is connected to override an internal clock (which typically
has a fixed rate). The external clock can have a different rate than the
internal one, and may also be variable, thus requiring the rate
propagation.

This rate change wasn't propagated until now, and it's unclear about cases
where this shouldn't be propagated. Thus, it's unclear whether this is
fixing a bug, or extending the current driver behavior. Also, it's unsure
about whether this may break any existing setups; in the case that it does,
a device-tree property may be added to disable this flag.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lkml.kernel.org/r/20191108071718.17985-1-alexandru.ardelean@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: Allow constant ratio freq tables for rcg

[ Upstream commit efd164b5520afd6fb2883b68e0d408a7de29c491 ]

Some RCGs (the gfx_3d_src_clk in msm8998 for example) are basically just
some constant ratio from the input across the entire frequency range.  It
would be great if we could specify the frequency table as a single entry
constant ratio instead of a long list, ie:

{ .src = P_GPUPLL0_OUT_EVEN, .pre_div = 3 },
        { }

So, lets support that.

We need to fix a corner case in qcom_find_freq() where if the freq table
is non-null, but has no frequencies, we end up returning an "entry" before
the table array, which is bad.  Then, we need ignore the freq from the
table, and instead base everything on the requested freq.

Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191031185715.15504-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: smd: Add missing pnoc clock

[ Upstream commit ba1d366de261981c0dd04fac44d2ce3a5eba2eaa ]

When MSM8998 support was added, and analysis was done to determine what
clocks would be consumed.  That analysis had a flaw, which caused the
pnoc to be skipped.  The pnoc clock needs to be on to access the uart
for the console.  The clock is on from boot, but has no consumer votes
in the RPM.  When we attempt to boot the modem, it causes the RPM to
turn off pnoc, which kills our access to the console and causes CPU hangs.

We need pnoc to be defined, so that clk_smd_rpm_handoff() will put in
an implicit vote for linux and prevent issues when booting modem.
Hopefully pnoc can be consumed by the interconnect framework in future
so that Linux can rely on explicit votes.

Fixes: 6131dc81211c ("clk: qcom: smd: Add support for MSM8998 rpm clocks")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lkml.kernel.org/r/20191107190615.5656-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to update dir's i_pino during cross_rename

[ Upstream commit 2a60637f06ac94869b2e630eaf837110d39bf291 ]

As Eric reported:

RENAME_EXCHANGE support was just added to fsstress in xfstests:

commit 65dfd40a97b6bbbd2a22538977bab355c5bc0f06
Author: kaixuxia <xiakaixu1987@gmail.com>
Date:   Thu Oct 31 14:41:48 2019 +0800

    fsstress: add EXCHANGE renameat2 support

This is causing xfstest generic/579 to fail due to fsck.f2fs reporting errors.
I'm not sure what the problem is, but it still happens even with all the
fs-verity stuff in the test commented out, so that the test just runs fsstress.

generic/579 23s ...  [10:02:25]
[    7.745370] run fstests generic/579 at 2019-11-04 10:02:25
_check_generic_filesystem: filesystem on /dev/vdc is inconsistent
(see /results/f2fs/results-default/generic/579.full for details)
 [10:02:47]
Ran: generic/579
Failures: generic/579
Failed 1 of 1 tests
Xunit report: /results/f2fs/results-default/result.xml

Here's the contents of 579.full:

_check_generic_filesystem: filesystem on /dev/vdc is inconsistent
*** fsck.f2fs output ***
[ASSERT] (__chk_dots_dentries:1378)  --> Bad inode number[0x24] for '..', parent parent ino is [0xd10]

The root cause is that we forgot to update directory's i_pino during
cross_rename, fix it.

Fixes: 32f9bc25cbda0 ("f2fs: support ->rename2()")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix duplicate unreg_rpi error in port offline flow

[ Upstream commit 7cfd5639d99bec0d27af089d0c8c114330e43a72 ]

If the driver receives a login that is later then LOGO'd by the remote port
(aka ndlp), the driver, upon the completion of the LOGO ACC transmission,
will logout the node and unregister the rpi that is being used for the
node.  As part of the unreg, the node's rpi value is replaced by the
LPFC_RPI_ALLOC_ERROR value.  If the port is subsequently offlined, the
offline walks the nodes and ensures they are logged out, which possibly
entails unreg'ing their rpi values.  This path does not validate the node's
rpi value, thus doesn't detect that it has been unreg'd already.  The
replaced rpi value is then used when accessing the rpi bitmask array which
tracks active rpi values.  As the LPFC_RPI_ALLOC_ERROR value is not a valid
index for the bitmask, it may fault the system.

Revise the rpi release code to detect when the rpi value is the replaced
RPI_ALLOC_ERROR value and ignore further release steps.

Link: https://lore.kernel.org/r/20191105005708.7399-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix unexpected error messages during RSCN handling

[ Upstream commit 2332e6e475b016e2026763f51333f84e2e6c57a3 ]

During heavy RCN activity and log_verbose = 0 we see these messages:

  2754 PRLI failure DID:521245 Status:x9/xb2c00, data: x0
  0231 RSCN timeout Data: x0 x3
  0230 Unexpected timeout, hba link state x5

This is due to delayed RSCN activity.

Correct by avoiding the timeout thus the messages by restarting the
discovery timeout whenever an rscn is received.

Filter PRLI responses such that severity depends on whether expected for
the configuration or not. For example, PRLI errors on a fabric will be
informational (they are expected), but Point-to-Point errors are not
necessarily expected so they are raised to an error level.

Link: https://lore.kernel.org/r/20191105005708.7399-5-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: tracing: Fix handling of TRANSFER LENGTH == 0 for READ(6) and WRITE(6)

[ Upstream commit f6b8540f40201bff91062dd64db8e29e4ddaaa9d ]

According to SBC-2 a TRANSFER LENGTH field of zero means that 256 logical
blocks must be transferred. Make the SCSI tracing code follow SBC-2.

Fixes: bf8162354233 ("[SCSI] add scsi trace core functions and put trace points")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20191105215553.185018-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jbd2: Fix statistics for the number of logged blocks

[ Upstream commit 015c6033068208d6227612c878877919f3fcf6b6 ]

jbd2 statistics counting number of blocks logged in a transaction was
wrong. It didn't count the commit block and more importantly it didn't
count revoke descriptor blocks. Make sure these get properly counted.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-13-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: iomap that extends beyond EOF should be marked dirty

[ Upstream commit 2e9b51d78229d5145725a481bb5464ebc0a3f9b2 ]

This patch addresses what Dave Chinner had discovered and fixed within
commit: 7684e2c4384d. This changes does not have any user visible
impact for ext4 as none of the current users of ext4_iomap_begin()
that extend files depend on IOMAP_F_DIRTY.

When doing a direct IO that spans the current EOF, and there are
written blocks beyond EOF that extend beyond the current write, the
only metadata update that needs to be done is a file size extension.

However, we don't mark such iomaps as IOMAP_F_DIRTY to indicate that
there is IO completion metadata updates required, and hence we may
fail to correctly sync file size extensions made in IO completion when
O_DSYNC writes are being used and the hardware supports FUA.

Hence when setting IOMAP_F_DIRTY, we need to also take into account
whether the iomap spans the current EOF. If it does, then we need to
mark it dirty so that IO completion will call generic_write_sync() to
flush the inode size update to stable storage correctly.

Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/8b43ee9ee94bee5328da56ba0909b7d2229ef150.1572949325.git.mbobrowski@mbobrowski.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: update direct I/O read lock pattern for IOCB_NOWAIT

[ Upstream commit 548feebec7e93e58b647dba70b3303dcb569c914 ]

This patch updates the lock pattern in ext4_direct_IO_read() to not
block on inode lock in cases of IOCB_NOWAIT direct I/O reads. The
locking condition implemented here is similar to that of 942491c9e6d6
("xfs: fix AIM7 regression").

Fixes: 16c54688592c ("ext4: Allow parallel DIO reads")
Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/c5d5e759f91747359fbd2c6f9a36240cf75ad79f.1572949325.git.mbobrowski@mbobrowski.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>