Shunzhou Jiang [Fri, 7 Dec 2018 08:45:05 +0000 (16:45 +0800)]
mbox: g12a: add m4 mbox driver [1/3]
PD#SWPL-12873
Problem:
add m4 mailbox driver
Solution:
add m4 mailbox driver
Verify:
test pass on sm1 skt
Change-Id: Ied77949482179014d9e695ffc606f2ac939c82ca
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
jintao xu [Wed, 23 Oct 2019 09:33:03 +0000 (17:33 +0800)]
videosync: add pattern support [1/1]
PD#SWPL-15586
Problem:
When hdmi is 59.94 and 30fps and 60fps video pts is not linearly increasing
video display in vd2 video will shake.
Solution:
Videosync add pattern support.
Verify:
U212
Change-Id: I47416681dffb6e5eddef39e9c1dfcd29cfc12b92
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
yao liu [Fri, 11 Oct 2019 07:33:43 +0000 (15:33 +0800)]
dv: fix gxm dv bug [3/7]
PD#SWPL-13526
Problem:
1.watchdog reboot:
hdr_func->set_hdr_matrix is called
when disable dv, which leads to
access 38a0 illegally
2.no dolby_ctrl_backup and err
viu_misc_ctrl_backup lead to
green screen after disable dv
3.Switch resolution, display highlights
and some pixels are overexposed
4.First frame shift when playing video.
5.OSD jitter when play video
Solution:
1.Dont call hdr_vd1_off and hdr_osd_off for s912
2.dolby_ctrl_backup for s912 and update afbc bits
for viu_misc_ctrl
3.Dont set core reg if regs no changed
4.It is hardware bug, need set run_mode_delay=3,
that means the first three frames should be blank.
5.put osd_path_enable after enable_rgb_to_yuv_matrix_for_dvll
Verify:
Q201
Change-Id: I50440c5b3c6554c28f587c0542bea3773a2c9b9c
Signed-off-by: yao liu <yao.liu@amlogic.com>
bing.jiang [Fri, 18 Oct 2019 08:56:42 +0000 (16:56 +0800)]
dts: Add new dts files for T962E2 SBR [1/1]
PD#SWPL-15141
Problem:
adapt Soundbar solution to T962E2 SBR platform
Solution:
new dts file tm2_t962e2_ab311_sbr.dts changed from tm2_t962e2_ab311.dts
tm2_t962e2_ab311.dts file version
'commit
952ac4c1d709 ("hdmirx: pinmux later so as to
prevent abnormal hpd pulse [1/1]")'
add amp tas5782m
add amlogic-remote-4
Verify:
T962E2
Change-Id: I5b4ad1bc526167970de2a85aadc4089ef5eeb233
Signed-off-by: bing.jiang <bing.jiang@amlogic.com>
Tao Zeng [Wed, 16 Oct 2019 08:44:11 +0000 (16:44 +0800)]
mm: change lmk/cma using policy [1/1]
PD#TV-10462
Problem:
Memory will allocation fail if play secure vedio source. Usually
seen by zram/wifi driver
Solution:
1, wake up kswapd earlier if water mark without free cma is not ok;
2, using zone-filecache to increace active of lmk. Which can be more
accurate than using global page status;
3, remove some restrict of using cma when allocate movable page by
zram or migrate from cma pool;
4, try allocate hard for atomic request in soft IRQ
Verify:
T950L
Change-Id: Ibf03f3c11a32175e9983ee8a61a14ae4b2436f1e
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
yicheng shen [Thu, 10 Oct 2019 12:06:09 +0000 (20:06 +0800)]
hdmirx: add phy eq debug function [1/1]
PD#SWPL-12881
Problem:
Need to add eq debug function
Solution:
Add phy eq debug function,use auto-eq as default.
Verify:
TL1
Change-Id: I723d74d1bad226267b60ffb66d3670d01e6a4e1b
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
jintao xu [Thu, 24 Oct 2019 11:00:48 +0000 (19:00 +0800)]
videosync: fix can not enter standby [1/1]
PD#SWPL-15663
Problem:
wake_up always active.
Solution:
No call wake_up when no videosync active.
Verify:
U212
Change-Id: I83b76bf878331db249a2d10bdb65b2c086e28a93
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
zhiwei.yuan [Wed, 23 Oct 2019 11:46:33 +0000 (19:46 +0800)]
tvafe: garbage was seen when switch PAL to NTSC by sinco DVD [1/1]
PD#SWPL-15686
Problem:
report unstable state is too late,so that black screen is deferred.
Solution:
reduce shift condition cnt
Verify:
verified by t962x2_x301
Change-Id: Iafc38998b4d451ec3f4ddfd14c72ed54a68efbe5
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Cheng Wang [Mon, 16 Sep 2019 12:52:53 +0000 (20:52 +0800)]
amvecm: Coverity defect cleanup [1/1]
PD#SWPL-13978
Problem:
Defective code in trunk
Solution:
fix defective code
Verify:
on x301
Change-Id: I94d25695c248d9281b59f30f1c6c42e51c9af1dc
Signed-off-by: Cheng Wang <cheng.wang@amlogic.com>
yao liu [Thu, 24 Oct 2019 12:09:31 +0000 (20:09 +0800)]
dv: graphic blend test failed on HDR TV [1/1]
PD#SWPL-15631
Problem:
There is an error in
c62207ef53987660d6f6b70a79907072516e60c8
Solution:
correct the err
Verify:
SM1
Change-Id: If645ee88533dab7e28ff95d578be019a2cb894a6
Signed-off-by: yao liu <yao.liu@amlogic.com>
Wenfeng Guo [Mon, 21 Oct 2019 11:48:26 +0000 (19:48 +0800)]
amvecm: add global motion information patch [2/2]
PD#SWPL-7814
Problem:
VPP need global motion information
Solution:
1.di add global motion information
2.amvecm set dejaggy according GMV(from baozheng)
Verify:
tl1
Change-Id: I0bc9190101995c99d5e881cefe482b513f82d253
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
Wenfeng Guo [Mon, 21 Oct 2019 09:21:33 +0000 (17:21 +0800)]
deinterlace: add patch for global motion information [1/2]
PD#SWPL-7814
Problem:
VPP need di given global motion information
Solution:
add global motion information
Verify:
tl1
Change-Id: I6e522902a1d27b71db8c283b28ede6f684912fe0
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
yao liu [Tue, 22 Oct 2019 11:07:25 +0000 (19:07 +0800)]
dv: graphic blend test failed on HDR TV [1/1]
PD#SWPL-15631
Problem:
1.HDR Luminance 375 is too large
2.osd osd_h_filter_mode is not update
Solution:
1.set gmax to 300 for HDR output
2.update osd_h_filter_mode
Verify:
SM1
Change-Id: Ic6f1b02703341d01235a2081bd9ac7ee46b989e7
Signed-off-by: yao liu <yao.liu@amlogic.com>
Gongwei Chen [Mon, 21 Oct 2019 08:43:48 +0000 (16:43 +0800)]
audio: no_mclk for amp [1/1]
PD#SWPL-15422
Problem:
Play video without HDMI connection, no sound output
Solution:
no_mclk for amp
Verify:
Verify by Android P w400
Change-Id: Ic95a1e28f8ccbf6e3ba4a21f7d7b329f5854ea49
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
shaochan.liu [Wed, 23 Oct 2019 13:01:26 +0000 (21:01 +0800)]
lcd: add tcon_status debug interface [1/1]
PD#TV-11404
Problem:
need tcon_status debug interface
Solution:
add tcon_status debug interface
Verify:
x301
Change-Id: If6bd857b52138faef61dc4ecef3b846af315176e
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Evoke Zhang [Tue, 8 Oct 2019 11:07:24 +0000 (19:07 +0800)]
lcd: add prbs test support [2/2]
PD#SWPL-15371
Problem:
need lcd prbs test
Solution:
add lcd prbs test function
Verify:
x301
Change-Id: Id218acb1585713e920b361d7597ab0868e706390
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
zhiwei.yuan [Tue, 22 Oct 2019 08:28:39 +0000 (16:28 +0800)]
vdin: change "IS_ERR" invoking to "IS_ERR_OR_NULL" [1/1]
PD#SWPL-15522
Problem:
kernel panic caused by NULL pointer
Solution:
check pointer before access members of structure
Verify:
verified by t962x2_x301
Change-Id: Ia20192bb88d90b06d43c04e6e4e6aa37b2862aa2
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Liang Ji [Tue, 22 Oct 2019 05:05:34 +0000 (22:05 -0700)]
Revert "audio: auge: improve compatibility for eARC RX/TX connection [1/1]"
This reverts commit
3aae3d78a5479ff3afcab94482b0ec64d237943f.
this cl block the newton, with it newton can't boot up noraml
Change-Id: I29adeb17f3cbacfd85cb4471a80bce247d7ab07f
Signed-off-by: liang.ji <liang.ji@amlogic.com>
(cherry picked from commit
56db1c7c121e1fd420b1a9d8fb24231db76d3199)
Zongdong Jiao [Mon, 21 Oct 2019 13:44:56 +0000 (21:44 +0800)]
hdmitx: add missing 'product_desc' in SPD infoframe [1/1]
PD#SWPL-14801
Problem:
Sharp/LCD-42GX50A TV will be black when it receives vendor_name
but without product_desc in SPD infoframe
Solution:
Add missing 'product_desc' in SPD infoframe
Verify:
G12A/U212
Change-Id: I630fa416580855883a80be2747d39887ef67ef5c
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Pengcheng Chen [Tue, 22 Oct 2019 01:00:15 +0000 (09:00 +0800)]
osd: set correct dummy data with window_axis control [1/1]
PD#SWPL-15591
Problem:
a thin line appears at the bottom under linux
Solution:
set correct dummy data with window_axis control
Verify:
p212
Change-Id: Ifb422032880fb0a67f11dc8e117d10e4d96f72df
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Hong Guo [Thu, 26 Sep 2019 05:45:58 +0000 (13:45 +0800)]
reboot: add ffv_reboot mode [1/1]
PD#TV-10685
Problem:
add ffv_reboot mode
Solution:
add ffv_reboot mode
Verify:
test pass on tl1_x301
Change-Id: Ifdeb1819d89a54acbfebba0bcfe0865ea5c4ba5b
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Hong Guo [Sat, 7 Sep 2019 07:21:22 +0000 (15:21 +0800)]
reboot: add reboot reason sys infterface [1/1]
PD#TV-9896
Problem:
provide sys interface to get last reboot reason
Solution:
add reboot reason sys infterface
Verify:
test pass on tl1_x301
Change-Id: I6c4046c892eff9f92506fadb0cddee7041c8f882
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
jintao xu [Fri, 18 Oct 2019 09:58:37 +0000 (17:58 +0800)]
videosync: expire driven by vsync [1/1]
PD#SWPL-14542
Problem:
pipvideo drop frame when play 60fps
Solution:
expire driven by vsync
Verify:
U212
Change-Id: Ie54fb6c62b1e3db04157a98fd075c126b5b304d1
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
yao liu [Mon, 21 Oct 2019 08:04:56 +0000 (16:04 +0800)]
dv: osd display overexposure at 1080i [2/2]
PD#SWPL-12495
Problem:
dv vertical potch is small
Solution:
increase vpotch to 0x60
Verify:
verify on sm1
Change-Id: I4be460eb130e3c8ab85c5743ae85af72c9b7de6b
Signed-off-by: yao liu <yao.liu@amlogic.com>
Hanjie Lin [Sat, 12 Oct 2019 07:39:46 +0000 (15:39 +0800)]
debug: improve ftrace_ramoops for io trace [1/1]
PD#SWPL-6028
Problem:
optimize
Solution:
- restore memtype setting method to default.
depends on dts unbuffered attr,
default 0 means pgprot_writecombine and 1 means pgprot_noncached.
- always enable ramoop_io_en.
- fix ioremap_page_range() print mistake.
Verify:
Change-Id: Ib4383d1f5ff8310cfe4f5f732413e0d517d557b5
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Shuai Li [Sat, 19 Oct 2019 09:49:10 +0000 (17:49 +0800)]
audio: coveriy fix [1/1]
PD#SWPL-14015
Problem:
Coverity defect cleanup.
Solution:
Coverity defect cleanup.
Verify:
SM1
Change-Id: I5d564ddafb4105b80c0243efafa6fe141fd59be7
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Xihai Zhu [Tue, 15 Oct 2019 05:28:33 +0000 (01:28 -0400)]
di: fix pulldown 32 enter issue from vlsi-LiuYanling [1/1]
PD#SWPL-11692
Proble:
wrongly enter film 32 detection
Solution:
adjust the threshold
Verify:
tl1
Change-Id: Icb012a5104eebaff8634f5183a198e19167fe7b2
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Qianggui Song [Fri, 27 Sep 2019 06:20:30 +0000 (14:20 +0800)]
irqchip: fix WARNNING of lockdep [1/1]
PD#SWPL-14700
Problem:
When open lockdep there is a warnning:
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
Solution:
use hardirq-safe lock to protect critical sections
Verify:
g12a
Change-Id: Icd7550efcdefb5589d248b862b77919db8581484
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
zhiwei.yuan [Tue, 15 Oct 2019 08:49:00 +0000 (16:49 +0800)]
vdin: support afbce output for tm2 [1/1]
PD#SWPL-15188
Problem:
display is abnormal when config afbc out in dts
Solution:
correct vdin reorder mux setting
Verify:
verified by t962x3_ab301
Change-Id: Ic3ebe1bcba84f7e17c8caa3b12649a406906cabe
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
qianqian.cai [Wed, 16 Oct 2019 11:38:59 +0000 (19:38 +0800)]
deintlace: PQ the set of DI_MTN_CTRL [2/2]
PD#SWPL-14508
Problem:
HDMI480I/AV IN some issue you can see at the subtitle
Solution:
modify the DI_MTN_CTRL bit24/30 from vlsi(feijun),at the start of
field (1,2)you need set the bit24->0xf,bit30->0x1,after that
bit30->0x0
Verify:
verfy it on marconi
Change-Id: Iaf06f087811d189fe555e6802f90b7a96c33f393
Signed-off-by: qianqian.cai <qianqian.cai@amlogic.com>
qianqian.cai [Wed, 16 Oct 2019 09:24:29 +0000 (17:24 +0800)]
deintlace: PQ revert the set of di_belend_ctrl [1/2]
PD#SWPL-14508
Problem:
HDMI480I/AV IN some issue you can see at the subtitle
Solution:
revert the setting of 85992 di_blend_ctrl ,bit16
from vlsi feijun
Verify:
verfy it on the marconi
Change-Id: I78f6abd104d0953b6db7387900425175a436386b
Signed-off-by: qianqian.cai <qianqian.cai@amlogic.com>
Sunny Luo [Thu, 19 Sep 2019 11:21:34 +0000 (19:21 +0800)]
spicc: fix the condition issue of dma [1/1]
PD#SH-1213
Problem:
spicc will not run dma if bits_per_word isn't 64,
though dma mapped by the slave driver.
Solution:
change to run dma once dma mapped
Verify:
axg s400
Change-Id: I8625f973bdd5a2d69831e2c766dd43bc0417e0a5
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Xing Wang [Tue, 15 Oct 2019 03:04:47 +0000 (11:04 +0800)]
audio: auge: improve compatibility for eARC RX/TX connection [1/1]
PD#SWPL-15189
Problem:
1. earc rx fails to connect to a sony tv
2. earc tx fails to connect to AVR-X4500H
Solution:
1. reset earc_rx pll
2. reduce comma_th
Verify:
ab311
Change-Id: I369cc28931f34c78496a7fbc63559ae181944158
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Gongwei Chen [Wed, 16 Oct 2019 06:08:03 +0000 (14:08 +0800)]
tp: enble tp in w400 dts [2/2]
PD#SWPL-15292
Problem:
W400 is not touch panel
Solution:
add touch panel in w400
Verify:
verify by w400
Change-Id: Ibb4323458a2e84ba9fa84177fe6c747611277c55
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
Cheng Wang [Tue, 15 Oct 2019 07:53:46 +0000 (15:53 +0800)]
amvecm: control cm_en status [1/1]
PD#SWPL-14964
Problem:
the screen color will abnormal after open cm_en
Solution:
adjust am_en status according to chip ID
Verify:
on newton
Change-Id: I8619dc4119c4d6c7e5a2d8f2985bbd508c7f94d7
Signed-off-by: Cheng Wang <cheng.wang@amlogic.com>
Bencheng Jing [Wed, 16 Oct 2019 11:06:03 +0000 (19:06 +0800)]
vpp: dynamic adjust scaler path according to supsc0 h&v ratio [2/2]
PD#SWPL-12202
Problem:
scaler path need adjust according to supsc0 h&v ratio
Solution:
add dynamic adjust scaler path
Verify:
g12a&sm1
Change-Id: If00b4c321e24910ff7abd166d9a828dc424ab0d0
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
zhiwei.yuan [Wed, 16 Oct 2019 07:16:11 +0000 (15:16 +0800)]
vdin: The picture received by the screenshot is the previous frame [1/1]
PD#SWPL-15282
Problem:
buf is not updated because of absent receiver
Solution:
force buf recycle after screen cap stopped
Verify:
verified by t962x3_ab301
Change-Id: Idc5c354a6d744b11a892ffb3f015a5928706d438
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
jian.zhou [Tue, 15 Oct 2019 07:43:20 +0000 (03:43 -0400)]
audio: fix spdif out no sound [1/1]
PD#SWPL-13575
Problem:
The spdif out pinctrl name is not same in dts and spdif_codec code
Solution:
modify the DTS, and make spdif out pinctrl name same
Verify:
S912-Q201-DDR3
Change-Id: If93a71b4348ee98e3244ffd6a98bb405178fd24f
Signed-off-by: jian.zhou <jian.zhou@amlogic.com>
Zhe Wang [Tue, 9 Jul 2019 09:07:20 +0000 (17:07 +0800)]
audio: set audio path from frhdmirx through spdifin mode [1/2]
PD#SWPL-11054
Problem:
hdmiin source, audio input is randomly LR invert
Solution:
set audio path from frhdmirx through spdifin mode
Verify:
Verified on X301
Change-Id: Ib40d30b8b6d8bc28da69bf9b4f37ae2ef9228761
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Hong Guo [Thu, 17 Oct 2019 02:09:51 +0000 (10:09 +0800)]
cpufreq: add different freqs variable for big&little core [1/1]
PD#SWPL-15315
Problem:
add different freqs variable for big&little core
Solution:
add different freqs variable for big&little core
Verify:
test pass on g12b_w400
Change-Id: I3fbe4c6ee4f2a0868c84b362acddf16ac41a3dbd
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Evoke Zhang [Mon, 22 Jul 2019 10:27:14 +0000 (18:27 +0800)]
vdac: optimize the vdac controlling [1/1]
PD#SWPL-8385
Problem:
no cvbsout on ab311
Solution:
1.optimize the vdac controlling
2.enable cvbsout in ab311 dts
Verify:
ab311
Change-Id: Ib046e760eca1c9ad3ae30749c546aff538504b33
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Hong Guo [Tue, 15 Oct 2019 09:02:02 +0000 (17:02 +0800)]
cpufreq: add different freqs variable for big&little core [1/1]
PD#SWPL-15315
Problem:
add different freqs variable for big&little core
Solution:
add different freqs variable for big&little core
Verify:
test pass on g12b_w400
Change-Id: I2a5e00b5bbd4a1d084b925733a051497c6e92b0b
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Yong Qin [Fri, 27 Sep 2019 01:54:34 +0000 (09:54 +0800)]
cec: remove the delay time when get phy addr [1/1]
PD#OTT-6364
Problem:
When no hdmi cable connect, framework call get phy address,
will case 2s delay.
Solution:
1.If there is no HPD,needn't waitting TX finished reading the EDID
2.Reduce time out sleep time.
Verify:
W400
Change-Id: I2749e877e8b214355094390364e3711e6f1bbf12
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Zhongfu Luo [Tue, 15 Oct 2019 05:49:33 +0000 (13:49 +0800)]
efuse: fix KASAN bug [1/1]
PD#TV-11119
Problem:
BUG: KASAN: stack-out-of-bounds in
meson64_trustzone_efuse+0x168/0x268
Solution:
fix retcnt variable type
Verify:
tl1 skt
Change-Id: I54d9bb598277db539b68f2e741288348eb026e01
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
yao liu [Tue, 15 Oct 2019 07:34:13 +0000 (15:34 +0800)]
dv: display abnormal at 1080p24hz [1/1]
PD#SWPL-12495
Problem:
vpotch is small at 1080p24hz
Solution:
increase vpotch to 0x60
Verify:
SM1
Change-Id: I1505b0742b7e58c89396673e68b55384fa09551c
Signed-off-by: yao liu <yao.liu@amlogic.com>
Nan Li [Sat, 12 Oct 2019 13:14:53 +0000 (21:14 +0800)]
sdio: optimize sdio tuning print [1/1]
PD#SWPL-14443
Problem:
sdio tuning print info is too much.
Solution:
optimize tuning print.
Verify:
tl1
Change-Id: Ia0a0315eb30480b0014aa1e35d12b50576221f2e
Signed-off-by: Nan Li <nan.li@amlogic.com>
Xihai Zhu [Thu, 10 Oct 2019 11:40:11 +0000 (07:40 -0400)]
amvecm: have CMS setting applied in isr [1/1]
PD#SWPL-15013
Problem:
CMS setting is overrided by CM2 apply
Solution:
similar as CM2 apply, have CMS setting get
programed in isr
Verify:
tl1
Change-Id: I662c6c4eaff62cc031d0ca58186a83921bbc0224
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Lei Yang [Wed, 9 Oct 2019 11:35:37 +0000 (19:35 +0800)]
hdmirx: keep SCDC_EN on [1/1]
PD#SWPL-14701
Problem:
AppleTV box always read SCDC status whether EDID support 2.0 or not
Solution:
1.Cannot disable scdc function at hdmi1.4 mode.
otherwise appletv didnot sent valid data
2.remove oscillator mode in algorithm of PHY pll
Verify:
962X2
Change-Id: I6b87c8268073e52f2393844989fcf50057a99ace
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
MingLiang Dong [Sat, 21 Sep 2019 08:16:31 +0000 (04:16 -0400)]
hdr: hdr tone mapping clip according to source max luminance [1/1]
PD#SWPL-14461
Problem:
hdr tone mapping from 0 to 10000, if source luminance is smaller,
color is abnormal
Solution:
hdr tone mapping clip according to source max luminance
Verify:
verify on TL1
Change-Id: I7faeeb522409c3d1418b2706c7cfd3dd41d9df8d
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
shaochan.liu [Fri, 20 Sep 2019 09:31:01 +0000 (17:31 +0800)]
lcd: 1.3.15 HS Exit compliance testing for 480p and 720p [2/2]
PD#SH-1295
Problem:
need A113D mipi HS Exit compliance testing for 480p and 720p
Solution:
1, add A113D mipi HS Exit compliance testing
2, add 480p and 720p panel setting
Verify:
A113D_s400
Change-Id: I4c95b5532782f6f083c4d61a43cc17cb8ed120b6
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Jiamin Ma [Fri, 11 Oct 2019 09:34:01 +0000 (17:34 +0800)]
backtrace: add validation checking for fp [1/1]
PD#SWPL-15010
Problem:
Crash if keep executing echo w > /proc/sysrq-trigger
on android platform
Solution:
Add necessary checking for the fp to be dereferenced in
dump_backtrace_entry with VMAP stack enabled
Verify:
U212
Change-Id: I69d8d7353cf99a71dc3e7640efa1d460ef2f5f9a
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Hong Guo [Thu, 15 Aug 2019 06:32:00 +0000 (14:32 +0800)]
dvfs: update cpufreq table for sm1 corner [1/1]
PD#SWPL-13264
Problem:
update cpufreq table for sm1 corner
Solution:
update cpufreq table for sm1 corner
Verify:
test pass on sm1_ac200
Change-Id: Iba08ceb00dc00994e1c383090d6ff5d9dfb91ce3
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Pengcheng Chen [Thu, 10 Oct 2019 07:29:34 +0000 (15:29 +0800)]
osd: fix osd source crop issue [1/1]
PD#SWPL-14906
Problem:
osd source crop setting error.
Solution:
if source crop adjust blending out data.
Verify:
franklin
Change-Id: I067642ef6fe435da0c65362abedee49de3f1384d
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Pengcheng Chen [Sat, 12 Oct 2019 09:25:45 +0000 (17:25 +0800)]
osd: set gxm afbc hardware reset correctly [1/1]
PD#SWPL-13524
Problem:
gxm afbc hardware reset is not set.
Solution:
set gxm afbc hardware reset correctly
Verify:
Verified on S912
Change-Id: Iccde705fe408852671d367f1b3853a7055bdf050
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
xian [Fri, 11 Oct 2019 11:02:51 +0000 (07:02 -0400)]
cec: fix tv cec wake up select source issue [6/6]
PD#SWPL-13135
Problem:
When tv is waked up by one playback, it may wake up the
other playback ans show the source.
Solution:
LiveTv should take care of the situation and make the right
choice with information provided by cec hal service.
Verify:
verify it on Marconi
Change-Id: Ic27cdf77f0796a659400f90f60190354235777f3
Signed-off-by: xian <an.xi@amlogic.com>
jian.zhou [Sat, 12 Oct 2019 06:30:39 +0000 (02:30 -0400)]
audio: t9015 DACL_EN and DACR_EN only enable once [1/1]
PD#SWPL-13728
Problem:
when enable DACL_EN and DACR_EN, it will has pop sound
Solution:
Only enable DACL_EN and DACR_EN once at probe function
Verify:
U212
Change-Id: I0f26977ad5d9b86df264069f8732ddb44615cc09
Signed-off-by: jian.zhou <jian.zhou@amlogic.com>
fahui.feng [Fri, 26 Apr 2019 02:14:59 +0000 (10:14 +0800)]
audio: add usb karaoke driver [1/1]
PD#OTT-1624
Problem:
doesn't support Karaoke
Solution:
1) add usb karaoke driver
2) Default karaoke is disable. if enable it,
add "CONFIG_AMLOGIC_SND_USB_CAPTURE_DATA=y" in defconfig file.
Verify:
p212
Change-Id: I9f00873da930f9d5924fc752133ed51a4ae93636
Signed-off-by: fahui.feng <fahui.feng@amlogic.com>
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Luan Yuan [Sat, 12 Oct 2019 10:58:14 +0000 (18:58 +0800)]
dts: increase i2c3 clock frequency to 300k [2/2]
PD#SWPL-13393
Problem:
demod init cost about 8s
Solution:
increase i2c3 clock frequency
Verify:
on s905x3
Change-Id: Id8c7ec326b5cfccb5ec3ea4c286b95860527082a
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Gongwei Chen [Sat, 12 Oct 2019 08:24:33 +0000 (16:24 +0800)]
dts: A311D W400 add camera os08a10 [1/1]
PD#SWPL-15086
Problem:
A311D W400 add camera os08a10
Solution:
A311D W400 add camera os08a10
Verify:
Verify by Android P w400
Change-Id: I60cdfe3996ee5bf54bfba24972c3e0c46005401a
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
yao liu [Sat, 12 Oct 2019 06:02:25 +0000 (14:02 +0800)]
dv: last frame display wrong [1/1]
PD#SWPL-14994
Problem:
when decoder released earlier than video layer
closed, new_dovi_setting.video_width is set to
0 and dovi_setting_video_flag is set to flase,
which leads to dv core1 closed.
Solution:
Since new_dovi_setting.video_width is update
every frame at parse_metadata, there is no need
to clear new_dovi_setting.video_width at reg/unreg
Verify:
SM1
Change-Id: Icf1b90340263cf0df1987d8b85d591a98276fd57
Signed-off-by: yao liu <yao.liu@amlogic.com>
Luan Yuan [Sat, 12 Oct 2019 10:55:04 +0000 (18:55 +0800)]
emmc: run hs400 200M on sm1 [1/1]
PD#SWPL-12424
Problem:
run hs400 166M on sm1 now
Solution:
modify dts
Verify:
no need
Change-Id: If3b888e57bd35205abf00af122b1ba63f458e14c
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Luan Yuan [Sat, 12 Oct 2019 10:52:23 +0000 (18:52 +0800)]
dts: mbox add video11 and video12 for screencontrol [1/2]
PD#SWPL-13022
Problem:
mbox needs to support screencontrol
Solution:
add video11 and video12 node
Verify:
no need for ac214
Change-Id: I9de86652f1e16be154354cf44ce47d072a037fe0
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Yong Qin [Sun, 29 Sep 2019 01:44:16 +0000 (09:44 +0800)]
cec: Add Feature for freeze mode power on [2/2]
PD#TV-10483
Problem:
Add feature for freeze mode power on by cec.
Solution:
Add feature for freeze mode power on by cec.
Verify:
tl1
Change-Id: I5be3d672f71a30ed4a7ab445de616023946596ff
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Brian Zhu [Wed, 9 Oct 2019 17:24:07 +0000 (01:24 +0800)]
vpp: set the sr position reg correctly [1/1]
PD#SWPL-14963
Problem:
The position bits of super scaler is incorrect.
Solution:
Set the position bits correctly
Verify:
Verified on U212
Change-Id: I133662859456f65e130b8795f574da845039c717
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Hang Cheng [Thu, 10 Oct 2019 08:49:23 +0000 (16:49 +0800)]
hdmirx: pinmux later so as to prevent abnormal hpd pulse [1/1]
PD#SWPL-15003
Problem:
There's a pull high pulse of hpd when bootup. Reason:
pinctl-names is set "default" in dts, when bootup,
hdmirx related pinmux will be set by device driver
which is before hdmirx probe. As hpd pin of ic is
default low, after reverse by triode, it will output
high on hdmi receptacle. And after hdmirx probe, hpd
invertion will be enabled before finally output from
ic, so it will become normally low again on hdmi
receptacle. So there's a pull high pulse(1~4ms) output.
Solution:
GPIOW is high(1.4V) before pinmux, so hpd pin of receptacle
is low before pinmux. Need to enable hpd invertion before
GPIOW is muxed to hpd function. the way to delay pinmux
is to change pinctrl-names of dts from default to others.
Verify:
TL1
Change-Id: Ica54484fa4c3da46e7b1ddc72a3c5f44fd4a71f6
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Brian Zhu [Thu, 10 Oct 2019 11:44:46 +0000 (19:44 +0800)]
amcsc: need force to send fake frame for matrix updating [1/1]
PD#SWPL-14947
Problem:
When switch the display mode of VIU1 from panel to hdmi. The
csc matrix did not update correctly without video on.
Solution:
Force to trigger a fake frame to update csc matrix correctly.
Verify:
Verified on u202
Change-Id: I3e75a2d396ee1c752ed30bf01852afc8b9499f41
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Nan Li [Sat, 12 Oct 2019 06:09:33 +0000 (14:09 +0800)]
sd: fix dts set err [1/1]
PD#SWPL-14953
Problem:
commit:
64ef52a0160d33a2aa88eff05a373bafc6d8637d
arm64 dts set err.
Solution:
modify it.
Verify:
sm1_ac200
Change-Id: Ida45806ec2232435d9d7b40f5286a46528f8ab73
Signed-off-by: Nan Li <nan.li@amlogic.com>
Yong Qin [Sat, 28 Sep 2019 02:54:01 +0000 (10:54 +0800)]
cec: Add Feature for freeze mode power on [1/2]
PD#TV-10483
Problem:
Add feature for freeze mode power on by cec.
Solution:
Add feature for freeze mode power on by cec.
Verify:
tl1
Change-Id: I3e0271cb000d64c4b30cfc75c59e8ca374993d7f
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Qiufang Dai [Thu, 26 Sep 2019 14:06:15 +0000 (22:06 +0800)]
suspend: fix freeze hangup which caused by insmod [1/1]
PD#TV-10472
Problem:
When system on, enter freeze mode lead to flush deferd probe.
Init.rc also run insmod in parallel, if insmod task
atomic_inc(&probe_count), and this task is freezed,
deadlock happends.
Solution:
Move flush deferd probe action before freeze task
Verify:
X32A0-T972
Change-Id: I8949db32aea14e2da37e77658a9c999af39e2c83
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Nan Li [Thu, 10 Oct 2019 07:31:59 +0000 (15:31 +0800)]
sd: add sd power cycle for sd3.0 [1/1]
PD#SWPL-14953
Problem:
SD card 3.0 mode requires power cycle.
if not, the initialization of SD card will be affected.
Solution:
add SD power cycle supported.
Verify:
sm1_ac200
Change-Id: Ic8aecadf3b63660adb74ff4ecf0a5d38037b579f
Signed-off-by: Nan Li <nan.li@amlogic.com>
Gongwei Chen [Fri, 11 Oct 2019 07:18:31 +0000 (15:18 +0800)]
dtsi: A311D w400 has only hdmi output by default, panel has no output [1/3]
PD#SWPL-15024
Problem:
A311D w400 has only hdmi output by default, panel has no output
Solution:
modify clk
Verify:
Verify by Android P w400
Change-Id: I90d2defc509de2e559bb1ae1f4fcbcf38012b93c
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
Yong Qin [Fri, 11 Oct 2019 08:20:58 +0000 (16:20 +0800)]
vdin: Fix coverity error [1/1]
PD#SWPL-13987
Problem:
Fix coverity error.
Solution:
Fix coverity error.
Verify:
TL1
Change-Id: I5fec89f8980a4ea9b93e96e56dd857817695ad71
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Yong Qin [Fri, 11 Oct 2019 02:19:31 +0000 (10:19 +0800)]
cec: Fix coverity error [1/1]
PD#SWPL-13936
Problem:
Fix coverity error.
Solution:
Fix coverity error.
Verify:
TL1
Change-Id: I3e1af9370b47c1c9e06634f6cd4d04b2a229d664
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
MingLiang Dong [Thu, 10 Oct 2019 09:31:07 +0000 (17:31 +0800)]
hdr: fix tl1 hdr no effect [1/1]
PD#SWPL-12751
Problem:
1. tl1 hdr no effect
2. alway print [amvideo..] saturation_pre:0 hue_pre:0 mab:1000000
Solution:
1. seprate vd1/vd2 hdr process
2. fix vd2 metadata random change
Verify:
verify on TL1
Change-Id: I4d88b5b8758095ae90b2d2c06480bd9726e2cad1
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Bencheng Jing [Wed, 11 Sep 2019 03:46:35 +0000 (11:46 +0800)]
amvecm: fix pc/game mode not close saturation [1/1]
PD#SWPL-13896
Problem:
pc/game mode not close saturation
Solution:
add close saturation patch for chip after g12a
Verify:
verified by tl1
Change-Id: I28fe34d0b14700132e92a75ea8d8a7836ed7fd2b
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Gongwei Chen [Thu, 10 Oct 2019 11:10:14 +0000 (19:10 +0800)]
dts: add platform W200 [2/3]
PD#SWPL-15005
Problem:
need add platform W200
Solution:
add platform W200
Verify:
Verify by Android P w200
Change-Id: Ia1baacb5c62182fd17c4e1730a4ad6aeeaa71dda
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
yao liu [Wed, 9 Oct 2019 08:16:44 +0000 (04:16 -0400)]
dv: screen highlighting when playing some videos [1/1]
PD#SWPL-13043
Problem:
Too many prints cause the active line to be
too large when entering the DV process,
resulting in the LUT table of DV core1 not
being written completely
Solution:
Simplify printing in DV
Verify:
sm1
Change-Id: I4fd06f6a8b5e6d0b973077bbe92815224834857b
Signed-off-by: yao liu <yao.liu@amlogic.com>
MingLiang Dong [Wed, 25 Sep 2019 14:56:25 +0000 (10:56 -0400)]
amvecm: fix contrast adj without uv shift [1/1]
PD#SWPL-14629
Problem:
fix contrast adj without uv shift
Solution:
workaround with vd1 mtx, add uv shift the same gain with your
Verify:
verify on TL1
Change-Id: I5456b75463ff2c999a8e6d4b42129a909ecfd666
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Evoke Zhang [Wed, 9 Oct 2019 02:52:38 +0000 (10:52 +0800)]
cvbsout: fix cgms bit mistake for NTSC [1/1]
PD#OTT-5683
Problem:
NTSC cgms data bit is incorrect
Solution:
fix cgms bit mistake
Verify:
u212
Change-Id: If1d26714eeed9061773c25871715713b122d9980
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
changqing.gao [Wed, 18 Sep 2019 03:03:10 +0000 (11:03 +0800)]
ramdump: support ramdump for tm2 [3/3]
PD#SWPL-13275
Problem:
ramdump is not enabled on tm2.
Solution:
Add ramdump support on tm2 in kernel.
Verify:
verified on tm2_t962x3_ab301_v1.
Change-Id: I1e8fd2e14ba1bc02e47c6e15c534da449352b723
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
shaochan.liu [Fri, 27 Sep 2019 10:04:50 +0000 (18:04 +0800)]
lcd: optimize ss_set in power_step [2/2]
PD#TV-10240
Problem:
need optimize ss_set in power_step
Solution:
optimize ss_set in power_step
Verify:
t962x2-x301
Change-Id: I435e5659cbc7225cc957d2fa233c5dee70f894a2
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Pengcheng Chen [Tue, 8 Oct 2019 09:10:38 +0000 (17:10 +0800)]
osd: fix exit hdr play,screen flash for osd hdr matrix not sync [1/1]
PD#SWPL-14902
Problem:
Play HDR video locally, after exiting, the screen flashes 1, 2 seconds
Solution:
set rdma_hdr_delay default value to 0
Verify:
Verified by T962-P321
Change-Id: I9c0a56332e38d1238129e682535f588104faf8be
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Lei Yang [Sun, 29 Sep 2019 07:18:06 +0000 (15:18 +0800)]
hdmirx: modify recovery flow for aud_pll error [1/1]
PD#SWPL-14776
Problem:
aud pll is zero. need to reset aud bandgap
Solution:
modify related recovery flow
Verify:
TXLX
Change-Id: If8ba596cb7bec81165a0b2f80aa388579cc68411
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
zhiwei.yuan [Tue, 8 Oct 2019 07:26:08 +0000 (15:26 +0800)]
vdin: [side-effect]hdmi 4k,garbage is seen at the bottom [1/1]
PD#SWPL-14760
Problem:
There's no enough mem for screen cap
Solution:
Inc mem only for HDMI 4k afbce
Verify:
verified by t962x2_x301
Change-Id: I688bc67f5b9f754ae3db9fa650778cf36eec18dc
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Bencheng Jing [Thu, 16 May 2019 05:50:02 +0000 (13:50 +0800)]
amvecm: fix sat_hue_post ioctrl set error [1/1]
PD#SWPL-14583
Problem:
1.fix sat_hue_post ioctrl set error
2.fix brightness2 set error
Solution:
fix sat_hue_post ioctrl set error
Verify:
u212
Change-Id: I181840fabfec6a3625056ffa95f62d8e50730129
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Evoke Zhang [Wed, 25 Sep 2019 09:58:57 +0000 (17:58 +0800)]
tvafe: reinit tvafe when atv demod rescan [1/1]
PD#SWPL-14610
Problem:
121.25MHz PAL-M Recognized to NTSC-M
Solution:
add reinit tvafe function for atv demod rescan
Verify:
x301
Change-Id: I8d303374f3e1e6e3c84e81d4332735b6687df01b
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
robin zhu [Tue, 1 Oct 2019 03:16:32 +0000 (20:16 -0700)]
dv: flash when start playing dv [1/1]
PD#SWPL-14836
Problem:
1) video enable flag is not update correctly
2) source format not update correctly,
which cause wrong dv control path reset
3) when start play video off and repeat frame,
triggers wrong fake sdr frame
Solution:
1) change video enable flag to use both
video_global_output and video_enabled
2) use latest src format insdead of using cur format
3) add repeat frame and video on to off flag to
prevent wrong fake sdr frame
Verify:
Verified on AC213
Change-Id: Ia8ee7bea0b8bcb33e18275611287e0b563caf978
Signed-off-by: robin zhu <robin.zhu@amlogic.com>
Xingyu Chen [Wed, 9 Oct 2019 02:34:55 +0000 (10:34 +0800)]
wdt: add option to avoid the wdt is disabled casually [1/1]
PD#SWPL-14925
Problem:
The system can't be reset by wdt which is fed by the tv-service
when the tv-service is abnormally hanged.
Solution:
Add extra option to avoid the wdt is disabled when the fed dog
thread aborts, but we can disable wdt when certain condition is
met.
Verify:
test pass on customer board
Change-Id: I1fd5ff4e36f06bda99726c0a2ced399299596f95
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
nengwen.chen [Sun, 29 Sep 2019 11:22:36 +0000 (19:22 +0800)]
atv_demod: fix atv non_std_en == 4 [1/1]
PD#TV-10383
Problem:
fix atv non_std_en == 4.
Solution:
1.fix atv non_std_en == 4.
Verify:
Verified by x301
Change-Id: I25286d1f1472411fcc37255eaef80436ed0f2c26
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Pengcheng Chen [Fri, 6 Sep 2019 08:52:07 +0000 (16:52 +0800)]
dv: fix one picture displayed playing mvc when dv is on [1/1]
PD#SWPL-13590
Problem:
only one picture displayed playing 3D mvc when dv is on
Solution:
when playing 3D mvc bypass dv.
Verify:
Verified by u212
Change-Id: I73c85808b7aad91a009b1e80f2514545e96eedf2
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Xing Wang [Wed, 25 Sep 2019 02:24:14 +0000 (10:24 +0800)]
audio: auge: toddr irq interrupt protection for freeze mode [1/1]
PD#TV-10448
Problem:
crash when finished early supend but not entry suspend,
the system is waked up
Solution:
add toddr irq interrupt protection when entry suspend
and exit from suspend
Verify:
x301
Change-Id: I7ade7a745511bab83c70b5649b6af318163568d9
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Xihai Zhu [Fri, 27 Sep 2019 02:24:33 +0000 (22:24 -0400)]
amvecm: fix coverity issue detected [1/1]
PD#SWPL-14679
Problem:
coverity issue detected, logical operation
is wrongly used for bit operation
Solution:
update related code
Verify:
tl1
Change-Id: I3b98e702205382dabe4b0cd75f9586cac1bccd48
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Brian Zhu [Mon, 30 Sep 2019 10:41:33 +0000 (18:41 +0800)]
dv: need update the right osd size for core2 [1/1]
PD#SWPL-14748
Problem:
DV core2 did not update the osd size.
Solution:
monitor the osd size change in dv processing
Verify:
Verifed on U212
Change-Id: Icade183483bd0f12f3d1d5424b38ac97ac1c83d1
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Xihai Zhu [Wed, 25 Sep 2019 02:06:51 +0000 (22:06 -0400)]
amvecm: LC input matrix impovement [1/1]
PD#SWPL-14555
Problem:
there is luma level drop issue while
on/off LC module
Solution:
per VLSI suggestion, use same VPP standard
matrix, and also handle the bitdepth option
correctly
Verify:
tl1
Change-Id: I5450c60dc055ec6493327b77e1295e55e6405fe7
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Chuangcheng Peng [Mon, 16 Sep 2019 06:30:56 +0000 (14:30 +0800)]
dvb: support two si2168(si2151/av2018) [2/3]
PD#SWPL-13198
Problem:
support U212-D814
Solution:
support U212-D814
Verify:
verify at u212-D814
Change-Id: I2c458b36fc2bee08ddd24e2da016a68515bb82da
Signed-off-by: Chuangcheng Peng <chuangcheng.peng@amlogic.com>
zhiwei.yuan [Fri, 27 Sep 2019 09:46:52 +0000 (17:46 +0800)]
vdin: hdmi 4k,garbage is seen at the bottom [1/1]
PD#SWPL-14760
Problem:
afbce write need more memory since block can not be separater
Solution:
increase memory size for each frame
Verify:
verified by t962x2_x301
Change-Id: I5a80d0d6f22ef72353bf8b9faa904ec4f4b7c7aa
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Lei Yang [Sun, 29 Sep 2019 10:03:35 +0000 (18:03 +0800)]
hdmirx: revert commit 86761 [1/1]
PD#SWPL-14763
Problem:
rx cannot work after suspend
Solution:
rx22 memory issue. revert related commit.
Verify:
TL1
Change-Id: Ia3a092e2fc602470e4ffc54f0d3b25ae0221f69f
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
zhiwei.yuan [Wed, 25 Sep 2019 08:22:43 +0000 (16:22 +0800)]
vdin: TvPlayer ANR when screen capture [1/1]
PD#SWPL-14561
Problem:
caused by enc v line check mechanism
Solution:
remove line check since it's unnecessary
Verify:
verified by t962x2_x301
Change-Id: Ic2578b99234ac001baf2e12314119e6a01b0a79c
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Qianggui Song [Sun, 29 Sep 2019 10:55:08 +0000 (18:55 +0800)]
ir: cannot wakeup system when keep pressing power key [1/1]
PD#SWPL-14797
Problem:
In freeze mode, keep press power key won't wake up system.
Solution:
replace pm_wakup_event with pm_stay_awake
Verify:
tl1
Change-Id: I5b88714ff45034280ec1d638f86b51fa54e2a011
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Jiamin Ma [Mon, 30 Sep 2019 00:35:00 +0000 (08:35 +0800)]
page_trace: fix compile error [1/1]
PD#SWPL-14800
Problem:
Compile error
Solution:
Fix compile error
Verify:
Compile pass
Change-Id: Iffb95fef1572e4ce17ec80f0765920b8afad8513
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
projects / platform / kernel / linux-amlogic.git / log