Lucas De Marchi [Wed, 16 Feb 2022 17:41:40 +0000 (09:41 -0800)]
drm/i915/guc: Convert guc_ads_private_data_reset to iosys_map
Use iosys_map_memset() to zero the private data as ADS may be either
on system or IO memory.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-10-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:39 +0000 (09:41 -0800)]
drm/i915/guc: Convert engine record to iosys_map
Use iosys_map to read fields from the dma_blob so access to IO and
system memory is abstracted away.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood<matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-9-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:38 +0000 (09:41 -0800)]
drm/i915/guc: Convert policies update to iosys_map
Use iosys_map to write the policies update so access to IO and system
memory is abstracted away.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-8-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:37 +0000 (09:41 -0800)]
drm/i915/guc: Convert golden context init to iosys_map
Now the map is saved during creation, so use it to initialize the
golden context, reading from shmem and writing to either system or IO
memory.
v2: Do not use a map iterator: add an offset to keep track of
destination
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-7-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:36 +0000 (09:41 -0800)]
drm/i915/guc: Add read/write helpers for ADS blob
Add helpers on top of iosys_map_read_field() /
iosys_map_write_field() functions so they always use the right
arguments and make code easier to read.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-6-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:35 +0000 (09:41 -0800)]
drm/i915/guc: Keep iosys_map of ads_blob around
Convert intel_guc_ads_create() and initialization to use iosys_map
rather than plain pointer and save it in the guc struct. This will help
with additional updates to the ads_blob after the
creation/initialization by abstracting the IO vs system memory.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-5-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:34 +0000 (09:41 -0800)]
drm/i915/gt: Add helper for shmem copy to iosys_map
Add a variant of shmem_read() that takes a iosys_map pointer rather
than a plain pointer as argument. It's mostly a copy __shmem_rw() but
adapting the api and removing the write support since there's currently
only need to use iosys_map as destination.
Reworking __shmem_rw() to share the implementation was tempting, but
finding a good balance between reuse and clarity pushed towards a little
code duplication. Since the function is small, just add the similar
function with a copy/paste/adapt approach.
v2: Add an offset as argument and instead of using a map iterator, use the
offset to keep track of where we are writing data to.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-4-lucas.demarchi@intel.com
Clint Taylor [Fri, 11 Feb 2022 05:23:33 +0000 (21:23 -0800)]
drm/i915/dg2: add Wa_14014947963
BSPEC: 46123
v2: Address review feedback [MattR]
v3: move register definition to gt_regs [MattR]
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211052333.12306-1-clinton.a.taylor@intel.com
Matthew Auld [Mon, 21 Feb 2022 12:11:03 +0000 (12:11 +0000)]
drm/i915/ttm: fixup the mock_bo
When running the mock selftests we currently blow up with:
<6> [299.836278] i915: Running i915_gem_huge_page_mock_selftests/igt_mock_memory_region_huge_pages
<1> [299.836356] BUG: kernel NULL pointer dereference, address:
00000000000000c8
<1> [299.836361] #PF: supervisor read access in kernel mode
<1> [299.836364] #PF: error_code(0x0000) - not-present page
<6> [299.836367] PGD 0 P4D 0
<4> [299.836369] Oops: 0000 [#1] PREEMPT SMP NOPTI
<4> [299.836372] CPU: 1 PID: 1429 Comm: i915_selftest Tainted: G U 5.17.0-rc4-CI-CI_DRM_11227+ #1
<4> [299.836376] Hardware name: Intel(R) Client Systems NUC11TNHi5/NUC11TNBi5, BIOS TNTGL357.0042.2020.1221.1743 12/21/2020
<4> [299.836380] RIP: 0010:ttm_resource_init+0x57/0x90 [ttm]
<4> [299.836392] RSP: 0018:
ffffc90001e4f680 EFLAGS:
00010203
<4> [299.836395] RAX:
0000000000000000 RBX:
ffffc90001e4f708 RCX:
0000000000000000
<4> [299.836398] RDX:
ffff888116172528 RSI:
ffffc90001e4f6f8 RDI:
0000000000000000
<4> [299.836401] RBP:
ffffc90001e4f6f8 R08:
00000000000001b0 R09:
ffff888116172528
<4> [299.836403] R10:
0000000000000001 R11:
00000000a4cb2e51 R12:
ffffc90001e4fa90
<4> [299.836406] R13:
ffff888116172528 R14:
ffff888130d7f4b0 R15:
ffff888130d7f400
<4> [299.836409] FS:
00007ff241684500(0000) GS:
ffff88849fe80000(0000) knlGS:
0000000000000000
<4> [299.836412] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
<4> [299.836416] CR2:
00000000000000c8 CR3:
0000000107b80001 CR4:
0000000000770ee0
<4> [299.836418] PKRU:
55555554
<4> [299.836420] Call Trace:
<4> [299.836422] <TASK>
<4> [299.836423] i915_ttm_buddy_man_alloc+0x68/0x240 [i915]
ttm_resource_init() now needs to access the bo->bdev, and also wants to
store the bo reference. Try to keep both working. The mock_bo is a hack
so we can interface directly with the ttm managers alloc() and free() hooks for
our mock testing, without invoking other TTM features like eviction,
moves, etc.
v2: make sure we only touch res->bo if the alloc() returns successfully
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5123
Fixes:
0e05fc49c358 ("drm/ttm: add common accounting to the resource mgr v3")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221121103.2473831-1-matthew.auld@intel.com
Tvrtko Ursulin [Fri, 25 Feb 2022 13:44:44 +0000 (13:44 +0000)]
Merge drm/drm-next into drm-intel-gt-next
Matt needed some buddy allocator changes for landing DG2 small BAR
support patches.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
José Roberto de Souza [Wed, 23 Feb 2022 19:49:46 +0000 (11:49 -0800)]
drm/i915: Check stolen memory size before calling drm_mm_init
Add check for zero usable stolen memory before calling drm_mm_init
to support configurations where stolen memory exists but is fully
reserved.
Also skip memory test in cases that usable stolen is smaller than
page size(amount mapped and used to test memory).
v2:
- skiping test if available memory is smaller than page size (Lucas)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Steve Carbonari <steven.carbonari@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223194946.725328-1-jose.souza@intel.com
Dave Airlie [Thu, 24 Feb 2022 19:30:17 +0000 (05:30 +1000)]
Merge tag 'drm-misc-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
Dave Airlie [Thu, 24 Feb 2022 06:59:17 +0000 (16:59 +1000)]
Merge tag 'drm-intel-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Linux core:
-----------
iosys-map: Add offset to iosys_map_memcpy_to() (Lucas)
iosys-map: Add a few more helpers (Lucas)
i915 (display and core changes on drm-intel-next):
--------------------------------------------------
- Display's DBuf and watermark related fixes and improvements (Ville)
- More i915 header and other code clean-up (Jani)
- Display IPS fixes and improvements (Ville)
- OPRegion fixes and cleanups (Jani)
- Fix the plane end Y offset check for FBC (Ville)
- DP 128b/132b updates (Jani)
- Disable runtime pm wakeref tracking for the mock device selftest (Ville)
- Many display code clean-up while targeting to fix up DP DFP 4:2:0 handling (Ville)
- Bigjoiner state tracking and more bigjoiner related work (Ville)
- Update DMC_DEBUG3 register for DG1 (Chuansheng)
- SAGV fixes (Ville)
- More GT register cleanup (Matt)
- Fix build issue when using clang (Tong)
- Display DG2 fixes (Matt)
- ADL-P PHY related fixes (Imre)
- PSR2 fixes (Jose)
- Add PCH Support for Alder Lake N (Tejas)
drm-intel-gt-next (drm-intel-gt-next-2022-02-17):
-------------------------------------------------
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YhbDan8wNZBR6FzF@intel.com
Rodrigo Vivi [Wed, 23 Feb 2022 19:19:43 +0000 (14:19 -0500)]
Merge tag 'drm-intel-gt-next-2022-02-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch
from drm-rerere's
1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip
rerere cache update")]
José Roberto de Souza [Fri, 18 Feb 2022 21:03:30 +0000 (13:03 -0800)]
drm/i915/rps/tgl+: Remove RPS interrupt support
TGL+ and newer platforms don't support RPS up and low interruption
limits.
It is not used for broadwell and newer plaforms that supports
execlist but here making sure that it is explicit not used even in
debug scenarios.
BSpec: 33301
BSpec: 52069
BSpec: 9520
HSD:
1405911647
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218210330.48653-1-jose.souza@intel.com
José Roberto de Souza [Tue, 22 Feb 2022 14:14:24 +0000 (06:14 -0800)]
drm/i915/tgl: Simply subplatform detection
In the past we had a need to differentiate TGL U and TGL Y, there
was a different voltage swing table for each subplatform and some PCI
ids of this subplatforms are shared but it turned out that it was a
specification mistake and the voltage swing table was indeed the same
but we went ahead with that patch because we needed to differentiate
TGL U and Y from TGL H and by that time TGL H was embargoed so that
was the perfect way to land it upstream.
Now the embargo for TGL H is long past and now we even have
INTEL_TGL_12_GT1_IDS with all TGL H ids, so we can drop this PCI root
check and only rely in the PCI ids to differentiate TGL U and Y from
TGL H that actually has code differences.
Besides the simplification this will fix issues in virtualization
environments where the PCI root is virtualized and don't have the same
id as actual hardware.
v2:
- add and set INTEL_SUBPLATFORM_UY
Cc: Fred Gao <fred.gao@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222141424.35165-1-jose.souza@intel.com
Ville Syrjälä [Fri, 18 Feb 2022 06:40:39 +0000 (08:40 +0200)]
drm/i915: Extract intel_bw_check_data_rate()
Extract the data rate calculation loop out from
intel_bw_atomic_check() to make it a bit less confusing.
v2: Deal with 'bool changed'
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-7-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 18 Feb 2022 06:40:38 +0000 (08:40 +0200)]
drm/i915: Extract icl_qgv_points_mask()
Declutter intel_bw_atomic_check() a bit by pulling
the max QGV mask calculation out.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-6-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Ville Syrjälä [Thu, 17 Feb 2022 10:32:21 +0000 (12:32 +0200)]
drm/i915: Properly clear crtc state when disabling it fully, again
Currently we just leave the old gunk lying around in the crtc
state when userspace asks us to fully disable the crtc. That
doesn't match what the state would be had we never even enabled
the crtc in the first place. So let's make this consistent and
call intel_crtc_prepare_cleared_state() for disabled crtcs as well
(excluding bigjoiner slaves of course which have had their state
copied from the master).
I actually already did this once in commit
fff13e63a141 ("drm/i915:
Clear most of crtc state when disabling the crtc") but then
commit
19f65a3dbf75 ("drm/i915: Try to make bigjoiner work in atomic
check") undid it all :(
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Ville Syrjälä [Thu, 17 Feb 2022 10:32:20 +0000 (12:32 +0200)]
drm/i915: Remove odd any_ms=true assignment
For some reason we're flagging that we need to run through the
full modeset calculations (any_ms==true -> do cdclk/etc. checks)
if any crtc got initially flagged for a modeset and is not
enabled via the uapi. No idea why this is here since later on
(after all fastset handling) we do full run through the crtcs
and flag any_ms if anything still needs a full modeset. So let's
just throw out this early weirdo.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-4-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Ville Syrjälä [Thu, 17 Feb 2022 10:32:19 +0000 (12:32 +0200)]
drm/i915: Dump hw.enable and pipe_mode
Include hw.enable and pipe_mode in the crtc debugfs state dump.
These are fairly fundemental to the operation of the driver
so not seeing them leaves us in the dark.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Ville Syrjälä [Thu, 17 Feb 2022 10:32:18 +0000 (12:32 +0200)]
drm/i915: Dump the crtc hw state always
Let's just dump the "full" hw crtc state in debugs so that we can
see if some stale junk was left behind when the crtc is supposed
to be entirely off.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Arunpravin [Tue, 22 Feb 2022 17:48:45 +0000 (23:18 +0530)]
drm/selftests: add drm buddy pathological testcase
create a pot-sized mm, then allocate one of each possible
order within. This should leave the mm with exactly one
page left. Free the largest block, then whittle down again.
Eventually we will have a fully 50% fragmented mm.
v2(Matthew Auld):
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-7-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Arunpravin [Tue, 22 Feb 2022 17:48:44 +0000 (23:18 +0530)]
drm/selftests: add drm buddy smoke testcase
- add a test to ascertain that the critical functionalities
of the program is working fine
- add a timeout helper function
v2:
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-6-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Arunpravin [Tue, 22 Feb 2022 17:48:43 +0000 (23:18 +0530)]
drm/selftests: add drm buddy pessimistic testcase
create a pot-sized mm, then allocate one of each possible
order within. This should leave the mm with exactly one
page left.
v2:
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-5-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Arunpravin [Tue, 22 Feb 2022 17:48:42 +0000 (23:18 +0530)]
drm/selftests: add drm buddy optimistic testcase
create a mm with one block of each order available, and
try to allocate them all.
v2(Matthew Auld):
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-4-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Arunpravin [Tue, 22 Feb 2022 17:48:41 +0000 (23:18 +0530)]
drm/selftests: add drm buddy alloc range testcase
- add a test to check the range allocation
- export get_buddy() function in drm_buddy.c
- export drm_prandom_u32_max_state() in lib/drm_random.c
- include helper functions
- include prime number header file
v2:
- add drm_get_buddy() function description (Matthew Auld)
- removed unnecessary test succeeded print
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-3-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Arunpravin [Tue, 22 Feb 2022 17:48:40 +0000 (23:18 +0530)]
drm/selftests: add drm buddy alloc limit testcase
add a test to check the maximum allocation limit
v2(Matthew Auld):
- added err = -EINVAL in block NULL check
- removed unnecessary test succeeded print
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-2-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Arunpravin [Tue, 22 Feb 2022 17:48:39 +0000 (23:18 +0530)]
drm/selftests: Move i915 buddy selftests into drm
- move i915 buddy selftests into drm selftests folder
- add Makefile and Kconfig support
- add sanitycheck testcase
Prerequisites
- These series of selftests patches are created on top of
drm buddy series
- Enable kselftests for DRM as a module in .config
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Jiawei Gu [Tue, 22 Feb 2022 09:42:52 +0000 (17:42 +0800)]
drm/sched: Add device pointer to drm_gpu_scheduler
Add device pointer so scheduler's printing can use
DRM_DEV_ERROR() instead, which makes life easier under multiple GPU
scenario.
v2: amend all calls of drm_sched_init()
v3: fill dev pointer for all drm_sched_init() calls
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095705.5290-1-Jiawei.Gu@amd.com
Ville Syrjälä [Wed, 23 Feb 2022 08:18:10 +0000 (10:18 +0200)]
Revert "drm/i915/display/vrr: Reset VRR capable property on a long hpd"
This reverts commit
9bc34b4d0f3cb368241684cc5e0445d435dded44.
Just oopses on most machines.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223081810.19917-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tejas Upadhyay [Thu, 27 Jan 2022 10:35:20 +0000 (16:05 +0530)]
drm/i915/adl-n: Add PCH Support for Alder Lake N
Add the PCH ID for ADL-N.
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127103520.348015-1-tejaskumarx.surendrakumar.upadhyay@intel.com
Manasi Navare [Tue, 15 Feb 2022 20:26:01 +0000 (12:26 -0800)]
drm/i915/display/vrr: Reset VRR capable property on a long hpd
With some VRR panels, user can turn VRR ON/OFF on the fly from the panel settings.
When VRR is turned OFF ,sends a long HPD to the driver clearing the Ignore MSA bit
in the DPCD. Currently the driver parses that onevery HPD but fails to reset
the corresponding VRR Capable Connector property.
Hence the userspace still sees this as VRR Capable panel which is incorrect.
Fix this by explicitly resetting the connector property.
v2: Reset vrr capable if status == connector_disconnected
v3: Use i915 and use bool vrr_capable (Jani Nikula)
v4: Move vrr_capable to after update modes call (Jani N)
Remove the redundant comment (Jan N)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215202601.22943-1-manasi.d.navare@intel.com
Vinay Belgaumkar [Thu, 17 Feb 2022 19:15:25 +0000 (11:15 -0800)]
drm/i915/guc/slpc: Use wrapper for reading RP_STATE_CAP
This will ensure correct values for Gen12+ platforms.
v2: Rebase
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216181504.7155-1-vinay.belgaumkar@intel.com
Vinay Belgaumkar [Wed, 16 Feb 2022 18:15:04 +0000 (10:15 -0800)]
drm/i915/guc/slpc: Correct the param count for unset param
SLPC unset param H2G only needs one parameter - the id of the
param.
Fixes:
025cb07bebfa ("drm/i915/guc/slpc: Cache platform frequency limits")
Suggested-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216181504.7155-1-vinay.belgaumkar@intel.com
Tejas Upadhyay [Thu, 17 Feb 2022 12:32:23 +0000 (18:02 +0530)]
drm/i915/gt: use get_reset_domain() helper
We dont need to implement reset_domain in intel_engine
_setup(), but can be done as a helper. Implemented as
engine->reset_domain = get_reset_domain().
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217123223.748184-1-tejaskumarx.surendrakumar.upadhyay@intel.com
Arunpravin [Mon, 21 Feb 2022 16:45:50 +0000 (22:15 +0530)]
drm: implement a method to free unused pages
On contiguous allocation, we round up the size
to the *next* power of 2, implement a function
to free the unused pages after the newly allocate block.
v2(Matthew Auld):
- replace function name 'drm_buddy_free_unused_pages' with
drm_buddy_block_trim
- replace input argument name 'actual_size' with 'new_size'
- add more validation checks for input arguments
- add overlaps check to avoid needless searching and splitting
- merged the below patch to see the feature in action
- add free unused pages support to i915 driver
- lock drm_buddy_block_trim() function as it calls mark_free/mark_split
are all globally visible
v3(Matthew Auld):
- remove trim method error handling as we address the failure case
at drm_buddy_block_trim() function
v4:
- in case of trim, at __alloc_range() split_block failure path
marks the block as free and removes it from the original list,
potentially also freeing it, to overcome this problem, we turn
the drm_buddy_block_trim() input node into a temporary node to
prevent recursively freeing itself, but still retain the
un-splitting/freeing of the other nodes(Matthew Auld)
- modify the drm_buddy_block_trim() function return type
v5(Matthew Auld):
- revert drm_buddy_block_trim() function return type changes in v4
- modify drm_buddy_block_trim() passing argument n_pages to original_size
as n_pages has already been rounded up to the next power-of-two and
passing n_pages results noop
v6:
- fix warnings reported by kernel test robot <lkp@intel.com>
v7:
- modify drm_buddy_block_trim() function doc description
- at drm_buddy_block_trim() handle non-allocated block as
a serious programmer error
- fix a typo
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221164552.2434-3-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Arunpravin [Mon, 21 Feb 2022 16:45:49 +0000 (22:15 +0530)]
drm: implement top-down allocation method
Implemented a function which walk through the order list,
compares the offset and returns the maximum offset block,
this method is unpredictable in obtaining the high range
address blocks which depends on allocation and deallocation.
for instance, if driver requests address at a low specific
range, allocator traverses from the root block and splits
the larger blocks until it reaches the specific block and
in the process of splitting, lower orders in the freelist
are occupied with low range address blocks and for the
subsequent TOPDOWN memory request we may return the low
range blocks.To overcome this issue, we may go with the
below approach.
The other approach, sorting each order list entries in
ascending order and compares the last entry of each
order list in the freelist and return the max block.
This creates sorting overhead on every drm_buddy_free()
request and split up of larger blocks for a single page
request.
v2:
- Fix alignment issues(Matthew Auld)
- Remove unnecessary list_empty check(Matthew Auld)
- merged the below patch to see the feature in action
- add top-down alloc support to i915 driver
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221164552.2434-2-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Arunpravin [Mon, 21 Feb 2022 16:45:48 +0000 (22:15 +0530)]
drm: improve drm_buddy_alloc function
- Make drm_buddy_alloc a single function to handle
range allocation and non-range allocation demands
- Implemented a new function alloc_range() which allocates
the requested power-of-two block comply with range limitations
- Moved order computation and memory alignment logic from
i915 driver to drm buddy
v2:
merged below changes to keep the build unbroken
- drm_buddy_alloc_range() becomes obsolete and may be removed
- enable ttm range allocation (fpfn / lpfn) support in i915 driver
- apply enhanced drm_buddy_alloc() function to i915 driver
v3(Matthew Auld):
- Fix alignment issues and remove unnecessary list_empty check
- add more validation checks for input arguments
- make alloc_range() block allocations as bottom-up
- optimize order computation logic
- replace uint64_t with u64, which is preferred in the kernel
v4(Matthew Auld):
- keep drm_buddy_alloc_range() function implementation for generic
actual range allocations
- keep alloc_range() implementation for end bias allocations
v5(Matthew Auld):
- modify drm_buddy_alloc() passing argument place->lpfn to lpfn
as place->lpfn will currently always be zero for i915
v6(Matthew Auld):
- fixup potential uaf - If we are unlucky and can't allocate
enough memory when splitting blocks, where we temporarily
end up with the given block and its buddy on the respective
free list, then we need to ensure we delete both blocks,
and no just the buddy, before potentially freeing them
- fix warnings reported by kernel test robot <lkp@intel.com>
v7(Matthew Auld):
- revert fixup potential uaf
- keep __alloc_range() add node to the list logic same as
drm_buddy_alloc_blocks() by having a temporary list variable
- at drm_buddy_alloc_blocks() keep i915 range_overflows macro
and add a new check for end variable
v8:
- fix warnings reported by kernel test robot <lkp@intel.com>
v9(Matthew Auld):
- remove DRM_BUDDY_RANGE_ALLOCATION flag
- remove unnecessary function description
v10:
- keep DRM_BUDDY_RANGE_ALLOCATION flag as removing the flag
and replacing with (end < size) logic fails amdgpu driver load
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221164552.2434-1-Arunpravin.PaneerSelvam@amd.com
Imre Deak [Fri, 18 Feb 2022 12:26:11 +0000 (14:26 +0200)]
drm/i915/adlp: Add TypeC PHY TBT->DP-alt/legacy mode switch workaround
Add display workaround #
1309179469 , which fixes a PHY hang when
switching from TBT mode to DP-alt/legacy mode. The workaround also
requires an IFWI/PHY firmware change, before that this change has no
effect (the DKL_PCS_DW5/SOFTRESET flag is always cleared).
HSDES:
18018237866
HSDES:
16014473319
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218122611.767974-1-imre.deak@intel.com
Jani Nikula [Mon, 14 Feb 2022 17:36:44 +0000 (19:36 +0200)]
drm/i915/pxp: prefer forward declaration over includes
Always use forward declarations instead of includes in headers if
possible.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214173644.2097124-1-jani.nikula@intel.com
Jani Nikula [Thu, 17 Feb 2022 22:40:23 +0000 (00:40 +0200)]
drm/i915/reg: split out icl_dsi_regs.h
The ICL DSI registers have fairly isolated usage. Split the register
macros to a separate file.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-4-jani.nikula@intel.com
Jani Nikula [Thu, 17 Feb 2022 22:40:22 +0000 (00:40 +0200)]
drm/i915/reg: split out vlv_dsi_regs.h and vlv_dsi_pll_regs.h
The VLV (including CHV, BXT, and GLK) DSI registers have fairly isolated
usage. Split the register macros to separated files.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-3-jani.nikula@intel.com
Jani Nikula [Thu, 17 Feb 2022 22:40:21 +0000 (00:40 +0200)]
drm/i915/dsi: add separate init timer mask definition for ICL DSI
Having a separate definition will be useful for splitting VLV and ICL
register files.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-2-jani.nikula@intel.com
Jani Nikula [Thu, 17 Feb 2022 22:40:20 +0000 (00:40 +0200)]
drm/i915/dsi: disassociate VBT video transfer mode from register values
The VBT DSI video transfer mode field values have been defined in terms
of the VLV MIPI_VIDEO_MODE_FORMAT register. The ICL DSI code maps that
to ICL DSI_TRANS_FUNC_CONF() register. The values are the same, though
the shift is different.
Make a clean break and disassociate the values from each other. Assume
the values can be different, and translate the VBT value to VLV and ICL
register values as needed. Use the existing macros from intel_bios.h.
This will be useful in splitting the DSI register macros to files by DSI
implementation.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-1-jani.nikula@intel.com
Ville Syrjälä [Fri, 18 Feb 2022 10:03:58 +0000 (12:03 +0200)]
drm/vc4: Use drm_mode_copy()
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-18-ville.syrjala@linux.intel.com
Dave Airlie [Sun, 20 Feb 2022 23:43:02 +0000 (09:43 +1000)]
Merge tag 'amd-drm-next-5.18-2022-02-18' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.18-2022-02-18:
amdgpu:
- kerneldoc fixes
- Expose IP discovery data via sysfs
- RAS rework
- SRIOV fixes
- Display FP fix
- RDNA2 SMU fixes
- Display DSC fixes
- Cyan Skillfish update
- GC 10.3.7 updates
- SDMA 5.2.7 updates
- DCN 3.1.6 updates
- Fix ASPM handling
- GC 10.3.6 updates
amdkfd:
- SPDX header cleanups
- SDMA queue handling fixes
- Misc fixes
radeon:
- iMac backlight fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218180920.5754-1-alexander.deucher@amd.com
Linus Walleij [Mon, 3 Jan 2022 11:38:22 +0000 (12:38 +0100)]
drm/panel: nt35560: Support also ACX424AKM
Add some code and config to also support the ACX424AKM used in
some Sony (Ericsson) Mobile phones.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220103113822.654592-3-linus.walleij@linaro.org
Linus Walleij [Mon, 3 Jan 2022 11:38:21 +0000 (12:38 +0100)]
drm/panel: nt35560: Support more panel IDs
These IDs were found in the wild in a Sony Xperia vendor tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220103113822.654592-2-linus.walleij@linaro.org
Linus Walleij [Mon, 3 Jan 2022 11:38:20 +0000 (12:38 +0100)]
drm/panel: Rename Sony ACX424 to Novatek NT35560
A code drop from Sony Mobile reveals that the ACX424 panels are
built around the Novatek NT35560 panel controllers so just bite
the bullet and rename the driver and all basic symbols so that
we can modify this driver to cover any other panels also using
the Novatek NT35560 display controller.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220103113822.654592-1-linus.walleij@linaro.org
Abdiel Janulgue [Fri, 18 Feb 2022 18:47:51 +0000 (00:17 +0530)]
drm/i915/lmem: Enable lmem for platforms with Flat CCS
A portion of device memory is reserved for Flat CCS so usable
device memory will be reduced by size of Flat CCS. Size of
Flat CCS is specified in “XEHPSDV_FLAT_CCS_BASE_ADDR”.
So to get effective device memory we need to subtract
total device memory by Flat CCS memory size.
v2:
Addressed the small bar related issue [Matt]
Removed a reduntant check [Matt]
v3:
removed a variable
s/DRM_ERROR/drm_err [Lucas]
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218184752.7524-15-ramalingam.c@intel.com
CQ Tang [Fri, 18 Feb 2022 18:47:50 +0000 (00:17 +0530)]
drm/i915/xehpsdv: Add has_flat_ccs to device info
Platforms of XeHP and beyond support 3D surface (buffer) compression and
various compression formats. This is accomplished by an additional
compression control state (CCS) stored for each surface.
Gen 12 devices(TGL family and DG1) stores compression states in a separate
region of memory. It is managed by user-space and has an associated set of
user-space managed page tables used by hardware for address translation.
In Xe HP and beyond (XEHPSDV, DG2, etc), there is a new feature introduced
i.e Flat CCS. It replaced AUX page tables with a flat indexed region of
device memory for storing compression states.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218184752.7524-14-ramalingam.c@intel.com
Matthew Auld [Fri, 18 Feb 2022 18:47:49 +0000 (00:17 +0530)]
drm/i915/uapi: document behaviour for DG2 64K support
On discrete platforms like DG2, we need to support a minimum page size
of 64K when dealing with device local-memory. This is quite tricky for
various reasons, so try to document the new implicit uapi for this.
v4: Kdoc modification.
v3: fix typos and less emphasis
v2: Fixed suggestions on formatting [Daniel]
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
cc: Simon Ser <contact@emersion.fr>
cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-dev@lists.freedesktop.org
Cc: Tony Ye <tony.ye@intel.com>
Cc: Slawomir Milczarek <slawomir.milczarek@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218184752.7524-13-ramalingam.c@intel.com
Matthew Auld [Fri, 18 Feb 2022 18:47:48 +0000 (00:17 +0530)]
drm/i915/migrate: add acceleration support for DG2
This is all kinds of awkward since we now have to contend with using 64K
GTT pages when mapping anything in LMEM(including the page-tables
themselves).
v2(Ram)
- Document the ppGTT layout and add a better description for the
different windows.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218184752.7524-12-ramalingam.c@intel.com
Matthew Auld [Fri, 18 Feb 2022 18:47:47 +0000 (00:17 +0530)]
drm/i915/gtt: add xehpsdv_ppgtt_insert_entry
If this is LMEM then we get a 32 entry PT, with each PTE pointing to
some 64K block of memory, otherwise it's just the usual 512 entry PT.
This very much assumes the caller knows what they are doing.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218184752.7524-11-ramalingam.c@intel.com
Matthew Auld [Fri, 18 Feb 2022 18:47:46 +0000 (00:17 +0530)]
drm/i915/gtt: allow overriding the pt alignment
On some platforms we have alignment restrictions when accessing LMEM
from the GTT. In the next few patches we need to be able to modify the
page-tables directly via the GTT itself.
Suggested-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218184752.7524-10-ramalingam.c@intel.com
Robert Beckett [Fri, 18 Feb 2022 18:47:45 +0000 (00:17 +0530)]
drm/i915: add gtt misalignment test
add test to check handling of misaligned offsets and sizes
v4:
* remove spurious blank lines
* explicitly cast intel_region_id to intel_memory_type in misaligned_pin
Reported-by: kernel test robot <lkp@intel.com>
v6:
* use NEEDS_COMPACT_PT instead of hard coding for DG2
v7:
* use i915_vma_unbind_unlocked in misalignment test
v8:
* handle stolen smem region returning -ENODEV due to
uninitialized on some setups
* avoid trying to test bad alignments on single page hole regions
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218184752.7524-9-ramalingam.c@intel.com
Matthew Auld [Fri, 18 Feb 2022 18:47:44 +0000 (00:17 +0530)]
drm/i915: support 64K GTT pages for discrete cards
discrete cards optimise 64K GTT pages for local-memory, since everything
should be allocated at 64K granularity. We say goodbye to sparse
entries, and instead get a compact 256B page-table for 64K pages,
which should be more cache friendly. 4K pages for local-memory
are no longer supported by the HW.
v4: don't return uninitialized err in igt_ppgtt_compact
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218184752.7524-8-ramalingam.c@intel.com
Matthew Auld [Fri, 18 Feb 2022 18:47:43 +0000 (00:17 +0530)]
drm/i915: enforce min GTT alignment for discrete cards
For local-memory objects we need to align the GTT addresses
to 64K, both for the ppgtt and ggtt.
We need to support vm->min_alignment > 4K, depending
on the vm itself and the type of object we are inserting.
With this in mind update the GTT selftests to take this
into account.
For compact-pt we further align and pad lmem object GTT addresses
to 2MB to ensure PDEs contain consistent page sizes as
required by the HW.
v3:
* use needs_compact_pt flag to discriminate between
64K and 64K with compact-pt
* add i915_vm_obj_min_alignment
* use i915_vm_obj_min_alignment to round up vma reservation
if compact-pt instead of hard coding
v5:
* fix i915_vm_obj_min_alignment for internal objects which
have no memory region
v6:
* tiled_blits_create correctly pick largest required alignment
v8:
* i915_vm_min_alignment protect against array overflow for mock region
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218184752.7524-7-ramalingam.c@intel.com
Ramalingam C [Fri, 18 Feb 2022 18:47:42 +0000 (00:17 +0530)]
drm/i915: add needs_compact_pt flag
Add a new platform flag, needs_compact_pt, to mark the requirement of
compact pt layout support for the ppGTT when using 64K GTT pages.
With this flag has_64k_pages will only indicate requirement of 64K
GTT page sizes or larger for device local memory access.
v6:
* minor doc formatting
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218184752.7524-6-ramalingam.c@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:33 +0000 (09:41 -0800)]
iosys-map: Add a few more helpers
First the simplest ones:
- iosys_map_memset(): when abstracting system and I/O memory,
just like the memcpy() use case, memset() also has dedicated
functions to be called for using IO memory.
- iosys_map_memcpy_from(): we may need to copy data from I/O
memory, not only to.
In certain situations it's useful to be able to read or write to an
offset that is calculated by having the memory layout given by a struct
declaration. Usually we are going to read/write a u8, u16, u32 or u64.
As a pre-requisite for the implementation, add iosys_map_memcpy_from()
to be the equivalent of iosys_map_memcpy_to(), but in the other
direction. Then add 2 pairs of macros:
- iosys_map_rd() / iosys_map_wr()
- iosys_map_rd_field() / iosys_map_wr_field()
The first pair takes the C-type and offset to read/write. The second
pair uses a struct describing the layout of the mapping in order to
calculate the offset and size being read/written.
We could use readb, readw, readl, readq and the write* counterparts,
however due to alignment issues this may not work on all architectures.
If alignment needs to be checked to call the right function, it's not
possible to decide at compile-time which function to call: so just leave
the decision to the memcpy function that will do exactly that.
Finally, in order to use the above macros with a map derived from
another, add another initializer: IOSYS_MAP_INIT_OFFSET().
v2:
- Rework IOSYS_MAP_INIT_OFFSET() so it doesn't rely on aliasing rules
within the union
- Add offset to both iosys_map_rd_field() and iosys_map_wr_field() to
allow the struct itself to be at an offset from the mapping
- Add documentation to iosys_map_rd_field() with example and expected
memory layout
v3:
- Drop kernel.h include as it's not needed anymore
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-3-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:32 +0000 (09:41 -0800)]
iosys-map: Add offset to iosys_map_memcpy_to()
In certain situations it's useful to be able to write to an
offset of the mapping. Add a dst_offset to iosys_map_memcpy_to().
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-2-lucas.demarchi@intel.com
Lucas De Marchi [Thu, 17 Feb 2022 17:56:34 +0000 (09:56 -0800)]
drm/i915: Kill the fake lmem support
This was useful for early development of lmem, but it's not used
anymore, so remove it.
v2: Remove unneeded fields from struct intel_memory_region
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217175634.4128754-1-lucas.demarchi@intel.com
Matt Roper [Fri, 18 Feb 2022 01:03:28 +0000 (17:03 -0800)]
drm/i915/dg2: Enable 5th port
DG2 supports a 5th display output which the hardware refers to as "TC1,"
even though it isn't a Type-C output. This behaves similarly to the TC1
on past platforms with just a couple minor differences:
* DG2's TC1 bit in SDEISR is at bit 25 rather than 24 as it is on
ICP/TGP/ADP.
* DG2 doesn't need the hpd inversion setting that we had to use on DG1
v2:
intel_ddi_init(dev_priv, PORT_TC1); [Matt]
Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218010328.183423-3-lucas.demarchi@intel.com
Matt Roper [Fri, 18 Feb 2022 01:03:27 +0000 (17:03 -0800)]
drm/i915/dg2: Drop 38.4 MHz MPLLB tables
Our early understanding of DG2 was incorrect; since the 5th display
isn't actually a Type-C output, 38.4 MHz input clocks are never used on
this platform and we can drop the corresponding MPLLB tables.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218010328.183423-2-lucas.demarchi@intel.com
Jouni Högander [Fri, 18 Feb 2022 01:03:26 +0000 (17:03 -0800)]
drm/i915: Fix for PHY_MISC_TC1 offset
Currently ICL_PHY_MISC macro is returning offset 0x64C10 for PHY_E.
The PORT_TC1 port is not yet enabled properly in the driver, but
intel_phy_snps.c is relying on intel_phy_is_snps() to filter out
unavailable phys. That function was already considering the last phy as
available. Just correct the offset of the last phy to 0x64C14 as the
rest of the support for it is coming on next commits.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218010328.183423-1-lucas.demarchi@intel.com
Ville Syrjälä [Fri, 18 Feb 2022 06:40:37 +0000 (08:40 +0200)]
drm/i915: Pimp icl+ sagv pre/post update
Add some debugs on what exactly we're doing to the QGV point mask
in the icl+ sagv pre/post plane update hooks. Currently we're just
guessing.
v2: s/u32/u16/ for consistency with the mask sizes (Stan)
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-5-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 18 Feb 2022 06:40:36 +0000 (08:40 +0200)]
drm/i915: Split pre-icl vs. icl+ SAGV hooks apart
To further reduce the confusion between the pre-icl vs. icl+
SAGV codepaths let's do a full split.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-4-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 18 Feb 2022 06:40:35 +0000 (08:40 +0200)]
drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV
If the only thing that is changing is SAGV vs. no SAGV but
the number of active planes and the total data rates end up
unchanged we currently bail out of intel_bw_atomic_check()
early and forget to actually compute the new WGV point
mask and thus won't actually enable/disable SAGV as requested.
This ends up poorly if we end up running with SAGV enabled
when we shouldn't. Usually ends up in underruns.
To fix this let's go through the QGV point mask computation
if either the data rates/number of planes, or the state
of SAGV is changing.
v2: Check more carefully if things are changing to avoid
the extra calculations/debugs from introducing unwanted
overhead
Cc: stable@vger.kernel.org
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v1
Fixes:
20f505f22531 ("drm/i915: Restrict qgv points which don't have enough bandwidth.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-3-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 18 Feb 2022 06:40:34 +0000 (08:40 +0200)]
drm/i915: Correctly populate use_sagv_wm for all pipes
When changing between SAGV vs. no SAGV on tgl+ we have to
update the use_sagv_wm flag for all the crtcs or else
an active pipe not already in the state will end up using
the wrong watermarks. That is especially bad when we end up
with the tighter non-SAGV watermarks with SAGV enabled.
Usually ends up in underruns.
Cc: stable@vger.kernel.org
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes:
7241c57d3140 ("drm/i915: Add TGL+ SAGV support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-2-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 2 Feb 2022 11:16:16 +0000 (13:16 +0200)]
drm/i915: Drop pointless i830 PIPECONF read
Reading the PIPECONF enable bit out from the hardware
in i9xx_set_pipeconf() on i830 is pointless as the bit should
always be set since we keep both pipes constantly running on
i830. Drop the pointless read and just always keep the bit set.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-4-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Ville Syrjälä [Wed, 2 Feb 2022 11:16:15 +0000 (13:16 +0200)]
drm/i915: Make the CHV CGM CSC register writes lockless
The CHV CGM CSC registers are single buffered and so we
may have to write them from the vblank worker, which
imposes very tight dealines. Drop the pointless locking
for the register accessess to reduce the overhead.
All the other registers we bash from the vblank worker
(LUTs) were already made lockless earlier.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-3-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Ville Syrjälä [Wed, 2 Feb 2022 11:16:14 +0000 (13:16 +0200)]
drm/i915: Make the pipe/output CSC register writes lockless
The pipe/output CSC register writes don't need to be locked
since all the registers are suitably isolated to their own
cachelines. So eliminate the locks to reduce the overhead
during the vblank evade critical section.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Ville Syrjälä [Wed, 2 Feb 2022 11:16:13 +0000 (13:16 +0200)]
drm/i915: Move PIPE_CHICKEN RMW out from the vblank evade critical section
We don't want any RMWs in the part of the commit that happens
under vblank evasion. Eventually we want to use the DSB to
handle that and it can't read registers at all. Also reads
are just slowing us down needlessly.
Let's move the whole PIPE_CHICKEN stuff out from the critical
section since we don't have anything there that needs to be
syncrhonized with other plane/pipe registers. If we ever need
to add such things then we have to move it back, but without
doing any reads.
TODO: should look into eliminating the RMW anyway...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202111616.1579-1-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
José Roberto de Souza [Thu, 10 Feb 2022 18:52:23 +0000 (10:52 -0800)]
drm/i915/display: Implement Wa_16013835468
PSR2 workaround required when mode has delayed vblank.
BSpec: 52890
BSpec: 49421
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210185223.95399-2-jose.souza@intel.com
José Roberto de Souza [Thu, 10 Feb 2022 18:52:22 +0000 (10:52 -0800)]
drm/i915/display: Group PSR2 prog sequences and workarounds
Grouping inside of the same if all the programing sequences and
workarounds of PSR2.
The order of programing changed in intel_psr_enable_source() but
it will not affect PSR2 as at this point PSR2_ENABLE is still disabled.
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210185223.95399-1-jose.souza@intel.com
José Roberto de Souza [Wed, 16 Feb 2022 13:40:59 +0000 (05:40 -0800)]
drm/i915/display/tgl+: Implement new PLL programming step
A new programming step was added to combo and TC PLL sequences.
If override_AFC_startup is set in VBT, driver should overwrite
AFC_startup value to 0x0 or 0x7 in PLL's div0 register.
The current understating is that only TGL needs this and all other
display 12 and newer platforms will have a older VBT or a newer VBT
with override_AFC_startup set to 0 but in any case there is a
drm_warn_on_once() to let us know if this is not true.
v2:
- specification updated, now AFC can be override to 0x0 or 0x7
- not using a union for div0 (Imre)
- following previous wrong vbt naming: bits instead of bytes (Imre)
BSpec: 49204
BSpec: 20122
BSpec: 49968
BSpec: 71360
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216134059.25348-1-jose.souza@intel.com
Imre Deak [Thu, 17 Feb 2022 15:22:37 +0000 (17:22 +0200)]
drm/i915: Disconnect PHYs left connected by BIOS on disabled ports
BIOS may leave a TypeC PHY in a connected state even though the
corresponding port is disabled. This will prevent any hotplug events
from being signalled (after the monitor deasserts and then reasserts its
HPD) until the PHY is disconnected and so the driver will not detect a
connected sink. Rebooting with the PHY in the connected state also
results in a system hang.
Fix the above by disconnecting TypeC PHYs on disabled ports.
Before commit
64851a32c463e5 the PHY connected state was read out even
for disabled ports and later the PHY got disconnected as a side effect
of a tc_port_lock/unlock() sequence (during connector probing), hence
recovering the port's hotplug functionality.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5014
Fixes:
64851a32c463 ("drm/i915/tc: Add a mode for the TypeC PHY's disconnected state")
Cc: <stable@vger.kernel.org> # v5.16+
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217152237.670220-1-imre.deak@intel.com
Jani Nikula [Thu, 17 Feb 2022 08:39:38 +0000 (10:39 +0200)]
drm/i915/dp: remove accidental static on what should be a local variable
The variable should obviously be local, not static.
Fixes:
a421d8a99216 ("drm/i915/dp: rewrite DP 2.0 128b/132b link training based on errata")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217083938.3587465-1-jani.nikula@intel.com
Ville Syrjälä [Wed, 16 Feb 2022 23:28:06 +0000 (01:28 +0200)]
drm/i915: Polish ilk+ wm register bits
Use REG_GENMASK() & co. for ilk+ watermark registers.
v2: Stick to the current bitmask sizes (Jani)
Fix "watermarm" typo (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216232806.6194-4-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 16 Feb 2022 23:28:04 +0000 (01:28 +0200)]
drm/i915: Introduce intel_crtc_planes_update_arm()
No reason the high level intel_update_crtc() needs to know
that there is something magical about the commit order of
planes between different platforms. So let's hide that
detail even better.
In order to keep to somewhat consistent naming between
things we shall call this intel_crtc_planes_update_arm()
to match the plane->update_arm() vfunc naming convention.
And let's rename the noarm counterpart to
intel_crtc_planes_update_noarm() to more clearly associate
it with the plane->update_noarm() vfunc.
v2: Change the naming convention a bit
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216232806.6194-2-ville.syrjala@linux.intel.com
Ville Syrjälä [Wed, 16 Feb 2022 23:28:05 +0000 (01:28 +0200)]
drm/i915: Clean up SSKPD/MLTR defines
Give names to the SSKPD/MLTR fields, and use the
REG_GENMASK* and REG_FIELD_GET*.
Also drop the bogus non-mirrored SSKP register define.
v2: Rebase due to intel_mchbar_regs.h
Leave gen6_check_mch_setup() in place for the moment
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216232806.6194-3-ville.syrjala@linux.intel.com
Matt Roper [Tue, 15 Feb 2022 16:35:45 +0000 (08:35 -0800)]
drm/i915/dg2: Print PHY name properly on calibration error
We need to use phy_name() to convert the PHY value into a human-readable
character in the error message.
Fixes:
a6a128116e55 ("drm/i915/dg2: Wait for SNPS PHY calibration during display init")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215163545.2175730-1-matthew.d.roper@intel.com
Srinivasan Shanmugam [Tue, 15 Feb 2022 23:55:31 +0000 (15:55 -0800)]
drm/i915/dg2: Move misplaced 'ctx' & 'gt' wa's to engine wa list
Registers that belong to the shared render/compute reset domain need to
be placed on an engine workaround list to ensure that they are properly
re-applied whenever any RCS or CCS engine is reset, even if the
registers do not belong to a specific engine's MMIO range. We have a
number of workarounds today that are incorrectly implemented on the 'gt'
workaround list and need to be moved accordingly. We also have one
workaround (Wa_22012532006) that is incorrectly implemented on the
context workaround list, even though the register it is adjusting is not
part of the RCS engine's context image; it must also be moved.
We'll have some workaround refactoring coming in the near future that
deals with registers in the reset domain in a more clear way. But in
the meantime, we should just move these workarounds to
rcs_engine_wa_init() to place them on the RCS engine's workaround list.
All production DG2 platforms will have an RCS engine (it's never fused
off) so these registers will be properly restored after a domain reset
triggered via an RCS engine _or_ a CCS engine.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.s@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215235531.2236399-1-matthew.d.roper@intel.com
Nathan Chancellor [Thu, 17 Feb 2022 16:21:42 +0000 (09:21 -0700)]
drm/amdkfd: Use proper enum in pm_unmap_queues_v9()
Clang warns:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_packet_manager_v9.c:267:3:
error: implicit conversion from enumeration type 'enum
mes_map_queues_extended_engine_sel_enum' to different enumeration type
'enum mes_unmap_queues_extended_engine_sel_enum'
[-Werror,-Wenum-conversion]
extended_engine_sel__mes_map_queues__sdma0_to_7_sel :
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Use 'extended_engine_sel__mes_unmap_queues__sdma0_to_7_sel' to eliminate
the warning, which is the same numeric value of the proper type.
Fixes:
009e9a158505 ("drm/amdkfd: navi2x requires extended engines to map and unmap sdma queues")
Link: https://github.com/ClangBuiltLinux/linux/issues/1596
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yifan Zhang [Thu, 10 Feb 2022 19:42:09 +0000 (14:42 -0500)]
drm/amdgpu: add gc 10.3.6 support
this patch adds gc 10.3.6 support.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yifan Zhang [Thu, 10 Feb 2022 19:35:48 +0000 (14:35 -0500)]
drm/amdgpu: add support for gmc10 for gc 10.3.6
this patch adds support for gmc10.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yifan Zhang [Thu, 2 Dec 2021 07:49:48 +0000 (15:49 +0800)]
drm/amdgpu: add Clock and Power Gating support for gc 10.3.6
Add below supports:
GFX Coarse Grain Clock Gating(CGCG)
GFX Coarse grain light sleep/deep sleep(CGLS)
GFX Medium Grain Clock Gating(MGCG)
GFX Medium Grain light sleep/deep sleep(MGLS)
GFX Fine Grain Clock Gating(FGCG)
RLC MGLS
CP MGLS
MMHUB Clock Gating
SDMA Clock Gating
HDP Clock Gating
ATHUB Clock Gating
IH Clock Gating
GFX Power Gating
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yifan Zhang [Thu, 10 Feb 2022 19:34:43 +0000 (14:34 -0500)]
drm/amdgpu: add nv common init for gc 10.3.6
This patch adds add nv common init for gc 10.3.6.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 24 Jan 2022 21:08:32 +0000 (16:08 -0500)]
drm/amdgpu/smu11.5: restore cclks in vangogh_set_performance_level
When we disable manual clock setting, we need to restore the cclks
as well as the gfxclk.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom Rix [Thu, 17 Feb 2022 15:38:42 +0000 (07:38 -0800)]
drm/amdgpu: fix amdgpu_ras_block_late_init error handler
Clang build fails with
amdgpu_ras.c:2416:7: error: variable 'ras_obj' is used uninitialized
whenever 'if' condition is true
if (adev->in_suspend || amdgpu_in_reset(adev)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
amdgpu_ras.c:2453:6: note: uninitialized use occurs here
if (ras_obj->ras_cb)
^~~~~~~
There is a logic error in the error handler's labels.
ex/ The sysfs: is the last goto label in the normal code but
is the middle of error handler. Rework the error handler.
cleanup: is the first error, so it's handler should be last.
interrupt: is the second error, it's handler is next. interrupt:
handles the failure of amdgpu_ras_interrupt_add_hander() by
calling amdgpu_ras_interrupt_remove_handler(). This is wrong,
remove() assumes the interrupt has been setup, not torn down by
add(). Change the goto label to cleanup.
sysfs is the last error, it's handler should be first. sysfs:
handles the failure of amdgpu_ras_sysfs_create() by calling
amdgpu_ras_sysfs_remove(). But when the create() fails there
is nothing added so there is nothing to remove. This error
handler is not needed. Remove the error handler and change
goto label to interrupt.
Fixes:
b293e891b057 ("drm/amdgpu: add helper function to do common ras_late_init/fini (v3)")
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Luben Tuikov [Thu, 17 Feb 2022 16:12:55 +0000 (11:12 -0500)]
drm/amdgpu: Dynamically initialize IP instance attributes
Dynamically initialize IP instance attributes. This eliminates bugs
stemming from adding new attributes to an IP instance.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Reported-by: Tom StDenis <tom.stdenis@amd.com>
Fixes:
4d7ba312dd1f ("drm/amdgpu: Add "harvest" to IP discovery sysfs")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Tue, 15 Feb 2022 14:59:07 +0000 (09:59 -0500)]
drm/amd/amdgpu: Add APU flag to gca_config debugfs data (v3)
Needed by umr to detect if ip discovered ASIC is an APU or not.
(v2): Remove asic type from packet it's not strictly needed
(v3): Correct comment
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Thu, 17 Feb 2022 05:30:21 +0000 (23:30 -0600)]
drm/amd: Use amdgpu_device_should_use_aspm on navi umd pstate switching
The `program_aspm` callback is already guarded for aspm, but the
`enable_aspm` callback doesn't follow the module parameter.
Update it to use the helper `amdgpu_device_should_use_aspm`.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Thu, 17 Feb 2022 05:19:58 +0000 (23:19 -0600)]
drm/amd: Refactor `amdgpu_aspm` to be evaluated per device
Evaluating `pcie_aspm_enabled` as part of driver probe has the implication
that if one PCIe bridge with an AMD GPU connected doesn't support ASPM
then none of them do. This is an invalid assumption as the PCIe core will
configure ASPM for individual PCIe bridges.
Create a new helper function that can be called by individual dGPUs to
react to the `amdgpu_aspm` module parameter without having negative results
for other dGPUs on the PCIe bus.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Luben Tuikov [Wed, 16 Feb 2022 21:47:32 +0000 (16:47 -0500)]
drm/amdgpu: Fix ARM compilation warning
Fix this ARM warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:664:35: warning: format '%ld'
expects argument of type 'long int', but argument 4 has type 'size_t' {aka
'unsigned int'} [-Wformat=]
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: kbuild-all@lists.01.org
Cc: linux-kernel@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
a6c40b178092 ("drm/amdgpu: Show IP discovery in sysfs")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 1 Feb 2022 16:26:33 +0000 (10:26 -0600)]
drm/amd: Check if ASPM is enabled from PCIe subsystem
commit
0064b0ce85bb ("drm/amd/pm: enable ASPM by default") enabled ASPM
by default but a variety of hardware configurations it turns out that this
caused a regression.
* PPC64LE hardware does not support ASPM at a hardware level.
CONFIG_PCIEASPM is often disabled on these architectures.
* Some dGPUs on ALD platforms don't work with ASPM enabled and PCIe subsystem
disables it
Check with the PCIe subsystem to see that ASPM has been enabled
or not.
Fixes:
0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Link: https://wiki.raptorcs.com/w/images/a/ad/P9_PHB_version1.0_27July2018_pub.pdf
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1723
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1739
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1885
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1907
Tested-by: koba.ko@canonical.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
yipechai [Tue, 15 Feb 2022 06:38:13 +0000 (14:38 +0800)]
drm/amdgpu: Remove redundant .ras_late_init initialization in some ras blocks
1. Define amdgpu_ras_block_late_init_default in amdgpu_ras.c as
.ras_late_init common function, which is called when
.ras_late_init of ras block isn't initialized.
2. Remove the code of using amdgpu_ras_block_late_init to
initialize .ras_late_init in ras blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
yipechai [Mon, 14 Feb 2022 06:53:37 +0000 (14:53 +0800)]
drm/amdgpu: define amdgpu_ras_late_init to call all ras blocks' .ras_late_init
Define amdgpu_ras_late_init to call all ras blocks' .ras_late_init.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
yipechai [Mon, 14 Feb 2022 06:38:02 +0000 (14:38 +0800)]
drm/amdgpu: Optimize xxx_ras_late_init function of each ras block
1. Move calling ras block instance members from module internal
function to the top calling xxx_ras_late_init.
2. Module internal function calls can only use parameter variables
of xxx_ras_late_init instead of ras block instance members.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>