Konrad Dybcio [Mon, 26 Jun 2023 20:00:26 +0000 (22:00 +0200)]
arm64: dts: qcom: pm660l: Add missing short interrupt
Add the missing short interrupt. This fixes the schema warning:
wled@d800: interrupt-names: ['ovp'] is too short
Fixes:
7b56a804e58b ("arm64: dts: qcom: pm660l: Add WLED support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-4-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Mon, 26 Jun 2023 20:00:25 +0000 (22:00 +0200)]
arm64: dts: qcom: pm6150l: Add missing short interrupt
Add the missing short interrupt. This fixes the schema warning:
wled@d800: interrupt-names: ['ovp'] is too short
Fixes:
fe508ced49dd ("arm64: dts: qcom: pm6150l: Add wled node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-3-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:12 +0000 (19:15 +0200)]
arm64: dts: qcom: sdm850-c630: add missing panel supply
Panel bindings (boe,nv133fhm-n61) require supply which here actually can
be turned on/off via GPIO control:
sdm850-lenovo-yoga-c630.dtb: panel: 'power-supply' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230617171512.286795-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stephan Gerhold [Thu, 15 Jun 2023 16:50:44 +0000 (18:50 +0200)]
arm64: dts: qcom: Add rpm-proc node for GLINK gplatforms
Rather than having the RPM GLINK channels as the only child of a dummy
top-level rpm-glink node, switch to representing the RPM as remoteproc
like all the other remoteprocs (modem DSP, ...).
This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM6375
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-11-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stephan Gerhold [Thu, 15 Jun 2023 16:50:43 +0000 (18:50 +0200)]
arm64: dts: qcom: Add rpm-proc node for SMD platforms
Rather than having the RPM SMD channels as the only child of a dummy
SMD node, switch to representing the RPM as remoteproc like all the
other remoteprocs (WCNSS, modem DSP).
This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-10-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Praveenkumar I [Thu, 13 Jul 2023 08:31:01 +0000 (14:01 +0530)]
arm64: dts: qcom: ipq9574: Add cpu cooling maps
Add cpu cooling maps for passive trip points. The cpu cooling
device states are mapped to cpufreq based scaling frequencies.
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Link: https://lore.kernel.org/r/20230713083101.971525-2-quic_ipkumar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Wed, 12 Jul 2023 12:11:45 +0000 (15:11 +0300)]
arm64: dts: qcom: sm8450: provide MDSS cfg interconnect
Add support for the MDSS cfg-cpu bus vote on the SM8450 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230712121145.1994830-9-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Tue, 11 Jul 2023 06:30:11 +0000 (08:30 +0200)]
arm64: dts: qcom: sm8250-sony-xperia: correct GPIO keys wakeup again
gpio-keys,wakeup is a deprecated property:
m8250-sony-xperia-edo-pdx206.dtb: gpio-keys: key-camera-focus: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Fixes:
a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711063011.16222-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 11 Jul 2023 10:28:17 +0000 (12:28 +0200)]
arm64: dts: qcom: qrb2210-rb1: Add regulators
Add and assign RPM regulators coming from PM2250.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-rb1_regulator-v1-1-bc4398c35800@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 11 Jul 2023 11:00:53 +0000 (13:00 +0200)]
arm64: dts: qcom: sc7180: Bring back cpufreq-based DDR votes
ChromeOS folks reported that bwmon is too slow and getting rid of
statically defined CPUFREQ-based votes (effectively floor votes because of
how opp-peak-kBps is interpreted), has a major performance impact in some
common applications. Bring them back until MEMLAT support is introduced.
This is a partial revert of the commit referenced in the fixes tag.
Fixes:
adc16b84e1ea ("arm64: dts: qcom: sc7180: Hook up BWMONs")
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-7180ddr-v1-1-56e4f13afe9b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 11 Jul 2023 14:35:16 +0000 (16:35 +0200)]
arm64: dts: qcom: sm6350: Add BWMONs
Add the CPU and LLC BWMONs (skip the NPU ones for now) on sm6350.
There are 3 more NPU BWMONs, but these are skipped for now.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-sm638250_bwmon-v1-4-bd4bb96b0673@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 11 Jul 2023 14:35:15 +0000 (16:35 +0200)]
arm64: dts: qcom: sm8250: Add BWMONs
Add the CPU and LLC BWMONs (skip the NPU ones for now) on sm8250.
LPDDR4X levels are skipped, as LPDDR5 seems more popular with SM8250 and
voting for inexistent levels doesn't uptick the bus frequency, which
results in no increased bandwidth, which results in bwmon deciding we
shouldn't go higher.. you see the point!
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-sm638250_bwmon-v1-3-bd4bb96b0673@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Fri, 12 May 2023 00:13:34 +0000 (03:13 +0300)]
arm64: dts: qcom: msm8996: scale CBF clock according to the CPUfreq
Turn CBF into the interconnect provider. Scale CBF frequency (bandwidth)
according to CPU frequencies.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230512001334.2983048-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 4 Jul 2023 12:23:18 +0000 (14:23 +0200)]
arm64: dts: qcom: sm8250: Mark SMMUs as DMA coherent
The SMMUs on SM8250 are cache-coherent. Mark them as such.
Fixes:
a89441fcd09d ("arm64: dts: qcom: sm8250: add apps_smmu node")
Fixes:
04a3605b184e ("arm64: dts: qcom: add sm8250 GPU nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230704-topic-8250_pcie_dmac-v1-2-799603a980b0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 4 Jul 2023 12:23:17 +0000 (14:23 +0200)]
arm64: dts: qcom: sm8250: Mark PCIe hosts as DMA coherent
The PCIe hosts on SM8250 are cache-coherent. Mark them as such.
Fixes:
e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230704-topic-8250_pcie_dmac-v1-1-799603a980b0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Fri, 7 Jul 2023 12:30:27 +0000 (15:30 +0300)]
arm64: dts: qcom: sm8450-hdk: add ADC-TM thermal zones
Add thermal zones controlled through the ADC-TM (ADC thermal monitoring)
PMIC interface. This includes several onboard sensors and the XO thermal
sensor.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-9-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Fri, 7 Jul 2023 12:30:26 +0000 (15:30 +0300)]
arm64: dts: qcom: sm8450-hdk: define DIE_TEMP channels
Declare the DIE_TEMP channels provided by PMICs. Use them to provide
temperature reading for the spmi-temp-alarm thermal zones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-8-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Fri, 7 Jul 2023 12:30:25 +0000 (15:30 +0300)]
arm64: dts: qcom: sm8450-hdk: remove pmr735b PMIC inclusion
The 8450-HDK doesn't use PMR735B PMIC. Drop its inclusion to remove the
warning during the HDK bootup.
Fixes:
30464456a1ea ("arm64: dts: qcom: sm8450-hdk: add pmic files")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-7-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Fri, 7 Jul 2023 12:30:24 +0000 (15:30 +0300)]
arm64: dts: qcom: pmk8350: fix ADC-TM compatible string
The commit
b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for
pmk8350") for the ADC TM (thermal monitoring device) have used the
compatible string from the vendor kernel ("qcom,adc-tm7"). Use the
proper compatible string that is defined in the upstream kernel
("qcom,spmi-adc-tm5-gen2").
Fixes:
b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-6-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Fri, 7 Jul 2023 12:30:23 +0000 (15:30 +0300)]
arm64: dts: qcom: pmr735b: fix thermal zone name
The name of the thermal zone in pmr735b.dtsi (pmr735a-thermal) conflicts
with the thermal zone in pmr735a.dtsi. Rename the thermal zone according
to the chip name.
Fixes:
6f3426b3dea4 ("arm64: dts: qcom: pmr735b: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Fri, 7 Jul 2023 12:30:22 +0000 (15:30 +0300)]
arm64: dts: qcom: pm8350b: fix thermal zone name
The name of the thermal zone in pm8350b.dtsi (pm8350c-thermal) conflicts
with the thermal zone in pm8350c.dtsi. Rename the thermal zone according
to the chip name.
Fixes:
5c1399299d9d ("arm64: dts: qcom: pm8350b: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Fri, 7 Jul 2023 12:30:21 +0000 (15:30 +0300)]
arm64: dts: qcom: pm8350: fix thermal zone name
The name of the thermal zone in pm8350.dtsi (pm8350c-thermal) conflicts
with the thermal zone in pm8350c.dtsi. Rename the thermal zone according
to the chip name.
Fixes:
7a79b95f4288 ("arm64: dts: qcom: pm8350: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Thu, 6 Jul 2023 16:35:37 +0000 (18:35 +0200)]
arm64: dts: qcom: sm8350: Use proper CPU compatibles
The Kryo names (once again) turned out to be fake. The CPUs report:
0x412fd050 (CA55 r2p0) (0 - 3)
0x411fd410 (CA78 r1p1) (4 - 6)
0x411fd440 (CX1 r1p1) (7)
Use the compatibles that reflect that.
Fixes:
b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230706-topic-sm8350-cpu-compat-v1-1-f8d6a1869781@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 5 Jul 2023 15:00:05 +0000 (17:00 +0200)]
arm64: dts: qcom: sc8180x: Fix cluster PSCI suspend param
The value was copypasted from 8150, but 8180 expects a different one.
Confirmed with both downstream device tree and Windows DSDT, not tested
on hardware (sorry, I don't have any).
Fix it.
Fixes:
8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230705-topic-8180_sleep-v1-1-c5dce117364e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Wed, 5 Jul 2023 14:42:26 +0000 (16:42 +0200)]
arm64: dts: qcom: add missing space before {
Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705144226.280490-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 5 Jul 2023 13:36:23 +0000 (15:36 +0200)]
arm64: dts: qcom: sm8350: Add missing LMH interrupts to cpufreq
Add the missing interrupts that communicate the hardware-managed
throttling to Linux.
Fixes:
ccbb3abb23a5 ("arm64: dts: qcom: sm8350: Add cpufreq node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-3-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 5 Jul 2023 13:36:22 +0000 (15:36 +0200)]
arm64: dts: qcom: sm8350: Fix CPU idle state residency times
The present values look to have been copypasted from 8150 or 8180.
Fix that.
Fixes:
07ddb302811e ("arm64: dts: qcom: sm8350: Add CPU topology and idle-states")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-2-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 5 Jul 2023 13:36:21 +0000 (15:36 +0200)]
arm64: dts: qcom: sm8350: Add missing cluster sleep state
SM8350's cores can be shut off, without engaging full-on SoC-wide power
collapse. Add the missing idle state to allow for that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-1-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Komal Bajaj [Wed, 5 Jul 2023 09:17:30 +0000 (14:47 +0530)]
arm64: dts: qcom: qru1000-idp: Add reserved gpio list
Add reserve gpios for QRU1000 IDP platform. These gpios are
needed for modem subsystem.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705091730.32087-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Komal Bajaj [Wed, 5 Jul 2023 09:17:29 +0000 (14:47 +0530)]
arm64: dts: qcom: qdu1000-idp: Add reserved gpio list
Add reserve gpios for QDU1000 IDP platform. These gpios are
needed for modem subsystem.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705091730.32087-2-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sun, 2 Jul 2023 18:50:50 +0000 (20:50 +0200)]
arm64: dts: qcom: minor whitespace cleanup around '='
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230702185051.43867-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 27 Jun 2023 17:28:52 +0000 (19:28 +0200)]
arm64: dts: qcom: msm8998: Provide XO to RPMCC
The RPMCC node should be fed a reference to the XO fixed clock.
Do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230627-topic-98_rpmcc-v1-1-4024e43ad0fc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 27 Jun 2023 17:27:50 +0000 (19:27 +0200)]
arm64: dts: qcom: sdm845-tama: Set serial indices and stdout-path
UART6 is used for debug (routed via uSD pins) and UART9 is connected
to the bluetooth chip.
Set indexed aliases to make the GENI UART driver happy and route serial
traffic through the debug uart by default.
Fixes:
30a7f99befc6 ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230627-topic-tama_uart-v1-1-0fa790248db8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 27 Jun 2023 16:24:27 +0000 (18:24 +0200)]
arm64: dts: qcom: msm8996: Add missing interrupt to the USB2 controller
The interrupt line was previously not described. Take care of that.
Fixes:
1e39255ed29d ("arm64: dts: msm8996: Add device node for qcom,dwc3")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-11-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 27 Jun 2023 16:24:20 +0000 (18:24 +0200)]
arm64: dts: qcom: apq8039-t2: Drop inexistent property
'pin-switch-delay-us' is not used anywhere in the mainline kernel.
Drop it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-4-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 27 Jun 2023 16:24:19 +0000 (18:24 +0200)]
arm64: dts: qcom: msm8939: Add missing 'cache-unified' to L2
Add the missing property to fix the dt checker warning:
qcom/apq8039-t2.dtb: l2-cache: 'cache-unified' is a required property
Fixes:
61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-3-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 27 Jun 2023 16:24:18 +0000 (18:24 +0200)]
arm64: dts: qcom: msm8939: Drop "qcom,idle-state-spc" compatible
As of today, the only cool and legal way to get ARM64 SMP going is
via PSCI (or spin tables). Sadly, not all chip and device vendors were
considerate of this in the early days of arm64. Qualcomm, for example
reused their tried-and-true spin-up method from MSM8974 and their Krait/
arm32 Cortex designs.
MSM8916 supports SMP with its arm32 dt overlay, as probably could 8939.
But the arm64 DT should not define non-PSCI SMP or CPUidle stuff.
Drop the qcom,idle-state-spc compatible (associated with Qualcomm-specific
CPUIdle) to make the dt checker happy:
apq8039-t2.dtb: idle-states: cpu-sleep-0:compatible:
['qcom,idle-state-spc', 'arm,idle-state'] is too long
Fixes:
61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Benjamin Li <benl@squareup.com>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-2-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 27 Jun 2023 16:24:17 +0000 (18:24 +0200)]
arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
Commit
2b616f86d51b ("arm64: dts: qcom: sc7180: rename labels for DSI
nodes") broke reg-names, possibly with search-and-replace. Fix it.
Fixes:
2b616f86d51b ("arm64: dts: qcom: sc7180: rename labels for DSI nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-1-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 27 Jun 2023 14:07:37 +0000 (16:07 +0200)]
arm64: dts: qcom: sm6375: Set up L3 scaling
Add the CPU OPP tables including core frequency and L3 bus frequency.
The L3 throughput values were chosen by studying the frequencies
available in HW LUT and picking the highest one that's less than the
CPU frequency. They will be replaced with a dynamic, bwmon-style
decision maker once support for MEMLAT is introduced upstream.
Available values from the HW LUT:
300000
556800
652800
768000
844800
921600
1171200
1382400
1497600
This commit dramatically improves overall performance of the system.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-6375_l3-v1-1-9cb03ef05150@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Johan Hovold [Tue, 27 Jun 2023 08:53:06 +0000 (10:53 +0200)]
arm64: dts: qcom: sc8280xp-pmics: add explicit rtc interrupt parent
Unless explicitly specified the interrupt-parent property is inherited
from the parent node on Linux even though this may not be in full
compliance with the devicetree specification.
Following commit
2d5cab9232ba ("arm64: dts: qcom: sc8280xp-pmics:
Specify interrupt parent explicitly"), add an explicit interrupt parent
also for the PMIC RTC node for the benefit of other operating systems
which may be confused by this omission.
Note that any such OS must still implement a fallback to the root
interrupt domain as most devicetrees are written under the assumption
that the interrupt parent is inherited.
Reported-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627085306.6033-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Luca Weiss [Tue, 27 Jun 2023 08:28:05 +0000 (10:28 +0200)]
arm64: dts: qcom: sm8450: Use standalone ICE node for UFS
With the ICE driver now merged let's convert the ufs node to use the new
style.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221209-dt-binding-ufs-v5-5-c9a58c0a53f5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rob Herring [Mon, 26 Jun 2023 22:09:57 +0000 (16:09 -0600)]
arm64: dts: qcom: Fix "status" value
The defined value for "status" is "disabled", not "disable".
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626220957.3945972-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bjorn Andersson [Mon, 10 Jul 2023 04:31:42 +0000 (21:31 -0700)]
Merge branch '
20230620-topic-sc8280_gccgdsc-v2-2-
562c1428c10d@linaro.org' into arm64-for-6.6
Merge a set of new SC8280XP GCC GDSC constants from a topic branch,
in order to allow them being used in DeviceTree source.
Konrad Dybcio [Mon, 26 Jun 2023 17:48:07 +0000 (19:48 +0200)]
dt-bindings: clock: qcom,gcc-sc8280xp: Add missing GDSCs
There are 10 more GDSCs that we've not been caring about, and by extension
(and perhaps even more importantly), not putting to sleep. Add them.
Fixes:
a66a82f2a55e ("dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-2-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Luca Weiss [Sun, 25 Jun 2023 11:13:05 +0000 (13:13 +0200)]
arm64: dts: qcom: pm8953: Add thermal zone
Define the themal zones using the temperature values found in the
downstream 4.9 sources so that the spmi-temp-alarm driver becomes
active.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230625-pm8953-thermal-v1-1-2b4247d2f769@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Sridharan S N [Fri, 23 Jun 2023 09:00:01 +0000 (14:30 +0530)]
arm64: dts: qcom: ipq5332: Add common RDP dtsi file
Add a dtsi file to include interfaces that are common
across IPQ5332 RDPs.
Signed-off-by: Sridharan S N <quic_sridsn@quicinc.com>
Link: https://lore.kernel.org/r/20230623090001.27778-1-quic_sridsn@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Thu, 22 Jun 2023 15:56:16 +0000 (17:56 +0200)]
arm64: dts: qcom: sc8280xp: Add missing SCM interconnect
The SCM interconnect path was missing. Add it.
Fixes:
152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230622-topic-8280scmicc-v1-2-6ef318919ea5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bartosz Golaszewski [Thu, 22 Jun 2023 12:01:42 +0000 (14:01 +0200)]
arm64: dts: qcom: sa8775p-ride: enable ethernet0
Enable the first 1Gb ethernet port on sa8775p-ride development board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-6-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bartosz Golaszewski [Thu, 22 Jun 2023 12:01:41 +0000 (14:01 +0200)]
arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
Add the MDC and MDIO pin functions for ethernet0 on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-5-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bartosz Golaszewski [Thu, 22 Jun 2023 12:01:40 +0000 (14:01 +0200)]
arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
Enable the internal PHY on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-4-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bartosz Golaszewski [Thu, 22 Jun 2023 12:01:39 +0000 (14:01 +0200)]
arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface
Add the node for the first ethernet interface on sa8775p platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-3-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bartosz Golaszewski [Thu, 22 Jun 2023 12:01:38 +0000 (14:01 +0200)]
arm64: dts: qcom: sa8775p: add the SGMII PHY node
Add the internal SGMII/SerDes PHY node for sa8775p platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Neil Armstrong [Thu, 22 Jun 2023 08:57:22 +0000 (10:57 +0200)]
arm64: dts: qcom: sdm845-mtp: add chassis-type property
Qualcomm's Mobile Test Platforms devices are handsets, set the
chassis-type property to 'handset'.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-5-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Neil Armstrong [Thu, 22 Jun 2023 08:57:21 +0000 (10:57 +0200)]
arm64: dts: qcom: msm89xx-mtp: add chassis-type property
Qualcomm's Mobile Test Platforms devices are handsets, set the
chassis-type property to 'handset'.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-4-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Neil Armstrong [Thu, 22 Jun 2023 08:57:20 +0000 (10:57 +0200)]
arm64: dts: qcom: sm8[1234]50-hdk: add chassis-type property
Qualcomm's Hardware Development Kits devices are embedded platforms,
set the chassis-type property to 'embedded'.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-3-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Neil Armstrong [Thu, 22 Jun 2023 08:57:19 +0000 (10:57 +0200)]
arm64: dts: qcom: sm8[45]50-qrd: add chassis-type property
Qualcomm's Reference Devices are handsets, set the chassis-type
property to 'handset'.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-2-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Neil Armstrong [Thu, 22 Jun 2023 08:57:18 +0000 (10:57 +0200)]
arm64: dts: qcom: sm8[1235]50-mtp: add chassis-type property
Qualcomm's Mobile Test Platforms devices are handsets, set the
chassis-type property to 'handset'.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-1-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Raymond Hackley [Thu, 22 Jun 2023 02:11:14 +0000 (02:11 +0000)]
arm64: dts: qcom: msm8939-sony-xperia-kanuti-tulip: Add missing 'chassis-type'
Sony Xperia M4 Aqua is a handset. Add the chassis-type = "handset"; to it.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622021105.66015-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 21 Jun 2023 11:21:55 +0000 (13:21 +0200)]
arm64: dts: qcom: qrb4210-rb2: Enable GPU
Enable the A610 GPU and provide a firmware path to the ZAP blob.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-gpu_tablet_disp-v2-4-0538ea1beb0b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 21 Jun 2023 11:21:54 +0000 (13:21 +0200)]
arm64: dts: qcom: sm6115p-j606f: Enable GPU
Enable the A610 GPU and provide a firmware path to the ZAP blob.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-gpu_tablet_disp-v2-3-0538ea1beb0b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 21 Jun 2023 11:21:53 +0000 (13:21 +0200)]
arm64: dts: qcom: sm6115p-j606f: Hook up display
Enable the required nodes, add the required pins and tweak a
regulator to enable non-simplefb display on the Tab P11.
Do note that there exists a second SKU with a different panel+touch
combo, but due to insufficient information, that will need to be
handled separately.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-gpu_tablet_disp-v2-2-0538ea1beb0b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 21 Jun 2023 11:21:52 +0000 (13:21 +0200)]
arm64: dts: qcom: sm6115: Add GPU nodes
Introduce nodes for the A610 GPU and its GMU wrapper along with the
speedbin fuse entry in QFPROM.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-gpu_tablet_disp-v2-1-0538ea1beb0b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bjorn Andersson [Tue, 20 Jun 2023 20:39:15 +0000 (13:39 -0700)]
arm64: dts: qcom: sc8280xp-crd: Fix naming of regulators
The external regulators in the CRD seems to have inherited their names
from the X13s DeviceTree, correct them.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230620203915.141337-2-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bjorn Andersson [Tue, 20 Jun 2023 20:39:14 +0000 (13:39 -0700)]
arm64: dts: qcom: sc8280xp-crd: Correct vreg_misc_3p3 GPIO
The vreg_misc_3p3 regulator is controlled by PMC8280_1 GPIO 2, not 1, on
the CRD.
Fixes:
ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620203915.141337-1-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 20 Jun 2023 11:05:37 +0000 (13:05 +0200)]
arm64: dts: qcom: sm8250-edo: Rectify gpio-keys
Set up the corresponding GPIOs properly and add the leftover hardware
buttons to mark this piece of the puzzle complete.
Fixes:
46e14907c716 ("arm64: dts: qcom: sm8250-edo: Add hardware keys")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-4-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 20 Jun 2023 11:05:36 +0000 (13:05 +0200)]
arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC
Xperia 1 II / PRO use the Dialog SLG51000 PMIC for powering some camera
sensors. Add the required nodes to support it and remove its remnants
from -edo.dtsi, as it's absent on 5 II.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-3-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 20 Jun 2023 11:05:35 +0000 (13:05 +0200)]
arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX203&206 DTSIs to better document the hardware.
Diff between 203 and 206:
pm8009_gpios
< "CAM_PWR_LD_EN",
> "NC",
pm8150_gpios
< "NC",
> "G_ASSIST_N",
< "WLC_EN_N", /* GPIO_10 */
> "NC", /* GPIO_10 */
Which is due to 5 II having an additional Google Assistant hardware
button and 1 II having a wireless charger & different camera wiring
to accommodate the additional 3D iToF sensor.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-2-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Tue, 20 Jun 2023 11:05:34 +0000 (13:05 +0200)]
arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX203&206 DTSIs to better document the hardware.
Diff between 203 and 206:
< "CAM_PWR_A_CS",
> "FRONTC_PWR_EN",
< "CAM4_MCLK",
< "TOF_RST_N",
> "NC",
> "NC",
< "WLC_I2C_SDA",
< "WLC_I2C_SCL", /* GPIO_120 */
> "NC",
> "NC",
< "WLC_INT_N",
> "NC",
Which makes sense, as 203 has a 3D iToF, slightly different camera
power wiring and WLC (WireLess Charging).
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-1-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Jakob Hauser [Mon, 19 Jun 2023 20:37:43 +0000 (22:37 +0200)]
arm64: dts: qcom: msm8916-samsung-serranove: Add RT5033 PMIC with charger
For the regulators, apply the same settings as in the downstream
devicetree [1], including the "regulator-always-on" for the SAFE_LDO.
For the voltage of SAFE_LDO, however, there is only one voltage of 4.9 V
available in the mainline driver [2][3].
The values of the battery data evolve from following sources:
- precharge current: 450 mA corresponds to the default value of the chip. It
doesn't get changed by the downstream Android driver. Therefore let's stick
to this value.
- constant charge current: The 1000 mA are taken from the downstream devicetree
of the serranove battery. It's not easy to spot. The value is in the line
"input_current_limit" [4]. The rows are according to the power supply type,
the 4th value stands for "main supply" [5]. That's the value used by the
Android driver when a charging cable is plugged into the device.
- charge termination current: In the downstream devicetree of the battery
that's the line "full_check_current_1st", which contains the 150 mA [6].
- precharge voltage: This one doesn't get set in the downstream Android driver.
The chip's default is 2.8 V. That seemed too low to have a notable effect of
handling the battery gentle. The chosen value of 3.5 V is a bit arbitrary
and possibly rather high. As the device is already several years old and
therefore most batteries too, a value on the safe side seems reasonable.
- constant charge voltage: The value of 4.35 V is set in the line
"chg_float_voltage" of the downstream battery devicetree [7].
The "connector" sub-node in the extcon node, the "battery" node in the
general section and the line "power-supplies" in the fuel-gauge node result
from the way of implementation documented in the dt-bindings of
rt5033-charger [8] and mfd rt5033 [9].
[1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/arch/arm/boot/dts/samsung/msm8916/msm8916-sec-serranovelte-eur-r03.dtsi#L135-L181
[2] https://github.com/torvalds/linux/blob/v6.3/include/linux/mfd/rt5033-private.h#L211-L212
[3] https://github.com/torvalds/linux/blob/v6.3/drivers/regulator/rt5033-regulator.c#L83
[4] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/arch/arm/boot/dts/samsung/msm8916/msm8916-sec-serranovelte-battery-r01.dtsi#L100
[5] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/include/linux/power_supply.h#L173-L177
[6] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/arch/arm/boot/dts/samsung/msm8916/msm8916-sec-serranovelte-battery-r01.dtsi#L102
[7] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/arch/arm/boot/dts/samsung/msm8916/msm8916-sec-serranovelte-battery-r01.dtsi#L95
[8] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml?h=next-
20230616
[9] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml?h=next-
20230616
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Link: https://lore.kernel.org/r/20230619203743.8136-1-jahau@rocketmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sun, 18 Jun 2023 11:44:42 +0000 (13:44 +0200)]
arm64: dts: qcom: sm8250-edo: correct ramoops pmsg-size
There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':
sm8250-sony-xperia-edo-pdx206.dtb: ramoops@
ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sun, 18 Jun 2023 11:44:41 +0000 (13:44 +0200)]
arm64: dts: qcom: sm8150-kumano: correct ramoops pmsg-size
There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':
sm8150-sony-xperia-kumano-griffin.dtb: ramoops@
ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sun, 18 Jun 2023 11:44:40 +0000 (13:44 +0200)]
arm64: dts: qcom: sm6350: correct ramoops pmsg-size
There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':
sm6350-sony-xperia-lena-pdx213.dtb: ramoops@
ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sun, 18 Jun 2023 11:44:39 +0000 (13:44 +0200)]
arm64: dts: qcom: sm6125-sprout: correct ramoops pmsg-size
There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':
sm6125-xiaomi-laurel-sprout.dtb: ramoops@
ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sun, 18 Jun 2023 11:44:38 +0000 (13:44 +0200)]
arm64: dts: qcom: sm6125-pdx201: correct ramoops pmsg-size
There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':
sm6125-sony-xperia-seine-pdx201.dtb: ramoops@
ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sun, 18 Jun 2023 11:44:37 +0000 (13:44 +0200)]
arm64: dts: qcom: sm8450-hdk: correct FSA4480 port
FSA4480 has only one port according to bindings:
sm8450-hdk.dtb: typec-mux@42: 'port' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sun, 18 Jun 2023 11:44:36 +0000 (13:44 +0200)]
arm64: dts: qcom: sm8350-hdk: correct FSA4480 port
FSA4480 has only one port according to bindings:
sm8350-hdk.dtb: typec-mux@42: 'port' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:41 +0000 (19:15 +0200)]
arm64: dts: qcom: sm6115-pro1x: fix incorrect gpio-key,wakeup
Use 'wakeup-source' instead of 'gpio-key,wakeup' to indicate key can
wake-up the device:
sm6115-fxtec-pro1x.dtb: gpio-keys: key-volume-up: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-15-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:40 +0000 (19:15 +0200)]
arm64: dts: qcom: sc8180x-flex-5g: align gpio-keys node name with bindings
Bindings except certain pattern for gpio-keys children:
sc8180x-lenovo-flex-5g.dtb: gpio-keys: 'lid' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-14-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:39 +0000 (19:15 +0200)]
arm64: dts: qcom: sc8180x-primus: correct panel ports
Panel takes only one port:
sc8180x-primus.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-13-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:38 +0000 (19:15 +0200)]
arm64: dts: qcom: sc8180x-flex-5g: correct panel ports
Panel takes only one port:
sc8180x-lenovo-flex-5g.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:37 +0000 (19:15 +0200)]
arm64: dts: qcom: sc8180x: align thermal node name with bindings
Bindings expect thermal node names to end with 'thermal':
sc8180x-lenovo-flex-5g.dtb: thermal-zones: 'gpu-thermal-bottom', 'gpu-thermal-top' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:36 +0000 (19:15 +0200)]
arm64: dts: qcom: sc8180x: use generic ADC channel node names
ADC channel node names were changed to require generic 'channel'. The
user-visible part is defined via label.
sc8180x-lenovo-flex-5g.dtb: adc@3100: 'die-temp@6', 'ref-gnd@0', 'vref-1p25@1' do not match any of the regexes: '^channel@[0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:34 +0000 (19:15 +0200)]
arm64: dts: qcom: sc7180-aspire1: use generic ADC channel node names
ADC channel node names were changed to require generic 'channel'. The
user-visible part is defined via label.
sc7180-acer-aspire1.dtb: adc@3100: 'charger-thermistor@4f', 'thermistor@4e' do not match any of the regexes: '^channel@[0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20230617171541.286957-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:33 +0000 (19:15 +0200)]
arm64: dts: qcom: msm8996-xiaomi: use generic node names
Use generic node names for I2C devices.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:32 +0000 (19:15 +0200)]
arm64: dts: qcom: msm8996-xiaomi: drop label from I2C
I2C controller bindings do not allow label property:
msm8996-xiaomi-gemini.dtb: i2c@75b6000: Unevaluated properties are not allowed ('label' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:31 +0000 (19:15 +0200)]
arm64: dts: qcom: msm8939: drop incorrect smp2p Hexagon properties
The children of qcom,smp2p do not need address/size-cells:
msm8939-sony-xperia-kanuti-tulip.dtb: smp2p-hexagon: slave-kernel: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:30 +0000 (19:15 +0200)]
arm64: dts: qcom: apq8096-db820c: drop label from I2C
I2C controller bindings do not allow label property:
apq8096-db820c.dtb: i2c@7577000: Unevaluated properties are not allowed ('label' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:29 +0000 (19:15 +0200)]
arm64: dts: qcom: apq8016-sbc: drop label from I2C and SPI
I2C and SPI controller bindings do not allow label property:
apq8016-sbc.dtb: spi@78b7000: Unevaluated properties are not allowed ('label' was unexpected)
apq8016-sbc.dtb: i2c@78b6000: Unevaluated properties are not allowed ('label' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617171541.286957-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:28 +0000 (19:15 +0200)]
arm64: dts: qcom: msm8916-l8150: correct light sensor VDDIO supply
liteon,ltr559 light sensor takes VDDIO, not VIO, supply:
msm8916-longcheer-l8150.dtb: light-sensor@23: 'vio-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes:
3016af34ef8d ("arm64: dts: qcom: msm8916-longcheer-l8150: Add light and proximity sensor")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20230617171541.286957-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 17:15:27 +0000 (19:15 +0200)]
arm64: dts: qcom: msm8916-gt5: drop incorrect accelerometer interrupt-names
st,lis2hh12 accelerometer binding does not allow interrupt-names:
msm8916-samsung-gt58.dtb: accelerometer@1d: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20230617171541.286957-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 11:21:15 +0000 (13:21 +0200)]
arm64: dts: qcom: sc8180x-flex-5g: remove superfluous "input-enable"
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
commit
c4a48b0df8bf ("dt-bindings: pinctrl: qcom: tlmm should use
output-disable, not input-enable") the property is not accepted anymore.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617112115.130024-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 11:21:14 +0000 (13:21 +0200)]
arm64: dts: qcom: apq8039-t2: remove superfluous "input-enable"
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
commit
c4a48b0df8bf ("dt-bindings: pinctrl: qcom: tlmm should use
output-disable, not input-enable") the property is not accepted anymore.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230617112115.130024-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Krzysztof Kozlowski [Fri, 16 Jun 2023 17:49:55 +0000 (19:49 +0200)]
arm64: dts: qcom: sm8450: correct crypto unit address
Crypto node unit address should match reg.
Fixes:
b92b0d2f7582 ("arm64: dts: qcom: sm8450: add crypto nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230616174955.1783652-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Thu, 15 Jun 2023 23:46:10 +0000 (01:46 +0200)]
arm64: dts: qcom: sc7180: Hook up BWMONs
Hook up 2 out of 4 (the rest are for NPU) BWMONs exposed on the SC7180.
This allows for scaling DDR and LLCC independently from cpufreq.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Nikita Travkin <nikita@trvn.ru> # Aspire 1
Link: https://lore.kernel.org/r/20230616-topic-sc7180_bwmons-v1-2-4ddb96f9a6cd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Vincent Guittot [Thu, 15 Jun 2023 15:48:52 +0000 (17:48 +0200)]
arm64: dts: qcom: sm8250: correct dynamic power coefficients
sm8250 faces the same problem with its Energy Model as sdm845. The energy
cost of LITTLE cores is reported to be higher than medium or big cores
EM computes the energy with formula:
energy = OPP's cost / maximum cpu capacity * utilization
On v6.4-rc6 we have:
max capacity of CPU0 = 284
capacity of CPU0's OPP(1612800 Hz) = 253
cost of CPU0's OPP(1612800 Hz) = 191704
max capacity of CPU4 = 871
capacity of CPU4's OPP(710400 Hz) = 255
cost of CPU4's OPP(710400 Hz) = 343217
Both OPPs have almost the same compute capacity but the estimated energy
per unit of utilization will be estimated to:
energy CPU0 = 191704 / 284 * 1 = 675
energy CPU4 = 343217 / 871 * 1 = 394
EM estimates that little CPU0 will consume 71% more than medium CPU4 for
the same compute capacity. According to [1], little consumes 25% less than
medium core for Coremark benchmark at those OPPs for the same duration.
Set the dynamic-power-coefficient of CPU0-3 to 105 to fix the energy model
for little CPUs.
[1] https://github.com/kdrag0n/freqbench/tree/master/results/sm8250/k30s
Fixes:
6aabed5526ee ("arm64: dts: qcom: sm8250: Add CPU capacities and energy model")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230615154852.130076-1-vincent.guittot@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Thu, 15 Jun 2023 08:34:22 +0000 (11:34 +0300)]
arm64: dts: qcom: msm8996: rename labels for HDMI nodes
In board files MDSS and HDMI nodes do not come next to each other,
because labels for HDMI nodes do not have the common mdss_ prefix.
Follow the DSI example and enable such grouping by changing the prefix
for HDMI labels to mdss_hdmi_*.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230615083422.350297-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dmitry Baryshkov [Thu, 15 Jun 2023 08:34:21 +0000 (11:34 +0300)]
Revert "arm64: dts: qcom: msm8996: rename labels for HDMI nodes"
The commit
f43b6dc7d56e ("arm64: dts: qcom: msm8996: rename labels for
HDMI nodes") is broken, it changes all the HDMI node names,
compatible strings instead of changing just node aliases. Revert the
commit in order to land a proper clean version.
Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes:
f43b6dc7d56e ("arm64: dts: qcom: msm8996: rename labels for HDMI nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230615083422.350297-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 14 Jun 2023 11:35:38 +0000 (13:35 +0200)]
arm64: dts: qcom: sm6350: Add DPU1 nodes
Add nodes required to enable MDSS/DPU1 on SM6350. There seem to be no
additional changes required to support the derivative SoCs, such as
SM7225.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-7-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 14 Jun 2023 11:35:37 +0000 (13:35 +0200)]
arm64: dts: qcom: sm6350: Fix ZAP region
The previous ZAP region definition was wrong. Fix it.
Note this is not a device-specific fixup, but a fixup to the generic
PIL load address.
Fixes:
5f82b9cda61e ("arm64: dts: qcom: Add SM6350 device tree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-6-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Konrad Dybcio [Wed, 14 Jun 2023 11:35:36 +0000 (13:35 +0200)]
arm64: dts: qcom: sm6350: Add GPU nodes
Add Adreno, GPU SMMU and GMU nodes to hook up everything that
the A619 needs to function properly.
Co-developed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-5-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>