drm/amdgpu: Use vm status_lock to protect vm moved list

Use vm_status_lock to protect all vm_status state transitions to allow
them to happen without a reservation lock in unlocked page table
updates.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use vm status_lock to protect vm idle list

Use vm_status_lock to protect all vm_status state transitions to allow
them to happen without a reservation lock in unlocked page table
updates.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use vm status_lock to protect relocated list

Use vm_status_lock to protect all vm_status state transitions to allow
them to happen without a reservation lock in unlocked page table
updates.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Rename vm invalidate lock to status_lock

The vm status_lock will be used to protect all vm status lists.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Remove unneeded result variable

Return the value atomctrl_initialize_mc_reg_table_v2_2() directly instead
of storing it in another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Remove the unneeded result variable

Return the value append_vbios_pptable() directly instead of storing it in
another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix initial connector audio value

This got lost somewhere along the way, This fixes
audio not working until set_property was called.

Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce number of arguments of dml314's CalculateFlipSchedule()

Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml314_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with
LLVM 16 (1976 -> 1864), helping clear up the following clang warning:

  drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_mode_vba_314.c:4020:6: error: stack frame size (2216) exceeds limit (2048) in 'dml314_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
  void dml314_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
       ^
  1 error generated.

Link: https://github.com/ClangBuiltLinux/linux/issues/1710
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce number of arguments of dml314's CalculateWatermarksAndDRAMSpeedChangeSupport()

Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml314_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with
LLVM 16 (2216 -> 1976), helping clear up the following clang warning:

  drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_mode_vba_314.c:4020:6: error: stack frame size (2216) exceeds limit (2048) in 'dml314_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
  void dml314_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
       ^
  1 error generated.

Link: https://github.com/ClangBuiltLinux/linux/issues/1710
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: don't register a dirty callback for non-atomic

Some asics still support non-atomic code paths.

Fixes: 66f99628eb2440 ("drm/amdgpu: use dirty framebuffer helper")
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: bump minor for gang submit

Since that has now landed bump the minor to let userspace know about it.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: properly initialize return value during CS

The return value is no longer initialized before the loop because of
moving code around.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: c2b08e7a6d27 ("drm/amdgpu: move entity selection and job init earlier during CS")
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop the pptable related workarounds for SMU 13.0.0

The pptable in the vbios is fully ready. The related workarounds
in driver are not needed any more.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add support for 3794 pptable for SMU13.0.0

Enable 3794 pptable support for SMU13.0.0.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add gang submit frontend v6

Allows submitting jobs as gang which needs to run on multiple engines at the
same time.

All members of the gang get the same implicit, explicit and VM dependencies. So
no gang member will start running until everything else is ready.

The last job is considered the gang leader (usually a submission to the GFX
ring) and used for signaling output dependencies.

Each job is remembered individually as user of a buffer object, so there is no
joining of work at the end.

v2: rebase and fix review comments from Andrey and Yogesh
v3: use READ instead of BOOKKEEP for now because of VM unmaps, set gang
    leader only when necessary
v4: fix order of pushing jobs and adding fences found by Trigger.
v5: fix job index calculation and adding IBs to jobs
v6: fix typo found by Alex

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add gang submit backend v2

Allows submitting jobs as gang which needs to run on multiple
engines at the same time.

Basic idea is that we have a global gang submit fence representing when the
gang leader is finally pushed to run on the hardware last.

Jobs submitted as gang are never re-submitted in case of a GPU reset since this
won't work and will just deadlock the hardware immediately again.

v2: fix logic inversion, improve documentation, fix rcu

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup instance limit on VCN4 v4

Similar to what we did for VCN3 use the job instead of the parser
entity. Cleanup the coding style quite a bit as well.

v2: merge improved application check into this patch
v3: finally fix the check
v4: limit to the correct engine

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: getting fan speed pwm for vega10 properly

Instead of using RPM speed, we will use a function from vega20 based on PWM registers.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Yury Zhuravlev <stalkerg@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: revert "fix limiting AV1 to the first instance on VCN3" v3

This reverts commit 250195ff744f260c169f5427422b6f39c58cb883.

The job should now be initialized when we reach the parser functions.

v2: merge improved application check into this patch
v3: back to the original test, but use the right ring

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move entity selection and job init earlier during CS

Initialize the entity for the CS and scheduler job much earlier.

v2: fix job initialisation order and use correct scheduler instance

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup error handling in amdgpu_cs_parser_bos

Return early on success and so remove all those "if (r)" in the error
path.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: cleanup CS pass2 v6

Cleanup the coding style and function names to represent the data
they process for pass2 as well.

Go over the chunks only twice now instead of multiple times.

v2: fix job initialisation order and use correct scheduler instance
v3: try to move all functional changes into a separate patch.
v4: separate reordering, pass1 and pass2 change
v5: fix va_start calculation
v6: fix user fence check

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Remove redundant check condition

V3:
[Why]:
  Since ASICs using smu v13_0_2 have called smu
.suspend before calling amdgpu_pm_sysfs_fini,
pm.dpm_enabled was already set to 0 when smu
.suspend was called. This makes it impossible
to delete all pm sys nodes.

[How]:
  Since all functions in amdgpu_pm_sysfs_fini
have their own condition checks, so the first
conditional check in amdgpu_pm_sysfs_fini can
be removed.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fixed psp fence and memory issues when removing amdgpu device

V3:
Fixed psp fence and memory issues for the asic
using smu v13_0_2 when removing amdgpu device.

[Why]:
1. psp_suspend->psp_free_shared_bufs->
       psp_ta_free_shared_buf->
           amdgpu_bo_free_kernel->
             ...->amdgpu_bo_release_notify->
                    amdgpu_fill_buffer
   psp will free vram memory used by psp when psp_suspend
   is called. But for the asic using smu v13_0_2, because
   psp_suspend is called before adev->shutdown is set to
   true when removing the first hive device, amdgpu fill_buffer
   will be called, which will cause fence issues when evicting
   all vram resources in amdgpu vram mgr_fini.
2. Since psp_hw_fini is not called after calling psp_suspend
   and psp_suspend only calls psp_ring_stop, the psp ring memory
   will not be released when amdgpu device is removed.

[How]:
1. Set shutdown to true before calling amdgpu_device_gpu_recover,
   then amdgpu_fill_buffer will not be called when psp_suspend is
   called.
2. Free psp ring memory in psp_sw_fini.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Adjust removal control flow for smu v13_0_2

Adjust removal control flow for smu v13_0_2:
   During amdgpu uninstallation, when removing the first
device, the kernel needs to first send a mode1reset message
to all gpu devices. Otherwise, smu initialization will fail
the next time amdgpu is installed.

V2:
1. Update commit comments.
2. Remove the global variable amdgpu_device_remove_cnt
   and add a variable to the structure amdgpu_hive_info.
3. Use hive to detect the first removed device instead of
   a global variable.

V3:
 1. Update commit comments.
 2. Split a patch into multiple patches.
 3. The current patch does:
    a. Add a work mode of AMDGPU_RESET_FOR_DEVICE_REMOVE into
       the existing gpu recover path, which make all devices
       in hive list only have HW reset but no resume (except
       the base IP).
    b. Call AMDGPU_RESET_FOR_DEVICE_REMOVE and
       AMDGPU_NEED_FULL_RESET mode of amdgpu_device_gpu_recover
       in amdgpu_pci_remove when removing the first device in
       hive list.
    c. When removing the first device, the IP blocks keyword
       function call sequence is as follows:
.suspend->mode1reset->.resume(basic ip)->.hw_fini->.early_fini->.sw_fini.
   ^                           |
   |-<----------<---------<----|
The first three sequences are because of a call to
        amdgpu_device_gpu_recover. The three sequences will be
        executed in a loop until all devices in the hive list
        are iterated.
        The sequences starting from .hw_fini only apply to the
        first device. Since .suspend has been called before,
        except the resumed phase1 basic ip blocks, all other ip
        blocks .hw_fini of current device will do nothing.
     d. When removing other devices, the calling sequences is the
        same as legacy:
   .hw_fini -> .early_fini -> .sw_fini.
Since .suspend has been called when removing the first device,
        except the resumed phase1 basic ip blocks, all of other ip
        blocks .hw_fini of current device will do nothing.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.204

This version brings along following fixes:
- Fix urgent latency override for DCN32/DCN321
- Correct hostvm flag in DCN31
- Added new Asic Id for DCN301
- Adjust to 2 phys in DCN301
- Update dummy P-state search to use DCN32 DML
- Increase dcn315 pstate change latency
- Disable OTG WA for the plane_state NULL case on DCN314
- Update dccg based on HW delta
- Correct num_dsc for DCN314
- Fix DP DSC compliance failure with DCN314
- Refactor edp power sequencer codes
- update gamut remap if plane has changed
- Skip audio setup when audio stream is enabled
- Display distortion after hotplug LG Ultrafine 5K tiled display
- Fix DP MST timeslot issue when fallback happened
- Uncomment SubVP pipe split assignment in driver
- Enable committing subvp config
- Do second pass through DML for DET calculation
- Don't allocate DET for phantom pipes
- Modify DML to adjust Vstartup Position
- Ignore k1/k2 values for virtual signal to avoid assert
- Fix failures of disabling primary planes
- Do not compare integers of different widths
- Fix empty slot problem of EDID management
- Revise Sink device string ID width in dmub psr
- Log vertical interrupt 1 for debug

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: correct num_dsc based on HW cap

[why]
num_dsc is 3 for dcn314 based on HW capablity.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: solve regression in update phy state refactor

[Why]
There is a coding error when moving dp disable link phy to
hw sequencer, where the receiver power control is missed during
this refactor.

[how]
1. Add back missing receiver power control in disable link phy.
2. minor modifications to ensure there is no undesired sequence
changes in dp link enable/disable.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update dccg based on HW delta

[why]
update hw dccg based on HW delta, and reuse common src code

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Do second pass through DML for DET calculation

[Why & How]
If we find that DML requires pipe split, run through
DML again because the DET allocation per pipe must
be re-assigned.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: log vertical interrupt 1 for debug

[Why & How]
Extend existing OTG state collection function to include the vertical
interrupt 1 state.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revise Sink device string ID

[Why]
The Sink device string ID1/ID2 use 5 bytes instead of 6 bytes,
so the driver should compare the first 5 bytes only.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Robin Chen <po-tchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Modify DML to adjust Vstartup Position

[WHY]
The Vstartup position should be as late as possible to
maximize power saving with the current. Calculation of
Vstartup in DML does not take into account as SDP signal.

[HOW]
Made necessary changes to calculate the correct Vstartup
position in DML to account for AS SDP
* Overriding the VBlankNom value in certain cases
  otherwise it will use the default value
* Bypassing the condition for adjust_sync_Vstartup
* Overriding vblank_nom_input with VBlankNom that is
  set in the SW Layer

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: muansari <muansari@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable OTG WA for the plane_state NULL case on DCN314

[Why]
This shouldn't trigger during tiled display hotplug/unplug but it does
because one of the tiles can end up with a NULL plane state.

This also doesn't guard against the hang that it was originally trying
to resolve, and can instead cause DIO corruption due to OTG sync
being lost.

[How]
This was reverted at one point out of DCN31 so revert it here too.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add shift and mask for ICH_RESET_AT_END_OF_LINE

[Why]
DP DSC compliance failing for dcn314 due to ICH_RESET_AT_END_OF_LINE
shift and mask being missing

[How]
Add in shift and mask for ICH_RESET_AT_END_OF_LINE

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable committing subvp config

[Why and How]
Enable committing subvp config through DMCUB for DCN32

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Assume connectors are on single slot

[Why]
v1_5 display object table has no way for connectors to
indicate which slot they are a part of, resulting in additional
empty slots to appear in EDID management UI.

[How]
Assume that all connectors belong to the same slot.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: do not compare integers of different widths

[Why & How]
Increase width of some variables to avoid comparing integers of
different widths

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: increase dcn315 pstate change latency

[Why & How]
Update after new measurment came in

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Ignore k1/k2 values for virtual signal

[Why and How]
We are hitting k1/k2 assert when we are using a virtual signal in the
test; as a result, we are failing some automated tests with a false
positive. This commit addresses this issue by ignoring the assert
condition if we use SIGNAL_TYPE_VIRTUAL.

Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't allocate DET for phantom pipes

[Why & How]
We should not allocate any DET for the phantom pipes.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DP MST timeslot issue when fallback happened

[Why]
When USB4 DP link training failed and fell back to lower link rate,
the time slot calculation uses the verified_link_cap.
And the verified_link_cap was not updated to the new one.
It caused the wrong VC payload time-slot was allocated.

[How]
Updated verified_link_cap with the new one from cur_link_settings
after the LT completes successfully.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Display distortion after hotplug 5K tiled display

[Why]
During hot plug of specific 5K tiled display, sometimes both the tiles
are not synchronized resulting in distortion. The reason is that otgs of
both the tiles goes out of sync when otg workaround (dcnxxx_disable_otg_wa)
is applied for bandwidth optimization. The otg workaround reenables otg
but otg synchronization context is not reset and hence dc_trigger_sync()
does not resynchronize otg again.

[How]
Implement reset_sync_context_for_pipe() to reset the otg synchronization
context for the disabled pipe and its slave pipes when otg workaround is
applied.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update dummy P-state search to use DCN32 DML

[Why]
Current DCN3.2 logic for finding the dummy P-state index uses the
DCN3.0 DML validation function instead of DCN3.2 DML.

This can result in either unexpected DML VBA values, or unexpected
dummy P-state index to be used.

[How]
Update the dummy P-state logic to use DCN3.2 DML validation function.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Expose few dchubbub functions

[why]
Expose few dchubbun functions in dcn31 and dcn32 to leverage.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Removing 2 phys

[WHY]
New dcn301 has 2 less phys

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Added new DCN301 Asic Id

[WHY]
Adding new asic id for dcn301

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: correct hostvm flag

[Why]
Hostvm should be enabled/disabled accordding to
the status of riommu_active, but hostvm always
be disabled on DCN31 which causes underflow

[How]
Set correct hostvm flag on DCN31

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sherry Wang <Yao.Wang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix urgent latency override for DCN32/DCN321

[Why]
The urgent latency override is useful when debugging issues
relating to underflow.

Current overridden variable is not correct and has no effect
on DCN3.2 and DCN3.21 DML calculations.

[How]
For DCN3.2 and DCN3.21, override the correct urgent latency
variable when bounding box override is present.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Uncomment SubVP pipe split assignment in driver

[Why & How]
Uncomment SubVP pipe split assignment in driver since FW headers
are now promoted

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: skip audio setup when audio stream is enabled

[why]
We have minimal pipe split transition method to avoid pipe
allocation outage.However, this method will invoke audio setup
which cause audio output stuck once pipe reallocate.

[how]
skip audio setup for pipelines which audio stream has been enabled

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: zhikzhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update gamut remap if plane has changed

[Why]
The desktop plane and full-screen game plane may have different
gamut remap coefficients, if switching between desktop and
full-screen game without updating the gamut remap will cause
incorrect color.

[How]
Update gamut remap if planes change.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor edp panel power sequencer(PPS) codes

[Why & How]
Move extra panel power sequencer settings into panel_cofig struct.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.203

This version brings along following fixes:
- Port DCN30 420 logic to DCN32
- Remove some unused definitions from DCN32/321
- Remove dp dig pixle rate div policy from dcn314
- Fix dcn315 reading of memory channel count and width

- Fix SubVP and ODM relevant issues
- Fix pipe split, MPO and ODM relevant issues
- Support proper mst payload removal when link is not in mst mode in dc
- Assume an LTTPR is always present on fixed_vs links
- Rework recent update PHY state commit
- Add debug option and logs

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.134.0

- Handle pipe split case for SubVP:
  Pass in pipe split index for main and phantom pipes

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix SubVP way calculation

[Why and How]
- Don't skip bottom and next odm pipe when calculating
  num ways for subvp
- Don't need to double cache lines for DCC (divide by 256)

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable SubVP on driver disable

[Why and How]
- For driver disable cases in current implementation, if P-State
  is unsupported or still supported by firmware, we force it
  supported by DCN.

- SubVP now needs to be included in this case along with FPO.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: SubVP pipe split case

[Why and How]
For SubVP pipe split case, pass in split index for
main and phantom pipes to ensure that the P-State
sequence will force P-State for all required pipes.

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debug option for allocating extra way for cursor

[Why and How]
- Add a debug option for allocating extra way for cursor
- Remove usage of cache_cursor_addr since it's not gaurenteed
  to be populated
- Include cursor size in MALL calculation if it exceeds the
  DCN cursor buffer size (and don't need extra way for cursor)

Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: For ODM seamless transition require AUTO mode

[Why & How]
ODM seamless transitions require DIV_MODE_AUTO. However,
DIV_MODE_AUTO only works when all the horizontal timing params
are divisible by the ODM combine factor. Therefore, disable the
ODM 2:1 policy when the horizontal timing params are not divisible
by 2.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: support proper mst payload removal when link is not in mst mode in dc

[why]
When user unplugs mst hubs, the current code will forcefully zero
entire mst payload allocation table structure stored in link before we
deallocate actual payload when disabling stream.

During the first disable stream sequence, we will use current mst
payload allocation table to determine if link should be turned off.
Because we zero out it before we are disabling stream, the payload
allocation table stored in link doesn't represent the actual allocation status,
so we turn off link at the first disable stream without waiting until all
streams' payloads have been deallocated. This avoilates the designed
deallocation sequence and caused system hang in DP2 scenario.

[how]
Remove payload during deallocation and never zero payload allocation structure
without actually deallocating payload.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: rework recent update PHY state commit

[why]
Original change 594b237b9a07 ("drm/amd/display: Add
interface to track PHY state") was implemented by assuming stream's
dpms off is equivalent to PHY power off.
This assumption doesn't hold in following situations:
1. MST multiple stream scenario, where multiple streams are sharing the
same PHY output. Toggle dpms off for one of the stream doesn't power
off the PHY due to the presence of other streams.
2. enable stream failure scenario, where enable stream fails due to
failure of link training. This will cause DPMS off is set to false, while
the actual PHY power state is off in certain cases.
Due to the problematic assumption, the logic will skip disabling
other streams for MST multiple stream scenario, therefore PHY is
not actually powered off.

[how]
1. Rework this refactor by moving PHY state update down to hardware
level, where we update PHY state in place when hardware sequencer
is actually changing the power state of the PHY hardware.
2. Reimplement symclk on TX off workaround in place when we are actually
calling transmitter control to power off PHY in dcn32. Note the workaround is
added due to the lack of proper software interface to set TX while keeping
symclk on. We plan to address this interface problem so we can set TX off
only without affecting symclk in future dcn versions.

Fixes: 594b237b9a07 ("drm/amd/display: Add interface to track PHY state")
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add MES and MES-KIQ version in debugfs

This patch addes MES and MES-KIQ version in debugfs.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Assume an LTTPR is always present on fixed_vs links

[WHY]
LTTPRs can in very rare instsances fail to increment DPCD LTTPR count.
This results in aux-i LTTPR requests to be sent to the wrong DPCD
address, which causes link training failure.

[HOW]
Override internal repeater count if fixed_vs flag is set for a given link

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dcn315 memory channel count and width read

[Why & How]
Correctly set ddr5 channel width to 8 bytes

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix double cursor on non-video RGB MPO

[Why]

DC makes use of layer_index (zpos) when picking the HW plane to enable
HW cursor on. However, some compositors will not attach zpos information
to each DRM plane. Consequently, in amdgpu, we default layer_index to 0
and do not update it.

This causes said DC logic to enable HW cursor on all planes of the same
layer_index, which manifests as a double cursor issue if one of the
planes is scaled (and hence scaling the cursor as well).

[How]

Use DRM core helpers to calculate a normalized_zpos value for each
drm_plane_state under each crtc, within the atomic state.

This helper will first consider existing zpos values, and if
identical/unset, fallback to plane ID ordering.

The normalized_zpos is then passed to dc_plane_info during atomic check
for later use by the cursor logic.

Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Only consider pixle rate div policy for DCN32+

[Why and How]
- Only consider pixel rate div policy for DCN32+

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Various logs added

[Why & How]
Added logs for panel delays, spread_spectrum_percentage,
and gpuclk_ss_percentage to facilitate debugging.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add debug option for dramclk_change_latency in apu

[Why & How]
Support dramclk change latency change via debug option and add some
code isolation.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix pipe split prediction

[Why & How]
- Pipe split prediction previously only took into
account MPC split. We must also consider when
ODM combine is required, and when we apply ODM
combine by policy.

- Also re-work DET allocation function as it wasn't
properly splitting the DET per stream, per plane.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove some unused definitions from DCN32/321

[Why&How]
After reg offset initialization was switched to runtime rather than
compile time, some of the defintions are not needed anymore and can
be removed.

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Port DCN30 420 logic to DCN32

[Why]
420 modes are limited by FMT buffer width of 4096
which requires multi-pipe support in form of ODM
combine.  If 420 modes have greater HActive than
4096, the DML logic should accomodate whether
it should be rejected, or ODM combine 2:1 or 4:1
is triggered accordingly.

[How]
FMT Buffer limit of 4096 in DCN32. Force ODM
combine depending on HActive and FMT Buffer limit.
Reject modes if TMDS 420 and above 4096.

Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indentings

clean up some inconsistent indentings

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2182
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indentings

clean up some inconsistent indentings

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2181
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indentings

clean up some inconsistent indentings

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2180
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indentings

clean up some inconsistent indentings

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2179
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indentings

clean up some inconsistent indentings

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2178
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indentings

clean up some inconsistent indentings

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2177
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix spelling mistake "detroyed" -> "destroyed"

There is a spelling mistake in a pr_debug message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add rlcv/rlcp version info to debugfs

amdgpu_firmware_info debugfs will show rlcv/rlcp
ucode version info

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add two new subquery ids

To support query rlcp and rlcv firmware version from
existing AMDGPU_INFO_FW_VERSION interface

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support print rlc v2_x ucode hdr

add rlc v2_x support to print_rlc_hdr helper

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: save rlcv/rlcp ucode version in amdgpu_gfx

cache rlcv/rlcvp ucode version info in amdgpu_gfx
structure

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Use the consolidated MQD manager functions for GFX11

To remove duplication for GFX11 as well, use the common MQD manager
functions defined in kfd_mqd_manager.c for all version of managers

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Update PTE flags with TF enabled

This patch updates the PTE flags when translate further (TF) is
enabled:
- With translate_further enabled, invalid PTEs can be 0. Reading
  consecutive invalid PTEs as 0 is considered a fault. To prevent
  this, ensure invalid PTEs have at least 1 bit set.
- The current invalid PTE flags settings to translate a retry fault
  into a no-retry fault, doesn't work with TF enabled. As a result,
  update invalid PTE flags settings which works for both TF enabled
  and disabled case.

Fixes: 352e683b72e79d ("drm/amdgpu: Enable translate_further to extend UTCL2 reach")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: SDMA update use unlocked iterator

SDMA update page table may be called from unlocked context, this
generate below warning. Use unlocked iterator to handle this case.

WARNING: CPU: 0 PID: 1475 at
drivers/dma-buf/dma-resv.c:483 dma_resv_iter_next
Call Trace:
 dma_resv_iter_first+0x43/0xa0
 amdgpu_vm_sdma_update+0x69/0x2d0 [amdgpu]
 amdgpu_vm_ptes_update+0x29c/0x870 [amdgpu]
 amdgpu_vm_update_range+0x2f6/0x6c0 [amdgpu]
 svm_range_unmap_from_gpus+0x115/0x300 [amdgpu]
 svm_range_cpu_invalidate_pagetables+0x510/0x5e0 [amdgpu]
 __mmu_notifier_invalidate_range_start+0x1d3/0x230
 unmap_vmas+0x140/0x150
 unmap_region+0xa8/0x110

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix boolconv.cocci warning

./drivers/gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c:729:63-68:
WARNING: conversion to bool not needed here

Generated by: scripts/coccinelle/misc/boolconv.cocci
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make optc32_phantom_crtc_post_enable, optc32_setup_manual_trigger and optc32_set_drr static

These three functions are not used outside the function
dcn32_optc.c, so the modification is defined as static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:159:6: warning: no previous prototype for function 'optc32_phantom_crtc_post_enable'.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:218:6: warning: no previous prototype for ‘optc32_set_drr’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:193:6: warning: no previous prototype for ‘optc32_setup_manual_trigger’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2140
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make some functions static

These functions are not used outside the file dcn32_dccg.c, so the
modification is defined as static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:257:6: warning: no previous prototype for ‘dccg32_otg_drop_pixel’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:248:6: warning: no previous prototype for ‘dccg32_otg_add_pixel’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:211:6: warning: no previous prototype for ‘dccg32_set_dpstreamclk’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:136:6: warning: no previous prototype for ‘dccg32_set_dtbclk_dto’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2142
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make some functions static

These functions are not used outside the file dcn32_hubbub.c, so the
modification is defined as static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:912:6: warning: no previous prototype for ‘hubbub32_force_wm_propagate_to_pipes’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:823:6: warning: no previous prototype for ‘hubbub32_wm_read_state’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:772:6: warning: no previous prototype for ‘hubbub32_init_watermarks’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:712:6: warning: no previous prototype for ‘hubbub32_force_usr_retraining_allow’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2141
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make mmhubbub32_config_mcif_buf static

This symbol is not used outside of dcn32_mmhubbub.c, so marks it static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mmhubbub.c:103:6: warning: no previous prototype for ‘mmhubbub32_config_mcif_buf’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2145
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make some functions static

These functions are not used outside the file dcn32_hubbub.c, so the
modification is defined as static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:223:6: warning: no previous prototype for ‘dccg314_set_valid_pixel_rate’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:184:6: warning: no previous prototype for ‘dccg314_set_dpstreamclk’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:140:6: warning: no previous prototype for ‘dccg314_set_dtbclk_dto’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2144
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make optc314_phantom_crtc_post_enable static

This symbol is not used outside of dcn314_optc.c, so marks it static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:153:6: warning: no previous prototype for ‘optc314_phantom_crtc_post_enable’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2147
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make enc314_stream_encoder_dvi_set_stream_attribute static

This symbol is not used outside of dcn314_dio_stream_encoder.c, so marks
it static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dio_stream_encoder.c:84:6: warning: no previous prototype for ‘enc314_stream_encoder_dvi_set_stream_attribute’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2146
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make some functions static

These functions are not used outside the file dcn30_resource.c, so the
modification is defined as static.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1949:6: warning: no previous prototype for ‘is_refresh_rate_support_mclk_switch_using_fw_based_vblank_stretch’.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1919:5: warning: no previous prototype for ‘get_frame_rate_at_max_stretch_100hz’.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2143
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make sure to init common IP before gmc

Move common IP init before GMC init so that HDP gets
remapped before GMC init which uses it.

This fixes the Unsupported Request error reported through
AER during driver load. The error happens as a write happens
to the remap offset before real remapping is done.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.

Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega

This mirrors what we do for other asics and this way we are
sure the sdma doorbell range is properly initialized.

There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized.  However, the statement says that it applies to
multimedia as well, but the VCN code currently initializes
doorbells after GFX and there are no known issues there.  In my
testing at least I don't see any problems on SDMA.

This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.

Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move nbio ih_doorbell_range() into ih code for vega

This mirrors what we do for other asics and this way we are
sure the ih doorbell range is properly initialized.

There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized.  In this case IH is initialized before GFX,
so there should be no issue.

This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.

Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm:add new gpu_metrics_v2_3 to acquire average temperature info

Add new gpu_metrics_v2_3 to acquire average temperature info from SMU metrics. To acquire average temp info from gpu_metrics interface, but gpu_metrics_v2_2 only has members to show current temp info.
---
v1:
Only add average_temperature_gfx in gpu_metrics_v2_3.
v2:
Add average temp members for soc, core and l3 in gpu_metrics_v2_3 and put these new members at the end of gpu_metrics_v2_3. Add operation to read average temp info from metrics table.
v3:
Merge v1 and v2 and rename the patch.
v4:
Merge v3. Add firmware version judgment in vangogh_common_get_gpu_metrics to maintain backward compatibility and rename the patch. "return ret" on error scenario in smu_cmn_get_smc_version.

Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/amdgpu_dm: remove duplicate included header files

soc15_common.h is included more than once.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>