Steve Wise [Fri, 13 Aug 2010 20:56:34 +0000 (20:56 +0000)]
RDMA/ucma: Allow tuning the max listen backlog
For iWARP connections, the connect request is carried in a TCP payload
on an already established TCP connection. So if the ucma's backlog is
full, the connection request is transmitted and acked at the TCP level
by the time the connect request gets dropped in the ucma. The end
result is the connection gets rejected by the iWARP provider.
Further, a 32 node 256NP OpenMPI job will generate > 128 connect
requests on some ranks.
This patch increases the default max backlog to 1024, and adds a
sysctl variable so the backlog can be adjusted at run time.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Dan Rosenberg [Mon, 27 Sep 2010 16:30:28 +0000 (12:30 -0400)]
Fix pktcdvd ioctl dev_minor range check
The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a
pktcdvd_device from the global pkt_devs array. The index into this
array is provided directly by the user and is a signed integer, so the
comparison to ensure that it falls within the bounds of this array will
fail when provided with a negative index.
This can be used to read arbitrary kernel memory or cause a crash due to
an invalid pointer dereference. This can be exploited by users with
permission to open /dev/pktcdvd/control (on many distributions, this is
readable by group "cdrom").
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
[ Rather than add a cast, just make the function take the right type -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Mon, 27 Sep 2010 12:12:33 +0000 (13:12 +0100)]
MN10300: Default config choice GDBSTUB_TTYSM0 should be GDBSTUB_ON_TTYSM0
The configuration choice for the port on which the GDB stub listens has
a default of GDBSTUB_TTYSM0, but this should be GDBSTUB_ON_TTYSM0 to
match the option.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 27 Sep 2010 19:33:54 +0000 (12:33 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
RDMA/cxgb3: Turn off RX coalescing for iWARP connections
Linus Torvalds [Mon, 27 Sep 2010 19:32:36 +0000 (12:32 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits)
ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE
ARM: 6408/1: omap: Map only available sram memory
ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries
ARM: pxa: remove pr_<level> uses of KERN_<level>
ARM: pxa168fb: clear enable bit when not active
ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured
ARM: pxa168: fix corrected reset vector
ARM: pxa: Use PIO for PI2C communication on Palm27x
ARM: pxa: Fix Vpac270 gpio_power for MMC
ARM: 6401/1: plug a race in the alignment trap handler
ARM: 6406/1: at91sam9g45: fix i2c bus speed
leds: leds-ns2: fix locking
ARM: dove: fix __io() definition to use bus based offset
dmaengine: fix interrupt clearing for mv_xor
ARM: kirkwood: Unbreak PCIe I/O port
ARM: Fix build error when using KCONFIG_CONFIG
ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing
ARM: 6400/1: at91: fix arch_gettimeoffset fallout
ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM
...
Linus Torvalds [Mon, 27 Sep 2010 19:32:00 +0000 (12:32 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
net/9p: fix memory handling/allocation in rdma_request()
Linus Torvalds [Mon, 27 Sep 2010 19:31:12 +0000 (12:31 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/bp/bp
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
amd64_edac: Fix driver module removal
Linus Torvalds [Mon, 27 Sep 2010 19:29:39 +0000 (12:29 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
TOMOYO: Don't abuse sys_getpid(), sys_getppid()
Linus Torvalds [Mon, 27 Sep 2010 19:28:19 +0000 (12:28 -0700)]
Merge branch 'drm-intel-fixes' of git://git./linux/kernel/git/ickle/drm-intel
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
drm/i915/sdvo: Handle unsupported GET_SUPPORTED_ENHANCEMENTS gracefully
drm/i915/sdvo: Cleanup connector on error path
drm/i915: Fix 945GM regression in
e259befd
Linus Torvalds [Mon, 27 Sep 2010 19:27:00 +0000 (12:27 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
mmc: sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove
mmc: sdhci-s3c: fix incorrect spinlock usage after merge
mmc: MAINTAINERS: add myself as MMC maintainer
Linus Torvalds [Mon, 27 Sep 2010 19:26:33 +0000 (12:26 -0700)]
Merge branch 'urgent' of git://git./linux/kernel/git/brodo/pcmcia-2.6
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
pcmcia: pd6729: Fix error path
pcmcia: preserve configuration information if request_io fails partly
Linus Torvalds [Mon, 27 Sep 2010 19:25:10 +0000 (12:25 -0700)]
Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
intel-iommu: Use symbolic values instead of magic numbers in Lenovo w/a
intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT space
Linus Torvalds [Mon, 27 Sep 2010 19:22:21 +0000 (12:22 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/amd-iommu: Fix rounding-bug in __unmap_single
x86/amd-iommu: Work around S3 BIOS bug
x86/amd-iommu: Set iommu configuration flags in enable-loop
x86, setup: Fix earlyprintk=serial,0x3f8,115200
x86, setup: Fix earlyprintk=serial,ttyS0,115200
Linus Torvalds [Mon, 27 Sep 2010 19:21:48 +0000 (12:21 -0700)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf, x86: Catch spurious interrupts after disabling counters
tracing/x86: Don't use mcount in kvmclock.c
tracing/x86: Don't use mcount in pvclock.c
Al Viro [Sun, 26 Sep 2010 18:29:12 +0000 (19:29 +0100)]
mn10300: check __get_user/__put_user results...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 26 Sep 2010 18:29:02 +0000 (19:29 +0100)]
mn10300: get rid of set_fs(USER_DS) in sigframe setup
It really has no business being there; short of a serious kernel bug
we should already have USER_DS at that point. It shouldn't have been
done on x86 either...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 26 Sep 2010 18:28:52 +0000 (19:28 +0100)]
mn10300: ->restart_block.fn needs to be reset on sigreturn
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 26 Sep 2010 18:28:42 +0000 (19:28 +0100)]
mn10300: prevent double syscall restarts
set ->orig_d0 to -1, same as what sigreturn does
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 26 Sep 2010 18:28:32 +0000 (19:28 +0100)]
mn10300: avoid SIGSEGV delivery loop
force_sigsegv() is there for purpose...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 26 Sep 2010 18:28:22 +0000 (19:28 +0100)]
alpha: __get_user/__put_user results need to be checked...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 26 Sep 2010 18:28:12 +0000 (19:28 +0100)]
alpha: switch osf_sigprocmask() to use of sigprocmask()
get rid of a useless wrapper, while we are at it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steve Wise [Sun, 19 Sep 2010 00:38:21 +0000 (19:38 -0500)]
RDMA/cxgb3: Turn off RX coalescing for iWARP connections
The HW by default has RX coalescing on. For iWARP connections, this
causes a 100ms delay in connection establishement due to the ingress
MPA Start message being stalled in HW. So explicitly turn RX
coalescing off when setting up iWARP connections.
This was causing very bad performance for NP64 gather operations using
Open MPI, due to the way it sets up connections on larger jobs.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Will Deacon [Mon, 27 Sep 2010 13:55:15 +0000 (14:55 +0100)]
ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
The PL310 on the ct-ca9x4 tile for the Versatile Express does not need
to add additional latency when accessing its cache RAMs. Unfortunately,
the boot monitor sets this up for an 8-cycle delay on reads and writes,
resulting in greatly reduced memory performance when the L2 cache is
enabled.
This patch sets the L2 RAM latencies to the correct value of 1 cycle
on the ct-ca9x4 tile before enabling the L2 cache.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Davidlohr Bueso [Mon, 13 Sep 2010 15:53:18 +0000 (15:53 +0000)]
net/9p: fix memory handling/allocation in rdma_request()
Return -ENOMEM when erroring on kmalloc and fix memory leaks when returning on error.
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Borislav Petkov [Sun, 26 Sep 2010 10:42:23 +0000 (12:42 +0200)]
amd64_edac: Fix driver module removal
f4347553b30ec66530bfe63c84530afea3803396 removed the edac polling
mechanism in favor of using a notifier chain for conveying MCE
information to edac. However, the module removal path didn't test
whether the driver had setup the polling function workqueue at all and
the rmmod process was hanging in the kernel at try_to_del_timer_sync()
in the cancel_delayed_work() path, trying to cancel an uninitialized
work struct.
Fix that by adding a balancing check to the workqueue removal path.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Ben Hutchings [Sun, 26 Sep 2010 04:55:13 +0000 (05:55 +0100)]
TOMOYO: Don't abuse sys_getpid(), sys_getppid()
System call entry functions sys_*() are never to be called from
general kernel code. The fact that they aren't declared in header
files should have been a clue. These functions also don't exist on
Alpha since it has sys_getxpid() instead.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
Marek Szyprowski [Thu, 23 Sep 2010 14:22:05 +0000 (16:22 +0200)]
mmc: sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove
If not all clocks have been defined in platform data, the driver will
cause a null pointer dereference when it is removed. This patch fixes
this issue.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Marek Szyprowski [Mon, 20 Sep 2010 13:03:42 +0000 (15:03 +0200)]
mmc: sdhci-s3c: fix incorrect spinlock usage after merge
In the commit
f522886e202a34a2191dd5d471b3c4d46410a9a0 a merge conflict
in the sdhci-s3c driver been fixed. However the fix used incorrect
spinlock operation - it caused a race with sdhci interrupt service. The
correct way to solve it is to use spin_lock_irqsave/irqrestore() calls.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Chris Ball [Fri, 10 Sep 2010 16:05:24 +0000 (12:05 -0400)]
mmc: MAINTAINERS: add myself as MMC maintainer
Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: Pierre Ossman <pierre-list@ossman.eu>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rahul Ruikar [Sun, 26 Sep 2010 11:30:29 +0000 (17:00 +0530)]
pcmcia: pd6729: Fix error path
In error return path
call pci_disable_device() which was enabled earlier.
Signed-off-by: Rahul Ruikar <rahul.ruikar@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Al Viro [Sat, 25 Sep 2010 20:07:51 +0000 (21:07 +0100)]
alpha: fix usp value in multithreaded coredumps
rdusp() gives us the right value only for the current thread...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sat, 25 Sep 2010 20:07:14 +0000 (21:07 +0100)]
alpha: fix hae_cache race in RESTORE_ALL
We want interrupts disabled on all paths leading to RESTORE_ALL;
otherwise, we are risking an IRQ coming between the updates of
alpha_mv->hae_cache and *alpha_mv->hae_register and set_hae()
within the IRQ getting badly confused.
RESTORE_ALL used to play with disabling IRQ itself, but that got
removed back in 2002, without making sure we had them disabled
on all paths. It's cheaper to make sure we have them disabled than
to revert to original variant...
Remove the detritus left from that commit back in 2002; we used to
need a reload of $0 and $1 since swpipl would change those, but
doing that had become pointless when we stopped doing swpipl in
there...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 25 Sep 2010 16:51:54 +0000 (09:51 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: prevent merges of discard and write requests
Linus Torvalds [Sat, 25 Sep 2010 16:51:31 +0000 (09:51 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: sound/pci/rme9652: prevent reading uninitialized stack memory
ALSA: hda - Fix auto-parse of SPDIF input of Realtek codecs
ASoC: Fix multi-componentism
ASoC: Fix soc-cache buffer overflow bug
ALSA: oxygen: fix analog capture on Claro halo cards
ALSA: hda - Add Dell Latitude E6400 model quirk
ASoC: fix clkdev API usage in sh/migor.c
Larry Woodman [Fri, 24 Sep 2010 16:04:48 +0000 (12:04 -0400)]
Avoid pgoff overflow in remap_file_pages
Thomas Pollet noticed that the remap_file_pages() system call in
fremap.c has a potential overflow in the first part of the if statement
below, which could cause it to process bogus input parameters.
Specifically the pgoff + size parameters could be wrap thereby
preventing the system call from failing when it should.
Reported-by: Thomas Pollet <thomas.pollet@gmail.com>
Signed-off-by: Larry Woodman <lwoodman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Iwai [Sat, 25 Sep 2010 15:57:53 +0000 (17:57 +0200)]
Merge branch 'fix/hda' into for-linus
Takashi Iwai [Sat, 25 Sep 2010 15:57:49 +0000 (17:57 +0200)]
Merge branch 'fix/asoc' into for-linus
Dan Rosenberg [Sat, 25 Sep 2010 15:07:27 +0000 (11:07 -0400)]
ALSA: sound/pci/rme9652: prevent reading uninitialized stack memory
The SNDRV_HDSP_IOCTL_GET_CONFIG_INFO and
SNDRV_HDSP_IOCTL_GET_CONFIG_INFO ioctls in hdspm.c and hdsp.c allow
unprivileged users to read uninitialized kernel stack memory, because
several fields of the hdsp{m}_config_info structs declared on the stack
are not altered or zeroed before being copied back to the user. This
patch takes care of it.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Santosh Shilimkar [Fri, 24 Sep 2010 06:21:05 +0000 (07:21 +0100)]
ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE
On Davinci SRAM is mapped as MT_DEVICE becasue of the section
mapping pre-requisite instead of intended MT_MEMORY_NONCACHED
Since the section mapping limitation gets fixed with first
patch in this series, the MT_MEMORY_NONCACHED can be used now.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Santosh Shilimkar [Fri, 24 Sep 2010 06:19:49 +0000 (07:19 +0100)]
ARM: 6408/1: omap: Map only available sram memory
Currently we map 1 MB section while setting up SRAM on OMAPs
Regardless of the actual memory. The physical OCM RAM available
on OMAP SOCs is in order of KBs. This patch maps only available
sram and cleans up some un-necessary cpu_is_xxx checks.
Mapping un-available or non-accessible(secure) memory on the newer ARM
processor is dangerous. Because ARM CPUs can now speculatively prefetch,
we should avoid mapping any no-existing or secure memory.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Santosh Shilimkar [Fri, 24 Sep 2010 06:18:22 +0000 (07:18 +0100)]
ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries
This patch populates the L1 entries for MT_MEMORY and MT_MEMORY_NONCACHED
types so that at boot-up, we can map memories outside system memory
at page level granularity
Previously the mapping was limiting to section level, which creates
unnecessary additional mapping for which physical memory may not
present. On the newer ARM with speculation, this is dangerous and can
result in untraceable aborts.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Adrian Hunter [Sat, 25 Sep 2010 10:42:55 +0000 (12:42 +0200)]
block: prevent merges of discard and write requests
Add logic to prevent two I/O requests being merged if
only one of them is a discard. Ditto secure discard.
Without this fix, it is possible for write requests
to transform into discard requests. For example:
Submit bio 1 to discard 8 sectors from sector n
Submit bio 2 to write 8 sectors from sector n + 16
Submit bio 3 to write 8 sectors from sector n + 8
Bio 1 becomes request 1. Bio 2 becomes request 2.
Bio 3 is merged with request 2, and then subsequently
request 2 is merged with request 1 resulting in just
one I/O request which discards all 24 sectors.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
(Moved the checks above the position checks /Jens)
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Russell King [Sat, 25 Sep 2010 09:27:50 +0000 (10:27 +0100)]
Merge branch 'fix' of git://git./linux/kernel/git/ycmiao/pxa-linux-2.6
Linus Torvalds [Sat, 25 Sep 2010 02:09:20 +0000 (19:09 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
x86/hwmon: pkgtemp has no dependency on PCI
MAINTAINERS: Update hwmon entry
x86/hwmon: register alternate sibling upon CPU removal
x86/hwmon: fix initialization of pkgtemp
x86/hwmon: fix initialization of coretemp
x86/hwmon: don't leak device attribute file from pkgtemp_probe() and pkgtemp_remove()
x86/hwmon: avoid deadlock on CPU removal in pkgtemp
x86/hwmon: fix module init for hotplug-but-no-device-found case
hwmon: (lis3) Fix Oops with NULL platform data
Linus Torvalds [Sat, 25 Sep 2010 02:08:39 +0000 (19:08 -0700)]
Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
arch/tile: remove dead code from intvec_32.S
Joe Perches [Sun, 12 Sep 2010 05:10:49 +0000 (22:10 -0700)]
ARM: pxa: remove pr_<level> uses of KERN_<level>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Haojian Zhuang [Wed, 8 Sep 2010 13:42:39 +0000 (09:42 -0400)]
ARM: pxa168fb: clear enable bit when not active
While fb isn't active, we should clear CFG_GRA_ENA bit. The existing code
can't clear this bit.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Eric Miao [Tue, 7 Sep 2010 07:10:14 +0000 (15:10 +0800)]
ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured
When CONFIG_PXA3xx is not selected, cpu_is_pxa3xx() doesn't expand to
zero, which in some places doesn't result in correct optimization.
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Reported-and-tested-by: Marek Vasut <marek.vasut@gmail.com>
Mark F. Brown [Thu, 26 Aug 2010 09:07:29 +0000 (05:07 -0400)]
ARM: pxa168: fix corrected reset vector
Reset vector for pxa168 is 0xffff_0000 not 0x0. This fix allows
reboot to work
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Marek Vasut [Sat, 14 Aug 2010 04:08:30 +0000 (06:08 +0200)]
ARM: pxa: Use PIO for PI2C communication on Palm27x
Original idea by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Marek Vasut [Mon, 9 Aug 2010 01:55:09 +0000 (03:55 +0200)]
ARM: pxa: Fix Vpac270 gpio_power for MMC
GPIO 0 is valid, yet this platform doesn't have any power GPIO for MMC.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Chris Metcalf [Fri, 24 Sep 2010 21:19:20 +0000 (17:19 -0400)]
arch/tile: remove dead code from intvec_32.S
This "bpt_code" instruction was killed off in our development line a while
ago (the actual definition of bpt_code that is used is in kernel/traps.c)
but I didn't push it for 2.6.36 because it seemed harmless and I didn't
want to try to push more than absolutely necessary.
However, we recently fixed a bug in our gcc that had been causing
"-gdwarf2" not to be passed to the assembler, and passing this flag causes
an erroneous assembler failure in the presence of code in a data section,
sometimes. While we'd like to track down the bug in the assembler,
we'd also like to make sure 2.6.36 builds with the current toolchain,
so I'm removing this dead code as well.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Linus Torvalds [Fri, 24 Sep 2010 21:13:57 +0000 (14:13 -0700)]
fremap: get rid of broken 'end' variable
Thomas Pollet points out that the 'end' variable is broken. It was
computed based on start/size before they were page-aligned, and as such
doesn't actually match any of the other actions we take. The overflow
test on end was also redundant, since we had already tested it with the
properly aligned version.
So just get rid of it entirely. The one remaining use for that broken
variable can just use 'start+size' like all the other cases already did.
Reported-by: Thomas Pollet <thomas.pollet@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 24 Sep 2010 21:08:15 +0000 (14:08 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
o2dlm: force free mles during dlm exit
ocfs2: Sync inode flags with ext2.
ocfs2: Move 'wanted' into parens of ocfs2_resmap_resv_bits.
ocfs2: Use cpu_to_le16 for e_leaf_clusters in ocfs2_bg_discontig_add_extent.
ocfs2: update ctime when changing the file's permission by setfacl
ocfs2/net: fix uninitialized ret in o2net_send_message_vec()
Ocfs2: Handle empty list in lockres_seq_start() for dlmdebug.c
Ocfs2: Re-access the journal after ocfs2_insert_extent() in dxdir codes.
ocfs2: Fix lockdep warning in reflink.
ocfs2/lockdep: Move ip_xattr_sem out of ocfs2_xattr_get_nolock.
Linus Torvalds [Fri, 24 Sep 2010 20:55:29 +0000 (13:55 -0700)]
Merge git://git./linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: update Kconfig help text for CONFIG_USB_SUSPEND
usb: musb: gadget: restart request on clearing endpoint halt
usb: musb: host: Issue a memory barrier before starting DMA
usb: musb: gadget: fix dma length in txstate
usb: musb: gadget: complete request only if data is transfered over
usb: musb: gadget: fix DMA length for OUT transfer
usb: musb: gadget: enable autoclear for OUT transfer in both DMA 0 and DMA 1
usb: musb: gadget: fix bulk IN infinit hangs in double buffer case
usb: musb: gadget: fix kernel panic if using out ep with FIFO_TXRX style
USB: fix bug in initialization of interface minor numbers
Linus Torvalds [Fri, 24 Sep 2010 20:55:12 +0000 (13:55 -0700)]
Merge git://git./linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
Staging: ti-st: remove st_get_plat_device
Linus Torvalds [Fri, 24 Sep 2010 20:55:01 +0000 (13:55 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
vgaarb: trivial fix
drm: radeon cleanup fixes...
drm: fix trivial coding errors
drm: ttm sparse fixes.
drm/nouveau: fix panels using straps-based mode detection
drm/ttm: Clear the ghost cpu_writers flag on ttm_buffer_object_transfer.
drm/radeon: don't allow device to be opened if powered down
Al Viro [Fri, 24 Sep 2010 05:25:34 +0000 (06:25 +0100)]
m32r: fix breakage from "m32r: use generic ptrace_resume code"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 24 Sep 2010 05:24:53 +0000 (06:24 +0100)]
m32r: hole in shifting pc back
It's a userland pointer; worse, an untrustable one since ptrace
has just provided a chance to modify it.
X-Roothole-Covering-Cabal: TINRCC
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 24 Sep 2010 05:23:57 +0000 (06:23 +0100)]
m32r: don't block signals if sigframe setup has failed
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 24 Sep 2010 05:22:30 +0000 (06:22 +0100)]
make m32r handle multiple pending signals
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 24 Sep 2010 05:20:35 +0000 (06:20 +0100)]
m32r: fix rt_sigsuspend()
do_signal() should know about saved_mask for it to work...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Beulich [Mon, 13 Sep 2010 10:24:47 +0000 (10:24 +0000)]
x86/hwmon: pkgtemp has no dependency on PCI
Other than coretemp, from which this code was apparently derived, there
is no PCI specific code in this driver.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Guenter Roeck [Fri, 24 Sep 2010 15:43:44 +0000 (08:43 -0700)]
MAINTAINERS: Update hwmon entry
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jan Beulich [Mon, 13 Sep 2010 10:23:05 +0000 (10:23 +0000)]
x86/hwmon: register alternate sibling upon CPU removal
Just like pkgtemp registers another core of the same package when one
gets removed, coretemp should register another hyperthread (if
available) in that situation.
As pointed out in the patch fixing the respective code in pkgtemp, the
list protectng mutex must be dropped before calling
coretemp_device_add(), and due to the restructured loop (including an
explicit return) the "safe" variant of the list iterator isn't needed
anymore.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jan Beulich [Mon, 13 Sep 2010 10:18:54 +0000 (10:18 +0000)]
x86/hwmon: fix initialization of pkgtemp
Feature availability should also be checked in the hotplug code path.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jan Beulich [Fri, 24 Sep 2010 05:21:34 +0000 (22:21 -0700)]
x86/hwmon: fix initialization of coretemp
Using cpuid_eax() to determine feature availability on other than
the current CPU is invalid. And feature availability should also be
checked in the hotplug code path.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jan Beulich [Mon, 13 Sep 2010 10:14:43 +0000 (10:14 +0000)]
x86/hwmon: don't leak device attribute file from pkgtemp_probe() and pkgtemp_remove()
While apparently inherited from coretemp source, this particular error handling
cleanup and exit path wasn't copied properly (or perhaps got discarded
intermediately and not re-added properly later).
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
(added device file removal in pkgtemp_remove)
Jan Beulich [Mon, 13 Sep 2010 10:11:05 +0000 (10:11 +0000)]
x86/hwmon: avoid deadlock on CPU removal in pkgtemp
pkgtemp_device_remove(), holding the list protecting mutex, calls
pkgtemp_device_add(), which itself wants to acquire the same mutex.
Holding the mutex over the entire loop body in pkgtemp_device_remove()
isn't really necessary, as long as the loop gets exited after
processing the matched CPU.
Once exiting the loop after removing an eventual match, there's no
need for using the "safe" list iterator anymore.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jan Beulich [Mon, 13 Sep 2010 10:05:51 +0000 (10:05 +0000)]
x86/hwmon: fix module init for hotplug-but-no-device-found case
In commit
0dca94baeab4a1a514841b0a4c8e3a51dfb4d5ae the call to
platform_driver_unregister() was made conditional upon !HOTPLUG_CPU,
but the return value from coretemp_init() was left to indicate an
error. This isn't correct, as the negative return value indicates to
the module loader that initialization failed, which isn't intended
here and results in dangling pointers.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Takashi Iwai [Thu, 23 Sep 2010 17:01:11 +0000 (10:01 -0700)]
hwmon: (lis3) Fix Oops with NULL platform data
The recent addition of threaded irq handler causes a NULL dereference
when used with hp_accel driver, which has NULL pdata.
Acked-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Alan Stern [Fri, 24 Sep 2010 15:41:46 +0000 (11:41 -0400)]
USB: update Kconfig help text for CONFIG_USB_SUSPEND
This patch (as1429) updates the Kconfig help text for
CONFIG_USB_SUSPEND. The power/level file is now deprecated; we should
tell people to use power/control instead.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sergei Shtylyov [Sat, 11 Sep 2010 18:23:12 +0000 (13:23 -0500)]
usb: musb: gadget: restart request on clearing endpoint halt
Commit
46034dca515bc4ddca0399ae58106d1f5f0d809f (USB: musb_gadget_ep0: stop
abusing musb_gadget_set_halt()) forgot to restart a queued request after
clearing the endpoint halt feature. This results in a couple of USB resets
while enumerating the file-backed storage gadget due to CSW packet not being
sent for the MODE SENSE(10) command.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stable@kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Santosh Shilimkar [Mon, 20 Sep 2010 07:32:07 +0000 (10:32 +0300)]
usb: musb: host: Issue a memory barrier before starting DMA
This patch fixes the issue which was observed while transfering
a large file ( > 20MB) over USB (OMAP MUSB controller acts as USB host)
to an attached USB thumb drive.
It was found that CDB field of CBW packet was set to 0x0. This was
due to missing a barrier before DMA engine starts transfer.
This buffer is allocated using dma_alloc_coherent which gives
non-cacheble but bufferable memory and hence needed a write
memory barrier to flush the write buffer.
More info on this thread is here:
http://www.spinics.net/lists/linux-omap/msg33987.html
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Maulik Mankad <x0082077@ti.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ming Lei [Mon, 20 Sep 2010 07:32:06 +0000 (10:32 +0300)]
usb: musb: gadget: fix dma length in txstate
DMA length should not go beyond the availabe space
of request buffer, so fix it.
Also set max_len of cppi dma channel as max size of
int type, so make musb dma handling happier.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ming Lei [Mon, 20 Sep 2010 07:32:05 +0000 (10:32 +0300)]
usb: musb: gadget: complete request only if data is transfered over
Complete the current request only if the data transfer is over.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ming Lei [Mon, 20 Sep 2010 07:32:04 +0000 (10:32 +0300)]
usb: musb: gadget: fix DMA length for OUT transfer
DMA length should not go beyond the availabe space of request buffer,
so fix it.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ming Lei [Mon, 20 Sep 2010 07:32:03 +0000 (10:32 +0300)]
usb: musb: gadget: enable autoclear for OUT transfer in both DMA 0 and DMA 1
This patch fixes one bugs of OUT transfer in double buffer case:
-the current code only enable autoclear for dma mode 1, and not
for dma mode 0
Without this patch, test #5 of usbtest can't be passed if we
configure musb as g_zero and use fifo mode 3 to enable double
buffer mode.
With this patch and the following patch(fix dma length),
on my beagle B5, test#5(queued bulk out) may go beyond
18Mbyte/s(seems dma mode 0 is quicker in double buffer case)
if musb is configured as g_zero and fifo mode 3 is taken, follows
the test command:
#./testusb -D DEV_NAME -c 1024 -t 5 -s 32768 -g 8 [1]
Also I have tested this patch can't make g_ether broken.
[1],source of testusb : tools/usb/testusb.c under linux kernel;
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ming Lei [Mon, 20 Sep 2010 07:32:02 +0000 (10:32 +0300)]
usb: musb: gadget: fix bulk IN infinit hangs in double buffer case
This patch fixes one infinite hang of bulk IN transfer in double buffer
case, the hang can be observed easily by test #6 of usbtest if musb is
configured as g_zero and fifo mode 3 is taken to enable double fifo.
In fact, the patch only removes the check for non-empty fifo before
loading data from new request into fifo since the check is not correct:
-in double buffer case, fifo may accommodate more than one packet,
even though it has contained one packet already and is non-empty
-since last DMA is completed before calling musb_g_tx, it is sure
that fifo may accommodate at least one packet
Without applying the patch, new requst enqueued from .complte may not
have a chance to be loaded into fifo, then will never be completed and
cause infinite hangs.
With the patch, on my beagle B5, test#6(queued bulk in) can be passed and
test result may go beyond 33Mbyte/s if musb is configured as g_zero and
fifo mode 3 is taken, follows the test command:
#testusb -D DEV_NAME -c 1024 -t 6 -s 32768 -g 8 [1]
[1],
-source of testusb : tools/usb/testusb.c under linux kernel;
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ming Lei [Mon, 20 Sep 2010 07:32:01 +0000 (10:32 +0300)]
usb: musb: gadget: fix kernel panic if using out ep with FIFO_TXRX style
For shared fifo hw endpoint(with FIFO_TXRX style), only ep_in
field of musb_hw_ep is intialized in musb_g_init_endpoints, and
ep_out is not initialized, but musb_g_rx and rxstate may access
ep_out field of musb_hw_ep by the method below:
musb_ep = &musb->endpoints[epnum].ep_out
which can cause the kernel panic[1] below, this patch fixes the issue
by getting 'musb_ep' from '&musb->endpoints[epnum].ep_in' for shared fifo
endpoint.
[1], kernel panic
[root@OMAP3EVM /]# musb_interrupt 1583: ** IRQ peripheral usb0008 tx0000 rx4000
musb_stage0_irq 460: <== Power=f0, DevCtl=99, int_usb=0x8
musb_g_rx 772: <== (null), rxcsr 4007
ffffffe8
musb_g_rx 786: iso overrun on
ffffffe8
Unable to handle kernel NULL pointer dereference at virtual address
00000008
pgd =
c0004000
[
00000008] *pgd=
00000000
Internal error: Oops: 17 [#1] PREEMPT
last sysfs file: /sys/devices/platform/musb_hdrc/usb1/usb_device/usbdev1.1/dev
Modules linked in: g_zero
CPU: 0 Tainted: G W (2.6.35-rc6-gkh-wl+ #92)
PC is at musb_g_rx+0xfc/0x2ec
LR is at vprintk+0x3f4/0x458
pc : [<
c02c07a4>] lr : [<
c006ccb0>] psr:
20000193
sp :
c760bd78 ip :
c03c9d70 fp :
c760bdbc
r10:
00000000 r9 :
fa0ab1e0 r8 :
0000000e
r7 :
c7e80158 r6 :
ffffffe8 r5 :
00000001 r4 :
00004003
r3 :
00010003 r2 :
c760bcd8 r1 :
c03cd030 r0 :
0000002e
Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control:
10c5387d Table:
8778c019 DAC:
00000017
Process kmemleak (pid: 421, stack limit = 0xc760a2e8)
Stack: (0xc760bd78 to 0xc760c000)
bd60:
ffffffe8 c04b1b58
bd80:
ffffffe8 c7c01ac0 00000000 c7e80d24 c0084238 00000001 00000001 c7e80158
bda0:
0000000e 00000008 00000099 000000f0 c760be04 c760bdc0 c02bcd68 c02c06b4
bdc0:
00000099 00000008 00004000 c760bdd8 c03cc4f8 00000000 00000002 c7e80158
bde0:
c7d2e300 60000193 c760a000 0000005c 00000000 00000000 c760be24 c760be08
be00:
c02bcecc c02bc1ac c7d2e300 c7d2e300 0000005c c760a000 c760be54 c760be28
be20:
c00ad698 c02bce6c 00000000 c7d2e300 c067c258 0000005c c067c294 00000001
be40:
c760a000 00000000 c760be74 c760be58 c00af984 c00ad5fc 0000005c 00000000
be60:
00000000 00000002 c760be8c c760be78 c0039080 c00af8d0 ffffffff fa200000
be80:
c760beec c760be90 c0039b6c c003900c 00000001 00000000 c7d1e240 00000000
bea0:
00000000 c068bae8 00000000 60000013 00000001 00000000 00000000 c760beec
bec0:
c0064ecc c760bed8 c00ff7d0 c003a0a8 60000013 ffffffff 00000000 c068bae8
bee0:
c760bf24 c760bef0 c00ff7d0 c0064ec4 00000001 00000000 c00ff700 00000000
bf00:
c0087f00 00000000 60000013 c0d76a70 c0e23795 00000001 c760bf4c c760bf28
bf20:
c00ffdd8 c00ff70c c068bb08 c068bae8 60000013 c0100938 c068bb30 00000000
bf40:
c760bf84 c760bf50 c010014c c00ffd84 00000001 00000000 c010000c 00012c00
bf60:
c7c33f04 00012c00 c7c33f04 00000000 c0100938 00000000 c760bf9c c760bf88
bf80:
c01009a8 c0100018 c760bfa8 c7c33f04 c760bff4 c760bfa0 c0088000 c0100944
bfa0:
c760bf98 00000000 00000000 00000001 dead4ead ffffffff ffffffff c08ba2bc
bfc0:
00000000 c049e7fa 00000000 c0087f70 c760bfd0 c760bfd0 c7c33f04 c0087f70
bfe0:
c006f5e8 00000013 00000000 c760bff8 c006f5e8 c0087f7c 7f0004ff df2000ff
Backtrace:
[<
c02c06a8>] (musb_g_rx+0x0/0x2ec) from [<
c02bcd68>] (musb_interrupt+0xbc8/0xcc0)
[<
c02bc1a0>] (musb_interrupt+0x0/0xcc0) from [<
c02bcecc>] (generic_interrupt+0x6c/0x84)
[<
c02bce60>] (generic_interrupt+0x0/0x84) from [<
c00ad698>] (handle_IRQ_event+0xa8/0x1ec)
r7:
c760a000 r6:
0000005c r5:
c7d2e300 r4:
c7d2e300
[<
c00ad5f0>] (handle_IRQ_event+0x0/0x1ec) from [<
c00af984>] (handle_level_irq+0xc0/0x13c)
[<
c00af8c4>] (handle_level_irq+0x0/0x13c) from [<
c0039080>] (asm_do_IRQ+0x80/0xa0)
r7:
00000002 r6:
00000000 r5:
00000000 r4:
0000005c
[<
c0039000>] (asm_do_IRQ+0x0/0xa0) from [<
c0039b6c>] (__irq_svc+0x4c/0xb4)
Exception stack(0xc760be90 to 0xc760bed8)
be80:
00000001 00000000 c7d1e240 00000000
bea0:
00000000 c068bae8 00000000 60000013 00000001 00000000 00000000 c760beec
bec0:
c0064ecc c760bed8 c00ff7d0 c003a0a8 60000013 ffffffff
r5:
fa200000 r4:
ffffffff
[<
c0064eb8>] (sub_preempt_count+0x0/0x100) from [<
c00ff7d0>] (find_and_get_object+0xd0/0x110)
r5:
c068bae8 r4:
00000000
[<
c00ff700>] (find_and_get_object+0x0/0x110) from [<
c00ffdd8>] (scan_block+0x60/0x104)
r8:
00000001 r7:
c0e23795 r6:
c0d76a70 r5:
60000013 r4:
00000000
[<
c00ffd78>] (scan_block+0x0/0x104) from [<
c010014c>] (kmemleak_scan+0x140/0x484)
[<
c010000c>] (kmemleak_scan+0x0/0x484) from [<
c01009a8>] (kmemleak_scan_thread+0x70/0xcc)
r8:
00000000 r7:
c0100938 r6:
00000000 r5:
c7c33f04 r4:
00012c00
[<
c0100938>] (kmemleak_scan_thread+0x0/0xcc) from [<
c0088000>] (kthread+0x90/0x98)
r5:
c7c33f04 r4:
c760bfa8
[<
c0087f70>] (kthread+0x0/0x98) from [<
c006f5e8>] (do_exit+0x0/0x684)
r7:
00000013 r6:
c006f5e8 r5:
c0087f70 r4:
c7c33f04
Code:
e3002312 e58d6000 e2833e16 eb0422d5 (
e5963020)
---[ end trace
f3d5e96f75c297b7 ]---
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 21 Sep 2010 19:01:53 +0000 (15:01 -0400)]
USB: fix bug in initialization of interface minor numbers
Recent changes in the usbhid layer exposed a bug in usbcore. If
CONFIG_USB_DYNAMIC_MINORS is enabled then an interface may be assigned
a minor number of 0. However interfaces that aren't registered as USB
class devices also have their minor number set to 0, during
initialization. As a result usb_find_interface() may return the
wrong interface, leading to a crash.
This patch (as1418) fixes the problem by initializing every
interface's minor number to -1. It also cleans up the
usb_register_dev() function, which besides being somewhat awkwardly
written, does not unwind completely on all its error paths.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Philip J. Turmel <philip@turmel.org>
Tested-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Tested-by: Alex Riesen <raa.lkml@gmail.com>
Tested-by: Matthias Bayer <jackdachef@gmail.com>
CC: Jiri Kosina <jkosina@suse.cz>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavan Savoy [Thu, 19 Aug 2010 18:08:51 +0000 (14:08 -0400)]
Staging: ti-st: remove st_get_plat_device
In order to support multiple ST platform devices, a new symbol
'st_get_plat_device' earlier needed to be exported by the arch/XX/brd-XX.c
file which intends to add the ST platform device.
On removing this dependency, now inside ST driver maintain the array of
ST platform devices that would be registered.
As of now let id=0, as and when we end up having such platforms
where mutliple ST devices can exist, id would come from
protocol drivers (BT, FM and GPS) as to on which platform device
they want to register to.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Anca Emanuel <anca.emanuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Robert Richter [Wed, 15 Sep 2010 16:20:34 +0000 (18:20 +0200)]
perf, x86: Catch spurious interrupts after disabling counters
Some cpus still deliver spurious interrupts after disabling a
counter. This caused 'undelivered NMI' messages. This patch
fixes this. Introduced by:
4177c42: perf, x86: Try to handle unknown nmis with an enabled PMU
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: gorcunov@gmail.com <gorcunov@gmail.com>
Cc: fweisbec@gmail.com <fweisbec@gmail.com>
Cc: ying.huang@intel.com <ying.huang@intel.com>
Cc: ming.m.lin@intel.com <ming.m.lin@intel.com>
Cc: yinghai@kernel.org <yinghai@kernel.org>
Cc: andi@firstfloor.org <andi@firstfloor.org>
Cc: eranian@google.com <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <
20100915162034.GO13563@erda.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Fri, 24 Sep 2010 09:19:53 +0000 (11:19 +0200)]
Merge branch 'amd-iommu/2.6.36' of git://git./linux/kernel/git/joro/linux-2.6-iommu into x86/urgent
Takashi Iwai [Fri, 24 Sep 2010 07:09:42 +0000 (09:09 +0200)]
ALSA: hda - Fix auto-parse of SPDIF input of Realtek codecs
The SPDIF in audio widget must be searched through the list as the widget
that contains the given pin as the connection source. The current code
was implemented in a reverse way.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Naoya Horiguchi [Fri, 10 Sep 2010 04:23:06 +0000 (13:23 +0900)]
hugetlb, rmap: add BUG_ON(!PageLocked) in hugetlb_add_anon_rmap()
Confirming page lock is held in hugetlb_add_anon_rmap() may be useful
to detect possible future problems.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Fri, 10 Sep 2010 04:23:04 +0000 (13:23 +0900)]
hugetlb, rmap: fix confusing page locking in hugetlb_cow()
The "if (!trylock_page)" block in the avoidcopy path of hugetlb_cow()
looks confusing and is buggy. Originally this trylock_page() was
intended to make sure that old_page is locked even when old_page !=
pagecache_page, because then only pagecache_page is locked.
This patch fixes it by moving page locking into hugetlb_fault().
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Fri, 10 Sep 2010 04:23:04 +0000 (13:23 +0900)]
hugetlb, rmap: use hugepage_add_new_anon_rmap() in hugetlb_cow()
Obviously, setting anon_vma for COWed hugepage should be done
by hugepage_add_new_anon_rmap() to scan vmas faster.
This patch fixes it.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Fri, 10 Sep 2010 04:23:03 +0000 (13:23 +0900)]
hugetlb, rmap: always use anon_vma root pointer
This patch applies Andrea's fix given by the following patch into hugepage
rmapping code:
commit
288468c334e98aacbb7e2fb8bde6bc1adcd55e05
Author: Andrea Arcangeli <aarcange@redhat.com>
Date: Mon Aug 9 17:19:09 2010 -0700
This patch uses anon_vma->root and avoids unnecessary overwriting when
anon_vma is already set up.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel J Blueman [Wed, 22 Sep 2010 17:05:35 +0000 (18:05 +0100)]
vgaarb: trivial fix
Correct function being needlessly visible outside compilation unit
when the only users are internal.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Fri, 24 Sep 2010 00:13:17 +0000 (17:13 -0700)]
Merge branch 'kvm-updates/2.6.36' of git://git./virt/kvm/kvm
* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Fix reboot on Intel hosts
KVM: fix irqfd assign/deassign race
Daniel J Blueman [Wed, 22 Sep 2010 16:57:19 +0000 (17:57 +0100)]
drm: radeon cleanup fixes...
Fix string interpreted as trigraph and typo.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel J Blueman [Fri, 24 Sep 2010 00:10:23 +0000 (10:10 +1000)]
drm: fix trivial coding errors
Correct function storage class, and correct assignment type.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel J Blueman [Wed, 22 Sep 2010 16:45:45 +0000 (17:45 +0100)]
drm: ttm sparse fixes.
Correct allocation flags type and function prototype for ANSI C compliance.
[airlied: whitespace fixed]
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ben Skeggs [Thu, 23 Sep 2010 06:44:01 +0000 (16:44 +1000)]
drm/nouveau: fix panels using straps-based mode detection
nouveau_bios_fp_mode() zeroes the mode struct before filling in relevant
entries. This nukes the mode id initialised by drm_mode_create(), and
causes warnings from idr when we try to remove the mode.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Srinivas Eeda [Tue, 21 Sep 2010 23:27:26 +0000 (16:27 -0700)]
o2dlm: force free mles during dlm exit
While umounting, a block mle doesn't get freed if dlm is shutdown after
master request is received but before assert master. This results in unclean
shutdown of dlm domain.
This patch frees all mles that lie around after other nodes were notified about
exiting the dlm and marking dlm state as leaving. Only block mles are expected
to be around, so we log ERROR for other mles but still free them.
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tao Ma [Sun, 19 Sep 2010 05:42:29 +0000 (13:42 +0800)]
ocfs2: Sync inode flags with ext2.
We sync our inode flags with ext2 and define them by hex
values. But actually in commit 3669567(4 years ago), all
these values are moved to include/linux/fs.h. So we'd
better also use them as what ext2 did. So sync our inode
flags with ext2 by using FS_*.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tao Ma [Sun, 19 Sep 2010 05:42:28 +0000 (13:42 +0800)]
ocfs2: Move 'wanted' into parens of ocfs2_resmap_resv_bits.
The first time I read the function ocfs2_resmap_resv_bits, I consider
about what 'wanted' will be used and consider about the comments.
Then I find it is only used if the reservation is empty. ;)
So we'd better move it to the parens so that it make the code more
readable, what's more, ocfs2_resmap_resv_bits is used so frequently
and we should save some cpus.
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tao Ma [Mon, 13 Sep 2010 07:13:50 +0000 (15:13 +0800)]
ocfs2: Use cpu_to_le16 for e_leaf_clusters in ocfs2_bg_discontig_add_extent.
e_leaf_clusters is a le16, so use cpu_to_le16 instead
of cpu_to_le32.
What's more, we change 'clusters' to unsigned int to
signify that the size of 'clusters' isn't important here.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tao Ma [Mon, 13 Sep 2010 06:00:23 +0000 (14:00 +0800)]
ocfs2: update ctime when changing the file's permission by setfacl
In commit 30e2bab, ext3 fixed it. So change it accordingly in ocfs2.
Steps to reproduce:
# touch aaa
# stat -c %Z aaa
1283760364
# setfacl -m 'u::x,g::x,o::x' aaa
# stat -c %Z aaa
1283760364
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>