review.tizen.org Git - platform/kernel/linux-rpi.git/log

spi: atmel-quadspi: Fix use-after-free on unbind

commit c7b884561cb5b641f3dbba950094110794119a6d upstream.

atmel_qspi_remove() accesses the driver's private data after calling
spi_unregister_controller() even though that function releases the last
reference on the spi_controller and thereby frees the private data.

Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.

Fixes: 2d30ac5ed633 ("mtd: spi-nor: atmel-quadspi: Use spi-mem interface for atmel-quadspi driver")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v5.0+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <stable@vger.kernel.org> # v5.0+
Cc: Piotr Bugalski <bugalski.piotr@gmail.com>
Link: https://lore.kernel.org/r/4b05c65cf6f1ea3251484fe9a00b4c65478a1ae3.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: spi-sh: Fix use-after-free on unbind

commit e77df3eca12be4b17f13cf9f215cff248c57d98f upstream.

spi_sh_remove() accesses the driver's private data after calling
spi_unregister_master() even though that function releases the last
reference on the spi_master and thereby frees the private data.

Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.

Fixes: 680c1305e259 ("spi/spi_sh: use spi_unregister_master instead of spi_master_put in remove path")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v3.0+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <stable@vger.kernel.org> # v3.0+
Cc: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/6d97628b536baf01d5e3e39db61108f84d44c8b2.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: pxa2xx: Fix use-after-free on unbind

commit 5626308bb94d9f930aa5f7c77327df4c6daa7759 upstream.

pxa2xx_spi_remove() accesses the driver's private data after calling
spi_unregister_controller() even though that function releases the last
reference on the spi_controller and thereby frees the private data.

Fix by switching over to the new devm_spi_alloc_master/slave() helper
which keeps the private data accessible until the driver has unbound.

Fixes: 32e5b57232c0 ("spi: pxa2xx: Fix controller unregister order")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v2.6.17+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <stable@vger.kernel.org> # v2.6.17+: 32e5b57232c0: spi: pxa2xx: Fix controller unregister order
Cc: <stable@vger.kernel.org> # v2.6.17+
Link: https://lore.kernel.org/r/5764b04d4a6e43069ebb7808f64c2f774ac6f193.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack

commit 0fb6ee8d0b5e90b72f870f76debc8bd31a742014 upstream.

Use a heap allocated memory for the SPI transfer buffer. Using stack memory
can corrupt stack memory when using DMA on some systems.

This change moves the buffer from the stack of the trigger handler call to
the heap of the buffer of the state struct. The size increases takes into
account the alignment for the timestamp, which is 8 bytes.

The 'data' buffer is split into 'tx_buf' and 'rx_buf', to make a clearer
separation of which part of the buffer should be used for TX & RX.

Fixes: af3008485ea03 ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201124123807.19717-1-alexandru.ardelean@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix mismatch between misplaced vma check and vma insert

commit 0e53656ad8abc99e0a80c3de611e593ebbf55829 upstream.

When inserting a VMA, we restrict the placement to the low 4G unless the
caller opts into using the full range. This was done to allow usersapce
the opportunity to transition slowly from a 32b address space, and to
avoid breaking inherent 32b assumptions of some commands.

However, for insert we limited ourselves to 4G-4K, but on verification
we allowed the full 4G. This causes some attempts to bind a new buffer
to sporadically fail with -ENOSPC, but at other times be bound
successfully.

commit 48ea1e32c39d ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1
page") suggests that there is a genuine problem with stateless addressing
that cannot utilize the last page in 4G and so we purposefully excluded
it. This means that the quick pin pass may cause us to utilize a buggy
placement.

Reported-by: CQ Tang <cq.tang@intel.com>
Testcase: igt/gem_exec_params/larger-than-life-batch
Fixes: 48ea1e32c39d ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: CQ Tang <cq.tang@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v4.5+
Link: https://patchwork.freedesktop.org/patch/msgid/20201216092951.7124-1-chris@chris-wilson.co.uk
(cherry picked from commit 5f22cc0b134ab702d7f64b714e26018f7288ffee)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp_aux_dev: check aux_dev before use in drm_dp_aux_dev_get_by_minor()

commit 73b62cdb93b68d7e2c1d373c6a411bc00c53e702 upstream.

I observed this when unplugging a DP monitor whilst a computer is asleep
and then waking it up. This left DP chardev nodes still being present on
the filesystem and accessing these device nodes caused an oops because
drm_dp_aux_dev_get_by_minor() assumes a device exists if it is opened.
This can also be reproduced by creating a device node with mknod(1) and
issuing an open(2)

[166164.933198] BUG: kernel NULL pointer dereference, address: 0000000000000018
[166164.933202] #PF: supervisor read access in kernel mode
[166164.933204] #PF: error_code(0x0000) - not-present page
[166164.933205] PGD 0 P4D 0
[166164.933208] Oops: 0000 [#1] PREEMPT SMP NOPTI
[166164.933211] CPU: 4 PID: 99071 Comm: fwupd Tainted: G        W
5.8.0-rc6+ #1
[166164.933213] Hardware name: LENOVO 20RD002VUS/20RD002VUS, BIOS R16ET25W
(1.11 ) 04/21/2020
[166164.933232] RIP: 0010:drm_dp_aux_dev_get_by_minor+0x29/0x70
[drm_kms_helper]
[166164.933234] Code: 00 0f 1f 44 00 00 55 48 89 e5 41 54 41 89 fc 48 c7
c7 60 01 a4 c0 e8 26 ab 30 d7 44 89 e6 48 c7 c7 80 01 a4 c0 e8 47 94 d6 d6
<8b> 50 18 49 89 c4 48 8d 78 18 85 d2 74 33 8d 4a 01 89 d0 f0 0f b1
[166164.933236] RSP: 0018:ffffb7d7c41cbbf0 EFLAGS: 00010246
[166164.933237] RAX: 0000000000000000 RBX: ffff8a90001fe900 RCX: 0000000000000000
[166164.933238] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffffffc0a40180
[166164.933239] RBP: ffffb7d7c41cbbf8 R08: 0000000000000000 R09: ffff8a93e157d6d0
[166164.933240] R10: 0000000000000000 R11: ffffffffc0a40188 R12: 0000000000000003
[166164.933241] R13: ffff8a9402200e80 R14: ffff8a90001fe900 R15: 0000000000000000
[166164.933244] FS:  00007f7fb041eb00(0000) GS:ffff8a9411500000(0000)
knlGS:0000000000000000
[166164.933245] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[166164.933246] CR2: 0000000000000018 CR3: 00000000352c2003 CR4: 00000000003606e0
[166164.933247] Call Trace:
[166164.933264]  auxdev_open+0x1b/0x40 [drm_kms_helper]
[166164.933278]  chrdev_open+0xa7/0x1c0
[166164.933282]  ? cdev_put.part.0+0x20/0x20
[166164.933287]  do_dentry_open+0x161/0x3c0
[166164.933291]  vfs_open+0x2d/0x30
[166164.933297]  path_openat+0xb27/0x10e0
[166164.933306]  ? atime_needs_update+0x73/0xd0
[166164.933309]  do_filp_open+0x91/0x100
[166164.933313]  ? __alloc_fd+0xb2/0x150
[166164.933316]  do_sys_openat2+0x210/0x2d0
[166164.933318]  do_sys_open+0x46/0x80
[166164.933320]  __x64_sys_openat+0x20/0x30
[166164.933328]  do_syscall_64+0x52/0xc0
[166164.933336]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

(gdb) disassemble drm_dp_aux_dev_get_by_minor+0x29
Dump of assembler code for function drm_dp_aux_dev_get_by_minor:
   0x0000000000017b10 <+0>:     callq  0x17b15 <drm_dp_aux_dev_get_by_minor+5>
   0x0000000000017b15 <+5>:     push   %rbp
   0x0000000000017b16 <+6>:     mov    %rsp,%rbp
   0x0000000000017b19 <+9>:     push   %r12
   0x0000000000017b1b <+11>:    mov    %edi,%r12d
   0x0000000000017b1e <+14>:    mov    $0x0,%rdi
   0x0000000000017b25 <+21>:    callq  0x17b2a <drm_dp_aux_dev_get_by_minor+26>
   0x0000000000017b2a <+26>:    mov    %r12d,%esi
   0x0000000000017b2d <+29>:    mov    $0x0,%rdi
   0x0000000000017b34 <+36>:    callq  0x17b39 <drm_dp_aux_dev_get_by_minor+41>
   0x0000000000017b39 <+41>:    mov    0x18(%rax),%edx <=========
   0x0000000000017b3c <+44>:    mov    %rax,%r12
   0x0000000000017b3f <+47>:    lea    0x18(%rax),%rdi
   0x0000000000017b43 <+51>:    test   %edx,%edx
   0x0000000000017b45 <+53>:    je     0x17b7a <drm_dp_aux_dev_get_by_minor+106>
   0x0000000000017b47 <+55>:    lea    0x1(%rdx),%ecx
   0x0000000000017b4a <+58>:    mov    %edx,%eax
   0x0000000000017b4c <+60>:    lock cmpxchg %ecx,(%rdi)
   0x0000000000017b50 <+64>:    jne    0x17b76 <drm_dp_aux_dev_get_by_minor+102>
   0x0000000000017b52 <+66>:    test   %edx,%edx
   0x0000000000017b54 <+68>:    js     0x17b6d <drm_dp_aux_dev_get_by_minor+93>
   0x0000000000017b56 <+70>:    test   %ecx,%ecx
   0x0000000000017b58 <+72>:    js     0x17b6d <drm_dp_aux_dev_get_by_minor+93>
   0x0000000000017b5a <+74>:    mov    $0x0,%rdi
   0x0000000000017b61 <+81>:    callq  0x17b66 <drm_dp_aux_dev_get_by_minor+86>
   0x0000000000017b66 <+86>:    mov    %r12,%rax
   0x0000000000017b69 <+89>:    pop    %r12
   0x0000000000017b6b <+91>:    pop    %rbp
   0x0000000000017b6c <+92>:    retq
   0x0000000000017b6d <+93>:    xor    %esi,%esi
   0x0000000000017b6f <+95>:    callq  0x17b74 <drm_dp_aux_dev_get_by_minor+100>
   0x0000000000017b74 <+100>:   jmp    0x17b5a <drm_dp_aux_dev_get_by_minor+74>
   0x0000000000017b76 <+102>:   mov    %eax,%edx
   0x0000000000017b78 <+104>:   jmp    0x17b43 <drm_dp_aux_dev_get_by_minor+51>
   0x0000000000017b7a <+106>:   xor    %r12d,%r12d
   0x0000000000017b7d <+109>:   jmp    0x17b5a <drm_dp_aux_dev_get_by_minor+74>
End of assembler dump.

(gdb) list *drm_dp_aux_dev_get_by_minor+0x29
0x17b39 is in drm_dp_aux_dev_get_by_minor (drivers/gpu/drm/drm_dp_aux_dev.c:65).
60      static struct drm_dp_aux_dev *drm_dp_aux_dev_get_by_minor(unsigned index)
61      {
62              struct drm_dp_aux_dev *aux_dev = NULL;
63
64              mutex_lock(&aux_idr_mutex);
65              aux_dev = idr_find(&aux_idr, index);
66              if (!kref_get_unless_zero(&aux_dev->refcount))
67                      aux_dev = NULL;
68              mutex_unlock(&aux_idr_mutex);
69
(gdb) p/x &((struct drm_dp_aux_dev *)(0x0))->refcount
$8 = 0x18

Looking at the caller, checks on the minor are pushed down to
drm_dp_aux_dev_get_by_minor()

static int auxdev_open(struct inode *inode, struct file *file)
{
    unsigned int minor = iminor(inode);
    struct drm_dp_aux_dev *aux_dev;

    aux_dev = drm_dp_aux_dev_get_by_minor(minor); <====
    if (!aux_dev)
        return -ENODEV;

    file->private_data = aux_dev;
    return 0;
}

Fixes: e94cb37b34eb ("drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers.")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Zwane Mwaikambo <zwane@yosper.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added Cc to stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.21.2010122231070.38717@montezuma.home
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Fix memory leaks in S3 resume

commit a135a1b4c4db1f3b8cbed9676a40ede39feb3362 upstream.

EDID parsing in S3 resume pushes new display modes
to probed_modes list but doesn't consolidate to actual
mode list. This creates a race condition when
amdgpu_dm_connector_ddc_get_modes() re-initializes the
list head without walking the list and results in memory leak.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=209987
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: only set DP subconnector type on DP and eDP connectors

commit 05211e7fbbf042dd7f51155ebe64eb2ecacb25cb upstream.

Fixes a crash in drm_object_property_set_value() because the property
is not set for internal DP ports that connect to a bridge chips
(e.g., DP to VGA or DP to LVDS).

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210739
Fixes: 65bf2cf95d3ade ("drm/amdgpu: utilize subconnector property for DP through atombios")
Tested-By: Kris Karas <bugs-a17@moonlit-rail.com>
Cc: Oleg Vasilev <oleg.vasilev@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: mlx-platform: remove an unused variable

commit eca6ba20f38cfa2f148d7bd13db7ccd19e88635b upstream.

The only reference to the mlxplat_mlxcpld_psu[] array got removed,
so there is now a warning from clang:

drivers/platform/x86/mlx-platform.c:322:30: error: variable 'mlxplat_mlxcpld_psu' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static struct i2c_board_info mlxplat_mlxcpld_psu[] = {

Remove the array as well and adapt the ARRAY_SIZE() call
accordingly.

Fixes: 912b341585e3 ("platform/x86: mlx-platform: Remove PSU EEPROM from MSN274x platform configuration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20201203223105.1195709-1-arnd@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Move the GPU reset bits outside the timeout handler

commit 5bc5cc2819c2c0adb644919e3e790b504ea47e0a upstream.

We've fixed many races in panfrost_job_timedout() but some remain.
Instead of trying to fix it again, let's simplify the logic and move
the reset bits to a separate work scheduled when one of the queue
reports a timeout.

v5:
- Simplify panfrost_scheduler_stop() (Steven Price)
- Always restart the queue in panfrost_scheduler_start() even if
  the status is corrupted (Steven Price)

v4:
- Rework the logic to prevent a race between drm_sched_start()
  (reset work) and drm_sched_job_timedout() (timeout work)
- Drop Steven's R-b
- Add dma_fence annotation to the panfrost_reset() function (Daniel Vetter)

v3:
- Replace the atomic_cmpxchg() by an atomic_xchg() (Robin Murphy)
- Add Steven's R-b

v2:
- Use atomic_cmpxchg() to conditionally schedule the reset work
  (Steven Price)

Fixes: 1a11a88cfd9a ("drm/panfrost: Fix job timeout handling")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105151704.2010667-1-boris.brezillon@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panfrost: Fix job timeout handling

commit 1a11a88cfd9a97e13be8bc880c4795f9844fbbec upstream.

If more than two jobs end up timeout-ing concurrently, only one of them
(the one attached to the scheduler acquiring the lock) is fully handled.
The other one remains in a dangling state where it's no longer part of
the scheduling queue, but still blocks something in scheduler, leading
to repetitive timeouts when new jobs are queued.

Let's make sure all bad jobs are properly handled by the thread
acquiring the lock.

v3:
- Add Steven's R-b
- Don't take the sched_lock when stopping the schedulers

v2:
- Fix the subject prefix
- Stop the scheduler before returning from panfrost_job_timedout()
- Call cancel_delayed_work_sync() after drm_sched_stop() to make sure
no timeout handlers are in flight when we reset the GPU (Steven Price)
- Make sure we release the reset lock before restarting the
schedulers (Steven Price)

Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002122506.1374183-1-boris.brezillon@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jfs: Fix array index bounds check in dbAdjTree

commit c61b3e4839007668360ed8b87d7da96d2e59fc6c upstream.

Bounds checking tools can flag a bug in dbAdjTree() for an array index
out of bounds in dmt_stree. Since dmt_stree can refer to the stree in
both structures dmaptree and dmapctl, use the larger array to eliminate
the false positive.

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsnotify: fix events reported to watching parent and child

commit fecc4559780d52d174ea05e3bf543669165389c3 upstream.

fsnotify_parent() used to send two separate events to backends when a
parent inode is watching children and the child inode is also watching.
In an attempt to avoid duplicate events in fanotify, we unified the two
backend callbacks to a single callback and handled the reporting of the
two separate events for the relevant backends (inotify and dnotify).
However the handling is buggy and can result in inotify and dnotify
listeners receiving events of the type they never asked for or spurious
events.

The problem is the unified event callback with two inode marks (parent and
child) is called when any of the parent and child inodes are watched and
interested in the event, but the parent inode's mark that is interested
in the event on the child is not necessarily the one we are currently
reporting to (it could belong to a different group).

So before reporting the parent or child event flavor to backend we need
to check that the mark is really interested in that event flavor.

The semantics of INODE and CHILD marks were hard to follow and made the
logic more complicated than it should have been. Replace it with INODE
and PARENT marks semantics to hopefully make the logic more clear.

Thanks to Hugh Dickins for spotting a bug in the earlier version of this
patch.

Fixes: 497b0c5a7c06 ("fsnotify: send event to parent and child with single callback")
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201202120713.702387-4-amir73il@gmail.com
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inotify: convert to handle_inode_event() interface

commit 1a2620a99803ad660edc5d22fd9c66cce91ceb1c upstream.

Convert inotify to use the simple handle_inode_event() interface to
get rid of the code duplication between the generic helper
fsnotify_handle_event() and the inotify_handle_event() callback, which
also happen to be buggy code.

The bug will be fixed in the generic helper.

Link: https://lore.kernel.org/r/20201202120713.702387-3-amir73il@gmail.com
CC: stable@vger.kernel.org
Fixes: b9a1b9772509 ("fsnotify: create method handle_inode_event() in fsnotify_operations")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsnotify: generalize handle_inode_event()

commit 950cc0d2bef078e1f6459900ca4d4b2a2e0e3c37 upstream.

The handle_inode_event() interface was added as (quoting comment):
"a simple variant of handle_event() for groups that only have inode
marks and don't have ignore mask".

In other words, all backends except fanotify. The inotify backend
also falls under this category, but because it required extra arguments
it was left out of the initial pass of backends conversion to the
simple interface.

This results in code duplication between the generic helper
fsnotify_handle_event() and the inotify_handle_event() callback
which also happen to be buggy code.

Generalize the handle_inode_event() arguments and add the check for
FS_EXCL_UNLINK flag to the generic helper, so inotify backend could
be converted to use the simple interface.

Link: https://lore.kernel.org/r/20201202120713.702387-2-amir73il@gmail.com
CC: stable@vger.kernel.org
Fixes: b9a1b9772509 ("fsnotify: create method handle_inode_event() in fsnotify_operations")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jffs2: Fix ignoring mounting options problem during remounting

commit 08cd274f9b8283a1da93e2ccab216a336da83525 upstream.

The jffs2 mount options will be ignored when remounting jffs2.
It can be easily reproduced with the steps listed below.
1. mount -t jffs2 -o compr=none /dev/mtdblockx /mnt
2. mount -o remount compr=zlib /mnt

Since ec10a24f10c8, the option parsing happens before fill_super and
then pass fc, which contains the options parsing results, to function
jffs2_reconfigure during remounting. But function jffs2_reconfigure do
not update c->mount_opts.

This patch add a function jffs2_update_mount_opts to fix this problem.

By the way, I notice that tmpfs use the same way to update remounting
options. If it is necessary to unify them?

Cc: <stable@vger.kernel.org>
Fixes: ec10a24f10c8 ("vfs: Convert jffs2 to use the new mount API")
Signed-off-by: lizhe <lizhe67@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jffs2: Fix GC exit abnormally

commit 9afc9a8a4909fece0e911e72b1060614ba2f7969 upstream.

The log of this problem is:
jffs2: Error garbage collecting node at 0x***!
jffs2: No space for garbage collection. Aborting GC thread

This is because GC believe that it do nothing, so it abort.

After going over the image of jffs2, I find a scene that
can trigger this problem stably.
The scene is: there is a normal dirent node at summary-area,
but abnormal at corresponding not-summary-area with error
name_crc.

The reason that GC exit abnormally is because it find that
abnormal dirent node to GC, but when it goes to function
jffs2_add_fd_to_list, it cannot meet the condition listed
below:

if ((*prev)->nhash == new->nhash && !strcmp((*prev)->name, new->name))

So no node is marked obsolete, statistical information of
erase_block do not change, which cause GC exit abnormally.

The root cause of this problem is: we do not check the
name_crc of the abnormal dirent node with summary is enabled.

Noticed that in function jffs2_scan_dirent_node, we use
function jffs2_scan_dirty_space to deal with the dirent
node with error name_crc. So this patch add a checking
code in function read_direntry to ensure the correctness
of dirent node. If checked failed, the dirent node will
be marked obsolete so GC will pass this node and this
problem will be fixed.

Cc: <stable@vger.kernel.org>
Signed-off-by: Zhe Li <lizhe67@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubifs: wbuf: Don't leak kernel memory to flash

commit 20f1431160c6b590cdc269a846fc5a448abf5b98 upstream.

Write buffers use a kmalloc()'ed buffer, they can leak
up to seven bytes of kernel memory to flash if writes are not
aligned.
So use ubifs_pad() to fill these gaps with padding bytes.
This was never a problem while scanning because the scanner logic
manually aligns node lengths and skips over these gaps.

Cc: <stable@vger.kernel.org>
Fixes: 1e51764a3c2ac05a2 ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SMB3.1.1: do not log warning message if server doesn't populate salt

commit 7955f105afb6034af344038d663bc98809483cdd upstream.

In the negotiate protocol preauth context, the server is not required
to populate the salt (although it is done by most servers) so do
not warn on mount.

We retain the checks (warn) that the preauth context is the minimum
size and that the salt does not exceed DataLength of the SMB response.
Although we use the defaults in the case that the preauth context
response is invalid, these checks may be useful in the future
as servers add support for additional mechanisms.

CC: Stable <stable@vger.kernel.org>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SMB3.1.1: remove confusing mount warning when no SPNEGO info on negprot rsp

commit bc7c4129d4cdc56d1b5477c1714246f27df914dd upstream.

Azure does not send an SPNEGO blob in the negotiate protocol response,
so we shouldn't assume that it is there when validating the location
of the first negotiate context. This avoids the potential confusing
mount warning:

CIFS: Invalid negotiate context offset

CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SMB3: avoid confusing warning message on mount to Azure

commit ebcd6de98754d9b6a5f89d7835864b1c365d432f upstream.

Mounts to Azure cause an unneeded warning message in dmesg
"CIFS: VFS: parse_server_interfaces: incomplete interface info"

Azure rounds up the size (by 8 additional bytes, to a
16 byte boundary) of the structure returned on the query
of the server interfaces at mount time. This is permissible
even though different than other servers so do not log a warning
if query network interfaces response is only rounded up by 8
bytes or fewer.

CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: fix race in concurrent __ceph_remove_cap invocations

commit e5cafce3ad0f8652d6849314d951459c2bff7233 upstream.

A NULL pointer dereference may occur in __ceph_remove_cap with some of the
callbacks used in ceph_iterate_session_caps, namely trim_caps_cb and
remove_session_caps_cb. Those callers hold the session->s_mutex, so they
are prevented from concurrent execution, but ceph_evict_inode does not.

Since the callers of this function hold the i_ceph_lock, the fix is simply
a matter of returning immediately if caps->ci is NULL.

Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/43272
Suggested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: Fix time-travel mode

commit ff9632d2a66512436d616ef4c380a0e73f748db1 upstream.

Since the time-travel rework, basic time-travel mode hasn't worked
properly, but there's no longer a need for this WARN_ON() so just
remove it and thereby fix things.

Cc: stable@vger.kernel.org
Fixes: 4b786e24ca80 ("um: time-travel: Rewrite as an event scheduler")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: Remove use of asprinf in umid.c

commit 97be7ceaf7fea68104824b6aa874cff235333ac1 upstream.

asprintf is not compatible with the existing uml memory allocation
mechanism. Its use on the "user" side of UML results in a corrupt slab
state.

Fixes: 0d4e5ac7e780 ("um: remove uses of variable length arrays")
Cc: stable@vger.kernel.org
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Don't modify file descriptor mode on the fly

commit 207cdd565dfc95a0a5185263a567817b7ebf5467 upstream.

Commit a408e4a86b36b ("ima: open a new file instance if no read
permissions") already introduced a second open to measure a file when the
original file descriptor does not allow it. However, it didn't remove the
existing method of changing the mode of the original file descriptor, which
is still necessary if the current process does not have enough privileges
to open a new one.

Changing the mode isn't really an option, as the filesystem might need to
do preliminary steps to make the read possible. Thus, this patch removes
the code and keeps the second open as the only option to measure a file
when it is unreadable with the original file descriptor.

Cc: <stable@vger.kernel.org> # 4.20.x: 0014cc04e8ec0 ima: Set file->f_mode
Fixes: 2fe5d6def1672 ("ima: integrity appraisal extension")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: make ioctl() safe

commit 89bdfaf93d9157499c3a0d61f489df66f2dead7f upstream.

ovl_ioctl_set_flags() does a capability check using flags, but then the
real ioctl double-fetches flags and uses potentially different value.

The "Check the capability before cred override" comment misleading: user
can skip this check by presenting benign flags first and then overwriting
them to non-benign flags.

Just remove the cred override for now, hoping this doesn't cause a
regression.

The proper solution is to create a new setxflags i_op (patches are in the
works).

Xfstests don't show a regression.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Fixes: dab5ca8fd9dd ("ovl: add lsattr/chattr support")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv/memtrace: Fix crashing the kernel when enabling concurrently

commit d6718941a2767fb383e105d257d2105fe4f15f0e upstream.

It's very easy to crash the kernel right now by simply trying to
enable memtrace concurrently, hammering on the "enable" interface

loop.sh:
  #!/bin/bash

  dmesg --console-off

  while true; do
          echo 0x40000000 > /sys/kernel/debug/powerpc/memtrace/enable
  done

[root@localhost ~]# loop.sh &
[root@localhost ~]# loop.sh &

Resulting quickly in a kernel crash. Let's properly protect using a
mutex.

Fixes: 9d5171a8f248 ("powerpc/powernv: Enable removal of memory for in memory tracing")
Cc: stable@vger.kernel.org# v4.14+
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-3-david@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv/memtrace: Don't leak kernel memory to user space

commit c74cf7a3d59a21b290fe0468f5b470d0b8ee37df upstream.

We currently leak kernel memory to user space, because memory
offlining doesn't do any implicit clearing of memory and we are
missing explicit clearing of memory.

Let's keep it simple and clear pages before removing the linear
mapping.

Reproduced in QEMU/TCG with 10 GiB of main memory:
  [root@localhost ~]# dd obs=9G if=/dev/urandom of=/dev/null
  [... wait until "free -m" used counter no longer changes and cancel]
  19665802+0 records in
  1+0 records out
  9663676416 bytes (9.7 GB, 9.0 GiB) copied, 135.548 s, 71.3 MB/s
  [root@localhost ~]# cat /sys/devices/system/memory/block_size_bytes
  40000000
  [root@localhost ~]# echo 0x40000000 > /sys/kernel/debug/powerpc/memtrace/enable
  [  402.978663][ T1086] page:000000001bc4bc74 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x24900
  [  402.980063][ T1086] flags: 0x7ffff000001000(reserved)
  [  402.980415][ T1086] raw: 007ffff000001000 c00c000000924008 c00c000000924008 0000000000000000
  [  402.980627][ T1086] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
  [  402.980845][ T1086] page dumped because: unmovable page
  [  402.989608][ T1086] Offlined Pages 16384
  [  403.324155][ T1086] memtrace: Allocated trace memory on node 0 at 0x0000000200000000

Before this patch:
  [root@localhost ~]# hexdump -C /sys/kernel/debug/powerpc/memtrace/00000000/trace  | head
  00000000  c8 25 72 51 4d 26 36 c5  5c c2 56 15 d5 1a cd 10  |.%rQM&6.\.V.....|
  00000010  19 b9 50 b2 cb e3 60 b8  ec 0a f3 ec 4b 3c 39 f0  |..P...`.....K<9.|$
  00000020  4e 5a 4c cf bd 26 19 ff  37 79 13 67 24 b7 b8 57  |NZL..&..7y.g$..W|$
  00000030  98 3e f5 be 6f 14 6a bd  a4 52 bc 6e e9 e0 c1 5d  |.>..o.j..R.n...]|$
  00000040  76 b3 ae b5 88 d7 da e3  64 23 85 2c 10 88 07 b6  |v.......d#.,....|$
  00000050  9a d8 91 de f7 50 27 69  2e 64 9c 6f d3 19 45 79  |.....P'i.d.o..Ey|$
  00000060  6a 6f 8a 61 71 19 1f c7  f1 df 28 26 ca 0f 84 55  |jo.aq.....(&...U|$
  00000070  01 3f be e4 e2 e1 da ff  7b 8c 8e 32 37 b4 24 53  |.?......{..27.$S|$
  00000080  1b 70 30 45 56 e6 8c c4  0e b5 4c fb 9f dd 88 06  |.p0EV.....L.....|$
  00000090  ef c4 18 79 f1 60 b1 5c  79 59 4d f4 36 d7 4a 5c  |...y.`.\yYM.6.J\|$

After this patch:
  [root@localhost ~]# hexdump -C /sys/kernel/debug/powerpc/memtrace/00000000/trace  | head
  00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
  *
  40000000

Fixes: 9d5171a8f248 ("powerpc/powernv: Enable removal of memory for in memory tracing")
Cc: stable@vger.kernel.org # v4.14+
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201111145322.15793-2-david@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv/npu: Do not attempt NPU2 setup on POWER8NVL NPU

commit b1198a88230f2ce50c271e22b82a8b8610b2eea9 upstream.

We execute certain NPU2 setup code (such as mapping an LPID to a device
in NPU2) unconditionally if an Nvlink bridge is detected. However this
cannot succeed on POWER8NVL machines and errors appear in dmesg. This is
harmless as skiboot returns an error and the only place we check it is
vfio-pci but that code does not get called on P8+ either.

This adds a check if pnv_npu2_xxx helpers are called on a machine with
NPU2 which initializes pnv_phb::npu in pnv_npu2_init();
pnv_phb::npu==NULL on POWER8/NVL (Naples).

While at this, fix NULL derefencing in pnv_npu_peers_take_ownership/
pnv_npu_peers_release_ownership which occurs when GPUs on mentioned P8s
cause EEH which happens if "vfio-pci" disables devices using
the D3 power state; the vfio-pci's disable_idle_d3 module parameter
controls this and must be set on Naples. The EEH handling clears
the entire pnv_ioda_pe struct in pnv_ioda_free_pe() hence
the NULL derefencing. We cannot recover from that but at least we stop
crashing.

Tested on
- POWER9 pvr=004e1201, Ubuntu 19.04 host, Ubuntu 18.04 vm,
NVIDIA GV100 10de:1db1 driver 418.39
- POWER8 pvr=004c0100, RHEL 7.6 host, Ubuntu 16.10 vm,
NVIDIA P100 10de:15f9 driver 396.47

Fixes: 1b785611e119 ("powerpc/powernv/npu: Add release_ownership hook")
Cc: stable@vger.kernel.org # 5.0
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201122073828.15446-1-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Fix verification of MMU_FTR_TYPE_44x

commit 17179aeb9d34cc81e1a4ae3f85e5b12b13a1f8d0 upstream.

MMU_FTR_TYPE_44x cannot be checked by cpu_has_feature()

Use mmu_has_feature() instead

Fixes: 23eb7f560a2a ("powerpc: Convert flush_icache_range & friends to C")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ceede82fadf37f3b8275e61fcf8cf29a3e2ec7fe.1602351011.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/8xx: Fix early debug when SMC1 is relocated

commit 1e78f723d6a52966bfe3804209dbf404fdc9d3bb upstream.

When SMC1 is relocated and early debug is selected, the
board hangs is ppc_md.setup_arch(). This is because ones
the microcode has been loaded and SMC1 relocated, early
debug writes in the weed.

To allow smooth continuation, the SMC1 parameter RAM set up
by the bootloader have to be copied into the new location.

Fixes: 43db76f41824 ("powerpc/8xx: Add microcode patch to move SMC parameter RAM.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b2f71f39eca543f1e4ec06596f09a8b12235c701.1607076683.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/xmon: Change printk() to pr_cont()

commit 7c6c86b36a36dd4a13d30bba07718e767aa2e7a1 upstream.

Since some time now, printk() adds carriage return, leading to
unusable xmon output if there is no udbg backend available:

  [   54.288722] sysrq: Entering xmon
  [   54.292209] Vector: 0  at [cace3d2c]
  [   54.292274]     pc:
  [   54.292331] c0023650
  [   54.292468] : xmon+0x28/0x58
  [   54.292519]
  [   54.292574]     lr:
  [   54.292630] c0023724
  [   54.292749] : sysrq_handle_xmon+0xa4/0xfc
  [   54.292801]
  [   54.292867]     sp: cace3de8
  [   54.292931]    msr: 9032
  [   54.292999]   current = 0xc28d0000
  [   54.293072]     pid   = 377, comm = sh
  [   54.293157] Linux version 5.10.0-rc6-s3k-dev-01364-gedf13f0ccd76-dirty (root@po17688vm.idsi0.si.c-s.fr) (powerpc64-linux-gcc (GCC) 10.1.0, GNU ld (GNU Binutils) 2.34) #4211 PREEMPT Fri Dec 4 09:32:11 UTC 2020
  [   54.293287] enter ? for help
  [   54.293470] [cace3de8]
  [   54.293532] c0023724
  [   54.293654]  sysrq_handle_xmon+0xa4/0xfc
  [   54.293711]  (unreliable)
  ...
  [   54.296002]
  [   54.296159] --- Exception: c01 (System Call) at
  [   54.296217] 0fd4e784
  [   54.296303]
  [   54.296375] SP (7fca6ff0) is in userspace
  [   54.296431] mon>
  [   54.296484]  <no input ...>

Use pr_cont() instead.

Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Mention that it only happens when udbg is not available]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c8a6ec704416ecd5ff2bd26213c9bc026bdd19de.1607077340.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/feature: Add CPU_FTR_NOEXECUTE to G2_LE

commit 197493af414ee22427be3343637ac290a791925a upstream.

G2_LE has a 603 core, add CPU_FTR_NOEXECUTE.

Fixes: 385e89d5b20f ("powerpc/mm: add exec protection on powerpc 603")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/39a530ee41d83f49747ab3af8e39c056450b9b4d.1602489653.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/bitops: Fix possible undefined behaviour with fls() and fls64()

commit 1891ef21d92c4801ea082ee8ed478e304ddc6749 upstream.

fls() and fls64() are using __builtin_ctz() and _builtin_ctzll().
On powerpc, those builtins trivially use ctlzw and ctlzd power
instructions.

Allthough those instructions provide the expected result with
input argument 0, __builtin_ctz() and __builtin_ctzll() are
documented as undefined for value 0.

The easiest fix would be to use fls() and fls64() functions
defined in include/asm-generic/bitops/builtin-fls.h and
include/asm-generic/bitops/fls64.h, but GCC output is not optimal:

00000388 <testfls>:
388:   2c 03 00 00     cmpwi   r3,0
38c:   41 82 00 10     beq     39c <testfls+0x14>
390:   7c 63 00 34     cntlzw  r3,r3
394:   20 63 00 20     subfic  r3,r3,32
398:   4e 80 00 20     blr
39c:   38 60 00 00     li      r3,0
3a0:   4e 80 00 20     blr

000003b0 <testfls64>:
3b0:   2c 03 00 00     cmpwi   r3,0
3b4:   40 82 00 1c     bne     3d0 <testfls64+0x20>
3b8:   2f 84 00 00     cmpwi   cr7,r4,0
3bc:   38 60 00 00     li      r3,0
3c0:   4d 9e 00 20     beqlr   cr7
3c4:   7c 83 00 34     cntlzw  r3,r4
3c8:   20 63 00 20     subfic  r3,r3,32
3cc:   4e 80 00 20     blr
3d0:   7c 63 00 34     cntlzw  r3,r3
3d4:   20 63 00 40     subfic  r3,r3,64
3d8:   4e 80 00 20     blr

When the input of fls(x) is a constant, just check x for nullity and
return either 0 or __builtin_clz(x). Otherwise, use cntlzw instruction
directly.

For fls64() on PPC64, do the same but with __builtin_clzll() and
cntlzd instruction. On PPC32, lets take the generic fls64() which
will use our fls(). The result is as expected:

00000388 <testfls>:
388:   7c 63 00 34     cntlzw  r3,r3
38c:   20 63 00 20     subfic  r3,r3,32
390:   4e 80 00 20     blr

000003a0 <testfls64>:
3a0:   2c 03 00 00     cmpwi   r3,0
3a4:   40 82 00 10     bne     3b4 <testfls64+0x14>
3a8:   7c 83 00 34     cntlzw  r3,r4
3ac:   20 63 00 20     subfic  r3,r3,32
3b0:   4e 80 00 20     blr
3b4:   7c 63 00 34     cntlzw  r3,r3
3b8:   20 63 00 40     subfic  r3,r3,64
3bc:   4e 80 00 20     blr

Fixes: 2fcff790dcb4 ("powerpc: Use builtin functions for fls()/__fls()/fls64()")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/348c2d3f19ffcff8abe50d52513f989c4581d000.1603375524.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/rtas: Fix typo of ibm,open-errinjct in RTAS filter

commit f10881a46f8914428110d110140a455c66bdf27b upstream.

Commit bd59380c5ba4 ("powerpc/rtas: Restrict RTAS requests from userspace")
introduced the following error when invoking the errinjct userspace
tool:

  [root@ltcalpine2-lp5 librtas]# errinjct open
  [327884.071171] sys_rtas: RTAS call blocked - exploit attempt?
  [327884.071186] sys_rtas: token=0x26, nargs=0 (called by errinjct)
  errinjct: Could not open RTAS error injection facility
  errinjct: librtas: open: Unexpected I/O error

The entry for ibm,open-errinjct in rtas_filter array has a typo where
the "j" is omitted in the rtas call name. After fixing this typo the
errinjct tool functions again as expected.

  [root@ltcalpine2-lp5 linux]# errinjct open
  RTAS error injection facility open, token = 1

Fixes: bd59380c5ba4 ("powerpc/rtas: Restrict RTAS requests from userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201208195434.8289-1-tyreld@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Fix incorrect stw{, ux, u, x} instructions in __set_pte_at

commit d85be8a49e733dcd23674aa6202870d54bf5600d upstream.

The placeholder for instruction selection should use the second
argument's operand, which is %1, not %0. This could generate incorrect
assembly code if the memory addressing of operand %0 is a different
form from that of operand %1.

Also remove the %Un placeholder because having %Un placeholders
for two operands which are based on the same local var (ptep) doesn't
make much sense. By the way, it doesn't change the current behaviour
because "<>" constraint is missing for the associated "=m".

[chleroy: revised commit log iaw segher's comments and removed %U0]

Fixes: 9bf2b5cdc5fe ("powerpc: Fixes for CONFIG_PTE_64BIT for SMP support")
Cc: <stable@vger.kernel.org> # v2.6.28+
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/96354bd77977a6a933fe9020da57629007fdb920.1603358942.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/32: Fix vmap stack - Properly set r1 before activating MMU on syscall too

commit d5c243989fb0cb03c74d7340daca3b819f706ee7 upstream.

We need r1 to be properly set before activating MMU, otherwise any new
exception taken while saving registers into the stack in syscall
prologs will use the user stack, which is wrong and will even lockup
or crash when KUAP is selected.

Do that by switching the meaning of r11 and r1 until we have saved r1
to the stack: copy r1 into r11 and setup the new stack pointer in r1.
To avoid complicating and impacting all generic and specific prolog
code (and more), copy back r1 into r11 once r11 is save onto
the stack.

We could get rid of copying r1 back and forth at the cost of rewriting
everything to use r1 instead of r11 all the way when CONFIG_VMAP_STACK
is set, but the effort is probably not worth it for now.

Fixes: da7bb43ab9da ("powerpc/32: Fix vmap stack - Properly set r1 before activating MMU")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a3d819d5c348cee9783a311d5d3f3ba9b48fd219.1608531452.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xprtrdma: Fix XDRBUF_SPARSE_PAGES support

commit 15261b9126cd5bb2ad8521da49d8f5c042d904c7 upstream.

Olga K. observed that rpcrdma_marsh_req() allocates sparse pages
only when it has determined that a Reply chunk is necessary. There
are plenty of cases where no Reply chunk is needed, but the
XDRBUF_SPARSE_PAGES flag is set. The result would be a crash in
rpcrdma_inline_fixup() when it tries to copy parts of the received
Reply into a missing page.

To avoid crashing, handle sparse page allocation up front.

Until XATTR support was added, this issue did not appear often
because the only SPARSE_PAGES consumer always expected a reply large
enough to always require a Reply chunk.

Reported-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: tegra: Populate OPP table for Tegra20 Ventana

commit bd7cd7e05a42491469ca19861da44abc3168cf5f upstream.

Commit 9ce274630495 ("cpufreq: tegra20: Use generic cpufreq-dt driver
(Tegra30 supported now)") update the Tegra20 CPUFREQ driver to use the
generic CPUFREQ device-tree driver. Since this change CPUFREQ support
on the Tegra20 Ventana platform has been broken because the necessary
device-tree nodes with the operating point information are not populated
for this platform. Fix this by updating device-tree for Venata to
include the operating point informration for Tegra20.

Fixes: 9ce274630495 ("cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)")
Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: at91: sama5d2: fix CAN message ram offset and size

commit 85b8350ae99d1300eb6dc072459246c2649a8e50 upstream.

CAN0 and CAN1 instances share the same message ram configured
at 0x210000 on sama5d2 Linux systems.
According to current configuration of CAN0, we need 0x1c00 bytes
so that the CAN1 don't overlap its message ram:
64 x RX FIFO0 elements => 64 x 72 bytes
32 x TXE (TX Event FIFO) elements => 32 x 8 bytes
32 x TXB (TX Buffer) elements => 32 x 72 bytes
So a total of 7168 bytes (0x1C00).

Fix offset to match this needed size.
Make the CAN0 message ram ioremap match exactly this size so that is
easily understandable. Adapt CAN1 size accordingly.

Fixes: bc6d5d7666b7 ("ARM: dts: at91: sama5d2: add m_can nodes")
Reported-by: Dan Sneddon <dan.sneddon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Cristian Birsan <cristian.birsan@microchip.com>
Cc: stable@vger.kernel.org # v4.13+
Link: https://lore.kernel.org/r/20201203091949.9015-1-nicolas.ferre@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: pandaboard: fix pinmux for gpio user button of Pandaboard ES

commit df9dbaf2c415cd94ad520067a1eccfee62f00a33 upstream.

The pinmux control register offset passed to OMAP4_IOPAD is odd.

Fixes: ab9a13665e7c ("ARM: dts: pandaboard: add gpio user button")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu-qcom: Implement S2CR quirk

commit f9081b8ff5934b8d69c748d0200e844cadd2c667 upstream.

The firmware found in some Qualcomm platforms intercepts writes to S2CR
in order to replace bypass type streams with fault; and ignore S2CR
updates of type fault.

Detect this behavior and implement a custom write_s2cr function in order
to trick the firmware into supporting bypass streams by the means of
configuring the stream for translation using a reserved and disabled
context bank.

Also circumvent the problem of configuring faulting streams by
configuring the stream as bypass.

Cc: <stable@vger.kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20201019182323.3162386-4-bjorn.andersson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu-qcom: Read back stream mappings

commit 07a7f2caaa5a2619934491bab3c47b261c554fb0 upstream.

The Qualcomm boot loader configures stream mapping for the peripherals
that it accesses and in particular it sets up the stream mapping for the
display controller to be allowed to scan out a splash screen or EFI
framebuffer.

Read back the stream mappings during initialization and make the
arm-smmu driver maintain the streams in bypass mode.

Cc: <stable@vger.kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20201019182323.3162386-3-bjorn.andersson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu: Allow implementation specific write_s2cr

commit 56b75b51ed6d5e7bffda59440404409bca2dff00 upstream.

The firmware found in some Qualcomm platforms intercepts writes to the
S2CR register in order to replace the BYPASS type with FAULT. Further
more it treats faults at this level as catastrophic and restarts the
device.

Add support for providing implementation specific versions of the S2CR
write function, to allow the Qualcomm driver to work around this
behavior.

Cc: <stable@vger.kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20201019182323.3162386-2-bjorn.andersson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Remove the call to sev_platform_status() during setup

commit 9d4747d02376aeb8de38afa25430de79129c5799 upstream.

When both KVM support and the CCP driver are built into the kernel instead
of as modules, KVM initialization can happen before CCP initialization. As
a result, sev_platform_status() will return a failure when it is called
from sev_hardware_setup(), when this isn't really an error condition.

Since sev_platform_status() doesn't need to be called at this time anyway,
remove the invocation from sev_hardware_setup().

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <618380488358b56af558f2682203786f09a49483.1607620209.git.thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: reinstate vendor-agnostic check on SPEC_CTRL cpuid bits

commit 39485ed95d6b83b62fa75c06c2c4d33992e0d971 upstream.

Until commit e7c587da1252 ("x86/speculation: Use synthetic bits for
IBRS/IBPB/STIBP"), KVM was testing both Intel and AMD CPUID bits before
allowing the guest to write MSR_IA32_SPEC_CTRL and MSR_IA32_PRED_CMD.
Testing only Intel bits on VMX processors, or only AMD bits on SVM
processors, fails if the guests are created with the "opposite" vendor
as the host.

While at it, also tweak the host CPU check to use the vendor-agnostic
feature bit X86_FEATURE_IBPB, since we only care about the availability
of the MSR on the host here and not about specific CPUID bits.

Fixes: e7c587da1252 ("x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP")
Cc: stable@vger.kernel.org
Reported-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Introduce handling of AArch32 TTBCR2 traps

commit ca4e514774930f30b66375a974b5edcbebaf0e7e upstream.

ARMv8.2 introduced TTBCR2, which shares TCR_EL1 with TTBCR.
Gracefully handle traps to this register when HCR_EL2.TVM is set.

Cc: stable@vger.kernel.org
Reported-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: marvell: keep SMMU disabled by default for Armada 7040 and 8040

commit f43cadef2df260101497a6aace05e24201f00202 upstream.

FW has to configure devices' StreamIDs so that SMMU is able to lookup
context and do proper translation later on. For Armada 7040 & 8040 and
publicly available FW, most of the devices are configured properly,
but some like ap_sdhci0, PCIe, NIC still remain unassigned which
results in SMMU faults about unmatched StreamID (assuming
ARM_SMMU_DISABLE_BYPASS_BY_DEFAUL=y).

Since there is dependency on custom FW let SMMU be disabled by default.
People who still willing to use SMMU need to enable manually and
use ARM_SMMU_DISABLE_BYPASS_BY_DEFAUL=n (or via kernel command line)
with extra caution.

Fixes: 83a3545d9c37 ("arm64: dts: marvell: add SMMU support")
Cc: <stable@vger.kernel.org> # 5.9+
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: ti: k3-am65: mark dss as dma-coherent

commit 50301e8815c681bc5de8ca7050c4b426923d4e19 upstream.

DSS is IO coherent on AM65, so we should mark it as such with
'dma-coherent' property in the DT file.

Fixes: fc539b90eda2 ("arm64: dts: ti: am654: Add DSS node")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Cc: stable@vger.kernel.org # v5.8+
Link: https://lore.kernel.org/r/20201102134650.55321-1-tomi.valkeinen@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RISC-V: Fix usage of memblock_enforce_memory_limit

commit de043da0b9e71147ca610ed542d34858aadfc61c upstream.

memblock_enforce_memory_limit accepts the maximum memory size not the
maximum address that can be handled by kernel. Fix the function invocation
accordingly.

Fixes: 1bd14a66ee52 ("RISC-V: Remove any memblock representing unusable memory area")
Cc: stable@vger.kernel.org
Reported-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: don't remount read-only with errors=continue on reboot

commit b08070eca9e247f60ab39d79b2c25d274750441f upstream.

ext4_handle_error() with errors=continue mount option can accidentally
remount the filesystem read-only when the system is rebooting. Fix that.

Fixes: 1dc1097ff60e ("ext4: avoid panic during forced reboot")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20201127113405.26867-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix deadlock with fs freezing and EA inodes

commit 46e294efc355c48d1dd4d58501aa56dac461792a upstream.

Xattr code using inodes with large xattr data can end up dropping last
inode reference (and thus deleting the inode) from places like
ext4_xattr_set_entry(). That function is called with transaction started
and so ext4_evict_inode() can deadlock against fs freezing like:

CPU1 CPU2

removexattr() freeze_super()
  vfs_removexattr()
    ext4_xattr_set()
      handle = ext4_journal_start()
      ...
      ext4_xattr_set_entry()
        iput(old_ea_inode)
          ext4_evict_inode(old_ea_inode)
  sb->s_writers.frozen = SB_FREEZE_FS;
  sb_wait_write(sb, SB_FREEZE_FS);
  ext4_freeze()
    jbd2_journal_lock_updates()
      -> blocks waiting for all
         handles to stop
            sb_start_intwrite()
      -> blocks as sb is already in SB_FREEZE_FS state

Generally it is advisable to delete inodes from a separate transaction
as it can consume quite some credits however in this case it would be
quite clumsy and furthermore the credits for inode deletion are quite
limited and already accounted for. So just tweak ext4_evict_inode() to
avoid freeze protection if we have transaction already started and thus
it is not really needed anyway.

Cc: stable@vger.kernel.org
Fixes: dec214d00e0d ("ext4: xattr inode deduplication")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201127110649.24730-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix a memory leak of ext4_free_data

commit cca415537244f6102cbb09b5b90db6ae2c953bdd upstream.

When freeing metadata, we will create an ext4_free_data and
insert it into the pending free list. After the current
transaction is committed, the object will be freed.

ext4_mb_free_metadata() will check whether the area to be freed
overlaps with the pending free list. If true, return directly. At this
time, ext4_free_data is leaked. Fortunately, the probability of this
problem is small, since it only occurs if the file system is corrupted
such that a block is claimed by more one inode and those inodes are
deleted within a single jbd2 transaction.

Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/1604764698-4269-8-git-send-email-brookxu@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix an IS_ERR() vs NULL check

commit bc18546bf68e47996a359d2533168d5770a22024 upstream.

The ext4_find_extent() function never returns NULL, it returns error
pointers.

Fixes: 44059e503b03 ("ext4: fast commit recovery path")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201023112232.GB282278@mwanda
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix race when defragmenting leads to unnecessary IO

commit 7f458a3873ae94efe1f37c8b96c97e7298769e98 upstream.

When defragmenting we skip ranges that have holes or inline extents, so that
we don't do unnecessary IO and waste space. We do this check when calling
should_defrag_range() at btrfs_defrag_file(). However we do it without
holding the inode's lock. The reason we do it like this is to avoid
blocking other tasks for too long, that possibly want to operate on other
file ranges, since after the call to should_defrag_range() and before
locking the inode, we trigger a synchronous page cache readahead. However
before we were able to lock the inode, some other task might have punched
a hole in our range, or we may now have an inline extent there, in which
case we should not set the range for defrag anymore since that would cause
unnecessary IO and make us waste space (i.e. allocating extents to contain
zeros for a hole).

So after we locked the inode and the range in the iotree, check again if
we have holes or an inline extent, and if we do, just skip the range.

I hit this while testing my next patch that fixes races when updating an
inode's number of bytes (subject "btrfs: update the number of bytes used
by an inode atomically"), and it depends on this change in order to work
correctly. Alternatively I could rework that other patch to detect holes
and flag their range with the 'new delalloc' bit, but this itself fixes
an efficiency problem due a race that from a functional point of view is
not harmful (it could be triggered with btrfs/062 from fstests).

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: update last_byte_to_unpin in switch_commit_roots

commit 27d56e62e4748c2135650c260024e9904b8c1a0a upstream.

While writing an explanation for the need of the commit_root_sem for
btrfs_prepare_extent_commit, I realized we have a slight hole that could
result in leaked space if we have to do the old style caching.  Consider
the following scenario

commit root
+----+----+----+----+----+----+----+
|\\\\|    |\\\\|\\\\|    |\\\\|\\\\|
+----+----+----+----+----+----+----+
0    1    2    3    4    5    6    7

new commit root
+----+----+----+----+----+----+----+
|    |    |    |\\\\|    |    |\\\\|
+----+----+----+----+----+----+----+
0    1    2    3    4    5    6    7

Prior to this patch, we run btrfs_prepare_extent_commit, which updates
the last_byte_to_unpin, and then we subsequently run
switch_commit_roots.  In this example lets assume that
caching_ctl->progress == 1 at btrfs_prepare_extent_commit() time, which
means that cache->last_byte_to_unpin == 1.  Then we go and do the
switch_commit_roots(), but in the meantime the caching thread has made
some more progress, because we drop the commit_root_sem and re-acquired
it.  Now caching_ctl->progress == 3.  We swap out the commit root and
carry on to unpin.

The race can happen like:

  1) The caching thread was running using the old commit root when it
     found the extent for [2, 3);

  2) Then it released the commit_root_sem because it was in the last
     item of a leaf and the semaphore was contended, and set ->progress
     to 3 (value of 'last'), as the last extent item in the current leaf
     was for the extent for range [2, 3);

  3) Next time it gets the commit_root_sem, will start using the new
     commit root and search for a key with offset 3, so it never finds
     the hole for [2, 3).

  So the caching thread never saw [2, 3) as free space in any of the
  commit roots, and by the time finish_extent_commit() was called for
  the range [0, 3), ->last_byte_to_unpin was 1, so it only returned the
  subrange [0, 1) to the free space cache, skipping [2, 3).

In the unpin code we have last_byte_to_unpin == 1, so we unpin [0,1),
but do not unpin [2,3).  However because caching_ctl->progress == 3 we
do not see the newly freed section of [2,3), and thus do not add it to
our free space cache.  This results in us missing a chunk of free space
in memory (on disk too, unless we have a power failure before writing
the free space cache to disk).

Fix this by making sure the ->last_byte_to_unpin is set at the same time
that we swap the commit roots, this ensures that we will always be
consistent.

CC: stable@vger.kernel.org # 5.8+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ update changelog with Filipe's review comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: do not shorten unpin len for caching block groups

commit 9076dbd5ee837c3882fc42891c14cecd0354a849 upstream.

While fixing up our ->last_byte_to_unpin locking I noticed that we will
shorten len based on ->last_byte_to_unpin if we're caching when we're
adding back the free space. This is correct for the free space, as we
cannot unpin more than ->last_byte_to_unpin, however we use len to
adjust the ->bytes_pinned counters and such, which need to track the
actual pinned usage. This could result in
WARN_ON(space_info->bytes_pinned) triggering at unmount time.

Fix this by using a local variable for the amount to add to free space
cache, and leave len untouched in this case.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: keyspan_pda: fix write unthrottling

commit 320f9028c7873c3c7710e8e93e5c979f4c857490 upstream.

The driver did not update its view of the available device buffer space
until write() was called in task context. This meant that write_room()
would return 0 even after the device had sent a write-unthrottle
notification, something which could lead to blocked writers not being
woken up (e.g. when using OPOST).

Note that we must also request an unthrottle notification is case a
write() request fills the device buffer exactly.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: keyspan_pda: fix tx-unthrottle use-after-free

commit 49fbb8e37a961396a5b6c82937c70df91de45e9d upstream.

The driver's transmit-unthrottle work was never flushed on disconnect,
something which could lead to the driver port data being freed while the
unthrottle work is still scheduled.

Fix this by cancelling the unthrottle work when shutting down the port.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: keyspan_pda: fix write-wakeup use-after-free

commit 37faf50615412947868c49aee62f68233307f4e4 upstream.

The driver's deferred write wakeup was never flushed on disconnect,
something which could lead to the driver port data being freed while the
wakeup work is still scheduled.

Fix this by using the usb-serial write wakeup which gets cancelled
properly on disconnect.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: keyspan_pda: fix stalled writes

commit c01d2c58698f710c9e13ba3e2d296328606f74fd upstream.

Make sure to clear the write-busy flag also in case no new data was
submitted due to lack of device buffer space so that writing is
resumed once space again becomes available.

Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: keyspan_pda: fix write deadlock

commit 7353cad7ee4deaefc16e94727e69285563e219f6 upstream.

The write() callback can be called in interrupt context (e.g. when used
as a console) so interrupts must be disabled while holding the port lock
to prevent a possible deadlock.

Fixes: e81ee637e4ae ("usb-serial: possible irq lock inversion (PPP vs. usb/serial)")
Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.")
Cc: stable <stable@vger.kernel.org> # 2.6.19
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: keyspan_pda: fix dropped unthrottle interrupts

commit 696c541c8c6cfa05d65aa24ae2b9e720fc01766e upstream.

Commit c528fcb116e6 ("USB: serial: keyspan_pda: fix receive sanity
checks") broke write-unthrottle handling by dropping well-formed
unthrottle-interrupt packets which are precisely two bytes long. This
could lead to blocked writers not being woken up when buffer space again
becomes available.

Instead, stop unconditionally printing the third byte which is
(presumably) only valid on modem-line changes.

Fixes: c528fcb116e6 ("USB: serial: keyspan_pda: fix receive sanity checks")
Cc: stable <stable@vger.kernel.org> # 4.11
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: digi_acceleport: fix write-wakeup deadlocks

commit 5098e77962e7c8947f87bd8c5869c83e000a522a upstream.

The driver must not call tty_wakeup() while holding its private lock as
line disciplines are allowed to call back into write() from
write_wakeup(), leading to a deadlock.

Also remove the unneeded work struct that was used to defer wakeup in
order to work around a possible race in ancient times (see comment about
n_tty write_chan() in commit 14b54e39b412 ("USB: serial: remove
changelogs and old todo entries")).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: mos7720: fix parallel-port state restore

commit 975323ab8f116667676c30ca3502a6757bd89e8d upstream.

The parallel-port restore operations is called when a driver claims the
port and is supposed to restore the provided state (e.g. saved when
releasing the port).

Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715")
Cc: stable <stable@vger.kernel.org> # 2.6.35
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dyndbg: fix use before null check

commit 3577afb0052fca65e67efdfc8e0859bb7bac87a6 upstream.

In commit a2d375eda771 ("dyndbg: refine export, rename to
dynamic_debug_exec_queries()"), a string is copied before checking it
isn't NULL. Fix this, report a usage/interface error, and return the
proper error code.

Fixes: a2d375eda771 ("dyndbg: refine export, rename to dynamic_debug_exec_queries()")
Cc: stable@vger.kernel.org
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20201209183625.2432329-1-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuset: fix race between hotplug work and later CPU offline

commit 406100f3da08066c00105165db8520bbc7694a36 upstream.

One of our machines keeled over trying to rebuild the scheduler domains.
Mainline produces the same splat:

  BUG: unable to handle page fault for address: 0000607f820054db
  CPU: 2 PID: 149 Comm: kworker/1:1 Not tainted 5.10.0-rc1-master+ #6
  Workqueue: events cpuset_hotplug_workfn
  RIP: build_sched_domains
  Call Trace:
   partition_sched_domains_locked
   rebuild_sched_domains_locked
   cpuset_hotplug_workfn

It happens with cgroup2 and exclusive cpusets only.  This reproducer
triggers it on an 8-cpu vm and works most effectively with no
preexisting child cgroups:

  cd $UNIFIED_ROOT
  mkdir cg1
  echo 4-7 > cg1/cpuset.cpus
  echo root > cg1/cpuset.cpus.partition

  # with smt/control reading 'on',
  echo off > /sys/devices/system/cpu/smt/control

RIP maps to

  sd->shared = *per_cpu_ptr(sdd->sds, sd_id);

from sd_init().  sd_id is calculated earlier in the same function:

  cpumask_and(sched_domain_span(sd), cpu_map, tl->mask(cpu));
  sd_id = cpumask_first(sched_domain_span(sd));

tl->mask(cpu), which reads cpu_sibling_map on x86, returns an empty mask
and so cpumask_first() returns >= nr_cpu_ids, which leads to the bogus
value from per_cpu_ptr() above.

The problem is a race between cpuset_hotplug_workfn() and a later
offline of CPU N.  cpuset_hotplug_workfn() updates the effective masks
when N is still online, the offline clears N from cpu_sibling_map, and
then the worker uses the stale effective masks that still have N to
generate the scheduling domains, leading the worker to read
N's empty cpu_sibling_map in sd_init().

rebuild_sched_domains_locked() prevented the race during the cgroup2
cpuset series up until the Fixes commit changed its check.  Make the
check more robust so that it can detect an offline CPU in any exclusive
cpuset's effective mask, not just the top one.

Fixes: 0ccea8feb980 ("cpuset: Make generate_sched_domains() work with partition")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20201112171711.639541-1-daniel.m.jordan@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/amd64: Fix PCI component registration

commit 706657b1febf446a9ba37dc51b89f46604f57ee9 upstream.

In order to setup its PCI component, the driver needs any node private
instance in order to get a reference to the PCI device and hand that
into edac_pci_create_generic_ctl(). For convenience, it uses the 0th
memory controller descriptor under the assumption that if any, the 0th
will be always present.

However, this assumption goes wrong when the 0th node doesn't have
memory and the driver doesn't initialize an instance for it:

  EDAC amd64: F17h detected (node 0).
  ...
  EDAC amd64: Node 0: No DIMMs detected.

But looking up node instances is not really needed - all one needs is
the pointer to the proper device which gets discovered during instance
init.

So stash that pointer into a variable and use it when setting up the
EDAC PCI component.

Clear that variable when the driver needs to unwind due to some
instances failing init to avoid any registration imbalance.

Cc: <stable@vger.kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201122150815.13808-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/i10nm: Use readl() to access MMIO registers

commit 83ff51c4e3fecf6b8587ce4d46f6eac59f5d7c5a upstream.

Instead of raw access, use readl() to access MMIO registers of
memory controller to avoid possible compiler re-ordering.

Fixes: d4dc89d069aa ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Cc: <stable@vger.kernel.org>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: seqlock: s/LOCKTYPE/LOCKNAME/g

commit cf48647243cc28d15280600292db5777592606c5 upstream.

Sequence counters with an associated write serialization lock are called
seqcount_LOCKNAME_t. Fix the documentation accordingly.

While at it, remove a paragraph that inappropriately discussed a
seqlock.h implementation detail.

Fixes: 6dd699b13d53 ("seqlock: seqcount_LOCKNAME_t: Standardize naming convention")
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20201206162143.14387-2-a.darwish@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

m68k: Fix WARNING splat in pmac_zilog driver

commit a7b5458ce73b235be027cf2658c39b19b7e58cf2 upstream.

Don't add platform resources that won't be used. This avoids a
recently-added warning from the driver core, that can show up on a
multi-platform kernel when !MACH_IS_MAC.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at drivers/base/platform.c:224 platform_get_irq_optional+0x8e/0xce
0 is an invalid IRQ number
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.9.0-multi #1
Stack from 004b3f04:
        004b3f04 00462c2f 00462c2f 004b3f20 0002e128 004754db 004b6ad4 004b3f4c
        0002e19c 004754f7 000000e0 00285ba0 00000009 00000000 004b3f44 ffffffff
        004754db 004b3f64 004b3f74 00285ba0 004754f7 000000e0 00000009 004754db
        004fdf0c 005269e2 004fdf0c 00000000 004b3f88 00285cae 004b6964 00000000
        004fdf0c 004b3fac 0051cc68 004b6964 00000000 004b6964 00000200 00000000
        0051cc3e 0023c18a 004b3fc0 0051cd8a 004fdf0c 00000002 0052b43c 004b3fc8
Call Trace: [<0002e128>] __warn+0xa6/0xd6
[<0002e19c>] warn_slowpath_fmt+0x44/0x76
[<00285ba0>] platform_get_irq_optional+0x8e/0xce
[<00285ba0>] platform_get_irq_optional+0x8e/0xce
[<00285cae>] platform_get_irq+0x12/0x4c
[<0051cc68>] pmz_init_port+0x2a/0xa6
[<0051cc3e>] pmz_init_port+0x0/0xa6
[<0023c18a>] strlen+0x0/0x22
[<0051cd8a>] pmz_probe+0x34/0x88
[<0051cde6>] pmz_console_init+0x8/0x28
[<00511776>] console_init+0x1e/0x28
[<0005a3bc>] printk+0x0/0x16
[<0050a8a6>] start_kernel+0x368/0x4ce
[<005094f8>] _sinittext+0x4f8/0xc48
random: get_random_bytes called from print_oops_end_marker+0x56/0x80 with crng_init=0
---[ end trace 392d8e82eed68d6c ]---

Commit a85a6c86c25b ("driver core: platform: Clarify that IRQ 0 is invalid"),
which introduced the WARNING, suggests that testing for irq == 0 is
undesirable. Instead of that comparison, just test for resource existence.

Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Joshua Thompson <funaho@jurai.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: stable@vger.kernel.org # v5.8+
Reported-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Link: https://lore.kernel.org/r/0c0fe1e4f11ccec202d4df09ea7d9d98155d101a.1606001297.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata

commit f3456b9fd269c6d0c973b136c5449d46b2510f4b upstream.

ARM Cortex-A57 and Cortex-A72 cores running in 32-bit mode are affected
by silicon errata #1742098 and #1655431, respectively, where the second
instruction of a AES instruction pair may execute twice if an interrupt
is taken right after the first instruction consumes an input register of
which a single 32-bit lane has been updated the last time it was modified.

This is not such a rare occurrence as it may seem: in counter mode, only
the least significant 32-bit word is incremented in the absence of a
carry, which makes our counter mode implementation susceptible to these
errata.

So let's shuffle the counter assignments around a bit so that the most
recent updates when the AES instruction pair executes are 128-bit wide.

[0] ARM-EPM-049219 v23 Cortex-A57 MPCore Software Developers Errata Notice
[1] ARM-EPM-012079 v11.0 Cortex-A72 MPCore Software Developers Errata Notice

Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()

commit 17858b140bf49961b71d4e73f1c3ea9bc8e7dda0 upstream.

ecdh_set_secret() casts a void* pointer to a const u64* in order to
feed it into ecc_is_key_valid(). This is not generally permitted by
the C standard, and leads to actual misalignment faults on ARMv6
cores. In some cases, these are fixed up in software, but this still
leads to performance hits that are entirely avoidable.

So let's copy the key into the ctx buffer first, which we will do
anyway in the common case, and which guarantees correct alignment.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: intel_pstate: Use most recent guaranteed performance values

commit e40ad84c26b4deeee46666492ec66b9a534b8e59 upstream.

When turbo has been disabled by the BIOS, but HWP_CAP.GUARANTEED is
changed later, user space may want to take advantage of this increased
guaranteed performance.

HWP_CAP.GUARANTEED is not a static value. It can be adjusted by an
out-of-band agent or during an Intel Speed Select performance level
change. The HWP_CAP.MAX is still the maximum achievable performance
with turbo disabled by the BIOS, so HWP_CAP.GUARANTEED can still
change as long as it remains less than or equal to HWP_CAP.MAX.

When HWP_CAP.GUARANTEED is changed, the sysfs base_frequency
attribute shows the most recent guaranteed frequency value. This
attribute can be used by user space software to update the scaling
min/max limits of the CPU.

Currently, the ->setpolicy() callback already uses the latest
HWP_CAP values when setting HWP_REQ, but the ->verify() callback will
restrict the user settings to the to old guaranteed performance value
which prevents user space from making use of the extra CPU capacity
theoretically available to it after increasing HWP_CAP.GUARANTEED.

To address this, read HWP_CAP in intel_pstate_verify_cpu_policy()
to obtain the maximum P-state that can be used and use that to
confine the policy max limit instead of using the cached and
possibly stale pstate.max_freq value for this purpose.

For consistency, update intel_pstate_update_perf_limits() to use the
maximum available P-state returned by intel_pstate_get_hwp_max() to
compute the maximum frequency instead of using the return value of
intel_pstate_get_max_freq() which, again, may be stale.

This issue is a side-effect of fixing the scaling frequency limits in
commit eacc9c5a927e ("cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max()
for turbo disabled") which corrected the setting of the reduced scaling
frequency values, but caused stale HWP_CAP.GUARANTEED to be used in
the case at hand.

Fixes: eacc9c5a927e ("cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.8+ <stable@vger.kernel.org> # 5.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Exclude kernel samples while counting events in user space.

commit aa8e21c053d72b6639ea5a7f1d3a1d0209534c94 upstream.

Perf event attritube supports exclude_kernel flag to avoid
sampling/profiling in supervisor state (kernel). Based on this event
attr flag, Monitor Mode Control Register bit is set to freeze on
supervisor state. But sometimes (due to hardware limitation), Sampled
Instruction Address Register (SIAR) locks on to kernel address even
when freeze on supervisor is set. Patch here adds a check to drop
those samples.

Cc: stable@vger.kernel.org
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1606289215-1433-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel/lbr: Fix the return type of get_lbr_cycles()

commit f8129cd958b395575e5543ce25a8434874b04d3a upstream.

The cycle count of a timed LBR is always 1 in perf record -D.

The cycle count is stored in the first 16 bits of the IA32_LBR_x_INFO
register, but the get_lbr_cycles() return Boolean type.

Use u16 to replace the Boolean type.

Fixes: 47125db27e47 ("perf/x86/intel/lbr: Support Architectural LBR")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20201125213720.15692-2-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Fix rtm_abort_event encoding on Ice Lake

commit 46b72e1bf4fc571da0c29c6fb3e5b2a2107a4c26 upstream.

According to the event list from icelake_core_v1.09.json, the encoding
of the RTM_RETIRED.ABORTED event on Ice Lake should be,
    "EventCode": "0xc9",
    "UMask": "0x04",
    "EventName": "RTM_RETIRED.ABORTED",

Correct the wrong encoding.

Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20201125213720.15692-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel: Add event constraint for CYCLE_ACTIVITY.STALLS_MEM_ANY

commit 306e3e91edf1c6739a55312edd110d298ff498dd upstream.

The event CYCLE_ACTIVITY.STALLS_MEM_ANY (0x14a3) should be available on
all 8 GP counters on ICL, but it's only scheduled on the first four
counters due to the current ICL constraint table.

Add a line for the CYCLE_ACTIVITY.STALLS_MEM_ANY event in the ICL
constraint table.
Correct the comments for the CYCLE_ACTIVITY.CYCLES_MEM_ANY event.

Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20201019164529.32154-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

z3fold: stricter locking and more careful reclaim

commit dcf5aedb24f899d537e21c18ea552c780598d352 upstream.

Use temporary slots in reclaim function to avoid possible race when
freeing those.

While at it, make sure we check CLAIMED flag under page lock in the
reclaim function to make sure we are not racing with z3fold_alloc().

Link: https://lkml.kernel.org/r/20201209145151.18994-4-vitaly.wool@konsulko.com
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: <stable@vger.kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

z3fold: simplify freeing slots

commit fc5488651c7d840c9cad9b0f273f2f31bd03413a upstream.

Patch series "z3fold: stability / rt fixes".

Address z3fold stability issues under stress load, primarily in the
reclaim and free aspects. Besides, it fixes the locking problems that
were only seen in real-time kernel configuration.

This patch (of 3):

There used to be two places in the code where slots could be freed, namely
when freeing the last allocated handle from the slots and when releasing
the z3fold header these slots aree linked to. The logic to decide on
whether to free certain slots was complicated and error prone in both
functions and it led to failures in RT case.

To fix that, make free_handle() the single point of freeing slots.

Link: https://lkml.kernel.org/r/20201209145151.18994-1-vitaly.wool@konsulko.com
Link: https://lkml.kernel.org/r/20201209145151.18994-2-vitaly.wool@konsulko.com
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Tested-by: Mike Galbraith <efault@gmx.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mf6x4: Fix AI end-of-conversion detection

commit 56c90457ebfe9422496aac6ef3d3f0f0ea8b2ec2 upstream.

I have had reports from two different people that attempts to read the
analog input channels of the MF624 board fail with an `ETIMEDOUT` error.

After triggering the conversion, the code calls `comedi_timeout()` with
`mf6x4_ai_eoc()` as the callback function to check if the conversion is
complete.  The callback returns 0 if complete or `-EBUSY` if not yet
complete.  `comedi_timeout()` returns `-ETIMEDOUT` if it has not
completed within a timeout period which is propagated as an error to the
user application.

The existing code considers the conversion to be complete when the EOLC
bit is high.  However, according to the user manuals for the MF624 and
MF634 boards, this test is incorrect because EOLC is an active low
signal that goes high when the conversion is triggered, and goes low
when the conversion is complete.  Fix the problem by inverting the test
of the EOLC bit state.

Fixes: 04b565021a83 ("comedi: Humusoft MF634 and MF624 DAQ cards driver")
Cc: <stable@vger.kernel.org> # v4.4+
Cc: Rostislav Lisovy <lisovy@gmail.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20201207145806.4046-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: AMD Raven/Renoir - fix the PCI probe (PCI revision)

commit 55d8e6a85bce21f748c42eedea63681219f70523 upstream.

The Raven and Renoir ACP can be distinguished by the PCI revision.
Let's do the check very early, otherwise the wrong probe code
can be run.

Link: https://lore.kernel.org/alsa-devel/2e4587f8-f602-cf23-4845-fd27a32b1cfc@amd.com/
Cc: <stable@kernel.org>
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20201208181233.2745726-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: AMD Renoir - add DMI table to avoid the ACP mic probe (broken BIOS)

commit 718c406e1ffaca4eac987b957bbb36ce1090797a upstream.

Users reported that some Lenovo AMD platforms do not have ACP microphone,
but the BIOS advertises it via ACPI.

This patch create a simple DMI table, where those machines with the broken
BIOS can be added. The DMI description for Lenovo IdeaPad 5 and
IdeaPad Flex 5 devices are added there.

Also describe the dmic_acpi_check kernel module parameter in a more
understandable way.

Cc: <stable@kernel.org>
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20201208171200.2737620-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: cx2072x: Fix doubly definitions of Playback and Capture streams

commit 0d024a8bec084205fdd9fa17479ba91f45f85db3 upstream.

The cx2072x codec driver defines multiple DAIs with the same stream
name "Playback" and "Capture". Although the current code works more
or less as is as the secondary streams are never used, it still leads
the error message like:
debugfs: File 'Playback' in directory 'dapm' already present!
debugfs: File 'Capture' in directory 'dapm' already present!

Fix it by renaming the secondary streams to unique names.

Fixes: a497a4363706 ("ASoC: Add support for Conexant CX2072X CODEC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201208135154.9188-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: add flag to clear buffer on txn complete

commit 0f966cba95c78029f491b433ea95ff38f414a761 upstream.

Add a per-transaction flag to indicate that the buffer
must be cleared when the transaction is complete to
prevent copies of sensitive data from being preserved
in memory.

Signed-off-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20201120233743.3617529-1-tkjos@google.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: fix list corruption of lcu list

commit 53a7f655834c7c335bf683f248208d4fbe4b47bc upstream.

In dasd_alias_disconnect_device_from_lcu the device is removed from any
list on the LCU. Afterwards the LCU is removed from the lcu list if it
does not contain devices any longer.

The lcu->lock protects the lcu from parallel updates. But to cancel all
workers and wait for completion the lcu->lock has to be unlocked.

If two devices are removed in parallel and both are removed from the LCU
the first device that takes the lcu->lock again will delete the LCU because
it is already empty but the second device also tries to free the LCU which
leads to a list corruption of the lcu list.

Fix by removing the device right before the lcu is checked without
unlocking the lcu->lock in between.

Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: fix list corruption of pavgroup group list

commit 0ede91f83aa335da1c3ec68eb0f9e228f269f6d8 upstream.

dasd_alias_add_device() moves devices to the active_devices list in case
of a scheduled LCU update regardless if they have previously been in a
pavgroup or not.

Example: device A and B are in the same pavgroup.

Device A has already been in a pavgroup and the private->pavgroup pointer
is set and points to a valid pavgroup. While going through dasd_add_device
it is moved from the pavgroup to the active_devices list.

In parallel device B might be removed from the same pavgroup in
remove_device_from_lcu() which in turn checks if the group is empty
and deletes it accordingly because device A has already been removed from
there.

When now device A enters remove_device_from_lcu() it is tried to remove it
from the pavgroup again because the pavgroup pointer is still set and again
the empty group will be cleaned up which leads to a list corruption.

Fix by setting private->pavgroup to NULL in dasd_add_device.

If the device has been the last device on the pavgroup an empty pavgroup
remains but this will be cleaned up by the scheduled lcu_update which
iterates over all existing pavgroups.

Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: prevent inconsistent LCU device data

commit a29ea01653493b94ea12bb2b89d1564a265081b6 upstream.

Prevent _lcu_update from adding a device to a pavgroup if the LCU still
requires an update. The data is not reliable any longer and in parallel
devices might have been moved on the lists already.
This might lead to list corruptions or invalid PAV grouping.
Only add devices to a pavgroup if the LCU is up to date. Additional steps
are taken by the scheduled lcu update.

Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: fix hanging device offline processing

commit 658a337a606f48b7ebe451591f7681d383fa115e upstream.

For an LCU update a read unit address configuration IO is required.
This is started using sleep_on(), which has early exit paths in case the
device is not usable for IO. For example when it is in offline processing.

In those cases the LCU update should fail and not be retried.
Therefore lcu_update_work checks if EOPNOTSUPP is returned or not.

Commit 41995342b40c ("s390/dasd: fix endless loop after read unit address configuration")
accidentally removed the EOPNOTSUPP return code from
read_unit_address_configuration(), which in turn might lead to an endless
loop of the LCU update in offline processing.

Fix by returning EOPNOTSUPP again if the device is not able to perform the
request.

Fixes: 41995342b40c ("s390/dasd: fix endless loop after read unit address configuration")
Cc: stable@vger.kernel.org #5.3
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/idle: fix accounting with machine checks

commit 454efcf82ea17d7efeb86ebaa20775a21ec87d27 upstream.

When a machine check interrupt is triggered during idle, the code
is using the async timer/clock for idle time calculation. It should use
the machine check enter timer/clock which is passed to the macro.

Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S")
Cc: <stable@vger.kernel.org> # 5.8
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/idle: add missing mt_cycles calculation

commit e259b3fafa7de362b04ecd86e7fa9a9e9273e5fb upstream.

During removal of the critical section cleanup the calculation
of mt_cycles during idle was removed. This causes invalid
accounting on systems with SMT enabled.

Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S")
Cc: <stable@vger.kernel.org> # 5.8
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kexec_file: fix diag308 subcode when loading crash kernel

commit 613775d62ec60202f98d2c5f520e6e9ba6dd4ac4 upstream.

diag308 subcode 0 performes a clear reset which inlcudes the reset of
all registers in the system. While this is the preferred behavior when
loading a normal kernel via kexec it prevents the crash kernel to store
the register values in the dump. To prevent this use subcode 1 when
loading a crash kernel instead.

Fixes: ee337f5469fd ("s390/kexec_file: Add crash support to image loader")
Cc: <stable@vger.kernel.org> # 4.17
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reported-by: Xiaoying Yan <yiyan@redhat.com>
Tested-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/smp: perform initial CPU reset also for SMT siblings

commit b5e438ebd7e808d1d2435159ac4742e01a94b8da upstream.

Not resetting the SMT siblings might leave them in unpredictable
state. One of the observed problems was that the CPU timer wasn't
reset and therefore large system time values where accounted during
CPU bringup.

Cc: <stable@kernel.org> # 4.0
Fixes: 10ad34bc76dfb ("s390: add SMT support")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: core: memalloc: add page alignment for iram

commit 74c64efa1557fef731b59eb813f115436d18078e upstream.

Since mmap for userspace is based on page alignment, add page alignment
for iram alloc from pool, otherwise, some good data located in the same
page of dmab->area maybe touched wrongly by userspace like pulseaudio.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1608221747-3474-1-git-send-email-yibin.gong@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add alias entry for ASUS PRIME TRX40 PRO-S

commit 525d9c57d0eeeb660d9b25e5b2d1c95975e3ba95 upstream.

ASUS PRIME TRX40 PRO-S mobo with 0b05:1918 needs the same quirk alias
for another ASUS mobo (0b05:1917) for the proper mixer mapping, etc.
Add the corresponding entry.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210783
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201221080159.24468-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Disable sample read check if firmware doesn't give back

commit 9df28edce7c6ab38050235f6f8b43dd7ccd01b6d upstream.

Some buggy firmware don't give the current sample rate but leaves
zero. Handle this case more gracefully without warning but just skip
the current rate verification from the next time.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201218145858.2357-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add VID to support native DSD reproduction on FiiO devices

commit 725124d10d00b2f56bb5bd08b431cc74ab3b3ace upstream.

Add VID to support native DSD reproduction on FiiO devices.

Tested-by: Amadej Kastelic <amadejkastelic7@gmail.com>
Signed-off-by: Emilio Moretti <emilio.moretti@gmail.com>
Signed-off-by: Amadej Kastelic <amadejkastelic7@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/X9j7wdXSr4XyK7Bd@ryzen.localdomain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Supported Dell fixed type headset

commit 150927c3674d7db4dd51a7269e01423c8c78e53b upstream.

This platform only supported iphone type headset.
It can't support Dell headset mode.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/b97e971978034bc9b772a08ec91265e8@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Remove dummy lineout on Acer TravelMate P648/P658

commit 34cdf405aa5de827b8bef79a6c82c39120b3729b upstream.

Acer TravelMate laptops P648/P658 series with codec ALC282 only have
one physical jack for headset but there's a confusing lineout pin on
NID 0x1b reported. Audio applications hence misunderstand that there
are a speaker and a lineout, and take the lineout as the default audio
output.

Add a new quirk to remove the useless lineout and enable the pin 0x18
for jack sensing and headset microphone.

Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201216125200.27053-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Apply jack fixup for Quanta NL3

commit 6ca653e3f73a1af0f30dbf9c2c79d2897074989f upstream.

The Quanta NL3 laptop has both a headphone output jack and a headset
jack, on the right edge of the chassis.

The pin information suggests that both of these are at the Front.
The PulseAudio is confused to differentiate them so one of the jack
can neither get the jack sense working nor the audio output.

The ALC269_FIXUP_LIFEBOOK chained with ALC269_FIXUP_QUANTA_MUTE can
help to differentiate 2 jacks and get the 'Auto-Mute Mode' working
correctly.

Signed-off-by: Chris Chiu <chiu@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201222150459.9545-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>