platform/kernel/linux-rpi.git
3 years agonet: ip_tunnel: fix mtu calculation for ETHER tunnel devices
Hangbin Liu [Fri, 9 Jul 2021 03:45:02 +0000 (11:45 +0800)]
net: ip_tunnel: fix mtu calculation for ETHER tunnel devices

Commit 28e104d00281 ("net: ip_tunnel: fix mtu calculation") removed
dev->hard_header_len subtraction when calculate MTU for tunnel devices
as there is an overhead for device that has header_ops.

But there are ETHER tunnel devices, like gre_tap or erspan, which don't
have header_ops but set dev->hard_header_len during setup. This makes
pkts greater than (MTU - ETH_HLEN) could not be xmited. Fix it by
subtracting the ETHER tunnel devices' dev->hard_header_len for MTU
calculation.

Fixes: 28e104d00281 ("net: ip_tunnel: fix mtu calculation")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: do not reuse skbuff allocated from skbuff_fclone_cache in the skb cache
Antoine Tenart [Fri, 9 Jul 2021 16:16:09 +0000 (18:16 +0200)]
net: do not reuse skbuff allocated from skbuff_fclone_cache in the skb cache

Some socket buffers allocated in the fclone cache (in __alloc_skb) can
end-up in the following path[1]:

napi_skb_finish
  __kfree_skb_defer
    napi_skb_cache_put

The issue is napi_skb_cache_put is not fclone friendly and will put
those skbuff in the skb cache to be reused later, although this cache
only expects skbuff allocated from skbuff_head_cache. When this happens
the skbuff is eventually freed using the wrong origin cache, and we can
see traces similar to:

[ 1223.947534] cache_from_obj: Wrong slab cache. skbuff_head_cache but object is from skbuff_fclone_cache
[ 1223.948895] WARNING: CPU: 3 PID: 0 at mm/slab.h:442 kmem_cache_free+0x251/0x3e0
[ 1223.950211] Modules linked in:
[ 1223.950680] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.13.0+ #474
[ 1223.951587] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-3.fc34 04/01/2014
[ 1223.953060] RIP: 0010:kmem_cache_free+0x251/0x3e0

Leading sometimes to other memory related issues.

Fix this by using __kfree_skb for fclone skbuff, similar to what is done
the other place __kfree_skb_defer is called.

[1] At least in setups using veth pairs and tunnels. Building a kernel
    with KASAN we can for example see packets allocated in
    sk_stream_alloc_skb hit the above path and later the issue arises
    when the skbuff is reused.

Fixes: 9243adfc311a ("skbuff: queue NAPI_MERGED_FREE skbs into NAPI cache instead of freeing")
Cc: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
Talal Ahmad [Fri, 9 Jul 2021 15:43:06 +0000 (11:43 -0400)]
tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path

sk_wmem_schedule makes sure that sk_forward_alloc has enough
bytes for charging that is going to be done by sk_mem_charge.

In the transmit zerocopy path, there is sk_mem_charge but there was
no call to sk_wmem_schedule. This change adds that call.

Without this call to sk_wmem_schedule, sk_forward_alloc can go
negetive which is a bug because sk_forward_alloc is a per-socket
space that has been forward charged so this can't be negative.

Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY")
Signed-off-by: Talal Ahmad <talalahmad@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: send SYNACK packet with accepted fwmark
Alexander Ovechkin [Fri, 9 Jul 2021 15:28:23 +0000 (18:28 +0300)]
net: send SYNACK packet with accepted fwmark

commit e05a90ec9e16 ("net: reflect mark on tcp syn ack packets")
fixed IPv4 only.

This part is for the IPv6 side.

Fixes: e05a90ec9e16 ("net: reflect mark on tcp syn ack packets")
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Acked-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: ti: fix UAF in tlan_remove_one
Pavel Skripkin [Fri, 9 Jul 2021 14:58:29 +0000 (17:58 +0300)]
net: ti: fix UAF in tlan_remove_one

priv is netdev private data and it cannot be
used after free_netdev() call. Using priv after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.

Fixes: 1e0a8b13d355 ("tlan: cancel work at remove path")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: qcom/emac: fix UAF in emac_remove
Pavel Skripkin [Fri, 9 Jul 2021 14:24:18 +0000 (17:24 +0300)]
net: qcom/emac: fix UAF in emac_remove

adpt is netdev private data and it cannot be
used after free_netdev() call. Using adpt after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.

Fixes: 54e19bc74f33 ("net: qcom/emac: do not use devm on internal phy pdev")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: moxa: fix UAF in moxart_mac_probe
Pavel Skripkin [Fri, 9 Jul 2021 14:09:53 +0000 (17:09 +0300)]
net: moxa: fix UAF in moxart_mac_probe

In case of netdev registration failure the code path will
jump to init_fail label:

init_fail:
netdev_err(ndev, "init failed\n");
moxart_mac_free_memory(ndev);
irq_map_fail:
free_netdev(ndev);
return ret;

So, there is no need to call free_netdev() before jumping
to error handling path, since it can cause UAF or double-free
bug.

Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: bcmgenet: Ensure all TX/RX queues DMAs are disabled
Florian Fainelli [Fri, 9 Jul 2021 01:55:32 +0000 (18:55 -0700)]
net: bcmgenet: Ensure all TX/RX queues DMAs are disabled

Make sure that we disable each of the TX and RX queues in the TDMA and
RDMA control registers. This is a correctness change to be symmetrical
with the code that enables the TX and RX queues.

Tested-by: Maxime Ripard <maxime@cerno.tech>
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'ncsi-phy-link-up'
David S. Miller [Thu, 8 Jul 2021 21:16:39 +0000 (14:16 -0700)]
Merge branch 'ncsi-phy-link-up'

Ivan Mikhaylov says:

====================
net/ncsi: Add NCSI Intel OEM command to keep PHY link up

Add NCSI Intel OEM command to keep PHY link up and prevents any channel
resets during the host load on i210. Also includes dummy response handler for
Intel manufacturer id.

Changes from v1:
 1. sparse fixes about casts
 2. put it after ncsi_dev_state_probe_cis instead of
    ncsi_dev_state_probe_channel because sometimes channel is not ready
    after it
 3. inl -> intel
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/ncsi: add dummy response handler for Intel boards
Ivan Mikhaylov [Thu, 8 Jul 2021 12:27:54 +0000 (15:27 +0300)]
net/ncsi: add dummy response handler for Intel boards

Add the dummy response handler for Intel boards to prevent incorrect
handling of OEM commands.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/ncsi: add NCSI Intel OEM command to keep PHY up
Ivan Mikhaylov [Thu, 8 Jul 2021 12:27:53 +0000 (15:27 +0300)]
net/ncsi: add NCSI Intel OEM command to keep PHY up

This allows to keep PHY link up and prevents any channel resets during
the host load.

It is KEEP_PHY_LINK_UP option(Veto bit) in i210 datasheet which
block PHY reset and power state changes.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/ncsi: fix restricted cast warning of sparse
Ivan Mikhaylov [Thu, 8 Jul 2021 12:27:52 +0000 (15:27 +0300)]
net/ncsi: fix restricted cast warning of sparse

Sparse reports:
net/ncsi/ncsi-rsp.c:406:24: warning: cast to restricted __be32
net/ncsi/ncsi-manage.c:732:33: warning: cast to restricted __be32
net/ncsi/ncsi-manage.c:756:25: warning: cast to restricted __be32
net/ncsi/ncsi-manage.c:779:25: warning: cast to restricted __be32

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: microchip: sparx5: fix kconfig warning
Randy Dunlap [Thu, 8 Jul 2021 17:33:10 +0000 (10:33 -0700)]
net: microchip: sparx5: fix kconfig warning

PHY_SPARX5_SERDES depends on OF so SPARX5_SWITCH should also depend
on OF since 'select' does not follow any dependencies.

WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES
  Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=n] && HAS_IOMEM [=y]
  Selected by [y]:
  - SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y]

Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agocxgb4: fix IRQ free race during driver unload
Shahjada Abul Husain [Thu, 8 Jul 2021 16:21:56 +0000 (21:51 +0530)]
cxgb4: fix IRQ free race during driver unload

IRQs are requested during driver's ndo_open() and then later
freed up in disable_interrupts() during driver unload.
A race exists where driver can set the CXGB4_FULL_INIT_DONE
flag in ndo_open() after the disable_interrupts() in driver
unload path checks it, and hence misses calling free_irq().

Fix by unregistering netdevice first and sync with driver's
ndo_open(). This ensures disable_interrupts() checks the flag
correctly and frees up the IRQs properly.

Fixes: b37987e8db5f ("cxgb4: Disable interrupts and napi before unregistering netdev")
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomt76: mt7921: continue to probe driver when fw already downloaded
Aaron Ma [Thu, 8 Jul 2021 13:17:10 +0000 (21:17 +0800)]
mt76: mt7921: continue to probe driver when fw already downloaded

When reboot system, no power cycles, firmware is already downloaded,
return -EIO will break driver as error:
mt7921e: probe of 0000:03:00.0 failed with error -5

Skip firmware download and continue to probe.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: 1c099ab44727c ("mt76: mt7921: add MCU support")
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoatl1c: fix Mikrotik 10/25G NIC detection
Gatis Peisenieks [Thu, 8 Jul 2021 09:49:04 +0000 (12:49 +0300)]
atl1c: fix Mikrotik 10/25G NIC detection

Since Mikrotik 10/25G NIC MDIO op emulation is not 100% reliable,
on rare occasions it can happen that some physical functions of
the NIC do not get initialized due to timeouted early MDIO op.

This changes the atl1c probe on Mikrotik 10/25G NIC not to
depend on MDIO op emulation.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoptp: Relocate lookup cookie to correct block.
Jonathan Lemon [Thu, 8 Jul 2021 18:04:08 +0000 (11:04 -0700)]
ptp: Relocate lookup cookie to correct block.

An earlier commit set the pps_lookup cookie, but the line
was somehow added to the wrong code block.  Correct this.

Fixes: 8602e40fc813 ("ptp: Set lookup cookie when creating a PTP PPS source.")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoipv6: tcp: drop silly ICMPv6 packet too big messages
Eric Dumazet [Thu, 8 Jul 2021 07:21:09 +0000 (00:21 -0700)]
ipv6: tcp: drop silly ICMPv6 packet too big messages

While TCP stack scales reasonably well, there is still one part that
can be used to DDOS it.

IPv6 Packet too big messages have to lookup/insert a new route,
and if abused by attackers, can easily put hosts under high stress,
with many cpus contending on a spinlock while one is stuck in fib6_run_gc()

ip6_protocol_deliver_rcu()
 icmpv6_rcv()
  icmpv6_notify()
   tcp_v6_err()
    tcp_v6_mtu_reduced()
     inet6_csk_update_pmtu()
      ip6_rt_update_pmtu()
       __ip6_rt_update_pmtu()
        ip6_rt_cache_alloc()
         ip6_dst_alloc()
          dst_alloc()
           ip6_dst_gc()
            fib6_run_gc()
             spin_lock_bh() ...

Some of our servers have been hit by malicious ICMPv6 packets
trying to _increase_ the MTU/MSS of TCP flows.

We believe these ICMPv6 packets are a result of a bug in one ISP stack,
since they were blindly sent back for _every_ (small) packet sent to them.

These packets are for one TCP flow:
09:24:36.266491 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.266509 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.316688 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.316704 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240
09:24:36.608151 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240

TCP stack can filter some silly requests :

1) MTU below IPV6_MIN_MTU can be filtered early in tcp_v6_err()
2) tcp_v6_mtu_reduced() can drop requests trying to increase current MSS.

This tests happen before the IPv6 routing stack is entered, thus
removing the potential contention and route exhaustion.

Note that IPv6 stack was performing these checks, but too late
(ie : after the route has been added, and after the potential
garbage collect war)

v2: fix typo caught by Martin, thanks !
v3: exports tcp_mtu_to_mss(), caught by David, thanks !

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoskbuff: Fix build with SKB extensions disabled
Florian Fainelli [Thu, 8 Jul 2021 04:10:51 +0000 (21:10 -0700)]
skbuff: Fix build with SKB extensions disabled

We will fail to build with CONFIG_SKB_EXTENSIONS disabled after
8550ff8d8c75 ("skbuff: Release nfct refcount on napi stolen or re-used
skbs") since there is an unconditionally use of skb_ext_find() without
an appropriate stub. Simply build the code conditionally and properly
guard against both COFNIG_SKB_EXTENSIONS as well as
CONFIG_NET_TC_SKB_EXT being disabled.

Fixes: Fixes: 8550ff8d8c75 ("skbuff: Release nfct refcount on napi stolen or re-used skbs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoipmr: Fix indentation issue
Roy, UjjaL [Wed, 7 Jul 2021 18:18:33 +0000 (23:48 +0530)]
ipmr: Fix indentation issue

Fixed indentation by removing extra spaces.

Signed-off-by: Roy, UjjaL <royujjal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agosock: unlock on error in sock_setsockopt()
Dan Carpenter [Wed, 7 Jul 2021 10:01:00 +0000 (13:01 +0300)]
sock: unlock on error in sock_setsockopt()

If copy_from_sockptr() then we need to unlock before returning.

Fixes: d463126e23f1 ("net: sock: extend SO_TIMESTAMPING for PHC binding")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
David S. Miller [Wed, 7 Jul 2021 21:00:14 +0000 (14:00 -0700)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Do not refresh timeout in SYN_SENT for syn retransmissions.
   Add selftest for unreplied TCP connection, from Florian Westphal.

2) Fix null dereference from error path with hardware offload
   in nftables.

3) Remove useless nf_ct_gre_keymap_flush() from netns exit path,
   from Vasily Averin.

4) Missing rcu read-lock side in ctnetlink helper info dump,
   also from Vasily.

5) Do not mark RST in the reply direction coming after SYN packet
   for an out-of-sync entry, from Ali Abdallah and Florian Westphal.

6) Add tcp_ignore_invalid_rst sysctl to allow to disable out of
   segment RSTs, from Ali.

7) KCSAN fix for nf_conntrack_all_lock(), from Manfred Spraul.

8) Honor NFTA_LAST_SET in nft_last.

9) Fix incorrect arithmetics when restore last_jiffies in nft_last.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoselftests: icmp_redirect: IPv6 PMTU info should be cleared after redirect
Hangbin Liu [Wed, 7 Jul 2021 08:15:30 +0000 (16:15 +0800)]
selftests: icmp_redirect: IPv6 PMTU info should be cleared after redirect

After redirecting, it's already a new path. So the old PMTU info should
be cleared. The IPv6 test "mtu exception plus redirect" should only
has redirect info without old PMTU.

The IPv4 test can not be changed because of legacy.

Fixes: ec8105352869 ("selftests: Add redirect tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoselftests: icmp_redirect: remove from checking for IPv6 route get
Hangbin Liu [Wed, 7 Jul 2021 08:15:29 +0000 (16:15 +0800)]
selftests: icmp_redirect: remove from checking for IPv6 route get

If the kernel doesn't enable option CONFIG_IPV6_SUBTREES, the RTA_SRC
info will not be exported to userspace in rt6_fill_node(). And ip cmd will
not print "from ::" to the route output. So remove this check.

Fixes: ec8105352869 ("selftests: Add redirect tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agostmmac: platform: Fix signedness bug in stmmac_probe_config_dt()
YueHaibing [Wed, 7 Jul 2021 07:53:35 +0000 (15:53 +0800)]
stmmac: platform: Fix signedness bug in stmmac_probe_config_dt()

The "plat->phy_interface" variable is an enum and in this context GCC
will treat it as an unsigned int so the error handling is never
triggered.

Fixes: b9f0b2f634c0 ("net: stmmac: platform: fix probe for ACPI devices")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agostmmac: dwmac-loongson: Fix unsigned comparison to zero
YueHaibing [Wed, 7 Jul 2021 07:50:57 +0000 (15:50 +0800)]
stmmac: dwmac-loongson: Fix unsigned comparison to zero

plat->phy_interface is unsigned integer, so the condition
can't be less than zero and the warning will never printed.

Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonetfilter: uapi: refer to nfnetlink_conntrack.h, not nf_conntrack_netlink.h
Duncan Roe [Wed, 7 Jul 2021 00:57:51 +0000 (10:57 +1000)]
netfilter: uapi: refer to nfnetlink_conntrack.h, not nf_conntrack_netlink.h

nf_conntrack_netlink.h does not exist, refer to nfnetlink_conntrack.h instead.

Signed-off-by: Duncan Roe <duncan_roe@optusnet.com.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agoipv6: fix 'disable_policy' for fwd packets
Nicolas Dichtel [Tue, 6 Jul 2021 09:13:35 +0000 (11:13 +0200)]
ipv6: fix 'disable_policy' for fwd packets

The goal of commit df789fe75206 ("ipv6: Provide ipv6 version of
"disable_policy" sysctl") was to have the disable_policy from ipv4
available on ipv6.
However, it's not exactly the same mechanism. On IPv4, all packets coming
from an interface, which has disable_policy set, bypass the policy check.
For ipv6, this is done only for local packets, ie for packets destinated to
an address configured on the incoming interface.

Let's align ipv6 with ipv4 so that the 'disable_policy' sysctl has the same
effect for both protocols.

My first approach was to create a new kind of route cache entries, to be
able to set DST_NOPOLICY without modifying routes. This would have added a
lot of code. Because the local delivery path is already handled, I choose
to focus on the forwarding path to minimize code churn.

Fixes: df789fe75206 ("ipv6: Provide ipv6 version of "disable_policy" sysctl")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoocteontx2-pf: Fix assigned error return value that is never used
Colin Ian King [Tue, 6 Jul 2021 11:18:02 +0000 (12:18 +0100)]
octeontx2-pf: Fix assigned error return value that is never used

Currently when the call to otx2_mbox_alloc_msg_cgx_mac_addr_update fails
the error return variable rc is being assigned -ENOMEM and does not
return early. rc is then re-assigned and the error case is not handled
correctly. Fix this by returning -ENOMEM rather than assigning rc.

Addresses-Coverity: ("Unused value")
Fixes: 79d2be385e9e ("octeontx2-pf: offload DMAC filters to CGX/RPM block")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'bonding-ipsec'
David S. Miller [Tue, 6 Jul 2021 17:36:59 +0000 (10:36 -0700)]
Merge branch 'bonding-ipsec'

Taehee Yoo says:

====================
net: fix bonding ipsec offload problems

This series fixes some problems related to bonding ipsec offload.

The 1, 5, and 8th patches are to add a missing rcu_read_lock().
The 2nd patch is to add null check code to bond_ipsec_add_sa.
When bonding interface doesn't have an active real interface, the
bond->curr_active_slave pointer is null.
But bond_ipsec_add_sa() uses that pointer without null check.
So that it results in null-ptr-deref.
The 3 and 4th patches are to replace xs->xso.dev with xs->xso.real_dev.
The 6th patch is to disallow to set ipsec offload if a real interface
type is bonding.
The 7th patch is to add struct bond_ipsec to manage SA.
If bond mode is changed, or active real interface is changed, SA should
be removed from old current active real interface then it should be added
to new active real interface.
But it can't, because it doesn't manage SA.
The 9th patch is to fix incorrect return value of bond_ipsec_offload_ok().

v1 -> v2:
 - Add 9th patch.
 - Do not print warning when there is no SA in bond_ipsec_add_sa_all().
 - Add comment for ipsec_lock.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobonding: fix incorrect return value of bond_ipsec_offload_ok()
Taehee Yoo [Mon, 5 Jul 2021 15:38:14 +0000 (15:38 +0000)]
bonding: fix incorrect return value of bond_ipsec_offload_ok()

bond_ipsec_offload_ok() is called to check whether the interface supports
ipsec offload or not.
bonding interface support ipsec offload only in active-backup mode.
So, if a bond interface is not in active-backup mode, it should return
false but it returns true.

Fixes: a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobonding: fix suspicious RCU usage in bond_ipsec_offload_ok()
Taehee Yoo [Mon, 5 Jul 2021 15:38:13 +0000 (15:38 +0000)]
bonding: fix suspicious RCU usage in bond_ipsec_offload_ok()

To dereference bond->curr_active_slave, it uses rcu_dereference().
But it and the caller doesn't acquire RCU so a warning occurs.
So add rcu_read_lock().

Splat looks like:
WARNING: suspicious RCU usage
5.13.0-rc6+ #1179 Not tainted
drivers/net/bonding/bond_main.c:571 suspicious
rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ping/974:
 #0: ffff888109e7db70 (sk_lock-AF_INET){+.+.}-{0:0},
at: raw_sendmsg+0x1303/0x2cb0

stack backtrace:
CPU: 2 PID: 974 Comm: ping Not tainted 5.13.0-rc6+ #1179
Call Trace:
 dump_stack+0xa4/0xe5
 bond_ipsec_offload_ok+0x1f4/0x260 [bonding]
 xfrm_output+0x179/0x890
 xfrm4_output+0xfa/0x410
 ? __xfrm4_output+0x4b0/0x4b0
 ? __ip_make_skb+0xecc/0x2030
 ? xfrm4_udp_encap_rcv+0x800/0x800
 ? ip_local_out+0x21/0x3a0
 ip_send_skb+0x37/0xa0
 raw_sendmsg+0x1bfd/0x2cb0

Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobonding: Add struct bond_ipesc to manage SA
Taehee Yoo [Mon, 5 Jul 2021 15:38:12 +0000 (15:38 +0000)]
bonding: Add struct bond_ipesc to manage SA

bonding has been supporting ipsec offload.
When SA is added, bonding just passes SA to its own active real interface.
But it doesn't manage SA.
So, when events(add/del real interface, active real interface change, etc)
occur, bonding can't handle that well because It doesn't manage SA.
So some problems(panic, UAF, refcnt leak)occur.

In order to make it stable, it should manage SA.
That's the reason why struct bond_ipsec is added.
When a new SA is added to bonding interface, it is stored in the
bond_ipsec list. And the SA is passed to a current active real interface.
If events occur, it uses bond_ipsec data to handle these events.
bond->ipsec_list is protected by bond->ipsec_lock.

If a current active real interface is changed, the following logic works.
1. delete all SAs from old active real interface
2. Add all SAs to the new active real interface.
3. If a new active real interface doesn't support ipsec offload or SA's
option, it sets real_dev to NULL.

Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobonding: disallow setting nested bonding + ipsec offload
Taehee Yoo [Mon, 5 Jul 2021 15:38:11 +0000 (15:38 +0000)]
bonding: disallow setting nested bonding + ipsec offload

bonding interface can be nested and it supports ipsec offload.
So, it allows setting the nested bonding + ipsec scenario.
But code does not support this scenario.
So, it should be disallowed.

interface graph:
bond2
   |
bond1
   |
eth0

The nested bonding + ipsec offload may not a real usecase.
So, disallowing this scenario is fine.

Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobonding: fix suspicious RCU usage in bond_ipsec_del_sa()
Taehee Yoo [Mon, 5 Jul 2021 15:38:10 +0000 (15:38 +0000)]
bonding: fix suspicious RCU usage in bond_ipsec_del_sa()

To dereference bond->curr_active_slave, it uses rcu_dereference().
But it and the caller doesn't acquire RCU so a warning occurs.
So add rcu_read_lock().

Test commands:
    ip netns add A
    ip netns exec A bash
    modprobe netdevsim
    echo "1 1" > /sys/bus/netdevsim/new_device
    ip link add bond0 type bond
    ip link set eth0 master bond0
    ip link set eth0 up
    ip link set bond0 up
    ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \
transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \
dst 14.0.0.70/24 proto tcp offload dev bond0 dir in
    ip x s f

Splat looks like:
=============================
WARNING: suspicious RCU usage
5.13.0-rc3+ #1168 Not tainted
-----------------------------
drivers/net/bonding/bond_main.c:448 suspicious rcu_dereference_check()
usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by ip/705:
 #0: ffff888106701780 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{3:3},
at: xfrm_netlink_rcv+0x59/0x80 [xfrm_user]
 #1: ffff8880075b0098 (&x->lock){+.-.}-{2:2},
at: xfrm_state_delete+0x16/0x30

stack backtrace:
CPU: 6 PID: 705 Comm: ip Not tainted 5.13.0-rc3+ #1168
Call Trace:
 dump_stack+0xa4/0xe5
 bond_ipsec_del_sa+0x16a/0x1c0 [bonding]
 __xfrm_state_delete+0x51f/0x730
 xfrm_state_delete+0x1e/0x30
 xfrm_state_flush+0x22f/0x390
 xfrm_flush_sa+0xd8/0x260 [xfrm_user]
 ? xfrm_flush_policy+0x290/0x290 [xfrm_user]
 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user]
 ? rcu_read_lock_sched_held+0x91/0xc0
 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
 ? find_held_lock+0x3a/0x1c0
 ? mutex_lock_io_nested+0x1210/0x1210
 ? sched_clock_cpu+0x18/0x170
 netlink_rcv_skb+0x121/0x350
[ ... ]

Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoixgbevf: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops
Taehee Yoo [Mon, 5 Jul 2021 15:38:09 +0000 (15:38 +0000)]
ixgbevf: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops

There are two pointers in struct xfrm_state_offload, *dev, *real_dev.
These are used in callback functions of struct xfrmdev_ops.
The *dev points whether bonding interface or real interface.
If bonding ipsec offload is used, it points bonding interface If not,
it points real interface.
And real_dev always points real interface.
So, ixgbevf should always use real_dev instead of dev.
Of course, real_dev always not be null.

Test commands:
    ip link add bond0 type bond
    #eth0 is ixgbevf interface
    ip link set eth0 master bond0
    ip link set bond0 up
    ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \
transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \
dst 14.0.0.70/24 proto tcp offload dev bond0 dir in

Splat looks like:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 6 PID: 688 Comm: ip Not tainted 5.13.0-rc3+ #1168
RIP: 0010:ixgbevf_ipsec_find_empty_idx+0x28/0x1b0 [ixgbevf]
Code: 00 00 0f 1f 44 00 00 55 53 48 89 fb 48 83 ec 08 40 84 f6 0f 84 9c
00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02
84 c0 74 08 3c 01 0f 8e 4c 01 00 00 66 81 3b 00 04 0f
RSP: 0018:ffff8880089af390 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffff8880089af4f8 R08: 0000000000000003 R09: fffffbfff4287e11
R10: 0000000000000001 R11: ffff888005de8908 R12: 0000000000000000
R13: ffff88810936a000 R14: ffff88810936a000 R15: ffff888004d78040
FS:  00007fdf9883a680(0000) GS:ffff88811a400000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055bc14adbf40 CR3: 000000000b87c005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ixgbevf_ipsec_add_sa+0x1bf/0x9c0 [ixgbevf]
 ? rcu_read_lock_sched_held+0x91/0xc0
 ? ixgbevf_ipsec_parse_proto_keys.isra.9+0x280/0x280 [ixgbevf]
 ? lock_acquire+0x191/0x720
 ? bond_ipsec_add_sa+0x48/0x350 [bonding]
 ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
 ? rcu_read_lock_held+0x91/0xa0
 ? rcu_read_lock_sched_held+0xc0/0xc0
 bond_ipsec_add_sa+0x193/0x350 [bonding]
 xfrm_dev_state_add+0x2a9/0x770
 ? memcpy+0x38/0x60
 xfrm_add_sa+0x2278/0x3b10 [xfrm_user]
 ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user]
 ? register_lock_class+0x1750/0x1750
 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user]
 ? rcu_read_lock_sched_held+0x91/0xc0
 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
 ? find_held_lock+0x3a/0x1c0
 ? mutex_lock_io_nested+0x1210/0x1210
 ? sched_clock_cpu+0x18/0x170
 netlink_rcv_skb+0x121/0x350
[ ... ]

Fixes: 272c2330adc9 ("xfrm: bail early on slave pass over skb")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: netdevsim: use xso.real_dev instead of xso.dev in callback functions of struct...
Taehee Yoo [Mon, 5 Jul 2021 15:38:08 +0000 (15:38 +0000)]
net: netdevsim: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops

There are two pointers in struct xfrm_state_offload, *dev, *real_dev.
These are used in callback functions of struct xfrmdev_ops.
The *dev points whether bonding interface or real interface.
If bonding ipsec offload is used, it points bonding interface If not,
it points real interface.
And real_dev always points real interface.
So, netdevsim should always use real_dev instead of dev.
Of course, real_dev always not be null.

Test commands:
    ip netns add A
    ip netns exec A bash
    modprobe netdevsim
    echo "1 1" > /sys/bus/netdevsim/new_device
    ip link add bond0 type bond mode active-backup
    ip link set eth0 master bond0
    ip link set eth0 up
    ip link set bond0 up
    ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \
transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \
dst 14.0.0.70/24 proto tcp offload dev bond0 dir in

Splat looks like:
BUG: spinlock bad magic on CPU#5, kworker/5:1/53
 lock: 0xffff8881068c2cc8, .magic: 11121314, .owner: <none>/-1,
.owner_cpu: -235736076
CPU: 5 PID: 53 Comm: kworker/5:1 Not tainted 5.13.0-rc3+ #1168
Workqueue: events linkwatch_event
Call Trace:
 dump_stack+0xa4/0xe5
 do_raw_spin_lock+0x20b/0x270
 ? rwlock_bug.part.1+0x90/0x90
 _raw_spin_lock_nested+0x5f/0x70
 bond_get_stats+0xe4/0x4c0 [bonding]
 ? rcu_read_lock_sched_held+0xc0/0xc0
 ? bond_neigh_init+0x2c0/0x2c0 [bonding]
 ? dev_get_alias+0xe2/0x190
 ? dev_get_port_parent_id+0x14a/0x360
 ? rtnl_unregister+0x190/0x190
 ? dev_get_phys_port_name+0xa0/0xa0
 ? memset+0x1f/0x40
 ? memcpy+0x38/0x60
 ? rtnl_phys_switch_id_fill+0x91/0x100
 dev_get_stats+0x8c/0x270
 rtnl_fill_stats+0x44/0xbe0
 ? nla_put+0xbe/0x140
 rtnl_fill_ifinfo+0x1054/0x3ad0
[ ... ]

Fixes: 272c2330adc9 ("xfrm: bail early on slave pass over skb")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobonding: fix null dereference in bond_ipsec_add_sa()
Taehee Yoo [Mon, 5 Jul 2021 15:38:07 +0000 (15:38 +0000)]
bonding: fix null dereference in bond_ipsec_add_sa()

If bond doesn't have real device, bond->curr_active_slave is null.
But bond_ipsec_add_sa() dereferences bond->curr_active_slave without
null checking.
So, null-ptr-deref would occur.

Test commands:
    ip link add bond0 type bond
    ip link set bond0 up
    ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi \
0x07 mode transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \
dst 14.0.0.70/24 proto tcp offload dev bond0 dir in

Splat looks like:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 4 PID: 680 Comm: ip Not tainted 5.13.0-rc3+ #1168
RIP: 0010:bond_ipsec_add_sa+0xc4/0x2e0 [bonding]
Code: 85 21 02 00 00 4d 8b a6 48 0c 00 00 e8 75 58 44 ce 85 c0 0f 85 14
01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02
00 0f 85 fc 01 00 00 48 8d bb e0 02 00 00 4d 8b 2c 24 48
RSP: 0018:ffff88810946f508 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff88810b4e8040 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffff8fe34280 RDI: ffff888115abe100
RBP: ffff88810946f528 R08: 0000000000000003 R09: fffffbfff2287e11
R10: 0000000000000001 R11: ffff888115abe0c8 R12: 0000000000000000
R13: ffffffffc0aea9a0 R14: ffff88800d7d2000 R15: ffff88810b4e8330
FS:  00007efc5552e680(0000) GS:ffff888119c00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055c2530dbf40 CR3: 0000000103056004 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 xfrm_dev_state_add+0x2a9/0x770
 ? memcpy+0x38/0x60
 xfrm_add_sa+0x2278/0x3b10 [xfrm_user]
 ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user]
 ? register_lock_class+0x1750/0x1750
 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user]
 ? rcu_read_lock_sched_held+0x91/0xc0
 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
 ? find_held_lock+0x3a/0x1c0
 ? mutex_lock_io_nested+0x1210/0x1210
 ? sched_clock_cpu+0x18/0x170
 netlink_rcv_skb+0x121/0x350
 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
 ? netlink_ack+0x9d0/0x9d0
 ? netlink_deliver_tap+0x17c/0xa50
 xfrm_netlink_rcv+0x68/0x80 [xfrm_user]
 netlink_unicast+0x41c/0x610
 ? netlink_attachskb+0x710/0x710
 netlink_sendmsg+0x6b9/0xb70
[ ...]

Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobonding: fix suspicious RCU usage in bond_ipsec_add_sa()
Taehee Yoo [Mon, 5 Jul 2021 15:38:06 +0000 (15:38 +0000)]
bonding: fix suspicious RCU usage in bond_ipsec_add_sa()

To dereference bond->curr_active_slave, it uses rcu_dereference().
But it and the caller doesn't acquire RCU so a warning occurs.
So add rcu_read_lock().

Test commands:
    ip link add dummy0 type dummy
    ip link add bond0 type bond
    ip link set dummy0 master bond0
    ip link set dummy0 up
    ip link set bond0 up
    ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 \
    mode transport \
    reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
    0x44434241343332312423222114131211f4f3f2f1 128 sel \
    src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp offload \
    dev bond0 dir in

Splat looks like:
=============================
WARNING: suspicious RCU usage
5.13.0-rc3+ #1168 Not tainted
-----------------------------
drivers/net/bonding/bond_main.c:411 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/684:
 #0: ffffffff9a2757c0 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{3:3},
at: xfrm_netlink_rcv+0x59/0x80 [xfrm_user]
   55.191733][  T684] stack backtrace:
CPU: 0 PID: 684 Comm: ip Not tainted 5.13.0-rc3+ #1168
Call Trace:
 dump_stack+0xa4/0xe5
 bond_ipsec_add_sa+0x18c/0x1f0 [bonding]
 xfrm_dev_state_add+0x2a9/0x770
 ? memcpy+0x38/0x60
 xfrm_add_sa+0x2278/0x3b10 [xfrm_user]
 ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user]
 ? register_lock_class+0x1750/0x1750
 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user]
 ? rcu_read_lock_sched_held+0x91/0xc0
 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
 ? find_held_lock+0x3a/0x1c0
 ? mutex_lock_io_nested+0x1210/0x1210
 ? sched_clock_cpu+0x18/0x170
 netlink_rcv_skb+0x121/0x350
 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
 ? netlink_ack+0x9d0/0x9d0
 ? netlink_deliver_tap+0x17c/0xa50
 xfrm_netlink_rcv+0x68/0x80 [xfrm_user]
 netlink_unicast+0x41c/0x610
 ? netlink_attachskb+0x710/0x710
 netlink_sendmsg+0x6b9/0xb70
[ ... ]

Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotcp: fix tcp_init_transfer() to not reset icsk_ca_initialized
Nguyen Dinh Phi [Mon, 5 Jul 2021 23:19:12 +0000 (07:19 +0800)]
tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized

This commit fixes a bug (found by syzkaller) that could cause spurious
double-initializations for congestion control modules, which could cause
memory leaks or other problems for congestion control modules (like CDG)
that allocate memory in their init functions.

The buggy scenario constructed by syzkaller was something like:

(1) create a TCP socket
(2) initiate a TFO connect via sendto()
(3) while socket is in TCP_SYN_SENT, call setsockopt(TCP_CONGESTION),
    which calls:
       tcp_set_congestion_control() ->
         tcp_reinit_congestion_control() ->
           tcp_init_congestion_control()
(4) receive ACK, connection is established, call tcp_init_transfer(),
    set icsk_ca_initialized=0 (without first calling cc->release()),
    call tcp_init_congestion_control() again.

Note that in this sequence tcp_init_congestion_control() is called
twice without a cc->release() call in between. Thus, for CC modules
that allocate memory in their init() function, e.g, CDG, a memory leak
may occur. The syzkaller tool managed to find a reproducer that
triggered such a leak in CDG.

The bug was introduced when that commit 8919a9b31eb4 ("tcp: Only init
congestion control if not initialized already")
introduced icsk_ca_initialized and set icsk_ca_initialized to 0 in
tcp_init_transfer(), missing the possibility for a sequence like the
one above, where a process could call setsockopt(TCP_CONGESTION) in
state TCP_SYN_SENT (i.e. after the connect() or TFO open sendmsg()),
which would call tcp_init_congestion_control(). It did not intend to
reset any initialization that the user had already explicitly made;
it just missed the possibility of that particular sequence (which
syzkaller managed to find).

Fixes: 8919a9b31eb4 ("tcp: Only init congestion control if not initialized already")
Reported-by: syzbot+f1e24a0594d4e3a895d3@syzkaller.appspotmail.com
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoskbuff: Release nfct refcount on napi stolen or re-used skbs
Paul Blakey [Mon, 5 Jul 2021 10:54:51 +0000 (13:54 +0300)]
skbuff: Release nfct refcount on napi stolen or re-used skbs

When multiple SKBs are merged to a new skb under napi GRO,
or SKB is re-used by napi, if nfct was set for them in the
driver, it will not be released while freeing their stolen
head state or on re-use.

Release nfct on napi's stolen or re-used SKBs, and
in gro_list_prepare, check conntrack metadata diff.

Fixes: 5c6b94604744 ("net/mlx5e: CT: Handle misses after executing CT action")
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonetfilter: nft_last: incorrect arithmetics when restoring last used
Pablo Neira Ayuso [Mon, 5 Jul 2021 18:14:21 +0000 (20:14 +0200)]
netfilter: nft_last: incorrect arithmetics when restoring last used

Subtract the jiffies that have passed by to current jiffies to fix last
used restoration.

Fixes: 836382dc2471 ("netfilter: nf_tables: add last expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agonetfilter: nft_last: honor NFTA_LAST_SET on restoration
Pablo Neira Ayuso [Mon, 5 Jul 2021 15:45:36 +0000 (17:45 +0200)]
netfilter: nft_last: honor NFTA_LAST_SET on restoration

NFTA_LAST_SET tells us if this expression has ever seen a packet, do not
ignore this attribute when restoring the ruleset.

Fixes: 836382dc2471 ("netfilter: nf_tables: add last expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agonetfilter: conntrack: Mark access for KCSAN
Manfred Spraul [Sun, 27 Jun 2021 16:19:18 +0000 (18:19 +0200)]
netfilter: conntrack: Mark access for KCSAN

KCSAN detected an data race with ipc/sem.c that is intentional.

As nf_conntrack_lock() uses the same algorithm: Update
nf_conntrack_core as well:

nf_conntrack_lock() contains
  a1) spin_lock()
  a2) smp_load_acquire(nf_conntrack_locks_all).

a1) actually accesses one lock from an array of locks.

nf_conntrack_locks_all() contains
  b1) nf_conntrack_locks_all=true (normal write)
  b2) spin_lock()
  b3) spin_unlock()

b2 and b3 are done for every lock.

This guarantees that nf_conntrack_locks_all() prevents any
concurrent nf_conntrack_lock() owners:
If a thread past a1), then b2) will block until that thread releases
the lock.
If the threat is before a1, then b3)+a1) ensure the write b1) is
visible, thus a2) is guaranteed to see the updated value.

But: This is only the latest time when b1) becomes visible.
It may also happen that b1) is visible an undefined amount of time
before the b3). And thus KCSAN will notice a data race.

In addition, the compiler might be too clever.

Solution: Use WRITE_ONCE().

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agonetfilter: conntrack: add new sysctl to disable RST check
Ali Abdallah [Thu, 27 May 2021 07:19:06 +0000 (09:19 +0200)]
netfilter: conntrack: add new sysctl to disable RST check

This patch adds a new sysctl tcp_ignore_invalid_rst to disable marking
out of segments RSTs as INVALID.

Signed-off-by: Ali Abdallah <aabdallah@suse.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agonetfilter: conntrack: improve RST handling when tuple is re-used
Ali Abdallah [Thu, 20 May 2021 10:53:11 +0000 (12:53 +0200)]
netfilter: conntrack: improve RST handling when tuple is re-used

If we receive a SYN packet in original direction on an existing
connection tracking entry, we let this SYN through because conntrack
might be out-of-sync.

Conntrack gets back in sync when server responds with SYN/ACK and state
gets updated accordingly.

However, if server replies with RST, this packet might be marked as
INVALID because td_maxack value reflects the *old* conntrack state
and not the state of the originator of the RST.

Avoid td_maxack-based checks if previous packet was a SYN.

Unfortunately that is not be enough: an out of order ACK in original
direction updates last_index, so we still end up marking valid RST.

Thus disable the sequence check when we are not in established state and
the received RST has a sequence of 0.

Because marking RSTs as invalid usually leads to unwanted timeouts,
also skip RST sequence checks if a conntrack entry is already closing.

Such entries can already be evicted via GC in case the table is full.

Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Ali Abdallah <aabdallah@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agoMerge branch 'stmmac-ptp'
David S. Miller [Mon, 5 Jul 2021 17:16:18 +0000 (10:16 -0700)]
Merge branch 'stmmac-ptp'

Xiaoliang Yang says:

====================
net: stmmac: re-configure tas basetime after ptp time adjust

If the DWMAC Ethernet device has already set the Qbv EST configuration
before using ptp to synchronize the time adjustment, the Qbv base time
may change to be the past time of the new current time. This is not
allowed by hardware.

This patch calculates and re-configures the Qbv basetime after ptp time
adjustment.

v1->v2:
  Update est mutex lock to protect btr/ctr r/w to be atomic.
  Add btr_reserve to store basetime from qopt and used as origin base
time in Qbv re-configuration.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: stmmac: ptp: update tas basetime after ptp adjust
Xiaoliang Yang [Mon, 5 Jul 2021 10:26:55 +0000 (18:26 +0800)]
net: stmmac: ptp: update tas basetime after ptp adjust

After adjusting the ptp time, the Qbv base time may be the past time
of the new current time. dwmac5 hardware limited the base time cannot
be set as past time. This patch add a btr_reserve to store the base
time get from qopt, then calculate the base time and reset the Qbv
configuration after ptp time adjust.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: stmmac: add mutex lock to protect est parameters
Xiaoliang Yang [Mon, 5 Jul 2021 10:26:54 +0000 (18:26 +0800)]
net: stmmac: add mutex lock to protect est parameters

Add a mutex lock to protect est structure parameters so that the
EST parameters can be updated by other threads.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: stmmac: separate the tas basetime calculation function
Xiaoliang Yang [Mon, 5 Jul 2021 10:26:53 +0000 (18:26 +0800)]
net: stmmac: separate the tas basetime calculation function

Separate the TAS basetime calculation function so that it can be
called by other functions.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoptp: fix format string mismatch in ptp_sysfs.c
Yangbo Lu [Mon, 5 Jul 2021 09:46:17 +0000 (17:46 +0800)]
ptp: fix format string mismatch in ptp_sysfs.c

Fix format string mismatch in ptp_sysfs.c. Use %u for unsigned int.

Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoptp: fix NULL pointer dereference in ptp_clock_register
Yangbo Lu [Mon, 5 Jul 2021 08:53:06 +0000 (16:53 +0800)]
ptp: fix NULL pointer dereference in ptp_clock_register

Fix NULL pointer dereference in ptp_clock_register. The argument
"parent" of ptp_clock_register may be NULL pointer.

Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: marvell: always set skb_shared_info in mvneta_swbm_add_rx_fragment
Lorenzo Bianconi [Sat, 3 Jul 2021 19:17:27 +0000 (21:17 +0200)]
net: marvell: always set skb_shared_info in mvneta_swbm_add_rx_fragment

Always set skb_shared_info data structure in mvneta_swbm_add_rx_fragment
routine even if the fragment contains only the ethernet FCS.

Fixes: 039fbc47f9f1 ("net: mvneta: alloc skb_shared_info on the mvneta_rx_swbm stack")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoudp: properly flush normal packet at GRO time
Paolo Abeni [Fri, 2 Jul 2021 22:38:43 +0000 (00:38 +0200)]
udp: properly flush normal packet at GRO time

If an UDP packet enters the GRO engine but is not eligible
for aggregation and is not targeting an UDP tunnel,
udp_gro_receive() will not set the flush bit, and packet
could delayed till the next napi flush.

Fix the issue ensuring non GROed packets traverse
skb_gro_flush_final().

Reported-and-tested-by: Matthias Treydte <mt@waldheinz.de>
Fixes: 18f25dc39990 ("udp: skip L4 aggregation for UDP tunnel packets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agovmxnet3: fix cksum offload issues for tunnels with non-default udp ports
Ronak Doshi [Fri, 2 Jul 2021 06:44:27 +0000 (23:44 -0700)]
vmxnet3: fix cksum offload issues for tunnels with non-default udp ports

Commit dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload
support") added support for encapsulation offload. However, the inner
offload capability is to be restricted to UDP tunnels with default
Vxlan and Geneve ports.

This patch fixes the issue for tunnels with non-default ports using
features check capability and filtering appropriate features for such
tunnels.

Fixes: dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'nfp-ct-fixes'
David S. Miller [Fri, 2 Jul 2021 20:36:35 +0000 (13:36 -0700)]
Merge branch 'nfp-ct-fixes'

Simon Horman says:

====================
small tc conntrack fixes

Louis Peens says:

The first patch makes sure that any callbacks registered to
the ct->nf_tables table are cleaned up before freeing.

The second patch removes what was effectively a workaround
in the nfp driver because of the missing cleanup in patch 1.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonfp: flower-ct: remove callback delete deadlock
Louis Peens [Fri, 2 Jul 2021 09:21:39 +0000 (11:21 +0200)]
nfp: flower-ct: remove callback delete deadlock

The current location of the callback delete can lead to a race
condition where deleting the callback requires a write_lock on
the nf_table, but at the same time another thread from netfilter
could have taken a read lock on the table before trying to offload.
Since the driver is taking a rtnl_lock this can lead into a deadlock
situation, where the netfilter offload will wait for the cls_flower
rtnl_lock to be released, but this cannot happen since this is
waiting for the nf_table read_lock to be released before it can
delete the callback.

Solve this by completely removing the nf_flow_table_offload_del_cb
call, as this will now be cleaned up by act_ct itself when cleaning
up the specific nf_table.

Fixes: 62268e78145f ("nfp: flower-ct: add nft callback stubs")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/sched: act_ct: remove and free nf_table callbacks
Louis Peens [Fri, 2 Jul 2021 09:21:38 +0000 (11:21 +0200)]
net/sched: act_ct: remove and free nf_table callbacks

When cleaning up the nf_table in tcf_ct_flow_table_cleanup_work
there is no guarantee that the callback list, added to by
nf_flow_table_offload_add_cb, is empty. This means that it is
possible that the flow_block_cb memory allocated will be lost.

Fix this by iterating the list and freeing the flow_block_cb entries
before freeing the nf_table entry (via freeing ct_ft).

Fixes: 978703f42549 ("netfilter: flowtable: Add API for registering to flow table events")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: bridge: sync fdb to new unicast-filtering ports
Wolfgang Bumiller [Fri, 2 Jul 2021 12:07:36 +0000 (14:07 +0200)]
net: bridge: sync fdb to new unicast-filtering ports

Since commit 2796d0c648c9 ("bridge: Automatically manage
port promiscuous mode.")
bridges with `vlan_filtering 1` and only 1 auto-port don't
set IFF_PROMISC for unicast-filtering-capable ports.

Normally on port changes `br_manage_promisc` is called to
update the promisc flags and unicast filters if necessary,
but it cannot distinguish between *new* ports and ones
losing their promisc flag, and new ports end up not
receiving the MAC address list.

Fix this by calling `br_fdb_sync_static` in `br_add_if`
after the port promisc flags are updated and the unicast
filter was supposed to have been filled.

Fixes: 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode.")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agosock: fix error in sock_setsockopt()
Eric Dumazet [Fri, 2 Jul 2021 14:41:01 +0000 (07:41 -0700)]
sock: fix error in sock_setsockopt()

Some tests are failing, John bisected the issue to a recent commit.

sock_set_timestamp() parameters should be :

1) sk
2) optname
3) valbool

Fixes: 371087aa476a ("sock: expose so_timestamp options for mptcp")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: John Sperbeck <jsperbeck@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotcp: annotate data races around tp->mtu_info
Eric Dumazet [Fri, 2 Jul 2021 20:09:03 +0000 (13:09 -0700)]
tcp: annotate data races around tp->mtu_info

While tp->mtu_info is read while socket is owned, the write
sides happen from err handlers (tcp_v[46]_mtu_reduced)
which only own the socket spinlock.

Fixes: 563d34d05786 ("tcp: dont drop MTU reduction indications")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/sched: act_ct: fix err check for nf_conntrack_confirm
wenxu [Fri, 2 Jul 2021 03:34:31 +0000 (11:34 +0800)]
net/sched: act_ct: fix err check for nf_conntrack_confirm

The confirm operation should be checked. If there are any failed,
the packet should be dropped like in ovs and netfilter.

Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agogve: DQO: Remove incorrect prefetch
Bailey Forrest [Fri, 2 Jul 2021 03:13:36 +0000 (20:13 -0700)]
gve: DQO: Remove incorrect prefetch

The prefetch is incorrectly using the dma address instead of the virtual
address.

It's supposed to be:
prefetch((char *)buf_state->page_info.page_address +
 buf_state->page_info.page_offset)

However, after correcting this mistake, there is no evidence of
performance improvement.

Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path")
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: ipv6: fix return value of ip6_skb_dst_mtu
Vadim Fedorenko [Thu, 1 Jul 2021 23:47:00 +0000 (02:47 +0300)]
net: ipv6: fix return value of ip6_skb_dst_mtu

Commit 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") introduced
ip6_skb_dst_mtu with return value of signed int which is inconsistent
with actually returned values. Also 2 users of this function actually
assign its value to unsigned int variable and only __xfrm6_output
assigns result of this function to signed variable but actually uses
as unsigned in further comparisons and calls. Change this function
to return unsigned int value.

Fixes: 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agogve: Simplify code and axe the use of a deprecated API
Christophe JAILLET [Thu, 1 Jul 2021 20:41:19 +0000 (22:41 +0200)]
gve: Simplify code and axe the use of a deprecated API

The wrappers in include/linux/pci-dma-compat.h should go away.

Replace 'pci_set_dma_mask/pci_set_consistent_dma_mask' by an equivalent
and less verbose 'dma_set_mask_and_coherent()' call.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/sched: sch_taprio: fix typo in comment
Jesper Dangaard Brouer [Thu, 1 Jul 2021 13:16:53 +0000 (15:16 +0200)]
net/sched: sch_taprio: fix typo in comment

I have checked that the IEEE standard 802.1Q-2018 section 8.6.9.4.5
is called AdminGateStates.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonetfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo
Vasily Averin [Thu, 1 Jul 2021 05:02:49 +0000 (08:02 +0300)]
netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo

Two patches listed below removed ctnetlink_dump_helpinfo call from under
rcu_read_lock. Now its rcu_dereference generates following warning:
=============================
WARNING: suspicious RCU usage
5.13.0+ #5 Not tainted
-----------------------------
net/netfilter/nf_conntrack_netlink.c:221 suspicious rcu_dereference_check() usage!

other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
stack backtrace:
CPU: 1 PID: 2251 Comm: conntrack Not tainted 5.13.0+ #5
Call Trace:
 dump_stack+0x7f/0xa1
 ctnetlink_dump_helpinfo+0x134/0x150 [nf_conntrack_netlink]
 ctnetlink_fill_info+0x2c2/0x390 [nf_conntrack_netlink]
 ctnetlink_dump_table+0x13f/0x370 [nf_conntrack_netlink]
 netlink_dump+0x10c/0x370
 __netlink_dump_start+0x1a7/0x260
 ctnetlink_get_conntrack+0x1e5/0x250 [nf_conntrack_netlink]
 nfnetlink_rcv_msg+0x613/0x993 [nfnetlink]
 netlink_rcv_skb+0x50/0x100
 nfnetlink_rcv+0x55/0x120 [nfnetlink]
 netlink_unicast+0x181/0x260
 netlink_sendmsg+0x23f/0x460
 sock_sendmsg+0x5b/0x60
 __sys_sendto+0xf1/0x160
 __x64_sys_sendto+0x24/0x30
 do_syscall_64+0x36/0x70
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 49ca022bccc5 ("netfilter: ctnetlink: don't dump ct extensions of unconfirmed conntracks")
Fixes: 0b35f6031a00 ("netfilter: Remove duplicated rcu_read_lock.")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agonetfilter: conntrack: nf_ct_gre_keymap_flush() removal
Vasily Averin [Thu, 1 Jul 2021 05:02:24 +0000 (08:02 +0300)]
netfilter: conntrack: nf_ct_gre_keymap_flush() removal

nf_ct_gre_keymap_flush() is useless.
It is called from nf_conntrack_cleanup_net_list() only and tries to remove
nf_ct_gre_keymap entries from pernet gre keymap list. Though:
a) at this point the list should already be empty, all its entries were
deleted during the conntracks cleanup, because
nf_conntrack_cleanup_net_list() executes nf_ct_iterate_cleanup(kill_all)
before nf_conntrack_proto_pernet_fini():
 nf_conntrack_cleanup_net_list
  +- nf_ct_iterate_cleanup
  |   nf_ct_put
  |    nf_conntrack_put
  |     nf_conntrack_destroy
  |      destroy_conntrack
  |       destroy_gre_conntrack
  |        nf_ct_gre_keymap_destroy
  `- nf_conntrack_proto_pernet_fini
      nf_ct_gre_keymap_flush

b) Let's say we find that the keymap list is not empty. This means netns
still has a conntrack associated with gre, in which case we should not free
its memory, because this will lead to a double free and related crashes.
However I doubt it could have gone unnoticed for years, obviously
this does not happen in real life. So I think we can remove
both nf_ct_gre_keymap_flush() and nf_conntrack_proto_pernet_fini().

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agonetfilter: nf_tables: Fix dereference of null pointer flow
Colin Ian King [Thu, 24 Jun 2021 19:57:18 +0000 (20:57 +0100)]
netfilter: nf_tables: Fix dereference of null pointer flow

In the case where chain->flags & NFT_CHAIN_HW_OFFLOAD is false then
nft_flow_rule_create is not called and flow is NULL. The subsequent
error handling execution via label err_destroy_flow_rule will lead
to a null pointer dereference on flow when calling nft_flow_rule_destroy.
Since the error path to err_destroy_flow_rule has to cater for null
and non-null flows, only call nft_flow_rule_destroy if flow is non-null
to fix this issue.

Addresses-Coverity: ("Explicity null dereference")
Fixes: 3c5e44622011 ("netfilter: nf_tables: memleak in hw offload abort path")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agonetfilter: conntrack: do not renew entry stuck in tcp SYN_SENT state
Florian Westphal [Thu, 24 Jun 2021 10:36:42 +0000 (12:36 +0200)]
netfilter: conntrack: do not renew entry stuck in tcp SYN_SENT state

Consider:
  client -----> conntrack ---> Host

client sends a SYN, but $Host is unreachable/silent.
Client eventually gives up and the conntrack entry will time out.

However, if the client is restarted with same addr/port pair, it
may prevent the conntrack entry from timing out.

This is noticeable when the existing conntrack entry has no NAT
transformation or an outdated one and port reuse happens either
on client or due to a NAT middlebox.

This change prevents refresh of the timeout for SYN retransmits,
so entry is going away after nf_conntrack_tcp_timeout_syn_sent
seconds (default: 60).

Entry will be re-created on next connection attempt, but then
nat rules will be evaluated again.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agoselftest: netfilter: add test case for unreplied tcp connections
Florian Westphal [Thu, 24 Jun 2021 10:36:41 +0000 (12:36 +0200)]
selftest: netfilter: add test case for unreplied tcp connections

TCP connections in UNREPLIED state (only SYN seen) can be kept alive
indefinitely, as each SYN re-sets the timeout.

This means that even if a peer has closed its socket the entry
never times out.

This also prevents re-evaluation of configured NAT rules.
Add a test case that sets SYN timeout to 10 seconds, then check
that the nat redirection added later eventually takes effect.

This is based off a repro script from Antonio Ojea.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agos390: iucv: Avoid field over-reading memcpy()
Kees Cook [Thu, 1 Jul 2021 15:44:07 +0000 (17:44 +0200)]
s390: iucv: Avoid field over-reading memcpy()

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.

Add a wrapping struct to serve as the memcpy() source so the compiler
can perform appropriate bounds checking, avoiding this future warning:

In function '__fortify_memcpy',
    inlined from 'iucv_message_pending' at net/iucv/iucv.c:1663:4:
./include/linux/fortify-string.h:246:4: error: call to '__read_overflow2_field' declared with attribute error: detected read beyond size of field (2nd parameter)

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agogve: Propagate error codes to caller
Christophe JAILLET [Thu, 1 Jul 2021 20:18:37 +0000 (22:18 +0200)]
gve: Propagate error codes to caller

If 'gve_probe()' fails, we should propagate the error code, instead of
hard coding a -ENXIO value.
Make sure that all error handling paths set a correct value for 'err'.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agogve: Fix an error handling path in 'gve_probe()'
Christophe JAILLET [Thu, 1 Jul 2021 20:18:24 +0000 (22:18 +0200)]
gve: Fix an error handling path in 'gve_probe()'

If the 'register_netdev() call fails, we must release the resources
allocated by the previous 'gve_init_priv()' call, as already done in the
remove function.

Add a new label and the missing 'gve_teardown_priv_resources()' in the
error handling path.

Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/t
David S. Miller [Thu, 1 Jul 2021 21:39:28 +0000 (14:39 -0700)]
Merge branch '1GbE' of git://git./linux/kernel/git/t
nguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-07-01

This series contains updates to igb, igc, ixgbe, e1000e, fm10k, and iavf
drivers.

Vinicius fixes a use-after-free issue present in igc and igb.

Tom Rix fixes the return value for igc_read_phy_reg() when the
operation is not supported for igc.

Christophe Jaillet fixes unrolling of PCIe error reporting for ixgbe,
igc, igb, fm10k, e10000e, and iavf.

Alex ensures that q_vector array is not accessed beyond its bounds for
igb.

Jedrzej moves ring assignment to occur after bounds have been checked in
igb.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: stmmac: Terminate FPE workqueue in suspend
Mohammad Athari Bin Ismail [Wed, 30 Jun 2021 09:59:35 +0000 (17:59 +0800)]
net: stmmac: Terminate FPE workqueue in suspend

Add stmmac_fpe_stop_wq() in stmmac_suspend() to terminate FPE workqueue
during suspend. So, in suspend mode, there will be no FPE workqueue
available. Without this fix, new additional FPE workqueue will be created
in every suspend->resume cycle.

Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'sms911x-dts'
David S. Miller [Thu, 1 Jul 2021 20:27:11 +0000 (13:27 -0700)]
Merge branch 'sms911x-dts'

Geert Uytterhoeven says:

====================
sms911x: DTS fixes and DT binding to json-schema conversion

This patch series converts the Smart Mixed-Signal Connectivity (SMSC)
LAN911x/912x Controller Device Tree binding documentation to
json-schema, after fixing a few issues in DTS files.

Changed compared to v1[1]:
  - Dropped applied patches,
  - Add Reviewed-by,
  - Drop bogus double quotes in compatible values,
  - Add comment explaining why "additionalProperties: true" is needed.

[1] [PATCH 0/5] sms911x: DTS fixes and DT binding to json-schema conversion
    https://lore.kernel.org/r/cover.1621518686.git.geert+renesas@glider.be
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agodt-bindings: net: sms911x: Convert to json-schema
Geert Uytterhoeven [Thu, 1 Jul 2021 12:02:21 +0000 (14:02 +0200)]
dt-bindings: net: sms911x: Convert to json-schema

Convert the Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x
Controller Device Tree binding documentation to json-schema.

Document missing properties.
Make "phy-mode" not required, as many DTS files do not have it, and the
Linux drivers falls back to PHY_INTERFACE_MODE_NA.
Correct nodename in example.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoARM: dts: qcom-apq8060: Correct Ethernet node name and drop bogus irq property
Geert Uytterhoeven [Thu, 1 Jul 2021 12:02:20 +0000 (14:02 +0200)]
ARM: dts: qcom-apq8060: Correct Ethernet node name and drop bogus irq property

make dtbs_check:

    ethernet-ebi2@2,0: $nodename:0: 'ethernet-ebi2@2,0' does not match '^ethernet(@.*)?$'
    ethernet-ebi2@2,0: 'smsc,irq-active-low' does not match any of the regexes: 'pinctrl-[0-9]+'

There is no "smsc,irq-active-low" property, as active low is the
default.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoudp: annotate data races around unix_sk(sk)->gso_size
Eric Dumazet [Wed, 30 Jun 2021 16:42:44 +0000 (09:42 -0700)]
udp: annotate data races around unix_sk(sk)->gso_size

Accesses to unix_sk(sk)->gso_size are lockless.
Add READ_ONCE()/WRITE_ONCE() around them.

BUG: KCSAN: data-race in udp_lib_setsockopt / udpv6_sendmsg

write to 0xffff88812d78f47c of 2 bytes by task 10849 on cpu 1:
 udp_lib_setsockopt+0x3b3/0x710 net/ipv4/udp.c:2696
 udpv6_setsockopt+0x63/0x90 net/ipv6/udp.c:1630
 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3265
 __sys_setsockopt+0x18f/0x200 net/socket.c:2104
 __do_sys_setsockopt net/socket.c:2115 [inline]
 __se_sys_setsockopt net/socket.c:2112 [inline]
 __x64_sys_setsockopt+0x62/0x70 net/socket.c:2112
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88812d78f47c of 2 bytes by task 10852 on cpu 0:
 udpv6_sendmsg+0x161/0x16b0 net/ipv6/udp.c:1299
 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:642
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2337
 ___sys_sendmsg net/socket.c:2391 [inline]
 __sys_sendmmsg+0x315/0x4b0 net/socket.c:2477
 __do_sys_sendmmsg net/socket.c:2506 [inline]
 __se_sys_sendmmsg net/socket.c:2503 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2503
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x0000 -> 0x0005

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 10852 Comm: syz-executor.0 Not tainted 5.13.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotcp: consistently disable header prediction for mptcp
Paolo Abeni [Wed, 30 Jun 2021 11:42:13 +0000 (13:42 +0200)]
tcp: consistently disable header prediction for mptcp

The MPTCP receive path is hooked only into the TCP slow-path.
The DSS presence allows plain MPTCP traffic to hit that
consistently.

Since commit e1ff9e82e2ea ("net: mptcp: improve fallback to TCP"),
when an MPTCP socket falls back to TCP, it can hit the TCP receive
fast-path, and delay or stop triggering the event notification.

Address the issue explicitly disabling the header prediction
for MPTCP sockets.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/200
Fixes: e1ff9e82e2ea ("net: mptcp: improve fallback to TCP")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: remove the caif_hsi driver
Christoph Hellwig [Thu, 1 Jul 2021 08:15:09 +0000 (10:15 +0200)]
net: remove the caif_hsi driver

The caif_hsi driver relies on a cfhsi_get_ops symbol using symbol_get,
but this symbol is not provided anywhere in the kernel tree.  Remove
this driver given that it is dead code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoDocumentation: add more details in tipc.rst
Xin Long [Thu, 1 Jul 2021 00:18:20 +0000 (20:18 -0400)]
Documentation: add more details in tipc.rst

kernel-doc for TIPC is too simple, we need to add more information for it.

This patch is to extend the abstract, and add the Features and Links items.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoibmvnic: retry reset if there are no other resets
Sukadev Bhattiprolu [Wed, 30 Jun 2021 18:36:17 +0000 (14:36 -0400)]
ibmvnic: retry reset if there are no other resets

Normally, if a reset fails due to failover or other communication error
there is another reset (eg: FAILOVER) in the queue and we would process
that reset. But if we are unable to communicate with PHYP or VIOS after
H_FREE_CRQ, there would be no other resets in the queue and the adapter
would be in an undefined state even though it was in the OPEN state
earlier. While starting the reset we set the carrier to off state so
we won't even get the timeout resets.

If the last queued reset fails, retry it as a hard reset (after the
usual 60 second settling time).

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'ptp-virtual-clocks-and-timestamping'
David S. Miller [Thu, 1 Jul 2021 20:08:19 +0000 (13:08 -0700)]
Merge branch 'ptp-virtual-clocks-and-timestamping'

Yangbo Lu says:

====================
ptp: support virtual clocks and timestamping

Current PTP driver exposes one PTP device to user which binds network
interface/interfaces to provide timestamping. Actually we have a way
utilizing timecounter/cyclecounter to virtualize any number of PTP
clocks based on a same free running physical clock for using.
The purpose of having multiple PTP virtual clocks is for user space
to directly/easily use them for multiple domains synchronization.

user
space:     ^                                  ^
           | SO_TIMESTAMPING new flag:        | Packets with
           | SOF_TIMESTAMPING_BIND_PHC        | TX/RX HW timestamps
           v                                  v
         +--------------------------------------------+
sock:    |     sock (new member sk_bind_phc)          |
         +--------------------------------------------+
           ^                                  ^
           | ethtool_get_phc_vclocks          | Convert HW timestamps
           |                                  | to sk_bind_phc
           v                                  v
         +--------------+--------------+--------------+
vclock:  | ptp1         | ptp2         | ptpN         |
         +--------------+--------------+--------------+
pclock:  |             ptp0 free running              |
         +--------------------------------------------+

The block diagram may explain how it works. Besides the PTP virtual
clocks, the packet HW timestamp converting to the bound PHC is also
done in sock driver. For user space, PTP virtual clocks can be
created via sysfs, and extended SO_TIMESTAMPING API (new flag
SOF_TIMESTAMPING_BIND_PHC) can be used to bind one PTP virtual clock
for timestamping.

The test tool timestamping.c (together with linuxptp phc_ctl tool) can
be used to verify:

  # echo 4 > /sys/class/ptp/ptp0/n_vclocks
  [  129.399472] ptp ptp0: new virtual clock ptp2
  [  129.404234] ptp ptp0: new virtual clock ptp3
  [  129.409532] ptp ptp0: new virtual clock ptp4
  [  129.413942] ptp ptp0: new virtual clock ptp5
  [  129.418257] ptp ptp0: guarantee physical clock free running
  #
  # phc_ctl /dev/ptp2 set 10000
  # phc_ctl /dev/ptp3 set 20000
  #
  # timestamping eno0 2 SOF_TIMESTAMPING_TX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC
  # timestamping eno0 2 SOF_TIMESTAMPING_RX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC
  # timestamping eno0 3 SOF_TIMESTAMPING_TX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC
  # timestamping eno0 3 SOF_TIMESTAMPING_RX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC

Changes for v2:
- Converted to num_vclocks for creating virtual clocks.
- Guranteed physical clock free running when using virtual
  clocks.
- Fixed build warning.
- Updated copyright.
Changes for v3:
- Supported PTP virtual clock in default in PTP driver.
- Protected concurrency of ptp->num_vclocks accessing.
- Supported PHC vclocks query via ethtool.
- Extended SO_TIMESTAMPING API for PHC binding.
- Converted HW timestamps to PHC bound, instead of previous
  binding domain value to PHC idea.
- Other minor fixes.
Changes for v4:
- Used do_aux_work callback for vclock refreshing instead.
- Used unsigned int for vclocks number, and max_vclocks
  for limitiation.
- Fixed mutex locking.
- Dynamically allocated memory for vclock index storage.
- Removed ethtool ioctl command for vclocks getting.
- Updated doc for ethtool phc vclocks get.
- Converted to mptcp_setsockopt_sol_socket_timestamping().
- Passed so_timestamping for sock_set_timestamping.
- Fixed checkpatch/build.
- Other minor fixed.
Changes for v5:
- Fixed checkpatch/build/bug reported by test robot.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMAINTAINERS: add entry for PTP virtual clock driver
Yangbo Lu [Wed, 30 Jun 2021 08:12:02 +0000 (16:12 +0800)]
MAINTAINERS: add entry for PTP virtual clock driver

Add entry for PTP virtual clock driver.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoselftests/net: timestamping: support binding PHC
Yangbo Lu [Wed, 30 Jun 2021 08:12:01 +0000 (16:12 +0800)]
selftests/net: timestamping: support binding PHC

Support binding PHC of PTP vclock for timestamping.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: socket: support hardware timestamp conversion to PHC bound
Yangbo Lu [Wed, 30 Jun 2021 08:12:00 +0000 (16:12 +0800)]
net: socket: support hardware timestamp conversion to PHC bound

This patch is to support hardware timestamp conversion to
PHC bound. This applies to both RX and TX since their skb
handling (for TX, it's skb clone in error queue) all goes
through __sock_recv_timestamp.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: sock: extend SO_TIMESTAMPING for PHC binding
Yangbo Lu [Wed, 30 Jun 2021 08:11:59 +0000 (16:11 +0800)]
net: sock: extend SO_TIMESTAMPING for PHC binding

Since PTP virtual clock support is added, there can be
several PTP virtual clocks based on one PTP physical
clock for timestamping.

This patch is to extend SO_TIMESTAMPING API to support
PHC (PTP Hardware Clock) binding by adding a new flag
SOF_TIMESTAMPING_BIND_PHC. When PTP virtual clocks are
in use, user space can configure to bind one for
timestamping, but PTP physical clock is not supported
and not needed to bind.

This patch is preparation for timestamp conversion from
raw timestamp to a specific PTP virtual clock time in
core net.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomptcp: setsockopt: convert to mptcp_setsockopt_sol_socket_timestamping()
Yangbo Lu [Wed, 30 Jun 2021 08:11:58 +0000 (16:11 +0800)]
mptcp: setsockopt: convert to mptcp_setsockopt_sol_socket_timestamping()

Split timestamping handling into a new function
mptcp_setsockopt_sol_socket_timestamping().
This is preparation for extending SO_TIMESTAMPING
for PHC binding, since optval will no longer be
integer.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoptp: add kernel API ptp_convert_timestamp()
Yangbo Lu [Wed, 30 Jun 2021 08:11:57 +0000 (16:11 +0800)]
ptp: add kernel API ptp_convert_timestamp()

Add kernel API ptp_convert_timestamp() to convert raw hardware timestamp
to a specified ptp vclock time.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoethtool: add a new command for getting PHC virtual clocks
Yangbo Lu [Wed, 30 Jun 2021 08:11:56 +0000 (16:11 +0800)]
ethtool: add a new command for getting PHC virtual clocks

Add an interface for getting PHC (PTP Hardware Clock)
virtual clocks, which are based on PHC physical clock
providing hardware timestamp to network packets.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoptp: add kernel API ptp_get_vclocks_index()
Yangbo Lu [Wed, 30 Jun 2021 08:11:55 +0000 (16:11 +0800)]
ptp: add kernel API ptp_get_vclocks_index()

Add kernel API ptp_get_vclocks_index() to get all ptp
vclocks index on pclock.

This is preparation for supporting ptp vclocks info query
through ethtool.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoptp: track available ptp vclocks information
Yangbo Lu [Wed, 30 Jun 2021 08:11:54 +0000 (16:11 +0800)]
ptp: track available ptp vclocks information

Track available ptp vclocks information. Record index values
of available ptp vclocks during registering and unregistering.

This is preparation for supporting ptp vclocks info query
through ethtool.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoptp: support ptp physical/virtual clocks conversion
Yangbo Lu [Wed, 30 Jun 2021 08:11:53 +0000 (16:11 +0800)]
ptp: support ptp physical/virtual clocks conversion

Support ptp physical/virtual clocks conversion via sysfs.
There will be a new attribute n_vclocks under ptp physical
clock sysfs.

- In default, the value is 0 meaning only ptp physical clock
  is in use.
- Setting the value can create corresponding number of ptp
  virtual clocks to use. But current physical clock is guaranteed
  to stay free running.
- Setting the value back to 0 can delete virtual clocks and back
  use physical clock again.

Another new attribute max_vclocks control the maximum number of
ptp vclocks.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoptp: add ptp virtual clock driver framework
Yangbo Lu [Wed, 30 Jun 2021 08:11:52 +0000 (16:11 +0800)]
ptp: add ptp virtual clock driver framework

This patch is to add ptp virtual clock driver framework
utilizing timecounter/cyclecounter.

The patch just exports two essential APIs for PTP driver.

- ptp_vclock_register()
- ptp_vclock_unregister()

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'wwan-iosm-fixes'
David S. Miller [Thu, 1 Jul 2021 20:04:41 +0000 (13:04 -0700)]
Merge branch 'wwan-iosm-fixes'

M Chetan Kumar says:

====================
net: wwan: iosm: fixes

This patch series contains IOSM Driver fixes and details are
are mentioned below.

Patch1: Corrects uevent reporting format key=value pair.
Patch2: Removes redundant IP session checks.
Patch3: Correct link-Id number to be in sycn with MBIM session Id.
Patch4: Update netdev tx stats.
Patch5: Set netdev default mtu size.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: wwan: iosm: set default mtu
M Chetan Kumar [Thu, 1 Jul 2021 15:09:34 +0000 (20:39 +0530)]
net: wwan: iosm: set default mtu

Set netdev default mtu size to 1500.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: wwan: iosm: fix netdev tx stats
M Chetan Kumar [Thu, 1 Jul 2021 15:09:17 +0000 (20:39 +0530)]
net: wwan: iosm: fix netdev tx stats

Update tx stats on successful packet consume, drop.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: wwan: iosm: correct link-id handling
M Chetan Kumar [Thu, 1 Jul 2021 15:07:45 +0000 (20:37 +0530)]
net: wwan: iosm: correct link-id handling

Link ID to be kept intact with MBIM session ID
Ex: ID 0 should be associated to MBIM session ID 0.

Reported-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>