drm/amdgpu: schedule ras recovery when reaching bad page threshold(v2)

Once the bad page saved to eeprom reaches the configured
threshold, ras recovery will be issued to notify user.

v2: Fix spelling typo.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip bad page reservation once issuing from eeprom write

Once the ras recovery is issued from eeprom write itself,
bad page reservation should be ignored, otherwise, recursive
calling of writting to eeprom would happen.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: break driver init process when it's bad GPU(v5)

When retrieving bad gpu tag from eeprom, GPU init should
fail as the GPU needs to be retired for further check.

v2: Fix spelling typo, correct the condition to detect
    bad gpu tag and refine error message.

v3: Refine function argument name.

v4: Fix missing check of returning value of i2c
    initialization error case.

v5: Use dev_err to print PCI information in dmesg instead
    of DRM_ERROR.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add bad gpu tag definition

This tag will be hired for bad gpu detection in eeprom's access.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: validate bad page threshold in ras(v3)

Bad page threshold value should be valid in the range between
-1 and max records length of eeprom. It could determine when
saved bad pages exceed threshold value, and proceed corresponding
actions.

v2: When using the default typical value, it should be min
value between typical value and eeprom max records length.

v3: drop the case of setting bad_page_cnt_threshold to be
    0xFFFFFFFF, as it confuses user.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add bad page count threshold in module parameter(v3)

bad_page_threshold could be configured to enable/disable the
associated bad page retirement feature in RAS.

When it's -1, ras will use typical bad page failure value to
handle bad page retirement.

When it's 0, disable bad page retirement, and no bad page
will be recorded and saved.

For other valid value, driver will use this manual value
as the threshold value of totoal bad pages.

v2: correct documentation of this parameter.

v3: remove confused statement in documentation.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Replace bitmask with event idx in SMI event msg

Event bitmask is a 64-bit mask with only 1 bit set. Sending this
event bitmask in KFD SMI event message is both wasteful of memory
and potentially limiting to only 64 events. Instead send event
index in SMI event message.
Please note this change does not break the ABI for the two event
types defined so far. The new index is identical to the mask used
before.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: Fix NULL dereference in dpm sysfs handlers"

This regressed some working configurations so revert it.  Will
fix this properly for 5.9 and backport then.

This reverts commit 38e0c89a19fd13f28d2b4721035160a3e66e270b.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: enable GFXOFF for navy_flounder

Enable GFXOFF for navy_flounder.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm amdgpu: Skip tmr load for SRIOV

1. For Navi12, CHIP_SIENNA_CICHLID, skip tmr load operation;
2. Check pointer before release firmware.

v2: use CHIP_SIENNA_CICHLID instead
v3: remove local "bool ret"; fix grammer issue
v4: use my name instead of "root"
v5: fix grammer issue and indent issue

Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix PSP autoload twice in FLR

Assigning false to block->status.hw overwrites PSP's previous
hardware status, which causes the PSP to Resume operation after
hardware init.

Remove this assignment and let the PSP execute Resume operation
when it is told to.

v2: Remove the braces.
v3: Modify the description.

Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dc: Stop dma_resv_lock inversion in commit_tail

Trying to grab dma_resv_lock while in commit_tail before we've done
all the code that leads to the eventual signalling of the vblank event
(which can be a dma_fence) is deadlock-y. Don't do that.

Here the solution is easy because just grabbing locks to read
something races anyway. We don't need to bother, READ_ONCE is
equivalent. And avoids the locking issue.

v2: Also take into account tmz_surface boolean, plus just delete the
old code.

Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-rdma@vger.kernel.org
Cc: amd-gfx@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Remove unneeded cast from memory allocation

Remove casting the values returned by memory allocation function.

Coccinelle emits WARNING:

./drivers/gpu/drm/amd/powerplay/hwmgr/vega20_processpptables.c:893:37-46: WARNING: casting value returned by memory allocation function to (PPTable_t *) is useless.

Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Prevent kernel-infoleak in amdgpu_info_ioctl()

Compiler leaves a 4-byte hole near the end of `dev_info`, causing
amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace
when `size` is greater than 356.

In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which
unfortunately does not initialize that 4-byte hole. Fix it by using
memset() instead.

Cc: stable@vger.kernel.org
Fixes: c193fa91b918 ("drm/amdgpu: information leak in amdgpu_info_ioctl()")
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clear dm_state for fast updates

This patch fixes a race condition that causes a use-after-free during
amdgpu_dm_atomic_commit_tail. This can occur when 2 non-blocking commits
are requested and the second one finishes before the first. Essentially,
this bug occurs when the following sequence of events happens:

1. Non-blocking commit #1 is requested w/ a new dm_state #1 and is
deferred to the workqueue.

2. Non-blocking commit #2 is requested w/ a new dm_state #2 and is
deferred to the workqueue.

3. Commit #2 starts before commit #1, dm_state #1 is used in the
commit_tail and commit #2 completes, freeing dm_state #1.

4. Commit #1 starts after commit #2 completes, uses the freed dm_state
1 and dereferences a freelist pointer while setting the context.

Since this bug has only been spotted with fast commits, this patch fixes
the bug by clearing the dm_state instead of using the old dc_state for
fast updates. In addition, since dm_state is only used for its dc_state
and amdgpu_dm_atomic_commit_tail will retain the dc_state if none is found,
removing the dm_state should not have any consequences in fast updates.

This use-after-free bug has existed for a while now, but only caused a
noticeable issue starting from 5.7-rc1 due to 3202fa62f ("slub: relocate
freelist pointer to middle of object") moving the freelist pointer from
dm_state->base (which was unused) to dm_state->context (which is
dereferenced).

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207383
Fixes: bd200d190f45 ("drm/amd/display: Don't replace the dc_state for fast updates")
Reported-by: Duncan <1i5t5.duncan@cox.net>
Signed-off-by: Mazin Rezk <mnrzk@protonmail.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update GC golden setting for navy_flounder

Update GC golden setting for navy_flounder.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update driver if version for navy_flounder

It's in accordance with pmfw 65.5.0 for navy_flounder.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable umc 8.7 functions in gmc v10

add support for umc 8.7 initialization

add umc 8.7 source to makefile

Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip crit temperature values on APU (v2)

It doesn't expose PPTable descriptor on APU platform. So max/min
temperature values cannot be got from APU platform.

v2: Stoney needs to skip crit temperature as well.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DP Compliance tests 4.3.2.1 and 4.3.2.2

[Why]
Test expects that we also read HPD_IRQ_VECTOR when checking for
symbol loss as well lane status.

[How]
Read bytes 0x200-0x205 instead of just 0x202-0x205

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.96

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DSC Slice width debugfs write entry

[Why]
We need to be able to specify slice width for DSC on aconnector

[How]
Getting slice width parameter from debugfs entry, if it is
a valid the value is set in connector's dsc preffered settings
structure. Which then overwrites dsc_cfg structure's parameters
if DSC is decided to be enabled. Works for both SST and MST.

Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use hw lock mgr

[Why]
Feature requires synchronization of dig, pipe, and cursor locking
between driver and fw.

[How]
Set flag to force psr to use hw lock mgr.

Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dchubbub p-state warning during surface planes switch

[Why]
ramp_up_dispclk_with_dpp is to change dispclk, dppclk and dprefclk
according to bandwidth requirement. call stack: rv1_update_clocks -->
update_clocks --> dcn10_prepare_bandwidth / dcn10_optimize_bandwidth
--> prepare_bandwidth / optimize_bandwidth. before change dcn hw,
prepare_bandwidth will be called first to allow enough clock,
watermark for change, after end of dcn hw change, optimize_bandwidth
is executed to lower clock to save power for new dcn hw settings.

below is sequence of commit_planes_for_stream:
step 1: prepare_bandwidth - raise clock to have enough bandwidth
step 2: lock_doublebuffer_enable
step 3: pipe_control_lock(true) - make dchubp register change will
not take effect right way
step 4: apply_ctx_for_surface - program dchubp
step 5: pipe_control_lock(false) - dchubp register change take effect
step 6: optimize_bandwidth --> dc_post_update_surfaces_to_stream
for full_date, optimize clock to save power

at end of step 1, dcn clocks (dprefclk, dispclk, dppclk) may be
changed for new dchubp configuration. but real dcn hub dchubps are
still running with old configuration until end of step 5. this need
clocks settings at step 1 should not less than that before step 1.
this is checked by two conditions: 1. if (should_set_clock(safe_to_lower
, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) ||
new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz)
2. request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz

the second condition is based on new dchubp configuration. dppclk
for new dchubp may be different from dppclk before step 1.
for example, before step 1, dchubps are as below:
pipe 0: recout=(0,40,1920,980) viewport=(0,0,1920,979)
pipe 1: recout=(0,0,1920,1080) viewport=(0,0,1920,1080)
for dppclk for pipe0 need dppclk = dispclk

new dchubp pipe split configuration:
pipe 0: recout=(0,0,960,1080) viewport=(0,0,960,1080)
pipe 1: recout=(960,0,960,1080) viewport=(960,0,960,1080)
dppclk only needs dppclk = dispclk /2.

dispclk, dppclk are not lock by otg master lock. they take effect
after step 1. during this transition, dispclk are the same, but
dppclk is changed to half of previous clock for old dchubp
configuration between step 1 and step 6. This may cause p-state
warning intermittently.

[How]
for new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz, we
need make sure dppclk are not changed to less between step 1 and 6.
for new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz,
new display clock is raised, but we do not know ratio of
new_clocks->dispclk_khz and clk_mgr_base->clks.dispclk_khz,
new_clocks->dispclk_khz /2 does not guarantee equal or higher than
old dppclk. we could ignore power saving different between
dppclk = displck and dppclk = dispclk / 2 between step 1 and step 6.
as long as safe_to_lower = false, set dpclk = dispclk to simplify
condition check.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.26

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DSC Clock enable debugfs write entry

[Why]
Need a mechanism to force enable DSC on any connector

[How]
Debugfs entry overwrites newly added connector's dsc preffered
settings structure and sets dsc_clock_en flag on it.
During the attomic commit, depending if connector is SST or
MST, we will enable DSC manually by overwriting stream's DSC flag.

Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow asic specific FSFT timing optimization

[Why]
Each asic can optimize best based on its capabilities

[How]
Optimizing timing for a new pixel clock

Signed-off-by: Reza Amini <Reza.Amini@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable idle optimizations before programming DCN

[Why]
Programming DCN is explicitly forbidden during idle optimzations allowed
state. Existing implemenation relies on OS/DM, which is not robust. Instead
DC should sequence this.

Note that DC will not re-enter idle optimized state on its own, it is only
responsible for catching out of sequence calls. It is still DM
responsibility to sequence appropriate for optimized power, but this change
removes the requirement for DM to cover the .1% case.

[How]
 - elevate updates during idle optimized state to full updates
 - disable idle power optimizations prior to programming

Signed-off-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix dmesg warning from setting abm level

[Why]
Setting abm level does not correctly update CRTC state. As a result
no surface update is added to dc stream state and triggers warning.

[How]
Correctly update CRTC state when setting abm level property.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/si: initial support for GPU reset

Ported from radeon.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable SI support in the Kconfig (v2)

[Why]
All DCE6 specific code changes are guarded by CONFIG_DRM_AMD_DC_SI Kconfig option

[How]
(v1) CONFIG_DRM_AMD_DC_SI configuration option is added, default setting is disabled

(v2) Hainan is not supported, description updated accordingly

Tested with HD7750 (Cape Verde) and HD7950 (Tahiti)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable DC support for SI parts (v2)

[Why]
amdgpu_device.c requires changes for SI chipsets support
si.c require changes for Display Manager IP block enabling

[How]
amdgpu_device.c: add SI families in amdgpu_device_asic_has_dc_support()
si.c: changes in si_set_ip_blocks() for Display Manager IP blocks enablement

(v1) NOTE: As per Kaveri and older amdgpu.dc=1 kernel cmdline is required

(v2) fix for bc011f9350 ("drm/amdgpu: Change SI/CI gfx/sdma/smu init sequence")
     remove CHIP_HAINAN support since it does not have physical DCE6 module

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: create plane rotation property for Bonaire and later

[Why]
DCE6 chipsets do not support HW rotation

[How]
rotation property is created for Bonaire and later

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dc/dce60: use DCE6 headers (v6)

[Why]
With all DCE6 specific macros, register, masks in place
dce60_resource.c may use them and become independent from DCE8 headers

[How]
(v1) Changelog:
- use DCE6 headers for registers and masks, remove the DC8 headers
- remove 7th Display Controller/Encoder register instances (DCE6 has only 6)
- use DCE6 specific watermark programming registers (DPG_PIPE_ARBITRATION_CONTROL3)
- use DCE6 specific input pixel processing registers shift/mask
- use DCE6 specific transform registers shift/mask
- use DCE6 specific link encoder registers shift/mask
- use DCE6 specific output pixel processing registers shift/mask
- use DCE6 specific audio registers shift/mask
- use DCE6 specific dmcu registers shift/mask
- use DCE6 specific hwseq registers shift/mask
- use DCE6 specific mem input registers shift/mask

(v2) Changelog:
- use DCE6 ad hoc dce60_mem_input_construct() function
- use DCE6 ad hoc dce60_transform_construct() function

(v3) Changelog:
- use DCE6 ad hoc dce60_ipp_construct() function

(v4) Changelog:
- use DCE6 ad hoc dce60_link_encoder_construct() function

(v5) Changelog:
- use DCE6 ad hoc dce60_opp_construct() function

(v6) Changelog:
- use DCE6 ad hoc dce60_audio_create() function

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dce60_timing_generator: add DCE6 specific functions (v2)

[Why]
DCE6 has CRTC_PREFETCH_EN bit in CRTC_CONTROL register
DCE6 has no CRTC_LEGACY_REQUESTOR_EN bit in CRTC_START_LINE_CONTROL register
DCE6 has no CRTC_CRC_CNTL register

[How]
Modify dce60_timing_generator_enable_advanced_request() function
Add dce60_configure_crc() function and dce60_is_tg_enabled() kept as static
Use dce60_configure_crc() function in dce60_tg_funcs

v2: remove unused variable (Alex)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dce60_hw_sequencer: add DCE6 specific .cursor_lock

[Why]
kernel WARNING due to use of .cursor_lock = dce_pipe_control_lock inherited by dce110

[How]
DCE6 set .cursor_lock = dce60_pipe_control_lock

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dce60_hw_sequencer: add DCE6 specific functions (v2)

[Why]
DCE6 has no bottom_pipe and no Blender HW
DCE6 needs 'blank_target' set to false in order to turn on the display
DCE6 has a specific dce60_pipe_control_lock() fuction that is a no op

[How]
Add DCE6 specific functions with needed private dce60_* dependent fuctions
Comment DCE6 specific CTRC program visibility implementation
Fix a typo in the initial header includes comment 's/DCE8/DCE6/g'
Use dce60_apply_ctx_for_surface() in dce60_hw_sequencer_construct
Use dce60_pipe_control_lock() in dce60_hw_sequencer_construct

v2: add missing return type (Alex)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dce_transform: DCE6 Scaling Horizontal Filter Init (v2)

[Why]
DCE6 has specific SCL_HORZ_FILTER_INIT_{LUMA_RGB,CHROMA} registers
In DCE6 h_init_luma and h_init_chroma initialization is required
Some DCE6 specific SCL_{HORZ,VERT}_FILTER_CONTROL masks were not listed

[How]
Add the registers and masks in dce_transform.h
Add DCE6 specific struct sclh_ratios_inits in dce_transform.h
Add dce60_calculate_inits() function
Add dce60_program_scl_ratios_inits() function
Fix dce60_transform_set_scaler() function

v2: remove unused variable (Alex)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dce_transform: add DCE6 specific macros,functions

[Why]
DCE6 has no SCL_MODE and no SCL_{HORZ,VERT}_FILTER_INIT registers
DCE6 has no SCL_BOUNDARY_MODE bit in SCL_CONTROL register
DCE6 has Line Buffer programming registers (DC_LB_MEMORY_SPLIT,DC_LB_MEM_SIZE)
DCE6 DATA_FORMAT register has only INTERLEAVE_EN bit
DCE6 has no Out Clamp Control programming registers (OUT_CLAMP_CONTROL_*)

[How]
Add DCE6 specific macros definitions for XFM registers and masks
Add DCE6 specific registers to dce_transform_registers struct
Add DCE6 specific masks to dce_transform_mask struct
DCE6 XFM macros/structs changes will avoid buiding errors when using DCE6 headers
Add dce60_setup_scaling_configuration() w/o missing Scaling registers/bit programming
Add dce60_transform_set_scaler() using DCE6 Line Buffer programming registers
Add dce60_program_bit_depth_reduction() w/o Out Clamp Control programming
Add dce60_transform_set_pixel_storage_depth() use dce60_program_bit_depth_reduction()
Use dce60_transform_set_scaler() in dce60_transform_funcs
Use dce60_transform_set_pixel_storage_depth() in dce60_transform_funcs
Add DCE6 specific dce60_transform_construct

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dce_opp: add DCE6 specific macros,functions

[Why]
DCE6 has no FMT_TRUNCATE_MODE bit in FMT_BIT_DEPTH_CONTROL register
DCE6 has no FMT_CLAMP_COMPONENT_{R,G,B} registers
DCE6 has no FMT_SUBSAMPLING_{MODE,ORDER} bits in FMT_CONTROL register

[How]
Add DCE6 specific macros definitions for OPP registers and masks
DCE6 OPP macros will avoid buiding errors when using DCE6 headers
Add dce60_set_truncation() w/o FMT_TRUNCATE_MODE bit programming
Add dce60_opp_set_clamping() w/o Format Clamp Component programming
Add dce60_opp_program_fmt() w/o Format Subsampling bits programming
Add dce60_opp_program_bit_depth_reduction() with dce60_set_truncation
Use dce60_opp_program_fmt() in dce60_opp_funcs
Use dce60_opp_program_bit_depth_reduction() in dce60_opp_funcs
Add DCE6 specific dce60_opp_construct

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dce_mem_input: add DCE6 specific macros,functions (v2)

[Why]
DCE6 has DPG_PIPE_ARBITRATION_CONTROL3 register for Line Buffer watermark selection
DCE6 has STUTTER_EXIT_SELF_REFRESH_WATERMARK_MASK mask for Stutter watermark selection
DCE6 has NB_PSTATE_CHANGE_WATERMARK_MASK mask for North Bridge watermark selection
DCE6 has no GRPH_MICRO_TILE_MODE mask
DCE6 has no HW_ROTATION register

[How]
Add DCE6 specific macros definitions for MI registers and masks
Add DCE6 specific registers to dce_mem_input_registers struct
Add DCE6 specific masks to dce_mem_input_masks struct
DCE6 MI macros/structs changes will avoid buiding errors when using DCE6 headers
Add dce60_program_urgency_watermark() function
Add dce60_program_nbp_watermark() function
Add dce60_program_stutter_watermark() function
Add dce60_mi_program_display_marks() function w/ new DCE6 watermark programming
Add DCE6 specific tiling programming and modify DCE8 case
Add dce60_program_size() fuction w/o Rotation processing
Add dce60_mi_program_surface_config() fuction
Use dce60_mi_program_display_marks() in dce60_mi_funcs
Use dce60_mi_program_surface_config() in dce60_mi_funcs
Add DCE6 specific dce60_mem_input_construct

v2: remove unused variable (Alex)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dce_link_encoder: add DCE6 specific macros,functions

[Why]
DCE6 has no DP_DPHY_SCRAM_CNTL register

[How]
Add DCE6 specific macros definitions for LE registers
DCE6 LE macros will avoid buiding errors when using DCE6 headers
Add dce60_set_dp_phy_pattern_hbr2_compliance_cp2520_2() w/o Scramble Control programming
Add dce60_set_dp_phy_pattern_passthrough_mode() w/o Scramble Control programming
Add dce60_configure_encoder() w/o Scramble Control programming
Add dce60_link_encoder_enable_dp_output() w/ dce60_configure_encoder
Add dce60_link_encoder_enable_dp_mst_output() w/ dce60_configure_encoder
Add dce60_link_encoder_dp_set_phy_pattern() w/ dce60_set_dp_phy_pattern_passthrough_mode
Use dce60_link_encoder_enable_dp_output() in dce60_lnk_enc_funcs
Use dce60_link_encoder_enable_dp_mst_output() in dce60_lnk_enc_funcs
Use dce60_link_encoder_dp_set_phy_pattern() in dce60_lnk_enc_funcs
Add DCE6 specific dce60_link_encoder_construct

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dce_ipp: add DCE6 specific macros,functions

[Why]
DCE6 does not have CURSOR2_DEGAMMA_MODE bit in DEGAMMA_CONTROL register

[How]
Add DCE6 specific macros definitions for IPP masks
DCE6 IPP macros will avoid buiding errors when using DCE6 headers
Add dce60_ipp_set_degamma() function w/o Cursor2 Degamma programming
Use dce60_ipp_set_degamma() in ipp_funcs dce60_ipp_funcs
Add DCE6 specific dce60_ipp_construct

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dce_hwseq: add DCE6 specific macros,functions

[Why]
DCE6 has no BLND_CONTROL register for Blender HW programming
DCE6 has no BLND_V_UPDATE_LOCK register for Pipe Locking

[How]
Add DCE6 specific macros definitions for HWSEQ registers and masks
DCE6 HWSEQ macros will avoid buiding errors when using DCE6 headers
Add dce60_pipe_control_lock() stub with no op

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dce_dmcu: add DCE6 specific macros,functions

[Why]
DCE6 has no SMU_INTERRUPT_CONTROL register, but it's used for DCN10 and later

[How]
Add DCE6 specific macros definitions for DMCU registers and masks
DCE6 DMCU macros will avoid buiding errors when using DCE6 headers
There is no other change needed in dce_dcmu

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dce_audio: add DCE6 specific macros,functions

[Why]
DCE6 has no DCCG_AUDIO_DTO2_USE_512FBR_DTO mask in DCCG_AUDIO_DTO_SOURCE register

[How]
Add DCE6 specific macros definitions for AUD masks
DCE6 AUD macros will avoid buiding errors when using DCE6 headers
Add dce60_aud_wall_dto_setup() w/o 512*Fs programming
Use dce60_aud_wall_dto_setup() in dce60_funcs
Add DCE specific dce60_audio_create

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dc/dce60: set max_cursor_size to 64

[Why]
Issue in the Mouse cursor size in Linux Desktop Environments

[How]
In DCE6 dc->caps.max_cursor_size need to be set as 64 instead of 128

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dc/clk_mgr: add support for SI parts (v2)

(v1) Changelog

[Why]
After commit c69dd2d "drm/amd/display: Refactor clk_mgr functions"
dc/clk_mgr requires these changes to add SI parts support
Necessary to avoid hitting default: ASSERT(0); /* Unknown Asic */
that would cause kernel freeze

[How]
Add case statement for FAMILY_SI chipsets

(v2) Changelog

[Why]
DCE6 has no DPREFCLK_CNTL register

[How]
Add DCE6 specific macros definitions for CLK registers and masks
Add DCE6 specific dce60/dce60_clk_mgr.c for DCE6 customization
Code style: reuse all the public functions in dce100/dce_clk_mgr.h header
Code style: use dce60_* static functions as per other DCE implementations
Add dce60_get_dp_ref_freq_khz() w/o using DPREFCLK_CNTL register
Use dce60_get_dp_ref_freq_khz() function in dce60_funcs
Add DCE6 specific dce60_clk_mgr_construct
dc/clk_mgr/dce_clk_mgr.c: use dce60_clk_mgr_construct for FAMILY_SI chipsets
Add Makefile rules for dce60_clk_mgr.o target conditional to CONFIG_DRM_AMD_DC_SI

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: amdgpu_dm: add SI support (v4)

[Why]
amdgpu_dm.c requires changes for SI chipsets init and irq handlers registration

[How]
SI support: load_dmcu_fw(), amdgpu_dm_initialize_drm_device(), dm_early_init()
Add DCE6 specific dce60_register_irq_handlers() function

(v1) NOTE: As per Kaveri and older amdgpu.dc=1 kernel cmdline is required

(v2) fix for bc011f9 ("drm/amdgpu: Change SI/CI gfx/sdma/smu init sequence")
     remove CHIP_HAINAN support since it does not have physical DCE6 module

(v3) fix vblank irq support for DCE6 using ad hoc dce60_register_irq_handlers()
     replicating for vblank irq the behavior of dce110_register_irq_handlers()
     as per commit b57de80 ("drm/amd/display: Register on VLBLANK ISR.")

(v4) updated due to following kernel 5.2 commit:
     b2fddb13 ("drm/amd/display: Drop underlay plane support")

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dc/irq: add support for DCE6 (v4)

[Why]
irq service requires changes for DCE6 support

[How]
(v1) DCE6 targets are added replicating existing DCE8 implementation.
     due to missing CRTC_VERTICAL_INTERRUPT0_CONTROL registers/masks,
     dce/dce_8_0_{d,sh_mask}.h used instead of dce/dce_6_0_{d,sh_mask}.h

(v2) DCE6 headers used adding the necessary vblank irq registers
     (INT_MASK and VBLANK_STATUS) and vblank irq masks as implemented
     in amdgpu driver.
     Add vblank_irq_info_funcs_dce60 with .set and .ack as per commit
     b10d51f ("drm/amd/display: Add interrupt entries for VBLANK isr.")
     and use it in vblank_int_entry(reg_num) macro definition

(v3) updated due to following kernel 5.3 commit:
     4fc4dca ("drm/amd: drop use of drmp.h in os_types.h")

(v4) updated due to following kernel 5.6 commit:
     d9e3267 ("drm/amd/display: cleanup of construct and destruct funcs")

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dc/gpio: add support for DCE6 (v2)

[Why]
hw_factory.c requires changes for DCE6 support

[How]
DCE6 targets added replicating and adapting existing DCE8 implementation.

(v2) changes due to following commit:
    91db931 ("drm/amd/display: refactor gpio to allocate hw_container in constructor")

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dc/bios: add support for DCE6

[Why]
command_table_helper.c requires changes for DCE6 support

[How]
DCE6 targets added replicating and adapting the existing DCE8 implementation.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dc/core: add SI/DCE6 support (v2)

[Why]
resource_parse_asic_id() and dc_create_resource_pool() are missing SI/DCE6 cases

[How]
SI/DCE6 cases support added using existing DCE8 implementation as a reference

(v2) updated due to following kernel 5.2 commit:
     d9673c9 ("drm/amd/display: Pass init_data into DCN resource creation")

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dc/dce: add initial DCE6 support (v10)

[Why]
DCE6 chipsets have a lot in common with DCE8, let's start from this

[How]
DCE6 targets are added replicating existing DCE8 implementation.

NOTE: dce_8_0_{d,sh_mask}.h headers used instead of dce_6_0_{d,sh_mask}.h
initial build prototype due to missing DCE6 macros/registers/masks
DCE6 specific macros/registers/masks will be added with later commits

(v2b) removed dce_version cases in dc/dce/dce_clock_source.c and
     updated dce60 due to following kernel 5.0 commits:
     24f7dd7 ("drm/amd/display: move pplib/smu notification to dccg block")
     9566b67 ("drm/amd/display: remove safe_to_lower flag from dc, use 2 functions instead")
     4244381 ("drm/amd/display: clean up base dccg struct")
     4c5e8b5 ("drm/amd/display: split dccg clock manager into asic folders")
     84e7fc0 ("drm/amd/display: rename dccg to clk_mgr")
     77f6916 ("drm/amd/display: Remove duplicate header")
     9f7ddbe ("drm/amd/display: fix optimize_bandwidth func pointer for dce80")
     4ece61a ("drm/amd/display: set clocks to 0 on suspend on dce80")

(v3b) updated dce60 due to following kernel 5.1 commits:
     380604e ("drm/amd/display: Use 100 Hz precision for pipe pixel clocks")
     32e6136 ("drm/amd/display: Fix 64-bit division for 32-bit builds")
     1877ccf ("drm/amd/display: Change from aux_engine to dce_aux")
     c69dffa ("drm/amd/display: fix eDP fast bootup for pre-raven asic")

(v4b) updated dce60 due to following kernel 5.2 commits:
     e5c4197 ("drm/amd/display: Add plane capabilities to dc_caps")
     813d20d ("drm/amd/display: Fix multi-thread writing to 1 state")
     ea36ad3 ("drm/amd/display: expand plane caps to include fp16 and scaling capability")
     afcd526 ("drm/amd/display: Add fast_validate parameter")

(v5b) updated dce60 due to following kernel 5.3 commits:
     e7e10c4 ("drm/amd/display: stop external access to internal optc sync params")
     78cc70b ("drm/amd/display: Engine-specific encoder allocation")
     dc88b4a ("drm/amd/display: make clk mgr soc specific")
     4fc4dca ("drm/amd: drop use of drmp.h in os_types.h")

(v6b) updated dce60 due to following kernel 5.4 commits:
     54a9bcb ("drm/amd/display: Fix a typo - dce_aduio_mask --> dce_audio_mask")
     9adc805 ("drm/amd/display: make firmware info only load once during dc_bios create")

(v7b) updated dce60 due to following kernel 5.5 commits:
     cabe144 ("drm/amd/display: memory leak")
     8276dd8 ("drm/amd/display: update register field access mechanism")
     f6040a4 ("drm/amd/display: configurable aux timeout support")
     bf7f5ac ("drm/amd/display: map TRANSMITTER_UNIPHY_x to LINK_REGS_x")

(v8b) updated dce60 due to following kernel 5.6 commits:
     d9e3267 ("drm/amd/display: cleanup of construct and destruct funcs")
     f42ea55 ("drm/amd/display: add separate of private hwss functions")

(v9b) updated dce60 due to following kernel 5.8 commits:
     bba8289 ("drm/amd/display: code clean up in dce80_hw_sequencer.c")
     904fb6e ("drm/amd/display: move panel power seq to new panel struct")
     d4caa72 ("drm/amd/display: change from panel to panel cntl")

(v10) Fix up PLL handling for DCE6:
     DCE6.0 supports 2 PLLs.  DCE6.1 supports 3 PLLs. (Alex)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add asics info for SI parts

[Why]
Asic info for SI parts need to be preliminarly added

[How]
Asics info retrieved from si_id.h in https://github.com/GPUOpen-Tools/CodeXL

Tree path:
./CodeXL/Components/ShaderAnalyzer/AMDTBackEnd/Include/Common/asic_reg/si_id.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>

drm/amdgpu: add some required DCE6 registers (v7)

To help with the DC port.

v2: add missing masks, add additional registers
v3: more updates
v4: fix accidently dropped changes
v5: add missing nb pstate mask
v6: add vblank, vline masks
v7: add SCL_HORZ_FILTER_INIT regs

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: off by one bugs in smu_cmn_to_asic_specific_index()

These tables have _COUNT number of elements so the comparisons should be
>= instead of > to prevent reading one element beyond the end of the
array.

Fixes: 8264ee69f0d8 ("drm/amd/powerplay: drop unused code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: switch from 'pci_' to 'dma_' API

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'radeon_gart_table_ram_alloc()' GFP_KERNEL
can be used because its callers already use this flag.

Both 'r100_pci_gart_init()' (r100.c) and 'rs400_gart_init()' (rs400.c)
call 'radeon_gart_init()'.
This function uses 'vmalloc'.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: avoid a useless memset

Avoid a memset after a call to 'dma_alloc_coherent()'.
This is useless since
commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*")

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use proper abm/backlight functions for DCN3

Use DCN21 functions instead of DCE110

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use seperate dmcub firmware for navy_flounder

[Why]
Currently navy_flounder is using sienna_cichlid_dmcub.bin.

[How]
Create a seperate define so navy_flounder will use its own firmware.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check lane status again after link training done

[Why]
Some monitors could suffer symbol unlock but cannot send HPD IRQ to
notic source device to handle link loss. This makes monitor stuck in
abnormal status and causes black screen.

[How]
According to the suggestion from scalar vendor, to check lane status
again after link training done. That can improve the comaptibility
from current production monitors.

Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't compare dppclk before updating DTO

[Why]
In dcn3_update_clocks there are situations where dppclk is not
lowered (i.e. stays the same), but DTO still needs to be increased
before we program pipe frontend (i.e. in prepare_bandwidth). If we
don't program the new DTO value before we program the pipe,
we will underflow as soon as the pipe lock is released until the
next call to dcn3_update_clocks where the DTO is updated.

[How]
Remove dppclk check before programming new DTO value.

Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix naming of DSC Debugfs entry

[why]
Fix naming and return bits rather than bytes per pixel for
naming consistency. Because registers return Bytes per pixel,
but DSC Config structure is expecting bits per pixel as input.
So when returning the value convert from bytes into bits.

Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rename bytes_pp to the correct bits_pp

[Why]
Struct dcn_dsc_state is used for reading current state
and parameters of DSC on a pipe, the target rate parameter
uses bytes per pixel even though its reading BITS_PER_PIXEL
register.

[How]
Changing it to Bits Per Pixel for consistency.

Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up global sync param retrieval

[Why]
This change replaces older looping code in favor of these functions.

[How]
There are built in functions for extracting global sync params
during mode validation now.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/swsmu: allow asic to handle sensor type by itself

1. allow asic to handle sensor type by itself.
2. if not, use smu common sensor to handle it.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add support for umc 8.7 ras functions

added support for umc 8.7 error reporting and query

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update driver if file for sienna_cichlid

Update sienna_cichlid driver if header and related files.
Support new smu metrics for pre & postDS frequency.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add umc v8_7_0 IP headers

the change introduces IP headers for unified memory controller (umc)

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: revise the outputs layout of amdgpu_pm_info debugfs

The current outputs of amdgpu_pm_info debugfs come with clock gating
status and followed by current clock/power information. However the
clock gating status retrieving may pull GFX out of CG status. That
will make the succeeding clock/power information retrieving inaccurate.

To overcome this and be with minimum impact, the outputs are updated
to show current clock/power information first.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu/vcn3.0: remove extra asic type check"

This reverts commit 058c07201ec7d373fc6a0a570b38a8a9d62c29fb.
Chip NAVY_FLOUNDER uses vcn3.0, but it has only one VCN instance.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix spurious debug exception on gfx10

s_barrier triggers a debug exception when issued with PRIV=1,
DEBUG_EN=1. This causes spurious notifications to rocm-gdb.

Clear MODE before issuing s_barrier and restore MODE afterwards
in the context restore handler.

Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Tested-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: drop unnecessary message support check(v2)

Take back patch:drop unnecessary message support check
Because the gpu reset fail problem on renoir can be fixed by:
drm/amd/powerplay: skip invalid msg when smu set mp1 state
It needs to remove SWSMU_CODE_LAYER_L1 in smu_cmn.h to guard a clear
code layer.

Signed-off-by: changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add thermal throttling SMI event

Add support for reporting thermal throttling events through SMI.
Also, add a counter to count the number of throttling interrupts
observed and report the count in the SMI event message.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix system hang issue during GPU reset

when GPU hang, driver has multi-paths to enter amdgpu_device_gpu_recover,
the atomic adev->in_gpu_reset and hive->in_reset are used to avoid
re-entering GPU recovery.

During GPU reset and resume, it is unsafe that other threads access GPU,
which maybe cause GPU reset failed. Therefore the new rw_semaphore
adev->reset_sem is introduced, which protect GPU from being accessed by
external threads during recovery.

v2:
1. add rwlock for some ioctls, debugfs and file-close function.
2. change to use dqm->is_resetting and dqm_lock for protection in kfd
driver.
3. remove try_lock and change adev->in_gpu_reset as atomic, to avoid
re-enter GPU recovery for the same GPU hang.

v3:
1. change back to use adev->reset_sem to protect kfd callback
functions, because dqm_lock couldn't protect all codes, for example:
free_mqd must be called outside of dqm_lock;

[ 1230.176199] Hardware name: Supermicro SYS-7049GP-TRT/X11DPG-QT, BIOS 3.1 05/23/2019
[ 1230.177221] Call Trace:
[ 1230.178249]  dump_stack+0x98/0xd5
[ 1230.179443]  amdgpu_virt_kiq_reg_write_reg_wait+0x181/0x190 [amdgpu]
[ 1230.180673]  gmc_v9_0_flush_gpu_tlb+0xcc/0x310 [amdgpu]
[ 1230.181882]  amdgpu_gart_unbind+0xa9/0xe0 [amdgpu]
[ 1230.183098]  amdgpu_ttm_backend_unbind+0x46/0x180 [amdgpu]
[ 1230.184239]  ? ttm_bo_put+0x171/0x5f0 [ttm]
[ 1230.185394]  ttm_tt_unbind+0x21/0x40 [ttm]
[ 1230.186558]  ttm_tt_destroy.part.12+0x12/0x60 [ttm]
[ 1230.187707]  ttm_tt_destroy+0x13/0x20 [ttm]
[ 1230.188832]  ttm_bo_cleanup_memtype_use+0x36/0x80 [ttm]
[ 1230.189979]  ttm_bo_put+0x1be/0x5f0 [ttm]
[ 1230.191230]  amdgpu_bo_unref+0x1e/0x30 [amdgpu]
[ 1230.192522]  amdgpu_amdkfd_free_gtt_mem+0xaf/0x140 [amdgpu]
[ 1230.193833]  free_mqd+0x25/0x40 [amdgpu]
[ 1230.195143]  destroy_queue_cpsch+0x1a7/0x270 [amdgpu]
[ 1230.196475]  pqm_destroy_queue+0x105/0x260 [amdgpu]
[ 1230.197819]  kfd_ioctl_destroy_queue+0x37/0x70 [amdgpu]
[ 1230.199154]  kfd_ioctl+0x277/0x500 [amdgpu]
[ 1230.200458]  ? kfd_ioctl_get_clock_counters+0x60/0x60 [amdgpu]
[ 1230.201656]  ? tomoyo_file_ioctl+0x19/0x20
[ 1230.202831]  ksys_ioctl+0x98/0xb0
[ 1230.204004]  __x64_sys_ioctl+0x1a/0x20
[ 1230.205174]  do_syscall_64+0x5f/0x250
[ 1230.206339]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

2. remove try_lock and introduce atomic hive->in_reset, to avoid
re-enter GPU recovery.

v4:
1. remove an unnecessary whitespace change in kfd_chardev.c
2. remove comment codes in amdgpu_device.c
3. add more detailed comment in commit message
4. define a wrap function amdgpu_in_reset

v5:
1. Fix some style issues.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Suggested-by: Luben Tukov <luben.tuikov@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update dec ring test for VCN 3.0

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove redundant initialization of variable result

The variable result is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn3.0: remove extra asic type check

vcn ip block is already selected based on ASIC type during set_ip_blocks.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg3.0: remove extra asic type check

jpeg ip block is already selected based on ASIC type during set_ip_blocks.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Unify gfx9/gfx10 context save area layouts

Add some padding before the MODE register in the HWREGs block to
preserve the same layout as gfx9. This simplifies implementation of a
user-mode debugger.

Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Add RLC_CGTT_MGCG_OVERRIDE to gfx 10.3 headers

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove extra asic type check

vcn ip block is already selected based on ASIC type during set_ip_blocks

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: Remove extra asic type check

jpeg ip block is already selected based on ASIC type during set_ip_blocks.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add some documentation about memory clock

We expose the actual memory controller clock rate in Linux,
not the effective memory clock of the DRAMs.  To translate
it, it follows the following formula:

Clock conversion (Mhz):
HBM: effective_memory_clock = memory_controller_clock * 1
G5:  effective_memory_clock = memory_controller_clock * 1
G6:  effective_memory_clock = memory_controller_clock * 2

DRAM data rate (MT/s):
HBM: effective_memory_clock * 2 = data_rate
G5:  effective_memory_clock * 4 = data_rate
G6:  effective_memory_clock * 8 = data_rate

Bandwidth (MB/s):
data_rate * vram_bit_width / 8 = memory_bandwidth

Some examples:
G5 on RX460:
memory_controller_clock = 1750 Mhz
effective_memory_clock = 1750 Mhz * 1 = 1750 Mhz
data rate = 1750 * 4 = 7000 MT/s
memory_bandwidth = 7000 * 128 bits / 8 = 112000 MB/s

G6 on RX5600:
memory_controller_clock = 900 Mhz
effective_memory_clock = 900 Mhz * 2 = 1800 Mhz
data rate = 1800 * 8 = 14400 MT/s
memory_bandwidth = 14400 * 192 bits / 8 = 345600 MB/s

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant NULL check

Fix below warnings reported by coccicheck:
./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c:557:2-7: WARNING: NULL check before some freeing functions is not needed.

Fixes: 4d55b0dd1cdd ("drm/amd/display: Add DCN3 CLK_MGR")
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move umc specific macros to header

certain umc macros are common across umc versions

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update golden setting for sienna_cichlid

Update golden setting for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: correct smu message for vf mode

Set valid_in_vf to false for the message not support in vf mode on
sienna cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add msg map for mode1 reset

Mapping Mode1Reset message for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: skip invalid msg when smu set mp1 state

Some asic may not support for some message of set mp1 state.
If the return value of smu_send_smc_msg is -EINVAL, that means it failed
to send msg to smc as it can not map an valid message for the ASIC. And
with that case, smu_set_mp1_state should be skipped as those ASIC was in
fact do not support for that.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dc: Simplify drm_crtc_state::active checks

drm_atomic_crtc_check enforces that ::active can only be true if
::enable is as well.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: remove the dpm checking in the boot sequence

It's not necessary to retrieve the power features status when the
asic is booted up the first time. This patch can have the features
enablement status still checked in suspend/resume case and removed
from the first boot up sequence.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Fix compiler warning in df driver

Fix this warning:

  CC [M]  drivers/gpu/drm/amd/amdgpu/gfxhub_v1_1.o
In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h:29,
                 from drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h:26,
                 from drivers/gpu/drm/amd/amdgpu/amdgpu.h:43,
                 from drivers/gpu/drm/amd/amdgpu/df_v3_6.c:23:
drivers/gpu/drm/amd/amdgpu/df_v3_6.c: In function ‘df_v3_6_pmc_get_count’:
./include/drm/drm_print.h:487:2: warning: ‘hi_base_addr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  487 |  __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
      |  ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:649:25: note: ‘hi_base_addr’ was declared here
  649 |  uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0;
      |                         ^~~~~~~~~~~~
In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h:29,
                 from drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h:26,
                 from drivers/gpu/drm/amd/amdgpu/amdgpu.h:43,
                 from drivers/gpu/drm/amd/amdgpu/df_v3_6.c:23:
./include/drm/drm_print.h:487:2: warning: ‘lo_base_addr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  487 |  __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
      |  ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:649:11: note: ‘lo_base_addr’ was declared here
  649 |  uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0;

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: won't include gc and mmhub register headers in GMC block

All gc/mmhub register access and operation should be in gfxhub/mmhub level.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move get_invalidate_req function into gfxhub/mmhub level

This patch is to move get_invalidate_req into gfxhub/mmhub level. It will avoid
mismatch of the different gfxhub/mmhub register offsets and fields in the same
gmc block.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add vmhub funcs helper (v2)

This patch is to introduce vmhub funcs helper to add following callback
(print_l2_protection_fault_status). Each GC/MMHUB register specific programming
should be in gfxhub/mmhub level.

v2: remove the condition of funcs assignment.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: abstract set_vm_fault_masks function to refine the programming

This patch is to add set_vm_fault_masks helper to amdgpu_gmc to refine the
original programming.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add member to store vm fault interrupt masks

This patch adds a member in vmhub structure to store the vm fault interrupt
masks for different version gfxhubs/mmhubs.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/powerplay: drop unnecessary message support check"

The below 3 messages are not supported on Renoir
SMU_MSG_PrepareMp1ForShutdown
SMU_MSG_PrepareMp1ForUnload
SMU_MSG_PrepareMp1ForReset

It needs to revert patch:
drm/amd/powerplay: drop unnecessary message support check
to avoid set mp1 state fail during gpu reset on renoir.

Signed-off-by: changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>