Christophe JAILLET [Sat, 29 Jan 2022 15:06:24 +0000 (16:06 +0100)]
drm/bridge: lt9611: Fix an error handling path in lt9611_probe()
If lt9611_audio_init() fails, some resources still need to be released
before returning an error code.
Add the missing goto the error handling path.
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/9c20eb74d42f6d4128e58e3e46aa320482472b77.1643468761.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Yongzhi Liu [Mon, 24 Jan 2022 07:20:35 +0000 (23:20 -0800)]
drm/bridge: Add missing pm_runtime_put_sync
pm_runtime_get_sync() will increase the rumtime PM counter
even when it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error. Besides, a matching decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1643008835-73961-1-git-send-email-lyz_cs@pku.edu.cn
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:52 +0000 (01:37 +0100)]
drm/xen: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-38-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:51 +0000 (01:37 +0100)]
drm/tilcdc: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-37-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:50 +0000 (01:37 +0100)]
drm/tegra: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-36-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:49 +0000 (01:37 +0100)]
drm/sti: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-35-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:48 +0000 (01:37 +0100)]
drm/sprd: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-34-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:47 +0000 (01:37 +0100)]
drm/rockchip: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-33-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:46 +0000 (01:37 +0100)]
drm: rcar-du: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-32-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:45 +0000 (01:37 +0100)]
drm/omap: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-31-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:44 +0000 (01:37 +0100)]
drm/msm: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-30-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:43 +0000 (01:37 +0100)]
drm/mediatek: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-29-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:42 +0000 (01:37 +0100)]
drm/mcde: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-28-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:41 +0000 (01:37 +0100)]
drm/ingenic: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-27-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:40 +0000 (01:37 +0100)]
drm/imx: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-26-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:39 +0000 (01:37 +0100)]
drm/hyperv: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Deepak Rawat <drawat.floss@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-25-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:38 +0000 (01:37 +0100)]
drm/gma500: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-24-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:37 +0000 (01:37 +0100)]
drm/exynos: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-23-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:36 +0000 (01:37 +0100)]
drm/armada: Add support for the nomodeset kernel parameter
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-22-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:35 +0000 (01:37 +0100)]
drm/xlnx: Use drm_module_platform_driver() to register the driver
The macro calls to a DRM specific platform driver init handler that checks
whether the driver is allowed to be registered or not.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-21-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:34 +0000 (01:37 +0100)]
drm/tve200: Use drm_module_platform_driver() to register the driver
The macro calls to a DRM specific platform driver init handler that checks
whether the driver is allowed to be registered or not.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-20-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:33 +0000 (01:37 +0100)]
drm/arc: Use drm_module_platform_driver() to register the driver
The macro calls to a DRM specific platform driver init handler that checks
whether the driver is allowed to be registered or not.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-19-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:32 +0000 (01:37 +0100)]
drm/tidss: Use drm_module_platform_driver() to register the driver
The macro calls to a DRM specific platform driver init handler that checks
whether the driver is allowed to be registered or not.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-18-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:31 +0000 (01:37 +0100)]
drm/sun4i: Use drm_module_platform_driver() to register the driver
The macro calls to a DRM specific platform driver init handler that checks
whether the driver is allowed to be registered or not.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-17-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:30 +0000 (01:37 +0100)]
drm/stm: Use drm_module_platform_driver() to register the driver
The macro calls to a DRM specific platform driver init handler that checks
whether the driver is allowed to be registered or not.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-16-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:29 +0000 (01:37 +0100)]
drm/shmobile: Use drm_module_platform_driver() to register the driver
The macro calls to a DRM specific platform driver init handler that checks
whether the driver is allowed to be registered or not.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-15-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:28 +0000 (01:37 +0100)]
drm: mxsfb: Use drm_module_platform_driver() to register the driver
The macro calls to a DRM specific platform driver init handler that checks
whether the driver is allowed to be registered or not.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-14-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:27 +0000 (01:37 +0100)]
drm/meson: Use drm_module_platform_driver() to register the driver
The macro calls to a DRM specific platform driver init handler that checks
whether the driver is allowed to be registered or not.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-13-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:26 +0000 (01:37 +0100)]
drm/kmb: Use drm_module_platform_driver() to register the driver
The macro calls to a DRM specific platform driver init handler that checks
whether the driver is allowed to be registered or not.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-12-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:24 +0000 (01:37 +0100)]
drm/hisilicon/kirin: Use drm_module_platform_driver() to register the driver
The macro calls to a DRM specific platform driver init handler that checks
whether the driver is allowed to be registered or not.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-10-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:23 +0000 (01:37 +0100)]
drm/fsl-dcu: Use drm_module_platform_driver() to register the driver
The macro calls to a DRM specific platform driver init handler that checks
whether the driver is allowed to be registered or not.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-9-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:22 +0000 (01:37 +0100)]
drm/atmel-hlcdc: Use drm_module_platform_driver() to register the driver
The macro calls to a DRM specific platform driver init handler that checks
whether the driver is allowed to be registered or not.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-8-javierm@redhat.com
Javier Martinez Canillas [Fri, 17 Dec 2021 00:37:21 +0000 (01:37 +0100)]
drm/aspeed: Use drm_module_platform_driver() to register the driver
The macro calls to a DRM specific platform driver init handler that checks
whether the driver is allowed to be registered or not.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-7-javierm@redhat.com
Thomas Zimmermann [Fri, 17 Dec 2021 14:46:15 +0000 (15:46 +0100)]
drm/vmwgfx: Replace module-init boiler-plate code with DRM helpers
Remove custom vmwgfx_init() and vmwgfx_exit() functions and initialize
the module with DRM_module helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217144615.32733-11-tzimmermann@suse.de
Thomas Zimmermann [Fri, 17 Dec 2021 14:46:14 +0000 (15:46 +0100)]
drm/vboxvideo: Replace module-init boiler-plate code with DRM helpers
Remove custom vbox_init() and vbox_exit() functions and initialize
the module with DRM module helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217144615.32733-10-tzimmermann@suse.de
Thomas Zimmermann [Fri, 17 Dec 2021 14:46:13 +0000 (15:46 +0100)]
drm/qxl: Replace module-init boiler-plate code with DRM helpers
Remove custom qxl_init() and qxl_exit() functions and initialize
the module with DRM module helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217144615.32733-9-tzimmermann@suse.de
Thomas Zimmermann [Fri, 17 Dec 2021 14:46:12 +0000 (15:46 +0100)]
drm/qxl: Move ioctl array next to its only user
Move the array qxl_ioctl to qxl_drv.c and initialize the num_ioctls
field of struct drm_driver at runtime. Replaces the current fragile
ioctl setup and allows for generating the module init/exit code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217144615.32733-8-tzimmermann@suse.de
Thomas Zimmermann [Fri, 17 Dec 2021 14:46:11 +0000 (15:46 +0100)]
drm/mgag200: Replace module-init boiler-plate code with DRM helpers
Remove custom mgag200_init() and mgag200_exit() functions and initialize
the module with DRM_module helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217144615.32733-7-tzimmermann@suse.de
Javier Martinez Canillas [Thu, 16 Dec 2021 21:09:36 +0000 (22:09 +0100)]
drm/hisilicon/hibmc: Allow to be built if COMPILE_TEST is enabled
The commit
feeb07d0ca5a ("drm/hisilicon/hibmc: Make CONFIG_DRM_HISI_HIBMC
depend on ARM64") made the driver Kconfig symbol to depend on ARM64 since
it only supports that architecture and loading the module on others would
lead to incorrect video modes being used.
But it also prevented the driver to be built on other architectures which
is useful to have compile test coverage when doing subsystem wide changes.
Make the dependency instead to be (ARM64 || COMPILE_TEST), so the driver
is buildable when the CONFIG_COMPILE_TEST option is enabled.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216210936.3329977-1-javierm@redhat.com
Marek Vasut [Wed, 22 Dec 2021 13:32:50 +0000 (14:32 +0100)]
drm/panel: simple: add Multi-Inno Technology MI0700S4T-6
Add Multi-Inno Technology MI0700S4T-6 7" 800x480 DPI panel support.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222133250.6628-1-marex@denx.de
Marek Vasut [Wed, 22 Dec 2021 13:32:00 +0000 (14:32 +0100)]
dt-bindings: display: simple: Add Multi-Inno Technology MI0700S4T-6 panel
Add Multi-Inno Technology MI0700S4T-6 7" 800x480 DPI panel
compatible string.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222133200.6586-1-marex@denx.de
Marek Vasut [Sat, 1 Jan 2022 21:37:55 +0000 (22:37 +0100)]
drm: mxsfb: Shutdown the display on system shutdown
When the system shuts down or warm reboots, the display may be active.
Implement the platform_driver .shutdown() operation and shut down the
display.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220101213755.506404-1-marex@denx.de
Marek Vasut [Fri, 31 Dec 2021 16:00:56 +0000 (17:00 +0100)]
drm: mxsfb: Shutdown the display on remove
When the device is unbound from the driver, the display may be active.
Make sure it gets shut down.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211231160056.302276-1-marex@denx.de
Marek Vasut [Sat, 18 Dec 2021 15:23:09 +0000 (16:23 +0100)]
dt-bindings: display: bridge: lvds-codec: Document TI DS90CF364A decoder
Add compatible string for TI DS90CF364A, which is another LVDS to DPI
decoder similar to DS90CF384A, except it is using smaller package and
only provides 18bit DPI bus.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211218152309.256183-1-marex@denx.de
Thomas Zimmermann [Tue, 25 Jan 2022 09:12:22 +0000 (10:12 +0100)]
drm: Add TODO item for requesting memory regions
Add a TODO item about requesting memory regions for each driver. The
current DRM drivers don't do this consistently.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-6-tzimmermann@suse.de
Thomas Zimmermann [Tue, 25 Jan 2022 09:12:21 +0000 (10:12 +0100)]
fbdev/simplefb: Request memory region in driver
Requesting the framebuffer memory in simpledrm marks the memory
range as busy. This used to be done by the firmware sysfb code,
but the driver is the correct place.
v2:
* store memory region in struct for later cleanup (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-5-tzimmermann@suse.de
Thomas Zimmermann [Tue, 25 Jan 2022 09:12:20 +0000 (10:12 +0100)]
drm/simpledrm: Request memory region in driver
Requesting the framebuffer memory in simpledrm marks the memory
range as busy. This used to be done by the firmware sysfb code,
but the driver is the correct place.
v2:
* use I/O memory if request_mem_region() fails (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-4-tzimmermann@suse.de
Javier Martinez Canillas [Tue, 25 Jan 2022 09:12:19 +0000 (10:12 +0100)]
drivers/firmware: Don't mark as busy the simple-framebuffer IO resource
The sysfb_create_simplefb() function requests a IO memory resource for the
simple-framebuffer platform device, but it also marks it as busy which can
lead to drivers requesting the same memory resource to fail.
Let's drop the IORESOURCE_BUSY flag and let drivers to request it as busy
instead.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-3-tzimmermann@suse.de
Thomas Zimmermann [Tue, 25 Jan 2022 09:12:18 +0000 (10:12 +0100)]
fbdev: Hot-unplug firmware fb devices on forced removal
Hot-unplug all firmware-framebuffer devices as part of removing
them via remove_conflicting_framebuffers() et al. Releases all
memory regions to be acquired by native drivers.
Firmware, such as EFI, install a framebuffer while posting the
computer. After removing the firmware-framebuffer device from fbdev,
a native driver takes over the hardware and the firmware framebuffer
becomes invalid.
Firmware-framebuffer drivers, specifically simplefb, don't release
their device from Linux' device hierarchy. It still owns the firmware
framebuffer and blocks the native drivers from loading. This has been
observed in the vmwgfx driver. [1]
Initiating a device removal (i.e., hot unplug) as part of
remove_conflicting_framebuffers() removes the underlying device and
returns the memory range to the system.
[1] https://lore.kernel.org/dri-devel/
20220117180359.18114-1-zack@kde.org/
v2:
* rename variable 'dev' to 'device' (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
CC: stable@vger.kernel.org # v5.11+
Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-2-tzimmermann@suse.de
Linus Walleij [Mon, 3 Jan 2022 09:35:01 +0000 (10:35 +0100)]
drm/panel: Extend ACX424AKP bindings to ACX424AKM
The panel ACX424AKP seems to only be used in prototypes, whereas
real products use the 10 pixels shorter ACX424AKM. Extend the
ACX424AKP bindings to also cover the ACX424AKM. The ACX424AKM
was used in a few different mobile phones from Sony Mobile.
Cc: devicetree@vger.kernel.org
Cc: phone-devel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220103093501.637323-1-linus.walleij@linaro.org
Yunlong Jia [Thu, 20 Jan 2022 06:45:10 +0000 (06:45 +0000)]
gpu: drm: panel-edp: Add panels planned for sc7180-trogdor-pazquel
We have added corresponding information:
[BOE]NV116WHM-N45 use delay_200_500_e50
[KDB]116N29-30NK-C007 use delay_200_500_e80_d50
[STA]2081116HHD028001-51D use delay_100_500_e200
Add 3 panels & 2 delay.
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Signed-off-by: Grace Mi <grace.mi@ecs.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120064457.1.I337b8db7efaba8eb9c0ffd4da0d8c8133faf6f19@changeid
Christian König [Thu, 15 Jul 2021 12:17:19 +0000 (14:17 +0200)]
drm/ttm: add a weak BO reference to the resource v3
Keep track for which BO a resource was allocated.
This is necessary to move the LRU handling into the resources.
A bit problematic is i915 since it tries to use the resource
interface without a BO which is illegal from the conceptional
point of view.
v2: Document that this is a weak reference and add a workaround for i915
v3: further document that this is protected by ttm_device::lru_lock and
clarify the i915 workaround
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124122514.1832-4-christian.koenig@amd.com
Christian König [Mon, 30 Aug 2021 07:22:06 +0000 (09:22 +0200)]
drm/ttm: add back a reference to the bdev to the res manager
It is simply a lot cleaner to have this around instead of adding
the device throughout the call chain.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124122514.1832-3-christian.koenig@amd.com
Christian König [Fri, 9 Jul 2021 13:18:39 +0000 (15:18 +0200)]
drm/ttm: add ttm_resource_fini v2
Make sure we call the common cleanup function in all
implementations of the resource manager.
v2: fix missing case in i915, rudimentary kerneldoc, should be
filled in more when we add more functionality
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124122514.1832-2-christian.koenig@amd.com
Zhou Qingyang [Mon, 24 Jan 2022 16:58:55 +0000 (00:58 +0800)]
drm/nouveau/acr: Fix undefined behavior in nvkm_acr_hsfw_load_bl()
In nvkm_acr_hsfw_load_bl(), the return value of kmalloc() is directly
passed to memcpy(), which could lead to undefined behavior on failure
of kmalloc().
Fix this bug by using kmemdup() instead of kmalloc()+memcpy().
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 22dcda45a3d1 ("drm/nouveau/acr: implement new subdev to replace "secure boot"")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124165856.57022-1-zhou1615@umn.edu
Yaroslav Bolyukin [Sun, 23 Jan 2022 19:19:55 +0000 (22:19 +0300)]
drm/edid: Support type 7 timings
Per VESA DisplayID Standard v2.0: Type VII Timing – Detailed Timing Data
Definitions were already provided as type I, but not used
Signed-off-by: Yaroslav Bolyukin <iam@lach.pw>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220123191955.57994-1-iam@lach.pw
Maxime Ripard [Thu, 20 Jan 2022 15:16:19 +0000 (16:16 +0100)]
drm/vc4: hdmi: Change CSC callback prototype
In order to support the YUV output, we'll need the atomic state to know
what is the state of the associated property in the CSC setup callback.
Let's change the prototype of that callback to allow us to access it.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-11-maxime@cerno.tech
Maxime Ripard [Thu, 20 Jan 2022 15:16:18 +0000 (16:16 +0100)]
drm/vc4: hdmi: Define colorspace matrices
The current CSC setup code for the BCM2711 uses a sequence of register
writes to configure the CSC depending on whether we output using a full
or limited range.
However, with the upcoming introduction of the YUV output, we're going
to add new matrices to perform the conversions, so we should switch to
something a bit more flexible that takes the matrix as an argument and
programs the CSC accordingly.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-10-maxime@cerno.tech
Maxime Ripard [Thu, 20 Jan 2022 15:16:17 +0000 (16:16 +0100)]
drm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines
On BCM2711, the HDMI_CSC_CTL register value has been hardcoded to an
opaque value. Let's replace it with properly defined values.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-9-maxime@cerno.tech
Maxime Ripard [Thu, 20 Jan 2022 15:16:16 +0000 (16:16 +0100)]
drm/vc4: hdmi: Move XBAR setup to csc_setup
On the BCM2711, the HDMI_VEC_INTERFACE_XBAR register configuration
depends on whether we're using an RGB or YUV output. Let's move that
configuration to the CSC setup.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-8-maxime@cerno.tech
Maxime Ripard [Thu, 20 Jan 2022 15:16:15 +0000 (16:16 +0100)]
drm/vc4: hdmi: Use full range helper in csc functions
The CSC callbacks takes a boolean as an argument to tell whether we're
using the full range or limited range RGB.
However, with the upcoming YUV support, the logic will be a bit more
complex. In order to address this, let's make the callbacks take the
entire mode, and call our new helper to tell whether the full or limited
range RGB should be used.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-7-maxime@cerno.tech
Maxime Ripard [Thu, 20 Jan 2022 15:16:14 +0000 (16:16 +0100)]
drm/vc4: hdmi: Add full range RGB helper
We're going to need to tell whether we want to run with a full or
limited range RGB output in multiple places in the code, so let's create
a helper that will return whether we need with full range or not.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-6-maxime@cerno.tech
Maxime Ripard [Thu, 20 Jan 2022 15:16:13 +0000 (16:16 +0100)]
drm/connector: Fix typo in output format
The HDMI specification mentions YCbCr everywhere, but our enums have
YCrCb. Let's rename it to match.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-5-maxime@cerno.tech
Maxime Ripard [Thu, 20 Jan 2022 15:16:12 +0000 (16:16 +0100)]
drm/edid: Split deep color modes between RGB and YUV444
The current code assumes that the RGB444 and YUV444 formats are the
same, but the HDMI 2.0 specification states that:
The three DC_XXbit bits above only indicate support for RGB 4:4:4 at
that pixel size. Support for YCBCR 4:4:4 in Deep Color modes is
indicated with the DC_Y444 bit. If DC_Y444 is set, then YCBCR 4:4:4
is supported for all modes indicated by the DC_XXbit flags.
So if we have YUV444 support and any DC_XXbit flag set but the DC_Y444
flag isn't, we'll assume that we support that deep colour mode for
YUV444 which breaks the specification.
In order to fix this, let's split the edid_hdmi_dc_modes field in struct
drm_display_info into two fields, one for RGB444 and one for YUV444.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: d0c94692e0a3 ("drm/edid: Parse and handle HDMI deep color modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-4-maxime@cerno.tech
Maxime Ripard [Thu, 20 Jan 2022 15:16:11 +0000 (16:16 +0100)]
drm/edid: Don't clear formats if using deep color
The current code, when parsing the EDID Deep Color depths, that the
YUV422 cannot be used, referring to the HDMI 1.3 Specification.
This specification, in its section 6.2.4, indeed states:
For each supported Deep Color mode, RGB 4:4:4 shall be supported and
optionally YCBCR 4:4:4 may be supported.
YCBCR 4:2:2 is not permitted for any Deep Color mode.
This indeed can be interpreted like the code does, but the HDMI 1.4
specification further clarifies that statement in its section 6.2.4:
For each supported Deep Color mode, RGB 4:4:4 shall be supported and
optionally YCBCR 4:4:4 may be supported.
YCBCR 4:2:2 is also 36-bit mode but does not require the further use
of the Deep Color modes described in section 6.5.2 and 6.5.3.
This means that, even though YUV422 can be used with 12 bit per color,
it shouldn't be treated as a deep color mode.
This is also broken with YUV444 if it's supported by the display, but
DRM_EDID_HDMI_DC_Y444 isn't set. In such a case, the code will clear
color_formats of the YUV444 support set previously in
drm_parse_cea_ext(), but will not set it back.
Since the formats supported are already setup properly in
drm_parse_cea_ext(), let's just remove the code modifying the formats in
drm_parse_hdmi_deep_color_info()
Fixes: d0c94692e0a3 ("drm/edid: Parse and handle HDMI deep color modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-3-maxime@cerno.tech
Maxime Ripard [Thu, 20 Jan 2022 15:16:10 +0000 (16:16 +0100)]
drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetry
The drm_hdmi_avi_infoframe_colorspace() function actually sets the
colorimetry and extended_colorimetry fields in the hdmi_avi_infoframe
structure with DRM_MODE_COLORIMETRY_* values.
To make things worse, the hdmi_avi_infoframe structure also has a
colorspace field used to signal whether an RGB or YUV output is being
used.
Let's remove the inconsistency and allow for the colorspace usage by
renaming the function.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-2-maxime@cerno.tech
Daniel Vetter [Mon, 24 Jan 2022 22:16:33 +0000 (23:16 +0100)]
drm/docs: Document where the C8 color lut is stored
Also add notes that for atomic drivers it's really somewhere else and
no longer in struct drm_crtc.
Maybe we should put a bigger warning here that this is confusing,
since the pixel format is a plane property, but the GAMMA_LUT property
is on the crtc. But I think we can fix this if/when someone finds a
need for a per-plane CLUT, since I'm not sure such hw even exists. I'm
also not sure whether even hardware with a CLUT and a full color
correction pipeline with degamm/cgm/gamma exists.
Motivated by comments from Geert that we have a gap here.
v2: More names for color luts (Laurent).
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124221633.952374-1-daniel.vetter@ffwll.ch
Ira Weiny [Mon, 24 Jan 2022 01:54:05 +0000 (17:54 -0800)]
drm/gma: Remove calls to kmap()
kmap() is being deprecated and these instances are easy to convert to
kmap_local_page().
Furthermore, in gma_crtc_cursor_set() use the memcpy_from_page() helper
instead of an open coded use of kmap_local_page().
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124015409.807587-4-ira.weiny@intel.com
Jani Nikula [Tue, 28 Dec 2021 10:10:51 +0000 (12:10 +0200)]
drm/edid: improve non-desktop quirk logging
Improve non-desktop quirk logging if the EDID indicates non-desktop. If
both are set, note about redundant quirk. If there's no quirk but the
EDID indicates non-desktop, don't log non-desktop is set to 0.
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211228101051.317989-1-jani.nikula@intel.com
Philipp Zabel [Sun, 23 Jan 2022 10:16:53 +0000 (11:16 +0100)]
drm/edid: remove non_desktop quirk for HPN-3515 and LEN-B800.
Now that there is support for the Microsoft VSDB for HMDs, remove the
non-desktop quirk for two devices that are verified to contain it in
their EDID: HPN-3515 and LEN-B800.
Presumably most of the other Windows Mixed Reality headsets contain it
as well, but there are ACR-7FCE and SEC-5194 devices without it.
Tested with LEN-B800.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220123101653.147333-2-philipp.zabel@gmail.com
Philipp Zabel [Sun, 23 Jan 2022 10:16:52 +0000 (11:16 +0100)]
drm/edid: support Microsoft extension for HMDs and specialized monitors
Add minimal support for parsing VSDBs documented in Microsoft's "EDID
extension for head-mounted and specialized monitors" [1]. The version
field and the desktop usage flag can be used to set the non_desktop
connector property.
[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/display/specialized-monitors-edid-extension
Tested with HPN-36C1 and LEN-B800.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220123101653.147333-1-philipp.zabel@gmail.com
Christian König [Tue, 20 Jul 2021 09:04:50 +0000 (11:04 +0200)]
drm/amdgpu: use ttm_resource_manager_debug
Instead of calling the debug operation directly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124124430.20859-10-christian.koenig@amd.com
Christian König [Tue, 20 Jul 2021 08:56:44 +0000 (10:56 +0200)]
drm/radeon: use ttm_resource_manager_debug
Instead of calling the debug operation directly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124124430.20859-8-christian.koenig@amd.com
Thomas Zimmermann [Thu, 20 Jan 2022 11:36:47 +0000 (12:36 +0100)]
drm: Update docs after moving DisplayPort helpers around
DRM's DisplayPort helpers moved into the subdirectory dp/. Change
the documentation accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: adb9d5a2cc77 ("drm/dp: Move DisplayPort helpers into separate helper module")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220120113647.22484-1-tzimmermann@suse.de
Jani Nikula [Thu, 20 Jan 2022 09:48:56 +0000 (11:48 +0200)]
drm/locking: fix drm_modeset_acquire_ctx kernel-doc
The stack_depot member was added without kernel-doc, leading to below
warning. Fix it.
./include/drm/drm_modeset_lock.h:74: warning: Function parameter or
member 'stack_depot' not described in 'drm_modeset_acquire_ctx'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks without backoff")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120094856.3004147-1-jani.nikula@intel.com
Javier Martinez Canillas [Wed, 22 Dec 2021 08:28:31 +0000 (09:28 +0100)]
drm/malidp: Replace module initialization with DRM helpers
Replace module_platform_driver() with drm_module_platform_driver(). The
DRM macro respects drm_firmware_drivers_only() and fails if the flag has
been set.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-11-javierm@redhat.com
Javier Martinez Canillas [Wed, 22 Dec 2021 08:28:30 +0000 (09:28 +0100)]
drm/arm/hdlcd: Replace module initialization with DRM helpers
Replace module_platform_driver() with drm_module_platform_driver(). The
DRM macro respects drm_firmware_drivers_only() and fails if the flag has
been set.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-10-javierm@redhat.com
Javier Martinez Canillas [Wed, 22 Dec 2021 08:28:29 +0000 (09:28 +0100)]
drm/komeda: Replace module initialization with DRM helpers
Replace module_platform_driver() with drm_module_platform_driver(). The
DRM macro respects drm_firmware_drivers_only() and fails if the flag has
been set.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-9-javierm@redhat.com
Javier Martinez Canillas [Wed, 22 Dec 2021 08:28:28 +0000 (09:28 +0100)]
drm/imx/dcss: Replace module initialization with DRM helpers
Replace module_platform_driver() with drm_module_platform_driver(). The
DRM macro respects drm_firmware_drivers_only() and fails if the flag has
been set.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-8-javierm@redhat.com
Javier Martinez Canillas [Wed, 22 Dec 2021 08:28:27 +0000 (09:28 +0100)]
drm: Provide platform module-init macro
Provide a helper macro to register platform DRM drivers. The new
macro behaves like module_platform_driver() with an additional
test if DRM modesetting has been enabled.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-7-javierm@redhat.com
Thomas Zimmermann [Wed, 22 Dec 2021 08:28:26 +0000 (09:28 +0100)]
drm/hisilicon/hibmc: Replace module initialization with DRM helpers
Replace module_pci_driver() with drm_module_pci_driver(). The DRM macro
respects drm_firmware_drivers_only() and fails if the flag has been set.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-6-javierm@redhat.com
Thomas Zimmermann [Wed, 22 Dec 2021 08:28:25 +0000 (09:28 +0100)]
drm/cirrus: Replace module-init boiler-plate code with DRM helpers
Remove custom cirrus_init() and cirrus_exit() functions and initialize
the module with DRM module helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-5-javierm@redhat.com
Thomas Zimmermann [Wed, 22 Dec 2021 08:28:24 +0000 (09:28 +0100)]
drm/bochs: Replace module-init boiler-plate code with DRM helpers
Remove custom bochs_init() and bochs_exit() functions and initialize
the module with DRM module helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-4-javierm@redhat.com
Thomas Zimmermann [Wed, 22 Dec 2021 08:28:23 +0000 (09:28 +0100)]
drm/ast: Replace module-init boiler-plate code with DRM helpers
Remove custom ast_init() and ast_exit() functions and initialize the
module with DRM module helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-3-javierm@redhat.com
Thomas Zimmermann [Wed, 22 Dec 2021 08:28:22 +0000 (09:28 +0100)]
drm: Provide PCI module-init macros
Provide helper macros to register PCI-based DRM drivers. The new
macros behave like module_pci_driver() with an additional test if
DRM modesetting has been enabled.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-2-javierm@redhat.com
José Expósito [Sat, 8 Jan 2022 16:58:12 +0000 (17:58 +0100)]
drm/selftests/test-drm_dp_mst_helper: Fix memory leak in sideband_msg_req_encode_decode
Avoid leaking the "out" variable if it is not possible to allocate
the "txmsg" variable.
Fixes: 09234b88ef55 ("drm/selftests/test-drm_dp_mst_helper: Move 'sideband_msg_req_encode_decode' onto the heap")
Addresses-Coverity-ID:
1475685 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220108165812.46797-1-jose.exposito89@gmail.com
José Expósito [Fri, 7 Jan 2022 18:02:30 +0000 (19:02 +0100)]
drm/doc: Fix TTM acronym
The TTM acronym is defined for the first time in the documentation as
"Translation Table Maps". Afterwards, "Translation Table Manager" is
used as definition.
Fix the first definition to avoid confusion.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107180230.132666-1-jose.exposito89@gmail.com
KuoHsiang Chou [Mon, 17 Jan 2022 08:36:43 +0000 (16:36 +0800)]
drm/ast: Create threshold values for AST2600
The threshold value is used for AST2600 only.
Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220117083643.41493-1-kuohsiang_chou@aspeedtech.com
Jocelyn Falempe [Wed, 19 Jan 2022 10:29:05 +0000 (11:29 +0100)]
mgag200 fix memmapsl configuration in GCTL6 register
On some servers with MGA G200_SE_A (rev 42), booting with Legacy BIOS,
the hardware hangs when using kdump and kexec into the kdump kernel.
This happens when the uncompress code tries to write "Decompressing Linux"
to the VGA Console.
It can be reproduced by writing to the VGA console (0xB8000) after
booting to graphic mode, it generates the following error:
kernel:NMI: PCI system error (SERR) for reason a0 on CPU 0.
kernel:Dazed and confused, but trying to continue
The root cause is the configuration of the MGA GCTL6 register
According to the GCTL6 register documentation:
bit 0 is gcgrmode:
0: Enables alpha mode, and the character generator addressing system is
activated.
1: Enables graphics mode, and the character addressing system is not
used.
bit 1 is chainodd even:
0: The A0 signal of the memory address bus is used during system memory
addressing.
1: Allows A0 to be replaced by either the A16 signal of the system
address (ifmemmapsl is ‘00’), or by the hpgoddev (MISC<5>, odd/even
page select) field, described on page 3-294).
bit 3-2 are memmapsl:
Memory map select bits 1 and 0. VGA.
These bits select where the video memory is mapped, as shown below:
00 => A0000h - BFFFFh
01 => A0000h - AFFFFh
10 => B0000h - B7FFFh
11 => B8000h - BFFFFh
bit 7-4 are reserved.
Current code set it to 0x05 => memmapsl to b01 => 0xa0000 (graphic mode)
But on x86, the VGA console is at 0xb8000 (text mode)
In arch/x86/boot/compressed/misc.c debug strings are written to 0xb8000
As the driver doesn't use this mapping at 0xa0000, it is safe to set it to
0xb8000 instead, to avoid kernel hang on G200_SE_A rev42, with kexec/kdump.
Thus changing the value 0x05 to 0x0d
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220119102905.1194787-1-jfalempe@redhat.com
Zhiming Liu [Mon, 17 Jan 2022 15:41:50 +0000 (23:41 +0800)]
drm/bridge: Remove extra device acquisition method of i2c client in lt9611 driver
We have got the device of i2c client in probe function. So we should remove
extra device acquisition method of i2c client.
Signed-off-by: Zhiming Liu <lzmlzmhh@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220117154150.5145-1-lzmlzmhh@gmail.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Thomas Zimmermann [Tue, 18 Jan 2022 15:44:50 +0000 (16:44 +0100)]
drm/msm: Fix include statements for DisplayPort
Update the include statements for DisplayPort helpers. The header
files are in the dp/ subdirectory.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 5b529e8d9c38 ("drm/dp: Move public DisplayPort headers into dp/")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220118154450.25947-1-tzimmermann@suse.de
Thomas Zimmermann [Tue, 18 Jan 2022 15:44:18 +0000 (16:44 +0100)]
drm/selftests: Select DRM_DP_HELPER
Resolve warnings about non-existing symbols by selecting DRM_DP_HELPER.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: adb9d5a2cc77 ("drm/dp: Move DisplayPort helpers into separate helper module")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220118154418.25932-1-tzimmermann@suse.de
Christian König [Thu, 28 Oct 2021 11:19:22 +0000 (13:19 +0200)]
dma-buf: drop excl_fence parameter from dma_resv_get_fences
Returning the exclusive fence separately is no longer used.
Instead add a write parameter to indicate the use case.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207123411.167006-4-christian.koenig@amd.com
Christian König [Wed, 3 Nov 2021 09:37:06 +0000 (10:37 +0100)]
drm/amdgpu: remove excl as shared workarounds
This was added because of the now dropped shared on excl dependency.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211123142111.3885-15-christian.koenig@amd.com
Arunpravin [Tue, 18 Jan 2022 10:44:59 +0000 (16:14 +0530)]
drm: move the buddy allocator from i915 into common drm
Move the base i915 buddy allocator code into drm
- Move i915_buddy.h to include/drm
- Move i915_buddy.c to drm root folder
- Rename "i915" string with "drm" string wherever applicable
- Rename "I915" string with "DRM" string wherever applicable
- Fix header file dependencies
- Fix alignment issues
- add Makefile support for drm buddy
- export functions and write kerneldoc description
- Remove i915 selftest config check condition as buddy selftest
will be moved to drm selftest folder
cleanup i915 buddy references in i915 driver module
and replace with drm buddy
v2:
- include header file in alphabetical order(Thomas)
- merged changes listed in the body section into a single patch
to keep the build intact(Christian, Jani)
v3:
- make drm buddy a separate module(Thomas, Christian)
v4:
- Fix build error reported by kernel test robot <lkp@intel.com>
- removed i915 buddy selftest from i915_mock_selftests.h to
avoid build error
- removed selftests/i915_buddy.c file as we create a new set of
buddy test cases in drm/selftests folder
v5:
- Fix merge conflict issue
v6:
- replace drm_buddy_mm structure name as drm_buddy(Thomas, Christian)
- replace drm_buddy_alloc() function name as drm_buddy_alloc_blocks()
(Thomas)
- replace drm_buddy_free() function name as drm_buddy_free_block()
(Thomas)
- export drm_buddy_free_block() function
- fix multiple instances of KMEM_CACHE() entry
v7:
- fix warnings reported by kernel test robot <lkp@intel.com>
- modify the license(Christian)
v8:
- fix warnings reported by kernel test robot <lkp@intel.com>
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220118104504.2349-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Roberto Sassu [Mon, 13 Dec 2021 18:31:22 +0000 (19:31 +0100)]
drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free()
If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it
happened in the bug report by syzbot), virtio_gpu_array_put_free() could be
called with objs equal to NULL.
Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise
return from the function.
Cc: stable@vger.kernel.org # 5.13.x
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reported-by: syzbot+e9072e90624a31dfa85f@syzkaller.appspotmail.com
Fixes: 377f8331d0565 ("drm/virtio: fix possible leak/unlock virtio_gpu_object_array")
Link: http://patchwork.freedesktop.org/patch/msgid/20211213183122.838119-1-roberto.sassu@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pavel Skripkin [Thu, 30 Dec 2021 14:26:49 +0000 (17:26 +0300)]
udmabuf: validate ubuf->pagecount
Syzbot has reported GPF in sg_alloc_append_table_from_pages(). The
problem was in ubuf->pages == ZERO_PTR.
ubuf->pagecount is calculated from arguments passed from user-space. If
user creates udmabuf with list.size == 0 then ubuf->pagecount will be
also equal to zero; it causes kmalloc_array() to return ZERO_PTR.
Fix it by validating ubuf->pagecount before passing it to
kmalloc_array().
Fixes: fbb0de795078 ("Add udmabuf misc device")
Reported-and-tested-by: syzbot+2c56b725ec547fa9cb29@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211230142649.23022-1-paskripkin@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
owen [Mon, 17 Jan 2022 10:09:49 +0000 (18:09 +0800)]
drm/bridge: anx7625: Return -EPROBE_DEFER if the dsi host was not found
It will connect to the mipi dsi host and find the corresponding
mipi dsi host node, but the node registered by the mipi dsi host
has not been loaded yet. of_find_mipi_dsi_host_by_node() returns -EINVAL
which causes the calling driver to fail.
If the anx7625 driver is loaded afterwards the driver requesting
the mipi dsi host will not notice this.
Better approach is to return -EPROBE_DEFER in such case.
Then when the anx7625 driver appears the driver requesting
the mipi dsi host will be probed again.
Signed-off-by: owen <qwt9588@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220117100949.9542-1-qwt9588@gamil.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Thomas Zimmermann [Fri, 14 Jan 2022 11:45:35 +0000 (12:45 +0100)]
drm/dp: Move DisplayPort AUX bus helpers into dp/
Move drm_dp_aux_bus.c and its header file into the DP subdirectory
and update all users. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-6-tzimmermann@suse.de
Thomas Zimmermann [Fri, 14 Jan 2022 11:45:34 +0000 (12:45 +0100)]
drm/dp: Move public DisplayPort headers into dp/
Move all public DisplayPort headers into dp/ and update users. No
functional changes.
v3:
* rebased onto latest drm-tip
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-5-tzimmermann@suse.de
projects / platform / kernel / linux-starfive.git / log