Yong Qin [Mon, 16 Sep 2019 08:30:42 +0000 (16:30 +0800)]
vlock: log level less than 3, enc mode not work properly [1/1]
PD#TV-10211
Problem:
log level less than 3, the function call flow changed, and
enc mode vlock max line, max pixel varible havn't be initialed.
Solution:
move initial max line/pixel varible in vlock initial function.
Verify:
tl1
Change-Id: Ib36662045e28a911bf1585bf57bc849b1952d6f9
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Hong Guo [Thu, 20 Dec 2018 07:24:23 +0000 (15:24 +0800)]
CPUFREQ: use gp1 pll for cpufreq. [1/1]
PD#SWPL-3826
Problem:
use gp1 pll for cpufreq.
Solution:
use gp1 pll for cpufreq.
Verify:
x301_tl1
Change-Id: Iefb6d31ec40ba304f41024e4b7adceec881d043e
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
he.he [Tue, 10 Sep 2019 02:48:17 +0000 (22:48 -0400)]
usb: TOSHIBA Disk Can't Be Recognized on the Port of USB 2.0 [1/1]
PD#SWPL-14156
Problem:
TOSHIBA Disk can't be recognized on the Port of USB 2.0 and since then
any disk can't be recognized.This is because
that the CCS flag of the PORTSC is still set and if write 0
to 0x38 of usb phy register the CCS will change to
0 and so that other disks can be recognized.
Solution:
when the enumeration fails, call set_usb_phy_host_tuning.
Verify:
test pass on u212
Change-Id: I507f269afc825de75c7dcce5f79c9c1dd7793d84
Signed-off-by: he.he <he.he@amlogic.com>
zhiqiang liang [Fri, 10 May 2019 05:34:49 +0000 (13:34 +0800)]
power: optimize the power consumption of vad wakeup [1/1]
PD#SWPL-3826
Problem:
optimize the power consumption of tl1 with vad wakeup
Solution:
optimize the power consumption when enter freeze mode
switch the clk81 to 24M
cpu and dsu clk switch to gp1 pll，frequency is 600M
closed the fixed pll
closed the vddio_3.3V
Verify:
TL1 revB
Change-Id: I39170bb8efb91b126b6a15faad3cefee19b13089
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Jian Hu [Wed, 11 Sep 2019 06:05:35 +0000 (14:05 +0800)]
clk: add protection mechanism for all plls [1/1]
PD#SWPL-14024
Problem:
add protection mechanism for all plls
Solution:
add protection mechanism for all plls
Verify:
test passed on
1)axg
2)g12a
3)txl
4)txlx
Change-Id: I6f29026422f73c690854d5ffa292857d14922d22
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
yao liu [Mon, 16 Sep 2019 08:00:45 +0000 (04:00 -0400)]
dv: display green when playing sdr video on sdr tv [1/1]
PD#SWPL-14115
Problem:
DV is bypass for SDR->SDR case on sm1, but
bypass failed due to dolby_vision_status is
not sync with uboot.
Solution:
Update dolby_vision_status after startup.
Verify:
passed on sm1
Change-Id: I8025b0982ce5bfb2afc5ece1b5f14be54f3a80d6
Signed-off-by: yao liu <yao.liu@amlogic.com>
Zhongfu Luo [Mon, 9 Sep 2019 03:29:32 +0000 (11:29 +0800)]
defendkey: AXG: support secure upgrade check [3/3]
PD#SH-1185
Problem:
AXG need to support secure upgrade check
Solution:
1.add defendkey support in AXG dts
2.add defendkey config in smarthome defconfig
Verify:
AXG skt board verify pass
Change-Id: I1d173d4e7ce8d47c486bf8df4f6b7e417809c424
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
xianjun.liu [Mon, 16 Sep 2019 07:56:11 +0000 (15:56 +0800)]
MTD: Coverity defect cleanup: MTD [1/1]
PD#SWPL-13991
Problem:
Out-of-bounds read in get_free_node
Solution:
fix the issue
Verify:
AXG400
Change-Id: I6e41caf3b3118d524218d6023fb51df692865cba
Signed-off-by: xianjun.liu <xianjun.liu@amlogic.com>
qi duan [Mon, 16 Sep 2019 06:45:48 +0000 (02:45 -0400)]
eth: clk invert bit compatible for 100M when exphy [1/1]
PD#SWPL-14033
Problem:
if clk invert bit set, 100M will not connect
Solution:
don't invert clk when connect 100M network
Verify:
w400
Change-Id: I4c3acbcc0d05fc2c99b5a982461ab3d5ff83fe26
Signed-off-by: qi duan <qi.duan@amlogic.com>
qi duan [Wed, 4 Sep 2019 09:34:59 +0000 (05:34 -0400)]
ETH: add eth reset bit when resume. [1/1]
PD#SWPL-12602
Problem:
omni phy can not connect network probably
after long stress suspend test
for gxl/txl/txlx
Solution:
In suspend/resume sequeue, add eth reset
Verify:
verify on p212/r311
Change-Id: I4b6ab34eb2eae40533f4a33db8fb40a00f5b3d51
Signed-off-by: qi duan <qi.duan@amlogic.com>
jian.zhou [Wed, 11 Sep 2019 07:59:12 +0000 (03:59 -0400)]
audio: VAD use HIFI PLL [1/1]
PD#SWPL-12746
Problem:
VAD does not use HIFI PLL, it will effect vad wakup
Solution:
VAD use HIFI PLL
Verify:
T962X2_X301
Change-Id: Iad13661c4ec3495130f485447f3c8b034bee9ce2
Signed-off-by: jian.zhou <jian.zhou@amlogic.com>
Yue Wang [Thu, 12 Sep 2019 05:39:48 +0000 (13:39 +0800)]
usb: coverity fix [1/1]
PD#SWPL-14009
Problem:
Coverity defect cleanup - usb.
Solution:
Coverity defect cleanup - usb.
Verify:
sm1
Change-Id: Ib194a82e54f819e4ab59eab944b446683c894f15
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Nan Li [Mon, 9 Sep 2019 10:09:08 +0000 (18:09 +0800)]
sdio: optimize mmc tuning operation [1/1]
PD#SWPL-13914
Problem:
G12A TDMA affects the tuning, make tuning process
+/- dly is useless.
Solution:
add pdata save val operation.
Verify:
G12A_u212
Change-Id: I204dd989fae0d400b14725df068378be0262b1cc
Signed-off-by: Nan Li <nan.li@amlogic.com>
Xihai Zhu [Thu, 12 Sep 2019 10:05:13 +0000 (06:05 -0400)]
amvecm: detect out of range signal [1/1]
PD#SWPL-14102
Problem:
need to detect out of range signal
correctly
Solution:
refine the checking
Verify:
tl1
Change-Id: Ia2e47ca3a427e4f66a5464997aeb8dd766b4f7ff
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Hang Cheng [Wed, 11 Sep 2019 08:15:05 +0000 (16:15 +0800)]
hdmirx: add control for hdcp hpd [1/1]
PD#SWPL-14041
Problem:
sometimes after hpcp_hpd 0->1, ESM doesn't
respond to AKE_INIT, it will lead to flash
red screen on TCL DCLS-HG50
Solution:
add control for hpcp_hpd, keep it high by default
Verify:
X301
Change-Id: I8f8e5c880400084d6ed252667460c4e397b9909d
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Ruixuan Li [Fri, 23 Aug 2019 01:06:45 +0000 (09:06 +0800)]
emmc: run hs400 200M on tm2 [1/1]
PD#SWPL-12796
Problem:
tm2 is run hs200 200M now
Solution:
modify dts
Verify:
passed on tm2_t962e2_ab311
Change-Id: If834e822aefe3c9b469ff69ce58672a94caaabb4
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Xihai Zhu [Thu, 12 Sep 2019 02:34:11 +0000 (22:34 -0400)]
amvecm: fix failure for pattern detect [1/1]
PD#SWPL-14069
Problem:
special pattern is detected as colorbar
Solution:
tune the detection parameter
Verify:
tl1
Change-Id: I9079efe222888e6d9e2955c0cfd4f2d7ca0f6efa
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Shunzhou Jiang [Tue, 20 Aug 2019 12:09:13 +0000 (20:09 +0800)]
bl40: g12a/sm1: add m4 bringup path [1/3]
PD#SWPL-12964
Problem:
bring up m4
Solution:
add kernel driver
Verify:
U209+S905D3
Change-Id: Iaa57f24c919af013581b8e3faffb0b57f5af10ed
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Evoke Zhang [Wed, 4 Sep 2019 06:50:58 +0000 (14:50 +0800)]
tvafe: add 0x87, 0x11b support in pq trust list [1/1]
PD#SWPL-13775
Problem:
pq need update 0x87, 0x11b reg
Solution:
1.add 0x87, 0x11b support in pq trust list
2.update 0x87,0xfa,0x12e reg init setting for tl1
3.add dump regs for debug
Verify:
x301
Change-Id: I532d164f0fb7b01e817d19ece1498b970d40193e
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Luan Yuan [Thu, 20 Jun 2019 02:07:11 +0000 (10:07 +0800)]
dts: S905Y2 can not switch adb/usb. [1/1]
PD#SWPL-13103
Problem:
S905Y2 can not use adb.
Solution:
config dts, and switch the state in uboot.
setenv otg_device 0 or 1.
Verify:
verify by faraday.
Change-Id: If4cda761e346fb63d6918db74bc03f23cdcb3a1b
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Cao Jian [Tue, 10 Sep 2019 04:39:41 +0000 (12:39 +0800)]
osd: adjust threshold by using active_begin_line [2/2]
PD#SWPL-11936
Problem:
set screen position frequently
frame flashes white stripes
Solution:
modify threshold for updating all registers
on vsync coming
Verify:
Verfied on u212
Change-Id: Iac1ec8b5ec36809d5f5ffe2fe8e79c182e9c126b
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
Xihai Zhu [Wed, 11 Sep 2019 03:23:37 +0000 (23:23 -0400)]
amvecm: minor fix failure for color bar detect [1/1]
PD#SWPL-14019
Problem:
colorbar is not detected
Solution:
tune the detection parameter
Verify:
tl1
Change-Id: I0bdbe8a7fa5d55a7a5879959439dc87a51d86034
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
MingLiang Dong [Tue, 10 Sep 2019 05:51:46 +0000 (01:51 -0400)]
hdr: add hdr tone mapping ioctrol [1/1]
PD#SWPL-13948
Problem:
customer want to set hdr tone mapping curve themself,
we provide hdr interface for them
Solution:
add hdr iocontrol interface
Verify:
verify on TL1
Change-Id: I9b7d5b33e0a72c6d1ca1fca2ebffe2a3c7e460aa
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Hong Guo [Tue, 10 Sep 2019 05:40:39 +0000 (13:40 +0800)]
suspend: gxm can not enter suspend state issue [1/2]
PD#SWPL-13523
Problem:
gxm can't enter suspend
Solution:
modify the system sleep parameter
Verify:
gxm_q201
Change-Id: I697f03170a56925aa0fdb2160340cc0d480623a8
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
zhiwei.yuan [Mon, 9 Sep 2019 02:39:59 +0000 (10:39 +0800)]
vdin: System panic when calling stop_tvin_service twice continuously [1/1]
PD#SWPL-13880
Problem:
free_irq was called twice continuously while ponter is NULL at 2nd time.
Solution:
use mutex to prevent reentry
Verify:
verified by t962x2_x301
Change-Id: I8032d15de0a2fe5a1ab30b70af0e342d0aa3ac40
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Jihong Sui [Wed, 4 Sep 2019 06:41:40 +0000 (14:41 +0800)]
deinterlace: clear KASAN warning [1/1]
PD#SWPL-13378
Problem:
BUG: KASAN: use-after-free in di_task_handle+0x1dc/0x790
Solution:
add judgement before use
Verify:
u212
Change-Id: I6281257997239fa9adbe215ca31ef7d760c9302c
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jian Hu [Fri, 6 Sep 2019 11:47:02 +0000 (19:47 +0800)]
clk: tm2: fix pcie pll lock failed [1/1]
PD#SWPL-11934
Problem:
pcie pll lock failed some times
Solution:
1.add retry mechanism when pcie lock failed
2.add protection mechanism for all plls
Verify:
test passed on tm2 ab311
Change-Id: Id34e87d84e2bc2368c074556f500f8af1f2a4088
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Jihong Sui [Tue, 3 Sep 2019 07:21:04 +0000 (15:21 +0800)]
deinterlace: add retry for pre timeout [1/1]
PD#SWPL-13664
Problem:
when open some special UI app, DI will have a lot of timeout,
this cause display abnormal.
Solution:
add retry after timeout;
Verify:
tl1
Change-Id: I3316252577bad218256651ebbc6d4fd8b25acb12
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Xihai Zhu [Tue, 10 Sep 2019 01:55:27 +0000 (21:55 -0400)]
amvecm: minor fix for pattern detection function [1/1]
PD#SWPL-13075
Problem:
use the correct config option
Solution:
fix the wrong config option
Verify:
tl1
Change-Id: I87d3ba28c32fa77e12143522a4a342fdfe144af5
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Wencai You [Thu, 5 Sep 2019 14:44:36 +0000 (22:44 +0800)]
dv: HDR Luminance exceeded recommendation range [1/1]
PD#SWPL-13766
Problem:
HDR Luminance 285.5 exceeded recommendation range 300~400
Solution:
increase graphic target max luminuance for HDR output
Verify:
Verified on u212
Change-Id: Ib873f18843a1a93149d0454d67345071e512893b
Signed-off-by: Wencai You <wencai.you@amlogic.com>
Xihai Zhu [Fri, 23 Aug 2019 12:22:48 +0000 (08:22 -0400)]
amvecm: add pattern detection function [1/1]
PD#SWPL-13075
Problem:
some pattern need special handling
Solution:
per VLSI'e suggestion, add pattern
detection to try to detect special pattern
Verify:
tl1
Change-Id: I545b6e8c1b4a11fca927be46f16caeeb2cbe5327
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Shuai Li [Fri, 6 Sep 2019 08:26:02 +0000 (16:26 +0800)]
audio: mclk pad0 doesn't output clk [1/1]
PD#OTT-5603
Problem:
Configurate GPIO_AO 9 as mclk_0,it doesn't work.
Solution:
From SM1, the mclk pad register is changed.
Using standard clk tree to make it compitable.
Verify:
TM2, SM1.
Change-Id: I8d53296297536c90768495232570f33fc89db131
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Evoke Zhang [Tue, 3 Sep 2019 03:00:32 +0000 (11:00 +0800)]
tvafe: update 0x18b setting for av pali for tl1 [1/1]
PD#TV-8586
Problem:
av pali need update 0x18b setting
Solution:
update 0x18b setting for av pali for tl1
Verify:
x301
Change-Id: I64bddac5c4196110b46ebfbd7a89ee97095a7f82
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Jihong Sui [Wed, 4 Sep 2019 04:16:31 +0000 (12:16 +0800)]
deinterlace: add condition for switch to EI in de_post_process [1/1]
PD#SWPL-12002
Problem:
pause and plug out/in hdmi tx, display abnormal
Solution:
add condition for switch to EI in de_post_process
ref to IPTV's project
Verify:
G12A
Change-Id: I6230464c308660c62199aa24ad5843e7c7bd070d
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
zhiwei.yuan [Fri, 30 Aug 2019 08:24:59 +0000 (16:24 +0800)]
vdin: HDMI source occurred tortured picture and had sound [1/1]
PD#SWPL-13676
Problem:
vdin status is confused when enter hdmi
Solution:
reset afifo every time enter the channel
Verify:
verified by t962x2_x301
Change-Id: I9ec78bebec4d2d5e312de82942c29a940fc322ea
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
yao liu [Tue, 3 Sep 2019 09:44:18 +0000 (05:44 -0400)]
dv: display abnormal after hotplug hdmi [1/1]
PD#SWPL-13367
Problem:
HDMI hotplugged during video pause,
system control first set disable_video 1,
then DV core turn on due to sink changed,
then OMX sets disable video 2. DV core 1
is disabled after video_onoff_state is set to OFF.
Solution:
Monitor video status, parser and toggle once
to enable core1 when video off->on.
Verify:
SM1
Change-Id: Ied6f1f05ed1592f9917c093b5d567904a3bdc61c
Signed-off-by: yao liu <yao.liu@amlogic.com>
nengwen.chen [Fri, 30 Aug 2019 11:41:40 +0000 (19:41 +0800)]
atv_demod: audio: fix audio source contorl for atv demod [1/1]
PD#TV-9484
Problem:
1.fix audio source contorl for atv demod.
Solution:
1.fix audio source contorl for atv demod.
2.increase the output power of ATV audio.
Verify:
Verified by r311.
Change-Id: I1332dcd3b968790e3227170799ddb019578fe431
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Hang Cheng [Thu, 5 Sep 2019 07:57:11 +0000 (15:57 +0800)]
hdmirx: add option for scdc enable [1/1]
PD#SWPL-13667
Problem:
some devices may forcely send signal above 3.4G
even if TV announce hdmi1.4 edid, such as apple
TV box, Samsung UBD-K8500 dvd; and for QD6508 box
of TCL, it will not send signal out if scdc NAK
Solution:
add a scdc force enable option to cover this
issue. by default, scdc is enabled or not
accroding to current edid version
Verify:
X301
Change-Id: Ibdacbd3bb1edbdcb99637252530d19510fbcfb1d
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
yicheng shen [Thu, 5 Sep 2019 10:24:31 +0000 (06:24 -0400)]
hdmirx: optimize esm clock init sequence [1/1]
PD#SWPL-13779
Problem:
esm can not work after burning a new key and regenerating new
fw.le as the esm clock was not configured when probe.
Solution:
so we need to configure ESM clock no matter hdcp2.2
is burned or not.
Verify:
None
Change-Id: I793b63ad2f20434b9f8f27ccca7c80dee2990718
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Yue Wang [Fri, 6 Sep 2019 04:25:09 +0000 (12:25 +0800)]
usb: disable AB311 usb3.0 [1/1]
PD#SWPL-13820
Problem:
disable AB311 usb3.0.
Solution:
disable AB311 usb3.0
Verify:
tm2
Change-Id: Ic69c8ea8e9f31d66f738a019d6b59e2d9a1a51a4
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Dezhi Kong [Mon, 2 Sep 2019 11:53:09 +0000 (19:53 +0800)]
csc: add vinfo check for csc process [1/1]
PD#SWPL-13491
Problem:
After plugging and unplugging HDMITX,
the panel screen color display is abnormal
for dual display platform.
Solution:
add vinfo->mode check for csc process,
avoid process null and invalid vinfo case.
Verify:
verify by AC202(sm1)
Change-Id: I54c54adcf2a0fc9a02e35b0ef24a720a55a8781a
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Dezhi Kong [Wed, 28 Aug 2019 08:11:53 +0000 (16:11 +0800)]
osd: add osd blend reg config check. [1/4]
PD#SWPL-2049
Problem:
osd3 din blend config may be incorrect when viu2 is enable
Solution:
add osd blend reg config check
Verify:
verify by AC202(sm1)
Change-Id: I3d8ff0d247226d4df1386808caba2a21a34f0b10
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
he.he [Thu, 5 Sep 2019 09:21:34 +0000 (05:21 -0400)]
usb: CtsVerifier.apk usb device test failed [1/1]
PD#SWPL-13498
Problem:
The printing may delay the usb_disconnect processing, result to
USB transfer error during reconnecting.
Solution:
Moving the print in proc_setconfig of devio.c .
Verify:
test pass on sm1
Change-Id: I5c45abb2d5d640e2e02dc3e0c08b10ca7a294eeb
Signed-off-by: he.he <he.he@amlogic.com>
Shuai Li [Fri, 30 Aug 2019 10:38:21 +0000 (18:38 +0800)]
audio: make loopback compitable with chips [1/1]
PD#TV-8363
Problem:
Loopback doesn't work on TM2.
TL1 doesn't support loopback in OE pins.
Solution:
Make it compitable with chips.
Add tdm_lb format and chmasks.
Verify:
TM2 AB311 and TL1 X301.
Change-Id: If878fe75fc87857eae7a44439a451c5b2f494c67
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Brian Zhu [Thu, 5 Sep 2019 12:02:49 +0000 (20:02 +0800)]
dts: ge2d: correct the ge2d irq number [1/1]
PD#SWPL-13669
Problem:
Ge2d irq number is wrong on g12a/g12b/sm1.
Solution:
Replace the correct number
Verify:
Verified on u212
Change-Id: Ia3d202dc10cb978033892efb1de251bf5cf1df31
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Pengcheng Chen [Tue, 3 Sep 2019 09:31:15 +0000 (17:31 +0800)]
dts: add osd logo_reserved [1/1]
PD#SWPL-13646
Problem:
uboot logo flashed
Solution:
add osd logo_reserved
Verify:
test pass on p212
Change-Id: I73d95faffea80c68e8d0a04750d33fd0c821ca44
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Xing Wang [Fri, 30 Aug 2019 06:33:50 +0000 (14:33 +0800)]
audio: auge: add loopback + vad [1/1]
PD#TV-8989
Problem:
loopback with datain pdm, no vad to wakeup
Solution:
loopback with pdmin still works when entry freeze mode
vad works in two channel mode, mapping pdm ch0 & ch1 to vad
add channel num to loopback for vad
Verify:
x301
Change-Id: Ied244292bf2a2f668bb5a2216ec6a12964a46663
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Lei Yang [Mon, 2 Sep 2019 07:40:18 +0000 (15:40 +0800)]
hdmirx: add repeater14 for TM2 [1/2]
PD#SWPL-12502
Problem:
new function
Solution:
add new function of TM2
Verify:
T962E2
Change-Id: Idd5843d39bb9235fe0abdf9aaaca3be6dd2795e7
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
Pengcheng Chen [Wed, 4 Sep 2019 03:15:32 +0000 (11:15 +0800)]
vpp: sr software flow improvement [1/1]
PD#SWPL-13633
Problem:
sr input size need improvement
Solution:
improvement sr software flow
Verify:
verified by sm1
Change-Id: I10b9dd6d057fc8906ce312576623480aa14ae8a3
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Zhuo Wang [Tue, 3 Sep 2019 03:33:16 +0000 (11:33 +0800)]
ethernet: q201 change to internal phy [1/1]
PD#SWPL-13557
Problem:
change q201 to internal phy
Solution:
change q201 to internal phy
Verify:
q201
Change-Id: Iae23461edf6169207a5f0468cba8edda8b8a5e75
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
Blance Tang [Tue, 3 Sep 2019 08:50:50 +0000 (16:50 +0800)]
buildroot: Disable lcd-drm in ac200_drm_buildroot dts [1/1]
PD#SWPL-13623
Problem:
Wayland-DRM broken due to lcd-drm is enabled
Solution:
Disable lcd-drm
Verify:
Local
Change-Id: I2e4c7cded9e6979b97fb652e2d0d824c8af54ef6
Signed-off-by: Blance Tang <guofeng.tang@amlogic.com>
zhiwei.yuan [Mon, 2 Sep 2019 06:08:00 +0000 (14:08 +0800)]
vdin: TL1 screen is black when switch out hdmi to others [1/1]
PD#SWPL-13556
Problem:
hdmi signal has changed(color space, hdr etc.) before switch source
Solution:
clear the change flag when stop dec
Verify:
verified by t962x2_x301
Change-Id: I79c6dba9bf69f70850714c5810ae724b5d35e1e3
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Rongjun Chen [Wed, 14 Aug 2019 08:57:17 +0000 (16:57 +0800)]
wifi: chang the static buf to support ap6356 [2/2]
PD#SWPL-12561
Problem:
ap6356 open fail
Solution:
update static buf to fix it
Verify:
ampere
Change-Id: Iec415b0dcf46b3e5574bcb3673d5129b4f35c802
Signed-off-by: Rongjun Chen <rongjun.chen@amlogic.com>
shaochan.liu [Mon, 2 Sep 2019 05:37:06 +0000 (13:37 +0800)]
lcd: tcon: add load flash data to update gamma voltage for lcd driver [2/2]
PD#TV-6676
Problem:
the auto gamma function need load flash data to update gamma voltage
gor lcd driver
Solution:
add load flash data to update gamma voltage
Verify:
t962x2_x301
Change-Id: I80176e4a146fe453c3d3b5919c96b659be1286ea
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Rico Yang [Tue, 27 Aug 2019 02:17:49 +0000 (22:17 -0400)]
ionvideo: check and releaes ion_id when fd closed [1/1]
PD#SH-726
Problem:
ion_id leak
Solution:
release ion_id when closed
Verify:
verified on w400
Change-Id: Ie72a0fb5f4243d83aa5d7ca6be2c5cfa8844a6b2
Signed-off-by: Rico Yang <wei.yang@amlogic.com>
shaochan.liu [Wed, 28 Aug 2019 05:33:16 +0000 (13:33 +0800)]
lcd: add lcd status for detect VBO LOCKN and VBO HPDN work properly [1/1]
PD#TV-9186
Problem:
need provide interfaces for detect VBO LOCKN and VBO HPDN work properly.
Solution:
add lcd status for detect VBO LOCKN and VBO HPDN work properly
Verify:
t962x2_x301
Change-Id: I1f441a42f656205ef2ec15429c883ffc67e60a95
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Shuai Li [Mon, 2 Sep 2019 11:10:53 +0000 (19:10 +0800)]
audio: Spk_mute has no effect [1/1]
PD#OTT-6073
Problem:
Spk_mute has no effect.
Solution:
The gpio get function get the wrong name.
After correction, it works good.
Verify:
TM2.
Change-Id: Icf0356ec3238fda6e78e778ebaa812af445ccfd5
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Yong Qin [Mon, 19 Aug 2019 08:29:49 +0000 (16:29 +0800)]
vlock: for support double frq out [1/1]
PD#SWPL-12698
Problem:
Add feature for support input 25Hz, 30Hz
Solution:
Add feature for support input 25Hz, 30Hz
Verify:
tl1
Change-Id: I753547078e26b77edd6e69f452afcd9d49a17063
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
huijie.huang [Thu, 29 Aug 2019 11:08:31 +0000 (19:08 +0800)]
dts: mbox add video11 and video12 for screencontrol [1/2]
PD#SWPL-13022
Problem:
mbox needs to support screencontrol
Solution:
add video11 and video12 node
Verify:
SM1-AC202
Change-Id: I1197fceb6cdc2d220318bbd87281b55dff98a665
Signed-off-by: huijie.huang <huijie.huang@amlogic.com>
zhiwei.yuan [Fri, 30 Aug 2019 07:04:13 +0000 (15:04 +0800)]
vdin: improve robustness of vdin drvier for reentry case [1/1]
PD#SWPL-13492
Problem:
disable irq cnt don't equal to enable
Solution:
corrent mutex mechanism for vdin driver
Verify:
verified by t962x2_x301
Change-Id: I9d33c8297c9ed4d155233948d1d6bb7dfc6ca4a4
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Cheng Tong [Wed, 28 Aug 2019 08:35:39 +0000 (16:35 +0800)]
dts: increase i2c3 clock frequency to 300k [2/2]
PD#SWPL-13393
Problem:
demod init cost about 8s
Solution:
increase i2c3 clock frequency
Verify:
on s905x3
Change-Id: I6e69629f088599f2e3b36f36d4da35df4d65034a
Signed-off-by: Cheng Tong <cheng.tong@amlogic.com>
Evoke Zhang [Fri, 16 Aug 2019 11:56:21 +0000 (19:56 +0800)]
tvafe: add pq table management [1/1]
PD#SWPL-12842
Problem:
tvafe pq setting logic is not very clear
Solution:
add pq table management for different port and format
Verify:
x301
Change-Id: I9d7ae16166c73a997d9697e61bf77a87ba743d5c
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
shaochan.liu [Fri, 26 Jul 2019 08:07:02 +0000 (16:07 +0800)]
lcd: add driver for pmu data check [2/2]
PD#TV-6928
Problem:
CS602 need pmu data check
Solution:
add i2c_CS602 driver with pmu data check
Verify:
t962x3_ab301
Change-Id: I1d1f33cbb63cb4f3b3fc308d610411091cb2a65d
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Tao Zeng [Wed, 28 Aug 2019 07:25:40 +0000 (15:25 +0800)]
mm: fix wrong kasan report [1/1]
PD#SWPL-13281
Problem:
There are 2 types of wrong kasan report after merge change of
save wasted slab.
1, slab-out-of-bounds, which is caused by krealloc set shadow
memory out-of-range, since tail of page was freed.
2, use-after-free, which is caused by kasan_free_pages called
after a page freed. Because this function already called in
free_page, so it marked shadow memory twice.
Solution:
1, make shadow do not out of range if a tail page was freed and
been realloc again.
2, remove call of kasan_free_pages.
Verify:
X301
Change-Id: Ib5bdcbb618a783920009bb97d112c361888b0d7c
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
yao liu [Mon, 26 Aug 2019 13:58:21 +0000 (09:58 -0400)]
dv: enable drop frame for dv [1/1]
PD#SWPL-13115
Problem:
Apk drop lots of frames before render
the first frame, in this case, omx_run
is false and no frames will render.
Decoder doesn't have free output buffer.
Solution:
Drop dv frames in video sync before render
the first frame if app want to drop.
Verify:
Verified on U212
Change-Id: I463619f658d7f78ad8d513e17ca78482e17b3a4e
Signed-off-by: yao liu <yao.liu@amlogic.com>
jiejing.wang [Tue, 27 Aug 2019 08:44:32 +0000 (16:44 +0800)]
spdif: fix reboot system crash [1/1]
PD#SWPL-13288
Problem:
reboot system crash
Solution:
when shutdown don't disable sysclk
Verify:
verify by x301
Change-Id: I46f319aeef5ed92e257d3e75728b1a705d981189
Signed-off-by: jiejing.wang <jiejing.wang@amlogic.com>
MingLiang Dong [Tue, 27 Aug 2019 07:30:46 +0000 (03:30 -0400)]
amvecm: remove tm2 cm curve setting [1/1]
PD#SWPL-13141
Problem:
The first time the video is played after booting,
the probability flashes a pink screen
Solution:
remove tm2 cm curve setting
Verify:
verify on TM2
Change-Id: I8d99e6ee203fbbb48154ed0aaf101465a0f18cb4
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
jintao xu [Mon, 19 Aug 2019 09:27:33 +0000 (17:27 +0800)]
amvideo: add drop frame debug interface [1/1]
PD#TV-9005
Problem:
Statistical pip actual frame dropping
Solution:
add drop frame debug interface
Verify:
AB301
Change-Id: Ibf035691b9d991eee68a274aaba36afa2b1a5c53
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
qi duan [Thu, 22 Aug 2019 09:45:15 +0000 (05:45 -0400)]
ETH: remove release open when resume for amlogic phy. [1/1]
PD#SWPL-13132
Problem:
stammac release/open when resume will change the dma addr.
if stmmac_xmit and stmmac_tx_work are running at the same time
it will cause panic
Solution:
remove stmmac_release/open call in stmmac_resume for chip
g12a/g12b/tl1/tm2
Verify:
verify on TL1
Change-Id: I5abf2ccf72c39483bbd1cce7b9e24bf596f30d0f
Signed-off-by: qi duan <qi.duan@amlogic.com>
MingLiang Dong [Tue, 27 Aug 2019 06:47:57 +0000 (02:47 -0400)]
hdr: default hdr policy follow source [1/1]
PD#SWPL-11602
Problem:
default hdr follow sink, sdr video color is different from standard sdr
Solution:
default hdr policy follow source, UI switch follow sink or follow source
Verify:
verify on G12A
Change-Id: Ie668f06d45bb3881ee71ac4580dc3bf8f107dafa
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
qi duan [Thu, 15 Aug 2019 07:58:34 +0000 (03:58 -0400)]
ETH: do eth reset bit when resume. [1/1]
PD#SWPL-12780
Problem:
internal phy can not connect network probably
after long stress suspend test
Solution:
In suspend/resume sequeue, add eth reset
Verify:
verify on TL1 and G12b
Change-Id: Id8f6767686f4e4d52774d9ac28dac46549a52d4c
Signed-off-by: qi duan <qi.duan@amlogic.com>
Guosong Zhou [Mon, 26 Aug 2019 11:14:35 +0000 (07:14 -0400)]
camera: fix gc2145 mipi camera mirror [1/1]
PD#SWPL-12760
Problem:
camera preview interface left and right invert
Solution:
adjust gc2145 mipi camera mirror register
Verify:
S905D3-AC200
Change-Id: I1789e5d055bf8661e6ec30f67e6e8db4a6fc99f6
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Brian Zhu [Sat, 24 Aug 2019 16:23:37 +0000 (00:23 +0800)]
dv: add more condition to reset the control path [1/1]
PD#SWPL-11314
Problem:
When playing profile 4, multiple resolution and dual layer dv
streaming, switching non-4k to 4K (DOVI->SDR), need do once
control path reset since the core1 setting is not correctly.
Solution:
Improve the condition to reset control path
Verify:
Verified on AC211
Change-Id: I229a33228377bd9ff7811b4a25e973eeba8af66d
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Dezhi Kong [Wed, 7 Aug 2019 06:35:07 +0000 (14:35 +0800)]
drm: add TL1 drm support [1/1]
PD#SWPL-7987
Problem:
TL1 DRM support
Solution:
add TL1 DRM support
Verify:
t962x2_x301
Change-Id: Ibc8ff641f42c0a416e80c3a420c1d808e0ad8b26
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Rui Wang [Wed, 21 Aug 2019 11:34:05 +0000 (19:34 +0800)]
video: modify the statistics of new frame count [1/1]
PD#TV-8725
Problem:
STR standby, wake up, takes a long time, takes 5-6s.
Solution:
When the first frame is displayed,
the statistics start new frame count.
Verify:
Verified with X301
Change-Id: Ib318455959fe9688f3c697b1d562388547002877
Signed-off-by: Rui Wang <rui.wang@amlogic.com>
Evoke Zhang [Thu, 15 Aug 2019 10:52:18 +0000 (18:52 +0800)]
cvbsout: fix cgms config mistake for NTSC [1/1]
PD#OTT-5683
Problem:
NTSC cgms signal is incorrect
Solution:
fix cgms config mistake
Verify:
u212
Change-Id: I4a3dce8d6b3439be974a8aea48ca1d445feee25b
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Jihong Sui [Fri, 23 Aug 2019 09:24:24 +0000 (17:24 +0800)]
deinterlace: set post phase to 8 when crop left odd [2/2]
PD#SWPL-13223
Problem:
there is a white line on left when crop left is odd
Solution:
set post mif phase to 8;
Verify:
TL1
Change-Id: Ic39e15f5c1d07e756ecc4909366af35d1472dc29
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Pengcheng Chen [Fri, 23 Aug 2019 05:27:25 +0000 (13:27 +0800)]
vpp: set vd mif chroma init hphase to 8 when h crop start is odd [1/2]
PD#SWPL-13223
Problem:
when crop left is odd, the video has white edge
Solution:
if vframe not processed by di,
set vd mif chroma init hphase to 8 when h crop start is odd
Verify:
verify on T972
Change-Id: Ica57503e6eebd57972129513304ae39b445ccf77
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Dezhi Kong [Thu, 1 Aug 2019 11:07:18 +0000 (19:07 +0800)]
drm: merge commit related to gamma [1/1]
PD#SWPL-11059
Problem:
gamma setting in DRM
Solution:
merge commit related to gamma
Author: Ao Xu <ao.xu@amlogic.com>
Date: Tue Oct 30 19:18:21 2018 +0800
drm: add meson private property gamma_lut
When setting CTM, gamma is also set again.
Setting gamma frequently will lead to visual glitches.
Add a private value to record whether
gamma_lut blob is changed.
Bug: b/
113682067
Test: Ran on device and changed gamma to verify there are no glitches
Author: Fergus Simpson <afergs@google.com>
Date: Fri Aug 10 13:18:36 2018 -0700
[Estelle] Enable top/bottom color clamping
Modifies amvecm's color clipping to allow either the lower or upper
limit to be set. This sets clipping registers that hold the top and
bottom 10-bit clipping values for each color channel.
This does not cause the artifacts that we've been seeing while trying
enable the gamma tables.
Usage (set a clip of 32/255):
echo
20080020 > /sys/class/amvecm/color_bottom
Bug:
109942195
Test: Flashed to device and tested with a internal changes that use the
registers.
Author: Frank Chen <frank.chen@amlogic.com>
Date: Wed Aug 8 15:21:17 2018 +0800
remove gamma_enable in am_meson_crtc_create
Verify:
verify by u200
Change-Id: I4221b3b4671516e7afd4dea14ce3cd71b4b66433
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
zhiwei.yuan [Wed, 14 Aug 2019 09:20:32 +0000 (17:20 +0800)]
dtv_demod: tl1 dtmb Suppress 0dB echo capability mode 5 test failed [1/1]
PD#SWPL-13072
Problem:
coefficient is not match 24M clk
Solution:
setting 24M clk coefficients
Verify:
verified by t962x2_x301
Change-Id: Ia8fc41f7aa3a9c99619ffae017c80056423c230e
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Hang Cheng [Thu, 22 Aug 2019 09:29:49 +0000 (17:29 +0800)]
hdmirx: optimize for hdcp22 [1/1]
PD#SWPL-13130
Problem:
on LG UBK80-N DVD, hdcp22 auth passed before esm reset,
auth status will be reset, result in black screen
Solution:
delay hdcp22 auth to after esm reset
Verify:
TXLX
Change-Id: I4e7fe60cf3117712eea5f8b1eec65d544b557a48
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Evoke Zhang [Mon, 3 Jun 2019 03:28:28 +0000 (11:28 +0800)]
dts: tvafe: update cutwindow for tl1 [1/1]
PD#SWPL-8866
Problem:
atv line freq adjust is not qualified
Solution:
update cutwindow
Verify:
x301
Change-Id: Iaeaa2fbf27db22ad17ef2700e70f7af424a2539a
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Mon, 19 Aug 2019 07:32:09 +0000 (15:32 +0800)]
hdmitx: disable clk when vout disable hdmitx [1/1]
PD#SWPL-12382
Problem:
active hdmitx clk will cause cvbsout clk cleared by bl30 auto limitation
Solution:
disable hdmitx clk when vout disable hdmitx
Verify:
p281
Change-Id: Ie9da30173d682901e9160a0db9c775c204a770f9
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
zhiwei.yuan [Tue, 20 Aug 2019 09:02:52 +0000 (17:02 +0800)]
vdin: XGIMI,keytone,Wake up after STR stb,screen is always black [1/1]
PD#SWPL-12972
Problem:
vdin regs has been set to default when entering suspend.
Solution:
don't set regs since upper layer will not start again after resume.
Verify:
verified by t962x2_x301
Change-Id: Ic1042e0b1a9ba4482fe79c51606e366f60e31f59
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Yong Qin [Thu, 22 Aug 2019 07:34:41 +0000 (15:34 +0800)]
vdin: vdin pixel probe [1/1]
PD#SWPL-13123
Problem:
add vdin pixel proble function
Solution:
1.matrix sel
2.post select
3.pixel proble
Verify:
TL1
Change-Id: I56f8898e92fee71662952481f06ed32e77b396ce
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Brian Zhu [Sat, 24 Aug 2019 14:05:11 +0000 (22:05 +0800)]
dv: update el vf correctly [1/1]
PD#SWPL-12849
Problem:
Update meta and el function was called incorrectly. It
will cause the BL and EL mismatch.
Solution:
Correct the calling sequence to get correct EL frame
Verify:
Verified by AC211
Change-Id: I6c9f0221a9facd361fcd18dcda55cc3967593c1c
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Brian Zhu [Fri, 23 Aug 2019 08:18:18 +0000 (16:18 +0800)]
vpp: remove line int rdma operation for g12b revb [1/1]
PD#SWPL-9266
Problem:
Using line int rdma will randomly cause dv/hdr register setting
incompleted during one vsync.
Solution:
Disable line int rdma operation. Always enable dv/hdr core
for osd.
Verify:
Verified on galilei revb
Change-Id: I8622896ab0432ef3d9db843aa5ab6d06168aad2a
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Yue Wang [Fri, 23 Aug 2019 07:19:27 +0000 (15:19 +0800)]
usb: detect stop endpoint race using pending timer instead of counter. [1/1]
PD#SWPL-13177
Problem:
stop endpoint race
Solution:
A counter was used to find out if the stop endpoint completion raced with
the stop endpoint timeout timer. This was needed in case the stop ep
completion failed to delete the timer as it was running on anoter cpu.
The EP_STOP_CMD_PENDING flag was not enough as a new stop endpoint command
may be queued between the command completion and timeout function, which
would set the flag back.
Instead of the separate counter that was used we can detect the race by
checking both the STOP_EP_PENDING flag and timer_pending in the timeout
function.
Verify:
franklin
Change-Id: Ie958ffd530a6bd176d0cf451894a5bd4dece38da
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Brian Zhu [Thu, 22 Aug 2019 13:27:26 +0000 (21:27 +0800)]
vpp: enable sr function when DV enable with non-cert mode [1/1]
PD#SWPL-12722
Problem:
Previously, disabled the SR function when DV on. Since we want
to pass the dv certification without any external flag setting.
But it will affect the PQ function in SR after g12a.
Solution:
Just enable SR function under DV on. Only disable it under
certification mode.
Verify:
Verified on u212
Change-Id: I01bb8cad3fd48246f5af884f84dcc280f85908a1
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Ruixuan Li [Thu, 8 Aug 2019 02:08:32 +0000 (10:08 +0800)]
emmc: run hs400 200M on sm1 [1/1]
PD#SWPL-12424
Problem:
run hs400 166M on sm1 now
Solution:
modify dts
Verify:
passed on sm1_ac200
Change-Id: I28f5f8da3481c9f2a19e27bc8e430a3379ec6b2a
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Gongwei Chen [Tue, 20 Aug 2019 07:38:53 +0000 (15:38 +0800)]
dts: ac214 add tunner DVB-S2+ISDB-T:AV2018+CXD22856+R836 [1/3]
PD#SWPL-12874
Problem:
ac214 add tunner DVB-S2+ISDB-T:AV2018+CXD22856+R836
Solution:
ac214 add tunner DVB-S2+ISDB-T:AV2018+CXD22856+R836
Verify:
Verify by Android P ac214
Change-Id: If7cd5f35b12b44a2080ff0c9d1e3d90d5d3d96a9
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
jiejing.wang [Tue, 23 Jul 2019 08:16:51 +0000 (16:16 +0800)]
spdif: fix standby power consumption is too high [1/1]
PD#SWPL-12461
Problem:
standby power consumption is too high
Solution:
1.when standby set spdif pin low
2.when standby set GPIOAO_2 low
Verify:
verify by U212
Change-Id: I29699688288b0e09529b7a35a4559ff1fad9891e
Signed-off-by: jiejing.wang <jiejing.wang@amlogic.com>
yao liu [Mon, 19 Aug 2019 11:41:13 +0000 (07:41 -0400)]
dolby: enable DV output in uboot [4/6]
PD#SWPL-392
Problem:
black screen 1s during kernel boot at 4k30hz.
The reason is vic is 0.
Solution:
Init vic when hdmi init.
Verify:
G12A
Change-Id: I0e055ddb1fcd9ee4c7bc009c9160176a0c101d8b
Signed-off-by: yao liu <yao.liu@amlogic.com>
yao liu [Fri, 9 Aug 2019 13:25:08 +0000 (09:25 -0400)]
dolby: enable DV output in uboot [2/6]
PD#SWPL-392
Problem:
transition from uboot to kernel is not smooth
Solution:
enable DV output in uboot and kernel check if
dolby enabled in uboot
Verify:
G12B/G12A
Change-Id: I7f310794cf18a54c15a6f059c460e8dcdf9c25aa
Signed-off-by: yao liu <yao.liu@amlogic.com>
nengwen.chen [Thu, 22 Aug 2019 08:01:54 +0000 (16:01 +0800)]
atv_demod: optimize calls with other modules [1/1]
PD#TV-9100
Problem:
1.optimize calls with other modules.
Solution:
1.optimize calls with other modules.
2.add ext file interacts with other modules.
3.add sync to prevent NULL pointer crashes.
Verify:
Verified by x301
Change-Id: Id1930400454b020616e0c669cae5f473f498b6de
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Jihong Sui [Wed, 21 Aug 2019 09:25:12 +0000 (17:25 +0800)]
deinterace: close cue except local play [1/1]
PD#SWPL-12404
Problem:
red and green stripes dividing line flash black line
Solution:
close cue(422/444) except local play(420)
VLSI-yanling suggest
Verify:
TL1
Change-Id: Ied1554d6a0e64e00aea1e692ab6b405f87387095
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Zongdong Jiao [Wed, 21 Aug 2019 11:59:14 +0000 (19:59 +0800)]
hdmitx: remove unnecessary sentences [2/2]
PD#SWPL-12305
Problem:
Rx may lost synchronization when Tx switches modes
Solution:
remove unnecessary sentences
Verify:
SM1/AC213
Change-Id: Iba88a9a558cce822ff939ad98a992dcf5161eba7
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Evoke Zhang [Wed, 21 Aug 2019 08:31:55 +0000 (16:31 +0800)]
tvafe: update 0x01 setting for tl1 avin ntsc-m [1/1]
PD#SWPL-13114
Problem:
ntsc-m display is too dark
Solution:
increase brightness for tl1 avin ntsc-m
Verify:
tl1
Change-Id: Ifd2b59119095dddf565deb6497c5bb67192e230a
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Wed, 21 Aug 2019 05:34:43 +0000 (13:34 +0800)]
backlight: iw7027: disable 50/60hz config change [1/1]
PD#TV-9072
Problem:
backlight flicker in 50hz display mode for iw7027
Solution:
disable iw7027 50/60hz config change
Verify:
txlx
Change-Id: I9fb9f202f69946a04753fd0d7399ffe228524dce
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
nengwen.chen [Thu, 13 Jun 2019 07:54:12 +0000 (15:54 +0800)]
atv_demod: fix secam-l/l' recognition and audio output [1/4]
PD#TV-7982
Problem:
fix secam-l/l' recognition and audio output.
Solution:
1.fix secam-l/l' recognition and audio output.
2.atv demod version: V2.13.
Verify:
Verified by x301
Change-Id: Ie09b635f132397b3c438aa3ff62f2ef915eb3462
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
projects / platform / kernel / linux-amlogic.git / log