review.tizen.org Git - platform/kernel/linux-rpi.git/log

Merge tag 'net-5.15-rc3' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Current release - regressions:

   - dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports()

  Previous releases - regressions:

   - introduce a shutdown method to mdio device drivers, and make DSA
     switch drivers compatible with masters disappearing on shutdown;
     preventing infinite reference wait

   - fix issues in mdiobus users related to ->shutdown vs ->remove

   - virtio-net: fix pages leaking when building skb in big mode

   - xen-netback: correct success/error reporting for the
     SKB-with-fraglist

   - dsa: tear down devlink port regions when tearing down the devlink
     port on error

   - nexthop: fix division by zero while replacing a resilient group

   - hns3: check queue, vf, vlan ids range before using

  Previous releases - always broken:

   - napi: fix race against netpoll causing NAPI getting stuck

   - mlx4_en: ensure link operstate is updated even if link comes up
     before netdev registration

   - bnxt_en: fix TX timeout when TX ring size is set to the smallest

   - enetc: fix illegal access when reading affinity_hint; prevent oops
     on sysfs access

   - mtk_eth_soc: avoid creating duplicate offload entries

  Misc:

   - core: correct the sock::sk_lock.owned lockdep annotations"

* tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
  atlantic: Fix issue in the pm resume flow.
  net/mlx4_en: Don't allow aRFS for encapsulated packets
  net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled
  net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries
  nfc: st-nci: Add SPI ID matching DT compatible
  MAINTAINERS: remove Guvenc Gulce as net/smc maintainer
  nexthop: Fix memory leaks in nexthop notification chain listeners
  mptcp: ensure tx skbs always have the MPTCP ext
  qed: rdma - don't wait for resources under hw error recovery flow
  s390/qeth: fix deadlock during failing recovery
  s390/qeth: Fix deadlock in remove_discipline
  s390/qeth: fix NULL deref in qeth_clear_working_pool_list()
  net: dsa: realtek: register the MDIO bus under devres
  net: dsa: don't allocate the slave_mii_bus using devres
  Doc: networking: Fox a typo in ice.rst
  net: dsa: fix dsa_tree_setup error path
  net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work
  net/smc: add missing error check in smc_clc_prfx_set()
  net: hns3: fix a return value error in hclge_get_reset_status()
  net: hns3: check vlan id before using it
  ...

memcg: flush lruvec stats in the refault

Prior to the commit 7e1c0d6f5820 ("memcg: switch lruvec stats to rstat")
and the commit aa48e47e3906 ("memcg: infrastructure to flush memcg
stats"), each lruvec memcg stats can be off by (nr_cgroups * nr_cpus *
32) at worst and for unbounded amount of time.  The commit aa48e47e3906
moved the lruvec stats to rstat infrastructure and the commit
7e1c0d6f5820 bounded the error for all the lruvec stats to (nr_cpus *
32) at worst for at most 2 seconds.  More specifically it decoupled the
number of stats and the number of cgroups from the error rate.

However this reduction in error comes with the cost of triggering the
slowpath of stats update more frequently.  Previously in the slowpath
the kernel adds the stats up the memcg tree.  After aa48e47e3906, the
kernel triggers the asyn lruvec stats flush through queue_work().  This
causes regression reports from 0day kernel bot [1] as well as from
phoronix test suite [2].

We tried two options to fix the regression:

1) Increase the threshold to trigger the slowpath in lruvec stats
    update codepath from 32 to 512.

2) Remove the slowpath from lruvec stats update codepath and instead
    flush the stats in the page refault codepath. The assumption is that
    the kernel timely flush the stats, so, the update tree would be
    small in the refault codepath to not cause the preformance impact.

Following are the results of will-it-scale/page_fault[1|2|3] benchmark
on four settings i.e.  (1) 5.15-rc1 as baseline (2) 5.15-rc1 with
aa48e47e3906 and 7e1c0d6f5820 reverted (3) 5.15-rc1 with option-1
(4) 5.15-rc1 with option-2.

  test       (1)      (2)               (3)               (4)
  pg_f1   368563   406277 (10.23%)   399693  (8.44%)   416398 (12.97%)
  pg_f2   338399   372133  (9.96%)   369180  (9.09%)   381024 (12.59%)
  pg_f3   500853   575399 (14.88%)   570388 (13.88%)   576083 (15.02%)

From the above result, it seems like the option-2 not only solves the
regression but also improves the performance for at least these
benchmarks.

Feng Tang (intel) ran the aim7 benchmark with these two options and
confirms that option-1 reduces the regression but option-2 removes the
regression.

Michael Larabel (phoronix) ran multiple benchmarks with these options
and reported the results at [3] and it shows for most benchmarks
option-2 removes the regression introduced by the commit aa48e47e3906
("memcg: infrastructure to flush memcg stats").

Based on the experiment results, this patch proposed the option-2 as the
solution to resolve the regression.

Link: https://lore.kernel.org/all/20210726022421.GB21872@xsang-OptiPlex-9020
Link: https://www.phoronix.com/scan.php?page=article&item=linux515-compile-regress
Link: https://openbenchmarking.org/result/2109226-DEBU-LINUX5104
Fixes: aa48e47e3906 ("memcg: infrastructure to flush memcg stats")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Tested-by: Michael Larabel <Michael@phoronix.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hillf Danton <hdanton@sina.com>,
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atlantic: Fix issue in the pm resume flow.

After fixing hibernation resume flow, another usecase was found which
should be explicitly handled - resume when device is in "down" state.
Invoke aq_nic_init jointly with aq_nic_start only if ndev was already
up during suspend/hibernate. We still need to perform nic_deinit() if
caller requests for it, to handle the freeze/resume scenarios.

Fixes: 57f780f1c433 ("atlantic: Fix driver resume flow.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx4_en: Don't allow aRFS for encapsulated packets

Driver doesn't support aRFS for encapsulated packets, return early error
in such a case.

Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled

The blamed commit made the fatally incorrect assumption that ports which
aren't in the FORWARDING STP state should not have packets forwarded
towards them, and that is all that needs to be done.

However, that logic alone permits BLOCKING ports to forward to
FORWARDING ports, which of course allows packet storms to occur when
there is an L2 loop.

The ocelot_get_bridge_fwd_mask should not only ask "what can the bridge
do for you", but "what can you do for the bridge". This way, only
FORWARDING ports forward to the other FORWARDING ports from the same
bridging domain, and we are still compatible with the idea of multiple
bridges.

Fixes: df291e54ccca ("net: ocelot: support multiple bridges")
Suggested-by: Colin Foster <colin.foster@in-advantage.com>
Reported-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries

Sometimes multiple CLS_REPLACE calls are issued for the same connection.
rhashtable_insert_fast does not check for these duplicates, so multiple
hardware flow entries can be created.
Fix this by checking for an existing entry early

Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: st-nci: Add SPI ID matching DT compatible

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding the part name used in
the compatible to the list of SPI IDs.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: remove Guvenc Gulce as net/smc maintainer

Remove myself as net/smc maintainer, as I am
leaving IBM soon and can not maintain net/smc anymore.

Cc: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nexthop: Fix memory leaks in nexthop notification chain listeners

syzkaller discovered memory leaks [1] that can be reduced to the
following commands:

# ip nexthop add id 1 blackhole
# devlink dev reload pci/0000:06:00.0

As part of the reload flow, mlxsw will unregister its netdevs and then
unregister from the nexthop notification chain. Before unregistering
from the notification chain, mlxsw will receive delete notifications for
nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw
will not receive notifications for nexthops using netdevs that are not
dismantled as part of the reload flow. For example, the blackhole
nexthop above that internally uses the loopback netdev as its nexthop
device.

One way to fix this problem is to have listeners flush their nexthop
tables after unregistering from the notification chain. This is
error-prone as evident by this patch and also not symmetric with the
registration path where a listener receives a dump of all the existing
nexthops.

Therefore, fix this problem by replaying delete notifications for the
listener being unregistered. This is symmetric to the registration path
and also consistent with the netdev notification chain.

The above means that unregister_nexthop_notifier(), like
register_nexthop_notifier(), will have to take RTNL in order to iterate
over the existing nexthops and that any callers of the function cannot
hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN
driver. To avoid a deadlock, change the latter to unregister its nexthop
listener without holding RTNL, making it symmetric to the registration
path.

[1]
unreferenced object 0xffff88806173d600 (size 512):
  comm "syz-executor.0", pid 1290, jiffies 4295583142 (age 143.507s)
  hex dump (first 32 bytes):
    41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff  A..`......sa....
    08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00  ..sa............
  backtrace:
    [<ffffffff81a6b576>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<ffffffff81a6b576>] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522
    [<ffffffff81a716d3>] slab_alloc_node mm/slub.c:3206 [inline]
    [<ffffffff81a716d3>] slab_alloc mm/slub.c:3214 [inline]
    [<ffffffff81a716d3>] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231
    [<ffffffff82e8681a>] kmalloc include/linux/slab.h:591 [inline]
    [<ffffffff82e8681a>] kzalloc include/linux/slab.h:721 [inline]
    [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline]
    [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline]
    [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239
    [<ffffffff813ef67d>] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83
    [<ffffffff813f0662>] blocking_notifier_call_chain kernel/notifier.c:318 [inline]
    [<ffffffff813f0662>] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306
    [<ffffffff8384b9c6>] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244
    [<ffffffff83852bd8>] insert_nexthop net/ipv4/nexthop.c:2336 [inline]
    [<ffffffff83852bd8>] nexthop_add net/ipv4/nexthop.c:2644 [inline]
    [<ffffffff83852bd8>] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913
    [<ffffffff833e9a78>] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572
    [<ffffffff83608703>] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504
    [<ffffffff833de032>] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590
    [<ffffffff836069de>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
    [<ffffffff836069de>] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340
    [<ffffffff83607501>] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929
    [<ffffffff832fde84>] sock_sendmsg_nosec net/socket.c:704 [inline]
    [<ffffffff832fde84>] sock_sendmsg net/socket.c:724 [inline]
    [<ffffffff832fde84>] ____sys_sendmsg+0x874/0x9f0 net/socket.c:2409
    [<ffffffff83304a44>] ___sys_sendmsg+0x104/0x170 net/socket.c:2463
    [<ffffffff83304c01>] __sys_sendmsg+0x111/0x1f0 net/socket.c:2492
    [<ffffffff83304d5d>] __do_sys_sendmsg net/socket.c:2501 [inline]
    [<ffffffff83304d5d>] __se_sys_sendmsg net/socket.c:2499 [inline]
    [<ffffffff83304d5d>] __x64_sys_sendmsg+0x7d/0xc0 net/socket.c:2499

Fixes: 2a014b200bbd ("mlxsw: spectrum_router: Add support for nexthop objects")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

init: Revert accidental changes to print irqs_disabled()

Commit f8ade8dddb16 ("xsurf100: drop include of lib8390.c") accidentally
changed init/main.c. Revert that part.

Fixes: f8ade8dddb16 ("xsurf100: drop include of lib8390.c")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: Update Xen-[PCI,SWIOTLB,Block] maintainership

Konrad's new job role is putting a serious cramp on him
being a responsive maintainer and as such he is handing off
the reins to Juergen, Roger, and Stefano.

Thank you!

Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: Update SWIOTLB maintainership

Konrad's new job role is putting a serious cramp on him
being a responsive maintainer and as such he is handing off
the reins to Christoph Hellwig.

Thank you!

Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update entry for NIOS2

Ley Foon has left Intel and will no longer be able to maintain NIOS2.
Update the MAINTAINER's entry to Dinh Nguyen.

Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'spi-fix-v5.15-rc1' of git://git./linux/kernel/git/broonie/spi

Pull spi modalias fix from Mark Brown:
"Fix modalias issues

  As reported by Russell King the change to use OF style modaliases for
  DT enumerated broke at least the spi-nor driver, the patch here
  reverts that change to fix the regression.

  Sadly this will mean that anything that started loading since the
  change to OF modaliases will run into issues, there doesn't seem to be
  any approach which doesn't cause some problems and thi seems like the
  least bad approach - gory details are in the commit log for the
  change.

  I'm currently working through the SPI drivers to add ID tables and
  missing IDs to tables which should address things from the other end,
  this seems more straightforward and robust than any other options"

* tag 'spi-fix-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Revert modalias changes

Merge tag 'nfsd-5.15-2' of git://git./linux/kernel/git/cel/linux

Pull nfsd fixes from Chuck Lever:
"Critical bug fixes:

   - Fix crash in NLM TEST procedure

   - NFSv4.1+ backchannel not restored after PATH_DOWN"

* tag 'nfsd-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: back channel stuck in SEQ4_STATUS_CB_PATH_DOWN
  NLM: Fix svcxdr_encode_owner()

Merge tag 'platform-drivers-x86-v5.15-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
"The first round of bug-fixes for platform-drivers-x86 for 5.15,
  highlights:

   - amd-pmc fix for some suspend/resume issues

   - intel-hid fix to avoid false-positive SW_TABLET_MODE=1 reporting

   - some build error/warning fixes

   - various DMI quirk additions"

* tag 'platform-drivers-x86-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: gigabyte-wmi: add support for B550I Aorus Pro AX
  platform/x86/intel: hid: Add DMI switches allow list
  platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build error
  platform/x86: amd-pmc: Increase the response register timeout
  platform/x86: touchscreen_dmi: Update info for the Chuwi Hi10 Plus (CWI527) tablet
  platform/x86: touchscreen_dmi: Add info for the Chuwi HiBook (CWI514) tablet
  lg-laptop: Correctly handle dmi_get_system_info() returning NULL
  platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()

MAINTAINERS: ARM/VT8500, remove defunct e-mail

linux@prisktech.co.nz is defunct:

4.1.2 <linux@prisktech.co.nz>: Recipient address rejected: Domain not found

Remove it from MAINTAINERS and mark the ARM/VT8500 entry orphan.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mptcp: ensure tx skbs always have the MPTCP ext

Due to signed/unsigned comparison, the expression:

info->size_goal - skb->len > 0

evaluates to true when the size goal is smaller than the
skb size. That results in lack of tx cache refill, so that
the skb allocated by the core TCP code lacks the required
MPTCP skb extensions.

Due to the above, syzbot is able to trigger the following WARN_ON():

WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366
Modules linked in:
CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366
Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9
RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216
RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000
RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003
RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280
R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0
FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547
mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003
release_sock+0xb4/0x1b0 net/core/sock.c:3206
sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145
mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749
inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
sock_write_iter+0x2a0/0x3e0 net/socket.c:1057
call_write_iter include/linux/fs.h:2163 [inline]
new_sync_write+0x40b/0x640 fs/read_write.c:507
vfs_write+0x7cf/0xae0 fs/read_write.c:594
ksys_write+0x1ee/0x250 fs/read_write.c:647
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9
RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038
R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000

Fix the issue rewriting the relevant expression to avoid
sign-related problems - note: size_goal is always >= 0.

Additionally, ensure that the skb in the tx cache always carries
the relevant extension.

Reported-and-tested-by: syzbot+263a248eec3e875baa7b@syzkaller.appspotmail.com
Fixes: 1094c6fe7280 ("mptcp: fix possible divide by zero")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: rdma - don't wait for resources under hw error recovery flow

If the HW device is during recovery, the HW resources will never return,
hence we shouldn't wait for the CID (HW context ID) bitmaps to clear.
This fix speeds up the error recovery flow.

Fixes: 64515dc899df ("qed: Add infrastructure for error detection and recovery")
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 's390-qeth-fixes-2021-09-21'

Julian Wiedmann says:

====================
s390/qeth: fixes 2021-09-21

This brings two fixes for deadlocks when a device is removed while it
has certain types of async work pending. And one additional fix for a
missing NULL check in an error case.
====================

Link: https://lore.kernel.org/r/20210921145217.1584654-1-jwi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: fix deadlock during failing recovery

Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed
taking discipline_mutex inside qeth_do_reset(), fixing potential
deadlocks. An error path was missed though, that still takes
discipline_mutex and thus has the original deadlock potential.

Intermittent deadlocks were seen when a qeth channel path is configured
offline, causing a race between qeth_do_reset and ccwgroup_remove.
Call qeth_set_offline() directly in the qeth_do_reset() error case and
then a new variant of ccwgroup_set_offline(), without taking
discipline_mutex.

Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: Fix deadlock in remove_discipline

Problem: qeth_close_dev_handler is a worker that tries to acquire
card->discipline_mutex via drv->set_offline() in ccwgroup_set_offline().
Since commit b41b554c1ee7
("s390/qeth: fix locking for discipline setup / removal")
qeth_remove_discipline() is called under card->discipline_mutex and
cancels the work and waits for it to finish.

STOPLAN reception with reason code IPA_RC_VEPA_TO_VEB_TRANSITION is the
only situation that schedules close_dev_work. In that situation scheduling
qeth recovery will also result in an offline interface, when resetting the
isolation mode fails, if the external switch is still set to VEB.
And since commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery")
qeth recovery does not aquire card->discipline_mutex anymore.

So we accept the longer pathlength of qeth_schedule_recovery in this
error situation and re-use the existing function.

As a side-benefit this changes the hwtrap to behave like during recovery
instead of like during a user-triggered set_offline.

Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: fix NULL deref in qeth_clear_working_pool_list()

When qeth_set_online() calls qeth_clear_working_pool_list() to roll
back after an error exit from qeth_hardsetup_card(), we are at risk of
accessing card->qdio.in_q before it was allocated by
qeth_alloc_qdio_queues() via qeth_mpc_initialize().

qeth_clear_working_pool_list() then dereferences NULL, and by writing to
queue->bufs[i].pool_entry scribbles all over the CPU's lowcore.
Resulting in a crash when those lowcore areas are used next (eg. on
the next machine-check interrupt).

Such a scenario would typically happen when the device is first set
online and its queues aren't allocated yet. An early IO error or certain
misconfigs (eg. mismatched transport mode, bad portno) then cause us to
error out from qeth_hardsetup_card() with card->qdio.in_q still being
NULL.

Fix it by checking the pointer for NULL before accessing it.

Note that we also have (rare) paths inside qeth_mpc_initialize() where
a configuration change can cause us to free the existing queues,
expecting that subsequent code will allocate them again. If we then
error out before that re-allocation happens, the same bug occurs.

Fixes: eff73e16ee11 ("s390/qeth: tolerate pre-filled RX buffer")
Reported-by: Stefan Raspl <raspl@linux.ibm.com>
Root-caused-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

spi: Revert modalias changes

During the v5.13 cycle we updated the SPI subsystem to generate OF style
modaliases for SPI devices, replacing the old Linux style modalises we
used to generate based on spi_device_id which are the DT style name with
the vendor removed.  Unfortunately this means that we start only
reporting OF style modalises and not the old ones and there is nothing
that ensures that drivers list every possible OF compatible string in
their OF ID table.  The result is that there are systems which have been
relying on loading modules based on the old style that are now broken,
as found by Russell King with spi-nor on Macchiatobin.

spi-nor is a particularly problematic case for this, it only lists a
single generic DT compatible jedec,spi-nor in the driver but supports a
huge raft of device specific compatibles, with a large set of part
numbers many of which are offered by multiple vendors.  Russell's
searches of upstream device trees has turned up examples with vendor
names written in non-standard ways too.  To make matters worse up until
8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec"
binding") the generic compatible was not part of the binding so there
are device trees out there written to that binding version which don't
list it all.  The sheer number of parts supported together with our
previous approach of ignoring the vendor ID makes robustly fixing this
by adding compatibles to the spi-nor driver seem problematic, the
current DT binding document does not list all the parts supported by the
driver at the minute (further patches will fix this).

I've also investigated supporting both formats of modalias
simultaneously but that doesn't seem possible, especially without
breaking our userspace ABI which is obviously not viable.

Instead revert the relevant changes for now:

e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support")
3ce6c9e2617e ("spi: add of_device_uevent_modalias support")

This will unfortunately mean that any system which had started having
modules autoload based on the OF compatibles for drivers that list
things there but not in the spi_device_ids will now not have those
modules load which is itself a regression.  Since it affects a narrower
time window and the particularly problematic spi-nor driver may be
critical to system boot on smaller systems this seems the best of a
series of bad options.  I will start an audit of SPI drivers to identify
and fix cases where things won't autoload using spi_device_id, this is
not great but seems to be the best way forward that anyone has been able
to identify.

Thanks to Russell for both his report and the additional diagnostic and
analysis work he has done here, the detailed research above was his
work.

Fixes: e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support")
Fixes: 3ce6c9e2617e ("spi: add of_device_uevent_modalias support")
Reported-by: Russell King (Oracle) <linux@armlinux.org.uk>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Andreas Schwab <schwab@suse.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>

Merge tag 's390-5.15-ebpf-jit-fixes' of git://git./linux/kernel/git/s390/linux

Pull s390 eBPF fixes from Vasily Gorbik:
"Johan Almbladh has implemented a number of new testcases for eBPF [1],
  which uncovered three miscompilation issues in the s390 eBPF JIT"

Link: https://lore.kernel.org/bpf/20210902185229.1840281-1-johan.almbladh@anyfinetworks.com/
* tag 's390-5.15-ebpf-jit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/bpf: Fix optimizing out zero-extensions
  s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant
  s390/bpf: Fix branch shortening during codegen pass

qnx4: work around gcc false positive warning bug

In commit b7213ffa0e58 ("qnx4: avoid stringop-overread errors") I tried
to teach gcc about how the directory entry structure can be two
different things depending on a status flag.  It made the code clearer,
and it seemed to make gcc happy.

However, Arnd points to a gcc bug, where despite using two different
members of a union, gcc then gets confused, and uses the size of one of
the members to decide if a string overrun happens.  And not necessarily
the rigth one.

End result: with some configurations, gcc-11 will still complain about
the source buffer size being overread:

  fs/qnx4/dir.c: In function 'qnx4_readdir':
  fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread]
     76 |                         size = strnlen(name, size);
        |                                ^~~~~~~~~~~~~~~~~~~
  fs/qnx4/dir.c:26:22: note: source object declared here
     26 |                 char de_name;
        |                      ^~~~~~~

because gcc will get confused about which union member entry is actually
getting accessed, even when the source code is very clear about it.  Gcc
internally will have combined two "redundant" pointers (pointing to
different union elements that are at the same offset), and takes the
size checking from one or the other - not necessarily the right one.

This is clearly a gcc bug, but we can work around it fairly easily.  The
biggest thing here is the big honking comment about why we do what we
do.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6
Reported-and-tested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

platform/x86: gigabyte-wmi: add support for B550I Aorus Pro AX

Tested with a AMD Ryzen 7 5800X.

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Thomas Weißschuh <thomas@weissschuh.net>
Link: https://lore.kernel.org/r/20210921100702.3838-1-tjakobi@math.uni-bielefeld.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86/intel: hid: Add DMI switches allow list

Some devices, even non convertible ones, can send incorrect
SW_TABLET_MODE reports.

Add an allow list and accept such reports only from devices in it.

Bug reported for Dell XPS 17 9710 on:
https://gitlab.freedesktop.org/libinput/libinput/-/issues/662

Reported-by: Tobias Gurtzick <magic@wizardtales.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Tobias Gurtzick <magic@wizardtales.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20210920160312.9787-1-jose.exposito89@gmail.com
[hdegoede@redhat.com: Check dmi_switches_auto_add_allow_list only once]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build error

When DELL_WMI=y, DELL_WMI_PRIVACY=y, and LEDS_TRIGGER_AUDIO=m, there
is a linker error since the LEDS trigger code is built as a loadable
module. This happens because DELL_WMI_PRIVACY is a bool that depends
on a tristate (LEDS_TRIGGER_AUDIO=m), which can be dangerous.

ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe':
dell-wmi-privacy.c:(.text+0x3df): undefined reference to `ledtrig_audio_get'

Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Perry Yuan <Perry.Yuan@dell.com>
Cc: Dell.Client.Kernel@dell.com
Cc: platform-driver-x86@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/20210918044829.19222-1-rdunlap@infradead.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Merge branch 'dsa-devres'

Vladimir Oltean says:

====================
Fix mdiobus users with devres

Commit ac3a68d56651 ("net: phy: don't abuse devres in
devm_mdiobus_register()") by Bartosz Golaszewski has introduced two
classes of potential bugs by making the devres callback of
devm_mdiobus_alloc stop calling mdiobus_unregister.

The exact buggy circumstances are presented in the individual commit
messages. I have searched the tree for other occurrences, but at the
moment:

- for issue (a) I have no concrete proof that other buses except SPI and
  I2C suffer from it, and the only SPI or I2C device drivers that call
  of_mdiobus_alloc are the DSA drivers that leave a NULL
  ds->slave_mii_bus and a non-NULL ds->ops->phy_read, aka ksz9477,
  ksz8795, lan9303_i2c, vsc73xx-spi.

- for issue (b), all drivers which call of_mdiobus_alloc either use
  of_mdiobus_register too, or call mdiobus_unregister sometime within
  the ->remove path.

Although at this point I've seen enough strangeness caused by this
"device_del during ->shutdown" that I'm just going to copy the SPI and
I2C subsystem maintainers to this patch series, to get their feedback
whether they've had reports about things like this before. I don't think
other buses behave in this way, it forces SPI and I2C devices to have to
protect themselves from a really strange set of issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: realtek: register the MDIO bus under devres

The Linux device model permits both the ->shutdown and ->remove driver
methods to get called during a shutdown procedure. Example: a DSA switch
which sits on an SPI bus, and the SPI bus driver calls this on its
->shutdown method:

spi_unregister_controller
-> device_for_each_child(&ctlr->dev, NULL, __unregister);
   -> spi_unregister_device(to_spi_device(dev));
      -> device_del(&spi->dev);

So this is a simple pattern which can theoretically appear on any bus,
although the only other buses on which I've been able to find it are
I2C:

i2c_del_adapter
-> device_for_each_child(&adap->dev, NULL, __unregister_client);
   -> i2c_unregister_device(client);
      -> device_unregister(&client->dev);

The implication of this pattern is that devices on these buses can be
unregistered after having been shut down. The drivers for these devices
might choose to return early either from ->remove or ->shutdown if the
other callback has already run once, and they might choose that the
->shutdown method should only perform a subset of the teardown done by
->remove (to avoid unnecessary delays when rebooting).

So in other words, the device driver may choose on ->remove to not
do anything (therefore to not unregister an MDIO bus it has registered
on ->probe), because this ->remove is actually triggered by the
device_shutdown path, and its ->shutdown method has already run and done
the minimally required cleanup.

This used to be fine until the blamed commit, but now, the following
BUG_ON triggers:

void mdiobus_free(struct mii_bus *bus)
{
/* For compatibility with error handling in drivers. */
if (bus->state == MDIOBUS_ALLOCATED) {
kfree(bus);
return;
}

BUG_ON(bus->state != MDIOBUS_UNREGISTERED);
bus->state = MDIOBUS_RELEASED;

put_device(&bus->dev);
}

In other words, there is an attempt to free an MDIO bus which was not
unregistered. The attempt to free it comes from the devres release
callbacks of the SPI device, which are executed after the device is
unregistered.

I'm not saying that the fact that MDIO buses allocated using devres
would automatically get unregistered wasn't strange. I'm just saying
that the commit didn't care about auditing existing call paths in the
kernel, and now, the following code sequences are potentially buggy:

(a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device
    located on a bus that unregisters its children on shutdown. After
    the blamed patch, either both the alloc and the register should use
    devres, or none should.

(b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no
    mdiobus_unregister at all in the remove path. After the blamed
    patch, nobody unregisters the MDIO bus anymore, so this is even more
    buggy than the previous case which needs a specific bus
    configuration to be seen, this one is an unconditional bug.

In this case, the Realtek drivers fall under category (b). To solve it,
we can register the MDIO bus under devres too, which restores the
previous behavior.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: don't allocate the slave_mii_bus using devres

The Linux device model permits both the ->shutdown and ->remove driver
methods to get called during a shutdown procedure. Example: a DSA switch
which sits on an SPI bus, and the SPI bus driver calls this on its
->shutdown method:

spi_unregister_controller
-> device_for_each_child(&ctlr->dev, NULL, __unregister);
   -> spi_unregister_device(to_spi_device(dev));
      -> device_del(&spi->dev);

So this is a simple pattern which can theoretically appear on any bus,
although the only other buses on which I've been able to find it are
I2C:

i2c_del_adapter
-> device_for_each_child(&adap->dev, NULL, __unregister_client);
   -> i2c_unregister_device(client);
      -> device_unregister(&client->dev);

The implication of this pattern is that devices on these buses can be
unregistered after having been shut down. The drivers for these devices
might choose to return early either from ->remove or ->shutdown if the
other callback has already run once, and they might choose that the
->shutdown method should only perform a subset of the teardown done by
->remove (to avoid unnecessary delays when rebooting).

So in other words, the device driver may choose on ->remove to not
do anything (therefore to not unregister an MDIO bus it has registered
on ->probe), because this ->remove is actually triggered by the
device_shutdown path, and its ->shutdown method has already run and done
the minimally required cleanup.

This used to be fine until the blamed commit, but now, the following
BUG_ON triggers:

void mdiobus_free(struct mii_bus *bus)
{
/* For compatibility with error handling in drivers. */
if (bus->state == MDIOBUS_ALLOCATED) {
kfree(bus);
return;
}

BUG_ON(bus->state != MDIOBUS_UNREGISTERED);
bus->state = MDIOBUS_RELEASED;

put_device(&bus->dev);
}

In other words, there is an attempt to free an MDIO bus which was not
unregistered. The attempt to free it comes from the devres release
callbacks of the SPI device, which are executed after the device is
unregistered.

I'm not saying that the fact that MDIO buses allocated using devres
would automatically get unregistered wasn't strange. I'm just saying
that the commit didn't care about auditing existing call paths in the
kernel, and now, the following code sequences are potentially buggy:

(a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device
    located on a bus that unregisters its children on shutdown. After
    the blamed patch, either both the alloc and the register should use
    devres, or none should.

(b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no
    mdiobus_unregister at all in the remove path. After the blamed
    patch, nobody unregisters the MDIO bus anymore, so this is even more
    buggy than the previous case which needs a specific bus
    configuration to be seen, this one is an unconditional bug.

In this case, DSA falls into category (a), it tries to be helpful and
registers an MDIO bus on behalf of the switch, which might be on such a
bus. I've no idea why it does it under devres.

It does this on probe:

if (!ds->slave_mii_bus && ds->ops->phy_read)
alloc and register mdio bus

and this on remove:

if (ds->slave_mii_bus && ds->ops->phy_read)
unregister mdio bus

I _could_ imagine using devres because the condition used on remove is
different than the condition used on probe. So strictly speaking, DSA
cannot determine whether the ds->slave_mii_bus it sees on remove is the
ds->slave_mii_bus that _it_ has allocated on probe. Using devres would
have solved that problem. But nonetheless, the existing code already
proceeds to unregister the MDIO bus, even though it might be
unregistering an MDIO bus it has never registered. So I can only guess
that no driver that implements ds->ops->phy_read also allocates and
registers ds->slave_mii_bus itself.

So in that case, if unregistering is fine, freeing must be fine too.

Stop using devres and free the MDIO bus manually. This will make devres
stop attempting to free a still registered MDIO bus on ->shutdown.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Doc: networking: Fox a typo in ice.rst

This patch fixes a spelling typo in ice.rst

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: fix dsa_tree_setup error path

Since the blamed commit, dsa_tree_teardown_switches() was split into two
smaller functions, dsa_tree_teardown_switches and dsa_tree_teardown_ports.

However, the error path of dsa_tree_setup stopped calling dsa_tree_teardown_ports.

Fixes: a57d8c217aad ("net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'smc-fixes'

Karsten Graul says:

====================
net/smc: fixes 2021-09-20

Please apply the following patches for smc to netdev's net tree.

The first patch adds a missing error check, and the second patch
fixes a possible leak of a lock in a worker.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work

The abort_work is scheduled when a connection was detected to be
out-of-sync after a link failure. The work calls smc_conn_kill(),
which calls smc_close_active_abort() and that might end up calling
smc_close_cancel_work().
smc_close_cancel_work() cancels any pending close_work and tx_work but
needs to release the sock_lock before and acquires the sock_lock again
afterwards. So when the sock_lock was NOT acquired before then it may
be held after the abort_work completes. Thats why the sock_lock is
acquired before the call to smc_conn_kill() in __smc_lgr_terminate(),
but this is missing in smc_conn_abort_work().

Fix that by acquiring the sock_lock first and release it after the
call to smc_conn_kill().

Fixes: b286a0651e44 ("net/smc: handle incoming CDC validation message")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: add missing error check in smc_clc_prfx_set()

Coverity stumbled over a missing error check in smc_clc_prfx_set():

*** CID 1475954:  Error handling issues  (CHECKED_RETURN)
/net/smc/smc_clc.c: 233 in smc_clc_prfx_set()
>>>     CID 1475954:  Error handling issues  (CHECKED_RETURN)
>>>     Calling "kernel_getsockname" without checking return value (as is done elsewhere 8 out of 10 times).
233      kernel_getsockname(clcsock, (struct sockaddr *)&addrs);

Add the return code check in smc_clc_prfx_set().

Fixes: c246d942eabc ("net/smc: restructure netinfo for CLC proposal msgs")
Reported-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'afs-fixes-20210913' of git://git./linux/kernel/git/dhowells/linux-fs

Pull AFS fixes from David Howells:
"Fixes for AFS problems that can cause data corruption due to
  interaction with another client modifying data cached locally:

   - When d_revalidating a dentry, don't look at the inode to which it
     points. Only check the directory to which the dentry belongs. This
     was confusing things and causing the silly-rename cleanup code to
     remove the file now at the dentry of a file that got deleted.

   - Fix mmap data coherency. When a callback break is received that
     relates to a file that we have cached, the data content may have
     been changed (there are other reasons, such as the user's rights
     having been changed). However, we're checking it lazily, only on
     entry to the kernel, which doesn't happen if we have a writeable
     shared mapped page on that file.

     We make the kernel keep track of mmapped files and clear all PTEs
     mapping to that file as soon as the callback comes in by calling
     unmap_mapping_pages() (we don't necessarily want to zap the
     pagecache). This causes the kernel to be reentered when userspace
     tries to access the mmapped address range again - and at that point
     we can query the server and, if we need to, zap the page cache.

     Ideally, I would check each file at the point of notification, but
     that involves poking the server[*] - which is holding an exclusive
     lock on the vnode it is changing, waiting for all the clients it
     notified to reply. This could then deadlock against the server.
     Further, invalidating the pagecache might call ->launder_page(),
     which would try to write to the file, which would definitely
     deadlock. (AFS doesn't lease file access).

     [*] Checking to see if the file content has changed is a matter of
         comparing the current data version number, but we have to ask
         the server for that. We also need to get a new callback promise
         and we need to poke the server for that too.

   - Add some more points at which the inode is validated, since we're
     doing it lazily, notably in ->read_iter() and ->page_mkwrite(), but
     also when performing some directory operations.

     Ideally, checking in ->read_iter() would be done in some derivation
     of filemap_read(). If we're going to call the server to read the
     file, then we get the file status fetch as part of that.

   - The above is now causing us to make a lot more calls to
     afs_validate() to check the inode - and afs_validate() takes the
     RCU read lock each time to make a quick check (ie.
     afs_check_validity()). This is entirely for the purpose of checking
     cb_s_break to see if the server we're using reinitialised its list
     of callbacks - however this isn't a very common event, so most of
     the time we're taking this needlessly.

     Add a new cell-wide counter to count the number of
     reinitialisations done by any server and check that - and only if
     that changes, take the RCU read lock and check the server list (the
     server list may change, but the cell a file is part of won't).

   - Don't update vnode->cb_s_break and ->cb_v_break inside the validity
     checking loop. The cb_lock is done with read_seqretry, so we might
     go round the loop a second time after resetting those values - and
     that could cause someone else checking validity to miss something
     (I think).

  Also included are patches for fixes for some bugs encountered whilst
  debugging this:

   - Fix a leak of afs_read objects and fix a leak of keys hidden by
     that.

   - Fix a leak of pages that couldn't be added to extend a writeback.

   - Fix the maintenance of i_blocks when i_size is changed by a local
     write or a local dir edit"

Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217
Link: https://lore.kernel.org/r/163111665183.283156.17200205573146438918.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/163113612442.352844.11162345591911691150.stgit@warthog.procyon.org.uk/
* tag 'afs-fixes-20210913' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix updating of i_blocks on file/dir extension
  afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server
  afs: Try to avoid taking RCU read lock when checking vnode validity
  afs: Fix mmap coherency vs 3rd-party changes
  afs: Fix incorrect triggering of sillyrename on 3rd-party invalidation
  afs: Add missing vnode validation checks
  afs: Fix page leak
  afs: Fix missing put on afs_read objects and missing get on the key therein

Merge tag '5.15-rc1-ksmbd' of git://git.samba.org/ksmbd

Pull ksmbd server fixes from Steve French:
"Three ksmbd fixes, including an important security fix for path
  processing, and a buffer overflow check, and a trivial fix for
  incorrect header inclusion"

* tag '5.15-rc1-ksmbd' of git://git.samba.org/ksmbd:
  ksmbd: add validation for FILE_FULL_EA_INFORMATION of smb2_get_info
  ksmbd: prevent out of share access
  ksmbd: transport_rdma: Don't include rwlock.h directly

Merge tag '5.15-rc1-smb3' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs client fixes from Steve French:

- two deferred close fixes (for bugs found with xfstests 478 and 461)

- a deferred close improvement in rename

- two trivial fixes for incorrect Linux comment formatting of multiple
   cifs files (pointed out by automated kernel test robot and
   checkpatch)

* tag '5.15-rc1-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Not to defer close on file when lock is set
  cifs: Fix soft lockup during fsstress
  cifs: Deferred close performance improvements
  cifs: fix incorrect kernel doc comments
  cifs: remove pathname for file from SPDX header

Merge tag 'spi-fix-v5.15-rc2' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark BrownL
"This contains a couple of fixes, one fix for handling of zero length
  transfers on Rockchip devices and a warning fix which will conflict
  with a version you did but cleans up some extra unneeded forward
  declarations as well which seems a bit neater"

* tag 'spi-fix-v5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: tegra20-slink: Declare runtime suspend and resume functions conditionally
  spi: rockchip: handle zero length transfers without timing out

Merge tag 'regulator-fix-v5.15-rc2' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
"A couple of small device specific fixes that have been sent since the
  merge window, neither of which stands out particularly"

* tag 'regulator-fix-v5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: max14577: Revert "regulator: max14577: Add proper module aliases strings"
  regulator: qcom-rpmh-regulator: fix pm8009-1 ldo7 resource name

drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV

nvkm test builds fail with the following error.

  drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info':
  drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5'

The code builds on most architectures, but fails on parisc where ENOSYS
is defined as 251.

Replace the error code with -ENODEV (-19).  The actual error code does
not really matter and is not passed to userspace - it just has to be
negative.

Fixes: 7238eca4cf18 ("drm/nouveau: expose pstate selection per-power source in sysfs")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sparc64: fix pci_iounmap() when CONFIG_PCI is not set

Guenter reported [1] that the pci_iounmap() changes remain problematic,
with sparc64 allnoconfig and tinyconfig still not building due to the
header file changes and confusion with the arch-specific pci_iounmap()
implementation.

I'm pretty convinced that sparc should just use GENERIC_IOMAP instead of
doing its own thing, since it turns out that the sparc64 version of
pci_iounmap() is somewhat buggy (see [2]). But in the meantime, this
just fixes the build by avoiding the trivial re-definition of the empty
case.

Link: https://lore.kernel.org/lkml/20210920134424.GA346531@roeck-us.net/
Link: https://lore.kernel.org/lkml/CAHk-=wgheheFx9myQyy5osh79BAazvmvYURAtub2gQtMvLrhqQ@mail.gmail.com/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'hns3-fixes'

Guangbin Huang says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix a return value error in hclge_get_reset_status()

hclge_get_reset_status() should return the tqp reset status.
However, if the CMDQ fails, the caller will take it as tqp reset
success status by mistake. Therefore, uses a parameters to get
the tqp reset status instead.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: check vlan id before using it

The input parameters may not be reliable, so check the vlan id before
using it, otherwise may set wrong vlan id into hardware.

Fixes: dc8131d846d4 ("net: hns3: Fix for packet loss due wrong filter config in VLAN tbls")
Signed-off-by: liaoguojia <liaoguojia@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: check queue id range before using

The input parameters may not be reliable. Before using the
queue id, we should check this parameter. Otherwise, memory
overwriting may occur.

Fixes: d34100184685 ("net: hns3: refactor the mailbox message between PF and VF")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix misuse vf id and vport id in some logs

vport_id include PF and VFs, vport_id = 0 means PF, other values mean VFs.
So the actual vf id is equal to vport_id minus 1.

Some VF print logs are actually vport, and logs of vf id actually use
vport id, so this patch fixes them.

Fixes: ac887be5b0fe ("net: hns3: change print level of RAS error log from warning to error")
Fixes: adcf738b804b ("net: hns3: cleanup some print format warning")
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix inconsistent vf id print

The vf id from ethtool is added 1 before configured to driver.
So it's necessary to minus 1 when printing it, in order to
keep consistent with user's configuration.

Fixes: dd74f815dd41 ("net: hns3: Add support for rule add/delete for flow director")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix change RSS 'hfunc' ineffective issue

When user change rss 'hfunc' without set rss 'hkey' by ethtool
-X command, the driver will ignore the 'hfunc' for the hkey is
NULL. It's unreasonable. So fix it.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Fixes: 374ad291762a ("net: hns3: Add RSS general configuration support for VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ptp: ocp: add COMMON_CLK dependency

Without CONFIG_COMMON_CLK, this fails to link:

arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_register_i2c':
ptp_ocp.c:(.text+0xcc0): undefined reference to `__clk_hw_register_fixed_rate'
arm-linux-gnueabi-ld: ptp_ocp.c:(.text+0xcf4): undefined reference to `devm_clk_hw_register_clkdev'
arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_detach':
ptp_ocp.c:(.text+0x1c24): undefined reference to `clk_hw_unregister_fixed_rate'

Fixes: a7e1abad13f3 ("ptp: Add clock driver for the OpenCompute TimeCard.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix TX timeout when TX ring size is set to the smallest

The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS
+ 1.  Because the first TX BD for a packet is always a long TX BD, we
need an extra TX BD to fit this packet.  Define BNXT_MIN_TX_DESC_CNT with
this value to make this more clear.  The current code uses a minimum
that is off by 1.  Fix it using this constant.

The tx_wake_thresh to determine when to wake up the TX queue is half the
ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next
packet which may have maximum fragments.  So the comparison of the
available TX BDs with tx_wake_thresh should be >= instead of > in the
current code.  Otherwise, at the smallest ring size, we will never wake
up the TX queue and will cause TX timeout.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadocm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nexthop: Fix division by zero while replacing a resilient group

The resilient nexthop group torture tests in fib_nexthop.sh exposed a
possible division by zero while replacing a resilient group [1]. The
division by zero occurs when the data path sees a resilient nexthop
group with zero buckets.

The tests replace a resilient nexthop group in a loop while traffic is
forwarded through it. The tests do not specify the number of buckets
while performing the replacement, resulting in the kernel allocating a
stub resilient table (i.e, 'struct nh_res_table') with zero buckets.

This table should never be visible to the data path, but the old nexthop
group (i.e., 'oldg') might still be used by the data path when the stub
table is assigned to it.

Fix this by only assigning the stub table to the old nexthop group after
making sure the group is no longer used by the data path.

Tested with fib_nexthops.sh:

Tests passed: 222
Tests failed:   0

[1]
divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 1850 Comm: ping Not tainted 5.14.0-custom-10271-ga86eb53057fe #1107
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
RIP: 0010:nexthop_select_path+0x2d2/0x1a80
[...]
Call Trace:
  fib_select_multipath+0x79b/0x1530
  fib_select_path+0x8fb/0x1c10
  ip_route_output_key_hash_rcu+0x1198/0x2da0
  ip_route_output_key_hash+0x190/0x340
  ip_route_output_flow+0x21/0x120
  raw_sendmsg+0x91d/0x2e10
  inet_sendmsg+0x9e/0xe0
  __sys_sendto+0x23d/0x360
  __x64_sys_sendto+0xe1/0x1b0
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Cc: stable@vger.kernel.org
Fixes: 283a72a5599e ("nexthop: Add implementation of resilient next-hop groups")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

napi: fix race inside napi_enable

The process will cause napi.state to contain NAPI_STATE_SCHED and
not in the poll_list, which will cause napi_disable() to get stuck.

The prefix "NAPI_STATE_" is removed in the figure below, and
NAPI_STATE_HASHED is ignored in napi.state.

                      CPU0       |                   CPU1       | napi.state
===============================================================================
napi_disable()                   |                              | SCHED | NPSVC
napi_enable()                    |                              |
{                                |                              |
    smp_mb__before_atomic();     |                              |
    clear_bit(SCHED, &n->state); |                              | NPSVC
                                 | napi_schedule_prep()         | SCHED | NPSVC
                                 | napi_poll()                  |
                                 |   napi_complete_done()       |
                                 |   {                          |
                                 |      if (n->state & (NPSVC | | (1)
                                 |               _BUSY_POLL)))  |
                                 |           return false;      |
                                 |     ................         |
                                 |   }                          | SCHED | NPSVC
                                 |                              |
    clear_bit(NPSVC, &n->state); |                              | SCHED
}                                |                              |
                                 |                              |
napi_schedule_prep()             |                              | SCHED | MISSED (2)

(1) Here return direct. Because of NAPI_STATE_NPSVC exists.
(2) NAPI_STATE_SCHED exists. So not add napi.poll_list to sd->poll_list

Since NAPI_STATE_SCHED already exists and napi is not in the
sd->poll_list queue, NAPI_STATE_SCHED cannot be cleared and will always
exist.

1. This will cause this queue to no longer receive packets.
2. If you encounter napi_disable under the protection of rtnl_lock, it
   will cause the entire rtnl_lock to be locked, affecting the overall
   system.

This patch uses cmpxchg to implement napi_enable(), which ensures that
there will be no race due to the separation of clear two bits.

Fixes: 2d8bff12699abc ("netpoll: Close race condition between poll_one_napi and napi_disable")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linux 5.15-rc2

pci_iounmap'2: Electric Boogaloo: try to make sense of it all

Nathan Chancellor reports that the recent change to pci_iounmap in
commit 9caea0007601 ("parisc: Declare pci_iounmap() parisc version only
when CONFIG_PCI enabled") causes build errors on arm64.

It took me about two hours to convince myself that I think I know what
the logic of that mess of #ifdef's in the <asm-generic/io.h> header file
really aim to do, and rewrite it to be easier to follow.

Famous last words.

Anyway, the code has now been lifted from that grotty header file into
lib/pci_iomap.c, and has fairly extensive comments about what the logic
is. It also avoids indirecting through another confusing (and badly
named) helper function that has other preprocessor config conditionals.

Let's see what odd architecture did something else strange in this area
to break things. But my arm64 cross build is clean.

Fixes: 9caea0007601 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'x86_urgent_for_v5.15_rc2' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

- Prevent a infinite loop in the MCE recovery on return to user space,
   which was caused by a second MCE queueing work for the same page and
   thereby creating a circular work list.

- Make kern_addr_valid() handle existing PMD entries, which are marked
   not present in the higher level page table, correctly instead of
   blindly dereferencing them.

- Pass a valid address to sanitize_phys(). This was caused by the
   mixture of inclusive and exclusive ranges. memtype_reserve() expect
   'end' being exclusive, but sanitize_phys() wants it inclusive. This
   worked so far, but with end being the end of the physical address
   space the fail is exposed.

- Increase the maximum supported GPIO numbers for 64bit. Newer SoCs
   exceed the previous maximum.

* tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Avoid infinite loop for copy from user recovery
  x86/mm: Fix kern_addr_valid() to cope with existing but not present entries
  x86/platform: Increase maximum GPIO number for X86_64
  x86/pat: Pass valid address to sanitize_phys()

Merge tag 'perf-urgent-2021-09-19' of git://git./linux/kernel/git/tip/tip

Pull perf event fix from Thomas Gleixner:
"A single fix for the perf core where a value read with READ_ONCE() was
  checked and then reread which makes all the checks invalid. Reuse the
  already read value instead"

* tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  events: Reuse value read using READ_ONCE instead of re-reading it

Merge tag 'locking-urgent-2021-09-19' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
"A set of updates for the RT specific reader/writer locking base code:

   - Make the fast path reader ordering guarantees correct.

   - Code reshuffling to make the fix simpler"

[ This plays ugly games with atomic_add_return_release() because we
  don't have a plain atomic_add_release(), and should really be cleaned
  up, I think    - Linus ]

* tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwbase: Take care of ordering guarantee for fastpath reader
  locking/rwbase: Extract __rwbase_write_trylock()
  locking/rwbase: Properly match set_and_save_state() to restore_state()

Merge tag 'powerpc-5.15-2' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix crashes when scv (System Call Vectored) is used to make a syscall
   when a transaction is active, on Power9 or later.

- Fix bad interactions between rfscv (Return-from scv) and Power9
   fake-suspend mode.

- Fix crashes when handling machine checks in LPARs using the Hash MMU.

- Partly revert a recent change to our XICS interrupt controller code,
   which broke the recently added Microwatt support.

Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero,
Joel Stanley, Nicholas Piggin.

* tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/xics: Set the IRQ chip data for the ICS native backend
  powerpc/mce: Fix access error in mce handler
  KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers
  powerpc/64s: system call rfscv workaround for TM bugs
  selftests/powerpc: Add scv versions of the basic TM syscall tests
  powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state

Merge tag 'kbuild-fixes-v5.15' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

- Fix bugs in checkkconfigsymbols.py

- Fix missing sys import in gen_compile_commands.py

- Fix missing FORCE warning for ARCH=sh builds

- Fix -Wignored-optimization-argument warnings for Clang builds

- Turn -Wignored-optimization-argument into an error in order to stop
   building instead of sprinkling warnings

* tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS
  x86/build: Do not add -falign flags unconditionally for clang
  kbuild: Fix comment typo in scripts/Makefile.modpost
  sh: Add missing FORCE prerequisites in Makefile
  gen_compile_commands: fix missing 'sys' package
  checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file
  checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit

Merge tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git./linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- Fix ip display in 'perf script' when output type != attr->type.

- Ignore deprecation warning when using libbpf'sg btf__get_from_id(),
   fixing the build with libbpf v0.6+.

- Make use of FD() robust in libperf, fixing a segfault with 'perf stat
   --iostat list'.

- Initialize addr_location:srcline pointer to NULL when resolving
   callchain addresses.

- Fix fused instruction logic for assembly functions in 'perf
   annotate'.

* tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf bpf: Ignore deprecation warning when using libbpf's btf__get_from_id()
  libperf evsel: Make use of FD robust.
  perf machine: Initialize srcline string member in add_location struct
  perf script: Fix ip display when type != attr->type
  perf annotate: Fix fused instr logic for assembly functions

dmascc: use proper 'virt_to_bus()' rather than casting to 'int'

The old dmascc driver depends on the legacy ISA_DMA_API, and blindly
just casts the kernel virtual address to 'int' for set_dma_addr().

That works only incidentally, and because the high bits of the address
will be ignored anyway. And on 64-bit architectures it causes warnings.

Admittedly, 64-bit architectures with ISA are basically dead - I think
the only example of this is alpha, and nobody would ever use the dmascc
driver there. But hey, the fix is easy enough, the end result is
cleaner, and it's yet another configuration that now builds without
warnings.

If somebody actually uses this driver on an alpha and this fixes it for
you, please email me. Because that is just incredibly bizarre.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alpha: enable GENERIC_PCI_IOMAP unconditionally

With the previous commit (9caea0007601: "parisc: Declare pci_iounmap()
parisc version only when CONFIG_PCI enabled") we can now enable
GENERIC_PCI_IOMAP unconditionally on alpha, and if PCI is not enabled we
will just get the nice empty helper functions that allow mixed-bus
drivers to build.

Example driver: the old 3com/3c59x.c driver works with either the PCI or
the EISA version of the 3x59x card, but wouldn't build in an EISA-only
configuration because of missing pci_iomap() and pci_iounmap() dummy
wrappers.

Most of the other PCI infrastructure just becomes empty wrappers even
without GENERIC_PCI_IOMAP, and it's not obvious that the pci_iomap
functionality shouldn't do the same, but this works.

Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled

Linus noticed odd declaration rules for pci_iounmap() in iomap.h and
pci_iomap.h, where it dependend on either NO_GENERIC_PCI_IOPORT_MAP or
GENERIC_IOMAP when CONFIG_PCI was disabled.

Testing on parisc seems to indicate that we need pci_iounmap() only when
CONFIG_PCI is enabled, so the declaration of pci_iounmap() can be moved
cleanly into pci_iomap.h in sync with the declarations of pci_iomap().

Link: https://lore.kernel.org/all/CAHk-=wjRrh98pZoQ+AzfWmsTZacWxTJKXZ9eKU2X_0+jM=O8nw@mail.gmail.com/
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 97a29d59fc22 ("[PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "drm/vc4: hdmi: Remove drm_encoder->crtc usage"

This reverts commit 27da370e0fb343a0baf308f503bb3e5dcdfe3362.

Sudip Mukherjee reports that this broke pulseaudio with a NULL pointer
dereference in vc4_hdmi_audio_prepare(), bisected it to this commit, and
confirmed that a revert fixed the problem.

Revert the problematic commit until fixed.

Link: https://lore.kernel.org/all/CADVatmPB9-oKd=ypvj25UYysVo6EZhQ6bCM7EvztQBMyiZfAyw@mail.gmail.com/
Link: https://lore.kernel.org/all/CADVatmN5EpRshGEPS_JozbFQRXg5w_8LFB3OMP1Ai-ghxd3w4g@mail.gmail.com/
Reported-and-tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Emma Anholt <emma@anholt.net>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert drm/vc4 hdmi runtime PM changes

This reverts commits

9984d6664ce9 ("drm/vc4: hdmi: Make sure the controller is powered in detect")
411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")

as Michael Stapelberg reports that the new runtime PM changes cause his
Raspberry Pi 3 to hang on boot, probably due to interactions with other
changes in the DRM tree (because a bisect points to the merge in commit
e058a84bfddc: "Merge tag 'drm-next-2021-07-01' of git://.../drm").

Revert these two commits until it's been resolved.

Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/
Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests: net: af_unix: Fix makefile to use TEST_GEN_PROGS

Makefile uses TEST_PROGS instead of TEST_GEN_PROGS to define
executables. TEST_PROGS is for shell scripts that need to be
installed and run by the common lib.mk framework. The common
framework doesn't touch TEST_PROGS when it does build and clean.

As a result "make kselftest-clean" and "make clean" fail to remove
executables. Run and install work because the common framework runs
and installs TEST_PROGS. Build works because the Makefile defines
"all" rule which is unnecessary if TEST_GEN_PROGS is used.

Use TEST_GEN_PROGS so the common framework can handle build/run/
install/clean properly.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx4_en: Resolve bad operstate value

Any link state change that's done prior to net device registration
isn't reflected on the state, thus the operational state is left
obsolete, with 'UNKNOWN' status.

To resolve the issue, query link state from FW upon open operations
to ensure operational state is updated.

Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: net: af_unix: Fix incorrect args in test result msg

Fix the args to fprintf(). Splitting the message ends up passing
incorrect arg for "sigurg %d" and an extra arg overall. The test
result message ends up incorrect.

test_unix_oob.c: In function ‘main’:
test_unix_oob.c:274:43: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘char *’ [-Wformat=]
  274 |   fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ",
      |                                          ~^
      |                                           |
      |                                           int
      |                                          %s
  275 |   "atmark %d\n", signal_recvd, len, oob, atmark);
      |   ~~~~~~~~~~~~~
      |   |
      |   char *
test_unix_oob.c:274:19: warning: too many arguments for format [-Wformat-extra-args]
  274 |   fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ",

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bgmac-bcma: handle deferred probe error due to mac-address

Due to the inclusion of nvmem handling into the mac-address getter
function of_get_mac_address() by
commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address")
it is now possible to get a -EPROBE_DEFER return code. Which did cause
bgmac to assign a random ethernet address.

This exact issue happened on my Meraki MR32. The nvmem provider is
an EEPROM (at24c64) which gets instantiated once the module
driver is loaded... This happens once the filesystem becomes available.

With this patch, bgmac_probe() will propagate the -EPROBE_DEFER error.
Then the driver subsystem will reschedule the probe at a later time.

Cc: Petr Štetiar <ynezz@true.cz>
Cc: Michael Walle <michael@walle.cc>
Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: tear down devlink port regions when tearing down the devlink port on error

Commit 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal")
decided it was fine to ignore errors on certain ports that fail to
probe, and go on with the ports that do probe fine.

Commit fb6ec87f7229 ("net: dsa: Fix type was not set for devlink port")
noticed that devlink_port_type_eth_set(dlp, dp->slave); does not get
called, and devlink notices after a timeout of 3600 seconds and prints a
WARN_ON. So it went ahead to unregister the devlink port. And because
there exists an UNUSED port flavour, we actually re-register the devlink
port as UNUSED.

Commit 08156ba430b4 ("net: dsa: Add devlink port regions support to
DSA") added devlink port regions, which are set up by the driver and not
by DSA.

When we trigger the devlink port deregistration and reregistration as
unused, devlink now prints another WARN_ON, from here:

devlink_port_unregister:
WARN_ON(!list_empty(&devlink_port->region_list));

So the port still has regions, which makes sense, because they were set
up by the driver, and the driver doesn't know we're unregistering the
devlink port.

Somebody needs to tear them down, and optionally (actually it would be
nice, to be consistent) set them up again for the new devlink port.

But DSA's layering stays in our way quite badly here.

The options I've considered are:

1. Introduce a function in devlink to just change a port's type and
   flavour. No dice, devlink keeps a lot of state, it really wants the
   port to not be registered when you set its parameters, so changing
   anything can only be done by destroying what we currently have and
   recreating it.

2. Make DSA cache the parameters passed to dsa_devlink_port_region_create,
   and the region returned, keep those in a list, then when the devlink
   port unregister needs to take place, the existing devlink regions are
   destroyed by DSA, and we replay the creation of new regions using the
   cached parameters. Problem: mv88e6xxx keeps the region pointers in
   chip->ports[port].region, and these will remain stale after DSA frees
   them. There are many things DSA can do, but updating mv88e6xxx's
   private pointers is not one of them.

3. Just let the driver do it (i.e. introduce a very specific method
   called ds->ops->port_reinit_as_unused, which unregisters its devlink
   port devlink regions, then the old devlink port, then registers the
   new one, then the devlink port regions for it). While it does work,
   as opposed to the others, it's pretty horrible from an API
   perspective and we can do better.

4. Introduce a new pair of methods, ->port_setup and ->port_teardown,
   which in the case of mv88e6xxx must register and unregister the
   devlink port regions. Call these 2 methods when the port must be
   reinitialized as unused.

Naturally, I went for the 4th approach.

Fixes: 08156ba430b4 ("net: dsa: Add devlink port regions support to DSA")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: freescale: drop unneeded MODULE_ALIAS

The MODULE_DEVICE_TABLE already creates proper alias for platform
driver. Having another MODULE_ALIAS causes the alias to be duplicated.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ocelot-phylink-fixes'

Colin Foster says:

====================
ocelot phylink fixes

When the ocelot driver was migrated to phylink, e6e12df625f2 ("net:
mscc: ocelot: convert to phylink") there were two additional writes to
registers that became stale. One write was to DEV_CLOCK_CFG and one was
to ANA_PFC_PCF_CFG.

Both of these writes referenced the variable "speed" which originally
was set to OCELOT_SPEED_{10,100,1000,2500}. These macros expand to
values of 3, 2, 1, or 0, respectively. After the update, the variable
speed is set to SPEED_{10,100,1000,2500} which expand to 10, 100, 1000,
and 2500. So invalid values were getting written to the two registers,
which would lead to either a lack of functionality or undefined
funcationality.

Fixing these values was the intent of v1 of this patch set - submitted
as "[PATCH v1 net] net: ethernet: mscc: ocelot: bug fix when writing MAC
speed"

During that review it was determined that both writes were actually
unnecessary. DEV_CLOCK_CFG is a duplicate write, so can be removed
entirely. This was accidentally submitted as as a new, lone patch titled
"[PATCH v1 net] net: mscc: ocelot: remove buggy duplicate write to
DEV_CLOCK_CFG". This is part of what is considered v2 of this patch set.

Additionally, the write to ANA_PFC_PFC_CFG is also unnecessary. Priority
flow contol is disabled, so configuring it is useless and should be
removed. This was also submitted as a new, lone patch titled "[PATCH v1
net] net: mscc: ocelot: remove buggy and useless write to ANA_PFC_PFC_CFG".
This is the rest of what is considered v2 of this patch set.

v3
Identical to v2, but fixes the patch numbering to v3 and submitting the
two changes as a patch set.

v2
Note: I misunderstood and submitted two new "v1" patches instead of a
single "v2" patch set.
- Remove the buggy writes altogher
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: mscc: ocelot: remove buggy duplicate write to DEV_CLOCK_CFG

When updating ocelot to use phylink, a second write to DEV_CLOCK_CFG was
mistakenly left in. It used the variable "speed" which, previously, would
would have been assigned a value of OCELOT_SPEED_1000. In phylink the
variable is be SPEED_1000, which is invalid for the
DEV_CLOCK_LINK_SPEED macro. Removing it as unnecessary and buggy.

Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mscc: ocelot: remove buggy and useless write to ANA_PFC_PFC_CFG

A useless write to ANA_PFC_PFC_CFG was left in while refactoring ocelot to
phylink. Since priority flow control is disabled, writing the speed has no
effect.

Further, it was using ethtool.h SPEED_ instead of OCELOT_SPEED_ macros,
which are incorrectly offset for GENMASK.

Lastly, for priority flow control to properly function, some scenarios
would rely on the rate adaptation from the PCS while the MAC speed would
be fixed. So it isn't used, and even if it was, neither "speed" nor
"mac_speed" are necessarily the correct values to be used.

Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: core: Correct the sock::sk_lock.owned lockdep annotations

lock_sock_fast() and lock_sock_nested() contain lockdep annotations for the
sock::sk_lock.owned 'mutex'. sock::sk_lock.owned is not a regular mutex. It
is just lockdep wise equivalent. In fact it's an open coded trivial mutex
implementation with some interesting features.

sock::sk_lock.slock is a regular spinlock protecting the 'mutex'
representation sock::sk_lock.owned which is a plain boolean. If 'owned' is
true, then some other task holds the 'mutex', otherwise it is uncontended.
As this locking construct is obviously endangered by lock ordering issues as
any other locking primitive it got lockdep annotated via a dedicated
dependency map sock::sk_lock.dep_map which has to be updated at the lock
and unlock sites.

lock_sock_nested() is a straight forward 'mutex' lock operation:

  might_sleep();
  spin_lock_bh(sock::sk_lock.slock)
  while (!try_lock(sock::sk_lock.owned)) {
      spin_unlock_bh(sock::sk_lock.slock);
      wait_for_release();
      spin_lock_bh(sock::sk_lock.slock);
  }

The lockdep annotation for sock::sk_lock.owned is for unknown reasons
_after_ the lock has been acquired, i.e. after the code block above and
after releasing sock::sk_lock.slock, but inside the bottom halves disabled
region:

  spin_unlock(sock::sk_lock.slock);
  mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_);
  local_bh_enable();

The placement after the unlock is obvious because otherwise the
mutex_acquire() would nest into the spin lock held region.

But that's from the lockdep perspective still the wrong place:

1) The mutex_acquire() is issued _after_ the successful acquisition which
    is pointless because in a dead lock scenario this point is never
    reached which means that if the deadlock is the first instance of
    exposing the wrong lock order lockdep does not have a chance to detect
    it.

2) It only works because lockdep is rather lax on the context from which
    the mutex_acquire() is issued. Acquiring a mutex inside a bottom halves
    and therefore non-preemptible region is obviously invalid, except for a
    trylock which is clearly not the case here.

    This 'works' stops working on RT enabled kernels where the bottom halves
    serialization is done via a local lock, which exposes this misplacement
    because the 'mutex' and the local lock nest the wrong way around and
    lockdep complains rightfully about a lock inversion.

The placement is wrong since the initial commit a5b5bb9a053a ("[PATCH]
lockdep: annotate sk_locks") which introduced this.

Fix it by moving the mutex_acquire() in front of the actual lock
acquisition, which is what the regular mutex_lock() operation does as well.

lock_sock_fast() is not that straight forward. It looks at the first glance
like a convoluted trylock operation:

  spin_lock_bh(sock::sk_lock.slock)
  if (!sock::sk_lock.owned)
      return false;
  while (!try_lock(sock::sk_lock.owned)) {
      spin_unlock_bh(sock::sk_lock.slock);
      wait_for_release();
      spin_lock_bh(sock::sk_lock.slock);
  }
  spin_unlock(sock::sk_lock.slock);
  mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_);
  local_bh_enable();
  return true;

But that's not the case: lock_sock_fast() is an interesting optimization
for short critical sections which can run with bottom halves disabled and
sock::sk_lock.slock held. This allows to shortcut the 'mutex' operation in
the non contended case by preventing other lockers to acquire
sock::sk_lock.owned because they are blocked on sock::sk_lock.slock, which
in turn avoids the overhead of doing the heavy processing in release_sock()
including waking up wait queue waiters.

In the contended case, i.e. when sock::sk_lock.owned == true the behavior
is the same as lock_sock_nested().

Semantically this shortcut means, that the task acquired the 'mutex' even
if it does not touch the sock::sk_lock.owned field in the non-contended
case. Not telling lockdep about this shortcut acquisition is hiding
potential lock ordering violations in the fast path.

As a consequence the same reasoning as for the above lock_sock_nested()
case vs. the placement of the lockdep annotation applies.

The current placement of the lockdep annotation was just copied from
the original lock_sock(), now renamed to lock_sock_nested(),
implementation.

Fix this by moving the mutex_acquire() in front of the actual lock
acquisition and adding the corresponding mutex_release() into
unlock_sock_fast(). Also document the fast path return case with a comment.

Reported-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

docs: net: dsa: sja1105: fix reference to sja1105.txt

The file sja1105.txt was converted to nxp,sja1105.yaml.

Signed-off-by: Alejandro Concepcion-Rodriguez <asconcepcion@acoro.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

igc: fix build errors for PTP

When IGC=y and PTP_1588_CLOCK=m, the ptp_*() interface family is
not available to the igc driver. Make this driver depend on
PTP_1588_CLOCK_OPTIONAL so that it will build without errors.

Various igc commits have used ptp_*() functions without checking
that PTP_1588_CLOCK is enabled. Fix all of these here.

Fixes these build errors:

ld: drivers/net/ethernet/intel/igc/igc_main.o: in function `igc_msix_other':
igc_main.c:(.text+0x6494): undefined reference to `ptp_clock_event'
ld: igc_main.c:(.text+0x64ef): undefined reference to `ptp_clock_event'
ld: igc_main.c:(.text+0x6559): undefined reference to `ptp_clock_event'
ld: drivers/net/ethernet/intel/igc/igc_ethtool.o: in function `igc_ethtool_get_ts_info':
igc_ethtool.c:(.text+0xc7a): undefined reference to `ptp_clock_index'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_feature_enable_i225':
igc_ptp.c:(.text+0x330): undefined reference to `ptp_find_pin'
ld: igc_ptp.c:(.text+0x36f): undefined reference to `ptp_find_pin'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_init':
igc_ptp.c:(.text+0x11cd): undefined reference to `ptp_clock_register'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_stop':
igc_ptp.c:(.text+0x12dd): undefined reference to `ptp_clock_unregister'
ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe':

Fixes: 64433e5bf40ab ("igc: Enable internal i225 PPS")
Fixes: 60dbede0c4f3d ("igc: Add support for ethtool GET_TS_INFO command")
Fixes: 87938851b6efb ("igc: enable auxiliary PHC functions for the i225")
Fixes: 5f2958052c582 ("igc: Add basic skeleton for PTP")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ederson de Souza <ederson.desouza@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enetc: Fix uninitialized struct dim_sample field usage

The only struct dim_sample member that does not get
initialized by dim_update_sample() is comp_ctr. (There
is special API to initialize comp_ctr:
dim_update_sample_with_comps(), and it is currently used
only for RDMA.) comp_ctr is used to compute curr_stats->cmps
and curr_stats->cpe_ratio (see dim_calc_stats()) which in
turn are consumed by the rdma_dim_*() API. Therefore,
functionally, the net_dim*() API consumers are not affected.
Nevertheless, fix the computation of statistics based
on an uninitialized variable, even if the mentioned statistics
are not used at the moment.

Fixes: ae0e6a5d1627 ("enetc: Add adaptive interrupt coalescing")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enetc: Fix illegal access when reading affinity_hint

irq_set_affinity_hit() stores a reference to the cpumask_t
parameter in the irq descriptor, and that reference can be
accessed later from irq_affinity_hint_proc_show(). Since
the cpu_mask parameter passed to irq_set_affinity_hit() has
only temporary storage (it's on the stack memory), later
accesses to it are illegal. Thus reads from the corresponding
procfs affinity_hint file can result in paging request oops.

The issue is fixed by the get_cpu_mask() helper, which provides
a permanent storage for the cpumask_t parameter.

Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio-net: fix pages leaking when building skb in big mode

We try to use build_skb() if we had sufficient tailroom. But we forget
to release the unused pages chained via private in big mode which will
leak pages. Fixing this by release the pages after building the skb in
big mode.

Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xen-netback: correct success/error reporting for the SKB-with-fraglist case

When re-entering the main loop of xenvif_tx_check_gop() a 2nd time, the
special considerations for the head of the SKB no longer apply. Don't
mistakenly report ERROR to the frontend for the first entry in the list,
even if - from all I can tell - this shouldn't matter much as the overall
transmit will need to be considered failed anyway.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'dsa-shutdown'

Vladimir Oltean says:

====================
Make DSA switch drivers compatible with masters which unregister on shutdown

Changes in v2:
- fix build for b53_mmap
- use unregister_netdevice_many

It was reported by Lino here:

https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/

that when the DSA master attempts to unregister its net_device on
shutdown, DSA should prevent that operation from succeeding because it
holds a reference to it. This hangs the shutdown process.

This issue was essentially introduced in commit 2f1e8ea726e9 ("net: dsa:
link interfaces with the DSA master to get rid of lockdep warnings").
The present series patches all DSA drivers to handle that case,
depending on whether those drivers were introduced before or after the
offending commit, a different Fixes: tag is specified for them.

The approach taken by this series solves the issue in essentially the
same way as Lino's patches, except for three key differences:

- this series takes a more minimal approach in what is done on shutdown,
  we do not attempt a full tree teardown as that is not strictly
  necessary. I might revisit this if there are compelling reasons to do
  otherwise

- this series fixes the issues for all DSA drivers, not just KSZ9897

- this series works even if the ->remove driver method gets called for
  the same device too, not just ->shutdown. This is really possible to
  happen for SPI device drivers, and potentially possible for other bus
  device drivers too.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: xrs700x: be compatible with masters which unregister on shutdown

Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA
master to get rid of lockdep warnings"), DSA gained a requirement which
it did not fulfill, which is to unlink itself from the DSA master at
shutdown time.

Since the Arrow SpeedChips XRS700x driver was introduced after the bad
commit, it has never worked with DSA masters which decide to unregister
their net_device on shutdown, effectively hanging the reboot process.
To fix that, we need to call dsa_switch_shutdown.

These devices can be connected by I2C or by MDIO, and if I search for
I2C or MDIO bus drivers that implement their ->shutdown by redirecting
it to ->remove I don't see any, however this does not mean it would not
be possible. To be compatible with that pattern, it is necessary to
implement an "if this then not that" scheme, to avoid ->remove and
->shutdown from being called both for the same struct device.

Fixes: ee00b24f32eb ("net: dsa: add Arrow SpeedChips XRS700x driver")
Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: ksz8863: be compatible with masters which unregister on shutdown

Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA
master to get rid of lockdep warnings"), DSA gained a requirement which
it did not fulfill, which is to unlink itself from the DSA master at
shutdown time.

Since the Microchip sub-driver for KSZ8863 was introduced after the bad
commit, it has never worked with DSA masters which decide to unregister
their net_device on shutdown, effectively hanging the reboot process.
To fix that, we need to call dsa_switch_shutdown.

Since this driver expects the MDIO bus to be backed by mdio_bitbang, I
don't think there is currently any MDIO bus driver which implements its
->shutdown by redirecting it to ->remove, but in any case, to be
compatible with that pattern, it is necessary to implement an "if this
then not that" scheme, to avoid ->remove and ->shutdown from being
called both for the same struct device.

Fixes: 60a364760002 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support")
Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: hellcreek: be compatible with masters which unregister on shutdown

Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA
master to get rid of lockdep warnings"), DSA gained a requirement which
it did not fulfill, which is to unlink itself from the DSA master at
shutdown time.

Since the hellcreek driver was introduced after the bad commit, it has
never worked with DSA masters which decide to unregister their
net_device on shutdown, effectively hanging the reboot process.

Hellcreek is a platform device driver, so we probably cannot have the
oddities of ->shutdown and ->remove getting both called for the exact
same struct device. But to be in line with the pattern from the other
device drivers which are on slow buses, implement the same "if this then
not that" pattern of either running the ->shutdown or the ->remove hook.
The driver's current ->remove implementation makes that very easy
because it already zeroes out its device_drvdata on ->remove.

Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches")
Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: be compatible with masters which unregister on shutdown

Lino reports that on his system with bcmgenet as DSA master and KSZ9897
as a switch, rebooting or shutting down never works properly.

What does the bcmgenet driver have special to trigger this, that other
DSA masters do not? It has an implementation of ->shutdown which simply
calls its ->remove implementation. Otherwise said, it unregisters its
network interface on shutdown.

This message can be seen in a loop, and it hangs the reboot process there:

unregister_netdevice: waiting for eth0 to become free. Usage count = 3

So why 3?

A usage count of 1 is normal for a registered network interface, and any
virtual interface which links itself as an upper of that will increment
it via dev_hold. In the case of DSA, this is the call path:

dsa_slave_create
-> netdev_upper_dev_link
   -> __netdev_upper_dev_link
      -> __netdev_adjacent_dev_insert
         -> dev_hold

So a DSA switch with 3 interfaces will result in a usage count elevated
by two, and netdev_wait_allrefs will wait until they have gone away.

Other stacked interfaces, like VLAN, watch NETDEV_UNREGISTER events and
delete themselves, but DSA cannot just vanish and go poof, at most it
can unbind itself from the switch devices, but that must happen strictly
earlier compared to when the DSA master unregisters its net_device, so
reacting on the NETDEV_UNREGISTER event is way too late.

It seems that it is a pretty established pattern to have a driver's
->shutdown hook redirect to its ->remove hook, so the same code is
executed regardless of whether the driver is unbound from the device, or
the system is just shutting down. As Florian puts it, it is quite a big
hammer for bcmgenet to unregister its net_device during shutdown, but
having a common code path with the driver unbind helps ensure it is well
tested.

So DSA, for better or for worse, has to live with that and engage in an
arms race of implementing the ->shutdown hook too, from all individual
drivers, and do something sane when paired with masters that unregister
their net_device there. The only sane thing to do, of course, is to
unlink from the master.

However, complications arise really quickly.

The pattern of redirecting ->shutdown to ->remove is not unique to
bcmgenet or even to net_device drivers. In fact, SPI controllers do it
too (see dspi_shutdown -> dspi_remove), and presumably, I2C controllers
and MDIO controllers do it too (this is something I have not researched
too deeply, but even if this is not the case today, it is certainly
plausible to happen in the future, and must be taken into consideration).

Since DSA switches might be SPI devices, I2C devices, MDIO devices, the
insane implication is that for the exact same DSA switch device, we
might have both ->shutdown and ->remove getting called.

So we need to do something with that insane environment. The pattern
I've come up with is "if this, then not that", so if either ->shutdown
or ->remove gets called, we set the device's drvdata to NULL, and in the
other hook, we check whether the drvdata is NULL and just do nothing.
This is probably not necessary for platform devices, just for devices on
buses, but I would really insist for consistency among drivers, because
when code is copy-pasted, it is not always copy-pasted from the best
sources.

So depending on whether the DSA switch's ->remove or ->shutdown will get
called first, we cannot really guarantee even for the same driver if
rebooting will result in the same code path on all platforms. But
nonetheless, we need to do something minimally reasonable on ->shutdown
too to fix the bug. Of course, the ->remove will do more (a full
teardown of the tree, with all data structures freed, and this is why
the bug was not caught for so long). The new ->shutdown method is kept
separate from dsa_unregister_switch not because we couldn't have
unregistered the switch, but simply in the interest of doing something
quick and to the point.

The big question is: does the DSA switch's ->shutdown get called earlier
than the DSA master's ->shutdown? If not, there is still a risk that we
might still trigger the WARN_ON in unregister_netdevice that says we are
attempting to unregister a net_device which has uppers. That's no good.
Although the reference to the master net_device won't physically go away
even if DSA's ->shutdown comes afterwards, remember we have a dev_hold
on it.

The answer to that question lies in this comment above device_link_add:

* A side effect of the link creation is re-ordering of dpm_list and the
* devices_kset list by moving the consumer device and all devices depending
* on it to the ends of these lists (that does not happen to devices that have
* not been registered when this function is called).

so the fact that DSA uses device_link_add towards its master is not
exactly for nothing. device_shutdown() walks devices_kset from the back,
so this is our guarantee that DSA's shutdown happens before the master's
shutdown.

Fixes: 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings")
Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/
Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mdio: introduce a shutdown method to mdio device drivers

MDIO-attached devices might have interrupts and other things that might
need quiesced when we kexec into a new kernel. Things are even more
creepy when those interrupt lines are shared, and in that case it is
absolutely mandatory to disable all interrupt sources.

Moreover, MDIO devices might be DSA switches, and DSA needs its own
shutdown method to unlink from the DSA master, which is a new
requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link
interfaces with the DSA master to get rid of lockdep warnings").

So introduce a ->shutdown method in the MDIO device driver structure.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS

Similar to commit 589834b3a009 ("kbuild: Add
-Werror=unknown-warning-option to CLANG_FLAGS").

Clang ignores certain GCC flags that it has not implemented, only
emitting a warning:

$ echo | clang -fsyntax-only -falign-jumps -x c -
clang-14: warning: optimization flag '-falign-jumps' is not supported
[-Wignored-optimization-argument]

When one of these flags gets added to KBUILD_CFLAGS unconditionally, all
subsequent cc-{disable-warning,option} calls fail because -Werror was
added to these invocations to turn the above warning and the equivalent
-W flag warning into errors.

To catch the presence of these flags earlier, turn
-Wignored-optimization-argument into an error so that the flags can
either be implemented or ignored via cc-option and there are no more
weird errors.

Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

x86/build: Do not add -falign flags unconditionally for clang

clang does not support -falign-jumps and only recently gained support
for -falign-loops. When one of the configuration options that adds these
flags is enabled, clang warns and all cc-{disable-warning,option} that
follow fail because -Werror gets added to test for the presence of this
warning:

clang-14: warning: optimization flag '-falign-jumps=0' is not supported
[-Wignored-optimization-argument]

To resolve this, add a couple of cc-option calls when building with
clang; gcc has supported these options since 3.2 so there is no point in
testing for their support. -falign-functions was implemented in clang-7,
-falign-loops was implemented in clang-14, and -falign-jumps has not
been implemented yet.

Link: https://lore.kernel.org/r/YSQE2f5teuvKLkON@Ryzen-9-3900X.localdomain/
Link: https://lore.kernel.org/r/20210824022640.2170859-2-nathan@kernel.org/
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

kbuild: Fix comment typo in scripts/Makefile.modpost

Change comment "create one <module>.mod.c file pr. module"
to "create one <module>.mod.c file per module"

Signed-off-by: Ramji Jiyani <ramjiyani@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

sh: Add missing FORCE prerequisites in Makefile

make:

arch/sh/boot/Makefile:87: FORCE prerequisite is missing

Add the missing FORCE prerequisites for all build targets identified by
"make help".

Fixes: e1f86d7b4b2a5213 ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

gen_compile_commands: fix missing 'sys' package

We need to import the 'sys' package since the script has called
sys.exit() method.

Fixes: 6ad7cbc01527 ("Makefile: Add clang-tidy and static analyzer support to makefile")
Signed-off-by: Kortan <kortanzh@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file

When parsing Kconfig files to find symbol definitions and references,
lines after a 'help' line are skipped until a new config definition
starts.

However, Kconfig statements can actually be after a help section, as
long as these have shallower indentation. These are skipped by the
parser.

This means that symbols referenced in this kind of statements are
ignored by this function and thus are not considered undefined
references in case the symbol is not defined.

Remove the 'skip' logic entirely, as it is not needed if we just use the
STMT regex to find the end of help lines.

However, this means that keywords that appear as part of the help
message (i.e. with the same indentation as the help lines) it will be
considered as a reference/definition. This can happen now as well, but
only with REGEX_KCONFIG_DEF lines. Also, the keyword must have a SYMBOL
after it, which probably means that someone referenced a config in the
help so it seems like a bonus :)

The real solution is to keep track of the indentation when a the first
help line in encountered and then handle DEF and STMT lines only if the
indentation is shallower.

Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit

As opposed to the --diff option, --commit can get ref names instead of
commit hashes.

When using the --commit option, the script resets the working directory
to the commit before the given ref, by adding '~' to the end of the ref.

However, the 'HEAD' ref is relative, and so when the working directory
is reset to 'HEAD~', 'HEAD' points to what was 'HEAD~'. Then when the
script resets to 'HEAD' it actually stays in the same commit. In this
case, the script won't report any cases because there is no diff between
the cases of the two refs.

Prevent the user from using HEAD refs.

A better solution might be to resolve the refs before doing the
reset, but for now just disallow such refs.

Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

alpha: move __udiv_qrnnd library function to arch/alpha/lib/

We already had the implementation for __udiv_qrnnd (unsigned divide for
multi-precision arithmetic) as part of the alpha math emulation code.

But you can disable the math emulation code - even if you shouldn't -
and then the MPI code that actually wants this functionality (and is
needed by various crypto functions) will fail to build.

So move the extended-precision divide code to be a regular library
function, just like all the regular division code is. That way ie is
available regardless of math-emulation.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alpha: mark 'Jensen' platform as no longer broken

Ok, it almost certainly is still broken on actual hardware, but the
immediate reason for it having been marked BROKEN was a build error that
is fixed by just making sure the low-level IO header file is included
sufficiently early that the __EXTERN_INLINE hackery takes effect.

This was marked broken back in 2017 by commit 1883c9f49d02 ("alpha: mark
jensen as broken"), but Ulrich Teichert made me look at it as part of my
cross-build work to make sure -Werror actually does the right thing.

There are lots of alpha configurations that do not build cleanly, but
now it's no longer because Jensen wouldn't be buildable. That said,
because the Jensen platform doesn't force PCI to be enabled (Jensen only
had EISA), it ends up being somewhat interesting as a source of odd
configs.

Reported-by: Ulrich Teichert <krypton@ulrich-teichert.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

perf bpf: Ignore deprecation warning when using libbpf's btf__get_from_id()

Perf code re-implements libbpf's btf__load_from_kernel_by_id() API as
a weak function, presumably to dynamically link against old version of
libbpf shared library. Unfortunately this causes compilation warning
when perf is compiled against libbpf v0.6+.

For now, just ignore deprecation warning, but there might be a better
solution, depending on perf's needs.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: kernel-team@fb.com
LPU-Reference: 20210914170004.4185659-1-andrii@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>