spi: dw-dma: Check DMA Tx-desc submission status

We suggest to add the dmaengine_submit() return value test for errors.  It
has been unnecessary while the driver was expected to be utilized in pair
with DW DMAC. But since now the driver can be used with any DMA engine, it
might be useful to track the errors on DMA submissions so not miss them
and get into an unpredictable driver behaviour.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20200920112322.24585-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: dw-dma: Move DMA transfers submission to the channels prep methods

Indeed we can freely move the dmaengine_submit() method invocation and the
Tx and Rx busy flag setting into the DMA Tx/Rx prepare methods. Since the
Tx/Rx preparation method is now mainly used for the DMA transfers
submission, here we suggest to rename it to have the _submit_{r,t}x suffix
instead.

By having this alteration applied first we implement another code
preparation before adding the one-by-one DMA SG entries transmission,
second we now have the dma_async_tx_descriptor descriptor used locally
only in the new DMA transfers submission methods (this will be cleaned up
a bit later), third we make the generic transfer method more readable,
where now the functionality of submission, execution and wait procedures
is transparently split up instead of having a preparation, intermixed
submission/execution and wait procedures.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20200920112322.24585-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: dw-dma: Check rx_buf availability in the xfer method

Checking rx_buf for being NULL and returning NULL from the Rx-channel
preparation method doesn't let us to distinguish that situation from
errors happening during the Rx SG-list preparation. So it's better to make
sure that the rx_buf not-NULL and full-duplex communication is requested
prior calling the Rx preparation method.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20200920112322.24585-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: dw-dma: Configure the DMA channels in dma_setup

Mainly this is a preparation patch before adding one-by-one DMA SG entries
transmission. But logically the Tx and Rx DMA channels setup should be
performed in the dma_setup() callback anyway. So we'll move the DMA slave
channels src/dst burst lengths, address and address width configuration
from the Tx/Rx channels preparation methods to the dedicated functions and
then make sure it's called at the DMA setup stage.

Note we now make sure the return value of the dmaengine_slave_config()
method doesn't indicate an error. It has been unnecessary in case if Dw
DMAC is utilized as a DMA engine, since its device_config() callback
always returns zero (though it might change in future). But since DW APB
SSI driver now supports any DMA back-end we must make sure the DMA device
configuration has been successful before proceeding with further setups.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20200920112322.24585-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: dw-dma: Fail DMA-based transfer if no Tx-buffer specified

Since commit 46164fde6b78 ("spi: dw: Fix Rx-only DMA transfers") if DMA
interface is enabled, then Tx-buffer must be available in each SPI
transfer. It's required since in order to activate the incoming data
reception either DMA or CPU must be pushing data out to the SPI bus.
But the DW APB SSI DMA driver code is still left in state as if Tx-buffer
might be optional, which is no longer true. Let's fix it so an error would
be returned if no Tx-buffer detected and DMA Tx would be always
enabled.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20200920112322.24585-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: dw-dma: Set DMA Level registers on init

Indeed the registers content doesn't get cleared when the SPI controller
is disabled and enabled. Max burst lengths aren't changed since the Rx and
Tx DMA channels are requested on init stage and are kept acquired until
the device is removed. Obviously SPI controller FIFO depth can't be
changed. Due to all of that we can safely move the DMA Transmit and
Receive data level registers initialization to the SPI controller DMA init
stage (when the SPI controller is being probed) instead of doing it for
each SPI transfer when dma_setup is called. This shall speed the DMA-based
SPI transfer initialization up a bit, particularly if the APB bus is
relatively slow.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20200920112322.24585-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: hisi-sfc-v3xx: fix spelling mistake "occured" -> "occurred"

There is a spelling mistake in a dev_err message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200928123042.125359-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series "Add IRQ mode support for hisi-sfc-v3xx driver and some cleanups" from Yicong Yang <yangyicong@hisilicon.com>:

This series mainly add the IRQ mode support for hisi-sfc-v3xx driver, and some
cleanups for the preparation of the IRQ mode.
After this patch, the device can work in IRQ mode, or if firmware doesn't
declare irq support it will fall back to Poll mode.

Patch 1-2 refactor the .exec_op() path to make it simpler and clearer.
Patch 3 factor the definition of the interrupt bits.
Patch 4 add the IRQ support of the driver.

Yicong Yang (4):
  spi: hisi-sfc-v3xx: factor out IO modes configuration
  spi: hisi-sfc-v3xx: factor out bus config and transfer functions
  spi: hisi-sfc-v3xx: factor out the bit definition of interrupt
    register
  spi: hisi-sfc-v3xx: add support for IRQ mode

 drivers/spi/spi-hisi-sfc-v3xx.c | 261 +++++++++++++++++++++++++++++-----------
 1 file changed, 190 insertions(+), 71 deletions(-)

--
2.8.1

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

spi: spi-mtk-nor: fix timeout calculation overflow

CLK_TO_US macro is used to calculate potential transfer time for various
timeout handling. However it overflows on transfer bigger than 512 bytes
because it first did (len * 8 * 1000000).
This controller typically operates at 45MHz. This patch did 2 things:
1. calculate clock / 1000000 first
2. add a 4M transfer size cap so that the final timeout in DMA reading
   doesn't overflow

Fixes: 881d1ee9fe81f ("spi: add support for mediatek spi-nor controller")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Link: https://lore.kernel.org/r/20200922114905.2942859-1-gch981213@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: hisi-sfc-v3xx: add support for IRQ mode

The controller can work with interrupts, so add support for it.
Then we can work under IRQ mode or Poll mode now, if firmware
doesn't declare the IRQ support, it will fall back to Poll mode.

Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/1600950270-52536-5-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: hisi-sfc-v3xx: factor out the bit definition of interrupt register

The definition of the register field in the interrupt corresponding
registers are the same. So factor them out to public place.

Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/1600950270-52536-4-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: hisi-sfc-v3xx: factor out bus config and transfer functions

In hisi_sfc_v3xx_generic_exec_op(), we will write the data to the buffer,
configure and start the transfer, read the data to the buffer and check
whether occurs an error. Factor out the config and transfer start codes
as individual functions, to make the process a bit clearer.

Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/1600950270-52536-3-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: hisi-sfc-v3xx: factor out IO modes configuration

Factor IO modes configuration out of hisi_sfc_v3xx_generic_exec_op()
using an IO modes lookup table. This will make the process a bit clearer
and reduce the cyclomatic complexity. Simplify the IO mode definition
macros a little bit as well.

Also add the .supports_op() method for the controller mem ops, in order
to avoid OOB access.

Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/1600950270-52536-2-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: spi-zynqmp-gqspi: Fix incorrect indentation

Fixed incorrect indentation in ZynqMP qspi controller driver.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/2b246b6f0925c8a2a767a4240e8738ffeefd62be.1600931476.git.michal.simek@xilinx.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework

Updated Zynqmp qspi controller driver to use spi-mem framework.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/490a7642a975f4d3dd9618304e9e45f7e2414661.1600931476.git.michal.simek@xilinx.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: spi-zynqmp-gqspi: Fix kernel-doc warnings

Fix kernel-doc warnings in ZynqMP qspi driver file.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/ba5920c57eee06fafa6f9d1df9859e69819ac301.1600931476.git.michal.simek@xilinx.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: spi-imx: spi_imx_transfer(): add support for effective_speed_hz

This patch implementes the reporting of the effectivly used speed_hz for the
transfer by setting tfr->effective_speed_hz.

See the following patch, which adds this feature to the SPI core for more
information:

    5d7e2b5ed585 spi: core: allow reporting the effectivly used speed_hz for a transfer

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20200917202420.1914104-1-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: omap2-mcspi: Improve performance waiting for CHSTAT

This reverts commit 13d515c796 (spi: omap2-mcspi: Switch to
readl_poll_timeout()).

The amount of time spent polling for the MCSPI_CHSTAT bits to be set on
AM335x-icev2 platform is less than 1us (about 0.6us) in most cases, with
or without using DMA. So, in most cases the function need not sleep.
Also, setting the sleep_usecs to zero would not be optimal here because
ktime_add_us() used in readl_poll_timeout() is slower compared to the
direct addition used after the revert. So, it is sub-optimal to use
readl_poll_timeout in this case.

When DMA is not enabled, this revert results in an increase of about 27%
in throughput and decrease of about 20% in CPU usage. However, the CPU
usage and throughput are almost the same when used with DMA.

Therefore, fix this by reverting the commit which switched to using
readl_poll_timeout().

Fixes: 13d515c796ad ("spi: omap2-mcspi: Switch to readl_poll_timeout()")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20200910122624.8769-1-a-govindraju@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: npcm-fiu: simplify the return expression of npcm_fiu_probe()

Simplify the return expression.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20200921131106.93228-1-miaoqinglang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi/topcliff-pch: drop double zeroing

sg_init_table zeroes its first argument, so the allocation of that argument
doesn't have to.

the semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,n,flags;
@@

x =
- kcalloc
+ kmalloc_array
  (n,sizeof(*x),flags)
...
sg_init_table(x,n)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1600601186-7420-12-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series "spi: Fixes for FSI-attached controller" from Eddie James <eajames@linux.ibm.com>:

This series implements a number of fixes for the FSI-attached SPI
controller driver.

Changes since v1:
 - Switch to a new compatible string for the restricted version of the
   SPI controller, rather than a new boolean parameter.

Brad Bishop (3):
  spi: fsi: Handle 9 to 15 byte transfers lengths
  spi: fsi: Fix clock running too fast
  spi: fsi: Fix use of the bneq+ sequencer instruction

Eddie James (3):
  dt-bindings: fsi: fsi2spi: Add compatible string for restricted
    version
  spi: fsi: Implement restricted size for certain controllers
  spi: fsi: Check mux status before transfers

 .../devicetree/bindings/fsi/ibm,fsi2spi.yaml  |   1 +
 drivers/spi/spi-fsi.c                         | 139 ++++++++++++++----
 2 files changed, 109 insertions(+), 31 deletions(-)

--
2.26.2

spi: dw-pci: free previously allocated IRQs if desc->setup() fails

Free previously allocated IRQs when return an error code of desc->setup()
which is not always successful. And simplify the code by adding a goto
label.

Fixes: 8f5c285f3ef5 ("SPI: designware: pci: Switch over to MSI interrupts")
CC: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1600132969-53037-1-git-send-email-f.fangjian@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: spi-nxp-fspi: Add ACPI support

Currently NXP fspi  driver has support of DT only. Adding ACPI
support to the driver so that it can be used by UEFI firmware
booting in ACPI mode. This driver will be probed if any firmware
will expose HID "NXP0009" in DSDT table.

Signed-off-by: kuldip dwivedi <kuldip.dwivedi@puresoftware.com>
Reviewed-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Link: https://lore.kernel.org/r/20200911130331.6313-1-kuldip.dwivedi@puresoftware.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: lantiq: remove redundant irqsave and irqrestore in hardIRQ

Running in hardIRQ, disabling irq is redundant.

Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lore.kernel.org/r/20200916101042.21860-1-song.bao.hua@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: xilinx: Fix info message during probe

The info message was showing the mapped address of the device. To avoid
security problems, all virtual addresses are converted to __ptrval__, so
the message was useless/ugly:

[    2.304949] xilinx_spi b0010000.spi-flash: at 0xB0010000 mapped to 0x(____ptrval____), irq=37

Use %pR instead:

[   15.021354] xilinx_spi b0010000.spi-flash: at [mem 0xb0010000-0xb001ffff], irq=37

Signed-off-by: Ricardo Ribalda <ribalda@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20200915112936.320647-1-ribalda@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: fsi: fsi2spi: Add compatible string for restricted version

Add a compatible string for the restricted version of the SPI controller.
The restricted version cannot process sequence loop operations and
therefore has a smaller transfer size.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20200909222857.28653-5-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: fsi: Check mux status before transfers

The SPI controllers are not accessible if the mux isn't set. Therefore,
check the mux status before starting a transfer and fail out if it isn't
set.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200909222857.28653-7-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: fsi: Implement restricted size for certain controllers

Some of the FSI-attached SPI controllers cannot use the loop command in
programming the sequencer due to security requirements. Check the
devicetree compatibility that indicates this condition and restrict the
size for these controllers. Also, add more transfers directly in the
sequence up to the length of the sequence register.

Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200909222857.28653-6-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: fsi: Fix use of the bneq+ sequencer instruction

All of the switches in N2_count_control in the counter configuration are
required to make the branch if not equal and increment command work.
Set them when using bneq+.

A side effect of this mode requires a dummy write to TDR when both
transmitting and receiving otherwise the controller won't start shifting
receive data.

It is likely not possible to avoid TDR underrun errors in this mode and
they are harmless, so do not check for them.

Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver")
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200909222857.28653-4-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: fsi: Fix clock running too fast

Use a clock divider tuned to a 200MHz FSI bus frequency (the maximum). Use
of the previous divider at 200MHz results in corrupt data from endpoint
devices. Ideally the clock divider would be calculated from the FSI clock,
but that would require some significant work on the FSI driver. With FSI
frequencies slower than 200MHz, the SPI clock will simply run slower, but
safely.

Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200909222857.28653-3-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: fsi: Handle 9 to 15 byte transfers lengths

The trailing <len> - 8 bytes of transfer data in this size range is no
longer ignored.

Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver")
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20200909222857.28653-2-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: sprd: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://lore.kernel.org/r/20200910160706.5883-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: spi-geni-qcom: Don't wait to start 1st transfer if transmitting

If we're sending bytes over SPI, we know the FIFO is empty at the
start of the transfer.  There's no reason to wait for the interrupt
telling us to start--we can just start right away.  Then if we
transmit everything in one swell foop we don't even need to bother
listening for TX interrupts.

In a test of "flashrom -p ec -r /tmp/foo.bin" interrupts were reduced
from ~30560 to ~29730, about a 3% savings.

This patch looks bigger than it is because I moved a few functions
rather than adding a forward declaration.  The only actual change to
geni_spi_handle_tx() was to make it return a bool indicating if there
is more to tx.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200912111716.1.Ied5e843fad0d6b733a1fb8bcfb364dd2fa889eb3@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: bcm2835: Make polling_limit_us static

This eliminates the following sparse warning:

drivers/spi/spi-bcm2835.c:78:14: warning: symbol 'polling_limit_us' was
not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200912072211.602735-1-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: spi-fsl-dspi: use XSPI mode instead of DMA for DPAA2 SoCs

The arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi device tree lacks DMA
channels for DSPI, so naturally, the driver fails to probe:

[ 2.945302] fsl-dspi 2100000.spi: rx dma channel not available
[ 2.951134] fsl-dspi 2100000.spi: can't get dma channels

In retrospect, this should have been obvious, because LS2080A, LS2085A
LS2088A and LX2160A don't appear to have an eDMA module at all. Looking
again at their datasheets, the CTARE register (which is specific to XSPI
functionality) seems to be documented, so switch them to XSPI mode
instead.

Fixes: 0feaf8f5afe0 ("spi: spi-fsl-dspi: Convert the instantiations that support it to DMA")
Reported-by: Qiang Zhao <qiang.zhao@nxp.com>
Tested-by: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200910121532.1138596-1-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: spi-geni-qcom: Don't program CS_TOGGLE again and again

We always toggle the chip select manually in spi-geni-qcom so that we
can properly implement the Linux API.  There's no reason to program
this to the hardware on every transfer.  Program it once at init and
be done with it.

This saves some part of a microsecond of overhead on each transfer.
While not really noticeable on any real world benchmarks, we might as
well save the time.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200912140730.2.I33e571179986850b4ec17042e813d0b08fb1b9c1@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: spi-geni-qcom: Use the FIFO even more

In commit 902481a78ee4 ("spi: spi-geni-qcom: Actually use our FIFO") I
explained that the maximum size we could program the FIFO was
"mas->tx_fifo_depth - 3" but that I chose "mas->tx_fifo_depth()"
because I was worried about decreased bandwidth.

Since that time:
* All the interconnect patches have landed, making things run at the
  proper speed.
* I've done more measurements.

This lets me confirm that there's really no downside of using the FIFO
more.  Specifically I did "flashrom -p ec -r /tmp/foo.bin" on a
Chromebook and averaged over several runs.

Before: It took 6.66 seconds and 59669 interrupts fired.
After:  It took 6.66 seconds and 47992 interrupts fired.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200912140730.1.Ie67fa32009b94702d56232c064f1d89065ee8836@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: spi-qcom-qspi: replace spin_lock_irqsave by spin_lock in hard IRQ

It is redundant to do irqsave and irqrestore in hardIRQ context.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lore.kernel.org/r/20200910100246.32696-1-song.bao.hua@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: Add compatible string for brcmstb SoCs

Add compatible string for brcmstb 7445 SoCs.

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200910152539.45584-1-ray.jui@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: bcm-qspi: Clean up 7425, 7429, and 7435 settings

The Broadcom QSPI driver now falls back to no MSPI_DEV support as the
default setting in the generic compatible string, explicit settings for
STB chips 7425, 7429, and 7435 can be removed.

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200910152539.45584-4-ray.jui@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: bcm-qspi: Fix probe regression on iProc platforms

iProc chips have QSPI controller that does not have the MSPI_REV
offset. Reading from that offset will cause a bus error. Fix it by
having MSPI_REV query disabled in the generic compatible string.

Fixes: 3a01f04d74ef ("spi: bcm-qspi: Handle lack of MSPI_REV offset")
Link: https://lore.kernel.org/linux-arm-kernel/20200909211857.4144718-1-f.fainelli@gmail.com/T/#u
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200910152539.45584-3-ray.jui@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: bcm-qspi: Add compatible string for BRCMSTB 7445 SoCs

Add compatible string for BRCMSTB 7445 SoCs and indicate it has MSPI rev
support.

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200910152539.45584-2-ray.jui@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: qup: remove redundant assignment to variable ret

The variable ret is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200910150410.750959-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series "opp: Unconditionally call dev_pm_opp_of_remove_table()" from Viresh Kumar <viresh.kumar@linaro.org>:

Hello,

This cleans up some of the user code around calls to
dev_pm_opp_of_remove_table().

All the patches can be picked by respective maintainers directly except
for the last patch, which needs the previous two to get merged first.

These are based for 5.9-rc1.

Rajendra, Since most of these changes are related to qcom stuff, it
would be great if you can give them a try. I wasn't able to test them
due to lack of hardware.

Ulf, I had to revise the sdhci patch, sorry about that. Please pick this
one.

Diff between V1 and V2 is mentioned in each of the patches separately.

Viresh Kumar (8):
  cpufreq: imx6q: Unconditionally call dev_pm_opp_of_remove_table()
  drm/lima: Unconditionally call dev_pm_opp_of_remove_table()
  drm/msm: Unconditionally call dev_pm_opp_of_remove_table()
  mmc: sdhci-msm: Unconditionally call dev_pm_opp_of_remove_table()
  spi: spi-geni-qcom: Unconditionally call dev_pm_opp_of_remove_table()
  spi: spi-qcom-qspi: Unconditionally call dev_pm_opp_of_remove_table()
  tty: serial: qcom_geni_serial: Unconditionally call
    dev_pm_opp_of_remove_table()
  qcom-geni-se: remove has_opp_table

 drivers/cpufreq/imx6q-cpufreq.c         | 10 ++--------
 drivers/gpu/drm/lima/lima_devfreq.c     |  6 +-----
 drivers/gpu/drm/lima/lima_devfreq.h     |  1 -
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 14 +++++---------
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h |  1 -
 drivers/gpu/drm/msm/dsi/dsi_host.c      |  8 ++------
 drivers/mmc/host/sdhci-msm.c            | 14 +++++---------
 drivers/spi/spi-geni-qcom.c             | 13 +++++--------
 drivers/spi/spi-qcom-qspi.c             | 15 ++++++---------
 drivers/tty/serial/qcom_geni_serial.c   | 13 +++++--------
 include/linux/qcom-geni-se.h            |  2 --
 11 files changed, 31 insertions(+), 66 deletions(-)

base-commit: f4d51dffc6c01a9e94650d95ce0104964f8ae822
--
2.25.0.rc1.19.g042ed3e048af

spi: spidev: Remove redundant initialization of variable status

In spidev_read() and spidev_write(), the variable status is being
initialized with a value that is never read and it is being updated
later with a new value. The initialization is redundant and can be
removed.

Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1599631704-53232-1-git-send-email-f.fangjian@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: spi-qcom-qspi: Unconditionally call dev_pm_opp_of_remove_table()

dev_pm_opp_of_remove_table() doesn't report any errors when it fails to
find the OPP table with error -ENODEV (i.e. OPP table not present for
the device). And we can call dev_pm_opp_of_remove_table()
unconditionally here.

While at it, create a new label and put clkname on errors.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/b77aa0bbe82a580508e321a34da488b4b27966d0.1598594714.git.viresh.kumar@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: spi-geni-qcom: Unconditionally call dev_pm_opp_of_remove_table()

dev_pm_opp_of_remove_table() doesn't report any errors when it fails to
find the OPP table with error -ENODEV (i.e. OPP table not present for
the device). And we can call dev_pm_opp_of_remove_table()
unconditionally here.

While at it, create a new label and put clkname on errors.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/ea0864d41277e61fa31d304fbd4cf9af6b314269.1598594714.git.viresh.kumar@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge series "spi: Adding support for Microchip Sparx5 SoC" from Lars Povlsen <lars.povlsen@microchip.com>:

The series add support for the Sparx5 SoC SPI controller in the
spi-dw-mmio.c spi driver.

v5 changes:
- rx-sample-delay-ns documentation changes from Rob Herring:
 - Drop superfluous type $ref
 - Add default value = 0

v4 changes:
- Changed snps,rx-sample-delay-ns to snps,rx-sample-delay-ns
  suggested by Rob Herring (rockchip also has this property).
- Added support for controller-level rx-sample-delay-ns value as
  well as per SPI slave value (rockchip has controller-level property).
- Dropped internal mux in favor of suggested spi-mux to
  control bus inteface selection.

v3 changes:
- Added mux support for controlling SPI bus interface. This is new mux
  driver, bindings and added to sparx5 base DT.
- Removed "microchip,spi-interface2" property in favour of
  "mux-controls" property in SPI controller (sparx5 only).
- Changed dw_spi_sparx5_set_cs() to use the mux control instead of
  directly acessing "mux" register. Associated code/defines moved to mux
  driver.
- Changed dw_spi_sparx5_set_cs() to match other similar functions in
  signature and avoid explicit CS toggling.
- Spun off duplicated NAND device DT chunks into separate DT file.

v2 changes:
- Moved all RX sample delay into spi-dw-core.c, using
  the "snps,rx-sample-delay-ns" device property.
- Integrated Sparx5 support directly in spi-dw-mmio.c
- Changed SPI2 configuration to per-slave "microchip,spi-interface2"
  property.
- Added bindings to existing snps,dw-apb-ssi.yaml file
- Dropped patches for polled mode and SPI memory operations.

Lars Povlsen (6):
  spi: dw: Add support for RX sample delay register
  spi: dw: Add Microchip Sparx5 support
  arm64: dts: sparx5: Add SPI controller and associated mmio-mux
  dt-bindings: snps,dw-apb-ssi: Add sparx5 support, plus
    rx-sample-delay-ns property
  arm64: dts: sparx5: Add spi-nor support
  arm64: dts: sparx5: Add spi-nand devices

 .../bindings/spi/snps,dw-apb-ssi.yaml         | 21 ++++++
 arch/arm64/boot/dts/microchip/sparx5.dtsi     | 47 ++++++++++++-
 .../arm64/boot/dts/microchip/sparx5_nand.dtsi | 31 ++++++++
 .../boot/dts/microchip/sparx5_pcb125.dts      | 30 ++++++++
 .../boot/dts/microchip/sparx5_pcb134.dts      |  1 +
 .../dts/microchip/sparx5_pcb134_board.dtsi    | 16 +++++
 .../boot/dts/microchip/sparx5_pcb135.dts      |  1 +
 .../dts/microchip/sparx5_pcb135_board.dtsi    | 16 +++++
 drivers/spi/spi-dw-core.c                     | 26 +++++++
 drivers/spi/spi-dw-mmio.c                     | 70 ++++++++++++++++++-
 drivers/spi/spi-dw.h                          |  3 +
 11 files changed, 260 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/microchip/sparx5_nand.dtsi

--
2.27.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

spi: spi-mtk-nor: support standard spi properties

Use default supports_op() to support spi-[rt]x-bus-width properties.
And check dummy op's byte length instead of its bus width for output.

Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Link: https://lore.kernel.org/r/20200826091852.519138-1-ikjn@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: tegra20: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901152713.18629-11-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: tegra114: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901152713.18629-10-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: synquacer: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901152713.18629-9-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: stm32: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901152713.18629-8-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: qcom-qspi: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901152713.18629-7-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: spi-mux: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901152713.18629-6-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: cadence-quadspi: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901152713.18629-5-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: bcm2835: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200901152713.18629-4-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: atmel: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200901152713.18629-3-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: sprd: Release DMA channel also on probe deferral

If dma_request_chan() for TX channel fails with EPROBE_DEFER, the RX
channel would not be released and on next re-probe it would be requested
second time.

Fixes: 386119bc7be9 ("spi: sprd: spi: sprd: Add DMA mode support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://lore.kernel.org/r/20200901152713.18629-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

dt-bindings: snps, dw-apb-ssi: Add sparx5 support, plus rx-sample-delay-ns property

This has the following changes for the snps,dw-apb-ss DT bindings:

- Add "microchip,sparx5-spi" as the compatible for the Sparx5 SoC
  controller

- Add the property "rx-sample-delay-ns"

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200824203010.2033-5-lars.povlsen@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: dw: Add Microchip Sparx5 support

This adds SPI support for the Sparx5 SoC, which is using the MMIO
Designware SPI controller.

The Sparx5 differs from the Ocelot version in these areas:

 * The CS override is controlled by a new set of registers for
   this purpose.

 * The Sparx5 SPI controller has the RX sample delay register, and it
   must be configured for the (SPI NAND) device on SPI2.

 * The Sparx5 SPI controller has 2 different SPI bus interfaces on the
   same controller (don't ask...). The "spi-mux" driver should be used
   in conjunction with the SPI driver to select the appropriate bus.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200824203010.2033-3-lars.povlsen@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: dw: Add support for RX sample delay register

This add support for the RX_SAMPLE_DLY register. If enabled in the
Designware IP, it allows tuning of the rx data signal by means of an
internal rx sample fifo.

The register is controlled by the rx-sample-delay-ns DT property,
which is defined per SPI slave as well on controller level.

The controller level rx-sample-delay-ns will apply to all slaves
without the property explicitly defined.

The register is located at offset 0xf0, and if the option is not
enabled in the IP, changing the register will have no effect. The
register will only be written if any slave defines a nonzero value
(after scaling by the clock period).

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200824203010.2033-2-lars.povlsen@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: qup: Allow for compile-testing on !ARM

There seems no reason to restrict testing to ARM, so remove this
constraint to improve test coverage.

Build-tested with allyesconfig on x86.

Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Link: https://lore.kernel.org/r/20200904163709.110975-1-alex.dewar90@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Linux 5.9-rc4

Merge tag 'io_uring-5.9-2020-09-06' of git://git.kernel.dk/linux-block

Pull more io_uring fixes from Jens Axboe:
 "Two followup fixes. One is fixing a regression from this merge window,
  the other is two commits fixing cancelation of deferred requests.

  Both have gone through full testing, and both spawned a few new
  regression test additions to liburing.

   - Don't play games with const, properly store the output iovec and
     assign it as needed.

   - Deferred request cancelation fix (Pavel)"

* tag 'io_uring-5.9-2020-09-06' of git://git.kernel.dk/linux-block:
  io_uring: fix linked deferred ->files cancellation
  io_uring: fix cancel of deferred reqs with ->files
  io_uring: fix explicit async read/write mapping for large segments

Merge tag 'iommu-fixes-v5.9-rc3' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

 - three Intel VT-d fixes to fix address handling on 32bit, fix a NULL
   pointer dereference bug and serialize a hardware register access as
   required by the VT-d spec.

 - two patches for AMD IOMMU to force AMD GPUs into translation mode
   when memory encryption is active and disallow using IOMMUv2
   functionality.  This makes the AMDGPU driver work when memory
   encryption is active.

 - two more fixes for AMD IOMMU to fix updating the Interrupt Remapping
   Table Entries.

 - MAINTAINERS file update for the Qualcom IOMMU driver.

* tag 'iommu-fixes-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Handle 36bit addressing for x86-32
  iommu/amd: Do not use IOMMUv2 functionality when SME is active
  iommu/amd: Do not force direct mapping when SME is active
  iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE
  iommu/amd: Restore IRTE.RemapEn bit after programming IRTE
  iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set()
  iommu/vt-d: Serialize IOMMU GCMD register modifications
  MAINTAINERS: Update QUALCOMM IOMMU after Arm SMMU drivers move

Merge tag 'x86-urgent-2020-09-06' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:

 - more generic entry code ABI fallout

 - debug register handling bugfixes

 - fix vmalloc mappings on 32-bit kernels

 - kprobes instrumentation output fix on 32-bit kernels

 - fix over-eager WARN_ON_ONCE() on !SMAP hardware

 - NUMA debugging fix

 - fix Clang related crash on !RETPOLINE kernels

* tag 'x86-urgent-2020-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry: Unbreak 32bit fast syscall
  x86/debug: Allow a single level of #DB recursion
  x86/entry: Fix AC assertion
  tracing/kprobes, x86/ptrace: Fix regs argument order for i386
  x86, fakenuma: Fix invalid starting node ID
  x86/mm/32: Bring back vmalloc faulting on x86_32
  x86/cmdline: Disable jump tables for cmdline.c

Merge tag 'for-linus-5.9-rc4-tag' of git://git./linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:
 "A small series for fixing a problem with Xen PVH guests when running
  as backends (e.g. as dom0).

  Mapping other guests' memory is now working via ZONE_DEVICE, thus not
  requiring to abuse the memory hotplug functionality for that purpose"

* tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: add helpers to allocate unpopulated memory
  memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC
  xen/balloon: add header guard

io_uring: fix linked deferred ->files cancellation

While looking for ->files in ->defer_list, consider that requests there
may actually be links.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: fix cancel of deferred reqs with ->files

While trying to cancel requests with ->files, it also should look for
requests in ->defer_list, otherwise it might end up hanging a thread.

Cancel all requests in ->defer_list up to the last request there with
matching ->files, that's needed to follow drain ordering semantics.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tags 'auxdisplay-for-linus-v5.9-rc4', 'clang-format-for-linus-v5.9-rc4' and 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux

Pull misc fixes from Miguel Ojeda:
 "A trivial patch for auxdisplay:

   - Replace HTTP links with HTTPS ones (Alexander A. Klimov)

  The usual clang-format trivial update:

   - Update with the latest for_each macro list (Miguel Ojeda)

  And Luc requested me to pick a sparse fix on my queue, so here it goes
  along with other two trivial Compiler Attributes ones (also from Luc).

   - sparse: use static inline for __chk_{user,io}_ptr() (Luc Van
     Oostenryck)

   - Compiler Attributes: fix comment concerning GCC 4.6 (Luc Van
     Oostenryck)

   - Compiler Attributes: remove comment about sparse not supporting
     __has_attribute (Luc Van Oostenryck)"

* tag 'auxdisplay-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
  auxdisplay: Replace HTTP links with HTTPS ones

* tag 'clang-format-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
  clang-format: Update with the latest for_each macro list

* tag 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
  sparse: use static inline for __chk_{user,io}_ptr()
  Compiler Attributes: fix comment concerning GCC 4.6
  Compiler Attributes: remove comment about sparse not supporting __has_attribute

Merge tag 'arc-5.9-rc4' of git://git./linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:

 - HSDK-4xd Dev system: perf driver updates for sampling interrupt

 - HSDK* Dev System: Ethernet broken [Evgeniy Didin]

 - HIGHMEM broken (2 memory banks) [Mike Rapoport]

 - show_regs() rewrite once and for all

 - Other minor fixes

* tag 'arc-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id
  arc: fix memory initialization for systems with two memory banks
  irqchip/eznps: Fix build error for !ARC700 builds
  ARC: show_regs: fix r12 printing and simplify
  ARC: HSDK: wireup perf irq
  ARC: perf: don't bail setup if pct irq missing in device-tree
  ARC: pgalloc.h: delete a duplicated word + other fixes

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "19 patches.

  Subsystems affected by this patch series: MAINTAINERS, ipc, fork,
  checkpatch, lib, and mm (memcg, slub, pagemap, madvise, migration,
  hugetlb)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  include/linux/log2.h: add missing () around n in roundup_pow_of_two()
  mm/khugepaged.c: fix khugepaged's request size in collapse_file
  mm/hugetlb: fix a race between hugetlb sysctl handlers
  mm/hugetlb: try preferred node first when alloc gigantic page from cma
  mm/migrate: preserve soft dirty in remove_migration_pte()
  mm/migrate: remove unnecessary is_zone_device_page() check
  mm/rmap: fixup copying of soft dirty and uffd ptes
  mm/migrate: fixup setting UFFD_WP flag
  mm: madvise: fix vma user-after-free
  checkpatch: fix the usage of capture group ( ... )
  fork: adjust sysctl_max_threads definition to match prototype
  ipc: adjust proc_ipc_sem_dointvec definition to match prototype
  mm: track page table modifications in __apply_to_page_range()
  MAINTAINERS: IA64: mark Status as Odd Fixes only
  MAINTAINERS: add LLVM maintainers
  MAINTAINERS: update Cavium/Marvell entries
  mm: slub: fix conversion of freelist_corrupted()
  mm: memcg: fix memcg reclaim soft lockup
  memcg: fix use-after-free in uncharge_batch

include/linux/log2.h: add missing () around n in roundup_pow_of_two()

Otherwise gcc generates warnings if the expression is complicated.

Fixes: 312a0c170945 ("[PATCH] LOG2: Alter roundup_pow_of_two() so that it can use a ilog2() on a constant")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/0-v1-8a2697e3c003+41165-log_brackets_jgg@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/khugepaged.c: fix khugepaged's request size in collapse_file

collapse_file() in khugepaged passes PAGE_SIZE as the number of pages to
be read to page_cache_sync_readahead().  The intent was probably to read
a single page.  Fix it to use the number of pages to the end of the
window instead.

Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Eric Biggers <ebiggers@google.com>
Link: https://lkml.kernel.org/r/20200903140844.14194-2-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: fix a race between hugetlb sysctl handlers

There is a race between the assignment of `table->data` and write value
to the pointer of `table->data` in the __do_proc_doulongvec_minmax() on
the other thread.

  CPU0:                                 CPU1:
                                        proc_sys_write
  hugetlb_sysctl_handler                  proc_sys_call_handler
  hugetlb_sysctl_handler_common             hugetlb_sysctl_handler
    table->data = &tmp;                       hugetlb_sysctl_handler_common
                                                table->data = &tmp;
      proc_doulongvec_minmax
        do_proc_doulongvec_minmax           sysctl_head_finish
          __do_proc_doulongvec_minmax         unuse_table
            i = table->data;
            *i = val;  // corrupt CPU1's stack

Fix this by duplicating the `table`, and only update the duplicate of
it.  And introduce a helper of proc_hugetlb_doulongvec_minmax() to
simplify the code.

The following oops was seen:

    BUG: kernel NULL pointer dereference, address: 0000000000000000
    #PF: supervisor instruction fetch in kernel mode
    #PF: error_code(0x0010) - not-present page
    Code: Bad RIP value.
    ...
    Call Trace:
     ? set_max_huge_pages+0x3da/0x4f0
     ? alloc_pool_huge_page+0x150/0x150
     ? proc_doulongvec_minmax+0x46/0x60
     ? hugetlb_sysctl_handler_common+0x1c7/0x200
     ? nr_hugepages_store+0x20/0x20
     ? copy_fd_bitmaps+0x170/0x170
     ? hugetlb_sysctl_handler+0x1e/0x20
     ? proc_sys_call_handler+0x2f1/0x300
     ? unregister_sysctl_table+0xb0/0xb0
     ? __fd_install+0x78/0x100
     ? proc_sys_write+0x14/0x20
     ? __vfs_write+0x4d/0x90
     ? vfs_write+0xef/0x240
     ? ksys_write+0xc0/0x160
     ? __ia32_sys_read+0x50/0x50
     ? __close_fd+0x129/0x150
     ? __x64_sys_write+0x43/0x50
     ? do_syscall_64+0x6c/0x200
     ? entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: e5ff215941d5 ("hugetlb: multiple hstates for multiple page sizes")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20200828031146.43035-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: try preferred node first when alloc gigantic page from cma

Since commit cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic
hugepages using cma"), the gigantic page would be allocated from node
which is not the preferred node, although there are pages available from
that node.  The reason is that the nid parameter has been ignored in
alloc_gigantic_page().

Besides, the __GFP_THISNODE also need be checked if user required to
alloc only from the preferred node.

After this patch, the preferred node is tried first before other allowed
nodes, and don't try to allocate from other nodes if __GFP_THISNODE is
specified.  If user don't specify the preferred node, the current node
will be used as preferred node, which makes sure consistent behavior of
allocating gigantic and non-gigantic hugetlb page.

Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Link: https://lkml.kernel.org/r/20200902025016.697260-1-lixinhai.lxh@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/migrate: preserve soft dirty in remove_migration_pte()

The code to remove a migration PTE and replace it with a device private
PTE was not copying the soft dirty bit from the migration entry.  This
could lead to page contents not being marked dirty when faulting the page
back from device private memory.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Link: https://lkml.kernel.org/r/20200831212222.22409-3-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/migrate: remove unnecessary is_zone_device_page() check

Patch series "mm/migrate: preserve soft dirty in remove_migration_pte()".

I happened to notice this from code inspection after seeing Alistair
Popple's patch ("mm/rmap: Fixup copying of soft dirty and uffd ptes").

This patch (of 2):

The check for is_zone_device_page() and is_device_private_page() is
unnecessary since the latter is sufficient to determine if the page is a
device private page.  Simplify the code for easier reading.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Link: https://lkml.kernel.org/r/20200831212222.22409-1-rcampbell@nvidia.com
Link: https://lkml.kernel.org/r/20200831212222.22409-2-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/rmap: fixup copying of soft dirty and uffd ptes

During memory migration a pte is temporarily replaced with a migration
swap pte.  Some pte bits from the existing mapping such as the soft-dirty
and uffd write-protect bits are preserved by copying these to the
temporary migration swap pte.

However these bits are not stored at the same location for swap and
non-swap ptes.  Therefore testing these bits requires using the
appropriate helper function for the given pte type.

Unfortunately several code locations were found where the wrong helper
function is being used to test soft_dirty and uffd_wp bits which leads to
them getting incorrectly set or cleared during page-migration.

Fix these by using the correct tests based on pte type.

Fixes: a5430dda8a3a ("mm/migrate: support un-addressable ZONE_DEVICE page in migration")
Fixes: 8c3328f1f36a ("mm/migrate: migrate_vma() unmap page from vma while collecting pages")
Fixes: f45ec5ff16a7 ("userfaultfd: wp: support swap and page migration")
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Alistair Popple <alistair@popple.id.au>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200825064232.10023-2-alistair@popple.id.au
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/migrate: fixup setting UFFD_WP flag

Commit f45ec5ff16a75 ("userfaultfd: wp: support swap and page migration")
introduced support for tracking the uffd wp bit during page migration.
However the non-swap PTE variant was used to set the flag for zone device
private pages which are a type of swap page.

This leads to corruption of the swap offset if the original PTE has the
uffd_wp flag set.

Fixes: f45ec5ff16a75 ("userfaultfd: wp: support swap and page migration")
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Link: https://lkml.kernel.org/r/20200825064232.10023-1-alistair@popple.id.au
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: madvise: fix vma user-after-free

The syzbot reported the below use-after-free:

  BUG: KASAN: use-after-free in madvise_willneed mm/madvise.c:293 [inline]
  BUG: KASAN: use-after-free in madvise_vma mm/madvise.c:942 [inline]
  BUG: KASAN: use-after-free in do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145
  Read of size 8 at addr ffff8880a6163eb0 by task syz-executor.0/9996

  CPU: 0 PID: 9996 Comm: syz-executor.0 Not tainted 5.9.0-rc1-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x18f/0x20d lib/dump_stack.c:118
    print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383
    __kasan_report mm/kasan/report.c:513 [inline]
    kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
    madvise_willneed mm/madvise.c:293 [inline]
    madvise_vma mm/madvise.c:942 [inline]
    do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145
    do_madvise mm/madvise.c:1169 [inline]
    __do_sys_madvise mm/madvise.c:1171 [inline]
    __se_sys_madvise mm/madvise.c:1169 [inline]
    __x64_sys_madvise+0xd9/0x110 mm/madvise.c:1169
    do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Allocated by task 9992:
    kmem_cache_alloc+0x138/0x3a0 mm/slab.c:3482
    vm_area_alloc+0x1c/0x110 kernel/fork.c:347
    mmap_region+0x8e5/0x1780 mm/mmap.c:1743
    do_mmap+0xcf9/0x11d0 mm/mmap.c:1545
    vm_mmap_pgoff+0x195/0x200 mm/util.c:506
    ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596
    do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Freed by task 9992:
    kmem_cache_free.part.0+0x67/0x1f0 mm/slab.c:3693
    remove_vma+0x132/0x170 mm/mmap.c:184
    remove_vma_list mm/mmap.c:2613 [inline]
    __do_munmap+0x743/0x1170 mm/mmap.c:2869
    do_munmap mm/mmap.c:2877 [inline]
    mmap_region+0x257/0x1780 mm/mmap.c:1716
    do_mmap+0xcf9/0x11d0 mm/mmap.c:1545
    vm_mmap_pgoff+0x195/0x200 mm/util.c:506
    ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596
    do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

It is because vma is accessed after releasing mmap_lock, but someone
else acquired the mmap_lock and the vma is gone.

Releasing mmap_lock after accessing vma should fix the problem.

Fixes: 692fe62433d4c ("mm: Handle MADV_WILLNEED through vfs_fadvise()")
Reported-by: syzbot+b90df26038d1d5d85c97@syzkaller.appspotmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org> [5.4+]
Link: https://lkml.kernel.org/r/20200816141204.162624-1-shy828301@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix the usage of capture group ( ... )

The usage of "capture group (...)" in the immediate condition after `&&`
results in `$1` being uninitialized.  This issues a warning "Use of
uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl
line 2638".

I noticed this bug while running checkpatch on the set of commits from
v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in
their commit message.

This bug was introduced in the script by commit e518e9a59ec3
("checkpatch: emit an error when there's a diff in a changelog").  It
has been in the script since then.

The author intended to store the match made by capture group in variable
`$1`.  This should have contained the name of the file as `[\w/]+`
matched.  However, this couldn't be accomplished due to usage of capture
group and `$1` in the same regular expression.

Fix this by placing the capture group in the condition before `&&`.
Thus, `$1` can be initialized to the text that capture group matches
thereby setting it to the desired and required value.

Fixes: e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog")
Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Joe Perches <joe@perches.com>
Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fork: adjust sysctl_max_threads definition to match prototype

Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer.  Adjust the
definition of sysctl_max_threads to match its prototype in
linux/sysctl.h which fixes the following sparse error/warning:

  kernel/fork.c:3050:47: warning: incorrect type in argument 3 (different address spaces)
  kernel/fork.c:3050:47:    expected void *
  kernel/fork.c:3050:47:    got void [noderef] __user *buffer
  kernel/fork.c:3036:5: error: symbol 'sysctl_max_threads' redeclared with different type (incompatible argument 3 (different address spaces)):
  kernel/fork.c:3036:5:    int extern [addressable] [signed] [toplevel] sysctl_max_threads( ... )
  kernel/fork.c: note: in included file (through include/linux/key.h, include/linux/cred.h, include/linux/sched/signal.h, include/linux/sched/cputime.h):
  include/linux/sysctl.h:242:5: note: previously declared as:
  include/linux/sysctl.h:242:5:    int extern [addressable] [signed] [toplevel] sysctl_max_threads( ... )

Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200825093647.24263-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc: adjust proc_ipc_sem_dointvec definition to match prototype

Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer.  Adjust the
signature of proc_ipc_sem_dointvec to match ctl_table.proc_handler which
fixes the following sparse error/warning:

  ipc/ipc_sysctl.c:94:47: warning: incorrect type in argument 3 (different address spaces)
  ipc/ipc_sysctl.c:94:47:    expected void *buffer
  ipc/ipc_sysctl.c:94:47:    got void [noderef] __user *buffer
  ipc/ipc_sysctl.c:194:35: warning: incorrect type in initializer (incompatible argument 3 (different address spaces))
  ipc/ipc_sysctl.c:194:35:    expected int ( [usertype] *proc_handler )( ... )
  ipc/ipc_sysctl.c:194:35:    got int ( * )( ... )

Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200825105846.5193-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: track page table modifications in __apply_to_page_range()

__apply_to_page_range() is also used to change and/or allocate
page-table pages in the vmalloc area of the address space.  Make sure
these changes get synchronized to other page-tables in the system by
calling arch_sync_kernel_mappings() when necessary.

The impact appears limited to x86-32, where apply_to_page_range may miss
updating the PMD.  That leads to explosions in drivers like

  BUG: unable to handle page fault for address: fe036000
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  *pde = 00000000
  Oops: 0002 [#1] SMP
  CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16
  Hardware name:  /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015
  EIP: __execlists_context_alloc+0x132/0x2d0 [i915]
  Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81
  EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001
  ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c
  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286
  CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0
  DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
  DR6: fffe0ff0 DR7: 00000400
  Call Trace:
    execlists_context_alloc+0x10/0x20 [i915]
    intel_context_alloc_state+0x3f/0x70 [i915]
    __intel_context_do_pin+0x117/0x170 [i915]
    i915_gem_do_execbuffer+0xcc7/0x2500 [i915]
    i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915]
    drm_ioctl_kernel+0x8f/0xd0
    drm_ioctl+0x223/0x3d0
    __ia32_sys_ioctl+0x1ab/0x760
    __do_fast_syscall_32+0x3f/0x70
    do_fast_syscall_32+0x29/0x60
    do_SYSENTER_32+0x15/0x20
    entry_SYSENTER_32+0x9f/0xf2
  EIP: 0xb7f28559
  Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76
  EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c
  ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8
  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296
  Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan
  CR2: 00000000fe036000

It looks like kasan, xen and i915 are vulnerable.

Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking
after 30-or-so minutes, and machine is unusable"

[sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h]
Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au
[chris@chris-wilson.co.uk: changelog addition]
[pavel@ucw.cz: changelog addition]

Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified")
Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32]
Tested-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org> [5.8+]
Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: IA64: mark Status as Odd Fixes only

IA64 isn't really being maintained, so mark it as Odd Fixes only.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/7e719139-450f-52c2-59a2-7964a34eda1f@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add LLVM maintainers

Nominate Nathan and myself to be point of contact for clang/LLVM related
support, after a poll at the LLVM BoF at Linux Plumbers Conf 2020.

While corporate sponsorship is beneficial, its important to not entrust
the keys to the nukes with any one entity.  Should Nathan and I find
ourselves at the same employer, I would gladly step down.

Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lkml.kernel.org/r/20200825143540.2948637-1-ndesaulniers@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update Cavium/Marvell entries

I am leaving Marvell and already do not have access to my @marvell.com
email address.  So switching over to my korg mail address or removing my
address there another maintainer is already listed.  For the entries
there no other maintainer is listed I will keep looking into patches for
Cavium systems for a while until someone from Marvell takes it over.

Since I might have limited access to hardware and also limited time I
changed state to 'Odd Fixes' for those entries.

Signed-off-by: Robert Richter <rric@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ganapatrao Kulkarni <gkulkarni@marvell.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
CC: Borislav Petkov <bp@alien8.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Wolfram Sang <wsa@kernel.org>,
Link: https://lkml.kernel.org/r/20200824122050.31164-1-rric@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: slub: fix conversion of freelist_corrupted()

Commit 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in
deactivate_slab()") suffered an update when picked up from LKML [1].

Specifically, relocating 'freelist = NULL' into 'freelist_corrupted()'
created a no-op statement.  Fix it by sticking to the behavior intended
in the original patch [1].  In addition, make freelist_corrupted()
immune to passing NULL instead of &freelist.

The issue has been spotted via static analysis and code review.

[1] https://lore.kernel.org/linux-mm/20200331031450.12182-1-dongli.zhang@oracle.com/

Fixes: 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in deactivate_slab()")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200824130643.10291-1-erosca@de.adit-jv.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: fix memcg reclaim soft lockup

We've met softlockup with "CONFIG_PREEMPT_NONE=y", when the target memcg
doesn't have any reclaimable memory.

It can be easily reproduced as below:

  watchdog: BUG: soft lockup - CPU#0 stuck for 111s![memcg_test:2204]
  CPU: 0 PID: 2204 Comm: memcg_test Not tainted 5.9.0-rc2+ #12
  Call Trace:
    shrink_lruvec+0x49f/0x640
    shrink_node+0x2a6/0x6f0
    do_try_to_free_pages+0xe9/0x3e0
    try_to_free_mem_cgroup_pages+0xef/0x1f0
    try_charge+0x2c1/0x750
    mem_cgroup_charge+0xd7/0x240
    __add_to_page_cache_locked+0x2fd/0x370
    add_to_page_cache_lru+0x4a/0xc0
    pagecache_get_page+0x10b/0x2f0
    filemap_fault+0x661/0xad0
    ext4_filemap_fault+0x2c/0x40
    __do_fault+0x4d/0xf9
    handle_mm_fault+0x1080/0x1790

It only happens on our 1-vcpu instances, because there's no chance for
oom reaper to run to reclaim the to-be-killed process.

Add a cond_resched() at the upper shrink_node_memcgs() to solve this
issue, this will mean that we will get a scheduling point for each memcg
in the reclaimed hierarchy without any dependency on the reclaimable
memory in that memcg thus making it more predictable.

Suggested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/1598495549-67324-1-git-send-email-xlpang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: fix use-after-free in uncharge_batch

syzbot has reported an use-after-free in the uncharge_batch path

  BUG: KASAN: use-after-free in instrument_atomic_write include/linux/instrumented.h:71 [inline]
  BUG: KASAN: use-after-free in atomic64_sub_return include/asm-generic/atomic-instrumented.h:970 [inline]
  BUG: KASAN: use-after-free in atomic_long_sub_return include/asm-generic/atomic-long.h:113 [inline]
  BUG: KASAN: use-after-free in page_counter_cancel mm/page_counter.c:54 [inline]
  BUG: KASAN: use-after-free in page_counter_uncharge+0x3d/0xc0 mm/page_counter.c:155
  Write of size 8 at addr ffff8880371c0148 by task syz-executor.0/9304

  CPU: 0 PID: 9304 Comm: syz-executor.0 Not tainted 5.8.0-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x1f0/0x31e lib/dump_stack.c:118
    print_address_description+0x66/0x620 mm/kasan/report.c:383
    __kasan_report mm/kasan/report.c:513 [inline]
    kasan_report+0x132/0x1d0 mm/kasan/report.c:530
    check_memory_region_inline mm/kasan/generic.c:183 [inline]
    check_memory_region+0x2b5/0x2f0 mm/kasan/generic.c:192
    instrument_atomic_write include/linux/instrumented.h:71 [inline]
    atomic64_sub_return include/asm-generic/atomic-instrumented.h:970 [inline]
    atomic_long_sub_return include/asm-generic/atomic-long.h:113 [inline]
    page_counter_cancel mm/page_counter.c:54 [inline]
    page_counter_uncharge+0x3d/0xc0 mm/page_counter.c:155
    uncharge_batch+0x6c/0x350 mm/memcontrol.c:6764
    uncharge_page+0x115/0x430 mm/memcontrol.c:6796
    uncharge_list mm/memcontrol.c:6835 [inline]
    mem_cgroup_uncharge_list+0x70/0xe0 mm/memcontrol.c:6877
    release_pages+0x13a2/0x1550 mm/swap.c:911
    tlb_batch_pages_flush mm/mmu_gather.c:49 [inline]
    tlb_flush_mmu_free mm/mmu_gather.c:242 [inline]
    tlb_flush_mmu+0x780/0x910 mm/mmu_gather.c:249
    tlb_finish_mmu+0xcb/0x200 mm/mmu_gather.c:328
    exit_mmap+0x296/0x550 mm/mmap.c:3185
    __mmput+0x113/0x370 kernel/fork.c:1076
    exit_mm+0x4cd/0x550 kernel/exit.c:483
    do_exit+0x576/0x1f20 kernel/exit.c:793
    do_group_exit+0x161/0x2d0 kernel/exit.c:903
    get_signal+0x139b/0x1d30 kernel/signal.c:2743
    arch_do_signal+0x33/0x610 arch/x86/kernel/signal.c:811
    exit_to_user_mode_loop kernel/entry/common.c:135 [inline]
    exit_to_user_mode_prepare+0x8d/0x1b0 kernel/entry/common.c:166
    syscall_exit_to_user_mode+0x5e/0x1a0 kernel/entry/common.c:241
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Commit 1a3e1f40962c ("mm: memcontrol: decouple reference counting from
page accounting") reworked the memcg lifetime to be bound the the struct
page rather than charges.  It also removed the css_put_many from
uncharge_batch and that is causing the above splat.

uncharge_batch() is supposed to uncharge accumulated charges for all
pages freed from the same memcg.  The queuing is done by uncharge_page
which however drops the memcg reference after it adds charges to the
batch.  If the current page happens to be the last one holding the
reference for its memcg then the memcg is OK to go and the next page to
be freed will trigger batched uncharge which needs to access the memcg
which is gone already.

Fix the issue by taking a reference for the memcg in the current batch.

Fixes: 1a3e1f40962c ("mm: memcontrol: decouple reference counting from page accounting")
Reported-by: syzbot+b305848212deec86eabe@syzkaller.appspotmail.com
Reported-by: syzbot+b5ea6fb6f139c8b9482b@syzkaller.appspotmail.com
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Hugh Dickins <hughd@google.com>
Link: https://lkml.kernel.org/r/20200820090341.GC5033@dhcp22.suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'xfs-5.9-fixes-2' of git://git./fs/xfs/xfs-linux

Pull xfs fix from Darrick Wong:
 "Fix a broken metadata verifier that would incorrectly validate attr
  fork extents of a realtime file against the realtime volume"

* tag 'xfs-5.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix xfs_bmap_validate_extent_raw when checking attr fork of rt files

xfs: don't update mtime on COW faults

When running in a dax mode, if the user maps a page with MAP_PRIVATE and
PROT_WRITE, the xfs filesystem would incorrectly update ctime and mtime
when the user hits a COW fault.

This breaks building of the Linux kernel.  How to reproduce:

 1. extract the Linux kernel tree on dax-mounted xfs filesystem
 2. run make clean
 3. run make -j12
 4. run make -j12

at step 4, make would incorrectly rebuild the whole kernel (although it
was already built in step 3).

The reason for the breakage is that almost all object files depend on
objtool.  When we run objtool, it takes COW page fault on its .data
section, and these faults will incorrectly update the timestamp of the
objtool binary.  The updated timestamp causes make to rebuild the whole
tree.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: don't update mtime on COW faults

When running in a dax mode, if the user maps a page with MAP_PRIVATE and
PROT_WRITE, the ext2 filesystem would incorrectly update ctime and mtime
when the user hits a COW fault.

This breaks building of the Linux kernel.  How to reproduce:

 1. extract the Linux kernel tree on dax-mounted ext2 filesystem
 2. run make clean
 3. run make -j12
 4. run make -j12

at step 4, make would incorrectly rebuild the whole kernel (although it
was already built in step 3).

The reason for the breakage is that almost all object files depend on
objtool.  When we run objtool, it takes COW page fault on its .data
section, and these faults will incorrectly update the timestamp of the
objtool binary.  The updated timestamp causes make to rebuild the whole
tree.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

io_uring: fix explicit async read/write mapping for large segments

If we exceed UIO_FASTIOV, we don't handle the transition correctly
between an allocated vec for requests that are queued with IOSQE_ASYNC.
Store the iovec appropriately and re-set it in the iter iov in case
it changed.

Fixes: ff6165b2d7f6 ("io_uring: retain iov_iter state over io_read/io_write calls")
Reported-by: Nick Hill <nick@nickhill.org>
Tested-by: Norman Maurer <norman.maurer@googlemail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 's390-5.9-5' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

 - Fix GENERIC_LOCKBREAK dependency on PREEMPTION in Kconfig broken
   because of a typo

 - Update defconfigs

* tag 's390-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfigs
  s390: fix GENERIC_LOCKBREAK dependency typo in Kconfig

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

 - Fix the loading of modules built with binutils-2.35. This version
   produces writable and executable .text.ftrace_trampoline section
   which is rejected by the kernel.

 - Remove the exporting of cpu_logical_map() as the Tegra driver has now
   been fixed and no longer uses this function.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/module: set trampoline section flags regardless of CONFIG_DYNAMIC_FTRACE
  arm64: Remove exporting cpu_logical_map symbol

Merge tag 'mips_fixes_5.9_1' of git://git./linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:
 "A few MIPS fixes:

   - fallthrough fallout fix

   - BMIPS fixes

   - MSA fix to avoid leaking MSA register contents

   - Loongson perf and cpu feature fix

   - SNI interrupt fix"

* tag 'mips_fixes_5.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: SNI: Fix SCSI interrupt
  MIPS: add missing MSACSR and upper MSA initialization
  MIPS: perf: Fix wrong check condition of Loongson event IDs
  mips/oprofile: Fix fallthrough placement
  MIPS: Loongson64: Remove unnecessary inclusion of boot_param.h
  MIPS: BMIPS: Also call bmips_cpu_setup() for secondary cores
  MIPS: mm: BMIPS5000 has inclusive physical caches
  MIPS: Loongson64: Do not override watch and ejtag feature

Merge tag 'kbuild-fixes-v5.9-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix documents

 - fix warning in 'make localmodconfig'

* tag 'kbuild-fixes-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: remove redundant assignment prompt = prompt
  kbuild: Documentation: clean up makefiles.rst
  kconfig: streamline_config.pl: check defined(ENV variable) before using it
  Documentation/llvm: Improve formatting of commands, variables, and arguments