ARM: shmobile: lager-reference: Refactor clock lookup hack

Make the clock lookup hack more generic to ease the addition of more
devices.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 9a8c3ab9c0286a6c81012eaf9e95ec2d3e58d21f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: Add internal USB PCI support

This adds internal PCI USB host devices to R-Car H2 Lager board.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
[damm@opensource.se: Rebased and reworked to only include USB1 and USB2]
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 849f7b6c10d8016b55e13b7ad2e9f299e2da817b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Add defconfig for shmobile multiplatform

This is intended to be a base for a defconfig to cover all
shmobile multiplatform boards. It currently includes configuration
for the following boards:

* KZM9D
* Lager
* Koelsch

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
(cherry picked from commit 8a76f048dc7fff769aa899f5ffc7975b57de0b16)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7778 dtsi: Remove duplicate i2c nodes

"ARM: shmobile: r8a7778: add I2C support on DTSI" was applied twice:

    commit ae4273ec7b25c8b9c895a4aae31f2fced980b7bf
    commit 3acb51b9215bd99da403ecf8200f8425176b1926

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 08517b212726e90b1755e3c917ba064b24e97cbe)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: add SDHI0/2 support on DTS

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit c6119944a421c416818a9ff11f8bd77aa4d683a5)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager defconfig: Enable RSPI and MTD_M25P80

This enables support for the Spansion s25fl512s SPI FLASH on QSPI.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: resolved conflict]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 917163578a3dcfa3bfc05cc3bfc2653e2994971b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager dts: Add QSPI nodes

Add pinctrl and SPI devices for QSPI on Lager.
Add Spansion s25fl512s SPI FLASH and MTD partitions.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 9fe7c4f810a7e82c4a1a9765017f9cb2c2b40a65)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790 dtsi: Add QSPI node

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 7053e134a17d29e023dd4c55643ea4af9c534ccf)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager legacy: Add QSPI pinmux

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 248deabbd4a2f4c696338536fdaad3a01f66bee7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: add SDHI0/2 support

SDHI0 (CN8) needs JP/SW settings

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 40e6a51e0cf44e944eed29697eb849140bf8258f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Add SDHI devices for legacy Koelsch

Add SDHI0, SDHI1 and SDHI2 as platform devices to the
legacy Koelsch board code. Also include regulators that
are needed to control VCCQ and VDD.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit d12e699f44b8277b7b72b546c69948a2f20514f8)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: genmai: Enable r7s72100-ether

Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
(cherry picked from commit 03fec7dee502d43114f384a1588ce84a3c9bf38d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: genmai defconfig: Enable RSPI

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 8f33d31ee270f2a6bcc661815a520f76565674c3)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch defconfig: Enable RSPI and MTD_M25P80

This enables support for the Spansion s25fl512s SPI FLASH on QSPI.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: resolved conflict]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 201bd5ddcd9f11bb3942a062f0e907c3edc61f87)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager legacy: Switch QSPI to named IRQs

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit a70eda7e40d09b8bf1a817488a255ce907587a71)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch dts: Add QSPI nodes

Add pinctrl and SPI devices for QSPI on Koelsch.
Add Spansion s25fl512s SPI FLASH and MTD partitions.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit e02ee513eed4bb780848a5cedbd4b39afb395d3e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791 dtsi: Add QSPI node

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 4d5b59cde5b900a1f4a3a07a7a7b709dac1938f9)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch legacy: Add QSPI support

Enable support for the Spansion s25fl512s SPI FLASH on the Koelsch board:
  - Add QSPI platform device, resources, platform data, and pinmux,
  - Add FLASH data and MTD partitions.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit bcca4e8e5b6383cea9a2b310d5a964d8db18b9c7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r7s72100 dtsi: Add RSPI nodes

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 4b18e83f5d77c783d2d2092d0015ccda5fecaa8c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: genmai legacy: Add RSPI support

Add RSPI platform device, resources, platform data, and SPI child.

On this board, only rspi4 is in use. Its bus contains a single device
(a wm8978 audio codec).

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 664517474c4993c5d560d0e394c36583b7c99535)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Revert "ARM: shmobile: marzen: Conditionally select SMSC_PHY"

This reverts commit 317af6612ee29dfcb5ae04df9c58e9f79fc8d4ff.

This seems to prevent the board from booting now that the tree has been
rebased on v3.14-rc1.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit c73c7ff8d5b1f4ee0bb9cd7c57c37782954b2246)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: add sound support on defconfig

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 90bdadf5b05be16e7ba663ba8b9e42d20dcef861)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: add sound support

This patch adds sound support for Lager board.
But, it is using PIO transfer at this point.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[horms+renesas@verge.net.au: resolved conflicts]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit d58922ce8cadba7e758608fef9438bc183b46b0f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Lager USB0 cable detection workaround

Add Lager board code to check the PWEN GPIO signal and refuse to
allow probe of the USBHS driver in case of DIP misconfiguration.

For correct operation Lager DIP switches SW5 and SW6 shall be
configured in 2-3 position to enable USB Function support.

If the DIP switch is configured incorrectly then the user can
simply adjust the hardware and either reboot or use the bind interface
to try to probe again:

# echo renesas_usbhs > /sys/bus/platform/drivers/renesas_usbhs/bind

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 36be7686caa05334ca8d52df157b373a41d8d9f1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: bockw: use wp-gpios instead of WP pin

Latest Renesas Chip has some SDHI channels and the WP pin
availability depends on its channel or HW implementation.
Thus, this patch decides new policy whch indicates
WP is disabled as default.
But, we can use wp-gpios property to enable it as
other method.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit f729dd554e9a04a55950693ea8eca0d3aaa28d22)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch: Enable I2C in defconfig

This enables I2C support in koelsch_defconfig.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit ab44f75f1142edde5737203a0d259853f34686fb)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch: Add I2C support

This adds I2C[1245] busses support to Koelsch board.
I2C[03] do not have any slave devices connected and
are not used because of the following:
* I2C0 pins are multiplexed with LBSC pins;
* I2C3 pins are multiplexed with EtherMAC and VIN0 pins.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 12c1d5a54e874f26d08fa27f13f63ef7ccf38a2a)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Koelsch: pass Ether PHY IRQ

Pass Ether's PHY IRQ (which is IRQC's IRQ0) to the 'sh_eth' driver. Set the IRQ
trigger type to be low-level as per the Micrel PHY driver's setup.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 29d9f010d7103f2b83ce1c25999a6f3a1e57f5e2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Lager: pass Ether PHY IRQ

Pass Ether's PHY IRQ (which is IRQC's IRQ0) to the 'sh_eth' driver. Set the IRQ
trigger type to be low-level as per the Micrel PHY driver's setup.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 5812b8b2bcc35e7928c0e5616bbe35a0e97c7749)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Remove Lager USBHS UDC ifdefs

Remove ifdefs to make the Lager USBHS device always present.
This makes it more like other devices, no need to be special.

Also, these ifdefs by themselves do not hurt much, but combined
with USB Host device ifdefs that were proposed earlier we could
basically end up with a kernel that drives VBUS incorrectly
depending on the kernel configuration - lets not do that.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 235cda29e4d5047622ff9b82b1f0b4cb6cf95f6c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: Add USBHS support

This adds USBHS PHY and registers USBHS device if the driver is enabled.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 1eabe028f8aacd7367fbdda9596cd3d64659a49f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch: fix error return code check from clk_get()

The koelsch_add_standard_devices() function calls clk_get() but then fails
to check that it returns an error pointer instead of NULL on failure.

This was added by f31239ef ("ARM: shmobile: koelsch-reference:
Instantiate clkdevs for SCIF and CMT") in Simon Horman's
renesas-boards2-for-v3.14 tag.

The issue is not serious as it does not cause a crash and seems to not be
actually causing any issues now the other clock bugs have been fixed.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[horms+renesas@verge.net.au: tweaked changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit ca1187521b78ce4f980cd1b457f8c634dd401021)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: fix error return code check from clk_get()

The lager_add_standard_devices() function calls clk_get() but then fails
to check that it returns an error pointer instead of NULL on failure.

This was added by 4a606af2 ("ARM: shmobile: lager-reference: Instantiate
clkdevs for SCIF and CMT") patch in Simon Horman's renesas-boards2-for-v3.14
tag.

The issue is not serious as it does not cause a crash and seems to not be
actually causing any issues now the other clock bugs have been fixed.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[horms+renesas@verge.net.au: tweaked changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 7a543d8124e7e23190d36e7c57d3b9c394c4e4c1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: marzen: Conditionally select SMSC_PHY

The marzen board uses has an SMSC911X ethernet controller which uses an
SMSC phy. Select SMSC_PHY for marzen if SMSC911X is enabled to make use of the
SMSC-specific phy driver rather than relying on the generic phy driver.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 317af6612ee29dfcb5ae04df9c58e9f79fc8d4ff)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: mackerel: Conditionally select SMSC_PHY

The mackerel board uses has an SMSC911X ethernet controller which uses an
SMSC phy. Select SMSC_PHY for mackerel if SMSC911X is enabled to make use of the
SMSC-specific phy driver rather than relying on the generic phy driver.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit c5c2a294a4b24778cd3cab880bf05becee471edb)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: kzm9d: Conditionally select SMSC_PHY

The kzm9d board uses has an SMSC911X ethernet controller which uses an
SMSC phy. Select SMSC_PHY for kzm9d if SMSC911X is enabled to make use of the
SMSC-specific phy driver rather than relying on the generic phy driver.

This only covers the case of multiplatform kzm9d
as there is currently no Kconfig node for non-multiplatform kzm9d.
One could be added if desired.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 682100f59c0051e2b6f5af294da79df2419db157)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: ape6evm: enable CONFIG_DEVTMPFS in defconfig

DEVTMPFS is needed for udev

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 0771ddff31186836f62a20c42e7958bd37f7b4ed)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: armadillo: enable CONFIG_DEVTMPFS in defconfig

DEVTMPFS is needed for udev

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit a3b74d3e45f2e28e7c57d5c16a94b59c1a68dd09)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: bockw: enable CONFIG_DEVTMPFS in defconfig

This reverts commit e14ee5deab24200e4b70fe31a8c806f0acd3d37c
("ARM: shmobile: bockw: Do not enable CONFIG_DEVTMPFS defconfig").

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
[horms+renesas@verge.net.au: Added subject of reverted commit to changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit f921163add46d0dd8321f9d59496bbc17fb38850)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: genmai: enable CONFIG_DEVTMPFS in defconfig

DEVTMPFS is needed for udev

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 2304de6ef7479b12fa4529c12a53cac631a2c67b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: kzm9d: enable CONFIG_DEVTMPFS in defconfig

DEVTMPFS is needed for udev

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit c5aa40f8485b9b6aaeae14e5bddd5e569829ac2f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: kzm9g: enable CONFIG_DEVTMPFS in defconfig

DEVTMPFS is needed for udev

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 19bc39274b42052a198ae836c059652b65e2a21e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: enable CONFIG_DEVTMPFS in defconfig

DEVTMPFS is needed for udev

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
[horms+renesas@verge.net.au: resolved trivial conflict]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 6ea8b5ff7ca2d200875ddd774faa8ca40d990d86)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: mackerel: enable CONFIG_DEVTMPFS in defconfig

DEVTMPFS is needed for udev

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 97b3fbccfae2d1fee679073f1690e2428868754c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: marzen: enable CONFIG_DEVTMPFS in defconfig

This reverts commit 41307133da4b6f242ecbb45950b9d043c0b21b96
("ARM: shmobile: marzen: Do not enable CONFIG_DEVTMPFS defconfig").

DEVTMPFS is needed for udev.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
[horms+renesas@verge.net.au: Added subject of reverted patch to changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit edcde600a0bf778d98d945bd27f51c941e35bb8c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: Enable SATA in defconfig

This enables R-Car SATA and SCSI disk in lager_defconfig.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 0e02971e4047e61edc913c997ba9124df33d5112)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch: Enable DEVTMPFS_MOUNT in defconfig

Without this, a Debian jessie nfsroot hangs early in the boot process.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
[horms+renesas@verge.net.au: resolved trivial conflict]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 9a4e2a5a11efb7734dabef77a6e1515cbfdd9f42)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch: Enable SATA in defconfig

This enables block layer, R-Car SATA and SCSI disk in koelsch_defconfig.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 7f03e3bf2bca488e1471e00b6b8b74242b065020)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: Enable VIN along with ADV7180 decoder in defconfig

This enables R-Car VIN SoC camera along with ADV7180 decoder,
which can be found on Lager board, to lager_defconfig.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 5d738332973d1b33cd9fb77062d3959d6c7e7a74)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Add PCI USB host clock support

This adds internal PCI USB host clock support.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 012a7069b5a10a0851584d71a1facdc40a972319)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r7s72100: really add i2c clocks

Due to a merge conflict, addition of the clocks was lost. Tested with
RIIC2 on a genmai board. Others untested but hopefully trivial enough to
be added.

Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
[horms+renesas@verge.net.au: Capitalised "ARM" in subject]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 3440cb28627d7fbaf25c0d60cb9c6cf6d66d61ad)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: Add SATA clocks

This adds SATA[01] clock support to R8A7791 SoC.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 373ababd4896d6012871f03a3f6d96083dc50610)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: Add ZS clock

This adds fixed ratio zs_clk to R8A7791 clocks.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 5a6f994abbfde8e17671541db04399dfc4aebe62)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Add SATA clocks

This adds SATA[01] clock support to R8A7790 SoC.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
[horms+renesas@verge.net.au: resolved trivial conflicts]
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 64b7f9aca549db8a8bbcf68c911e9bd24efe76f7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Add VIN clock support

This adds VIN[0-3] clock support to R8A7790 SoC.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
[horms+renesas@verge.net.au: manually applied]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit b89dfdfad949798e1624dd2ff494bdb7ac943b04)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: add Audio DMAC support

R-Car H2 has many DMACs
(ex SYS-DMAC, 2D-DMAC, Audio-DMAC, USB-DMAC etc)
and, these DMAEngine needs DMA slave IDs to use it.

This patch adds new DMA slave ID list for r8a7790.
There, common part has RCAR_DMA_xxx prefix,
and Audio DMAC part has AUDIO_DMAC_SLAVE_xxx prefix.

Audio DMAC can be controlled via sh-dma-engine

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 2c578a1be846bde49cb0a916c20f526f27b59e89)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: add Audio DMAC clock

Audio DMAC can be controlled via sh-dma-engine

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit f5b2947e4a6589f07d485ca149d606283294979f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: Wait for status on all MSTP clocks

When enabling a module clock by clearing its bit in the MSTP control
register, the CPG requires waiting for the status register to signal
that the clock has started. Failure to do so will result in returning
from the clk_enable() call with the clock potentially still disabled,
leading to various race conditions and difficult to debug errors.

Enable status wait for all MSTP clocks on the r8a7791.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit dd6fc76d2f61e732a14f3592bdd83c2c0b7d2dcc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: emev2: Use __initconst for const init definition

__initconst must be used instead of __initdata for
const init definitions.

This problem was introduced by 3d5de27174955702 ("mach-shmobile: Emma
Mobile EV2 DT support V3") in v3.4-rc7.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit d24d1780c340777942061ef3445edcf228e8d35b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7779: Remove unused clock constants

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
(cherry picked from commit d690f4681ceddeb3f077c661a19af0b8e0411ae7)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Remove duplicate shmobile_invalidate_start() declaration

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 891fa525dc29cbed3ef0b74d5e0ab2fb5233f9a6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: Add VIN clocks

This adds VIN[0-2] clock support to R8A7791 SoC.

Changes in V2:
* none.

Changes in V3:
* capitalized ARM in the subject.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 5f3fbe63b39923294cfd4bce84ab16948467d30f)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: Add I2C clocks

This adds I2C[0-5] clock support to R8A7791 SoC.

Changes in V2:
* Capitalized ARM in the subject.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 106c0e8fa3a2f7a40d25583e193e34af3861564d)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Wait for status on all MSTP clocks

When enabling a module clock by clearing its bit in the MSTP control
register, the CPG requires waiting for the status register to signal
that the clock has started. Failure to do so will result in returning
from the clk_enable() call with the clock potentially still disabled,
leading to various race conditions and difficult to debug errors.

Enable status wait for all MSTP clocks on the r8a7790.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit cb9ec3adf882688831cdc9e7b84bb388f215f8ce)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7779: Wait for status on selected MSTP clocks

When enabling some of the module clocks by clearing stop bits in the
MSTP control registers, the CPG requires waiting for the status
registers to signal that the clocks have started. Failure to do so will
result in returning from the clk_enable() call with the clock
potentially still disabled, leading to various race conditions and
difficult to debug errors.

Enable status wait for all the r8a7779 MSTP clocks that report their
status.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 017410f686b8d9928ce30e4eb146175ea672f4c9)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: bockw: Sort Kconfig node's selections

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 2b2fd2755182d43e149259330c7b1fe0aa3243d6)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: armadillo800eva: Conditionally select SMSC_PHY

The armadillo800eva board uses has an SH ethernet controller which uses an
SMSC phy. Select SMSC_PHY for koelsch if SH_ETH is enabled to make use of the
SMSC-specific phy driver rather than relying on the generic phy driver.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 6a517b114d007a35fc264ef16b09db35548f0290)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: ape6evm: Conditionally select SMSC_PHY

The ape6evm board uses has an SMSC911X ethernet controller which uses an
SMSC phy. Select SMSC_PHY for ape6evm if SMSC911X is enabled to make use of the
SMSC-specific phy driver rather than relying on the generic phy driver.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 9edaca863ea6807aca7bb8aa5c7791f7387f6022)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch: Add SATA0 support

This adds SATA0 support to Koelsch board.
SATA1 is not available since its pinmux
configuration is fixed to PCIe.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 4fc0a0b93f178c0b077201ab70a53e1be6a69054)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: Add SATA support

This adds SATA support to Lager board. Only SATA1 port is available.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: resolved trivial conflicts]
[horms+renesas@verge.net.au: capitalised "ARM" in subject]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 1e0d2c495316862fa3da73150ee86ba30c9faf0c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: Make spi_flash_data const

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit d422c451a9795c7a10c3ae1ab7ca87ce7518546b)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: kzm9d: Use common clock framework

Use common clock framework version of clock
 drivers/clk/shmobile/clk-emev2.c
instead of sh-clkfwk version
 arch/arm/mach-shmobile/clock-emev2.c
when it is configured as a part of multi-platform.

Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit ef5ecd1f20de2d1919714f029f5016bf6d061e66)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: Add VIN1 SoC camera support

This adds VIN1 SoC camera along with ADV7180 subdevice support to Lager.
VIN0 camera is not registered because it has ADV7612 I2C subdevice
which is not supported yet.

Changes in V2:
* made lager_add_vin_device function static.

Changes in V3:
* capitalized ARM in the subject.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 094a804aa6943de0e9939e1c48341e87be93b3d2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: mach-shmobile: kzm9g: add zboot support

Adds support to run the kernel on the uninitialized KZM9G board, using for
instance the mask ROM boot loader or JTAG. This patch tries to emulate the
style of the corresponding "mackerel" implementation. The DRAM controller
setup code has been adapted from u-boot.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit a56585d12cbe8903dcc71332579b9e2e0807fe44)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch: Conditionally select MICREL_PHY for Multiplatform

The koelsch board uses has an SH ethernet controller which uses a Micrel
phy. Select MICREL_PHY for koelsch if SH_ETH is enabled to make use of the
Micrel-specific phy driver rather than relying on the generic phy driver.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit aefe88ba044bdcd91bc0cd1e75ab2dc524ed5107)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: bockw: add USB Func DMAEngine support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit f3ffa47c8d563d8ea3e378fa59aca5dde9624a01)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: bockw: use HPBIF DMAEngine for sound

R-Car sound driver is supporting Mem <-> SRU <-> SSI
transfer via DMAEngine.
The sound will be less noise if it uses SRU path
since it has FIFO.
This patch supports it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 88bf7f6846dea22bd50f8abf4c30530bbe2b6424)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: bockw: use SSI DMAEngine for sound

R-Car sound driver is supporting Mem <-> SSI
direct transfer via DMAEngine.
Current HPB-DMA is using double plane transfer,
but the sound may have noise since SSI doesn't have FIFO.
This patch supports it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 6d0ef79743abd39c1867a7fb9eaccdda0b2136db)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Lager: conditionally select CONFIG_MICREL_PHY

Now that support for KSZ8041RNLI is added to the Micrel PHY driver and we intend
to support PHY IRQs on the Lager board, we have to enable the Micrel driver.
Do this by selecting CONFIG_MICREL_PHY for Lager if CONFIG_SH_ETH is enabled.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit a2a4759b5262979cbe4bc1f681ec5a6ab064fce3)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Replace IRQ type numerical values with macros

Replace the hardcoded value 4 with IRQ_TYPE_LEVEL_HIGH.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 1f4c745b2c5a083c49dc11d2f0827d9a381f1ee1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Fix serial ports DT compatible strings

Remove the -generic suffix that has been added by mistake from the
serial port compatible strings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 59d2b5173bbe8dbc324e34263ceae4d6131058f2)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: lager: Enable SATA1 in r8a7790-lager.dts

This enables SATA1 in Lager device tree.
SATA0 is not available on Lager since its
pinmux is fixed to USB3.0.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit c6181b9f06b0821e8d34e47174e044801f03edce)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Add SATA nodes to r8a7790.dtsi

This adds SATA[01] device nodes to r8a7790.dtsi

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit cde630f763b07ff5d8ff7d34969f9dd05a2a4001)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch: Enable SATA0 in r8a7791-koelsch.dts

This enables SATA0 in Koelsch device tree.
SATA1 is not available on Koelsch since
its pinmux configuration is fixed to PCIe.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 760c277b23973a3db181b2ae98d9a87f6e8f843e)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: Add SATA nodes to r8a7791.dtsi

This adds SATA[01] device nodes to r8a7791.dtsi.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit b8532c699a163702bfcadaaa4c23c4ff71b67eec)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: Add SATA clocks to device tree

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 65f05c38749f393f775c360b9b247fa4d63b72de)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Add SATA clocks to device tree

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit bccccc3d861567876a87441bc92f2e3b46cb38a9)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: Add VIN clocks to device tree

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 09c983463dd576d005c95dfdc0997f064629d321)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Add VIN clocks to device tree

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 3f2beaa9f2d7229c041975e40868dee2e3c4a598)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Add serial ports to the device tree

The platform code serial port instantiation mechanism is kept for the
non-DT platforms only.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 597af20fa8f810a26c84179a8ac58cb3fce6c102)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: Add serial ports to the device tree

Add all serial ports marked as disabled.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 9640cf259c9496d56bf44df8ae86f00f7b417ecc)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7790: Add thermal clock in device tree

Add the missing thermal MSTP clock to the thermal device node.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit d3a439dbe3ff1610156c39cdffcc2c3257fadd62)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7791: Add thermal clock in device tree

Add the missing thermal MSTP clock to the thermal device node.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 563bc8eb0243783afd7a71204ad696e8bdf44391)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: koelsch: (1+1)GiB memory in DT

Fix dts to have memory 1GiB @ 0_4000_0000 + 1GiB @ 2_0000_0000
according to Koelsch's hardware manual.

Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 4cd1bad45182c7f1426353d73a481e0260d236b1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: Add GPIO keys to Koelsch DTS

The Koelsh reference device tree is going away, copy the missing GPIO
keys device node to the Koeslch device tree file.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit aff5274fdc5b53a44d906c39a834efa6ba9c30ef)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: dts: Remove r8a7791-koelsch-reference.dts

The dts file has been superseded by r8a7791-koelsch.dts and been removed
from the ARCH_SHMOBILE_LEGACY dtb target. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit 52e62f7f4b25d4f087395f805768e985e9d91bd0)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: sh-msiof: Convert to spi core auto_runtime_pm framework

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit e2a0ba547ba31cd7b217cc948d93e4edc78cbcb1)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: sh-msiof: Remove "renesas,msiof-sh7724" from bindings

It's not implemented in the driver, so it's a bad example.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit f9ee821ebc5e58ff5da08d625ea4e2d74b221317)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: sh-msiof: Kill sh_msiof_spi_bits and sh_msiof_spi_hz functions

In the implementation of __spi_validate(), spi core will set transfer
bits_per_word and max speed as spi device default if it is not set for
this transfer. So we can remove the same implementation in this driver.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit b14158603288b9d898716b41f2f0acb7d49dad2c)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

spi: sh-msiof: Use core message handling instead of spi-bitbang

The only remaining feature of spi-bitbang used by this driver is the
chipselect() callback, which just does conditional GPIO.
This is handled fine by the SPI core's spi_set_cs(), hence switch the
driver to use the core message handling through our own transfer_one()
method.

As the (optional) GPIO CS is no longer deasserted at spi_master.setup()
time (through spi_bitbang_setup() and the spi_bitbang.chipselect()
callback), we now have to take care of that ourselves.

Remove the call to spi_master_put() in sh_msiof_spi_remove(), as our SPI
master is now registered using devm_spi_register_master()
(spi_bitbang_start() uses the non-managed version).

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 1bd6363bc0c69ff6120b53daa35cf9459c3628ad)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>