Staging: batman-adv: Fixes rounding issues in vis.c

This patches fixes two rounding issues in vis.c for sending and
purging vis packets. Before, the timers and timeouts always got
rounded down to seconds, though we want a precision in
milliseconds.

This also fixes a kernel panic that occures when lowering the
timer for sending vis packets (vis_interval) to less than 1000ms
in main.c manually.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Use forw_bcast_list_lock always with disabled interrupts

forw_bcast_list_lock is spin_locked in both process and softirq context.
SoftIRQ calls the spinlock with disabled IRQ and normal process context
with enabled IRQs.

When process context is inside an spin_locked area protected by
forw_bcast_list_lock and gets interrupted by an IRQ, it could happen
that something tries to lock forw_bcast_list_lock again in SoftIRQ
context. It cannot proceed further since the lock is already taken
somewhere else, but no reschedule will happen inside the SoftIRQ
context. This leads to an complete kernel hang without any chance of
resurrection.

All functions called in process context must disable IRQs when they try
to get get that lock to to prevent any reschedule due to IRQs.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: consistent spelling of "neighbors"

we have written "neighbors", "neighbours" and bad spelled versions of this
word, this patch should make it consistent.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: initialize static hash iterators

instead of dynamically registering hash iterators, calling functions are
changed to register the iterator objects statically. The two advantages are:

 * no memory leaks when aborting from hash_iterate()
 * no calls to kmalloc/kfree, therefore a little faster/safer

Tested with 9 QEMU instances, no obvious regression found.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Replace KERN_DEBUG with bat_dbg

Ameya Palande requested we replace printk(KERN_DEBUG "") by pr_debug()
I decided it was better to use our debug macro.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: update README for latest kernel

state in the README that we also (compile) support 2.6.32

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Remove NULL pointer check

It is safe to call kfree(NULL) which makes this extra check unneeded. It
was found using checkpatch.pl from linux-2.6

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: test off by one in RtmpAsicSendCommandToMcu()

`i' reaches 101 after the loop, so if it was 100 then it succeeded in
the last iteration. This is probably unlikely to cause problems.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192u: ieee80211: add missing parentheses

not(!) has a higher precedence than bit and(&).

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: add Broadcom Crystal HD driver

This patch supersedes the earlier ones sent by Manu Abraham to add
the Broadcom Crystal HD driver to the staging tree, per discussion
with him about it. I've been working with Broadcom's Naren Sankar
on this driver for a number of months, and had already talked Naren
about submitting this on Broadcom's behalf, didn't expect anyone
else to jump on submitting it as quickly as Manu did. ;)

This version is a one-shot deal, incorporating the original driver,
Manu's coding style clean-ups, udev device creation support from
Edgar 'gimli' Hucek, and a number of other small tweaks from myself
and Scott Davilla, the other individual who has been working closely
on this code with Naren and I.

I've tested this iteration of the code lightly on a mini pci-e board
in a ThinkPad T61p running x86_64 Fedora 12, with the expected results,
and will test further on other systems with other variants of the card
(I have three varieties of this device currently in hand). Scott has
also tested on assorted primarily i686 varieties of Ubuntu, and Naren
has tested with both Fedora and Ubuntu, iirc.

Note: only the 70012 is currently supported by this driver, 70015
support will follow later. Also note that Blu-Ray support isn't
enabled (at the firmware level), due to misc fun related to the
BD encryption scheme, DRM, etc. :\

I *do* have a git tree containing the driver, lib, gst plugin and
firmware that I'm working from at the moment[*], as there are inter-
dependencies between the driver and lib, and the driver can be used
with kernels going a ways back (I've only tested back to 2.6.18 as
it exists in Red Hat Enterprise Linux 5). I'm exporting from there,
into a linux-next tree, then generating patches from there. The goal
is to feed everything upstream as quickly as possible, but there are
users who want this code for earlier kernels too...

The firmware will be submitted for inclusion in dwmw2's linux-firmware
tree once there is a suitable redistribution-no-modification type of
license on it (I believe Naren is working with Broadcom legal to get
that in place).

Changelog from initial Broadcom release to here:

commit d20475d444610c5683d09e63f707f5bb22359062
Author: Jarod Wilson <jarod@redhat.com>
Date:   Mon Jan 4 13:55:16 2010 -0500

    include: lib doesn't build w/o the removed stdint include

    So add it back...

Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit c181070a330530b792d2b80e3ec6ab12a5a57394
Author: Scott Davilla <davilla@4pi.com>
Date:   Mon Jan 4 13:38:37 2010 -0500

    include: don't define VOID if its already defined

Signed-off-by: Scott Davilla <davilla@4pi.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit 33d8a2b691e81212e398f53770578d79650bf0bc
Author: Jarod Wilson <jarod@redhat.com>
Date:   Mon Jan 4 13:12:10 2010 -0500

    driver: create crystalhd device using udev

    Based on:
    http://sourceforge.net/apps/trac/archvdr/browser/trunk/archvdr/crystalhd/use_udev.patch

Signed-off-by: Edgar ( gimli ) Hucek <ebsi4711 at gmail dot com>
    Formatting tweaks, error-handling path fixups and any bugs added by Jarod.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit c44c64dea5537814796fcbe2d9db0209383c78b9
Author: Manu Abraham <abraham.manu@gmail.com>
Date:   Mon Jan 4 10:32:47 2010 -0500

    crystalhd: coding style cleanups

Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit cffa6da7467ff697a656d1dfff54bb0513a053dc
Author: Jarod Wilson <jarod@redhat.com>
Date:   Mon Jan 4 10:17:27 2010 -0500

    crystalhd: run dos2unix over everything, this is linux source...

Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit 7fa38a282db7af5a5746055f7c6cef8a9b8ee138
Author: Jarod Wilson <jarod@redhat.com>
Date:   Mon Jan 4 10:02:33 2010 -0500

    crystalhd: initial import of released Broadcom code

    Straight import of:
    http://www.broadcom.com/docs/support/crystalhd/crystalhd_linux_20091229.zip

    Unfortunately, we're unable to publicly publish all the history that got
    us from the initial internal code to what was released here, but such is
    life, we can just be happy we've got this open-sourced now. :)

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Naren Sankar <nsankar@broadcom.com>
Signed-off-by: Scott Davilla <davilla@4pi.com>
Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: altpciechdma: remove driver

No one seems to be able to maintain this, or merge it into mainline, so
remove it.

Acked-by: Leon Woestenberg <leon@sidebranch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: p9auth: remove driver from tree

No one seems to be maintaining this anymore, and it is not on any
track to be merged to mainline.

Cc: Ashwin Ganti <ashwin.ganti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: remove the b3dfg driver

It has no users, and no developers to maintain it to get
it merged into mainline.

So sad.

Cc: Daniel Drake <ddrake@brontes3d.com>
Cc: Justin Bronder <jsbronder@brontes3d.com>
Cc: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dt3155: coding style cleanups for the .h files

This cleans up some of the coding style issues in the .h files.

More remains to be done.

Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dt3155: coding style cleanups for allocator code

This fixes up the worst of the coding style errors for the
allocator code.

Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: initialise mibitem

$ gcc --version

gcc (Debian 4.4.2-5) 4.4.2
Copyright (C) 2009 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

$ make
...
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_dorequest’:
drivers/staging/wlan-ng/p80211wext.c:139: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:139: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwretry’:
drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:967: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwretry’:
drivers/staging/wlan-ng/p80211wext.c:1057: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1057: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwtxpow’:
drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1149: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwtxpow’:
drivers/staging/wlan-ng/p80211wext.c:1123: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:1123: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwfrag’:
drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:891: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwfrag’:
drivers/staging/wlan-ng/p80211wext.c:933: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:933: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwrts’:
drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:826: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwrts’:
drivers/staging/wlan-ng/p80211wext.c:866: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:866: warning: ‘mibitem.status’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwrate’:
drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:775: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_giwfreq’:
drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.len’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.status’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:273: warning: ‘mibitem.data’ is used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwfreq’:
drivers/staging/wlan-ng/p80211wext.c:320: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c: In function ‘p80211wext_siwmode’:
drivers/staging/wlan-ng/p80211wext.c:401: warning: ‘mibitem.len’ may be used uninitialized in this function
drivers/staging/wlan-ng/p80211wext.c:401: warning: ‘mibitem.status’ may be used uninitialized in this function
...

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: prism2-usb: Build should select WIRELESS_EXT

The prevailing idiom is to select WIRELESS_EXT not depend on it.

Depending leaves this driver in a situation where it can only
be built if another driver that selects WIRELESS_EXT has been enabled.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: Use z format qualifier for output of sizeof()

$ gcc --version
gcc (Debian 4.4.2-5) 4.4.2
Copyright (C) 2009 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

$ make
...
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_ADDBAReq’:
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:342: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_ADDBARsp’:
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:443: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c: In function ‘ieee80211_rx_DELBA’:
drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c:573: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘unsigned int’
...

Also some style fixes for these lines:
+ Fix excessively long lines
+ Remove leading space before struct
+ Remove unnecessary parentheses

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: Build should select WIRELESS_EXT

The prevailing idiom is to select WIRELESS_EXT not depend on it.

Depending leaves this driver in a situation where it can only
be built if another driver that selects WIRELESS_EXT has been enabled.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: s5k3e2fx.c: simplify complexity by factoring

the code was looping, setting s_move[i] to the following calculations

if (actual_step>= 0)
         s_move[i] = ((((i + 1) * gain + 0x200) - (i * gain + 0x200)) / 0x400);
else
         s_move[i] = ((((i + 1) * gain - 0x200) - (i * gain - 0x200)) / 0x400);

but, this code reduces to the expression
s_move[i] = gain>>  10;

The reason for the complexity was to generate a step function with
integer division and rounding to land on specific values. But these calculations
can be simplified to the following code:

gain = ((actual_step<<  10) / 5)>>  10;
for (i = 0; i<= 4; i++)
s_move[i] = gain;

Signed-off-by: Justin Madru<jdm64@gawab.com>
Reviewed-by: Ray Lee<ray-lk@madrabbit.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Remove unused typedefs MLME_DEAUTHREQ_PARA and MLME_DISASSOCREQ_PARA

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Remove unused typedef RXLAYER1

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Remove unused typedef TXRETRY_REC

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Remove unused typedef CHAN_LIST

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Convert typedef ChanInfo to struct chan_info

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Remove unused typedef _EVENTLOG

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Convert typedef RadioOff to struct radio_off

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Convert typedef LOCAL_PARA to struct wb_local_para

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Fix misspelling of "invocation" in comment.

A comment misspells "invocation"; this fixes it. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Fix misspelling of "should" and "shouldn't" in comments.

Some comments misspell "should" or "shouldn't"; this fixes them. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Fix misspelling of "successful" and variants.

Some comments and one message misspell "successful" or variants of
the word; this fixes them. No change in functionality.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: udlfb: add dynamic modeset support

Add dynamic modeset support

udlfb uses EDID to find the monitor’s preferred mode
udlfb no longer has fixed mode tables – it’s able to set any mode
dynamically, from the standard VESA timing characteristics of the monitor.

Draws from probe and setmode code of both displaylink-mod 0.3 branch of
Roberto De Ioris, and Jaya Kumar's displaylinkfb.
Lays foundation for defio support and making backbuffer optional.
With additional changes to minimize diffs and clean for checkpatch.pl style.

Does not yet include new ioctls or refcount/mutex code from displaylink-mod.

Tested to work with existing xf-video-displaylink X server unmodified.

Signed-off-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dt3155: add it to the build

Now it will build with the rest of the kernel

Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dt3155: add TODO file

Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dt3155: add needed #include

This is needed so the code properly builds

Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add dt3155 driver

This is a driver for the DT3155 Digitizer

Signed-off-by: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Small code fixes for r819xE_firmware.c

Signed-off-by: Radu Voicilas <rvoicilas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Code style fixes for r819xE_phy.h

Signed-off-by: Radu Voicilas <rvoicilas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Code style fix for r819xE_phyreg.h

Changed all the comments to conform to the standard, aligned register values.

Signed-off-by: Radu Voicilas <rvoicilas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: fix more coding style issues.

Fixes to the way code looks.

Signed-off-by: Radu Voicilas <rvoicilas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl9192e: fix power usage issues

This patch should allow the driver to consume a lot less power.

Signed-off-by: david woo <xinhua_wu@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: fix some codingstyle issues

dot11d.h needed a good refactoring - I've dropped some of the //
comments or transformed them to match the kernel documentation.
r8180_93cx6.h - fixed a little bit the copyright section.

Signed-off-by: Radu Voicilas <rvoicilas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: ramzswap: remove unused #include <linux/version.h>

Remove unused #include <linux/version.h>('s) in
  drivers/staging/ramzswap/ramzswap_drv.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlags49_h2: remove duplicated #include

Remove duplicated #include('s) in
  drivers/staging/wlags49_h2/wl_pci.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: checkinclude.pl fix

Remove <linux/device.h> which is included twice

Signed-off-by: Ameya Palande <2ameya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Fix the naming of the debug option.

So that the configuration hierarchy is correct, set the debug option
to have the same base as the main BATMAN option.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Split originator handling parts out of routing.c

Bug found and fixed in origional version by Linus Luessing.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Always receive when discarding.

It does not matter if the interface is to be activated or not, we must
read the packet in order that it be discarded.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: stop persistent warnings if a device is deactivated.

Without this change we spam the kernel log on every packet received on
any other interface when an interface has been added, but is not yet
active, ie UP.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Refactor routing.c

Break up a lot of the big functions up into many smaller ones. This
helps with readability and there is now a lot less code squashed
against the right hand margin.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Simon Wunderlich <simon.wunderlich@s2003.tu-chemnitz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: replace internal logging mechanism.

batman-adv used its own logging infrastructure. Replace this with
standard kernel logging, printk(), with compile time and runtime
options to enable/disable different debug levels.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: asus_oled: Add defines for asus vendor_id and device_id to be consistent with hid-ids.h

This almost trivial patch replaces the hardcoded values for the vendor and
device ids with defines, as they are used in drivers/hid/hid-ids.h

For me this seems to be more consistent, however as drivers/hid/hid-ids.h
is not within the default include directory I had to redefine the defines here
(maybe move the hid-ids.h to include/linux ?)

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: mimio: checkpatch.pl line > 80 chars fixes

Rearrange code and cleanup the information to get rid of checkpatch.pl
line > 80 chars complaints.

Signed-off-by: Ameya Palande <2ameya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: mimio: Remove dead code

Signed-off-by: Ameya Palande <2ameya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: mimio: Fix checkpatch.pl spacing errors

Signed-off-by: Ameya Palande <2ameya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187x: Use %pM for mac address output

Uncompiled.  Doesn't currently build anyway.

Converted MAC_FMT to %pM
Converted some %02x%02x%02x%02x%02x%02x to %pm
Converted MAC_ARG to direct use
Removed MAC_FMT and MAC_ARG macros

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: slicoss Use pci_set_consistent_dma_mask.

Use pci_set_consistent_dma_mask() in the case of 64-bit consistent allocations.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: slicoss Use compare_ether_addr.

Use compare_ether_addr.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: slicoss Use PCI_DEVICE_TABLE.

Use PCI_DEVICE_TABLE: defines array as const and puts
it into the __devinitconst section.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: slicoss Use dev->stats rather than adapter->stats.

Use dev->stats rather than adapter->stats.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: slicoss No need to check pointer in debugfs_remove()

No need to check pointer expicitly since it has been done in debugfs_remove()

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: slicoss No need type casting when using netdev_priv

No need type casting when using netdev_priv.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: slicoss Check for valid hw address

Check for valid hw address.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: slicoss Convert to netdev_tx_t

Convert to netdev_tx_t.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: Allow drivers to co-exist

Unable to build both drivers at the same time due to classing variables that should be declared static but aren't.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: Remove old structures for implemented features

Functionality for master RMW and location monitors has been implemented.
Remove the commented out structures from the original codebase.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: Fix checkpatch errors on VME core.

Running checkpatch on the core VME code highlights many errors. Fix them.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: Allow override of geographical address on ca91c142

Geographical addressing only works if the VME backplane supports it. There
are a large number of old backplanes which do not support geographical
addressing. These boards will generally report a slot ID of zero - which is
an invalid ID in the slot numbering scheme.

Allow the geographical address to be over-ridden on the ca91c142 so that a
slot ID can be provided manually in these circumstances.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: Allow override of geographical address on tsi148

Geographical addressing only works if the VME backplane supports it. There
are a large number of old backplanes which do not support geographical
addressing. These boards will generally report a slot ID of zero - which is
an invalid ID in the slot numbering scheme.

Allow the geographical address to be over-ridden on the tsi148 so that a
slot ID can be provided manually in these circumstances.

Signed-off-by: Markus Kraemer <mkraemer@e18.physik.tu-muenchen.de>
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: Correct vme_user error message typo

Correction of erroneous error message in vme_user.c.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: Fix branch in zfProtRspSim()

This semicolon is misplaced.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: fix some sparse warnings

*apdbg.c: use NULL pointer instead of 0 interger. Also make two functions private.

Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: remove duplicated #include

Remove duplicated #include('s) in
  drivers/staging/dream/smd/smd_rpcrouter.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: fix memory leak in camera error path

cppcheck found that ctrl_pmsm is leaked if the open operation fails.

Signed-off-by: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: add missing include files

Add missing files/includes neccessary for Dream compilation. Mark
flash support as broken -- it is not present on released Dream, anyway.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: pcmad: [PATCH 3/3] cleanup printk() warnings

cleanup printk() warnings for including the facility level.
cleanup add a printk("\n") to terminate the print for the non-error case.

Signed-off-by: Bruce Beare <bbeare1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: pcmad: Cleanup: Remove unneeded braces

Signed-off-by: Bruce Beare <bbeare1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: pcmad: Cleanup: code indent warning messages

use tabs instead of leading spaces

Signed-off-by: Bruce Beare <bbeare1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Linux 2.6.33

Merge branch 'urgent' of git://git./linux/kernel/git/kyle/parisc-2.6

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc: Set PCI CLS early in boot.

Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix broken sn2 build

parisc: Set PCI CLS early in boot.

Set the PCI CLS early in the boot process to prevent
device failures. In pcibios_set_master use the new
pci_cache_line_size instead of a hard-coded value.

Signed-off-by: Carlos O'Donell <carlos@codesourcery.com>
Reviewed-by: Grant Grundler <grundler@google.com>
Signed-off-by: Kyle McMartin <kyle@redhat.com>

Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix out_le32() macro
  microblaze: Fix cache loop function for cache range

Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Revert "block: improve queue_should_plug() by looking at IO depths"

microblaze: Fix out_le32() macro

Trailing semicolon causes compilation involving out_le32() to fail.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: Fix cache loop function for cache range

I create wrong asm code but none test shows that this part of code is wrong.
I am not convinces that were good idea to create asm optimized macros
for caches. The reason is that there is not optimization with previous code
that's why make sense to add old code and do some benchmarking which
functions are faster.

Signed-off-by: Michal Simek <monstr@monstr.eu>

Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net: bug fix for vlan + gro issue
  tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ON
  cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit)
  IPv6: better document max_addresses parameter
  MAINTAINERS: update mv643xx_eth maintenance status
  e1000: Fix DMA mapping error handling on RX
  iwlwifi: sanity check before counting number of tfds can be free
  iwlwifi: error checking for number of tfds in queue
  iwlwifi: set HT flags after channel in rxon

net: bug fix for vlan + gro issue

Traffic (tcp) doesnot start on a vlan interface when gro is enabled.
Even the tcp handshake was not taking place.
This is because, the eth_type_trans call before the netif_receive_skb
in napi_gro_finish() resets the skb->dev to napi->dev from the previously
set vlan netdev interface. This causes the ip_route_input to drop the
incoming packet considering it as a packet coming from a martian source.

I could repro this on 2.6.32.7 (stable) and 2.6.33-rc7.
With this fix, the traffic starts and the test runs fine on both vlan
and non-vlan interfaces.

CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: Be in TS_POLLING state during mwait based C-state entry
  ACPI: Fix regression where _PPC is not read at boot even when ignore_ppc=0
  acer-wmi: Respect current backlight level when loading

Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/vmwgfx: Fix queries if no dma buffer thrashing is occuring.
  drm/nv50: fix vram ptes on IGPs to point at stolen system memory
  drm/nv50: fix instmem binding on IGPs to point at stolen system memory
  drm/nv50: improve vram page table construction
  drm/nv50: more efficient clearing of gpu page table entries
  drm/nv50: make nv50_mem_vm_{bind,unbind} operate only on vram
  drm/nouveau: Fix up pre-nv17 analog load detection.

[IA64] Fix broken sn2 build

Revert the change made to arch/ia64/sn/kernel/setup.c by commit
204fba4aa303ea4a7bb726a539bf4a5b9e3203d0 as it breaks the build.

Fixing the build the b94b08081fcecf83fa690d6c5664f6316fe72208 way
breaks xpc because genksyms then fails to generate an CRC for
per_cpu____sn_cnodeid_to_nasid because of limitations in the
generic genksyms code.

Signed-off-by: Hedi Berriche <hedi@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ON

The netif_wake_queue() is called correctly (i.e. only on !txfull
condition) from txdone routine.  So Unconditional call to the
netif_wake_queue() here is wrong.  This might cause calling of
start_xmit routine on txfull state and trigger BUG_ON.

This bug does not happen when NAPI disabled.  After txdone there
must be at least one free tx slot.  But with NAPI, this is not
true anymore and the BUG_ON can hits on heavy load.

In this driver NAPI was enabled on 2.6.33-rc1 so this is
regression from 2.6.32 kernel.

Reported-by: Ralf Roesch <ralf.roesch@rw-gmbh.de>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit)

This patch adds a new vid/pid to the cdc_ether whitelist.

Device added:
- Ericsson Mobile Broadband variant C3607w

Signed-off-by: Torgny Johansson <torgny.johansson@gmail.com>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv6: better document max_addresses parameter

Andrew Morton wrote:
>> >From ip-sysctl.txt file in kernel documentation I can see following description
>> for max_addresses:
>> max_addresses - INTEGER
>>         Number of maximum addresses per interface.  0 disables limitation.
>>         It is recommended not set too large value (or 0) because it would
>>         be too easy way to crash kernel to allow to create too much of
>>         autoconfigured addresses.
           ^^^^^^^^^^^^^^

>> If this parameter applies only for auto-configured IP addressed, please state
>> it more clearly in docs or rename the parameter to show that it refers to
>> auto-configuration.

It did mention autoconfigured in the text, but the below makes it more obvious.

More clearly document IPv6 max_addresses parameter.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: update mv643xx_eth maintenance status

I am no longer with Marvell.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

e1000: Fix DMA mapping error handling on RX

Check for error return from pci_map_single/pci_map_page and clean up.

With this and the previous patch the driver was able to handle a significant
percentage of errors (I set the fault injection rate to 10% and could still
download large files at a reasonable speed).

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "block: improve queue_should_plug() by looking at IO depths"

This reverts commit fb1e75389bd06fd5987e9cda1b4e0305c782f854.

"Benjamin S." <sbenni@gmx.de> reports that the patch in question
causes a big drop in sequential throughput for him, dropping from
200MB/sec down to only 70MB/sec.

Needs to be investigated more fully, for now lets just revert the
offending commit.

Conflicts:

include/linux/blkdev.h

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

drm/vmwgfx: Fix queries if no dma buffer thrashing is occuring.

Intercept query commands and apply relocations to their guest pointers.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-linus

* 'nouveau/for-airlied' of ../drm-nouveau-next:
  drm/nv50: fix vram ptes on IGPs to point at stolen system memory
  drm/nv50: fix instmem binding on IGPs to point at stolen system memory
  drm/nv50: improve vram page table construction
  drm/nv50: more efficient clearing of gpu page table entries
  drm/nv50: make nv50_mem_vm_{bind,unbind} operate only on vram
  drm/nouveau: Fix up pre-nv17 analog load detection.