staging: comedi: addi_apci_16xx: board does not have digital inputs

The boards supported by this driver do not have digital inputs.
Remove the subdevice init for them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_16xx: board does not have analog outputs

The boards supported by this driver do not have analog outputs.
Remove the subdevice init for them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_16xx: board does not have analog inputs

The boards supported by this driver do not have analog inputs.
Remove the subdevice init for them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_16xx: separate from addi_common.c

This driver is for two simple ttl digital output boards. One with
48 channels the other with 96. Using the addi-data "common" code
introduces a lot of bloat.

Copy the code in addi_common.c to this driver and remove the #include
that caused addi_common.c to be compiled with this driver. This will
allow removing the bloat.

Rename the auto_attach and detach functions so they have namespace
associated with this driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2032: use addi_watchdog module

Use the addi_watchdog module to provide support for the watchdog
subdevice.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: introduce addi_watchdog driver

Many of the ADDI-DATA drivers have a "watchdog" subdevice that can
be used to monitor digital output activity. All the digital outputs
are released (set to 0) if the digital outputs are not accessed, or
the watchdog it not pinged, before the timeout of the watchdog
occurs. The only difference in the drivers for the watchdog subdevice
is the base address used to talk to the watchdog registers.

Instead of duplicating the code needed to support this watchdog,
introduce a helper module, similar to the 8255 module. This module
will be select'ed by the drivers that can use it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: cleanup digital output subdevice

The board supported by this driver always has a digital output subdevice.
Remove the boardinfo for it and just open-code the relevant data in the
subdevice init.

Remove the SDF_GROUND and SDF_COMMON from the subdevice 'subdev_flags'.
These flags only have meaning for analog input/output subdevices. Also,
remove the SDF_READABLE flag, it is not required by output only subdevices.

Remove the subdevice 'len_chanlist' initialization. This variable only
has meaning for subdevices that support asynchronous commands.

Remove the subdevice 'io_bits' initialization. Digital output subdevices
don't use this variable.

Remove the subdevice function pointers that evaluate to NULL based on the
boardinfo data.

Move the apci2200_do_insn_bits() function from the hwdrv_apci2200.c file
into the main driver file.

For aesthetic reasons, rename the #define used for the register used to
read/write the digital outputs..

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: cleanup digital input subdevice

The board supported by this driver always has a digital input subdevice.
Remove the boardinfo for it and just open-code the relevant data in the
subdevice init.

Remove the SDF_GROUND and SDF_COMMON from the subdevice 'subdev_flags'.
These flags only have meaning for analog input/output subdevices.

Remove the subdevice 'len_chanlist' initialization. This variable only
has meaning for subdevices that support asynchronous commands.

Remove the subdevice 'io_bits' initialization. Digital input subdevices
don't use this variable.

Remove the subdevice function pointers that evaluate to NULL based on the
boardinfo data.

Move the apci2200_di_insn_bits() function from the hwdrv_apci2200.c file
into the main driver file.

For aesthetic reasons, rename the #define used for the register used to
read the digital inputs.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: remove interrupt support code

This board does not have any interrupt capable devices. Remove the
unused interrupt support code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: remove use of devpriv->s_EeParameters

This driver no longer reads the eeprom to find the board specific data,
all the necessary data is in the boardinfo. Use the boardinfo directly
instead of passing it through devpriv->s_EeParameters.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: don't read the unused PCI bars

This driver only uses PCI bar 1 (dev->iobase), don't bother reading
the unused PCI bars.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: remove devpriv->iobase usage

The iobase address stored in devpriv->iobase is also stored in
dev->iobase. Use that instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: remove unnecessary info from boardinfo

Remove the information from the boardinfo that was only needed to
work out the usage of the PCI bars.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: simplify the PCI bar reading

The board supported by this driver has a 93x76 eeprom. Knowing this
information allows simplifying the code that reads the PCI bars to
get the iobase addresses.

Also, since the 'dw_AiBase' is not ioremap'ed we can remove the iounmap
in the detach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: absorb i_APCI2200_Reset()

This is the only 'reset' function used by the driver, remove it
from the boardinfo and absorb the code from hwdrv_apci2200.c into
the driver.

Rename the CamelCase function i_ADDI_Reset() to apci2200_reset().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: remove eeprom support code

Reading the eeprom on the board supported by this driver is not
necessary. All the information required is in the boardinfo.

Remove the eeprom support code since it's not really interesting
or useful.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: board does not have analog inputs

The board supported by this driver does not have analog inputs. Remove
the subdevice init for it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: board does not have analog outputs

The board supported by this driver does not have analog outputs. Remove
the subdevice init for it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: board does not have ttl i/o

The board supported by this driver does not have ttl i/o. Remove the
subdevice init for it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: separate from addi_common.c

This driver is for a simple 16 channel digital output (relays), 8 channel
digital input board. Using the addi-data "common" code introduces a lot
of bloat.

Copy the code in addi_common.c to this driver and remove the #include
that caused addi_common.c to be compiled with this driver. This will
allow removing the bloat.

Rename the auto_attach and detach functions so they have namespace
associated with this driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: cleanup vnt_manger.

Where appropriate replacing types defined in "type.h" with
linux/types.h.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: cleanup struct vnt_private

Where appropriate replacing types defined in "type.h" with
linux/types.h.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: staging: vt6656 change remaining to vnt_mgmt and remove typedef.

Use
struct vnt_manager

Move vnt_manager from sMgmtObj to vnt_mgmt.

and remove typedef from structures
vnt_private
vnt_manager
vnt_rx_mgmt
vnt_tx_mgmt

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: datarate/dpc/hostap/power use new structures.

Use
struct vnt_private
struct vnt_manager

Move vnt_manager from sMgmtObj to vnt_mgmt.

This patch cleans up function declarations, definitions and local variables
where appropriate replacing types defined in "type.h" with linux/types.h.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: change bssdb/rxtx/wpa2 to new structures

Use
struct vnt_private
struct vnt_manager

Move vnt_manager from sMgmtObj to vnt_mgmt.

This patch cleans up function declarations, definitions and local variables
where appropriate replacing types defined in "type.h" with linux/types.h.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: alarm-dev: Implement compat_ioctl support

Implement compat_ioctl support for the alarm-dev ioctl.

Cc: Serban Constantinescu <serban.constantinescu@arm.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Colin Cross <ccross@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: alarm-dev: Refactor alarm-dev ioctl code in prep for compat_ioctl

Cleanup the Android alarm-dev driver's ioctl code to refactor it
in preparation for compat_ioctl support.

Cc: Serban Constantinescu <serban.constantinescu@arm.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Colin Cross <ccross@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: alarm-dev: Drop pre Android 1.0 _OLD ioctls

Per Colin's comment:
"The "support old userspace code" comment for those two ioctls has
been there since pre-Android 1.0.  Those apis are not exposed to
Android apps, I don't see any problem deleting them."

Thus this patch removes the ANDROID_ALARM_SET_OLD and
ANDROID_ALARM_SET_AND_WAIT_OLD ioctl compatability
logic.

Cc: Serban Constantinescu <serban.constantinescu@arm.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Colin Cross <ccross@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi/ni_labpc_cs: Convert to module_comedi_pcmcia_driver

This patch removes the boring init/exit functions with the new
module_comedi_pcmcia_driver macro.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi/ni_daq_700: Convert to module_comedi_pcmcia_driver

This patch removes the boring init/exit functions with the new
module_comedi_pcmcia_driver macro.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi/das08_cs: Convert to module_comedi_pcmcia_driver

This patch removes the boring init/exit functions with the new
module_comedi_pcmcia_driver macro.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi/cb_das16_cs: Convert to module_comedi_pcmcia_driver

This patch removes the boring init/exit functions with the new
module_comedi_pcmcia_driver macro.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi/quatech_daqp_cs: Convert to module_comedi_pcmcia_driver

This patch removes the boring init/exit functions with the new
module_comedi_pcmcia_driver macro.

Also removed the superflous #ifdef MODULE

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi/ni_mio_cs: Convert to module_comedi_pcmcia_driver

This patch removes the boring init/exit functions with the new
module_comedi_pcmcia_driver macro.

Also removed the superflous #ifdef MODULE

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi/ni_daq_dio24: Convert to module_comedi_pcmcia_driver

This patch removes the boring init/exit functions with the new
module_comedi_pcmcia_driver macro.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/comedi: Add macro for registering a comedi PCMCIA driver

This patch introduces a new macro 'module_comedi_pcmcia_driver'
for comedi PCMCIA drivers which do not do anything special in module
init/exit. This eliminates a lot of boilerplate.

Adapted from 'module_comedi_pci_driver'

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: Comedi: ni_tio: Fixed spacing issue

Fixed coding style issue from spaces to tabs.

Signed-off-by: Jake Champlin <jake.champlin.27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: remove noise in comedi_buf_read_free()

If an attempt is made to free more bytes than have been allocated
a dev_info message is output and the number of bytes to free is
adjusted to the allocated size.

Telling the user this happened is just noise. Remove the message.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbobbi@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: remove noise in comedi_buf_write_free()

If an attempt is made to free more bytes than have been allocated
a dev_info message is output and the number of bytes to free is
adjusted to the allocated size.

Telling the user this happened is just noise. Remove the message.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbobbi@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: remove unreachable dev_warn in comedi_buf_munge()

Due to the 'while(count < num_bytes)' the computed 'block_size' will
always be a value greater than 0.

Remove the unreachable dev_warn and the (block_size < 0) test.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbobbi@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: remove BUG_ON in comedi_buf_munge()

The condition that would trigger this BUG_ON can never occur.

The 'munge_count' will be equal to 'buf_write_count' if all the data
in the buffer has been munged.

Or, the 'munge_count' will be less than the 'buf_write_count' if any
partial samples in the buffer were not munged.

The 'munge_count' will never be greater than the 'buf_write_count'.

Remove the unnecessary BUG_ON.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbobbi@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: reorder exported function prototypes

For aesthetic reasons, reorder the prototypes for the exported
comedi_buf_* functions in comedidev.h to follow the function
declarations in comedi_buf.c.

Also, change a couple of the return values from 'unsigned' to
'unsigned int' to match the value actually returned.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: don't expose comedi_buf_write_n_allocated()

This helper function is only called by the comedi core in comedi_buf.c
and comedi_fops.c. For aesthetic reasons, move it to comedi_buf.c and
remove the inline. Move the prototype from comedidev.h to comedi_internal.h
so it's not exposed outside the comedi core.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: don't expose comedi_buf_read_n_allocated()

This helper function is only called in comedi_buf.c. Move it there and
make it static so it's not exposed globally.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: clarify comedi_buf_read_free()

Reword the comment about the need for the smp_mb().

Clarify the check to make sure the number of bytes to free is not
more than the number of bytes allocated.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: clarify comedi_buf_read_alloc()

Clarify the check to make sure the number of bytes to allocate is
available.

Reword the comment about the need for the smp_rmb().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: cleanup comedi_buf_read_n_available()

For aesthetic reasons, cleanup this function a bit.

Change the (async == NULL) test to simply (!async).

Reword the comment about the need for the smp_rmb()..

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: clarify comedi_buf_write_free()

Use the helper comedi_buf_write_n_allocated() to clarify the check
to make sure the number of bytes to free is not more than the number
of bytes allocated.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: cleanup comedi_buf_munge()

Refactor this function so there is a single return point and only
one BUG_ON check. The BUG_ON needs to be looked at to see if it
can be safely removed.

Clarify the test in the munge loop that checks for a block copy
that would extend pass the end of the prealloc_buf.

Reword the comment about the need for the smp_wmb().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: remove comedi_buf_write_alloc_strict

This function is only called by comedi_buf_put(). Remove it and just
call __comedi_buf_write_alloc() directly with the strict flag set.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: factor out common comedi_buf_write_alloc_* code

The only difference between comedi_buf_write_alloc() and the *_strict()
version is that the *_strict() one will only allocate the chunk if it
can completely fulfill the request.

Factor out the common code and add a flag parameter to indicate the 'strict'
usage. Change the exported functions so they are just wrappers around the
common function.

Cleanup the common function a bit and use the comedi_buf_write_n_available()
helper to determine the number of bytes available.

comedi_buf_write_n_available() is not used outside this module so make it
static. Since the only caller is __comedi_buf_write_alloc(), which will
always have a valid async pointer and already has a memory barrier, we
can remove the unnecessary (async == NULL) test as well as the smp_mb().
Also, the rounding of the sample size can be removed since the caller
does not need it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: rename comedi_reset_async_buf()

For aesthetic reasons, rename this function to comedi_buf_reset(). This
makes all the asynchronous buffer functions have the same namespace.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: factor out new buffer allocation code

The function comedi_buf_alloc() first frees any allocated buffer then,
optionally, allocates a new buffer.

Factor out the new buffer allocation code to a new function. This
allows reducing the indent level and makes the code a bit cleaner.

Also, cleanup to factored out code to make it a bit more concise.
Use a local variable for the current comedi_buf_page being allocated.
This cleans up the ugly line breaks used to keep the lines < 80 chars.

Move the #ifdef'ery for the page protection determination out of the
vmap() call.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf: factor out common code to free the async buffer

The function comedi_buf_alloc() uses two loops to free the async buffer's
buf_page_list. The first one is used at the beginning to deallocate the
current buffer. The second is used to cleanup if the new buffer allocation
fails.

Factor out the common code to a new function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: separate out comedi_buf_* functions

Create a new file, comedi_buf.c, to hold all the comedi_async buffer
functions. Currently they are all in drivers.c and really don't have
any association with that source file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: deprecate loading firmware with comedi_config

All the comedi drivers have been converted to use the request_firmware()
hotplug interface. The COMEDI_DEVCONFIG ioctl support for passing the
firmware blob as 'aux_data' is no longer required.

Remove the feature and give the user a dev_warn message if it is
attempted.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: (core): add comedi_dev_from_file_info()

Setting `info = comedi_file_info_from_minor(minor)` and `dev =
comedi_dev_from_minor(minor)` in the same function is a bit of a waste.
The latter function is just a call of the former followed by a
conditional return of an embedded pointer (`info->device`) or NULL.  The
former function uses a spin-lock which is where the wastfulness comes
in.

Move the "followed by a conditional return of an embedded pointer" part
into a new function `comedi_dev_from_file_info` and call this instead of
`comedi_dev_from_minor()` in the places where
`comedi_file_info_from_minor()` is also called.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: remove unused code to handle iva_img

There is no way to specify the value of iva_img and since this code
is not being used, remove it.

This analysis resulted from a report by
Chen Gang <gang.chen@asianux.com>, mentioning that the existing code
was wrongly specifying the size to be copied.

Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: use scm functions to set boot address and mode

Instead of ioremapping SCM registers, use the correspondent layer
to write into them.

This allows us to get rid of a layer violation, since the registers
are no longer touched by driver code.

Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: fix uninitialized variable sym_name

On both counts, sym_name could be printed uninitialized, this
is solved by moving the pr_* statement to be triggered if the
value is assigned.

Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: fix memory corruption on long string names

The value allocated doesn't match the one that is meant to be
stored, resulting in corruption of memory for longer strings
that can't be held in such space.

Fix by allocating the correct byte value for the string meant to
be stored.

Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: fix potential array out of bounds write

The name of the firmware (drv_datap->base_img) could potentially
become equal to 255 valid characters (size of exec_file), this
will result in an out of bounds write, given that the 255 chars
along with a '\0' terminator will be copied into an array of
255 chars.

Produce an error on this cases, because the driver expects the NULL
ending to be among the 255 char limit.

Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: usbip: usbipcommon: Fixed single line bracing issue

Fixed coding style issue with single line braces.

Signed-off-by: Jake Champlin <jake.champlin.27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sb105x: clean up interface type test

IIR_RS232 is zero so "if (IIR_RS232 == (b_ret & IIR_RS232))" is always
true so RS232 was always chosen by default.  The test should be
"if (0 == (b_ret & 0x30)) { ".  The other tests should also be in that
format.

This does change how the code works...  If 0x30 is set then it now
defaults to RS232 instead of RS485.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sb105x: move dereference under IS_ERR() check

Avoid dereverencing the ERR_PTR() by shifting the dereference down a
couple lines.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Fix space-related checkpatch.pl warnings

This fixes all instances of
"Please, no spaces at start of a new line"
"Please, no spaces before tabs"

Please note that I probably got the warning names wrong,
but they should be close enough for usage here :)

Additional post-commit note: There is one comment on line 230ish in slic.h
that appears to have lost it's formatting. It was fine when I was working
in Geany, but it caught my eye in the below diff. Sorry if it actually happened!

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Fix three checkpatch.pl errors in slicoss.c

The errors fixed are all instances of
"ERROR: do not use assignment in if condition"

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Stop swearing in slicoss.c

I'm assuming that "CRC shit reg" is referencing the CRC register/registry.
Please ignore this patch if "shit" is actually in context

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: add a missing break statement

This is a static checker fix.  From the context it looks like there
should be a break here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Only configure regs if link state changes

Some config regs get set whenever adjust_link() is called. Change this
so that these registers only get set when the link state changes to UP.

Also remove unnecessary second assignment of boot_coma.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ipu-di: Change DI address info to dev_dbg

Currently when ipuv3 is probed we have:

imx-ipuv3 40000000.ipu: DI0 base: 0x5e040000 remapped to a08aa000
imx-ipuv3 40000000.ipu: DI1 base: 0x5e048000 remapped to a08ac000
imx-ipuv3 40000000.ipu: IPUv3EX probed

The DI base address and the remapped address are more interesting for debug
purposes, so mark this message as dev_dbg instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: copying more data than intended

This was changed to bcm_flash2x_cs_info instead of bcm_flash_cs_info
when we got rid of the typedefs.  bcm_flash2x_cs_info is quite a bit
larger than bcm_flash_cs_info (436 bytes instead of 96) so it would
corrupt user memory and it's an info leak.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: speakup: kobjects.c: checkpatch.pl fixes

Fixed two "line over 80 characters" warnings reported by checkpatch.pl

Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: speakup: keyhelp.c: checkpatch.pl fixes

Breaking 2 lines to fit 80 char limit

Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: speakup: buffers.c: checkpatch.pl fixes

Fixed two camel case issues.

Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omapdrm/omap_gem_dmabuf.c: fix memory leakage

There is a memory leakage in variable sg if it goes to error.

Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: imx-drm: ipu-common: Remove unused variable

Fix the following warning when building with W=1 option:

drivers/staging/imx-drm/ipu-v3/ipu-common.c: In function 'ipu_remove':
drivers/staging/imx-drm/ipu-v3/ipu-common.c:1145:19: warning: variable 'res' set but not used [-Wunused-but-set-variable]

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/omap: Add OMAP5 support

Add support for OMAP5 processor.  The main differences are that the OMAP5
has 2 containers, one for 1D and one for 2D.  Each container is 128MiB in
size.

Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/omap: Add PM capabilities

Added power management capabilities into the omapdrm and DMM drivers.
During suspend, we don't need to do anything to maintain the state of
the LUT.  We have all the necessary information to recreate the mappings
of the GEM object list maintained by the omapdrm driver.

On resume, the DMM resume handler will first reprogram the LUT to point
to the dummy page.  The subsequent resume handler in the omapdrm will call
into the DMM and reprogram each of the buffer objects.  This will ensure
that all of the necessary objects will be pinned into the DMM properly.

Order of suspend/resume handlers is done by device creation.  We create
the DMM device before the omapdrm, so the correct order is maintained.

Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: no braces needed for single statement if , for blocks

there is only one line inside the if and for blocks, so the braces are
not needed

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: s/kmalloc + memset / kzalloc

replace kmalloc and subsequent memset with kzalloc
and drop the null checks and casts and clean the coding style a bit too

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: checkpatch fixes

put opening brace in a new line
4 ---> 8 spaces

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: s/kmalloc + memset/kzalloc in alloc_rd_info

replace kmalloc and memset if the pointer is valid with kzalloc,
and remove the check around the null pointer cases as we dont need it.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zsmalloc: comment zs_create_pool function

Just as with zs_malloc() and zs_map_object(), it is worth
formally commenting the zs_create_pool() function.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: zcache: delete it

Dan Magenheimer says that it is now safe to delete zcache, so quick,
before he changes his mind, drop the thing on the floor and run
screaming away.

Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: drop zram_stat_dec/inc functions

It seems like an overkill to have adding and subtracting
1 functions from the 32bit counters. Just do it directly.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: show correct disksize

The ->disksize variable stores values in units of bytes,
print the correct size in Kb

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: simplify num_devices paramater

Simplify dealing with num_devices when initializing zram.
Also cleanup some of the output messages.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: fix GFP_KERNEL in spinlock context

Allowi() calls usb_submit_urb(pdx->pUrbCharIn, bInCallback ? GFP_ATOMIC : GFP_KERNEL)
under spin_lock_irqsave(&pdx->charInLock, flags). That means it should use GFP_ATOMIC anyway.
As soon as it is the only usage of bInCallback argument, the patch removes it at all.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: add a missing break statement

My static checker complains that there is a missing break statement
here.  From the context, it does look like a break statement was
intended.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: avoid CamelCase POD_* enums in pod.c

Fix the following checkpatch.pl warnings:

  WARNING: Avoid CamelCase: <POD_monitor_level>
  #4512: FILE: staging/line6/pod.c:41:
  +       POD_monitor_level  = 0x04,

  WARNING: Avoid CamelCase: <POD_system_invalid>
  #4513: FILE: staging/line6/pod.c:42:
  +       POD_system_invalid = 0x10000

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: rename MidiBuffer to avoid CamelCase

Fix checkpatch.pl warnings related to MidiBuffer:

  WARNING: Avoid CamelCase: <MidiBuffer>
  #947: FILE: staging/line6/driver.c:363:
  +       struct MidiBuffer *mb = &line6->line6midi->midibuf_in;

Rename MidiBuffer to midi_buffer.

Note that "midibuf" would be another good name but sound/oss/midibuf.c
already uses it for a different concept.  Avoid possible confusion by
using "midi_buffer" instead.

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: use pr_err() instead of printk(KERN_ERR, ...)

Fix the following checkpatch.pl warning:

  WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
  #1861: FILE: staging/line6/driver.h:56:
  +       printk(KERN_ERR "line6usb driver bug: missing case in %s:%d\n", \

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: wrap comment to 80 chars in driver.c

Fix the following checkpatch.pl warning:

  WARNING: line over 80 characters
  #1107: FILE: staging/line6/driver.c:523:
  +       /* Wait for data length. We'll get a couple of 0xff until length arrives. */

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: wrap lines to 80 chars in pod.c

Fix the following checkpatch.pl warnings:

  WARNING: line over 80 characters
  #4508: FILE: staging/line6/pod.c:37:
  +       /* POD_SYSEX_DUMPMEM2  = 0x76 */   /* dumps entire internal memory of PODxt Pro */

  WARNING: line over 80 characters
  #4630: FILE: staging/line6/pod.c:159:
  +               if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) == 0) {

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: drop ToneportSourceInfo CamelCase name

Fix the following checkpatch.pl warning:

  WARNING: Avoid CamelCase: <ToneportSourceInfo>
  #5383: FILE: staging/line6/toneport.c:90:
  +struct ToneportSourceInfo {

Since the struct is only used to define the global
toneport_source_info[] table, I have chosen to make the struct
anonymous and part of the table definition.

Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8712: remove unused definitions from ethernet.h

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8712: remove all NDIS_* definitions and use rndis.h instead

Remove duplicate code.The definitions are already in
include/linux/rndis.h

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8712: remove unused macros

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8712: replace min with min_t

I've changed the ugly casting here and used min_t() instead.  I
also changed the u16 to a u32 because ->network.Ssid.SsidLength
is 32 bits.  It doesn't make a difference, but truncating the
upper bits away is sloppy.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>