Qianggui Song [Sun, 29 Sep 2019 10:55:08 +0000 (18:55 +0800)]
ir: cannot wakeup system when keep pressing power key [1/1]
PD#SWPL-14797
Problem:
In freeze mode, keep press power key won't wake up system.
Solution:
replace pm_wakup_event with pm_stay_awake
Verify:
tl1
Change-Id: I5b88714ff45034280ec1d638f86b51fa54e2a011
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Jiamin Ma [Mon, 30 Sep 2019 00:35:00 +0000 (08:35 +0800)]
page_trace: fix compile error [1/1]
PD#SWPL-14800
Problem:
Compile error
Solution:
Fix compile error
Verify:
Compile pass
Change-Id: Iffb95fef1572e4ce17ec80f0765920b8afad8513
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Xingyu Chen [Tue, 24 Sep 2019 05:15:15 +0000 (13:15 +0800)]
key: fix wakeup issues of gpiokey and adckey in freeze mode [1/1]
PD#SWPL-14597
Problem:
- it is risky to replace directly system_freezable_wq with system_wq
for input poll device.
- the system can't be awakened by gpiokey or adckey when system in
freeze mode.
Solution:
- because of the input poll-device can't compatible freeze mode, we
replace it with input device.
- perfect wakeup operation when system works in freeze mode.
Verify:
test pass on ac200
Change-Id: I81c867da7325480712aa5903289e02ebb20d6f07
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
nengwen.chen [Sun, 29 Sep 2019 03:03:43 +0000 (11:03 +0800)]
atv_demod: adds check exit status when scanning [2/2]
PD#TV-10574
Problem:
adds check exit status when scanning.
Solution:
1.adds check exit status when scanning.
Verify:
Verified by x301.
Change-Id: If7ab459a4554d5c0f70b3048956781ea015dbf2e
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Zongdong Jiao [Tue, 24 Sep 2019 13:42:35 +0000 (21:42 +0800)]
hdmitx: reduce the delay time of plugout [1/1]
PD#OTT-6369
Problem:
The HPD low time of some Monitor(such as LG) is about 30ms, less than 100ms
Solution:
Reduce the delay time of plugout
Verify:
G12A/U212
Change-Id: I343223b5ef0696da035f0b3b179bdbfbce68c859
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Zhizhong Zhang [Fri, 27 Sep 2019 09:22:01 +0000 (17:22 +0800)]
Audio: Intermittently sluggish video observed on few channels [3/3]
PD#OTT-5171
Problem:
Intermittently sluggish video observed on few channels
Solution:
Don't change pcr when setting apts in pcrmaster mode
Verify:
patch build of U212
Change-Id: I393c3ea8504b95c63edfd1b5acdb89f9ee754f25
Signed-off-by: Zhizhong Zhang <zhizhong.zhang@amlogic.com>
gerrit autosubmit [Sun, 29 Sep 2019 08:02:08 +0000 (01:02 -0700)]
Merge "slab: trace for each slab object [1/1]" into amlogic-4.9-dev
yao liu [Fri, 27 Sep 2019 09:56:44 +0000 (05:56 -0400)]
dv: osd icon display colored dots at 720p50hz [1/2]
PD#SWPL-14463
Problem:
dv vertical potch is small
Solution:
increase vpotch from 0x30 to 0x38
Verify:
verify on sm1 720p.
Change-Id: Iebf6708f62a8b8c2a32accf9ef721b4d12fa2370
Signed-off-by: yao liu <yao.liu@amlogic.com>
Evoke Zhang [Thu, 26 Sep 2019 08:31:21 +0000 (16:31 +0800)]
amvecm: add viu2 vsync support for gamma [1/1]
PD#SWPL-14450
Problem:
gamma can't support viu2 vsync
Solution:
add viu2 vsync support for gamma
Verify:
u202
Change-Id: I5f490b254f58a130451ff69a456c218e6e4dcc94
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Brian Zhu [Thu, 26 Sep 2019 18:01:46 +0000 (02:01 +0800)]
vpp: use the correct sr0 max width [1/1]
PD#SWPL-14306
Problem:
When sr0 v scaler is enabled or not, the sr0 max width
is incorrectly.
Solution:
Using the correct sr0 max width.
Verify:
Verified by u212
Change-Id: Id5e0b66f0878676536be0e0970fe8f26419b978c
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Bichao Zheng [Thu, 12 Sep 2019 07:17:46 +0000 (15:17 +0800)]
irblaster: meson: fix Coverity errors [1/2]
PD#SWPL-13973
Problem:
irblaster Coverity errors.
Solution:
1. Properly release resources.
2. Fix return value type.
Verify:
test pass on g12a_u200_v1
Change-Id: I50054ba3ac9f02aeeaa005b7823416b1c4c9a196
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
baocheng sun [Thu, 26 Sep 2019 07:41:42 +0000 (03:41 -0400)]
ion: ion_sync_for_device use swiotlb_dma_ops not dummy_dma_ops [1/1]
PD#OTT-5276
Problem:
CTS EncodeDecodeTest failed. Ion sync ioctrl was
forwarded to a dummy implementation. So cached dma buffer
syncing between device and driver was inconsistent occasionally.
Solution:
Changed the dummy_dma_ops to swiotbl_dma_ops when ion_sync_for_device
Verify:
franklin, hertz
Change-Id: I16863bba6c3fe16b9c3b2b410ade6e45c9e74826
Signed-off-by: baocheng sun <baocheng.sun@amlogic.com>
shuanglong.wang [Mon, 23 Sep 2019 08:37:08 +0000 (16:37 +0800)]
video: clear omx_pts_set_index when session switch [1/1]
PD#SWPL-13597
Problem:
av diff over 200ms after seek when test AL1 ep sync
Solution:
clear omx_pts_set_index when session switch that new playback, drop
old index, new index will update asap when set_omx_pts invoked.
Verify:
verify by skb nts
Change-Id: I5f46338d46524ceb9a4e907cf9db07ff2e373a08
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Jianxin Pan [Fri, 27 Sep 2019 11:48:59 +0000 (04:48 -0700)]
Merge "vad: enable tm2 vad wakeup [2/2]" into amlogic-4.9-dev
yao liu [Thu, 5 Sep 2019 11:12:38 +0000 (07:12 -0400)]
dv: dolby tv core need bitmatch [1/1]
PD#SWPL-6655
Problem:
tm2 tvcore not bitmatch
Solution:
1.Config VIU_VD1_FMT_CTRL for tm2
2.Config DIAG_CTRL, CRC_CTRL and CM_CRC reg for tm2
3.Config DOLBY_PATH_CTRL for tm2
Verify:
Verified on tm2
Change-Id: I56a086c498ed4d3bf2f43a4639c79546072d586b
Signed-off-by: yao liu <yao.liu@amlogic.com>
Brian Zhu [Wed, 11 Sep 2019 19:39:26 +0000 (03:39 +0800)]
vpp: improve the csc and dv switch flow and policy [1/1]
PD#SWPL-13990
Problem:
There are some conflicts between csc and dv module switching.
Can not switch to SDR->DV when HDR core is working on SDR->SDR mode.
Solution:
1. Improve the switching policy. DV and csc will use same on.
2. add mute operation under dv mode.
Verify:
Verified on AC211
Change-Id: I4d59328fc34228a0ef5275d22643932c4dfe00b0
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Bencheng Jing [Wed, 25 Sep 2019 08:52:39 +0000 (16:52 +0800)]
amvecm: add lc enable/disable in pc mode [1/1]
PD#SWPL-12580
Problem:
pcmode can not disable lc
Solution:
add lc enable/disable in pc mode
Verify:
verified by tl1
Change-Id: Ie8f7ff84549cd42efef550ecd7adf6d959ff5a4f
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Lei Yang [Tue, 24 Sep 2019 12:37:22 +0000 (20:37 +0800)]
hdmirx: add repeater22 [1/1]
PD#SWPL-12503
Problem:
TM2 cannot support repeater22
Solution:
add repreater2.2
Verify:
TM2
Change-Id: Idda626632641939dccab79bf3d958e8f2c462c82
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
yao liu [Thu, 26 Sep 2019 10:28:09 +0000 (06:28 -0400)]
dv: osd icon display colored dots at 720p [1/1]
PD#SWPL-14463
Problem:
OSD hold line changed from 4 to 8, dv vertical
potch should be adjusted accordingly.
Solution:
increase vpotch from 0x20 to 0x30.
Verify:
verify on sm1 720p.
Change-Id: I33779829cb80ce34c5596081a7591278e214d347
Signed-off-by: yao liu <yao.liu@amlogic.com>
yunhua.wei [Tue, 10 Sep 2019 03:32:16 +0000 (11:32 +0800)]
audio: change spdif input audio stuttering [1/1]
PD#SH-1182
Problem:
change spdif input audio stuttering
Solution:
Change the log level from pr_info to pr_debug
Verify:
A113D
Change-Id: I44eb6d4453dddff7a1e8e4e2345603aa292ba161
Signed-off-by: yunhua.wei <yunhua.wei@amlogic.com>
Xiaoming Sui [Sat, 21 Sep 2019 09:36:28 +0000 (17:36 +0800)]
avsync: tsync: fix avsync issues when dtv play [2/2]
PD#TV-10253
Problem:
PD#TV-10253, SWPL-12816
dtv play when pcr is invalid, avsync is lost sometimes.
Solution:
add some specific marginal checks.
Verify:
X301
Change-Id: I2115bc934cd87d8a93c77180f4f37f1d23fa23ba
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
yicheng shen [Wed, 25 Sep 2019 11:18:05 +0000 (07:18 -0400)]
hdmirx: fix hdcp2.2 request_mem_region fail issue [1/1]
PD#SWPL-14563
Problem:
hdcp_rx22 passed a wrong HPI address to hdmirx driver,
and cause HPI address request_mem_region fail
Solution:
Use the correct HPI address when request_mem_region called.
Verify:
TL1
Change-Id: I80bd6323ae4959edf3c792758568c581024536bb
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Jihong Sui [Wed, 25 Sep 2019 08:00:45 +0000 (16:00 +0800)]
deinterlace: pq: mtn use different setting for 480i [1/1]
PD#SWPL-14550
Problem:
deinterlance1-Chapter#1 in sony test pattern,
the "ok" display abnormal.
Solution:
from yanling(VLSI), bencheng.jing
change mxcmbY from 1 to 3;
add combing_bias_motion_setting and
combing_very_motion_setting for 480i;
Verify:
x301
Change-Id: Ida2b432af80a2bd5937f13b3f7a4a030b9b0cfaa
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Tao Zeng [Fri, 2 Aug 2019 08:32:22 +0000 (16:32 +0800)]
slab: trace for each slab object [1/1]
PD#TV-8287
Problem:
Slab memleak is hard to track;
Solution:
Add slab trace to fix it
Verify:
P212
Change-Id: Ie1c44f28d5539c7bf71f9825c617c36af65d8058
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
qi duan [Wed, 25 Sep 2019 07:31:39 +0000 (03:31 -0400)]
eth: compatible internal phy enet efuse map for some chip [1/1]
PD#SWPL-14596
Problem:
some g12a chip,efuse map for enet is diff
So need compatible for these chip
Solution:
read valid bit from valid block,not data block
Verify:
verified by tl1 and g12a
Change-Id: I564209d865cbc2ff1151df07d06593b12ea225d8
Signed-off-by: qi duan <qi.duan@amlogic.com>
changqing.gao [Wed, 18 Sep 2019 05:41:05 +0000 (13:41 +0800)]
iomap: fix coverity errors [1/1]
PD#SWPL-13972
Problem:
iomap Coverity errors.
Solution:
1. remove verbose code.
2. check return value.
Verify:
test pass on tm2_ab301_v1
Change-Id: Ib8c2baaae63d3c6454ffa45a0c353a6dd9de0787
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
Jihong Sui [Tue, 24 Sep 2019 02:39:41 +0000 (10:39 +0800)]
deinterlace: pq: fix combing_fix_en can not change [1/1]
PD#SWPL-11557
Problem:
Some scenes flicker badly, such as the roof
Solution:
The modification requirements come from,
yanling(VLSI), bencheng.jing
a. patch 62052:
need change mtn parameter back to old for local 1080i;
b. patch 71464:
need fix combing_fix_en can not change;
Verify:
x301
Change-Id: I3e067930f0e4dea9f300e888a6ee3f96caf987fb
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
robin zhu [Fri, 20 Sep 2019 04:03:07 +0000 (21:03 -0700)]
video: dv: DV SDK, DRM infoframe in GBR order [1/1]
PD#SWPL-13874
Problem:
DV sdk test, for sdr/hdr/dv to hdr cases
DRM infoframe primaries in GBR order
Solution:
DV enable, send primaries in RGB order
Verify:
None
Change-Id: I0229179592203aba5e2a388a572b0061fa21a48f
Signed-off-by: robin zhu <robin.zhu@amlogic.com>
Hang Cheng [Tue, 24 Sep 2019 06:12:27 +0000 (14:12 +0800)]
hdmitx: force to update glitch time after hdcp22 unmux [1/1]
PD#SWPL-11894
Problem:
glitch time in bl31 may not be updated after hdcp22 unmux,
because get hdcp auth result function in bl31 will not be
called after hdcp mode set to 0. In a result, the glitch
hdcp22 result may take place of the actual hdcp22 auth
status after mode change, and feedback to systemcontrol
to clear/set video mute by wrong
Solution:
force to update glitch time after hdcp22 unmux
Verify:
U200/g12a
Change-Id: I497ead5f8f5c46959560ffc0c8702acca1a3f46c
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
jinrong.liao [Mon, 23 Sep 2019 03:32:12 +0000 (11:32 +0800)]
dts: add county and langurage prop for gva [1/1]
PD#SH-875
Problem:
add county and langurage prop via unifykey for gva
Solution:
add county and langurage prop via unifykey for gva
Verify:
S420
Change-Id: Icf5f7c3f44d93fbcaf2be3410e0c04289549c555
Signed-off-by: jinrong.liao <jinrong.liao@amlogic.com>
Evoke Zhang [Wed, 18 Sep 2019 02:02:25 +0000 (10:02 +0800)]
tvafe: update 0x125 setting for tl1 av ntsc-m/pali [1/1]
PD#SWPL-14271
Problem:
av pali green block dark in colorbar left bottom corner
Solution:
update 0x125 setting for tl1 av ntsc-m/pali
Verify:
x301
Change-Id: Icb759a39c1265ac043b888b55f3ccaf12661cafe
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Qiufang Dai [Tue, 24 Sep 2019 13:59:47 +0000 (21:59 +0800)]
freeze: add IRQF_NO_SUSPEND for ir irq flag for avoid wakeup by any IR key
PD#TV-10438
Problem:
system can be wake up by any IR key
Solution:
Add IRQF_NO_SUSPEND to avoid IR interrupt being seen as wakeup source IRQ
When IR irq check current key is power key, then send pm_wakeup_event()
Verify:
X32A0-T972
Change-Id: I753fe15f859480954bb569f2da3d3e0dd93c29e3
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Tao Zeng [Wed, 18 Sep 2019 06:19:27 +0000 (14:19 +0800)]
ramdump: not set sticky register if ramdump disabled [1/1]
PD#TV-1924
Problem:
Sticky register which control compress in bl2z will always be set
if ramdump driver probed.
Solution:
If ramdump is disabled by envrioment under uboot. sticky register
should not set for not enter compress under bl2z
Verify:
x301
Change-Id: I1f41c98cebf7957f0dc214046e6d011e08c326de
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
shaochan.liu [Wed, 11 Sep 2019 06:03:03 +0000 (14:03 +0800)]
lcd: add lcd_init_level to control lcd display [2/2]
PD#TV-9856
Problem:
need change display driver for cool boot to enter
kernel stage freeze mode
Solution:
add lcd_panel_ctrl to control lcd display
Verify:
t962x2-x301
Change-Id: I8b58ab0a0f87c49791af7dddf7b05db37f7ad716
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Cao Jian [Thu, 19 Sep 2019 03:38:57 +0000 (11:38 +0800)]
picdec: fix no scale mode, frame stretch [1/1]
PD#SWPL-14477
Problem:
the picture is rotated 90 degrees,
stretching left and right
Solution:
modify conditions for frame width or height
equal to screen width or height
Verify:
verify by g12b-w400
Change-Id: I0ca9cc255b202306562bee69726400c697f3b053
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
he.he [Thu, 29 Aug 2019 11:09:28 +0000 (07:09 -0400)]
usb: xHCI host not responding to stop endpoint command [1/1]
PD#SWPL-14053
Problem:
Read and write simultaneously on two disks on a hub,
and then the XHCI controller would halted.
Solution:
Set the GUCTL1 BIT 17 to 1 for disable park mode.
Verify:
test pass on u200, ODROID-N2
Change-Id: I007804fa6b97a103da4a05be12c1193b9dd422cb
Signed-off-by: he.he <he.he@amlogic.com>
Xingyu Chen [Thu, 12 Sep 2019 03:04:08 +0000 (11:04 +0800)]
iio: adc: coverity defect cleanup [1/1]
PD#SWPL-13967
Problem:
unchecked return value of regmap_write
Solution:
to check the return value
Verify:
test pass on g12a
Change-Id: Ibb45e36d7c24f0e0ea8b14da75e887321ee5b791
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Jihong Sui [Fri, 20 Sep 2019 08:03:44 +0000 (16:03 +0800)]
deinterlace: fix suspend di cause undefined instruction [1/1]
PD#SWPL-14418
Problem:
DI issue causes platform crash to restart
when do DTV 2s channel switch+15s suspend
Solution:
use active_flg to protect tasklet_schedule
Verify:
tl1
Change-Id: I91028a039d8b1799b131a953bef4877f70a2f697
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Rui Wang [Thu, 19 Sep 2019 02:33:53 +0000 (10:33 +0800)]
video: fix video axis no changes when enable hold video [1/1]
PD#TV-10251
Problem:
PE190005-1038 press the OK button switching to
the ATV channel, the screen is not full screen.
Solution:
After the video property changes, if the hold video
is enabled, the current frame needs to be refreshed.
Verify:
Verified with X301
Change-Id: I05cb7255147b1950cb6b9d5813148a9ce0aa6e66
Signed-off-by: Rui Wang <rui.wang@amlogic.com>
yao liu [Tue, 17 Sep 2019 10:39:24 +0000 (06:39 -0400)]
dv: display abnormal when seeking [1/1]
PD#SWPL-13834
Problem:
Dropping dv frame triggers parser_matedata which updates
the new_dovi_setting. Before rendering the first frame,
keep frame is displayed. However, keep frame requires
toggle, which updates the dovi_setting from new_dovi_setting,
causing color error in keep frame
Solution:
Dropping frame don't update new_dovi_setting
Verify:
passed on sm1
Change-Id: I1c73ba6f7d192066e3d5f9439ccbedc6d610d6eb
Signed-off-by: yao liu <yao.liu@amlogic.com>
Bencheng Jing [Thu, 19 Sep 2019 05:58:28 +0000 (13:58 +0800)]
amvecm: fix pure black scene adjust contrast affected brightness [1/1]
PD#SWPL-14319
Problem:
adjust the contrast in full range
Solution:
change to limit range
Verify:
verified by tl1
Change-Id: Icfa3c128c2943e30f2710dad5181c1d85dd32095
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
nengwen.chen [Fri, 20 Sep 2019 05:49:44 +0000 (13:49 +0800)]
atv_demod: fix first sound carrier output in nicam system [1/1]
PD#TV-9972
Problem:
first sound carrier no output in nicam system.
Solution:
1.fix first sound carrier output in nicam system.
Verify:
Verified by TL1.
Change-Id: Ib89b6a5300a1ebeb9e61bbb3acb6356e2abab08f
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Jihong Sui [Mon, 16 Sep 2019 11:35:32 +0000 (19:35 +0800)]
deinterlace: vpp: change mc update flow [1/1]
PD#SWPL-14142
Problem:
display abnormal after play 1 hour.
this is because rdma can't been called in two thread.
mc update bit in hw timer, this causes pps's register
to be set incorrectly.
Solution:
call mc update function in video.c
Verify:
txlx
Change-Id: I750aa5c242a1077691f82c3b2361ee46b3202313
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jihong Sui [Mon, 16 Sep 2019 03:20:43 +0000 (11:20 +0800)]
deinterlace: optimize reset/light unreg flow [1/1]
PD#SWPL-14059
Problem:
video stuck after reset or light unreg.
Solution:
optimize reset/light unreg flow
Verify:
G12A
Change-Id: I982ef4ee618a25d0b562f70b5e7df0fad2d87278
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jihong Sui [Tue, 17 Sep 2019 11:50:40 +0000 (19:50 +0800)]
deinterlace: delete reg_req_flag_irq to avoid failed reg. [1/1]
PD#SWPL-14260
Problem:
variable reg_req_flag_irq is redundant and
it has a probability of causing error reg.
Solution:
delete this variable.
Verify:
tl1
Change-Id: I807f32789acdf4b8e0fea88f9786a301638460ff
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
yao liu [Fri, 20 Sep 2019 01:56:22 +0000 (21:56 -0400)]
dv: display green when hotplug hdmi after boot [1/1]
PD#SWPL-14323
Problem:
Kernel and uboot is not sync: When kernel startup
without hdmi,dolby_vision_on is not set to true
even if dv is on in uboot. This lead to dv core
can't turn off when bypass dv in sdr->sdr case.
Solution:
Regardless of connecting to hdmi, as long as uboot
turn on dv, set dolby_vision_on up
Verify:
verify on sm1
Change-Id: I704c833c0b099637ea08b255b6cd380199ea0148
Signed-off-by: yao liu <yao.liu@amlogic.com>
Tao Zeng [Tue, 17 Sep 2019 07:00:12 +0000 (15:00 +0800)]
vmap: fix wrong mmu setting in check sp funciton [1/1]
PD#TV-9668
Problem:
If sp address is in linear mapping range, check_sp_fault_again
function in vmap fault handler will still map a new page for it.
This will cause some data in R/W section polluted.
Solution:
Avoid map page if sp is in linear range.
Verify:
TL1 x301
Change-Id: I0e02a2048b586854c528cd3eeafb725751b9dc82
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Tao Zeng [Thu, 12 Sep 2019 08:46:06 +0000 (16:46 +0800)]
event: restore watch point after cpu pm event [1/1]
PD#TV-9668
Problem:
After cpu idle enabled, watch point event register will be cleared
if cpu exit pm(idle). This will cause watch point can't work.
Solution:
re-enable watch point after cpu exit pm(idle)
Verify:
TL1
Change-Id: I4fc2002eaabecd4c5e60a5916bc29e0107882bec
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Xing Wang [Thu, 19 Sep 2019 06:29:58 +0000 (14:29 +0800)]
audio: auge: fix kcontrol chip info [1/1]
PD#SWPL-14331
Problem:
mixer "HDMI ARC Source" crashes when bootup
Solution:
fix kcontrol chip info
Verify:
x301
Change-Id: I2f2d66acbbd4092a5cbbe4c108d5ae928f0f0ccc
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Cao Jian [Tue, 17 Sep 2019 08:52:36 +0000 (16:52 +0800)]
osd: modify VPP_OSD_SC_DUMMY_DATA alpha conditions [1/1]
PD#SWPL-14256
Problem:
When ATV Mode has no signal
the bright line interference at the bottom
if freescale height is set to vinfo height
Solution:
modify VPP_OSD_SC_DUMMY_DATA alpha value
Verify:
verified on txlx-r311
Change-Id: I48bbb1be533a88e8b3c622550a0a2e8c07f2a863
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
nengwen.chen [Wed, 18 Sep 2019 05:11:57 +0000 (13:11 +0800)]
atv_demod: remove 44.25 repeat try signal [1/1]
PD#TV-10334
Problem:
1.remove 44.25MHz repeat try signal.
Solution:
1.remove 44.25MHz repeat try signal.
Verify:
Verified by x301
Change-Id: I76608f76885f555dfa5849e8e9016757736c2de8
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Xihai Zhu [Thu, 19 Sep 2019 02:04:02 +0000 (22:04 -0400)]
amvecm: add addr protect for register program [1/1]
PD#SWPL-14333
Problem:
invalid address is allowed for register program
which cause kernel panic
Solution:
add protection, programming on invalid addr will
be terminated
Verify:
tl1
Change-Id: I44bedec256ee5c386b53188fb2d8e40ae8c3f553
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Qianggui Song [Wed, 11 Sep 2019 09:22:50 +0000 (17:22 +0800)]
ir: fix coverity unchecked return value issue [1/1]
PD#SWPL-13969
Problem:
In sysfs.c, return value of class_register is not checked.
Solution:
check return value of class_register
Verify:
local coverity check
Change-Id: If8deb3e388e784650e4812257143c3ac919c2d9a
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Xing Wang [Fri, 9 Aug 2019 07:30:08 +0000 (15:30 +0800)]
audio: auge: add eARC_TX/ARC_TX driver for tm2 [1/1]
PD#SWPL-12654
Problem:
eARCTX/ARCTX function for tm2
Solution:
add eARCTX/ARCTX driver for tm2
add extcon for earc tx connection
optimize eARC RX with regmap
Verify:
ab311
Change-Id: I61f44950af9e200f698372ad4f17457785a6255a
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Xing Wang [Thu, 16 May 2019 13:43:26 +0000 (21:43 +0800)]
audio: update eARC_RX/ARC_RX driver [1/1]
PD#SWPL-6863
Problem:
eARCRX/ARCRX function for sm1/tm2
Solution:
add eARCRX/ARCRX driver for sm1/tm2
plug in/out HDMI cable, notify user space current attended type
Verify:
tested on ac200, ab311
Change-Id: I0332723ef9c9d45f7797df38a7077561fddb13bf
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Wenfeng Guo [Tue, 17 Sep 2019 09:12:27 +0000 (17:12 +0800)]
deinterlace: fix bright edge at the top when beans falling [1/1]
PD#SWPL-8980
Problem:
bright edge at the top when beans falling
Solution:
revert the setting of top two lines do weave to Feijun's suggestions
Verify:
TL1
Change-Id: I314e0d23e4e7c00939bd0203cd821144274fbf9e
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
Jihong Sui [Tue, 17 Sep 2019 05:48:14 +0000 (13:48 +0800)]
deinterlace: fix blend setting err [1/1]
PD#SWPL-8980
Problem:
0x170d[16] can't set;
Solution:
Correct logic errors according to Feijun's suggestions
Verify:
TL1
Change-Id: If1ba9494d49b5614aac7571c3ee0e6ddb3fb6245
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Todd Kjos [Wed, 24 Apr 2019 19:31:18 +0000 (12:31 -0700)]
RAVENPLAT 2652: RAVEN - Android Security Bulletin - September 2019-09 - Kernel components binder driver - CVE-2019-2181 [1/]
PD#OTT-5999
[Problem]
In binder_transaction of binder.c, there is a possible out of bounds
write due to an integer overflow. This could lead to local escalation of
privilege with noadditional execution privileges needed. User interaction
is needed for exploitation.
The fix is designed to check for the integer overflow.
[Solution]
UPSTREAM: binder: check for overflow when alloc for security context
commit
0b0509508beff65c1d50541861bc0d4973487dc5 upstream.
When allocating space in the target buffer for the security context,
make sure the extra_buffers_size doesn't overflow. This can only
happen if the given size is invalid, but an overflow can turn it
into a valid size. Fail the transaction if an overflow is detected.
Bug:
130571081
Change-Id: Ibaec652d2073491cc426a4a24004a848348316bf
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Mathias Payer [Wed, 5 Dec 2018 20:19:59 +0000 (21:19 +0100)]
RAVENPLAT 2390:OSS vulnerability found in [boot.img]:[linux_kernel] (CVE-2018-20169) Risk:[] [1/1]
PD#OTT-5679
[Problem]
[Solution]
USB: check usb_get_extra_descriptor for proper size
When reading an extra descriptor, we need to properly check the minimum
and maximum size allowed, to prevent from invalid data being sent by a
device.
Change-Id: Ie3dbdb24bebc0f2813b0bedd2261f8246ddd71d3
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Hanjie Lin [Wed, 21 Aug 2019 01:19:19 +0000 (09:19 +0800)]
RAVENPLAT 2387:OSS vulnerability found in [boot.img]:[linux_kernel] (CVE-2018-17182) Risk:[] [1/1]
PD#OTT-5676
[Problem]
digital security team requires OSS to be patched up to the latest or non-vulnerable version
[Solution]
mm: get rid of vmacache_flush_all() entirely
Jann Horn points out that the vmacache_flush_all() function is not only
potentially expensive, it's buggy too. It also happens to be entirely
unnecessary, because the sequence number overflow case can be avoided by
simply making the sequence number be 64-bit. That doesn't even grow the
data structures in question, because the other adjacent fields are
already 64-bit.
So simplify the whole thing by just making the sequence number overflow
case go away entirely, which gets rid of all the complications and makes
the code faster too. Win-win.
[Test]
Change-Id: I536c7b183ced970e18c9d67211f32da0ee404111
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Hanjie Lin [Wed, 14 Aug 2019 10:42:54 +0000 (18:42 +0800)]
RAVENPLAT 2381:OSS vulnerability found in [boot.img]:[linux_kernel] (CVE-2018-6555) Risk:[] [1/1]
PD#OTT-5671
[Problem]
The irda_setsockopt function in net/irda/af_irda.c and later in
drivers/staging/irda/net/af_irda.c in the Linux kernel before 4.17
allows local users to cause a denial of service (ias_object
use-after-free and system crash) or possibly have unspecified other
impact via an AF_IRDA socket.
[Solution]
The irda_setsockopt() function conditionally allocates memory for a new
self->ias_object or, in some cases, reuses the existing
self->ias_object. Existing objects were incorrectly reinserted into the
LM_IAS database which corrupted the doubly linked list used for the
hashbin implementation of the LM_IAS database. When combined with a
memory leak in irda_bind(), this issue could be leveraged to create a
use-after-free vulnerability in the hashbin list. This patch fixes the
issue by only inserting newly allocated objects into the database.
[Test]
Change-Id: Idbdc870be0064e331969b39a7b6e447c16a9073a
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Hanjie Lin [Wed, 14 Aug 2019 08:36:56 +0000 (16:36 +0800)]
RAVENPLAT 2378:OSS vulnerability found in [boot.img]:[linux_kernel] (CVE-2018-9517) Risk:[] [1/1]
PD#OTT-5666
[Problem]
In pppol2tp_connect, there is possible memory corruption due to a
use after free. This could lead to local escalation of privilege with
System execution privileges needed. User interaction is not needed for
exploitation.
[Solution]
l2tp: pass tunnel pointer to ->session_create()
Using l2tp_tunnel_find() in pppol2tp_session_create() and
l2tp_eth_create() is racy, because no reference is held on the
returned session. These functions are only used to implement the
->session_create callback which is run by l2tp_nl_cmd_session_create().
Therefore searching for the parent tunnel isn't necessary because
l2tp_nl_cmd_session_create() already has a pointer to it and holds a
reference.
This patch modifies ->session_create()'s prototype to directly pass the
the parent tunnel as parameter, thus avoiding searching for it in
pppol2tp_session_create() and l2tp_eth_create().
Since we have to touch the ->session_create() call in
l2tp_nl_cmd_session_create(), let's also remove the useless conditional:
we know that ->session_create isn't NULL at this point because it's
already been checked earlier in this same function.
Finally, one might be tempted to think that the removed
l2tp_tunnel_find() calls were harmless because they would return the
same tunnel as the one held by l2tp_nl_cmd_session_create() anyway.
But that tunnel might be removed and a new one created with same tunnel
Id before the l2tp_tunnel_find() call. In this case l2tp_tunnel_find()
would return the new tunnel which wouldn't be protected by the
reference held by l2tp_nl_cmd_session_create().
Change-Id: I50e19ae5abb4009205e59105222bf92e3587f9c4
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Hanjie Lin [Mon, 12 Aug 2019 11:35:42 +0000 (19:35 +0800)]
RAVENPLAT-2379:OSS vulnerability found in [boot.img]:[linux_kernel] (CVE-2018-5390) Risk:[] [1/1]
PD#OTT-5669
[Problem]
Linux kernel versions 4.9+ can be forced to make very expensive calls
to tcp_collapse_ofo_queue() and tcp_prune_ofo_queue() for every incoming
packet which can lead to a denial of service.
[Solution]
Juha-Matti Tilli reported that malicious peers could inject tiny
packets in out_of_order_queue, forcing very expensive calls
to tcp_collapse_ofo_queue() and tcp_prune_ofo_queue() for
every incoming packet.
With tcp_rmem[2] default of 6MB, the ooo queue could
contain ~7000 nodes.
This patch series makes sure we cut cpu cycles enough to
render the attack not critical.
We might in the future go further, like disconnecting
or black-holing proven malicious flows.
[Test]
Change-Id: I09c72cd11a38516f3b6e293deb21c5dd0faa3d9e
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Rico Yang [Wed, 11 Sep 2019 07:40:17 +0000 (03:40 -0400)]
amvideo: omx consecutive drop should happen only after omx_run is true [1/1]
PD#SWPL-13232
Problem:
amvideo drops excessive video frames than it should drop
Solution:
drop only after omx_run is true
Verify:
verified on Franklin
Change-Id: Iacb8f23c9635d00ce6265a0228c1e1e458902c6a
Signed-off-by: Rico Yang <wei.yang@amlogic.com>
Hanjie Lin [Tue, 27 Aug 2019 08:21:46 +0000 (16:21 +0800)]
perf: pmu fine-tune for aarch32/64 of A53/A55/A73 [1/1]
PD#SWPL-13243
Problem:
pmu event is not accurate or not complete in A53/A55/A73.
Solution:
1, modify event config for A53/A55/A73.
2, perf executable file must compiled from latest kernel(5.1+)
3, A55 events are most complete, A73 are least complete(eg: less ld_retired/st_retired/stall/prefetch events)
4, A55/A53 same event meanings simlar, but A73 is more different(eg: L1/L2 dcache/icache loads meanings)
sample commands:
a55 arm64:
perf stat -e task-clock,context-switches,cpu-migrations,page-faults,instructions,armv8_pmuv3/ld_retired/,armv8_pmuv3/st_retired/,cycles,branch-loads,branch-load-misses,armv8_pmuv3/a55_l1d_cache_rd/,armv8_pmuv3/a55_l1d_cache_refill_rd/,armv8_pmuv3/a55_l1d_cache_wr/,armv8_pmuv3/a55_l1d_cache_refill_wr/,L1-icache-loads,L1-icache-load-misses,armv8_pmuv3/a55_l2d_cache_rd/,armv8_pmuv3/a55_l2d_cache_refill_rd/,armv8_pmuv3/a55_l1d_cache_refill_inner/,armv8_pmuv3/a55_l1d_cache_refill_outer/,armv8_pmuv3/a55_l1d_cache_refill_prefetch/,armv8_pmuv3/a55_l2d_cache_refill_prefetch/,armv8_pmuv3/a5x_stall_frontend_cache/,armv8_pmuv3/a5x_stall_frontend_tlb/,armv8_pmuv3/a5x_stall_backend_ld/,armv8_pmuv3/a55_stall_backend_ld_cache/,armv8_pmuv3/a55_stall_backend_ld_tlb/,armv8_pmuv3/a5x_stall_backend_st/,armv8_pmuv3/a5x_stall_backend_ilock_agu/,armv8_pmuv3/a5x_stall_backend_ilock_fpu/ ls
a53 arm64:
perf stat -e task-clock,context-switches,cpu-migrations,page-faults,instructions,armv8_pmuv3/ld_retired/,armv8_pmuv3/st_retired/,cycles,branch-loads,branch-load-misses,armv8_pmuv3/l1d_cache/,armv8_pmuv3/l1d_cache_refill/,L1-icache-loads,L1-icache-load-misses,armv8_pmuv3/a5x_l2d_cache/,armv8_pmuv3/a5x_l2d_cache_refill/,armv8_pmuv3/a53_cache_refill_prefetch/,armv8_pmuv3/a53_scu_snooped/,armv8_pmuv3/a5x_stall_frontend_cache/,armv8_pmuv3/a5x_stall_frontend_tlb/,armv8_pmuv3/a5x_stall_backend_ld/,,armv8_pmuv3/a5x_stall_backend_st/,armv8_pmuv3/a5x_stall_backend_ilock_agu/,armv8_pmuv3/a5x_stall_backend_ilock_fpu/ ls
a73 arm64: (w400 bind to a73 cpu2)
perf stat -e task-clock,context-switches,cpu-migrations,page-faults,instructions,cycles,branch-loads,branch-load-misses,armv8_pmuv3/l1d_cache/,armv8_pmuv3/l1d_cache_refill/,armv8_pmuv3/a55_l1d_cache_rd/,armv8_pmuv3/a55_l1d_cache_wr/,armv8_pmuv3/a5x_l2d_cache/,armv8_pmuv3/a5x_l2d_cache_refill/,armv8_pmuv3/a55_l2d_cache_rd/,armv8_pmuv3/a55_l2d_cache_wr/ busybox taskset 4 ls
a55 arm:
perf stat -e task-clock,context-switches,cpu-migrations,page-faults,instructions,armv7_cortex_a15/ld_retired/,armv7_cortex_a15/st_retired/,cycles,branch-loads,branch-load-misses,armv7_cortex_a15/a55_l1d_cache_rd/,armv7_cortex_a15/a55_l1d_cache_refill_rd/,armv7_cortex_a15/a55_l1d_cache_wr/,armv7_cortex_a15/a55_l1d_cache_refill_wr/,L1-icache-loads,L1-icache-load-misses,armv7_cortex_a15/a55_l2d_cache_rd/,armv7_cortex_a15/a55_l2d_cache_refill_rd/,armv7_cortex_a15/a55_l1d_cache_refill_inner/,armv7_cortex_a15/a55_l1d_cache_refill_outer/,armv7_cortex_a15/a55_l1d_cache_refill_prefetch/,armv7_cortex_a15/a55_l2d_cache_refill_prefetch/,armv7_cortex_a15/a5x_stall_frontend_cache/,armv7_cortex_a15/a5x_stall_frontend_tlb/,armv7_cortex_a15/a5x_stall_backend_ld/,armv7_cortex_a15/a55_stall_backend_ld_cache/,armv7_cortex_a15/a55_stall_backend_ld_tlb/,armv7_cortex_a15/a5x_stall_backend_st/,armv7_cortex_a15/a5x_stall_backend_ilock_agu/,armv7_cortex_a15/a5x_stall_backend_ilock_fpu/ ls
a53 arm:
perf stat -e task-clock,context-switches,cpu-migrations,page-faults,instructions,armv7_cortex_a15/ld_retired/,armv7_cortex_a15/st_retired/,cycles,branch-loads,branch-load-misses,armv7_cortex_a15/l1d_cache/,armv7_cortex_a15/l1d_cache_refill/,L1-icache-loads,L1-icache-load-misses,armv7_cortex_a15/a5x_l2d_cache/,armv7_cortex_a15/a5x_l2d_cache_refill/,armv7_cortex_a15/a53_cache_refill_prefetch/,armv7_cortex_a15/a53_scu_snooped/,armv7_cortex_a15/a5x_stall_frontend_cache/,armv7_cortex_a15/a5x_stall_frontend_tlb/,armv7_cortex_a15/a5x_stall_backend_ld/,armv7_cortex_a15/a5x_stall_backend_st/,armv7_cortex_a15/a5x_stall_backend_ilock_agu/,armv7_cortex_a15/a5x_stall_backend_ilock_fpu/ ls
a73 arm: (w400 bind to a73 cpu2)
perf stat -e task-clock,context-switches,cpu-migrations,page-faults,instructions,cycles,branch-loads,branch-load-misses,armv7_cortex_a15/l1d_cache/,armv7_cortex_a15/l1d_cache_refill/,armv7_cortex_a15/a55_l1d_cache_rd/,armv7_cortex_a15/a55_l1d_cache_wr/,armv7_cortex_a15/a5x_l2d_cache/,armv7_cortex_a15/a5x_l2d_cache_refill/,armv7_cortex_a15/a55_l2d_cache_rd/,armv7_cortex_a15/a55_l2d_cache_wr/ busybox taskset 4 ls
Verify:
ac200/u200/w400
Change-Id: I7f11e1480c3c27d016b011d2a84c33e824f69b08
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
nengwen.chen [Thu, 29 Aug 2019 09:20:55 +0000 (17:20 +0800)]
atv_demod: optimize pal-i ring [1/1]
PD#TV-8006
Problem:
1.optimize pal-i ring.
Solution:
1.optimize pal-i ring.
2.add pal-i peak filter.
Verify:
Verified by x301.
Change-Id: Id935a24712216aafc20ac150c2560dd998a76f56
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Yong Qin [Mon, 16 Sep 2019 08:30:42 +0000 (16:30 +0800)]
vlock: log level less than 3, enc mode not work properly [1/1]
PD#TV-10211
Problem:
log level less than 3, the function call flow changed, and
enc mode vlock max line, max pixel varible havn't be initialed.
Solution:
move initial max line/pixel varible in vlock initial function.
Verify:
tl1
Change-Id: Ib36662045e28a911bf1585bf57bc849b1952d6f9
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
wenbiao zhang [Tue, 30 Jul 2019 08:11:44 +0000 (16:11 +0800)]
vad: enable tm2 vad wakeup [2/2]
PD#SWPL-7124
Problem:
enable tm2 vad wakeup
Solution:
enable tm2 vad wakeup
Verify:
dalton, ab301
Change-Id: If7180618125e9edf8f3374fa5d5c2465178df74e
Signed-off-by: wenbiao zhang <wenbiao.zhang@amlogic.com>
Hong Guo [Thu, 20 Dec 2018 07:24:23 +0000 (15:24 +0800)]
CPUFREQ: use gp1 pll for cpufreq. [1/1]
PD#SWPL-3826
Problem:
use gp1 pll for cpufreq.
Solution:
use gp1 pll for cpufreq.
Verify:
x301_tl1
Change-Id: Iefb6d31ec40ba304f41024e4b7adceec881d043e
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
he.he [Tue, 10 Sep 2019 02:48:17 +0000 (22:48 -0400)]
usb: TOSHIBA Disk Can't Be Recognized on the Port of USB 2.0 [1/1]
PD#SWPL-14156
Problem:
TOSHIBA Disk can't be recognized on the Port of USB 2.0 and since then
any disk can't be recognized.This is because
that the CCS flag of the PORTSC is still set and if write 0
to 0x38 of usb phy register the CCS will change to
0 and so that other disks can be recognized.
Solution:
when the enumeration fails, call set_usb_phy_host_tuning.
Verify:
test pass on u212
Change-Id: I507f269afc825de75c7dcce5f79c9c1dd7793d84
Signed-off-by: he.he <he.he@amlogic.com>
zhiqiang liang [Fri, 10 May 2019 05:34:49 +0000 (13:34 +0800)]
power: optimize the power consumption of vad wakeup [1/1]
PD#SWPL-3826
Problem:
optimize the power consumption of tl1 with vad wakeup
Solution:
optimize the power consumption when enter freeze mode
switch the clk81 to 24M
cpu and dsu clk switch to gp1 pll,frequency is 600M
closed the fixed pll
closed the vddio_3.3V
Verify:
TL1 revB
Change-Id: I39170bb8efb91b126b6a15faad3cefee19b13089
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Jian Hu [Wed, 11 Sep 2019 06:05:35 +0000 (14:05 +0800)]
clk: add protection mechanism for all plls [1/1]
PD#SWPL-14024
Problem:
add protection mechanism for all plls
Solution:
add protection mechanism for all plls
Verify:
test passed on
1)axg
2)g12a
3)txl
4)txlx
Change-Id: I6f29026422f73c690854d5ffa292857d14922d22
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
yao liu [Mon, 16 Sep 2019 08:00:45 +0000 (04:00 -0400)]
dv: display green when playing sdr video on sdr tv [1/1]
PD#SWPL-14115
Problem:
DV is bypass for SDR->SDR case on sm1, but
bypass failed due to dolby_vision_status is
not sync with uboot.
Solution:
Update dolby_vision_status after startup.
Verify:
passed on sm1
Change-Id: I8025b0982ce5bfb2afc5ece1b5f14be54f3a80d6
Signed-off-by: yao liu <yao.liu@amlogic.com>
Zhongfu Luo [Mon, 9 Sep 2019 03:29:32 +0000 (11:29 +0800)]
defendkey: AXG: support secure upgrade check [3/3]
PD#SH-1185
Problem:
AXG need to support secure upgrade check
Solution:
1.add defendkey support in AXG dts
2.add defendkey config in smarthome defconfig
Verify:
AXG skt board verify pass
Change-Id: I1d173d4e7ce8d47c486bf8df4f6b7e417809c424
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
xianjun.liu [Mon, 16 Sep 2019 07:56:11 +0000 (15:56 +0800)]
MTD: Coverity defect cleanup: MTD [1/1]
PD#SWPL-13991
Problem:
Out-of-bounds read in get_free_node
Solution:
fix the issue
Verify:
AXG400
Change-Id: I6e41caf3b3118d524218d6023fb51df692865cba
Signed-off-by: xianjun.liu <xianjun.liu@amlogic.com>
qi duan [Mon, 16 Sep 2019 06:45:48 +0000 (02:45 -0400)]
eth: clk invert bit compatible for 100M when exphy [1/1]
PD#SWPL-14033
Problem:
if clk invert bit set, 100M will not connect
Solution:
don't invert clk when connect 100M network
Verify:
w400
Change-Id: I4c3acbcc0d05fc2c99b5a982461ab3d5ff83fe26
Signed-off-by: qi duan <qi.duan@amlogic.com>
qi duan [Wed, 4 Sep 2019 09:34:59 +0000 (05:34 -0400)]
ETH: add eth reset bit when resume. [1/1]
PD#SWPL-12602
Problem:
omni phy can not connect network probably
after long stress suspend test
for gxl/txl/txlx
Solution:
In suspend/resume sequeue, add eth reset
Verify:
verify on p212/r311
Change-Id: I4b6ab34eb2eae40533f4a33db8fb40a00f5b3d51
Signed-off-by: qi duan <qi.duan@amlogic.com>
jian.zhou [Wed, 11 Sep 2019 07:59:12 +0000 (03:59 -0400)]
audio: VAD use HIFI PLL [1/1]
PD#SWPL-12746
Problem:
VAD does not use HIFI PLL, it will effect vad wakup
Solution:
VAD use HIFI PLL
Verify:
T962X2_X301
Change-Id: Iad13661c4ec3495130f485447f3c8b034bee9ce2
Signed-off-by: jian.zhou <jian.zhou@amlogic.com>
Yue Wang [Thu, 12 Sep 2019 05:39:48 +0000 (13:39 +0800)]
usb: coverity fix [1/1]
PD#SWPL-14009
Problem:
Coverity defect cleanup - usb.
Solution:
Coverity defect cleanup - usb.
Verify:
sm1
Change-Id: Ib194a82e54f819e4ab59eab944b446683c894f15
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Nan Li [Mon, 9 Sep 2019 10:09:08 +0000 (18:09 +0800)]
sdio: optimize mmc tuning operation [1/1]
PD#SWPL-13914
Problem:
G12A TDMA affects the tuning, make tuning process
+/- dly is useless.
Solution:
add pdata save val operation.
Verify:
G12A_u212
Change-Id: I204dd989fae0d400b14725df068378be0262b1cc
Signed-off-by: Nan Li <nan.li@amlogic.com>
Xihai Zhu [Thu, 12 Sep 2019 10:05:13 +0000 (06:05 -0400)]
amvecm: detect out of range signal [1/1]
PD#SWPL-14102
Problem:
need to detect out of range signal
correctly
Solution:
refine the checking
Verify:
tl1
Change-Id: Ia2e47ca3a427e4f66a5464997aeb8dd766b4f7ff
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Hang Cheng [Wed, 11 Sep 2019 08:15:05 +0000 (16:15 +0800)]
hdmirx: add control for hdcp hpd [1/1]
PD#SWPL-14041
Problem:
sometimes after hpcp_hpd 0->1, ESM doesn't
respond to AKE_INIT, it will lead to flash
red screen on TCL DCLS-HG50
Solution:
add control for hpcp_hpd, keep it high by default
Verify:
X301
Change-Id: I8f8e5c880400084d6ed252667460c4e397b9909d
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Ruixuan Li [Fri, 23 Aug 2019 01:06:45 +0000 (09:06 +0800)]
emmc: run hs400 200M on tm2 [1/1]
PD#SWPL-12796
Problem:
tm2 is run hs200 200M now
Solution:
modify dts
Verify:
passed on tm2_t962e2_ab311
Change-Id: If834e822aefe3c9b469ff69ce58672a94caaabb4
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Xihai Zhu [Thu, 12 Sep 2019 02:34:11 +0000 (22:34 -0400)]
amvecm: fix failure for pattern detect [1/1]
PD#SWPL-14069
Problem:
special pattern is detected as colorbar
Solution:
tune the detection parameter
Verify:
tl1
Change-Id: I9079efe222888e6d9e2955c0cfd4f2d7ca0f6efa
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Shunzhou Jiang [Tue, 20 Aug 2019 12:09:13 +0000 (20:09 +0800)]
bl40: g12a/sm1: add m4 bringup path [1/3]
PD#SWPL-12964
Problem:
bring up m4
Solution:
add kernel driver
Verify:
U209+S905D3
Change-Id: Iaa57f24c919af013581b8e3faffb0b57f5af10ed
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Evoke Zhang [Wed, 4 Sep 2019 06:50:58 +0000 (14:50 +0800)]
tvafe: add 0x87, 0x11b support in pq trust list [1/1]
PD#SWPL-13775
Problem:
pq need update 0x87, 0x11b reg
Solution:
1.add 0x87, 0x11b support in pq trust list
2.update 0x87,0xfa,0x12e reg init setting for tl1
3.add dump regs for debug
Verify:
x301
Change-Id: I532d164f0fb7b01e817d19ece1498b970d40193e
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Luan Yuan [Thu, 20 Jun 2019 02:07:11 +0000 (10:07 +0800)]
dts: S905Y2 can not switch adb/usb. [1/1]
PD#SWPL-13103
Problem:
S905Y2 can not use adb.
Solution:
config dts, and switch the state in uboot.
setenv otg_device 0 or 1.
Verify:
verify by faraday.
Change-Id: If4cda761e346fb63d6918db74bc03f23cdcb3a1b
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Cao Jian [Tue, 10 Sep 2019 04:39:41 +0000 (12:39 +0800)]
osd: adjust threshold by using active_begin_line [2/2]
PD#SWPL-11936
Problem:
set screen position frequently
frame flashes white stripes
Solution:
modify threshold for updating all registers
on vsync coming
Verify:
Verfied on u212
Change-Id: Iac1ec8b5ec36809d5f5ffe2fe8e79c182e9c126b
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
Xihai Zhu [Wed, 11 Sep 2019 03:23:37 +0000 (23:23 -0400)]
amvecm: minor fix failure for color bar detect [1/1]
PD#SWPL-14019
Problem:
colorbar is not detected
Solution:
tune the detection parameter
Verify:
tl1
Change-Id: I0bdbe8a7fa5d55a7a5879959439dc87a51d86034
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
MingLiang Dong [Tue, 10 Sep 2019 05:51:46 +0000 (01:51 -0400)]
hdr: add hdr tone mapping ioctrol [1/1]
PD#SWPL-13948
Problem:
customer want to set hdr tone mapping curve themself,
we provide hdr interface for them
Solution:
add hdr iocontrol interface
Verify:
verify on TL1
Change-Id: I9b7d5b33e0a72c6d1ca1fca2ebffe2a3c7e460aa
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Hong Guo [Tue, 10 Sep 2019 05:40:39 +0000 (13:40 +0800)]
suspend: gxm can not enter suspend state issue [1/2]
PD#SWPL-13523
Problem:
gxm can't enter suspend
Solution:
modify the system sleep parameter
Verify:
gxm_q201
Change-Id: I697f03170a56925aa0fdb2160340cc0d480623a8
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
zhiwei.yuan [Mon, 9 Sep 2019 02:39:59 +0000 (10:39 +0800)]
vdin: System panic when calling stop_tvin_service twice continuously [1/1]
PD#SWPL-13880
Problem:
free_irq was called twice continuously while ponter is NULL at 2nd time.
Solution:
use mutex to prevent reentry
Verify:
verified by t962x2_x301
Change-Id: I8032d15de0a2fe5a1ab30b70af0e342d0aa3ac40
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Jihong Sui [Wed, 4 Sep 2019 06:41:40 +0000 (14:41 +0800)]
deinterlace: clear KASAN warning [1/1]
PD#SWPL-13378
Problem:
BUG: KASAN: use-after-free in di_task_handle+0x1dc/0x790
Solution:
add judgement before use
Verify:
u212
Change-Id: I6281257997239fa9adbe215ca31ef7d760c9302c
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jian Hu [Fri, 6 Sep 2019 11:47:02 +0000 (19:47 +0800)]
clk: tm2: fix pcie pll lock failed [1/1]
PD#SWPL-11934
Problem:
pcie pll lock failed some times
Solution:
1.add retry mechanism when pcie lock failed
2.add protection mechanism for all plls
Verify:
test passed on tm2 ab311
Change-Id: Id34e87d84e2bc2368c074556f500f8af1f2a4088
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Jihong Sui [Tue, 3 Sep 2019 07:21:04 +0000 (15:21 +0800)]
deinterlace: add retry for pre timeout [1/1]
PD#SWPL-13664
Problem:
when open some special UI app, DI will have a lot of timeout,
this cause display abnormal.
Solution:
add retry after timeout;
Verify:
tl1
Change-Id: I3316252577bad218256651ebbc6d4fd8b25acb12
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Xihai Zhu [Tue, 10 Sep 2019 01:55:27 +0000 (21:55 -0400)]
amvecm: minor fix for pattern detection function [1/1]
PD#SWPL-13075
Problem:
use the correct config option
Solution:
fix the wrong config option
Verify:
tl1
Change-Id: I87d3ba28c32fa77e12143522a4a342fdfe144af5
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Wencai You [Thu, 5 Sep 2019 14:44:36 +0000 (22:44 +0800)]
dv: HDR Luminance exceeded recommendation range [1/1]
PD#SWPL-13766
Problem:
HDR Luminance 285.5 exceeded recommendation range 300~400
Solution:
increase graphic target max luminuance for HDR output
Verify:
Verified on u212
Change-Id: Ib873f18843a1a93149d0454d67345071e512893b
Signed-off-by: Wencai You <wencai.you@amlogic.com>
Xihai Zhu [Fri, 23 Aug 2019 12:22:48 +0000 (08:22 -0400)]
amvecm: add pattern detection function [1/1]
PD#SWPL-13075
Problem:
some pattern need special handling
Solution:
per VLSI'e suggestion, add pattern
detection to try to detect special pattern
Verify:
tl1
Change-Id: I545b6e8c1b4a11fca927be46f16caeeb2cbe5327
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Shuai Li [Fri, 6 Sep 2019 08:26:02 +0000 (16:26 +0800)]
audio: mclk pad0 doesn't output clk [1/1]
PD#OTT-5603
Problem:
Configurate GPIO_AO 9 as mclk_0,it doesn't work.
Solution:
From SM1, the mclk pad register is changed.
Using standard clk tree to make it compitable.
Verify:
TM2, SM1.
Change-Id: I8d53296297536c90768495232570f33fc89db131
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Evoke Zhang [Tue, 3 Sep 2019 03:00:32 +0000 (11:00 +0800)]
tvafe: update 0x18b setting for av pali for tl1 [1/1]
PD#TV-8586
Problem:
av pali need update 0x18b setting
Solution:
update 0x18b setting for av pali for tl1
Verify:
x301
Change-Id: I64bddac5c4196110b46ebfbd7a89ee97095a7f82
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>