Merge tag 'mt76-for-kvalo-2021-10-20' of https://github.com/nbd168/wireless

mt76 patches for 5.16

* various bugfixes
* endian fixes
* mt7921 aspm support
* cleanup
* mt7921 testmode support
* rate handling fixes
* tx status fixes/improvements
* mt7921 power management improvements
* mt7915 LED support
* DBDC fixes
* mt7921 6GHz support
* support for eeprom data in DT
* mt7915 TWT support
* mt7915 txbf + MU-MIMO improvements

# gpg: Signature made Wed 20 Oct 2021 12:24:46 PM EEST
# gpg:                using DSA key D77D141D02A76EF5
# gpg: Good signature from "Felix Fietkau <nbd@nbd.name>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 75D1 1A7D 91A7 710F 4900  42EF D77D 141D 02A7 6EF5

zd1201: use eth_hw_addr_set()

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-16-kuba@kernel.org

wl3501_cs: use eth_hw_addr_set()

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-15-kuba@kernel.org

ray_cs: use eth_hw_addr_set()

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-14-kuba@kernel.org

wilc1000: use eth_hw_addr_set()

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-13-kuba@kernel.org

hostap: use eth_hw_addr_set()

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-11-kuba@kernel.org

ipw2200: prepare for const netdev->dev_addr

netdev->dev_addr will be come const soon, constify the argument
to command send to avoid compiler warnings.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-10-kuba@kernel.org

airo: use eth_hw_addr_set()

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Use dev_addr_set() to match the existing logic.
setup_card() is always passed netdev->dev_addr, so pass the netdev
pointer instead and assign the address using a helper there.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-9-kuba@kernel.org

brcmfmac: prepare for const netdev->dev_addr

netdev->dev_addr will become const soon. Make sure local
variables maintain that qualifier.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-8-kuba@kernel.org

atmel: use eth_hw_addr_set()

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Use a buffer on the stack. Note that atmel_get_mib() is a wrapper
around atmel_copy_to_host(). For the to device direction we just
need to make sure functions respect argument being cost.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-7-kuba@kernel.org

wil6210: use eth_hw_addr_set()

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Do the special encoding on the stack, then copy the address.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-6-kuba@kernel.org

ath6kl: use eth_hw_addr_set()

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Do the special encoding on the stack, then copy the address.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-5-kuba@kernel.org

wireless: use eth_hw_addr_set() for dev->addr_len cases

Convert all WiFi drivers from memcpy(... dev->addr_len)
to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - memcpy(dev->dev_addr, np, dev->addr_len)
  + eth_hw_addr_set(dev, np)

Manually checked the netdevs are allocated with alloc_etherdev(),
so dev->addr_len must be equal to ETH_ALEN.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-4-kuba@kernel.org

wireless: use eth_hw_addr_set() instead of ether_addr_copy()

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Convert wireless from ether_addr_copy() to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - ether_addr_copy(dev->dev_addr, np)
  + eth_hw_addr_set(dev, np)

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-3-kuba@kernel.org

wireless: use eth_hw_addr_set()

Convert all WiFi drivers from memcpy(... ETH_ADDR)
to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - memcpy(dev->dev_addr, np, ETH_ALEN)
  + eth_hw_addr_set(dev, np)

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018235021.1279697-2-kuba@kernel.org

iwlwifi: cfg: set low-latency-xtal for some integrated So devices

The integrated So devices covered by the iwl_so_long_latency_trans_cfg
configuration should all have low-latency-xtal enabled, so do that.
While at it, remove the TODO, I've checked the other values as well.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 6f60fb03c8e7 ("iwlwifi: move SnJ and So rules to the new tables")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211016114029.8b5480113f53.I80b5b4ebea84e56f3b3143fc1ee7097be8b4ae78@changeid

iwlwifi: pnvm: read EFI data only if long enough

If the data we get from EFI is not even long enough for
the package struct we expect then ignore it entirely.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: a1a6a4cf49ec ("iwlwifi: pnvm: implement reading PNVM from UEFI")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211016114029.33feba783518.I54a5cf33975d0330792b3d208b225d479e168f32@changeid

iwlwifi: pnvm: don't kmemdup() more than we have

We shouldn't kmemdup() more data than we have, that might
cause the code to crash. Fix that by updating the length
before the kmemdup.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211016114029.ab0e64c3fba9.Ic6a3295fc384750b51b4270bf0b7d94984a139f2@changeid

iwlwifi: change all JnP to NO-160 configuration

JnP should not have the 160 MHz.

Signed-off-by: Yaara Baruch <yaara.baruch@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211016114029.ee163f4a7513.I7f87bd969a0b038c7f3a1a962d9695ffd18c5da1@changeid

iwlwifi: mvm: reset PM state on unsuccessful resume

If resume fails for some reason, we need to set the PM state
back to normal so we're able to send commands during firmware
reset, rather than failing all of them because we're in D3.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 708a39aaca22 ("iwlwifi: mvm: don't send commands during suspend\resume transition")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211016114029.7ceb9eaca9f6.If0cbef38c6d07ec1ddce125878a4bdadcb35d2c9@changeid

Merge ath-next from git://git./linux/kernel/git/kvalo/ath.git

ath.git patches for v5.16. Major changes:

ath9k

* add option to reset the wifi chip via debugfs

* convert Device Tree bindings to the json-schema

* support Device Tree ieee80211-freq-limit property to limit channels

mwifiex: Deactive host sleep using HSCFG after it was activated manually

When powersaving (so either wifi powersaving or deep sleep, depending on
which state the firmware is in) is disabled, the way the firmware goes
into host sleep is different: Usually the firmware implicitely enters
host sleep on the next SLEEP event we get when we configured host sleep
via HSCFG before. When powersaving is disabled though, there are no
SLEEP events, the way we enter host sleep in that case is different: The
firmware will send us a HS_ACT_REQ event and after that we "manually"
make the firmware enter host sleep by sending it another HSCFG command
with the action HS_ACTIVATE.

Now waking up from host sleep appears to be different depending on
whether powersaving is enabled again: When powersaving is enabled, the
firmware implicitely leaves host sleep as soon as it wakes up and sends
us an AWAKE event. When powersaving is disabled though, it apparently
doesn't implicitely leave host sleep, but instead we need to send it a
HSCFG command with the HS_CONFIGURE action and the HS_CFG_CANCEL
condition. We didn't do that so far, which is why waking up from host
sleep was broken when powersaving is disabled.

So add some additional state to mwifiex_adapter where we keep track of
whether host sleep was activated manually via HS_ACTIVATE, and if that
was the case, deactivate it manually again via HS_CFG_CANCEL.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211016153244.24353-6-verdre@v0yd.nl

mwifiex: Send DELBA requests according to spec

While looking at on-air packets using Wireshark, I noticed we're never
setting the initiator bit when sending DELBA requests to the AP: While
we set the bit on our del_ba_param_set bitmask, we forget to actually
copy that bitmask over to the command struct, which means we never
actually set the initiator bit.

Fix that and copy the bitmask over to the host_cmd_ds_11n_delba command
struct.

Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Acked-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211016153244.24353-5-verdre@v0yd.nl

mwifiex: Fix an incorrect comment

We're sending DELBA requests here, not ADDBA requests.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211016153244.24353-4-verdre@v0yd.nl

mwifiex: Log an error on command failure during key-material upload

Sometimes the KEY_MATERIAL command can fail with the 88W8897 firmware
(when this happens exactly seems pretty random). This appears to prevent
the access point from starting, so it seems like a good idea to log an
error in that case.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211016153244.24353-3-verdre@v0yd.nl

mwifiex: Don't log error on suspend if wake-on-wlan is disabled

It's not an error if someone chooses to put their computer to sleep, not
wanting it to wake up because the person next door has just discovered
what a magic packet is. So change the loglevel of this annoying message
from ERROR to INFO.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211016153244.24353-2-verdre@v0yd.nl

rtw89: remove unneeded semicolon

Eliminate the following coccicheck warning:
./drivers/net/wireless/realtek/rtw89/pci.c:1348:2-3: Unneeded semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1634630094-1156-1-git-send-email-yang.lee@linux.alibaba.com

rtw89: fix return value check in rtw89_cam_send_sec_key_cmd()

Fix the return value check which testing the wrong variable
in rtw89_cam_send_sec_key_cmd().

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211018033102.1813058-1-yangyingliang@huawei.com

mwl8k: Fix use-after-free in mwl8k_fw_state_machine()

When the driver fails to request the firmware, it calls its error
handler. In the error handler, the driver detaches device from driver
first before releasing the firmware, which can cause a use-after-free bug.

Fix this by releasing firmware first.

The following log reveals it:

[    9.007301 ] BUG: KASAN: use-after-free in mwl8k_fw_state_machine+0x320/0xba0
[    9.010143 ] Workqueue: events request_firmware_work_func
[    9.010830 ] Call Trace:
[    9.010830 ]  dump_stack_lvl+0xa8/0xd1
[    9.010830 ]  print_address_description+0x87/0x3b0
[    9.010830 ]  kasan_report+0x172/0x1c0
[    9.010830 ]  ? mutex_unlock+0xd/0x10
[    9.010830 ]  ? mwl8k_fw_state_machine+0x320/0xba0
[    9.010830 ]  ? mwl8k_fw_state_machine+0x320/0xba0
[    9.010830 ]  __asan_report_load8_noabort+0x14/0x20
[    9.010830 ]  mwl8k_fw_state_machine+0x320/0xba0
[    9.010830 ]  ? mwl8k_load_firmware+0x5f0/0x5f0
[    9.010830 ]  request_firmware_work_func+0x172/0x250
[    9.010830 ]  ? read_lock_is_recursive+0x20/0x20
[    9.010830 ]  ? process_one_work+0x7a1/0x1100
[    9.010830 ]  ? request_firmware_nowait+0x460/0x460
[    9.010830 ]  ? __this_cpu_preempt_check+0x13/0x20
[    9.010830 ]  process_one_work+0x9bb/0x1100

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1634356979-6211-1-git-send-email-zheyuma97@gmail.com

rsi: stop thread firstly in rsi_91x_init() error handling

When fail to init coex module, free 'common' and 'adapter' directly, but
common->tx_thread which will access 'common' and 'adapter' is running at
the same time. That will trigger the UAF bug.

==================================================================
BUG: KASAN: use-after-free in rsi_tx_scheduler_thread+0x50f/0x520 [rsi_91x]
Read of size 8 at addr ffff8880076dc000 by task Tx-Thread/124777
CPU: 0 PID: 124777 Comm: Tx-Thread Not tainted 5.15.0-rc5+ #19
Call Trace:
 dump_stack_lvl+0xe2/0x152
 print_address_description.constprop.0+0x21/0x140
 ? rsi_tx_scheduler_thread+0x50f/0x520
 kasan_report.cold+0x7f/0x11b
 ? rsi_tx_scheduler_thread+0x50f/0x520
 rsi_tx_scheduler_thread+0x50f/0x520
...

Freed by task 111873:
 kasan_save_stack+0x1b/0x40
 kasan_set_track+0x1c/0x30
 kasan_set_free_info+0x20/0x30
 __kasan_slab_free+0x109/0x140
 kfree+0x117/0x4c0
 rsi_91x_init+0x741/0x8a0 [rsi_91x]
 rsi_probe+0x9f/0x1750 [rsi_usb]

Stop thread before free 'common' and 'adapter' to fix it.

Fixes: 2108df3c4b18 ("rsi: add coex support")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211015040335.1021546-1-william.xuanziyang@huawei.com

mt76: mt7915: change max rx len limit of hw modules

Update max rx len of some hw modules, which aligns out vendor SDK.
In normal modes, we exchange MPDU 7991 cap with peers; however, this
won't play a part in sniffer mode.
To prevent packets which exceed the max MPDU size from entering specific
rx path in hw, we need to set a proper limit to filter them out.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix missing HE phy cap

Fix missing HE phy cap related to vif and starec setting.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: rework mt7915_mcu_sta_muru_tlv()

Re-order and modify conditions for MU DL/UL and ofdma DL fields, and
also clean up some unnecessary zero settings.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: enable HE UL MU-MIMO

Enable HE UL MU-MIMO in sta_rec_muru, which works on both ap and station
mode.

For sending trigger frames, one of the conditions fw uses is to check if
mib rx airtime meets the threshold.
There's a main control of mib rx airtime report register in fw, so we
need to enable the register by mcu cmd instead of directly writing it,
otherwise it will still be disabled by fw.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: add per-vif counters in ethtool

Similar to mt7915 driver, add per-vif tx counters in ethtool.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: move tx amsdu stats in mib_stats

Move tx_amsdu histogram stats in mib_stats structure since registers are
clear-on-read

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: add sta stats accounting in mt7921_mac_add_txs_skb

This is a preliminary patch to add ethtool stats to mt7921 driver.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: introduce stats reporting through ethtool

Similar to mt7915 driver, add tx/rx statistics reporting through ethtool.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: add some more MIB counters

This is a preliminary patch to introduce ethtool stats support to mt7921
driver.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: do not reset MIB counters in get_stats callback

MIB counters are used for ethtool stats as well

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: move tx amsdu stats in mib_stats

Move tx_amsdu histogram stats in mib_stats structure since registers are
clear-on-read

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: run mt7915_get_et_stats holding mt76 mutex

Since it can run in parallel with mac_work, hold mutex lock in
mt7915_get_et_stats. Moreover update mib counters running
mt7915_get_et_stats.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move mt76_ethtool_worker_info in mt76 module

Move mt76_ethtool_worker_info in common code in order to be reused in
mt7921 driver.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: move mt76_sta_stats in mt76.h

This is a preliminary patch to add ethtool stats to mt7921 driver.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x0: correct VHT MCS 8/9 tx power eeprom offset

Appears to have incorrectly offset 0x120 + 0x12 instead of 12 decimal,
leading to bogus power values being used.

Signed-off-by: Richard Huynh <voxlympha@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921s: add reset support

Introduce wifi chip reset support for mt7921 device to recover
mcu hangs or abnormal wifi system.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: introduce mt7921s support

Introduce support for mt7921s 802.11ax (Wi-Fi 6) 2x2:2SS chipset.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: refactor mt7921_mcu_send_message

This is a preliminary patch to introduce mt7921s support.

Refactor mt7921_mcu_send_message to be sharable between mt7921s and
mt7921e.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: rely on mcu_get_nic_capability

Rely on mcu_get_nic_capability to obtain Tx quota information
for the SDIO device, get PHY capability, MAC address and then we can
totally drop mt7921/eeprom.c and any unnecessary code.

Noting that mt76_connac_mcu_get_nic_capability should be run before set
flag MT76_STATE_MCU_RUNNING being set to setup the proper parameters
like Tx quota control before the device is started to running.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: connac: extend mcu_get_nic_capability

Extend mcu_get_nic_capability to obtain tx resource for SDIO device,
MAC address, and PHY capability.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: sdio: extend sdio module to support CONNAC2

Extend sdio module to support CONNAC2 hw that mt7921s rely on.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: sdio: introduce parse_irq callback

Add parse_irq to handle that interrupt status structure is
different between mt7663s and mt7921s.

This is a preliminary patch to introduce mt7921s driver

Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: sdio: move common code in mt76_sdio module

Move sdio common code in mt76_sdio module.
This is a preliminary patch to support mt7921s devices.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: use physical addr to unify register access

Use physical address to unify the register access and reorder the
entries in fixed_map table to accelerate the address lookup for
MT7921e. Cosmetics the patch with adding an extra space to make all
entries in the array style consistent.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: make all event parser reusable between mt7921s and mt7921e

The longer event such as the event for mcu_get_nic_capability would hold
the data in paged fragment skb for the SDIO device so we turn the skb to
be linearized skb before accessing it to reuse the same event parser
betweem mt7921s and mt7921e.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: rely on mcu reg access utility

rely on mcu reg access utility and drop the duplicated code.

Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: connac: move mcu reg access utility routines in mt76_connac_lib module

Move mcu reg access shared between mt7663s and mt7921s in mt76_connac_lib
module.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: add MT7921_COMMON module

This is a preliminary patch to introduce mt7921s support.

MT7921_COMMON module grouping bus independent objects the both mt7921e and
mt7921s can share with and have to rely on.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: refactor init.c to be bus independent

This is a preliminary patch to introduce mt7921s support.

Make init.c reusable between mt7921s and mt7921e

Tested-by: Deren Wu <deren.wu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: refactor mcu.c to be bus independent

This is a preliminary patch to introduce mt7921s support.

Make mcu.c reusable between mt7921s and mt7921e

Tested-by: Deren Wu <deren.wu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: refactor dma.c to be pcie specific

This is a preliminary patch to introduce mt7921s support.

make dma.c be used dedicately for mt7921e.

by moving out mt7921_tx_cleanup from dma.c to mcu.c and then renaming
mt7921_tx_cleanup to refect the exact thing the function actually does.

Finally, dma.c totally become pcie specific one, only needed to
be compiled only when CONFIG_MT7921E is enabled.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: refactor mac.c to be bus independent

This is a preliminary patch to introduce mt7921s support.

Split out a new pci_mac.c from mac.c to make mac.c reusable between
mt7921s and mt7921e.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: add MU EDCA cmd support

Add MU EDCA MCU command support to update MU AC parameter record field
from the access point.

Co-developed-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com>
Signed-off-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com>
Tested-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: remove dead code in debugfs code

Remove some more not used code in mt7915 debugfs.
Squash mt7915_puts_rate_txpower and mt7915_rate_txpower_show.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: sdio: export mt76s_alloc_rx_queue and mt76s_alloc_tx routines

Export mt76s_alloc_rx_queue and mt76s_alloc_tx utility routines in order
to allow mt7921s driver to configure a different main rx queue.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: improve code readability for xmit-queue handler

Improve xmit-queue debugfs node readability for mt7915

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: introduce mt76 debugfs sub-dir for ext-phy

Introduce a dedicated mt76 debugfs sub-dir for ext-phy in dbdc mode.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: rely on phy pointer in mt76_register_debugfs_fops routine signature

This is a preliminary patch to create a mt76 debugfs subir for ext-phy.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: set muru platform type

Set muru platform type by mcu cmd to notify fw to init corresponding
algorithm.

Suggested-by: Money Wang <money.wang@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: set VTA bit in tx descriptor

The VTA (Valid for Txd Arrival time) bit should be set in tx descriptor,
which is necessary for WM fw to schedule SPL (station priority list)
normally before generating txcmd.
If it's not set, some unexpected wcids may be involved in SPL.

Suggested-by: Nelson Chang <nelson.chang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix muar_idx in mt7915_mcu_alloc_sta_req()

For broadcast/multicast wcid, the muar_idx should be 0xe.

Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: rework starec TLV tags

Rework starec tags to the order which firmware expected. This also fixes
some weird behaviors during generating SPL of HE-MU.

Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix sta_rec_wtbl tag len

Fix tag len error for sta_rec_wtbl, which causes fw parsing error for
the tags placed behind it.

Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: improve starec readability of txbf

1. Drop unnecessary MT_EBF/MT_IBF enum.
2. Rename fields 'nc'/'nr' to 'ncol'/'nrow'.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix txbf starec TLV issues

With this patch we can append txbf starec TLVs. This is an intermediate
patch to improve HE MUMIMO performances.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: introduce mt7915_mcu_beacon_check_caps()

Beacon elements might be changed by hostapd configuraion, so driver
should compare both IEs and PHY capabilities to get the least common
denominator before association.

Co-developed-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: connac: fix possible NULL pointer dereference in mt76_connac_get_phy_mode_v2

Fix the following NULL pointer dereference in mt76_connac_get_phy_mode_v2
routine triggered on mt7663s device when sta is NULL

[    5.490700] mt7663s mmc0:0001:1: N9 Firmware Version: 3.1.1, Build Time: 20200604161656
[    5.490815] mt7663s mmc0:0001:1: Region number: 0x4
[    5.490868] mt7663s mmc0:0001:1: Parsing tailer Region: 0
[    5.496251] mt7663s mmc0:0001:1: Region 0, override_addr = 0x00118000
[    5.496419] mt7663s mmc0:0001:1: Parsing tailer Region: 1
[    5.624027] mt7663s mmc0:0001:1: Parsing tailer Region: 2
[    5.656999] mt7663s mmc0:0001:1: Parsing tailer Region: 3
[    5.671876] mt7663s mmc0:0001:1: override_addr = 0x00118000, option = 3
[    9.358658] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    9.358775] #PF: supervisor read access in kernel mode
[    9.358831] #PF: error_code(0x0000) - not-present page
[    9.358886] PGD 0 P4D 0
[    9.358917] Oops: 0000 [#1] SMP
[    9.358960] CPU: 0 PID: 235 Comm: NetworkManager Not tainted 5.15.0-rc4-kvm-02151-g39e333d657f4-dirty #769
[    9.359057] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014
[    9.359150] RIP: 0010:mt76_connac_get_phy_mode_v2+0xc9/0x11c
[    9.359473] RAX: 0000000000000013 RBX: 0000000000000000 RCX: 0000000000000027
[    9.359546] RDX: ffff8881f9c17358 RSI: 0000000000000001 RDI: ffff8881f9c17350
[    9.359624] RBP: ffff88810bac1ed4 R08: ffffffff822a4a48 R09: 0000000000000003
[    9.359697] R10: ffffffff82234a60 R11: ffffffff82234a60 R12: ffff88810bac1eec
[    9.359779] R13: 0000000000000000 R14: ffff88810bad1648 R15: ffff88810bac1eb8
[    9.359859] FS:  00007f5f1e45bbc0(0000) GS:ffff8881f9c00000(0000) knlGS:0000000000000000
[    9.359939] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    9.360003] CR2: 0000000000000000 CR3: 0000000105d5d000 CR4: 00000000000006b0
[    9.360083] Call Trace:
[    9.360116]  mt76_connac_mcu_uni_add_bss.cold+0x21/0x250
[    9.360175]  ? schedule_preempt_disabled+0xa/0x10
[    9.360232]  ? __mutex_lock.constprop.0+0x2ab/0x460
[    9.360286]  mt7615_remove_interface+0x63/0x1d0
[    9.360342]  drv_remove_interface+0x32/0xe0
[    9.360385]  ieee80211_do_stop+0x5da/0x800
[    9.360428]  ? dev_reset_queue+0x30/0x90
[    9.360472]  ieee80211_stop+0x3b/0xb0
[    9.360516]  __dev_close_many+0x7a/0xd0
[    9.360559]  __dev_change_flags+0xd6/0x1f0
[    9.360604]  dev_change_flags+0x21/0x60
[    9.360648]  do_setlink+0x259/0xfb0
[    9.360686]  ? __nla_validate_parse+0x51/0xb80
[    9.360742]  __rtnl_newlink+0x5b3/0x960
[    9.360785]  ? inet6_fill_ifla6_attrs+0x41d/0x470
[    9.360841]  ? __kmalloc_track_caller+0x57/0x3c0
[    9.360905]  ? netlink_trim+0x8a/0xb0
[    9.360949]  ? skb_queue_tail+0x1b/0x50

Fixes: 67aa27431c7f8 ("mt76: mt7921: rely on mt76_connac_mcu common library")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: do not access 802.11 header in ccmp check for 802.3 rx skbs

Avoids false positive on detecting frags or encrypted mgmt frames

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: use a separate CCMP PN receive counter for management frames

When received frame is decryped by hardware, CCMP PN is checked by
mt76.

When management frame protection (IEEE 802.11w) is used, we must use
a separate counter for tracking received CCMP packet number for the
management frames. The previously used counter was shared with data
frames and that can cause problems in detecting replays incorrectly
for robust management frames.

Add a new counter just for robust management frames to avoid this
issue.

Signed-off-by: Xing Song <xing.song@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: add delay config for sched scan

Add a delay parameter for firmware to support delay scheduled scan.

Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix monitor mode tear down crash

[  103.451600] CPU 3 Unable to handle kernel paging request at virtual address 00000003, epc == 8576591c, ra == 857659f0
[  103.462226] Oops[#1]:
[  103.464499] CPU: 3 PID: 9247 Comm: ifconfig Tainted: G        W         5.4.143 #0
[  103.472031] $ 0   : 00000000 00000001 83be3854 00000000
[  103.477239] $ 4   : 8102a374 8102a374 8102f0b0 00000200
[  103.482444] $ 8   : 0000002d 000001e4 64373765 5d206337
[  103.487647] $12   : 00000000 00000005 00000000 0006d1df
[  103.492853] $16   : 83be3848 853838a8 8743d600 00010000
[  103.498059] $20   : 00000000 00000000 8553dec0 0000007f
[  103.503266] $24   : 00000003 80382084
[  103.508472] $28   : 831d4000 831d5bc0 00000001 857659f0
[  103.513678] Hi    : 00000122
[  103.516543] Lo    : d1768000
[  103.519452] epc   : 8576591c mt7615_mcu_add_bss+0xd0/0x3c0 [mt7615_common]
[  103.526306] ra    : 857659f0 mt7615_mcu_add_bss+0x1a4/0x3c0 [mt7615_common]
[  103.533232] Status: 11007c03 KERNEL EXL IE
[  103.537402] Cause : 40800008 (ExcCode 02)
[  103.541389] BadVA : 00000003
[  103.544253] PrId  : 0001992f (MIPS 1004Kc)
[  103.797086] Call Trace:
[  103.799562] [<8576591c>] mt7615_mcu_add_bss+0xd0/0x3c0 [mt7615_common]
[  103.806082] [<85760a14>] mt7615_remove_interface+0x74/0x1e0 [mt7615_common]
[  103.813280] [<85603fcc>] drv_remove_interface+0x2c/0xa0 [mac80211]
[  103.819612] [<8561a8e4>] ieee80211_del_virtual_monitor.part.22+0x74/0xe8 [mac80211]
[  103.827410] [<8561b7f0>] ieee80211_do_stop+0x4a4/0x8a0 [mac80211]
[  103.833671] [<8561bc00>] ieee80211_stop+0x14/0x24 [mac80211]
[  103.839405] [<8045a328>] __dev_close_many+0x9c/0x10c
[  103.844364] [<80463de4>] __dev_change_flags+0x16c/0x1e4
[  103.849569] [<80463e84>] dev_change_flags+0x28/0x70
[  103.854440] [<80521e54>] devinet_ioctl+0x280/0x774
[  103.859222] [<80526248>] inet_ioctl+0xa4/0x1c8
[  103.863674] [<80436830>] sock_ioctl+0x2d8/0x4bc
[  103.868201] [<801adbb4>] do_vfs_ioctl+0xb8/0x7c0
[  103.872804] [<801ae30c>] ksys_ioctl+0x50/0xb4
[  103.877156] [<80014598>] syscall_common+0x34/0x58

Fixes: 04b8e65922f63 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: debugfs: improve queue node readability

Improve {xmit,rx}-queue debugfs node readability

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add twt_stats knob in debugfs

Introduce twt_stats knob in debugfs in order to dump established
agreements

Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: enable twt responder capability

Enable TWT support in AP mode

Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: introduce mt7915_mac_add_twt_setup routine

Introduce individual TWT support to mt7915 in AP mode.
Implement the two following mac80211 callbacks:
- add_twt_setup
- twt_teardown_request

Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: introduce mt7915_mcu_twt_agrt_update mcu command

This is a preliminary patch to add TWT support to mt7915

Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: introduce __mt7915_get_tsf routine

Introduce an unlocked verion of mt7915_get_tsf routine.
This is a preliminary patch to add TWT support to mt7915.

Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: drop MCU header size from buffer size in __mt76_mcu_send_firmware

Each firmware piece with mt7915 and mt7921 do not have the MCU header to
reroute the packet to the internal RAM. So we do not need to consider the
MCU header size in __mt76_mcu_send_firmware.
Move the MCU header overhead calculation to mt76_mcu_send_firmware (for
older chipsets)

Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Fixes: 1c099ab44727 ("mt76: mt7921: add MCU support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: introduce __mt76_mcu_send_firmware routine

Introduce __mt76_mcu_send_firmware routine to specify mcu message max
length. This is a preliminary patch to support mt7921s driver.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

dt: bindings: net: mt76: add eeprom-data property

EEPROM data for mt76 can be embedded into device-tree as an array.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: support reading EEPROM data embedded in fdt

Some platforms boot from SD card and don't come with calibration data
stored anywhere on the board.
As EEPROM data is rather small it can be embedded into the device tree
to be loaded from there by the mt76.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: schedule status timeout at dma completion

Reduce MT_TX_STATUS_SKB_TIMEOUT to 250ms

Tested-by: mrkiko.rs@gmail.com
Co-developed-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: substitute sk_buff_head status_list with spinlock_t status_lock

Substitute sk_buff_head status_list with spinlock_t status_lock since we
just need it for locking

Tested-by: mrkiko.rs@gmail.com
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: remove mt76_wcid pointer from mt76_tx_status_check signature

Remove mt76_wcid pointer from mt76_tx_status_check signature since it is
always set to NULL

Tested-by: mrkiko.rs@gmail.com
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: introduce packet_id idr

Introduce per-wcid idr to manage packet id for txs. This allow fast idr
lookup and skb queueing at the same time.

Tested-by: mrkiko.rs@gmail.com
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: add 6GHz support

Unlock 6GHz band if supported by the device. Configure HE 6G
capabilities.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: add 6GHz support

Introduce 6GHz channel list in mt76 module. This is a preliminary patch
to unlock 6GHz band for mt7921 devices.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: connac: enable hw amsdu @ 6GHz

This is a preliminary patch to enable 6GHz band for mt7921 devices.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: connac: add 6GHz support to mt76_connac_mcu_uni_add_bss

This is a preliminary patch to enable 6GHz band for mt7921 devices.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: connac: add 6GHz support to mt76_connac_mcu_sta_tlv

Introduce sta_rec_he_6g_capa tlv in order configure the mcu with 6GHz
capabilities. This is a preliminary patch to enable 6GHz band for
mt7921 devices.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>