selftests: firmware: Fix it to do root uid check and skip

[ Upstream commit c65e41538b04e0d64a673828745a00cb68a24371 ]

firmware attempts to load test modules that require root access
and fail. Fix it to check for root uid and exit with skip code
instead.

Before this fix:

selftests: firmware: fw_run_tests.sh
modprobe: ERROR: could not insert 'test_firmware': Operation not permitted
You must have the following enabled in your kernel:
CONFIG_TEST_FIRMWARE=y
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
not ok 1 selftests: firmware: fw_run_tests.sh # SKIP

With this fix:

selftests: firmware: fw_run_tests.sh
skip all tests: must be run as root
not ok 1 selftests: firmware: fw_run_tests.sh # SKIP

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviwed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libcxgbi: fix NULL pointer dereference in cxgbi_device_destroy()

[ Upstream commit 71482fde704efdd8c3abe0faf34d922c61e8d76b ]

If cxgb4i_ddp_init() fails then cdev->cdev2ppm will be NULL, so add a check
for NULL pointer before dereferencing it.

Link: https://lore.kernel.org/r/1576676731-3068-1-git-send-email-varun@chelsio.com
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: mpc8xxx: Add platform device to gpiochip->parent

[ Upstream commit 322f6a3182d42df18059a89c53b09d33919f755e ]

Dear Linus Walleij,

In old kernels, some APIs still try to use parent->of_node from struct gpio_chip,
and it could be resulted in kernel panic because parent is NULL. Adding platform
device to gpiochip->parent can fix this problem.

Signed-off-by: Johnson Chen <johnsonch.chen@moxa.com>
Link: https://patchwork.kernel.org/patch/11234609
Link: https://lore.kernel.org/r/HK0PR01MB3521489269F76467DFD7843FFA450@HK0PR01MB3521.apcprd01.prod.exchangelabs.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: brcmstb-waketimer: add missed clk_disable_unprepare

commit 94303f8930ed78aea0f189b703c9d79fff9555d7 upstream.

This driver forgets to disable and unprepare clock when remove.
Add a call to clk_disable_unprepare to fix it.

Fixes: c4f07ecee22e ("rtc: brcmstb-waketimer: Add Broadcom STB wake-timer")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20191105160043.20018-1-hslester96@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: msm6242: Fix reading of 10-hour digit

commit e34494c8df0cd96fc432efae121db3212c46ae48 upstream.

The driver was reading the wrong register as the 10-hour digit due to
a misplaced ')'. It was in fact reading the 1-second digit register due
to this bug.

Also remove the use of a magic number for the hour mask and use the define
for it which was already present.

Fixes: 4f9b9bba1dd1 ("rtc: Add an RTC driver for the Oki MSM6242")
Tested-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Link: https://lore.kernel.org/r/20191116110548.8562-1-jongk@linux-m68k.org
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix potential overflow

commit 1f0d5c911b64165c9754139a26c8c2fad352c132 upstream.

We expect 64-bit calculation result from below statement, however
in 32-bit machine, looped left shift operation on pgoff_t type
variable may cause overflow issue, fix it by forcing type cast.

page->index << PAGE_SHIFT;

Fixes: 26de9b117130 ("f2fs: avoid unnecessary updating inode during fsync")
Fixes: 0a2aa8fbb969 ("f2fs: refactor __exchange_data_block for speed up")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: Remove unnecessary NULL check in rtl_regd_init

commit 091c6e9c083f7ebaff00b37ad13562d51464d175 upstream.

When building with Clang + -Wtautological-pointer-compare:

drivers/net/wireless/realtek/rtlwifi/regd.c:389:33: warning: comparison
of address of 'rtlpriv->regd' equal to a null pointer is always false
[-Wtautological-pointer-compare]
        if (wiphy == NULL || &rtlpriv->regd == NULL)
                              ~~~~~~~~~^~~~    ~~~~
1 warning generated.

The address of an array member is never NULL unless it is the first
struct member so remove the unnecessary check. This was addressed in
the staging version of the driver in commit f986978b32b3 ("Staging:
rtlwifi: remove unnecessary NULL check").

While we are here, fix the following checkpatch warning:

CHECK: Comparison to NULL could be written "!wiphy"
35: FILE: drivers/net/wireless/realtek/rtlwifi/regd.c:389:
+       if (wiphy == NULL)

Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Link:https://github.com/ClangBuiltLinux/linux/issues/750
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: atmel: fix handling of cs_change set on non-last xfer

commit fed8d8c7a6dc2a76d7764842853d81c770b0788e upstream.

The driver does the wrong thing when cs_change is set on a non-last
xfer in a message.  When cs_change is set, the driver deactivates the
CS and leaves it off until a later xfer again has cs_change set whereas
it should be briefly toggling CS off and on again.

This patch brings the behaviour of the driver back in line with the
documentation and common sense.  The delay of 10 us is the same as is
used by the default spi_transfer_one_message() function in spi.c.
[gregory: rebased on for-5.5 from spi tree]
Fixes: 8090d6d1a415 ("spi: atmel: Refactor spi-atmel to use SPI framework queue")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20191018153504.4249-1-gregory.clement@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: fix silent truncation in spi_nor_read_raw()

commit 3d63ee5deb466fd66ed6ffb164a87ce36425cf36 upstream.

spi_nor_read_raw() assigns the result of 'ssize_t spi_nor_read_data()'
to the 'int ret' variable, while 'ssize_t' is a 64-bit type and *int*
is a 32-bit type on the 64-bit machines. This silent truncation isn't
really valid, so fix up the variable's type.

Fixes: f384b352cbf0 ("mtd: spi-nor: parse Serial Flash Discoverable Parameters (SFDP) tables")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: fix silent truncation in spi_nor_read()

commit a719a75a7761e4139dd099330d9fe3589d844f9b upstream.

spi_nor_read() assigns the result of 'ssize_t spi_nor_read_data()'
to the 'int ret' variable, while 'ssize_t' is a 64-bit type and *int*
is a 32-bit type on the 64-bit machines. This silent truncation isn't
really valid, so fix up the variable's type.

Fixes: 59451e1233bd ("mtd: spi-nor: change return value of read/write")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/mediatek: Correct the flush_iotlb_all callback

commit 2009122f1d83dd8375572661961eab1e7e86bffe upstream.

Use the correct tlb_flush_all instead of the original one.

Fixes: 4d689b619445 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: exynos4-is: Fix recursive locking in isp_video_release()

commit 704c6c80fb471d1bb0ef0d61a94617d1d55743cd upstream.

>From isp_video_release(), &isp->video_lock is held and subsequent
vb2_fop_release() tries to lock vdev->lock which is same with the
previous one. Replace vb2_fop_release() with _vb2_fop_release() to
fix the recursive locking.

Fixes: 1380f5754cb0 ("[media] videobuf2: Add missing lock held on vb2_fop_release")
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l: cadence: Fix how unsued lanes are handled in 'csi2rx_start()'

commit 2eca8e4c1df4864b937752c3aa2f7925114f4806 upstream.

The 2nd parameter of 'find_first_zero_bit()' is a number of bits, not of
bytes. So use 'csi2rx->max_lanes' instead of 'sizeof(lanes_used)'.

Fixes: 1fc3b37f34f6 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: rcar-vin: Fix incorrect return statement in rvin_try_format()

commit a0862a40364e2f87109317e31c51c9d7bc89e33f upstream.

While refactoring code the return statement became corrupted, fix it by
returning the correct return code.

Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Fixes: 897e371389e77514 ("media: rcar-vin: simplify how formats are set and reset"
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ov6650: Fix .get_fmt() V4L2_SUBDEV_FORMAT_TRY support

commit 39034bb0c26b76a2c3abc54aa28c185f18b40c2f upstream.

Commit da298c6d98d5 ("[media] v4l2: replace video op g_mbus_fmt by pad
op get_fmt") converted a former ov6650_g_fmt() video operation callback
to an ov6650_get_fmt() pad operation callback.  However, the converted
function disregards a format->which flag that pad operations should
obey and always returns active frame format settings.

That can be fixed by always responding to V4L2_SUBDEV_FORMAT_TRY with
-EINVAL, or providing the response from a pad config argument, likely
updated by a former user call to V4L2_SUBDEV_FORMAT_TRY .set_fmt().
Since implementation of the latter is trivial, go for it.

Fixes: da298c6d98d5 ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ov6650: Fix some format attributes not under control

commit 1c6a2b63095154bbf9e8f38d79487a728331bf65 upstream.

User arguments passed to .get/set_fmt() pad operation callbacks may
contain unsupported values.  The driver takes control over frame size
and pixel code as well as colorspace and field attributes but has never
cared for remainig format attributes, i.e., ycbcr_enc, quantization
and xfer_func, introduced by commit 11ff030c7365 ("[media]
v4l2-mediabus: improve colorspace support").  Fix it.

Set up a static v4l2_mbus_framefmt structure with attributes
initialized to reasonable defaults and use it for updating content of
user provided arguments.  In case of V4L2_SUBDEV_FORMAT_ACTIVE,
postpone frame size update, now performed from inside ov6650_s_fmt()
helper, util the user argument is first updated in ov6650_set_fmt() with
default frame format content.  For V4L2_SUBDEV_FORMAT_TRY, don't copy
all attributes to pad config, only those handled by the driver, then
fill the response with the default frame format updated with resulting
pad config format code and frame size.

Fixes: 11ff030c7365 ("[media] v4l2-mediabus: improve colorspace support")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ov6650: Fix incorrect use of JPEG colorspace

commit 12500731895ef09afc5b66b86b76c0884fb9c7bf upstream.

Since its initial submission, the driver selects V4L2_COLORSPACE_JPEG
for supported formats other than V4L2_MBUS_FMT_SBGGR8_1X8.  According
to v4l2-compliance test program, V4L2_COLORSPACE_JPEG applies
exclusively to V4L2_PIX_FMT_JPEG.  Since the sensor does not support
JPEG format, fix it to always select V4L2_COLORSPACE_SRGB.

Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: pch_uart: correct usage of dma_unmap_sg

commit 74887542fdcc92ad06a48c0cca17cdf09fc8aa00 upstream.

Per Documentation/DMA-API-HOWTO.txt,
To unmap a scatterlist, just call:
dma_unmap_sg(dev, sglist, nents, direction);

.. note::

The 'nents' argument to the dma_unmap_sg call must be
the _same_ one you passed into the dma_map_sg call,
it should _NOT_ be the 'count' value _returned_ from the
dma_map_sg call.

However in the driver, priv->nent is directly assigned with value
returned from dma_map_sg, and dma_unmap_sg use priv->nent for unmap,
this breaks the API usage.

So introduce a new entry orig_nent to remember 'nents'.

Fixes: da3564ee027e ("pch_uart: add multi-scatter processing")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1573623259-6339-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: imx: use the sg count from dma_map_sg

commit 596fd8dffb745afcebc0ec6968e17fe29f02044c upstream.

The dmaengine_prep_slave_sg needs to use sg count returned
by dma_map_sg, not use sport->dma_tx_nents, because the return
value of dma_map_sg is not always same with "nents".

Fixes: b4cdc8f61beb ("serial: imx: add DMA support for imx6q")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1573108875-26530-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv: Disable native PCIe port management

commit 9d72dcef891030545f39ad386a30cf91df517fb2 upstream.

On PowerNV the PCIe topology is (currently) managed by the powernv platform
code in Linux in cooperation with the platform firmware. Linux's native
PCIe port service drivers operate independently of both and this can cause
problems.

The main issue is that the portbus driver will conflict with the platform
specific hotplug driver (pnv_php) over ownership of the MSI used to notify
the host when a hotplug event occurs. The portbus driver claims this MSI on
behalf of the individual port services because the same interrupt is used
for hotplug events, PMEs (on root ports), and link bandwidth change
notifications. The portbus driver will always claim the interrupt even if
the individual port service drivers, such as pciehp, are compiled out.

The second, bigger, problem is that the hotplug port service driver
fundamentally does not work on PowerNV. The platform assumes that all
PCI devices have a corresponding arch-specific handle derived from the DT
node for the device (pci_dn) and without one the platform will not allow
a PCI device to be enabled. This problem is largely due to historical
baggage, but it can't be resolved without significant re-factoring of the
platform PCI support.

We can fix these problems in the interim by setting the
"pcie_ports_disabled" flag during platform initialisation. The flag
indicates the platform owns the PCIe ports which stops the portbus driver
from being registered.

This does have the side effect of disabling all port services drivers
that is: AER, PME, BW notifications, hotplug, and DPC. However, this is
not a huge disadvantage on PowerNV since these services are either unused
or handled through other means.

Fixes: 66725152fb9f ("PCI/hotplug: PowerPC PowerNV PCI hotplug driver")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191118065553.30362-1-oohall@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/PTM: Remove spurious "d" from granularity message

commit 127a7709495db52a41012deaebbb7afc231dad91 upstream.

The granularity message has an extra "d":

  pci 0000:02:00.0: PTM enabled, 4dns granularity

Remove the "d" so the message is simply "PTM enabled, 4ns granularity".

Fixes: 8b2ec318eece ("PCI: Add PTM clock granularity information")
Link: https://lore.kernel.org/r/20191106222420.10216-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Cc: Jonathan Yong <jonathan.yong@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: dwc: Fix find_next_bit() usage

commit 1137e61dcb99f7f8b54e77ed83f68b5b485a3e34 upstream.

find_next_bit() takes a parameter of size long, and performs arithmetic
that assumes that the argument is of size long.

Therefore we cannot pass a u32, since this will cause find_next_bit()
to read outside the stack buffer and will produce the following print:
BUG: KASAN: stack-out-of-bounds in find_next_bit+0x38/0xb0

Fixes: 1b497e6493c4 ("PCI: dwc: Fix uninitialized variable in dw_handle_msi_irq()")
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compat_ioctl: handle SIOCOUTQNSD

commit 9d7bf41fafa5b5ddd4c13eb39446b0045f0a8167 upstream.

Unlike the normal SIOCOUTQ, SIOCOUTQNSD was never handled in compat
mode. Add it to the common socket compat handler along with similar
ones.

Fixes: 2f4e1b397097 ("tcp: ioctl type SIOCOUTQNSD returns amount of data not sent")
Cc: Eric Dumazet <edumazet@google.com>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

af_unix: add compat_ioctl support

commit 5f6beb9e0f633f3cc845cdd67973c506372931b4 upstream.

The af_unix protocol family has a custom ioctl command (inexplicibly
based on SIOCPROTOPRIVATE), but never had a compat_ioctl handler for
32-bit applications.

Since all commands are compatible here, add a trivial wrapper that
performs the compat_ptr() conversion for SIOCOUTQ/SIOCINQ.  SIOCUNIXFILE
does not use the argument, but it doesn't hurt to also use compat_ptr()
here.

Fixes: ba94f3088b79 ("unix: add ioctl to open a unix socket file with O_PATH")
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: apq8096-db820c: Increase load on l21 for SDCARD

commit e38161bd325ea541ef2f258d8e28281077dde524 upstream.

In the same way as for msm8974-hammerhead, l21 load, used for SDCARD
VMMC, needs to be increased in order to prevent any voltage drop issues
(due to limited current) happening with some SDCARDS or during specific
operations (e.g. write).

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 660a9763c6a9 (arm64: dts: qcom: db820c: Add pm8994 regulator node)
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sd: enable compat ioctls for sed-opal

commit 142b2ac82e31c174936c5719fa12ae28f51a55b7 upstream.

The sed_ioctl() function is written to be compatible between
32-bit and 64-bit processes, however compat mode is only
wired up for nvme, not for sd.

Add the missing call to sed_ioctl() in sd_compat_ioctl().

Fixes: d80210f25ff0 ("sd: add support for TCG OPAL self encrypting disks")
Cc: linux-scsi@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: lewisburg: Update pin list according to v1.1v6

commit e66ff71fd0dba36a53f91f39e4da6c7b84764f2e upstream.

Version 1.1v6 of pin list has some changes in pin names for Intel Lewisburg.

Update the driver accordingly.

Note, it reveals the bug in the driver that misses two pins in GPP_L and
has rather two extra ones. That's why the ordering of some groups is changed.

Fixes: e480b745386e ("pinctrl: intel: Add Intel Lewisburg GPIO support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20191120133739.54332-1-andriy.shevchenko@linux.intel.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctl: ti: iodelay: fix error checking on pinctrl_count_index_with_args call

commit 5ff8aca906f3a7a7db79fad92f2a4401107ef50d upstream.

The call to pinctrl_count_index_with_args checks for a -EINVAL return
however this function calls pinctrl_get_list_and_count and this can
return -ENOENT. Rather than check for a specific error, fix this by
checking for any error return to catch the -ENOENT case.

Addresses-Coverity: ("Improper use of negative")
Fixes: 003910ebc83b ("pinctrl: Introduce TI IOdelay configuration driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190920122030.14340-1-colin.king@canonical.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume

commit e21be0d1d7bd7f78a77613f6bcb6965e72b22fc1 upstream.

Save and restore top PLL related configuration registers for big (APLL)
and LITTLE (KPLL) cores during suspend/resume cycle. So far, CPU clocks
were reset to default values after suspend/resume cycle and performance
after system resume was affected when performance governor has been selected.

Fixes: 773424326b51 ("clk: samsung: exynos5420: add more registers to restore list")
Signed-off-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: fix modalias documentation

commit 73668309215285366c433489de70d31362987be9 upstream.

mei client bus added the client protocol version to the device alias,
but ABI documentation was not updated.

Fixes: b26864cad1c9 (mei: bus: add client protocol version to the device alias)
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191008005735.12707-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: adis16480: assign bias value only if operation succeeded

commit 9b742763d9d4195e823ae6ece760c9ed0500c1dc upstream.

This was found only after the whole thing with the inline functions, but
the compiler actually found something. The value of the `bias` (in
adis16480_get_calibbias()) should only be set if the read operation was
successful.

No actual known problem occurs as users of this function all
ultimately check the return value.  Hence probably not stable material.

Fixes: 2f3abe6cbb6c9 ("iio:imu: Add support for the ADIS16480 and similar IMUs")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn

commit 5326de9e94bedcf7366e7e7625d4deb8c1f1ca8a upstream.

If nfs4_delegreturn_prepare needs to wait for a layoutreturn to complete
then make sure we drop the sequence slot if we hold it.

Fixes: 1c5bd76d17cc ("pNFS: Enable layoutreturn operation for return-on-close")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv2: Fix a typo in encode_sattr()

commit ad97a995d8edff820d4238bd0dfc69f440031ae6 upstream.

Encode the mtime correctly.

Fixes: 95582b0083883 ("vfs: change inode times to use struct timespec64")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: virtio - implement missing support for output IVs

commit 500e6807ce93b1fdc7d5b827c5cc167cc35630db upstream.

In order to allow for CBC to be chained, which is something that the
CTS template relies upon, implementations of CBC need to pass the
IV to be used for subsequent invocations via the IV buffer. This was
not implemented yet for virtio-crypto so implement it now.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xprtrdma: Fix completion wait during device removal

commit 13cb886c591f341a8759f175292ddf978ef903a1 upstream.

I've found that on occasion, "rmmod <dev>" will hang while if an NFS
is under load.

Ensure that ri_remove_done is initialized only just before the
transport is woken up to force a close. This avoids the completion
possibly getting initialized again while the CM event handler is
waiting for a wake-up.

Fixes: bebd031866ca ("xprtrdma: Support unplugging an HCA from under an NFS mount")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: GPD pocket fan: Use default values when wrong modparams are given

commit 6ae01050e49f0080ae30575d9b45a6d4a3d7ee23 upstream.

Use our default values when wrong module-parameters are given, instead of
refusing to load. Refusing to load leaves the fan at the BIOS default
setting, which is "Off". The CPU's thermal throttling should protect the
system from damage, but not-loading is really not the best fallback in this
case.

This commit fixes this by re-setting module-parameter values to their
defaults if they are out of range, instead of failing the probe with
-EINVAL.

Cc: stable@vger.kernel.org
Cc: Jason Anderson <jasona.594@gmail.com>
Reported-by: Jason Anderson <jasona.594@gmail.com>
Fixes: 594ce6db326e ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0

commit 176a7fca81c5090a7240664e3002c106d296bf31 upstream.

Some of ASUS laptops like UX431FL keyboard backlight cannot be set to
brightness 0. According to ASUS' information, the brightness should be
0x80 ~ 0x83. This patch fixes it by following the logic.

Fixes: e9809c0b9670 ("asus-wmi: add keyboard backlight support")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI

commit 465f4edaecc6c37f81349233e84d46246bcac11a upstream.

If an attached disk with protection information enabled is reformatted
to Type 0 the revalidation code does not clear the original protection
type and subsequent accesses will keep setting RDPROTECT/WRPROTECT.

Set the protection type to 0 if the disk reports PROT_EN=0 in READ
CAPACITY(16).

[mkp: commit desc]

Fixes: fe542396da73 ("[SCSI] sd: Ensure we correctly disable devices with unknown protection type")
Link: https://lore.kernel.org/r/1578532344-101668-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: enclosure: Fix stale device oops with hot replug

commit 529244bd1afc102ab164429d338d310d5d65e60d upstream.

Doing an add/remove/add on a SCSI device in an enclosure leads to an oops
caused by poisoned values in the enclosure device list pointers.  The
reason is because we are keeping the enclosure device across the enclosed
device add/remove/add but the current code is doing a
device_add/device_del/device_add on it.  This is the wrong thing to do in
sysfs, so fix it by not doing a device_del on the enclosure device simply
because of a hot remove of the drive in the slot.

[mkp: added missing email addresses]

Fixes: 43d8eb9cfd0a ("[SCSI] ses: add support for enclosure component hot removal")
Link: https://lore.kernel.org/r/1578532892.3852.10.camel@HansenPartnership.com
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reported-by: Luo Jiaxing <luojiaxing@huawei.com>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/srpt: Report the SCSI residual to the initiator

commit e88982ad1bb12db699de96fbc07096359ef6176c upstream.

The code added by this patch is similar to the code that already exists in
ibmvscsis_determine_resid(). This patch has been tested by running the
following command:

strace sg_raw -r 1k /dev/sdb 12 00 00 00 60 00 -o inquiry.bin |&
    grep resid=

Link: https://lore.kernel.org/r/20191105214632.183302-1-bvanassche@acm.org
Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/mlx5: Return proper error value

commit 546d30099ed204792083f043cd7e016de86016a3 upstream.

Returned value from mlx5_mr_cache_alloc() is checked to be error or real
pointer. Return proper error code instead of NULL which is not checked
later.

Fixes: 81713d3788d2 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20191029055721.7192-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: simplify inode locking for RWF_NOWAIT

commit 9cf35f673583ccc9f3e2507498b3079d56614ad3 upstream.

This is similar to 942491c9e6d6 ("xfs: fix AIM7 regression"). Apparently
our current rwsem code doesn't like doing the trylock, then lock for
real scheme. This causes extra contention on the lock and can be
measured eg. by AIM7 benchmark.  So change our read/write methods to
just do the trylock for the RWF_NOWAIT case.

Fixes: edf064e7c6fe ("btrfs: nowait aio support")
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: fix incrementing the page pointer for huge pages

commit 453393369dc9806d2455151e329c599684762428 upstream.

When we increment the counter we need to increment the pointer as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: e16858a7e6e7 drm/ttm: fix start page for huge page check in ttm_put_pages()
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: fix start page for huge page check in ttm_put_pages()

commit ac1e516d5a4c56bf0cb4a3dfc0672f689131cfd4 upstream.

The first page entry is always the same with itself.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

afs: Fix missing cell comparison in afs_test_super()

commit 106bc79843c3c6f4f00753d1f46e54e815f99377 upstream.

Fix missing cell comparison in afs_test_super().  Without this, any pair
volumes that have the same volume ID will share a superblock, no matter the
cell, unless they're in different network namespaces.

Normally, most users will only deal with a single cell and so they won't
see this.  Even if they do look into a second cell, they won't see a
problem unless they happen to hit a volume with the same ID as one they've
already got mounted.

Before the patch:

    # ls /afs/grand.central.org/archive
    linuxdev/  mailman/  moin/  mysql/  pipermail/  stage/  twiki/
    # ls /afs/kth.se/
    linuxdev/  mailman/  moin/  mysql/  pipermail/  stage/  twiki/
    # cat /proc/mounts | grep afs
    none /afs afs rw,relatime,dyn,autocell 0 0
    #grand.central.org:root.cell /afs/grand.central.org afs ro,relatime 0 0
    #grand.central.org:root.archive /afs/grand.central.org/archive afs ro,relatime 0 0
    #grand.central.org:root.archive /afs/kth.se afs ro,relatime 0 0

After the patch:

    # ls /afs/grand.central.org/archive
    linuxdev/  mailman/  moin/  mysql/  pipermail/  stage/  twiki/
    # ls /afs/kth.se/
    admin/        common/  install/  OldFiles/  service/  system/
    bakrestores/  home/    misc/     pkg/       src/      wsadmin/
    # cat /proc/mounts | grep afs
    none /afs afs rw,relatime,dyn,autocell 0 0
    #grand.central.org:root.cell /afs/grand.central.org afs ro,relatime 0 0
    #grand.central.org:root.archive /afs/grand.central.org/archive afs ro,relatime 0 0
    #kth.se:root.cell /afs/kth.se afs ro,relatime 0 0

Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Carsten Jacobi <jacobi@de.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
cc: Todd DeSantis <atd@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Adjust indentation in smb2_open_file

commit 7935799e041ae10d380d04ea23868240f082bd11 upstream.

Clang warns:

../fs/cifs/smb2file.c:70:3: warning: misleading indentation; statement
is not part of the previous 'if' [-Wmisleading-indentation]
         if (oparms->tcon->use_resilient) {
         ^
../fs/cifs/smb2file.c:66:2: note: previous statement is here
        if (rc)
        ^
1 warning generated.

This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.

Fixes: 592fafe644bf ("Add resilienthandles mount parm")
Link: https://github.com/ClangBuiltLinux/linux/issues/826
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: Fix vnicc_is_in_use if rx_bcast not set

commit e8a66d800471e2df7f0b484e2e46898b21d1fa82 upstream.

Symptom: After vnicc/rx_bcast has been manually set to 0,
bridge_* sysfs parameters can still be set or written.
Only occurs on HiperSockets, as OSA doesn't support changing rx_bcast.

Vnic characteristics and bridgeport settings are mutually exclusive.
rx_bcast defaults to 1, so manually setting it to 0 should disable
bridge_* parameters.

Instead it makes sense here to check the supported mask. If the card
does not support vnicc at all, bridge commands are always allowed.

Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix false reporting of VNIC CHAR config failure

commit 68c57bfd52836e31bff33e5e1fc64029749d2c35 upstream.

Symptom: Error message "Configuring the VNIC characteristics failed"
in dmesg whenever an OSA interface on z15 is set online.

The VNIC characteristics get re-programmed when setting a L2 device
online. This follows the selected 'wanted' characteristics - with the
exception that the INVISIBLE characteristic unconditionally gets
switched off.

For devices that don't support INVISIBLE (ie. OSA), the resulting
IO failure raises a noisy error message
("Configuring the VNIC characteristics failed").
For IQD, INVISIBLE is off by default anyways.

So don't unnecessarily special-case the INVISIBLE characteristic, and
thereby suppress the misleading error message on OSA devices.

Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hsr: reset network header when supervision frame is created

commit 3ed0a1d563903bdb4b4c36c58c4d9c1bcb23a6e6 upstream.

The supervision frame is L2 frame.
When supervision frame is created, hsr module doesn't set network header.
If tap routine is enabled, dev_queue_xmit_nit() is called and it checks
network_header. If network_header pointer wasn't set(or invalid),
it resets network_header and warns.
In order to avoid unnecessary warning message, resetting network_header
is needed.

Test commands:
    ip netns add nst
    ip link add veth0 type veth peer name veth1
    ip link add veth2 type veth peer name veth3
    ip link set veth1 netns nst
    ip link set veth3 netns nst
    ip link set veth0 up
    ip link set veth2 up
    ip link add hsr0 type hsr slave1 veth0 slave2 veth2
    ip a a 192.168.100.1/24 dev hsr0
    ip link set hsr0 up
    ip netns exec nst ip link set veth1 up
    ip netns exec nst ip link set veth3 up
    ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3
    ip netns exec nst ip a a 192.168.100.2/24 dev hsr1
    ip netns exec nst ip link set hsr1 up
    tcpdump -nei veth0

Splat looks like:
[  175.852292][    C3] protocol 88fb is buggy, dev veth0

Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: Fix error message on out-of-range GPIO in lookup table

commit d935bd50dd14a7714cbdba9a76435dbb56edb1ae upstream.

When a GPIO offset in a lookup table is out-of-range, the printed error
message (1) does not include the actual out-of-range value, and (2)
contains an off-by-one error in the upper bound.

Avoid user confusion by also printing the actual GPIO offset, and
correcting the upper bound of the range.
While at it, use "%u" for unsigned int.

Sample impact:

    -requested GPIO 0 is out of range [0..32] for chip e6052000.gpio
    +requested GPIO 0 (45) is out of range [0..31] for chip e6052000.gpio

Fixes: 2a3cf6a3599e9015 ("gpiolib: return -ENOENT if no GPIO mapping exists")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191127095919.4214-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu: Remove device link to group on failure

commit 7d4e6ccd1fb09dbfbc49746ca82bd5c25ad4bfe4 upstream.

This adds the missing teardown step that removes the device link from
the group when the device addition fails.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Fixes: 797a8b4d768c5 ("iommu: Handle default domain attach failure")
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: zynq: Fix for bug in zynq_gpio_restore_context API

commit 36f2e7207f21a83ca0054116191f119ac64583ab upstream.

This patch writes the inverse value of Interrupt Mask Status
register into the Interrupt Enable register in
zynq_gpio_restore_context API to fix the bug.

Fixes: e11de4de28c0 ("gpio: zynq: Add support for suspend resume")
Signed-off-by: Swapna Manupati <swapna.manupati@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Link: https://lore.kernel.org/r/1577362338-28744-2-git-send-email-srinivas.neeli@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: onenand: omap2: Pass correct flags for prep_dma_memcpy

commit 8bcef0d54067077cf9a6cb129022c77559926e8c upstream.

The commit converting the driver to DMAengine was missing the flags for
the memcpy prepare call.
It went unnoticed since the omap-dma driver was ignoring them.

Fixes: 3ed6a4d1de2c5 (" mtd: onenand: omap2: Convert to use dmaengine for memcp")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: stm32: spdifrx: fix race condition in irq handler

commit 86e1956af4c863d653136fd6e5694adf2054dbaa upstream.

When snd_pcm_stop() is called in interrupt routine,
substream context may have already been released.
Add protection on substream context.

Fixes: 03e4d5d56fa5 ("ASoC: stm32: Add SPDIFRX support")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191204154333.7152-3-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: stm32: spdifrx: fix inconsistent lock state

commit 2859b1784031b5709446af8f6039c467f136e67d upstream.

In current spdifrx driver locks may be requested as follows:
- request lock on iec capture control, when starting synchronization.
- request lock in interrupt context, when spdifrx stop is called
from IRQ handler.

Take lock with IRQs disabled, to avoid the possible deadlock.

Lockdep report:
[   74.278059] ================================
[   74.282306] WARNING: inconsistent lock state
[   74.290120] --------------------------------
...
[   74.314373]        CPU0
[   74.314377]        ----
[   74.314381]   lock(&(&spdifrx->lock)->rlock);
[   74.314396]   <Interrupt>
[   74.314400]     lock(&(&spdifrx->lock)->rlock);

Fixes: 03e4d5d56fa5 ("ASoC: stm32: Add SPDIFRX support")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191204154333.7152-2-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: soc-core: Set dpcm_playback / dpcm_capture

commit 218fe9b7ec7f32c10a07539365488d80af7b0084 upstream.

When converting a normal link to a DPCM link we need
to set dpcm_playback / dpcm_capture otherwise playback/capture
streams will not be created resulting in errors like this:

[   36.039111]  sai1-wm8960-hifi: ASoC: no backend playback stream

Fixes: a655de808cbde ("ASoC: core: Allow topology to override machine driver FE DAI link config")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20191204151333.26625-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/bnxt_re: Fix Send Work Entry state check while polling completions

commit c5275723580922e5f3264f96751337661a153c7d upstream.

Some adapters need a fence Work Entry to handle retransmission.  Currently
the driver checks for this condition, only if the Send queue entry is
signalled. Implement the condition check, irrespective of the signalled
state of the Work queue entries

Failure to add the fence can result in access to memory that is already
marked as completed, triggering data corruption, transmission failure,
IOMMU failures, etc.

Fixes: 9152e0b722b2 ("RDMA/bnxt_re: HW workarounds for handling specific conditions")
Link: https://lore.kernel.org/r/1574671174-5064-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/bnxt_re: Avoid freeing MR resources if dereg fails

commit 9a4467a6b282a299b932608ac2c9034f8415359f upstream.

The driver returns an error code for MR dereg, but frees the MR structure.
When the MR dereg is retried due to previous error, the system crashes as
the structure is already freed.

  BUG: unable to handle kernel NULL pointer dereference at 00000000000001b8
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  CPU: 7 PID: 12178 Comm: ib_send_bw Kdump: loaded Not tainted 4.18.0-124.el8.x86_64 #1
  Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.1.10 03/10/2015
  RIP: 0010:__dev_printk+0x2a/0x70
  Code: 0f 1f 44 00 00 49 89 d1 48 85 f6 0f 84 f6 2b 00 00 4c 8b 46 70 4d 85 c0 75 04 4c 8b
46 10 48 8b 86 a8 00 00 00 48 85 c0 74 16 <48> 8b 08 0f be 7f 01 48 c7 c2 13 ac ac 83 83 ef 30 e9 10 fe ff ff
  RSP: 0018:ffffaf7c04607a60 EFLAGS: 00010006
  RAX: 00000000000001b8 RBX: ffffa0010c91c488 RCX: 0000000000000246
  RDX: ffffaf7c04607a68 RSI: ffffa0010c91caa8 RDI: ffffffff83a788eb
  RBP: ffffaf7c04607ac8 R08: 0000000000000000 R09: ffffaf7c04607a68
  R10: 0000000000000000 R11: 0000000000000001 R12: ffffaf7c04607b90
  R13: 000000000000000e R14: 0000000000000000 R15: 00000000ffffa001
  FS:  0000146fa1f1cdc0(0000) GS:ffffa0012fac0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000001b8 CR3: 000000007680a003 CR4: 00000000001606e0
  Call Trace:
   dev_err+0x6c/0x90
   ? dev_printk_emit+0x4e/0x70
   bnxt_qplib_rcfw_send_message+0x594/0x660 [bnxt_re]
   ? dev_err+0x6c/0x90
   bnxt_qplib_free_mrw+0x80/0xe0 [bnxt_re]
   bnxt_re_dereg_mr+0x2e/0xd0 [bnxt_re]
   ib_dereg_mr+0x2f/0x50 [ib_core]
   destroy_hw_idr_uobject+0x20/0x70 [ib_uverbs]
   uverbs_destroy_uobject+0x2e/0x170 [ib_uverbs]
   __uverbs_cleanup_ufile+0x6e/0x90 [ib_uverbs]
   uverbs_destroy_ufile_hw+0x61/0x130 [ib_uverbs]
   ib_uverbs_close+0x1f/0x80 [ib_uverbs]
   __fput+0xb7/0x230
   task_work_run+0x8a/0xb0
   do_exit+0x2da/0xb40
...
  RIP: 0033:0x146fa113a387
  Code: Bad RIP value.
  RSP: 002b:00007fff945d1478 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff02
  RAX: 0000000000000000 RBX: 000055a248908d70 RCX: 0000000000000000
  RDX: 0000146fa1f2b000 RSI: 0000000000000001 RDI: 000055a248906488
  RBP: 000055a248909630 R08: 0000000000010000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 000055a248906488
  R13: 0000000000000001 R14: 0000000000000000 R15: 000055a2489095f0

Do not free the MR structures, when driver returns error to the stack.

Fixes: 872f3578241d ("RDMA/bnxt_re: Add support for MRs with Huge pages")
Link: https://lore.kernel.org/r/1574671174-5064-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: mt6397: fix alarm register overwrite

commit 653997eeecef95c3ead4fba1b2d27e6a5854d6cd upstream.

Alarm registers high byte was reserved for other functions.
This add mask in alarm registers operation functions.
This also fix error condition in interrupt handler.

Fixes: fc2979118f3f ("rtc: mediatek: Add MT6397 RTC driver")

Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Link: https://lore.kernel.org/r/1576057435-3561-6-git-send-email-hsin-hsiung.wang@mediatek.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix use-after-free when destroying GEM context

This patch is a simplified fix to address a use-after-free in 4.14.x and
4.19.x stable kernels. The flaw is already fixed upstream, starting in
5.2, by commit 7dc40713618c ("drm/i915: Introduce a mutex for
file_priv->context_idr") as part of a more complex patch series that
isn't appropriate for backporting to stable kernels.

Expand mutex coverage, while destroying the GEM context, to include the
GEM context lookup step. This fixes a use-after-free detected by KASAN:

 ==================================================================
 BUG: KASAN: use-after-free in i915_ppgtt_close+0x2ca/0x2f0
 Write of size 1 at addr ffff8881368a8368 by task i915-poc/3124

 CPU: 0 PID: 3124 Comm: i915-poc Not tainted 4.14.164 #1
 Hardware name: HP HP Elite x2 1012 G1 /80FC, BIOS N85 Ver. 01.20 04/05/2017
 Call Trace:
  dump_stack+0xcd/0x12e
  ? _atomic_dec_and_lock+0x1b2/0x1b2
  ? i915_ppgtt_close+0x2ca/0x2f0
  ? printk+0x8f/0xab
  ? show_regs_print_info+0x53/0x53
  ? i915_ppgtt_close+0x2ca/0x2f0
  print_address_description+0x65/0x270
  ? i915_ppgtt_close+0x2ca/0x2f0
  kasan_report+0x251/0x340
  i915_ppgtt_close+0x2ca/0x2f0
  ? __radix_tree_insert+0x3f0/0x3f0
  ? i915_ppgtt_init_hw+0x7c0/0x7c0
  context_close+0x42e/0x680
  ? i915_gem_context_release+0x230/0x230
  ? kasan_kmalloc+0xa0/0xd0
  ? radix_tree_delete_item+0x1d4/0x250
  ? radix_tree_lookup+0x10/0x10
  ? inet_recvmsg+0x4b0/0x4b0
  ? kasan_slab_free+0x88/0xc0
  i915_gem_context_destroy_ioctl+0x236/0x300
  ? i915_gem_context_create_ioctl+0x360/0x360
  ? drm_dev_printk+0x1d0/0x1d0
  ? memcpy+0x34/0x50
  ? i915_gem_context_create_ioctl+0x360/0x360
  drm_ioctl_kernel+0x1b0/0x2b0
  ? drm_ioctl_permit+0x2a0/0x2a0
  ? avc_ss_reset+0xd0/0xd0
  drm_ioctl+0x6fe/0xa20
  ? i915_gem_context_create_ioctl+0x360/0x360
  ? drm_getstats+0x20/0x20
  ? put_unused_fd+0x260/0x260
  do_vfs_ioctl+0x189/0x12d0
  ? ioctl_preallocate+0x280/0x280
  ? selinux_file_ioctl+0x3a7/0x680
  ? selinux_bprm_set_creds+0xe30/0xe30
  ? security_file_ioctl+0x69/0xa0
  ? selinux_bprm_set_creds+0xe30/0xe30
  SyS_ioctl+0x6f/0x80
  ? __sys_sendmmsg+0x4a0/0x4a0
  ? do_vfs_ioctl+0x12d0/0x12d0
  do_syscall_64+0x214/0x5f0
  ? __switch_to_asm+0x31/0x60
  ? __switch_to_asm+0x25/0x60
  ? __switch_to_asm+0x31/0x60
  ? syscall_return_slowpath+0x2c0/0x2c0
  ? copy_overflow+0x20/0x20
  ? __switch_to_asm+0x25/0x60
  ? syscall_return_via_sysret+0x2a/0x7a
  ? prepare_exit_to_usermode+0x200/0x200
  ? __switch_to_asm+0x31/0x60
  ? __switch_to_asm+0x31/0x60
  ? __switch_to_asm+0x25/0x60
  ? __switch_to_asm+0x25/0x60
  ? __switch_to_asm+0x31/0x60
  ? __switch_to_asm+0x25/0x60
  ? __switch_to_asm+0x31/0x60
  ? __switch_to_asm+0x31/0x60
  ? __switch_to_asm+0x25/0x60
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
 RIP: 0033:0x7f7fda5115d7
 RSP: 002b:00007f7eec317ec8 EFLAGS: 00000286 ORIG_RAX: 0000000000000010
 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7fda5115d7
 RDX: 000055b306db9188 RSI: 000000004008646e RDI: 0000000000000003
 RBP: 00007f7eec317ef0 R08: 00007f7eec318700 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000286 R12: 00007f7eec317fc0
 R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffd8007ade0

 Allocated by task 2898:
  save_stack+0x32/0xb0
  kasan_kmalloc+0xa0/0xd0
  kmem_cache_alloc_trace+0x5e/0x180
  i915_ppgtt_create+0xab/0x2510
  i915_gem_create_context+0x981/0xf90
  i915_gem_context_create_ioctl+0x1d7/0x360
  drm_ioctl_kernel+0x1b0/0x2b0
  drm_ioctl+0x6fe/0xa20
  do_vfs_ioctl+0x189/0x12d0
  SyS_ioctl+0x6f/0x80
  do_syscall_64+0x214/0x5f0
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2

 Freed by task 104:
  save_stack+0x32/0xb0
  kasan_slab_free+0x72/0xc0
  kfree+0x88/0x190
  i915_ppgtt_release+0x24e/0x460
  i915_gem_context_free+0x90/0x480
  contexts_free_worker+0x54/0x80
  process_one_work+0x876/0x14e0
  worker_thread+0x1b8/0xfd0
  kthread+0x2f8/0x3c0
  ret_from_fork+0x35/0x40

 The buggy address belongs to the object at ffff8881368a8000
  which belongs to the cache kmalloc-8192 of size 8192
 The buggy address is located 872 bytes inside of
  8192-byte region [ffff8881368a8000, ffff8881368aa000)
 The buggy address belongs to the page:
 page:ffffea0004da2a00 count:1 mapcount:0 mapping:          (null) index:0x0 compound_mapcount: 0
 flags: 0x200000000008100(slab|head)
 raw: 0200000000008100 0000000000000000 0000000000000000 0000000100030003
 raw: dead000000000100 dead000000000200 ffff88822a002280 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffff8881368a8200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8881368a8280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 >ffff8881368a8300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                           ^
  ffff8881368a8380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8881368a8400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ==================================================================

Fixes: 1acfc104cdf8 ("drm/i915: Enable rcu-only context lookups")
Reported-by: 罗权 <luoquan@qianxin.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: stable@vger.kernel.org # 4.14.x
Cc: stable@vger.kernel.org # 4.19.x
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: Fix memleak in __feat_register_sp

commit 1d3ff0950e2b40dc861b1739029649d03f591820 upstream.

If dccp_feat_push_change fails, we forget free the mem
which is alloced by kmemdup in dccp_feat_clone_sp_val.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e8ef967a54f4 ("dccp: Registration routines for changing feature values")
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA: Fix goto target to release the allocated memory

commit 4a9d46a9fe14401f21df69cea97c62396d5fb053 upstream.

In bnxt_re_create_srq(), when ib_copy_to_udata() fails allocated memory
should be released by goto fail.

Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Link: https://lore.kernel.org/r/20190910222120.16517-1-navid.emamdoost@gmail.com
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: fix memory leaks in iwl_pcie_ctxt_info_gen3_init

commit 0f4f199443faca715523b0659aa536251d8b978f upstream.

In iwl_pcie_ctxt_info_gen3_init there are cases that the allocated dma
memory is leaked in case of error.

DMA memories prph_scratch, prph_info, and ctxt_info_gen3 are allocated
and initialized to be later assigned to trans_pcie. But in any error case
before such assignment the allocated memories should be released.

First of such error cases happens when iwl_pcie_init_fw_sec fails.
Current implementation correctly releases prph_scratch. But in two
sunsequent error cases where dma_alloc_coherent may fail, such
releases are missing.

This commit adds release for prph_scratch when allocation for
prph_info fails, and adds releases for prph_scratch and prph_info when
allocation for ctxt_info_gen3 fails.

Fixes: 2ee824026288 ("iwlwifi: pcie: support context information for 22560 devices")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: dbg_ini: fix memory leak in alloc_sgtable

commit b4b814fec1a5a849383f7b3886b654a13abbda7d upstream.

In alloc_sgtable if alloc_page fails, the alocated table should be
released.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: usb:zr364xx:Fix KASAN:null-ptr-deref Read in zr364xx_vidioc_querycap

commit 5d2e73a5f80a5b5aff3caf1ec6d39b5b3f54b26e upstream.

SyzKaller hit the null pointer deref while reading from uninitialized
udev->product in zr364xx_vidioc_querycap().

==================================================================
BUG: KASAN: null-ptr-deref in read_word_at_a_time+0xe/0x20
include/linux/compiler.h:274
Read of size 1 at addr 0000000000000000 by task v4l_id/5287

CPU: 1 PID: 5287 Comm: v4l_id Not tainted 5.1.0-rc3-319004-g43151d6 #6
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xe8/0x16e lib/dump_stack.c:113
  kasan_report.cold+0x5/0x3c mm/kasan/report.c:321
  read_word_at_a_time+0xe/0x20 include/linux/compiler.h:274
  strscpy+0x8a/0x280 lib/string.c:207
  zr364xx_vidioc_querycap+0xb5/0x210 drivers/media/usb/zr364xx/zr364xx.c:706
  v4l_querycap+0x12b/0x340 drivers/media/v4l2-core/v4l2-ioctl.c:1062
  __video_do_ioctl+0x5bb/0xb40 drivers/media/v4l2-core/v4l2-ioctl.c:2874
  video_usercopy+0x44e/0xf00 drivers/media/v4l2-core/v4l2-ioctl.c:3056
  v4l2_ioctl+0x14e/0x1a0 drivers/media/v4l2-core/v4l2-dev.c:364
  vfs_ioctl fs/ioctl.c:46 [inline]
  file_ioctl fs/ioctl.c:509 [inline]
  do_vfs_ioctl+0xced/0x12f0 fs/ioctl.c:696
  ksys_ioctl+0xa0/0xc0 fs/ioctl.c:713
  __do_sys_ioctl fs/ioctl.c:720 [inline]
  __se_sys_ioctl fs/ioctl.c:718 [inline]
  __x64_sys_ioctl+0x74/0xb0 fs/ioctl.c:718
  do_syscall_64+0xcf/0x4f0 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f3b56d8b347
Code: 90 90 90 48 8b 05 f1 fa 2a 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff
ff c3 90 90 90 90 90 90 90 90 90 90 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff
ff 73 01 c3 48 8b 0d c1 fa 2a 00 31 d2 48 29 c2 64
RSP: 002b:00007ffe005d5d68 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f3b56d8b347
RDX: 00007ffe005d5d70 RSI: 0000000080685600 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400884
R13: 00007ffe005d5ec0 R14: 0000000000000000 R15: 0000000000000000
==================================================================

For this device udev->product is not initialized and accessing it causes a NULL pointer deref.

The fix is to check for NULL before strscpy() and copy empty string, if
product is NULL

Reported-by: syzbot+66010012fd4c531a1a96@syzkaller.appspotmail.com
Signed-off-by: Vandana BN <bnvandana@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
[bwh: Backported to 4.19: This function uses strlcpy() instead of strscpy()]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: check if file namelen exceeds max value

commit 720db068634c91553a8e1d9a0fcd8c7050e06d2b upstream.

Dentry bitmap is not enough to detect incorrect dentries. So this patch
also checks the namelen value of a dentry.

Signed-off-by: Gong Chen <gongchen4@huawei.com>
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: check memory boundary by insane namelen

commit 4e240d1bab1ead280ddf5eb05058dba6bbd57d10 upstream.

If namelen is corrupted to have very long value, fill_dentries can copy
wrong memory area.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: Move err variable to function scope in f2fs_fill_dentries()

This is preparation for the following backported fixes.  It was done
upstream as part of commit e1293bdfa01d "f2fs: plug readahead IO in
readdir()", the rest of which does not seem suitable for stable.

Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: Do not send Layer 2 Update frame before authorization

commit 3e493173b7841259a08c5c8e5cbe90adb349da7e upstream.

The Layer 2 Update frame is used to update bridges when a station roams
to another AP even if that STA does not transmit any frames after the
reassociation. This behavior was described in IEEE Std 802.11F-2003 as
something that would happen based on MLME-ASSOCIATE.indication, i.e.,
before completing 4-way handshake. However, this IEEE trial-use
recommended practice document was published before RSN (IEEE Std
802.11i-2004) and as such, did not consider RSN use cases. Furthermore,
IEEE Std 802.11F-2003 was withdrawn in 2006 and as such, has not been
maintained amd should not be used anymore.

Sending out the Layer 2 Update frame immediately after association is
fine for open networks (and also when using SAE, FT protocol, or FILS
authentication when the station is actually authenticated by the time
association completes). However, it is not appropriate for cases where
RSN is used with PSK or EAP authentication since the station is actually
fully authenticated only once the 4-way handshake completes after
authentication and attackers might be able to use the unauthenticated
triggering of Layer 2 Update frame transmission to disrupt bridge
behavior.

Fix this by postponing transmission of the Layer 2 Update frame from
station entry addition to the point when the station entry is marked
authorized. Similarly, send out the VLAN binding update only if the STA
entry has already been authorized.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211/mac80211: make ieee80211_send_layer2_update a public function

commit 30ca1aa536211f5ac3de0173513a7a99a98a97f3 upstream.

Make ieee80211_send_layer2_update() a common function so other drivers
can re-use it.

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[bwh: Backported to 4.19 as dependency of commit 3e493173b784
 "mac80211: Do not send Layer 2 Update frame before authorization"]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/select: avoid clang stack usage warning

commit ad312f95d41c9de19313c51e388c4984451c010f upstream.

The select() implementation is carefully tuned to put a sensible amount
of data on the stack for holding a copy of the user space fd_set, but
not too large to risk overflowing the kernel stack.

When building a 32-bit kernel with clang, we need a little more space
than with gcc, which often triggers a warning:

  fs/select.c:619:5: error: stack frame size of 1048 bytes in function 'core_sys_select' [-Werror,-Wframe-larger-than=]
  int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,

I experimentally found that for 32-bit ARM, reducing the maximum stack
usage by 64 bytes keeps us reliably under the warning limit again.

Link: http://lkml.kernel.org/r/20190307090146.1874906-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ethtool: reduce stack usage with clang

commit 3499e87ea0413ee5b2cc028f4c8ed4d424bc7f98 upstream.

clang inlines the dev_ethtool() more aggressively than gcc does, leading
to a larger amount of used stack space:

net/core/ethtool.c:2536:24: error: stack frame size of 1216 bytes in function 'dev_ethtool' [-Werror,-Wframe-larger-than=]

Marking the sub-functions that require the most stack space as
noinline_for_stack gives us reasonable behavior on all compilers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hidraw, uhid: Always report EPOLLOUT

[ Upstream commit 9e635c2851df6caee651e589fbf937b637973c91 ]

hidraw and uhid device nodes are always available for writing so we should
always report EPOLLOUT and EPOLLWRNORM bits, not only in the cases when
there is nothing to read.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: be54e7461ffdc ("HID: uhid: Fix returning EPOLLOUT from uhid_char_poll")
Fixes: 9f3b61dc1dd7b ("HID: hidraw: Fix returning EPOLLOUT from hidraw_poll")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: hidraw: Fix returning EPOLLOUT from hidraw_poll

[ Upstream commit 9f3b61dc1dd7b81e99e7ed23776bb64a35f39e1a ]

When polling a connected /dev/hidrawX device, it is useful to get the
EPOLLOUT when writing is possible. Since writing is possible as soon as
the device is connected, always return it.

Right now EPOLLOUT is only returned when there are also input reports
are available. This works if devices start sending reports when
connected, but some HID devices might need an output report first before
sending any input reports. This change will allow using EPOLLOUT here as
well.

Fixes: 378b80370aa1 ("hidraw: Return EPOLLOUT from hidraw_poll")
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hidraw: Return EPOLLOUT from hidraw_poll

[ Upstream commit 378b80370aa1fe50f9c48a3ac8af3e416e73b89f ]

Always return EPOLLOUT from hidraw_poll when a device is connected.
This is safe since writes are always possible (but will always block).

hidraw does not support non-blocking writes and instead always calls
blocking backend functions on write requests. Hence, so far, a call to
poll never returned EPOLLOUT, which confuses tools like socat.

Signed-off-by: Fabian Henneke <fabian.henneke@gmail.com>
In-reply-to: <CA+hv5qkyis03CgYTWeWX9cr0my-d2Oe+aZo+mjmWRXgjrGqyrw@mail.gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.19.96

drm/i915/gen9: Clear residual context state on context switch

commit bc8a76a152c5f9ef3b48104154a65a68a8b76946 upstream.

Intel ID: PSIRT-TA-201910-001
CVEID: CVE-2019-14615

Intel GPU Hardware prior to Gen11 does not clear EU state
during a context switch. This can result in information
leakage between contexts.

For Gen8 and Gen9, hardware provides a mechanism for
fast cleardown of the EU state, by issuing a PIPE_CONTROL
with bit 27 set. We can use this in a context batch buffer
to explicitly cleardown the state on every context switch.

As this workaround is already in place for gen8, we can borrow
the code verbatim for Gen9.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Kumar Valsan Prathap <prathap.kumar.valsan@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Balestrieri Francesco <francesco.balestrieri@intel.com>
Cc: Bloomfield Jon <jon.bloomfield@intel.com>
Cc: Dutt Sudeep <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present

commit 22dad713b8a5ff488e07b821195270672f486eb2 upstream.

The set uadt functions assume lineno is never NULL, but it is in
case of ip_set_utest().

syzkaller managed to generate a netlink message that calls this with
LINENO attr present:

general protection fault: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:hash_mac4_uadt+0x1bc/0x470 net/netfilter/ipset/ip_set_hash_mac.c:104
Call Trace:
 ip_set_utest+0x55b/0x890 net/netfilter/ipset/ip_set_core.c:1867
 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 nfnetlink_rcv+0x1ba/0x460 net/netfilter/nfnetlink.c:563

pass a dummy lineno storage, its easier than patching all set
implementations.

This seems to be a day-0 bug.

Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Reported-by: syzbot+34bd2369d38707f3f4a7@syzkaller.appspotmail.com
Fixes: a7b4f989a6294 ("netfilter: ipset: IP set core support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: conntrack: dccp, sctp: handle null timeout argument

commit 1d9a7acd3d1e74c2d150d8934f7f55bed6d70858 upstream.

The timeout pointer can be NULL which means we should modify the
per-nets timeout instead.

All do this, except sctp and dccp which instead give:

general protection fault: 0000 [#1] PREEMPT SMP KASAN
net/netfilter/nf_conntrack_proto_dccp.c:682
 ctnl_timeout_parse_policy+0x150/0x1d0 net/netfilter/nfnetlink_cttimeout.c:67
 cttimeout_default_set+0x150/0x1c0 net/netfilter/nfnetlink_cttimeout.c:368
 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477

Reported-by: syzbot+46a4ad33f345d1dd346e@syzkaller.appspotmail.com
Fixes: c779e849608a8 ("netfilter: conntrack: remove get_timeout() indirection")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: arp_tables: init netns pointer in xt_tgchk_param struct

commit 1b789577f655060d98d20ed0c6f9fbd469d6ba63 upstream.

We get crash when the targets checkentry function tries to make
use of the network namespace pointer for arptables.

When the net pointer got added back in 2010, only ip/ip6/ebtables were
changed to initialize it, so arptables has this set to NULL.

This isn't a problem for normal arptables because no existing
arptables target has a checkentry function that makes use of par->net.

However, direct users of the setsockopt interface can provide any
target they want as long as its registered for ARP or UNPSEC protocols.

syzkaller managed to send a semi-valid arptables rule for RATEEST target
which is enough to trigger NULL deref:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
RIP: xt_rateest_tg_checkentry+0x11d/0xb40 net/netfilter/xt_RATEEST.c:109
[..]
 xt_check_target+0x283/0x690 net/netfilter/x_tables.c:1019
 check_target net/ipv4/netfilter/arp_tables.c:399 [inline]
 find_check_entry net/ipv4/netfilter/arp_tables.c:422 [inline]
 translate_table+0x1005/0x1d70 net/ipv4/netfilter/arp_tables.c:572
 do_replace net/ipv4/netfilter/arp_tables.c:977 [inline]
 do_arpt_set_ctl+0x310/0x640 net/ipv4/netfilter/arp_tables.c:1456

Fixes: add67461240c1d ("netfilter: add struct net * to target parameters")
Reported-by: syzbot+d7358a458d8a81aee898@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: cpcap-usb: Fix flakey host idling and enumerating of devices

commit 049226b9fd7442149dcbcf55f15408f5973cceda upstream.

We must let the USB host idle things properly before we switch to debug
UART mode. Otherwise the USB host may never idle after disconnecting
devices, and that causes the next enumeration to be flakey.

Cc: Jacopo Mondi <jacopo@jmondi.org>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: cpcap-usb: Fix error path when no host driver is loaded

commit 4acb0200ab2b07843e3ef5599add3454c7440f03 upstream.

If musb_mailbox() returns an error, we must still continue to finish
configuring the phy.

Otherwise the phy state may end up only half initialized, and this can
cause the debug serial console to stop working. And this will happen if the
usb driver musb controller is not loaded.

Let's fix the issue by adding helper for cpcap_usb_try_musb_mailbox().

Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support")
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Fix: Don't skip endpoint descriptors with maxpacket=0

commit 2548288b4fb059b2da9ceada172ef763077e8a59 upstream.

It turns out that even though endpoints with a maxpacket length of 0
aren't useful for data transfer, the descriptors do serve other
purposes.  In particular, skipping them will also skip over other
class-specific descriptors for classes such as UVC.  This unexpected
side effect has caused some UVC cameras to stop working.

In addition, the USB spec requires that when isochronous endpoint
descriptors are present in an interface's altsetting 0 (which is true
on some devices), the maxpacket size _must_ be set to 0.  Warning
about such things seems like a bad idea.

This patch updates an earlier commit which would log a warning and
skip these endpoint descriptors.  Now we only log a warning, and we
don't even do that for isochronous endpoints in altsetting 0.

We don't need to worry about preventing endpoints with maxpacket = 0
from ever being used for data transfers; usb_submit_urb() already
checks for this.

Reported-and-tested-by: Roger Whittaker <Roger.Whittaker@suse.com>
Fixes: d482c7bb0541 ("USB: Skip endpoints with 0 maxpacket length")
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://marc.info/?l=linux-usb&m=157790377329882&w=2
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2001061040270.1514-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hiddev: fix mess in hiddev_open()

commit 18a1b06e5b91d47dc86c0a66a762646ea7c5d141 upstream.

The open method of hiddev handler fails to bring the device out of
autosuspend state as was promised in 0361a28d3f9a, as it actually has 2
blocks that try to start the transport (call hid_hw_open()) with both
being guarded by the "open" counter, so the 2nd block is never executed as
the first block increments the counter so it is never at 0 when we check
it for the second block.

Additionally hiddev_open() was leaving counter incremented on errors,
causing the device to never be reopened properly if there was ever an
error.

Let's fix all of this by factoring out code that creates client structure
and powers up the device into a separate function that is being called
from usbhid_open() with the "existancelock" being held.

Fixes: 0361a28d3f9a ("HID: autosuspend support for USB HID")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: fix memory leak

commit b8d17e7d93d2beb89e4f34c59996376b8b544792 upstream.

In ath10k_usb_hif_tx_sg the allocated urb should be released if
usb_submit_urb fails.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8xxxu: prevent leaking urb

commit a2cdd07488e666aa93a49a3fc9c9b1299e27ef3c upstream.

In rtl8xxxu_submit_int_urb if usb_submit_urb fails the allocated urb
should be released.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: bfa: release allocated memory in case of error

commit 0e62395da2bd5166d7c9e14cbc7503b256a34cb0 upstream.

In bfad_im_get_stats if bfa_port_get_stats fails, allocated memory needs to
be released.

Link: https://lore.kernel.org/r/20190910234417.22151-1-navid.emamdoost@gmail.com
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: pcie: Fix memory leak in mwifiex_pcie_alloc_cmdrsp_buf

commit db8fd2cde93227e566a412cf53173ffa227998bc upstream.

In mwifiex_pcie_alloc_cmdrsp_buf, a new skb is allocated which should be
released if mwifiex_map_pci_memory() fails. The release is added.

Fixes: fc3314609047 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: fix possible heap overflow in mwifiex_process_country_ie()

commit 3d94a4a8373bf5f45cf5f939e88b8354dbf2311b upstream.

mwifiex_process_country_ie() function parse elements of bss
descriptor in beacon packet. When processing WLAN_EID_COUNTRY
element, there is no upper limit check for country_ie_len before
calling memcpy. The destination buffer domain_info->triplet is an
array of length MWIFIEX_MAX_TRIPLET_802_11D(83). The remote
attacker can build a fake AP with the same ssid as real AP, and
send malicous beacon packet with long WLAN_EID_COUNTRY elemen
(country_ie_len > 83). Attacker can  force STA connect to fake AP
on a different channel. When the victim STA connects to fake AP,
will trigger the heap buffer overflow. Fix this by checking for
length and if found invalid, don not connect to the AP.

This fix addresses CVE-2019-14895.

Reported-by: huangwen <huangwenabc@gmail.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: always relink the port

commit 273f632912f1b24b642ba5b7eb5022e43a72f3b5 upstream.

If the serial device is disconnected and reconnected, it re-enumerates
properly but does not link it. fwiw, linking means just saving the port
index, so allow it always as there is no harm in saving the same value
again even if it tries to relink with the same port.

Fixes: fb2b90014d78 ("tty: link tty and port before configuring it as console")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191227174434.12057-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: link tty and port before configuring it as console

commit fb2b90014d782d80d7ebf663e50f96d8c507a73c upstream.

There seems to be a race condition in tty drivers and I could see on
many boot cycles a NULL pointer dereference as tty_init_dev() tries to
do 'tty->port->itty = tty' even though tty->port is NULL.
'tty->port' will be set by the driver and if the driver has not yet done
it before we open the tty device we can get to this situation. By adding
some extra debug prints, I noticed that:

6.650130: uart_add_one_port
6.663849: register_console
6.664846: tty_open
6.674391: tty_init_dev
6.675456: tty_port_link_device

uart_add_one_port() registers the console, as soon as it registers, the
userspace tries to use it and that leads to tty_open() but
uart_add_one_port() has not yet done tty_port_link_device() and so
tty->port is not yet configured when control reaches tty_init_dev().

Further look into the code and tty_port_link_device() is done by
uart_add_one_port(). After registering the console uart_add_one_port()
will call tty_port_register_device_attr_serdev() and
tty_port_link_device() is called from this.

Call add tty_port_link_device() before uart_configure_port() is done and
add a check in tty_port_link_device() so that it only links the port if
it has not been done yet.

Suggested-by: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191212131602.29504-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serdev: Don't claim unsupported ACPI serial devices

commit c5ee0b3104e0b292d353e63fd31cb8c692645d8c upstream.

Serdev sub-system claims all ACPI serial devices that are not already
initialised. As a result, no device node is created for serial ports
on certain boards such as the Apollo Lake based UP2. This has the
unintended consequence of not being able to raise the login prompt via
serial connection.

Introduce a blacklist to reject ACPI serial devices that should not be
claimed by serdev sub-system. Add the peripheral ids for Intel HS UART
to the blacklist to bring back serial port on SoCs carrying them.

Cc: stable@vger.kernel.org
Signed-off-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Johan Hovold <johan@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191219100345.911093-1-punit1.agrawal@toshiba.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21

commit 58dcc5bf4030cab548d5c98cd4cd3632a5444d5a upstream.

This device was added to the stand-alone driver on github.
Add it to the staging driver as well.

Link: https://github.com/lwfinger/rtl8188eu/commit/b9b537aa25a8
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191228143725.24455-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713

commit a9d3a9cedc1330c720e0ddde1978a8e7771da5ab upstream.

The Advantech PCI-1713 has 32 analog input channels, but an incorrect
bit-mask in the definition of the `PCI171X_MUX_CHANH(x)` and
PCI171X_MUX_CHANL(x)` macros is causing channels 16 to 31 to be aliases
of channels 0 to 15.  Change the bit-mask value from 0xf to 0xff to fix
it.  Note that the channel numbers will have been range checked already,
so the bit-mask isn't really needed.

Fixes: 92c65e5553ed ("staging: comedi: adv_pci1710: define the mux control register bits")
Reported-by: Dmytro Fil <monkdaf@gmail.com>
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20191227170054.32051-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: dma: Correct parameter passed to IRQ handler

commit c80d0f4426c7fdc7efd6ae8d8b021dcfc89b4254 upstream.

The IRQ handler was passed a pointer to a struct dma_controller, but the
argument was then casted to a pointer to a struct musb_dma_controller.

Fixes: 427c4f333474 ("usb: struct device - replace bus_id with dev_name(), dev_set_name()")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20191216161844.772-2-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: Disable pullup at init

commit 96a0c12843109e5c4d5eb1e09d915fdd0ce31d25 upstream.

The pullup may be already enabled before the driver is initialized. This
happens for instance on JZ4740.

It has to be disabled at init time, as we cannot guarantee that a gadget
driver will be bound to the UDC.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Suggested-by: Bin Liu <b-liu@ti.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200107152625.857-3-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: fix idling for suspend after disconnect interrupt

commit 5fbf7a2534703fd71159d3d71504b0ad01b43394 upstream.

When disconnected as USB B-device, suspend interrupt should come before
diconnect interrupt, because the DP/DM pins are shorter than the
VBUS/GND pins on the USB connectors. But we sometimes get a suspend
interrupt after disconnect interrupt. In that case we have devctl set to
99 with VBUS still valid and musb_pm_runtime_check_session() wrongly
thinks we have an active session. We have no other interrupts after
disconnect coming in this case at least with the omap2430 glue.

Let's fix the issue by checking the interrupt status again with
delayed work for the devctl 99 case. In the suspend after disconnect
case the devctl session bit has cleared by then and musb can idle.
For a typical USB B-device connect case we just continue with normal
interrupts.

Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core")

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200107152625.857-2-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add ZLP support for 0x1bc7/0x9010

commit 2438c3a19dec5e98905fd3ffcc2f24716aceda6b upstream.

Telit FN980 flashing device 0x1bc7/0x9010 requires zero packet
to be sent if out data size is is equal to the endpoint max size.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
[ johan: switch operands in conditional ]
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: set usb_set_intfdata on driver fail.

commit c0bcf9f3f5b661d4ace2a64a79ef661edd2a4dc8 upstream.

intfdata will contain stale pointer when the device is detached after
failed initialization when referenced in vt6656_disconnect

Provide driver access to it here and NULL it.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/6de448d7-d833-ef2e-dd7b-3ef9992fee0e@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism

commit aa23ca3d98f756d5b1e503fb140665fb24a41a38 upstream.

On some laptops enabling wakeup on the GPIO interrupts used for ACPI _AEI
event handling causes spurious wakeups.

This commit adds a new honor_wakeup option, defaulting to true (our current
behavior), which can be used to disable wakeup on troublesome hardware
to avoid these spurious wakeups.

This is a workaround for an architectural problem with s2idle under Linux
where we do not have any mechanism to immediately go back to sleep after
wakeup events, other then for embedded-controller events using the standard
ACPI EC interface, for details see:
https://lore.kernel.org/linux-acpi/61450f9b-cbc6-0c09-8b3a-aff6bf9a0b3c@redhat.com/

One series of laptops which is not able to suspend without this workaround
is the HP x2 10 Cherry Trail models, this commit adds a DMI based quirk
which makes sets honor_wakeup to false on these models.

Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200105160357.97154-3-hdegoede@redhat.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>