Anssi Hannula [Mon, 17 Dec 2018 13:05:41 +0000 (15:05 +0200)]
net: macb: add missing barriers when reading descriptors
[ Upstream commit
6e0af298066f3b6d99f58989bb0dca6f764b4c6d ]
When reading buffer descriptors on RX or on TX completion, an
RX_USED/TX_USED bit is checked first to ensure that the descriptors have
been populated, i.e. the ownership has been transferred. However, there
are no memory barriers to ensure that the data protected by the
RX_USED/TX_USED bit is up-to-date with respect to that bit.
Specifically:
- TX timestamp descriptors may be loaded before ctrl is loaded for the
TX_USED check, which is racy as the descriptors may be updated between
the loads, causing old timestamp descriptor data to be used.
- RX ctrl may be loaded before addr is loaded for the RX_USED check,
which is racy as a new frame may be written between the loads, causing
old ctrl descriptor data to be used.
This issue exists for both macb_rx() and gem_rx() variants.
Fix the races by adding DMA read memory barriers on those paths and
reordering the reads in macb_rx().
I have not observed any actual problems in practice caused by these
being missing, though.
Tested on a ZynqMP based system.
Fixes:
89e5785fc8a6 ("[PATCH] Atmel MACB ethernet driver")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anssi Hannula [Mon, 17 Dec 2018 13:05:40 +0000 (15:05 +0200)]
net: macb: fix dropped RX frames due to a race
[ Upstream commit
8159ecab0db9095902d4c73605fb8787f5c7d653 ]
Bit RX_USED set to 0 in the address field allows the controller to write
data to the receive buffer descriptor.
The driver does not ensure the ctrl field is ready (cleared) when the
controller sees the RX_USED=0 written by the driver. The ctrl field might
only be cleared after the controller has already updated it according to
a newly received frame, causing the frame to be discarded in gem_rx() due
to unexpected ctrl field contents.
A message is logged when the above scenario occurs:
macb
ff0b0000.ethernet eth0: not whole frame pointed by descriptor
Fix the issue by ensuring that when the controller sees RX_USED=0 the
ctrl field is already cleared.
This issue was observed on a ZynqMP based system.
Fixes:
4df95131ea80 ("net/macb: change RX path for GEM")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anssi Hannula [Mon, 17 Dec 2018 13:05:39 +0000 (15:05 +0200)]
net: macb: fix random memory corruption on RX with 64-bit DMA
[ Upstream commit
e100a897bf9b19089e57f236f2398c9e0538900e ]
64-bit DMA addresses are split in upper and lower halves that are
written in separate fields on GEM. For RX, bit 0 of the address is used
as the ownership bit (RX_USED). When the RX_USED bit is unset the
controller is allowed to write data to the buffer.
The driver does not guarantee that the controller already sees the upper
half when the RX_USED bit is cleared, possibly resulting in the
controller writing an incoming frame to an address with an incorrect
upper half and therefore possibly corrupting unrelated system memory.
Fix that by adding the necessary DMA memory barrier between the writes.
This corruption was observed on a ZynqMP based system.
Fixes:
fff8019a08b6 ("net: macb: Add 64 bit addressing support for GEM")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Acked-by: Harini Katakam <harini.katakam@xilinx.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 17 Dec 2018 07:05:13 +0000 (10:05 +0300)]
qed: Fix an error code qed_ll2_start_xmit()
[ Upstream commit
f07d4276892d97671e880190ff195a288b2d8d92 ]
We accidentally deleted the code to set "rc = -ENOMEM;" and this patch
adds it back.
Fixes:
d2201a21598a ("qed: No need for LL2 frags indication")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Mon, 17 Dec 2018 22:38:51 +0000 (17:38 -0500)]
SUNRPC: Fix a race with XPRT_CONNECTING
[ Upstream commit
cf76785d30712d90185455e752337acdb53d2a5d ]
Ensure that we clear XPRT_CONNECTING before releasing the XPRT_LOCK so that
we don't have races between the (asynchronous) socket setup code and
tasks in xprt_connect().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sara Sharon [Sat, 15 Dec 2018 09:03:10 +0000 (11:03 +0200)]
mac80211: fix a kernel panic when TXing after TXQ teardown
[ Upstream commit
a50e5fb8db83c5b57392204c21ea6c5c4ccefde6 ]
Recently TXQ teardown was moved earlier in ieee80211_unregister_hw(),
to avoid a use-after-free of the netdev data. However, interfaces
aren't fully removed at the point, and cfg80211_shutdown_all_interfaces
can for example, TX a deauth frame. Move the TXQ teardown to the
point between cfg80211_shutdown_all_interfaces and the free of
netdev queues, so we can be sure they are torn down before netdev
is freed, but after there is no ongoing TX.
Fixes:
77cfaf52eca5 ("mac80211: Run TXQ teardown code before de-registering interfaces")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonglong Liu [Sat, 15 Dec 2018 03:53:29 +0000 (11:53 +0800)]
net: hns: Fix ping failed when use net bridge and send multicast
[ Upstream commit
6adafc356e20189193b38ee6b9af7743078bf6b4 ]
Create a net bridge, add eth and vnet to the bridge. The vnet is used
by a virtual machine. When ping the virtual machine from the outside
host and the virtual machine send multicast at the same time, the ping
package will lost.
The multicast package send to the eth, eth will send it to the bridge too,
and the bridge learn the mac of eth. When outside host ping the virtual
mechine, it will match the promisc entry of the eth which is not expected,
and the bridge send it to eth not to vnet, cause ping lost.
So this patch change promisc tcam entry position to the END of 512 tcam
entries, which indicate lower priority. And separate one promisc entry to
two: mc & uc, to avoid package match the wrong tcam entry.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonglong Liu [Sat, 15 Dec 2018 03:53:28 +0000 (11:53 +0800)]
net: hns: Add mac pcs config when enable|disable mac
[ Upstream commit
726ae5c9e5f0c18eca8ea5296b526242c3e89822 ]
In some case, when mac enable|disable and adjust link, may cause hard to
link(or abnormal) between mac and phy. This patch adds the code for rx PCS
to avoid this bug.
Disable the rx PCS when driver disable the gmac, and enable the rx PCS
when driver enable the mac.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonglong Liu [Sat, 15 Dec 2018 03:53:27 +0000 (11:53 +0800)]
net: hns: Fix ntuple-filters status error.
[ Upstream commit
7e74a19ca522aec7c2be201a7ae1d1d57ded409b ]
The ntuple-filters features is forced on by chip.
But it shows "ntuple-filters: off [fixed]" when use ethtool.
This patch make it correct with "ntuple-filters: on [fixed]".
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonglong Liu [Sat, 15 Dec 2018 03:53:26 +0000 (11:53 +0800)]
net: hns: Avoid net reset caused by pause frames storm
[ Upstream commit
a57275d35576fdd89d8c771eedf1e7cf97e0dfa6 ]
There will be a large number of MAC pause frames on the net,
which caused tx timeout of net device. And then the net device
was reset to try to recover it. So that is not useful, and will
cause some other problems.
So need doubled ndev->watchdog_timeo if device watchdog occurred
until watchdog_timeo up to 40s and then try resetting to recover
it.
When collecting dfx information such as hardware registers when tx timeout.
Some registers for count were cleared when read. So need move this task
before update net state which also read the count registers.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonglong Liu [Sat, 15 Dec 2018 03:53:25 +0000 (11:53 +0800)]
net: hns: Free irq when exit from abnormal branch
[ Upstream commit
c82bd077e1ba3dd586569c733dc6d3dd4b0e43cd ]
1.In "hns_nic_init_irq", if request irq fail at index i,
the function return directly without releasing irq resources
that already requested.
2.In "hns_nic_net_up" after "hns_nic_init_irq",
if exceptional branch occurs, irqs that already requested
are not release.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonglong Liu [Sat, 15 Dec 2018 03:53:24 +0000 (11:53 +0800)]
net: hns: Clean rx fbd when ae stopped.
[ Upstream commit
31f6b61d810654fb3ef43f4d8afda0f44b142fad ]
If there are packets in hardware when changing the speed or duplex,
it may cause hardware hang up.
This patch adds the code to wait rx fbd clean up when ae stopped.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonglong Liu [Sat, 15 Dec 2018 03:53:23 +0000 (11:53 +0800)]
net: hns: Fixed bug that netdev was opened twice
[ Upstream commit
5778b13b64eca5549d242686f2f91a2c80c8fa40 ]
After resetting dsaf to try to repair chip error such as ecc error,
the net device will be open if net interface is up. But at this time
if there is the users set the net device up with the command ifconfig,
the net device will be opened twice consecutively.
Function napi_enable was called when open device. And Kernel panic will
be occurred if it was called twice consecutively. Such as follow:
static inline void napi_enable(struct napi_struct *n)
{
BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
smp_mb__before_clear_bit();
clear_bit(NAPI_STATE_SCHED, &n->state);
}
[37255.571996] Kernel panic - not syncing: BUG!
[37255.595234] Call trace:
[37255.597694] [<
ffff80000008ab48>] dump_backtrace+0x0/0x1a0
[37255.603114] [<
ffff80000008ad08>] show_stack+0x20/0x28
[37255.608187] [<
ffff8000009c4944>] dump_stack+0x98/0xb8
[37255.613258] [<
ffff8000009c149c>] panic+0x10c/0x26c
[37255.618070] [<
ffff80000070f134>] hns_nic_net_up+0x30c/0x4e0
[37255.623664] [<
ffff80000070f39c>] hns_nic_net_open+0x94/0x12c
[37255.629346] [<
ffff80000084be78>] __dev_open+0xf4/0x168
[37255.634504] [<
ffff80000084c1ac>] __dev_change_flags+0x98/0x15c
[37255.640359] [<
ffff80000084c29c>] dev_change_flags+0x2c/0x68
[37255.769580] [<
ffff8000008dc400>] devinet_ioctl+0x650/0x704
[37255.775086] [<
ffff8000008ddc38>] inet_ioctl+0x98/0xb4
[37255.780159] [<
ffff800000827b7c>] sock_do_ioctl+0x44/0x84
[37255.785490] [<
ffff800000828e04>] sock_ioctl+0x248/0x30c
[37255.790737] [<
ffff80000026dc6c>] do_vfs_ioctl+0x480/0x618
[37255.796156] [<
ffff80000026de94>] SyS_ioctl+0x90/0xa4
[37255.801139] SMP: stopping secondary CPUs
[37255.805079] kbox: catch panic event.
[37255.809586] collected_len = 128928, LOG_BUF_LEN_LOCAL = 131072
[37255.816103] flush cache 0xffff80003f000000 size 0x800000
[37255.822192] flush cache 0xffff80003f000000 size 0x800000
[37255.828289] flush cache 0xffff80003f000000 size 0x800000
[37255.834378] kbox: no notify die func register. no need to notify
[37255.840413] ---[ end Kernel panic - not syncing: BUG!
This patchset fix this bug according to the flag NIC_STATE_DOWN.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonglong Liu [Sat, 15 Dec 2018 03:53:22 +0000 (11:53 +0800)]
net: hns: Some registers use wrong address according to the datasheet.
[ Upstream commit
4ad26f117b6ea0f5d5f1592127bafb5ec65904d3 ]
According to the hip06 datasheet:
1.Six registers use wrong address:
RCB_COM_SF_CFG_INTMASK_RING
RCB_COM_SF_CFG_RING_STS
RCB_COM_SF_CFG_RING
RCB_COM_SF_CFG_INTMASK_BD
RCB_COM_SF_CFG_BD_RINT_STS
DSAF_INODE_VC1_IN_PKT_NUM_0_REG
2.The offset of DSAF_INODE_VC1_IN_PKT_NUM_0_REG should be
0x103C + 0x80 * all_chn_num
3.The offset to show the value of DSAF_INODE_IN_DATA_STP_DISC_0_REG
is wrong, so the value of DSAF_INODE_SW_VLAN_TAG_DISC_0_REG will be
overwrite
These registers are only used in "ethtool -d", so that did not cause ndev
to misfunction.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonglong Liu [Sat, 15 Dec 2018 03:53:21 +0000 (11:53 +0800)]
net: hns: All ports can not work when insmod hns ko after rmmod.
[ Upstream commit
308c6cafde0147616da45e3a928adae55c428deb ]
There are two test cases:
1. Remove the 4 modules:hns_enet_drv/hns_dsaf/hnae/hns_mdio,
and install them again, must use "ifconfig down/ifconfig up"
command pair to bring port to work.
This patch calls phy_stop function when init phy to fix this bug.
2. Remove the 2 modules:hns_enet_drv/hns_dsaf, and install them again,
all ports can not use anymore, because of the phy devices register
failed(phy devices already exists).
Phy devices are registered when hns_dsaf installed, this patch
removes them when hns_dsaf removed.
The two cases are sometimes related, fixing the second case also requires
fixing the first case, so fix them together.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonglong Liu [Sat, 15 Dec 2018 03:53:20 +0000 (11:53 +0800)]
net: hns: Incorrect offset address used for some registers.
[ Upstream commit
4e1d4be681b2c26fd874adbf584bf034573ac45d ]
According to the hip06 Datasheet:
1. The offset of INGRESS_SW_VLAN_TAG_DISC should be 0x1A00+4*all_chn_num
2. The offset of INGRESS_IN_DATA_STP_DISC should be 0x1A50+4*all_chn_num
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 10 Dec 2018 20:45:07 +0000 (21:45 +0100)]
w90p910_ether: remove incorrect __init annotation
[ Upstream commit
51367e423c6501a26e67d91a655d2bc892303462 ]
The get_mac_address() function is normally inline, but when it is
not, we get a warning that this configuration is broken:
WARNING: vmlinux.o(.text+0x4aff00): Section mismatch in reference from the function w90p910_ether_setup() to the function .init.text:get_mac_address()
The function w90p910_ether_setup() references
the function __init get_mac_address().
This is often because w90p910_ether_setup lacks a __init
Remove the __init to make it always do the right thing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Atul Gupta [Tue, 11 Dec 2018 10:19:40 +0000 (02:19 -0800)]
net/tls: Init routines in create_ctx
[ Upstream commit
6c0563e442528733219afe15c749eb2cc365da3f ]
create_ctx is called from tls_init and tls_hw_prot
hence initialize function pointers in common routine.
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Tue, 11 Dec 2018 04:20:30 +0000 (21:20 -0700)]
drivers: net: xgene: Remove unnecessary forward declarations
[ Upstream commit
2ab4c3426c0cf711d7147e3f559638e4ab88960e ]
Clang warns:
drivers/net/ethernet/apm/xgene/xgene_enet_main.c:33:36: warning:
tentative array definition assumed to have one element
static const struct acpi_device_id xgene_enet_acpi_match[];
^
1 warning generated.
Both xgene_enet_acpi_match and xgene_enet_of_match are defined before
their uses at the bottom of the file so this is unnecessary. When
CONFIG_ACPI is disabled, ACPI_PTR becomes NULL so xgene_enet_acpi_match
doesn't need to be defined.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sinan Kaya [Sat, 1 Dec 2018 21:40:38 +0000 (21:40 +0000)]
x86, hyperv: remove PCI dependency
[ Upstream commit
c629421a990033ba539eb8585e73a2e6fa9ea631 ]
Need to be able to boot without PCI devices present.
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Fri, 16 Nov 2018 16:19:21 +0000 (17:19 +0100)]
mt76: fix potential NULL pointer dereference in mt76_stop_tx_queues
[ Upstream commit
7c250f4612ae97aa04500c0d0cff69bb87046e3a ]
Starting from mac80211 commit
adf8ed01e4fd ("mac80211: add an optional
TXQ for other PS-buffered frames") and commit
0eeb2b674f05 ("mac80211:
add an option for station management TXQ") a new per-sta queue has been
introduced for bufferable management frames.
sta->txq[IEEE80211_NUM_TIDS] is initialized just if the driver reports
the following hw flags:
- IEEE80211_HW_STA_MMPDU_TXQ
- IEEE80211_HW_BUFF_MMPDU_TXQ
This can produce a NULL pointer dereference in mt76_stop_tx_queues
since mt76 iterates on all available sta tx queues assuming they are
initialized by mac80211. This issue has been spotted analyzing the code
(it has not triggered any crash yet)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Varun Prakash [Fri, 9 Nov 2018 15:29:46 +0000 (20:59 +0530)]
scsi: target: iscsi: cxgbit: add missing spin_lock_init()
[ Upstream commit
9e6371d3c6913ff1707fb2c0274c9925f7aaef80 ]
Add missing spin_lock_init() for cdev->np_lock.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Varun Prakash [Fri, 9 Nov 2018 15:29:01 +0000 (20:59 +0530)]
scsi: target: iscsi: cxgbit: fix csk leak
[ Upstream commit
801df68d617e3cb831f531c99fa6003620e6b343 ]
csk leak can happen if a new TCP connection gets established after
cxgbit_accept_np() returns, to fix this leak free remaining csk in
cxgbit_free_np().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudarsana Reddy Kalluru [Wed, 12 Dec 2018 16:57:03 +0000 (08:57 -0800)]
bnx2x: Send update-svid ramrod with retry/poll flags enabled
[ Upstream commit
9061193c4ee065d3240fde06767c2e06ec61decc ]
Driver sends update-SVID ramrod in the MFW notification path.
If there is a pending ramrod, driver doesn't retry the command
and storm firmware will never be updated with the SVID value.
The patch adds changes to send update-svid ramrod in process context with
retry/poll flags set.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudarsana Reddy Kalluru [Wed, 12 Dec 2018 16:57:01 +0000 (08:57 -0800)]
bnx2x: Remove configured vlans as part of unload sequence.
[ Upstream commit
04f05230c5c13b1384f66f5186a68d7499e34622 ]
Vlans are not getting removed when drivers are unloaded. The recent storm
firmware versions had added safeguards against re-configuring an already
configured vlan. As a result, PF inner reload flows (e.g., mtu change)
might trigger an assertion.
This change is going to remove vlans (same as we do for MACs) when doing
a chip cleanup during unload.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudarsana Reddy Kalluru [Wed, 12 Dec 2018 16:57:00 +0000 (08:57 -0800)]
bnx2x: Clear fip MAC when fcoe offload support is disabled
[ Upstream commit
bbf666c1af916ed74795493c564df6fad462cc80 ]
On some customer setups it was observed that shmem contains a non-zero fip
MAC for 57711 which would lead to enabling of SW FCoE.
Add a software workaround to clear the bad fip mac address if no FCoE
connections are supported.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Taehee Yoo [Sat, 8 Dec 2018 02:03:01 +0000 (11:03 +0900)]
netfilter: nf_conncount: use rb_link_node_rcu() instead of rb_link_node()
[ Upstream commit
d4e7df16567b80836a78d31b42f1a9355a636d67 ]
rbnode in insert_tree() is rcu protected pointer.
So, in order to handle this pointer, _rcu function should be used.
rb_link_node_rcu() is a rcu version of rb_link_node().
Fixes:
34848d5c896e ("netfilter: nf_conncount: Split insert and traversal")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Tue, 11 Dec 2018 06:45:29 +0000 (07:45 +0100)]
netfilter: nat: can't use dst_hold on noref dst
[ Upstream commit
542fbda0f08f1cbbc250f9e59f7537649651d0c8 ]
The dst entry might already have a zero refcount, waiting on rcu list
to be free'd. Using dst_hold() transitions its reference count to 1, and
next dst release will try to free it again -- resulting in a double free:
WARNING: CPU: 1 PID: 0 at include/net/dst.h:239 nf_xfrm_me_harder+0xe7/0x130 [nf_nat]
RIP: 0010:nf_xfrm_me_harder+0xe7/0x130 [nf_nat]
Code: 48 8b 5c 24 60 65 48 33 1c 25 28 00 00 00 75 53 48 83 c4 68 5b 5d 41 5c c3 85 c0 74 0d 8d 48 01 f0 0f b1 0a 74 86 85 c0 75 f3 <0f> 0b e9 7b ff ff ff 29 c6 31 d2 b9 20 00 48 00 4c 89 e7 e8 31 27
Call Trace:
nf_nat_ipv4_out+0x78/0x90 [nf_nat_ipv4]
nf_hook_slow+0x36/0xd0
ip_output+0x9f/0xd0
ip_forward+0x328/0x440
ip_rcv+0x8a/0xb0
Use dst_hold_safe instead and bail out if we cannot take a reference.
Fixes:
a4c2fd7f7891 ("net: remove DST_NOCACHE flag")
Reported-by: Martin Zaharinov <micron10@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pan Bian [Mon, 10 Dec 2018 13:39:37 +0000 (14:39 +0100)]
netfilter: ipset: do not call ipset_nest_end after nla_nest_cancel
[ Upstream commit
708abf74dd87f8640871b814faa195fb5970b0e3 ]
In the error handling block, nla_nest_cancel(skb, atd) is called to
cancel the nest operation. But then, ipset_nest_end(skb, atd) is
unexpected called to end the nest operation. This patch calls the
ipset_nest_end only on the branch that nla_nest_cancel is not called.
Fixes:
45040978c899 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ross Lagerwall [Wed, 5 Dec 2018 13:54:26 +0000 (13:54 +0000)]
ixgbe: Fix race when the VF driver does a reset
[ Upstream commit
96d1a731611f711f0cb82cea93363ae2ea8cb028 ]
When the VF driver does a reset, it (at least the Linux one) writes to
the VFCTRL register to issue a reset and then immediately sends a reset
message using the mailbox API. This is racy because when the PF driver
detects that the VFCTRL register reset pin has been asserted, it clears
the mailbox memory. Depending on ordering, the reset message sent by
the VF could be cleared by the PF driver. It then responds to the
cleared message with a NACK which causes the VF driver to malfunction.
Fix this by deferring clearing the mailbox memory until the reset
message is received.
Fixes:
939b701ad633 ("ixgbe: fix driver behaviour after issuing VFLR")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Assmann [Tue, 4 Dec 2018 14:18:52 +0000 (15:18 +0100)]
i40e: fix mac filter delete when setting mac address
[ Upstream commit
158daed16efb1170694e420ae06ba8ba954d82e5 ]
A previous commit moved the ether_addr_copy() in i40e_set_mac() before
the mac filter del/add to avoid a race. However it wasn't taken into
account that this alters the mac address being handed to
i40e_del_mac_filter().
Also changed i40e_add_mac_filter() to operate on netdev->dev_addr,
hopefully that makes the code easier to read.
Fixes:
458867b2ca0c ("i40e: don't remove netdev->dev_addr when syncing uc list")
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kirill A. Shutemov [Fri, 30 Nov 2018 20:23:28 +0000 (23:23 +0300)]
x86/dump_pagetables: Fix LDT remap address marker
[ Upstream commit
254eb5505ca0ca749d3a491fc6668b6c16647a99 ]
The LDT remap placement has been changed. It's now placed before the direct
mapping in the kernel virtual address space for both paging modes.
Change address markers order accordingly.
Fixes:
d52888aa2753 ("x86/mm: Move LDT remap out of KASLR region on 5-level paging")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: dave.hansen@linux.intel.com
Cc: luto@kernel.org
Cc: peterz@infradead.org
Cc: boris.ostrovsky@oracle.com
Cc: jgross@suse.com
Cc: bhe@redhat.com
Cc: hans.van.kranenburg@mendix.com
Cc: linux-mm@kvack.org
Cc: xen-devel@lists.xenproject.org
Link: https://lkml.kernel.org/r/20181130202328.65359-3-kirill.shutemov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kirill A. Shutemov [Fri, 30 Nov 2018 20:23:27 +0000 (23:23 +0300)]
x86/mm: Fix guard hole handling
[ Upstream commit
16877a5570e0c5f4270d5b17f9bab427bcae9514 ]
There is a guard hole at the beginning of the kernel address space, also
used by hypervisors. It occupies 16 PGD entries.
This reserved range is not defined explicitely, it is calculated relative
to other entities: direct mapping and user space ranges.
The calculation got broken by recent changes of the kernel memory layout:
LDT remap range is now mapped before direct mapping and makes the
calculation invalid.
The breakage leads to crash on Xen dom0 boot[1].
Define the reserved range explicitely. It's part of kernel ABI (hypervisors
expect it to be stable) and must not depend on changes in the rest of
kernel memory layout.
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg03313.html
Fixes:
d52888aa2753 ("x86/mm: Move LDT remap out of KASLR region on 5-level paging")
Reported-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: dave.hansen@linux.intel.com
Cc: luto@kernel.org
Cc: peterz@infradead.org
Cc: boris.ostrovsky@oracle.com
Cc: bhe@redhat.com
Cc: linux-mm@kvack.org
Cc: xen-devel@lists.xenproject.org
Link: https://lkml.kernel.org/r/20181130202328.65359-2-kirill.shutemov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Tue, 11 Dec 2018 03:13:39 +0000 (11:13 +0800)]
ieee802154: ca8210: fix possible u8 overflow in ca8210_rx_done
[ Upstream commit
8e41cae64b08fe2e86a9ffb88b295c6b4b3a3322 ]
gcc warning this:
drivers/net/ieee802154/ca8210.c:730:10: warning:
comparison is always false due to limited range of data type [-Wtype-limits]
'len' is u8 type, we get it from buf[1] adding 2, which can overflow.
This patch change the type of 'len' to unsigned int to avoid this,also fix
the gcc warning.
Fixes:
ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Falcon [Mon, 10 Dec 2018 21:22:23 +0000 (15:22 -0600)]
ibmvnic: Fix non-atomic memory allocation in IRQ context
[ Upstream commit
1d1bbc37f89b0559c9e913682f2489d89cfde6b8 ]
ibmvnic_reset allocated new reset work item objects in a non-atomic
context. This can be called from a tasklet, generating the output below.
Allocate work items with the GFP_ATOMIC flag instead.
BUG: sleeping function called from invalid context at mm/slab.h:421
in_atomic(): 1, irqs_disabled(): 1, pid: 93, name: kworker/0:2
INFO: lockdep is turned off.
irq event stamp: 66049
hardirqs last enabled at (66048): [<
c000000000122468>] tasklet_action_common.isra.12+0x78/0x1c0
hardirqs last disabled at (66049): [<
c000000000befce8>] _raw_spin_lock_irqsave+0x48/0xf0
softirqs last enabled at (66044): [<
c000000000a8ac78>] dev_deactivate_queue.constprop.28+0xc8/0x160
softirqs last disabled at (66045): [<
c0000000000306e0>] call_do_softirq+0x14/0x24
CPU: 0 PID: 93 Comm: kworker/0:2 Kdump: loaded Not tainted 4.20.0-rc6-00001-g1b50a8f03706 #7
Workqueue: events linkwatch_event
Call Trace:
[
c0000003fffe7ae0] [
c000000000bc83e4] dump_stack+0xe8/0x164 (unreliable)
[
c0000003fffe7b30] [
c00000000015ba0c] ___might_sleep+0x2dc/0x320
[
c0000003fffe7bb0] [
c000000000391514] kmem_cache_alloc_trace+0x3e4/0x440
[
c0000003fffe7c30] [
d000000005b2309c] ibmvnic_reset+0x16c/0x360 [ibmvnic]
[
c0000003fffe7cc0] [
d000000005b29834] ibmvnic_tasklet+0x1054/0x2010 [ibmvnic]
[
c0000003fffe7e00] [
c0000000001224c8] tasklet_action_common.isra.12+0xd8/0x1c0
[
c0000003fffe7e60] [
c000000000bf1238] __do_softirq+0x1a8/0x64c
[
c0000003fffe7f90] [
c0000000000306e0] call_do_softirq+0x14/0x24
[
c0000003f3967980] [
c00000000001ba50] do_softirq_own_stack+0x60/0xb0
[
c0000003f39679c0] [
c0000000001218a8] do_softirq+0xa8/0x100
[
c0000003f39679f0] [
c000000000121a74] __local_bh_enable_ip+0x174/0x180
[
c0000003f3967a60] [
c000000000bf003c] _raw_spin_unlock_bh+0x5c/0x80
[
c0000003f3967a90] [
c000000000a8ac78] dev_deactivate_queue.constprop.28+0xc8/0x160
[
c0000003f3967ad0] [
c000000000a8c8b0] dev_deactivate_many+0xd0/0x520
[
c0000003f3967b70] [
c000000000a8cd40] dev_deactivate+0x40/0x60
[
c0000003f3967ba0] [
c000000000a5e0c4] linkwatch_do_dev+0x74/0xd0
[
c0000003f3967bd0] [
c000000000a5e694] __linkwatch_run_queue+0x1a4/0x1f0
[
c0000003f3967c30] [
c000000000a5e728] linkwatch_event+0x48/0x60
[
c0000003f3967c50] [
c0000000001444e8] process_one_work+0x238/0x710
[
c0000003f3967d20] [
c000000000144a48] worker_thread+0x88/0x4e0
[
c0000003f3967db0] [
c00000000014e3a8] kthread+0x178/0x1c0
[
c0000003f3967e20] [
c00000000000bfd0] ret_from_kernel_thread+0x5c/0x6c
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Falcon [Mon, 10 Dec 2018 21:22:22 +0000 (15:22 -0600)]
ibmvnic: Convert reset work item mutex to spin lock
[ Upstream commit
6c5c7489089608d89b7ce310bca44812e2b0a4a5 ]
ibmvnic_reset can create and schedule a reset work item from
an IRQ context, so do not use a mutex, which can sleep. Convert
the reset work item mutex to a spin lock. Locking debugger generated
the trace output below.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
in_atomic(): 1, irqs_disabled(): 1, pid: 120, name: kworker/8:1
4 locks held by kworker/8:1/120:
#0:
0000000017c05720 ((wq_completion)"events"){+.+.}, at: process_one_work+0x188/0x710
#1:
00000000ace90706 ((linkwatch_work).work){+.+.}, at: process_one_work+0x188/0x710
#2:
000000007632871f (rtnl_mutex){+.+.}, at: rtnl_lock+0x30/0x50
#3:
00000000fc36813a (&(&crq->lock)->rlock){..-.}, at: ibmvnic_tasklet+0x88/0x2010 [ibmvnic]
irq event stamp: 26293
hardirqs last enabled at (26292): [<
c000000000122468>] tasklet_action_common.isra.12+0x78/0x1c0
hardirqs last disabled at (26293): [<
c000000000befce8>] _raw_spin_lock_irqsave+0x48/0xf0
softirqs last enabled at (26288): [<
c000000000a8ac78>] dev_deactivate_queue.constprop.28+0xc8/0x160
softirqs last disabled at (26289): [<
c0000000000306e0>] call_do_softirq+0x14/0x24
CPU: 8 PID: 120 Comm: kworker/8:1 Kdump: loaded Not tainted 4.20.0-rc6 #6
Workqueue: events linkwatch_event
Call Trace:
[
c0000003fffa7a50] [
c000000000bc83e4] dump_stack+0xe8/0x164 (unreliable)
[
c0000003fffa7aa0] [
c00000000015ba0c] ___might_sleep+0x2dc/0x320
[
c0000003fffa7b20] [
c000000000be960c] __mutex_lock+0x8c/0xb40
[
c0000003fffa7c30] [
d000000006202ac8] ibmvnic_reset+0x78/0x330 [ibmvnic]
[
c0000003fffa7cc0] [
d0000000062097f4] ibmvnic_tasklet+0x1054/0x2010 [ibmvnic]
[
c0000003fffa7e00] [
c0000000001224c8] tasklet_action_common.isra.12+0xd8/0x1c0
[
c0000003fffa7e60] [
c000000000bf1238] __do_softirq+0x1a8/0x64c
[
c0000003fffa7f90] [
c0000000000306e0] call_do_softirq+0x14/0x24
[
c0000003f3f87980] [
c00000000001ba50] do_softirq_own_stack+0x60/0xb0
[
c0000003f3f879c0] [
c0000000001218a8] do_softirq+0xa8/0x100
[
c0000003f3f879f0] [
c000000000121a74] __local_bh_enable_ip+0x174/0x180
[
c0000003f3f87a60] [
c000000000bf003c] _raw_spin_unlock_bh+0x5c/0x80
[
c0000003f3f87a90] [
c000000000a8ac78] dev_deactivate_queue.constprop.28+0xc8/0x160
[
c0000003f3f87ad0] [
c000000000a8c8b0] dev_deactivate_many+0xd0/0x520
[
c0000003f3f87b70] [
c000000000a8cd40] dev_deactivate+0x40/0x60
[
c0000003f3f87ba0] [
c000000000a5e0c4] linkwatch_do_dev+0x74/0xd0
[
c0000003f3f87bd0] [
c000000000a5e694] __linkwatch_run_queue+0x1a4/0x1f0
[
c0000003f3f87c30] [
c000000000a5e728] linkwatch_event+0x48/0x60
[
c0000003f3f87c50] [
c0000000001444e8] process_one_work+0x238/0x710
[
c0000003f3f87d20] [
c000000000144a48] worker_thread+0x88/0x4e0
[
c0000003f3f87db0] [
c00000000014e3a8] kthread+0x178/0x1c0
[
c0000003f3f87e20] [
c00000000000bfd0] ret_from_kernel_thread+0x5c/0x6c
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yussuf Khalil [Sun, 9 Dec 2018 04:13:35 +0000 (20:13 -0800)]
Input: synaptics - enable RMI on ThinkPad T560
[ Upstream commit
ca5047286c9c93a01e1f471d00a6019536992954 ]
Before commit
7fd6d98b89f3 ("i2c: i801: Allow ACPI AML access I/O
ports not reserved for SMBus"), enabling RMI on the T560 would cause
the touchpad to stop working after resuming from suspend. Now that
this issue is fixed, RMI can be enabled safely and works fine.
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Yussuf Khalil <dev@pp3345.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Tue, 4 Dec 2018 21:52:49 +0000 (13:52 -0800)]
Input: omap-keypad - fix idle configuration to not block SoC idle states
[ Upstream commit
e2ca26ec4f01486661b55b03597c13e2b9c18b73 ]
With PM enabled, I noticed that pressing a key on the droid4 keyboard will
block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT
and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as
suggested by Dmitry Torokhov <dmitry.torokhov@gmail.com>.
From the hardware point of view, looks like we need to manage the registers
for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid
blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE
register now gone with IRQF_ONESHOT, also the SoC idle state problem is
gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in
omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent
blocking deeper SoC idle states after rmmod omap4-keypad.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Thu, 1 Nov 2018 05:25:30 +0000 (08:25 +0300)]
scsi: bnx2fc: Fix NULL dereference in error handling
[ Upstream commit
9ae4f8420ed7be4b13c96600e3568c144d101a23 ]
If "interface" is NULL then we can't release it and trying to will only
lead to an Oops.
Fixes:
aea71a024914 ("[SCSI] bnx2fc: Introduce interface structure for each vlan interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Himanshu Madhani [Fri, 7 Dec 2018 05:49:42 +0000 (21:49 -0800)]
Revert "scsi: qla2xxx: Fix NVMe Target discovery"
[ Upstream commit
c64a87f9518409d0a439895f09f6149ffdd427b8 ]
This reverts commit
db186382af21e926e90df19499475f2552192b77.
This commit introduced regression with FCP discovery so revert it to fix
discovery for FCP luns.
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Wed, 5 Dec 2018 13:12:19 +0000 (14:12 +0100)]
netfilter: seqadj: re-load tcp header pointer after possible head reallocation
[ Upstream commit
530aad77010b81526586dfc09130ec875cd084e4 ]
When adjusting sack block sequence numbers, skb_make_writable() gets
called to make sure tcp options are all in the linear area, and buffer
is not shared.
This can cause tcp header pointer to get reallocated, so we must
reaload it to avoid memory corruption.
This bug pre-dates git history.
Reported-by: Neel Mehta <nmehta@google.com>
Reported-by: Shane Huntley <shuntley@google.com>
Reported-by: Heather Adkins <argv@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Taehee Yoo [Mon, 26 Nov 2018 11:03:30 +0000 (20:03 +0900)]
netfilter: nf_tables: fix suspicious RCU usage in nft_chain_stats_replace()
[ Upstream commit
4c05ec47384ab3627b62814e8f886e90cc38ce15 ]
basechain->stats is rcu protected data which is updated from
nft_chain_stats_replace(). This function is executed from the commit
phase which holds the pernet nf_tables commit mutex - not the global
nfnetlink subsystem mutex.
Test commands to reproduce the problem are:
%iptables-nft -I INPUT
%iptables-nft -Z
%iptables-nft -Z
This patch uses RCU calls to handle basechain->stats updates to fix a
splat that looks like:
[89279.358755] =============================
[89279.363656] WARNING: suspicious RCU usage
[89279.368458] 4.20.0-rc2+ #44 Tainted: G W L
[89279.374661] -----------------------------
[89279.379542] net/netfilter/nf_tables_api.c:1404 suspicious rcu_dereference_protected() usage!
[...]
[89279.406556] 1 lock held by iptables-nft/5225:
[89279.411728] #0:
00000000bf45a000 (&net->nft.commit_mutex){+.+.}, at: nf_tables_valid_genid+0x1f/0x70 [nf_tables]
[89279.424022] stack backtrace:
[89279.429236] CPU: 0 PID: 5225 Comm: iptables-nft Tainted: G W L 4.20.0-rc2+ #44
[89279.430135] Call Trace:
[89279.430135] dump_stack+0xc9/0x16b
[89279.430135] ? show_regs_print_info+0x5/0x5
[89279.430135] ? lockdep_rcu_suspicious+0x117/0x160
[89279.430135] nft_chain_commit_update+0x4ea/0x640 [nf_tables]
[89279.430135] ? sched_clock_local+0xd4/0x140
[89279.430135] ? check_flags.part.35+0x440/0x440
[89279.430135] ? __rhashtable_remove_fast.constprop.67+0xec0/0xec0 [nf_tables]
[89279.430135] ? sched_clock_cpu+0x126/0x170
[89279.430135] ? find_held_lock+0x39/0x1c0
[89279.430135] ? hlock_class+0x140/0x140
[89279.430135] ? is_bpf_text_address+0x5/0xf0
[89279.430135] ? check_flags.part.35+0x440/0x440
[89279.430135] ? __lock_is_held+0xb4/0x140
[89279.430135] nf_tables_commit+0x2555/0x39c0 [nf_tables]
Fixes:
f102d66b335a4 ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Aring [Thu, 29 Nov 2018 22:41:54 +0000 (17:41 -0500)]
ieee802154: hwsim: fix off-by-one in parse nested
[ Upstream commit
a73d4e1490913b76b292f91553b7ba08a65caa3f ]
This patch fixes a off-by-one mistake in nla_parse_nested() functions of
mac802154_hwsim driver. I had to enabled stack protector so I was able
to reproduce it.
Reference: https://github.com/linux-wpan/wpan-tools/issues/17
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steffen Klassert [Thu, 22 Nov 2018 06:26:24 +0000 (07:26 +0100)]
xfrm: Fix NULL pointer dereference in xfrm_input when skb_dst_force clears the dst_entry.
[ Upstream commit
0152eee6fc3b84298bb6a79961961734e8afa5b8 ]
Since commit
222d7dbd258d ("net: prevent dst uses after free")
skb_dst_force() might clear the dst_entry attached to the skb.
The xfrm code doesn't expect this to happen, so we crash with
a NULL pointer dereference in this case.
Fix it by checking skb_dst(skb) for NULL after skb_dst_force()
and drop the packet in case the dst_entry was cleared. We also
move the skb_dst_force() to a codepath that is not used when
the transformation was offloaded, because in this case we
don't have a dst_entry attached to the skb.
The output and forwarding path was already fixed by
commit
9e1437937807 ("xfrm: Fix NULL pointer dereference when
skb_dst_force clears the dst_entry.")
Fixes:
222d7dbd258d ("net: prevent dst uses after free")
Reported-by: Jean-Philippe Menil <jpmenil@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Poirier [Mon, 5 Nov 2018 08:00:53 +0000 (17:00 +0900)]
xfrm: Fix bucket count reported to userspace
[ Upstream commit
ca92e173ab34a4f7fc4128bd372bd96f1af6f507 ]
sadhcnt is reported by `ip -s xfrm state count` as "buckets count", not the
hash mask.
Fixes:
28d8909bc790 ("[XFRM]: Export SAD info.")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Sat, 27 Oct 2018 06:12:06 +0000 (06:12 +0000)]
xfrm: Fix error return code in xfrm_output_one()
[ Upstream commit
533555e5cbb6aa2d77598917871ae5b579fe724b ]
xfrm_output_one() does not return a error code when there is
no dst_entry attached to the skb, it is still possible crash
with a NULL pointer dereference in xfrm_output_resume(). Fix
it by return error code -EHOSTUNREACH.
Fixes:
9e1437937807 ("xfrm: Fix NULL pointer dereference when skb_dst_force clears the dst_entry.")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Fri, 14 Dec 2018 22:17:20 +0000 (14:17 -0800)]
checkstack.pl: fix for aarch64
[ Upstream commit
f1733a1d3cd32a9492f4cf866be37bb46e10163d ]
There is actually a space after "sp," like this,
ffff2000080813c8:
a9bb7bfd stp x29, x30, [sp, #-80]!
Right now, checkstack.pl isn't able to print anything on aarch64,
because it won't be able to match the stating objdump line of a function
due to this missing space. Hence, it displays every stack as zero-size.
After this patch, checkpatch.pl is able to match the start of a
function's objdump, and is then able to calculate each function's stack
correctly.
Link: http://lkml.kernel.org/r/20181207195843.38528-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Zhang [Wed, 5 Dec 2018 13:50:49 +0000 (15:50 +0200)]
IB/core: Fix oops in netdev_next_upper_dev_rcu()
[ Upstream commit
37fbd834b4e492dc41743830cbe435f35120abd8 ]
When support for bonding of RoCE devices was added, there was
necessarily a link between the RoCE device and the paired netdevice that
was part of the bond. If you remove the mlx4_en module, that paired
association is broken (the RoCE device is still present but the paired
netdevice has been released). We need to account for this in
is_upper_ndev_bond_master_filter() and filter out those links with a
broken pairing or else we later oops in netdev_next_upper_dev_rcu().
Fixes:
408f1242d940 ("IB/core: Delete lower netdevice default GID entries in bonding scenario")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrey Grodzovsky [Thu, 6 Dec 2018 20:51:37 +0000 (15:51 -0500)]
drm/amdgpu: Fix DEBUG_LOCKS_WARN_ON(depth <= 0) in amdgpu_ctx.lock
[ Upstream commit
c554206077428af56cc2e0314b86b41cd030458c ]
If CS is submitted using guilty ctx, we terminate amdgpu_cs_parser_init
before locking ctx->lock, latter in amdgpu_cs_parser_fini we still are
trying to release the lock just becase parser->ctx != NULL.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oliver O'Halloran [Thu, 6 Dec 2018 15:17:14 +0000 (02:17 +1100)]
powerpc/mm: Fallback to RAM if the altmap is unusable
[ Upstream commit
9ef34630a4614ee1cd478f9859ebea55d55f10ec ]
The "altmap" is used to provide a pool of memory that is reserved for
the vmemmap backing of hot-plugged memory. This is useful when adding
large amount of ZONE_DEVICE memory to a system with a limited amount of
normal memory.
On ppc64 we use huge pages to map the vmemmap which requires the backing
storage to be contigious and aligned to the hugepage size. The altmap
implementation allows for the altmap provider to reserve a few PFNs at
the start of the range for it's own uses and when this occurs the
first chunk of the altmap is not usable for hugepage mappings. On hash
there is no sane way to fall back to a normal sized page mapping so we
fail the allocation. This results in memory hotplug failing with
ENOMEM when the new range doesn't fall into an existing vmemmap block.
This patch handles this case by falling back to using system memory
rather than failing if we cannot allocate from the altmap. This
fallback should only ever be used for the first vmemmap block so it
should not cause excess memory consumption.
Fixes:
7b73d978a5d0 ("mm: pass the vmem_altmap to vmemmap_populate")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Hutterer [Wed, 5 Dec 2018 23:03:36 +0000 (09:03 +1000)]
Input: restore EV_ABS ABS_RESERVED
[ Upstream commit
c201e3808e0e4be9b98d192802085a9f491bd80c ]
ABS_RESERVED was added in
d9ca1c990a7 and accidentally removed as part of
ffe0e7cf290f5c9 when the high-resolution scrolling code was removed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yishai Hadas [Wed, 5 Dec 2018 13:50:21 +0000 (15:50 +0200)]
IB/mlx5: Block DEVX umem from the non applicable cases
[ Upstream commit
47f07f03b5ee436fe074c4fb1fb28d013c36a0d8 ]
Blocks creating a DEVX UMEM with the non applicable access flags
as of ODP, MW_BIND, etc.
Specifically when an ODP flag is used below WARN call trace is issued.
[ 2510.404131] RIP: 0010:__mlx5_ib_populate_pas+0x207/0x220 [mlx5_ib]
...
[ 2510.404143] Call Trace:
[ 2510.404150] ? __kmalloc_node+0x1b3/0x280
[ 2510.404156] ? _uverbs_alloc+0x63/0x90 [ib_uverbs]
[ 2510.404158] ? _uverbs_alloc+0x63/0x90 [ib_uverbs]
[ 2510.404162] mlx5_ib_populate_pas+0x53/0x60 [mlx5_ib]
[ 2510.404167] mlx5_ib_handler_MLX5_IB_METHOD_DEVX_UMEM_REG+0x273/0x3f0 [mlx5_ib]
Fixes:
aeae94579caf ("IB/mlx5: Add DEVX support for memory registration")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Wed, 5 Dec 2018 11:05:30 +0000 (09:05 -0200)]
ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
[ Upstream commit
f15096f12a4e9340168df5fdd9201aa8ed60d59e ]
According to bindings/regulator/fixed-regulator.txt the 'clocks' and
'clock-names' properties are not valid ones.
In order to turn on the Wifi clock the correct location for describing
the CLKO2 clock is via a mmc-pwrseq handle, so do it accordingly.
Fixes:
56354959cfec ("ARM: dts: imx: add Boundary Devices Nitrogen7 board")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anson Huang [Tue, 4 Dec 2018 03:17:45 +0000 (03:17 +0000)]
ARM: imx: update the cpu power up timing setting on i.mx6sx
[ Upstream commit
1e434b703248580b7aaaf8a115d93e682f57d29f ]
The sw2iso count should cover ARM LDO ramp-up time,
the MAX ARM LDO ramp-up time may be up to more than
100us on some boards, this patch sets sw2iso to 0xf
(~384us) which is the reset value, and it is much
more safe to cover different boards, since we have
observed that some customer boards failed with current
setting of 0x2.
Fixes:
05136f0897b5 ("ARM: imx: support arm power off in cpuidle for i.mx6sx")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Fri, 30 Nov 2018 10:31:29 +0000 (08:31 -0200)]
ARM: dts: imx7d-pico: Describe the Wifi clock
[ Upstream commit
c3b9ab5db11d8098ca7674175f12ab21cdce1bbb ]
The Wifi chip should be clocked by a 32kHz clock coming from i.MX7D
CLKO2 output pin, so describe the pinmux and clock hierarchy in the
device tree to allow the Wifi chip to be properly clocked.
Managed to successfully test Wifi with such change. Used the standard
nvram.txt file provided by TechNexion, which selects an external 32kHz
clock for the Wifi chip by default.
Fixes:
99a52450c707 ("ARM: dts: imx7d-pico: Add Wifi support")
Suggested-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Tested-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Mon, 26 Nov 2018 10:52:18 +0000 (11:52 +0100)]
HID: ite: Add USB id match for another ITE based keyboard rfkill key quirk
[ Upstream commit
4050207485e47e00353e87f2fe2166083e282688 ]
The 258a:6a88 keyboard-dock shipped with the Prowise PT301 tablet is
likely another ITE based design. The controller die is directly bonded
to the PCB with a blob of black glue on top so there are no markings and
the 258a vendor-id used is unknown anywhere. But the keyboard has the
exact same hotkeys mapped to Fn+F1 - F10 as the other ITE8595 keyboard
I have *and* it has the same quirky behavior wrt the rfkill hotkey.
Either way as said this keyboard has the same quirk for its rfkill /
airplane mode hotkey as the ITE 8595 chip, it only sends a single release
event when pressed and released, it never sends a press event.
This commit adds the 258a:6a88 USB id to the hid-ite id-table, fixing
the rfkill key not working on this keyboard.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Mon, 26 Nov 2018 01:59:16 +0000 (12:59 +1100)]
powerpc/mm: Fix linux page tables build with some configs
[ Upstream commit
462951cd32e1496dc64b00051dfb777efc8ae5d8 ]
For some configs the build fails with:
arch/powerpc/mm/dump_linuxpagetables.c: In function 'populate_markers':
arch/powerpc/mm/dump_linuxpagetables.c:306:39: error: 'PKMAP_BASE' undeclared (first use in this function)
arch/powerpc/mm/dump_linuxpagetables.c:314:50: error: 'LAST_PKMAP' undeclared (first use in this function)
These come from highmem.h, including that fixes the build.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Mackerras [Mon, 26 Nov 2018 22:01:54 +0000 (09:01 +1100)]
powerpc: Fix COFF zImage booting on old powermacs
[ Upstream commit
5564597d51c8ff5b88d95c76255e18b13b760879 ]
Commit
6975a783d7b4 ("powerpc/boot: Allow building the zImage wrapper
as a relocatable ET_DYN", 2011-04-12) changed the procedure descriptor
at the start of crt0.S to have a hard-coded start address of 0x500000
rather than a reference to _zimage_start, presumably because having
a reference to a symbol introduced a relocation which is awkward to
handle in a position-independent executable. Unfortunately, what is
at 0x500000 in the COFF image is not the first instruction, but the
procedure descriptor itself, that is, a word containing 0x500000,
which is not a valid instruction. Hence, booting a COFF zImage
results in a "DEFAULT CATCH!, code=
FFF00700" message from Open
Firmware.
This fixes the problem by (a) putting the procedure descriptor in the
data section and (b) adding a branch to _zimage_start as the first
instruction in the program.
Fixes:
6975a783d7b4 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ryder Lee [Mon, 12 Nov 2018 01:28:06 +0000 (09:28 +0800)]
arm64: dts: mt7622: fix no more console output on rfb1
[ Upstream commit
6c05946e349d92f527d98644fbc9c41f06312c00 ]
No default serial console on boot.
Fix this by using a 'stdout-path' property that points to the device.
Fixes:
c0d9f9ad4f76 ("arm64: dts: mt7622: add earlycon to mt7622-rfb1 board")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[mb: Fix commit message]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jerome Brunet [Tue, 13 Nov 2018 10:55:36 +0000 (11:55 +0100)]
pinctrl: meson: fix pull enable register calculation
[ Upstream commit
614b1868a125a0ba24be08f3a7fa832ddcde6bca ]
We just changed the code so we apply bias disable on the correct
register but forgot to align the register calculation. The result
is that we apply the change on the correct register, but possibly
at the incorrect offset/bit
This went undetected because offsets tends to be the same between
REG_PULL and REG_PULLEN for a given pin the EE controller. This
is not true for the AO controller.
Fixes:
e39f9dd8206a ("pinctrl: meson: fix pinconf bias disable")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Mon, 9 Jul 2018 19:51:54 +0000 (19:51 +0000)]
ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V
[ Upstream commit
5f8208f557065163f9a8089ea2ea7888f9d96922 ]
Since commit
d7c5f6863550 ("ARM: dts: sun8i: a83t: bananapi-m3: Add
AXP813 regulator nodes") my BPIM3 no longer works at gigabit speed.
With the default setting, dldo3 is regulated at 2.9v which seems
sufficient for the PHY but the aforementioned commit drops it to 2.5V
which is insufficient. Note that this behaviour is random for all BPIM3.
Some work with 2.5V, but some don't.
Finnaly, someone from Bananapi confirmed that this regulator must be set
to 3.3V.
Fixes:
d7c5f6863550 ("ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813
regulator nodes")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
[wens@csie.org: Reworked commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Wed, 9 Jan 2019 16:38:50 +0000 (17:38 +0100)]
Linux 4.19.14
Paul Burton [Thu, 22 Nov 2018 03:47:57 +0000 (19:47 -0800)]
MIPS: Only include mmzone.h when CONFIG_NEED_MULTIPLE_NODES=y
commit
66a4059ba72c23ae74a7c702894ff76c4b7eac1f upstream.
MIPS' asm/mmzone.h includes the machine/platform mmzone.h
unconditionally, but since commit
bb53fdf395ee ("MIPS: c-r4k: Add
r4k_blast_scache_node for Loongson-3") is included by asm/rk4cache.h for
all r4k-style configs regardless of CONFIG_NEED_MULTIPLE_NODES.
This is problematic when CONFIG_NEED_MULTIPLE_NODES=n because both the
loongson3 & ip27 mmzone.h headers unconditionally define the NODE_DATA
preprocessor macro which is aready defined by linux/mmzone.h, resulting
in the following build error:
In file included from ./arch/mips/include/asm/mmzone.h:10,
from ./arch/mips/include/asm/r4kcache.h:23,
from arch/mips/mm/c-r4k.c:33:
./arch/mips/include/asm/mach-loongson64/mmzone.h:48: error: "NODE_DATA" redefined [-Werror]
#define NODE_DATA(n) (&__node_data[(n)]->pglist)
In file included from ./include/linux/topology.h:32,
from ./include/linux/irq.h:19,
from ./include/asm-generic/hardirq.h:13,
from ./arch/mips/include/asm/hardirq.h:16,
from ./include/linux/hardirq.h:9,
from arch/mips/mm/c-r4k.c:11:
./include/linux/mmzone.h:907: note: this is the location of the previous definition
#define NODE_DATA(nid) (&contig_page_data)
Resolve this by only including the machine mmzone.h when
CONFIG_NEED_MULTIPLE_NODES=y, which also removes the need for the empty
mach-generic version of the header which we delete.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes:
bb53fdf395ee ("MIPS: c-r4k: Add r4k_blast_scache_node for Loongson-3")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Wunner [Thu, 29 Nov 2018 14:14:49 +0000 (15:14 +0100)]
spi: bcm2835: Unbreak the build of esoteric configs
commit
29bdedfd9cf40e59456110ca417a8cb672ac9b92 upstream.
Commit
e82b0b382845 ("spi: bcm2835: Fix race on DMA termination") broke
the build with COMPILE_TEST=y on arches whose cmpxchg() requires 32-bit
operands (xtensa, older arm ISAs).
Fix by changing the dma_pending flag's type from bool to unsigned int.
Fixes:
e82b0b382845 ("spi: bcm2835: Fix race on DMA termination")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Martin Sperl <kernel@martin.sperl.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Winkler [Fri, 19 Oct 2018 18:22:47 +0000 (21:22 +0300)]
tpm: tpm_i2c_nuvoton: use correct command duration for TPM 2.x
commit
2ba5780ce30549cf57929b01d8cba6fe656e31c5 upstream.
tpm_i2c_nuvoton calculated commands duration using TPM 1.x
values via tpm_calc_ordinal_duration() also for TPM 2.x chips.
Call tpm2_calc_ordinal_duration() for retrieving ordinal
duration for TPM 2.X chips.
Cc: stable@vger.kernel.org
Cc: Nayna Jain <nayna@linux.vnet.ibm.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com> (For TPM 2.0)
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Winkler [Tue, 16 Oct 2018 13:37:16 +0000 (16:37 +0300)]
tpm: tpm_try_transmit() refactor error flow.
commit
01f54664a4db0d612de0ece8e0022f21f9374e9b upstream.
First, rename out_no_locality to out_locality for bailing out on
both tpm_cmd_ready() and tpm_request_locality() failure.
Second, ignore the return value of go_to_idle() as it may override
the return value of the actual tpm operation, the go_to_idle() error
will be caught on any consequent command.
Last, fix the wrong 'goto out', that jumped back instead of forward.
Cc: stable@vger.kernel.org
Fixes:
627448e85c76 ("tpm: separate cmd_ready/go_idle from runtime_pm")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 3 Jan 2019 17:45:07 +0000 (17:45 +0000)]
arm64: compat: Avoid sending SIGILL for unallocated syscall numbers
commit
169113ece0f29ebe884a6cfcf57c1ace04d8a36a upstream.
The ARM Linux kernel handles the EABI syscall numbers as follows:
0 - NR_SYSCALLS-1 : Invoke syscall via syscall table
NR_SYSCALLS - 0xeffff : -ENOSYS (to be allocated in future)
0xf0000 - 0xf07ff : Private syscall or -ENOSYS if not allocated
> 0xf07ff : SIGILL
Our compat code gets this wrong and ends up sending SIGILL in response
to all syscalls greater than NR_SYSCALLS which have a value greater
than 0x7ff in the bottom 16 bits.
Fix this by defining the end of the ARM private syscall region and
checking the syscall number against that directly. Update the comment
while we're at it.
Cc: <stable@vger.kernel.org>
Cc: Dave Martin <Dave.Martin@arm.com>
Reported-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robin Murphy [Wed, 17 Oct 2018 20:32:58 +0000 (21:32 +0100)]
iommu/arm-smmu-v3: Fix big-endian CMD_SYNC writes
commit
3cd508a8c1379427afb5e16c2e0a7c986d907853 upstream.
When we insert the sync sequence number into the CMD_SYNC.MSIData field,
we do so in CPU-native byte order, before writing out the whole command
as explicitly little-endian dwords. Thus on big-endian systems, the SMMU
will receive and write back a byteswapped version of sync_nr, which would
be perfect if it were targeting a similarly-little-endian ITS, but since
it's actually writing back to memory being polled by the CPUs, they're
going to end up seeing the wrong thing.
Since the SMMU doesn't care what the MSIData actually contains, the
minimal-overhead solution is to simply add an extra byteswap initially,
such that it then writes back the big-endian format directly.
Cc: <stable@vger.kernel.org>
Fixes:
37de98f8f1cf ("iommu/arm-smmu-v3: Use CMD_SYNC completion MSI")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Wed, 12 Dec 2018 20:11:23 +0000 (14:11 -0600)]
KVM: arm/arm64: vgic: Fix off-by-one bug in vgic_get_irq()
commit
c23b2e6fc4ca346018618266bcabd335c0a8a49e upstream.
When using the nospec API, it should be taken into account that:
"...if the CPU speculates past the bounds check then
* array_index_nospec() will clamp the index within the range of [0,
* size)."
The above is part of the header for macro array_index_nospec() in
linux/nospec.h
Now, in this particular case, if intid evaluates to exactly VGIC_MAX_SPI
or to exaclty VGIC_MAX_PRIVATE, the array_index_nospec() macro ends up
returning VGIC_MAX_SPI - 1 or VGIC_MAX_PRIVATE - 1 respectively, instead
of VGIC_MAX_SPI or VGIC_MAX_PRIVATE, which, based on the original logic:
/* SGIs and PPIs */
if (intid <= VGIC_MAX_PRIVATE)
return &vcpu->arch.vgic_cpu.private_irqs[intid];
/* SPIs */
if (intid <= VGIC_MAX_SPI)
return &kvm->arch.vgic.spis[intid - VGIC_NR_PRIVATE_IRQS];
are valid values for intid.
Fix this by calling array_index_nospec() macro with VGIC_MAX_PRIVATE + 1
and VGIC_MAX_SPI + 1 as arguments for its parameter size.
Fixes:
41b87599c743 ("KVM: arm/arm64: vgic: fix possible spectre-v1 in vgic_get_irq()")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
[dropped the SPI part which was fixed separately]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoffer Dall [Tue, 11 Dec 2018 11:51:03 +0000 (12:51 +0100)]
KVM: arm/arm64: vgic-v2: Set active_source to 0 when restoring state
commit
60c3ab30d8c2ff3a52606df03f05af2aae07dc6b upstream.
When restoring the active state from userspace, we don't know which CPU
was the source for the active state, and this is not architecturally
exposed in any of the register state.
Set the active_source to 0 in this case. In the future, we can expand
on this and exposse the information as additional information to
userspace for GICv2 if anyone cares.
Cc: stable@vger.kernel.org
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Tue, 4 Dec 2018 17:11:19 +0000 (17:11 +0000)]
KVM: arm/arm64: vgic: Cap SPIs to the VM-defined maximum
commit
bea2ef803ade3359026d5d357348842bca9edcf1 upstream.
SPIs should be checked against the VMs specific configuration, and
not the architectural maximum.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julien Thierry [Mon, 26 Nov 2018 18:26:44 +0000 (18:26 +0000)]
KVM: arm/arm64: vgic: Do not cond_resched_lock() with IRQs disabled
commit
2e2f6c3c0b08eed3fcf7de3c7684c940451bdeb1 upstream.
To change the active state of an MMIO, halt is requested for all vcpus of
the affected guest before modifying the IRQ state. This is done by calling
cond_resched_lock() in vgic_mmio_change_active(). However interrupts are
disabled at this point and we cannot reschedule a vcpu.
We actually don't need any of this, as kvm_arm_halt_guest ensures that
all the other vcpus are out of the guest. Let's just drop that useless
code.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Suggested-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Wed, 7 Nov 2018 02:39:13 +0000 (02:39 +0000)]
rtc: m41t80: Correct alarm month range with RTC reads
commit
3cc9ffbb1f51eb4320575a48e4805a8f52e0e26b upstream.
Add the missing adjustment of the month range on alarm reads from the
RTC, correcting an issue coming from commit
9c6dfed92c3e ("rtc: m41t80:
add alarm functionality"). The range is 1-12 for hardware and 0-11 for
`struct rtc_time', and is already correctly handled on alarm writes to
the RTC.
It was correct up until commit
48e9766726eb ("drivers/rtc/rtc-m41t80.c:
remove disabled alarm functionality") too, which removed the previous
implementation of alarm support.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Fixes:
9c6dfed92c3e ("rtc: m41t80: add alarm functionality")
References:
48e9766726eb ("drivers/rtc/rtc-m41t80.c: remove disabled alarm functionality")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sylwester Nawrocki [Wed, 12 Dec 2018 17:57:44 +0000 (18:57 +0100)]
ARM: dts: exynos: Specify I2S assigned clocks in proper node
commit
8ac686d7dfed721102860ff2571e6b9f529ae81a upstream.
The assigned parent clocks should be normally specified in the consumer
device's DT node, this ensures respective driver always sees correct clock
settings when required.
This patch fixes regression in audio subsystem on Odroid XU3/XU4 boards
that appeared after commits:
commit
647d04f8e07a ("ASoC: samsung: i2s: Ensure the RCLK rate is properly determined")
commit
995e73e55f46 ("ASoC: samsung: i2s: Fix rclk_srcrate handling")
commit
48279c53fd1d ("ASoC: samsung: i2s: Prevent external abort on exynos5433 I2S1 access")
Without this patch the driver gets wrong clock as the I2S function clock
(op_clk) in probe() and effectively the clock which is finally assigned
from DT is not being enabled/disabled in the runtime resume/suspend ops.
Without the above listed commits the EXYNOS_I2S_BUS clock was always set
as parent of CLK_I2S_RCLK_SRC regardless of DT settings so there was no issue
with not enabled EXYNOS_SCLK_I2S.
Cc: <stable@vger.kernel.org> # 4.17.x
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Tue, 18 Dec 2018 14:59:09 +0000 (14:59 +0000)]
arm/arm64: KVM: vgic: Force VM halt when changing the active state of GICv3 PPIs/SGIs
commit
107352a24900fb458152b92a4e72fbdc83fd5510 upstream.
We currently only halt the guest when a vCPU messes with the active
state of an SPI. This is perfectly fine for GICv2, but isn't enough
for GICv3, where all vCPUs can access the state of any other vCPU.
Let's broaden the condition to include any GICv3 interrupt that
has an active state (i.e. all but LPIs).
Cc: stable@vger.kernel.org
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 13 Dec 2018 16:06:14 +0000 (16:06 +0000)]
arm64: KVM: Avoid setting the upper 32 bits of VTCR_EL2 to 1
commit
df655b75c43fba0f2621680ab261083297fd6d16 upstream.
Although bit 31 of VTCR_EL2 is RES1, we inadvertently end up setting all
of the upper 32 bits to 1 as well because we define VTCR_EL2_RES1 as
signed, which is sign-extended when assigning to kvm->arch.vtcr.
Lucky for us, the architecture currently treats these upper bits as RES0
so, whilst we've been naughty, we haven't set fire to anything yet.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Aurich [Mon, 31 Dec 2018 22:13:34 +0000 (14:13 -0800)]
smb3: fix large reads on encrypted connections
commit
6d2f84eee098540ae857998fe32f29b9e2cd9613 upstream.
When passing a large read to receive_encrypted_read(), ensure that the
demultiplex_thread knows that a MID was processed. Without this, those
operations never complete.
This is a similar issue/fix to lease break handling:
commit
7af929d6d05ba5564139718e30d5bc96bdbc716a
("smb3: fix lease break problem introduced by compounding")
CC: Stable <stable@vger.kernel.org> # 4.19+
Fixes:
b24df3e30cbf ("cifs: update receive_encrypted_standard to handle compounded responses")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Tested-by: Yves-Alexis Perez <corsac@corsac.net>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Georgy A Bystrenin [Fri, 21 Dec 2018 06:11:42 +0000 (00:11 -0600)]
CIFS: Fix error mapping for SMB2_LOCK command which caused OFD lock problem
commit
9a596f5b39593414c0ec80f71b94a226286f084e upstream.
While resolving a bug with locks on samba shares found a strange behavior.
When a file locked by one node and we trying to lock it from another node
it fail with errno 5 (EIO) but in that case errno must be set to
(EACCES | EAGAIN).
This isn't happening when we try to lock file second time on same node.
In this case it returns EACCES as expected.
Also this issue not reproduces when we use SMB1 protocol (vers=1.0 in
mount options).
Further investigation showed that the mapping from status_to_posix_error
is different for SMB1 and SMB2+ implementations.
For SMB1 mapping is [NT_STATUS_LOCK_NOT_GRANTED to ERRlock]
(See fs/cifs/netmisc.c line 66)
but for SMB2+ mapping is [STATUS_LOCK_NOT_GRANTED to -EIO]
(see fs/cifs/smb2maperror.c line 383)
Quick changes in SMB2+ mapping from EIO to EACCES has fixed issue.
BUG: https://bugzilla.kernel.org/show_bug.cgi?id=201971
Signed-off-by: Georgy A Bystrenin <gkot@altlinux.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huacai Chen [Tue, 25 Dec 2018 00:51:01 +0000 (08:51 +0800)]
MIPS: Fix a R10000_LLSC_WAR logic in atomic.h
commit
db1ce3f5d01d2d6d5714aefba0159d2cb5167a0b upstream.
Commit
4936084c2ee2 ("MIPS: Cleanup R10000_LLSC_WAR logic in atomic.h")
introduce a mistake in atomic64_fetch_##op##_relaxed(), because it
forget to delete R10000_LLSC_WAR in the if-condition. So fix it.
Fixes:
4936084c2ee2 ("MIPS: Cleanup R10000_LLSC_WAR logic in atomic.h")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Wed, 2 Jan 2019 18:43:01 +0000 (20:43 +0200)]
MIPS: OCTEON: mark RGMII interface disabled on OCTEON III
commit
edefae94b7b9f10d5efe32dece5a36e9d9ecc29e upstream.
Commit
885872b722b7 ("MIPS: Octeon: Add Octeon III CN7xxx
interface detection") added RGMII interface detection for OCTEON III,
but it results in the following logs:
[ 7.165984] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe
[ 7.173017] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe
The current RGMII routines are valid only for older OCTEONS that
use GMX/ASX hardware blocks. On later chips AGL should be used,
but support for that is missing in the mainline. Until that is added,
mark the interface as disabled.
Fixes:
885872b722b7 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Burton [Tue, 4 Dec 2018 23:44:12 +0000 (23:44 +0000)]
MIPS: Expand MIPS32 ASIDs to 64 bits
commit
ff4dd232ec45a0e45ea69f28f069f2ab22b4908a upstream.
ASIDs have always been stored as unsigned longs, ie. 32 bits on MIPS32
kernels. This is problematic because it is feasible for the ASID version
to overflow & wrap around to zero.
We currently attempt to handle this overflow by simply setting the ASID
version to 1, using asid_first_version(), but we make no attempt to
account for the fact that there may be mm_structs with stale ASIDs that
have versions which we now reuse due to the overflow & wrap around.
Encountering this requires that:
1) A struct mm_struct X is active on CPU A using ASID (V,n).
2) That mm is not used on CPU A for the length of time that it takes
for CPU A's asid_cache to overflow & wrap around to the same
version V that the mm had in step 1. During this time tasks using
the mm could either be sleeping or only scheduled on other CPUs.
3) Some other mm Y becomes active on CPU A and is allocated the same
ASID (V,n).
4) mm X now becomes active on CPU A again, and now incorrectly has the
same ASID as mm Y.
Where struct mm_struct ASIDs are represented above in the format
(version, EntryHi.ASID), and on a typical MIPS32 system version will be
24 bits wide & EntryHi.ASID will be 8 bits wide.
The length of time required in step 2 is highly dependent upon the CPU &
workload, but for a hypothetical 2GHz CPU running a workload which
generates a new ASID every 10000 cycles this period is around 248 days.
Due to this long period of time & the fact that tasks need to be
scheduled in just the right (or wrong, depending upon your inclination)
way, this is obviously a difficult bug to encounter but it's entirely
possible as evidenced by reports.
In order to fix this, simply extend ASIDs to 64 bits even on MIPS32
builds. This will extend the period of time required for the
hypothetical system above to encounter the problem from 28 days to
around 3 trillion years, which feels safely outside of the realms of
possibility.
The cost of this is slightly more generated code in some commonly
executed paths, but this is pretty minimal:
| Code Size Gain | Percentage
-----------------------|----------------|-------------
decstation_defconfig | +270 | +0.00%
32r2el_defconfig | +652 | +0.01%
32r6el_defconfig | +1000 | +0.01%
I have been unable to measure any change in performance of the LMbench
lat_ctx or lat_proc tests resulting from the 64b ASIDs on either
32r2el_defconfig+interAptiv or 32r6el_defconfig+I6500 systems.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Suggested-by: James Hogan <jhogan@kernel.org>
References: https://lore.kernel.org/linux-mips/
80B78A8B8FEE6145A87579E8435D78C30205D5F3@fzex.ruijie.com.cn/
References: https://lore.kernel.org/linux-mips/
1488684260-18867-1-git-send-email-jiwei.sun@windriver.com/
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: Yu Huabing <yhb@ruijie.com.cn>
Cc: stable@vger.kernel.org # 2.6.12+
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huacai Chen [Thu, 15 Nov 2018 07:53:56 +0000 (15:53 +0800)]
MIPS: Align kernel load address to 64KB
commit
bec0de4cfad21bd284dbddee016ed1767a5d2823 upstream.
KEXEC needs the new kernel's load address to be aligned on a page
boundary (see sanity_check_segment_list()), but on MIPS the default
vmlinuz load address is only explicitly aligned to 16 bytes.
Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase
the alignment calculated by calc_vmlinuz_load_addr to 64KB.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21131/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: <stable@vger.kernel.org> # 2.6.36+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huacai Chen [Thu, 15 Nov 2018 07:53:54 +0000 (15:53 +0800)]
MIPS: Ensure pmd_present() returns false after pmd_mknotpresent()
commit
92aa0718c9fa5160ad2f0e7b5bffb52f1ea1e51a upstream.
This patch is borrowed from ARM64 to ensure pmd_present() returns false
after pmd_mknotpresent(). This is needed for THP.
References:
5bb1cc0ff9a6 ("arm64: Ensure pmd_present() returns false after pmd_mknotpresent()")
Reviewed-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21135/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: <stable@vger.kernel.org> # 3.8+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huacai Chen [Thu, 15 Nov 2018 07:53:53 +0000 (15:53 +0800)]
MIPS: c-r4k: Add r4k_blast_scache_node for Loongson-3
commit
bb53fdf395eed103f85061bfff3b116cee123895 upstream.
For multi-node Loongson-3 (NUMA configuration), r4k_blast_scache() can
only flush Node-0's scache. So we add r4k_blast_scache_node() by using
(CAC_BASE | (node_id << NODE_ADDRSPACE_SHIFT)) instead of CKSEG0 as the
start address.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
[paul.burton@mips.com: Include asm/mmzone.h from asm/r4kcache.h for
nid_to_addrbase(). Add asm/mach-generic/mmzone.h
to allow inclusion for all platforms.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21129/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: <stable@vger.kernel.org> # 3.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Burton [Thu, 20 Dec 2018 17:45:43 +0000 (17:45 +0000)]
MIPS: math-emu: Write-protect delay slot emulation pages
commit
adcc81f148d733b7e8e641300c5590a2cdc13bf3 upstream.
Mapping the delay slot emulation page as both writeable & executable
presents a security risk, in that if an exploit can write to & jump into
the page then it can be used as an easy way to execute arbitrary code.
Prevent this by mapping the page read-only for userland, and using
access_process_vm() with the FOLL_FORCE flag to write to it from
mips_dsemul().
This will likely be less efficient due to copy_to_user_page() performing
cache maintenance on a whole page, rather than a single line as in the
previous use of flush_cache_sigtramp(). However this delay slot
emulation code ought not to be running in any performance critical paths
anyway so this isn't really a problem, and we can probably do better in
copy_to_user_page() anyway in future.
A major advantage of this approach is that the fix is small & simple to
backport to stable kernels.
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes:
432c6bacbd0c ("MIPS: Use per-mm page to execute branch delay slot instructions")
Cc: stable@vger.kernel.org # v4.8+
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Rich Felker <dalias@libc.org>
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (VMware) [Mon, 10 Dec 2018 18:45:22 +0000 (13:45 -0500)]
tools lib traceevent: Fix processing of dereferenced args in bprintk events
commit
f024cf085c423bac7512479f45c34ee9a24af7ce upstream.
In the case that a bprintk event has a dereferenced pointer that is
stored as a string, and there's more values to process (more args), the
arg was not updated to point to the next arg after processing the
dereferenced pointer, and it screwed up what was to be displayed.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes:
37db96bb49629 ("tools lib traceevent: Handle new pointer processing of bprint strings")
Link: http://lkml.kernel.org/r/20181210134522.3f71e2ca@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Thu, 8 Nov 2018 16:12:47 +0000 (11:12 -0500)]
media: v4l2-tpg: array index could become negative
commit
e5f71a27fa12c1a1b02ad478a568e76260f1815e upstream.
text[s] is a signed char, so using that as index into the font8x16 array
can result in negative indices. Cast it to u8 to be safe.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+ccf0a61ed12f2a7313ee@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # for v4.7 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Thu, 8 Nov 2018 12:23:37 +0000 (07:23 -0500)]
media: vb2: check memory model for VIDIOC_CREATE_BUFS
commit
62dcb4f41836bd3c44b5b651bb6df07ea4cb1551 upstream.
vb2_core_create_bufs did not check if the memory model for newly added
buffers is the same as for already existing buffers. It should return an
error if they aren't the same.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+e1fb118a2ebb88031d21@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # for v4.16 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Fri, 9 Nov 2018 13:37:44 +0000 (08:37 -0500)]
media: vivid: free bitmap_cap when updating std/timings/etc.
commit
560ccb75c2caa6b1039dec1a53cd2ef526f5bf03 upstream.
When vivid_update_format_cap() is called it should free any overlay
bitmap since the compose size will change.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+0cc8e3cc63ca373722c6@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # for v3.18 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luca Ceresoli [Mon, 26 Nov 2018 16:35:07 +0000 (11:35 -0500)]
media: imx274: fix stack corruption in imx274_read_reg
commit
cea8c0077d6cf3a0cea2f18a8e914af78d46b2ff upstream.
imx274_read_reg() takes a u8 pointer ("reg") and casts it to pass it
to regmap_read(), which takes an unsigned int pointer. This results in
a corrupted stack and random crashes.
Fixes:
0985dd306f72 ("media: imx274: V4l2 driver for Sony imx274 CMOS sensor")
Cc: stable@vger.kernel.org # for 4.15 and up
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Young [Mon, 22 Oct 2018 09:01:50 +0000 (05:01 -0400)]
media: rc: cec devices do not have a lirc chardev
commit
e5bb9d3d755f128956ed467ae50b41d22bb680c6 upstream.
This fixes an oops in ir_lirc_scancode_event().
BUG: unable to handle kernel NULL pointer dereference at
0000000000000038
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 9 PID: 27687 Comm: kworker/9:2 Tainted: P OE 4.18.12-200.fc28.x86_64 #1
Hardware name: Supermicro C7X99-OCE-F/C7X99-OCE-F, BIOS 2.1a 06/15/2018
Workqueue: events pulse8_irq_work_handler [pulse8_cec]
RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0 [rc_core]
Code: 8d ae b4 07 00 00 49 81 c6 b8 07 00 00 53 e8 4a df c3 d5 48 89 ef 49 89 45 00 e8 4e 84 41 d6 49 8b 1e 49 89 c4 4c 39 f3 74 58 <8b> 43 38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49
RSP: 0018:
ffffaa10e3c07d58 EFLAGS:
00010017
RAX:
0000000000000002 RBX:
0000000000000000 RCX:
0000000000000018
RDX:
0000000000000001 RSI:
00316245397fa93c RDI:
ffff966d31c8d7b4
RBP:
ffff966d31c8d7b4 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000003 R11:
ffffaa10e3c07e28 R12:
0000000000000002
R13:
ffffaa10e3c07d88 R14:
ffff966d31c8d7b8 R15:
0000000000000073
FS:
0000000000000000(0000) GS:
ffff966d3f440000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000038 CR3:
00000009d820a003 CR4:
00000000003606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
ir_do_keydown+0x75/0x260 [rc_core]
rc_keydown+0x54/0xc0 [rc_core]
cec_received_msg_ts+0xaa8/0xaf0 [cec]
process_one_work+0x1a1/0x350
worker_thread+0x30/0x380
? pwq_unbound_release_workfn+0xd0/0xd0
kthread+0x112/0x130
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x35/0x40
Modules linked in: rc_tt_1500 dvb_usb_dvbsky dvb_usb_v2 uas usb_storage fuse vhost_net vhost tap xt_CHECKSUM iptable_mangle ip6t_REJECT nf_reject_ipv6 tun 8021q garp mrp xt_nat macvlan xfs devlink ebta
si2157 si2168 cx25840 cx23885 kvm altera_ci tda18271 joydev ir_rc6_decoder rc_rc6_mce crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore altera_stapl m88ds3103 tveeprom cx2341
mxm_wmi igb crc32c_intel megaraid_sas dca i2c_algo_bit wmi vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio i2c_dev
CR2:
0000000000000038
Cc: <stable@vger.kernel.org> # v4.16+
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Wed, 14 Nov 2018 08:37:53 +0000 (03:37 -0500)]
media: cec-pin: fix broken tx_ignore_nack_until_eom error injection
commit
ac791f19a273a7fe254a7596f193af6534582a9f upstream.
If the tx_ignore_nack_until_eom error injection was activated,
then tx_nacked was never set instead of setting it when the last
byte of the message was transmitted.
As a result the transmit was marked as OK, when it should have
been NACKed.
Modify the condition so that it always sets tx_nacked when the
last byte of the message was transmitted.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v4.17 and up
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Fri, 19 Oct 2018 07:55:34 +0000 (03:55 -0400)]
media: cec: keep track of outstanding transmits
commit
32804fcb612bf867034a093f459415e485cf044b upstream.
I noticed that repeatedly running 'cec-ctl --playback' would occasionally
select 'Playback Device 2' instead of 'Playback Device 1', even though there
were no other Playback devices in the HDMI topology. This happened both with
'real' hardware and with the vivid CEC emulation, suggesting that this was an
issue in the core code that claims a logical address.
What 'cec-ctl --playback' does is to first clear all existing logical addresses,
and immediately after that configure the new desired device type.
The core code will poll the logical addresses trying to find a free address.
When found it will issue a few standard messages as per the CEC spec and return.
Those messages are queued up and will be transmitted asynchronously.
What happens is that if you run two 'cec-ctl --playback' commands in quick
succession, there is still a message of the first cec-ctl command being transmitted
when you reconfigure the adapter again in the second cec-ctl command.
When the logical addresses are cleared, then all information about outstanding
transmits inside the CEC core is also cleared, and the core is no longer aware
that there is still a transmit in flight.
When the hardware finishes the transmit it calls transmit_done and the CEC core
thinks it is actually in response of a POLL messages that is trying to find a
free logical address. The result of all this is that the core thinks that the
logical address for Playback Device 1 is in use, when it is really an earlier
transmit that ended.
The main transmit thread looks at adap->transmitting to check if a transmit
is in progress, but that is set to NULL when the adapter is unconfigured.
adap->transmitting represents the view of userspace, not that of the hardware.
So when unconfiguring the adapter the message is marked aborted from the point
of view of userspace, but seen from the PoV of the hardware it is still ongoing.
So introduce a new bool transmit_in_progress that represents the hardware state
and use that instead of adap->transmitting. Now the CEC core waits until the
hardware finishes the transmit before starting a new transmit.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v4.18 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nava kishore Manne [Tue, 18 Dec 2018 12:18:42 +0000 (13:18 +0100)]
serial: uartps: Fix interrupt mask issue to handle the RX interrupts properly
commit
260683137ab5276113fc322fdbbc578024185fee upstream.
This patch Correct the RX interrupt mask value to handle the
RX interrupts properly.
Fixes:
c8dbdc842d30 ("serial: xuartps: Rewrite the interrupt handling logic")
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Thu, 27 Dec 2018 03:54:07 +0000 (19:54 -0800)]
f2fs: sanity check of xattr entry size
commit
64beba0558fce7b59e9a8a7afd77290e82a22163 upstream.
There is a security report where f2fs_getxattr() has a hole to expose wrong
memory region when the image is malformed like this.
f2fs_getxattr: entry->e_name_len: 4, size: 12288, buffer_size: 16384, len: 4
Cc: <stable@vger.kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Blumenstingl [Sat, 22 Dec 2018 10:22:26 +0000 (11:22 +0100)]
f2fs: fix validation of the block count in sanity_check_raw_super
commit
88960068f25fcc3759455d85460234dcc9d43fef upstream.
Treat "block_count" from struct f2fs_super_block as 64-bit little endian
value in sanity_check_raw_super() because struct f2fs_super_block
declares "block_count" as "__le64".
This fixes a bug where the superblock validation fails on big endian
devices with the following error:
F2FS-fs (sda1): Wrong segment_count / block_count (61439 > 0)
F2FS-fs (sda1): Can't find valid F2FS filesystem in 1th superblock
F2FS-fs (sda1): Wrong segment_count / block_count (61439 > 0)
F2FS-fs (sda1): Can't find valid F2FS filesystem in 2th superblock
As result of this the partition cannot be mounted.
With this patch applied the superblock validation works fine and the
partition can be mounted again:
F2FS-fs (sda1): Mounted with checkpoint version = 7c84
My little endian x86-64 hardware was able to mount the partition without
this fix.
To confirm that mounting f2fs filesystems works on big endian machines
again I tested this on a 32-bit MIPS big endian (lantiq) device.
Fixes:
0cfe75c5b01199 ("f2fs: enhance sanity_check_raw_super() to avoid potential overflows")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pan Bian [Thu, 22 Nov 2018 10:58:46 +0000 (18:58 +0800)]
f2fs: read page index before freeing
commit
0ea295dd853e0879a9a30ab61f923c26be35b902 upstream.
The function truncate_node frees the page with f2fs_put_page. However,
the page index is read after that. So, the patch reads the index before
freeing the page.
Fixes:
bf39c00a9a7f ("f2fs: drop obsolete node page when it is truncated")
Cc: <stable@vger.kernel.org>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Sat, 5 Jan 2019 19:45:13 +0000 (11:45 -0800)]
dax: Use non-exclusive wait in wait_entry_unlocked()
commit
d8a706414af4827fc0b4b1c0c631c607351938b9 upstream.
get_unlocked_entry() uses an exclusive wait because it is guaranteed to
eventually obtain the lock and follow on with an unlock+wakeup cycle.
The wait_entry_unlocked() path does not have the same guarantee. Rather
than open-code an extra wakeup, just switch to a non-exclusive wait.
Cc: Matthew Wilcox <willy@infradead.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matthew Wilcox [Sat, 5 Jan 2019 19:45:08 +0000 (11:45 -0800)]
dax: Don't access a freed inode
commit
55e56f06ed71d9441f3abd5b1d3c1a870812b3fe upstream.
After we drop the i_pages lock, the inode can be freed at any time.
The get_unlocked_entry() code has no choice but to reacquire the lock,
so it can't be used here. Create a new wait_entry_unlocked() which takes
care not to acquire the lock or dereference the address_space in any way.
Fixes:
c2a7d2a11552 ("filesystem-dax: Introduce dax_lock_mapping_entry()")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Breno Leitao [Mon, 26 Nov 2018 20:12:00 +0000 (18:12 -0200)]
powerpc/tm: Unset MSR[TS] if not recheckpointing
commit
6f5b9f018f4c7686fd944d920209d1382d320e4e upstream.
There is a TM Bad Thing bug that can be caused when you return from a
signal context in a suspended transaction but with ucontext MSR[TS] unset.
This forces regs->msr[TS] to be set at syscall entrance (since the CPU
state is transactional). It also calls treclaim() to flush the transaction
state, which is done based on the live (mfmsr) MSR state.
Since user context MSR[TS] is not set, then restore_tm_sigcontexts() is not
called, thus, not executing recheckpoint, keeping the CPU state as not
transactional. When calling rfid, SRR1 will have MSR[TS] set, but the CPU
state is non transactional, causing the TM Bad Thing with the following
stack:
[ 33.862316] Bad kernel stack pointer
3fffd9dce3e0 at
c00000000000c47c
cpu 0x8: Vector: 700 (Program Check) at [
c00000003ff7fd40]
pc:
c00000000000c47c: fast_exception_return+0xac/0xb4
lr:
00003fff865f442c
sp:
3fffd9dce3e0
msr:
8000000102a03031
current = 0xc00000041f68b700
paca = 0xc00000000fb84800 softe: 0 irq_happened: 0x01
pid = 1721, comm = tm-signal-sigre
Linux version 4.9.0-3-powerpc64le (debian-kernel@lists.debian.org) (gcc version 6.3.0
20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
WARNING: exception is not recoverable, can't continue
The same problem happens on 32-bits signal handler, and the fix is very
similar, if tm_recheckpoint() is not executed, then regs->msr[TS] should be
zeroed.
This patch also fixes a sparse warning related to lack of indentation when
CONFIG_PPC_TRANSACTIONAL_MEM is set.
Fixes:
2b0a576d15e0e ("powerpc: Add new transactional memory state to the signal context")
CC: Stable <stable@vger.kernel.org> # 3.10+
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>