Peter Zijlstra [Fri, 17 May 2019 11:52:33 +0000 (13:52 +0200)]
perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data
[ Upstream commit
4d839dd9e4356bbacf3eb0ab13a549b83b008c21 ]
We must use {READ,WRITE}_ONCE() on rb->user_page data such that
concurrent usage will see whole values. A few key sites were missing
this.
Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes:
7b732a750477 ("perf_counter: new output ABI - part 1")
Link: http://lkml.kernel.org/r/20190517115418.394192145@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Fri, 17 May 2019 11:52:32 +0000 (13:52 +0200)]
perf/ring_buffer: Add ordering to rb->nest increment
[ Upstream commit
3f9fbe9bd86c534eba2faf5d840fd44c6049f50e ]
Similar to how decrementing rb->next too early can cause data_head to
(temporarily) be observed to go backward, so too can this happen when
we increment too late.
This barrier() ensures the rb->head load happens after the increment,
both the one in the 'goto again' path, as the one from
perf_output_get_handle() -- albeit very unlikely to matter for the
latter.
Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes:
ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.309516009@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yabin Cui [Fri, 17 May 2019 11:52:31 +0000 (13:52 +0200)]
perf/ring_buffer: Fix exposing a temporarily decreased data_head
[ Upstream commit
1b038c6e05ff70a1e66e3e571c2e6106bdb75f53 ]
In perf_output_put_handle(), an IRQ/NMI can happen in below location and
write records to the same ring buffer:
...
local_dec_and_test(&rb->nest)
... <-- an IRQ/NMI can happen here
rb->user_page->data_head = head;
...
In this case, a value A is written to data_head in the IRQ, then a value
B is written to data_head after the IRQ. And A > B. As a result,
data_head is temporarily decreased from A to B. And a reader may see
data_head < data_tail if it read the buffer frequently enough, which
creates unexpected behaviors.
This can be fixed by moving dec(&rb->nest) to after updating data_head,
which prevents the IRQ/NMI above from updating data_head.
[ Split up by peterz. ]
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: mark.rutland@arm.com
Fixes:
ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.224478157@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Frank van der Linden [Wed, 22 May 2019 22:17:45 +0000 (22:17 +0000)]
x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor
[ Upstream commit
2ac44ab608705948564791ce1d15d43ba81a1e38 ]
For F17h AMD CPUs, the CPB capability ('Core Performance Boost') is forcibly set,
because some versions of that chip incorrectly report that they do not have it.
However, a hypervisor may filter out the CPB capability, for good
reasons. For example, KVM currently does not emulate setting the CPB
bit in MSR_K7_HWCR, and unchecked MSR access errors will be thrown
when trying to set it as a guest:
unchecked MSR access error: WRMSR to 0xc0010015 (tried to write 0x0000000001000011) at rIP: 0xffffffff890638f4 (native_write_msr+0x4/0x20)
Call Trace:
boost_set_msr+0x50/0x80 [acpi_cpufreq]
cpuhp_invoke_callback+0x86/0x560
sort_range+0x20/0x20
cpuhp_thread_fun+0xb0/0x110
smpboot_thread_fn+0xef/0x160
kthread+0x113/0x130
kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x35/0x40
To avoid this issue, don't forcibly set the CPB capability for a CPU
when running under a hypervisor.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: jiaxun.yang@flygoat.com
Fixes:
0237199186e7 ("x86/CPU/AMD: Set the CPB bit unconditionally on F17h")
Link: http://lkml.kernel.org/r/20190522221745.GA15789@dev-dsk-fllinden-2c-c1893d73.us-west-2.amazon.com
[ Minor edits to the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 22 May 2019 08:45:13 +0000 (11:45 +0300)]
mISDN: make sure device name is NUL terminated
[ Upstream commit
ccfb62f27beb295103e9392462b20a6ed807d0ea ]
The user can change the device_name with the IMSETDEVNAME ioctl, but we
need to ensure that the user's name is NUL terminated. Otherwise it
could result in a buffer overflow when we copy the name back to the user
with IMGETDEVINFO ioctl.
I also changed two strcpy() calls which handle the name to strscpy().
Hopefully, there aren't any other ways to create a too long name, but
it's nice to do this as a kernel hardening measure.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia-Ju Bai [Wed, 22 May 2019 11:33:58 +0000 (14:33 +0300)]
usb: xhci: Fix a potential null pointer dereference in xhci_debugfs_create_endpoint()
[ Upstream commit
5bce256f0b528624a34fe907db385133bb7be33e ]
In xhci_debugfs_create_slot(), kzalloc() can fail and
dev->debugfs_private will be NULL.
In xhci_debugfs_create_endpoint(), dev->debugfs_private is used without
any null-pointer check, and can cause a null pointer dereference.
To fix this bug, a null-pointer check is added in
xhci_debugfs_create_endpoint().
This bug is found by a runtime fuzzing tool named FIZZER written by us.
[subjet line change change, add potential -Mathais]
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anju T Sudhakar [Mon, 20 May 2019 08:57:53 +0000 (14:27 +0530)]
powerpc/powernv: Return for invalid IMC domain
[ Upstream commit
b59bd3527fe3c1939340df558d7f9d568fc9f882 ]
Currently init_imc_pmu() can fail either because we try to register an
IMC unit with an invalid domain (i.e an IMC node not supported by the
kernel) or something went wrong while registering a valid IMC unit. In
both the cases kernel provides a 'Register failed' error message.
For example when trace-imc node is not supported by the kernel, but
skiboot advertises a trace-imc node we print:
IMC Unknown Device type
IMC PMU (null) Register failed
To avoid confusion just print the unknown device type message, before
attempting PMU registration, so the second message isn't printed.
Fixes:
8f95faaac56c ("powerpc/powernv: Detect and create IMC device")
Reported-by: Pavaman Subramaniyam <pavsubra@in.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Reword change log a bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Mon, 6 May 2019 21:08:54 +0000 (14:08 -0700)]
clk: ti: clkctrl: Fix clkdm_clk handling
[ Upstream commit
1cc54078d104f5b4d7e9f8d55362efa5a8daffdb ]
We need to always call clkdm_clk_enable() and clkdm_clk_disable() even
the clkctrl clock(s) enabled for the domain do not have any gate register
bits. Otherwise clockdomains may never get enabled except when devices get
probed with the legacy "ti,hwmods" devicetree property.
Fixes:
88a172526c32 ("clk: ti: add support for clkctrl clocks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeffrin Jose T [Wed, 15 May 2019 06:44:04 +0000 (12:14 +0530)]
selftests: netfilter: missing error check when setting up veth interface
[ Upstream commit
82ce6eb1dd13fd12e449b2ee2c2ec051e6f52c43 ]
A test for the basic NAT functionality uses ip command which needs veth
device. There is a condition where the kernel support for veth is not
compiled into the kernel and the test script breaks. This patch contains
code for reasonable error display and correct code exit.
Signed-off-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Fri, 17 May 2019 14:31:49 +0000 (22:31 +0800)]
ipvs: Fix use-after-free in ip_vs_in
[ Upstream commit
719c7d563c17b150877cee03a4b812a424989dfa ]
BUG: KASAN: use-after-free in ip_vs_in.part.29+0xe8/0xd20 [ip_vs]
Read of size 4 at addr
ffff8881e9b26e2c by task sshd/5603
CPU: 0 PID: 5603 Comm: sshd Not tainted 4.19.39+ #30
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
dump_stack+0x71/0xab
print_address_description+0x6a/0x270
kasan_report+0x179/0x2c0
ip_vs_in.part.29+0xe8/0xd20 [ip_vs]
ip_vs_in+0xd8/0x170 [ip_vs]
nf_hook_slow+0x5f/0xe0
__ip_local_out+0x1d5/0x250
ip_local_out+0x19/0x60
__tcp_transmit_skb+0xba1/0x14f0
tcp_write_xmit+0x41f/0x1ed0
? _copy_from_iter_full+0xca/0x340
__tcp_push_pending_frames+0x52/0x140
tcp_sendmsg_locked+0x787/0x1600
? tcp_sendpage+0x60/0x60
? inet_sk_set_state+0xb0/0xb0
tcp_sendmsg+0x27/0x40
sock_sendmsg+0x6d/0x80
sock_write_iter+0x121/0x1c0
? sock_sendmsg+0x80/0x80
__vfs_write+0x23e/0x370
vfs_write+0xe7/0x230
ksys_write+0xa1/0x120
? __ia32_sys_read+0x50/0x50
? __audit_syscall_exit+0x3ce/0x450
do_syscall_64+0x73/0x200
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7ff6f6147c60
Code: 73 01 c3 48 8b 0d 28 12 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 5d 73 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83
RSP: 002b:
00007ffd772ead18 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
RAX:
ffffffffffffffda RBX:
0000000000000034 RCX:
00007ff6f6147c60
RDX:
0000000000000034 RSI:
000055df30a31270 RDI:
0000000000000003
RBP:
000055df30a31270 R08:
0000000000000000 R09:
0000000000000000
R10:
00007ffd772ead70 R11:
0000000000000246 R12:
00007ffd772ead74
R13:
00007ffd772eae20 R14:
00007ffd772eae24 R15:
000055df2f12ddc0
Allocated by task 6052:
kasan_kmalloc+0xa0/0xd0
__kmalloc+0x10a/0x220
ops_init+0x97/0x190
register_pernet_operations+0x1ac/0x360
register_pernet_subsys+0x24/0x40
0xffffffffc0ea016d
do_one_initcall+0x8b/0x253
do_init_module+0xe3/0x335
load_module+0x2fc0/0x3890
__do_sys_finit_module+0x192/0x1c0
do_syscall_64+0x73/0x200
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 6067:
__kasan_slab_free+0x130/0x180
kfree+0x90/0x1a0
ops_free_list.part.7+0xa6/0xc0
unregister_pernet_operations+0x18b/0x1f0
unregister_pernet_subsys+0x1d/0x30
ip_vs_cleanup+0x1d/0xd2f [ip_vs]
__x64_sys_delete_module+0x20c/0x300
do_syscall_64+0x73/0x200
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at
ffff8881e9b26600 which belongs to the cache kmalloc-4096 of size 4096
The buggy address is located 2092 bytes inside of 4096-byte region [
ffff8881e9b26600,
ffff8881e9b27600)
The buggy address belongs to the page:
page:
ffffea0007a6c800 count:1 mapcount:0 mapping:
ffff888107c0e600 index:0x0 compound_mapcount: 0
flags: 0x17ffffc0008100(slab|head)
raw:
0017ffffc0008100 dead000000000100 dead000000000200 ffff888107c0e600
raw:
0000000000000000 0000000080070007 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
while unregistering ipvs module, ops_free_list calls
__ip_vs_cleanup, then nf_unregister_net_hooks be called to
do remove nf hook entries. It need a RCU period to finish,
however net->ipvs is set to NULL immediately, which will
trigger NULL pointer dereference when a packet is hooked
and handled by ip_vs_in where net->ipvs is dereferenced.
Another scene is ops_free_list call ops_free to free the
net_generic directly while __ip_vs_cleanup finished, then
calling ip_vs_in will triggers use-after-free.
This patch moves nf_unregister_net_hooks from __ip_vs_cleanup()
to __ip_vs_dev_cleanup(), where rcu_barrier() is called by
unregister_pernet_device -> unregister_pernet_operations,
that will do the needed grace period.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
efe41606184e ("ipvs: convert to use pernet nf_hook api")
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jagdish Motwani [Mon, 13 May 2019 18:17:40 +0000 (23:47 +0530)]
netfilter: nf_queue: fix reinject verdict handling
[ Upstream commit
946c0d8e6ed43dae6527e878d0077c1e11015db0 ]
This patch fixes netfilter hook traversal when there are more than 1 hooks
returning NF_QUEUE verdict. When the first queue reinjects the packet,
'nf_reinject' starts traversing hooks with a proper hook_index. However,
if it again receives a NF_QUEUE verdict (by some other netfilter hook), it
queues the packet with a wrong hook_index. So, when the second queue
reinjects the packet, it re-executes hooks in between.
Fixes:
960632ece694 ("netfilter: convert hook list to an array")
Signed-off-by: Jagdish Motwani <jagdish.motwani@sophos.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephane Eranian [Tue, 21 May 2019 00:52:46 +0000 (17:52 -0700)]
perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints
[ Upstream commit
23e3983a466cd540ffdd2bbc6e0c51e31934f941 ]
This patch fixes an bug revealed by the following commit:
6b89d4c1ae85 ("perf/x86/intel: Fix INTEL_FLAGS_EVENT_CONSTRAINT* masking")
That patch modified INTEL_FLAGS_EVENT_CONSTRAINT() to only look at the event code
when matching a constraint. If code+umask were needed, then the
INTEL_FLAGS_UEVENT_CONSTRAINT() macro was needed instead.
This broke with some of the constraints for PEBS events.
Several of them, including the one used for cycles:p, cycles:pp, cycles:ppp
fell in that category and caused the event to be rejected in PEBS mode.
In other words, on some platforms a cmdline such as:
$ perf top -e cycles:pp
would fail with -EINVAL.
This patch fixes this bug by properly using INTEL_FLAGS_UEVENT_CONSTRAINT()
when needed in the PEBS constraint tables.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/20190521005246.423-1-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 13 May 2019 11:07:18 +0000 (14:07 +0300)]
Staging: vc04_services: Fix a couple error codes
[ Upstream commit
ca4e4efbefbbdde0a7bb3023ea08d491f4daf9b9 ]
These are accidentally returning positive EINVAL instead of negative
-EINVAL. Some of the callers treat positive values as success.
Fixes:
7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxime Chevallier [Tue, 11 Jun 2019 09:51:43 +0000 (11:51 +0200)]
net: mvpp2: prs: Use the correct helpers when removing all VID filters
[ Upstream commit
6b7a3430c163455cf8a514d636bda52b04654972 ]
When removing all VID filters, the mvpp2_prs_vid_entry_remove would be
called with the TCAM id incorrectly used as a VID, causing the wrong
TCAM entries to be invalidated.
Fix this by directly invalidating entries in the VID range.
Fixes:
56beda3db602 ("net: mvpp2: Add hardware offloading for VLAN filtering")
Suggested-by: Yuri Chipchev <yuric@marvell.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxime Chevallier [Tue, 11 Jun 2019 09:51:42 +0000 (11:51 +0200)]
net: mvpp2: prs: Fix parser range for VID filtering
[ Upstream commit
46b0090a6636cf34c0e856f15dd03e15ba4cdda6 ]
VID filtering is implemented in the Header Parser, with one range of 11
vids being assigned for each no-loopback port.
Make sure we use the per-port range when looking for existing entries in
the Parser.
Since we used a global range instead of a per-port one, this causes VIDs
to be removed from the whitelist from all ports of the same PPv2
instance.
Fixes:
56beda3db602 ("net: mvpp2: Add hardware offloading for VLAN filtering")
Suggested-by: Yuri Chipchev <yuric@marvell.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alaa Hleihel [Sun, 19 May 2019 08:11:49 +0000 (11:11 +0300)]
net/mlx5: Avoid reloading already removed devices
Prior to reloading a device we must first verify that it was not already
removed. Otherwise, the attempt to remove the device will do nothing, and
in that case we will end up proceeding with adding an new device that no
one was expecting to remove, leaving behind used resources such as EQs that
causes a failure to destroy comp EQs and syndrome (0x30f433).
Fix that by making sure that we try to remove and add a device (based on a
protocol) only if the device is already added.
Fixes:
c5447c70594b ("net/mlx5: E-Switch, Reload IB interface when switching devlink modes")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Barber [Sat, 15 Jun 2019 06:42:37 +0000 (23:42 -0700)]
vsock/virtio: set SOCK_DONE on peer shutdown
[ Upstream commit
42f5cda5eaf4396a939ae9bb43bb8d1d09c1b15c ]
Set the SOCK_DONE flag to match the TCP_CLOSING state when a peer has
shut down and there is nothing left to read.
This fixes the following bug:
1) Peer sends SHUTDOWN(RDWR).
2) Socket enters TCP_CLOSING but SOCK_DONE is not set.
3) read() returns -ENOTCONN until close() is called, then returns 0.
Signed-off-by: Stephen Barber <smbarber@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Sun, 16 Jun 2019 09:24:07 +0000 (17:24 +0800)]
tipc: purge deferredq list for each grp member in tipc_group_delete
[ Upstream commit
5cf02612b33f104fe1015b2dfaf1758ad3675588 ]
Syzbot reported a memleak caused by grp members' deferredq list not
purged when the grp is be deleted.
The issue occurs when more(msg_grp_bc_seqno(hdr), m->bc_rcv_nxt) in
tipc_group_filter_msg() and the skb will stay in deferredq.
So fix it by calling __skb_queue_purge for each member's deferredq
in tipc_group_delete() when a tipc sk leaves the grp.
Fixes:
b87a5ea31c93 ("tipc: guarantee group unicast doesn't bypass group broadcast")
Reported-by: syzbot+78fbe679c8ca8d264a8d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Paul Adrian Glaubitz [Tue, 11 Jun 2019 15:38:37 +0000 (17:38 +0200)]
sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg
[ Upstream commit
07a6d63eb1b54b5fb38092780fe618dfe1d96e23 ]
In
d5a2aa24, the name in struct console sunhv_console was changed from "ttyS"
to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged.
This results in the hypervisor console device to be listed as "ttyHV0" under
/proc/consoles while the device node is still named "ttyS0":
root@osaka:~# cat /proc/consoles
ttyHV0 -W- (EC p ) 4:64
tty0 -WU (E ) 4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/
f02836f0/
f0285690/tty/ttyS0
root@osaka:~#
This means that any userland code which tries to determine the name of the
device file of the hypervisor console device can not rely on the information
provided by /proc/consoles. In particular, booting current versions of debian-
installer inside a SPARC LDOM will fail with the installer unable to determine
the console device.
After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well,
the inconsistency is fixed and it is possible again to determine the name
of the device file of the hypervisor console device by reading the contents
of /proc/console:
root@osaka:~# cat /proc/consoles
ttyHV0 -W- (EC p ) 4:64
tty0 -WU (E ) 4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/
f02836f0/
f0285690/tty/ttyHV0
root@osaka:~#
With this change, debian-installer works correctly when installing inside
a SPARC LDOM.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neil Horman [Thu, 13 Jun 2019 10:35:59 +0000 (06:35 -0400)]
sctp: Free cookie before we memdup a new one
[ Upstream commit
ce950f1050cece5e406a5cde723c69bba60e1b26 ]
Based on comments from Xin, even after fixes for our recent syzbot
report of cookie memory leaks, its possible to get a resend of an INIT
chunk which would lead to us leaking cookie memory.
To ensure that we don't leak cookie memory, free any previously
allocated cookie first.
Change notes
v1->v2
update subsystem tag in subject (davem)
repeat kfree check for peer_random and peer_hmacs (xin)
v2->v3
net->sctp
also free peer_chunks
v3->v4
fix subject tags
v4->v5
remove cut line
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com
CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
CC: Xin Long <lucien.xin@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Young Xiao [Fri, 14 Jun 2019 07:13:02 +0000 (15:13 +0800)]
nfc: Ensure presence of required attributes in the deactivate_target handler
[ Upstream commit
385097a3675749cbc9e97c085c0e5dfe4269ca51 ]
Check that the NFC_ATTR_TARGET_INDEX attributes (in addition to
NFC_ATTR_DEVICE_INDEX) are provided by the netlink client prior to
accessing them. This prevents potential unhandled NULL pointer dereference
exceptions which can be triggered by malicious user-mode programs,
if they omit one or both of these attributes.
Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Taehee Yoo [Sun, 9 Jun 2019 14:26:21 +0000 (23:26 +0900)]
net: openvswitch: do not free vport if register_netdevice() is failed.
[ Upstream commit
309b66970ee2abf721ecd0876a48940fa0b99a35 ]
In order to create an internal vport, internal_dev_create() is used and
that calls register_netdevice() internally.
If register_netdevice() fails, it calls dev->priv_destructor() to free
private data of netdev. actually, a private data of this is a vport.
Hence internal_dev_create() should not free and use a vport after failure
of register_netdevice().
Test command
ovs-dpctl add-dp bonding_masters
Splat looks like:
[ 1035.667767] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ 1035.675958] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 1035.676916] CPU: 1 PID: 1028 Comm: ovs-vswitchd Tainted: G B 5.2.0-rc3+ #240
[ 1035.676916] RIP: 0010:internal_dev_create+0x2e5/0x4e0 [openvswitch]
[ 1035.676916] Code: 48 c1 ea 03 80 3c 02 00 0f 85 9f 01 00 00 4c 8b 23 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 60 05 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 86 01 00 00 49 8b bc 24 60 05 00 00 e8 e4 68 f4
[ 1035.713720] RSP: 0018:
ffff88810dcb7578 EFLAGS:
00010206
[ 1035.713720] RAX:
dffffc0000000000 RBX:
ffff88810d13fe08 RCX:
ffffffff84297704
[ 1035.713720] RDX:
00000000000000ac RSI:
0000000000000000 RDI:
0000000000000560
[ 1035.713720] RBP:
00000000ffffffef R08:
fffffbfff0d3b881 R09:
fffffbfff0d3b881
[ 1035.713720] R10:
0000000000000001 R11:
fffffbfff0d3b880 R12:
0000000000000000
[ 1035.768776] R13:
0000607ee460b900 R14:
ffff88810dcb7690 R15:
ffff88810dcb7698
[ 1035.777709] FS:
00007f02095fc980(0000) GS:
ffff88811b400000(0000) knlGS:
0000000000000000
[ 1035.777709] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 1035.777709] CR2:
00007ffdf01d2f28 CR3:
0000000108258000 CR4:
00000000001006e0
[ 1035.777709] Call Trace:
[ 1035.777709] ovs_vport_add+0x267/0x4f0 [openvswitch]
[ 1035.777709] new_vport+0x15/0x1e0 [openvswitch]
[ 1035.777709] ovs_vport_cmd_new+0x567/0xd10 [openvswitch]
[ 1035.777709] ? ovs_dp_cmd_dump+0x490/0x490 [openvswitch]
[ 1035.777709] ? __kmalloc+0x131/0x2e0
[ 1035.777709] ? genl_family_rcv_msg+0xa54/0x1030
[ 1035.777709] genl_family_rcv_msg+0x63a/0x1030
[ 1035.777709] ? genl_unregister_family+0x630/0x630
[ 1035.841681] ? debug_show_all_locks+0x2d0/0x2d0
[ ... ]
Fixes:
cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Thu, 13 Jun 2019 22:25:20 +0000 (00:25 +0200)]
net: dsa: rtl8366: Fix up VLAN filtering
[ Upstream commit
760c80b70bed2cd01630e8595d1bbde910339f31 ]
We get this regression when using RTL8366RB as part of a bridge
with OpenWrt:
WARNING: CPU: 0 PID: 1347 at net/switchdev/switchdev.c:291
switchdev_port_attr_set_now+0x80/0xa4
lan0: Commit of attribute (id=7) failed.
(...)
realtek-smi switch lan0: failed to initialize vlan filtering on this port
This is because it is trying to disable VLAN filtering
on VLAN0, as we have forgot to add 1 to the port number
to get the right VLAN in rtl8366_vlan_filtering(): when
we initialize the VLAN we associate VLAN1 with port 0,
VLAN2 with port 1 etc, so we need to add 1 to the port
offset.
Fixes:
d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sat, 15 Jun 2019 23:28:48 +0000 (16:28 -0700)]
neigh: fix use-after-free read in pneigh_get_next
[ Upstream commit
f3e92cb8e2eb8c27d109e6fd73d3a69a8c09e288 ]
Nine years ago, I added RCU handling to neighbours, not pneighbours.
(pneigh are not commonly used)
Unfortunately I missed that /proc dump operations would use a
common entry and exit point : neigh_seq_start() and neigh_seq_stop()
We need to read_lock(tbl->lock) or risk use-after-free while
iterating the pneigh structures.
We might later convert pneigh to RCU and revert this patch.
sysbot reported :
BUG: KASAN: use-after-free in pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
Read of size 8 at addr
ffff888097f2a700 by task syz-executor.0/9825
CPU: 1 PID: 9825 Comm: syz-executor.0 Not tainted 5.2.0-rc4+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
__kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
kasan_report+0x12/0x20 mm/kasan/common.c:614
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
neigh_seq_next+0xdb/0x210 net/core/neighbour.c:3240
seq_read+0x9cf/0x1110 fs/seq_file.c:258
proc_reg_read+0x1fc/0x2c0 fs/proc/inode.c:221
do_loop_readv_writev fs/read_write.c:714 [inline]
do_loop_readv_writev fs/read_write.c:701 [inline]
do_iter_read+0x4a4/0x660 fs/read_write.c:935
vfs_readv+0xf0/0x160 fs/read_write.c:997
kernel_readv fs/splice.c:359 [inline]
default_file_splice_read+0x475/0x890 fs/splice.c:414
do_splice_to+0x127/0x180 fs/splice.c:877
splice_direct_to_actor+0x2d2/0x970 fs/splice.c:954
do_splice_direct+0x1da/0x2a0 fs/splice.c:1063
do_sendfile+0x597/0xd00 fs/read_write.c:1464
__do_sys_sendfile64 fs/read_write.c:1525 [inline]
__se_sys_sendfile64 fs/read_write.c:1511 [inline]
__x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4592c9
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f4aab51dc78 EFLAGS:
00000246 ORIG_RAX:
0000000000000028
RAX:
ffffffffffffffda RBX:
0000000000000004 RCX:
00000000004592c9
RDX:
0000000000000000 RSI:
0000000000000004 RDI:
0000000000000005
RBP:
000000000075bf20 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000080000000 R11:
0000000000000246 R12:
00007f4aab51e6d4
R13:
00000000004c689d R14:
00000000004db828 R15:
00000000ffffffff
Allocated by task 9827:
save_stack+0x23/0x90 mm/kasan/common.c:71
set_track mm/kasan/common.c:79 [inline]
__kasan_kmalloc mm/kasan/common.c:489 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503
__do_kmalloc mm/slab.c:3660 [inline]
__kmalloc+0x15c/0x740 mm/slab.c:3669
kmalloc include/linux/slab.h:552 [inline]
pneigh_lookup+0x19c/0x4a0 net/core/neighbour.c:731
arp_req_set_public net/ipv4/arp.c:1010 [inline]
arp_req_set+0x613/0x720 net/ipv4/arp.c:1026
arp_ioctl+0x652/0x7f0 net/ipv4/arp.c:1226
inet_ioctl+0x2a0/0x340 net/ipv4/af_inet.c:926
sock_do_ioctl+0xd8/0x2f0 net/socket.c:1043
sock_ioctl+0x3ed/0x780 net/socket.c:1194
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 9824:
save_stack+0x23/0x90 mm/kasan/common.c:71
set_track mm/kasan/common.c:79 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:451
kasan_slab_free+0xe/0x10 mm/kasan/common.c:459
__cache_free mm/slab.c:3432 [inline]
kfree+0xcf/0x220 mm/slab.c:3755
pneigh_ifdown_and_unlock net/core/neighbour.c:812 [inline]
__neigh_ifdown+0x236/0x2f0 net/core/neighbour.c:356
neigh_ifdown+0x20/0x30 net/core/neighbour.c:372
arp_ifdown+0x1d/0x21 net/ipv4/arp.c:1274
inetdev_destroy net/ipv4/devinet.c:319 [inline]
inetdev_event+0xa14/0x11f0 net/ipv4/devinet.c:1544
notifier_call_chain+0xc2/0x230 kernel/notifier.c:95
__raw_notifier_call_chain kernel/notifier.c:396 [inline]
raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:403
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1749
call_netdevice_notifiers_extack net/core/dev.c:1761 [inline]
call_netdevice_notifiers net/core/dev.c:1775 [inline]
rollback_registered_many+0x9b9/0xfc0 net/core/dev.c:8178
rollback_registered+0x109/0x1d0 net/core/dev.c:8220
unregister_netdevice_queue net/core/dev.c:9267 [inline]
unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9260
unregister_netdevice include/linux/netdevice.h:2631 [inline]
__tun_detach+0xd8a/0x1040 drivers/net/tun.c:724
tun_detach drivers/net/tun.c:741 [inline]
tun_chr_close+0xe0/0x180 drivers/net/tun.c:3451
__fput+0x2ff/0x890 fs/file_table.c:280
____fput+0x16/0x20 fs/file_table.c:313
task_work_run+0x145/0x1c0 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:185 [inline]
exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:168
prepare_exit_to_usermode arch/x86/entry/common.c:199 [inline]
syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
do_syscall_64+0x58e/0x680 arch/x86/entry/common.c:304
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at
ffff888097f2a700
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes inside of
64-byte region [
ffff888097f2a700,
ffff888097f2a740)
The buggy address belongs to the page:
page:
ffffea00025fca80 refcount:1 mapcount:0 mapping:
ffff8880aa400340 index:0x0
flags: 0x1fffc0000000200(slab)
raw:
01fffc0000000200 ffffea000250d548 ffffea00025726c8 ffff8880aa400340
raw:
0000000000000000 ffff888097f2a000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888097f2a600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
ffff888097f2a680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>
ffff888097f2a700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ffff888097f2a780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888097f2a800: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
Fixes:
767e97e1e0db ("neigh: RCU conversion of struct neighbour")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremy Sowden [Sun, 16 Jun 2019 15:54:37 +0000 (16:54 +0100)]
lapb: fixed leak of control-blocks.
[ Upstream commit
6be8e297f9bcea666ea85ac7a6cd9d52d6deaf92 ]
lapb_register calls lapb_create_cb, which initializes the control-
block's ref-count to one, and __lapb_insert_cb, which increments it when
adding the new block to the list of blocks.
lapb_unregister calls __lapb_remove_cb, which decrements the ref-count
when removing control-block from the list of blocks, and calls lapb_put
itself to decrement the ref-count before returning.
However, lapb_unregister also calls __lapb_devtostruct to look up the
right control-block for the given net_device, and __lapb_devtostruct
also bumps the ref-count, which means that when lapb_unregister returns
the ref-count is still 1 and the control-block is leaked.
Call lapb_put after __lapb_devtostruct to fix leak.
Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 6 Jun 2019 21:32:34 +0000 (14:32 -0700)]
ipv6: flowlabel: fl6_sock_lookup() must use atomic_inc_not_zero
[ Upstream commit
65a3c497c0e965a552008db8bc2653f62bc925a1 ]
Before taking a refcount, make sure the object is not already
scheduled for deletion.
Same fix is needed in ipv6_flowlabel_opt()
Fixes:
18367681a10b ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haiyang Zhang [Thu, 13 Jun 2019 21:06:53 +0000 (21:06 +0000)]
hv_netvsc: Set probe mode to sync
[ Upstream commit
9a33629ba6b26caebd73e3c581ba1e6068c696a7 ]
For better consistency of synthetic NIC names, we set the probe mode to
PROBE_FORCE_SYNCHRONOUS. So the names can be aligned with the vmbus
channel offer sequence.
Fixes:
af0a5646cb8d ("use the new async probing feature for the hyperv drivers")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Vecera [Fri, 14 Jun 2019 15:48:36 +0000 (17:48 +0200)]
be2net: Fix number of Rx queues used for flow hashing
[ Upstream commit
718f4a2537089ea41903bf357071306163bc7c04 ]
Number of Rx queues used for flow hashing returned by the driver is
incorrect and this bug prevents user to use the last Rx queue in
indirection table.
Let's say we have a NIC with 6 combined queues:
[root@sm-03 ~]# ethtool -l enp4s0f0
Channel parameters for enp4s0f0:
Pre-set maximums:
RX: 5
TX: 5
Other: 0
Combined: 6
Current hardware settings:
RX: 0
TX: 0
Other: 0
Combined: 6
Default indirection table maps all (6) queues equally but the driver
reports only 5 rings available.
[root@sm-03 ~]# ethtool -x enp4s0f0
RX flow hash indirection table for enp4s0f0 with 5 RX ring(s):
0: 0 1 2 3 4 5 0 1
8: 2 3 4 5 0 1 2 3
16: 4 5 0 1 2 3 4 5
24: 0 1 2 3 4 5 0 1
...
Now change indirection table somehow:
[root@sm-03 ~]# ethtool -X enp4s0f0 weight 1 1
[root@sm-03 ~]# ethtool -x enp4s0f0
RX flow hash indirection table for enp4s0f0 with 6 RX ring(s):
0: 0 0 0 0 0 0 0 0
...
64: 1 1 1 1 1 1 1 1
...
Now it is not possible to change mapping back to equal (default) state:
[root@sm-03 ~]# ethtool -X enp4s0f0 equal 6
Cannot set RX flow hash configuration: Invalid argument
Fixes:
594ad54a2c3b ("be2net: Add support for setting and getting rx flow hash options")
Reported-by: Tianhao <tizhao@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sat, 15 Jun 2019 23:40:52 +0000 (16:40 -0700)]
ax25: fix inconsistent lock state in ax25_destroy_timer
[ Upstream commit
d4d5d8e83c9616aeef28a2869cea49cc3fb35526 ]
Before thread in process context uses bh_lock_sock()
we must disable bh.
sysbot reported :
WARNING: inconsistent lock state
5.2.0-rc3+ #32 Not tainted
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
blkid/26581 [HC0[0]:SC1[1]:HE1:SE0] takes:
00000000e0da85ee (slock-AF_AX25){+.?.}, at: spin_lock include/linux/spinlock.h:338 [inline]
00000000e0da85ee (slock-AF_AX25){+.?.}, at: ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
spin_lock include/linux/spinlock.h:338 [inline]
ax25_rt_autobind+0x3ca/0x720 net/ax25/ax25_route.c:429
ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1221
__sys_connect+0x264/0x330 net/socket.c:1834
__do_sys_connect net/socket.c:1845 [inline]
__se_sys_connect net/socket.c:1842 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1842
do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
irq event stamp: 2272
hardirqs last enabled at (2272): [<
ffffffff810065f3>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (2271): [<
ffffffff8100660f>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last enabled at (1522): [<
ffffffff87400654>] __do_softirq+0x654/0x94c kernel/softirq.c:320
softirqs last disabled at (2267): [<
ffffffff81449010>] invoke_softirq kernel/softirq.c:374 [inline]
softirqs last disabled at (2267): [<
ffffffff81449010>] irq_exit+0x180/0x1d0 kernel/softirq.c:414
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(slock-AF_AX25);
<Interrupt>
lock(slock-AF_AX25);
*** DEADLOCK ***
1 lock held by blkid/26581:
#0:
0000000010fd154d ((&ax25->dtimer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:175 [inline]
#0:
0000000010fd154d ((&ax25->dtimer)){+.-.}, at: call_timer_fn+0xe0/0x720 kernel/time/timer.c:1312
stack backtrace:
CPU: 1 PID: 26581 Comm: blkid Not tainted 5.2.0-rc3+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_usage_bug.cold+0x393/0x4a2 kernel/locking/lockdep.c:2935
valid_state kernel/locking/lockdep.c:2948 [inline]
mark_lock_irq kernel/locking/lockdep.c:3138 [inline]
mark_lock+0xd46/0x1370 kernel/locking/lockdep.c:3513
mark_irqflags kernel/locking/lockdep.c:3391 [inline]
__lock_acquire+0x159f/0x5490 kernel/locking/lockdep.c:3745
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
spin_lock include/linux/spinlock.h:338 [inline]
ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
call_timer_fn+0x193/0x720 kernel/time/timer.c:1322
expire_timers kernel/time/timer.c:1366 [inline]
__run_timers kernel/time/timer.c:1685 [inline]
__run_timers kernel/time/timer.c:1653 [inline]
run_timer_softirq+0x66f/0x1740 kernel/time/timer.c:1698
__do_softirq+0x25c/0x94c kernel/softirq.c:293
invoke_softirq kernel/softirq.c:374 [inline]
irq_exit+0x180/0x1d0 kernel/softirq.c:414
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806
</IRQ>
RIP: 0033:0x7f858d5c3232
Code: 8b 61 08 48 8b 84 24 d8 00 00 00 4c 89 44 24 28 48 8b ac 24 d0 00 00 00 4c 8b b4 24 e8 00 00 00 48 89 7c 24 68 48 89 4c 24 78 <48> 89 44 24 58 8b 84 24 e0 00 00 00 89 84 24 84 00 00 00 8b 84 24
RSP: 002b:
00007ffcaf0cf5c0 EFLAGS:
00000206 ORIG_RAX:
ffffffffffffff13
RAX:
00007f858d7d27a8 RBX:
00007f858d7d8820 RCX:
00007f858d3940d8
RDX:
00007ffcaf0cf798 RSI:
00000000f5e616f3 RDI:
00007f858d394fee
RBP:
0000000000000000 R08:
00007ffcaf0cf780 R09:
00007f858d7db480
R10:
0000000000000000 R11:
0000000009691a75 R12:
0000000000000005
R13:
00000000f5e616f3 R14:
0000000000000000 R15:
00007ffcaf0cf798
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 19 Jun 2019 06:18:07 +0000 (08:18 +0200)]
Linux 4.19.53
Baruch Siach [Wed, 5 Dec 2018 15:00:09 +0000 (17:00 +0200)]
rtc: pcf8523: don't return invalid date when battery is low
commit
ecb4a353d3afd45b9bb30c85d03ee113a0589079 upstream.
The RTC_VL_READ ioctl reports the low battery condition. Still,
pcf8523_rtc_read_time() happily returns invalid dates in this case.
Check the battery health on pcf8523_rtc_read_time() to avoid that.
Reported-by: Erik Čuk <erik.cuk@domel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jani Nikula [Mon, 10 Jun 2019 09:30:54 +0000 (12:30 +0300)]
drm: add fallback override/firmware EDID modes workaround
commit
48eaeb7664c76139438724d520a1ea4a84a3ed92 upstream.
We've moved the override and firmware EDID (simply "override EDID" from
now on) handling to the low level drm_do_get_edid() function in order to
transparently use the override throughout the stack. The idea is that
you get the override EDID via the ->get_modes() hook.
Unfortunately, there are scenarios where the DDC probe in drm_get_edid()
called via ->get_modes() fails, although the preceding ->detect()
succeeds.
In the case reported by Paul Wise, the ->detect() hook,
intel_crt_detect(), relies on hotplug detect, bypassing the DDC. In the
case reported by Ilpo Järvinen, there is no ->detect() hook, which is
interpreted as connected. The subsequent DDC probe reached via
->get_modes() fails, and we don't even look at the override EDID,
resulting in no modes being added.
Because drm_get_edid() is used via ->detect() all over the place, we
can't trivially remove the DDC probe, as it leads to override EDID
effectively meaning connector forcing. The goal is that connector
forcing and override EDID remain orthogonal.
Generally, the underlying problem here is the conflation of ->detect()
and ->get_modes() via drm_get_edid(). The former should just detect, and
the latter should just get the modes, typically via reading the EDID. As
long as drm_get_edid() is used in ->detect(), it needs to retain the DDC
probe. Or such users need to have a separate DDC probe step first.
The EDID caching between ->detect() and ->get_modes() done by some
drivers is a further complication that prevents us from making
drm_do_get_edid() adapt to the two cases.
Work around the regression by falling back to a separate attempt at
getting the override EDID at drm_helper_probe_single_connector_modes()
level. With a working DDC and override EDID, it'll never be called; the
override EDID will come via ->get_modes(). There will still be a failing
DDC probe attempt in the cases that require the fallback.
v2:
- Call drm_connector_update_edid_property (Paul)
- Update commit message about EDID caching (Daniel)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107583
Reported-by: Paul Wise <pabs3@bonedaddy.net>
Cc: Paul Wise <pabs3@bonedaddy.net>
References: http://mid.mail-archive.com/alpine.DEB.2.20.
1905262211270.24390@whs-18.cs.helsinki.fi
Reported-by: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi>
Cc: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
References:
15f080f08d48 ("drm/edid: respect connector force for drm_get_edid ddc probe")
Fixes:
53fd40a90f3c ("drm: handle override and firmware EDID at drm_do_get_edid() level")
Cc: <stable@vger.kernel.org> # v4.15+ 56a2b7f2a39a drm/edid: abstract override/firmware EDID retrieval
Cc: <stable@vger.kernel.org> # v4.15+
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Tested-by: Paul Wise <pabs3@bonedaddy.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610093054.28445-1-jani.nikula@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jani Nikula [Fri, 7 Jun 2019 11:05:12 +0000 (14:05 +0300)]
drm/edid: abstract override/firmware EDID retrieval
commit
56a2b7f2a39a8d4b16a628e113decde3d7400879 upstream.
Abstract the debugfs override and the firmware EDID retrieval
function. We'll be needing it in the follow-up. No functional changes.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Tested-by: Paul Wise <pabs3@bonedaddy.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607110513.12072-1-jani.nikula@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prarit Bhargava [Mon, 10 Jun 2019 17:15:44 +0000 (13:15 -0400)]
x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled
commit
c7563e62a6d720aa3b068e26ddffab5f0df29263 upstream.
Booting with kernel parameter "rdt=cmt,mbmtotal,memlocal,l3cat,mba" and
executing "mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl" results in
a NULL pointer dereference on systems which do not have local MBM support
enabled..
BUG: kernel NULL pointer dereference, address:
0000000000000020
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 722 Comm: kworker/0:3 Not tainted 5.2.0-0.rc3.git0.1.el7_UNSUPPORTED.x86_64 #2
Workqueue: events mbm_handle_overflow
RIP: 0010:mbm_handle_overflow+0x150/0x2b0
Only enter the bandwith update loop if the system has local MBM enabled.
Fixes:
de73f38f7680 ("x86/intel_rdt/mba_sc: Feedback loop to dynamically update mem bandwidth")
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190610171544.13474-1-prarit@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baoquan He [Thu, 23 May 2019 02:57:44 +0000 (10:57 +0800)]
x86/mm/KASLR: Compute the size of the vmemmap section properly
commit
00e5a2bbcc31d5fea853f8daeba0f06c1c88c3ff upstream.
The size of the vmemmap section is hardcoded to 1 TB to support the
maximum amount of system RAM in 4-level paging mode - 64 TB.
However, 1 TB is not enough for vmemmap in 5-level paging mode. Assuming
the size of struct page is 64 Bytes, to support 4 PB system RAM in 5-level,
64 TB of vmemmap area is needed:
4 * 1000^5 PB / 4096 bytes page size * 64 bytes per page struct / 1000^4 TB = 62.5 TB.
This hardcoding may cause vmemmap to corrupt the following
cpu_entry_area section, if KASLR puts vmemmap very close to it and the
actual vmemmap size is bigger than 1 TB.
So calculate the actual size of the vmemmap region needed and then align
it up to 1 TB boundary.
In 4-level paging mode it is always 1 TB. In 5-level it's adjusted on
demand. The current code reserves 0.5 PB for vmemmap on 5-level. With
this change, the space can be saved and thus used to increase entropy
for the randomization.
[ bp: Spell out how the 64 TB needed for vmemmap is computed and massage commit
message. ]
Fixes:
eedb92abb9bb ("x86/mm: Make virtual memory layout dynamic for CONFIG_X86_5LEVEL=y")
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Kirill A. Shutemov <kirill@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: kirill.shutemov@linux.intel.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190523025744.3756-1-bhe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Ryabinin [Fri, 14 Jun 2019 14:31:49 +0000 (17:31 +0300)]
x86/kasan: Fix boot with 5-level paging and KASAN
commit
f3176ec9420de0c385023afa3e4970129444ac2f upstream.
Since commit
d52888aa2753 ("x86/mm: Move LDT remap out of KASLR region on
5-level paging") kernel doesn't boot with KASAN on 5-level paging machines.
The bug is actually in early_p4d_offset() and introduced by commit
12a8cc7fcf54 ("x86/kasan: Use the same shadow offset for 4- and 5-level paging")
early_p4d_offset() tries to convert pgd_val(*pgd) value to a physical
address. This doesn't make sense because pgd_val() already contains the
physical address.
It did work prior to commit
d52888aa2753 because the result of
"__pa_nodebug(pgd_val(*pgd)) & PTE_PFN_MASK" was the same as "pgd_val(*pgd)
& PTE_PFN_MASK". __pa_nodebug() just set some high bits which were masked
out by applying PTE_PFN_MASK.
After the change of the PAGE_OFFSET offset in commit
d52888aa2753
__pa_nodebug(pgd_val(*pgd)) started to return a value with more high bits
set and PTE_PFN_MASK wasn't enough to mask out all of them. So it returns a
wrong not even canonical address and crashes on the attempt to dereference
it.
Switch back to pgd_val() & PTE_PFN_MASK to cure the issue.
Fixes:
12a8cc7fcf54 ("x86/kasan: Use the same shadow offset for 4- and 5-level paging")
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Cc: stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190614143149.2227-1-aryabinin@virtuozzo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Thu, 13 Jun 2019 13:49:02 +0000 (15:49 +0200)]
x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback
commit
78f4e932f7760d965fb1569025d1576ab77557c5 upstream.
Adric Blake reported the following warning during suspend-resume:
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0000000000000000) \
at rIP: 0xffffffff8d267924 (native_write_msr+0x4/0x20)
Call Trace:
intel_set_tfa
intel_pmu_cpu_starting
? x86_pmu_dead_cpu
x86_pmu_starting_cpu
cpuhp_invoke_callback
? _raw_spin_lock_irqsave
notify_cpu_starting
start_secondary
secondary_startup_64
microcode: sig=0x806ea, pf=0x80, revision=0x96
microcode: updated to revision 0xb4, date = 2019-04-01
CPU1 is up
The MSR in question is MSR_TFA_RTM_FORCE_ABORT and that MSR is emulated
by microcode. The log above shows that the microcode loader callback
happens after the PMU restoration, leading to the conjecture that
because the microcode hasn't been updated yet, that MSR is not present
yet, leading to the #GP.
Add a microcode loader-specific hotplug vector which comes before
the PERF vectors and thus executes earlier and makes sure the MSR is
present.
Fixes:
400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort")
Reported-by: Adric Blake <promarbler14@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: x86@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203637
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Sat, 20 Apr 2019 11:27:51 +0000 (13:27 +0200)]
RAS/CEC: Fix binary search function
commit
f3c74b38a55aefe1004200d15a83f109b510068c upstream.
Switch to using Donald Knuth's binary search algorithm (The Art of
Computer Programming, vol. 3, section 6.2.1). This should've been done
from the very beginning but the author must've been smoking something
very potent at the time.
The problem with the current one was that it would return the wrong
element index in certain situations:
https://lkml.kernel.org/r/CAM_iQpVd02zkVJ846cj-Fg1yUNuz6tY5q1Vpj4LrXmE06dPYYg@mail.gmail.com
and the noodling code after the loop was fishy at best.
So switch to using Knuth's binary search. The final result is much
cleaner and straightforward.
Fixes:
011d82611172 ("RAS: Add a Corrected Errors Collector")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Tue, 16 Apr 2019 21:33:51 +0000 (14:33 -0700)]
RAS/CEC: Convert the timer callback to a workqueue
commit
0ade0b6240c4853cf9725924c46c10f4251639d7 upstream.
cec_timer_fn() is a timer callback which reads ce_arr.array[] and
updates its decay values. However, it runs in interrupt context and the
mutex protection the CEC uses for that array, is inadequate. Convert the
used timer to a workqueue to keep the tasks the CEC performs preemptible
and thus low-prio.
[ bp: Rewrite commit message.
s/timer/decay/gi to make it agnostic as to what facility is used. ]
Fixes:
011d82611172 ("RAS: Add a Corrected Errors Collector")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190416213351.28999-2-xiyou.wangcong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Thu, 13 Jun 2019 19:40:45 +0000 (21:40 +0200)]
timekeeping: Repair ktime_get_coarse*() granularity
commit
e3ff9c3678b4d80e22d2557b68726174578eaf52 upstream.
Jason reported that the coarse ktime based time getters advance only once
per second and not once per tick as advertised.
The code reads only the monotonic base time, which advances once per
second. The nanoseconds are accumulated on every tick in xtime_nsec up to
a second and the regular time getters take this nanoseconds offset into
account, but the ktime_get_coarse*() implementation fails to do so.
Add the accumulated xtime_nsec value to the monotonic base time to get the
proper per tick advancing coarse tinme.
Fixes:
b9ff604cff11 ("timekeeping: Add ktime_get_coarse_with_offset")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1906132136280.1791@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Palmas [Wed, 15 May 2019 15:27:49 +0000 (17:27 +0200)]
USB: serial: option: add Telit 0x1260 and 0x1261 compositions
commit
f3dfd4072c3ee6e287f501a18b5718b185d6a940 upstream.
Added support for Telit LE910Cx 0x1260 and 0x1261 compositions.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jörgen Storvist [Mon, 13 May 2019 16:37:52 +0000 (18:37 +0200)]
USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode
commit
5417a7e482962952e622eabd60cd3600dd65dedf upstream.
Added IDs for Simcom SIM7500/SIM7600 series cellular module in RNDIS
mode. Reserved the interface for ADB.
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1e0e ProdID=9011 Rev=03.18
S: Manufacturer=SimTech, Incorporated
S: Product=SimTech, Incorporated
S: SerialNumber=
0123456789ABCDEF
C: #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host
I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Packham [Tue, 14 May 2019 05:35:42 +0000 (17:35 +1200)]
USB: serial: pl2303: add Allied Telesis VT-Kit3
commit
c5f81656a18b271976a86724dadd8344e54de74e upstream.
This is adds the vendor and device id for the AT-VT-Kit3 which is a
pl2303-based device.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kai-Heng Feng [Mon, 3 Jun 2019 16:20:49 +0000 (00:20 +0800)]
USB: usb-storage: Add new ID to ums-realtek
commit
1a6dd3fea131276a4fc44ae77b0f471b0b473577 upstream.
There is one more Realtek card reader requires ums-realtek to work
correctly.
Add the device ID to support it.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marco Zatta [Sat, 1 Jun 2019 07:52:57 +0000 (09:52 +0200)]
USB: Fix chipmunk-like voice when using Logitech C270 for recording audio.
commit
bd21f0222adab64974b7d1b4b8c7ce6b23e9ea4d upstream.
This patch fixes the chipmunk-like voice that manifets randomly when
using the integrated mic of the Logitech Webcam HD C270.
The issue was solved initially for this device by commit
2394d67e446b
("USB: add RESET_RESUME for webcams shown to be quirky") but it was then
reintroduced by
e387ef5c47dd ("usb: Add USB_QUIRK_RESET_RESUME for all
Logitech UVC webcams"). This patch is to have the fix back.
Signed-off-by: Marco Zatta <marco@zatta.me>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Douglas Anderson [Fri, 31 May 2019 20:04:12 +0000 (13:04 -0700)]
usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression)
commit
babd183915e91a64e976b9e8ab682bb56624df76 upstream.
In commit
abb621844f6a ("usb: ch9: make usb_endpoint_maxp() return
only packet size") the API to usb_endpoint_maxp() changed. It used to
just return wMaxPacketSize but after that commit it returned
wMaxPacketSize with the high bits (the multiplier) masked off. If you
wanted to get the multiplier it was now up to your code to call the
new usb_endpoint_maxp_mult() which was introduced in
commit
541b6fe63023 ("usb: add helper to extract bits 12:11 of
wMaxPacketSize").
Prior to the API change most host drivers were updated, but no update
was made to dwc2. Presumably it was assumed that dwc2 was too
simplistic to use the multiplier and thus just didn't support a
certain class of USB devices. However, it turns out that dwc2 did use
the multiplier and many devices using it were working quite nicely.
That means that many USB devices have been broken since the API
change. One such device is a Logitech HD Pro Webcam C920.
Specifically, though dwc2 didn't directly call usb_endpoint_maxp(), it
did call usb_maxpacket() which in turn called usb_endpoint_maxp().
Let's update dwc2 to work properly with the new API.
Fixes:
abb621844f6a ("usb: ch9: make usb_endpoint_maxp() return only packet size")
Cc: stable@vger.kernel.org
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Schiller [Mon, 18 Feb 2019 06:37:30 +0000 (07:37 +0100)]
usb: dwc2: Fix DMA cache alignment issues
commit
4a4863bf2e7932e584a3a462d3c6daf891142ddc upstream.
Insert a padding between data and the stored_xfer_buffer pointer to
ensure they are not on the same cache line.
Otherwise, the stored_xfer_buffer gets corrupted for IN URBs on
non-cache-coherent systems. (In my case: Lantiq xRX200 MIPS)
Fixes:
3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more supported way")
Fixes:
56406e017a88 ("usb: dwc2: Fix DMA alignment to start at allocated boundary")
Cc: <stable@vger.kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Murray McAllister [Sat, 11 May 2019 06:01:37 +0000 (18:01 +1200)]
drm/vmwgfx: NULL pointer dereference from vmw_cmd_dx_view_define()
commit
bcd6aa7b6cbfd6f985f606c6f76046d782905820 upstream.
If SVGA_3D_CMD_DX_DEFINE_RENDERTARGET_VIEW is called with a surface
ID of SVGA3D_INVALID_ID, the srf struct will remain NULL after
vmw_cmd_res_check(), leading to a null pointer dereference in
vmw_view_add().
Cc: <stable@vger.kernel.org>
Fixes:
d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Signed-off-by: Murray McAllister <murray.mcallister@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Murray McAllister [Mon, 20 May 2019 09:57:34 +0000 (21:57 +1200)]
drm/vmwgfx: integer underflow in vmw_cmd_dx_set_shader() leading to an invalid read
commit
5ed7f4b5eca11c3c69e7c8b53e4321812bc1ee1e upstream.
If SVGA_3D_CMD_DX_SET_SHADER is called with a shader ID
of SVGA3D_INVALID_ID, and a shader type of
SVGA3D_SHADERTYPE_INVALID, the calculated binding.shader_slot
will be
4294967295, leading to an out-of-bounds read in vmw_binding_loc()
when the offset is calculated.
Cc: <stable@vger.kernel.org>
Fixes:
d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Signed-off-by: Murray McAllister <murray.mcallister@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Raspl [Sun, 21 Apr 2019 13:26:24 +0000 (15:26 +0200)]
tools/kvm_stat: fix fields filter for child events
[ Upstream commit
883d25e70b2f699fed9017e509d1ef8e36229b89 ]
The fields filter would not work with child fields, as the respective
parents would not be included. No parents displayed == no childs displayed.
To reproduce, run on s390 (would work on other platforms, too, but would
require a different filter name):
- Run 'kvm_stat -d'
- Press 'f'
- Enter 'instruct'
Notice that events like instruction_diag_44 or instruction_diag_500 are not
displayed - the output remains empty.
With this patch, we will filter by matching events and their parents.
However, consider the following example where we filter by
instruction_diag_44:
kvm statistics - summary
regex filter: instruction_diag_44
Event Total %Total CurAvg/s
exit_instruction 276 100.0 12
instruction_diag_44 256 92.8 11
Total 276 12
Note that the parent ('exit_instruction') displays the total events, but
the childs listed do not match its total (256 instead of 276). This is
intended (since we're filtering all but one child), but might be confusing
on first sight.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian Borntraeger [Fri, 24 May 2019 14:06:23 +0000 (16:06 +0200)]
KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION
[ Upstream commit
19ec166c3f39fe1d3789888a74cc95544ac266d4 ]
kselftests exposed a problem in the s390 handling for memory slots.
Right now we only do proper memory slot handling for creation of new
memory slots. Neither MOVE, nor DELETION are handled properly. Let us
implement those.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Bonzini [Mon, 20 May 2019 15:34:30 +0000 (17:34 +0200)]
KVM: x86/pmu: do not mask the value that is written to fixed PMUs
[ Upstream commit
2924b52117b2812e9633d5ea337333299166d373 ]
According to the SDM, for MSR_IA32_PERFCTR0/1 "the lower-order 32 bits of
each MSR may be written with any value, and the high-order 8 bits are
sign-extended according to the value of bit 31", but the fixed counters
in real hardware are limited to the width of the fixed counters ("bits
beyond the width of the fixed-function counter are reserved and must be
written as zeros"). Fix KVM to do the same.
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Bonzini [Mon, 20 May 2019 15:20:40 +0000 (17:20 +0200)]
KVM: x86/pmu: mask the result of rdpmc according to the width of the counters
[ Upstream commit
0e6f467ee28ec97f68c7b74e35ec1601bb1368a7 ]
This patch will simplify the changes in the next, by enforcing the
masking of the counters to RDPMC and RDMSR.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Morse [Wed, 22 May 2019 17:47:05 +0000 (18:47 +0100)]
KVM: arm/arm64: Move cc/it checks under hyp's Makefile to avoid instrumentation
[ Upstream commit
623e1528d4090bd1abaf93ec46f047dee9a6fb32 ]
KVM has helpers to handle the condition codes of trapped aarch32
instructions. These are marked __hyp_text and used from HYP, but they
aren't built by the 'hyp' Makefile, which has all the runes to avoid ASAN
and KCOV instrumentation.
Move this code to a new hyp/aarch32.c to avoid a hyp-panic when starting
an aarch32 guest on a host built with the ASAN/KCOV debug options.
Fixes:
021234ef3752f ("KVM: arm64: Make kvm_condition_valid32() accessible from EL2")
Fixes:
8cebe750c4d9a ("arm64: KVM: Make kvm_skip_instr32 available to HYP")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bernd Eckstein [Mon, 20 May 2019 15:31:09 +0000 (17:31 +0200)]
usbnet: ipheth: fix racing condition
[ Upstream commit
94d250fae48e6f873d8362308f5c4d02cd1b1fd2 ]
Fix a racing condition in ipheth.c that can lead to slow performance.
Bug: In ipheth_tx(), netif_wake_queue() may be called on the callback
ipheth_sndbulk_callback(), _before_ netif_stop_queue() is called.
When this happens, the queue is stopped longer than it needs to be,
thus reducing network performance.
Fix: Move netif_stop_queue() in front of usb_submit_urb(). Now the order
is always correct. In case, usb_submit_urb() fails, the queue is woken up
again as callback will not fire.
Testing: This racing condition is usually not noticeable, as it has to
occur very frequently to slowdown the network. The callback from the USB
is usually triggered slow enough, so the situation does not appear.
However, on a Ubuntu Linux on VMWare Workstation, running on Windows 10,
the we loose the race quite often and the following speedup can be noticed:
Without this patch: Download: 4.10 Mbit/s, Upload: 4.01 Mbit/s
With this patch: Download: 36.23 Mbit/s, Upload: 17.61 Mbit/s
Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com>
Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Zanussi [Thu, 18 Apr 2019 15:18:50 +0000 (10:18 -0500)]
tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_elts
[ Upstream commit
55267c88c003a3648567beae7c90512d3e2ab15e ]
hist_field_var_ref() is an implementation of hist_field_fn_t(), which
can be called with a null tracing_map_elt elt param when assembling a
key in event_hist_trigger().
In the case of hist_field_var_ref() this doesn't make sense, because a
variable can only be resolved by looking it up using an already
assembled key i.e. a variable can't be used to assemble a key since
the key is required in order to access the variable.
Upper layers should prevent the user from constructing a key using a
variable in the first place, but in case one slips through, it
shouldn't cause a NULL pointer dereference. Also if one does slip
through, we want to know about it, so emit a one-time warning in that
case.
Link: http://lkml.kernel.org/r/64ec8dc15c14d305295b64cdfcc6b2b9dd14753f.1555597045.git.tom.zanussi@linux.intel.com
Reported-by: Vincent Bernat <vincent@bernat.ch>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Mon, 20 May 2019 22:37:49 +0000 (15:37 -0700)]
selftests/timers: Add missing fflush(stdout) calls
[ Upstream commit
fe48319243a626c860fd666ca032daacc2ba84a5 ]
When running under a pipe, some timer tests would not report output in
real-time because stdout flushes were missing after printf()s that lacked
a newline. This adds them to restore real-time status output that humans
can enjoy.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Mon, 20 May 2019 04:36:54 +0000 (12:36 +0800)]
selftests: fib_rule_tests: fix local IPv4 address typo
[ Upstream commit
fc82d93e57e3d41f79eff19031588b262fc3d0b6 ]
The IPv4 testing address are all in 192.51.100.0 subnet. It doesn't make
sense to set a 198.51.100.1 local address. Should be a typo.
Fixes:
65b2b4939a64 ("selftests: net: initial fib rule tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Thu, 16 May 2019 16:04:53 +0000 (12:04 -0400)]
libnvdimm: Fix compilation warnings with W=1
[ Upstream commit
c01dafad77fea8d64c4fdca0a6031c980842ad65 ]
Several places (dimm_devs.c, core.c etc) include label.h but only
label.c uses NSINDEX_SIGNATURE, so move its definition to label.c
instead.
In file included from drivers/nvdimm/dimm_devs.c:23:
drivers/nvdimm/label.h:41:19: warning: 'NSINDEX_SIGNATURE' defined but
not used [-Wunused-const-variable=]
Also, some places abuse "/**" which is only reserved for the kernel-doc.
drivers/nvdimm/bus.c:648: warning: cannot understand function prototype:
'struct attribute_group nd_device_attribute_group = '
drivers/nvdimm/bus.c:677: warning: cannot understand function prototype:
'struct attribute_group nd_numa_attribute_group = '
Those are just some member assignments for the "struct attribute_group"
instances and it can't be expressed in the kernel-doc.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Sat, 4 May 2019 16:48:29 +0000 (17:48 +0100)]
scsi: bnx2fc: fix incorrect cast to u64 on shift operation
[ Upstream commit
d0c0d902339249c75da85fd9257a86cbb98dfaa5 ]
Currently an int is being shifted and the result is being cast to a u64
which leads to undefined behaviour if the shift is more than 31 bits. Fix
this by casting the integer value 1 to u64 before the shift operation.
Addresses-Coverity: ("Bad shift operation")
Fixes:
7b594769120b ("[SCSI] bnx2fc: Handle REC_TOV error code from firmware")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steffen Dirkwinkel [Thu, 2 May 2019 13:03:51 +0000 (15:03 +0200)]
platform/x86: pmc_atom: Add several Beckhoff Automation boards to critclk_systems DMI table
[ Upstream commit
d6423bd03031c020121da26c41a26bd5cc6d0da3 ]
There are several Beckhoff Automation industrial PC boards which use
pmc_plt_clk* clocks for ethernet controllers. This adds affected boards
to critclk_systems DMI table so the clocks are marked as CLK_CRITICAL and
not turned off.
Fixes:
648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Mon, 29 Apr 2019 15:01:35 +0000 (17:01 +0200)]
platform/x86: pmc_atom: Add Lex 3I380D industrial PC to critclk_systems DMI table
[ Upstream commit
3d0818f5eba80fbe4c0addbfe6ddb2d19dc82cd4 ]
The Lex 3I380D industrial PC has 4 ethernet controllers on board
which need pmc_plt_clk0 - 3 to function, add it to the critclk_systems
DMI table, so that drivers/clk/x86/clk-pmc-atom.c will mark the clocks
as CLK_CRITICAL and they will not get turned off.
Fixes:
648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reported-and-tested-by: Semyon Verchenko <semverchenko@factor-ts.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yufen Yu [Fri, 17 May 2019 02:30:07 +0000 (19:30 -0700)]
nvme: fix memory leak for power latency tolerance
[ Upstream commit
510a405d945bc985abc513fafe45890cac34fafa ]
Unconditionally hide device pm latency tolerance when uninitializing
the controller to ensure all qos resources are released so that we're
not leaking this memory. This is safe to call if none were allocated in
the first place, or were previously freed.
Fixes:
c5552fde102fc("nvme: Enable autonomous power state transitions")
Suggested-by: Keith Busch <keith.busch@intel.com>
Tested-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
[changelog]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Fri, 17 May 2019 09:47:36 +0000 (11:47 +0200)]
nvme: release namespace SRCU protection before performing controller ioctls
[ Upstream commit
5fb4aac756acacf260b9ebd88747251effa3a2f2 ]
Holding the SRCU critical section protecting the namespace list can
cause deadlocks when using the per-namespace admin passthrough ioctl to
delete as namespace. Release it earlier when performing per-controller
ioctls to avoid that.
Reported-by: Kenneth Heitke <kenneth.heitke@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Fri, 17 May 2019 09:47:35 +0000 (02:47 -0700)]
nvme: merge nvme_ns_ioctl into nvme_ioctl
[ Upstream commit
90ec611adcf20b96d0c2b7166497d53e4301a57f ]
Merge the two functions to make future changes a little easier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Fri, 17 May 2019 09:47:34 +0000 (02:47 -0700)]
nvme: remove the ifdef around nvme_nvm_ioctl
[ Upstream commit
3f98bcc58cd5f1e4668db289dcab771874cc0920 ]
We already have a proper stub if lightnvm is not enabled, so don't bother
with the ifdef.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Fri, 17 May 2019 09:47:33 +0000 (02:47 -0700)]
nvme: fix srcu locking on error return in nvme_get_ns_from_disk
[ Upstream commit
100c815cbd56480b3e31518475b04719c363614a ]
If we can't get a namespace don't leak the SRCU lock. nvme_ioctl was
working around this, but nvme_pr_command wasn't handling this properly.
Just do what callers would usually expect.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Rutland [Tue, 14 May 2019 09:00:06 +0000 (14:30 +0530)]
arm64/mm: Inhibit huge-vmap with ptdump
[ Upstream commit
7ba36eccb3f83983a651efd570b4f933ecad1b5c ]
The arm64 ptdump code can race with concurrent modification of the
kernel page tables. At the time this was added, this was sound as:
* Modifications to leaf entries could result in stale information being
logged, but would not result in a functional problem.
* Boot time modifications to non-leaf entries (e.g. freeing of initmem)
were performed when the ptdump code cannot be invoked.
* At runtime, modifications to non-leaf entries only occurred in the
vmalloc region, and these were strictly additive, as intermediate
entries were never freed.
However, since commit:
commit
324420bf91f6 ("arm64: add support for ioremap() block mappings")
... it has been possible to create huge mappings in the vmalloc area at
runtime, and as part of this existing intermediate levels of table my be
removed and freed.
It's possible for the ptdump code to race with this, and continue to
walk tables which have been freed (and potentially poisoned or
reallocated). As a result of this, the ptdump code may dereference bogus
addresses, which could be fatal.
Since huge-vmap is a TLB and memory optimization, we can disable it when
the runtime ptdump code is in use to avoid this problem.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes:
324420bf91f60582 ("arm64: add support for ioremap() block mappings")
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Tue, 7 May 2019 00:26:49 +0000 (17:26 -0700)]
scsi: lpfc: add check for loss of ndlp when sending RRQ
[ Upstream commit
c8cb261a072c88ca1aff0e804a30db4c7606521b ]
There was a missing qualification of a valid ndlp structure when calling to
send an RRQ for an abort. Add the check.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Tue, 7 May 2019 00:26:48 +0000 (17:26 -0700)]
scsi: lpfc: correct rcu unlock issue in lpfc_nvme_info_show
[ Upstream commit
79080d349f7f58a2e86c56043a3d04184d5f294a ]
Many of the exit cases were not releasing the rcu read lock. Corrected the
exit paths.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Wed, 24 Apr 2019 08:02:56 +0000 (16:02 +0800)]
scsi: qedi: remove set but not used variables 'cdev' and 'udev'
[ Upstream commit
d0adee5d12752256ff0c87ad7f002f21fe49d618 ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/qedi/qedi_iscsi.c: In function 'qedi_ep_connect':
drivers/scsi/qedi/qedi_iscsi.c:813:23: warning: variable 'udev' set but not used [-Wunused-but-set-variable]
drivers/scsi/qedi/qedi_iscsi.c:812:18: warning: variable 'cdev' set but not used [-Wunused-but-set-variable]
These have never been used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Sat, 20 Apr 2019 04:05:54 +0000 (12:05 +0800)]
scsi: qedi: remove memset/memcpy to nfunc and use func instead
[ Upstream commit
c09581a52765a85f19fc35340127396d5e3379cc ]
KASAN reports this:
BUG: KASAN: global-out-of-bounds in qedi_dbg_err+0xda/0x330 [qedi]
Read of size 31 at addr
ffffffffc12b0ae0 by task syz-executor.0/2429
CPU: 0 PID: 2429 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
print_address_description+0x1c4/0x270 mm/kasan/report.c:187
kasan_report+0x149/0x18d mm/kasan/report.c:317
memcpy+0x1f/0x50 mm/kasan/common.c:130
qedi_dbg_err+0xda/0x330 [qedi]
? 0xffffffffc12d0000
qedi_init+0x118/0x1000 [qedi]
? 0xffffffffc12d0000
? 0xffffffffc12d0000
? 0xffffffffc12d0000
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f2d57e55c58 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
RAX:
ffffffffffffffda RBX:
000000000073bfa0 RCX:
0000000000462e99
RDX:
0000000000000000 RSI:
00000000200003c0 RDI:
0000000000000003
RBP:
00007f2d57e55c70 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f2d57e566bc
R13:
00000000004bcefb R14:
00000000006f7030 R15:
0000000000000004
The buggy address belongs to the variable:
__func__.67584+0x0/0xffffffffffffd520 [qedi]
Memory state around the buggy address:
ffffffffc12b0980: fa fa fa fa 00 04 fa fa fa fa fa fa 00 00 05 fa
ffffffffc12b0a00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 05 fa fa
>
ffffffffc12b0a80: fa fa fa fa 00 06 fa fa fa fa fa fa 00 02 fa fa
^
ffffffffc12b0b00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 00 03 fa
ffffffffc12b0b80: fa fa fa fa 00 00 02 fa fa fa fa fa 00 00 04 fa
Currently the qedi_dbg_* family of functions can overrun the end of the
source string if it is less than the destination buffer length because of
the use of a fixed sized memcpy. Remove the memset/memcpy calls to nfunc
and just use func instead as it is always a null terminated string.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randall Huang [Thu, 11 Apr 2019 08:26:46 +0000 (16:26 +0800)]
f2fs: fix to avoid accessing xattr across the boundary
[ Upstream commit
2777e654371dd4207a3a7f4fb5fa39550053a080 ]
When we traverse xattr entries via __find_xattr(),
if the raw filesystem content is faked or any hardware failure occurs,
out-of-bound error can be detected by KASAN.
Fix the issue by introducing boundary check.
[ 38.402878] c7 1827 BUG: KASAN: slab-out-of-bounds in f2fs_getxattr+0x518/0x68c
[ 38.402891] c7 1827 Read of size 4 at addr
ffffffc0b6fb35dc by task
[ 38.402935] c7 1827 Call trace:
[ 38.402952] c7 1827 [<
ffffff900809003c>] dump_backtrace+0x0/0x6bc
[ 38.402966] c7 1827 [<
ffffff9008090030>] show_stack+0x20/0x2c
[ 38.402981] c7 1827 [<
ffffff900871ab10>] dump_stack+0xfc/0x140
[ 38.402995] c7 1827 [<
ffffff9008325c40>] print_address_description+0x80/0x2d8
[ 38.403009] c7 1827 [<
ffffff900832629c>] kasan_report_error+0x198/0x1fc
[ 38.403022] c7 1827 [<
ffffff9008326104>] kasan_report_error+0x0/0x1fc
[ 38.403037] c7 1827 [<
ffffff9008325000>] __asan_load4+0x1b0/0x1b8
[ 38.403051] c7 1827 [<
ffffff90085fcc44>] f2fs_getxattr+0x518/0x68c
[ 38.403066] c7 1827 [<
ffffff90085fc508>] f2fs_xattr_generic_get+0xb0/0xd0
[ 38.403080] c7 1827 [<
ffffff9008395708>] __vfs_getxattr+0x1f4/0x1fc
[ 38.403096] c7 1827 [<
ffffff9008621bd0>] inode_doinit_with_dentry+0x360/0x938
[ 38.403109] c7 1827 [<
ffffff900862d6cc>] selinux_d_instantiate+0x2c/0x38
[ 38.403123] c7 1827 [<
ffffff900861b018>] security_d_instantiate+0x68/0x98
[ 38.403136] c7 1827 [<
ffffff9008377db8>] d_splice_alias+0x58/0x348
[ 38.403149] c7 1827 [<
ffffff900858d16c>] f2fs_lookup+0x608/0x774
[ 38.403163] c7 1827 [<
ffffff900835eacc>] lookup_slow+0x1e0/0x2cc
[ 38.403177] c7 1827 [<
ffffff9008367fe0>] walk_component+0x160/0x520
[ 38.403190] c7 1827 [<
ffffff9008369ef4>] path_lookupat+0x110/0x2b4
[ 38.403203] c7 1827 [<
ffffff900835dd38>] filename_lookup+0x1d8/0x3a8
[ 38.403216] c7 1827 [<
ffffff900835eeb0>] user_path_at_empty+0x54/0x68
[ 38.403229] c7 1827 [<
ffffff9008395f44>] SyS_getxattr+0xb4/0x18c
[ 38.403241] c7 1827 [<
ffffff9008084200>] el0_svc_naked+0x34/0x38
Signed-off-by: Randall Huang <huangrandall@google.com>
[Jaegeuk Kim: Fix wrong ending boundary]
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Young Xiao [Fri, 12 Apr 2019 07:45:06 +0000 (15:45 +0800)]
Drivers: misc: fix out-of-bounds access in function param_set_kgdbts_var
[ Upstream commit
b281218ad4311a0342a40cb02fb17a363df08b48 ]
There is an out-of-bounds access to "config[len - 1]" array when the
variable "len" is zero.
See commit
dada6a43b040 ("kgdboc: fix KASAN global-out-of-bounds bug
in param_set_kgdboc_var()") for details.
Signed-off-by: Young Xiao <YangX92@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasily Gorbik [Tue, 23 Apr 2019 13:36:36 +0000 (15:36 +0200)]
s390/kasan: fix strncpy_from_user kasan checks
[ Upstream commit
01eb42afb45719cb41bb32c278e068073738899d ]
arch/s390/lib/uaccess.c is built without kasan instrumentation. Kasan
checks are performed explicitly in copy_from_user/copy_to_user
functions. But since those functions could be inlined, calls from
files like uaccess.c with instrumentation disabled won't generate
kasan reports. This is currently the case with strncpy_from_user
function which was revealed by newly added kasan test. Avoid inlining of
copy_from_user/copy_to_user when the kernel is built with kasan support
to make sure kasan checks are fully functional.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Thu, 11 Apr 2019 17:58:32 +0000 (19:58 +0200)]
Revert "ALSA: seq: Protect in-kernel ioctl calls with mutex"
[ Upstream commit
f0654ba94e33699b295ce4f3dc73094db6209035 ]
This reverts commit
feb689025fbb6f0aa6297d3ddf97de945ea4ad32.
The fix attempt was incorrect, leading to the mutex deadlock through
the close of OSS sequencer client. The proper fix needs more
consideration, so let's revert it now.
Fixes:
feb689025fbb ("ALSA: seq: Protect in-kernel ioctl calls with mutex")
Reported-by: syzbot+47ded6c0f23016cde310@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Tue, 9 Apr 2019 16:04:17 +0000 (18:04 +0200)]
ALSA: seq: Fix race of get-subscription call vs port-delete ioctls
[ Upstream commit
2eabc5ec8ab4d4748a82050dfcb994119b983750 ]
The snd_seq_ioctl_get_subscription() retrieves the port subscriber
information as a pointer, while the object isn't protected, hence it
may be deleted before the actual reference. This race was spotted by
syzkaller and may lead to a UAF.
The fix is simply copying the data in the lookup function that
performs in the rwsem to protect against the deletion.
Reported-by: syzbot+9437020c82413d00222d@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Tue, 9 Apr 2019 15:35:22 +0000 (17:35 +0200)]
ALSA: seq: Protect in-kernel ioctl calls with mutex
[ Upstream commit
feb689025fbb6f0aa6297d3ddf97de945ea4ad32 ]
ALSA OSS sequencer calls the ioctl function indirectly via
snd_seq_kernel_client_ctl(). While we already applied the protection
against races between the normal ioctls and writes via the client's
ioctl_mutex, this code path was left untouched. And this seems to be
the cause of still remaining some rare UAF as spontaneously triggered
by syzkaller.
For the sake of robustness, wrap the ioctl_mutex also for the call via
snd_seq_kernel_client_ctl(), too.
Reported-by: syzbot+e4c8abb920efa77bace9@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Thu, 7 Mar 2019 18:54:25 +0000 (19:54 +0100)]
x86/uaccess, kcov: Disable stack protector
[ Upstream commit
40ea97290b08be2e038b31cbb33097d1145e8169 ]
New tooling noticed this mishap:
kernel/kcov.o: warning: objtool: write_comp_data()+0x138: call to __stack_chk_fail() with UACCESS enabled
kernel/kcov.o: warning: objtool: __sanitizer_cov_trace_pc()+0xd9: call to __stack_chk_fail() with UACCESS enabled
All the other instrumentation (KASAN,UBSAN) also have stack protector
disabled.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ville Syrjälä [Tue, 9 Apr 2019 14:40:49 +0000 (17:40 +0300)]
drm/i915/sdvo: Implement proper HDMI audio support for SDVO
commit
d74408f528261f900dddb9778f61b5c5a7a6249c upstream.
Our SDVO audio support is pretty bogus. We can't push audio over the
SDVO bus, so trying to enable audio in the SDVO control register doesn't
do anything. In fact it looks like the SDVO encoder will always mix in
the audio coming over HDA, and there's no (at least documented) way to
disable that from our side. So HDMI audio does work currently on gen4
but only by luck really. On gen3 it got broken by the referenced commit.
And what has always been missing on every platform is the ELD.
To pass the ELD to the audio driver we need to write it to magic buffer
in the SDVO encoder hardware which then gets pulled out via HDA in the
other end. Ie. pretty much the same thing we had for native HDMI before
we started to just pass the ELD between the drivers. This sort of
explains why we even have that silly hardware buffer with native HDMI.
$ cat /proc/asound/card0/eld#1.0
-monitor_present 0
-eld_valid 0
+monitor_present 1
+eld_valid 1
+monitor_name LG TV
+connection_type HDMI
+...
This also fixes our state readout since we can now query the SDVO
encoder about the state of the "ELD valid" and "presence detect"
bits. As mentioned those don't actually control whether audio
gets sent over the HDMI cable, but it's the best we can do. And with
the state checker appeased we can re-enable HDMI audio for gen3.
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: zardam@gmail.com
Tested-by: zardam@gmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108976
Fixes:
de44e256b92c ("drm/i915/sdvo: Shut up state checker with hdmi cards on gen3")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit
dc49a56bd43bb04982e64b44436831da801d0237)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
S.j. Wang [Wed, 15 May 2019 06:42:18 +0000 (06:42 +0000)]
ASoC: fsl_asrc: Fix the issue about unsupported rate
commit
b06c58c2a1eed571ea2a6640fdb85b7b00196b1e upstream.
When the output sample rate is [8kHz, 30kHz], the limitation
of the supported ratio range is [1/24, 8]. In the driver
we use (8kHz, 30kHz) instead of [8kHz, 30kHz].
So this patch is to fix this issue and the potential rounding
issue with divider.
Fixes:
fff6e03c7b65 ("ASoC: fsl_asrc: add support for 8-30kHz
output sample rate")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
S.j. Wang [Thu, 16 May 2019 06:04:29 +0000 (06:04 +0000)]
ASoC: cs42xx8: Add regcache mask dirty
commit
ad6eecbfc01c987e0253371f274c3872042e4350 upstream.
Add regcache_mark_dirty before regcache_sync for power
of codec may be lost at suspend, then all the register
need to be reconfigured.
Fixes:
0c516b4ff85c ("ASoC: cs42xx8: Add codec driver
support for CS42448/CS42888")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejun Heo [Wed, 29 May 2019 20:46:25 +0000 (13:46 -0700)]
cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css()
commit
18fa84a2db0e15b02baa5d94bdb5bd509175d2f6 upstream.
A PF_EXITING task can stay associated with an offline css. If such
task calls task_get_css(), it can get stuck indefinitely. This can be
triggered by BSD process accounting which writes to a file with
PF_EXITING set when racing against memcg disable as in the backtrace
at the end.
After this change, task_get_css() may return a css which was already
offline when the function was called. None of the existing users are
affected by this change.
INFO: rcu_sched self-detected stall on CPU
INFO: rcu_sched detected stalls on CPUs/tasks:
...
NMI backtrace for cpu 0
...
Call Trace:
<IRQ>
dump_stack+0x46/0x68
nmi_cpu_backtrace.cold.2+0x13/0x57
nmi_trigger_cpumask_backtrace+0xba/0xca
rcu_dump_cpu_stacks+0x9e/0xce
rcu_check_callbacks.cold.74+0x2af/0x433
update_process_times+0x28/0x60
tick_sched_timer+0x34/0x70
__hrtimer_run_queues+0xee/0x250
hrtimer_interrupt+0xf4/0x210
smp_apic_timer_interrupt+0x56/0x110
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:balance_dirty_pages_ratelimited+0x28f/0x3d0
...
btrfs_file_write_iter+0x31b/0x563
__vfs_write+0xfa/0x140
__kernel_write+0x4f/0x100
do_acct_process+0x495/0x580
acct_process+0xb9/0xdb
do_exit+0x748/0xa00
do_group_exit+0x3a/0xa0
get_signal+0x254/0x560
do_signal+0x23/0x5c0
exit_to_usermode_loop+0x5d/0xa0
prepare_exit_to_usermode+0x53/0x80
retint_user+0x8/0x8
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v4.2+
Fixes:
ec438699a9ae ("cgroup, block: implement task_get_css() and use it in bio_associate_current()")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coly Li [Sun, 9 Jun 2019 22:13:35 +0000 (06:13 +0800)]
bcache: only set BCACHE_DEV_WB_RUNNING when cached device attached
commit
1f0ffa67349c56ea54c03ccfd1e073c990e7411e upstream.
When people set a writeback percent via sysfs file,
/sys/block/bcache<N>/bcache/writeback_percent
current code directly sets BCACHE_DEV_WB_RUNNING to dc->disk.flags
and schedules kworker dc->writeback_rate_update.
If there is no cache set attached to, the writeback kernel thread is
not running indeed, running dc->writeback_rate_update does not make
sense and may cause NULL pointer deference when reference cache set
pointer inside update_writeback_rate().
This patch checks whether the cache set point (dc->disk.c) is NULL in
sysfs interface handler, and only set BCACHE_DEV_WB_RUNNING and
schedule dc->writeback_rate_update when dc->disk.c is not NULL (it
means the cache device is attached to a cache set).
This problem might be introduced from initial bcache commit, but
commit
3fd47bfe55b0 ("bcache: stop dc->writeback_rate_update properly")
changes part of the original code piece, so I add 'Fixes:
3fd47bfe55b0'
to indicate from which commit this patch can be applied.
Fixes:
3fd47bfe55b0 ("bcache: stop dc->writeback_rate_update properly")
Reported-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coly Li [Sun, 9 Jun 2019 22:13:34 +0000 (06:13 +0800)]
bcache: fix stack corruption by PRECEDING_KEY()
commit
31b90956b124240aa8c63250243ae1a53585c5e2 upstream.
Recently people report bcache code compiled with gcc9 is broken, one of
the buggy behavior I observe is that two adjacent 4KB I/Os should merge
into one but they don't. Finally it turns out to be a stack corruption
caused by macro PRECEDING_KEY().
See how PRECEDING_KEY() is defined in bset.h,
437 #define PRECEDING_KEY(_k) \
438 ({ \
439 struct bkey *_ret = NULL; \
440 \
441 if (KEY_INODE(_k) || KEY_OFFSET(_k)) { \
442 _ret = &KEY(KEY_INODE(_k), KEY_OFFSET(_k), 0); \
443 \
444 if (!_ret->low) \
445 _ret->high--; \
446 _ret->low--; \
447 } \
448 \
449 _ret; \
450 })
At line 442, _ret points to address of a on-stack variable combined by
KEY(), the life range of this on-stack variable is in line 442-446,
once _ret is returned to bch_btree_insert_key(), the returned address
points to an invalid stack address and this address is overwritten in
the following called bch_btree_iter_init(). Then argument 'search' of
bch_btree_iter_init() points to some address inside stackframe of
bch_btree_iter_init(), exact address depends on how the compiler
allocates stack space. Now the stack is corrupted.
Fixes:
0eacac22034c ("bcache: PRECEDING_KEY()")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Rolf Fokkens <rolf@rolffokkens.nl>
Reviewed-by: Pierre JUHEN <pierre.juhen@orange.fr>
Tested-by: Shenghui Wang <shhuiw@foxmail.com>
Tested-by: Pierre JUHEN <pierre.juhen@orange.fr>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Nix <nix@esperi.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Tue, 11 Jun 2019 16:48:18 +0000 (17:48 +0100)]
i2c: acorn: fix i2c warning
commit
ca21f851cc9643af049226d57fabc3c883ea648e upstream.
The Acorn i2c driver (for RiscPC) triggers the "i2c adapter has no name"
warning in the I2C core driver, resulting in the RTC being inaccessible.
Fix this.
Fixes:
2236baa75f70 ("i2c: Sanity checks on adapter registration")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Murphy [Mon, 3 Jun 2019 12:15:37 +0000 (14:15 +0200)]
iommu/arm-smmu: Avoid constant zero in TLBI writes
commit
4e4abae311e4b44aaf61f18a826fd7136037f199 upstream.
Apparently, some Qualcomm arm64 platforms which appear to expose their
SMMU global register space are still, in fact, using a hypervisor to
mediate it by trapping and emulating register accesses. Sadly, some
deployed versions of said trapping code have bugs wherein they go
horribly wrong for stores using r31 (i.e. XZR/WZR) as the source
register.
While this can be mitigated for GCC today by tweaking the constraints
for the implementation of writel_relaxed(), to avoid any potential
arms race with future compilers more aggressively optimising register
allocation, the simple way is to just remove all the problematic
constant zeros. For the write-only TLB operations, the actual value is
irrelevant anyway and any old nearby variable will provide a suitable
GPR to encode. The one point at which we really do need a zero to clear
a context bank happens before any of the TLB maintenance where crashes
have been reported, so is apparently not a problem... :/
Reported-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Wed, 29 May 2019 11:31:57 +0000 (13:31 +0200)]
ptrace: restore smp_rmb() in __ptrace_may_access()
commit
f6581f5b55141a95657ef5742cf6a6bfa20a109f upstream.
Restore the read memory barrier in __ptrace_may_access() that was deleted
a couple years ago. Also add comments on this barrier and the one it pairs
with to explain why they're there (as far as I understand).
Fixes:
bfedb589252c ("mm: Add a user_ns owner to mm_struct and fix ptrace permission checks")
Cc: stable@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Tue, 28 May 2019 23:46:37 +0000 (18:46 -0500)]
signal/ptrace: Don't leak unitialized kernel memory with PTRACE_PEEK_SIGINFO
[ Upstream commit
f6e2aa91a46d2bc79fce9b93a988dbe7655c90c0 ]
Recently syzbot in conjunction with KMSAN reported that
ptrace_peek_siginfo can copy an uninitialized siginfo to userspace.
Inspecting ptrace_peek_siginfo confirms this.
The problem is that off when initialized from args.off can be
initialized to a negaive value. At which point the "if (off >= 0)"
test to see if off became negative fails because off started off
negative.
Prevent the core problem by adding a variable found that is only true
if a siginfo is found and copied to a temporary in preparation for
being copied to userspace.
Prevent args.off from being truncated when being assigned to off by
testing that off is <= the maximum possible value of off. Convert off
to an unsigned long so that we should not have to truncate args.off,
we have well defined overflow behavior so if we add another check we
won't risk fighting undefined compiler behavior, and so that we have a
type whose maximum value is easy to test for.
Cc: Andrei Vagin <avagin@gmail.com>
Cc: stable@vger.kernel.org
Reported-by: syzbot+0d602a1b0d8c95bdf299@syzkaller.appspotmail.com
Fixes:
84c751bd4aeb ("ptrace: add ability to retrieve signals without removing from a queue (v4)")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Minchan Kim [Thu, 13 Jun 2019 22:56:15 +0000 (15:56 -0700)]
mm/vmscan.c: fix trying to reclaim unevictable LRU page
commit
a58f2cef26e1ca44182c8b22f4f4395e702a5795 upstream.
There was the below bug report from Wu Fangsuo.
On the CMA allocation path, isolate_migratepages_range() could isolate
unevictable LRU pages and reclaim_clean_page_from_list() can try to
reclaim them if they are clean file-backed pages.
page:
ffffffbf02f33b40 count:86 mapcount:84 mapping:
ffffffc08fa7a810 index:0x24
flags: 0x19040c(referenced|uptodate|arch_1|mappedtodisk|unevictable|mlocked)
raw:
000000000019040c ffffffc08fa7a810 0000000000000024 0000005600000053
raw:
ffffffc009b05b20 ffffffc009b05b20 0000000000000000 ffffffc09bf3ee80
page dumped because: VM_BUG_ON_PAGE(PageLRU(page) || PageUnevictable(page))
page->mem_cgroup:
ffffffc09bf3ee80
------------[ cut here ]------------
kernel BUG at /home/build/farmland/adroid9.0/kernel/linux/mm/vmscan.c:1350!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 7125 Comm: syz-executor Tainted: G S 4.14.81 #3
Hardware name: ASR AQUILAC EVB (DT)
task:
ffffffc00a54cd00 task.stack:
ffffffc009b00000
PC is at shrink_page_list+0x1998/0x3240
LR is at shrink_page_list+0x1998/0x3240
pc : [<
ffffff90083a2158>] lr : [<
ffffff90083a2158>] pstate:
60400045
sp :
ffffffc009b05940
..
shrink_page_list+0x1998/0x3240
reclaim_clean_pages_from_list+0x3c0/0x4f0
alloc_contig_range+0x3bc/0x650
cma_alloc+0x214/0x668
ion_cma_allocate+0x98/0x1d8
ion_alloc+0x200/0x7e0
ion_ioctl+0x18c/0x378
do_vfs_ioctl+0x17c/0x1780
SyS_ioctl+0xac/0xc0
Wu found it's due to commit
ad6b67041a45 ("mm: remove SWAP_MLOCK in
ttu"). Before that, unevictable pages go to cull_mlocked so that we
can't reach the VM_BUG_ON_PAGE line.
To fix the issue, this patch filters out unevictable LRU pages from the
reclaim_clean_pages_from_list in CMA.
Link: http://lkml.kernel.org/r/20190524071114.74202-1-minchan@kernel.org
Fixes:
ad6b67041a45 ("mm: remove SWAP_MLOCK in ttu")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Wu Fangsuo <fangsuowu@asrmicro.com>
Debugged-by: Wu Fangsuo <fangsuowu@asrmicro.com>
Tested-by: Wu Fangsuo <fangsuowu@asrmicro.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Pankaj Suryawanshi <pankaj.suryawanshi@einfochips.com>
Cc: <stable@vger.kernel.org> [4.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wengang Wang [Thu, 13 Jun 2019 22:56:01 +0000 (15:56 -0700)]
fs/ocfs2: fix race in ocfs2_dentry_attach_lock()
commit
be99ca2716972a712cde46092c54dee5e6192bf8 upstream.
ocfs2_dentry_attach_lock() can be executed in parallel threads against the
same dentry. Make that race safe. The race is like this:
thread A thread B
(A1) enter ocfs2_dentry_attach_lock,
seeing dentry->d_fsdata is NULL,
and no alias found by
ocfs2_find_local_alias, so kmalloc
a new ocfs2_dentry_lock structure
to local variable "dl", dl1
.....
(B1) enter ocfs2_dentry_attach_lock,
seeing dentry->d_fsdata is NULL,
and no alias found by
ocfs2_find_local_alias so kmalloc
a new ocfs2_dentry_lock structure
to local variable "dl", dl2.
......
(A2) set dentry->d_fsdata with dl1,
call ocfs2_dentry_lock() and increase
dl1->dl_lockres.l_ro_holders to 1 on
success.
......
(B2) set dentry->d_fsdata with dl2
call ocfs2_dentry_lock() and increase
dl2->dl_lockres.l_ro_holders to 1 on
success.
......
(A3) call ocfs2_dentry_unlock()
and decrease
dl2->dl_lockres.l_ro_holders to 0
on success.
....
(B3) call ocfs2_dentry_unlock(),
decreasing
dl2->dl_lockres.l_ro_holders, but
see it's zero now, panic
Link: http://lkml.kernel.org/r/20190529174636.22364-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reported-by: Daniel Sobe <daniel.sobe@nxp.com>
Tested-by: Daniel Sobe <daniel.sobe@nxp.com>
Reviewed-by: Changwei Ge <gechangwei@live.cn>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shakeel Butt [Thu, 13 Jun 2019 22:55:49 +0000 (15:55 -0700)]
mm/list_lru.c: fix memory leak in __memcg_init_list_lru_node
commit
3510955b327176fd4cbab5baa75b449f077722a2 upstream.
Syzbot reported following memory leak:
ffffffffda RBX:
0000000000000003 RCX:
0000000000441f79
BUG: memory leak
unreferenced object 0xffff888114f26040 (size 32):
comm "syz-executor626", pid 7056, jiffies
4294948701 (age 39.410s)
hex dump (first 32 bytes):
40 60 f2 14 81 88 ff ff 40 60 f2 14 81 88 ff ff @`......@`......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
slab_post_alloc_hook mm/slab.h:439 [inline]
slab_alloc mm/slab.c:3326 [inline]
kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
kmalloc include/linux/slab.h:547 [inline]
__memcg_init_list_lru_node+0x58/0xf0 mm/list_lru.c:352
memcg_init_list_lru_node mm/list_lru.c:375 [inline]
memcg_init_list_lru mm/list_lru.c:459 [inline]
__list_lru_init+0x193/0x2a0 mm/list_lru.c:626
alloc_super+0x2e0/0x310 fs/super.c:269
sget_userns+0x94/0x2a0 fs/super.c:609
sget+0x8d/0xb0 fs/super.c:660
mount_nodev+0x31/0xb0 fs/super.c:1387
fuse_mount+0x2d/0x40 fs/fuse/inode.c:1236
legacy_get_tree+0x27/0x80 fs/fs_context.c:661
vfs_get_tree+0x2e/0x120 fs/super.c:1476
do_new_mount fs/namespace.c:2790 [inline]
do_mount+0x932/0xc50 fs/namespace.c:3110
ksys_mount+0xab/0x120 fs/namespace.c:3319
__do_sys_mount fs/namespace.c:3333 [inline]
__se_sys_mount fs/namespace.c:3330 [inline]
__x64_sys_mount+0x26/0x30 fs/namespace.c:3330
do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This is a simple off by one bug on the error path.
Link: http://lkml.kernel.org/r/20190528043202.99980-1-shakeelb@google.com
Fixes:
60d3fd32a7a9 ("list_lru: introduce per-memcg lists")
Reported-by: syzbot+f90a420dfe2b1b03cb2c@syzkaller.appspotmail.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: <stable@vger.kernel.org> [4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 11 Jun 2019 14:32:59 +0000 (16:32 +0200)]
libata: Extend quirks for the ST1000LM024 drives with NOLPM quirk
commit
31f6264e225fb92cf6f4b63031424f20797c297d upstream.
We've received a bugreport that using LPM with ST1000LM024 drives leads
to system lockups. So it seems that these models are buggy in more then
1 way. Add NOLPM quirk to the existing quirks entry for BROKEN_FPDMA_AA.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Sakamoto [Sat, 1 Jun 2019 03:08:01 +0000 (12:08 +0900)]
ALSA: firewire-motu: fix destruction of data for isochronous resources
commit
0e3fb6995bfabb23c172e8b883bf5ac57102678e upstream.
The data for isochronous resources is not destroyed in expected place.
This commit fixes the bug.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes:
9b2bb4f2f4a2 ("ALSA: firewire-motu: add stream management functionality")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kailang Yang [Fri, 31 May 2019 09:16:53 +0000 (17:16 +0800)]
ALSA: hda/realtek - Update headset mode for ALC256
commit
717f43d81afc1250300479075952a0e36d74ded3 upstream.
ALC255 and ALC256 were some difference for hidden register.
This update was suitable for ALC256.
Fixes:
e69e7e03ed22 ("ALSA: hda/realtek - ALC256 speaker noise issue")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Sakamoto [Sun, 9 Jun 2019 10:29:12 +0000 (19:29 +0900)]
ALSA: oxfw: allow PCM capture for Stanton SCS.1m
commit
d8fa87c368f5b4096c4746894fdcc195da285df1 upstream.
Stanton SCS.1m can transfer isochronous packet with Multi Bit Linear
Audio data channels, therefore it allows software to capture PCM
substream. However, ALSA oxfw driver doesn't.
This commit changes the driver to add one PCM substream for capture
direction.
Fixes:
de5126cc3c0b ("ALSA: oxfw: add stream format quirk for SCS.1 models")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hui Wang [Fri, 14 Jun 2019 08:44:12 +0000 (16:44 +0800)]
Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops"
commit
17d304604a88cf20c8dfd2c95d3decb9c4f8bca4 upstream.
This reverts commit
9cb40eb184c4220d244a532bd940c6345ad9dbd9.
This patch introduces noise and headphone playback issue after
rebooting or suspending/resuming. Let us revert it.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203831
Fixes:
9cb40eb184c4 ("ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Gerecke [Tue, 7 May 2019 18:53:22 +0000 (11:53 -0700)]
HID: wacom: Sync INTUOSP2_BT touch state after each frame if necessary
commit
69dbdfffef20c715df9f381b2cee4e9e0a4efd93 upstream.
The Bluetooth interface of the 2nd-gen Intuos Pro batches together four
independent "frames" of finger data into a single report. Each frame
is essentially equivalent to a single USB report, with the up-to-10
fingers worth of information being spread across two frames. At the
moment the driver only calls `input_sync` after processing all four
frames have been processed, which can result in the driver sending
multiple updates for a single slot within the same SYN_REPORT. This
can confuse userspace, so modify the driver to sync more often if
necessary (i.e., after reporting the state of all fingers).
Fixes:
4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Cc: <stable@vger.kernel.org> # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Gerecke [Tue, 7 May 2019 18:53:21 +0000 (11:53 -0700)]
HID: wacom: Correct button numbering 2nd-gen Intuos Pro over Bluetooth
commit
6441fc781c344df61402be1fde582c4491fa35fa upstream.
The button numbering of the 2nd-gen Intuos Pro is not consistent between
the USB and Bluetooth interfaces. Over USB, the HID_GENERIC codepath
enumerates the eight ExpressKeys first (BTN_0 - BTN_7) followed by the
center modeswitch button (BTN_8). The Bluetooth codepath, however, has
the center modeswitch button as BTN_0 and the the eight ExpressKeys as
BTN_1 - BTN_8. To ensure userspace button mappings do not change
depending on how the tablet is connected, modify the Bluetooth codepath
to report buttons in the same order as USB.
To ensure the mode switch LED continues to toggle in response to the
mode switch button, the `wacom_is_led_toggled` function also requires
a small update.
Link: https://github.com/linuxwacom/input-wacom/pull/79
Fixes:
4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Cc: <stable@vger.kernel.org> # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Skomra <aaron.skomra@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Gerecke [Tue, 7 May 2019 18:53:20 +0000 (11:53 -0700)]
HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact
commit
fe7f8d73d1af19b678171170e4e5384deb57833d upstream.
The Bluetooth reports from the 2nd-gen Intuos Pro have separate bits for
indicating if the tip or eraser is in contact with the tablet. At the
moment, only the tip contact bit controls the state of the BTN_TOUCH
event. This prevents the eraser from working as expected. This commit
changes the driver to send BTN_TOUCH whenever either the tip or eraser
contact bit is set.
Fixes:
4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Cc: <stable@vger.kernel.org> # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Skomra <aaron.skomra@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-rpi.git / log