Krzysztof Kozlowski [Fri, 3 Feb 2023 16:48:54 +0000 (17:48 +0100)]
arm64: dts: qcom: sc8280xp: correct LPASS GPIO gpio-ranges
The SC8280XP LPASS pin controller has GPIOs 0-18, so correct the number
of GPIOs in gpio-ranges.
Fixes:
c18773d162a6 ("arm64: dts: qcom: sc8280xp: add SoundWire and LPASS")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203164854.390080-5-krzysztof.kozlowski@linaro.org
Petr Vorel [Fri, 3 Feb 2023 10:09:52 +0000 (11:09 +0100)]
arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators
Enable pm8994_s1, pm8994_l{26,29,30,32} regulators.
Use values from downstream kernel on bullhead rev 1.01.
NOTE: downstream kernel on angler rev 1.01 differences:
* pm8994_l29: regulator-min-microvolt = <2700000>
* pm8994_l{20,28,31}: use regulator-boot-on
Verification:
[ 1.832460] s1: Bringing 0uV into 1025000-1025000uV
...
[ 2.057667] l26: Bringing 0uV into 987500-987500uV
...
[ 2.075722] l29: Bringing 0uV into 2800000-2800000uV
[ 2.076604] l30: Bringing 0uV into 1800000-1800000uV
[ 2.082431] l31: Bringing 0uV into 1262500-1262500uV
[ 2.095767] l32: Bringing 0uV into 1800000-1800000uV
Fixes:
f3b2c99e73be ("arm64: dts: Enable onboard SDHCI on msm8992")
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Jamie Douglass <jamiemdouglass@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203100952.13857-1-pvorel@suse.cz
Krzysztof Kozlowski [Thu, 2 Feb 2023 10:44:52 +0000 (11:44 +0100)]
arm64: dts: qcom: sm6115: correct TLMM gpio-ranges
Correct the number of GPIOs in TLMM pin controller.
Fixes:
97e563bf5ba1 ("arm64: dts: qcom: sm6115: Add basic soc dtsi")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Iskren Chernev <me@iskren.info>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202104452.299048-11-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 2 Feb 2023 10:44:51 +0000 (11:44 +0100)]
arm64: dts: qcom: msm8953: correct TLMM gpio-ranges
Correct the number of GPIOs in TLMM pin controller.
Fixes:
9fb08c801923 ("arm64: dts: qcom: Add MSM8953 device tree")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202104452.299048-10-krzysztof.kozlowski@linaro.org
Jamie Douglass [Thu, 2 Feb 2023 05:48:19 +0000 (16:48 +1100)]
arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions
The memory region reserved by a previous commit (see fixes tag below)
overlaps with the SMEM and MPSS memory regions, causing error messages in
dmesg:
OF: reserved mem: OVERLAP DETECTED!
reserved@5000000 (0x0000000005000000--0x0000000007200000)
overlaps with smem_region@6a00000
(0x0000000006a00000--0x0000000006c00000)
OF: reserved mem: OVERLAP DETECTED!
reserved@6c00000 (0x0000000006c00000--0x0000000007200000)
overlaps with memory@7000000
(0x0000000007000000--0x000000000ca00000)
This patch resolves both of these by splitting the previously reserved
memory region into two sections either side of the SMEM region and by
cutting off the second memory region to 0x7000000.
Fixes:
22c7e1a0fa45 ("arm64: dts: msm8992-bullhead: add memory hole region")
Signed-off-by: Jamie Douglass <jamiemdouglass@gmail.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202054819.16079-1-jamiemdouglass@gmail.com
Krzysztof Kozlowski [Wed, 1 Feb 2023 15:43:20 +0000 (16:43 +0100)]
arm64: dts: qcom: sm8350-hdk: correct LT9611 pin function
SM8350 pin controller does not have "normal" pin function, so use
"gpio".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes:
d96d8f9192be ("arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201154321.276419-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 1 Feb 2023 15:43:19 +0000 (16:43 +0100)]
arm64: dts: qcom: sm8350-hdk: align pin config node names with bindings
Bindings expect pins to be named with certain pattern.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes:
d96d8f9192be ("arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201154321.276419-1-krzysztof.kozlowski@linaro.org
Luca Weiss [Mon, 23 Jan 2023 13:29:51 +0000 (14:29 +0100)]
arm64: dts: qcom: sm6350: Use specific qmpphy compatible
The sc7180 phy compatible works fine for some cases, but it turns out
sm6350 does need proper phy configuration in the driver, so use the
newly added sm6350 compatible.
Because the sm6350 compatible is using the new binding, we need to
change the node quite a bit to match it.
This fixes qmpphy init when no USB cable is plugged in during bootloader
stage.
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120-sm6350-usbphy-v4-3-4d700a90ba16@fairphone.com
Bhupesh Sharma [Sat, 21 Jan 2023 20:04:54 +0000 (01:34 +0530)]
arm64: dts: qcom: sm6115: Add smp2p nodes
Add the adsp, cdsp and modem smp2p nodes to sm6115.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230121200454.1423567-1-bhupesh.sharma@linaro.org
Luca Weiss [Fri, 20 Jan 2023 13:13:47 +0000 (14:13 +0100)]
arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
Enable the CCI busses that have cameras connected to them.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213-sm6350-cci-v2-4-15c2c14c34bb@fairphone.com
Luca Weiss [Fri, 20 Jan 2023 13:13:46 +0000 (14:13 +0100)]
arm64: dts: qcom: sm6350: Add CCI nodes
Add nodes for the two CCI blocks found on SM6350.
The first contains two i2c busses and while the second one might also
contains two busses, the downstream kernel only has one configured, and
some boards use the GPIOs for the potential cci1_i2c1 one other
purposes, so leave that one unconfigured.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213-sm6350-cci-v2-3-15c2c14c34bb@fairphone.com
Luca Weiss [Fri, 20 Jan 2023 13:13:45 +0000 (14:13 +0100)]
arm64: dts: qcom: sm6350: Add camera clock controller
Add a node for the camcc found on SM6350 SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213-sm6350-cci-v2-2-15c2c14c34bb@fairphone.com
Bjorn Andersson [Thu, 9 Feb 2023 04:09:15 +0000 (20:09 -0800)]
Merge branch '
20221213152617.296426-1-konrad.dybcio@linaro.org' into HEAD
Merge DT binding to gain Camera clock defines for SM6350
Konrad Dybcio [Tue, 13 Dec 2022 15:26:15 +0000 (16:26 +0100)]
dt-bindings: clock: add QCOM SM6350 camera clock bindings
Add device tree bindings for camera clock controller for
Qualcomm Technology Inc's SM6350 SoC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213152617.296426-1-konrad.dybcio@linaro.org
Krzysztof Kozlowski [Thu, 19 Jan 2023 10:54:34 +0000 (11:54 +0100)]
arm64: dts: qcom: sm8350: fixup SDHCI interconnect arguments
After switching interconnects to 2 cells, the SDHCI interconnects need
to get one more argument.
Fixes:
4f287e31ff5f ("arm64: dts: qcom: sm8350: Use 2 interconnect cells")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119105434.51635-1-krzysztof.kozlowski@linaro.org
Richard Acayan [Wed, 1 Feb 2023 01:00:19 +0000 (20:00 -0500)]
arm64: dts: qcom: sdm670: add interconnects
The interconnects for Snapdragon 670 can be controlled. Add their
corresponding nodes in the device tree.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201010020.84586-2-mailingradian@gmail.com
Jianhua Lu [Tue, 31 Jan 2023 12:35:15 +0000 (20:35 +0800)]
arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro
Add support for Xiaomi Mi Pad 5 Pro, codename is xiaomi-elish.
This commit brings support for:
* ADSP/CDSP/SLPI/VENUS
* Backlight
* Battery fuel gauge
* Framebuffer
* PCIe0
* USB2.0
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230131123515.833-2-lujianhua000@gmail.com
Andrew Halaney [Mon, 30 Jan 2023 15:48:23 +0000 (09:48 -0600)]
arm64: dts: qcom: sa8540p-ride: Document i2c busses
It isn't obvious in the current devicetree what is connected. Go ahead
and document what's on the other end.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130154823.117542-2-ahalaney@redhat.com
Andrew Halaney [Mon, 30 Jan 2023 15:48:22 +0000 (09:48 -0600)]
arm64: dts: qcom: sa8540p-ride: Fix some i2c pinctrl settings
Some of the pinctrl groups were invalid for the selected pins. Select
the proper qup group to fix these warnings:
[ 6.523566] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio135" for function "qup15"
[ 6.535042] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio136" for function "qup15"
[ 6.597536] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio158" for function "qup15"
[ 6.597544] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio159" for function "qup15"
[ 6.597991] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio0" for function "qup15"
[ 6.597996] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio1" for function "qup15"
Fixes:
e073899ec3e1 ("arm64: dts: qcom: sa8540p-ride: add i2c nodes")
Reviewed-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130154823.117542-1-ahalaney@redhat.com
Abel Vesa [Fri, 27 Jan 2023 13:14:41 +0000 (15:14 +0200)]
arm64: dts: qcom: sm8550: Fix the aoss_qmp node name
The proper name for it is power-management. Currently, with the node
name being power-controller, the bindings check fails due to the
property #power-domain-cells missing.
Fixes:
ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127131441.1157679-1-abel.vesa@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 12:18:43 +0000 (13:18 +0100)]
arm64: dts: qcom: sm8550-mtp: correct vdd-l5-l16-supply
Fix typo in vdd-l5-l16 supply of qcom,pm8550-rpmh-regulators.
Fixes:
71342fb91eae ("arm64: dts: qcom: Add base SM8550 MTP dts")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127121843.349738-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:55:13 +0000 (12:55 +0100)]
arm64: dts: qcom: sm8550: add specific SMMU compatible
Generic SMMU compatibles are not allowed alone and we expect specific
one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127115513.268843-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:47 +0000 (12:43 +0100)]
arm64: dts: qcom: sm8450: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-11-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:46 +0000 (12:43 +0100)]
arm64: dts: qcom: sm8350: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-10-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:45 +0000 (12:43 +0100)]
arm64: dts: qcom: sm8250: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-9-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:44 +0000 (12:43 +0100)]
arm64: dts: qcom: sm8150: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-8-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:43 +0000 (12:43 +0100)]
arm64: dts: qcom: sm7225: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-7-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:42 +0000 (12:43 +0100)]
arm64: dts: qcom: sdm845: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:41 +0000 (12:43 +0100)]
arm64: dts: qcom: sc8280xp: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:40 +0000 (12:43 +0100)]
arm64: dts: qcom: sc7180: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 27 Jan 2023 11:43:39 +0000 (12:43 +0100)]
arm64: dts: qcom: sa8295p-adp: align RPMh regulator nodes with bindings
Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-3-krzysztof.kozlowski@linaro.org
Amit Pundir [Fri, 27 Jan 2023 06:33:55 +0000 (12:03 +0530)]
arm64: dts: qcom: sdm845-xiaomi-beryllium: Add reserved memory region
Put cont splash memory region under the reserved-memory as
confirmed by the downstream code for both Tianma and EBBG variants.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127063355.1775246-1-amit.pundir@linaro.org
Caleb Connolly [Wed, 25 Jan 2023 23:18:28 +0000 (23:18 +0000)]
arm64: dts: qcom: sdm845-oneplus-*: add audio devices
Populate the audio devices found on the OnePlus 6 and 6T using the
sdm845-sndcard driver.
Both devices have the earpiece and headphone jack connected to the
WCD9341 codec. The OnePlus 6 uses the MAX98927 speaker codec which is
already supported upstream. The OnePlus 6T uses a currently unsupported
TFA9894 codec.
Two internal microphones are supported, as well as an external headset
mic. Each DAI link is expected to be used for a single device.
Alsa UCM2 configs for this setup can be found here, they are not yet
upstream and include support for call audio which is missing in this
patch
https://gitlab.com/sdm845-mainline/alsa-ucm-conf/-/tree/
9ed12836b269764c4a853411d38ccb6abb70b383/ucm2/OnePlus
Co-developed-by: Dylan Van Assche <me@dylanvanassche.be>
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230125231829.2621768-1-caleb.connolly@linaro.org
Krzysztof Kozlowski [Mon, 23 Jan 2023 08:43:00 +0000 (09:43 +0100)]
arm64: dts: qcom: sdm845-audio-wcd9340: commonize clocks
Clock for WCD9340 is coming from the SoC and is the same in all users,
so move it to common file to reduce the code duplication (which still
allows further customizations per board).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 23 Jan 2023 08:42:59 +0000 (09:42 +0100)]
arm64: dts: qcom: sdm845-audio-wcd9340: commonize pinctrl
Pin configuration fow WCD9340 is the same in all users, so move it to
common file to reduce the code duplication (which still allows further
customizations per board).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 23 Jan 2023 08:42:58 +0000 (09:42 +0100)]
arm64: dts: qcom: sdm845: move codec to separate file
Re-organize SDM845 audio codec into separate, audio DTSI which
should be included and customized by the SDM845 boards wanting audio.
The codec node is anyway not a property of the SoC, but the boards.
On all others boards not using audio, keep the Slimbus node disabled as
it is empty.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 23 Jan 2023 08:42:57 +0000 (09:42 +0100)]
arm64: dts: qcom: sdm850-lenovo-yoga: correct sound compatible
There is dedicated compatible for Lenovo Yoga C630 sound card
(documented in bindings and used by Linux driver), so use it along with
a generic sound card fallback. The device is actually fully compatible
with the generic one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 23 Jan 2023 08:42:56 +0000 (09:42 +0100)]
arm64: dts: qcom: sdm845-xiaomi-beryllium: add generic sound compatible
Use generic sound card fallback compatible, because the device is
actually fully compatible with the generic one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 23 Jan 2023 08:42:55 +0000 (09:42 +0100)]
arm64: dts: qcom: sdm845-db845c: add generic sound compatible
Use generic sound card fallback compatible, because the device is
actually fully compatible with the generic one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-1-krzysztof.kozlowski@linaro.org
Konrad Dybcio [Tue, 24 Jan 2023 16:46:16 +0000 (17:46 +0100)]
arm64: dts: qcom: sm8250: Disable wsamacro and swr0 by default
They are not used on all boards, so disable them by default.
Enable them back on MTP/RB5, which were the only current users.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124164616.228619-1-konrad.dybcio@linaro.org
Krzysztof Kozlowski [Tue, 24 Jan 2023 08:49:51 +0000 (09:49 +0100)]
arm64: dts: qcom: sm8550: drop incorrect cells from serial
The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.
Fixes:
377972ac743f ("arm64: dts: qcom: sm8550: add I2C Master Hub nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 24 Jan 2023 08:49:50 +0000 (09:49 +0100)]
arm64: dts: qcom: sm8450: drop incorrect cells from serial
The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.
Fixes:
f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node")
Fixes:
5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 24 Jan 2023 08:49:49 +0000 (09:49 +0100)]
arm64: dts: qcom: sm8350: drop incorrect cells from serial
The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.
Fixes:
cf03cd7e12bd ("arm64: dts: qcom: sm8350: Set up WRAP0 QUPs")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 24 Jan 2023 08:49:48 +0000 (09:49 +0100)]
arm64: dts: qcom: use generic node name for Bluetooth
Node names should be generic (as Devicetree spec mandates), so use
"bluetooth" for BT node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-1-krzysztof.kozlowski@linaro.org
Konrad Dybcio [Mon, 23 Jan 2023 20:05:52 +0000 (21:05 +0100)]
arm64: dts: qcom: sm8450: Fix DSIn PHY compatible
Use the correct compatible so that the driver can probe properly.
Fixes:
a6dd1206e45a ("arm64: dts: qcom: sm8450: add display hardware devices")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123200552.553181-1-konrad.dybcio@linaro.org
Robert Marko [Mon, 23 Jan 2023 10:16:31 +0000 (11:16 +0100)]
arm64: dts: qcom: ipq8074: add QFPROM node
IPQ8074 has efuses like other Qualcomm SoC-s that are required for
determining various HW quirks which will be required later for CPR etc,
so lets add the QFPROM node for start.
Individidual fuses will be added as they are required.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123101631.475712-2-robimarko@gmail.com
Johan Hovold [Mon, 23 Jan 2023 10:16:07 +0000 (11:16 +0100)]
arm64: dts: qcom: sm8550: fix USB-DP PHY resets
The USB-DP PHY resets have been switched.
Fixes:
7f7e5c1b037f ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123101607.2413-1-johan+linaro@kernel.org
Dmitry Baryshkov [Fri, 20 Jan 2023 06:14:16 +0000 (08:14 +0200)]
arm64: dts: qcom: msm8996: add CBF device entry
Add device tree node for the CBF clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120061417.2623751-8-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Fri, 20 Jan 2023 06:14:15 +0000 (08:14 +0200)]
arm64: dts: qcom: msm8996 switch from RPM_SMD_BB_CLK1 to RPM_SMD_XO_CLK_SRC
The vendor kernel uses RPM_SMD_XO_CLK_SRC clock as an CXO clock rather
than using the RPM_SMD_BB_CLK1 directly. Follow this example and switch
msm8996.dtsi to use RPM_SMD_XO_CLK_SRC clock instead of RPM_SMB_BB_CLK1.
Fixes:
2b8c9c77c268 ("arm64: dts: qcom: msm8996: convert xo_board to RPM_SMD_BB_CLK1")
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120061417.2623751-7-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Thu, 19 Jan 2023 14:43:26 +0000 (16:43 +0200)]
arm64: dts: qcom: msm8996: enable UFS interconnects
Specify interconnects to be used by the UFS host controller.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119144326.2492847-3-dmitry.baryshkov@linaro.org
Bhupesh Sharma [Thu, 19 Jan 2023 12:32:00 +0000 (18:02 +0530)]
arm64: dts: qcom: sm6115: Add watchdog node to dtsi
Add watchdog node in Qualcomm sm6115 SoC dtsi.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119123200.1021735-1-bhupesh.sharma@linaro.org
Krzysztof Kozlowski [Thu, 19 Jan 2023 12:22:05 +0000 (13:22 +0100)]
arm64: dts: qcom: sc7280-idp: drop incorrect properties
The sound card does not expose DAIs and does not use custom qcom
properties, so drop '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh' and
'qcom,msm-mbhc-hphl-swh':
sc7280-idp.dtb: sound: '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh', 'qcom,msm-mbhc-hphl-swh' do not match any of the regexes: '^dai-link@[0-9a-f]$', 'pinctrl-[0-9]+'
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119122205.73372-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 19 Jan 2023 12:22:04 +0000 (13:22 +0100)]
arm64: dts: qcom: sc7280-herobrine-audio-wcd9385: drop incorrect properties
The sound card does not expose DAIs and does not use custom qcom
properties, so drop '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh' and
'qcom,msm-mbhc-hphl-swh':
sc7280-herobrine-crd.dtb: sound: '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh', 'qcom,msm-mbhc-hphl-swh' do not match any of the regexes: '^dai-link@[0-9a-f]$', 'pinctrl-[0-9]+'
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119122205.73372-1-krzysztof.kozlowski@linaro.org
Konrad Dybcio [Thu, 19 Jan 2023 10:16:44 +0000 (11:16 +0100)]
arm64: dts: qcom: sm6115: Use 64 bit addressing
SM6115's SMMU uses 36bit VAs, which is a good indicator that we
should increase (dma-)ranges - and by extension #address- and
#size-cells to prevent things from getting lost in translation
(both literally and figuratively). Do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119101644.10711-2-konrad.dybcio@linaro.org
Konrad Dybcio [Thu, 19 Jan 2023 10:16:43 +0000 (11:16 +0100)]
arm64: dts: qcom: sm6115: Add mdss_ prefix to mdss nodes
Add a mdss_ prefix to mdss nodes to keep them all near each other
when referencing them by label in device DTs.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119101644.10711-1-konrad.dybcio@linaro.org
Yang Xiwen [Sat, 14 Jan 2023 06:38:46 +0000 (14:38 +0800)]
arm64: dts: qcom: msm8916-thwc: Add initial device trees
This commit adds support for the ufi-001C and uf896 WiFi/LTE dongle made by
Tong Heng Wei Chuang based on MSM8916.
uf896 is another variant for the usb stick. The board design
differs by using different gpios for the keys and leds.
Note: The original firmware does not support 64-bit OS. It is necessary
to flash 64-bit TZ firmware to boot arm64.
Currently supported:
- All CPU cores
- Buttons
- LEDs
- Modem
- SDHC
- USB Device Mode
- UART
Co-developed-by: Jaime Breva <jbreva@nayarsystems.com>
Signed-off-by: Jaime Breva <jbreva@nayarsystems.com>
Co-developed-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Yang Xiwen <forbidden405@foxmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bhupesh Sharma [Wed, 8 Feb 2023 12:27:18 +0000 (17:57 +0530)]
arm64: dts: qcom: sm6115: Add geni debug uart node for qup0
qup0 on sm6115 / sm4250 has 6 SEs, with SE4 as debug uart.
Add the debug uart node in sm6115 dtsi file.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208122718.338545-1-bhupesh.sharma@linaro.org
Krzysztof Kozlowski [Mon, 6 Feb 2023 15:07:44 +0000 (16:07 +0100)]
arm64: dts: qcom: sm8550: add GPR and LPASS pin controller
Add the ADSP GPR (Generic Packet Router) and LPASS LPI (Low Power Audio
SubSystem Low Power Island) pin controller nodes used as part of audio
subsystem on SM8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[bjorn: Shortened stream mask, per Konrad's request]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206150744.513967-1-krzysztof.kozlowski@linaro.org
Rajendra Nayak [Fri, 16 Dec 2022 11:29:18 +0000 (16:59 +0530)]
arm64: dts: qcom: sc7280: Add a herobrine CRD Pro SKU
Some of the qualcomm qcard based herobrine devices can come with
a Pro variant of the chipset on the qcard. Such Pro qcards have
the smps9 from pm8350c ganged up with smps7 and smps8, so add a
.dtsi for pro skus that deletes the smps9 node and include it from
the new dts for the CRD Pro
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216112918.1243-2-quic_rjendra@quicinc.com
Konrad Dybcio [Fri, 3 Feb 2023 14:23:09 +0000 (15:23 +0100)]
arm64: dts: qcom: sm8450-nagara: Correct firmware paths
Nagara is definitely not SM8350, fix it!
Fixes:
c53532f7825c ("arm64: dts: qcom: pdx223: correct firmware paths")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203142309.1106349-1-konrad.dybcio@linaro.org
Dmitry Baryshkov [Wed, 18 Jan 2023 03:20:24 +0000 (05:20 +0200)]
arm64: dts: qcom: sm8350: use qcom,sm8350-dsi-ctrl compatibles
Add the per-SoC (qcom,sm8350-dsi-ctrl) compatible strings to DSI nodes
to follow the pending DSI bindings changes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230118032024.1715857-1-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Wed, 18 Jan 2023 03:17:18 +0000 (05:17 +0200)]
arm64: dts: qcom: sc8280xp: add p1 register blocks to DP nodes
Per DT bindings add p1 register blocks to all DP controllers on SC8280XP
platform.
Fixes:
6f299ae7f96d ("arm64: dts: qcom: sc8280xp: add p1 register blocks to DP nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230118031718.1714861-4-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Wed, 18 Jan 2023 03:17:17 +0000 (05:17 +0200)]
arm64: dts: qcom: sc8280xp-crd: drop #sound-dai-cells from eDP node
The eDP device doesn't provide sound DAI. Drop corresponding property
from the eDP node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230118031718.1714861-3-dmitry.baryshkov@linaro.org
Melody Olvera [Thu, 12 Jan 2023 21:07:22 +0000 (13:07 -0800)]
arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs
Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000
SoCs.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112210722.6234-3-quic_molvera@quicinc.com
Melody Olvera [Thu, 12 Jan 2023 21:07:21 +0000 (13:07 -0800)]
arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs
Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
to boot to shell with console on these SoCs.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112210722.6234-2-quic_molvera@quicinc.com
Bjorn Andersson [Mon, 30 Jan 2023 19:10:59 +0000 (13:10 -0600)]
Merge branch '
20230112204446.30236-2-quic_molvera@quicinc.com' into arm64-for-6.3
Merge DT binding in order to get GCC clock defines.
Bjorn Andersson [Tue, 31 Jan 2023 16:01:18 +0000 (10:01 -0600)]
Merge branch 'icc-qdu1000-immutable' of https://git./linux/kernel/git/djakov/icc into HEAD
Merge DT binding to gain interconnect defines.
Konrad Dybcio [Fri, 20 Jan 2023 21:01:00 +0000 (22:01 +0100)]
arm64: dts: qcom: sm8350: Hook up DSI1 to MDP
Somehow DSI1 was not hooked up to MDP resulting in it not working.
Fix it.
Fixes:
d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-8-konrad.dybcio@linaro.org
Konrad Dybcio [Fri, 20 Jan 2023 21:00:59 +0000 (22:00 +0100)]
arm64: dts: qcom: sm8350: Add mdss_ prefix to DSIn out labels
Add the mdss_ prefix to DSIn labels, so that the hardware blocks can
be organized near each other while retaining the alphabetical order
in device DTs when referencing by label.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-7-konrad.dybcio@linaro.org
Konrad Dybcio [Fri, 20 Jan 2023 21:00:58 +0000 (22:00 +0100)]
arm64: dts: qcom: sm8350: Fix DSI PLL size
As downstream indicates, DSI PLL is actually 0x27c and not 0x260-
wide. Fix that to reserve the correct registers.
Fixes:
d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-6-konrad.dybcio@linaro.org
Konrad Dybcio [Fri, 20 Jan 2023 21:00:57 +0000 (22:00 +0100)]
arm64: dts: qcom: sm8350: Fix DSI PHY compatibles
The compatibles were wrong, resulting in the driver not probing. Fix
that.
Fixes:
d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-5-konrad.dybcio@linaro.org
Konrad Dybcio [Fri, 20 Jan 2023 21:00:56 +0000 (22:00 +0100)]
arm64: dts: qcom: sm8350: Feed DSI1 PHY clocks to DISPCC
This was omitted but is necessary for DSI1 to function. Fix it.
Fixes:
d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-4-konrad.dybcio@linaro.org
Konrad Dybcio [Fri, 20 Jan 2023 21:00:55 +0000 (22:00 +0100)]
arm64: dts: qcom: sm8350: Fix DSI1 interrupt
The interrupt was wrong, likely copypasted from DSI0. Fix it.
Fixes:
d4a4410583ed ("arm64: dts: qcom: sm8350: Add display system nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-3-konrad.dybcio@linaro.org
Konrad Dybcio [Fri, 20 Jan 2023 21:00:54 +0000 (22:00 +0100)]
arm64: dts: qcom: sm8350: Add missing #address/size-cells to DSIn
Panels/DRM bridges definitely don't need 64bits of address space and
are usually not 32-bit wide. Set address-cells to 1 and size-cells to
0.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-2-konrad.dybcio@linaro.org
Sibi Sankar [Tue, 17 Jan 2023 08:58:40 +0000 (14:28 +0530)]
arm64: dts: qcom: sc7280: Add a carveout for modem metadata
Add a new carveout for modem metadata on SC7280 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-12-quic_sibis@quicinc.com
Sibi Sankar [Tue, 17 Jan 2023 08:58:39 +0000 (14:28 +0530)]
arm64: dts: qcom: sc7180: Add a carveout for modem metadata
Add a new carveout for modem metadata on SC7180 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-11-quic_sibis@quicinc.com
Sibi Sankar [Tue, 17 Jan 2023 08:58:38 +0000 (14:28 +0530)]
arm64: dts: qcom: sdm845: Add a carveout for modem metadata
Add a new carveout for modem metadata on SDM845 SoCs.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-10-quic_sibis@quicinc.com
Sibi Sankar [Tue, 17 Jan 2023 08:58:37 +0000 (14:28 +0530)]
arm64: dts: qcom: msm8998: Add a carveout for modem metadata
Add a new carveout for modem metadata on MSM8998 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-9-quic_sibis@quicinc.com
Sibi Sankar [Tue, 17 Jan 2023 08:58:36 +0000 (14:28 +0530)]
arm64: dts: qcom: msm8996: Add a carveout for modem metadata
Add a new carveout for modem metadata on MSM8996 SoCs.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-8-quic_sibis@quicinc.com
Robert Marko [Fri, 13 Jan 2023 16:44:49 +0000 (17:44 +0100)]
arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names
Current PCIe QMP PHY output name were changed in ("arm64: dts: qcom: Fix
IPQ8074 PCIe PHY nodes") however it did not account for the fact that GCC
driver is relying on the old names to match them as they are being used as
the parent for the gcc_pcie0_pipe_clk and gcc_pcie1_pipe_clk.
This broke parenting as GCC could not find the parent clock, so fix it by
changing to the names that driver is expecting.
Fixes:
942bcd33ed45 ("arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-9-robimarko@gmail.com
Robert Marko [Fri, 13 Jan 2023 16:44:48 +0000 (17:44 +0100)]
arm64: dts: qcom: ipq8074: fix Gen3 PCIe node
IPQ8074 comes in 2 silicon versions:
* v1 with 2x Gen2 PCIe ports and QMP PHY-s
* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s
v2 is the final and production version that is actually supported by the
kernel, however it looks like PCIe related nodes were added for the v1 SoC.
Finish the PCIe fixup by using the correct compatible, adding missing ATU
register space, declaring max-link-speed, use correct ranges, add missing
clocks and resets.
Fixes:
33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-8-robimarko@gmail.com
Robert Marko [Fri, 13 Jan 2023 16:44:44 +0000 (17:44 +0100)]
arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed
Add the generic 'max-link-speed' property to describe the Gen2 PCIe link
generation limit.
This allows the generic DWC code to configure the link speed correctly.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-4-robimarko@gmail.com
Robert Marko [Fri, 13 Jan 2023 16:44:43 +0000 (17:44 +0100)]
arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges
Current ranges property set in Gen2 PCIe node is incorrect, replace it
with the downstream 5.4 QCA kernel value.
Fixes:
33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-3-robimarko@gmail.com
Robert Marko [Fri, 13 Jan 2023 16:44:42 +0000 (17:44 +0100)]
arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY
IPQ8074 comes in 2 silicon versions:
* v1 with 2x Gen2 PCIe ports and QMP PHY-s
* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s
v2 is the final and production version that is actually supported by the
kernel, however it looks like PCIe related nodes were added for the v1 SoC.
Now that we have Gen3 QMP PHY support, we can start fixing the PCIe support
by fixing the Gen3 QMP PHY node first.
Change the compatible to the Gen3 QMP PHY, correct the register space start
and size, add the missing misc PCS register space.
Fixes:
33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-2-robimarko@gmail.com
Robert Marko [Fri, 13 Jan 2023 16:44:41 +0000 (17:44 +0100)]
arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY
Serdes register space sizes are incorrect, update them to match the
actual sizes from downstream QCA 5.4 kernel.
Fixes:
942bcd33ed45 ("arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113164449.906002-1-robimarko@gmail.com
Krzysztof Kozlowski [Fri, 13 Jan 2023 14:52:31 +0000 (15:52 +0100)]
arm64: dts: qcom: sdm845-db845c: drop label from I2C controllers
Geni I2C Controller node does not allow a "label" property and Linux
driver does not parse it:
sdm845-db845c.dtb: i2c@a8c000: Unevaluated properties are not allowed ('label' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113145231.79280-1-krzysztof.kozlowski@linaro.org
Dmitry Baryshkov [Fri, 13 Jan 2023 12:05:44 +0000 (14:05 +0200)]
arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input
In some cases the driver might need using GPLL0 to drive CPU clocks.
Bring it in through the sys_apcs_aux clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113120544.59320-15-dmitry.baryshkov@linaro.org
Melody Olvera [Thu, 12 Jan 2023 20:44:45 +0000 (12:44 -0800)]
dt-bindings: clock: Add QDU1000 and QRU1000 GCC clocks
Add device tree bindings for global clock controller on QDU1000 and
QRU1000 SoCs.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112204446.30236-2-quic_molvera@quicinc.com
Manivannan Sadhasivam [Wed, 11 Jan 2023 12:30:04 +0000 (18:00 +0530)]
arm64: dts: qcom: sm8450: Allow both GIC-ITS and internal MSI controller
The devicetree should specify both MSI implementations and the OS/driver
should choose the one based on the platform requirements. Currently, Linux
DWC driver will choose GIC-ITS over the internal MSI controller.
Fixes:
a11bbf6adef4 ("arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111123004.21048-2-manivannan.sadhasivam@linaro.org
Abel Vesa [Thu, 19 Jan 2023 00:45:33 +0000 (02:45 +0200)]
arm64: dts: qcom: sm8550-mtp: Add USB PHYs and HC nodes
Enable USB HC and PHYs nodes on SM8550 MTP board.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119004533.1869870-3-abel.vesa@linaro.org
Abel Vesa [Thu, 19 Jan 2023 00:45:32 +0000 (02:45 +0200)]
arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes
Add USB host controller and PHY nodes.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119004533.1869870-2-abel.vesa@linaro.org
Krzysztof Kozlowski [Mon, 9 Jan 2023 11:22:21 +0000 (12:22 +0100)]
arm64: dts: qcom: sm8250: drop unused properties from tx-macro
Neither qcom,sm8250-lpass-tx-macro bindings nor the driver use
"clock-frequency" and address/size cells properties.
sm8250-mtp.dtb: txmacro@3220000: Unevaluated properties are not allowed ('clock-frequency', '#address-cells', '#size-cells' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109112221.102473-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 9 Jan 2023 11:22:20 +0000 (12:22 +0100)]
arm64: dts: qcom: sm8250: drop unused clock-frequency from wsa-macro
Neither qcom,sm8250-lpass-wsa-macro bindings nor the driver use
"clock-frequency" property.
sm8250-hdk.dtb: codec@3240000: Unevaluated properties are not allowed ('clock-frequency' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109112221.102473-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 9 Jan 2023 11:22:19 +0000 (12:22 +0100)]
arm64: dts: qcom: align OPP table node name with DT schema
Bindings expect OPP tables to start with "opp-table".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109112221.102473-2-krzysztof.kozlowski@linaro.org
Dmitry Baryshkov [Mon, 9 Jan 2023 05:14:01 +0000 (07:14 +0200)]
arm64: dts: qcom: rename mdp nodes to display-controller
Follow the schema change and rename mdp nodes to generic name
'display-controller'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109051402.317577-6-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 9 Jan 2023 05:13:59 +0000 (07:13 +0200)]
arm64: dts: qcom: rename mdss nodes to display-subsystem
Follow the schema change and rename mdss nodes to generic name
'display-subsystem'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109051402.317577-4-dmitry.baryshkov@linaro.org
Dmitry Baryshkov [Mon, 9 Jan 2023 05:01:52 +0000 (07:01 +0200)]
arm64: dts: qcom: add SoC specific compat strings to mdp5 nodes
Add SoC-specific compat string to the MDP5 device nodes to ease
distinguishing between various platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109050152.316606-5-dmitry.baryshkov@linaro.org
Robert Marko [Sun, 8 Jan 2023 13:04:40 +0000 (14:04 +0100)]
arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names
It seems that clock-output-names for the USB3 QMP PHY-s where set without
actually checking what is the GCC clock driver expecting, so clock core
could never actually find the parents for usb0_pipe_clk_src and
usb1_pipe_clk_src clocks in the GCC driver.
So, correct the names to be what the driver expects so that parenting
works.
Before:
gcc_usb0_pipe_clk_src 0 0 0
125000000 0 0 50000 Y
gcc_usb1_pipe_clk_src 0 0 0
125000000 0 0 50000 Y
After:
usb3phy_0_cc_pipe_clk 1 1 0
125000000 0 0 50000 Y
usb0_pipe_clk_src 1 1 0
125000000 0 0 50000 Y
gcc_usb0_pipe_clk 1 1 0
125000000 0 0 50000 Y
usb3phy_1_cc_pipe_clk 1 1 0
125000000 0 0 50000 Y
usb1_pipe_clk_src 1 1 0
125000000 0 0 50000 Y
gcc_usb1_pipe_clk 1 1 0
125000000 0 0 50000 Y
Fixes:
5e09bc51d07b ("arm64: dts: ipq8074: enable USB support")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230108130440.670181-2-robimarko@gmail.com
Siddharth Manthan [Sat, 7 Jan 2023 14:19:11 +0000 (19:19 +0500)]
arm64: dts: qcom: Add device tree for Samsung Galaxy Tab A 8.0 (2015)
Galaxy Tab A 8.0 is a tablet, very similar to Tab A 9.7 with major
differences being the display and touchscreen.
Add it's devicetree reusing a common dtsi from gt510.
Signed-off-by: Siddharth Manthan <siddharth.manthan@gmail.com>
[Squashed multiple commits]
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107141911.47229-4-nikita@trvn.ru
Jasper Korten [Sat, 7 Jan 2023 14:19:10 +0000 (19:19 +0500)]
arm64: dts: qcom: Add device tree for Samsung Galaxy Tab A 9.7 (2015)
The Galaxy Tab A 9.7 (2015) is a Snapdragon 410 based tablet.
This commit introduces basic support for the tablet including the
following features:
- SDHCI (internal and external storage)
- USB Device Mode
- UART
- Regulators
- WCNSS (WiFi/BT)
- GPIO keys
- Fuel gauge
- Touchscreen
- Accelerometer
Part of the DT is split out into a common dtsi since the tablet shares
majority of the design with another variant having a different screen
size.
Signed-off-by: Jasper Korten <jja2000@gmail.com>
Co-developed-by: Siddharth Manthan <siddharth_manthan@outlook.com>
Signed-off-by: Siddharth Manthan <siddharth_manthan@outlook.com>
Co-developed-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107141911.47229-3-nikita@trvn.ru
projects / platform / kernel / linux-rpi.git / log