xen: make xen_qlock_wait() nestable

commit a856531951dc8094359dfdac21d59cee5969c18e upstream.

xen_qlock_wait() isn't safe for nested calls due to interrupts. A call
of xen_qlock_kick() might be ignored in case a deeper nesting level
was active right before the call of xen_poll_irq():

CPU 1:                                   CPU 2:
spin_lock(lock1)
                                         spin_lock(lock1)
                                         -> xen_qlock_wait()
                                            -> xen_clear_irq_pending()
                                            Interrupt happens
spin_unlock(lock1)
-> xen_qlock_kick(CPU 2)
spin_lock_irqsave(lock2)
                                         spin_lock_irqsave(lock2)
                                         -> xen_qlock_wait()
                                            -> xen_clear_irq_pending()
                                               clears kick for lock1
                                            -> xen_poll_irq()
spin_unlock_irq_restore(lock2)
-> xen_qlock_kick(CPU 2)
                                            wakes up
                                         spin_unlock_irq_restore(lock2)
                                         IRET
                                           resumes in xen_qlock_wait()
                                           -> xen_poll_irq()
                                           never wakes up

The solution is to disable interrupts in xen_qlock_wait() and not to
poll for the irq in case xen_qlock_wait() is called in nmi context.

Cc: stable@vger.kernel.org
Cc: Waiman.Long@hp.com
Cc: peterz@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: fix race in xen_qlock_wait()

commit 2ac2a7d4d9ff4e01e36f9c3d116582f6f655ab47 upstream.

In the following situation a vcpu waiting for a lock might not be
woken up from xen_poll_irq():

CPU 1:                CPU 2:                      CPU 3:
takes a spinlock
                      tries to get lock
                      -> xen_qlock_wait()
frees the lock
-> xen_qlock_kick(cpu2)
                        -> xen_clear_irq_pending()

takes lock again
                                                  tries to get lock
                                                  -> *lock = _Q_SLOW_VAL
                        -> *lock == _Q_SLOW_VAL ?
                        -> xen_poll_irq()
frees the lock
-> xen_qlock_kick(cpu3)

And cpu 2 will sleep forever.

This can be avoided easily by modifying xen_qlock_wait() to call
xen_poll_irq() only if the related irq was not pending and to call
xen_clear_irq_pending() only if it was pending.

Cc: stable@vger.kernel.org
Cc: Waiman.Long@hp.com
Cc: peterz@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/balloon: Support xend-based toolstack

commit 3aa6c19d2f38be9c6e9a8ad5fa8e3c9d29ee3c35 upstream.

Xend-based toolstacks don't have static-max entry in xenstore. The
equivalent node for those toolstacks is memory_static_max.

Fixes: 5266b8e4445c (xen: fix booting ballooned down hvm guest)
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org> # 4.13
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/blkfront: avoid NULL blkfront_info dereference on device removal

commit f92898e7f32e3533bfd95be174044bc349d416ca upstream.

If a block device is hot-added when we are out of grants,
gnttab_grant_foreign_access fails with -ENOSPC (log message "28
granting access to ring page") in this code path:

  talk_to_blkback ->
setup_blkring ->
xenbus_grant_ring ->
gnttab_grant_foreign_access

and the failing path in talk_to_blkback sets the driver_data to NULL:

 destroy_blkring:
        blkif_free(info, 0);

        mutex_lock(&blkfront_mutex);
        free_info(info);
        mutex_unlock(&blkfront_mutex);

        dev_set_drvdata(&dev->dev, NULL);

This results in a NULL pointer BUG when blkfront_remove and blkif_free
try to access the failing device's NULL struct blkfront_info.

Cc: stable@vger.kernel.org # 4.5 and later
Signed-off-by: Vasilis Liaskovitis <vliaskovitis@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: Restore functionality to xen vtpm driver.

commit e487a0f52301293152a6f8c4e217f2a11dd808e3 upstream.

Functionality of the xen-tpmfront driver was lost secondary to
the introduction of xenbus multi-page support in commit ccc9d90a9a8b
("xenbus_client: Extend interface to support multi-page ring").

In this commit pointer to location of where the shared page address
is stored was being passed to the xenbus_grant_ring() function rather
then the address of the shared page itself. This resulted in a situation
where the driver would attach to the vtpm-stubdom but any attempt
to send a command to the stub domain would timeout.

A diagnostic finding for this regression is the following error
message being generated when the xen-tpmfront driver probes for a
device:

<3>vtpm vtpm-0: tpm_transmit: tpm_send: error -62

<3>vtpm vtpm-0: A TPM error (-62) occurred attempting to determine
the timeouts

This fix is relevant to all kernels from 4.1 forward which is the
release in which multi-page xenbus support was introduced.

Daniel De Graaf formulated the fix by code inspection after the
regression point was located.

Fixes: ccc9d90a9a8b ("xenbus_client: Extend interface to support multi-page ring")
Signed-off-by: Dr. Greg Wettstein <greg@enjellic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[boris: Updated commit message, added Fixes tag]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org # v4.1+
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

xen-swiotlb: use actually allocated size on check physical continuous

commit 7250f422da0480d8512b756640f131b9b893ccda upstream.

xen_swiotlb_{alloc,free}_coherent() allocate/free memory based on the
order of the pages and not size argument (bytes). This is inconsistent with
range_straddles_page_boundary and memset which use the 'size' value,
which may lead to not exchanging memory with Xen (range_straddles_page_boundary()
returned true). And then the call to xen_swiotlb_free_coherent() would
actually try to exchange the memory with Xen, leading to the kernel
hitting an BUG (as the hypercall returned an error).

This patch fixes it by making the 'size' variable be of the same size
as the amount of memory allocated.

CC: stable@vger.kernel.org
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Christoph Helwig <hch@lst.de>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: John Sobecki <john.sobecki@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: Mark 1 GHz CPU OPP as suspend OPP on Exynos5250

commit 645b23da6f8b47f295fa87051335d41d139717a5 upstream.

1 GHz CPU OPP is the default boot value for the Exynos5250 SOC, so mark it
as suspend OPP. This fixes suspend/resume on Samsung Exynos5250 Snow
Chomebook, which was broken since switching to generic cpufreq-dt driver
in v4.3.

Cc: <stable@vger.kernel.org> # 4.3.x: cd6f55457eb4: ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes
Cc: <stable@vger.kernel.org> # 4.3.x: 672f33198bee: arm: dts: exynos: Add missing cooling device properties for CPUs
Cc: <stable@vger.kernel.org> # 4.3.x
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: Convert exynos5250.dtsi to opp-v2 bindings

commit eb9e16d8573e243f8175647f851eb5085dbe97a4 upstream.

Convert Exynos5250 to OPP-v2 bindings. This is a preparation to add proper
support for suspend operation point, which cannot be marked in opp-v1.

Cc: <stable@vger.kernel.org> # 4.3.x: cd6f55457eb4: ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes
Cc: <stable@vger.kernel.org> # 4.3.x: 672f33198bee: arm: dts: exynos: Add missing cooling device properties for CPUs
Cc: <stable@vger.kernel.org> # 4.3.x
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

OPP: Free OPP table properly on performance state irregularities

commit 2fbb8670b4ff4454f1c0de510f788d737edc4b90 upstream.

The OPP table was freed, but not the individual OPPs which is done from
_dev_pm_opp_remove_table(). Fix it by calling _dev_pm_opp_remove_table()
as well.

Cc: 4.18 <stable@vger.kernel.org> # v4.18
Fixes: 3ba98324e81a ("PM / OPP: Get performance state using genpd helper")
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to account IO correctly

commit 4c58ed076875f36dae0f240da1e25e99e5d4afb8 upstream.

Below race can cause reversed reference on dirty count, fix it by
relocating __submit_bio() and inc_page_count().

Thread A Thread B
- f2fs_inplace_write_data
 - f2fs_submit_page_bio
  - __submit_bio
- f2fs_write_end_io
 - dec_page_count
  - inc_page_count

Cc: <stable@vger.kernel.org>
Fixes: d1b3e72d5490 ("f2fs: submit bio of in-place-update pages")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to recover cold bit of inode block during POR

commit ef2a007134b4eaa39264c885999f296577bc87d2 upstream.

Testcase to reproduce this bug:
1. mkfs.f2fs /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr +A /mnt/f2fs/file
6. xfs_io -f /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. chattr -A /mnt/f2fs/file
11. xfs_io -f /mnt/f2fs/file -c "fsync"
12. umount /mnt/f2fs
13. mount -t f2fs /dev/sdd /mnt/f2fs
14. lsattr /mnt/f2fs/file

-----------------N- /mnt/f2fs/file

But actually, we expect the corrct result is:

-------A---------N- /mnt/f2fs/file

The reason is in step 9) we missed to recover cold bit flag in inode
block, so later, in fsync, we will skip write inode block due to below
condition check, result in lossing data in another SPOR.

f2fs_fsync_node_pages()
if (!IS_DNODE(page) || !is_cold_node(page))
continue;

Note that, I guess that some non-dir inode has already lost cold bit
during POR, so in order to reenable recovery for those inode, let's
try to recover cold bit in f2fs_iget() to save more fsynced data.

Fixes: c56675750d7c ("f2fs: remove unneeded set_cold_node()")
Cc: <stable@vger.kernel.org> 4.17+
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix missing up_read

commit 89d13c38501df730cbb2e02c4499da1b5187119d upstream.

This patch fixes missing up_read call.

Fixes: c9b60788fc76 ("f2fs: fix to do sanity check with block address in main area")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "f2fs: fix to clear PG_checked flag in set_page_dirty()"

commit 164a63fa6b384e30ceb96ed80bc7dc3379bc0960 upstream.

This reverts commit 66110abc4c931f879d70e83e1281f891699364bf.

If we clear the cold data flag out of the writeback flow, we can miscount
-1 by end_io, which incurs a deadlock caused by all I/Os being blocked during
heavy GC.

Balancing F2FS Async:
 - IO (CP:    1, Data:   -1, Flush: (   0    0    1), Discard: (   ...

GC thread:                              IRQ
- move_data_page()
 - set_page_dirty()
  - clear_cold_data()
                                        - f2fs_write_end_io()
                                         - type = WB_DATA_TYPE(page);
                                           here, we get wrong type
                                         - dec_page_count(sbi, type);
 - f2fs_wait_on_page_writeback()

Cc: <stable@vger.kernel.org>
Reported-and-Tested-by: Park Ju Hyung <qkrwngud825@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpupower: Fix AMD Family 0x17 msr_pstate size

[ Upstream commit 8c22e2f695920ebd94f9a53bcf2a65eb36d4dba1 ]

The msr_pstate data is only 63 bits long and should be 64 bits.

Add in the missing bit from res1 for AMD Family 0x17.

Reference: https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf, page 138.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Check the non-cached stream buffers more explicitly

[ Upstream commit 78c9be61c3a5cd9e2439fd27a5ffad73a81958c7 ]

Introduce a new flag, uc_buffer, to indicate that the controller
requires the non-cached pages for stream buffers, either as a
chip-specific requirement or specified via snoop=0 option.
This improves the code-readability.

Also, this patch fixes the incorrect behavior for C-Media chip where
the stream buffers were never handled as non-cached due to the check
of driver_type even if you pass snoop=0 option.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/rxe: fix for duplicate request processing and ack psns

[ Upstream commit b97db58557f4aa6d9903f8e1deea6b3d1ed0ba43 ]

Don't reset the resp opcode for a replayed read response.
The resp opcode could be in the middle of a write or send
sequence, when the duplicate read request was received.
An example sequence is as follows:
- Receive read request for 12KB PSN 20. Transmit read response
  first, middle and last with PSNs 20,21,22.
- Receive write first PSN 23.
  At this point the resp psn is 24 and resp opcode is write first.
- The sender notices that PSN 20 is dropped and retransmits.
  Receive read request for 12KB PSN 20. Transmit read response
  first, middle and last with PSNs 20,21,22. The resp opcode is
  set to -1, the resp psn remains 24.
- Receive write first PSN 23. This is processed by duplicate_request().
  The resp opcode remains -1 and resp psn remains 24.
- Receive write middle PSN 24. check_op_seq() reports a missing
  first error since the resp opcode is -1.

When sending an ack for a duplicate send or write request,
use the psn of the previous ack sent. Do not use the psn
of a read response for the ack.
An example sequence is as follows:
- Receive write PSN 30. Transmit ACK for PSN 30.
- Receive read request 4KB PSN 31. Transmit read response with
  PSN 31. The resp psn is now 32.
- The sender notices that PSN 30 is dropped and retransmits.
  Receive write PSN 30. duplicate_request() sends an ACK with
  PSN 31. That is incorrect since PSN 31 was a read request.

Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: dma-jz4780: Return error if not probed from DT

[ Upstream commit 54f919a04cf221bc1601d1193682d4379dacacbd ]

The driver calls clk_get() with the clock name set to NULL, which means
that the driver could only work when probed from devicetree. From now
on, we explicitly require the driver to be probed from devicetree.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: menelaus: Fix possible race condition and leak

[ Upstream commit 9612f8f503804d2fd2f63aa6ba1e58bba4612d96 ]

The IRQ work is added before the struct rtc is allocated and registered,
but this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.

Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before calling menelaus_add_irq_work.

Also, this solves a possible leak as the RTC is never released.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to flush all dirty inodes recovered in readonly fs

[ Upstream commit 1378752b9921e60749eaf18ec6c47b33f9001abb ]

generic/417 reported as blow:

------------[ cut here ]------------
kernel BUG at /home/yuchao/git/devf2fs/inode.c:695!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 21697 Comm: umount Tainted: G        W  O      4.18.0-rc2+ #39
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
EIP: f2fs_evict_inode+0x556/0x580 [f2fs]
Call Trace:
 ? _raw_spin_unlock+0x2c/0x50
 evict+0xa8/0x170
 dispose_list+0x34/0x40
 evict_inodes+0x118/0x120
 generic_shutdown_super+0x41/0x100
 ? rcu_read_lock_sched_held+0x97/0xa0
 kill_block_super+0x22/0x50
 kill_f2fs_super+0x6f/0x80 [f2fs]
 deactivate_locked_super+0x3d/0x70
 deactivate_super+0x40/0x60
 cleanup_mnt+0x39/0x70
 __cleanup_mnt+0x10/0x20
 task_work_run+0x81/0xa0
 exit_to_usermode_loop+0x59/0xa7
 do_fast_syscall_32+0x1f5/0x22c
 entry_SYSENTER_32+0x53/0x86
EIP: f2fs_evict_inode+0x556/0x580 [f2fs]

It can simply reproduced with scripts:

Enable quota feature during mkfs.

Testcase1:
1. mkfs.f2fs /dev/zram0
2. mount -t f2fs /dev/zram0 /mnt/f2fs
3. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4k" -c "fsync"
4. godown /mnt/f2fs
5. umount /mnt/f2fs
6. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs
7. umount /mnt/f2fs

Testcase2:
1. mkfs.f2fs /dev/zram0
2. mount -t f2fs /dev/zram0 /mnt/f2fs
3. touch /mnt/f2fs/file
4. create process[pid = x] do:
a) open /mnt/f2fs/file;
b) unlink /mnt/f2fs/file
5. godown -f /mnt/f2fs
6. kill process[pid = x]
7. umount /mnt/f2fs
8. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs
9. umount /mnt/f2fs

The reason is: during recovery, i_{c,m}time of inode will be updated, then
the inode can be set dirty w/o being tracked in sbi->inode_list[DIRTY_META]
global list, so later write_checkpoint will not flush such dirty inode into
node page.

Once umount is called, sync_filesystem() in generic_shutdown_super() will
skip syncng dirty inodes due to sb_rdonly check, leaving dirty inodes
there.

To solve this issue, during umount, add remove SB_RDONLY flag in
sb->s_flags, to make sure sync_filesystem() will not be skipped.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal: Always deliver the kernel's SIGKILL and SIGSTOP to a pid namespace init

[ Upstream commit 3597dfe01d12f570bc739da67f857fd222a3ea66 ]

Instead of playing whack-a-mole and changing SEND_SIG_PRIV to
SEND_SIG_FORCED throughout the kernel to ensure a pid namespace init
gets signals sent by the kernel, stop allowing a pid namespace init to
ignore SIGKILL or SIGSTOP sent by the kernel.  A pid namespace init is
only supposed to be able to ignore signals sent from itself and
children with SIG_DFL.

Fixes: 921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: report error if quota off error during umount

[ Upstream commit cda9cc595f0bb6ffa51a4efc4b6533dfa4039b4c ]

Now, we depend on fsck to ensure quota file data is ok,
so we scan whole partition if checkpoint without umount
flag. It's same for quota off error case, which may make
quota file data inconsistent.

generic/019 reports below error:

 __quota_error: 1160 callbacks suppressed
 Quota error (device zram1): write_blk: dquota write failed
 Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
 Quota error (device zram1): write_blk: dquota write failed
 Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
 Quota error (device zram1): write_blk: dquota write failed
 Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
 Quota error (device zram1): write_blk: dquota write failed
 Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
 Quota error (device zram1): write_blk: dquota write failed
 Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
 VFS: Busy inodes after unmount of zram1. Self-destruct in 5 seconds.  Have a nice day...

If we failed in below path due to fail to write dquot block, we will miss
to release quota inode, fix it.

- f2fs_put_super
 - f2fs_quota_off_umount
  - f2fs_quota_off
   - f2fs_quota_sync   <-- failed
   - dquot_quota_off   <-- missed to call

Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: avoid sleeping under spin_lock

[ Upstream commit b430f7263673eab1dc40e662ae3441a9619d16b8 ]

In the call trace below, we might sleep in function dput().

So in order to avoid sleeping under spin_lock, we remove f2fs_mark_inode_dirty_sync
from __try_update_largest_extent && __drop_largest_extent.

BUG: sleeping function called from invalid context at fs/dcache.c:796
Call trace:
dump_backtrace+0x0/0x3f4
show_stack+0x24/0x30
dump_stack+0xe0/0x138
___might_sleep+0x2a8/0x2c8
__might_sleep+0x78/0x10c
dput+0x7c/0x750
block_dump___mark_inode_dirty+0x120/0x17c
__mark_inode_dirty+0x344/0x11f0
f2fs_mark_inode_dirty_sync+0x40/0x50
__insert_extent_tree+0x2e0/0x2f4
f2fs_update_extent_tree_range+0xcf4/0xde8
f2fs_update_extent_cache+0x114/0x12c
f2fs_update_data_blkaddr+0x40/0x50
write_data_page+0x150/0x314
do_write_data_page+0x648/0x2318
__write_data_page+0xdb4/0x1640
f2fs_write_cache_pages+0x768/0xafc
__f2fs_write_data_pages+0x590/0x1218
f2fs_write_data_pages+0x64/0x74
do_writepages+0x74/0xe4
__writeback_single_inode+0xdc/0x15f0
writeback_sb_inodes+0x574/0xc98
__writeback_inodes_wb+0x190/0x204
wb_writeback+0x730/0xf14
wb_check_old_data_flush+0x1bc/0x1c8
wb_workfn+0x554/0xf74
process_one_work+0x440/0x118c
worker_thread+0xac/0x974
kthread+0x1a0/0x1c8
ret_from_fork+0x10/0x1c

Signed-off-by: Zhikang Zhang <zhangzhikang1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Correct race with abort on completion path

[ Upstream commit ca7fb76e091f889cfda1287c07a9358f73832b39 ]

On io completion, the driver is taking an adapter wide lock and nulling the
scsi command back pointer.  The nulling of the back pointer is to signify the
io was completed and the scsi_done() routine was called.  However, the routine
makes no check to see if the abort routine had done the same thing and
possibly nulled the pointer. Thus it may doubly-complete the io.

Make the following mods:

- Check to make sure forward progress (call scsi_done()) only happens if the
  command pointer was non-null.

- As the taking of the lock, which is adapter wide, is very costly on a system
  under load, null the pointer using an xchg operation rather than under lock.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Correct soft lockup when running mds diagnostics

[ Upstream commit 0ef01a2d95fd62bb4f536e7ce4d5e8e74b97a244 ]

When running an mds diagnostic that passes frames with the switch, soft
lockups are detected. The driver is in a CQE processing loop and has
sufficient amount of traffic that it never exits the ring processing routine,
thus the "lockup".

Cap the number of elements in the work processing routine to 64 elements. This
ensures that the cpu will be given up and the handler reschedule to process
additional items.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uio: ensure class is registered before devices

[ Upstream commit ae61cf5b9913027c6953a79ed3894da4f47061bd ]

When both uio and the uio drivers are built in the kernel, it is possible
for a driver to register devices before the uio class is registered.

This may result in a NULL pointer dereference later on in
get_device_parent() when accessing the class glue_dirs spinlock.

The trace looks like that:

Unable to handle kernel NULL pointer dereference at virtual address 00000140
[...]
[<ffff0000089cc234>] _raw_spin_lock+0x14/0x48
[<ffff0000084f56bc>] device_add+0x154/0x6a0
[<ffff0000084f5e48>] device_create_groups_vargs+0x120/0x128
[<ffff0000084f5edc>] device_create+0x54/0x60
[<ffff0000086e72c0>] __uio_register_device+0x120/0x4a8
[<ffff000008528b7c>] jaguar2_pci_probe+0x2d4/0x558
[<ffff0000083fc18c>] local_pci_probe+0x3c/0xb8
[<ffff0000083fd81c>] pci_device_probe+0x11c/0x180
[<ffff0000084f88bc>] driver_probe_device+0x22c/0x2d8
[<ffff0000084f8a24>] __driver_attach+0xbc/0xc0
[<ffff0000084f69fc>] bus_for_each_dev+0x4c/0x98
[<ffff0000084f81b8>] driver_attach+0x20/0x28
[<ffff0000084f7d08>] bus_add_driver+0x1b8/0x228
[<ffff0000084f93c0>] driver_register+0x60/0xf8
[<ffff0000083fb918>] __pci_register_driver+0x40/0x48

Return EPROBE_DEFER in that case so the driver can register the device
later.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Allow transition of DCI QP to reset

[ Upstream commit 99ed748e878a99c6c7b87bbec063eefd9e47cb42 ]

The transition is allowed from any state and the atrribute mask must be
IB_QP_STATE.

Fixes: c32a4f296e1d ("IB/mlx5: Add support for DC Initiator QP")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ipoib: Use dev_port to expose network interface port numbers

[ Upstream commit 9b8b2a323008aedd39a8debb861b825707f01420 ]

Some InfiniBand network devices have multiple ports on the same PCI
function. This initializes the `dev_port' sysfs field of those
network interfaces with their port number.

Prior to this the kernel erroneously used the `dev_id' sysfs
field of those network interfaces to convey the port number to userspace.

The use of `dev_id' was considered correct until Linux 3.15,
when another field, `dev_port', was defined for this particular
purpose and `dev_id' was reserved for distinguishing stacked ifaces
(e.g: VLANs) with the same hardware address as their parent device.

Similar fixes to net/mlx4_en and many other drivers, which started
exporting this information through `dev_id' before 3.15, were accepted
into the kernel 4 years ago.
See 76a066f2a2a0 (`net/mlx4_en: Expose port number through sysfs').

Signed-off-by: Arseny Maslennikov <ar@cs.msu.ru>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: coreboot: Unmap ioregion after device population

[ Upstream commit 20edec388277b62ddfddb8b2b376a937a2cd6d1b ]

Both callers of coreboot_table_init() ioremap the pointer that comes in
but they don't unmap the memory on failure. Both of them also fail probe
immediately with the return value of coreboot_table_init(), leaking a
mapping when it fails. The mapping isn't necessary at all after devices
are populated either, so we can just drop the mapping here when we exit
the function. Let's do that to simplify the code a bit and plug the leak.

Cc: Wei-Ning Huang <wnhuang@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Fixes: 570d30c2823f ("firmware: coreboot: Expose the coreboot table as a bus")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: AMD: Fix capture unstable in beginning for some runs

[ Upstream commit c50535ed6a10fcae1b64ae83c0f6b1eeb5535afc ]

alsa_conformance_test -C hw:0,4 -p 1024 --debug
would sometime show:
TIME_DIFF(s)    HW_LEVEL       READ              RATE
0.000095970         1024       1024    10670001.041992
0.042609555         1024       2048       24032.168372
0.021330364         1024       3072       48006.681930
0.021339559         1024       4096       47985.996337
The issue is that in dma pointer function we can have stale value
of the register for current descriptor of channel.
The register retains the number of the last descriptor that
was transferred.

Fix ensures that we report position, 0, till the one period worth of
data is transferred.  After one period of data, in handler of period
completion interrupt we update the config and correct value of descriptor
starts reflecting.

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver/dma/ioat: Call del_timer_sync() without holding prep_lock

[ Upstream commit cfb03be6c7e8a1591285849c361d67b09f5149f7 ]

The following lockdep splat was observed:

[ 1222.241750] ======================================================
[ 1222.271301] WARNING: possible circular locking dependency detected
[ 1222.301060] 4.16.0-10.el8+5.x86_64+debug #1 Not tainted
[ 1222.326659] ------------------------------------------------------
[ 1222.356565] systemd-shutdow/1 is trying to acquire lock:
[ 1222.382660]  ((&ioat_chan->timer)){+.-.}, at: [<00000000f71e1a28>] del_timer_sync+0x5/0xf0
[ 1222.422928]
[ 1222.422928] but task is already holding lock:
[ 1222.451743]  (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma]
   :
[ 1223.524987] Chain exists of:
[ 1223.524987]   (&ioat_chan->timer) --> &(&ioat_chan->cleanup_lock)->rlock --> &(&ioat_chan->prep_lock)->rlock
[ 1223.524987]
[ 1223.594082]  Possible unsafe locking scenario:
[ 1223.594082]
[ 1223.622630]        CPU0                    CPU1
[ 1223.645080]        ----                    ----
[ 1223.667404]   lock(&(&ioat_chan->prep_lock)->rlock);
[ 1223.691535]                                lock(&(&ioat_chan->cleanup_lock)->rlock);
[ 1223.728657]                                lock(&(&ioat_chan->prep_lock)->rlock);
[ 1223.765122]   lock((&ioat_chan->timer));
[ 1223.784095]
[ 1223.784095]  *** DEADLOCK ***
[ 1223.784095]
[ 1223.813492] 4 locks held by systemd-shutdow/1:
[ 1223.834677]  #0:  (reboot_mutex){+.+.}, at: [<0000000056d33456>] SYSC_reboot+0x10f/0x300
[ 1223.873310]  #1:  (&dev->mutex){....}, at: [<00000000258dfdd7>] device_shutdown+0x1c8/0x660
[ 1223.913604]  #2:  (&dev->mutex){....}, at: [<0000000068331147>] device_shutdown+0x1d6/0x660
[ 1223.954000]  #3:  (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma]

In the ioat_shutdown() function:

spin_lock_bh(&ioat_chan->prep_lock);
set_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
del_timer_sync(&ioat_chan->timer);
spin_unlock_bh(&ioat_chan->prep_lock);

According to the synchronization rule for the del_timer_sync() function,
the caller must not hold locks which would prevent completion of the
timer's handler.

The timer structure has its own lock that manages its synchronization.
Setting the IOAT_CHAN_DOWN bit should prevent other CPUs from
trying to use that device anyway, there is probably no need to call
del_timer_sync() while holding the prep_lock. So the del_timer_sync()
call is now moved outside of the prep_lock critical section to prevent
the circular lock dependency.

Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Smack: ptrace capability use fixes

[ Upstream commit dcb569cf6ac99ca899b8109c128b6ae52477a015 ]

This fixes a pair of problems in the Smack ptrace checks
related to checking capabilities. In both cases, as reported
by Lukasz Pawelczyk, the raw capability calls are used rather
than the Smack wrapper that check addition restrictions.
In one case, as reported by Jann Horn, the wrong task is being
checked for capabilities.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: Prevent unbalanced IRQ disable

[ Upstream commit 8b97d73c4d72a2abf58f8e49062a7ee1e5f1334e ]

The ChipIdea IRQ is disabled before scheduling the otg work and
re-enabled on otg work completion. However if the job is already
scheduled we have to undo the effect of disable_irq int order to
balance the IRQ disable-depth value.

Fixes: be6b0c1bd0be ("usb: chipidea: using one inline function to cover queue work operations")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: caam - fix implicit casts in endianness helpers

[ Upstream commit aae733a3f46f5ef338fbdde26e14cbb205a23de0 ]

Fix the following sparse endianness warnings:

drivers/crypto/caam/regs.h:95:1: sparse: incorrect type in return expression (different base types) @@    expected unsigned int @@    got restricted __le32unsigned int @@
drivers/crypto/caam/regs.h:95:1:    expected unsigned int
drivers/crypto/caam/regs.h:95:1:    got restricted __le32 [usertype] <noident>
drivers/crypto/caam/regs.h:95:1: sparse: incorrect type in return expression (different base types) @@    expected unsigned int @@    got restricted __be32unsigned int @@
drivers/crypto/caam/regs.h:95:1:    expected unsigned int
drivers/crypto/caam/regs.h:95:1:    got restricted __be32 [usertype] <noident>

drivers/crypto/caam/regs.h:92:1: sparse: cast to restricted __le32
drivers/crypto/caam/regs.h:92:1: sparse: cast to restricted __be32

Fixes: 261ea058f016 ("crypto: caam - handle core endianness != caam endianness")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: dwc: pci-dra7xx: Enable errata i870 for both EP and RC mode

[ Upstream commit 726d75a6d243bf6730da3216f3592503f6f0f588 ]

Errata i870 is applicable in both EP and RC mode. Therefore rename
function dra7xx_pcie_ep_unaligned_memaccess(), that implements errata
workaround, to dra7xx_pcie_unaligned_memaccess() and call it for both RC
and EP. Make sure driver probe does not fail in case the workaround is not
applied for RC mode in order to maintain DT backward compatibility.

Reported-by: Chris Welch <Chris.Welch@viavisolutions.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
[lorenzo.pieralisi@arm.com: reworded the log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: etb10: Fix handling of perf mode

[ Upstream commit 987d1e8dcd370d96029a3d76a0031b043c4a69ae ]

If the ETB is already enabled in sysfs mode, the ETB reports
success even if a perf mode is requested. Fix this by checking
the requested mode.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/MSI: Warn and return error if driver enables MSI/MSI-X twice

[ Upstream commit 4c1ef72e9b71a19fb405ebfcd37c0a5e16fa44ca ]

It is a serious driver defect to enable MSI or MSI-X more than once.  Doing
so may panic the kernel as in the stack trace below:

  Call Trace:
    sysfs_add_one+0xa5/0xd0
    create_dir+0x7c/0xe0
    sysfs_create_subdir+0x1c/0x20
    internal_create_group+0x6d/0x290
    sysfs_create_groups+0x4a/0xa0
    populate_msi_sysfs+0x1cd/0x210
    pci_enable_msix+0x31c/0x3e0
    igbuio_pci_open+0x72/0x300 [igb_uio]
    uio_open+0xcc/0x120 [uio]
    chrdev_open+0xa1/0x1e0
    [...]
    do_sys_open+0xf3/0x1f0
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
    ---[ end trace 11042e2848880209 ]---
    Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa056b4fa

We want to keep the WARN_ON() and stack trace so the driver can be fixed,
but we can avoid the kernel panic by returning an error.  We may still get
warnings like this:

  Call Trace:
    pci_enable_msix+0x3c9/0x3e0
    igbuio_pci_open+0x72/0x300 [igb_uio]
    uio_open+0xcc/0x120 [uio]
    chrdev_open+0xa1/0x1e0
    [...]
    do_sys_open+0xf3/0x1f0
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
    ------------[ cut here ]------------
    WARNING: at fs/sysfs/dir.c:526 sysfs_add_one+0xa5/0xd0()
    sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/0000:01:00.1/msi_irqs'

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
[bhelgaas: changelog, fix patch whitespace, remove !!]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to recover inode's i_flags during POR

[ Upstream commit 19c73a691ccf6fb2f12d4e9cf9830023966cec88 ]

Testcase to reproduce this bug:
1. mkfs.f2fs /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr +A /mnt/f2fs/file
6. xfs_io -f /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. lsattr /mnt/f2fs/file

-----------------N- /mnt/f2fs/file

But actually, we expect the corrct result is:

-------A---------N- /mnt/f2fs/file

The reason is we didn't recover inode.i_flags field during mount,
fix it.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to recover inode's crtime during POR

[ Upstream commit 5cd1f387a13b5188b4edb4c834310302a85a6ea2 ]

Testcase to reproduce this bug:
1. mkfs.f2fs -O extra_attr -O inode_crtime /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. xfs_io -f /mnt/f2fs/file -c "fsync"
5. godown /mnt/f2fs
6. umount /mnt/f2fs
7. mount -t f2fs /dev/sdd /mnt/f2fs
8. xfs_io -f /mnt/f2fs/file -c "statx -r"

stat.btime.tv_sec = 0
stat.btime.tv_nsec = 0

This patch fixes to recover inode creation time fields during
mount.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix recursive mailbox timeout

[ Upstream commit 710bc78f829d014eca95ed7ccc4052bc064b1320 ]

This patch prevents user space mailbox request from doing chip reset if the
mailbox timed out. The chip reset is only reserved for the DPC thread to
ensure all mailbox requests are flushed properly. The DPC thread is
responsible for the flushing all MBs and chip reset.

Fixes: b2000805a975 ("scsi: qla2xxx: Flush mailbox commands on chip reset")
Cc: <stable@ger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Avoid USB autosuspend when resuming USB2 ports.

[ Upstream commit 330e2d61cdd58363eb5e66b2e72f76fe3c5492e0 ]

When USB bus host controller root hub resumes from autosuspend,
it immediately tries to enter auto-suspend, but there can be a
scenario when root hub is resuming its usb2 ports, in that particular
case USB host controller auto suspend fails since it is busy
to resuming its usb2 ports.

This makes multiple failed cycles of auto-suspend until all usb2
ports of host controller root hub do not resume.

This patch uses USB core framework usb_hcd_start_port_resume,
usb_hcd_end_port_resume API's in order to  autoresume/autosuspend
root hub properly.

Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: check the return value of nvmem_add_cells()

[ Upstream commit fa72d847d68d7833b77a4bef944cf2c5baf56f49 ]

This function can fail so check its return value in nvmem_register()
and act accordingly.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: cadence: Correct probe behaviour when failing to get PHY

[ Upstream commit aa77e55d48124d0d78456eabf872fffb5decdbe1 ]

Test the correct value to see whether the PHY get failed.

Use devm_phy_get() instead of devm_phy_optional_get(), since it is
only called if phy name is given in devicetree and so should exist.
If failure when getting or linking PHY, put any PHYs which were
already got and unlink them.

Fixes: dfb80534692ddc5b ("PCI: cadence: Add generic PHY support to host and EP drivers")
Reported-by: Colin King <colin.king@canonical.com>
Signed-off-by: Alan Douglas <adouglas@cadence.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MD: fix invalid stored role for a disk

[ Upstream commit d595567dc4f0c1d90685ec1e2e296e2cad2643ac ]

If we change the number of array's device after device is removed from array,
then add the device back to array, we can see that device is added as active
role instead of spare which we expected.

Please see the below link for details:
https://marc.info/?l=linux-raid&m=153736982015076&w=2

This is caused by that we prefer to use device's previous role which is
recorded by saved_raid_disk, but we should respect the new number of
conf->raid_disks since it could be changed after device is removed.

Reported-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Tested-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Acked-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix argument checking in EXT4_IOC_MOVE_EXT

[ Upstream commit f18b2b83a727a3db208308057d2c7945f368e625 ]

If the starting block number of either the source or destination file
exceeds the EOF, EXT4_IOC_MOVE_EXT should return EINVAL.

Also fixed the helper function mext_check_coverage() so that if the
logical block is beyond EOF, make it return immediately, instead of
looping until the block number wraps all the away around.  This takes
long enough that if there are multiple threads trying to do pound on
an the same inode doing non-sensical things, it can end up triggering
the kernel's soft lockup detector.

Reported-by: syzbot+c61979f6f2cba5cb3c06@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: atmel: handle at91sam9rl PMC

[ Upstream commit bb80e4fa57eb75ebd64ae9be4155da6d12c1a997 ]

The at91sam9rl PMC is not quite the same as the at91sam9g45 one and now has
its own compatible string. Add support for that.

Fixes: 217bace8e548 ("ARM: dts: fix PMC compatible")
Acked-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: fix a race with external vbus supply

[ Upstream commit 41ee1ea21052583eaf5487dfa0d0c907c9667548 ]

There's a race with root hub resume, when using external vbus supply.
Root hub gets resumed, but runtime pm autosuspend runs as external vbus
supply isn't enabled. So, host never exit from power down properly.
Initialize vbus external supply before, rater that after hub resume.

Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external
vbus supply")

Tested-by: Artur Petrosyan <arturp@synopsys.com>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: fix call to vbus supply exit routine, call it unlocked

[ Upstream commit 5aa678c7fd5371769efde30763fb43a43a118cd0 ]

dwc2_vbus_supply_exit() may call regulator_disable(). It shouldn't be
called with interrupts disabled as it might sleep.
This is seen with DEBUG_ATOMIC_SLEEP=y.

Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external
vbus supply")

Tested-by: Artur Petrosyan <arturp@synopsys.com>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/pdc: Setup all edge interrupts as rising edge at GIC

[ Upstream commit 7bae48b22c8d38c5cd50f52b6e15d134e2bb3935 ]

The PDC irqchp can convert a falling edge or level low interrupt to a
rising edge or level high interrupt at the GIC. We just need to setup
the GIC correctly. Set up the interrupt type for the IRQ_TYPE_EDGE_BOTH
as IRQ_TYPE_EDGE_RISING at the GIC.

Fixes: f55c73aef890 ("irqchip/pdc: Add PDC interrupt controller for QCOM SoCs")
Reported-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xprtrdma: Reset credit grant properly after a disconnect

[ Upstream commit ef739b2175dde9c05594f768cb78149f1ce2ac36 ]

On a fresh connection, an RPC/RDMA client is supposed to send only
one RPC Call until it gets a credit grant in the first RPC Reply
from the server [RFC 8166, Section 3.3.3].

There is a bug in the Linux client's credit accounting mechanism
introduced by commit e7ce710a8802 ("xprtrdma: Avoid deadlock when
credit window is reset"). On connect, it simply dumps all pending
RPC Calls onto the new connection.

Servers have been tolerant of this bad behavior. Currently no server
implementation ever changes its credit grant over reconnects, and
servers always repost enough Receives before connections are fully
established.

To correct this issue, ensure that the client resets both the credit
grant _and_ the congestion window when handling a reconnect.

Fixes: e7ce710a8802 ("xprtrdma: Avoid deadlock when credit ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI / ACPI: Enable wake automatically for power managed bridges

[ Upstream commit 6299cf9ec3985cac70bede8a855b5087b81a6640 ]

We enable power management automatically for bridges where
pci_bridge_d3_possible() returns true. However, these bridges may have
ACPI methods such as _DSW that need to be called before D3 entry. For
example in Lenovo Thinkpad X1 Carbon 6th _DSW method is used to prepare
D3cold for the PCIe root port hosting Thunderbolt chain. Because wake is
not enabled _DSW method is never called and the port does not enter
D3cold properly consuming more power than necessary.

Users can work this around by writing "enabled" to "wakeup" sysfs file
under the device in question but that is not something an ordinary user
is expected to do.

Since we already automatically enable power management for PCIe ports
with ->bridge_d3 set extend that to enable wake for them as well,
assuming the port has any ACPI wakeup related objects implemented in the
namespace (adev->wakeup.flags.valid is true). This ensures the necessary
ACPI methods get called at appropriate times and allows the root port in
Thinkpad X1 Carbon 6th to go into D3cold.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VMCI: Resource wildcard match fixed

[ Upstream commit 11924ba5e671d6caef1516923e2bd8c72929a3fe ]

When adding a VMCI resource, the check for an existing entry
would ignore that the new entry could be a wildcard. This could
result in multiple resource entries that would match a given
handle. One disastrous outcome of this is that the
refcounting used to ensure that delayed callbacks for VMCI
datagrams have run before the datagram is destroyed can be
wrong, since the refcount could be increased on the duplicate
entry. This in turn leads to a use after free bug. This issue
was discovered by Hangbin Liu using KASAN and syzkaller.

Fixes: bc63dedb7d46 ("VMCI: resource object implementation")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: Use cpumask_var_t for on-stack cpu mask

[ Upstream commit 25355252607ca288f329ee033f387764883393f6 ]

A cpumask structure on the stack can cause a warning with
CONFIG_NR_CPUS=8192 (e.g. Ubuntu 16.04 and 18.04 use this):

drivers/hv//channel_mgmt.c: In function ‘init_vp_index’:
drivers/hv//channel_mgmt.c:702:1: warning: the frame size of 1032 bytes
  is larger than 1024 bytes [-Wframe-larger-than=]

Nowadays it looks most distros enable CONFIG_CPUMASK_OFFSTACK=y, and
hence we can work around the warning by using cpumask_var_t.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: clear PageError on the read path

[ Upstream commit fb7d70db305a1446864227abf711b756568f8242 ]

When running fault injection test, I hit somewhat wrong behavior in f2fs_gc ->
gc_data_segment():

0. fault injection generated some PageError'ed pages

1. gc_data_segment
 -> f2fs_get_read_data_page(REQ_RAHEAD)

2. move_data_page
 -> f2fs_get_lock_data_page()
  -> f2f_get_read_data_page()
   -> f2fs_submit_page_read()
    -> submit_bio(READ)
  -> return EIO due to PageError
  -> fail to move data

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated

[ Upstream commit 0d6d0d62d9505a9816716aa484ebd0b04c795063 ]

For TPM 1.2 chips the system setup utility allows to set the TPM device in
one of the following states:

  * Active: Security chip is functional
  * Inactive: Security chip is visible, but is not functional
  * Disabled: Security chip is hidden and is not functional

When choosing the "Inactive" state, the TPM 1.2 device is enumerated and
registered, but sending TPM commands fail with either TPM_DEACTIVATED or
TPM_DISABLED depending if the firmware deactivated or disabled the TPM.

Since these TPM 1.2 error codes don't have special treatment, inactivating
the TPM leads to a very noisy kernel log buffer that shows messages like
the following:

  tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
  tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
  tpm tpm0: TPM is disabled/deactivated (0x6)
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
  ima: No TPM chip found, activating TPM-bypass! (rc=6)
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random
  tpm tpm0: A TPM error (6) occurred attempting get random

Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED}
return codes, since this is expected when the TPM 1.2 is set to Inactive.

In that case the kernel log is cleaner and less confusing for users, i.e:

  tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
  tpm tpm0: TPM is disabled/deactivated (0x6)
  ima: No TPM chip found, activating TPM-bypass! (rc=6)

Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: Report back negotiated PPS voltage and current

[ Upstream commit 554fab6dbf20ee7298ed2d4e8398b85e6058abb7 ]

Currently when requesting a specific voltage or current through
the psy interface, for PPS, when reading back from that interface
the values will always be the same as previously given, if the
request was successful. However PPS only allows for 20mV voltage
steps and 50mA current steps, and the psy class expects microvolt
and micro amp requests, so inbetween values can be provided through
this interface. Really when reading back the true values negotiated
should be given, and not the ones originally asked for.

To report the actual values negotiated with the Source, the values
stored are now rounded down to the relevant step units prior to
building the PPS request, so that those values are later correctly
reported through the psy interface. In addition this improves the
adjustments made to meet the operating power requirements of the
platform, which previously could have been slightly out due to not
using valid PPS units of voltage and current.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: cadence: Use AXI region 0 to signal interrupts from EP

[ Upstream commit 0652d4b6b56f73c81abbdbc7e26f772cb2dfe370 ]

The IRQ physical address is allocated from region 0, rather than
the highest region. Update the driver to reserve this region in
the bitmap and to use region 0 for all types of interrupt.

This corrects a problem which prevents the interrupt being
signalled correctly if using the first address in the AXI region,
since an offset of zero will always be mapped to region 0.

Fixes: 37dddf14f1ae ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller")
Signed-off-by: Alan Douglas <adouglas@cadence.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: mediatek: Fix mtk_pcie_find_port() endpoint/port matching logic

[ Upstream commit 074d6f32689ce05a084b6fa3db38445745bf11cc ]

The Mediatek's host controller has two slots, each with its own control
registers. The host driver needs to identify what slot is connected to
what port in order to access the device's configuration space.

Current code retrieving slot connected to a given endpoint device.

Assuming each slot is connected to one endpoint device as below:

                host bridge
  bus 0 --> __________|_______
           |                  |
           |                  |
         slot 0             slot 1
  bus 1 -->|        bus 2 --> |
           |                  |
         EP 0               EP 1

During PCI enumeration, system software will scan all the PCI devices on
every bus starting from devfn 0. Using PCI_SLOT(devfn) for matching an
endpoint to its slot is erroneous in that the devfn does not contain the
hierarchical bus numbering in it. In order to match an endpoint with its
slot (and related port), the PCI tree must be walked up to the root bus
(where the root ports are situated) and then the PCI_SLOT(devfn)
matching logic can be correctly applied for matching.

This patch fixes the mtk_pcie_find_port() slot matching logic by adding
appropriate PCI tree walking code to retrieve the slot/port a given
endpoint is connected to.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ohci-at91: fix request of irq for optional gpio

[ Upstream commit 325b9313ec3be56c8e2fe03f977fee19cec75820 ]

atmel,oc-gpio is optional. Request its irq only when atmel,oc is set
in device tree.

devm_gpiod_get_index_optional returns NULL if -ENOENT. Check its
return value for NULL before error, because it is more probable that
atmel,oc is not set.

This fixes the following errors on boards where atmel,oc is not set in
device tree:
[    0.960000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ
[    0.960000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ
[    0.970000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/bnxt_re: Fix recursive lock warning in debug kernel

[ Upstream commit d455f29f6d76a5f94881ca1289aaa1e90617ff5d ]

Fix possible recursive lock warning. Its a false warning as the locks are
part of two differnt HW Queue data structure - cmdq and creq. Debug kernel
is throwing the following warning and stack trace.

[  783.914967] ============================================
[  783.914970] WARNING: possible recursive locking detected
[  783.914973] 4.19.0-rc2+ #33 Not tainted
[  783.914976] --------------------------------------------
[  783.914979] swapper/2/0 is trying to acquire lock:
[  783.914982] 000000002aa3949d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.914999]
but task is already holding lock:
[  783.915002] 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re]
[  783.915013]
other info that might help us debug this:
[  783.915016]  Possible unsafe locking scenario:

[  783.915019]        CPU0
[  783.915021]        ----
[  783.915034]   lock(&(&hwq->lock)->rlock);
[  783.915035]   lock(&(&hwq->lock)->rlock);
[  783.915037]
 *** DEADLOCK ***

[  783.915038]  May be due to missing lock nesting notation

[  783.915039] 1 lock held by swapper/2/0:
[  783.915040]  #0: 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re]
[  783.915044]
stack backtrace:
[  783.915046] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.0-rc2+ #33
[  783.915047] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014
[  783.915048] Call Trace:
[  783.915049]  <IRQ>
[  783.915054]  dump_stack+0x90/0xe3
[  783.915058]  __lock_acquire+0x106c/0x1080
[  783.915061]  ? sched_clock+0x5/0x10
[  783.915063]  lock_acquire+0xbd/0x1a0
[  783.915065]  ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915069]  _raw_spin_lock_irqsave+0x4a/0x90
[  783.915071]  ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915073]  bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915078]  tasklet_action_common.isra.17+0x197/0x1b0
[  783.915081]  __do_softirq+0xcb/0x3a6
[  783.915084]  irq_exit+0xe9/0x100
[  783.915085]  do_IRQ+0x6a/0x120
[  783.915087]  common_interrupt+0xf/0xf
[  783.915088]  </IRQ>

Use nested notation for the spin_lock to avoid this warning.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/bnxt_re: Avoid accessing nq->bar_reg_iomem in failure case

[ Upstream commit ed51efd2ce44091a858ad829f666727e7c95695e ]

In the failure path, nq->bar_reg_iomem gets accessed without
initializing. Avoid this by calling the bnxt_qplib_nq_stop_irq only if the
initialization is complete.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ipoib: Clear IPCB before icmp_send

[ Upstream commit 4d6e4d12da2c308f8f976d3955c45ee62539ac98 ]

IPCB should be cleared before icmp_send, since it may contain data from
previous layers and the data could be misinterpreted as ip header options,
which later caused the ihl to be set to an invalid value and resulted in
the following stack corruption:

[ 1083.031512] ib0: packet len 57824 (> 2048) too long to send, dropping
[ 1083.031843] ib0: packet len 37904 (> 2048) too long to send, dropping
[ 1083.032004] ib0: packet len 4040 (> 2048) too long to send, dropping
[ 1083.032253] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.032481] ib0: packet len 23960 (> 2048) too long to send, dropping
[ 1083.033149] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033439] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033700] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034124] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034387] ==================================================================
[ 1083.034602] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xf08/0x1310
[ 1083.034798] Write of size 4 at addr ffff880353457c5f by task kworker/u16:0/7
[ 1083.034990]
[ 1083.035104] CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G           O      4.19.0-rc5+ #1
[ 1083.035316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 1083.035573] Workqueue: ipoib_wq ipoib_cm_skb_reap [ib_ipoib]
[ 1083.035750] Call Trace:
[ 1083.035888]  dump_stack+0x9a/0xeb
[ 1083.036031]  print_address_description+0xe3/0x2e0
[ 1083.036213]  kasan_report+0x18a/0x2e0
[ 1083.036356]  ? __ip_options_echo+0xf08/0x1310
[ 1083.036522]  __ip_options_echo+0xf08/0x1310
[ 1083.036688]  icmp_send+0x7b9/0x1cd0
[ 1083.036843]  ? icmp_route_lookup.constprop.9+0x1070/0x1070
[ 1083.037018]  ? netif_schedule_queue+0x5/0x200
[ 1083.037180]  ? debug_show_all_locks+0x310/0x310
[ 1083.037341]  ? rcu_dynticks_curr_cpu_in_eqs+0x85/0x120
[ 1083.037519]  ? debug_locks_off+0x11/0x80
[ 1083.037673]  ? debug_check_no_obj_freed+0x207/0x4c6
[ 1083.037841]  ? check_flags.part.27+0x450/0x450
[ 1083.037995]  ? debug_check_no_obj_freed+0xc3/0x4c6
[ 1083.038169]  ? debug_locks_off+0x11/0x80
[ 1083.038318]  ? skb_dequeue+0x10e/0x1a0
[ 1083.038476]  ? ipoib_cm_skb_reap+0x2b5/0x650 [ib_ipoib]
[ 1083.038642]  ? netif_schedule_queue+0xa8/0x200
[ 1083.038820]  ? ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.038996]  ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.039174]  process_one_work+0x912/0x1830
[ 1083.039336]  ? wq_pool_ids_show+0x310/0x310
[ 1083.039491]  ? lock_acquire+0x145/0x3a0
[ 1083.042312]  worker_thread+0x87/0xbb0
[ 1083.045099]  ? process_one_work+0x1830/0x1830
[ 1083.047865]  kthread+0x322/0x3e0
[ 1083.050624]  ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 1083.053354]  ret_from_fork+0x3a/0x50

For instance __ip_options_echo is failing to proceed with invalid srr and
optlen passed from another layer via IPCB

[  762.139568] IPv4: __ip_options_echo rr=0 ts=0 srr=43 cipso=0
[  762.139720] IPv4: ip_options_build: IPCB 00000000f3cd969e opt 000000002ccb3533
[  762.139838] IPv4: __ip_options_echo in srr: optlen 197 soffset 84
[  762.139852] IPv4: ip_options_build srr=0 is_frag=0 rr_needaddr=0 ts_needaddr=0 ts_needtime=0 rr=0 ts=0
[  762.140269] ==================================================================
[  762.140713] IPv4: __ip_options_echo rr=0 ts=0 srr=0 cipso=0
[  762.141078] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x12ec/0x1680
[  762.141087] Write of size 4 at addr ffff880353457c7f by task kworker/u16:0/7

Signed-off-by: Denis Drozdov <denisd@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/cm: Respect returned status of cm_init_av_by_path

[ Upstream commit e54b6a3bcd1ec972b25a164bdf495d9e7120b107 ]

Add missing check for failure of cm_init_av_by_path

Fixes: e1444b5a163e ("IB/cm: Fix automatic path migration support")
Reported-by: Slava Shwartsman <slavash@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/core: Do not expose unsupported counters

[ Upstream commit 0f6ef65d1c6ec8deb5d0f11f86631ec4cfe8f22e ]

If the provider driver (such as rdma_rxe) doesn't support pma counters,
avoid exposing its directory similar to optional hw_counters directory.
If core fails to read the PMA counter, return an error so that user can
retry later if needed.

Fixes: 35c4cbb17811 ("IB/core: Create get_perf_mad function in sysfs.c")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: megaraid_sas: fix a missing-check bug

[ Upstream commit 47db7873136a9c57c45390a53b57019cf73c8259 ]

In megasas_mgmt_compat_ioctl_fw(), to handle the structure
compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket
'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle
the packet. Since the two data structures have different fields, the data
is copied from 'cioc' to 'ioc' field by field. In the copy process,
'sense_ptr' is prepared if the field 'sense_len' is not null, because it
will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the
user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and
saved to kernel-space variables 'local_sense_off' and 'user_sense_off'
respectively. Given that 'ioc->sense_off' is also copied from
'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the
same value. However, 'cioc' is in the user space and a malicious user can
race to change the value of 'cioc->sense_off' after it is copied to
'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing
so, the attacker can inject different values into 'local_sense_off' and
'user_sense_off'. This can cause undefined behavior in the following
execution, because the two variables are supposed to be same.

This patch enforces a check on the two kernel variables 'local_sense_off'
and 'user_sense_off' to make sure they are the same after the copy. In
case they are not, an error code EINVAL will be returned.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Clear reserved bits of #DB exit qualification

[ Upstream commit cfb634fe3052aefc4e1360fa322018c9a0b49755 ]

According to volume 3 of the SDM, bits 63:15 and 12:4 of the exit
qualification field for debug exceptions are reserved (cleared to
0). However, the SDM is incorrect about bit 16 (corresponding to
DR6.RTM). This bit should be set if a debug exception (#DB) or a
breakpoint exception (#BP) occurred inside an RTM region while
advanced debugging of RTM transactional regions was enabled. Note that
this is the opposite of DR6.RTM, which "indicates (when clear) that a
debug exception (#DB) or breakpoint exception (#BP) occurred inside an
RTM region while advanced debugging of RTM transactional regions was
enabled."

There is still an issue with stale DR6 bits potentially being
misreported for the current debug exception.  DR6 should not have been
modified before vectoring the #DB exception, and the "new DR6 bits"
should be available somewhere, but it was and they aren't.

Fixes: b96fb439774e1 ("KVM: nVMX: fixes to nested virt interrupt injection")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UAPI: ndctl: Fix g++-unsupported initialisation in headers

[ Upstream commit 9607871f37dc3e717639694b8d0dc738f2a68efc ]

The following code in the linux/ndctl header file:

static inline const char *nvdimm_bus_cmd_name(unsigned cmd)
{
static const char * const names[] = {
[ND_CMD_ARS_CAP] = "ars_cap",
[ND_CMD_ARS_START] = "ars_start",
[ND_CMD_ARS_STATUS] = "ars_status",
[ND_CMD_CLEAR_ERROR] = "clear_error",
[ND_CMD_CALL] = "cmd_call",
};

if (cmd < ARRAY_SIZE(names) && names[cmd])
return names[cmd];
return "unknown";
}

is broken in a number of ways:

 (1) ARRAY_SIZE() is not generally defined.

 (2) g++ does not support "non-trivial" array initialisers fully yet.

 (3) Every file that calls this function will acquire a copy of names[].

The same goes for nvdimm_cmd_name().

Fix all three by converting to a switch statement where each case returns a
string.  That way if cmd is a constant, the compiler can trivially reduce it
and, if not, the compiler can use a shared lookup table if it thinks that is
more efficient.

A better way would be to remove these functions and their arrays from the
header entirely.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: Schedule clk gating work on correct queue

[ Upstream commit f4bb7704699beee9edfbee875daa9089c86cf724 ]

With commit 10e5e37581fc ("scsi: ufs: Add clock ungating to a separate
workqueue"), clock gating work was moved to a separate work queue with
WQ_MEM_RECLAIM set, since clock gating could occur from a memory reclaim
context. Unfortunately, clk_gating.gate_work was left queued via
schedule_delayed_work, which is a system workqueue that does not have
WQ_MEM_RECLAIM set.  Because ufshcd_ungate_work attempts to cancel
gate_work, the following warning appears:

[   14.174170] workqueue: WQ_MEM_RECLAIM ufs_clk_gating_0:ufshcd_ungate_work is flushing !WQ_MEM_RECLAIM events:ufshcd_gate_work
[   14.174179] WARNING: CPU: 4 PID: 173 at kernel/workqueue.c:2440 check_flush_dependency+0x110/0x118
[   14.205725] CPU: 4 PID: 173 Comm: kworker/u16:3 Not tainted 4.14.68 #1
[   14.212437] Hardware name: Google Cheza (rev1) (DT)
[   14.217459] Workqueue: ufs_clk_gating_0 ufshcd_ungate_work
[   14.223107] task: ffffffc0f6a40080 task.stack: ffffff800a490000
[   14.229195] PC is at check_flush_dependency+0x110/0x118
[   14.234569] LR is at check_flush_dependency+0x110/0x118
[   14.239944] pc : [<ffffff80080cad14>] lr : [<ffffff80080cad14>] pstate: 60c001c9
[   14.333050] Call trace:
[   14.427767] [<ffffff80080cad14>] check_flush_dependency+0x110/0x118
[   14.434219] [<ffffff80080cafec>] start_flush_work+0xac/0x1fc
[   14.440046] [<ffffff80080caeec>] flush_work+0x40/0x94
[   14.445246] [<ffffff80080cb288>] __cancel_work_timer+0x11c/0x1b8
[   14.451433] [<ffffff80080cb4b8>] cancel_delayed_work_sync+0x20/0x30
[   14.457886] [<ffffff80085b9294>] ufshcd_ungate_work+0x24/0xd0
[   14.463800] [<ffffff80080cfb04>] process_one_work+0x32c/0x690
[   14.469713] [<ffffff80080d0154>] worker_thread+0x218/0x338
[   14.475361] [<ffffff80080d527c>] kthread+0x120/0x130
[   14.480470] [<ffffff8008084814>] ret_from_fork+0x10/0x18

The simple solution is to put the gate_work on the same WQ_MEM_RECLAIM
work queue as the ungate_work.

Fixes: 10e5e37581fc ("scsi: ufs: Add clock ungating to a separate workqueue")
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: esp_scsi: Track residual for PIO transfers

[ Upstream commit fd47d919d0c336e7c22862b51ee94927ffea227a ]

If a target disconnects during a PIO data transfer the command may fail
when the target reconnects:

scsi host1: DMA length is zero!
scsi host1: cur adr[04380000] len[00000000]

The scsi bus is then reset. This happens because the residual reached
zero before the transfer was completed.

The usual residual calculation relies on the Transfer Count registers.
That works for DMA transfers but not for PIO transfers. Fix the problem
by storing the PIO transfer residual and using that to correctly
calculate bytes_sent.

Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: Add missing exports of node name compare functions

[ Upstream commit 173ee3962959a1985a109f81539a403b5cd07ae7 ]

Commit f42b0e18f2e5 ("of: add node name compare helper functions")
failed to add the module exports to of_node_name_eq() and
of_node_name_prefix(). Add them now.

Fixes: f42b0e18f2e5 ("of: add node name compare helper functions")
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: fix memleak for mempool

[ Upstream commit 6aaa58c994277647f8b05ffef3b9b225a2d08f36 ]

I noticed kmemleak report memory leak when run create/stop
md in a loop, backtrace:
[<000000001ca975e7>] mempool_create_node+0x86/0xd0
[<0000000095576bcd>] md_run+0x1057/0x1410 [md_mod]
[<000000007b45c5fc>] do_md_run+0x15/0x130 [md_mod]
[<000000001ede9ec0>] md_ioctl+0x1f49/0x25d0 [md_mod]
[<000000004142cacf>] blkdev_ioctl+0x680/0xd00

The root cause is we alloc mddev->flush_pool and
mddev->flush_bio_pool in md_run, but from do_md_stop
will not call into md_stop but __md_stop, move the
mempool_destroy to __md_stop fixes the problem for me.

The bug was introduced in 5a409b4f56d5, the fixes should go to
4.18+

Fixes: 5a409b4f56d5 ("MD: fix lock contention for flush bios")
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MD: Memory leak when flush bio size is zero

[ Upstream commit af9b926de9c5986ab009e64917de87c9758bab10 ]

flush_pool is leaked when flush bio size is zero

Fixes: 5a409b4f56d5 ("MD: fix lock contention for flush bios")
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to account IO correctly for cgroup writeback

[ Upstream commit 78efac537de33faab9a4302cc05a70bb4a8b3b63 ]

Now, we have supported cgroup writeback, it depends on correctly IO
account of specified filesystem.

But in commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"),
we split write paths from f2fs_submit_page_mbio() to two:
- f2fs_submit_page_bio() for IPU path
- f2fs_submit_page_bio() for OPU path

But still we account write IO only in f2fs_submit_page_mbio(), result in
incorrect IO account, fix it by adding missing IO account in IPU path.

Fixes: d1b3e72d5490 ("f2fs: submit bio of in-place-update pages")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac-sun8i: fix OF child-node lookup

[ Upstream commit ac63043d8cb5503c7e0fe110f947eacf2663804e ]

Use the new of_get_compatible_child() helper to lookup the mdio-internal
child node instead of using of_find_compatible_node(), which searches
the entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the mdio-mux node). Fortunately, this was inadvertently
balanced by a failure to drop the mdio-mux reference after lookup.

While at it, also fix the related mdio-internal- and phy-node reference
leaks.

Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup, netclassid: add a preemption point to write_classid

[ Upstream commit a90e90b7d55e789c71d85b946ffb5c1ab2f137ca ]

We have seen a customer complaining about soft lockups on !PREEMPT
kernel config with 4.4 based kernel

[1072141.435366] NMI watchdog: BUG: soft lockup - CPU#21 stuck for 22s! [systemd:1]
[1072141.444090] Modules linked in: mpt3sas raid_class binfmt_misc af_packet 8021q garp mrp stp llc xfs libcrc32c bonding iscsi_ibft iscsi_boot_sysfs msr ext4 crc16 jbd2 mbcache cdc_ether usbnet mii joydev hid_generic usbhid intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_ssif mgag200 i2c_algo_bit ttm ipmi_devintf drbg ixgbe drm_kms_helper vxlan ansi_cprng ip6_udp_tunnel drm aesni_intel udp_tunnel aes_x86_64 iTCO_wdt syscopyarea ptp xhci_pci lrw iTCO_vendor_support pps_core gf128mul ehci_pci glue_helper sysfillrect mdio pcspkr sb_edac ablk_helper cryptd ehci_hcd sysimgblt xhci_hcd fb_sys_fops edac_core mei_me lpc_ich ses usbcore enclosure dca mfd_core ipmi_si mei i2c_i801 scsi_transport_sas usb_common ipmi_msghandler shpchp fjes wmi processor button acpi_pad btrfs xor raid6_pq sd_mod crc32c_intel megaraid_sas sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod md_mod autofs4
[1072141.444146] Supported: Yes
[1072141.444149] CPU: 21 PID: 1 Comm: systemd Not tainted 4.4.121-92.80-default #1
[1072141.444150] Hardware name: LENOVO Lenovo System x3650 M5 -[5462P4U]- -[5462P4U]-/01GR451, BIOS -[TCE136H-2.70]- 06/13/2018
[1072141.444151] task: ffff880191bd0040 ti: ffff880191bd4000 task.ti: ffff880191bd4000
[1072141.444153] RIP: 0010:[<ffffffff815229f9>]  [<ffffffff815229f9>] update_classid_sock+0x29/0x40
[1072141.444157] RSP: 0018:ffff880191bd7d58  EFLAGS: 00000286
[1072141.444158] RAX: ffff883b177cb7c0 RBX: 0000000000000000 RCX: 0000000000000000
[1072141.444159] RDX: 00000000000009c7 RSI: ffff880191bd7d5c RDI: ffff8822e29bb200
[1072141.444160] RBP: ffff883a72230980 R08: 0000000000000101 R09: 0000000000000000
[1072141.444161] R10: 0000000000000008 R11: f000000000000000 R12: ffffffff815229d0
[1072141.444162] R13: 0000000000000000 R14: ffff881fd0a47ac0 R15: ffff880191bd7f28
[1072141.444163] FS:  00007f3e2f1eb8c0(0000) GS:ffff882000340000(0000) knlGS:0000000000000000
[1072141.444164] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1072141.444165] CR2: 00007f3e2f200000 CR3: 0000001ffea4e000 CR4: 00000000001606f0
[1072141.444166] Stack:
[1072141.444166]  ffffffa800000246 00000000000009c7 ffffffff8121d583 ffff8818312a05c0
[1072141.444168]  ffff8818312a1100 ffff880197c3b280 ffff881861422858 ffffffffffffffea
[1072141.444170]  ffffffff81522b1c ffffffff81d0ca20 ffff8817fa17b950 ffff883fdd8121e0
[1072141.444171] Call Trace:
[1072141.444179]  [<ffffffff8121d583>] iterate_fd+0x53/0x80
[1072141.444182]  [<ffffffff81522b1c>] write_classid+0x4c/0x80
[1072141.444187]  [<ffffffff8111328b>] cgroup_file_write+0x9b/0x100
[1072141.444193]  [<ffffffff81278bcb>] kernfs_fop_write+0x11b/0x150
[1072141.444198]  [<ffffffff81201566>] __vfs_write+0x26/0x100
[1072141.444201]  [<ffffffff81201bed>] vfs_write+0x9d/0x190
[1072141.444203]  [<ffffffff812028c2>] SyS_write+0x42/0xa0
[1072141.444207]  [<ffffffff815f58c3>] entry_SYSCALL_64_fastpath+0x1e/0xca
[1072141.445490] DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x1e/0xca

If a cgroup has many tasks with many open file descriptors then we would
end up in a large loop without any rescheduling point throught the
operation. Add cond_resched once per task.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix a credits leak for compund commands

[ Upstream commit cb5c2e63948451d38c977685fffc06e23beb4517 ]

When processing the mids for compounds we would only add credits based on
the last successful mid in the compound which would leak credits and
eventually triggering a re-connect.

Fix this by splitting the mid processing part into two loops instead of one
where the first loop just waits for all mids and then counts how many
credits we were granted for the whole compound.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: da9062/61: Prevent hardware access during system suspend

[ Upstream commit 760eea43f8c6d48684f1f34b8a02fddc1456e849 ]

The workqueue used for monitoring the hardware may run while the device
is already suspended.  Fix this by using the freezable system workqueue
instead, cfr. commit 51e20d0e3a60cf46 ("thermal: Prevent polling from
happening during system suspend").

Fixes: 608567aac3206ae8 ("thermal: da9062/61: Thermal junction temperature monitoring driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: rcar_thermal: Prevent doing work after unbind

[ Upstream commit 697ee786f15d7b65c7f3045d45fe3a05d28e0911 ]

When testing bind/unbind on r8a7791/koelsch:

    WARNING: CPU: 1 PID: 697 at lib/debugobjects.c:329 debug_print_object+0x8c/0xb4
    ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x10

This happens if the workqueue runs after the device has been unbound.
Fix this by cancelling any queued work during remove.

Fixes: e0a5172e9eec7f0d ("thermal: rcar: add interrupt support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Apply NOLPM quirk for SAMSUNG MZ7TD256HAFV-000L9

[ Upstream commit a435ab4f80f983c53b4ca4f8c12b3ddd3ca17670 ]

med_power_with_dipm causes my T450 to freeze with a SAMSUNG
MZ7TD256HAFV-000L9 SSD (firmware DXT02L5Q).

Switching the LPM to max_performance fixes this issue.

Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: schedule hardware restart if WMI command times out

[ Upstream commit a9911937e7d332761e8c4fcbc7ba0426bdc3956f ]

When running in AP mode, ath10k sometimes suffers from TX credit
starvation. The issue is hard to reproduce and shows up once in a
few days, but has been repeatedly seen with QCA9882 and a large
range of firmwares, including 10.2.4.70.67.

Once the module is in this state, TX credits are never replenished,
which results in "SWBA overrun" errors, as no beacons can be sent.
Even worse, WMI commands run in a timeout while holding the conf
mutex for three seconds each, making any further operations slow
and the whole system unresponsive.

The firmware/driver never recovers from that state automatically,
and triggering TX flush or warm restarts won't work over WMI. So
issue a hardware restart if a WMI command times out due to missing
TX credits. This implies a connectivity outage of about 1.4s in AP
mode, but brings back the interface and the whole system to a usable
state. WMI command timeouts have not been seen in absent of this
specific issue, so taking such drastic actions seems legitimate.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wil6210: fix RX buffers release and unmap

[ Upstream commit 84f16fbb62384fb209cd35741d94eb00b5ca2746 ]

RX SKBs are released in both wil6210 rmmod and RX handle.
As there is no lock to protect the buffers DMA unmap,
the SKB pointer in buff_arr is used to check if the buffer
memory was already released.
Setting wil->rx_buff_mgmt.buff_arr[buff_id].skb to NULL before the DMA
memory unmap will prevent duplicate unmapping of the same memory.
Move the buffer ID to the free list also in case the SKB is NULL.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbevf: VF2VF TCP RSS

[ Upstream commit 7fb94bd58dd6650a0158e68d414e185077d8b57a ]

While VF2VF with RSS communication, RSS Type were wrongly recognized
and RSS hash was not calculated as it should be. Packets was
distributed on various queues by accident.
This commit fixes that behaviour and causes proper RSS Type recognition.

Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: disallow IPsec Tx offload when in SR-IOV mode

[ Upstream commit 47b6f50077e68bcd544f657526dad4bfdce7e87d ]

There seems to be a problem in the x540's internal switch wherein if SR-IOV
mode is enabled and an offloaded IPsec packet is sent to a local VF,
the packet is silently dropped.  This might never be a problem as it is
somewhat a corner case, but if someone happens to be using IPsec offload
from the PF to a VF that just happens to get migrated to the local box,
communication will mysteriously fail.

Not good.

A simple way to protect from this is to simply not allow any IPsec offloads
for outgoing packets when num_vfs != 0.  This doesn't help any offloads that
were created before SR-IOV was enabled, but we'll get to that later.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: brcmstb: allow 0 width GPIO banks

[ Upstream commit bfba223dcc4548632d8f3bfd15690a86d4c68504 ]

Sometimes we have empty banks within the GPIO block. This commit allows
proper handling of 0 width GPIO banks. We handle 0 width GPIO banks by
incrementing the bank and number of GPIOs, but not initializing them.
This will mean a call into the non-existent GPIOs will return an error.

Also remove "GPIO registered" dev print. This information is misleading
since the incremented banks and gpio_base do not reflect the actual GPIOs
that get initialized. We leave this information out since it is already
printed with dev_dbg.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: fix BAR seq ctrl reporting

[ Upstream commit 941ab4eb66c10bc5c7234e83a7a858b2806ed151 ]

There is a bug in FW where the sequence control may be
incorrect, and the driver overrides it with the value
of the ieee80211 header.

However, in BAR there is no sequence control in the header,
which result with arbitrary sequence.

This access to an unknown location is bad and it makes the
logs very confusing - so fix it.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libertas_tf: prevent underflow in process_cmdrequest()

[ Upstream commit 3348ef6a6a126706d6a73ed40c18d8033df72783 ]

If recvlength is less than MESSAGE_HEADER_LEN (4) we would end up
corrupting memory.

Fixes: c305a19a0d0a ("libertas_tf: usb specific functions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: fix memory alignment issue in ARM32 platforms

[ Upstream commit baa8caf4ab7af2d9e84b566b99fe919a4e9e7562 ]

During testing in ARM32 platforms, observed below kernel panic, as driver
accessing data beyond the allocated memory while submitting URB to USB.

Fix: Resolved this by specifying correct length by considering 64 bit
alignment. so that, USB bus driver will access only allocated memory.

Unit-test: Tested and confirm that driver bring up and scanning,
connection and data transfer works fine with this fix.

...skipping...
[   25.389450] Unable to handle kernel paging request at virtual
       address 5aa11422
[   25.403078] Internal error: Oops: 5 [#1] SMP ARM
[   25.407703] Modules linked in: rsi_usb
[   25.411473] CPU: 1 PID: 317 Comm: RX-Thread Not tainted 4.18.0-rc7 #1
[   25.419221] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[   25.425764] PC is at skb_release_data+0x90/0x168
[   25.430393] LR is at skb_release_all+0x28/0x2c
[   25.434842] pc : [<807435b0>] lr : [<80742ba0>] psr: 200e0013 5aa1141e
[   25.464633] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32 ISA ARM Segment none
[   25.477524] Process RX-Thread (pid: 317, stack limit = 0x(ptrval))
[   25.483709] Stack: (0xedf69ed8 to 0xedf6a000)
[   25.569907] Backtrace:
[   25.572368] [<80743520>] (skb_release_data) from [<80742ba0>]
       (skb_release_all+0x28/0x2c)
[   25.580555] r9:7f00258c r8:00000001 r7:ee355000 r6:eddab0d0
       r5:eddab000 r4:eddbb840
[   25.588308] [<80742b78>] (skb_release_all) from [<807432cc>]
       (consume_skb+0x30/0x50)
[   25.596055] r5:eddab000 r4:eddbb840
[   25.599648] [<8074329c>] (consume_skb) from [<7f00117c>]
       (rsi_usb_rx_thread+0x64/0x12c [rsi_usb])
[   25.608524] r5:eddab000 r4:eddbb840
[   25.612116] [<7f001118>] (rsi_usb_rx_thread [rsi_usb]) from
       [<80142750>] (kthread+0x11c/0x15c)
[   25.620735] r10:ee9ff9e0 r9:edcde3b8 r8:ee355000 r7:edf68000
       r6:edd3a780 r5:00000000
[   25.628567] r4:edcde380
[   25.631110] [<80142634>] (kthread) from [<801010e8>]
       (ret_from_fork+0x14/0x2c)
[   25.638336] Exception stack(0xedf69fb0 to 0xedf69ff8)
[   25.682929] ---[ end trace 8236a5496f5b5d3b ]---

Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mt76x2u: run device cleanup routine if resume fails

[ Upstream commit 9b2fd48d36e25b9be9ddb8be8cc1eb263a1d1843 ]

Cleanup {tx,rx} and mcu queues if resume operation fails

Fixes: ee676cd5017c ("mt76: add driver code for MT76x2u based devices")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6xxx: Fix writing to a PHY page.

[ Upstream commit c309b158090d788e96ee597444965cb79b040484 ]

After changing to the needed page, actually write the value to the
register!

Fixes: 09cb7dfd3f14 ("net: dsa: mv88e6xxx: describe PHY page and SerDes")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: Fix for vf vlan delete failed problem

[ Upstream commit 41dafea2af781d8e3ab8626d236b52e4172905a3 ]

There are only 128 entries in vf vlan table, if user has added
more than 128 vlan, fw will ignore it and disable the vf vlan
table. So when user deletes the vlan entry that has not been
set to vf vlan table, fw will return not found result and driver
treat that as error, which will cause vlan delete failed problem.

This patch fixes it by returning ok when fw returns not found
result.

Fixes: 6c251711b37f ("net: hns3: Disable vf vlan filter when vf vlan table is full")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: Fix ping exited problem when doing lp selftest

[ Upstream commit 3f8601f0f5716c4e63a9f215bbc581df42859d61 ]

When ping is runnig and user executes the loopback selftest, the
ping cmd will stop and exit.

This patch fixes it by using the hns3_nic_net_open/stop to offline
the netdev when doing loopback selftest.

Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: Preserve vlan 0 in hardware table

[ Upstream commit daaa8521760ee4d4e65f309c4c37b3a1e58c9d4e ]

When netdev is down, the stack will delete the vlan from
hardware including vlan0, which will cause problem when
doing loopback selftest when netdev is down.

This patch fixes it by always preserving vlan 0 in hardware,
because vlan 0 is defalut vlan, which should always be in
hardware.

Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() to be compliant

[ Upstream commit b432414b996d32a1bd9afe2bd595bd5729c1477f ]

If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice
it looks like nonsense.

The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
compliant"), but it was pointed out that ssbi-gpio has the same
problem.  Let's fix it there too.

Fixes: b4c45fe974bc ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant

[ Upstream commit 0d5b476f8f57fcb06c45fe27681ac47254f63fd2 ]

If you look at "pinconf-groups" in debugfs for ssbi-mpp you'll notice
it looks like nonsense.

The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
compliant"), but it was pointed out that ssbi-mpp has the same
problem.  Let's fix it there too.

NOTE: in case it's helpful to someone reading this, the way to tell
whether to do the -EINVAL or not is to look at the PCONFDUMP for a
given attribute.  If the last element (has_arg) is false then you need
to do the -EINVAL trick.

ALSO NOTE: it seems unlikely that the values returned when we try to
get PIN_CONFIG_BIAS_PULL_UP will actually be printed since "has_arg"
is false for that one, but I guess it's still fine to return different
values so I kept doing that.  It seems like another driver (ssbi-gpio)
uses a custom attribute (PM8XXX_QCOM_PULL_UP_STRENGTH) for something
similar so maybe a future change should do that here too.

Fixes: cfb24f6ebd38 ("pinctrl: Qualcomm SPMI PMIC MPP pin controller driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tests: Fix record+probe_libc_inet_pton.sh without ping's debuginfo

[ Upstream commit 1632936480a53d85ef3012cd9f290e247251cbb9 ]

When we don't have the iputils-debuginfo package installed, i.e. when we
don't have the DWARF information needed to resolve ping's samples, we
end up failing this 'perf test' entry:

  # perf test ping
  62: probe libc's inet_pton & backtrace it with ping       : Ok
  # rpm -e iputils-debuginfo
  # perf test ping
  62: probe libc's inet_pton & backtrace it with ping       : FAILED!
  #

Fix it to accept "[unknown]" where the symbol + offset, when resolved,
is expected.

I think this will fail in the other arches as well, but since I can't
test now, I'm leaving s390x and ppc cases as-is.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 7903a7086723 ("perf script: Show symbol offsets by default")
Link: https://lkml.kernel.org/n/tip-hnizqwqrs03vcq1b74yao0f6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

failover: Add missing check to validate 'slave_dev' in net_failover_slave_unregister

[ Upstream commit 9e7e6cabf371cc008cb2244a04c012b516753693 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/net_failover.c: In function 'net_failover_slave_unregister':
drivers/net/net_failover.c:598:35: warning:
 variable 'primary_dev' set but not used [-Wunused-but-set-variable]

There should check the validity of 'slave_dev'.

Fixes: cfc80d9a1163 ("net: Introduce net_failover driver")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf/verifier: fix verifier instability

[ Upstream commit a9c676bc8fc58d00eea9836fb14ee43c0346416a ]

Edward Cree says:
In check_mem_access(), for the PTR_TO_CTX case, after check_ctx_access()
has supplied a reg_type, the other members of the register state are set
appropriately.  Previously reg.range was set to 0, but as it is in a
union with reg.map_ptr, which is larger, upper bytes of the latter were
left in place.  This then caused the memcmp() in regsafe() to fail,
preventing some branches from being pruned (and occasionally causing the
same program to take a varying number of processed insns on repeated
verifier runs).

Fix the instability by clearing bpf_reg_state in __mark_reg_[un]known()

Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Debugged-by: Edward Cree <ecree@solarflare.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: qcom: spmi-mpp: Fix drive strength setting

[ Upstream commit 89c68b102f13f123aaef22b292526d6b92501334 ]

It looks like we parse the drive strength setting here, but never
actually write it into the hardware to update it. Parse the setting and
then write it at the end of the pinconf setting function so that it
actually sticks in the hardware.

Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode")
Cc: Doug Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers

[ Upstream commit 240714061c58e6b1abfb3322398a7634151c06cb ]

Bay and Cherry Trail DSTDs represent a different set of devices depending
on which OS the device think it is booting. One set of decices for Windows
and another set of devices for Android which targets the Android-x86 Linux
kernel fork (which e.g. used to have its own display driver instead of
using the i915 driver).

Which set of devices we are actually going to get is out of our control,
this is controlled by the ACPI OSID variable, which gets either set through
an EFI setup option, or sometimes is autodetected. So we need to support
both.

This commit adds support for the 80862286 and 808622C0 ACPI HIDs which we
get for the first resp. second DMA controller on Cherry Trail devices when
OSID is set to Android.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: gpio: No MISO does not imply no RX

[ Upstream commit abf5feef3ff0cefade0c76be53b59e55fdd46093 ]

There is a logical problem in spi-gpio with host just
assigning a MOSI line and no MISO: this is interpreted
as the host cannot do RX and the host is flagged with
SPI_MASTER_NO_RX.

This is wrong: since GPIO lines can switch direction,
in 3WIRE operation the host will simply reverse the
direction of the GPIO line and start reading from it,
there is even code for doing this in the driver, but
it went unnoticed because it was tested by using a
master with 4 wires but a device using just 3 wires.

Remove the offending flag.

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()

[ Upstream commit 819319fc93461c07b9cdb3064f154bd8cfd48172 ]

Make reuse_unused_kprobe() to return error code if
it fails to reuse unused kprobe for optprobe instead
of calling BUG_ON().

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/153666124040.21306.14150398706331307654.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>