AsciiWolf [Thu, 19 Sep 2019 12:34:31 +0000 (14:34 +0200)]
polkit: fix typo
Susant Sahani [Wed, 18 Sep 2019 12:14:15 +0000 (14:14 +0200)]
test-network: Drop start dnsmasq
Yu Watanabe [Wed, 18 Sep 2019 13:14:45 +0000 (22:14 +0900)]
dhcp6: use unaligned_read_be32()
Closes #13591.
Yu Watanabe [Tue, 17 Sep 2019 23:15:01 +0000 (08:15 +0900)]
Merge pull request #13582 from yuwata/udevadm-reload
udevadm: use 'udevadm control' to reload udevd
Yu Watanabe [Tue, 17 Sep 2019 23:09:48 +0000 (08:09 +0900)]
Merge pull request #13583 from keszybz/networkd-hash-compare-equality
Networkd hash compare equality
Yu Watanabe [Tue, 17 Sep 2019 13:18:49 +0000 (22:18 +0900)]
dhcp6: add missing option length check
Closes #13578.
Frantisek Sumsal [Tue, 17 Sep 2019 17:42:26 +0000 (17:42 +0000)]
Merge pull request #13577 from yuwata/network-fix-ci-failure
network: fix CI failure
Zbigniew Jędrzejewski-Szmek [Tue, 17 Sep 2019 17:27:58 +0000 (19:27 +0200)]
networkd: unbreak routing_policy_rule_compare_func()
!r is the same r == 0, so this was short-circuiting the comparison when
streq(a->iff, b->iff) or streq(a->off, b->off). Before the parent commit which
moved those comparisons to the end, this was short-circuiting quite a bit
of the comparison function.
Zbigniew Jędrzejewski-Szmek [Tue, 17 Sep 2019 17:20:21 +0000 (19:20 +0200)]
Merge pull request #13508 from yuwata/network-route-fix-13506
network: takes more route information into hash func
Zbigniew Jędrzejewski-Szmek [Tue, 17 Sep 2019 17:13:09 +0000 (19:13 +0200)]
networkd: make neighbor_hash_func() handle the same data as neighbor_compare_func()
In practice this probably makes little difference, because we only use AF_INET
and AF_INET6, but it's cleaner to use the same logic in both places.
Zbigniew Jędrzejewski-Szmek [Tue, 17 Sep 2019 17:11:31 +0000 (19:11 +0200)]
networkd: use same order in _hash_func() and _compare_func()
This makes it easier to see that the same data is handled in both cases.
No functional change.
Zbigniew Jędrzejewski-Szmek [Tue, 17 Sep 2019 17:09:57 +0000 (19:09 +0200)]
networkd: split out helper function for address extraction
Yu Watanabe [Tue, 17 Sep 2019 16:32:46 +0000 (01:32 +0900)]
unit: add ExecReload= in systemd-udevd.service
Yu Watanabe [Tue, 17 Sep 2019 16:28:23 +0000 (01:28 +0900)]
udevadm: use usec_add()
Also fixes description of event source.
Yu Watanabe [Tue, 17 Sep 2019 15:52:07 +0000 (00:52 +0900)]
udevadm: missing initialization of descriptor
Anita Zhang [Wed, 21 Aug 2019 00:39:38 +0000 (17:39 -0700)]
core: add ExecXYZEx= bus hook ups to all exec command properties
The "Ex" variant was originally only added for ExecStartXYZ= but it makes
sense to have feature parity for the rest of the exec command properties
as well (e.g. ExecReload=, ExecStop=, etc).
Frantisek Sumsal [Tue, 17 Sep 2019 10:22:19 +0000 (12:22 +0200)]
test: rename TEST-EXECRELOAD to avoid name conflict
Yu Watanabe [Tue, 17 Sep 2019 15:13:08 +0000 (00:13 +0900)]
Merge pull request #13559 from ssahani/ipv6ra-route
network: make networkd able to advertise IPv6 routes on links
ypf791 [Fri, 19 Jul 2019 10:28:04 +0000 (18:28 +0800)]
core: coldplug possible nop_job
Yu Watanabe [Mon, 9 Sep 2019 15:18:05 +0000 (00:18 +0900)]
network: also take Route::initcwnd and ::initrwnd into hash func
Fixes #13506.
Yu Watanabe [Mon, 9 Sep 2019 15:17:28 +0000 (00:17 +0900)]
network: take more route information into hash func
Yu Watanabe [Mon, 9 Sep 2019 15:16:41 +0000 (00:16 +0900)]
network: make route_get() or friends take Route object
Yu Watanabe [Sun, 15 Sep 2019 13:50:36 +0000 (22:50 +0900)]
sd-netlink: fix invalid assertion
It is natural that n_attiributes is less than type. But in that case,
the message does not contain any message about the type. So, we should
not abort execution with assertion, but just return -ENODATA.
Yu Watanabe [Tue, 17 Sep 2019 12:41:38 +0000 (21:41 +0900)]
Merge pull request #13567 from keszybz/logind-two-refactoring-patches
Logind two refactoring patches
Yu Watanabe [Tue, 17 Sep 2019 12:34:06 +0000 (21:34 +0900)]
network: do not enter failed state if device's sysfs entry does not exist yet
Yu Watanabe [Tue, 17 Sep 2019 12:29:23 +0000 (21:29 +0900)]
network: add missing link->network checks
When the function is called, no network file may be assigned to the
link.
Frantisek Sumsal [Tue, 17 Sep 2019 12:21:05 +0000 (12:21 +0000)]
Merge pull request #13573 from fbuihuu/ask-password-small-fixes
Ask password small fixes
Susant Sahani [Mon, 16 Sep 2019 14:43:34 +0000 (20:13 +0530)]
Add test for IPv6 Route advertisement
Susant Sahani [Sat, 14 Sep 2019 11:14:22 +0000 (16:44 +0530)]
network: Add support to advertie ipv6 route
Implements https://tools.ietf.org/html/rfc4191
cat veth99.network
```
[Match]
Name=veth99
[Network]
DHCP=no
IPv6PrefixDelegation=yes
Address=2001:db8:0:1::1/64
[IPv6Prefix]
Prefix=2001:db8:0:1::4/64
[IPv6RoutePrefix]
Route=2001:db0:fff::/48
```
Wireshark
```
Frame 481: 142 bytes on wire (1136 bits), 142 bytes captured (1136 bits) on interface 0
Ethernet II, Src: 1e:04:f8:b8:2f:d4 (1e:04:f8:b8:2f:d4), Dst: IPv6mcast_01 (33:33:00:00:00:01)
Internet Protocol Version 6, Src: fe80::1c04:f8ff:feb8:2fd4, Dst: ff02::1
Internet Control Message Protocol v6
Type: Router Advertisement (134)
Code: 0
Checksum: 0xec77 [correct]
[Checksum Status: Good]
Cur hop limit: 0
Flags: 0x00, Prf (Default Router Preference): Medium
Router lifetime (s): 0
Reachable time (ms): 0
Retrans timer (ms): 0
ICMPv6 Option (Source link-layer address : 1e:04:f8:b8:2f:d4)
Type: Source link-layer address (1)
Length: 1 (8 bytes)
Link-layer address: 1e:04:f8:b8:2f:d4 (1e:04:f8:b8:2f:d4)
ICMPv6 Option (MTU : 1500)
Type: MTU (5)
Length: 1 (8 bytes)
Reserved
MTU: 1500
ICMPv6 Option (Prefix information : 2001:db8:0:1::4/64)
Type: Prefix information (3)
Length: 4 (32 bytes)
Prefix Length: 64
Flag: 0xc0, On-link flag(L), Autonomous address-configuration flag(A)
Valid Lifetime: 2592000
Preferred Lifetime: 604800
Reserved
Prefix: 2001:db8:0:1::4
ICMPv6 Option (Route Information : Medium 2001:db0:fff::/48)
Type: Route Information (24)
Length: 3 (24 bytes)
Prefix Length: 48
Flag: 0x00, Route Preference: Medium
...0 0... = Route Preference: Medium (0)
000. .000 = Reserved: 0
Route Lifetime: 604800
Prefix: 2001:db0:fff::
```
Zbigniew Jędrzejewski-Szmek [Tue, 17 Sep 2019 08:54:18 +0000 (10:54 +0200)]
Merge pull request #13300 from mrc0mmand/test-execreload
test: introduce TEST-37-EXECRELOAD
Michal Sekletar [Mon, 9 Sep 2019 12:38:35 +0000 (14:38 +0200)]
path: stop watching path specs once we triggered the target unit
We start watching them again once we get a notification that triggered
unit entered inactive or failed state.
Fixes: #10503
Zbigniew Jędrzejewski-Szmek [Tue, 17 Sep 2019 07:57:21 +0000 (09:57 +0200)]
Merge pull request #13565 from yuwata/network-drop-ipv6ll-address
network: drop IPv6LL address when LinkLocalAddressing=no|ipv4
Franck Bui [Tue, 17 Sep 2019 07:48:12 +0000 (09:48 +0200)]
tty-ask-pwd-agent: simplify handling of --wall a bit
"wall" was always NULL when passed to parse_password() so let's simplify this
part a bit.
The effective changes are small but wall_tty_match() needed to be moved so it's
still visible from parse_password().
No functional changes.
Zbigniew Jędrzejewski-Szmek [Tue, 17 Sep 2019 07:14:12 +0000 (09:14 +0200)]
Merge pull request #13494 from yuwata/dhcp6-delay
dhcp6: rfc8415 fixes
Maciej Stanczew [Mon, 16 Sep 2019 00:09:35 +0000 (02:09 +0200)]
core: Fix setting StatusUnitFormat from config files
Yu Watanabe [Sun, 15 Sep 2019 21:16:48 +0000 (06:16 +0900)]
test-network: add one more test case for LinkLocalAddressing=
Yu Watanabe [Sun, 15 Sep 2019 21:07:38 +0000 (06:07 +0900)]
network: drop IPv6LL address when LinkLocalAddressing=no|ipv4
C.f. disscussion in #13533.
Hopefully fixes #12886.
Susant Sahani [Mon, 16 Sep 2019 18:46:39 +0000 (20:46 +0200)]
network DHCP4: Dont mislead the logs.
The debug log making sense to the end user as an error.
Franck Bui [Mon, 16 Sep 2019 20:03:43 +0000 (22:03 +0200)]
tty-ask-pwd-agent: fix message forwarded to wall(1)
Commit
a1c111c2d12429d2 wrongly replaced '!' with ':' when the message is
forwarded to wall(1).
Indeed in this case we are not requesting the user for providing a password but
instead we are simply displaying a message to suggest starting
tty-ask-password-agent for providing the password.
Donald A. Cupp Jr [Thu, 5 Sep 2019 22:03:54 +0000 (15:03 -0700)]
Update m4 for selective utmp support.
modified: tmpfiles.d/systemd.conf.m4
matthiasroos [Mon, 16 Sep 2019 19:10:15 +0000 (21:10 +0200)]
hwdb: add Medion Akoya E2292 (#13498)
Fixes #13480.
Rafael Fontenelle [Sun, 8 Sep 2019 22:08:14 +0000 (19:08 -0300)]
po: update Brazilian Portuguese translation
Franck Bui [Thu, 5 Sep 2019 14:53:50 +0000 (16:53 +0200)]
core: restore initialization of u->source_mtime
During the rework of unit file loading, commit
e8630e695232bdfc dropped the
initialization u->source_mtime. This had the bad side effect that generated
units always needed daemon reloading.
Zbigniew Jędrzejewski-Szmek [Mon, 16 Sep 2019 12:27:41 +0000 (14:27 +0200)]
Merge pull request #13551 from keszybz/ll-no-default-route
Link local no default route
Yu Watanabe [Mon, 16 Sep 2019 12:24:13 +0000 (21:24 +0900)]
Merge pull request #13354 from keszybz/two-refactoring-patches
Two or more refactoring patches
Zbigniew Jędrzejewski-Szmek [Mon, 19 Aug 2019 14:31:27 +0000 (16:31 +0200)]
basic/conf-files: make conf_files_list() take just a single directory
This function had two users (apart from tests), and both only used one
argument. And it seems likely that if we need to pass more directories,
either the _nulstr() or the _strv() form would be used. Let's simplify
the code.
Zbigniew Jędrzejewski-Szmek [Tue, 6 Aug 2019 18:22:23 +0000 (20:22 +0200)]
core/mount-setup: use conf_files_list_strv() for relabel-extra.d/
Zbigniew Jędrzejewski-Szmek [Mon, 5 Aug 2019 13:53:28 +0000 (15:53 +0200)]
update-utmp: define main() through macro
Update logging a bit: drop logging of the pid, nowadays pid1 and journald
do a very good job of logging that. Always log about failure to open audit
fd, but at DEBUG_LEVEL if not important.
Zbigniew Jędrzejewski-Szmek [Fri, 6 Sep 2019 07:38:33 +0000 (09:38 +0200)]
logind: shorten code a bit
Zbigniew Jędrzejewski-Szmek [Fri, 6 Sep 2019 07:18:33 +0000 (09:18 +0200)]
logind: use newer ret var naming style
Benjamin Gilbert [Wed, 11 Sep 2019 03:23:59 +0000 (23:23 -0400)]
mount-setup: relabel items mentioned directly in relabel-extra.d
relabel_extra() relabels the descendants of directories listed in
relabel-extra.d, but doesn't relabel the files or directories
explicitly named there. This makes it impossible to use
relabel-extra.d to relabel the root of a filesystem. Fix by
relabeling the named items too.
Renaud Métrich [Fri, 13 Sep 2019 09:18:18 +0000 (11:18 +0200)]
Call getgroups() to know size of supplementary groups array to allocate
Resolves RHBZ #1743230 - journalctl dumps core when stack limit is reduced to 256 KB
Yu Watanabe [Fri, 6 Sep 2019 18:36:19 +0000 (03:36 +0900)]
ndisc: make first solicit delayed randomly
Closes #13460.
Yu Watanabe [Fri, 6 Sep 2019 18:29:46 +0000 (03:29 +0900)]
dhcp6: read OPTION_INFORMATION_REFRESH_TIME option
Fixes #13460.
Yu Watanabe [Thu, 29 Aug 2019 19:18:27 +0000 (04:18 +0900)]
network: add more debug messages
Yu Watanabe [Thu, 29 Aug 2019 11:24:27 +0000 (20:24 +0900)]
network: set scope and protocol for default route
Yu Watanabe [Wed, 28 Aug 2019 23:11:02 +0000 (08:11 +0900)]
network: drop redundant and invalid destination address
When dst_prefixlen is not set, the value is not used.
Yu Watanabe [Wed, 28 Aug 2019 23:13:15 +0000 (08:13 +0900)]
network: do not use implicit cast to boolean
Yu Watanabe [Wed, 28 Aug 2019 13:42:33 +0000 (22:42 +0900)]
network: do not create default route for ipv4 link local addressing
When nspawn container with private network starts, networkd creates
the default route for the interface. The route may cause problem on
the host side, and it can be created with DefaultRouteOnDevice= now.
Hence, this makes networkd not create the route implicitly any more.
Closes #13418.
Piotr Drąg [Sat, 14 Sep 2019 10:44:57 +0000 (12:44 +0200)]
po: update Polish translation
Zbigniew Jędrzejewski-Szmek [Fri, 13 Sep 2019 16:03:29 +0000 (18:03 +0200)]
Merge pull request #13405 from yuwata/network-ipv6-privacy-extensions-cleanup
Network ipv6 privacy extensions cleanup
Zbigniew Jędrzejewski-Szmek [Fri, 13 Sep 2019 14:15:02 +0000 (16:15 +0200)]
Merge pull request #13439 from yuwata/core-support-systemctl-clean-more
core: support systemctl clean more
Zbigniew Jędrzejewski-Szmek [Fri, 13 Sep 2019 13:27:55 +0000 (15:27 +0200)]
Merge pull request #13519 from yuwata/udev-fix-multi-match
udev: fix multi match
Yu Watanabe [Fri, 13 Sep 2019 08:12:59 +0000 (17:12 +0900)]
man: move TimeoutCleanSec= entry from .service to .exec
Follow-up for
12213aed128456af33ff6131a14b637318227346.
Closes #13546.
Ronan Pigott [Thu, 12 Sep 2019 17:13:13 +0000 (10:13 -0700)]
zsh: udpate bootctl completions
Zbigniew Jędrzejewski-Szmek [Thu, 12 Sep 2019 12:52:08 +0000 (14:52 +0200)]
resolved: fix abort when recv() returns 0
https://bugzilla.redhat.com/show_bug.cgi?id=1703598
Yu Watanabe [Fri, 13 Sep 2019 04:31:20 +0000 (13:31 +0900)]
Merge pull request #13538 from keszybz/doc-tweaks
Various minor tweaks that don't deserve seperate pull requests
Bastien Nocera [Thu, 12 Sep 2019 17:02:35 +0000 (19:02 +0200)]
hwdb: Also mark lis3lv02d sensors in "HP" laptops as being in the base
We matched "*Hewlett-Packard*" laptops but not "*HP*" laptops, which
caused a regression for the HP Elite Book 850 G3.
Fixes:
4247938ee13e23eae1afcecbe646de5283b7afc2
Closes: #13543
Zbigniew Jędrzejewski-Szmek [Sun, 8 Sep 2019 14:13:15 +0000 (16:13 +0200)]
polkit: change "revert settings" to "reset settings"
"reset" is more understandable. The verb is "revert", but it might actually be
better to have a description which uses different words instead of duplicating
the name of the command.
https://github.com/systemd/systemd/commit/
379158684abd981cc760342aad61b1c813b71eb2#commitcomment-
34992552
Zbigniew Jędrzejewski-Szmek [Thu, 12 Sep 2019 15:36:34 +0000 (17:36 +0200)]
Merge pull request #13500 from yuwata/udev-fix-static_node
udev: add missing flag for OPTIONS=static_node
Evgeny Vereshchagin [Thu, 12 Sep 2019 10:34:26 +0000 (10:34 +0000)]
fuzzit: export the API key instead of using `auth`
"We removed some cahing related code that auth used and caused problems"
Zbigniew Jędrzejewski-Szmek [Sat, 7 Sep 2019 13:16:35 +0000 (15:16 +0200)]
man: remove repeated words
https://github.com/systemd/systemd/commit/
b5328434c91b10ad49647e2352e62b1fbdce329d#commitcomment-
34989175
Zbigniew Jędrzejewski-Szmek [Thu, 12 Sep 2019 09:15:35 +0000 (11:15 +0200)]
man: fix description of ARPIntervalSec= units
https://bugzilla.redhat.com/show_bug.cgi?id=1751363
Zbigniew Jędrzejewski-Szmek [Thu, 5 Sep 2019 11:41:08 +0000 (13:41 +0200)]
TODO: add stuff about timers
Yu Watanabe [Thu, 12 Sep 2019 03:02:28 +0000 (12:02 +0900)]
Merge pull request #13526 from yuwata/network-check-access-mode-of-key-file
network: check access mode of key file
Yu Watanabe [Wed, 11 Sep 2019 09:24:41 +0000 (18:24 +0900)]
network: do not abort execution when a config file cannot be loaded
Closes #13516.
Yu Watanabe [Wed, 11 Sep 2019 09:11:19 +0000 (18:11 +0900)]
fileio: update warning message
Yu Watanabe [Wed, 11 Sep 2019 09:09:55 +0000 (18:09 +0900)]
network: also check the permission of key file
baybal [Wed, 11 Sep 2019 02:08:59 +0000 (08:08 +0600)]
hwdb: axis override for Dell 9360 touchpad
and possibly other XPS models sharing the touchpad (#13472)
Evgeny Vereshchagin [Tue, 10 Sep 2019 23:48:57 +0000 (23:48 +0000)]
oss-fuzz.sh: stop downloading the skia seed corpus
When the fuzz target was integrated, it was added as a stopgap
to get fuzz-json up and running. It served its purpose and can
safely be removed to prevent tools/oss-fuzz.sh from failing with
```
+wget -O /home/travis/build/systemd/systemd/out/fuzz-json_seed_corpus.zip https://storage.googleapis.com/skia-fuzzer/oss-fuzz/skjson_seed_corpus.zip
--2019-09-10 22:40:44-- https://storage.googleapis.com/skia-fuzzer/oss-fuzz/skjson_seed_corpus.zip
Resolving storage.googleapis.com (storage.googleapis.com)... 74.125.70.128, 2607:f8b0:4001:c05::80
Connecting to storage.googleapis.com (storage.googleapis.com)|74.125.70.128|:443... connected.
HTTP request sent, awaiting response... 403 Forbidden
2019-09-10 22:40:44 ERROR 403: Forbidden.
```
Ideally we should put our seed corpus somewhere and download it from there
but I haven't got round to it.
Yu Watanabe [Wed, 11 Sep 2019 00:06:15 +0000 (09:06 +0900)]
test: add test cases for empty string match
Yu Watanabe [Tue, 10 Sep 2019 23:50:21 +0000 (08:50 +0900)]
udev: fix multi match
Fixes #13518.
Yu Watanabe [Tue, 10 Sep 2019 06:16:15 +0000 (15:16 +0900)]
Merge pull request #13511 from ssahani/networkctl-dhcp
networkctl Improve display of address . Show it's dhcp
Susant Sahani [Mon, 9 Sep 2019 14:27:40 +0000 (19:57 +0530)]
networkctl: Display address is a DHCP4 address
CLoses https://github.com/systemd/systemd/issues/10839
Susant Sahani [Mon, 9 Sep 2019 14:27:14 +0000 (19:57 +0530)]
sd-network: add support to get DHCP4 address
Yu Watanabe [Sun, 8 Sep 2019 16:29:27 +0000 (01:29 +0900)]
udev: also logs file permission
Yu Watanabe [Sun, 8 Sep 2019 16:27:56 +0000 (01:27 +0900)]
udev: add missing flag for OPTIONS=static_node
Fixes RHBZ#1740664.
Evgeny Vereshchagin [Fri, 6 Sep 2019 23:26:44 +0000 (23:26 +0000)]
travis: skip the right stage
It's just a follow-up to https://github.com/systemd/systemd/pull/13493.
The stage is called "Fuzzit-Regression" now.
Evgeny Vereshchagin [Fri, 6 Sep 2019 17:29:10 +0000 (17:29 +0000)]
travis: switch to the latest version of the fuzzit CLI
I was informed that fuzzit-1.1 is going to be deprecated soon. Generally
the latest version isn't recommened because it's still in beta and theoretically
might be backwards incompatible but let's try rolling forward to avoid PRs
like this going forward. We can always roll it back :-)
Fabian Henneke [Wed, 21 Aug 2019 09:17:59 +0000 (11:17 +0200)]
udev: Add id program and rule for FIDO security tokens
Add a fido_id program meant to be run for devices in the hidraw
subsystem via an IMPORT directive. The program parses the HID report
descriptor and assigns the ID_SECURITY_TOKEN environment variable if a
declared usage matches the FIDO_CTAPHID_USAGE declared in the FIDO CTAP
specification. This replaces the previous approach of whitelisting all
known security token models manually.
This commit is accompanied by a test suite and a fuzzer target for the
descriptor parsing routine.
Fixes: #11996.
Michael Olbrich [Fri, 6 Sep 2019 13:04:01 +0000 (15:04 +0200)]
pstore: fix use after free
The memory is still needed in the sd_journal_sendv() after the 'if' block.
Evgeny Vereshchagin [Fri, 6 Sep 2019 13:11:38 +0000 (13:11 +0000)]
semaphore: switch to another keyserver
lxc-create has been failing to download the image today with
```
+ sudo lxc-create -n buster-amd64 -t download -- -d debian -r buster -a amd64
Setting up the GPG keyring
ERROR: Unable to fetch GPG key from keyserver
lxc-create: buster-amd64: lxccontainer.c: create_run_template: 1617 Failed to create container from template
lxc-create: buster-amd64: tools/lxc_create.c: main: 327 Failed to create container buster-amd64
```
Let's try another keyserver.
Daniel Edgecumbe [Thu, 5 Sep 2019 14:34:52 +0000 (15:34 +0100)]
journal: Make the output of --update-catalog deterministic
The use of an unordered hashmap means that the output of
'journalctl --update-catalog' differs between runs despite there being no
changes in the input files.
By changing all instances of Hashmap to OrderedHashmap we fix this, and now
the catalog is reproducible.
Motivation: https://reproducible-builds.org
Signed-off-by: Daniel Edgecumbe <git@esotericnonsense.com>
Zbigniew Jędrzejewski-Szmek [Fri, 6 Sep 2019 06:49:09 +0000 (08:49 +0200)]
Merge pull request #13484 from evverx/look-at-repo-slug
travis: protect the systemd organization on Fuzzit from forks
Evgeny Vereshchagin [Fri, 6 Sep 2019 01:44:52 +0000 (01:44 +0000)]
travis: protect the systemd organization on Fuzzit from forks
Now that v243 is out, the script has been pulled by forks that are
activated on Travis CI. As a result, all those forks have started to send
their fuzzers to Fuzzit inadvertantly consuming our CPUs along the way.
Let's prevent this by bailing out early if the script is run outside of
the systemd repository.
Hans de Goede [Thu, 5 Sep 2019 12:16:12 +0000 (14:16 +0200)]
hwdb: Mark lis3lv02d sensors in HP laptops as being in the base
The lis3lv02d sensor used in many HP laptops is (almost) always intented
primarily for freefall detection / HDD protection and (almost) always
is located in the base of a classic clamshell laptop
Before we had the ACCEL_LOCATION udev property the issues this caused
with screen-rotation were fixed by applying a mount-matrix which
translates base-coordinates to display-coordinates assuming the display
is at an angle of exact 90 degrees to the base (swap Y and Z axis).
The comment calls this translate "from "can play neverball" to
"matches Windows 8 orientation"" but what it really does is translate
base accel-axis to display accel-axis. Thus allows rotating the screen
if you put the laptop on its side, but no-one normally does that with
a 2Kg clamshell laptop.
The obviously correct thing to do on classic clamshell laptops (not 2-in-1s)
is to disable automatic screen rotation. This commit marks the accelerometer
in these laptops as being part of the base, which will make iio-sensor-proxy
disable automatic screen rotation.
This commit also removes the orientation-matrix since the unmodified coordinates
coming from the sensor are oriented correctly for a sensor in the base.
Also see the "Bad accelerometer values cause incorrect screen rotation"
systemd-devel mail-thread from September 2019.
Yu Watanabe [Wed, 4 Sep 2019 00:16:40 +0000 (09:16 +0900)]
po: update Japanese translation
Zbigniew Jędrzejewski-Szmek [Tue, 3 Sep 2019 09:34:09 +0000 (11:34 +0200)]
docs: fix push recipe in RELEASE.md
Carlo Teubner [Wed, 4 Sep 2019 17:58:56 +0000 (18:58 +0100)]
man/systemctl.xml: fix missing "not"
nikolas [Wed, 4 Sep 2019 16:21:14 +0000 (12:21 -0400)]
docs: fix typo in boot loader doc