Andrei Emeltchenko [Tue, 29 May 2012 10:59:17 +0000 (13:59 +0300)]
Bluetooth: A2MP: Manage incoming connections
Handle incoming A2MP connection by creating AMP manager and
processing A2MP messages.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:16 +0000 (13:59 +0300)]
Bluetooth: A2MP: Handling fixed channels
A2MP fixed channel do not have sk
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:15 +0000 (13:59 +0300)]
Bluetooth: A2MP: Process A2MP Command Responses
Process A2MP responses, print cmd code and ident for now.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:14 +0000 (13:59 +0300)]
Bluetooth: A2MP: Process A2MP Disc Physlink Request
Placeholder for A2MP Disconnect Physlink Request.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:13 +0000 (13:59 +0300)]
Bluetooth: A2MP: Process A2MP Create Physlink Request
Placeholder for A2MP Create Physlink Request.
Handles requests with invalid controler id as shown below:
...
> ACL data: handle 11 flags 0x02 dlen 50
A2MP: Create Physical Link req: local id 1 remote id 85
Assoc data:
<skipped>
< ACL data: handle 11 flags 0x00 dlen 15
A2MP: Create Physical Link rsp: local id 85 remote id 1 status 1
Invalid Controller ID
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:12 +0000 (13:59 +0300)]
Bluetooth: A2MP: Process A2MP Get AMP Assoc Request
Example trace when receiving AMP Assoc Request with wrong AMP id.
...
> ACL data: handle 11 flags 0x02 dlen 13
A2MP: Get AMP Assoc req: id 238
< ACL data: handle 11 flags 0x00 dlen 14
A2MP: Get AMP Assoc rsp: id 238 status (1) Invalid Controller ID
assoc data:
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:11 +0000 (13:59 +0300)]
Bluetooth: A2MP: Process A2MP Get Info Request
Process A2MP Get Info Request.
Example of trace log for invalid controller id is shown below:
...
> ACL data: handle 11 flags 0x02 dlen 13
A2MP: Get Info req: id 238
< ACL data: handle 11 flags 0x00 dlen 30
A2MP: Get Info rsp: id 238 status (1) Invalid Controller ID
...
Note that If the Status field is set to Invalid Controller ID all subsequent
fields in the AMP Get Info Response shall be ignored by the receiver.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:10 +0000 (13:59 +0300)]
Bluetooth: A2MP: Process A2MP Change Notify
Placeholder for A2MP Change Notify handler.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:09 +0000 (13:59 +0300)]
Bluetooth: A2MP: Process A2MP Discover Request
Adds helper functions to count HCI devs and process A2MP Discover
Request, code makes sure that first controller in the list is
BREDR one. Trace is shown below:
...
> ACL data: handle 11 flags 0x02 dlen 16
A2MP: Discover req: mtu/mps 670 mask: 0x0000
< ACL data: handle 11 flags 0x00 dlen 22
A2MP: Discover rsp: mtu/mps 670 mask: 0x0000
Controller list:
id 0 type 0 (BR-EDR) status 0x01 (Bluetooth only)
id 1 type 1 (802.11 AMP) status 0x01 (Bluetooth only)
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:08 +0000 (13:59 +0300)]
Bluetooth: A2MP: Process A2MP Command Reject
Placeholder for future A2MP Command Reject handler.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:07 +0000 (13:59 +0300)]
Bluetooth: A2MP: Process A2MP messages
Implement basic processing for AMP Manager Protocol (A2MP).
Example below shows processing unrecognized command.
...
> ACL data: handle 11 flags 0x02 dlen 12
A2MP: code 0x00 ident 3 len 0
< ACL data: handle 11 flags 0x00 dlen 14
A2MP: Command Reject: reason (0) - Command not recognized
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:06 +0000 (13:59 +0300)]
Bluetooth: A2MP: Define A2MP status codes
A2MP status codes copied from Bluez patch sent by Peter Krystad
<pkrystad@codeaurora.org>.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:05 +0000 (13:59 +0300)]
Bluetooth: A2MP: Definitions for A2MP commands
Define A2MP command IDs and packet structures.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:04 +0000 (13:59 +0300)]
Bluetooth: A2MP: Add chan callbacks
Add L2CAP chan ops callbacks.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:03 +0000 (13:59 +0300)]
Bluetooth: A2MP: Build and Send msg helpers
Helper function to build and send A2MP messages.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:02 +0000 (13:59 +0300)]
Bluetooth: A2MP: AMP Manager basic functions
Define AMP Manager and some basic functions.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 10:59:01 +0000 (13:59 +0300)]
Bluetooth: A2MP: Create A2MP channel
Create and initialize fixed A2MP channel
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Tue, 29 May 2012 07:04:05 +0000 (10:04 +0300)]
Bluetooth: trivial: Use defined PSMLEN instead of magic
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Gustavo Padovan [Mon, 28 May 2012 01:27:58 +0000 (22:27 -0300)]
Bluetooth: check for already existent channel before create new one
Move this check to before the channel time creation simplifies the code
and avoid memory allocation if the channel already exist.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Mon, 28 May 2012 01:27:55 +0000 (22:27 -0300)]
Bluetooth: Move check for backlog size to l2cap_sock.c
Remove socket specific code from l2cap_core.c
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Mon, 28 May 2012 01:27:54 +0000 (22:27 -0300)]
Bluetooth: Use chan->state instead of sk->sk_state
These vars are kept in sync so we can use chan->state here.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Andrei Emeltchenko [Mon, 28 May 2012 01:27:53 +0000 (22:27 -0300)]
Bluetooth: Add l2cap_chan->ops->ready()
This move socket specific code to l2cap_sock.c.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Andrei Emeltchenko [Mon, 28 May 2012 01:27:52 +0000 (22:27 -0300)]
Bluetooth: Move clean up code and set of SOCK_ZAPPED to l2cap_sock.c
This remove a bit more of socket code from l2cap core, this calls set the
SOCK_ZAPPED and do some clean up depending on the socket state.
Reported-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Mon, 28 May 2012 01:27:51 +0000 (22:27 -0300)]
Bluetooth: Use chan as parameters for l2cap chan ops
Use chan instead of void * makes more sense here.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Sasha Levin [Sun, 27 May 2012 20:36:56 +0000 (22:36 +0200)]
Bluetooth: Really fix registering hci with duplicate name
Commit fc50744 ("Bluetooth: Fix registering hci with duplicate name") didn't
fully fix the duplicate naming issue with devices, and duplicate device names
could still be created:
[ 142.484097] device: 'hci1': device_add
[...]
[ 150.545263] device: 'hci1': device_add
[ 150.550128] kobject: 'hci1' (
ffff880014cc4e58): kobject_add_internal: parent: 'bluetooth', set: 'devices'
[ 150.558979] ------------[ cut here ]------------
[ 150.561438] WARNING: at fs/sysfs/dir.c:529 sysfs_add_one+0xb0/0xd0()
[ 150.572974] Hardware name: Bochs
[ 150.580502] sysfs: cannot create duplicate filename '/devices/virtual/bluetooth/hci1'
[ 150.584444] Pid: 7563, comm: trinity-child1 Tainted: G W 3.4.0-next-
20120524-sasha #296
[...]
Instead of the weird logic and the attempt at keeping the device list sorted,
just use an IDA.
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Fri, 25 May 2012 12:30:56 +0000 (09:30 -0300)]
Bluetooth: Use l2cap_chan_ready() in LE path
This replace code in l2cap_le_conn_ready() by a similar code in
l2cap_chan_ready().
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Fri, 25 May 2012 12:30:53 +0000 (09:30 -0300)]
Bluetooth: Remove extra l2cap_state_change(BT_CONNECTED)
This is already performed inside l2cap_chan_ready(), so we don't need it
here again.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Fri, 25 May 2012 21:57:05 +0000 (18:57 -0300)]
Bluetooth: Get a more accurate L2CAP PDU len
Both FCS and Extended header might be or might not be present in a ERTM
channel.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Andrei Emeltchenko [Fri, 25 May 2012 12:09:26 +0000 (15:09 +0300)]
Bluetooth: Define HCI AMP cmd struct
Add HCI commands to deal with Bluetooth AMP controllers.
Those commands will be used by bluetooth and softamp code.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Andrei Emeltchenko [Fri, 25 May 2012 08:38:27 +0000 (11:38 +0300)]
Bluetooth: Use __constant modifier in HCI code
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Andrei Emeltchenko [Thu, 24 May 2012 12:42:51 +0000 (15:42 +0300)]
Bluetooth: Use __constant when dealing with constants
__constant_cpu_to_le16() is the right go here.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andrei Emeltchenko [Thu, 24 May 2012 12:42:50 +0000 (15:42 +0300)]
Bluetooth: Define and use PSM identifiers
Define assigned Protocol and Service Multiplexor (PSM) identifiers
and use them instead of magic numbers.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Gustavo Padovan [Thu, 24 May 2012 06:36:37 +0000 (03:36 -0300)]
Bluetooth: Use lmp_ssp_capable() macro
Make the check more user friendly.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Bing Zhao [Thu, 24 May 2012 01:50:04 +0000 (18:50 -0700)]
Bluetooth: btmrvl: add SD8787 Bluetooth AMP device ID
SD8787 SDIO function 3 (device ID 0x911B) is for Bluetooth AMP.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Wed, 23 May 2012 21:59:30 +0000 (14:59 -0700)]
Bluetooth: Send a configuration request after security confirmation
Sometimes an ACL link must be raised to a higher security level after
an L2CAP connection is requested, but before a connection response is
sent. In this case, a connection response sent by L2CAP was not
immediately followed by a configuration request. Other code paths do
send this configuration request right away. It was possible for the
connection to stall while L2CAP waited for the remote device (like
PTS) to trigger the configuration process.
Here is an abbreviated hcidump of the failure case with PTS:
1337806446.051982 > ACL data: handle 43 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
1337806446.052050 < ACL data: handle 43 flags 0x00 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x000000b8
1337806446.595320 > ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 4097 scid 0x0041
1337806446.595673 < ACL data: handle 43 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 1 status 0
1337806446.595679 < ACL data: handle 43 flags 0x00 dlen 10
L2CAP(s): Info req: type 2
1337806446.669835 > ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x00000028
1337806446.669899 < HCI Command: Authentication Requested (0x01|0x0011) plen 2
1337806446.669906 < ACL data: handle 43 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 1 status 1
<security setup here>
1337806446.769888 < ACL data: handle 43 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0
At this point, the connection stalls and no further messages are sent
on the L2CAP signaling channel. No data is received either.
If we immediately send a configuration request after a successful connect
response, the connection completes:
1337724090.041162 > ACL data: handle 43 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
1337724090.041236 < ACL data: handle 43 flags 0x00 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x000000b8
1337724090.597128 > ACL data: handle 43 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 4097 scid 0x0041
1337724090.597236 < ACL data: handle 43 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 1 status 0
1337724090.597244 < ACL data: handle 43 flags 0x00 dlen 10
L2CAP(s): Info req: type 2
1337724090.660842 > ACL data: handle 43 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x00000028
1337724090.660926 < HCI Command: Authentication Requested (0x01|0x0011) plen 2
1337724090.660934 < ACL data: handle 43 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 1 status 1
<security setup here>
1337724090.755162 < ACL data: handle 43 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0
1337724090.755171 < ACL data: handle 43 flags 0x00 dlen 23
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 11
1337724091.361847 > ACL data: handle 43 flags 0x02 dlen 29
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 15
1337724091.863808 > ACL data: handle 43 flags 0x02 dlen 23
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 11
1337724091.863882 < ACL data: handle 43 flags 0x00 dlen 29
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 15
1337724092.683745 > ACL data: handle 43 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 4097]
0000: 00 00 11 22 33 44 34 2f ..."3D4/
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Andrei Emeltchenko [Wed, 23 May 2012 12:44:06 +0000 (15:44 +0300)]
Bluetooth: Define L2CAP conf continuation flag
Define Continuation flag which the only flag used from Flags field
in L2CAP Configuration Request and Response.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Wed, 23 May 2012 07:04:23 +0000 (04:04 -0300)]
Bluetooth: Remove unneeded EXPORT_SYMBOL
After l2cap, sco and bluetooth modules merge some symbols doesn't need to
be exported anymore.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Wed, 23 May 2012 07:04:22 +0000 (04:04 -0300)]
Bluetooth: Remove unnecessary headers include
Most of the include were unnecessary or already included by some other
header.
Replace module.h by export.h where possible.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Wed, 23 May 2012 07:04:21 +0000 (04:04 -0300)]
Bluetooth: Fix coding style in the subsystem
This is some leftover from the last patches that fixed style. It is mostly
line over 80 characters fixes reported by checkpatch.pl.
checkpatch.pl is clean for these files now.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Wed, 23 May 2012 07:04:20 +0000 (04:04 -0300)]
Bluetooth: Fix coding style in include/net/bluetooth
Fix all warning and errors reported by checkpatch but license trailing
whitespace and bdaddr_t definition.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Wed, 23 May 2012 07:04:19 +0000 (04:04 -0300)]
Bluetooth: Remove 'register' usage from the subsystem
Let the compiler chooses what is best.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Wed, 23 May 2012 07:04:18 +0000 (04:04 -0300)]
Bluetooth: Remove most of the inline usage
Only obvious cases were left as inline, mostly oneline functions.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Andrei Emeltchenko [Wed, 23 May 2012 08:31:23 +0000 (11:31 +0300)]
Bluetooth: trivial: Remove empty line
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Andrei Emeltchenko [Wed, 23 May 2012 08:31:22 +0000 (11:31 +0300)]
Bluetooth: Preserve L2CAP flags values
Previous callers of l2cap_build_conf_rsp in l2cap_config_req use
flags instead of continuation flag hardcoded value. It does not change
logic and preserve future possible flags.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Andrei Emeltchenko [Wed, 23 May 2012 08:31:20 +0000 (11:31 +0300)]
Bluetooth: Use defined link key size
Remove magic number with defined link key size.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Szymon Janc [Wed, 23 May 2012 10:35:46 +0000 (12:35 +0200)]
Bluetooth: Rename HCI_QUIRK_NO_RESET to HCI_QUIRK_RESET_ON_CLOSE
HCI_QUIRK_NO_RESET name is misleading - purpose of this quirk is to
reset device on close instead of init, not to not reset at all.
Rename it to HCI_QUIRK_RESET_ON_CLOSE to avoid confusion.
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Tue, 22 May 2012 22:00:20 +0000 (19:00 -0300)]
Bluetooth: Fix trailing whitespaces in license text
As reported by checkpatch.pl
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Mon, 21 May 2012 16:58:22 +0000 (13:58 -0300)]
Bluetooth: Remove dead int returns
These functions were returning always 0, we just make then void.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Mon, 21 May 2012 16:58:21 +0000 (13:58 -0300)]
Bluetooth: Remove double check for BT_CONNECTED
The same check is done just before call l2cap_streaming_send()
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Andrei Emeltchenko [Mon, 21 May 2012 12:47:46 +0000 (15:47 +0300)]
Bluetooth: Silent sparse warnings
Silence warnings below:
net/bluetooth/l2cap_core.c:1662:24: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:1662:27: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:1683:24: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:1683:27: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:2260:46: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:2574:33: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:2581:33: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:4556:24: warning: Using plain integer
as NULL pointer
net/bluetooth/l2cap_core.c:4556:27: warning: Using plain integer
as NULL pointer
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Gustavo Padovan [Fri, 18 May 2012 23:22:38 +0000 (20:22 -0300)]
Bluetooth: Do not purge queue in Basic Mode
chan->tx_q is only initialized if we use ERTM or Streaming mode.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Mat Martineau [Fri, 18 May 2012 03:53:55 +0000 (20:53 -0700)]
Bluetooth: Enable ERTM by default
This enables the new receive and transmit state machines.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:54 +0000 (20:53 -0700)]
Bluetooth: Remove unused ERTM control field macros
Now that l2cap_ctrl is used to set up control fields, these macros are
not needed.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:53 +0000 (20:53 -0700)]
Bluetooth: Set txwin values for streaming mode
The transmit window values must be configured for streaming mode, even
though streaming mode does not have a window. This enables use of
extended headers when the transmit window socket option is set to 64
or larger.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:52 +0000 (20:53 -0700)]
Bluetooth: Remove unneccesary inline
Let the compiler decide if inlining is appropriate.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:51 +0000 (20:53 -0700)]
Bluetooth: Simplify the ERTM ack timeout
Since l2cap_send_ack can trigger extra actions like sending iframes,
don't call it. Just send an RR or RNR frame if an ack needs sending.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:50 +0000 (20:53 -0700)]
Bluetooth: Use the ERTM transmit state machine from timeout handlers
Different states have different actions for retransmit and monitor
timeouts, so remove the logic for those actions from the timer handlers.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:49 +0000 (20:53 -0700)]
Bluetooth: Check rules when setting retransmit or monitor timers
The ERTM specification requires the retransmit timer to be cancelled
when the monitor timer is set. The retransmit timer cannot be set
again while the monitor timer is pending.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:48 +0000 (20:53 -0700)]
Bluetooth: Use new header structures in l2cap_send_rr_or_rnr
struct l2cap_ctrl is now used, and the sframe is now sent directly
rather than depending on a separate call.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:47 +0000 (20:53 -0700)]
Bluetooth: Handle incoming REJ frames
REJ frames are sent by the remote device to request that all frames
after a given sequence number be retransmitted. These are also an
implicit indication that the remote device is not in a busy state and
can receive new iframes.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:46 +0000 (20:53 -0700)]
Bluetooth: Handle SREJ requests to resend unacked frames
When a remote device sends an SREJ, retransmit the frame with the
corresponding sequence number (subject to special cases with poll and
final flags). An SREJ is also an implicit indication the the remote
device is not in a busy state.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:45 +0000 (20:53 -0700)]
Bluetooth: Reassemble all available data when retransmissions succeed.
As retransmitted packets arrive, attempt to reassemble SDUs. If all
requested retransmissions have been received, acknowledge them and
transition back to the RECV state.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:44 +0000 (20:53 -0700)]
Bluetooth: Send SREJ frames when packets go missing
The ERTM specification lays out three scenarios for sending SREJ
frames to request retransmission of specific frames. l2cap_send_srej
requests all frames up to a given txseq that are not already queued
for reassembly. l2cap_send_srej_tail only requests the most recent
missing frame. l2cap_send_srej_list resends SREJ frames for data that
was requested for resend but never received.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:43 +0000 (20:53 -0700)]
Bluetooth: Add implementation for retransmitting all unacked frames
This adds l2cap_ertm_resend to retransmit frames based on the sequence
numbers in chan->retrans_list. If the retransmit limit is reached for
any individual frame is reached, the connection is dropped. skbs that
are cloned already are copied to avoid modifying shared data (this is
uncommon). To retransmit all frames, l2cap_retransmit_all now builds
a list of all unacked sequence numbers and then calls
l2cap_ertm_resend.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:42 +0000 (20:53 -0700)]
Bluetooth: Add the ERTM receive state machine
This adds a top-level state machine with handlers for two receive
states defined in the ERTM spec, RECV and SREJ_SENT. The reqseq value
of the incoming frame is also validated at the top level and a
disconnection is forced if it is invalid. The actions for the RECV
and SREJ_SENT states are implemented according to the state tables in
the ERTM specification.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:41 +0000 (20:53 -0700)]
Bluetooth: Update l2cap_send_i_or_rr_or_rnr to fit the spec better
This action now exactly matches what is defined in the ERTM
specification, including clearing the remote busy flag and setting the
retransmit timer rather than retransmitting frames directly. The spec
does not retransmit frames as part of this action, since
retransmission is only triggered by REJ, SREJ, or an RR with the final
bit set. struct l2cap_ctrl is also used to set up header values.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:40 +0000 (20:53 -0700)]
Bluetooth: Use the transmit state machine for busy state changes
This lets the transmit state machine handle local busy state changes,
since different actions are taken in the different transmit states.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:39 +0000 (20:53 -0700)]
Bluetooth: Refactor l2cap_send_ack
The function now encapsulates more of the logic to either immediately
send an ack if the transmit window is over 75% full, or wait for the
ack timer to expire if the transmit window is not full enough. It is
also able to push out waiting iframes that can carry an
acknowledgement.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:38 +0000 (20:53 -0700)]
Bluetooth: Remove receive code that has been superceded
This deletes the receive code that had handlers for each frame type at
the top level, and then had logic to determine the receive state
within each handler.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:37 +0000 (20:53 -0700)]
Bluetooth: Add streaming mode receive and incoming packet classifier
Streaming mode reception is fairly simple, with in-sequence frames
being reassembled as they arrive. Out-of-sequence frames are dropped,
and also clear any partially-assembled SDUs that may exist.
The packet classifier determines if the txseq value of the incoming
packet is expected, invalid (resulting in a disconnection), invalid
(ignorable), duplicate, or having to do with an SREJ request that was
previously sent. The rules for each classification are defined in the
ERTM specification, and consolidating these rules in one place helps
clarify the receive state machine.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:36 +0000 (20:53 -0700)]
Bluetooth: Consolidate common receive code for ERTM and streaming mode
Creates a new l2cap_data_rcv function that combines previous code from
l2cap_ertm_data_rcv and l2cap_data_channel. This reduces duplicate
code for streaming mode, and sets up a framework for the ERTM receive
state machine.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:35 +0000 (20:53 -0700)]
Bluetooth: Refactor l2cap_send_sframe
The new implementation uses struct l2cap_ctrl to set up the sframe
fields, and also reduces duplicate acks by canceling the ack timer
whenever an RR or RNR frame is sent. sframe PDU generation is also
split in to a separate function to separate it from the logic related
to the connection state and sframe type.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:34 +0000 (20:53 -0700)]
Bluetooth: Refactor l2cap_ertm_send
The new implementation is aware of the new transmit state machine, and
uses struct l2cap_ctrl to compose ERTM headers. It also has improved
error handling for allocation failures, and does not send the packet
until after all skb and channel data structures are updated.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:33 +0000 (20:53 -0700)]
Bluetooth: Refactor l2cap_streaming_send
This new implementation uses struct l2cap_ctrl to compose the
streaming mode headers.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:32 +0000 (20:53 -0700)]
Bluetooth: Add a new L2CAP ERTM transmit state machine.
This implements a top-level transmit state machine with handlers for
the two ERTM states defined in the specification: XMIT and WAIT_F.
The state machine accepts an event and, optionally, a list of skbs to
transmit. In addition to data transmission, the local busy state can
be modified, acks are processed, and monitor and retransmit timeouts
are handled. This mirrors the structure of the state tables in the
spec.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 03:53:31 +0000 (20:53 -0700)]
Bluetooth: Change default state of ERTM disable flag
This is to allow for ERTM state machine replacement in the patches
that follow.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Mat Martineau [Fri, 18 May 2012 04:14:09 +0000 (21:14 -0700)]
Bluetooth: Fix early return from l2cap_chan_del
This fixes a regression from commit
2ead70b8390d199ca04cd35311b51f5f3676079e that is present in all
kernels starting at v3.0.
When L2CAP information was moved to struct l2cap_chan, a check was
added to l2cap_chan_del to avoid certain cleanup operations when ERTM
or streaming mode had not yet been initialized. The logic in the
check did not take in to account that chan->conf_state is set to 0 in
l2cap_chan_ready, so l2cap_chan_del failed to cancel timers and leaked
memory any time the ERTM queues or lists were not empty.
This change makes sure that l2cap_chan_del only returns early if
ERTM initialization was not performed.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Mat Martineau [Thu, 17 May 2012 23:20:14 +0000 (16:20 -0700)]
Bluetooth: Free allocated ERTM SREJ list if init fails
If the ERTM SREJ list is properly allocated but the retransmit list
allocation fails, the SREJ list must be freed before returning from
l2cap_ertm_init. l2cap_chan_del will not clean up the SREJ list
if l2cap_ertm_init returns a failure code.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Thu, 17 May 2012 03:36:26 +0000 (00:36 -0300)]
Bluetooth: Fix coding style in hci_core.c
Follow net subsystem rules.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Thu, 17 May 2012 03:36:25 +0000 (00:36 -0300)]
Bluetooth: Fix coding style in hci_conn.c
Follow net subsystem rules.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Thu, 17 May 2012 03:36:24 +0000 (00:36 -0300)]
Bluetooth: Fix coding style in hci_event.c
Follow the net subsystem rules.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Thu, 17 May 2012 03:36:23 +0000 (00:36 -0300)]
Bluetooth: Fix coding style in hci_sysfs.c
Follow the net subsystem rules.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Thu, 17 May 2012 03:36:22 +0000 (00:36 -0300)]
Bluetooth: Fix coding style in hci_sock.c
Follow the net subsystem rules.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Thu, 17 May 2012 03:36:21 +0000 (00:36 -0300)]
Bluetooth: Fix coding style in sco.c
Follow the net subsystem rules.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Gustavo Padovan [Thu, 17 May 2012 03:36:20 +0000 (00:36 -0300)]
Bluetooth: Fix coding style in mgmt.c
Follow the coding style of the net subsystem.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Linus Torvalds [Sun, 3 Jun 2012 01:29:26 +0000 (18:29 -0700)]
Linux 3.5-rc1
Linus Torvalds [Sun, 3 Jun 2012 00:39:40 +0000 (17:39 -0700)]
Merge tag 'dm-3.5-changes-1' of git://git./linux/kernel/git/agk/linux-dm
Pull device-mapper updates from Alasdair G Kergon:
"Improve multipath's retrying mechanism in some defined circumstances
and provide a simple reserve/release mechanism for userspace tools to
access thin provisioning metadata while the pool is in use."
* tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
dm thin: provide userspace access to pool metadata
dm thin: use slab mempools
dm mpath: allow ioctls to trigger pg init
dm mpath: delay retry of bypassed pg
dm mpath: reduce size of struct multipath
Joe Thornber [Sat, 2 Jun 2012 23:30:01 +0000 (00:30 +0100)]
dm thin: provide userspace access to pool metadata
This patch implements two new messages that can be sent to the thin
pool target allowing it to take a snapshot of the _metadata_. This,
read-only snapshot can be accessed by userland, concurrently with the
live target.
Only one metadata snapshot can be held at a time. The pool's status
line will give the block location for the current msnap.
Since version 0.1.5 of the userland thin provisioning tools, the
thin_dump program displays the msnap as follows:
thin_dump -m <msnap root> <metadata dev>
Available here: https://github.com/jthornber/thin-provisioning-tools
Now that userland can access the metadata we can do various things
that have traditionally been kernel side tasks:
i) Incremental backups.
By using metadata snapshots we can work out what blocks have
changed over time. Combined with data snapshots we can ensure
the data doesn't change while we back it up.
A short proof of concept script can be found here:
https://github.com/jthornber/thinp-test-suite/blob/master/incremental_backup_example.rb
ii) Migration of thin devices from one pool to another.
iii) Merging snapshots back into an external origin.
iv) Asyncronous replication.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Sat, 2 Jun 2012 23:30:00 +0000 (00:30 +0100)]
dm thin: use slab mempools
Use dedicated caches prefixed with a "dm_" name rather than relying on
kmalloc mempools backed by generic slab caches so the memory usage of
thin provisioning (and any leaks) can be accounted for independently.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Sat, 2 Jun 2012 23:29:58 +0000 (00:29 +0100)]
dm mpath: allow ioctls to trigger pg init
After the failure of a group of paths, any alternative paths that
need initialising do not become available until further I/O is sent to
the device. Until this has happened, ioctls return -EAGAIN.
With this patch, new paths are made available in response to an ioctl
too. The processing of the ioctl gets delayed until this has happened.
Instead of returning an error, we submit a work item to kmultipathd
(that will potentially activate the new path) and retry in ten
milliseconds.
Note that the patch doesn't retry an ioctl if the ioctl itself fails due
to a path failure. Such retries should be handled intelligently by the
code that generated the ioctl in the first place, noting that some SCSI
commands should not be retried because they are not idempotent (XOR write
commands). For commands that could be retried, there is a danger that
if the device rejected the SCSI command, the path could be errorneously
marked as failed, and the request would be retried on another path which
might fail too. It can be determined if the failure happens on the
device or on the SCSI controller, but there is no guarantee that all
SCSI drivers set these flags correctly.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Christie [Sat, 2 Jun 2012 23:29:45 +0000 (00:29 +0100)]
dm mpath: delay retry of bypassed pg
If I/O needs retrying and only bypassed priority groups are available,
set the pg_init_delay_retry flag to wait before retrying.
If, for example, the reason for the bypass is that the controller is
getting reset or there is a firmware upgrade happening, retrying right
away would cause a flood of log messages and retries for what could be a
few seconds or even several minutes.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Sat, 2 Jun 2012 23:29:43 +0000 (00:29 +0100)]
dm mpath: reduce size of struct multipath
Move multipath structure's 'lock' and 'queue_size' members to eliminate
two 4-byte holes. Also use a bit within a single unsigned int for each
existing flag (saves 8-bytes). This allows future flags to be added
without each consuming an unsigned int.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Linus Torvalds [Sat, 2 Jun 2012 23:22:51 +0000 (16:22 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking updates from David Miller:
1) Make syn floods consume significantly less resources by
a) Not pre-COW'ing routing metrics for SYN/ACKs
b) Mirroring the device queue mapping of the SYN for the SYN/ACK
reply.
Both from Eric Dumazet.
2) Fix calculation errors in Byte Queue Limiting, from Hiroaki SHIMODA.
3) Validate the length requested when building a paged SKB for a
socket, so we don't overrun the page vector accidently. From Jason
Wang.
4) When netlabel is disabled, we abort all IP option processing when we
see a CIPSO option. This isn't the right thing to do, we should
simply skip over it and continue processing the remaining options
(if any). Fix from Paul Moore.
5) SRIOV fixes for the mellanox driver from Jack orgenstein and Marcel
Apfelbaum.
6) 8139cp enables the receiver before the ring address is properly
programmed, which potentially lets the device crap over random
memory. Fix from Jason Wang.
7) e1000/e1000e fixes for i217 RST handling, and an improper buffer
address reference in jumbo RX frame processing from Bruce Allan and
Sebastian Andrzej Siewior, respectively.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
fec_mpc52xx: fix timestamp filtering
mcs7830: Implement link state detection
e1000e: fix Rapid Start Technology support for i217
e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()
r8169: call netif_napi_del at errpaths and at driver unload
tcp: reflect SYN queue_mapping into SYNACK packets
tcp: do not create inetpeer on SYNACK message
8139cp/8139too: terminate the eeprom access with the right opmode
8139cp: set ring address before enabling receiver
cipso: handle CIPSO options correctly when NetLabel is disabled
net: sock: validate data_len before allocating skb in sock_alloc_send_pskb()
bql: Avoid possible inconsistent calculation.
bql: Avoid unneeded limit decrement.
bql: Fix POSDIFF() to integer overflow aware.
net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAP
net/mlx4_core: Check port out-of-range before using in mlx4_slave_cap
net/mlx4_core: Fixes for VF / Guest startup flow
net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_event
net/mlx4_core: Fix number of EQs used in ICM initialisation
net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_int
Linus Torvalds [Sat, 2 Jun 2012 23:17:03 +0000 (16:17 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull straggler x86 fixes from Peter Anvin:
"Three groups of patches:
- EFI boot stub documentation and the ability to print error messages;
- Removal for PTRACE_ARCH_PRCTL for x32 (obsolete interface which
should never have been ported, and the port is broken and
potentially dangerous.)
- ftrace stack corruption fixes. I'm not super-happy about the
technical implementation, but it is probably the least invasive in
the short term. In the future I would like a single method for
nesting the debug stack, however."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32
x86, efi: Add EFI boot stub documentation
x86, efi; Add EFI boot stub console support
x86, efi: Only close open files in error path
ftrace/x86: Do not change stacks in DEBUG when calling lockdep
x86: Allow nesting of the debug stack IDT setting
x86: Reset the debug_stack update counter
ftrace: Use breakpoint method to update ftrace caller
ftrace: Synchronize variable setting with breakpoints
Linus Torvalds [Sat, 2 Jun 2012 22:21:43 +0000 (15:21 -0700)]
tty: Revert the tty locking series, it needs more work
This reverts the tty layer change to use per-tty locking, because it's
not correct yet, and fixing it will require some more deep surgery.
The main revert is
d29f3ef39be4 ("tty_lock: Localise the lock"), but
there are several smaller commits that built upon it, they also get
reverted here. The list of reverted commits is:
fde86d310886 - tty: add lockdep annotations
8f6576ad476b - tty: fix ldisc lock inversion trace
d3ca8b64b97e - pty: Fix lock inversion
b1d679afd766 - tty: drop the pty lock during hangup
abcefe5fc357 - tty/amiserial: Add missing argument for tty_unlock()
fd11b42e3598 - cris: fix missing tty arg in wait_event_interruptible_tty call
d29f3ef39be4 - tty_lock: Localise the lock
The revert had a trivial conflict in the 68360serial.c staging driver
that got removed in the meantime.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephan Gatzka [Sat, 2 Jun 2012 03:04:06 +0000 (03:04 +0000)]
fec_mpc52xx: fix timestamp filtering
skb_defer_rx_timestamp was called with a freshly allocated skb but must
be called with rskb instead.
Signed-off-by: Stephan Gatzka <stephan@gatzka.org>
Cc: stable <stable@vger.kernel.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ondrej Zary [Fri, 1 Jun 2012 10:29:08 +0000 (10:29 +0000)]
mcs7830: Implement link state detection
Add .status callback that detects link state changes.
Tested with MCS7832CV-AA chip (9710:7830, identified as rev.C by the driver).
Fixes https://bugzilla.kernel.org/show_bug.cgi?id=28532
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 2 Jun 2012 16:03:54 +0000 (09:03 -0700)]
Merge 'for-linus' branches from git://git./linux/kernel/git/viro/{vfs,signal}
Pull vfs fix and a fix from the signal changes for frv from Al Viro.
The __kernel_nlink_t for powerpc got scrogged because 64-bit powerpc
actually depended on the default "unsigned long", while 32-bit powerpc
had an explicit override to "unsigned short". Al didn't notice, and
made both of them be the unsigned short.
The frv signal fix is fallout from simplifying the do_notify_resume()
code, and leaving an extra parenthesis.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
powerpc: Fix size of st_nlink on 64bit
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
frv: Remove bogus closing parenthesis
Anton Blanchard [Sat, 2 Jun 2012 11:34:52 +0000 (21:34 +1000)]
powerpc: Fix size of st_nlink on 64bit
commit
e57f93cc53b7 (powerpc: get rid of nlink_t uses, switch to
explicitly-sized type) changed the size of st_nlink on ppc64 from
a long to a short, resulting in boot failures.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Geert Uytterhoeven [Sat, 2 Jun 2012 11:08:39 +0000 (13:08 +0200)]
frv: Remove bogus closing parenthesis
Introduced by commit
6fd84c0831ec78d98736b76dc5e9b849f1dbfc9e
("TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>