Dave Stevenson [Fri, 28 Oct 2022 16:08:51 +0000 (17:08 +0100)]
media: i2c: ov9282: Support more than 1 mode.
The driver currently has multiple assumptions that there is
only one supported mode.
Convert supported_mode to an array, and fix up all references
to correctly look at that array.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Dave Stevenson [Fri, 28 Oct 2022 16:08:50 +0000 (17:08 +0100)]
media: i2c: ov9282: Remove pixel rate from mode definition
The pixel rate is determined by the PLL setup in the common
registers, not by the mode specific registers, therefore
remove it from the mode definition and define it for all modes.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Dave Stevenson [Fri, 28 Oct 2022 16:08:49 +0000 (17:08 +0100)]
media: i2c: ov9282: Remove format code from the mode
The format code is independent of mode, and each mode could
support both Y10 and Y8, so disassociate the code from the
mode.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Dave Stevenson [Fri, 28 Oct 2022 16:08:48 +0000 (17:08 +0100)]
media: i2c: ov9282: Split registers into common and mode specific
Currently only one mode is supported, so all registers were
dropped in one list.
In preparation for adding more modes, split out the common registers
from those which configure the mode.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Dave Stevenson [Fri, 28 Oct 2022 16:08:47 +0000 (17:08 +0100)]
media: i2c: ov9282: Remove duplication of registers
TIMING_VTS (registers 0x380e/f), EXPOSURE (registers
0x3500/1/2), and GAIN (0x3509) are all set from
ov9282_update_exp_gain as part of the control handler,
therefore they do not need to be in the main list of
registers.
Remove them.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Mon, 31 Oct 2022 23:22:02 +0000 (23:22 +0000)]
media: i2c: ov5645: Call ov5645_entity_init_cfg() before registering the subdev
Make sure we call ov5645_entity_init_cfg() before registering the subdev
to make sure default formats are set up.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Mon, 31 Oct 2022 23:22:01 +0000 (23:22 +0000)]
media: i2c: ov5645: Make sure to call PM functions
Make sure we call the PM functions while s_stream(0) even in case of
errors in the code flow.
v4l2-core takes care of warning the user so no need to add a warning
message in the driver.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Mon, 31 Oct 2022 23:22:00 +0000 (23:22 +0000)]
media: i2c: ov5645: Drop empty comment
Drop empty multiline comment.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Mon, 31 Oct 2022 23:21:59 +0000 (23:21 +0000)]
media: i2c: ov5645: Use runtime PM
Switch to using runtime PM for power management.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Mon, 31 Oct 2022 23:21:58 +0000 (23:21 +0000)]
media: dt-bindings: ov5645: Convert OV5645 binding to a schema
Convert the simple OV5645 Device Tree binding to json-schema.
The previous binding marked the below properties as required which was a
driver requirement and not the device requirement so just drop them from
the required list during the conversion.
- clock-frequency
- enable-gpios
- reset-gpios
Also drop the "clock-names" property as we have a single clock source for
the sensor and the driver has been updated to drop the clk referencing by
name.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Mon, 31 Oct 2022 23:21:57 +0000 (23:21 +0000)]
media: arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Drop clock-names property
Now that the driver has been updated to drop fetching the clk reference by
name we no longer need the clock-names property in the ov5645 sensor node.
This is in preparation for removal for clock-names property from the DT
binding.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Mon, 31 Oct 2022 23:21:56 +0000 (23:21 +0000)]
media: ARM: dts: imx6qdl-wandboard: Drop clock-names property
Now that the driver has been updated to drop fetching the clk reference by
name we no longer need the clock-names property in the ov5645 sensor node.
This is in preparation for removal for clock-names property from the DT
binding.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Mon, 31 Oct 2022 23:21:55 +0000 (23:21 +0000)]
media: ARM: dts: imx6qdl-pico: Drop clock-names property
Now that the driver has been updated to drop fetching the clk reference by
name we no longer need the clock-names property in the ov5645 sensor node.
This is in preparation for removal for clock-names property from the
DT binding.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Bryan O'Donoghue [Fri, 14 Oct 2022 18:04:17 +0000 (19:04 +0100)]
media: i2c: imx412: Add new compatible strings
The Sony imx577 uses the same silicon enabling reference code in the
available examples provided as the imx412.
Add in compatible strings to enable and differentiate the parts.
Cc: sakari.ailus@iki.fi
Cc: dave.stevenson@raspberrypi.com
Cc: jacopo@jmondi.org
Cc: "Paul J. Murphy" <paul.j.murphy@intel.com>
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Bryan O'Donoghue [Fri, 14 Oct 2022 18:04:16 +0000 (19:04 +0100)]
media: i2c: imx412: Assign v4l2 device subname based on compat string
imx412 and imx577 return the same chip-id when interrogated via i2c.
I've confirmed this myself by
Sakari suggested we should add a new compat which should be reflected in
the name of the media entity
https://patchwork.kernel.org/project/linux-media/patch/
20220607134057.2427663-3-bryan.odonoghue@linaro.org/#
24894500
Set up the .data parameter of of_device_id to pass a string which
we use to set the media entity name. Once done we can add in imx577 as a
compatible chips with the media names reflecting the directed compat string.
Cc: sakari.ailus@iki.fi
Cc: dave.stevenson@raspberrypi.com
Cc: jacopo@jmondi.org
Cc: "Paul J. Murphy" <paul.j.murphy@intel.com>
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Bryan O'Donoghue [Fri, 14 Oct 2022 18:04:15 +0000 (19:04 +0100)]
media: dt-bindings: imx412: Extend compatible strings
Add compatible bindings for imx577 which uses the same silicon enabling
reference code from Sony in the available examples provided.
Cc: sakari.ailus@iki.fi
Cc: dave.stevenson@raspberrypi.com
Cc: jacopo@jmondi.org
Cc: "Paul J. Murphy" <paul.j.murphy@intel.com>
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Andy Shevchenko [Tue, 27 Sep 2022 17:30:11 +0000 (18:30 +0100)]
media: staging: media: tegra-video: Replace custom implementation of device_match_fwnode()
Replace custom implementation of the device_match_fwnode().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Andy Shevchenko [Tue, 27 Sep 2022 17:16:18 +0000 (18:16 +0100)]
media: subdev: Replace custom implementation of device_match_fwnode()
Replace custom implementation of the device_match_fwnode().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Mauro Carvalho Chehab [Tue, 15 Nov 2022 12:11:46 +0000 (12:11 +0000)]
Merge tag 'br-v6.2d' of git://linuxtv.org/hverkuil/media_tree into media_stage
Tag branch
* tag 'br-v6.2d' of git://linuxtv.org/hverkuil/media_tree: (35 commits)
media: saa7164: remove variable cnt
atomisp: fix potential NULL pointer dereferences
radio-terratec: Remove variable p
media: platform: s5p-mfc: Fix spelling mistake "mmaping" -> "mmapping"
media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config
media: vivid: remove redundant assignment to variable checksum
media: cedrus: h264: Optimize mv col buffer allocation
media: cedrus: h265: Associate mv col buffers with buffer
media: mediatek: vcodec: fix h264 cavlc bitstream fail
media: cedrus: hevc: Fix offset adjustments
media: imx-jpeg: Fix Coverity issue in probe
media: v4l2-ioctl.c: Unify YCbCr/YUV terms in format descriptions
media: atomisp: Fix spelling mistake "mis-match" -> "mismatch"
media: c8sectpfe: Add missed header(s)
media: adv748x: afe: Select input port when initializing AFE
media: vimc: Update device configuration in the documentation
media: adv748x: Remove dead function declaration
media: mxl5005s: Make array RegAddr static const
media: atomisp: Fix spelling mistake "modee" -> "mode"
media: meson/vdec: always init coef_node_start
...
Mauro Carvalho Chehab [Tue, 15 Nov 2022 11:55:54 +0000 (11:55 +0000)]
Merge tag 'br-v6.2e' of git://linuxtv.org/hverkuil/media_tree into media_stage
Tag branch
* tag 'br-v6.2e' of git://linuxtv.org/hverkuil/media_tree: (29 commits)
media: davinci/vpbe: Fix a typo ("defualt_mode")
media: sun6i-csi: Remove unnecessary print function dev_err()
media: Documentation: Drop deprecated bytesused == 0
media: platform: exynos4-is: fix return value check in fimc_md_probe()
media: dvb-core: remove variable n, turn for-loop to while-loop
media: vivid: fix compose size exceed boundary
media: rkisp1: make const arrays ae_wnd_num and hist_wnd_num static
media: dvb-core: Fix UAF due to refcount races at releasing
media: rkvdec: Add required padding
media: aspeed: Extend debug message
media: aspeed: Support aspeed mode to reduce compressed data
media: Documentation: aspeed-video: Add user documentation for the aspeed-video driver
media: v4l2-ctrls: Reserve controls for ASPEED
media: v4l: Add definition for the Aspeed JPEG format
staging: media: tegra-video: fix device_node use after free
staging: media: tegra-video: fix chan->mipi value on error
media: cedrus: initialize controls a bit later
media: cedrus: prefer untiled capture format
media: cedrus: Remove cedrus_codec enum
media: cedrus: set codec ops immediately
...
Mauro Carvalho Chehab [Tue, 15 Nov 2022 11:53:57 +0000 (11:53 +0000)]
Merge tag 'tag-venus-for-v6.2' of git://linuxtv.org/svarbanov/media_tree into media_stage
Venus updates for v6.2
* tag 'tag-venus-for-v6.2' of git://linuxtv.org/svarbanov/media_tree:
venus: pm_helpers: Fix error check in vcodec_domains_get()
venus: firmware: Correct assertion of reset bit on remote processor
venus: firmware: Correct non-pix start and end addresses
venus: firmware: Correct reset bit
MAINTAINERS: Change email for Venus driver
MAINTAINERS: Add Vikash as VENUS video driver co-maintainer
Mauro Carvalho Chehab [Tue, 8 Nov 2022 08:46:21 +0000 (08:46 +0000)]
Merge git://linuxtv.org/sailus/media_tree into media_stage
* git://linuxtv.org/sailus/media_tree: (47 commits)
media: i2c: ov4689: code cleanup
media: ov9650: Drop platform data code path
media: ov7670: Drop unused include
media: ov2640: Drop legacy includes
media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver
media: dt-bindings: add bindings for Toshiba TC358746
phy: dphy: add support to calculate the timing based on hs_clk_rate
phy: dphy: refactor get_default_config
v4l: subdev: Warn if disabling streaming failed, return success
dw9768: Enable low-power probe on ACPI
media: i2c: imx290: Replace GAIN control with ANALOGUE_GAIN
media: i2c: imx290: Add crop selection targets support
media: i2c: imx290: Factor out format retrieval to separate function
media: i2c: imx290: Move registers with fixed value to init array
media: i2c: imx290: Create controls for fwnode properties
media: i2c: imx290: Implement HBLANK and VBLANK controls
media: i2c: imx290: Split control initialization to separate function
media: i2c: imx290: Fix max gain value
media: i2c: imx290: Add exposure time control
media: i2c: imx290: Define more register macros
...
Mauro Carvalho Chehab [Tue, 8 Nov 2022 08:45:14 +0000 (08:45 +0000)]
Merge tag 'br-v6.2b' of git://linuxtv.org/hverkuil/media_tree into media_stage
Tag branch
* tag 'br-v6.2b' of git://linuxtv.org/hverkuil/media_tree: (24 commits)
media: imx-jpeg: Lock on ioctl encoder/decoder stop cmd
media: imx-jpeg: Support contiguous and non contiguous format
media: imx-jpeg: Implement g_selection and s_selection
mtk-jpegdec: add stop cmd interface for jpgdec
media: mtk-jpegdec: refactor jpegdec func interface
media: mtk-jpegdec: add output pic reorder interface
media: mtk-jpegdec: add jpeg decode worker interface
media: mtk-jpegdec: add jpegdec timeout func interface
media: mtk-jpegdec: support jpegdec multi-hardware
media: mtk-jpegdec: export jpeg decoder functions
dt-bindings: mediatek: Add mediatek,mt8195-jpgdec compatible
mtk-jpegenc: add stop cmd interface for jpgenc
mtk-jpegenc: add output pic reorder interface
mtk-jpegenc: add jpeg encode worker interface
mtk-jpegenc: add jpegenc timeout func interface
mtk-jpegenc: support jpegenc multi-hardware
mtk-jpegenc: export jpeg encoder functions
dt-bindings: mediatek: Add mediatek, mt8195-jpgenc compatible
media: imx-jpeg: Disable useless interrupt to avoid kernel panic
media: imx-jpeg: Don't clear stop state in handling dynamic resolution change
...
Dafna Hirschfeld [Sat, 8 Oct 2022 21:53:46 +0000 (22:53 +0100)]
media: vimc: Update device configuration in the documentation
Current configuration in the document is outdated and doesn't work. Update
it to match the configuration described in the following commit:
commit
9b4a9b31b9ae ("media: vimc: Enable set resolution at the scaler src pad")
Fixed commit description:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Dafna Hirschfeld <dafna@fastmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Vladimir Zapolskiy [Mon, 4 Jul 2022 22:15:48 +0000 (23:15 +0100)]
media: camss: Split power domain management
There are three cases of power domain management on supported platforms:
1) CAMSS on MSM8916, where a single VFE power domain is operated outside
of the camss device driver,
2) CAMSS on MSM8996 and SDM630/SDM660, where two VFE power domains are
managed separately by the camss device driver, the power domains are
linked and unlinked on demand by their functions vfe_pm_domain_on()
and vfe_pm_domain_off() respectively,
3) CAMSS on SDM845 and SM8250 platforms, and there are two VFE power
domains and their parent power domain TITAN_TOP, the latter one
shall be turned on prior to turning on any of VFE power domains.
Due to a previously missing link between TITAN_TOP and VFEx power domains
in the latter case, which is now fixed by [1], it was decided always to
turn on all found VFE power domains and TITAN_TOP power domain, even if
just one particular VFE is needed to be enabled or none of VFE power
domains are required, for instance the latter case is when vfe_lite is in
use. This misusage becomes more incovenient and clumsy, if next generations
are to be supported, for instance CAMSS on SM8450 has three VFE power
domains.
The change splits the power management support for platforms with TITAN_TOP
parent power domain, and, since 'power-domain-names' property is not
present in camss device tree nodes, the assumption is that the first
N power domains from the 'power-domains' list correspond to VFE power
domains, and, if the number of power domains is greater than number of
non-lite VFEs, then the last power domain from the list is the TITAN_TOP
power domain.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Vladimir Zapolskiy [Mon, 4 Jul 2022 22:15:47 +0000 (23:15 +0100)]
media: camss: Collect information about a number of lite VFEs
VFE lite IPs are found on CAMSS with TITAN_TOP power domains, and in
some aspects these types of VFEs are different, in particular there
is no need to enable VFE power domains to operate over VFE lite IPs.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Vladimir Zapolskiy [Mon, 4 Jul 2022 22:08:14 +0000 (23:08 +0100)]
media: camss: Do not attach an already attached power domain on MSM8916 platform
The change to dynamically allocated power domains neglected a case of
CAMSS on MSM8916 platform, where a single VFE power domain is neither
attached, linked or managed in runtime in any way explicitly.
This is a special case and it shall be kept as is, because the power
domain management is done outside of the driver, and it's very different
in comparison to all other platforms supported by CAMSS.
Fixes:
6b1814e26989 ("media: camss: Allocate power domain resources dynamically")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Vladimir Zapolskiy [Mon, 4 Jul 2022 09:44:37 +0000 (10:44 +0100)]
media: camss: Clean up received buffers on failed start of streaming
It is required to return the received buffers, if streaming can not be
started. For instance media_pipeline_start() may fail with EPIPE, if
a link validation between entities is not passed, and in such a case
a user gets a kernel warning:
WARNING: CPU: 1 PID: 520 at drivers/media/common/videobuf2/videobuf2-core.c:1592 vb2_start_streaming+0xec/0x160
<snip>
Call trace:
vb2_start_streaming+0xec/0x160
vb2_core_streamon+0x9c/0x1a0
vb2_ioctl_streamon+0x68/0xbc
v4l_streamon+0x30/0x3c
__video_do_ioctl+0x184/0x3e0
video_usercopy+0x37c/0x7b0
video_ioctl2+0x24/0x40
v4l2_ioctl+0x4c/0x70
The fix is to correct the error path in video_start_streaming() of camss.
Fixes:
0ac2586c410f ("media: camss: Add files which handle the video device nodes")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Linus Torvalds [Sun, 6 Nov 2022 23:07:11 +0000 (15:07 -0800)]
Linux 6.1-rc4
Linus Torvalds [Sun, 6 Nov 2022 21:09:52 +0000 (13:09 -0800)]
Merge tag 'cxl-fixes-for-6.1-rc4' of git://git./linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"Several fixes for CXL region creation crashes, leaks and failures.
This is mainly fallout from the original implementation of dynamic CXL
region creation (instantiate new physical memory pools) that arrived
in v6.0-rc1.
Given the theme of "failures in the presence of pass-through decoders"
this also includes new regression test infrastructure for that case.
Summary:
- Fix region creation crash with pass-through decoders
- Fix region creation crash when no decoder allocation fails
- Fix region creation crash when scanning regions to enforce the
increasing physical address order constraint that CXL mandates
- Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
1:1 memory-device-to-region associations.
- Fix a memory leak for cxl_region objects when regions with active
targets are deleted
- Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
emulated proximity domains.
- Fix region creation failure for switch attached devices downstream
of a single-port host-bridge
- Fix false positive memory leak of cxl_region objects by recycling
recently used region ids rather than freeing them
- Add regression test infrastructure for a pass-through decoder
configuration
- Fix some mailbox payload handling corner cases"
* tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Recycle region ids
cxl/region: Fix 'distance' calculation with passthrough ports
tools/testing/cxl: Add a single-port host-bridge regression config
tools/testing/cxl: Fix some error exits
cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
cxl/region: Fix cxl_region leak, cleanup targets at region delete
cxl/region: Fix region HPA ordering validation
cxl/pmem: Use size_add() against integer overflow
cxl/region: Fix decoder allocation crash
ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set
cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA.
cxl/region: Fix null pointer dereference due to pass through decoder commit
cxl/mbox: Add a check on input payload size
Linus Torvalds [Sun, 6 Nov 2022 20:59:12 +0000 (12:59 -0800)]
Merge tag 'hwmon-for-v6.1-rc4' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix two regressions:
- Commit
54cc3dbfc10d ("hwmon: (pmbus) Add regulator supply into
macro") resulted in regulator undercount when disabling regulators.
Revert it.
- The thermal subsystem rework caused the scmi driver to no longer
register with the thermal subsystem because index values no longer
match. To fix the problem, the scmi driver now directly registers
with the thermal subsystem, no longer through the hwmon core"
* tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
Revert "hwmon: (pmbus) Add regulator supply into macro"
hwmon: (scmi) Register explicitly with Thermal Framework
Linus Torvalds [Sun, 6 Nov 2022 20:41:32 +0000 (12:41 -0800)]
Merge tag 'perf_urgent_for_v6.1_rc4' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Add Cooper Lake's stepping to the PEBS guest/host events isolation
fixed microcode revisions checking quirk
- Update Icelake and Sapphire Rapids events constraints
- Use the standard energy unit for Sapphire Rapids in RAPL
- Fix the hw_breakpoint test to fail more graciously on !SMP configs
* tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add Cooper Lake stepping to isolation_ucodes[]
perf/x86/intel: Fix pebs event constraints for SPR
perf/x86/intel: Fix pebs event constraints for ICL
perf/x86/rapl: Use standard Energy Unit for SPR Dram RAPL domain
perf/hw_breakpoint: test: Skip the test if dependencies unmet
Linus Torvalds [Sun, 6 Nov 2022 20:36:47 +0000 (12:36 -0800)]
Merge tag 'x86_urgent_for_v6.1_rc4' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add new Intel CPU models
- Enforce that TDX guests are successfully loaded only on TDX hardware
where virtualization exception (#VE) delivery on kernel memory is
disabled because handling those in all possible cases is "essentially
impossible"
- Add the proper include to the syscall wrappers so that BTF can see
the real pt_regs definition and not only the forward declaration
* tag 'x86_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add several Intel server CPU model numbers
x86/tdx: Panic on bad configs that #VE on "private" memory access
x86/tdx: Prepare for using "INFO" call for a second purpose
x86/syscall: Include asm/ptrace.h in syscall_wrapper header
Linus Torvalds [Sun, 6 Nov 2022 20:23:10 +0000 (12:23 -0800)]
Merge tag 'kbuild-fixes-v6.1-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Use POSIX-compatible grep options
- Document git-related tips for reproducible builds
- Fix a typo in the modpost rule
- Suppress SIGPIPE error message from gcc-ar and llvm-ar
- Fix segmentation fault in the menuconfig search
* tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix segmentation fault in menuconfig search
kbuild: fix SIGPIPE error message for AR=gcc-ar and AR=llvm-ar
kbuild: fix typo in modpost
Documentation: kbuild: Add description of git for reproducible builds
kbuild: use POSIX-compatible grep option
Linus Torvalds [Sun, 6 Nov 2022 18:46:59 +0000 (10:46 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the pKVM stage-1 walker erronously using the stage-2 accessor
- Correctly convert vcpu->kvm to a hyp pointer when generating an
exception in a nVHE+MTE configuration
- Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
- Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
- Document the boot requirements for FGT when entering the kernel at
EL1
x86:
- Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
- Make argument order consistent for kvcalloc()
- Userspace API fixes for DEBUGCTL and LBRs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix a typo about the usage of kvcalloc()
KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
KVM: VMX: Ignore guest CPUID for host userspace writes to DEBUGCTL
KVM: VMX: Fold vmx_supported_debugctl() into vcpu_supported_debugctl()
KVM: VMX: Advertise PMU LBRs if and only if perf supports LBRs
arm64: booting: Document our requirements for fine grained traps with SME
KVM: arm64: Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
KVM: Check KVM_CAP_DIRTY_LOG_{RING, RING_ACQ_REL} prior to enabling them
KVM: arm64: Fix bad dereference on MTE-enabled systems
KVM: arm64: Use correct accessor to parse stage-1 PTEs
Linus Torvalds [Sun, 6 Nov 2022 18:42:29 +0000 (10:42 -0800)]
Merge tag 'for-linus-6.1-rc4-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"One fix for silencing a smatch warning, and a small cleanup patch"
* tag 'for-linus-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: simplify sysenter and syscall setup
x86/xen: silence smatch warning in pmu_msr_chk_emulated()
Linus Torvalds [Sun, 6 Nov 2022 18:30:29 +0000 (10:30 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of bugs, including some regressions, the most serious of
which was one which would cause online resizes to fail with file
systems with metadata checksums enabled.
Also fix a warning caused by the newly added fortify string checker,
plus some bugs that were found using fuzzed file systems"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix fortify warning in fs/ext4/fast_commit.c:1551
ext4: fix wrong return err in ext4_load_and_init_journal()
ext4: fix warning in 'ext4_da_release_space'
ext4: fix BUG_ON() when directory entry has invalid rec_len
ext4: update the backup superblock's at the end of the online resize
Linus Torvalds [Sun, 6 Nov 2022 18:19:39 +0000 (10:19 -0800)]
Merge tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"One symlink handling fix and two fixes foir multichannel issues with
iterating channels, including for oplock breaks when leases are
disabled"
* tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix use-after-free on the link name
cifs: avoid unnecessary iteration of tcp sessions
cifs: always iterate smb sessions using primary channel
Linus Torvalds [Sun, 6 Nov 2022 17:57:38 +0000 (09:57 -0800)]
Merge tag 'trace-v6.1-rc3' of git://git./linux/kernel/git/trace/linux-trace
Pull `lTracing fixes for 6.1-rc3:
- Fixed NULL pointer dereference in the ring buffer wait-waiters code
for machines that have less CPUs than what nr_cpu_ids returns.
The buffer array is of size nr_cpu_ids, but only the online CPUs get
initialized.
- Fixed use after free call in ftrace_shutdown.
- Fix accounting of if a kprobe is enabled
- Fix NULL pointer dereference on error path of fprobe rethook_alloc().
- Fix unregistering of fprobe_kprobe_handler
- Fix memory leak in kprobe test module
* tag 'trace-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd()
tracing/fprobe: Fix to check whether fprobe is registered correctly
fprobe: Check rethook_alloc() return in rethook initialization
kprobe: reverse kp->flags when arm_kprobe failed
ftrace: Fix use-after-free for dynamic ftrace_ops
ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters()
Paolo Bonzini [Sun, 6 Nov 2022 08:25:59 +0000 (03:25 -0500)]
Merge tag 'kvmarm-fixes-6.1-3' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD
* Fix the pKVM stage-1 walker erronously using the stage-2 accessor
* Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration
* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
* Document the boot requirements for FGT when entering the kernel
at EL1
Paolo Bonzini [Sun, 6 Nov 2022 08:22:56 +0000 (03:22 -0500)]
Merge branch 'kvm-master' into HEAD
x86:
* Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
* Make argument order consistent for kvcalloc()
* Userspace API fixes for DEBUGCTL and LBRs
Theodore Ts'o [Sun, 6 Nov 2022 03:42:36 +0000 (23:42 -0400)]
ext4: fix fortify warning in fs/ext4/fast_commit.c:1551
With the new fortify string system, rework the memcpy to avoid this
warning:
memcpy: detected field-spanning write (size 60) of single field "&raw_inode->i_generation" at fs/ext4/fast_commit.c:1551 (size 4)
Cc: stable@kernel.org
Fixes:
54d9469bc515 ("fortify: Add run-time WARN for cross-field memcpy()")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jason Yan [Tue, 25 Oct 2022 04:02:06 +0000 (12:02 +0800)]
ext4: fix wrong return err in ext4_load_and_init_journal()
The return value is wrong in ext4_load_and_init_journal(). The local
variable 'err' need to be initialized before goto out. The original code
in __ext4_fill_super() is fine because it has two return values 'ret'
and 'err' and 'ret' is initialized as -EINVAL. After we factor out
ext4_load_and_init_journal(), this code is broken. So fix it by directly
returning -EINVAL in the error handler path.
Cc: stable@kernel.org
Fixes:
9c1dd22d7422 ("ext4: factor out ext4_load_and_init_journal()")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221025040206.3134773-1-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ye Bin [Tue, 18 Oct 2022 02:27:01 +0000 (10:27 +0800)]
ext4: fix warning in 'ext4_da_release_space'
Syzkaller report issue as follows:
EXT4-fs (loop0): Free/Dirty block details
EXT4-fs (loop0): free_blocks=0
EXT4-fs (loop0): dirty_blocks=0
EXT4-fs (loop0): Block reservation details
EXT4-fs (loop0): i_reserved_data_blocks=0
EXT4-fs warning (device loop0): ext4_da_release_space:1527: ext4_da_release_space: ino 18, to_free 1 with only 0 reserved data blocks
------------[ cut here ]------------
WARNING: CPU: 0 PID: 92 at fs/ext4/inode.c:1528 ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1524
Modules linked in:
CPU: 0 PID: 92 Comm: kworker/u4:4 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Workqueue: writeback wb_workfn (flush-7:0)
RIP: 0010:ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1528
RSP: 0018:
ffffc900015f6c90 EFLAGS:
00010296
RAX:
42215896cd52ea00 RBX:
0000000000000000 RCX:
42215896cd52ea00
RDX:
0000000000000000 RSI:
0000000080000001 RDI:
0000000000000000
RBP:
1ffff1100e907d96 R08:
ffffffff816aa79d R09:
fffff520002bece5
R10:
fffff520002bece5 R11:
1ffff920002bece4 R12:
ffff888021fd2000
R13:
ffff88807483ecb0 R14:
0000000000000001 R15:
ffff88807483e740
FS:
0000000000000000(0000) GS:
ffff8880b9a00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00005555569ba628 CR3:
000000000c88e000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
ext4_es_remove_extent+0x1ab/0x260 fs/ext4/extents_status.c:1461
mpage_release_unused_pages+0x24d/0xef0 fs/ext4/inode.c:1589
ext4_writepages+0x12eb/0x3be0 fs/ext4/inode.c:2852
do_writepages+0x3c3/0x680 mm/page-writeback.c:2469
__writeback_single_inode+0xd1/0x670 fs/fs-writeback.c:1587
writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1870
wb_writeback+0x41f/0x7b0 fs/fs-writeback.c:2044
wb_do_writeback fs/fs-writeback.c:2187 [inline]
wb_workfn+0x3cb/0xef0 fs/fs-writeback.c:2227
process_one_work+0x877/0xdb0 kernel/workqueue.c:2289
worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
kthread+0x266/0x300 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
Above issue may happens as follows:
ext4_da_write_begin
ext4_create_inline_data
ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS);
ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA);
__ext4_ioctl
ext4_ext_migrate -> will lead to eh->eh_entries not zero, and set extent flag
ext4_da_write_begin
ext4_da_convert_inline_data_to_extent
ext4_da_write_inline_data_begin
ext4_da_map_blocks
ext4_insert_delayed_block
if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk))
if (!ext4_es_scan_clu(inode, &ext4_es_is_mapped, lblk))
ext4_clu_mapped(inode, EXT4_B2C(sbi, lblk)); -> will return 1
allocated = true;
ext4_es_insert_delayed_block(inode, lblk, allocated);
ext4_writepages
mpage_map_and_submit_extent(handle, &mpd, &give_up_on_write); -> return -ENOSPC
mpage_release_unused_pages(&mpd, give_up_on_write); -> give_up_on_write == 1
ext4_es_remove_extent
ext4_da_release_space(inode, reserved);
if (unlikely(to_free > ei->i_reserved_data_blocks))
-> to_free == 1 but ei->i_reserved_data_blocks == 0
-> then trigger warning as above
To solve above issue, forbid inode do migrate which has inline data.
Cc: stable@kernel.org
Reported-by: syzbot+c740bb18df70ad00952e@syzkaller.appspotmail.com
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221018022701.683489-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
LuÃs Henriques [Wed, 12 Oct 2022 13:13:30 +0000 (14:13 +0100)]
ext4: fix BUG_ON() when directory entry has invalid rec_len
The rec_len field in the directory entry has to be a multiple of 4. A
corrupted filesystem image can be used to hit a BUG() in
ext4_rec_len_to_disk(), called from make_indexed_dir().
------------[ cut here ]------------
kernel BUG at fs/ext4/ext4.h:2413!
...
RIP: 0010:make_indexed_dir+0x53f/0x5f0
...
Call Trace:
<TASK>
? add_dirent_to_buf+0x1b2/0x200
ext4_add_entry+0x36e/0x480
ext4_add_nondir+0x2b/0xc0
ext4_create+0x163/0x200
path_openat+0x635/0xe90
do_filp_open+0xb4/0x160
? __create_object.isra.0+0x1de/0x3b0
? _raw_spin_unlock+0x12/0x30
do_sys_openat2+0x91/0x150
__x64_sys_open+0x6c/0xa0
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The fix simply adds a call to ext4_check_dir_entry() to validate the
directory entry, returning -EFSCORRUPTED if the entry is invalid.
CC: stable@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216540
Signed-off-by: LuÃs Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20221012131330.32456-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Linus Torvalds [Sat, 5 Nov 2022 19:10:25 +0000 (12:10 -0700)]
Merge tag 'acpi-6.1-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Add StorageD3Enable quirk for Dell Inspiron 16 5625 (Mario
Limonciello)"
* tag 'acpi-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: Add another system to quirk list for forcing StorageD3Enable
Rafael J. Wysocki [Sat, 5 Nov 2022 19:01:25 +0000 (20:01 +0100)]
Merge branch 'acpi-x86'
* acpi-x86:
ACPI: x86: Add another system to quirk list for forcing StorageD3Enable
Linus Torvalds [Sat, 5 Nov 2022 16:02:28 +0000 (09:02 -0700)]
Merge tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fixes for the ublk driver (Ming)
- Fixes for error handling memory leaks (Chen Jun, Chen Zhongjin)
- Explicitly clear the last request in a chain when the plug is
flushed, as it may have already been issued (Al)
* tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux:
block: blk_add_rq_to_plug(): clear stale 'last' after flush
blk-mq: Fix kmemleak in blk_mq_init_allocated_queue
block: Fix possible memory leak for rq_wb on add_disk failure
ublk_drv: add ublk_queue_cmd() for cleanup
ublk_drv: avoid to touch io_uring cmd in blk_mq io path
ublk_drv: comment on ublk_driver entry of Kconfig
ublk_drv: return flag of UBLK_F_URING_CMD_COMP_IN_TASK in case of module
ChenXiaoSong [Fri, 4 Nov 2022 07:44:41 +0000 (15:44 +0800)]
cifs: fix use-after-free on the link name
xfstests generic/011 reported use-after-free bug as follows:
BUG: KASAN: use-after-free in __d_alloc+0x269/0x859
Read of size 15 at addr
ffff8880078933a0 by task dirstress/952
CPU: 1 PID: 952 Comm: dirstress Not tainted 6.1.0-rc3+ #77
Call Trace:
__dump_stack+0x23/0x29
dump_stack_lvl+0x51/0x73
print_address_description+0x67/0x27f
print_report+0x3e/0x5c
kasan_report+0x7b/0xa8
kasan_check_range+0x1b2/0x1c1
memcpy+0x22/0x5d
__d_alloc+0x269/0x859
d_alloc+0x45/0x20c
d_alloc_parallel+0xb2/0x8b2
lookup_open+0x3b8/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Allocated by task 952:
kasan_save_stack+0x1f/0x42
kasan_set_track+0x21/0x2a
kasan_save_alloc_info+0x17/0x1d
__kasan_kmalloc+0x7e/0x87
__kmalloc_node_track_caller+0x59/0x155
kstrndup+0x60/0xe6
parse_mf_symlink+0x215/0x30b
check_mf_symlink+0x260/0x36a
cifs_get_inode_info+0x14e1/0x1690
cifs_revalidate_dentry_attr+0x70d/0x964
cifs_revalidate_dentry+0x36/0x62
cifs_d_revalidate+0x162/0x446
lookup_open+0x36f/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 950:
kasan_save_stack+0x1f/0x42
kasan_set_track+0x21/0x2a
kasan_save_free_info+0x1c/0x34
____kasan_slab_free+0x1c1/0x1d5
__kasan_slab_free+0xe/0x13
__kmem_cache_free+0x29a/0x387
kfree+0xd3/0x10e
cifs_fattr_to_inode+0xb6a/0xc8c
cifs_get_inode_info+0x3cb/0x1690
cifs_revalidate_dentry_attr+0x70d/0x964
cifs_revalidate_dentry+0x36/0x62
cifs_d_revalidate+0x162/0x446
lookup_open+0x36f/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
When opened a symlink, link name is from 'inode->i_link', but it may be
reset to a new value when revalidate the dentry. If some processes get the
link name on the race scenario, then UAF will happen on link name.
Fix this by implementing 'get_link' interface to duplicate the link name.
Fixes:
76894f3e2f71 ("cifs: improve symlink handling for smb2+")
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Fri, 28 Oct 2022 10:01:45 +0000 (10:01 +0000)]
cifs: avoid unnecessary iteration of tcp sessions
In a few places, we do unnecessary iterations of
tcp sessions, even when the server struct is provided.
The change avoids it and uses the server struct provided.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Fri, 28 Oct 2022 09:52:26 +0000 (09:52 +0000)]
cifs: always iterate smb sessions using primary channel
smb sessions and tcons currently hang off primary channel only.
Secondary channels have the lists as empty. Whenever there's a
need to iterate sessions or tcons, we should use the list in the
corresponding primary channel.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Sat, 5 Nov 2022 02:52:24 +0000 (19:52 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Avoid kprobe recursion when cortex_a76_erratum_1463225_debug_handler()
is not inlined (change to __always_inline).
- Fix the visibility of compat hwcaps, broken by recent changes to
consolidate the visibility of hwcaps and the user-space view of the
ID registers.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: cpufeature: Fix the visibility of compat hwcaps
arm64: entry: avoid kprobe recursion
Linus Torvalds [Sat, 5 Nov 2022 02:42:25 +0000 (19:42 -0700)]
Merge tag 'i2c-for-6.1-rc4' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A documentation fix and driver fixes for piix4, tegra, and i801"
* tag 'i2c-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Documentation: devres: add missing I2C helper
i2c: i801: add lis3lv02d's I2C address for Vostro 5568
i2c: tegra: Allocate DMA memory for DMA engine
i2c: piix4: Fix adapter not be removed in piix4_remove()
Guenter Roeck [Fri, 4 Nov 2022 23:37:30 +0000 (16:37 -0700)]
Revert "hwmon: (pmbus) Add regulator supply into macro"
This reverts commit
54cc3dbfc10dc3db7cb1cf49aee4477a8398fbde.
Zev Weiss reports that the reverted patch may cause a regulator
undercount. Here is his report:
... having regulator-dummy set as a supply on my PMBus regulators
(instead of having them as their own top-level regulators without
an upstream supply) leads to enable-count underflow errors when
disabling them:
# echo 0 > /sys/bus/platform/devices/efuse01/state
[ 906.094477] regulator-dummy: Underflow of regulator enable count
[ 906.100563] Failed to disable vout: -EINVAL
[ 136.992676] reg-userspace-consumer efuse01: Failed to configure state: -22
Zev reports that reverting the patch fixes the problem. So let's do that
for now.
Fixes:
54cc3dbfc10d ("hwmon: (pmbus) Add regulator supply into macro")
Cc: Marcello Sylvester Bauer <sylv@sylv.io>
Reported-by: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cristian Marussi [Mon, 31 Oct 2022 11:40:18 +0000 (11:40 +0000)]
hwmon: (scmi) Register explicitly with Thermal Framework
Available sensors are enumerated and reported by the SCMI platform server
using a 16bit identification number; not all such sensors are of a type
supported by hwmon subsystem and, among the supported ones, only a subset
could be temperature sensors that have to be registered with the Thermal
Framework.
Potential clashes between hwmon channels indexes and the underlying real
sensors IDs do not play well with the hwmon<-->thermal bridge automatic
registration routines and could need a sensible number of fake dummy
sensors to be made up in order to keep indexes and IDs in sync.
Avoid to use the hwmon<-->thermal bridge dropping the HWMON_C_REGISTER_TZ
attribute and instead explicit register temperature sensors directly with
the Thermal Framework.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221031114018.59048-1-cristian.marussi@arm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Dan Williams [Fri, 4 Nov 2022 00:31:00 +0000 (17:31 -0700)]
cxl/region: Recycle region ids
At region creation time the next region-id is atomically cached so that
there is predictability of region device names. If that region is
destroyed and then a new one is created the region id increments. That
ends up looking like a memory leak, or is otherwise surprising that
identifiers roll forward even after destroying all previously created
regions.
Try to reuse rather than free old region ids at region release time.
While this fixes a cosmetic issue, the needlessly advancing memory
region-id gives the appearance of a memory leak, hence the "Fixes" tag,
but no "Cc: stable" tag.
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes:
779dd20cfb56 ("cxl/region: Add region creation support")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752186062.947915.13200195701224993317.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Nov 2022 00:30:54 +0000 (17:30 -0700)]
cxl/region: Fix 'distance' calculation with passthrough ports
When programming port decode targets, the algorithm wants to ensure that
two devices are compatible to be programmed as peers beneath a given
port. A compatible peer is a target that shares the same dport, and
where that target's interleave position also routes it to the same
dport. Compatibility is determined by the device's interleave position
being >= to distance. For example, if a given dport can only map every
Nth position then positions less than N away from the last target
programmed are incompatible.
The @distance for the host-bridge's cxl_port in a simple dual-ported
host-bridge configuration with 2 direct-attached devices is 1, i.e. An
x2 region divided by 2 dports to reach 2 region targets.
An x4 region under an x2 host-bridge would need 2 intervening switches
where the @distance at the host bridge level is 2 (x4 region divided by
2 switches to reach 4 devices).
However, the distance between peers underneath a single ported
host-bridge is always zero because there is no limit to the number of
devices that can be mapped. In other words, there are no decoders to
program in a passthrough, all descendants are mapped and distance only
starts matters for the intervening descendant ports of the passthrough
port.
Add tracking for the number of dports mapped to a port, and use that to
detect the passthrough case for calculating @distance.
Cc: <stable@vger.kernel.org>
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: http://lore.kernel.org/r/20221010172057.00001559@huawei.com
Fixes:
27b3f8d13830 ("cxl/region: Program target lists")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752185440.947915.6617495912508299445.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Nov 2022 00:30:48 +0000 (17:30 -0700)]
tools/testing/cxl: Add a single-port host-bridge regression config
Jonathan reports that region creation fails when a single-port
host-bridge connects to a multi-port switch. Mock up that configuration
so a fix can be tested and regression tested going forward.
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: http://lore.kernel.org/r/20221010172057.00001559@huawei.com
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752184838.947915.2167957540894293891.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Nov 2022 00:30:42 +0000 (17:30 -0700)]
tools/testing/cxl: Fix some error exits
Fix a few typos where 'goto err_port' was used rather than the object
specific cleanup.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752184255.947915.16163477849330181425.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Nov 2022 00:30:36 +0000 (17:30 -0700)]
cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
When a cxl_nvdimm object goes through a ->remove() event (device
physically removed, nvdimm-bridge disabled, or nvdimm device disabled),
then any associated regions must also be disabled. As highlighted by the
cxl-create-region.sh test [1], a single device may host multiple
regions, but the driver was only tracking one region at a time. This
leads to a situation where only the last enabled region per nvdimm
device is cleaned up properly. Other regions are leaked, and this also
causes cxl_memdev reference leaks.
Fix the tracking by allowing cxl_nvdimm objects to track multiple region
associations.
Cc: <stable@vger.kernel.org>
Link: https://github.com/pmem/ndctl/blob/main/test/cxl-create-region.sh
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Fixes:
04ad63f086d1 ("cxl/region: Introduce cxl_pmem_region objects")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752183647.947915.2045230911503793901.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Nov 2022 00:30:30 +0000 (17:30 -0700)]
cxl/region: Fix cxl_region leak, cleanup targets at region delete
When a region is deleted any targets that have been previously assigned
to that region hold references to it. Trigger those references to
drop by detaching all targets at unregister_region() time.
Otherwise that region object will leak as userspace has lost the ability
to detach targets once region sysfs is torn down.
Cc: <stable@vger.kernel.org>
Fixes:
b9686e8c8e39 ("cxl/region: Enable the assignment of endpoint decoders to regions")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752183055.947915.17681995648556534844.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Nov 2022 00:30:24 +0000 (17:30 -0700)]
cxl/region: Fix region HPA ordering validation
Some regions may not have any address space allocated. Skip them when
validating HPA order otherwise a crash like the following may result:
devm_cxl_add_region: cxl_acpi cxl_acpi.0: decoder3.4: created region9
BUG: kernel NULL pointer dereference, address:
0000000000000000
[..]
RIP: 0010:store_targetN+0x655/0x1740 [cxl_core]
[..]
Call Trace:
<TASK>
kernfs_fop_write_iter+0x144/0x200
vfs_write+0x24a/0x4d0
ksys_write+0x69/0xf0
do_syscall_64+0x3a/0x90
store_targetN+0x655/0x1740:
alloc_region_ref at drivers/cxl/core/region.c:676
(inlined by) cxl_port_attach_region at drivers/cxl/core/region.c:850
(inlined by) cxl_region_attach at drivers/cxl/core/region.c:1290
(inlined by) attach_target at drivers/cxl/core/region.c:1410
(inlined by) store_targetN at drivers/cxl/core/region.c:1453
Cc: <stable@vger.kernel.org>
Fixes:
384e624bb211 ("cxl/region: Attach endpoint decoders")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166752182461.947915.497032805239915067.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Linus Torvalds [Fri, 4 Nov 2022 22:05:42 +0000 (15:05 -0700)]
Merge tag 'xfs-6.1-fixes-4' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Dave and I had thought that this would be a very quiet cycle, but we
thought wrong.
At first there were the usual trickle of minor bugfixes, but then
Zorro pulled -rc1 and noticed complaints about the stronger memcpy
checks w.r.t. flex arrays.
Analyzing how to fix that revealed a bunch of validation gaps in
validating ondisk log items during recovery, and then a customer hit
an infinite loop in the refcounting code on a corrupt filesystem.
So. This largeish batch of fixes addresses all those problems, I hope.
Summary:
- Fix a UAF bug during log recovery
- Fix memory leaks when mount fails
- Detect corrupt bestfree information in a directory block
- Fix incorrect return value type for the dax page fault handlers
- Fix fortify complaints about memcpy of xfs log item objects
- Strengthen inadequate validation of recovered log items
- Fix incorrectly declared flex array in EFI log item structs
- Log corrupt log items for debugging purposes
- Fix infinite loop problems in the refcount code if the refcount
btree node block keys are corrupt
- Fix infinite loop problems in the refcount code if the refcount
btree records suffer MSB bitflips
- Add more sanity checking to continued defer ops to prevent
overflows from one AG to the next or off EOFS"
* tag 'xfs-6.1-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits)
xfs: rename XFS_REFC_COW_START to _COWFLAG
xfs: fix uninitialized list head in struct xfs_refcount_recovery
xfs: fix agblocks check in the cow leftover recovery function
xfs: check record domain when accessing refcount records
xfs: remove XFS_FIND_RCEXT_SHARED and _COW
xfs: refactor domain and refcount checking
xfs: report refcount domain in tracepoints
xfs: track cow/shared record domains explicitly in xfs_refcount_irec
xfs: refactor refcount record usage in xchk_refcountbt_rec
xfs: dump corrupt recovered log intent items to dmesg consistently
xfs: move _irec structs to xfs_types.h
xfs: actually abort log recovery on corrupt intent-done log items
xfs: check deferred refcount op continuation parameters
xfs: refactor all the EFI/EFD log item sizeof logic
xfs: create a predicate to verify per-AG extents
xfs: fix memcpy fortify errors in EFI log format copying
xfs: make sure aglen never goes negative in xfs_refcount_adjust_extents
xfs: fix memcpy fortify errors in RUI log format copying
xfs: fix memcpy fortify errors in CUI log format copying
xfs: fix memcpy fortify errors in BUI log format copying
...
Linus Torvalds [Fri, 4 Nov 2022 21:55:47 +0000 (14:55 -0700)]
Merge tag 'landlock-6.1-rc4' of git://git./linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"Fix the test build for some distros"
* tag 'landlock-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Build without static libraries
Linus Torvalds [Fri, 4 Nov 2022 21:46:45 +0000 (14:46 -0700)]
Merge tag 'hardening-v6.1-rc4' of git://git./linux/kernel/git/kees/linux
Pull hardening fix from Kees Cook:
- Correctly report struct member size on memcpy overflow (Kees Cook)
* tag 'hardening-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fortify: Capture __bos() results in const temp vars
Linus Torvalds [Fri, 4 Nov 2022 21:37:25 +0000 (14:37 -0700)]
Merge tag 'efi-fixes-for-v6.1-2' of git://git./linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- A pair of tweaks to the EFI random seed code so that externally
provided version of this config table are handled more robustly
- Another fix for the v6.0 EFI variable refactor that turned out to
break Apple machines which don't provide QueryVariableInfo()
- Add some guard rails to the EFI runtime service call wrapper so we
can recover from synchronous exceptions caused by firmware
* tag 'efi-fixes-for-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Recover from synchronous exceptions occurring in firmware
efi: efivars: Fix variable writes with unsupported query_variable_store()
efi: random: Use 'ACPI reclaim' memory for random seed
efi: random: reduce seed size to 32 bytes
efi/tpm: Pass correct address to memblock_reserve
Linus Torvalds [Fri, 4 Nov 2022 21:13:12 +0000 (14:13 -0700)]
Merge tag 'soc-fixes-6.1-2' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are not a lot of important fixes for the soc tree yet this time,
but it's time to upstream what I got so far:
- DT Fixes for Arm Juno and ST-Ericsson Ux500 to add missing critical
temperature points
- A number of fixes for the Arm SCMI firmware, addressing correctness
issues in the code, in particular error handling and resource
leaks.
- One error handling fix for the new i.MX93 power domain driver
- Several devicetree fixes for NXP i.MX6/8/9 and Layerscape chips,
fixing incorrect or missing DT properties for MDIO controller
nodes, CPLD, USB and regulators for various boards, as well as some
fixes for DT schema checks.
- MAINTAINERS file updates for HiSilicon LPC Bus and Broadcom git
URLs"
* tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
arm64: dts: juno: Add thermal critical trip points
firmware: arm_scmi: Fix deferred_tx_wq release on error paths
firmware: arm_scmi: Fix devres allocation device in virtio transport
firmware: arm_scmi: Make Rx chan_setup fail on memory errors
firmware: arm_scmi: Make tx_prepare time out eventually
firmware: arm_scmi: Suppress the driver's bind attributes
firmware: arm_scmi: Cleanup the core driver removal callback
MAINTAINERS: Update HiSilicon LPC BUS Driver maintainer
ARM: dts: ux500: Add trips to battery thermal zones
arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
arm64: dts: imx93: correct gpio-ranges
arm64: dts: imx93: correct s4mu interrupt names
dt-bindings: power: gpcv2: add power-domains property
arm64: dts: imx8: correct clock order
ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
arm64: dts: imx8mn: Correct the usb power domain
...
Tony Luck [Thu, 3 Nov 2022 20:33:10 +0000 (13:33 -0700)]
x86/cpu: Add several Intel server CPU model numbers
These servers are all on the public versions of the roadmap. The model
numbers for Grand Ridge, Granite Rapids, and Sierra Forest were included
in the September 2022 edition of the Instruction Set Extensions document.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20221103203310.5058-1-tony.luck@intel.com
Linus Torvalds [Fri, 4 Nov 2022 18:31:41 +0000 (11:31 -0700)]
Merge tag 'drm-fixes-2022-11-04-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the weekly fixes for rc4. Misc fixes across rockchip, imx,
amdgpu and i915.
The biggest change is for amdkfd where the trap handler needs an
updated fw from a header which makes it a bit larger. I hadn't noticed
this particular file before so I'm going to figure out what the magic
is for, but the fix should be fine for now.
amdgpu:
- DCN 3.1.4 fixes
- DCN 3.2.x fixes
- GC 11.x fixes
- Virtual display fix
- Fail suspend if resources can't be evicted
- SR-IOV fix
- Display PSR fix
amdkfd:
- Fix possible NULL pointer deref
- GC 11.x trap handler fix
i915:
- Add locking around DKL PHY register accesses
- Stop abusing swiotlb_max_segment
- Filter out invalid outputs more sensibly
- Setup DDC fully before output init
- Simplify intel_panel_add_edid_alt_fixed_modes()
- Grab mode_config.mutex during LVDS init to avoid WARNs
rockchip:
- fix probing issues
- fix framebuffer without iommu
- fix vop selection
- fix NULL ptr access
imx:
- Fix Kconfig
- fix mode_valid function"
* tag 'drm-fixes-2022-11-04-1' of git://anongit.freedesktop.org/drm/drm: (35 commits)
drm/amdkfd: update GFX11 CWSR trap handler
drm/amd/display: Investigate tool reported FCLK P-state deviations
drm/amd/display: Add DSC delay factor workaround
drm/amd/display: Round up DST_after_scaler to nearest int
drm/amd/display: Use forced DSC bpp in DML
drm/amd/display: Fix DCN32 DSC delay calculation
drm/amdgpu: Disable GPU reset on SRIOV before remove pci.
drm/amdgpu: disable GFXOFF during compute for GFX11
drm/amd: Fail the suspend if resources can't be evicted
drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()
drm/amdgpu: correct MES debugfs versions
drm/amdgpu: set fb_modifiers_not_supported in vkms
drm/amd/display: cursor update command incomplete
drm/amd/display: Enable timing sync on DCN32
drm/amd/display: Set memclk levels to be at least 1 for dcn32
drm/amd/display: Update latencies on DCN321
drm/amd/display: Limit dcn32 to 1950Mhz display clock
drm/amd/display: Ignore Cable ID Feature
drm/amd/display: Update DSC capabilitie for DCN314
drm/imx: imx-tve: Fix return type of imx_tve_connector_mode_valid
...
Linus Torvalds [Fri, 4 Nov 2022 18:22:44 +0000 (11:22 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Fixes in clk drivers and some clk rate range fixes in the core as
well:
- Make sure the struct clk_rate_request is more sane
- Remove a WARN_ON that was triggering for clks with no parents that
can change frequency
- Fix bad i2c bus transactions on Renesas rs9
- Actually return an error in clk_mt8195_topck_probe() on an error
path
- Keep the GPU memories powered while the clk isn't enabled on
Qualcomm's sc7280 SoC
- Fix the parent clk for HSCIF modules on Renesas' R-Car V4H SoC"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: Update the force mem core bit for GPU clocks
clk: Initialize max_rate in struct clk_rate_request
clk: Initialize the clk_rate_request even if clk_core is NULL
clk: Remove WARN_ON NULL parent in clk_core_init_rate_req()
clk: renesas: r8a779g0: Fix HSCIF parent clocks
clk: renesas: r8a779g0: Add SASYNCPER clocks
clk: mediatek: clk-mt8195-topckgen: Fix error return code in clk_mt8195_topck_probe()
clk: sifive: select by default if SOC_SIFIVE
clk: rs9: Fix I2C accessors
Jonathan Neuschäfer [Fri, 4 Nov 2022 10:13:49 +0000 (11:13 +0100)]
media: davinci/vpbe: Fix a typo ("defualt_mode")
Let's spell the variable name correctly.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Yang Li [Thu, 29 Sep 2022 05:40:03 +0000 (13:40 +0800)]
media: sun6i-csi: Remove unnecessary print function dev_err()
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2314
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Laurent Pinchart [Sun, 9 Oct 2022 21:35:09 +0000 (00:35 +0300)]
media: Documentation: Drop deprecated bytesused == 0
The V4L2 API historically allowed buffers to be queued with bytesused
set to 0 on output devices, in which case the driver would use the
buffer length. This behaviour is deprecated, and videobuf2 prints a
warning message in the kernel log. Drop it from the documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Yang Yingliang [Mon, 24 Oct 2022 13:46:50 +0000 (21:46 +0800)]
media: platform: exynos4-is: fix return value check in fimc_md_probe()
devm_pinctrl_get() may return ERR_PTR(-EPROBE_DEFER), add a minus sign
to fix it.
Fixes:
4163851f7b99 ("[media] s5p-fimc: Use pinctrl API for camera ports configuration")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Colin Ian King [Mon, 24 Oct 2022 14:29:54 +0000 (15:29 +0100)]
media: dvb-core: remove variable n, turn for-loop to while-loop
Variable n is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it. This allows the for-loop to be replaced with a
while-loop.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Liu Shixin [Thu, 27 Oct 2022 12:38:55 +0000 (20:38 +0800)]
media: vivid: fix compose size exceed boundary
syzkaller found a bug:
BUG: unable to handle page fault for address:
ffffc9000a3b1000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD
100000067 P4D
100000067 PUD
10015f067 PMD
1121ca067 PTE 0
Oops: 0002 [#1] PREEMPT SMP
CPU: 0 PID: 23489 Comm: vivid-000-vid-c Not tainted 6.1.0-rc1+ #512
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:memcpy_erms+0x6/0x10
[...]
Call Trace:
<TASK>
? tpg_fill_plane_buffer+0x856/0x15b0
vivid_fillbuff+0x8ac/0x1110
vivid_thread_vid_cap_tick+0x361/0xc90
vivid_thread_vid_cap+0x21a/0x3a0
kthread+0x143/0x180
ret_from_fork+0x1f/0x30
</TASK>
This is because we forget to check boundary after adjust compose->height
int V4L2_SEL_TGT_CROP case. Add v4l2_rect_map_inside() to fix this problem
for this case.
Fixes:
ef834f7836ec ("[media] vivid: add the video capture and output parts")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Colin Ian King [Wed, 2 Nov 2022 15:51:17 +0000 (15:51 +0000)]
media: rkisp1: make const arrays ae_wnd_num and hist_wnd_num static
Don't populate the const arrays on the stack, instead make them
static. Also makes the object code smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Takashi Iwai [Mon, 31 Oct 2022 10:02:45 +0000 (11:02 +0100)]
media: dvb-core: Fix UAF due to refcount races at releasing
The dvb-core tries to sync the releases of opened files at
dvb_dmxdev_release() with two refcounts: dvbdev->users and
dvr_dvbdev->users. A problem is present in those two syncs: when yet
another dvb_demux_open() is called during those sync waits,
dvb_demux_open() continues to process even if the device is being
closed. This includes the increment of the former refcount, resulting
in the leftover refcount after the sync of the latter refcount at
dvb_dmxdev_release(). It ends up with use-after-free, since the
function believes that all usages were gone and releases the
resources.
This patch addresses the problem by adding the check of dmxdev->exit
flag at dvb_demux_open(), just like dvb_dvr_open() already does. With
the exit flag check, the second call of dvb_demux_open() fails, hence
the further corruption can be avoided.
Also for avoiding the races of the dmxdev->exit flag reference, this
patch serializes the dmxdev->exit set up and the sync waits with the
dmxdev->mutex lock at dvb_dmxdev_release(). Without the mutex lock,
dvb_demux_open() (or dvb_dvr_open()) may run concurrently with
dvb_dmxdev_release(), which allows to skip the exit flag check and
continue the open process that is being closed.
CVE-2022-41218 is assigned to those bugs above.
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/20220908132754.30532-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Andrzej Pietrasiewicz [Thu, 27 Oct 2022 08:02:17 +0000 (10:02 +0200)]
media: rkvdec: Add required padding
The addresses of two elements of the segmap[][] member are passed to the
hardware which expects 128-bit aligned addresses. However, without this
patch offsetof(struct rkvdec_vp9_priv_tbl, segmap[0]) is an odd number
(2421) but the hardware just ignores the 5 least significant bits of the
address. As a result, the hardware writes the segmentation map to incorrect
locations.
Inserting 11 bytes of padding corrects this situation by making the said
addresses divisible by 16 (i.e. aligned on a 128-bit boundary).
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Fixes:
f25709c4ff15 ("media: rkvdec: Add the VP9 backend")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jammy Huang [Fri, 28 Oct 2022 02:35:54 +0000 (10:35 +0800)]
media: aspeed: Extend debug message
updated as below:
Capture:
Mode : Direct fetch
VGA bpp mode : 32
Signal : lock
Width : 1920
Height : 1080
FRC : 0
Compression:
Format : JPEG
Subsampling : 444
Quality : 4
Performance:
Frame# : 4
Frame Duration(ms) :
Now : 22
Min : 21
Max : 22
FPS : 45
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jammy Huang [Fri, 28 Oct 2022 02:35:53 +0000 (10:35 +0800)]
media: aspeed: Support aspeed mode to reduce compressed data
aspeed supports differential jpeg format which only compress the parts
which are changed. In this way, it reduces both the amount of data to be
transferred by network and those to be decoded on the client side.
2 new ctrls are added:
* Aspeed HQ Mode: to control aspeed's high quality(2-pass) compression mode
This only works with yuv444 subsampling.
* Aspeed HQ Quality: to control the quality of aspeed's HQ mode
only useful if Aspeed HQ mode is enabled
Aspeed JPEG Format requires an additional buffer, called bcd, to store
the information about which macro block in the new frame is different
from the previous one.
To have bcd correctly working, we need to swap the buffers for src0/1 to
make src1 refer to previous frame and src0 to the coming new frame.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix logging dma_addr_t, use %pad for that]
Jammy Huang [Fri, 28 Oct 2022 02:35:52 +0000 (10:35 +0800)]
media: Documentation: aspeed-video: Add user documentation for the aspeed-video driver
Add user documentation for the aspeed-video driver.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jammy Huang [Fri, 28 Oct 2022 02:35:51 +0000 (10:35 +0800)]
media: v4l2-ctrls: Reserve controls for ASPEED
Reserve controls for ASPEED video family. Aspeed video engine contains a
few features which improve video quality, reduce amount of compressed
data, and etc. Hence, 16 controls are reserved for these aspeed
proprietary features.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jammy Huang [Fri, 28 Oct 2022 02:35:50 +0000 (10:35 +0800)]
media: v4l: Add definition for the Aspeed JPEG format
This introduces support for the Aspeed JPEG format, where the new frame
can refer to previous frame to reduce the amount of compressed data.
The concept is similar to I/P frame of video compression. It will
compare the new frame with previous one to decide which macroblock's
data is changed, and only the changed macroblocks will be compressed.
This Aspeed JPEG format is used by the video engine on Aspeed platforms,
which is generally adapted for remote KVM.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Luca Ceresoli [Wed, 2 Nov 2022 11:01:02 +0000 (12:01 +0100)]
staging: media: tegra-video: fix device_node use after free
At probe time this code path is followed:
* tegra_csi_init
* tegra_csi_channels_alloc
* for_each_child_of_node(node, channel) -- iterates over channels
* automatically gets 'channel'
* tegra_csi_channel_alloc()
* saves into chan->of_node a pointer to the channel OF node
* automatically gets and puts 'channel'
* now the node saved in chan->of_node has refcount 0, can disappear
* tegra_csi_channels_init
* iterates over channels
* tegra_csi_channel_init -- uses chan->of_node
After that, chan->of_node keeps storing the node until the device is
removed.
of_node_get() the node and of_node_put() it during teardown to avoid any
risk.
Fixes:
1ebaeb09830f ("media: tegra-video: Add support for external sensor capture")
Cc: stable@vger.kernel.org
Cc: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Luca Ceresoli [Wed, 2 Nov 2022 11:01:01 +0000 (12:01 +0100)]
staging: media: tegra-video: fix chan->mipi value on error
chan->mipi takes the return value of tegra_mipi_request() which can be a
valid pointer or an error. However chan->mipi is checked in several places,
including error-cleanup code in tegra_csi_channels_cleanup(), as 'if
(chan->mipi)', which suggests the initial intent was that chan->mipi should
be either NULL or a valid pointer, never an error. As a consequence,
cleanup code in case of tegra_mipi_request() errors would dereference an
invalid pointer.
Fix by ensuring chan->mipi always contains either NULL or a void pointer.
Also add that to the documentation.
Fixes:
523c857e34ce ("media: tegra-video: Add CSI MIPI pads calibration")
Cc: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jernej Skrabec [Wed, 2 Nov 2022 18:08:08 +0000 (19:08 +0100)]
media: cedrus: initialize controls a bit later
While it doesn't matter if controls are initialized before or after
queues and formats from open handler standpoint, initializing them last
helps keeping s_ctrl handler simpler, since everything has already valid
values.
This is just preparation for follow up changes. No functional change is
intended.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jernej Skrabec [Wed, 2 Nov 2022 18:08:07 +0000 (19:08 +0100)]
media: cedrus: prefer untiled capture format
While all generations of display engine on Allwinner SoCs support
untiled format, only first generation supports tiled format. Let's
move untiled format up, so it can be picked before tiled one. If
Cedrus variant doesn't support untiled format, tiled will still be
picked as default format.
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jernej Skrabec [Wed, 2 Nov 2022 18:08:06 +0000 (19:08 +0100)]
media: cedrus: Remove cedrus_codec enum
Last user of cedrus_codec enum is cedrus_engine_enable() but this
argument is completely redundant. Same information can be obtained via
source pixel format. Let's remove this argument and enum.
No functional changes intended.
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jernej Skrabec [Wed, 2 Nov 2022 18:08:05 +0000 (19:08 +0100)]
media: cedrus: set codec ops immediately
We'll need codec ops soon after output format is set in following
commits. Let's move current codec setup to set output format callback.
While at it, let's remove one level of indirection by changing
current_codec to point to codec ops structure directly.
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jernej Skrabec [Wed, 2 Nov 2022 18:08:04 +0000 (19:08 +0100)]
media: cedrus: Filter controls based on capability
Because not all Cedrus variants supports all codecs, controls should be
registered only if codec related to individual control is supported by
Cedrus.
Replace codec enum, which is not used at all, with capabilities flags
and register control only if capabilities are met. We have to be careful
though, controls have to be tightly packed in ctx->ctrls array.
Otherwise functions cedrus_find_control_data() and
cedrus_get_num_of_controls() won't work properly.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jernej Skrabec [Wed, 2 Nov 2022 18:08:03 +0000 (19:08 +0100)]
media: cedrus: Add helper for checking capabilities
There is several different Cedrus cores with varying capabilities, so
some operations like listing formats depends on checks if feature is
supported or not.
Currently check for capabilities is only in format handling functions,
but it will be used also elsewhere later. Let's convert this check to
helper and while at it, also simplify it. There is no need to check if
capability mask is zero, condition will still work properly.
No functional changes intended.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jernej Skrabec [Wed, 2 Nov 2022 18:08:02 +0000 (19:08 +0100)]
media: cedrus: use helper to set default formats
Now that set output format helper is available, let's use that for
setting default values. Advantage of this is that values will be always
valid. Current code produced invalid default values for V3s SoC, which
doesn't support MPEG2 decoding.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jernej Skrabec [Wed, 2 Nov 2022 18:08:01 +0000 (19:08 +0100)]
media: cedrus: Add format reset helpers
By re-arranging try format handlers and set out format handler, we can
easily implement reset out/cap format helpers.
There is only one subtle, but important functional change. Capture
pixel format will be reset each time output format is set. This is
actually expected behaviour per stateless decoder API.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jernej Skrabec [Wed, 2 Nov 2022 18:08:00 +0000 (19:08 +0100)]
media: cedrus: remove superfluous call
cedrus_try_fmt_vid_out() is called two times inside
cedrus_s_fmt_vid_out(), but nothing changes between calls which would
influence output format. Remove first call, which was added later.
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Moudy Ho [Thu, 20 Oct 2022 07:18:00 +0000 (15:18 +0800)]
media: platform: mtk-mdp3: fix error handling in mdp_probe()
Adjust label "err_return" order to avoid double freeing, and
add two labels for easy traceability.
Fixes:
61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Moudy Ho [Thu, 20 Oct 2022 07:17:59 +0000 (15:17 +0800)]
media: platform: mtk-mdp3: fix error handling about components clock_on
Add goto statement in mdp_comp_clock_on() to avoid error code not being
propagated or returning positive values.
This change also performs a well-timed clock_off when an error occurs, and
reduces unnecessary error logging in mdp_cmdq_send().
Fixes:
61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Moudy Ho [Thu, 20 Oct 2022 07:17:58 +0000 (15:17 +0800)]
media: platform: mtk-mdp3: fix error handling in mdp_cmdq_send()
Increase and refine the goto label in mdp_cmdq_send() to avoid
double free and facilitate traceability.
Also, remove redundant work queue event in blocking function
mdp_cmdq_send().
Fixes:
61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Moudy Ho [Fri, 7 Oct 2022 09:22:30 +0000 (17:22 +0800)]
media: platform: mtk-mdp3: extend shared memory structure to 4-byte aligned
The communication between MDP3 kernel driver and SCP is pass through
a shared memory, and the data structure is defined in the "mtk-img-ipi.h".
However, there is a 4-byte read limit in further SCP hardware, so the
data structure should be in 4-byte aligned.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Shang XiaoJing [Wed, 2 Nov 2022 07:29:54 +0000 (15:29 +0800)]
tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd()
test_gen_kprobe_cmd() only free buf in fail path, hence buf will leak
when there is no failure. Move kfree(buf) from fail path to common path
to prevent the memleak. The same reason and solution in
test_gen_kretprobe_cmd().
unreferenced object 0xffff888143b14000 (size 2048):
comm "insmod", pid 52490, jiffies
4301890980 (age 40.553s)
hex dump (first 32 bytes):
70 3a 6b 70 72 6f 62 65 73 2f 67 65 6e 5f 6b 70 p:kprobes/gen_kp
72 6f 62 65 5f 74 65 73 74 20 64 6f 5f 73 79 73 robe_test do_sys
backtrace:
[<
000000006d7b836b>] kmalloc_trace+0x27/0xa0
[<
0000000009528b5b>] 0xffffffffa059006f
[<
000000008408b580>] do_one_initcall+0x87/0x2a0
[<
00000000c4980a7e>] do_init_module+0xdf/0x320
[<
00000000d775aad0>] load_module+0x3006/0x3390
[<
00000000e9a74b80>] __do_sys_finit_module+0x113/0x1b0
[<
000000003726480d>] do_syscall_64+0x35/0x80
[<
000000003441e93b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Link: https://lore.kernel.org/all/20221102072954.26555-1-shangxiaojing@huawei.com/
Fixes:
64836248dda2 ("tracing: Add kprobe event command generation test module")
Cc: stable@vger.kernel.org
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>