x86/srso: Add SRSO_NO support

Upstream commit: 1b5277c0ea0b247393a9c426769fde18cff5e2f6

Add support for the CPUID flag which denotes that the CPU is not
affected by SRSO.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/srso: Add IBPB_BRTYPE support

Upstream commit: 79113e4060aba744787a81edb9014f2865193854

Add support for the synthetic CPUID flag which "if this bit is 1,
it indicates that MSR 49h (PRED_CMD) bit 0 (IBPB) flushes all branch
type predictions from the CPU branch predictor."

This flag is there so that this capability in guests can be detected
easily (otherwise one would have to track microcode revisions which is
impossible for guests).

It is also needed only for Zen3 and -4. The other two (Zen1 and -2)
always flush branch type predictions by default.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/srso: Add a Speculative RAS Overflow mitigation

Upstream commit: fb3bd914b3ec28f5fb697ac55c4846ac2d542855

Add a mitigation for the speculative return address stack overflow
vulnerability found on AMD processors.

The mitigation works by ensuring all RET instructions speculate to
a controlled location, similar to how speculation is controlled in the
retpoline sequence.  To accomplish this, the __x86_return_thunk forces
the CPU to mispredict every function return using a 'safe return'
sequence.

To ensure the safety of this mitigation, the kernel must ensure that the
safe return sequence is itself free from attacker interference.  In Zen3
and Zen4, this is accomplished by creating a BTB alias between the
untraining function srso_untrain_ret_alias() and the safe return
function srso_safe_ret_alias() which results in evicting a potentially
poisoned BTB entry and using that safe one for all function returns.

In older Zen1 and Zen2, this is accomplished using a reinterpretation
technique similar to Retbleed one: srso_untrain_ret() and
srso_safe_ret().

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu, kvm: Add support for CPUID_80000021_EAX

commit 8415a74852d7c24795007ee9862d25feb519007c upstream.

Add support for CPUID leaf 80000021, EAX. The majority of the features will be
used in the kernel and thus a separate leaf is appropriate.

Include KVM's reverse_cpuid entry because features are used by VM guests, too.

  [ bp: Massage commit message. ]

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230124163319.2277355-2-kim.phillips@amd.com
[bwh: Backported to 6.1: adjust context]
Signed-off-by: Ben Hutchings <benh@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/bugs: Increase the x86 bugs vector size to two u32s

Upstream commit: 0e52740ffd10c6c316837c6c128f460f1aaba1ea

There was never a doubt in my mind that they would not fit into a single
u32 eventually.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/x86: Fix backwards on/off logic about YMM support

commit 1b0fc0345f2852ffe54fb9ae0e12e2ee69ad6a20 upstream

These options clearly turn *off* XSAVE YMM support.  Correct the
typo.

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 553a5c03e90a ("x86/speculation: Add force option to GDS mitigation")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Initialize text poking earlier

commit 5b93a83649c7cba3a15eb7e8959b250841acb1b1 upstream.

Move poking_init() up a bunch; specifically move it right after
mm_init() which is right before ftrace_init().

This will allow simplifying ftrace text poking which currently has
a bunch of exceptions for early boot.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221025201057.881703081@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: Move mm_cachep initialization to mm_init()

commit af80602799681c78f14fbe20b6185a56020dedee upstream.

In order to allow using mm_alloc() much earlier, move initializing
mm_cachep into mm_init().

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221025201057.751153381@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Use mm_alloc() in poking_init()

commit 3f4c8211d982099be693be9aa7d6fc4607dff290 upstream.

Instead of duplicating init_mm, allocate a fresh mm. The advantage is
that mm_alloc() has much simpler dependencies. Additionally it makes
more conceptual sense, init_mm has no (and must not have) user state
to duplicate.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221025201057.816175235@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: fix poking_init() for Xen PV guests

commit 26ce6ec364f18d2915923bc05784084e54a5c4cc upstream.

Commit 3f4c8211d982 ("x86/mm: Use mm_alloc() in poking_init()") broke
the kernel for running as Xen PV guest.

It seems as if the new address space is never activated before being
used, resulting in Xen rejecting to accept the new CR3 value (the PGD
isn't pinned).

Fix that by adding the now missing call of paravirt_arch_dup_mmap() to
poking_init(). That call was previously done by dup_mm()->dup_mmap() and
it is a NOP for all cases but for Xen PV, where it is just doing the
pinning of the PGD.

Fixes: 3f4c8211d982 ("x86/mm: Use mm_alloc() in poking_init()")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230109150922.10578-1-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/xen: Fix secondary processors' FPU initialization

commit fe3e0a13e597c1c8617814bf9b42ab732db5c26e upstream.

Moving the call of fpu__init_cpu() from cpu_init() to start_secondary()
broke Xen PV guests, as those don't call start_secondary() for APs.

Call fpu__init_cpu() in Xen's cpu_bringup(), which is the Xen PV
replacement of start_secondary().

Fixes: b81fac906a8f ("x86/fpu: Move FPU initialization into arch_cpu_finalize_init()")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230703130032.22916-1-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build

commit 0a9567ac5e6a40cdd9c8cd15b19a62a15250f450 upstream.

Moving mem_encrypt_init() broke the AMD_MEM_ENCRYPT=n because the
declaration of that function was under #ifdef CONFIG_AMD_MEM_ENCRYPT and
the obvious placement for the inline stub was the #else path.

This is a leftover of commit 20f07a044a76 ("x86/sev: Move common memory
encryption code to mem_encrypt.c") which made mem_encrypt_init() depend on
X86_MEM_ENCRYPT without moving the prototype. That did not fail back then
because there was no stub inline as the core init code had a weak function.

Move both the declaration and the stub out of the CONFIG_AMD_MEM_ENCRYPT
section and guard it with CONFIG_X86_MEM_ENCRYPT.

Fixes: 439e17576eb4 ("init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Closes: https://lore.kernel.org/oe-kbuild-all/202306170247.eQtCJPE8-lkp@intel.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Add GDS_NO support to KVM

commit 81ac7e5d741742d650b4ed6186c4826c1a0631a7 upstream

Gather Data Sampling (GDS) is a transient execution attack using
gather instructions from the AVX2 and AVX512 extensions. This attack
allows malicious code to infer data that was previously stored in
vector registers. Systems that are not vulnerable to GDS will set the
GDS_NO bit of the IA32_ARCH_CAPABILITIES MSR. This is useful for VM
guests that may think they are on vulnerable systems that are, in
fact, not affected. Guests that are running on affected hosts where
the mitigation is enabled are protected as if they were running
on an unaffected system.

On all hosts that are not affected or that are mitigated, set the
GDS_NO bit.

Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Add Kconfig option for GDS

commit 53cf5797f114ba2bd86d23a862302119848eff19 upstream

Gather Data Sampling (GDS) is mitigated in microcode. However, on
systems that haven't received the updated microcode, disabling AVX
can act as a mitigation. Add a Kconfig option that uses the microcode
mitigation if available and disables AVX otherwise. Setting this
option has no effect on systems not affected by GDS. This is the
equivalent of setting gather_data_sampling=force.

Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Add force option to GDS mitigation

commit 553a5c03e90a6087e88f8ff878335ef0621536fb upstream

The Gather Data Sampling (GDS) vulnerability allows malicious software
to infer stale data previously stored in vector registers. This may
include sensitive data such as cryptographic keys. GDS is mitigated in
microcode, and systems with up-to-date microcode are protected by
default. However, any affected system that is running with older
microcode will still be vulnerable to GDS attacks.

Since the gather instructions used by the attacker are part of the
AVX2 and AVX512 extensions, disabling these extensions prevents gather
instructions from being executed, thereby mitigating the system from
GDS. Disabling AVX2 is sufficient, but we don't have the granularity
to do this. The XCR0[2] disables AVX, with no option to just disable
AVX2.

Add a kernel parameter gather_data_sampling=force that will enable the
microcode mitigation if available, otherwise it will disable AVX on
affected systems.

This option will be ignored if cmdline mitigations=off.

This is a *big* hammer.  It is known to break buggy userspace that
uses incomplete, buggy AVX enumeration.  Unfortunately, such userspace
does exist in the wild:

https://www.mail-archive.com/bug-coreutils@gnu.org/msg33046.html

[ dhansen: add some more ominous warnings about disabling AVX ]

Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Add Gather Data Sampling mitigation

commit 8974eb588283b7d44a7c91fa09fcbaf380339f3a upstream

Gather Data Sampling (GDS) is a hardware vulnerability which allows
unprivileged speculative access to data which was previously stored in
vector registers.

Intel processors that support AVX2 and AVX512 have gather instructions
that fetch non-contiguous data elements from memory. On vulnerable
hardware, when a gather instruction is transiently executed and
encounters a fault, stale data from architectural or internal vector
registers may get transiently stored to the destination vector
register allowing an attacker to infer the stale data using typical
side channel techniques like cache timing attacks.

This mitigation is different from many earlier ones for two reasons.
First, it is enabled by default and a bit must be set to *DISABLE* it.
This is the opposite of normal mitigation polarity. This means GDS can
be mitigated simply by updating microcode and leaving the new control
bit alone.

Second, GDS has a "lock" bit. This lock bit is there because the
mitigation affects the hardware security features KeyLocker and SGX.
It needs to be enabled and *STAY* enabled for these features to be
mitigated against GDS.

The mitigation is enabled in the microcode by default. Disable it by
setting gather_data_sampling=off or by disabling all mitigations with
mitigations=off. The mitigation status can be checked by reading:

    /sys/devices/system/cpu/vulnerabilities/gather_data_sampling

Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Move FPU initialization into arch_cpu_finalize_init()

commit b81fac906a8f9e682e513ddd95697ec7a20878d4 upstream

Initializing the FPU during the early boot process is a pointless
exercise. Early boot is convoluted and fragile enough.

Nothing requires that the FPU is set up early. It has to be initialized
before fork_init() because the task_struct size depends on the FPU register
buffer size.

Move the initialization to arch_cpu_finalize_init() which is the perfect
place to do so.

No functional change.

This allows to remove quite some of the custom early command line parsing,
but that's subject to the next installment.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.902376621@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Mark init functions __init

commit 1703db2b90c91b2eb2d699519fc505fe431dde0e upstream

No point in keeping them around.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.841685728@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Remove cpuinfo argument from init functions

commit 1f34bb2a24643e0087652d81078e4f616562738d upstream

Nothing in the call chain requires it

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.783704297@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/init: Initialize signal frame size late

commit 54d9a91a3d6713d1332e93be13b4eaf0fa54349d upstream

No point in doing this during really early boot. Move it to an early
initcall so that it is set up before possible user mode helpers are started
during device initialization.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.727330699@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()

commit 439e17576eb47f26b78c5bbc72e344d4206d2327 upstream

Invoke the X86ism mem_encrypt_init() from X86 arch_cpu_finalize_init() and
remove the weak fallback from the core code.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.670360645@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

init: Invoke arch_cpu_finalize_init() earlier

commit 9df9d2f0471b4c4702670380b8d8a45b40b23a7d upstream

X86 is reworking the boot process so that initializations which are not
required during early boot can be moved into the late boot process and out
of the fragile and restricted initial boot phase.

arch_cpu_finalize_init() is the obvious place to do such initializations,
but arch_cpu_finalize_init() is invoked too late in start_kernel() e.g. for
initializing the FPU completely. fork_init() requires that the FPU is
initialized as the size of task_struct on X86 depends on the size of the
required FPU register buffer.

Fortunately none of the init calls between calibrate_delay() and
arch_cpu_finalize_init() is relevant for the functionality of
arch_cpu_finalize_init().

Invoke it right after calibrate_delay() where everything which is relevant
for arch_cpu_finalize_init() has been set up already.

No functional change intended.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://lore.kernel.org/r/20230613224545.612182854@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

init: Remove check_bugs() leftovers

commit 61235b24b9cb37c13fcad5b9596d59a1afdcec30 upstream

Everything is converted over to arch_cpu_finalize_init(). Remove the
check_bugs() leftovers including the empty stubs in asm-generic, alpha,
parisc, powerpc and xtensa.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20230613224545.553215951@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um/cpu: Switch to arch_cpu_finalize_init()

commit 9349b5cd0908f8afe95529fc7a8cbb1417df9b0c upstream

check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20230613224545.493148694@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc/cpu: Switch to arch_cpu_finalize_init()

commit 44ade508e3bfac45ae97864587de29eb1a881ec0 upstream

check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20230613224545.431995857@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh/cpu: Switch to arch_cpu_finalize_init()

commit 01eb454e9bfe593f320ecbc9aaec60bf87cd453d upstream

check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.371697797@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips/cpu: Switch to arch_cpu_finalize_init()

commit 7f066a22fe353a827a402ee2835e81f045b1574d upstream

check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.312438573@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

m68k/cpu: Switch to arch_cpu_finalize_init()

commit 9ceecc2589b9d7cef6b321339ed8de484eac4b20 upstream

check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230613224545.254342916@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loongarch/cpu: Switch to arch_cpu_finalize_init()

commit 9841c423164787feb8f1442f922b7d80a70c82f1 upstream

check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.195288218@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ia64/cpu: Switch to arch_cpu_finalize_init()

commit 6c38e3005621800263f117fb00d6787a76e16de7 upstream

check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.137045745@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: cpu: Switch to arch_cpu_finalize_init()

commit ee31bb0524a2e7c99b03f50249a411cc1eaa411f upstream

check_bugs() is about to be phased out. Switch over to the new
arch_cpu_finalize_init() implementation.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224545.078124882@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu: Switch to arch_cpu_finalize_init()

commit 7c7077a72674402654f3291354720cd73cdf649e upstream

check_bugs() is a dumping ground for finalizing the CPU bringup. Only parts of
it has to do with actual CPU bugs.

Split it apart into arch_cpu_finalize_init() and cpu_select_mitigations().

Fixup the bogus 32bit comments while at it.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230613224545.019583869@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

init: Provide arch_cpu_finalize_init()

commit 7725acaa4f0c04fbefb0e0d342635b967bb7d414 upstream

check_bugs() has become a dumping ground for all sorts of activities to
finalize the CPU initialization before running the rest of the init code.

Most are empty, a few do actual bug checks, some do alternative patching
and some cobble a CPU advertisement string together....

Aside of that the current implementation requires duplicated function
declaration and mostly empty header files for them.

Provide a new function arch_cpu_finalize_init(). Provide a generic
declaration if CONFIG_ARCH_HAS_CPU_FINALIZE_INIT is selected and a stub
inline otherwise.

This requires a temporary #ifdef in start_kernel() which will be removed
along with check_bugs() once the architectures are converted over.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224544.957805717@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.1.43

Link: https://lore.kernel.org/r/20230801091922.799813980@linuxfoundation.org
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230802065510.869511253@linuxfoundation.org
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf: fix an error pointer vs NULL bug

commit 00ae1491f970acc454be0df63f50942d94825860 upstream.

Smatch detected potential error pointer dereference.

    drivers/gpu/drm/drm_syncobj.c:888 drm_syncobj_transfer_to_timeline()
    error: 'fence' dereferencing possible ERR_PTR()

The error pointer comes from dma_fence_allocate_private_stub().  One
caller expected error pointers and one expected NULL pointers.  Change
it to return NULL and update the caller which expected error pointers,
drm_syncobj_assign_null_handle(), to check for NULL instead.

Fixes: f781f661e8c9 ("dma-buf: keep the signaling time of merged fences v3")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b09f1996-3838-4fa2-9193-832b68262e43@moroto.mountain
Cc: Jindong Yue <jindong.yue@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf: keep the signaling time of merged fences v3

commit f781f661e8c99b0cb34129f2e374234d61864e77 upstream.

Some Android CTS is testing if the signaling time keeps consistent
during merges.

v2: use the current time if the fence is still in the signaling path and
the timestamp not yet available.
v3: improve comment, fix one more case to use the correct timestamp

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630120041.109216-1-christian.koenig@amd.com
Cc: Jindong Yue <jindong.yue@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

test_firmware: return ENOMEM instead of ENOSPC on failed memory allocation

commit 7dae593cd226a0bca61201cf85ceb9335cf63682 upstream.

In a couple of situations like

name = kstrndup(buf, count, GFP_KERNEL);
if (!name)
return -ENOSPC;

the error is not actually "No space left on device", but "Out of memory".

It is semantically correct to return -ENOMEM in all failed kstrndup()
and kzalloc() cases in this driver, as it is not a problem with disk
space, but with kernel memory allocator failing allocation.

The semantically correct should be:

        name = kstrndup(buf, count, GFP_KERNEL);
        if (!name)
                return -ENOMEM;

Cc: Dan Carpenter <error27@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Luis R. Rodriguez" <mcgrof@ruslug.rutgers.edu>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Brian Norris <briannorris@chromium.org>
Fixes: c92316bf8e948 ("test_firmware: add batched firmware tests")
Fixes: 0a8adf584759c ("test: add firmware_class loader test")
Fixes: 548193cba2a7d ("test_firmware: add support for firmware_request_platform")
Fixes: eb910947c82f9 ("test: firmware_class: add asynchronous request trigger")
Fixes: 061132d2b9c95 ("test_firmware: add test custom fallback trigger")
Fixes: 7feebfa487b92 ("test_firmware: add support for request_firmware_into_buf")
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20230606070808.9300-1-mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: mptcp: sockopt: use 'iptables-legacy' if available

commit a5a5990c099dd354e05e89ee77cd2dbf6655d4a1 upstream.

IPTables commands using 'iptables-nft' fail on old kernels, at least
on v5.15 because it doesn't see the default IPTables chains:

  $ iptables -L
  iptables/1.8.2 Failed to initialize nft: Protocol not supported

As a first step before switching to NFTables, we can use iptables-legacy
if available.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: dc65fe82fb07 ("selftests: mptcp: add packet mark test case")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: ensure subflow is unhashed before cleaning the backlog

commit 3fffa15bfef48b0ad6424779c03e68ae8ace5acb upstream.

While tacking care of the mptcp-level listener I unintentionally
moved the subflow level unhash after the subflow listener backlog
cleanup.

That could cause some nasty race and makes the code harder to read.

Address the issue restoring the proper order of operations.

Fixes: 57fc0f1ceaa4 ("mptcp: ensure listener is unhashed before updating the sk status")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: intel_pstate: Drop ACPI _PSS states table patching

commit e8a0e30b742f76ebd0f3b196973df4bf65d8fbbb upstream.

After making acpi_processor_get_platform_limit() use the "no limit"
value for its frequency QoS request when _PPC returns 0, it is not
necessary to replace the frequency corresponding to the first _PSS
return package entry with the maximum turbo frequency of the given
CPU in intel_pstate_init_acpi_perf_limits() any more, so drop the
code doing that along with the comment explaining it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Hagar Hemdan <hagarhem@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: processor: perflib: Avoid updating frequency QoS unnecessarily

commit 99387b016022c29234c4ebf9abd34358c6e56532 upstream.

Modify acpi_processor_get_platform_limit() to avoid updating its
frequency QoS request when the _PPC return value has not changed
by comparing that value to the previous _PPC return value stored in
the performance_platform_limit field of the struct acpi_processor
corresponding to the given CPU.

While at it, do the _PPC return value check against the state count
earlier, to avoid setting performance_platform_limit to an invalid
value, and make acpi_processor_ppc_init() use FREQ_QOS_MAX_DEFAULT_VALUE
as the "no limit" frequency QoS for consistency.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Hagar Hemdan <hagarhem@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: processor: perflib: Use the "no limit" frequency QoS

commit c02d5feb6e2f60affc6ba8606d8d614c071e2ba6 upstream.

When _PPC returns 0, it means that the CPU frequency is not limited by
the platform firmware, so make acpi_processor_get_platform_limit()
update the frequency QoS request used by it to "no limit" in that case.

This addresses a problem with limiting CPU frequency artificially on
some systems after CPU offline/online to the frequency that corresponds
to the first entry in the _PSS return package.

Reported-by: Pratyush Yadav <ptyadav@amazon.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Hagar Hemdan <hagarhem@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Write to correct dirty_rect

commit 751281c55579f0cb0e56c9797d4663f689909681 upstream.

When FB_DAMAGE_CLIPS are provided in a non-MPO scenario, the loop does
not use the counter i. This causes the fill_dc_dity_rect() to always
fill dirty_rects[0], causing graphical artifacts when a damage clip
aware DRM client sends more than 1 damage clip.

Instead, use the flip_addrs->dirty_rect_count which is incremented by
fill_dc_dirty_rect() on a successful fill.

Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2453
Signed-off-by: Benjamin Cheng <ben@bcheng.me>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: perform a bounds check before filling dirty rectangles

commit af22d6a869cc26b519bfdcd54293c53f2e491870 upstream.

Currently, it is possible for us to access memory that we shouldn't.
Since, we acquire (possibly dangling) pointers to dirty rectangles
before doing a bounds check to make sure we can actually accommodate the
number of dirty rectangles userspace has requested to fill. This issue
is especially evident if a compositor requests both MPO and damage clips
at the same time, in which case I have observed a soft-hang. So, to
avoid this issue, perform the bounds check before filling a single dirty
rectangle and WARN() about it, if it is ever attempted in
fill_dc_dirty_rect().

Cc: stable@vger.kernel.org # 6.1+
Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix trace_event_raw_event_synth() if else statement

commit 9971c3f944489ff7aacb9d25e0cde841a5f6018a upstream.

The test to check if the field is a stack is to be done if it is not a
string. But the code had:

    } if (event->fields[i]->is_stack) {

and not

   } else if (event->fields[i]->is_stack) {

which would cause it to always be tested. Worse yet, this also included an
"else" statement that was only to be called if the field was not a string
and a stack, but this code allows it to be called if it was a string (and
not a stack).

Also fixed some whitespace issues.

Link: https://lore.kernel.org/all/202301302110.mEtNwkBD-lkp@intel.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230131095237.63e3ca8d@gandalf.local.home
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 00cf3d672a9d ("tracing: Allow synthetic events to pass around stacktraces")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: set per pipe dppclk to 0 when dpp is off

commit 6609141c49df1b86fbad26a8643d4b4044f28b11 upstream.

The 'commit 52e4fdf09ebc ("drm/amd/display: use low clocks for no plane
configs")' introduced a change that set low clock values for DCN31 and
DCN32. As a result of these changes, DC started to spam the log with the
following warning:

------------[ cut here ]------------
WARNING: CPU: 8 PID: 1486 at
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_dccg.c:58
dccg2_update_dpp_dto+0x3f/0xf0 [amdgpu]
[..]
CPU: 8 PID: 1486 Comm: kms_atomic Tainted: G W 5.18.0+ #1
RIP: 0010:dccg2_update_dpp_dto+0x3f/0xf0 [amdgpu]
RSP: 0018:ffffbbd8025334d0 EFLAGS: 00010206
RAX: 00000000000001ee RBX: ffffa02c87dd3de0 RCX: 00000000000a7f80
RDX: 000000000007dec3 RSI: 0000000000000000 RDI: ffffa02c87dd3de0
RBP: ffffbbd8025334e8 R08: 0000000000000001 R09: 0000000000000005
R10: 00000000000331a0 R11: ffffffffc0b03d80 R12: ffffa02ca576d000
R13: ffffa02cd02c0000 R14: 00000000001453bc R15: ffffa02cdc280000
[..]
dcn20_update_clocks_update_dpp_dto+0x4e/0xa0 [amdgpu]
dcn32_update_clocks+0x5d9/0x650 [amdgpu]
dcn20_prepare_bandwidth+0x49/0x100 [amdgpu]
dcn30_prepare_bandwidth+0x63/0x80 [amdgpu]
dc_commit_state_no_check+0x39d/0x13e0 [amdgpu]
dc_commit_streams+0x1f9/0x3b0 [amdgpu]
dc_commit_state+0x37/0x120 [amdgpu]
amdgpu_dm_atomic_commit_tail+0x5e5/0x2520 [amdgpu]
? _raw_spin_unlock_irqrestore+0x1f/0x40
? down_trylock+0x2c/0x40
? vprintk_emit+0x186/0x2c0
? vprintk_default+0x1d/0x20
? vprintk+0x4e/0x60

We can easily trigger this issue by using a 4k@120 or a 2k@165 and
running some of the kms_atomic tests. This warning is triggered because
the per-pipe clock update is not happening; this commit fixes this issue
by ensuring that DPPCLK is updated when calculating the watermark and
dlg is invoked.

Fixes: 2641c7b78081 ("drm/amd/display: use low clocks for no plane configs")
Reported-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rbd: retrieve and check lock owner twice before blocklisting

commit 588159009d5b7a09c3e5904cffddbe4a4e170301 upstream.

An attempt to acquire exclusive lock can race with the current lock
owner closing the image:

1. lock is held by client123, rbd_lock() returns -EBUSY
2. get_lock_owner_info() returns client123 instance details
3. client123 closes the image, lock is released
4. find_watcher() returns 0 as there is no matching watcher anymore
5. client123 instance gets erroneously blocklisted

Particularly impacted is mirror snapshot scheduler in snapshot-based
mirroring since it happens to open and close images a lot (images are
opened only for as long as it takes to take the next mirror snapshot,
the same client instance is used for all images).

To reduce the potential for erroneous blocklisting, retrieve the lock
owner again after find_watcher() returns 0.  If it's still there, make
sure it matches the previously detected lock owner.

Cc: stable@vger.kernel.org # f38cb9d9c204: rbd: make get_lock_owner_info() return a single locker or NULL
Cc: stable@vger.kernel.org # 8ff2c64c9765: rbd: harden get_lock_owner_info() a bit
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rbd: harden get_lock_owner_info() a bit

commit 8ff2c64c9765446c3cef804fb99da04916603e27 upstream.

- we want the exclusive lock type, so test for it directly
- use sscanf() to actually parse the lock cookie and avoid admitting
  invalid handles
- bail if locker has a blank address

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rbd: make get_lock_owner_info() return a single locker or NULL

commit f38cb9d9c2045dad16eead4a2e1aedfddd94603b upstream.

Make the "num_lockers can be only 0 or 1" assumption explicit and
simplify the API by getting rid of output parameters in preparation
for calling get_lock_owner_info() twice before blocklisting.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache policy smq: ensure IO doesn't prevent cleaner policy progress

commit 1e4ab7b4c881cf26c1c72b3f56519e03475486fb upstream.

When using the cleaner policy to decommission the cache, there is
never any writeback started from the cache as it is constantly delayed
due to normal I/O keeping the device busy. Meaning @idle=false was
always being passed to clean_target_met()

Fix this by adding a specific 'cleaner' flag that is set when the
cleaner policy is configured. This flag serves to always allow the
cleaner's writeback work to be queued until the cache is
decommissioned (even if the cache isn't idle).

Reported-by: David Jeffery <djeffery@redhat.com>
Fixes: b29d4986d0da ("dm cache: significant rework to leverage dm-bio-prison-v2")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/dpt: Use shmem for dpt objects

commit 3844ed5e78823eebb5f0f1edefc403310693d402 upstream.

Dpt objects that are created from internal get evicted when there is
memory pressure and do not get restored when pinned during scanout. The
pinned page table entries look corrupted and programming the display
engine with the incorrect pte's result in DE throwing pipe faults.

Create DPT objects from shmem and mark the object as dirty when pinning so
that the object is restored when shrinker evicts an unpinned buffer object.

v2: Unconditionally mark the dpt objects dirty during pinning(Chris).

Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt")
Cc: <stable@vger.kernel.org> # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718225118.2562132-1-radhakrishna.sripada@intel.com
(cherry picked from commit e91a777a6e602ba0e3366e053e4e094a334a1244)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: never send metrics if disable_send_metrics is set

commit 50164507f6b7b7ed85d8c3ac0266849fbd908db7 upstream.

Even the 'disable_send_metrics' is true so when the session is
being opened it will always trigger to send the metric for the
first time.

Cc: stable@vger.kernel.org
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM: sleep: wakeirq: fix wake irq arming

commit 8527beb12087238d4387607597b4020bc393c4b4 upstream.

The decision whether to enable a wake irq during suspend can not be done
based on the runtime PM state directly as a driver may use wake irqs
without implementing runtime PM. Such drivers specifically leave the
state set to the default 'suspended' and the wake irq is thus never
enabled at suspend.

Add a new wake irq flag to track whether a dedicated wake irq has been
enabled at runtime suspend and therefore must not be enabled at system
suspend.

Note that pm_runtime_enabled() can not be used as runtime PM is always
disabled during late suspend.

Fixes: 69728051f5bf ("PM / wakeirq: Fix unbalanced IRQ enable for wakeirq")
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/sme: Set new vector length before reallocating

commit 05d881b85b48c7ac6a7c92ce00aa916c4a84d052 upstream.

As part of fixing the allocation of the buffer for SVE state when changing
SME vector length we introduced an immediate reallocation of the SVE state,
this is also done when changing the SVE vector length for consistency.
Unfortunately this reallocation is done prior to writing the new vector
length to the task struct, meaning the allocation is done with the old
vector length and can lead to memory corruption due to an undersized buffer
being used.

Move the update of the vector length before the allocation to ensure that
the new vector length is taken into account.

For some reason this isn't triggering any problems when running tests on
the arm64 fixes branch (even after repeated tries) but is triggering
issues very often after merge into mainline.

Fixes: d4d5be94a878 ("arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230726-arm64-fix-sme-fix-v1-1-7752ec58af27@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8904: Fill the cache for WM8904_ADC_TEST_0 register

commit f061e2be8689057cb4ec0dbffa9f03e1a23cdcb2 upstream.

The WM8904_ADC_TEST_0 register is modified as part of updating the OSR
controls but does not have a cache default, leading to errors when we try
to modify these controls in cache only mode with no prior read:

wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16

Add a read of the register to probe() to fill the cache and avoid both the
error messages and the misconfiguration of the chip which will result.

Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: print copy pair message only for the correct error

commit 856d8e3c633b183df23549ce760ae84478a7098d upstream.

The DASD driver has certain types of requests that might be rejected by
the storage server or z/VM because they are not supported. Since the
missing support of the command is not a real issue there is no user
visible kernel error message for this.

For copy pair setups  there is a specific error that IO is not allowed on
secondary devices. This error case is explicitly handled and an error
message is printed.

The code checking for the error did use a bitwise 'and' that is used to
check for specific bits. But in this case the whole sense byte has to
match.

This leads to the problem that the copy pair related error message is
erroneously printed for other error cases that are usually not reported.
This might heavily confuse users and lead to follow on actions that might
disrupt application processing.

Fix by checking the sense byte for the exact value and not single bits.

Cc: stable@vger.kernel.org # 6.1+
Fixes: 1fca631a1185 ("s390/dasd: suppress generic error messages for PPRC secondary devices")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: fix hanging device after quiesce/resume

commit 05f1d8ed03f547054efbc4d29bb7991c958ede95 upstream.

Quiesce and resume are functions that tell the DASD driver to stop/resume
issuing I/Os to a specific DASD.

On resume dasd_schedule_block_bh() is called to kick handling of IO
requests again. This does unfortunately not cover internal requests which
are used for path verification for example.

This could lead to a hanging device when a path event or anything else
that triggers internal requests occurs on a quiesced device.

Fix by also calling dasd_schedule_device_bh() which triggers handling of
internal requests on resume.

Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")

Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LoongArch: BPF: Enable bpf_probe_read{, str}() on LoongArch

commit de0e30bee86d0f99c696a1fea34474e556a946ec upstream.

Currently nettrace does not work on LoongArch due to missing
bpf_probe_read{,str}() support, with the error message:

     ERROR: failed to load kprobe-based eBPF
     ERROR: failed to load kprobe-based bpf

According to commit 0ebeea8ca8a4d1d ("bpf: Restrict bpf_probe_read{,
str}() only to archs where they work"), we only need to select
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to add said support,
because LoongArch does have non-overlapping address ranges for kernel
and userspace.

Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LoongArch: BPF: Fix check condition to call lu32id in move_imm()

commit 4eece7e6de94d833c8aeed2f438faf487cbf94ff upstream.

As the code comment says, the initial aim is to reduce one instruction
in some corner cases, if bit[51:31] is all 0 or all 1, no need to call
lu32id. That is to say, it should call lu32id only if bit[51:31] is not
all 0 and not all 1. The current code always call lu32id, the result is
right but the logic is unexpected and wrong, fix it.

Cc: stable@vger.kernel.org # 6.1
Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Reported-by: Colin King (gmail) <colin.i.king@gmail.com>
Closes: https://lore.kernel.org/all/bcf97046-e336-712a-ac68-7fd194f2953e@gmail.com/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "um: Use swap() to make code cleaner"

commit dddfa05eb58076ad60f9a66e7155a5b3502b2dd5 upstream.

This reverts commit 9b0da3f22307af693be80f5d3a89dc4c7f360a85.

The sigio.c is clearly user space code which is handled by
arch/um/scripts/Makefile.rules (see USER_OBJS rule).

The above mentioned commit simply broke this agreement,
we may not use Linux kernel internal headers in them without
thorough thinking.

Hence, revert the wrong commit.

Link: https://lkml.kernel.org/r/20230724143131.30090-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307212304.cH79zJp1-lkp@intel.com/
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Herve Codina <herve.codina@bootlin.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Richard Weinberger <richard@nod.at>
Cc: Yang Guang <yang.guang5@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soundwire: fix enumeration completion

commit c40d6b3249b11d60e09d81530588f56233d9aa44 upstream.

The soundwire subsystem uses two completion structures that allow
drivers to wait for soundwire device to become enumerated on the bus and
initialised by their drivers, respectively.

The code implementing the signalling is currently broken as it does not
signal all current and future waiters and also uses the wrong
reinitialisation function, which can potentially lead to memory
corruption if there are still waiters on the queue.

Not signalling future waiters specifically breaks sound card probe
deferrals as codec drivers can not tell that the soundwire device is
already attached when being reprobed. Some codec runtime PM
implementations suffer from similar problems as waiting for enumeration
during resume can also timeout despite the device already having been
enumerated.

Fixes: fb9469e54fa7 ("soundwire: bus: fix race condition with enumeration_complete signaling")
Fixes: a90def068127 ("soundwire: bus: fix race condition with initialization_complete signaling")
Cc: stable@vger.kernel.org # 5.7
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230705123018.30903-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: mptcp: join: only check for ip6tables if needed

commit 016e7ba47f33064fbef8c4307a2485d2669dfd03 upstream.

If 'iptables-legacy' is available, 'ip6tables-legacy' command will be
used instead of 'ip6tables'. So no need to look if 'ip6tables' is
available in this case.

Cc: stable@vger.kernel.org
Fixes: 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if available")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230725-send-net-20230725-v1-1-6f60fe7137a9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: qca8k: fix mdb add/del case with 0 VID

commit dfd739f182b00b02bd7470ed94d112684cc04fa2 upstream.

The qca8k switch doesn't support using 0 as VID and require a default
VID to be always set. MDB add/del function doesn't currently handle
this and are currently setting the default VID.

Fix this by correctly handling this corner case and internally use the
default VID for VID 0 case.

Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: qca8k: fix broken search_and_del

commit ae70dcb9d9ecaf7d9836d3e1b5bef654d7ef5680 upstream.

On deleting an MDB entry for a port, fdb_search_and_del is used.
An FDB entry can't be modified so it needs to be deleted and readded
again with the new portmap (and the port deleted as requested)

We use the SEARCH operator to search the entry to edit by vid and mac
address and then we check the aging if we actually found an entry.

Currently the code suffer from a bug where the searched fdb entry is
never read again with the found values (if found) resulting in the code
always returning -EINVAL as aging was always 0.

Fix this by correctly read the fdb entry after it was searched.

Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: qca8k: fix search_and_insert wrong handling of new rule

commit 80248d4160894d7e40b04111bdbaa4ff93fc4bd7 upstream.

On inserting a mdb entry, fdb_search_and_insert is used to add a port to
the qca8k target entry in the FDB db.

A FDB entry can't be modified so it needs to be removed and insert again
with the new values.

To detect if an entry already exist, the SEARCH operation is used and we
check the aging of the entry. If the entry is not 0, the entry exist and
we proceed to delete it.

Current code have 2 main problem:
- The condition to check if the FDB entry exist is wrong and should be
  the opposite.
- When a FDB entry doesn't exist, aging was never actually set to the
  STATIC value resulting in allocating an invalid entry.

Fix both problem by adding aging support to the function, calling the
function with STATIC as aging by default and finally by correct the
condition to check if the entry actually exist.

Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio-net: fix race between set queues and probe

commit 25266128fe16d5632d43ada34c847d7b8daba539 upstream.

A race were found where set_channels could be called after registering
but before virtnet_set_queues() in virtnet_probe(). Fixing this by
moving the virtnet_set_queues() before netdevice registering. While at
it, use _virtnet_set_queues() to avoid holding rtnl as the device is
not even registered at that time.

Cc: stable@vger.kernel.org
Fixes: a220871be66f ("virtio-net: correctly enable multiqueue")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230725072049.617289-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: speed up grant-table reclaim

commit c04e9894846c663f3278a414f34416e6e45bbe68 upstream.

When a grant entry is still in use by the remote domain, Linux must put
it on a deferred list.  Normally, this list is very short, because
the PV network and block protocols expect the backend to unmap the grant
first.  However, Qubes OS's GUI protocol is subject to the constraints
of the X Window System, and as such winds up with the frontend unmapping
the window first.  As a result, the list can grow very large, resulting
in a massive memory leak and eventual VM freeze.

To partially solve this problem, make the number of entries that the VM
will attempt to free at each iteration tunable.  The default is still
10, but it can be overridden via a module parameter.

This is Cc: stable because (when combined with appropriate userspace
changes) it fixes a severe performance and stability problem for Qubes
OS users.

Cc: stable@vger.kernel.org
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230726165354.1252-1-demi@invisiblethingslab.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc/vmcore: fix signedness bug in read_from_oldmem()

commit 641db40f3afe7998011bfabc726dba3e698f8196 upstream.

The bug is the error handling:

if (tmp < nr_bytes) {

"tmp" can hold negative error codes but because "nr_bytes" is type size_t
the negative error codes are treated as very high positive values
(success).  Fix this by changing "nr_bytes" to type ssize_t.  The
"nr_bytes" variable is used to store values between 1 and PAGE_SIZE and
they can fit in ssize_t without any issue.

Link: https://lkml.kernel.org/r/b55f7eed-1c65-4adc-95d1-6c7c65a54a6e@moroto.mountain
Fixes: 5d8de293c224 ("vmcore: convert copy_oldmem_page() to take an iov_iter")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locking/rtmutex: Fix task->pi_waiters integrity

[ Upstream commit f7853c34241807bb97673a5e97719123be39a09e ]

Henry reported that rt_mutex_adjust_prio_check() has an ordering
problem and puts the lie to the comment in [7]. Sharing the sort key
between lock->waiters and owner->pi_waiters *does* create problems,
since unlike what the comment claims, holding [L] is insufficient.

Notably, consider:

A
      /   \
     M1   M2
     |     |
     B     C

That is, task A owns both M1 and M2, B and C block on them. In this
case a concurrent chain walk (B & C) will modify their resp. sort keys
in [7] while holding M1->wait_lock and M2->wait_lock. So holding [L]
is meaningless, they're different Ls.

This then gives rise to a race condition between [7] and [11], where
the requeue of pi_waiters will observe an inconsistent tree order.

B C

  (holds M1->wait_lock, (holds M2->wait_lock,
   holds B->pi_lock)  holds A->pi_lock)

  [7]
  waiter_update_prio();
  ...
  [8]
  raw_spin_unlock(B->pi_lock);
  ...
  [10]
  raw_spin_lock(A->pi_lock);

[11]
rt_mutex_enqueue_pi();
// observes inconsistent A->pi_waiters
// tree order

Fixing this means either extending the range of the owner lock from
[10-13] to [6-13], with the immediate problem that this means [6-8]
hold both blocked and owner locks, or duplicating the sort key.

Since the locking in chain walk is horrible enough without having to
consider pi_lock nesting rules, duplicate the sort key instead.

By giving each tree their own sort key, the above race becomes
harmless, if C sees B at the old location, then B will correct things
(if they need correcting) when it walks up the chain and reaches A.

Fixes: fb00aca47440 ("rtmutex: Turn the plist into an rb-tree")
Reported-by: Henry Wu <triangletrap12@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Henry Wu <triangletrap12@gmail.com>
Link: https://lkml.kernel.org/r/20230707161052.GF2883469%40hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/gic-v4.1: Properly lock VPEs when doing a directLPI invalidation

[ Upstream commit 926846a703cbf5d0635cc06e67d34b228746554b ]

We normally rely on the irq_to_cpuid_[un]lock() primitives to make
sure nothing will change col->idx while performing a LPI invalidation.

However, these primitives do not cover VPE doorbells, and we have
some open-coded locking for that. Unfortunately, this locking is
pretty bogus.

Instead, extend the above primitives to cover VPE doorbells and
convert the whole thing to it.

Fixes: f3a059219bc7 ("irqchip/gic-v4.1: Ensure mutual exclusion between vPE affinity change and RD access")
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: wanghaibin.wang@huawei.com
Tested-by: Kunkun Jiang <jiangkunkun@huawei.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20230617073242.3199746-1-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

irq-bcm6345-l1: Do not assume a fixed block to cpu mapping

[ Upstream commit 55ad24857341c36616ecc1d9580af5626c226cf1 ]

The irq to block mapping is fixed, and interrupts from the first block
will always be routed to the first parent IRQ. But the parent interrupts
themselves can be routed to any available CPU.

This is used by the bootloader to map the first parent interrupt to the
boot CPU, regardless wether the boot CPU is the first one or the second
one.

When booting from the second CPU, the assumption that the first block's
IRQ is mapped to the first CPU breaks, and the system hangs because
interrupts do not get routed correctly.

Fix this by passing the appropriate bcm6434_l1_cpu to the interrupt
handler instead of the chip itself, so the handler always has the right
block.

Fixes: c7c42ec2baa1 ("irqchips/bmips: Add bcm6345-l1 interrupt controller")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230629072620.62527-1-jonas.gorski@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm_tis: Explicitly check for error code

commit 513253f8c293c0c8bd46d09d337fc892bf8f9f48 upstream.

recv_data either returns the number of received bytes, or a negative value
representing an error code. Adding the return value directly to the total
number of received bytes therefore looks a little weird, since it might add
a negative error code to a sum of bytes.

The following check for size < expected usually makes the function return
ETIME in that case, so it does not cause too many problems in practice. But
to make the code look cleaner and because the caller might still be
interested in the original error code, explicitly check for the presence of
an error code and pass that through.

Cc: stable@vger.kernel.org
Fixes: cb5354253af2 ("[PATCH] tpm: spacing cleanups 2")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI/IORT: Remove erroneous id_count check in iort_node_get_rmr_info()

commit 003e6b56d780095a9adc23efc9cb4b4b4717169b upstream.

According to the ARM IORT specifications DEN 0049 issue E,
the "Number of IDs" field in the ID mapping format reports
the number of IDs in the mapping range minus one.

In iort_node_get_rmr_info(), we erroneously skip ID mappings
whose "Number of IDs" equal to 0, resulting in valid mapping
nodes with a single ID to map being skipped, which is wrong.

Fix iort_node_get_rmr_info() by removing the bogus id_count
check.

Fixes: 491cf4a6735a ("ACPI/IORT: Add support to retrieve IORT RMR reserved regions")
Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 6.0.x
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1689593625-45213-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: Remove incorrect check in nfsd4_validate_stateid

commit f75546f58a70da5cfdcec5a45ffc377885ccbee8 upstream.

If the client is calling TEST_STATEID, then it is because some event
occurred that requires it to check all the stateids for validity and
call FREE_STATEID on the ones that have been revoked. In this case,
either the stateid exists in the list of stateids associated with that
nfs4_client, in which case it should be tested, or it does not. There
are no additional conditions to be considered.

Reported-by: "Frank Ch. Eigler" <fche@redhat.com>
Fixes: 7df302f75ee2 ("NFSD: TEST_STATEID should not return NFS4ERR_STALE_STATEID")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

file: always lock position for FMODE_ATOMIC_POS

commit 20ea1e7d13c1b544fe67c4a8dc3943bb1ab33e6f upstream.

The pidfd_getfd() system call allows a caller with ptrace_may_access()
abilities on another process to steal a file descriptor from this
process. This system call is used by debuggers, container runtimes,
system call supervisors, networking proxies etc. So while it is a
special interest system call it is used in common tools.

That ability ends up breaking our long-time optimization in fdget_pos(),
which "knew" that if we had exclusive access to the file descriptor
nobody else could access it, and we didn't need the lock for the file
position.

That check for file_count(file) was always fairly subtle - it depended
on __fdget() not incrementing the file count for single-threaded
processes and thus included that as part of the rule - but it did mean
that we didn't need to take the lock in all those traditional unix
process contexts.

So it's sad to see this go, and I'd love to have some way to re-instate
the optimization. At the same time, the lock obviously isn't ever
contended in the case we optimized, so all we were optimizing away is
the atomics and the cacheline dirtying. Let's see if anybody even
notices that the optimization is gone.

Link: https://lore.kernel.org/linux-fsdevel/20230724-vfs-fdget_pos-v1-1-a4abfd7103f3@kernel.org/
Fixes: 8649c322f75c ("pid: Implement pidfd_getfd syscall")
Cc: stable@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/MCE/AMD: Decrement threshold_bank refcount when removing threshold blocks

commit 3ba2e83334bed2b1980b59734e6e84dfaf96026c upstream.

AMD systems from Family 10h to 16h share MCA bank 4 across multiple CPUs.
Therefore, the threshold_bank structure for bank 4, and its threshold_block
structures, will be initialized once at boot time. And the kobject for the
shared bank will be added to each of the CPUs that share it. Furthermore,
the threshold_blocks for the shared bank will be added again to the bank's
kobject. These additions will increase the refcount for the bank's kobject.

For example, a shared bank with two blocks and shared across two CPUs will
be set up like this:

  CPU0 init
    bank create and add; bank refcount = 1; threshold_create_bank()
      block 0 init and add; bank refcount = 2; allocate_threshold_blocks()
      block 1 init and add; bank refcount = 3; allocate_threshold_blocks()
  CPU1 init
    bank add; bank refcount = 3; threshold_create_bank()
      block 0 add; bank refcount = 4; __threshold_add_blocks()
      block 1 add; bank refcount = 5; __threshold_add_blocks()

Currently in threshold_remove_bank(), if the bank is shared then
__threshold_remove_blocks() is called. Here the shared bank's kobject and
the bank's blocks' kobjects are deleted. This is done on the first call
even while the structures are still shared. Subsequent calls from other
CPUs that share the structures will attempt to delete the kobjects.

During kobject_del(), kobject->sd is removed. If the kobject is not part of
a kset with default_groups, then subsequent kobject_del() calls seem safe
even with kobject->sd == NULL.

Originally, the AMD MCA thresholding structures did not use default_groups.
And so the above behavior was not apparent.

However, a recent change implemented default_groups for the thresholding
structures. Therefore, kobject_del() will go down the sysfs_remove_groups()
code path. In this case, the first kobject_del() may succeed and remove
kobject->sd. But subsequent kobject_del() calls will give a WARNing in
kernfs_remove_by_name_ns() since kobject->sd == NULL.

Use kobject_put() on the shared bank's kobject when "removing" blocks. This
decrements the bank's refcount while keeping kobjects enabled until the
bank is no longer shared. At that point, kobject_put() will be called on
the blocks which drives their refcount to 0 and deletes them and also
decrementing the bank's refcount. And finally kobject_put() will be called
on the bank driving its refcount to 0 and deleting it.

The same example above:

  CPU1 shutdown
    bank is shared; bank refcount = 5; threshold_remove_bank()
      block 0 put parent bank; bank refcount = 4; __threshold_remove_blocks()
      block 1 put parent bank; bank refcount = 3; __threshold_remove_blocks()
  CPU0 shutdown
    bank is no longer shared; bank refcount = 3; threshold_remove_bank()
      block 0 put block; bank refcount = 2; deallocate_threshold_blocks()
      block 1 put block; bank refcount = 1; deallocate_threshold_blocks()
    put bank; bank refcount = 0; threshold_remove_bank()

Fixes: 7f99cb5e6039 ("x86/CPU/AMD: Use default_groups in kobj_type")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/alpine.LRH.2.02.2205301145540.25840@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: check for commit error at btrfs_attach_transaction_barrier()

commit b28ff3a7d7e97456fd86b68d24caa32e1cfa7064 upstream.

btrfs_attach_transaction_barrier() is used to get a handle pointing to the
current running transaction if the transaction has not started its commit
yet (its state is < TRANS_STATE_COMMIT_START). If the transaction commit
has started, then we wait for the transaction to commit and finish before
returning - however we completely ignore if the transaction was aborted
due to some error during its commit, we simply return ERR_PT(-ENOENT),
which makes the caller assume everything is fine and no errors happened.

This could make an fsync return success (0) to user space when in fact we
had a transaction abort and the target inode changes were therefore not
persisted.

Fix this by checking for the return value from btrfs_wait_for_commit(),
and if it returned an error, return it back to the caller.

Fixes: d4edf39bd5db ("Btrfs: fix uncompleted transaction")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: check if the transaction was aborted at btrfs_wait_for_commit()

commit bf7ecbe9875061bf3fce1883e3b26b77f847d1e8 upstream.

At btrfs_wait_for_commit() we wait for a transaction to finish and then
always return 0 (success) without checking if it was aborted, in which
case the transaction didn't happen due to some critical error. Fix this
by checking if the transaction was aborted.

Fixes: 462045928bda ("Btrfs: add START_SYNC, WAIT_SYNC ioctls")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: account block group tree when calculating global reserve size

commit 8dbfc14fc736eb701089aff09645c3d4ad3decb1 upstream.

When using the block group tree feature, this tree is a critical tree just
like the extent, csum and free space trees, and just like them it uses the
delayed refs block reserve.

So take into account the block group tree, and its current size, when
calculating the size for the global reserve.

CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (nct7802) Fix for temp6 (PECI1) processed even if PECI1 disabled

commit 54685abe660a59402344d5045ce08c43c6a5ac42 upstream.

Because of hex value 0x46 used instead of decimal 46, the temp6
(PECI1) temperature is always declared visible and then displayed
even if disabled in the chip

Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com>
Link: https://lore.kernel.org/r/DU0PR10MB62526435ADBC6A85243B90E08002A@DU0PR10MB6252.EURPRD10.PROD.OUTLOOK.COM
Fixes: fcdc5739dce03 ("hwmon: (nct7802) add temperature sensor type attribute")
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (k10temp) Enable AMD3255 Proc to show negative temperature

commit e146503ac68418859fb063a3a0cd9ec93bc52238 upstream.

Industrial processor i3255 supports temperatures -40 deg celcius
to 105 deg Celcius. The current implementation of k10temp_read_temp
rounds off any negative temperatures to '0'. To fix this,
the following changes have been made.

A flag 'disp_negative' is added to struct k10temp_data to support
AMD i3255 processors. Flag 'disp_negative' is set if 3255 processor
is found during k10temp_probe.  Flag 'disp_negative' is used to
determine whether to round off negative temperatures to '0' in
k10temp_read_temp.

Signed-off-by: Baskaran Kannan <Baski.Kannan@amd.com>
Link: https://lore.kernel.org/r/20230727162159.1056136-1-Baski.Kannan@amd.com
Fixes: aef17ca12719 ("hwmon: (k10temp) Only apply temperature offset if result is positive")
Cc: stable@vger.kernel.org
[groeck: Fixed multi-line comment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/relatek: Enable Mute LED on HP 250 G8

commit d510acb610e6aa07a04b688236868b2a5fd60deb upstream.

This HP Notebook used ALC236 codec with COEF 0x07 idx 1 controlling
the mute LED. Enable already existing quirk for this device.

Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230725111509.623773-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Support ASUS G713PV laptop

commit 8019a4ab3d80c7af391a646cccff953753fc025f upstream.

This laptop has CS35L41 amp connected via I2C.

With this patch speakers begin to work if the
missing _DSD properties are added to ACPI tables.

Signed-off-by: Pavel Asyutchenko <svenpavel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230726223732.20775-1-svenpavel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "xhci: add quirk for host controllers that don't update endpoint DCS"

commit 5bef4b3cb95a5b883dfec8b3ffc0d671323d55bb upstream.

This reverts commit 5255660b208aebfdb71d574f3952cf48392f4306.

This quirk breaks at least the following hardware:

0b:00.0 0c03: 1106:3483 (rev 01) (prog-if 30 [XHCI])
        Subsystem: 1106:3483
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 66
        Region 0: Memory at fb400000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] MSI: Enable+ Count=1/4 Maskable- 64bit+
                Address: 00000000fee007b8  Data: 0000
        Capabilities: [c4] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 89W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x1
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
                         EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
                         FRS- TPHComp- ExtTPHComp-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
                         AtomicOpsCtl: ReqEn-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
       Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

with the quirk enabled it fails early with

[    0.754373] pci 0000:0b:00.0: xHCI HW did not halt within 32000 usec status = 0x1000
[    0.754419] pci 0000:0b:00.0: quirk_usb_early_handoff+0x0/0x7a0 took 31459 usecs
[    2.228048] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[    2.228053] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 7
[    2.260073] xhci_hcd 0000:0b:00.0: Host halt failed, -110
[    2.260079] xhci_hcd 0000:0b:00.0: can't setup: -110
[    2.260551] xhci_hcd 0000:0b:00.0: USB bus 7 deregistered
[    2.260624] xhci_hcd 0000:0b:00.0: init 0000:0b:00.0 fail, -110
[    2.260639] xhci_hcd: probe of 0000:0b:00.0 failed with error -110

The hardware in question is an external PCIe card. It looks to me like the quirk
needs to be narrowed down. But this needs information about the hardware showing
the issue this quirk is to fix. So for now a clean revert.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 5255660b208a ("xhci: add quirk for host controllers that don't update endpoint DCS")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230713112830.21773-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: n_gsm: fix UAF in gsm_cleanup_mux

commit 9b9c8195f3f0d74a826077fc1c01b9ee74907239 upstream.

In gsm_cleanup_mux() the 'gsm->dlci' pointer was not cleaned properly,
leaving it a dangling pointer after gsm_dlci_release.
This leads to use-after-free where 'gsm->dlci[0]' are freed and accessed
by the subsequent gsm_cleanup_mux().

Such is the case in the following call trace:

 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106
 print_address_description+0x63/0x3b0 mm/kasan/report.c:248
 __kasan_report mm/kasan/report.c:434 [inline]
 kasan_report+0x16b/0x1c0 mm/kasan/report.c:451
 gsm_cleanup_mux+0x76a/0x850 drivers/tty/n_gsm.c:2397
 gsm_config drivers/tty/n_gsm.c:2653 [inline]
 gsmld_ioctl+0xaae/0x15b0 drivers/tty/n_gsm.c:2986
 tty_ioctl+0x8ff/0xc50 drivers/tty/tty_io.c:2816
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x61/0xcb
 </TASK>

Allocated by task 3501:
 kasan_save_stack mm/kasan/common.c:38 [inline]
 kasan_set_track mm/kasan/common.c:46 [inline]
 set_alloc_info mm/kasan/common.c:434 [inline]
 ____kasan_kmalloc+0xba/0xf0 mm/kasan/common.c:513
 kasan_kmalloc include/linux/kasan.h:264 [inline]
 kmem_cache_alloc_trace+0x143/0x290 mm/slub.c:3247
 kmalloc include/linux/slab.h:591 [inline]
 kzalloc include/linux/slab.h:721 [inline]
 gsm_dlci_alloc+0x53/0x3a0 drivers/tty/n_gsm.c:1932
 gsm_activate_mux+0x1c/0x330 drivers/tty/n_gsm.c:2438
 gsm_config drivers/tty/n_gsm.c:2677 [inline]
 gsmld_ioctl+0xd46/0x15b0 drivers/tty/n_gsm.c:2986
 tty_ioctl+0x8ff/0xc50 drivers/tty/tty_io.c:2816
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x61/0xcb

Freed by task 3501:
 kasan_save_stack mm/kasan/common.c:38 [inline]
 kasan_set_track+0x4b/0x80 mm/kasan/common.c:46
 kasan_set_free_info+0x1f/0x40 mm/kasan/generic.c:360
 ____kasan_slab_free+0xd8/0x120 mm/kasan/common.c:366
 kasan_slab_free include/linux/kasan.h:230 [inline]
 slab_free_hook mm/slub.c:1705 [inline]
 slab_free_freelist_hook+0xdd/0x160 mm/slub.c:1731
 slab_free mm/slub.c:3499 [inline]
 kfree+0xf1/0x270 mm/slub.c:4559
 dlci_put drivers/tty/n_gsm.c:1988 [inline]
 gsm_dlci_release drivers/tty/n_gsm.c:2021 [inline]
 gsm_cleanup_mux+0x574/0x850 drivers/tty/n_gsm.c:2415
 gsm_config drivers/tty/n_gsm.c:2653 [inline]
 gsmld_ioctl+0xaae/0x15b0 drivers/tty/n_gsm.c:2986
 tty_ioctl+0x8ff/0xc50 drivers/tty/tty_io.c:2816
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x61/0xcb

Fixes: aa371e96f05d ("tty: n_gsm: fix restart handling via CLD command")
Signed-off-by: Chaoyuan Peng <hedonistsmith@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()

commit 5f1c7031e044cb2fba82836d55cc235e2ad619dc upstream.

The "exc->key_len" is a u16 that comes from the user.  If it's over
IW_ENCODING_TOKEN_MAX (64) that could lead to memory corruption.

Fixes: b121d84882b9 ("staging: ks7010: simplify calls to memcpy()")
Cc: stable <stable@kernel.org>
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/tencent_5153B668C0283CAA15AA518325346E026A09@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8712: Fix memory leak in _r8712_init_xmit_priv()

commit ac83631230f77dda94154ed0ebfd368fc81c70a3 upstream.

In the above mentioned routine, memory is allocated in several places.
If the first succeeds and a later one fails, the routine will leak memory.
This patch fixes commit 2865d42c78a9 ("staging: r8712u: Add the new driver
to the mainline kernel"). A potential memory leak in
r8712_xmit_resource_alloc() is also addressed.

Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Reported-by: syzbot+cf71097ffb6755df8251@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/x/log.txt?x=11ac3fa0a80000
Cc: stable@vger.kernel.org
Cc: Nam Cao <namcaov@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reviewed-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20230714175417.18578-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: security-bugs.rst: clarify CVE handling

commit 3c1897ae4b6bc7cc586eda2feaa2cd68325ec29c upstream.

The kernel security team does NOT assign CVEs, so document that properly
and provide the "if you want one, ask MITRE for it" response that we
give on a weekly basis in the document, so we don't have to constantly
say it to everyone who asks.

Link: https://lore.kernel.org/r/2023063022-retouch-kerosene-7e4a@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: security-bugs.rst: update preferences when dealing with the linux-distros group

commit 4fee0915e649bd0cea56dece6d96f8f4643df33c upstream.

Because the linux-distros group forces reporters to release information
about reported bugs, and they impose arbitrary deadlines in having those
bugs fixed despite not actually being kernel developers, the kernel
security team recommends not interacting with them at all as this just
causes confusion and the early-release of reported security problems.

Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/2023063020-throat-pantyhose-f110@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: xhci: tegra: Fix error check"

commit 288b4fa1798e3637a9304c6e90a93d900e02369c upstream.

This reverts commit 18fc7c435be3f17ea26a21b2e2312fcb9088e01f.

The reverted commit was based on static analysis and a misunderstanding
of how PTR_ERR() and NULLs are supposed to work.  When a function
returns both pointer errors and NULL then normally the NULL means
"continue operating without a feature because it was deliberately
turned off".  The NULL should not be treated as a failure.  If a driver
cannot work when that feature is disabled then the KConfig should
enforce that the function cannot return NULL.  We should not need to
test for it.

In this code, the patch means that certain tegra_xusb_probe() will
fail if the firmware supports power-domains but CONFIG_PM is disabled.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 18fc7c435be3 ("usb: xhci: tegra: Fix error check")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/8baace8d-fb4b-41a4-ad5f-848ae643a23b@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci-mtk: set the dma max_seg_size

commit 9fd10829a9eb482e192a845675ecc5480e0bfa10 upstream.

Allow devices to have dma operations beyond 64K, and avoid warnings such
as:

DMA-API: xhci-mtk 11200000.usb: mapping sg segment longer than device claims to support [len=98304] [max=65536]

Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
Cc: stable <stable@kernel.org>
Tested-by: Zubin Mithra <zsm@chromium.org>
Reported-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20230628-mtk-usb-v2-1-c8c34eb9f229@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config

commit 2627335a1329a0d39d8d277994678571c4f21800 upstream.

Previously, the cdns3_gadget_check_config() function in the cdns3 driver
mistakenly calculated the ep_buf_size by considering only one
configuration's endpoint information because "claimed" will be clear after
call usb_gadget_check_config().

The fix involves checking the private flags EP_CLAIMED instead of relying
on the "claimed" flag.

Fixes: dce49449e04f ("usb: cdns3: allocate TX FIFO size according to composite EP number")
Cc: stable <stable@kernel.org>
Reported-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Tested-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Link: https://lore.kernel.org/r/20230707230015.494999-2-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: add quirk for Focusrite Scarlett

commit 9dc162e22387080e2d06de708b89920c0e158c9a upstream.

The Focusrite Scarlett audio device does not behave correctly during
resumes. Below is what happens during every resume (captured with
Beagle 5000):

<Suspend>
<Resume>
<Reset>/<Chirp J>/<Tiny J>
<Reset/Target disconnected>
<High Speed>

The Scarlett disconnects and is enumerated again.

However from time to time it drops completely off the USB bus during
resume. Below is captured occurrence of such an event:

<Suspend>
<Resume>
<Reset>/<Chirp J>/<Tiny J>
<Reset>/<Chirp K>/<Tiny K>
<High Speed>
<Corrupted packet>
<Reset/Target disconnected>

To fix the condition a user has to unplug and plug the device again.

With USB_QUIRK_RESET_RESUME applied ("usbcore.quirks=1235:8211:b")
for the Scarlett audio device the issue still reproduces.

Applying USB_QUIRK_DISCONNECT_SUSPEND ("usbcore.quirks=1235:8211:m")
fixed the issue and the Scarlett audio device didn't drop off the USB
bus for ~5000 suspend/resume cycles where originally issue reproduced in
~100 or less suspend/resume cycles.

Signed-off-by: Łukasz Bartosik <lb@semihalf.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230724112911.1802577-1-lb@semihalf.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: ohci-at91: Fix the unhandle interrupt when resume

commit c55afcbeaa7a6f4fffdbc999a9bf3f0b29a5186f upstream.

The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when
suspend which will let the ohci_irq() skip the interrupt after resume. And
nobody to handle this interrupt.

According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset
when resume from suspend(MEM) to fix by setting "hibernated" argument of
ohci_resume().

Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230626152713.18950-1-aarongt.shen@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: misc: ehset: fix wrong if condition

commit 7f2327666a9080e428166964e37548b0168cd5e9 upstream.

A negative number from ret means the host controller had failed to send
usb message and 0 means succeed. Therefore, the if logic is wrong here
and this patch will fix it.

Fixes: f2b42379c576 ("usb: misc: ehset: Rework test mode entry")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230705095231.457860-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: don't reset device side if dwc3 was configured as host-only

commit e835c0a4e23c38531dcee5ef77e8d1cf462658c7 upstream.

Commit c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on
system_suspend in host mode") replaces check for HOST only dr_mode with
current_dr_role. But during booting, the current_dr_role isn't
initialized, thus the device side reset is always issued even if dwc3
was configured as host-only. What's more, on some platforms with host
only dwc3, aways issuing device side reset by accessing device register
block can cause kernel panic.

Fixes: c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230627162018.739-1-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy

commit b32b8f2b9542d8039f5468303a6ca78c1b5611a5 upstream.

Hardware based on the Bay Trail / BYT SoCs require an external ULPI phy for
USB device-mode. The phy chip usually has its 'reset' and 'chip select'
lines connected to GPIOs described by ACPI fwnodes in the DSDT table.

Because of hardware with missing ACPI resources for the 'reset' and 'chip
select' GPIOs commit 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table
on platforms without ACPI GPIO resources") introduced a fallback
gpiod_lookup_table with hard-coded mappings for Bay Trail devices.

However there are existing Bay Trail based devices, like the National
Instruments cRIO-903x series, where the phy chip has its 'reset' and
'chip-select' lines always asserted in hardware via resistor pull-ups. On
this hardware the phy chip is always enabled and the ACPI dsdt table is
missing information not only for the 'chip-select' and 'reset' lines but
also for the BYT GPIO controller itself "INT33FC".

With the introduction of the gpiod_lookup_table initializing the USB
device-mode on these hardware now errors out. The error comes from the
gpiod_get_optional() calls in dwc3_pci_quirks() which will now return an
-ENOENT error due to the missing ACPI entry for the INT33FC gpio controller
used in the aforementioned table.

This hardware used to work before because gpiod_get_optional() will return
NULL instead of -ENOENT if no GPIO has been assigned to the requested
function. The dwc3_pci_quirks() code for setting the 'cs' and 'reset' GPIOs
was then skipped (due to the NULL return). This is the correct behavior in
cases where the phy chip is hardwired and there are no GPIOs to control.

Since the gpiod_lookup_table relies on the presence of INT33FC fwnode
in ACPI tables only add the table if we know the entry for the INT33FC
gpio controller is present. This allows Bay Trail based devices with
hardwired dwc3 ULPI phys to continue working.

Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources")
Cc: stable <stable@kernel.org>
Signed-off-by: Gratian Crisan <gratian.crisan@ni.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230726184555.218091-2-gratian.crisan@ni.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"

commit 734ae15ab95a18d3d425fc9cb38b7a627d786f08 upstream.

This reverts commit b138e23d3dff90c0494925b4c1874227b81bddf7.

AutoRetry has been found to sometimes cause controller freezes when
communicating with buggy USB devices.

This controller feature allows the controller in host mode to send
non-terminating/burst retry ACKs instead of terminating retry ACKs
to devices when a transaction error (CRC error or overflow) occurs.

Unfortunately, if the USB device continues to respond with a CRC error,
the controller will not complete endpoint-related commands while it
keeps trying to auto-retry. [3] The xHCI driver will notice this once
it tries to abort the transfer using a Stop Endpoint command and
does not receive a completion in time. [1]
This situation is reported to dmesg:

[sda] tag#29 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[sda] tag#29 CDB: opcode=0x28 28 00 00 69 42 80 00 00 48 00
xhci-hcd: xHCI host not responding to stop endpoint command
xhci-hcd: xHCI host controller not responding, assume dead
xhci-hcd: HC died; cleaning up

Some users observed this problem on an Odroid HC2 with the JMS578
USB3-to-SATA bridge. The issue can be triggered by starting
a read-heavy workload on an attached SSD. After a while, the host
controller would die and the SSD would disappear from the system. [1]

Further analysis by Synopsys determined that controller revisions
other than the one in Odroid HC2 are also affected by this.
The recommended solution was to disable AutoRetry altogether.
This change does not have a noticeable performance impact. [2]

Revert the enablement commit. This will keep the AutoRetry bit in
the default state configured during SoC design [2].

Fixes: b138e23d3dff ("usb: dwc3: core: Enable AutoRetry feature in the controller")
Link: https://lore.kernel.org/r/a21f34c04632d250cd0a78c7c6f4a1c9c7a43142.camel@gmail.com/
Link: https://lore.kernel.org/r/20230711214834.kyr6ulync32d4ktk@synopsys.com/
Link: https://lore.kernel.org/r/20230712225518.2smu7wse6djc7l5o@synopsys.com/
Cc: stable@vger.kernel.org
Cc: Mauro Ribeiro <mauro.ribeiro@hardkernel.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Jakub Vanek <linuxtardis@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230714122419.27741-1-linuxtardis@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: Use sysfs_emit_at when concatenating the string

commit 609fded3f91972ada551c141c5d04a71704f8967 upstream.

The buffer address used in sysfs_emit should be aligned to PAGE_SIZE.
Use sysfs_emit_at instead to offset the buffer.

Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230623151036.3955013-4-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: Iterate pds array when showing the pd list

commit 4b642dc9829507e4afabc03d32a18abbdb192c5e upstream.

The pointers of each usb_power_delivery handles are stored in "pds"
array returned from the pd_get ops but not in the adjacent memory
calculated from "pd". Get the handles from "pds" array directly instead
of deriving them from "pd".

Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230623151036.3955013-3-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>