Dan Carpenter [Mon, 27 Jul 2020 13:39:40 +0000 (16:39 +0300)]
drm/amd/powerplay: off by one bugs in smu_cmn_to_asic_specific_index()
These tables have _COUNT number of elements so the comparisons should be
>= instead of > to prevent reading one element beyond the end of the
array.
Fixes:
8264ee69f0d8 ("drm/amd/powerplay: drop unused code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christophe JAILLET [Mon, 27 Jul 2020 10:34:21 +0000 (12:34 +0200)]
drm/radeon: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'radeon_gart_table_ram_alloc()' GFP_KERNEL
can be used because its callers already use this flag.
Both 'r100_pci_gart_init()' (r100.c) and 'rs400_gart_init()' (rs400.c)
call 'radeon_gart_init()'.
This function uses 'vmalloc'.
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christophe JAILLET [Mon, 27 Jul 2020 10:34:36 +0000 (12:34 +0200)]
drm/radeon: avoid a useless memset
Avoid a memset after a call to 'dma_alloc_coherent()'.
This is useless since
commit
518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Fri, 24 Jul 2020 20:36:07 +0000 (16:36 -0400)]
drm/amd/display: Use proper abm/backlight functions for DCN3
Use DCN21 functions instead of DCE110
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Tue, 21 Jul 2020 17:59:52 +0000 (13:59 -0400)]
drm/amd/display: Use seperate dmcub firmware for navy_flounder
[Why]
Currently navy_flounder is using sienna_cichlid_dmcub.bin.
[How]
Create a seperate define so navy_flounder will use its own firmware.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Tsai [Wed, 15 Jul 2020 03:21:43 +0000 (11:21 +0800)]
drm/amd/display: Check lane status again after link training done
[Why]
Some monitors could suffer symbol unlock but cannot send HPD IRQ to
notic source device to handle link loss. This makes monitor stuck in
abnormal status and causes black screen.
[How]
According to the suggestion from scalar vendor, to check lane status
again after link training done. That can improve the comaptibility
from current production monitors.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Tue, 14 Jul 2020 19:06:40 +0000 (15:06 -0400)]
drm/amd/display: Don't compare dppclk before updating DTO
[Why]
In dcn3_update_clocks there are situations where dppclk is not
lowered (i.e. stays the same), but DTO still needs to be increased
before we program pipe frontend (i.e. in prepare_bandwidth). If we
don't program the new DTO value before we program the pipe,
we will underflow as soon as the pipe lock is released until the
next call to dcn3_update_clocks where the DTO is updated.
[How]
Remove dppclk check before programming new DTO value.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eryk Brol [Tue, 16 Jun 2020 20:29:19 +0000 (16:29 -0400)]
drm/amd/display: Fix naming of DSC Debugfs entry
[why]
Fix naming and return bits rather than bytes per pixel for
naming consistency. Because registers return Bytes per pixel,
but DSC Config structure is expecting bits per pixel as input.
So when returning the value convert from bytes into bits.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eryk Brol [Tue, 16 Jun 2020 20:24:11 +0000 (16:24 -0400)]
drm/amd/display: Rename bytes_pp to the correct bits_pp
[Why]
Struct dcn_dsc_state is used for reading current state
and parameters of DSC on a pipe, the target rate parameter
uses bytes per pixel even though its reading BITS_PER_PIXEL
register.
[How]
Changing it to Bits Per Pixel for consistency.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dmytro Laktyushkin [Mon, 6 Jul 2020 14:54:37 +0000 (10:54 -0400)]
drm/amd/display: Clean up global sync param retrieval
[Why]
This change replaces older looping code in favor of these functions.
[How]
There are built in functions for extracting global sync params
during mode validation now.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Mon, 27 Jul 2020 01:08:22 +0000 (09:08 +0800)]
drm/amd/swsmu: allow asic to handle sensor type by itself
1. allow asic to handle sensor type by itself.
2. if not, use smu common sensor to handle it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Mon, 27 Jul 2020 03:36:18 +0000 (11:36 +0800)]
drm/amdgpu: add support for umc 8.7 ras functions
added support for umc 8.7 error reporting and query
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Fri, 24 Jul 2020 09:24:08 +0000 (17:24 +0800)]
drm/amd/powerplay: update driver if file for sienna_cichlid
Update sienna_cichlid driver if header and related files.
Support new smu metrics for pre & postDS frequency.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Mon, 27 Jul 2020 02:41:44 +0000 (10:41 +0800)]
drm/amdgpu: add umc v8_7_0 IP headers
the change introduces IP headers for unified memory controller (umc)
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 14 Jul 2020 06:25:39 +0000 (14:25 +0800)]
drm/amd/powerplay: revise the outputs layout of amdgpu_pm_info debugfs
The current outputs of amdgpu_pm_info debugfs come with clock gating
status and followed by current clock/power information. However the
clock gating status retrieving may pull GFX out of CG status. That
will make the succeeding clock/power information retrieving inaccurate.
To overcome this and be with minimum impact, the outputs are updated
to show current clock/power information first.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Sat, 25 Jul 2020 13:30:35 +0000 (09:30 -0400)]
Revert "drm/amdgpu/vcn3.0: remove extra asic type check"
This reverts commit
058c07201ec7d373fc6a0a570b38a8a9d62c29fb.
Chip NAVY_FLOUNDER uses vcn3.0, but it has only one VCN instance.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jay Cornwall [Fri, 24 Jul 2020 23:58:48 +0000 (16:58 -0700)]
drm/amdkfd: Fix spurious debug exception on gfx10
s_barrier triggers a debug exception when issued with PRIV=1,
DEBUG_EN=1. This causes spurious notifications to rocm-gdb.
Clear MODE before issuing s_barrier and restore MODE afterwards
in the context restore handler.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Tested-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changfeng [Fri, 24 Jul 2020 05:15:10 +0000 (13:15 +0800)]
drm/amd/powerplay: drop unnecessary message support check(v2)
Take back patch:drop unnecessary message support check
Because the gpu reset fail problem on renoir can be fixed by:
drm/amd/powerplay: skip invalid msg when smu set mp1 state
It needs to remove SWSMU_CODE_LAYER_L1 in smu_cmn.h to guard a clear
code layer.
Signed-off-by: changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mukul Joshi [Fri, 24 Jul 2020 03:09:57 +0000 (23:09 -0400)]
drm/amdkfd: Add thermal throttling SMI event
Add support for reporting thermal throttling events through SMI.
Also, add a counter to count the number of throttling interrupts
observed and report the count in the SMI event message.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dennis Li [Wed, 8 Jul 2020 07:07:13 +0000 (15:07 +0800)]
drm/amdgpu: fix system hang issue during GPU reset
when GPU hang, driver has multi-paths to enter amdgpu_device_gpu_recover,
the atomic adev->in_gpu_reset and hive->in_reset are used to avoid
re-entering GPU recovery.
During GPU reset and resume, it is unsafe that other threads access GPU,
which maybe cause GPU reset failed. Therefore the new rw_semaphore
adev->reset_sem is introduced, which protect GPU from being accessed by
external threads during recovery.
v2:
1. add rwlock for some ioctls, debugfs and file-close function.
2. change to use dqm->is_resetting and dqm_lock for protection in kfd
driver.
3. remove try_lock and change adev->in_gpu_reset as atomic, to avoid
re-enter GPU recovery for the same GPU hang.
v3:
1. change back to use adev->reset_sem to protect kfd callback
functions, because dqm_lock couldn't protect all codes, for example:
free_mqd must be called outside of dqm_lock;
[ 1230.176199] Hardware name: Supermicro SYS-7049GP-TRT/X11DPG-QT, BIOS 3.1 05/23/2019
[ 1230.177221] Call Trace:
[ 1230.178249] dump_stack+0x98/0xd5
[ 1230.179443] amdgpu_virt_kiq_reg_write_reg_wait+0x181/0x190 [amdgpu]
[ 1230.180673] gmc_v9_0_flush_gpu_tlb+0xcc/0x310 [amdgpu]
[ 1230.181882] amdgpu_gart_unbind+0xa9/0xe0 [amdgpu]
[ 1230.183098] amdgpu_ttm_backend_unbind+0x46/0x180 [amdgpu]
[ 1230.184239] ? ttm_bo_put+0x171/0x5f0 [ttm]
[ 1230.185394] ttm_tt_unbind+0x21/0x40 [ttm]
[ 1230.186558] ttm_tt_destroy.part.12+0x12/0x60 [ttm]
[ 1230.187707] ttm_tt_destroy+0x13/0x20 [ttm]
[ 1230.188832] ttm_bo_cleanup_memtype_use+0x36/0x80 [ttm]
[ 1230.189979] ttm_bo_put+0x1be/0x5f0 [ttm]
[ 1230.191230] amdgpu_bo_unref+0x1e/0x30 [amdgpu]
[ 1230.192522] amdgpu_amdkfd_free_gtt_mem+0xaf/0x140 [amdgpu]
[ 1230.193833] free_mqd+0x25/0x40 [amdgpu]
[ 1230.195143] destroy_queue_cpsch+0x1a7/0x270 [amdgpu]
[ 1230.196475] pqm_destroy_queue+0x105/0x260 [amdgpu]
[ 1230.197819] kfd_ioctl_destroy_queue+0x37/0x70 [amdgpu]
[ 1230.199154] kfd_ioctl+0x277/0x500 [amdgpu]
[ 1230.200458] ? kfd_ioctl_get_clock_counters+0x60/0x60 [amdgpu]
[ 1230.201656] ? tomoyo_file_ioctl+0x19/0x20
[ 1230.202831] ksys_ioctl+0x98/0xb0
[ 1230.204004] __x64_sys_ioctl+0x1a/0x20
[ 1230.205174] do_syscall_64+0x5f/0x250
[ 1230.206339] entry_SYSCALL_64_after_hwframe+0x49/0xbe
2. remove try_lock and introduce atomic hive->in_reset, to avoid
re-enter GPU recovery.
v4:
1. remove an unnecessary whitespace change in kfd_chardev.c
2. remove comment codes in amdgpu_device.c
3. add more detailed comment in commit message
4. define a wrap function amdgpu_in_reset
v5:
1. Fix some style issues.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Suggested-by: Luben Tukov <luben.tuikov@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Boyuan Zhang [Fri, 24 Jul 2020 02:34:22 +0000 (22:34 -0400)]
drm/amdgpu: update dec ring test for VCN 3.0
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Colin Ian King [Thu, 23 Jul 2020 14:36:37 +0000 (15:36 +0100)]
drm/amd/display: remove redundant initialization of variable result
The variable result is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Thu, 23 Jul 2020 15:42:33 +0000 (11:42 -0400)]
drm/amdgpu/vcn3.0: remove extra asic type check
vcn ip block is already selected based on ASIC type during set_ip_blocks.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Thu, 23 Jul 2020 15:07:52 +0000 (11:07 -0400)]
drm/amdgpu/jpeg3.0: remove extra asic type check
jpeg ip block is already selected based on ASIC type during set_ip_blocks.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Laurent Morichetti [Mon, 6 Jul 2020 23:13:40 +0000 (16:13 -0700)]
drm/amdkfd: Unify gfx9/gfx10 context save area layouts
Add some padding before the MODE register in the HWREGs block to
preserve the same layout as gfx9. This simplifies implementation of a
user-mode debugger.
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Thu, 23 Jul 2020 12:51:55 +0000 (08:51 -0400)]
drm/amd/amdgpu: Add RLC_CGTT_MGCG_OVERRIDE to gfx 10.3 headers
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Wed, 3 Jun 2020 13:29:27 +0000 (09:29 -0400)]
drm/amdgpu: Remove extra asic type check
vcn ip block is already selected based on ASIC type during set_ip_blocks
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Thu, 4 Jun 2020 16:02:06 +0000 (12:02 -0400)]
drm/amdgpu/jpeg: Remove extra asic type check
jpeg ip block is already selected based on ASIC type during set_ip_blocks.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 17 Jul 2020 02:20:04 +0000 (22:20 -0400)]
drm/amdgpu/powerplay: add some documentation about memory clock
We expose the actual memory controller clock rate in Linux,
not the effective memory clock of the DRAMs. To translate
it, it follows the following formula:
Clock conversion (Mhz):
HBM: effective_memory_clock = memory_controller_clock * 1
G5: effective_memory_clock = memory_controller_clock * 1
G6: effective_memory_clock = memory_controller_clock * 2
DRAM data rate (MT/s):
HBM: effective_memory_clock * 2 = data_rate
G5: effective_memory_clock * 4 = data_rate
G6: effective_memory_clock * 8 = data_rate
Bandwidth (MB/s):
data_rate * vram_bit_width / 8 = memory_bandwidth
Some examples:
G5 on RX460:
memory_controller_clock = 1750 Mhz
effective_memory_clock = 1750 Mhz * 1 = 1750 Mhz
data rate = 1750 * 4 = 7000 MT/s
memory_bandwidth = 7000 * 128 bits / 8 = 112000 MB/s
G6 on RX5600:
memory_controller_clock = 900 Mhz
effective_memory_clock = 900 Mhz * 2 = 1800 Mhz
data rate = 1800 * 8 = 14400 MT/s
memory_bandwidth = 14400 * 192 bits / 8 = 345600 MB/s
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Li Heng [Thu, 23 Jul 2020 03:27:43 +0000 (11:27 +0800)]
drm/amdgpu: Remove redundant NULL check
Fix below warnings reported by coccicheck:
./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c:557:2-7: WARNING: NULL check before some freeing functions is not needed.
Fixes:
4d55b0dd1cdd ("drm/amd/display: Add DCN3 CLK_MGR")
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Thu, 23 Jul 2020 09:38:20 +0000 (17:38 +0800)]
drm/amdgpu: move umc specific macros to header
certain umc macros are common across umc versions
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Thu, 23 Jul 2020 07:26:27 +0000 (15:26 +0800)]
drm/amdgpu: update golden setting for sienna_cichlid
Update golden setting for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Tue, 21 Jul 2020 08:39:45 +0000 (16:39 +0800)]
drm/amd/powerplay: correct smu message for vf mode
Set valid_in_vf to false for the message not support in vf mode on
sienna cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Tue, 21 Jul 2020 05:13:39 +0000 (13:13 +0800)]
drm/amd/powerplay: add msg map for mode1 reset
Mapping Mode1Reset message for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao [Tue, 21 Jul 2020 06:01:53 +0000 (14:01 +0800)]
drm/amd/powerplay: skip invalid msg when smu set mp1 state
Some asic may not support for some message of set mp1 state.
If the return value of smu_send_smc_msg is -EINVAL, that means it failed
to send msg to smc as it can not map an valid message for the ASIC. And
with that case, smu_set_mp1_state should be skipped as those ASIC was in
fact do not support for that.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Wed, 22 Jul 2020 12:38:13 +0000 (14:38 +0200)]
drm/amdgpu/dc: Simplify drm_crtc_state::active checks
drm_atomic_crtc_check enforces that ::active can only be true if
::enable is as well.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Wed, 22 Jul 2020 13:27:35 +0000 (21:27 +0800)]
drm/amd/powerplay: remove the dpm checking in the boot sequence
It's not necessary to retrieve the power features status when the
asic is booted up the first time. This patch can have the features
enablement status still checked in suspend/resume case and removed
from the first boot up sequence.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Wed, 22 Jul 2020 11:36:36 +0000 (07:36 -0400)]
drm/amd/amdgpu: Fix compiler warning in df driver
Fix this warning:
CC [M] drivers/gpu/drm/amd/amdgpu/gfxhub_v1_1.o
In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h:29,
from drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h:26,
from drivers/gpu/drm/amd/amdgpu/amdgpu.h:43,
from drivers/gpu/drm/amd/amdgpu/df_v3_6.c:23:
drivers/gpu/drm/amd/amdgpu/df_v3_6.c: In function ‘df_v3_6_pmc_get_count’:
./include/drm/drm_print.h:487:2: warning: ‘hi_base_addr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
487 | __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:649:25: note: ‘hi_base_addr’ was declared here
649 | uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0;
| ^~~~~~~~~~~~
In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h:29,
from drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h:26,
from drivers/gpu/drm/amd/amdgpu/amdgpu.h:43,
from drivers/gpu/drm/amd/amdgpu/df_v3_6.c:23:
./include/drm/drm_print.h:487:2: warning: ‘lo_base_addr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
487 | __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:649:11: note: ‘lo_base_addr’ was declared here
649 | uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0;
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Tue, 21 Jul 2020 10:08:24 +0000 (18:08 +0800)]
drm/amdgpu: won't include gc and mmhub register headers in GMC block
All gc/mmhub register access and operation should be in gfxhub/mmhub level.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Tue, 21 Jul 2020 10:04:46 +0000 (18:04 +0800)]
drm/amdgpu: move get_invalidate_req function into gfxhub/mmhub level
This patch is to move get_invalidate_req into gfxhub/mmhub level. It will avoid
mismatch of the different gfxhub/mmhub register offsets and fields in the same
gmc block.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Tue, 21 Jul 2020 09:39:26 +0000 (17:39 +0800)]
drm/amdgpu: add vmhub funcs helper (v2)
This patch is to introduce vmhub funcs helper to add following callback
(print_l2_protection_fault_status). Each GC/MMHUB register specific programming
should be in gfxhub/mmhub level.
v2: remove the condition of funcs assignment.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Tue, 21 Jul 2020 06:57:02 +0000 (14:57 +0800)]
drm/amdgpu: abstract set_vm_fault_masks function to refine the programming
This patch is to add set_vm_fault_masks helper to amdgpu_gmc to refine the
original programming.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Tue, 21 Jul 2020 06:24:43 +0000 (14:24 +0800)]
drm/amdgpu: add member to store vm fault interrupt masks
This patch adds a member in vmhub structure to store the vm fault interrupt
masks for different version gfxhubs/mmhubs.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changfeng [Tue, 21 Jul 2020 02:38:19 +0000 (10:38 +0800)]
Revert "drm/amd/powerplay: drop unnecessary message support check"
The below 3 messages are not supported on Renoir
SMU_MSG_PrepareMp1ForShutdown
SMU_MSG_PrepareMp1ForUnload
SMU_MSG_PrepareMp1ForReset
It needs to revert patch:
drm/amd/powerplay: drop unnecessary message support check
to avoid set mp1 state fail during gpu reset on renoir.
Signed-off-by: changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Mon, 20 Jul 2020 03:11:13 +0000 (11:11 +0800)]
drm/amdgpu: add printing after executing page reservation to eeprom
This will tell users if the faulty page has been written to
external eeprom device in dmesg log.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Wed, 22 Jul 2020 01:40:11 +0000 (09:40 +0800)]
drm/amdgpu: expand sienna chichlid reg access support
Added dedicated 64bit reg read/write support
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhanuprakash Modem [Fri, 26 Jun 2020 23:12:42 +0000 (16:12 -0700)]
Revert "drm/amd/display: Expose connector VRR range via debugfs"
v3:
* Rebase (Manasi)
v2:
* Rebase (Manasi)
As both VRR min and max are already part of drm_display_info,
drm can expose this VRR range for each connector.
Hence this logic should move to core DRM.
This reverts commit
727962f030c23422a01e8b22d0f463815fb15ec4.
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: AMD gfx <amd-gfx@lists.freedesktop.org>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Sun, 19 Jul 2020 17:35:29 +0000 (13:35 -0400)]
drm/amdgpu/sienna_cichlid: add SMU i2c support (v2)
Enable SMU i2c bus access for sienna_cichlid asics.
v2: change callback name
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Sun, 19 Jul 2020 17:22:05 +0000 (13:22 -0400)]
drm/amdgpu/navi1x: add SMU i2c support (v2)
Enable SMU i2c bus access for navi1x asics.
v2: add missing implementation
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 17 Jul 2020 13:40:19 +0000 (09:40 -0400)]
drm/amdgpu/swSMU: remove eeprom from the smu i2c handlers (v2)
The driver uses it for EEPROM access, but it's just an i2c bus.
v2: change the callback name as well.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 17 Jul 2020 13:33:54 +0000 (09:33 -0400)]
drm/amdgpu/vega20: enable the smu i2c bus for all boards
There is no longer a ras dependency so it's safe to expose
on all boards.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 17 Jul 2020 13:32:04 +0000 (09:32 -0400)]
drm/amdgpu: remove eeprom from the smu i2c handlers
The driver uses it for EEPROM access, but it's just an i2c bus.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 17 Jul 2020 13:25:38 +0000 (09:25 -0400)]
drm/amdgpu: move i2c bus lock out of ras structure
It's not really ras related. It's just a lock for the
bus in general. This removes the ras dependency from
the smu i2c bus.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Paweł Gronowski [Sun, 19 Jul 2020 15:54:53 +0000 (17:54 +0200)]
drm/amdgpu: Fix NULL dereference in dpm sysfs handlers
NULL dereference occurs when string that is not ended with space or
newline is written to some dpm sysfs interface (for example pp_dpm_sclk).
This happens because strsep replaces the tmp with NULL if the delimiter
is not present in string, which is then dereferenced by tmp[0].
Reproduction example:
sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk'
Signed-off-by: Paweł Gronowski <me@woland.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Qiu Wenbo [Fri, 17 Jul 2020 07:09:57 +0000 (15:09 +0800)]
drm/amd/powerplay: fix a crash when overclocking Vega M
Avoid kernel crash when vddci_control is SMU7_VOLTAGE_CONTROL_NONE and
vddci_voltage_table is empty. It has been tested on Intel Hades Canyon
(i7-8809G).
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208489
Fixes:
ac7822b0026f ("drm/amd/powerplay: add smumgr support for VEGAM (v2)")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jiansong Chen [Tue, 21 Jul 2020 08:39:38 +0000 (16:39 +0800)]
drm/amd/powerplay: retrieve VCN dpm table per instances
To accommodate VCN instances variance, otherwise it may trigger
smu response error for configuration with less instances.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jiansong Chen [Tue, 21 Jul 2020 07:36:19 +0000 (15:36 +0800)]
drm/amd/powerplay: update driver if version for navy_flounder
It's in accordance with pmfw 65.3.0 for navy_flounder.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jiansong Chen [Tue, 21 Jul 2020 04:21:40 +0000 (12:21 +0800)]
drm/amd/powerplay: fix typos for clk map
It should be DCLK1->PPCLK_DCLK_1 and VCLK->PPCLK_VCLK_0.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Thu, 16 Jul 2020 13:56:52 +0000 (09:56 -0400)]
drm/amdgpu/vcn: merge shared memory into vcpu
Merge vcn firmware shared memory bo into vcn vcpu bo.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Thu, 16 Jul 2020 13:47:35 +0000 (09:47 -0400)]
Revert "drm/amdgpu/vcn: add shared memory restore after wake up from sleep."
This reverts commit
21b704d78352c289d31697824ceea7ad0ff4ce59.
To merge vcn firmware shared memory bo into vcn vcpu bo.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 13 Jul 2020 14:07:51 +0000 (10:07 -0400)]
drm/amd/display: 3.2.95
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Igor Kravchenko [Fri, 10 Jul 2020 20:24:30 +0000 (16:24 -0400)]
drm/amd/display: interface to obtain minimum plane size caps
[Why]
Implement an interface to obtain plane size caps
[How]
Add min_width, min_height fields to dc_plane_cap structure.
Set values to 16x16 for discrete ASICs, and 64x64 for others.
Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Fri, 3 Jul 2020 16:37:35 +0000 (12:37 -0400)]
drm/amd/display: Add additional config guards for DCN
[Why&How]
Fix build error by protecting code with config guard
to enable building amdgpu without CONFIG_DRM_AMD_DC_DCN
enabled. This option is disabled by default for allmodconfig.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Fri, 19 Jun 2020 19:31:19 +0000 (15:31 -0400)]
drm/amd/display: Call dsc related functions indirectly via dc interface
[Why&How]
Accessing dcn20_add_dsc_to_stream_resource directly
causes build failure for configuration which has
CONFIG_DRM_AMD_DC_DCN disabled. Fix this by
calling the corresponding function exposed via dc
resource functions.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Naveed Ashfaq [Fri, 10 Jul 2020 20:50:50 +0000 (16:50 -0400)]
drm/amd/display: Improve compatibility by re-ordering info-packets
[why]
On DCN20, Some features would not be activated when ALLM was turned on.
TV seemed to activate only the latest info packet sent, and the ALLM
info packet was sent after the VSIF info packet.
The packet indices was also inconsistent between DCN10 and DCN20.
[how]
Change the packet indices of DCN20 to match those of DCN10.
This makes them consistent and also makes the vendor info packet
be sent after the hfvsif info packet.
Signed-off-by: Naveed Ashfaq <Naveed.Ashfaq@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Fri, 10 Jul 2020 22:17:20 +0000 (18:17 -0400)]
drm/amd/display: [FW Promotion] Release 0.0.25
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Mon, 6 Jul 2020 18:53:57 +0000 (14:53 -0400)]
drm/amd/display: Make new dc interface for adding dsc resource
[Why]
dcn20_add_dsc_to_stream_resource is accessed in amdgpu_dm directly.
This creates build error for configuration with DCN disabled.
[How]
Make the function available through a resource pool function so
that dcn20 function need not be called directly.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Tue, 7 Jul 2020 20:59:31 +0000 (16:59 -0400)]
drm/amd/display: rename dsc extended caps as dsc branch decoder caps
[why]
The capability fields are reserved for DSC branch
only to report the capability related to the
branch's DSC decoder.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Fri, 10 Jul 2020 14:33:05 +0000 (10:33 -0400)]
drm/amd/display: Decouple ABM init from dmcu
[Why]
With ABM implemented on DMUB the ABM enablement
shoudn't be solely rely on dmcu. Otherwise it won't work
if dmcu is disabled.
[How]
1. Decouple dmcub config copy from dmcu iram copy.
2. Set abm connector property if either dmcu or dmub enabled.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reza Amini [Thu, 2 Jul 2020 20:10:31 +0000 (16:10 -0400)]
drm/amd/display: Implement AMD VSIF V3
[Why]
To support V3
[How]
Generate new VSIF for V3
Signed-off-by: Reza Amini <Reza.Amini@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eryk Brol [Tue, 16 Jun 2020 18:19:35 +0000 (14:19 -0400)]
drm/amd/display: Add DSC parameters logging to debugfs
[why]
Need to add new parameters to debugfs logging so
we will know what parameters DSC is using for
debug purposes. So we are adding a read function
in debugfs to read DSC status registers
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Tue, 7 Jul 2020 02:07:46 +0000 (22:07 -0400)]
drm/amd/display: remove unhelpful 5ms delay
[Why]
Scaler vendor confirmed the 5ms was not helpful so no point in keeping
it.
[How]
Revert 5ms delay after setting training pattern.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nirmoy Das [Fri, 10 Jul 2020 14:15:40 +0000 (16:15 +0200)]
drm/amdgpu: do not disable SMU on vm reboot
For passthrough device, we do baco reset after 1st vm boot so
if we disable SMU on 1st VM shutdown baco reset will fail for
2nd vm boot.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chengming Gui [Tue, 14 Jul 2020 08:25:04 +0000 (16:25 +0800)]
drm/amdgpu: add timeout flush mechanism to update wptr for self interrupt (v2)
outstanding log reaches threshold will trigger IH ring1/2's wptr
reported, that will avoid generating interrupts to ring0 too frequent.
But if ring1/2's wptr hasn't been increased for a long time, the outstanding log
can't reach threshold so that driver can't get latest wptr info and
miss some interrupts.
v2: squash in warning fix
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Fri, 17 Jul 2020 06:13:50 +0000 (14:13 +0800)]
drm/amdgpu: enable xgmi support for sienna cichlid
set xgmi support flag suring nv ip init sequence
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Fri, 17 Jul 2020 06:13:30 +0000 (14:13 +0800)]
drm/amdgpu: load asd for sienna cichlid
do not abort psp asd load sequence for sienna cichlid
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 8 Jul 2020 04:45:00 +0000 (12:45 +0800)]
drm/amd/powerplay: tag swSMU code layers
Per designs, the swSMU code is separated into four layers. And the typical
calling flow should be like: amdgpu_smu.c -> ${asic}_ppt.c -> smu_v11/12_0.c
-> smu_cmn.c. Compile errors will come out for any violations. This can
help to prevent cross callings(e.g. amdgpu_smu.c -> ${asic}_ppt.c ->
amdgpu_smu.c -> ${asic}_ppt.c) which were common in our code.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 8 Jul 2020 05:06:04 +0000 (13:06 +0800)]
drm/amd/powerplay: revise the calling flow on OD table update
This can eliminate the cross callings and maintain clear
code layer.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 8 Jul 2020 05:04:08 +0000 (13:04 +0800)]
drm/amd/powerplay: drop unnecessary message support check
These messages are known to be supported by all ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 8 Jul 2020 04:11:59 +0000 (12:11 +0800)]
drm/amd/powerplay: move SMC message issuing APIs to smu_cmn.c
Considering they can be shared by all ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 8 Jul 2020 03:17:02 +0000 (11:17 +0800)]
drm/amd/powerplay: update the tables init related
To avoid cross calling and maintain clear code layer.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 7 Jul 2020 08:18:55 +0000 (16:18 +0800)]
drm/amd/powerplay: move table setting common code to smu_cmn.c
As they are shared by all ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 7 Jul 2020 07:52:39 +0000 (15:52 +0800)]
drm/amd/powerplay: maximum code sharing around watermarks setting
Maximum code sharing.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 7 Jul 2020 06:49:45 +0000 (14:49 +0800)]
drm/amd/powerplay: move more APIs to smu_cmn.c
Considering they are shared by all ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 7 Jul 2020 03:41:29 +0000 (11:41 +0800)]
drm/amd/powerplay: common API for disabling all features with exception
We are moving to centralize all feature enablement/support checking and
setting APIs in smu_cmn.c.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 7 Jul 2020 06:06:40 +0000 (14:06 +0800)]
drm/amd/powerplay: move ppfeature mask setting to smu_cmn.c
Considering they are shared by all ASICs. And we are moving
to centralize all feature enablement/support checking and
setting APIs in smu_cmn.c.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 7 Jul 2020 03:48:06 +0000 (11:48 +0800)]
drm/amd/powerplay: implement smu_cmn_get_enabled_mask() for all ASICs
Instead of having each for smu v11 and v12.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 7 Jul 2020 03:10:39 +0000 (11:10 +0800)]
drm/amd/powerplay: move dpm feature enablement checking to smu_cmn.c
Considering it is shared by all ASICs and smu_cmn.c should be
the right place.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 7 Jul 2020 02:18:02 +0000 (10:18 +0800)]
drm/amd/powerplay: move dpm feature support checking to smu_cmn.c
Considering it is shared by all ASICs and smu_cmn.c should be
the right place.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 7 Jul 2020 02:24:31 +0000 (10:24 +0800)]
drm/amd/powerplay: move clock dpm enablement check to smu_v11/v12
As those APIs of smu_v11/v12 are more widely called. And they
need this check also.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 6 Jul 2020 08:18:57 +0000 (16:18 +0800)]
drm/amd/powerplay: drop unused code
Those code were obsoleted by new common API
smu_cmn_to_asic_specific_index().
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 6 Jul 2020 08:11:31 +0000 (16:11 +0800)]
drm/amd/powerplay: unify swSMU index to asic specific index mapping
By this we can drop redundant code.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 6 Jul 2020 03:03:00 +0000 (11:03 +0800)]
drm/amd/powerplay: widely share the API for data table retrieving
Considering the data table retrieving can be more widely shared,
amdgpu_atombios.c is the right place.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jinzhou.Su [Tue, 7 Jul 2020 10:52:18 +0000 (18:52 +0800)]
drm/amdgpu: add read amdgpu_gfxoff status in debugfs
Add interface for SMU12 device, used by UMR.
v2: fix code style
Signed-off-by: Jinzhou.Su <Jinzhou.Su@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Thu, 16 Jul 2020 17:44:08 +0000 (13:44 -0400)]
drm/amdgpu: load ta firmware for sienna cichlid
call psp_int_ta_microcode() to parse the ta firmware.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 15 Jul 2020 06:01:29 +0000 (14:01 +0800)]
drm/amd/powerplay: suppress compile error around BUG_ON
To suppress the compile error below for "ARCH=arc".
drivers/gpu/drm/amd/amdgpu/../powerplay/arcturus_ppt.c: In function 'arcturus_fill_eeprom_i2c_req':
>> arch/arc/include/asm/bug.h:22:2: error: implicit declaration of function 'pr_warn'; did you mean 'pci_warn'? [-Werror=implicit-function-declaration]
22 | pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
| ^~~~~~~
include/asm-generic/bug.h:62:57: note: in expansion of macro 'BUG'
62 | #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
| ^~~
drivers/gpu/drm/amd/amdgpu/../powerplay/arcturus_ppt.c:2157:2: note: in expansion of macro 'BUG_ON'
2157 | BUG_ON(numbytes > MAX_SW_I2C_COMMANDS);
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 21 Jul 2020 19:31:52 +0000 (15:31 -0400)]
drm/amdgpu/smu11: drop code chuck that got accidently re-added
Seems to be due to a bad merge. Code was originally added in
commit
5aaa8fff3aa950 ("drm/amd/powerplay: unload mp1 for Arcturus RAS baco reset")
but later removed in commit
7f70443fd83407 ("drm/amdgpu: set mp1 state before reload").
but is back again.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Tue, 19 May 2020 20:48:43 +0000 (16:48 -0400)]
drm/amd/amdkfd: Fix large framesize for kfd_smi_ev_read()
The buffer allocated is of 1024 bytes. Allocate this from
heap instead of stack.
Also remove check for stack size since we're allocating from heap
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Amber Lin [Mon, 20 Apr 2020 23:42:46 +0000 (19:42 -0400)]
include/uapi/linux: Update KFD ioctl version
Bump KFD ioctl after adding SMI events support
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Amber Lin [Wed, 13 May 2020 12:19:29 +0000 (08:19 -0400)]
drm/amdkfd: Provide SMI events watch
When the compute is malfunctioning or performance drops, the system admin
will use SMI (System Management Interface) tool to monitor/diagnostic what
went wrong. This patch provides an event watch interface for the user
space to register devices and subscribe events they are interested. After
registered, the user can use annoymous file descriptor's poll function
with wait-time specified and wait for events to happen. Once an event
happens, the user can use read() to retrieve information related to the
event.
VM fault event is done in this patch.
v2: - remove UNREGISTER and add event ENABLE/DISABLE
- correct kfifo usage
- move event message API to kfd_ioctl.h
v3: send the event msg in text than in binary
v4: support multiple clients
v5: move events enablement from ioctl to fd write
v6: sparse fix
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>