iommu/arm-smmu-v3: Cope with duplicated Stream IDs

commit 563b5cbe334e9503ab2b234e279d500fc4f76018 upstream.

For PCI devices behind an aliasing PCIe-to-PCI/X bridge, the bridge
alias to DevFn 0.0 on the subordinate bus may match the original RID of
the device, resulting in the same SID being present in the device's
fwspec twice. This causes trouble later in arm_smmu_write_strtab_ent()
when we wind up visiting the STE a second time and find it already live.

Avoid the issue by giving arm_smmu_install_ste_for_dev() the cleverness
to skip over duplicates. It seems mildly counterintuitive compared to
preventing the duplicates from existing in the first place, but since
the DT and ACPI probe paths build their fwspecs differently, this is
actually the cleanest and most self-contained way to deal with it.

Fixes: 8f78515425da ("iommu/arm-smmu: Implement of_xlate() for SMMUv3")
Reported-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Tested-by: Jayachandran C. <jnair@caviumnetworks.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu-v3: Don't free page table ops twice

commit 57d72e159b60456c8bb281736c02ddd3164037aa upstream.

Kasan reports a double free when finalise_stage_fn fails: the io_pgtable
ops are freed by arm_smmu_domain_finalise and then again by
arm_smmu_domain_free. Prevent this by leaving pgtbl_ops empty on failure.

Fixes: 48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/signal.c: remove the no longer needed SIGNAL_UNKILLABLE check in complete_signal()

commit 426915796ccaf9c2bd9bb06dc5702225957bc2e5 upstream.

complete_signal() checks SIGNAL_UNKILLABLE before it starts to destroy
the thread group, today this is wrong in many ways.

If nothing else, fatal_signal_pending() should always imply that the
whole thread group (except ->group_exit_task if it is not NULL) is
killed, this check breaks the rule.

After the previous changes we can rely on sig_task_ignored();
sig_fatal(sig) && SIGNAL_UNKILLABLE can only be true if we actually want
to kill this task and sig == SIGKILL OR it is traced and debugger can
intercept the signal.

This should hopefully fix the problem reported by Dmitry.  This
test-case

static int init(void *arg)
{
for (;;)
pause();
}

int main(void)
{
char stack[16 * 1024];

for (;;) {
int pid = clone(init, stack + sizeof(stack)/2,
CLONE_NEWPID | SIGCHLD, NULL);
assert(pid > 0);

assert(ptrace(PTRACE_ATTACH, pid, 0, 0) == 0);
assert(waitpid(-1, NULL, WSTOPPED) == pid);

assert(ptrace(PTRACE_DETACH, pid, 0, SIGSTOP) == 0);
assert(syscall(__NR_tkill, pid, SIGKILL) == 0);
assert(pid == wait(NULL));
}
}

triggers the WARN_ON_ONCE(!(task->jobctl & JOBCTL_STOP_PENDING)) in
task_participate_group_stop().  do_signal_stop()->signal_group_exit()
checks SIGNAL_GROUP_EXIT and return false, but task_set_jobctl_pending()
checks fatal_signal_pending() and does not set JOBCTL_STOP_PENDING.

And his should fix the minor security problem reported by Kyle,
SECCOMP_RET_TRACE can miss fatal_signal_pending() the same way if the
task is the root of a pid namespace.

Link: http://lkml.kernel.org/r/20171103184246.GD21036@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Kyle Huey <me@kylehuey.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/signal.c: protect the SIGNAL_UNKILLABLE tasks from !sig_kernel_only() signals

commit ac25385089f673560867eb5179228a44ade0cfc1 upstream.

Change sig_task_ignored() to drop the SIG_DFL && !sig_kernel_only()
signals even if force == T.  This simplifies the next change and this
matches the same check in get_signal() which will drop these signals
anyway.

Link: http://lkml.kernel.org/r/20171103184227.GC21036@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/signal.c: protect the traced SIGNAL_UNKILLABLE tasks from SIGKILL

commit 628c1bcba204052d19b686b5bac149a644cdb72e upstream.

The comment in sig_ignored() says "Tracers may want to know about even
ignored signals" but SIGKILL can not be reported to debugger and it is
just wrong to return 0 in this case: SIGKILL should only kill the
SIGNAL_UNKILLABLE task if it comes from the parent ns.

Change sig_ignored() to ignore ->ptrace if sig == SIGKILL and rely on
sig_task_ignored().

SISGTOP coming from within the namespace is not really right too but at
least debugger can intercept it, and we can't drop it here because this
will break "gdb -p 1": ptrace_attach() won't work.  Perhaps we will add
another ->ptrace check later, we will see.

Link: http://lkml.kernel.org/r/20171103184206.GB21036@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86 / CPU: Always show current CPU frequency in /proc/cpuinfo

commit 7d5905dc14a87805a59f3c5bf70173aac2bb18f8 upstream.

After commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get()
for /proc/cpuinfo "cpu MHz"") the "cpu MHz" number in /proc/cpuinfo
on x86 can be either the nominal CPU frequency (which is constant)
or the frequency most recently requested by a scaling governor in
cpufreq, depending on the cpufreq configuration.  That is somewhat
inconsistent and is different from what it was before 4.13, so in
order to restore the previous behavior, make it report the current
CPU frequency like the scaling_cur_freq sysfs file in cpufreq.

To that end, modify the /proc/cpuinfo implementation on x86 to use
aperfmperf_snapshot_khz() to snapshot the APERF and MPERF feedback
registers, if available, and use their values to compute the CPU
frequency to be reported as "cpu MHz".

However, do that carefully enough to avoid accumulating delays that
lead to unacceptable access times for /proc/cpuinfo on systems with
many CPUs.  Run aperfmperf_snapshot_khz() once on all CPUs
asynchronously at the /proc/cpuinfo open time, add a single delay
upfront (if necessary) at that point and simply compute the current
frequency while running show_cpuinfo() for each individual CPU.

Also, to avoid slowing down /proc/cpuinfo accesses too much, reduce
the default delay between consecutive APERF and MPERF reads to 10 ms,
which should be sufficient to get large enough numbers for the
frequency computation in all cases.

Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86 / CPU: Avoid unnecessary IPIs in arch_freq_get_on_cpu()

commit b29c6ef7bb1257853c1e31616d84f55e561cf631 upstream.

Even though aperfmperf_snapshot_khz() caches the samples.khz value to
return if called again in a sufficiently short time, its caller,
arch_freq_get_on_cpu(), still uses smp_call_function_single() to run it
which may allow user space to trigger an IPI storm by reading from the
scaling_cur_freq cpufreq sysfs file in a tight loop.

To avoid that, move the decision on whether or not to return the cached
samples.khz value to arch_freq_get_on_cpu().

This change was part of commit 941f5f0f6ef5 ("x86: CPU: Fix up "cpu MHz"
in /proc/cpuinfo"), but it was not the reason for the revert and it
remains applicable.

Fixes: 4815d3c56d1e (cpufreq: x86: Make scaling_cur_freq behave more as expected)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: WANG Chao <chao.wang@ucloud.cn>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscache: Fix the default for fscache_maybe_release_page()

commit 98801506552593c9b8ac11021b0cdad12cab4f6b upstream.

Fix the default for fscache_maybe_release_page() for when the cookie isn't
valid or the page isn't cached.  It mustn't return false as that indicates
the page cannot yet be freed.

The problem with the default is that if, say, there's no cache, but a
network filesystem's pages are using up almost all the available memory, a
system can OOM because the filesystem ->releasepage() op will not allow
them to be released as fscache_maybe_release_page() incorrectly prevents
it.

This can be tested by writing a sequence of 512MiB files to an AFS mount.
It does not affect NFS or CIFS because both of those wrap the call in a
check of PG_fscache and it shouldn't bother Ceph as that only has
PG_private set whilst writeback is in progress.  This might be an issue for
9P, however.

Note that the pages aren't entirely stuck.  Removing a file or unmounting
will clear things because that uses ->invalidatepage() instead.

Fixes: 201a15428bd5 ("FS-Cache: Handle pages pending storage that get evicted under OOM conditions")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sunxi-rsb: Include OF based modalias in device uevent

commit e2bf801ecd4e62222a46d1ba9e57e710171d29c1 upstream.

Include the OF-based modalias in the uevent sent when registering devices
on the sunxi RSB bus, so that user space has a chance to autoload the
kernel module for the device.

Fixes a regression caused by commit 3f241bfa60bd ("arm64: allwinner: a64:
pine64: Use dcdc1 regulator for mmc0"). When the axp20x-rsb module for
the AXP803 PMIC is built as a module, it is not loaded and the system
ends up with an disfunctional MMC controller.

Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Apply Display WA #1183 on skl, kbl, and cfl

commit 30414f3010aff95ffdb6bed7b9dce62cde94fdc7 upstream.

Display WA #1183 was recently added to workaround
"Failures when enabling DPLL0 with eDP link rate 2.16
or 4.32 GHz and CD clock frequency 308.57 or 617.14 MHz
(CDCLK_CTL CD Frequency Select 10b or 11b) used in this
 enabling or in previous enabling."

This workaround was designed to minimize the impact only
to save the bad case with that link rates. But HW engineers
indicated that it should be safe to apply broadly, although
they were expecting the DPLL0 link rate to be unchanged on
runtime.

We need to cover 2 cases: when we are in fact enabling DPLL0
and when we are just changing the frequency with small
differences.

This is based on previous patch by Rodrigo Vivi with suggestions
from Ville Syrjälä.

Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171204232210.4958-1-lucas.demarchi@intel.com
(cherry picked from commit 53421c2fe99ce16838639ad89d772d914a119a49)
[ Lucas: Backport to 4.15 adding back variable that has been removed on
  commits not meant to be backported ]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180102201837.6812-1-lucas.demarchi@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Disable DC states around GMBUS on GLK

commit 3488d0237f6364614f0c59d6d784bb79b11eeb92 upstream.

Prevent the DMC from destroying GMBUS transfers on GLK. GMBUS
lives in PG1 so DC off is all we need.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208213739.16388-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
(cherry picked from commit 156961ae7bdf6feb72778e8da83d321b273343fd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: chelsio - select CRYPTO_GF128MUL

commit d042566d8c704e1ecec370300545d4a409222e39 upstream.

Without the gf128mul library support, we can run into a link
error:

drivers/crypto/chelsio/chcr_algo.o: In function `chcr_update_tweak':
chcr_algo.c:(.text+0x7e0): undefined reference to `gf128mul_x8_ble'

This adds a Kconfig select statement for it, next to the ones we
already have.

Fixes: b8fd1f4170e7 ("crypto: chcr - Add ctr mode and process large sg entries for cipher")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: pcrypt - fix freeing pcrypt instances

commit d76c68109f37cb85b243a1cf0f40313afd2bae68 upstream.

pcrypt is using the old way of freeing instances, where the ->free()
method specified in the 'struct crypto_template' is passed a pointer to
the 'struct crypto_instance'.  But the crypto_instance is being
kfree()'d directly, which is incorrect because the memory was actually
allocated as an aead_instance, which contains the crypto_instance at a
nonzero offset.  Thus, the wrong pointer was being kfree()'d.

Fix it by switching to the new way to free aead_instance's where the
->free() method is specified in the aead_instance itself.

Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 0496f56065e0 ("crypto: pcrypt - Add support for new AEAD interface")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: chacha20poly1305 - validate the digest size

commit e57121d08c38dabec15cf3e1e2ad46721af30cae upstream.

If the rfc7539 template was instantiated with a hash algorithm with
digest size larger than 16 bytes (POLY1305_DIGEST_SIZE), then the digest
overran the 'tag' buffer in 'struct chachapoly_req_ctx', corrupting the
subsequent memory, including 'cryptlen'.  This caused a crash during
crypto_skcipher_decrypt().

Fix it by, when instantiating the template, requiring that the
underlying hash algorithm has the digest size expected for Poly1305.

Reproducer:

    #include <linux/if_alg.h>
    #include <sys/socket.h>
    #include <unistd.h>

    int main()
    {
            int algfd, reqfd;
            struct sockaddr_alg addr = {
                    .salg_type = "aead",
                    .salg_name = "rfc7539(chacha20,sha256)",
            };
            unsigned char buf[32] = { 0 };

            algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
            bind(algfd, (void *)&addr, sizeof(addr));
            setsockopt(algfd, SOL_ALG, ALG_SET_KEY, buf, sizeof(buf));
            reqfd = accept(algfd, 0, 0);
            write(reqfd, buf, 16);
            read(reqfd, buf, 16);
    }

Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 71ebc4d1b27d ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: n2 - cure use after free

commit 203f45003a3d03eea8fa28d74cfc74c354416fdb upstream.

queue_cache_init is first called for the Control Word Queue
(n2_crypto_probe). At that time, queue_cache[0] is NULL and a new
kmem_cache will be allocated. If the subsequent n2_register_algs call
fails, the kmem_cache will be released in queue_cache_destroy, but
queue_cache_init[0] is not set back to NULL.

So when the Module Arithmetic Unit gets probed next (n2_mau_probe),
queue_cache_init will not allocate a kmem_cache again, but leave it
as its bogus value, causing a BUG() to trigger when queue_cache[0] is
eventually passed to kmem_cache_zalloc:

n2_crypto: Found N2CP at /virtual-devices@100/n2cp@7
n2_crypto: Registered NCS HVAPI version 2.0
called queue_cache_init
n2_crypto: md5 alg registration failed
n2cp f028687c: /virtual-devices@100/n2cp@7: Unable to register algorithms.
called queue_cache_destroy
n2cp: probe of f028687c failed with error -22
n2_crypto: Found NCP at /virtual-devices@100/ncp@6
n2_crypto: Registered NCS HVAPI version 2.0
called queue_cache_init
kernel BUG at mm/slab.c:2993!
Call Trace:
 [0000000000604488] kmem_cache_alloc+0x1a8/0x1e0
                  (inlined) kmem_cache_zalloc
                  (inlined) new_queue
                  (inlined) spu_queue_setup
                  (inlined) handle_exec_unit
 [0000000010c61eb4] spu_mdesc_scan+0x1f4/0x460 [n2_crypto]
 [0000000010c62b80] n2_mau_probe+0x100/0x220 [n2_crypto]
 [000000000084b174] platform_drv_probe+0x34/0xc0

Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/capsule-loader: Reinstate virtual capsule mapping

commit f24c4d478013d82bd1b943df566fff3561d52864 upstream.

Commit:

  82c3768b8d68 ("efi/capsule-loader: Use a cached copy of the capsule header")

... refactored the capsule loading code that maps the capsule header,
to avoid having to map it several times.

However, as it turns out, the vmap() call we ended up removing did not
just map the header, but the entire capsule image, and dropping this
virtual mapping breaks capsules that are processed by the firmware
immediately (i.e., without a reboot).

Unfortunately, that change was part of a larger refactor that allowed
a quirk to be implemented for Quark, which has a non-standard memory
layout for capsules, and we have slightly painted ourselves into a
corner by allowing quirk code to mangle the capsule header and memory
layout.

So we need to fix this without breaking Quark. Fortunately, Quark does
not appear to care about the virtual mapping, and so we can simply
do a partial revert of commit:

  2a457fb31df6 ("efi/capsule-loader: Use page addresses rather than struct page pointers")

... and create a vmap() mapping of the entire capsule (including header)
based on the reinstated struct page array, unless running on Quark, in
which case we pass the capsule header copy as before.

Reported-by: Ge Song <ge.song@hxt-semitech.com>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Tested-by: Ge Song <ge.song@hxt-semitech.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 82c3768b8d68 ("efi/capsule-loader: Use a cached copy of the capsule header")
Link: http://lkml.kernel.org/r/20180102172110.17018-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix refcount_t usage when deleting btrfs_delayed_nodes

commit ec35e48b286959991cdbb886f1bdeda4575c80b4 upstream.

refcounts have a generic implementation and an asm optimized one.  The
generic version has extra debugging to make sure that once a refcount
goes to zero, refcount_inc won't increase it.

The btrfs delayed inode code wasn't expecting this, and we're tripping
over the warnings when the generic refcounts are used.  We ended up with
this race:

Process A                                         Process B
                                                  btrfs_get_delayed_node()
  spin_lock(root->inode_lock)
  radix_tree_lookup()
__btrfs_release_delayed_node()
refcount_dec_and_test(&delayed_node->refs)
our refcount is now zero
  refcount_add(2) <---
  warning here, refcount
                                                  unchanged

spin_lock(root->inode_lock)
radix_tree_delete()

With the generic refcounts, we actually warn again when process B above
tries to release his refcount because refcount_add() turned into a
no-op.

We saw this in production on older kernels without the asm optimized
refcounts.

The fix used here is to use refcount_inc_not_zero() to detect when the
object is in the middle of being freed and return NULL.  This is almost
always the right answer anyway, since we usually end up pitching the
delayed_node if it didn't have fresh data in it.

This also changes __btrfs_release_delayed_node() to remove the extra
check for zero refcounts before radix tree deletion.
btrfs_get_delayed_node() was the only path that was allowing refcounts
to go from zero to one.

Fixes: 6de5f18e7b0da ("btrfs: fix refcount_t usage when deleting btrfs_delayed_node")
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: clear the vma->vm_userfaultfd_ctx if UFFD_EVENT_FORK fails

commit 0cbb4b4f4c44f54af268969b18d8deda63aded59 upstream.

The previous fix in commit 384632e67e08 ("userfaultfd: non-cooperative:
fix fork use after free") corrected the refcounting in case of
UFFD_EVENT_FORK failure for the fork userfault paths.

That still didn't clear the vma->vm_userfaultfd_ctx of the vmas that
were set to point to the aborted new uffd ctx earlier in
dup_userfaultfd.

Link: http://lkml.kernel.org/r/20171223002505.593-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/sparse.c: wrong allocation for mem_section

commit d09cfbbfa0f761a97687828b5afb27b56cbf2e19 upstream.

In commit 83e3c48729d9 ("mm/sparsemem: Allocate mem_section at runtime
for CONFIG_SPARSEMEM_EXTREME=y") mem_section is allocated at runtime to
save memory.

It allocates the first dimension of array with sizeof(struct mem_section).

It costs extra memory, should be sizeof(struct mem_section *).

Fix it.

Link: http://lkml.kernel.org/r/1513932498-20350-1-git-send-email-bhe@redhat.com
Fixes: 83e3c48729 ("mm/sparsemem: Allocate mem_section at runtime for CONFIG_SPARSEMEM_EXTREME=y")
Signed-off-by: Baoquan He <bhe@redhat.com>
Tested-by: Dave Young <dyoung@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Atsushi Kumagai <ats-kumagai@wm.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mprotect: add a cond_resched() inside change_pmd_range()

commit 4991c09c7c812dba13ea9be79a68b4565bb1fa4e upstream.

While testing on a large CPU system, detected the following RCU stall
many times over the span of the workload.  This problem is solved by
adding a cond_resched() in the change_pmd_range() function.

  INFO: rcu_sched detected stalls on CPUs/tasks:
   154-....: (670 ticks this GP) idle=022/140000000000000/0 softirq=2825/2825 fqs=612
   (detected by 955, t=6002 jiffies, g=4486, c=4485, q=90864)
  Sending NMI from CPU 955 to CPUs 154:
  NMI backtrace for cpu 154
  CPU: 154 PID: 147071 Comm: workload Not tainted 4.15.0-rc3+ #3
  NIP:  c0000000000b3f64 LR: c0000000000b33d4 CTR: 000000000000aa18
  REGS: 00000000a4b0fb44 TRAP: 0501   Not tainted  (4.15.0-rc3+)
  MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 22422082  XER: 00000000
  CFAR: 00000000006cf8f0 SOFTE: 1
  GPR00: 0010000000000000 c00003ef9b1cb8c0 c0000000010cc600 0000000000000000
  GPR04: 8e0000018c32b200 40017b3858fd6e00 8e0000018c32b208 40017b3858fd6e00
  GPR08: 8e0000018c32b210 40017b3858fd6e00 8e0000018c32b218 40017b3858fd6e00
  GPR12: ffffffffffffffff c00000000fb25100
  NIP [c0000000000b3f64] plpar_hcall9+0x44/0x7c
  LR [c0000000000b33d4] pSeries_lpar_flush_hash_range+0x384/0x420
  Call Trace:
    flush_hash_range+0x48/0x100
    __flush_tlb_pending+0x44/0xd0
    hpte_need_flush+0x408/0x470
    change_protection_range+0xaac/0xf10
    change_prot_numa+0x30/0xb0
    task_numa_work+0x2d0/0x3e0
    task_work_run+0x130/0x190
    do_notify_resume+0x118/0x120
    ret_from_except_lite+0x70/0x74
  Instruction dump:
  60000000 f8810028 7ca42b78 7cc53378 7ce63b78 7d074378 7d284b78 7d495378
  e9410060 e9610068 e9810070 44000022 <7d806378> e9810028 f88c0000 f8ac0008

Link: http://lkml.kernel.org/r/20171214140551.5794-1-khandual@linux.vnet.ibm.com
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/acct.c: fix the acct->needcheck check in check_free_space()

commit 4d9570158b6260f449e317a5f9ed030c2504a615 upstream.

As Tsukada explains, the time_is_before_jiffies(acct->needcheck) check
is very wrong, we need time_is_after_jiffies() to make sys_acct() work.

Ignoring the overflows, the code should "goto out" if needcheck >
jiffies, while currently it checks "needcheck < jiffies" and thus in the
likely case check_free_space() does nothing until jiffies overflow.

In particular this means that sys_acct() is simply broken, acct_on()
sets acct->needcheck = jiffies and expects that check_free_space()
should set acct->active = 1 after the free-space check, but this won't
happen if jiffies increments in between.

This was broken by commit 32dc73086015 ("get rid of timer in
kern/acct.c") in 2011, then another (correct) commit 795a2f22a8ea
("acct() should honour the limits from the very beginning") made the
problem more visible.

Link: http://lkml.kernel.org/r/20171213133940.GA6554@redhat.com
Fixes: 32dc73086015 ("get rid of timer in kern/acct.c")
Reported-by: TSUKADA Koutaro <tsukada@ascade.co.jp>
Suggested-by: TSUKADA Koutaro <tsukada@ascade.co.jp>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pti: Rename BUG_CPU_INSECURE to BUG_CPU_MELTDOWN

commit de791821c295cc61419a06fe5562288417d1bc58 upstream.

Use the name associated with the particular attack which needs page table
isolation for mitigation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Jiri Koshina <jikos@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Lutomirski <luto@amacapital.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Greg KH <gregkh@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801051525300.1724@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/alternatives: Add missing '\n' at end of ALTERNATIVE inline asm

commit b9e705ef7cfaf22db0daab91ad3cd33b0fa32eb9 upstream.

Where an ALTERNATIVE is used in the middle of an inline asm block, this
would otherwise lead to the following instruction being appended directly
to the trailing ".popsection", and a failed compile.

Fixes: 9cebed423c84 ("x86, alternative: Use .pushsection/.popsection")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: ak@linux.intel.com
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Link: https://lkml.kernel.org/r/20180104143710.8961-8-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/tlb: Drop the _GPL from the cpu_tlbstate export

commit 1e5476815fd7f98b888e01a0f9522b63085f96c9 upstream.

The recent changes for PTI touch cpu_tlbstate from various tlb_flush
inlines. cpu_tlbstate is exported as GPL symbol, so this causes a
regression when building out of tree drivers for certain graphics cards.

Aside of that the export was wrong since it was introduced as it should
have been EXPORT_PER_CPU_SYMBOL_GPL().

Use the correct PER_CPU export and drop the _GPL to restore the previous
state which allows users to utilize the cards they payed for.

As always I'm really thrilled to make this kind of change to support the
#friends (or however the hot hashtag of today is spelled) from that closet
sauce graphics corp.

Fixes: 1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4")
Fixes: 6fd166aae78c ("x86/mm: Use/Fix PCID to optimize user/kernel switches")
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/events/intel/ds: Use the proper cache flush method for mapping ds buffers

commit 42f3bdc5dd962a5958bc024c1e1444248a6b8b4a upstream.

Thomas reported the following warning:

 BUG: using smp_processor_id() in preemptible [00000000] code: ovsdb-server/4498
 caller is native_flush_tlb_single+0x57/0xc0
 native_flush_tlb_single+0x57/0xc0
 __set_pte_vaddr+0x2d/0x40
 set_pte_vaddr+0x2f/0x40
 cea_set_pte+0x30/0x40
 ds_update_cea.constprop.4+0x4d/0x70
 reserve_ds_buffers+0x159/0x410
 x86_reserve_hardware+0x150/0x160
 x86_pmu_event_init+0x3e/0x1f0
 perf_try_init_event+0x69/0x80
 perf_event_alloc+0x652/0x740
 SyS_perf_event_open+0x3f6/0xd60
 do_syscall_64+0x5c/0x190

set_pte_vaddr is used to map the ds buffers into the cpu entry area, but
there are two problems with that:

 1) The resulting flush is not supposed to be called in preemptible context

 2) The cpu entry area is supposed to be per CPU, but the debug store
    buffers are mapped for all CPUs so these mappings need to be flushed
    globally.

Add the necessary preemption protection across the mapping code and flush
TLBs globally.

Fixes: c1961a4631da ("x86/events/intel/ds: Map debug buffers in cpu_entry_area")
Reported-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Link: https://lkml.kernel.org/r/20180104170712.GB3040@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kaslr: Fix the vaddr_end mess

commit 1dddd25125112ba49706518ac9077a1026a18f37 upstream.

vaddr_end for KASLR is only documented in the KASLR code itself and is
adjusted depending on config options. So it's not surprising that a change
of the memory layout causes KASLR to have the wrong vaddr_end. This can map
arbitrary stuff into other areas causing hard to understand problems.

Remove the whole ifdef magic and define the start of the cpu_entry_area to
be the end of the KASLR vaddr range.

Add documentation to that effect.

Fixes: 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap")
Reported-by: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Alexander Kuleshov <kuleshovmail@gmail.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801041320360.1771@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Map cpu_entry_area at the same place on 4/5 level

commit f2078904810373211fb15f91888fba14c01a4acc upstream.

There is no reason for 4 and 5 level pagetables to have a different
layout. It just makes determining vaddr_end for KASLR harder than
necessary.

Fixes: 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Alexander Kuleshov <kuleshovmail@gmail.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801041320360.1771@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Set MODULES_END to 0xffffffffff000000

commit f5a40711fa58f1c109165a4fec6078bf2dfd2bdc upstream.

Since f06bdd4001c2 ("x86/mm: Adapt MODULES_END based on fixmap section size")
kasan_mem_to_shadow(MODULES_END) could be not aligned to a page boundary.

So passing page unaligned address to kasan_populate_zero_shadow() have two
possible effects:

1) It may leave one page hole in supposed to be populated area. After commit
  21506525fb8d ("x86/kasan/64: Teach KASAN about the cpu_entry_area") that
  hole happens to be in the shadow covering fixmap area and leads to crash:

 BUG: unable to handle kernel paging request at fffffbffffe8ee04
 RIP: 0010:check_memory_region+0x5c/0x190

 Call Trace:
  <NMI>
  memcpy+0x1f/0x50
  ghes_copy_tofrom_phys+0xab/0x180
  ghes_read_estatus+0xfb/0x280
  ghes_notify_nmi+0x2b2/0x410
  nmi_handle+0x115/0x2c0
  default_do_nmi+0x57/0x110
  do_nmi+0xf8/0x150
  end_repeat_nmi+0x1a/0x1e

Note, the crash likely disappeared after commit 92a0f81d8957, which
changed kasan_populate_zero_shadow() call the way it was before
commit 21506525fb8d.

2) Attempt to load module near MODULES_END will fail, because
   __vmalloc_node_range() called from kasan_module_alloc() will hit the
   WARN_ON(!pte_none(*pte)) in the vmap_pte_range() and bail out with error.

To fix this we need to make kasan_mem_to_shadow(MODULES_END) page aligned
which means that MODULES_END should be 8*PAGE_SIZE aligned.

The whole point of commit f06bdd4001c2 was to move MODULES_END down if
NR_CPUS is big, so the cpu_entry_area takes a lot of space.
But since 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap")
the cpu_entry_area is no longer in fixmap, so we could just set
MODULES_END to a fixed 8*PAGE_SIZE aligned address.

Fixes: f06bdd4001c2 ("x86/mm: Adapt MODULES_END based on fixmap section size")
Reported-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Garnier <thgarnie@google.com>
Link: https://lkml.kernel.org/r/20171228160620.23818-1-aryabinin@virtuozzo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.12

rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate

commit 05a03bf260e0480bfc0db91b1fdbc2115e3f193b upstream.

m41t80_sqw_set_rate will be called with the result from
m41t80_sqw_round_rate, so might as well make
m41t80_sqw_set_rate(n) same as
m41t80_sqw_set_rate(m41t80_sqw_round_rate(n))

As Russell King wrote[1],
"clk_round_rate() is supposed to tell you what you end up with if you
ask clk_set_rate() to set the exact same value you passed in - but
clk_round_rate() won't modify the hardware."

[1]
http://lists.infradead.org/pipermail/linux-arm-kernel/2012-January/080175.html

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared

commit 13bb1d78f2e372ec0d9b30489ac63768240140fc upstream.

This is a little more efficient and avoids the warning

 WARNING: possible circular locking dependency detected
 4.14.0-rc7-00010 #16 Not tainted
 ------------------------------------------------------
 kworker/2:1/70 is trying to acquire lock:
  (prepare_lock){+.+.}, at: [<c049300c>] clk_prepare_lock+0x80/0xf4

 but task is already holding lock:
  (i2c_register_adapter){+.+.}, at: [<c0690b04>]
i2c_adapter_lock_bus+0x14/0x18

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (i2c_register_adapter){+.+.}:
        rt_mutex_lock+0x44/0x5c
        i2c_adapter_lock_bus+0x14/0x18
        i2c_transfer+0xa8/0xbc
        i2c_smbus_xfer+0x20c/0x5d8
        i2c_smbus_read_byte_data+0x38/0x48
        m41t80_sqw_is_prepared+0x18/0x28

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate

commit 2cb90ed3de1e279dbaf23df141f54eb9fb1861e6 upstream.

This is a little more efficient, and avoids the warning

 WARNING: possible circular locking dependency detected
 4.14.0-rc7-00007 #14 Not tainted
 ------------------------------------------------------
 alsactl/330 is trying to acquire lock:
 (prepare_lock){+.+.}, at: [<c049300c>] clk_prepare_lock+0x80/0xf4

 but task is already holding lock:
 (i2c_register_adapter){+.+.}, at: [<c0690ae0>]
i2c_adapter_lock_bus+0x14/0x18

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (i2c_register_adapter){+.+.}:
        rt_mutex_lock+0x44/0x5c
        i2c_adapter_lock_bus+0x14/0x18
        i2c_transfer+0xa8/0xbc
        i2c_smbus_xfer+0x20c/0x5d8
        i2c_smbus_read_byte_data+0x38/0x48
        m41t80_sqw_recalc_rate+0x24/0x58

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: m41t80: fix m41t80_sqw_round_rate return value

commit c8384bb04261b9d32fe7402a6068ddaf38913b23 upstream.

Previously it was returning the best of
32768, 8192, 1024, 64, 2, 0

Now, best of
32768, 8192, 4096, 2048, 1024, 512, 256, 128,
64, 32, 16, 8, 4, 2, 1, 0

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: m41t80: m41t80_sqw_set_rate should return 0 on success

commit de6042d2fa8afe22b76e3c68fd6e9584c9415a3b upstream.

Previously it was returning -EINVAL upon success.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "xfrm: Fix stack-out-of-bounds read in xfrm_state_find."

commit 94802151894d482e82c324edf2c658f8e6b96508 upstream.

This reverts commit c9f3f813d462c72dbe412cee6a5cbacf13c4ad5e.

This commit breaks transport mode when the policy template
has widlcard addresses configured, so revert it.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Cc: From: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/process: Define cpu_tss_rw in same section as declaration

commit 2fd9c41aea47f4ad071accf94b94f94f2c4d31eb upstream.

cpu_tss_rw is declared with DECLARE_PER_CPU_PAGE_ALIGNED
but then defined with DEFINE_PER_CPU_SHARED_ALIGNED
leading to section mismatch warnings.

Use DEFINE_PER_CPU_PAGE_ALIGNED consistently. This is necessary because
it's mapped to the cpu entry area and must be page aligned.

[ tglx: Massaged changelog a bit ]

Fixes: 1a935bc3d4ea ("x86/entry: Move SYSENTER_stack to the beginning of struct tss_struct")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: thomas.lendacky@amd.com
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: tklauser@distanz.ch
Cc: minipli@googlemail.com
Cc: me@kylehuey.com
Cc: namit@vmware.com
Cc: luto@kernel.org
Cc: jpoimboe@redhat.com
Cc: tj@kernel.org
Cc: cl@linux.com
Cc: bp@suse.de
Cc: thgarnie@google.com
Cc: kirill.shutemov@linux.intel.com
Link: https://lkml.kernel.org/r/20180103203954.183360-1-ndesaulniers@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pti: Switch to kernel CR3 at early in entry_SYSCALL_compat()

commit d7732ba55c4b6a2da339bb12589c515830cfac2c upstream.

The preparation for PTI which added CR3 switching to the entry code
misplaced the CR3 switch in entry_SYSCALL_compat().

With PTI enabled the entry code tries to access a per cpu variable after
switching to kernel GS. This fails because that variable is not mapped to
user space. This results in a double fault and in the worst case a kernel
crash.

Move the switch ahead of the access and clobber RSP which has been saved
already.

Fixes: 8a09317b895f ("x86/mm/pti: Prepare the x86/entry assembly code for entry/exit CR3 switching")
Reported-by: Lars Wendler <wendler.lars@web.de>
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>,
Cc: Dave Hansen <dave.hansen@linux.intel.com>,
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Greg KH <gregkh@linuxfoundation.org>, ,
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>,
Cc: Juergen Gross <jgross@suse.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801031949200.1957@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/dumpstack: Print registers for first stack frame

commit 3ffdeb1a02be3086f1411a15c5b9c481fa28e21f upstream.

In the stack dump code, if the frame after the starting pt_regs is also
a regs frame, the registers don't get printed.  Fix that.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Tested-by: Alexander Tsoy <alexander@tsoy.me>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toralf Förster <toralf.foerster@gmx.de>
Fixes: 3b3fa11bc700 ("x86/dumpstack: Print any pt_regs found on the stack")
Link: http://lkml.kernel.org/r/396f84491d2f0ef64eda4217a2165f5712f6a115.1514736742.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/dumpstack: Fix partial register dumps

commit a9cdbe72c4e8bf3b38781c317a79326e2e1a230d upstream.

The show_regs_safe() logic is wrong.  When there's an iret stack frame,
it prints the entire pt_regs -- most of which is random stack data --
instead of just the five registers at the end.

show_regs_safe() is also poorly named: the on_stack() checks aren't for
safety.  Rename the function to show_regs_if_on_stack() and add a
comment to explain why the checks are needed.

These issues were introduced with the "partial register dump" feature of
the following commit:

  b02fcf9ba121 ("x86/unwinder: Handle stack overflows more gracefully")

That patch had gone through a few iterations of development, and the
above issues were artifacts from a previous iteration of the patch where
'regs' pointed directly to the iret frame rather than to the (partially
empty) pt_regs.

Tested-by: Alexander Tsoy <alexander@tsoy.me>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toralf Förster <toralf.foerster@gmx.de>
Fixes: b02fcf9ba121 ("x86/unwinder: Handle stack overflows more gracefully")
Link: http://lkml.kernel.org/r/5b05b8b344f59db2d3d50dbdeba92d60f2304c54.1514736742.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pti: Make sure the user/kernel PTEs match

commit 52994c256df36fda9a715697431cba9daecb6b11 upstream.

Meelis reported that his K8 Athlon64 emits MCE warnings when PTI is
enabled:

[Hardware Error]: Error Addr: 0x0000ffff81e000e0
[Hardware Error]: MC1 Error: L1 TLB multimatch.
[Hardware Error]: cache level: L1, tx: INSN

The address is in the entry area, which is mapped into kernel _AND_ user
space. That's special because we switch CR3 while we are executing
there.

User mapping:
0xffffffff81e00000-0xffffffff82000000           2M     ro         PSE     GLB x  pmd

Kernel mapping:
0xffffffff81000000-0xffffffff82000000          16M     ro         PSE         x  pmd

So the K8 is complaining that the TLB entries differ. They differ in the
GLB bit.

Drop the GLB bit when installing the user shared mapping.

Fixes: 6dc72c3cbca0 ("x86/mm/pti: Share entry text PMD")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Meelis Roos <mroos@linux.ee>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801031407180.1957@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu, x86/pti: Do not enable PTI on AMD processors

commit 694d99d40972f12e59a3696effee8a376b79d7c8 upstream.

AMD processors are not subject to the types of attacks that the kernel
page table isolation feature protects against.  The AMD microarchitecture
does not allow memory references, including speculative references, that
access higher privileged data when running in a lesser privileged mode
when that access would result in a page fault.

Disable page table isolation by default on AMD processors by not setting
the X86_BUG_CPU_INSECURE feature, which controls whether X86_FEATURE_PTI
is set.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20171227054354.20369.94587.stgit@tlendack-t1.amdoffice.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

capabilities: fix buffer overread on very short xattr

commit dc32b5c3e6e2ef29cef76d9ce1b92d394446150e upstream.

If userspace attempted to set a "security.capability" xattr shorter than
4 bytes (e.g. 'setfattr -n security.capability -v x file'), then
cap_convert_nscap() read past the end of the buffer containing the xattr
value because it accessed the ->magic_etc field without verifying that
the xattr value is long enough to contain that field.

Fix it by validating the xattr value size first.

This bug was found using syzkaller with KASAN.  The KASAN report was as
follows (cleaned up slightly):

    BUG: KASAN: slab-out-of-bounds in cap_convert_nscap+0x514/0x630 security/commoncap.c:498
    Read of size 4 at addr ffff88002d8741c0 by task syz-executor1/2852

    CPU: 0 PID: 2852 Comm: syz-executor1 Not tainted 4.15.0-rc6-00200-gcc0aac99d977 #253
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    Call Trace:
     __dump_stack lib/dump_stack.c:17 [inline]
     dump_stack+0xe3/0x195 lib/dump_stack.c:53
     print_address_description+0x73/0x260 mm/kasan/report.c:252
     kasan_report_error mm/kasan/report.c:351 [inline]
     kasan_report+0x235/0x350 mm/kasan/report.c:409
     cap_convert_nscap+0x514/0x630 security/commoncap.c:498
     setxattr+0x2bd/0x350 fs/xattr.c:446
     path_setxattr+0x168/0x1b0 fs/xattr.c:472
     SYSC_setxattr fs/xattr.c:487 [inline]
     SyS_setxattr+0x36/0x50 fs/xattr.c:483
     entry_SYSCALL_64_fastpath+0x18/0x85

Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exec: Weaken dumpability for secureexec

commit e816c201aed5232171f8eb80b5d46ae6516683b9 upstream.

This is a logical revert of commit e37fdb785a5f ("exec: Use secureexec
for setting dumpability")

This weakens dumpability back to checking only for uid/gid changes in
current (which is useless), but userspace depends on dumpability not
being tied to secureexec.

  https://bugzilla.redhat.com/show_bug.cgi?id=1528633

Reported-by: Tom Horsley <horsley1953@gmail.com>
Fixes: e37fdb785a5f ("exec: Use secureexec for setting dumpability")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.11

tty: fix tty_ldisc_receive_buf() documentation

commit e7e51dcf3b8a5f65c5653a054ad57eb2492a90d0 upstream.

The tty_ldisc_receive_buf() helper returns the number of bytes
processed so drop the bogus "not" from the kernel doc comment.

Fixes: 8d082cd300ab ("tty: Unify receive_buf() code paths")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)

commit 966031f340185eddd05affcf72b740549f056348 upstream.

We added support for EXTPROC back in 2010 in commit 26df6d13406d ("tty:
Add EXTPROC support for LINEMODE") and the intent was to allow it to
override some (all?) ICANON behavior.  Quoting from that original commit
message:

         There is a new bit in the termios local flag word, EXTPROC.
         When this bit is set, several aspects of the terminal driver
         are disabled.  Input line editing, character echo, and mapping
         of signals are all disabled.  This allows the telnetd to turn
         off these functions when in linemode, but still keep track of
         what state the user wants the terminal to be in.

but the problem turns out that "several aspects of the terminal driver
are disabled" is a bit ambiguous, and you can really confuse the n_tty
layer by setting EXTPROC and then causing some of the ICANON invariants
to no longer be maintained.

This fixes at least one such case (TIOCINQ) becoming unhappy because of
the confusion over whether ICANON really means ICANON when EXTPROC is set.

This basically makes TIOCINQ match the case of read: if EXTPROC is set,
we ignore ICANON.  Also, make sure to reset the ICANON state ie EXTPROC
changes, not just if ICANON changes.

Fixes: 26df6d13406d ("tty: Add EXTPROC support for LINEMODE")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/ldt: Make LDT pgtable free conditional

commit 7f414195b0c3612acd12b4611a5fe75995cf10c7 upstream.

Andy prefers to be paranoid about the pagetable free in the error path of
write_ldt(). Make it conditional and warn whenever the installment of a
secondary LDT fails.

Requested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/ldt: Plug memory leak in error path

commit a62d69857aab4caa43049e72fe0ed5c4a60518dd upstream.

The error path in write_ldt() tries to free 'old_ldt' instead of the newly
allocated 'new_ldt', resulting in a memory leak. It also misses to clean up a
half populated LDT pagetable, which is not a leak as it gets cleaned up
when the process exits.

Free both the potentially half populated LDT pagetable and the newly
allocated LDT struct. This can be done unconditionally because once an LDT
is mapped subsequent maps will succeed, because the PTE page is already
populated and the two LDTs fit into that single page.

Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: f55f0501cbf6 ("x86/pti: Put the LDT in its own PGD if PTI is on")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1712311121340.1899@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/espfix/64: Fix espfix double-fault handling on 5-level systems

commit c739f930be1dd5fd949030e3475a884fe06dae9b upstream.

Using PGDIR_SHIFT to identify espfix64 addresses on 5-level systems
was wrong, and it resulted in panics due to unhandled double faults.
Use P4D_SHIFT instead, which is correct on 4-level and 5-level
machines.

This fixes a panic when running x86 selftests on 5-level machines.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 1d33b219563f ("x86/espfix: Add support for 5-level paging")
Link: http://lkml.kernel.org/r/24c898b4f44fdf8c22d93703850fb384ef87cfdc.1513035461.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR)

commit ac461122c88a10b7d775de2f56467f097c9e627a upstream.

Commit e802a51ede91 ("x86/idt: Consolidate IDT invalidation") cleaned up
and unified the IDT invalidation that existed in a couple of places.  It
changed no actual real code.

Despite not changing any actual real code, it _did_ change code generation:
by implementing the common idt_invalidate() function in
archx86/kernel/idt.c, it made the use of the function in
arch/x86/kernel/machine_kexec_32.c be a real function call rather than an
(accidental) inlining of the function.

That, in turn, exposed two issues:

 - in load_segments(), we had incorrectly reset all the segment
   registers, which then made the stack canary load (which gcc does
   using offset of %gs) cause a trap.  Instead of %gs pointing to the
   stack canary, it will be the normal zero-based kernel segment, and
   the stack canary load will take a page fault at address 0x14.

 - to make this even harder to debug, we had invalidated the GDT just
   before calling idt_invalidate(), which meant that the fault happened
   with an invalid GDT, which in turn causes a triple fault and
   immediate reboot.

Fix this by

 (a) not reloading the special segments in load_segments(). We currently
     don't do any percpu accesses (which would require %fs on x86-32) in
     this area, but there's no reason to think that we might not want to
     do them, and like %gs, it's pointless to break it.

 (b) doing idt_invalidate() before invalidating the GDT, to keep things
     at least _slightly_ more debuggable for a bit longer. Without a
     IDT, traps will not work. Without a GDT, traps also will not work,
     but neither will any segment loads etc. So in a very real sense,
     the GDT is even more core than the IDT.

Fixes: e802a51ede91 ("x86/idt: Consolidate IDT invalidation")
Reported-and-tested-by: Alexandru Chirvasitu <achirvasub@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/alpine.LFD.2.21.1712271143180.8572@i7.lan
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Remove preempt_disable/enable() from __native_flush_tlb()

commit decab0888e6e14e11d53cefa85f8b3d3b45ce73c upstream.

The preempt_disable/enable() pair in __native_flush_tlb() was added in
commit:

  5cf0791da5c1 ("x86/mm: Disable preemption during CR3 read+write")

... to protect the UP variant of flush_tlb_mm_range().

That preempt_disable/enable() pair should have been added to the UP variant
of flush_tlb_mm_range() instead.

The UP variant was removed with commit:

  ce4a4e565f52 ("x86/mm: Remove the UP asm/tlbflush.h code, always use the (formerly) SMP code")

... but the preempt_disable/enable() pair stayed around.

The latest change to __native_flush_tlb() in commit:

  6fd166aae78c ("x86/mm: Use/Fix PCID to optimize user/kernel switches")

... added an access to a per CPU variable outside the preempt disabled
regions, which makes no sense at all. __native_flush_tlb() must always
be called with at least preemption disabled.

Remove the preempt_disable/enable() pair and add a WARN_ON_ONCE() to catch
bad callers independent of the smp_processor_id() debugging.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171230211829.679325424@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/smpboot: Remove stale TLB flush invocations

commit 322f8b8b340c824aef891342b0f5795d15e11562 upstream.

smpboot_setup_warm_reset_vector() and smpboot_restore_warm_reset_vector()
invoke local_flush_tlb() for no obvious reason.

Digging in history revealed that the original code in the 2.1 era added
those because the code manipulated a swapper_pg_dir pagetable entry. The
pagetable manipulation was removed long ago in the 2.3 timeframe, but the
TLB flush invocations stayed around forever.

Remove them along with the pointless pr_debug()s which come from the same 2.1
change.

Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171230211829.586548655@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()

commit 5d62c183f9e9df1deeea0906d099a94e8a43047a upstream.

The conditions in irq_exit() to invoke tick_nohz_irq_exit() which
subsequently invokes tick_nohz_stop_sched_tick() are:

  if ((idle_cpu(cpu) && !need_resched()) || tick_nohz_full_cpu(cpu))

If need_resched() is not set, but a timer softirq is pending then this is
an indication that the softirq code punted and delegated the execution to
softirqd. need_resched() is not true because the current interrupted task
takes precedence over softirqd.

Invoking tick_nohz_irq_exit() in this case can cause an endless loop of
timer interrupts because the timer wheel contains an expired timer, but
softirqs are not yet executed. So it returns an immediate expiry request,
which causes the timer to fire immediately again. Lather, rinse and
repeat....

Prevent that by adding a check for a pending timer soft interrupt to the
conditions in tick_nohz_stop_sched_tick() which avoid calling
get_next_timer_interrupt(). That keeps the tick sched timer on the tick and
prevents a repetitive programming of an already expired timer.

Reported-by: Sebastian Siewior <bigeasy@linutronix.d>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272156050.2431@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Fix dma direction for dma_sync_sg_for_cpu/device

commit d6b246bb7a29703f53aa4c050b8b3205d749caee upstream.

Use the direction argument passed into begin_cpu_access
and end_cpu_access when calling the dma_sync_sg_for_cpu/device.
The actual cache primitive called depends on the direction
passed in.

Signed-off-by: Sushmita Susheelendra <ssusheel@codeaurora.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: base: cacheinfo: fix cache type for non-architected system cache

commit f57ab9a01a36ef3454333251cc57e3a9948b17bf upstream.

Commit dfea747d2aba ("drivers: base: cacheinfo: support DT overrides for
cache properties") doesn't initialise the cache type if it's present
only in DT and the architecture is not aware of it. They are unified
system level cache which are generally transparent.

This patch check if the cache type is set to NOCACHE but the DT node
indicates that it's unified cache and sets the cache type accordingly.

Fixes: dfea747d2aba ("drivers: base: cacheinfo: support DT overrides for cache properties")
Reported-and-tested-by: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: tegra: fix device-tree node lookups

commit 046046737bd35bed047460f080ea47e186be731e upstream.

Fix child-node lookups during probe, which ended up searching the whole
device tree depth-first starting at the parents rather than just
matching on their children.

To make things worse, some parent nodes could end up being being
prematurely freed (by tegra_xusb_pad_register()) as
of_find_node_by_name() drops a reference to its first argument.

Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: fix proc->files use-after-free

commit 7f3dc0088b98533f17128058fac73cd8b2752ef1 upstream.

proc->files cleanup is initiated by binder_vma_close. Therefore
a reference on the binder_proc is not enough to prevent the
files_struct from being released while the binder_proc still has
a reference. This can lead to an attempt to dereference the
stale pointer obtained from proc->files prior to proc->files
cleanup. This has been seen once in task_get_unused_fd_flags()
when __alloc_fd() is called with a stale "files".

The fix is to protect proc->files with a mutex to prevent cleanup
while in use.

Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timers: Reinitialize per cpu bases on hotplug

commit 26456f87aca7157c057de65c9414b37f1ab881d1 upstream.

The timer wheel bases are not (re)initialized on CPU hotplug. That leaves
them with a potentially stale clk and next_expiry valuem, which can cause
trouble then the CPU is plugged.

Add a prepare callback which forwards the clock, sets next_expiry to far in
the future and reset the control flags to a known state.

Set base->must_forward_clk so the first timer which is queued will try to
forward the clock to current jiffies.

Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel")
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272152200.2431@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timers: Invoke timer_start_debug() where it makes sense

commit fd45bb77ad682be728d1002431d77b8c73342836 upstream.

The timer start debug function is called before the proper timer base is
set. As a consequence the trace data contains the stale CPU and flags
values.

Call the debug function after setting the new base and flags.

Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: rt@linutronix.de
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Link: https://lkml.kernel.org/r/20171222145337.792907137@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timers: Use deferrable base independent of base::nohz_active

commit ced6d5c11d3e7b342f1a80f908e6756ebd4b8ddd upstream.

During boot and before base::nohz_active is set in the timer bases, deferrable
timers are enqueued into the standard timer base. This works correctly as
long as base::nohz_active is false.

Once it base::nohz_active is set and a timer which was enqueued before that
is accessed the lock selector code choses the lock of the deferred
base. This causes unlocked access to the standard base and in case the
timer is removed it does not clear the pending flag in the standard base
bitmap which causes get_next_timer_interrupt() to return bogus values.

To prevent that, the deferrable timers must be enqueued in the deferrable
base, even when base::nohz_active is not set. Those deferrable timers also
need to be expired unconditional.

Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel")
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: rt@linutronix.de
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/20171222145337.633328378@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201

commit da99706689481717998d1d48edd389f339eea979 upstream.

When plugging in a USB webcam I see the following message:
xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs
XHCI_TRUST_TX_LENGTH quirk?
handle_tx_event: 913 callbacks suppressed

All is quiet again with this patch (and I've done a fair but of soak
testing with the camera since).

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Fix off by one in type-specific length check of BOS SSP capability

commit 07b9f12864d16c3a861aef4817eb1efccbc5d0e6 upstream.

USB 3.1 devices are not detected as 3.1 capable since 4.15-rc3 due to a
off by one in commit 81cf4a45360f ("USB: core: Add type-specific length
check of BOS descriptors")

It uses USB_DT_USB_SSP_CAP_SIZE() to get SSP capability size which takes
the zero based SSAC as argument, not the actual count of sublink speed
attributes.

USB3 spec 9.6.2.5 says "The number of Sublink Speed Attributes = SSAC + 1."

The type-specific length check patch was added to stable and needs to be
fixed there as well

Fixes: 81cf4a45360f ("USB: core: Add type-specific length check of BOS descriptors")
CC: Masakazu Mokuno <masakazu.mokuno@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: add RESET_RESUME for ELSA MicroLink 56K

commit b9096d9f15c142574ebebe8fbb137012bb9d99c2 upstream.

This modem needs this quirk to operate. It produces timeouts when
resumed without reset.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: Add device quirk for Logitech HD Pro Webcam C925e

commit 7f038d256c723dd390d2fca942919573995f4cfd upstream.

Commit e0429362ab15
("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e")
introduced quirk to workaround an issue with some Logitech webcams.

There is one more model that has the same issue - C925e, so applying
the same quirk as well.

See aforementioned commit message for detailed explanation of the problem.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: adding support for YUGA CLM920-NC5

commit 3920bb713038810f25770e7545b79f204685c8f2 upstream.

This patch adds support for YUGA CLM920-NC5 PID 0x9625 USB modem to option
driver.

Interface layout:
0: QCDM/DIAG
1: ADB
2: MODEM
3: AT
4: RMNET

Signed-off-by: Taiyi Wu <taiyity.wu@moxa.com>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for Telit ME910 PID 0x1101

commit 08933099e6404f588f81c2050bfec7313e06eeaf upstream.

This patch adds support for PID 0x1101 of Telit ME910.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: qcserial: add Sierra Wireless EM7565

commit 92a18a657fb2e2ffbfa0659af32cc18fd2346516 upstream.

Sierra Wireless EM7565 devices use the QCSERIAL_SWI layout for their
serial ports

T:  Bus=01 Lev=03 Prnt=29 Port=01 Cnt=02 Dev#= 31 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1199 ProdID=9091 Rev= 0.06
S:  Manufacturer=Sierra Wireless, Incorporated
S:  Product=Sierra Wireless EM7565 Qualcomm Snapdragon X16 LTE-A
S:  SerialNumber=xxxxxxxx
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

but need sendsetup = true for the NMEA port to make it work properly.

Simplify the patch compared to v1 as suggested by Bjørn Mork by taking
advantage of the fact that existing devices work with sendsetup = true
too.

Use sendsetup = true for the NMEA interface of QCSERIAL_SWI and add
DEVICE_SWI entries for the EM7565 PID 0x9091 and the EM7565 QDL PID
0x9090.

Tests with several MC73xx/MC74xx/MC77xx devices have been performed in
order to verify backward compatibility.

Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: add id for Airbus DS P8GR

commit c6a36ad383559a60a249aa6016cebf3cb8b6c485 upstream.

Add AIRBUS_DS_P8GR device IDs to ftdi_sio driver.

Signed-off-by: Max Schulze <max.schulze@posteo.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: chipidea: msm: fix ulpi-node lookup

commit 964728f9f407eca0b417fdf8e784b7a76979490c upstream.

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.

Note that the original premature free of the parent node has already
been fixed separately, but that fix was apparently never backported to
stable.

Fixes: 47654a162081 ("usb: chipidea: msm: Restore wrapper settings after reset")
Fixes: b74c43156c0c ("usb: chipidea: msm: ci_hdrc_msm_probe() missing of_node_get()")
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: vhci: stop printing kernel pointer addresses in messages

commit 8272d099d05f7ab2776cf56a2ab9f9443be18907 upstream.

Remove and/or change debug, info. and error messages to not print
kernel pointer addresses.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: stub: stop printing kernel pointer addresses in messages

commit 248a22044366f588d46754c54dfe29ffe4f8b4df upstream.

Remove and/or change debug, info. and error messages to not print
kernel pointer addresses.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: prevent leaking socket pointer address in messages

commit 90120d15f4c397272aaf41077960a157fc4212bf upstream.

usbip driver is leaking socket pointer address in messages. Remove
the messages that aren't useful and print sockfd in the ones that
are useful for debugging.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: fix usbip bind writing random string after command in match_busid

commit 544c4605acc5ae4afe7dd5914147947db182f2fb upstream.

usbip bind writes commands followed by random string when writing to
match_busid attribute in sysfs, caused by using full variable size
instead of string length.

Signed-off-by: Juan Zea <juan.zea@qindel.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: repair calling incorrect hweight function from stubs

[ Upstream commit 59585b4be9ae4dc6506551709bdcd6f5210b8a01 ]

Commit v4.12-rc4-1-g9289ea7f952b introduced a mistake that made the
64-bit hweight stub call the 16-bit hweight function.

Fixes: 9289ea7f952b ("sparc64: Use indirect calls in hamming weight stubs")
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

skbuff: in skb_copy_ubufs unclone before releasing zerocopy

skb_copy_ubufs must unclone before it is safe to modify its
skb_shared_info with skb_zcopy_clear.

Commit b90ddd568792 ("skbuff: skb_copy_ubufs must release uarg even
without user frags") ensures that all skbs release their zerocopy
state, even those without frags.

But I forgot an edge case where such an skb arrives that is cloned.

The stack does not build such packets. Vhost/tun skbs have their
frags orphaned before cloning. TCP skbs only attach zerocopy state
when a frag is added.

But if TCP packets can be trimmed or linearized, this might occur.
Tracing the code I found no instance so far (e.g., skb_linearize
ends up calling skb_zcopy_clear if !skb->data_len).

Still, it is non-obvious that no path exists. And it is fragile to
rely on this.

Fixes: b90ddd568792 ("skbuff: skb_copy_ubufs must release uarg even without user frags")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

skbuff: skb_copy_ubufs must release uarg even without user frags

[ Upstream commit b90ddd568792bcb0054eaf0f61785c8f80c3bd1c ]

skb_copy_ubufs creates a private copy of frags[] to release its hold
on user frags, then calls uarg->callback to notify the owner.

Call uarg->callback even when no frags exist. This edge case can
happen when zerocopy_sg_from_iter finds enough room in skb_headlen
to copy all the data.

Fixes: 3ece782693c4 ("sock: skb_copy_ubufs support for compound pages")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

skbuff: orphan frags before zerocopy clone

[ Upstream commit 268b790679422a89e9ab0685d9f291edae780c98 ]

Call skb_zerocopy_clone after skb_orphan_frags, to avoid duplicate
calls to skb_uarg(skb)->callback for the same data.

skb_zerocopy_clone associates skb_shinfo(skb)->uarg from frag_skb
with each segment. This is only safe for uargs that do refcounting,
which is those that pass skb_orphan_frags without dropping their
shared frags. For others, skb_orphan_frags drops the user frags and
sets the uarg to NULL, after which sock_zerocopy_clone has no effect.

Qemu hangs were reported due to duplicate vhost_net_zerocopy_callback
calls for the same data causing the vhost_net_ubuf_ref_>refcount to
drop below zero.

Link: http://lkml.kernel.org/r/<CAF=yD-LWyCD4Y0aJ9O0e_CHLR+3JOeKicRRTEVCPxgw4XOcqGQ@mail.gmail.com>
Fixes: 1f8b977ab32d ("sock: enable MSG_ZEROCOPY")
Reported-by: Andreas Hartmann <andihartmann@01019freenet.de>
Reported-by: David Hill <dhill@redhat.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "mlx5: move affinity hints assignments to generic code"

[ Upstream commit 231243c82793428467524227ae02ca451e6a98e7 ]

Before the offending commit, mlx5 core did the IRQ affinity itself,
and it seems that the new generic code have some drawbacks and one
of them is the lack for user ability to modify irq affinity after
the initial affinity values got assigned.

The issue is still being discussed and a solution in the new generic code
is required, until then we need to revert this patch.

This fixes the following issue:
echo <new affinity> > /proc/irq/<x>/smp_affinity
fails with  -EIO

This reverts commit a435393acafbf0ecff4deb3e3cb554b34f0d0664.
Note: kept mlx5_get_vector_affinity in include/linux/mlx5/driver.h since
it is used in mlx5_ib driver.

Fixes: a435393acafb ("mlx5: move affinity hints assignments to generic code")
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jes Sorensen <jsorensen@fb.com>
Reported-by: Jes Sorensen <jsorensen@fb.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: set all.accept_dad to 0 by default

[ Upstream commit 094009531612246d9e13f9e0c3ae2205d7f63a0a ]

With commits 35e015e1f577 and a2d3f3e33853, the global 'accept_dad' flag
is also taken into account (default value is 1). If either global or
per-interface flag is non-zero, DAD will be enabled on a given interface.

This is not backward compatible: before those patches, the user could
disable DAD just by setting the per-interface flag to 0. Now, the
user instead needs to set both flags to 0 to actually disable DAD.

Restore the previous behaviour by setting the default for the global
'accept_dad' flag to 0. This way, DAD is still enabled by default,
as per-interface flags are set to 1 on device creation, but setting
them to 0 is enough to disable DAD on a given interface.

- Before 35e015e1f57a7 and a2d3f3e33853:
          global    per-interface    DAD enabled
[default]   1             1              yes
            X             0              no
            X             1              yes

- After 35e015e1f577 and a2d3f3e33853:
          global    per-interface    DAD enabled
[default]   1             1              yes
            0             0              no
            0             1              yes
            1             0              yes

- After this fix:
          global    per-interface    DAD enabled
            1             1              yes
            0             0              no
[default]   0             1              yes
            1             0              yes

Fixes: 35e015e1f577 ("ipv6: fix net.ipv6.conf.all interface DAD handlers")
Fixes: a2d3f3e33853 ("ipv6: fix net.ipv6.conf.all.accept_dad behaviour for real")
CC: Stefano Brivio <sbrivio@redhat.com>
CC: Matteo Croce <mcroce@redhat.com>
CC: Erik Kline <ek@google.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: fib: Fix metrics match when deleting a route

[ Upstream commit d03a45572efa068fa64db211d6d45222660e76c5 ]

The recently added fib_metrics_match() causes a regression for routes
with both RTAX_FEATURES and RTAX_CC_ALGO if the latter has
TCP_CONG_NEEDS_ECN flag set:

| # ip link add d0 type dummy
| # ip link set d0 up
| # ip route add 172.29.29.0/24 dev d0 features ecn congctl dctcp
| # ip route del 172.29.29.0/24 dev d0 features ecn congctl dctcp
| RTNETLINK answers: No such process

During route insertion, fib_convert_metrics() detects that the given CC
algo requires ECN and hence sets DST_FEATURE_ECN_CA bit in
RTAX_FEATURES.

During route deletion though, fib_metrics_match() compares stored
RTAX_FEATURES value with that from userspace (which obviously has no
knowledge about DST_FEATURE_ECN_CA) and fails.

Fixes: 5f9ae3d9e7e4a ("ipv4: do metrics match when looking up and deleting a route")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phylink: ensure AN is enabled

[ Upstream commit 74ee0e8c1bf9925c59cc8f1c65c29adf6e4cf603 ]

Ensure that we mark AN as enabled at boot time, rather than leaving
it disabled.  This is noticable if your SFP module is fiber, and
it supports faster speeds than 1G with 2.5G support in place.

Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phylink: ensure the PHY interface mode is appropriately set

[ Upstream commit 182088aa3c6c7f7c20a2c1dcc9ded4a3fc631f38 ]

When setting the ethtool settings, ensure that the validated PHY
interface mode is propagated to the current link settings, so that
2500BaseX can be selected.

Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Fix sources of spurious netpoll warnings

[ Upstream commit 2edbdb3159d6f6bd3a9b6e7f789f2b879699a519 ]

After applying 2270bc5da3497945 ("bnxt_en: Fix netpoll handling") and
903649e718f80da2 ("bnxt_en: Improve -ENOMEM logic in NAPI poll loop."),
we still see the following WARN fire:

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 1875170 at net/core/netpoll.c:165 netpoll_poll_dev+0x15a/0x160
  bnxt_poll+0x0/0xd0 exceeded budget in poll
  <snip>
  Call Trace:
   [<ffffffff814be5cd>] dump_stack+0x4d/0x70
   [<ffffffff8107e013>] __warn+0xd3/0xf0
   [<ffffffff8107e07f>] warn_slowpath_fmt+0x4f/0x60
   [<ffffffff8179519a>] netpoll_poll_dev+0x15a/0x160
   [<ffffffff81795f38>] netpoll_send_skb_on_dev+0x168/0x250
   [<ffffffff817962fc>] netpoll_send_udp+0x2dc/0x440
   [<ffffffff815fa9be>] write_ext_msg+0x20e/0x250
   [<ffffffff810c8125>] call_console_drivers.constprop.23+0xa5/0x110
   [<ffffffff810c9549>] console_unlock+0x339/0x5b0
   [<ffffffff810c9a88>] vprintk_emit+0x2c8/0x450
   [<ffffffff810c9d5f>] vprintk_default+0x1f/0x30
   [<ffffffff81173df5>] printk+0x48/0x50
   [<ffffffffa0197713>] edac_raw_mc_handle_error+0x563/0x5c0 [edac_core]
   [<ffffffffa0197b9b>] edac_mc_handle_error+0x42b/0x6e0 [edac_core]
   [<ffffffffa01c3a60>] sbridge_mce_output_error+0x410/0x10d0 [sb_edac]
   [<ffffffffa01c47cc>] sbridge_check_error+0xac/0x130 [sb_edac]
   [<ffffffffa0197f3c>] edac_mc_workq_function+0x3c/0x90 [edac_core]
   [<ffffffff81095f8b>] process_one_work+0x19b/0x480
   [<ffffffff810967ca>] worker_thread+0x6a/0x520
   [<ffffffff8109c7c4>] kthread+0xe4/0x100
   [<ffffffff81884c52>] ret_from_fork+0x22/0x40

This happens because we increment rx_pkts on -ENOMEM and -EIO, resulting
in rx_pkts > 0. Fix this by only bumping rx_pkts if we were actually
given a non-zero budget.

Signed-off-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: fix static key imbalance in case of ingress/clsact_init error

[ Upstream commit b59e6979a86384e68b0ab6ffeab11f0034fba82d ]

Move static key increments to the beginning of the init function
so they pair 1:1 with decrements in ingress/clsact_destroy,
which is called in case ingress/clsact_init fails.

Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vxlan: restore dev->mtu setting based on lower device

[ Upstream commit f870c1ff65a6d1f3a083f277280802ee09a5b44d ]

Stefano Brivio says:
    Commit a985343ba906 ("vxlan: refactor verification and
    application of configuration") introduced a change in the
    behaviour of initial MTU setting: earlier, the MTU for a link
    created on top of a given lower device, without an initial MTU
    specification, was set to the MTU of the lower device minus
    headroom as a result of this path in vxlan_dev_configure():

if (!conf->mtu)
dev->mtu = lowerdev->mtu -
   (use_ipv6 ? VXLAN6_HEADROOM : VXLAN_HEADROOM);

    which is now gone. Now, the initial MTU, in absence of a
    configured value, is simply set by ether_setup() to ETH_DATA_LEN
    (1500 bytes).

    This breaks userspace expectations in case the MTU of
    the lower device is higher than 1500 bytes minus headroom.

This patch restores the previous behaviour on newlink operation. Since
max_mtu can be negative and we update dev->mtu directly, also check it
for valid minimum.

Reported-by: Junhan Yan <juyan@redhat.com>
Fixes: a985343ba906 ("vxlan: refactor verification and application of configuration")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: FPGA, return -EINVAL if size is zero

[ Upstream commit bae115a2bb479142605726e6aa130f43f50e801a ]

Currently, if a size of zero is passed to
mlx5_fpga_mem_{read|write}_i2c()
the "err" return value will not be initialized, which triggers gcc
warnings:

[..]/mlx5/core/fpga/sdk.c:87 mlx5_fpga_mem_read_i2c() error:
uninitialized symbol 'err'.
[..]/mlx5/core/fpga/sdk.c:115 mlx5_fpga_mem_write_i2c() error:
uninitialized symbol 'err'.

fix that.

Fixes: a9956d35d199 ('net/mlx5: FPGA, Add SBU infrastructure')
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: refresh tcp_mstamp from timers callbacks

[ Upstream commit 4688eb7cf3ae2c2721d1dacff5c1384cba47d176 ]

Only the retransmit timer currently refreshes tcp_mstamp

We should do the same for delayed acks and keepalives.

Even if RFC 7323 does not request it, this is consistent to what linux
did in the past, when TS values were based on jiffies.

Fixes: 385e20706fac ("tcp: use tp->tcp_mstamp in output path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Mike Maloney <maloney@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Mike Maloney <maloney@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Honor specified parameters in fibmatch lookup

[ Upstream commit 58acfd714e6b02e8617448b431c2b64a2f1f0792 ]

Currently, parameters such as oif and source address are not taken into
account during fibmatch lookup. Example (IPv4 for reference) before
patch:

$ ip -4 route show
192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1
198.51.100.0/24 dev dummy1 proto kernel scope link src 198.51.100.1

$ ip -6 route show
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium
2001:db8:2::/64 dev dummy1 proto kernel metric 256 pref medium
fe80::/64 dev dummy0 proto kernel metric 256 pref medium
fe80::/64 dev dummy1 proto kernel metric 256 pref medium

$ ip -4 route get fibmatch 192.0.2.2 oif dummy0
192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1
$ ip -4 route get fibmatch 192.0.2.2 oif dummy1
RTNETLINK answers: No route to host

$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium
$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium

After:

$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium
$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1
RTNETLINK answers: Network is unreachable

The problem stems from the fact that the necessary route lookup flags
are not set based on these parameters.

Instead of duplicating the same logic for fibmatch, we can simply
resolve the original route from its copy and dump it instead.

Fixes: 18c3a61c4264 ("net: ipv6: RTM_GETROUTE: return matched fib result when requested")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: marvell: Limit 88m1101 autoneg errata to 88E1145 as well.

[ Upstream commit c505873eaece2b4aefd07d339dc7e1400e0235ac ]

88E1145 also need this autoneg errata.

Fixes: f2899788353c ("net: phy: marvell: Limit errata to 88m1101")
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix potential underestimation on rcv_rtt

[ Upstream commit 9ee11bd03cb1a5c3ca33c2bb70e7ed325f68890f ]

When ms timestamp is used, current logic uses 1us in
tcp_rcv_rtt_update() when the real rcv_rtt is within 1 - 999us.
This could cause rcv_rtt underestimation.
Fix it by always using a min value of 1ms if ms timestamp is used.

Fixes: 645f4c6f2ebd ("tcp: switch rcv_rtt_est and rcvq_space to high resolution timestamps")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlxsw: spectrum: Disable MAC learning for ovs port

[ Upstream commit fccff0862838908d21eaf956d57e09c6c189f7c5 ]

Learning is currently enabled for ports which are OVS slaves -
even though OVS doesn't need this indication.
Since we're not associating a fid with the port, HW would continuously
notify driver of learned [& aged] MACs which would be logged as errors.

Fixes: 2b94e58df58c ("mlxsw: spectrum: Allow ports to work under OVS master")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix hanging poll() for stream sockets

[ Upstream commit 517d7c79bdb39864e617960504bdc1aa560c75c6 ]

In commit 42b531de17d2f6 ("tipc: Fix missing connection request
handling"), we replaced unconditional wakeup() with condtional
wakeup for clients with flags POLLIN | POLLRDNORM | POLLRDBAND.

This breaks the applications which do a connect followed by poll
with POLLOUT flag. These applications are not woken when the
connection is ESTABLISHED and hence sleep forever.

In this commit, we fix it by including the POLLOUT event for
sockets in TIPC_CONNECTING state.

Fixes: 42b531de17d2f6 ("tipc: Fix missing connection request handling")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: make sure stream nums can match optlen in sctp_setsockopt_reset_streams

[ Upstream commit 2342b8d95bcae5946e1b9b8d58645f37500ef2e7 ]

Now in sctp_setsockopt_reset_streams, it only does the check
optlen < sizeof(*params) for optlen. But it's not enough, as
params->srs_number_streams should also match optlen.

If the streams in params->srs_stream_list are less than stream
nums in params->srs_number_streams, later when dereferencing
the stream list, it could cause a slab-out-of-bounds crash, as
reported by syzbot.

This patch is to fix it by also checking the stream numbers in
sctp_setsockopt_reset_streams to make sure at least it's not
greater than the streams in the list.

Fixes: 7f9d68ac944e ("sctp: implement sender-side procedures for SSN Reset Request Parameter")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix error handling in checksum cmd callback

[ Upstream commit ad3cbf61332914711e5f506972b1dc9af8d62146 ]

Make sure to check both return code fields before processing the
response. Otherwise we risk operating on invalid data.

Fixes: c9475369bd2b ("s390/qeth: rework RX/TX checksum offload")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: bcm_sf2: Clear IDDQ_GLOBAL_PWR bit for PHY

[ Upstream commit 4b52d010113e11006a389f2a8315167ede9e0b10 ]

The PHY on BCM7278 has an additional bit that needs to be cleared:
IDDQ_GLOBAL_PWR, without doing this, the PHY remains stuck in reset out
of suspend/resume cycles.

Fixes: 0fe9933804eb ("net: dsa: bcm_sf2: Add support for BCM7278 integrated switch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sfc: pass valid pointers from efx_enqueue_unwind

[ Upstream commit d4a7a8893d4cdbc89d79ac4aa704bf8d4b67b368 ]

The bytes_compl and pkts_compl pointers passed to efx_dequeue_buffers
cannot be NULL. Add a paranoid warning to check this condition and fix
the one case where they were NULL.

efx_enqueue_unwind() is called very rarely, during error handling.
Without this fix it would fail with a NULL pointer dereference in
efx_dequeue_buffer, with efx_enqueue_skb in the call stack.

Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2")
Reported-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

openvswitch: Fix pop_vlan action for double tagged frames

[ Upstream commit c48e74736fccf25fb32bb015426359e1c2016e3b ]

skb_vlan_pop() expects skb->protocol to be a valid TPID for double
tagged frames. So set skb->protocol to the TPID and let skb_vlan_pop()
shift the true ethertype into position for us.

Fixes: 5108bbaddc37 ("openvswitch: add processing of L3 packets")
Signed-off-by: Eric Garver <e@erig.me>
Reviewed-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Fix error flow in CREATE_QP command

[ Upstream commit dbff26e44dc3ec4de6578733b054a0114652a764 ]

In error flow, when DESTROY_QP command should be executed, the wrong
mailbox was set with data, not the one that is written to hardware,
Fix that.

Fixes: 09a7d9eca1a6 '{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc'
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Prevent possible races in VXLAN control flow

[ Upstream commit 0c1cc8b2215f5122ca614b5adca60346018758c3 ]

When calling add/remove VXLAN port, a lock must be held in order to
prevent race scenarios when more than one add/remove happens at the
same time.
Fix by holding our state_lock (mutex) as done by all other parts of the
driver.
Note that the spinlock protecting the radix-tree is still needed in
order to synchronize radix-tree access from softirq context.

Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Add refcount to VXLAN structure

[ Upstream commit 23f4cc2cd9ed92570647220aca60d0197d8c1fa9 ]

A refcount mechanism must be implemented in order to prevent unwanted
scenarios such as:
- Open an IPv4 VXLAN interface
- Open an IPv6 VXLAN interface (different socket)
- Remove one of the interfaces

With current implementation, the UDP port will be removed from our VXLAN
database and turn off the offloads for the other interface, which is
still active.
The reference count mechanism will only allow UDP port removals once all
consumers are gone.

Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>