drm/modes: parse_cmdline: Add freestanding argument to drm_mode_parse_cmdline_options()

Add a freestanding function argument to drm_mode_parse_cmdline_options()
similar to how drm_mode_parse_cmdline_extra() already has this.

This is a preparation patch for allowing parsing of stand-alone options
without a mode before them, e.g.: video=HDMI-1:margin_right=14,...

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-6-hdegoede@redhat.com

drm/modes: parse_cmdline: Rework drm_mode_parse_cmdline_options()

Refactor drm_mode_parse_cmdline_options() so that it takes a pointer
to the first option, rather then a pointer to the ',' before the first
option.

This is a preparation patch for allowing parsing of stand-alone options
without a mode before them, e.g.: video=HDMI-1:margin_right=14,...

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-5-hdegoede@redhat.com

drm/modes: parse_cmdline: Accept extras directly after mode combined with options

Before this commit it was impossible to combine an extra mode argument
specified directly after the resolution with an option, e.g.
video=HDMI-1:720x480e,rotate=180 would not work, either the "e" to force
enable would need to be dropped or the ",rotate=180", otherwise the
mode_option would not be accepted.

This commit fixes this by setting parse_extras to true in this case, so
that drm_mode_parse_cmdline_res_mode() parses the extra arguments directly
after the resolution.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-4-hdegoede@redhat.com

drm/modes: parse_cmdline: Stop parsing extras after bpp / refresh at ', '

Before this commit it was impossible to add an extra mode argument after
a bpp or refresh specifier, combined with an option, e.g.
video=HDMI-1:720x480-24e,rotate=180 would not work, either the "e" to
force enable would need to be dropped or the ",rotate=180", otherwise
the mode_option would not be accepted.

This commit fixes this by fixing the length calculation if extras_ptr
is set to stop the extra parsing at the start of the options (stop at the
',' options_ptr points to).

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-3-hdegoede@redhat.com

drm/modes: parse_cmdline: Make various char pointers const

We are not supposed to modify the passed in string, make char pointers
used in drm_mode_parse_cmdline_options() const char * where possible.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-2-hdegoede@redhat.com

drm/modes: parse_cmdline: Fix possible reference past end of string

Before this commit, if the last option of a video=... option is for
example "rotate" without a "=<value>" after it then delim will point to
the terminating 0 of the string, and value which is sets to <delim + 1>
will point one position past the end of the string.

This commit fixes this by enforcing that the contents of delim equals '='
as it should be for options which take a value, this check is done in a
new drm_mode_parse_cmdline_int helper function which factors out the
common integer parsing code for all the options which take an int.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118155134.30468-1-hdegoede@redhat.com

drm/rockchip: dsi: add px30 support

Add the compatible and GRF definitions for the PX30 soc.

changes in v5:
- rebased on top of 5.5-rc1
- merged with dsi timing change to prevent ordering conflicts

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-7-heiko@sntech.de

dt-bindings: display: rockchip-dsi: add px30 compatible

The px30 SoC also uses a dw-mipi-dsi controller, so add the
compatible value for it.

changes in v5:
- rebased on top of 5.5-rc1
- merged with dsi timing change to prevent ordering conflicts

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-6-heiko@sntech.de

drm/rockchip: add ability to handle external dphys in mipi-dsi

While the common case is that the dsi controller uses an internal dphy,
accessed through the phy registers inside the dsi controller, there is
also the possibility to use a separate dphy from a different vendor.

One such case is the Rockchip px30 that uses a Innosilicon Mipi dphy,
so add the support for handling such a constellation, including the pll
also getting generated inside that external phy.

changes in v5:
- rebased on top of 5.5-rc1
- merged with dsi timing change to prevent ordering conflicts

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-5-heiko@sntech.de

dt-bindings: display: rockchip-dsi: document external phys

Some dw-mipi-dsi instances in Rockchip SoCs use external dphys.
In these cases the needs clock will also be generated externally
so these don't need the ref-clock as well.

changes in v5:
- rebased on top of 5.5-rc1
- merged with dsi timing change to prevent ordering conflicts

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-4-heiko@sntech.de

drm/bridge/synopsys: dsi: move phy_ops callbacks around panel enablement

If implementation-specific phy_ops need to be defined they probably
should be enabled before trying to talk to the panel and disabled only
after the panel was disabled.

Right now they are enabled last and disabled first, so might make it
impossible to talk to some panels - example for this being the px30
with an external Innosilicon dphy that needs the phy to be enabled
to transfer commands to the panel.

So move the calls appropriately.

changed in v5:
- rebased on top of 5.5-rc1
- merged with dsi timing change to prevent ordering conflicts

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Yannick Fertre <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-3-heiko@sntech.de

drm/bridge/synopsys: dsi: driver-specific configuration of phy timings

The timing values for dw-dsi are often dependent on the used display and
according to Philippe Cornu will most likely also depend on the used phy
technology in the soc-specific implementation.

To solve this and allow specific implementations to define them as needed
add a new get_timing callback to phy_ops and call this from the dphy_timing
function to retrieve the necessary values for the specific mode.

Right now this handles the hs2lp + lp2hs where Rockchip SoCs need handling
according to the phy speed, while STM seems to be ok with static values.

changes in v5:
- rebase on 5.5-rc1
- merge into px30 dsi series to prevent ordering conflicts

changes in v4:
- rebase to make it directly fit on top of drm-misc-next after all

changes in v3:
- check existence of phy_ops->get_timing in __dw_mipi_dsi_probe()
- emit actual error when get_timing() call fails
- add tags from Philippe and Yannick

changes in v2:
- add driver-specific handling, don't force all bridge users to use
  the same timings, as suggested by Philippe

Suggested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Yannick Fertre <yannick.fertre@st.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209143130.4553-2-heiko@sntech.de

drm/tilcdc: Remove obsolete bundled tilcdc tfp410 driver

Remove obsolete bundled tfp410 driver with its "ti,tilcdc,tfp410"
devicetree binding. No platform has ever used this driver in the
mainline kernel and if anybody connects tfp410 to tilcdc he or she
should use the generic drm tfp410 bridge driver.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e2db6c328467cc51e8d633ecb0ffa7c5736f2e8.1575901747.git.jsarha@ti.com

gpu/drm: ingenic: Add support for the JZ4770

The LCD controller in the JZ4770 supports up to 720p. While there has
been many new features added since the old JZ4740, which are not yet
handled here, this driver still works fine.

v2: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-6-paul@crapouillou.net
# *** extracted tags ***
Acked-by: Sam Ravnborg <sam@ravnborg.org>

gpu/drm: ingenic: Check for display size in CRTC atomic check

Check that the requested display size isn't above the limits supported
by the CRTC.

- JZ4750 and older support up to 800x600;
- JZ4755 supports up to 1024x576;
- JZ4760 and JZ4770 support up to 720p;
- JZ4780 supports up to 2k.

v2: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-5-paul@crapouillou.net
# *** extracted tags ***
Acked-by: Sam Ravnborg <sam@ravnborg.org>

gpu/drm: ingenic: Set max FB height to 4095

While the LCD controller can effectively only support a maximum
resolution of 800x600, the framebuffer's height can be much higher,
since we can change the Y start offset.

v2: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-4-paul@crapouillou.net
# *** extracted tags ***
Acked-by: Sam Ravnborg <sam@ravnborg.org>

gpu/drm: ingenic: Use the plane's src_[x,y] to configure DMA length

Instead of obtaining the width/height of the framebuffer from the CRTC
state, obtain it from the current plane state.

v2: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-3-paul@crapouillou.net
# *** extracted tags ***
Acked-by: Sam Ravnborg <sam@ravnborg.org>

gpu/drm: ingenic: Avoid null pointer deference in plane atomic update

It is possible that there is no drm_framebuffer associated with a given
plane state.

v2: Handle drm_plane->state which can be NULL too

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-2-paul@crapouillou.net
# *** extracted tags ***
Acked-by: Sam Ravnborg <sam@ravnborg.org>

dt-bindings: display/ingenic: Add compatible string for JZ4770

Add a compatible string for the LCD controller found in the JZ4770 SoC.

v2: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144142.33143-1-paul@crapouillou.net
# *** extracted tags ***
Acked-by: Sam Ravnborg <sam@ravnborg.org>

drm/sun4i: Remove unneeded semicolon in sun4i_layer.c

Fixes coccicheck warning:

drivers/gpu/drm/sun4i/sun4i_layer.c:253:3-4: Unneeded semicolon
drivers/gpu/drm/sun4i/sun4i_layer.c:257:2-3: Unneeded semicolon

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/1576317091-24968-3-git-send-email-zhengbin13@huawei.com

drm/sun4i: Remove unneeded semicolon in sun8i_mixer.c

Fixes coccicheck warning:

drivers/gpu/drm/sun4i/sun8i_mixer.c:289:3-4: Unneeded semicolon
drivers/gpu/drm/sun4i/sun8i_mixer.c:292:2-3: Unneeded semicolon
drivers/gpu/drm/sun4i/sun8i_mixer.c:302:3-4: Unneeded semicolon
drivers/gpu/drm/sun4i/sun8i_mixer.c:305:2-3: Unneeded semicolon

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/1576317091-24968-2-git-send-email-zhengbin13@huawei.com

drm/gma500: Pass GPIO for Intel MID using descriptors

The GMA500 driver is using the legacy GPIO API to fetch
three optional display control GPIO lines from the SFI
description used by the Medfield platform.

Switch this over to use GPIO descriptors and delete the
custom platform data.

We create three new static locals in the tc35876x bridge
code but it is hardly any worse than the I2C client static
local already there: I tried first to move it to the DRM
driver state container but there are workarounds for
probe order in the code so I just stayed off it, as the
result is unpredictable.

People wanting to do a more throrugh and proper cleanup
of the GMA500 driver can work on top of this, I can't
solve much more since I don't have access to the hardware,
I can only attempt to tidy up my GPIO corner.

Cc: Daniel Stone <daniels@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206094301.76368-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drm/atmel: plane_state->fb iff plane_state->crtc

Checking both is one too much, so wrap a WARN_ON around it to stope
the copypasta.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-3-daniel.vetter@ffwll.ch

drm/panel: Add Boe Himax8279d MIPI-DSI LCD panel

Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
panel.

V11:
- Use the backlight support in drm_panel to simplify the driver (Sam)

V10:
- Adjust init code, make the format more concise (Emil)

V9:
- kill off default_off_cmds (Emil)
- use mipi_dsi_dcs_set_display_{on,off} in their enable/disable
    callbacks. (Emil)
- Adjusting the delay function (Emil)

V8:
- modify PARENTHESIS_ALIGNMENT format (Sam)
- use gpios are required API replace optional gpio API (Emil)

V7:
- Modify communication address

V6:
- Add the information of the reviewer
- Remove unnecessary delays, The udelay_range code gracefully returns
    without hitting the scheduler on a delay of 0. (Derek)
- Merge the same data structures, like display_mode and off_cmds (Derek)
- Optimize the processing of results returned by
    devm_gpiod_get_optional (Derek)

V5:
- Add the information of the reviewer (Sam)
- Delete unnecessary header files #include <linux/fb.h> (Sam)
- The config DRM_PANEL_BOE_HIMAX8279D appears twice. Drop one of them (Sam)
- ADD static, set_gpios function is not used outside this module (Sam)

V4:
- Frefix all function maes with boe_ (Sam)
- Fsed "enable_gpio" replace "reset_gpio", Make it look clearer (Sam)
- Sort include lines alphabetically (Sam)
- Fixed entries in the makefile must be sorted alphabetically (Sam)
- Add send_mipi_cmds function to avoid duplicating the code (Sam)
- Add the necessary delay(reset_delay_t5) between reset and sending
    the initialization command (Rock wang)

V3:
- Remove unnecessary delays in sending initialization commands (Jitao Shi)

V2:
- Use SPDX identifier (Sam)
- Use necessary header files replace drmP.h (Sam)
- Delete unnecessary header files #include <linux/err.h> (Sam)
- Specifies a GPIOs array to control the reset timing,
    instead of reading "dsi-reset-sequence" data from DTS (Sam)
- Delete backlight_disable() function when already disabled (Sam)
- Use devm_of_find_backlight() replace of_find_backlight_by_node() (Sam)
- Move the necessary data in the DTS to the current file,
    like porch, display_mode and Init code etc. (Sam)
- Add compatible device "boe,himax8279d10p" (Sam)

V1:
- Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI
    panel.

Signed-off-by: Jerry Han <jerry.han.hq@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Rock wang <rock_wang@himax.com.cn>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fixed boe_panel_get_modes + backlight]
Link: https://patchwork.freedesktop.org/patch/msgid/20191212115208.3878-1-jerry.han.hq@gmail.com

drm/gma500: globle no more!

globle, goblin, moblin?

It's dead code, we lucked out.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211120001.1167980-1-daniel.vetter@ffwll.ch

media: constify fb ops across all drivers

Now that the fbops member of struct fb_info is const, we can start
making the ops const as well.

Remove the redundant fbops assignments while at it.

v2:
- actually add const in vivid
- fix typo (Christophe de Dinechin)

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: linux-media@vger.kernel.org
Cc: ivtv-devel@ivtvdriver.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/71794337f8611271f2c1fdb3882119a58e743a87.1575390741.git.jani.nikula@intel.com

drm/komeda: Enable new product D32 support

D32 is simple version of D71, the difference is:
- Only has one pipeline
- Drop the periph block and merge it to GCU

v2: Rebase.
v3: Isolate the block counting fix to a new patch

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084828.19664-3-james.qian.wang@arm.com

drm/komeda: Update the chip identify

1. Drop komeda-CORE product id comparison and put it into the d71_identify
2. Update pipeline node DT-binding:
   (a). Skip the needless pipeline DT node.
   (b). Return fail if the essential pipeline DT node is missing.

With these changes, for chips in same family no need to change the DT.

v2: Rebase
v3: Address Mihail's comments.

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084828.19664-2-james.qian.wang@arm.com

drm/komeda: Correct d71 register block counting

Per HW, d71->num_blocks includes reserved blocks but no PERIPH block,
correct the block counting accordingly.
D71 happens to only have one reserved block and periph block, which
hides this counting error.

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210061015.25905-1-james.qian.wang@arm.com

drm/udl: Remove udl_fb.c

The remaining code in udl_fb.c is unused. Remove the file entirely.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-10-tzimmermann@suse.de

drm/udl: Move udl_handle_damage() into udl_modeset.c

The only caller of udl_handle_damage() in the plane-update function
in udl_modeset.c. Move udl_handle_damage() there.

v2:
* remove udl_fb.c in a separate patch

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-9-tzimmermann@suse.de

drm/udl: Remove struct udl_device.active_fb_16

The udl driver stores the currently active framebuffer to know from
where to accept damage updates.

With the conversion to plane-state damage handling, this is not necessary
any longer. The currently active framebuffer and damaged area are always
stored in the plane state.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-8-tzimmermann@suse.de

drm/udl: Convert to drm_atomic_helper_dirtyfb()

The infrastruture for atomic modesetting allows us to use the generic
code for dirty-FB and damage handling. Switch over udl and remove the
driver's implementation. The simple-pipe's update function now picks up
the primary plane's damage and updates a minimal region of the screen.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-7-tzimmermann@suse.de

drm/udl: Set preferred color depth to 16 bpp

The current default color depth of 24 bpp is not even supported by
the driver. Being the native format for communicating with the adapter,
16 bpp is the correct choice.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-6-tzimmermann@suse.de

drm/udl: Inline DPMS code into CRTC enable and disable functions

DPMS functionality is only used by the CRTC's enable and disable
functions. Inline the code. The patch also adds symbolic constants
for the blank register and constants; according to udlfb, which is
a bit more detailed than DRM's udl.

v3:
* use symbolic constants for blank, according to udlfb driver

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-5-tzimmermann@suse.de

drm/udl: Switch to atomic suspend/resume helpers

We can use the generic suspend/resume helpers for atomic modesetting.
Switch udl over.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-4-tzimmermann@suse.de

drm/udl: Convert to struct drm_simple_display_pipe

Udl has a single display pipeline with a primary plane; perfect for
simple-pipe helpers. Convert it over. The old encoder and CRTC code
becomes unused and obsolete.

Exported formats for the primary plane are RGB565 and XRGB8888, with
the latter being emulated. The 16-bit format is the default and what
is used when communicating with the device.

This patch enables atomic modesetting for udl devices.

v3:
* remove unused field crtc from struct udl_device
* set crtc_state->no_vblank at beginning of enable()
v2:
* move suspend/resume changes into separate patch
* remove non-atomic code

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-3-tzimmermann@suse.de

drm/udl: Init connector before encoder and CRTC

To mimic simple-pipe, we initialize the connector before the rest of
the display pipeline.

v2:
* remove unnecessary calls to drm_connector_{register,unregister}()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-2-tzimmermann@suse.de

drm/edid: Increase size of VDB and CMDB bitmaps to 256 bits

CEA-861-G adds modes up to 219, so increase the size of the
maps in preparation for adding the new modes to drm_edid.c.

Signed-off-by: Thomas Anderson <thomasanderson@google.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210221048.83628-1-thomasanderson@google.com

auxdisplay: constify fb ops

Now that the fbops member of struct fb_info is const, we can start
making the ops const as well.

Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
Cc: Robin van der Gracht <robin@protonic.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/31c18e3ce9d6962aabda4799b3051039ff591c92.1575390741.git.jani.nikula@intel.com

kselftests: Add dma-heap test

Add very trivial allocation and import test for dma-heaps,
utilizing the vgem driver as a test importer.

A good chunk of this code taken from:
  tools/testing/selftests/android/ion/ionmap_test.c
  Originally by Laura Abbott <labbott@redhat.com>

Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Sandeep Patil <sspatil@android.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Tested-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203172641.66642-6-john.stultz@linaro.org

dma-buf: heaps: Add CMA heap to dmabuf heaps

This adds a CMA heap, which allows userspace to allocate
a dma-buf of contiguous memory out of a CMA region.

This code is an evolution of the Android ION implementation, so
thanks to its original author and maintainters:
  Benjamin Gaignard, Laura Abbott, and others!

NOTE: This patch only adds the default CMA heap. We will enable
selectively adding other CMA memory regions to the dmabuf heaps
interface with a later patch (which requires a dt binding)

Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Sandeep Patil <sspatil@android.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Tested-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203172641.66642-5-john.stultz@linaro.org

dma-buf: heaps: Add system heap to dmabuf heaps

This patch adds system heap to the dma-buf heaps framework.

This allows applications to get a page-allocator backed dma-buf
for non-contiguous memory.

This code is an evolution of the Android ION implementation, so
thanks to its original authors and maintainters:
  Rebecca Schultz Zavin, Colin Cross, Laura Abbott, and others!

Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Sandeep Patil <sspatil@android.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Tested-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203172641.66642-4-john.stultz@linaro.org

dma-buf: heaps: Add heap helpers

Add generic helper dmabuf ops for dma heaps, so we can reduce
the amount of duplicative code for the exported dmabufs.

This code is an evolution of the Android ION implementation, so
thanks to its original authors and maintainters:
  Rebecca Schultz Zavin, Colin Cross, Laura Abbott, and others!

Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Sandeep Patil <sspatil@android.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Tested-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203172641.66642-3-john.stultz@linaro.org

dma-buf: Add dma-buf heaps framework

This framework allows a unified userspace interface for dma-buf
exporters, allowing userland to allocate specific types of memory
for use in dma-buf sharing.

Each heap is given its own device node, which a user can allocate
a dma-buf fd from using the DMA_HEAP_IOC_ALLOC.

This code is an evoluiton of the Android ION implementation,
and a big thanks is due to its authors/maintainers over time
for their effort:
  Rebecca Schultz Zavin, Colin Cross, Benjamin Gaignard,
  Laura Abbott, and many other contributors!

Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Sandeep Patil <sspatil@android.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203172641.66642-2-john.stultz@linaro.org

drm/drm_panel: fix EXPORT of drm_panel_of_backlight

Fix link failure for module builds of panels.
The conditional compilation around drm_panel_of_backlight()
was wrong for a module build.
Fix it using IS_ENABLED().

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 152dbdeab1b2 ("drm/panel: add backlight support")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191210194758.24087-1-sam@ravnborg.org

drm/doc: Drop :c:func: markup

Kernel sphinx has learned how to do that in

commit d74b0d31dddeac2b44c715588d53d9a1e5b1158e
Author: Jonathan Corbet <corbet@lwn.net>
Date:   Thu Apr 25 07:55:07 2019 -0600

    Docs: An initial automarkup extension for sphinx

Unfortunately it hasn't learned that yet for structures, so we're
stuck with the :c:type: noise for now still.

Reviewed-by: Thierry Reding <treding@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204101933.861169-1-daniel.vetter@ffwll.ch

drm/atomic: Update docs around locking and commit sequencing

Both locking and especially sequencing of nonblocking commits have
evolved a lot. The details are all there, but I noticed that the big
picture and connections have fallen behind a bit. Apply polish.

Motivated by some review discussions with Thierry.

v2: Review from Thierry

Reviewed-by: Thierry Reding <treding@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204100011.859468-1-daniel.vetter@ffwll.ch

drm/bridge: panel: export drm_panel_bridge_connector

The function was unexported and was causing link failures for pl111 (and
probably the other user tve200) in a module build.

Fixes: d383fb5f8add ("drm: get drm_bridge_panel connector via helper")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linux Walleij <linux.walleij@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144834.27491-1-mihail.atanassov@arm.com

drm/ast: Store primary-plane format in struct ast_crtc_state

Reading the primary plane's framebuffer from the CRTC's atomic_flush()
function is fragile as the plane state or framebuffer can be NULL.
Instead, we let the plane's atomic_check() store the framebuffer format
in the CRTC state. The CRTC always receives the framebuffer format that
is currently programmed, or NULL if no mode has been set yet.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-8-tzimmermann@suse.de

drm/ast: Store VBIOS mode info in struct ast_crtc_state

After looking up VBIOS mode information in CRTC's atomic_check(), we
can reuse it in atomic_flush(). No need for a second look-up.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-7-tzimmermann@suse.de

drm/ast: Introduce struct ast_crtc_state

AST-specific CRTC state can be placed in the new struct ast_crtc_state.
The atomic check functions of the CRTC and the primary plane will store
the VBIOS mode info and the framebuffer format here. The CRTC will consume
these during atomic_flush().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-6-tzimmermann@suse.de

drm/ast: Add plane atomic_check() functions

Introducing atomic_check() for priamry and cursor plane. The functions
validate the plane state and will later set format information for the
CRTC's atomic_flush().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-5-tzimmermann@suse.de

drm/ast: Clean up arguments of register functions

In preparation of an update of the primary-plane code, this patch
changes the arguments of several register-setting functions. No
functional changes are made. The function ast_set_dac_reg() has no
effect and therefore gets removed entirely.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-4-tzimmermann@suse.de

drm/ast: Enable and disable screen in primary-plane functions

Enabling and disabling the screen used to be done in the register
initialization and the DPMS function. None of these places is related
to the screen's output.

Now the primary plane's update and disable functions handle screen
display state. The primary plane can now be switched off without
displaying garbage.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-3-tzimmermann@suse.de

drm/ast: Move modesetting code to CRTC's atomic_flush()

When enabling the CRTC after waking up from a power-saving mode, the
primary plane's framebuffer might be NULL, which leads to a stack trace
as shown below.

  [  632.624608] BUG: kernel NULL pointer dereference, address: 0000000000000048
  [  632.624631] #PF: supervisor read access in kernel mode
  [  632.624639] #PF: error_code(0x0000) - not-present page
  [  632.624647] PGD 0 P4D 0
  [  632.624654] Oops: 0000 [#1] SMP PTI
  [  632.624662] CPU: 0 PID: 2082 Comm: gnome-shell Tainted: G            E     5.4.0-rc7-1-default+ #114
  [  632.624673] Hardware name: Sun Microsystems SUN FIRE X2270 M2/SUN FIRE X2270 M2, BIOS 2.05    07/01/2010
  [  632.624689] RIP: 0010:ast_crtc_helper_atomic_enable+0x7d/0x680 [ast]
  [  632.624698] Code: 48 8b 80 e0 02 00 00 4c 8b 60 10 31 c0 f3 48 ab 48 8b 83 78 04 00 00 4c 89 ef 48 8d 70 18 e8 9a e9 55 ce 48 8b 83 78 04 00 00 <49> 8b 7c 24 48 4c 89 ea 4c 8d 44 24 28 48 8d 4c 24 20 48 8d 70 18
  [  632.624718] RSP: 0018:ffffbe9ec123fa40 EFLAGS: 00010246
  [  632.624726] RAX: ffff95a13cfd3400 RBX: ffff95a13cf32000 RCX: 0000000000000000
  [  632.624735] RDX: 0000000000000000 RSI: ffff95a13cfd34e8 RDI: ffffbe9ec123fb40
  [  632.624744] RBP: ffffbe9ec123fb80 R08: 0000000000000000 R09: 0000000000000003
  [  632.624753] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
  [  632.624762] R13: ffffbe9ec123fa70 R14: ffff95a13beb7000 R15: ffff95a13cf32800
  [  632.624772] FS:  00007f6d2763e140(0000) GS:ffff95a134000000(0000) knlGS:0000000000000000
  [  632.624782] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [  632.624790] CR2: 0000000000000048 CR3: 00000001192f8004 CR4: 00000000000206f0
  [  632.624800] Call Trace:
  [  632.624811]  ? __lock_acquire+0x409/0x7c0
  [  632.624830]  drm_atomic_helper_commit_modeset_enables+0x1af/0x200
  [  632.624840]  drm_atomic_helper_commit_tail+0x32/0x70
  [  632.624849]  commit_tail+0xc7/0x110
  [  632.624857]  drm_atomic_helper_commit+0x121/0x130
  [  632.624867]  drm_atomic_connector_commit_dpms+0xd7/0x100
  [  632.624878]  set_property_atomic+0xaf/0x110
  [  632.624890]  drm_mode_obj_set_property_ioctl+0xbb/0x190
  [  632.624899]  ? drm_mode_obj_find_prop_id+0x40/0x40
  [  632.624909]  drm_ioctl_kernel+0x86/0xd0
  [  632.624918]  drm_ioctl+0x1e4/0x36b
  [  632.624925]  ? drm_mode_obj_find_prop_id+0x40/0x40
  [  632.624939]  do_vfs_ioctl+0x4bd/0x6e0
  [  632.624949]  ksys_ioctl+0x5e/0x90
  [  632.624957]  __x64_sys_ioctl+0x16/0x20
  [  632.624966]  do_syscall_64+0x5a/0x220
  [  632.624976]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [  632.624984] RIP: 0033:0x7f6d2b0de387
  [  632.624991] Code: 00 00 90 48 8b 05 f9 9a 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c9 9a 0c 00 f7 d8 64 89 01 48
  [  632.625011] RSP: 002b:00007fffb49def38 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  [  632.625021] RAX: ffffffffffffffda RBX: 00007fffb49def70 RCX: 00007f6d2b0de387
  [  632.625030] RDX: 00007fffb49def70 RSI: 00000000c01864ba RDI: 0000000000000009
  [  632.625040] RBP: 00000000c01864ba R08: 0000000000000000 R09: 00000000c0c0c0c0
  [  632.625049] R10: 0000000000000030 R11: 0000000000000246 R12: 000055bc367eb920
  [  632.625058] R13: 0000000000000009 R14: 0000000000000002 R15: 0000000000000000
  [  632.625071] Modules linked in: ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) af_packet(E) scsi_transport_iscsi(E) dmi_sysfs(E) msr(E) xfs(E) intel_powerclamp(E) coretemp(E) k)
  [  632.625185] CR2: 0000000000000048

The STR is

* start gdm and wait for it to switch off the display
* wake up the display by pressing a key

CRTC modesetting depends on the new state of the CRTC and the primary
plane's framebuffer. The bugfix moves the modesetting code into the
CRTC's atomic_flush() function, where it is protected from the plane's
framebuffer being NULL.

The CRTC's atomic-enable function, which is the modesetting's original
location, still contains DPMS state handling. It's exactly the inverse
of the atomic-disable function.

v3:
* protect modesetting from from fb == NULL
v2:
* do an atomic check for plane
* reject invisible primary planes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes: b48e1b6ffd28 ("drm/ast: Add CRTC helpers for atomic modesetting")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-2-tzimmermann@suse.de

drm/meson: crtc: add OSD1 plane AFBC commit

Finally, setup the VIU registers and start the AFBC decoder to support
displaying AFBC encoded buffers on Amlogic GXM and G12A SoCs.

The RDMA is used here to reset and program the AFBC decoder unit
on each vsync without involving the interrupt handler that can
be masked for a long period of time, producing display glitches.

The vsync irq must still be left enabled otherwise the RDMA modules isn't
trigerred when the interrupt line is masked.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-10-narmstrong@baylibre.com

drm/meson: hold 32 lines after vsync to give time for AFBC start

When using an AFBC encoded frame, the AFBC Decoder must be reset,
configured and enabled at each vsync IRQ.

To leave time for that, use the maximum lines hold time to give time
for AFBC setup and avoid visual glitches.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
[narmstrong: fix typo in commit log]
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-9-narmstrong@baylibre.com

drm/meson: viu: add AFBC modules routing functions

The Amlogic G12A AFBC Decoder pixel input need to be routed diferently
than the Amlogic GXM AFBC decoder, this adds support for routing the
VIU OSD1 pixel source to the AFBC "Mali Unpack" module.

This "Mali Unpack" module is also configured with a static RGBA mapping
for now until we support more pixel formats.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-8-narmstrong@baylibre.com

drm/meson: plane: add support for AFBC mode for OSD1 plane

This adds all the OSD configuration plumbing to support the AFBC decoders
path to display of the OSD1 plane.

The Amlogic GXM and G12A AFBC decoders are integrated very differently.

The Amlogic GXM has a direct output path to the OSD1 VIU pixel input,
because the GXM AFBC decoder seem to be a custom IP developed by Amlogic.

On the other side, the Amlogic G12A AFBC decoder seems to be an external
IP that emit pixels on an AXI master hooked to a "Mali Unpack" block
feeding the OSD1 VIU pixel input.
This uses a weird "0x1000000" internal HW physical address on both
sides to transfer the pixels.

For Amlogic GXM, the supported pixel formats are the same as the normal
linear OSD1 mode.

On the other side, Amlogic added support for all AFBC v1.2 formats for
the G12A AFBC integration.

For simplicity, we stick to the already supported formats for now.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-7-narmstrong@baylibre.com

drm/meson: Add AFBCD module driver

This adds the driver for the ARM Framebuffer Compression decoders found
in the Amlogic GXM and G12A SoCs.

The Amlogic GXM and G12A AFBC decoder are totally different, the GXM only
handling only the AFBC v1.0 modes and the G12A decoder handling the
AFBC v1.2 modes.

The G12A AFBC decoder is an external IP integrated in the video pipeline,
and the GXM AFBC decoder seems to the an Amlogic custom decoder more
tighly integrated in the video pipeline.

The GXM AFBC decoder can handle only one AFBC plane for 2 available
OSD planes available in HW, and the G12A AFBC decoder can handle up
to 4 AFBC planes for up to 3 OSD planes available in HW.

The Amlogic GXM supports 16x16 SPARSE and 16x16 SPLIT AFBC buffers up
to 4k.

On the other side, for G12A SPLIT is mandatory in 16x16 block mode, but
for 4k modes 32x8+SPLIT AFBC buffers is manadatory for performances reasons.

The RDMA is used here to reset and program the AFBC decoder unit
on each vsync without involving the interrupt handler that can
be masked for a long period of time, producing display glitches.

For this we use the meson_rdma_writel_sync() which adds the register
write tuple (VPU register offset and register value) to the RDMA buffer
and write the value to the HW.

When enabled, the RDMA is enabled to rewrite the same sequence at the
next VSYNC event, until a new buffer is committed to the OSD plane.

Then the Amlogic G12A is switched to RDMA, the Amlogic GXM Decoder
doesn't need a reset/reprogram at each vsync, but needs to keep the
vsync interrupt enabled to trigger the RDMA module.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
[narmstrong: fixed typo in commit log]
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-6-narmstrong@baylibre.com

drm/meson: add RDMA module driver

The VPU embeds a "Register DMA" that can write a sequence of registers
on the VPU AHB bus, either manually or triggered by an internal IRQ
event like VSYNC or a line input counter.

The initial implementation handles a single channel (over 8), triggered
by the VSYNC irq and does not handle the RDMA irq.

The RDMA will be usefull to reset and program the AFBC decoder unit
on each vsync without involving the interrupt handler that can
be masked for a log period of time, producing display glitches.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-5-narmstrong@baylibre.com

drm/meson: store the framebuffer width for plane commit

Also store the framebuffer width in the private common struct
to be used by the AFBC decoder module driver when committing the AFBC
plane.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-4-narmstrong@baylibre.com

drm/meson: add RDMA register bits defines

The Amlogic VPU embeds a "Register DMA" that can write a sequence of registers
on the VPU AHB bus, either manually or triggered by an internal IRQ event like
VSYNC or a line input counter.

This adds the register defines.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-3-narmstrong@baylibre.com

drm/meson: add AFBC decoder registers for GXM and G12A

Add the registers used to program the ARM Framebuffer Compression decoders
used in the Amlogic GXM and G12A SoCs families.

This also adds the routing and pipeline configuration bits and registers
needed to enable AFBC support.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-2-narmstrong@baylibre.com

samples: vfio-mdev: constify fb ops

Now that the fbops member of struct fb_info is const, we can start
making the ops const as well.

v2: fix typo (Christophe de Dinechin)

Cc: Kirti Wankhede <kwankhede@nvidia.com>
Cc: kvm@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ddb10df1316ef585930cda7718643a580f4fe37b.1575390741.git.jani.nikula@intel.com

drm/panel: tpo-tpg110: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-26-sam@ravnborg.org

drm/panel: tpo-td028ttec1: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-25-sam@ravnborg.org

drm/panel: sitronix-st7789v: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-24-sam@ravnborg.org

drm/panel: sitronix-st7701: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-23-sam@ravnborg.org

drm/panel: sharp-ls043t1le01: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-22-sam@ravnborg.org

drm/panel: sharp-lq101r1sx01: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-21-sam@ravnborg.org

drm/panel: seiko-43wvf1g: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-20-sam@ravnborg.org

drm/panel: ronbo-rb070d30: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-19-sam@ravnborg.org

drm/panel: rocktech-jh057n00900: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver.
While touching the include files sort them
and divide them up in blocks.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-18-sam@ravnborg.org

drm/panel: raydium-rm68200: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-17-sam@ravnborg.org

drm/panel: panasonic-vvx10f034n00: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-16-sam@ravnborg.org

drm/panel: osd-osd101t2587-53ts: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-15-sam@ravnborg.org

drm/panel: olimex-lcd-olinuxino: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-14-sam@ravnborg.org

drm/panel: lvds: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-13-sam@ravnborg.org

drm/panel: kingdisplay-kd097d04: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-12-sam@ravnborg.org

drm/panel: innolux-p079zca: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-11-sam@ravnborg.org

drm/panel: ilitek-ili9881c: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-10-sam@ravnborg.org

drm/panel: feiyang-fy07024di26a30d: use drm_panel backlight support

Use the backlight support in drm_panel to simplify the driver

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-9-sam@ravnborg.org

drm/panel: drop drm_device from drm_panel

The panel drivers used drm_panel.drm for two purposes:
1) Argument to drm_mode_duplicate()
2) drm->dev was used in error messages

The first usage is replaced with drm_connector.dev
- drm_connector is already connected to a drm_device
  and we have a valid connector

The second usage is replaced with drm_panel.dev
- this makes drivers more consistent in their dev argument
  used for dev_err() and friends

With these replacements there are no more uses of drm_panel.drm,
so it is removed from struct drm_panel.
With this change drm_panel_attach() and drm_panel_detach()
no longer have any use as they are empty functions.

v2:
  - editorial correction in changelog (Laurent)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-8-sam@ravnborg.org

drm/panel: decouple connector from drm_panel

To facilitate moving connector creation to display drivers,
decouple the drm_connector from drm_panel.

This patch adds a connector argument to drm_panel_get_modes().

All users of drm_panel_get_modes() already had the connector
available, so updating users was trivial.

With this patch drm_panel no longer keeps a reference to the drm_connector.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@nxp.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Torsten Duwe <duwe@lst.de>
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Allison Randal <allison@lohutok.net>
Cc: Shayenne Moura <shayenneluzmoura@gmail.com>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-7-sam@ravnborg.org

drm/panel: add drm_connector argument to get_modes()

Today the bridge creates the drm_connector, but that is planned
to be moved to the display drivers.
To facilitate this, update drm_panel_funcs.get_modes() to
take drm_connector as an argument.
All panel drivers implementing get_modes() are updated.

v2:
  - drop accidental change (Laurent)
  - update docs for get_modes (Laurent)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-6-sam@ravnborg.org

drm: get drm_bridge_panel connector via helper

The drm_connector created by drm_panel_bridge was accessed
via drm_panel.connector.
Avoid the detour around drm_panel by providing a simple get method.
This avoids direct access to the connector field in drm_panel in
the two users.

The change is done in preparation for removal of drm_panel.connector.

Update pl111 and tve200 to use the new helper.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Eric Anholt <eric@anholt.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-5-sam@ravnborg.org

drm/panel: simple: use drm_panel backlight support

Use drm_panel infrastructure for backlight.
Replace direct calls with drm_panel_*() calls
to utilize the drm_panel support.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-4-sam@ravnborg.org

drm/panel: add backlight support

Panels often support backlight as specified in a device tree.
Update the drm_panel infrastructure to support this to
simplify the drivers.

With this the panel driver just needs to add the following to the
probe() function:

    err = drm_panel_of_backlight(panel);
    if (err)
            return err;

Then drm_panel will handle all the rest.

There is one caveat with the backlight support.
If drm_panel_(enable|disable) are called multiple times
in a row then backlight_(enable|disable) will be called multiple times.

The above will happen when a panel drivers unconditionally
calls drm_panel_disable() in their shutdown() function,
whan the panel is already disabled and then shutdown() is called.

Reading the backlight code it seems safe to call
the backlight_(enable|disable) several times.

v3:
- Improve comments, fix grammar (Laurent)
- Do not fail in drm_panel_of_backlight() if no DT support (Laurent)
- Log if backlight_(enable|disable) fails (Laurent)
- Improve drm_panel_of_backlight() docs
- Updated changelog with backlight analysis (triggered by Laurent)

v2:
- Drop test of CONFIG_DRM_PANEL in header-file (Laurent)
- do not enable backlight if ->enable() returns an error

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-3-sam@ravnborg.org

drm/drm_panel: no error when no callback

The callbacks in drm_panel_funcs are optional, so do not
return an error just because no callback is assigned.

v2:
- Document what functions in drm_panel_funcs are optional (Laurent)
- Return -EOPNOTSUPP if get_modes() is not assigned (Laurent)
  (Sam: -EOPNOTSUPP seems to best error code in this situation)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-2-sam@ravnborg.org

drm/gma500: add a missed gma_power_end in error path

oaktrail_lvds_mode_set() misses a gma_power_end() in an error path.
Add the call to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209085747.16057-1-hslester96@gmail.com

HID: picoLCD: constify fb ops

Now that the fbops member of struct fb_info is const, we can start
making the ops const as well.

v2: fix typo (Christophe de Dinechin)

Cc: Bruno Prémont <bonbons@linux-vserver.org>
Cc: linux-input@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Bruno Prémont <bonbons@linux-vserver.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f415010cd52cce7d8a1250d4eca582ec64e67956.1575390741.git.jani.nikula@intel.com

drm/bridge: Clarify the atomic enable/disable hooks semantics

The [pre_]enable/[post_]disable hooks are passed the old atomic state.
Update the doc and rename the arguments to make it clear.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-8-boris.brezillon@collabora.com

drm/bridge: Add the drm_bridge_get_prev_bridge() helper

The drm_bridge_get_prev_bridge() helper will be useful for bridge
drivers that want to do bus format negotiation with their neighbours.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-7-boris.brezillon@collabora.com

drm/bridge: Add the drm_for_each_bridge_in_chain() helper

To iterate over all bridges attached to a specific encoder.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-6-boris.brezillon@collabora.com

drm/bridge: Make the bridge chain a double-linked list

So that each element in the chain can easily access its predecessor.
This will be needed to support bus format negotiation between elements
of the bridge chain.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-5-boris.brezillon@collabora.com

drm: Stop accessing encoder->bridge directly

We are about to replace the single-linked bridge list by a double-linked
one based on list.h, leading to the suppression of the encoder->bridge
field. But before we can do that we must provide a
drm_bridge_chain_get_first_bridge() bridge helper and patch all drivers
and core helpers to use it instead of directly accessing encoder->bridge.

Note that we still have 2 drivers (VC4 and Exynos) manipulating the
encoder->bridge field directly because they need to cut the bridge chain
in order to control the enable/disable sequence. This is definitely
not something we want to encourage, so let's keep those 2 oddities
around until we find a better solution.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-4-boris.brezillon@collabora.com

drm/bridge: Introduce drm_bridge_get_next_bridge()

And use it in drivers accessing the bridge->next field directly.
This is part of our attempt to make the bridge chain a double-linked list
based on the generic list helpers.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-3-boris.brezillon@collabora.com

drm/bridge: Rename bridge helpers targeting a bridge chain

Change the prefix of bridge helpers targeting a bridge chain from
drm_bridge_ to drm_bridge_chain_ to better reflect the fact that
the operation will happen on all elements of chain, starting at the
bridge passed in argument.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-2-boris.brezillon@collabora.com