kami911 [Thu, 1 Oct 2009 08:46:05 +0000 (08:46 +0000)]
Sending translation for po/hu.po
pmkovar [Wed, 30 Sep 2009 18:43:00 +0000 (18:43 +0000)]
Sending translation for Czech
raven [Wed, 30 Sep 2009 15:05:36 +0000 (15:05 +0000)]
Sending translation for Polish
warrink [Wed, 30 Sep 2009 14:48:45 +0000 (14:48 +0000)]
Sending translation for Dutch
Lennart Poettering [Sun, 21 Feb 2010 20:09:26 +0000 (21:09 +0100)]
pacat: pass buffer_attr to recording streams too
Pointed out by Colin Guthrie.
https://tango.0pointer.de/pipermail/pulseaudio-discuss/2010-February/006698.html
João Paulo Rechi Vita [Fri, 29 Jan 2010 13:01:31 +0000 (11:01 -0200)]
bluetooth: add HFP Gateway support
Create the 'Handsfree Gateway' profile for bluetooth cards and add
filters for 'org.bluez.HandsfreeGateway' to the discover module so
module-bluetooth-device is loaded with the correct profile when a
Handsfree Gateway connects to bluetoothd (in this case bluetoothd
is acting as the headset).
João Paulo Rechi Vita [Fri, 29 Jan 2010 12:59:33 +0000 (10:59 -0200)]
bluetooth: improve dbus logging
Lennart Poettering [Sun, 21 Feb 2010 19:11:23 +0000 (20:11 +0100)]
build-sys: fix check for pthread_setaffinity_np()
Daniel T Chen [Fri, 19 Feb 2010 05:23:17 +0000 (00:23 -0500)]
build-sys: Add missing profile and alsa-mixer/paths to src/Makefile.am
Commits e8cb96c and 0c836aa created mixer paths but did not update
src/Makefile.am. Building a snapshot containing these two commits
therefore results in the user being unable to adjust the volume or
(un)mute through PA. Fix this by adding the two new mixer paths
files to src/Makefile.am.
Likewise, commit 66e1a2d created a profile for the M-Audio FastTrack
Pro USB but did not update src/Makefile.am. Fix this by adding the
profile to src/Makefile.am.
Lennart Poettering [Thu, 18 Feb 2010 02:28:56 +0000 (03:28 +0100)]
pacmd: don't enter busy loop when reading from stdin very early
pointed out in:
https://tango.0pointer.de/pipermail/pulseaudio-discuss/2010-January/006365.html
Lennart Poettering [Thu, 14 Jan 2010 01:33:49 +0000 (02:33 +0100)]
daemon: first take name on the bus, then return in starter process
http://pulseaudio.org/ticket/748
Lennart Poettering [Sun, 21 Feb 2010 16:35:05 +0000 (17:35 +0100)]
scache: when playing a sample from the cache make sure not queue them up when the sink is suspended
libcanberra already sets the appropriate flags for uncached sample
streams, we now need to make sure to set them for cached samples too.
Lennart Poettering [Sun, 21 Feb 2010 15:23:25 +0000 (16:23 +0100)]
sample-cache: use the sample name as unmodified fallback in the properties when playing a sample from the cache
Lennart Poettering [Sun, 21 Feb 2010 15:22:17 +0000 (16:22 +0100)]
stream-restore: be a little bit more verbose why we don't reastore a sink
Lennart Poettering [Sun, 21 Feb 2010 15:21:43 +0000 (16:21 +0100)]
proplist: explicitly mention a role 'test'
Lennart Poettering [Sun, 21 Feb 2010 15:21:13 +0000 (16:21 +0100)]
vala: fix wrapping of port setting calls
Lennart Poettering [Sun, 21 Feb 2010 15:19:40 +0000 (16:19 +0100)]
channelmap: Use "Subwoofer" as pretty name for LFE
The pretty name is suspposed to be understandable by non-technical
folks, and they are generally more used to the term "Subwoofer" than
"Low Frequency Emitter", so let's change the name here.
Lennart Poettering [Fri, 19 Feb 2010 02:32:00 +0000 (03:32 +0100)]
vala: fix definition of the GLib mainloop adapter
Lennart Poettering [Fri, 19 Feb 2010 02:31:46 +0000 (03:31 +0100)]
vala: fix definition of INVALID_INDEX
Lennart Poettering [Fri, 19 Feb 2010 02:29:36 +0000 (03:29 +0100)]
shm: don't complain about missing SHM segments
If two clients try to cleanup the SHM directory at the same time, they
might want to open and then delete the same segment at the same time, in
which case one client might win, the other one lose. In this case, don't
warn about ENOENT.
Lennart Poettering [Thu, 18 Feb 2010 01:32:35 +0000 (02:32 +0100)]
pacmd: store away fd type
Lennart Poettering [Thu, 18 Feb 2010 00:54:51 +0000 (01:54 +0100)]
pacat: always fully fulfill write requests
Make sure we always fulfill write requests from the server. If we don't
the server won't ask us again and playback will stay stuck.
https://tango.0pointer.de/pipermail/pulseaudio-discuss/2010-February/006611.html
Lennart Poettering [Tue, 16 Feb 2010 02:36:44 +0000 (03:36 +0100)]
fdsem: be more verbose when reading from eventfd fails.
Apperently reading from an eventfd can fail, which results in an assert
to be hit. I am not sure about the reason for the failure, but in
attempt to track down the issue the next time is hit this prints a more
useful log message.
https://bugzilla.redhat.com/attachment.cgi?id=386380
Lennart Poettering [Tue, 16 Feb 2010 01:49:44 +0000 (02:49 +0100)]
dbus: first restart timer, then dispatch it
This makes sure that we don't access the timer after it might have been
destroyed already from the dbus timeout callback.
https://bugzilla.redhat.com/attachment.cgi?id=389952
Lennart Poettering [Tue, 16 Feb 2010 01:03:45 +0000 (02:03 +0100)]
padsp: emulate /dev/audio, too
https://bugzilla.redhat.com/show_bug.cgi?id=561262
Lennart Poettering [Tue, 16 Feb 2010 00:43:00 +0000 (01:43 +0100)]
build-sys: add gobject to build dependencies
Since we call g_object_unref() we need to link against gobject in
compliance of the new Fedora implicit DSO linking policy.
Lennart Poettering [Mon, 15 Feb 2010 23:59:24 +0000 (00:59 +0100)]
alsa: use default output port names
instead of coming up with pointless aliases, reuse the already established
names, for second headphones, and second speakers.
Lennart Poettering [Mon, 15 Feb 2010 23:58:49 +0000 (00:58 +0100)]
alsa: cover "Internal Mic" elements
https://bugzilla.redhat.com/show_bug.cgi?id=562216
Lennart Poettering [Mon, 15 Feb 2010 22:39:12 +0000 (23:39 +0100)]
alsa: cover 'Shared Mic/Line in', 'Analog Source'
https://bugzilla.redhat.com/show_bug.cgi?id=558638
Lennart Poettering [Mon, 15 Feb 2010 21:23:39 +0000 (22:23 +0100)]
alsa: cover "Desktop Speaker" mixer elements
As exposed by really old Microsoft USB sound systems
Lennart Poettering [Sun, 21 Feb 2010 16:40:44 +0000 (17:40 +0100)]
Revert "pacat: Don't use any buffer attr if we don't set any latency/process time params"
This reverts commit
ff2091b2c47dfa7d9f1397627b72d9366b60f566.
Lennart Poettering [Sun, 21 Feb 2010 16:39:47 +0000 (17:39 +0100)]
pactl: implement pactl subscribe
This is a simple debugging tool which prints out subscription events
Pierre-Louis Bossart [Thu, 11 Feb 2010 21:46:41 +0000 (15:46 -0600)]
virtual-sink,source: enable virtual-source and virtual-sink
Pierre-Louis Bossart [Thu, 11 Feb 2010 21:45:35 +0000 (15:45 -0600)]
virtual-source: boilerplate virtual source for PCM processing on inputs
Pierre-Louis Bossart [Thu, 11 Feb 2010 21:44:11 +0000 (15:44 -0600)]
virutal-sink: boilerplate virtual sink to add PCM processing
Colin Guthrie [Thu, 11 Feb 2010 23:33:19 +0000 (23:33 +0000)]
pacat: Don't use any buffer attr if we don't set any latency/process time params
Lennart Poettering [Mon, 18 Jan 2010 00:33:04 +0000 (01:33 +0100)]
native: rework handling of seeks that depend on variables the client does not know anything about
All seeks/flushes that depend on the playback buffer read pointer cannot
be accounted for properly in the client since it does not know the
actual read pointer. Due to that the clients do not account for it at
all. We need do the same on the server side. And we did, but a little
bit too extreme. While we properly have not applied the changes to the
"request" counter we still do have to apply it to the "missing" counter.
This patch fixes that.
Lennart Poettering [Fri, 15 Jan 2010 00:25:42 +0000 (01:25 +0100)]
client: implement $PULSE_LATENCY_MSEC
This allows easy overriding of a clients latency setting for debugging
purposes.
http://pulseaudio.org/ticket/753
Lennart Poettering [Fri, 15 Jan 2010 00:25:21 +0000 (01:25 +0100)]
pacat: allow configuration of latency in msec
Lennart Poettering [Thu, 14 Jan 2010 19:31:00 +0000 (20:31 +0100)]
udev: use ID_MODEL_ENC instead of ID_MODEL if it is set
That way we should be able to make use of the nicer USB strings the USB
hw provides.
Fixes the issues pointed out in:
https://tango.0pointer.de/pipermail/pulseaudio-discuss/2010-January/006248.html
Lennart Poettering [Thu, 14 Jan 2010 01:53:50 +0000 (02:53 +0100)]
alsa: cover bass boost mixer element
http://pulseaudio.org/ticket/740
Lennart Poettering [Thu, 14 Jan 2010 01:06:52 +0000 (02:06 +0100)]
udev: rework modem detection a bit
Check every single pcm device of a card whether it is a modem.
Daniel T. Chen [Wed, 13 Jan 2010 23:57:27 +0000 (00:57 +0100)]
udev: handle sound cards with both modem and audio properly
http://pulseaudio.org/ticket/681
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/394500
Colin Guthrie [Wed, 13 Jan 2010 23:47:21 +0000 (23:47 +0000)]
alsa: Cover the 'Int Mic Boost' element.
This is not 100% ideal as we have not way to tie specific boosts to specific
inputs and this particular chipset (as noted in #772) appears to
support just that.
For the time being incorporate it into the normal boost logic.
See http://pulseaudio.org/ticket/772
Colin Guthrie [Wed, 13 Jan 2010 23:44:00 +0000 (23:44 +0000)]
alsa: cover Input Source:Int Mic
As seen on some HDA chips (e.g. Fujitsu Siemens S6410)
Refs http://pulseaudio.org/ticket/772
Lennart Poettering [Wed, 13 Jan 2010 19:31:17 +0000 (20:31 +0100)]
cpu: check for CMOV flag before using this intsruction in assembly
http://pulseaudio.org/ticket/776
Lennart Poettering [Wed, 13 Jan 2010 19:30:36 +0000 (20:30 +0100)]
alsa: ignore volume changes from the hw if we are not on the active console
Lennart Poettering [Wed, 13 Jan 2010 18:41:44 +0000 (19:41 +0100)]
udev: make sure we get events only for sound devices
Lennart Poettering [Wed, 13 Jan 2010 16:35:04 +0000 (17:35 +0100)]
log: add an easy way to disable log rate limiting
Should help with debuggin bugs like:
https://bugzilla.redhat.com/show_bug.cgi?id=554405
Lennart Poettering [Wed, 13 Jan 2010 16:24:37 +0000 (17:24 +0100)]
bluetooth: fix invalid memory access
When an GetProperties() reply arrives after we already deleted the
device structure for it make sure we don't accidentaly touch the
invalidated object.
https://bugzilla.redhat.com/show_bug.cgi?id=543205
Lennart Poettering [Tue, 12 Jan 2010 22:03:04 +0000 (23:03 +0100)]
once: make once related variables volatile
Lennart Poettering [Tue, 12 Jan 2010 22:01:24 +0000 (23:01 +0100)]
udev: don't forget to unref devices we are not interested in
https://bugzilla.redhat.com/show_bug.cgi?id=552932
Lennart Poettering [Tue, 12 Jan 2010 02:01:27 +0000 (03:01 +0100)]
client: verify connection state in pa_stream_connect_upload()
Make suer we check the connection state before going on, so that we can
rely that s->context->pstream is properly initialized.
https://bugzilla.redhat.com/show_bug.cgi?id=539500
Lennart Poettering [Tue, 12 Jan 2010 02:01:14 +0000 (03:01 +0100)]
client: detect forking in sample cache API, too
Lennart Poettering [Fri, 8 Jan 2010 22:44:42 +0000 (23:44 +0100)]
bluetooth: don't hit an assert if latency is queried for a stooped recording stream
https://bugzilla.redhat.com/show_bug.cgi?id=537422
Lennart Poettering [Fri, 8 Jan 2010 21:18:15 +0000 (22:18 +0100)]
bluetooth: destruct stream only if it is not already destructed
https://bugzilla.redhat.com/show_bug.cgi?id=551842
Lennart Poettering [Fri, 8 Jan 2010 20:51:30 +0000 (21:51 +0100)]
core: make sure we always return a valid memblock in sink_input_pop() callbacks
https://bugzilla.redhat.com/show_bug.cgi?id=553607
Lennart Poettering [Fri, 8 Jan 2010 19:07:34 +0000 (20:07 +0100)]
native: fix request counter miscalculations
Do not subtract bytes the client sends us beyond what we requested from
our missing bytes counter.
This was mostly a thinko that caused servers asking for too little data
when the client initially sent more data than requested, because that
data sent too much was accounted for twice.
This commit fixes this miscalculation.
http://bugzilla.redhat.com/show_bug.cgi?id=534130
Lennart Poettering [Fri, 8 Jan 2010 19:06:21 +0000 (20:06 +0100)]
dbus: remove filter functions only if they were actually set before
This fixes an assert when destructing modules that have not been fully
initialized.
https://bugzilla.redhat.com/show_bug.cgi?id=548525
Lennart Poettering [Mon, 23 Nov 2009 04:07:00 +0000 (05:07 +0100)]
bump soname
Lennart Poettering [Wed, 11 Nov 2009 04:32:24 +0000 (05:32 +0100)]
build-sys: bump soname
Colin Guthrie [Tue, 9 Feb 2010 21:37:32 +0000 (21:37 +0000)]
core: Fix macro typo - PA_SINK_IS_LINKED -> PA_SINK_INPUT_IS_LINKED
Colin Guthrie [Fri, 5 Feb 2010 00:15:38 +0000 (00:15 +0000)]
stream-restore: Clear the save_sink/save_source flags on apply_entry.
If the user specifically removes the device element from the stream
restore rule, we have to clear the save_sink/save_source flag of the
stream. This means that other stream routing systems
(e.g. module-device-manager) can take over routing for this
stream. In order to facilitate the reapplication of other routing
rules, we fire a stream change event. Arguably the stream itself
has not changed, but the rules governing its routing have, so
I feel this is justified.
Daniel Mack [Tue, 2 Feb 2010 10:30:09 +0000 (18:30 +0800)]
osx: don't build the once-test binary on OS X
OS X lacks the barrier pthread APIs
Paul Menzel [Sat, 30 Jan 2010 12:59:52 +0000 (13:59 +0100)]
client.conf.in: Typo. s/a/are/
This is the same typo as reported in [1] and fixed in [2] in `client.conf.in`.
I did `git grep "values a commented"` and did not get anymore hits.
[1] http://pulseaudio.org/ticket/783
[2] http://git.0pointer.de/?p=pulseaudio.git;a=commit;h=
ea8927f1d47be101a1f64b2f87fd6e527ff76dbe
Paul Menzel [Sun, 31 Jan 2010 11:44:59 +0000 (12:44 +0100)]
man pages: correct formatting/markup of options
Lennart Poettering [Tue, 2 Feb 2010 07:51:44 +0000 (08:51 +0100)]
shm: explicitly mark shm seg for MAP_NORESERVE to request overcommiting no matter what
Paul Menzel [Thu, 21 Jan 2010 12:11:56 +0000 (13:11 +0100)]
Typo. s/a/are/
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Lennart Poettering [Thu, 14 Jan 2010 20:32:26 +0000 (21:32 +0100)]
client: include dolby channel names in comments
Lennart Poettering [Thu, 14 Jan 2010 19:33:40 +0000 (20:33 +0100)]
start: we don't need to check for $PULSE_SERVER anymore
pulseaudio --start does that internally anyway, so we can get rid of
this here.
Lennart Poettering [Wed, 13 Jan 2010 23:15:51 +0000 (00:15 +0100)]
native: when run in system mode, do not look for fallback port
Lennart Poettering [Wed, 13 Jan 2010 23:13:13 +0000 (00:13 +0100)]
native: fallback to another port if the default port is taken
Unless the port number is explicitly configured we will now fallback to
a kernel picked port if the one we'd like by default we cannot get.
http://pulseaudio.org/ticket/773
Lennart Poettering [Wed, 13 Jan 2010 21:15:52 +0000 (22:15 +0100)]
client: introduce auto-connect-display= following the scheme of auto-connect-localhost=
Just connecting to a PA server just because X11's $DISPLAY is set might
be a security hole.
Lennart Poettering [Wed, 13 Jan 2010 21:08:59 +0000 (22:08 +0100)]
client: introduce auto-connect-localhost= option in client.conf
Partly fixes:
http://pulseaudio.org/ticket/773
Also fixes a security hole since listening on the default port is not
access controlled right now.
Lennart Poettering [Wed, 13 Jan 2010 20:33:11 +0000 (21:33 +0100)]
Merge remote branch 'tanuk/fixes'
Lennart Poettering [Wed, 13 Jan 2010 16:40:31 +0000 (17:40 +0100)]
tests: add pa_once_xxx() test
Tanu Kaskinen [Sat, 9 Jan 2010 09:55:15 +0000 (11:55 +0200)]
daemon: Don't autospawn if a server address is explicitly configured.
Tanu Kaskinen [Wed, 6 Jan 2010 08:41:55 +0000 (10:41 +0200)]
sink-input: Replace a tab indentation with spaces.
Tanu Kaskinen [Wed, 27 May 2009 13:57:06 +0000 (16:57 +0300)]
idxset: Fix _get_by_data() comment.
huan zheng [Tue, 5 Jan 2010 23:21:07 +0000 (00:21 +0100)]
core: volume ramping fix
Hi,
I found that volume ramping is inside PA now.
there's a minor fix here, it is a bug i found after the patch is submitted:
line 1781 of sink-input.c :
if ((i->thread_info.ramp_info.envelope_dying - nbytes) <= 0) {
need to be changed to
if ((i->thread_info.ramp_info.envelope_dying - (ssize_t) nbytes) <= 0) {
otherwise this argument will never be negative since nbytes is of type
size_t which is unsigned.
Please change it when you have time, sorry if bring any inconvenience. :)
Lennart Poettering [Tue, 5 Jan 2010 21:52:57 +0000 (22:52 +0100)]
Merge remote branch 'zonque/topic/osx'
Daniel Mack [Thu, 10 Dec 2009 07:43:58 +0000 (15:43 +0800)]
fix a number of warnings
most of them were due to missing #ifdefs or wrong printf format type for
[s]size_t.
Mads Kiilerich [Fri, 11 Dec 2009 15:20:31 +0000 (16:20 +0100)]
headers: Some trivial fixes for some documentation typos
Note also the willneed/will_need inconsistency. I guess it could be nice to ASAP
choose one of them and introduce a backward compatibility hack for the other.
The issues was mostly found with:
for a in $(grep -r '^[ /]\*.*()' $(
find -name '*.[ch]') |
sed 's,^.* \([^ ]*\)().*$,\1,g' |
sort |
uniq |
grep ^pa_)
do
grep -rq "^.[^*].*\<$a(" $(find * -name '*.h') || echo $a
done
Pierre-Louis Bossart [Wed, 23 Dec 2009 19:57:03 +0000 (13:57 -0600)]
Subject: rtpoll: better support for DEBUG_TIMING logs
On all the platforms I tested, PulseAudio is frequently awaken and
doesn't sleep for the duration specified for the poll timeout.
Sometimes wake-ups occur within milliseconds of the poll call for no
good reason; this seems to be related to ALSA issues (see my posts on
the ALSA mailing list on null poll events).
This patch enables a better log of requested sleep times v. actual
sleep times. Enable DEBUG_TIMING to see actual messages. Please let me
know if you see odd behaviors like the one below
- Pierre
E: rtpoll.c: rtpoll_run
E: rtpoll.c: poll timeout: 188 ms
E: rtpoll.c: Process time 0 ms; sleep time 48 ms
E: rtpoll.c: rtpoll_run
E: rtpoll.c: rtpoll finish
E: rtpoll.c: rtpoll_run
E: rtpoll.c: poll timeout: 139 ms
E: rtpoll.c: Process time 0 ms; sleep time 49 ms
E: rtpoll.c: rtpoll_run
E: rtpoll.c: rtpoll finish
E: rtpoll.c: rtpoll_run
E: rtpoll.c: poll timeout: 189 ms
E: rtpoll.c: Process time 0 ms; sleep time 0 ms
E: rtpoll.c: rtpoll_run
E: rtpoll.c: rtpoll finish
E: rtpoll.c: rtpoll_run
E: rtpoll.c: poll timeout: 189 ms
E: rtpoll.c: Process time 0 ms; sleep time 49 ms
chocolateboy [Sat, 26 Dec 2009 01:46:32 +0000 (01:46 +0000)]
Fix typo in log message: s/may no be/may not be/
Hi, Lennart.
Spotted another typo. Patch attached.
Best wishes,
chocolateboy.
David Kågedal [Tue, 5 Jan 2010 19:14:11 +0000 (20:14 +0100)]
alsa: add profile set for M-Audio FastTrack Pro USB
Daniel T Chen [Tue, 5 Jan 2010 02:53:36 +0000 (21:53 -0500)]
udev: Use SOUND_CLASS instead of SOUND_FORM_FACTOR when checking for modem
The fact whether an ALSA card is a modem is stored in the SOUND_CLASS,
not the SOUND_FORM_FACTOR property. So read it from there.
Patch from Whoopie.
Daniel T Chen [Tue, 5 Jan 2010 02:44:37 +0000 (21:44 -0500)]
threaded-mainloop: Properly initialise m->n_waiting_for_accept to prevent deadlock
Compiler optimisations have been seen to initialise
m->n_waiting_for_accept to a positive non-zero value, so the while() in
pa_threaded_mainloop_signal() never proceeds. Fix this by properly
initializing m->n_waiting_for_accept in pa_threaded_mainloop_new().
Patch from Iain Bucław.
https://bugs.launchpad.net/bugs/502992
Daniel T Chen [Thu, 17 Dec 2009 04:55:05 +0000 (23:55 -0500)]
More src/pulsecore/cpu-arm.c FTBFS fixes
Fix missing argument to pa_read(), and be consistent with declaration of
state variable in pa_cpu_init_arm().
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Daniel T Chen [Thu, 17 Dec 2009 03:53:18 +0000 (22:53 -0500)]
Fix the following warnings (which now cause buildd failures in Ubuntu 10.04):
pulsecore/cpu-arm.c: In function 'get_cpuinfo':
pulsecore/cpu-arm.c:70: warning: implicit declaration of function 'pa_read' [-Wimplicit-function-declaration]
pulsecore/cpu-arm.c:72: warning: implicit declaration of function 'pa_close' [-Wimplicit-function-declaration]
pulsecore/cpu-arm.c: In function 'pa_cpu_init_arm':
pulsecore/cpu-arm.c:110: warning: implicit declaration of function 'pa_split_spaces' [-Wimplicit-function-declaration]
pulsecore/cpu-arm.c:110: warning: assignment makes pointer from integer without a cast
Function `pa_split_spaces' implicitly converted to pointer at pulsecore/cpu-arm.c:110
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Daniel Mack [Thu, 10 Dec 2009 07:42:40 +0000 (15:42 +0800)]
fix a number of warnings
most of them were due to missing #ifdefs or wrong printf format type for
[s]size_t.
Daniel Mack [Thu, 10 Dec 2009 02:32:57 +0000 (10:32 +0800)]
osx: add native zeroconf implementation via Bonjour
Avahi and dbus is too heavy for OSX just for the sake of publishing our
services via mDNS/Zeroconf. Apple has its own Zeroconf implementation
called Bonjour, and this patch adds a module that implements service
announcement with that API.
All data gathering is copied from module-zeroconf-publish.c, but
unfortunately the code there is too specifically made for avahi, so I
couldn't factor it out to reuse it.
Daniel Mack [Tue, 22 Sep 2009 03:27:57 +0000 (11:27 +0800)]
CoreAudio: add audio device module
This patch adds support for CoreAudio driven devices under Mac OS X. It
is typically instanciated by the CoreAudio device detection module and
handles all available streams on a specific device.
Sinks are created according to the reported stream configuration.
Float32 is used as default audio sample format at it is the only format
CoreAudio speaks natively.
Hardware volume control is not implemented yet.
Daniel Mack [Tue, 22 Sep 2009 03:10:26 +0000 (11:10 +0800)]
CoreAudio: add device detection module
This adds a new module for CoreAudio device detection. It registers a
callback to detect hotplugged devices and creates/destroys modules named
'module-coreaudio-device'. Devices are identified via a system-wide
unique AudioDeviceID.
Daniel Mack [Sun, 6 Dec 2009 23:40:03 +0000 (00:40 +0100)]
hack around another OS X bug: recv() with MSG_PEEK does not work
At least for pipes, recv() with MSG_PEEK does actually eat up data from
file descriptors. Hence, this can't be used for PULLHUP emulation.
Use another ioctl hack for that.
Daniel Mack [Sun, 22 Nov 2009 23:12:18 +0000 (00:12 +0100)]
poll() is totally broken on Mac OS X
Even on 10.5.8, poll() does not do the right thing. Haven't checked on
newer versions. Hence, wrap all occurences of poll() to pa_poll and
emulate that call with select() on OSX. This is totally embarassing.
Kim Lester [Wed, 16 Sep 2009 01:24:27 +0000 (09:24 +0800)]
src/Makefile.am: add specific OS_IS_DARWIN files
Signed-off-by: Kim Lester <kim@dfusion.com.au>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Daniel Mack [Sun, 1 Nov 2009 19:06:08 +0000 (20:06 +0100)]
core-rtclock.c: tweak OS_IS_DARWIN constraints
Move the code for OS_IS_DARWIN to the top as on Darwin,
HAVE_CLOCK_GETTIME is also defined.
Kim Lester [Wed, 16 Sep 2009 01:07:50 +0000 (09:07 +0800)]
configure.ac: add DARWIN_OS variable
Signed-off-by: Kim Lester <kim@dfusion.com.au>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Daniel Mack [Sun, 6 Dec 2009 14:53:36 +0000 (15:53 +0100)]
Merge branch 'master' of git://0pointer.de/pulseaudio