x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned

Currently we handle SS_AUTODISARM as soon as we have stored the altstack
settings into sigframe - that's the point when we have set the things up
for eventual sigreturn to restore the old settings.  And if we manage to
set the sigframe up (we are not done with that yet), everything's fine.
However, in case of failure we end up with sigframe-to-be abandoned and
SIGSEGV force-delivered.  And in that case we end up with inconsistent
rules - late failures have altstack reset, early ones do not.

It's trivial to get consistent behaviour - just handle SS_AUTODISARM once
we have set the sigframe up and are committed to entering the handler,
i.e.  in signal_delivered().

Link: https://lore.kernel.org/lkml/20200404170604.GN23230@ZenIV.linux.org.uk/
Link: https://github.com/ClangBuiltLinux/linux/issues/876
Link: https://lkml.kernel.org/r/20210422230846.1756380-1-ndesaulniers@google.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: report create_date to kstat.btime

The create_date field of inode in hfsplus is corresponding to
kstat.btime and could be reported in statx.

Link: https://lkml.kernel.org/r/20210416172147.8736-1-cccheng@synology.com
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: James Morris <jamorris@linux.microsoft.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: remove unnecessary oom message

Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message

Remove it can help us save a bit of memory.

Link: https://lkml.kernel.org/r/20210617084944.1279-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nilfs2: remove redundant continue statement in a while-loop

The continue statement at the end of the while-loop is redundant,
remove it.

Addresses-Coverity: ("Continue has no effect")
Link: https://lkml.kernel.org/r/20210621100519.10257-1-colin.king@canonical.com
Link: https://lkml.kernel.org/r/1624557664-17159-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kprobes: remove duplicated strong free_insn_page in x86 and s390

free_insn_page() in x86 and s390 is same with the common weak function in
kernel/kprobes.c.  Plus, the comment "Recover page to RW mode before
releasing it" in x86 seems insensible to be there since resetting mapping
is done by common code in vfree() of module_memfree().  So drop these two
duplicated strong functions and related comment, then mark the common one
in kernel/kprobes.c strong.

Link: https://lkml.kernel.org/r/20210608065736.32656-1-song.bao.hua@hisilicon.com
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init: print out unknown kernel parameters

It is easy to foobar setting a kernel parameter on the command line
without realizing it, there's not much output that you can use to assess
what the kernel did with that parameter by default.

Make it a little more explicit which parameters on the command line
_looked_ like a valid parameter for the kernel, but did not match anything
and ultimately got tossed to init.  This is very similar to the unknown
parameter message received when loading a module.

This assumes the parameters are processed in a normal fashion, some
parameters (dyndbg= for example) don't register their parameter with the
rest of the kernel's parameters, and therefore always show up in this list
(and are also given to init - like the rest of this list).

Another example is BOOT_IMAGE= is highlighted as an offender, which it
technically is, but is passed by LILO and GRUB so most systems will see
that complaint.

An example output where "foobared" and "unrecognized" are intentionally
invalid parameters:

  Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.12-dirty debug log_buf_len=4M foobared unrecognized=foo
  Unknown command line parameters: foobared BOOT_IMAGE=/boot/vmlinuz-5.12-dirty unrecognized=foo

Link: https://lkml.kernel.org/r/20210511211009.42259-1-ahalaney@redhat.com
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Borislav Petkov <bp@suse.de>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: do not complain about positive return values starting with EPOLL

checkpatch complains about positive return values of poll functions.
Example:

WARNING: return of an errno should typically be negative (ie: return -EPOLLIN)
+ return EPOLLIN;

Poll functions return positive values.  The defines for the return values
of poll functions all start with EPOLL, resulting in a number of false
positives.  An often used workaround is to assign poll function return
values to variables and returning that variable, but that is a less than
perfect solution.

There is no error definition which starts with EPOLL, so it is safe to
omit the warning for return values starting with EPOLL.

Link: https://lkml.kernel.org/r/20210622004334.638680-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Joe Perches <joe@perches.com>
Cc: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: improve the indented label test

checkpatch identifies a label only when a terminating colon
immediately follows an identifier.

Bitfield definitions can appear to be labels so ignore any
spaces between the identifier terminating colon and any digit
that may be used to define a bitfield length.

Miscellanea:

o Improve the initial checkpatch comment
o Use the more typical '&&' instead of 'and'
o Require the initial label character to be a non-digit
  (Can't use $Ident here because $Ident allows ## concatenation)
o Use $sline instead of $line to ignore comments
o Use '$sline !~ /.../' instead of '!($line =~ /.../)'

Link: https://lkml.kernel.org/r/b54d673e7cde7de5de0c9ba4dd57dd0858580ca4.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Manikishan Ghantasala <manikishanghantasala@gmail.com>
Cc: Alex Elder <elder@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: scripts/spdxcheck.py now requires python3

Since commit d0259c42abff ("spdxcheck.py: Use Python 3"), spdxcheck.py
explicitly expects to run as python3 script.  If "python" still points to
python v2.7 and the script is executed with "python scripts/spdxcheck.py",
the following error may be seen even if git-python is installed for
python3.

Traceback (most recent call last):
  File "scripts/spdxcheck.py", line 10, in <module>
    import git
ImportError: No module named git

To fix the problem, check for the existence of python3, check if
the script is executable and not just for its existence, and execute
it directly.

Link: https://lkml.kernel.org/r/20210505211720.447111-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Joe Perches <joe@perches.com>
Cc: Bert Vermeulen <bert@biot.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/decompress_unlz4.c: correctly handle zero-padding around initrds.

lz4 compatible decompressor is simple.  The format is underspecified and
relies on EOF notification to determine when to stop.  Initramfs buffer
format[1] explicitly states that it can have arbitrary number of zero
padding.  Thus when operating without a fill function, be extra careful to
ensure that sizes less than 4, or apperantly empty chunksizes are treated
as EOF.

To test this I have created two cpio initrds, first a normal one,
main.cpio.  And second one with just a single /test-file with content
"second" second.cpio.  Then i compressed both of them with gzip, and with
lz4 -l.  Then I created a padding of 4 bytes (dd if=/dev/zero of=pad4 bs=1
count=4).  To create four testcase initrds:

 1) main.cpio.gzip + extra.cpio.gzip = pad0.gzip
 2) main.cpio.lz4  + extra.cpio.lz4 = pad0.lz4
 3) main.cpio.gzip + pad4 + extra.cpio.gzip = pad4.gzip
 4) main.cpio.lz4  + pad4 + extra.cpio.lz4 = pad4.lz4

The pad4 test-cases replicate the initrd load by grub, as it pads and
aligns every initrd it loads.

All of the above boot, however /test-file was not accessible in the initrd
for the testcase #4, as decoding in lz4 decompressor failed.  Also an
error message printed which usually is harmless.

Whith a patched kernel, all of the above testcases now pass, and
/test-file is accessible.

This fixes lz4 initrd decompress warning on every boot with grub.  And
more importantly this fixes inability to load multiple lz4 compressed
initrds with grub.  This patch has been shipping in Ubuntu kernels since
January 2021.

[1] ./Documentation/driver-api/early-userspace/buffer-format.rst

BugLink: https://bugs.launchpad.net/bugs/1835660
Link: https://lore.kernel.org/lkml/20210114200256.196589-1-xnox@ubuntu.com/
Link: https://lkml.kernel.org/r/20210513104831.432975-1-dimitri.ledkov@canonical.com
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Rajat Asthana <thisisrast7@gmail.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lz4_decompress: declare LZ4_decompress_safe_withPrefix64k static

Declare LZ4_decompress_safe_withPrefix64k as static to fix sparse
warning:

> warning: symbol 'LZ4_decompress_safe_withPrefix64k' was not declared.
> Should it be static?

Link: https://lkml.kernel.org/r/20210511154345.610569-1-thisisrast7@gmail.com
Signed-off-by: Rajat Asthana <thisisrast7@gmail.com>
Reviewed-by: Nick Terrell <terrelln@fb.com>
Cc: Gao Xiang <hsiangkao@redhat.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel.h: split out kstrtox() and simple_strtox() to a separate header

kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out kstrtox() and
simple_strtox() helpers.

At the same time convert users in header and lib folders to use new
header.  Though for time being include new header back to kernel.h to
avoid twisted indirected includes for existing users.

[andy.shevchenko@gmail.com: fix documentation references]
Link: https://lkml.kernel.org/r/20210615220003.377901-1-andy.shevchenko@gmail.com
Link: https://lkml.kernel.org/r/20210611185815.44103-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Francis Laniel <laniel_francis@privacyrequired.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Kars Mulder <kerneldev@karsmulder.nl>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test_string.c: allow module removal

The test_string module can't be removed because it lacks an exit hook.
Since there is no reason for it to be permanent, add an empty one to allow
module removal.

Link: https://lkml.kernel.org/r/20210616234503.28678-1-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: uninline simple_strtoull()

Gcc inlines simple_strtoull() too agressively.

Given that all 4 signatures match, everything very efficiently calls or
tailcalls into simple_strtoull():

ffffffff81da0240 <simple_strtoll>:
ffffffff81da0240:       80 3f 2d                cmp    BYTE PTR [rdi],0x2d
ffffffff81da0243:       74 05                   je     ffffffff81da024a <simple_strtoll+0xa>
ffffffff81da0245:       e9 76 ff ff ff          jmp    simple_strtoull
ffffffff81da024a:       48 83 c7 01             add    rdi,0x1
ffffffff81da024e:       e8 6d ff ff ff          call   simple_strtoull
ffffffff81da0253:       48 f7 d8                neg    rax
ffffffff81da0256:       c3                      ret

Space savings (on F34-ish .config)

add/remove: 0/0 grow/shrink: 1/3 up/down: 52/-313 (-261)
Function                                     old     new   delta
vsscanf                                     2167    2219     +52
simple_strtoul                                72       2     -70
simple_strtoll                               143      23    -120
simple_strtol                                143      20    -123

Link: https://lkml.kernel.org/r/YMO2zoOQk2eF34tn@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: memscan() fixlet

Generic version doesn't trucate second argument to char.

Older brother memchr() does as do s390, sparc and i386 assembly versions.

Fortunately, no code passes c >= 256.

Link: https://lkml.kernel.org/r/YLv4cCf0t5UPdyK+@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/mpi: fix spelling mistakes

Fix some spelling mistakes in comments:
flaged ==> flagged
bufer ==> buffer
multipler ==> multiplier
MULTIPLER ==> MULTIPLIER
leaset ==> least
chnage ==> change

Link: https://lkml.kernel.org/r/20210604074401.12198-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/decompressors: fix spelling mistakes

Fix some spelling mistakes in comments:
sentinal ==> sentinel
compresed ==> compressed
dependeny ==> dependency
immediatelly ==> immediately
dervied ==> derived
splitted ==> split
nore ==> not
independed ==> independent
asumed ==> assumed

Link: https://lkml.kernel.org/r/20210604085656.12257-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/math/rational: add Kunit test cases

Adds a number of test cases that cover a range of possible code paths.

[akpm@linux-foundation.org: remove non-ascii characters, fix whitespace]
[colin.king@canonical.com: fix spelling mistake "demominator" -> "denominator"]
Link: https://lkml.kernel.org/r/20210526085049.6393-1-colin.king@canonical.com
Link: https://lkml.kernel.org/r/20210525144250.214670-2-tpiepho@gmail.com
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Oskar Schirmer <oskar@scara.com>
Cc: Yiyuan Guo <yguoaz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/math/rational.c: fix divide by zero

If the input is out of the range of the allowed values, either larger than
the largest value or closer to zero than the smallest non-zero allowed
value, then a division by zero would occur.

In the case of input too large, the division by zero will occur on the
first iteration.  The best result (largest allowed value) will be found by
always choosing the semi-convergent and excluding the denominator based
limit when finding it.

In the case of the input too small, the division by zero will occur on the
second iteration.  The numerator based semi-convergent should not be
calculated to avoid the division by zero.  But the semi-convergent vs
previous convergent test is still needed, which effectively chooses
between 0 (the previous convergent) vs the smallest allowed fraction (best
semi-convergent) as the result.

Link: https://lkml.kernel.org/r/20210525144250.214670-1-tpiepho@gmail.com
Fixes: 323dd2c3ed0 ("lib/math/rational.c: fix possible incorrect result from rational fractions helper")
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Reported-by: Yiyuan Guo <yguoaz@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Oskar Schirmer <oskar@scara.com>
Cc: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

seq_file: drop unused *_escape_mem_ascii()

There are no more users of the seq_escape_mem_ascii() followed by
string_escape_mem_ascii().

Remove them for good.

Link: https://lkml.kernel.org/r/20210504180819.73127-16-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nfsd: avoid non-flexible API in seq_quote_mem()

The seq_escape_mem_ascii() is completely non-flexible and shouldn't be
used.  Replace it with properly called seq_escape_mem().

Link: https://lkml.kernel.org/r/20210504180819.73127-15-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

seq_file: convert seq_escape() to use seq_escape_str()

Convert seq_escape() to use seq_escape_str() rather than open coding it.

Note, for now we leave it as an exported symbol due to some old code that
can't tolerate ctype.h being (indirectly) included.

Link: https://lkml.kernel.org/r/20210504180819.73127-14-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

seq_file: add seq_escape_str() as replica of string_escape_str()

In some cases we want to escape characters from NULL-terminated strings.
Add seq_escape_str() as replica of string_escape_str() for that.

Link: https://lkml.kernel.org/r/20210504180819.73127-13-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

seq_file: introduce seq_escape_mem()

Introduce seq_escape_mem() to allow users to pass additional parameters to
string_escape_mem().

Link: https://lkml.kernel.org/r/20210504180819.73127-12-andriy.shevchenko@linux.intel.com
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add myself as designated reviewer for generic string library

Add myself as designated reviewer for generic string library.

Link: https://lkml.kernel.org/r/20210504180819.73127-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test-string_helpers: add test cases for new features

We have got new flags and hence new features of string_escape_mem().
Add test cases for that.

Link: https://lkml.kernel.org/r/20210504180819.73127-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test-string_helpers: get rid of trailing comma in terminators

Terminators by definition shouldn't accept anything behind.  Make them
robust by removing trailing commas.

Link: https://lkml.kernel.org/r/20210504180819.73127-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test-string_helpers: print flags in hexadecimal format

Since flags are bitmapped, it's better to print them in hexadecimal
format.

Link: https://lkml.kernel.org/r/20210504180819.73127-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string_helpers: allow to append additional characters to be escaped

Introduce a new flag to append additional characters, passed in 'only'
parameter, to be escaped if they fall in the corresponding class.

Link: https://lkml.kernel.org/r/20210504180819.73127-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string_helpers: introduce ESCAPE_NAP to escape non-ASCII and non-printable

Some users may want to have an ASCII based filter for printable only
characters, provided by conjunction of isascii() and isprint() functions.

Here is the addition of a such.

Link: https://lkml.kernel.org/r/20210504180819.73127-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string_helpers: introduce ESCAPE_NA for escaping non-ASCII

Some users may want to have an ASCII based filter, provided by isascii()
function.  Here is the addition of a such.

Link: https://lkml.kernel.org/r/20210504180819.73127-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string_helpers: drop indentation level in string_escape_mem()

The only one conditional is left on the upper level, move the rest to the
same level and drop indentation level.  No functional changes.

Link: https://lkml.kernel.org/r/20210504180819.73127-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string_helpers: move ESCAPE_NP check inside 'else' branch in a loop

Refactor code to have better readability by moving ESCAPE_NP handling
inside 'else' branch in the loop.

No functional change intended.

Link: https://lkml.kernel.org/r/20210504180819.73127-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string_helpers: switch to use BIT() macro

Patch series "lib/string_helpers: get rid of ugly *_escape_mem_ascii()", v3.

Get rid of ugly *_escape_mem_ascii() API since it's not flexible and has
the only single user.  Provide better approach based on usage of the
string_escape_mem() with appropriate flags.

Test cases has been expanded accordingly to cover new functionality.

This patch (of 15):

Switch to use BIT() macro for flag definitions.  No changes implied.

Link: https://lkml.kernel.org/r/20210504180819.73127-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210504180819.73127-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: decompress_bunzip2: remove an unneeded semicolon

The semicolon immediately following '}' is unneeded.

Link: https://lkml.kernel.org/r/20210508094926.2889-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel.h: split out panic and oops helpers

kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.

There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain

At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.

[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm: include only needed headers in ascii85.h

The ascii85.h is user of exactly two headers, i.e.  math.h and types.h.
There is no need to carry on entire kernel.h.

Link: https://lkml.kernel.org/r/20210611185915.44181-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: remove redundant assignment to first

Variable first is set to '0', but this value is never read as it is not
used later on, hence it is a redundant assignment and can be removed.

Clean up the following clang-analyzer warning:

kernel/sysctl.c:1562:4: warning: Value stored to 'first' is never read
[clang-analyzer-deadcode.DeadStores].

Link: https://lkml.kernel.org/r/1620469990-22182-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

procfs/dmabuf: add inode number to /proc/*/fdinfo

And 'ino' field to /proc/<pid>/fdinfo/<FD> and
/proc/<pid>/task/<tid>/fdinfo/<FD>.

The inode numbers can be used to uniquely identify DMA buffers in user
space and avoids a dependency on /proc/<pid>/fd/* when accounting
per-process DMA buffer sizes.

Link: https://lkml.kernel.org/r/20210308170651.919148-2-kaleshsingh@google.com
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

procfs: allow reading fdinfo with PTRACE_MODE_READ

Android captures per-process system memory state when certain low memory
events (e.g a foreground app kill) occur, to identify potential memory
hoggers.  In order to measure how much memory a process actually consumes,
it is necessary to include the DMA buffer sizes for that process in the
memory accounting.  Since the handle to DMA buffers are raw FDs, it is
important to be able to identify which processes have FD references to a
DMA buffer.

Currently, DMA buffer FDs can be accounted using /proc/<pid>/fd/* and
/proc/<pid>/fdinfo -- both are only readable by the process owner, as
follows:

  1. Do a readlink on each FD.
  2. If the target path begins with "/dmabuf", then the FD is a dmabuf FD.
  3. stat the file to get the dmabuf inode number.
  4. Read/ proc/<pid>/fdinfo/<fd>, to get the DMA buffer size.

Accessing other processes' fdinfo requires root privileges.  This limits
the use of the interface to debugging environments and is not suitable for
production builds.  Granting root privileges even to a system process
increases the attack surface and is highly undesirable.

Since fdinfo doesn't permit reading process memory and manipulating
process state, allow accessing fdinfo under PTRACE_MODE_READ_FSCRED.

Link: https://lkml.kernel.org/r/20210308170651.919148-1-kaleshsingh@google.com
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Suggested-by: Jann Horn <jannh@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: James Morris <jamorris@linux.microsoft.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: Avoid mixing integer types in mem_rw()

Use size_t when capping the count argument received by mem_rw(). Since
count is size_t, using min_t(int, ...) can lead to a negative value
that will later be passed to access_remote_vm(), which can cause
unexpected behavior.

Since we are capping the value to at maximum PAGE_SIZE, the conversion
from size_t to int when passing it to access_remote_vm() as "len"
shouldn't be a problem.

Link: https://lkml.kernel.org/r/20210512125215.3348316-1-marcelo.cerri@canonical.com
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Souza Cascardo <cascardo@canonical.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nouveau/svm: implement atomic SVM access

Some NVIDIA GPUs do not support direct atomic access to system memory via
PCIe.  Instead this must be emulated by granting the GPU exclusive access
to the memory.  This is achieved by replacing CPU page table entries with
special swap entries that fault on userspace access.

The driver then grants the GPU permission to update the page undergoing
atomic access via the GPU page tables.  When CPU access to the page is
required a CPU fault is raised which calls into the device driver via MMU
notifiers to revoke the atomic access.  The original page table entries
are then restored allowing CPU access to proceed.

Link: https://lkml.kernel.org/r/20210616105937.23201-11-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nouveau/svm: refactor nouveau_range_fault

Call mmu_interval_notifier_insert() as part of nouveau_range_fault().
This doesn't introduce any functional change but makes it easier for a
subsequent patch to alter the behaviour of nouveau_range_fault() to
support GPU atomic operations.

Link: https://lkml.kernel.org/r/20210616105937.23201-10-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: selftests for exclusive device memory

Adds some selftests for exclusive device memory.

Link: https://lkml.kernel.org/r/20210616105937.23201-9-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: device exclusive memory access

Some devices require exclusive write access to shared virtual memory (SVM)
ranges to perform atomic operations on that memory.  This requires CPU
page tables to be updated to deny access whilst atomic operations are
occurring.

In order to do this introduce a new swap entry type
(SWP_DEVICE_EXCLUSIVE).  When a SVM range needs to be marked for exclusive
access by a device all page table mappings for the particular range are
replaced with device exclusive swap entries.  This causes any CPU access
to the page to result in a fault.

Faults are resovled by replacing the faulting entry with the original
mapping.  This results in MMU notifiers being called which a driver uses
to update access permissions such as revoking atomic access.  After
notifiers have been called the device will no longer have exclusive access
to the region.

Walking of the page tables to find the target pages is handled by
get_user_pages() rather than a direct page table walk.  A direct page
table walk similar to what migrate_vma_collect()/unmap() does could also
have been utilised.  However this resulted in more code similar in
functionality to what get_user_pages() provides as page faulting is
required to make the PTEs present and to break COW.

[dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()]
Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda
Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory.c: allow different return codes for copy_nonpresent_pte()

Currently if copy_nonpresent_pte() returns a non-zero value it is assumed
to be a swap entry which requires further processing outside the loop in
copy_pte_range() after dropping locks.  This prevents other values being
returned to signal conditions such as failure which a subsequent change
requires.

Instead make copy_nonpresent_pte() return an error code if further
processing is required and read the value for the swap entry in the main
loop under the ptl.

Link: https://lkml.kernel.org/r/20210616105937.23201-7-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: rename migrate_pgmap_owner

MMU notifier ranges have a migrate_pgmap_owner field which is used by
drivers to store a pointer.  This is subsequently used by the driver
callback to filter MMU_NOTIFY_MIGRATE events.  Other notifier event types
can also benefit from this filtering, so rename the 'migrate_pgmap_owner'
field to 'owner' and create a new notifier initialisation function to
initialise this field.

Link: https://lkml.kernel.org/r/20210616105937.23201-6-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Suggested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/rmap: split migration into its own function

Migration is currently implemented as a mode of operation for
try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag
or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE.

However it does not have much in common with the rest of the unmap
functionality of try_to_unmap_one() and thus splitting it into a separate
function reduces the complexity of try_to_unmap_one() making it more
readable.

Several simplifications can also be made in try_to_migrate_one() based on
the following observations:

 - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK.
 - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON.
 - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH.

TTU_SPLIT_FREEZE is a special case of migration used when splitting an
anonymous page.  This is most easily dealt with by calling the correct
function from unmap_page() in mm/huge_memory.c - either try_to_migrate()
for PageAnon or try_to_unmap().

Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/rmap: split try_to_munlock from try_to_unmap

The behaviour of try_to_unmap_one() is difficult to follow because it
performs different operations based on a fairly large set of flags used in
different combinations.

TTU_MUNLOCK is one such flag.  However it is exclusively used by
try_to_munlock() which specifies no other flags.  Therefore rather than
overload try_to_unmap_one() with unrelated behaviour split this out into
it's own function and remove the flag.

Link: https://lkml.kernel.org/r/20210616105937.23201-4-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/swapops: rework swap entry manipulation code

Both migration and device private pages use special swap entries that are
manipluated by a range of inline functions.  The arguments to these are
somewhat inconsistent so rework them to remove flag type arguments and to
make the arguments similar for both read and write entry creation.

Link: https://lkml.kernel.org/r/20210616105937.23201-3-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove special swap entry functions

Patch series "Add support for SVM atomics in Nouveau", v11.

Introduction
============

Some devices have features such as atomic PTE bits that can be used to
implement atomic access to system memory.  To support atomic operations to
a shared virtual memory page such a device needs access to that page which
is exclusive of the CPU.  This series introduces a mechanism to
temporarily unmap pages granting exclusive access to a device.

These changes are required to support OpenCL atomic operations in Nouveau
to shared virtual memory (SVM) regions allocated with the
CL_MEM_SVM_ATOMICS clSVMAlloc flag.  A more complete description of the
OpenCL SVM feature is available at
https://www.khronos.org/registry/OpenCL/specs/3.0-unified/html/
OpenCL_API.html#_shared_virtual_memory .

Implementation
==============

Exclusive device access is implemented by adding a new swap entry type
(SWAP_DEVICE_EXCLUSIVE) which is similar to a migration entry.  The main
difference is that on fault the original entry is immediately restored by
the fault handler instead of waiting.

Restoring the entry triggers calls to MMU notifers which allows a device
driver to revoke the atomic access permission from the GPU prior to the
CPU finalising the entry.

Patches
=======

Patches 1 & 2 refactor existing migration and device private entry
functions.

Patches 3 & 4 rework try_to_unmap_one() by splitting out unrelated
functionality into separate functions - try_to_migrate_one() and
try_to_munlock_one().

Patch 5 renames some existing code but does not introduce functionality.

Patch 6 is a small clean-up to swap entry handling in copy_pte_range().

Patch 7 contains the bulk of the implementation for device exclusive
memory.

Patch 8 contains some additions to the HMM selftests to ensure everything
works as expected.

Patch 9 is a cleanup for the Nouveau SVM implementation.

Patch 10 contains the implementation of atomic access for the Nouveau
driver.

Testing
=======

This has been tested with upstream Mesa 21.1.0 and a simple OpenCL program
which checks that GPU atomic accesses to system memory are atomic.
Without this series the test fails as there is no way of write-protecting
the page mapping which results in the device clobbering CPU writes.  For
reference the test is available at
https://ozlabs.org/~apopple/opencl_svm_atomics/

Further testing has been performed by adding support for testing exclusive
access to the hmm-tests kselftests.

This patch (of 10):

Remove multiple similar inline functions for dealing with different types
of special swap entries.

Both migration and device private swap entries use the swap offset to
store a pfn.  Instead of multiple inline functions to obtain a struct page
for each swap entry type use a common function pfn_swap_entry_to_page().
Also open-code the various entry_to_pfn() functions as this results is
shorter code that is easier to understand.

Link: https://lkml.kernel.org/r/20210616105937.23201-1-apopple@nvidia.com
Link: https://lkml.kernel.org/r/20210616105937.23201-2-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kfence: unconditionally use unbound work queue

Unconditionally use unbound work queue, and not just if wq_power_efficient
is true.  Because if the system is idle, KFENCE may wait, and by being run
on the unbound work queue, we permit the scheduler to make better
scheduling decisions and not require pinning KFENCE to the same CPU upon
waking up.

Link: https://lkml.kernel.org/r/20210521111630.472579-1-elver@google.com
Fixes: 36f0b35d0894 ("kfence: use power-efficient work queue to run delayed work")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Hillf Danton <hdanton@sina.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: define default pmd_pgtable()

Currently most platforms define pmd_pgtable() as pmd_page() duplicating
the same code all over.  Instead just define a default value i.e
pmd_page() for pmd_pgtable() and let platforms override when required via
<asm/pgtable.h>.  All the existing platform that override pmd_pgtable()
have been moved into their respective <asm/pgtable.h> header in order to
precede before the new generic definition.  This makes it much cleaner
with reduced code.

Link: https://lkml.kernel.org/r/1623646133-20306-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/swap: make NODE_DATA an inline function on CONFIG_FLATMEM

make W=1 generates the following warning in mm/workingset.c for allnoconfig

  mm/workingset.c: In function `unpack_shadow':
  mm/workingset.c:201:15: warning: variable `nid' set but not used [-Wunused-but-set-variable]
    int memcgid, nid;
                 ^~~

On FLATMEM, NODE_DATA returns a global pglist_data without dereferencing
nid.  Make the helper an inline function to suppress the warning, add type
checking and to apply any side-effects in the parameter list.

Link: https://lkml.kernel.org/r/20210520084809.8576-15-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc: move prototype for find_suitable_fallback

make W=1 generates the following warning in mmap_lock.c for allnoconfig

  mm/page_alloc.c:2670:5: warning: no previous prototype for `find_suitable_fallback' [-Wmissing-prototypes]
   int find_suitable_fallback(struct free_area *area, unsigned int order,
       ^~~~~~~~~~~~~~~~~~~~~~

find_suitable_fallback is only shared outside of page_alloc.c for
CONFIG_COMPACTION but to suppress the warning, move the protype outside of
CONFIG_COMPACTION.  It is not worth the effort at this time to find a
clever way of allowing compaction.c to share the code or avoid the use
entirely as the function is called on relatively slow paths.

Link: https://lkml.kernel.org/r/20210520084809.8576-14-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmap_lock: remove dead code for !CONFIG_TRACING configurations

make W=1 generates the following warning in mmap_lock.c for allnoconfig

  mm/mmap_lock.c:213:6: warning: no previous prototype for `__mmap_lock_do_trace_start_locking' [-Wmissing-prototypes]
   void __mmap_lock_do_trace_start_locking(struct mm_struct *mm, bool write)
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  mm/mmap_lock.c:219:6: warning: no previous prototype for `__mmap_lock_do_trace_acquire_returned' [-Wmissing-prototypes]
   void __mmap_lock_do_trace_acquire_returned(struct mm_struct *mm, bool write,
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  mm/mmap_lock.c:226:6: warning: no previous prototype for `__mmap_lock_do_trace_released' [-Wmissing-prototypes]
   void __mmap_lock_do_trace_released(struct mm_struct *mm, bool write)

On !CONFIG_TRACING configurations, the code is dead so put it behind an
#ifdef.

[cuibixuan@huawei.com: fix warning when CONFIG_TRACING is not defined]
Link: https://lkml.kernel.org/r/20210531033426.74031-1-cuibixuan@huawei.com
Link: https://lkml.kernel.org/r/20210520084809.8576-13-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/swap: make swap_address_space an inline function

make W=1 generates the following warning in page_mapping() for allnoconfig

  mm/util.c:700:15: warning: variable `entry' set but not used [-Wunused-but-set-variable]
     swp_entry_t entry;
                 ^~~~~

swap_address is a #define on !CONFIG_SWAP configurations.  Make the helper
an inline function to suppress the warning, add type checking and to apply
any side-effects in the parameter list.

Link: https://lkml.kernel.org/r/20210520084809.8576-12-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/z3fold: add kerneldoc fields for z3fold_pool

make W=1 generates the following warning for z3fold_pool

  mm/z3fold.c:171: warning: Function parameter or member 'zpool' not described in 'z3fold_pool'
  mm/z3fold.c:171: warning: Function parameter or member 'zpool_ops' not described in 'z3fold_pool'

Commit 9a001fc19ccc ("z3fold: the 3-fold allocator for compressed pages")
simply did not document the fields at the time.  Add rudimentary
documentation.

Link: https://lkml.kernel.org/r/20210520084809.8576-11-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zbud: add kerneldoc fields for zbud_pool

make W=1 generates the following warning for zbud_pool

  mm/zbud.c:105: warning: Function parameter or member 'zpool' not described in 'zbud_pool'
  mm/zbud.c:105: warning: Function parameter or member 'zpool_ops' not described in 'zbud_pool'

Commit 479305fd7172 ("zpool: remove zpool_evict()") removed the
zpool_evict helper and added the associated zpool and operations structure
in struct zbud_pool but did not add documentation for the fields.  Add
rudimentary documentation.

Link: https://lkml.kernel.org/r/20210520084809.8576-10-mgorman@techsingularity.net
Fixes: 479305fd7172 ("zpool: remove zpool_evict()")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: fix kerneldoc comment for __remove_memory

make W=1 generates the following warning for __remove_memory

  mm/memory_hotplug.c:2044: warning: expecting prototype for remove_memory(). Prototype was for __remove_memory() instead

Commit eca499ab3749 ("mm/hotplug: make remove_memory() interface usable")
introduced the kerneldoc comment and function but the kerneldoc name and
function name did not match.

Link: https://lkml.kernel.org/r/20210520084809.8576-9-mgorman@techsingularity.net
Fixes: eca499ab3749 ("mm/hotplug: make remove_memory() interface usable")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: fix kerneldoc comment for __try_online_node

make W=1 generates the following warning for try_online_node

mm/memory_hotplug.c:1087: warning: expecting prototype for try_online_node(). Prototype was for __try_online_node() instead

Commit b9ff036082cd ("mm/memory_hotplug.c: make add_memory_resource use
__try_online_node") renamed the function but did not update the associated
kerneldoc.  The function is static and somewhat specialised in nature so
it's not clear it warrants being a kerneldoc by moving the comment to
try_online_node.  Hence, leave the comment of the internal helper in place
but leave it out of kerneldoc and correct the function name in the
comment.

Link: https://lkml.kernel.org/r/20210520084809.8576-8-mgorman@techsingularity.net
Fixes: Commit b9ff036082cd ("mm/memory_hotplug.c: make add_memory_resource use __try_online_node")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcontrol.c: fix kerneldoc comment for mem_cgroup_calculate_protection

make W=1 generates the following warning for mem_cgroup_calculate_protection

  mm/memcontrol.c:6468: warning: expecting prototype for mem_cgroup_protected(). Prototype was for mem_cgroup_calculate_protection() instead

Commit 45c7f7e1ef17 ("mm, memcg: decouple e{low,min} state mutations from
protection checks") changed the function definition but not the associated
kerneldoc comment.

Link: https://lkml.kernel.org/r/20210520084809.8576-7-mgorman@techsingularity.net
Fixes: 45c7f7e1ef17 ("mm, memcg: decouple e{low,min} state mutations from protection checks")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mapping_dirty_helpers: remove double Note in kerneldoc

make W=1 generates the following warning for mm/mapping_dirty_helpers.c

mm/mapping_dirty_helpers.c:325: warning: duplicate section name 'Note'

The helper function is very specific to one driver -- vmwgfx.  While the
two notes are separate, all of it needs to be taken into account when
using the helper so make it one note.

Link: https://lkml.kernel.org/r/20210520084809.8576-5-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc: make should_fail_alloc_page() static

make W=1 generates the following warning for mm/page_alloc.c

  mm/page_alloc.c:3651:15: warning: no previous prototype for `should_fail_alloc_page' [-Wmissing-prototypes]
   noinline bool should_fail_alloc_page(gfp_t gfp_mask, unsigned int order)
                 ^~~~~~~~~~~~~~~~~~~~~~

This function is deliberately split out for BPF to allow errors to be
injected.  The function is not used anywhere else so it is local to the
file.  Make it static which should still allow error injection to be used
similar to how block/blk-core.c:should_fail_bio() works.

Link: https://lkml.kernel.org/r/20210520084809.8576-4-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc: include header for prototype of set_iounmap_nonlazy

make W=1 generates the following warning for mm/vmalloc.c

  mm/vmalloc.c:1599:6: warning: no previous prototype for `set_iounmap_nonlazy' [-Wmissing-prototypes]
   void set_iounmap_nonlazy(void)
        ^~~~~~~~~~~~~~~~~~~

This is an arch-generic function only used by x86.  On other arches, it's
dead code.  Include the header with the definition and make it x86-64
specific.

Link: https://lkml.kernel.org/r/20210520084809.8576-3-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: remove kerneldoc-like comment from isolate_lru_pages

Patch series "Clean W=1 build warnings for mm/".

This is a janitorial only.  During development of a tool to catch build
warnings early to avoid tripping the Intel lkp-robot, I noticed that mm/
is not clean for W=1.  This is generally harmless but there is no harm in
cleaning it up.  It disrupts git blame a little but on relatively obvious
lines that are unlikely to be git blame targets.

This patch (of 13):

make W=1 generates the following warning for vmscan.c

    mm/vmscan.c:1814: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

It is not a kerneldoc comment and isolate_lru_pages() is a static
function.  While the detailed comment is nice, it does not need to be
exposed via kernel-doc.

Link: https://lkml.kernel.org/r/20210520084809.8576-1-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20210520084809.8576-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix spelling mistakes

Fix some spelling mistakes in comments:
each having differents usage ==> each has a different usage
statments ==> statements
adresses ==> addresses
aggresive ==> aggressive
datas ==> data
posion ==> poison
higer ==> higher
precisly ==> precisely
wont ==> won't
We moves tha ==> We move the
endianess ==> endianness

Link: https://lkml.kernel.org/r/20210519065853.7723-2-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: define default value for FIRST_USER_ADDRESS

Currently most platforms define FIRST_USER_ADDRESS as 0UL duplication the
same code all over.  Instead just define a generic default value (i.e 0UL)
for FIRST_USER_ADDRESS and let the platforms override when required.  This
makes it much cleaner with reduced code.

The default FIRST_USER_ADDRESS here would be skipped in <linux/pgtable.h>
when the given platform overrides its value via <asm/pgtable.h>.

Link: https://lkml.kernel.org/r/1620615725-24623-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Guo Ren <guoren@kernel.org> [csky]
Acked-by: Stafford Horne <shorne@gmail.com> [openrisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> [RISC-V]
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix typos and grammar error in comments

We moves tha -> We move that in mm/swap.c
statments -> statements in include/linux/mm.h

Link: https://lkml.kernel.org/r/20210509063444.GA24745@hyeyoo
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: move backing_dev under macro CONFIG_ZRAM_WRITEBACK

backing_dev is never used when not enable CONFIG_ZRAM_WRITEBACK and it's
introduced from writeback feature.  So it's needless also affect
readability in that case.

Link: https://lkml.kernel.org/r/20210521060544.2385-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zsmalloc.c: improve readability for async_free_zspage()

The class is extracted from pool->size_class[class_idx] again before
calling __free_zspage().  It looks like class will change after we fetch
the class lock.  But this is misleading as class will stay unchanged.

Link: https://lkml.kernel.org/r/20210624123930.1769093-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zsmalloc.c: remove confusing code in obj_free()

Patch series "Cleanup for zsmalloc".

This series contains cleanups to remove confusing code in obj_free(),
combine two atomic ops and improve readability for async_free_zspage().
More details can be found in the respective changelogs.

This patch (of 2):

OBJ_ALLOCATED_TAG is only set for handle to indicate allocated object.
It's irrelevant with obj.  So remove this misleading code to improve
readability.

Link: https://lkml.kernel.org/r/20210624123930.1769093-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210624123930.1769093-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zswap.c: fix two bugs in zswap_writeback_entry()

In the ZSWAP_SWAPCACHE_FAIL and ZSWAP_SWAPCACHE_EXIST case, we forgot to
call zpool_unmap_handle() when zpool can't sleep. And we might sleep in
zswap_get_swap_cache_page() while zpool can't sleep. To fix all of these,
zpool_unmap_handle() should be done before zswap_get_swap_cache_page()
when zpool can't sleep.

Link: https://lkml.kernel.org/r/20210522092242.3233191-4-linmiaohe@huawei.com
Fixes: fc6697a89f56 ("mm/zswap: add the flag can_sleep_mapped")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zswap.c: avoid unnecessary copy-in at map time

The buf mapped via zpool_map_handle() is only used to store compressed
page buffer and there is no information to extract from it. So we could
use ZPOOL_MM_WO instead to avoid unnecessary copy-in at map time.

Link: https://lkml.kernel.org/r/20210522092242.3233191-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zswap.c: remove unused function zswap_debugfs_exit()

Patch series "Cleanup and fixup for zswap".

This series contains cleanups to remove unused function and avoid
unnecessary copy-in at map time.  Also this fixes two bugs in the function
zswap_writeback_entry().  More details can be found in the respective
changelogs.

This patch (of 3):

zswap_debugfs_exit() is unused, remove it.

Link: https://lkml.kernel.org/r/20210522092242.3233191-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210522092242.3233191-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm,memory_hotplug: drop unneeded locking

Currently, memory-hotplug code takes zone's span_writelock and pgdat's
resize_lock when resizing the node/zone's spanned pages via
{move_pfn_range_to_zone(),remove_pfn_range_from_zone()} and when resizing
node and zone's present pages via adjust_present_page_count().

These locks are also taken during the initialization of the system at boot
time, where it protects parallel struct page initialization, but they
should not really be needed in memory-hotplug where all operations are a)
synchronized on device level and b) serialized by the mem_hotplug_lock
lock.

[akpm@linux-foundation.org: remove now-unused locals]

Link: https://lkml.kernel.org/r/20210531093958.15021-1-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: rate limit page migration warnings

When offlining memory the system can attempt to migrate a lot of pages, if
there are problems with migration this can flood the logs.  Printing all
the data hogs the CPU and cause some RT threads to run for a long time,
which may have some bad consequences.

Rate limit the page migration warnings in order to avoid this.

Link: https://lkml.kernel.org/r/20210505140542.24935-1-georgi.djakov@linaro.org
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests/vm: add test for MADV_POPULATE_(READ|WRITE)

Let's add a simple test for MADV_POPULATE_READ and MADV_POPULATE_WRITE,
verifying some error handling, that population works, and that softdirty
tracking works as expected.  For now, limit the test to private anonymous
memory.

Link: https://lkml.kernel.org/r/20210419135443.12822-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests/vm: add protection_keys_32 / protection_keys_64 to gitignore

We missed adding two binaries to gitignore.

Link: https://lkml.kernel.org/r/20210419135443.12822-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rik van Riel <riel@surriel.com>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add tools/testing/selftests/vm/ to MEMORY MANAGEMENT

MEMORY MANAGEMENT seems to be a good fit.

Link: https://lkml.kernel.org/r/20210419135443.12822-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rik van Riel <riel@surriel.com>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables

I. Background: Sparse Memory Mappings

When we manage sparse memory mappings dynamically in user space - also
sometimes involving MAP_NORESERVE - we want to dynamically populate/
discard memory inside such a sparse memory region.  Example users are
hypervisors (especially implementing memory ballooning or similar
technologies like virtio-mem) and memory allocators.  In addition, we want
to fail in a nice way (instead of generating SIGBUS) if populating does
not succeed because we are out of backend memory (which can happen easily
with file-based mappings, especially tmpfs and hugetlbfs).

While MADV_DONTNEED, MADV_REMOVE and FALLOC_FL_PUNCH_HOLE allow for
reliably discarding memory for most mapping types, there is no generic
approach to populate page tables and preallocate memory.

Although mmap() supports MAP_POPULATE, it is not applicable to the concept
of sparse memory mappings, where we want to populate/discard dynamically
and avoid expensive/problematic remappings.  In addition, we never
actually report errors during the final populate phase - it is best-effort
only.

fallocate() can be used to preallocate file-based memory and fail in a
safe way.  However, it cannot really be used for any private mappings on
anonymous files via memfd due to COW semantics.  In addition, fallocate()
does not actually populate page tables, so we still always get pagefaults
on first access - which is sometimes undesired (i.e., real-time workloads)
and requires real prefaulting of page tables, not just a preallocation of
backend storage.  There might be interesting use cases for sparse memory
regions along with mlockall(MCL_ONFAULT) which fallocate() cannot satisfy
as it does not prefault page tables.

II. On preallcoation/prefaulting from user space

Because we don't have a proper interface, what applications (like QEMU and
databases) end up doing is touching (i.e., reading+writing one byte to not
overwrite existing data) all individual pages.

However, that approach
1) Can result in wear on storage backing, because we end up reading/writing
   each page; this is especially a problem for dax/pmem.
2) Can result in mmap_sem contention when prefaulting via multiple
   threads.
3) Requires expensive signal handling, especially to catch SIGBUS in case
   of hugetlbfs/shmem/file-backed memory. For example, this is
   problematic in hypervisors like QEMU where SIGBUS handlers might already
   be used by other subsystems concurrently to e.g, handle hardware errors.
   "Simply" doing preallocation concurrently from other thread is not that
   easy.

III. On MADV_WILLNEED

Extending MADV_WILLNEED is not an option because
1. It would change the semantics: "Expect access in the near future." and
   "might be a good idea to read some pages" vs. "Definitely populate/
   preallocate all memory and definitely fail on errors.".
2. Existing users (like virtio-balloon in QEMU when deflating the balloon)
   don't want populate/prealloc semantics. They treat this rather as a hint
   to give a little performance boost without too much overhead - and don't
   expect that a lot of memory might get consumed or a lot of time
   might be spent.

IV. MADV_POPULATE_READ and MADV_POPULATE_WRITE

Let's introduce MADV_POPULATE_READ and MADV_POPULATE_WRITE, inspired by
MAP_POPULATE, with the following semantics:
1. MADV_POPULATE_READ can be used to prefault page tables just like
   manually reading each individual page. This will not break any COW
   mappings. The shared zero page might get mapped and no backend storage
   might get preallocated -- allocation might be deferred to
   write-fault time. Especially shared file mappings require an explicit
   fallocate() upfront to actually preallocate backend memory (blocks in
   the file system) in case the file might have holes.
2. If MADV_POPULATE_READ succeeds, all page tables have been populated
   (prefaulted) readable once.
3. MADV_POPULATE_WRITE can be used to preallocate backend memory and
   prefault page tables just like manually writing (or
   reading+writing) each individual page. This will break any COW
   mappings -- e.g., the shared zeropage is never populated.
4. If MADV_POPULATE_WRITE succeeds, all page tables have been populated
   (prefaulted) writable once.
5. MADV_POPULATE_READ and MADV_POPULATE_WRITE cannot be applied to special
   mappings marked with VM_PFNMAP and VM_IO. Also, proper access
   permissions (e.g., PROT_READ, PROT_WRITE) are required. If any such
   mapping is encountered, madvise() fails with -EINVAL.
6. If MADV_POPULATE_READ or MADV_POPULATE_WRITE fails, some page tables
   might have been populated.
7. MADV_POPULATE_READ and MADV_POPULATE_WRITE will return -EHWPOISON
   when encountering a HW poisoned page in the range.
8. Similar to MAP_POPULATE, MADV_POPULATE_READ and MADV_POPULATE_WRITE
   cannot protect from the OOM (Out Of Memory) handler killing the
   process.

While the use case for MADV_POPULATE_WRITE is fairly obvious (i.e.,
preallocate memory and prefault page tables for VMs), one issue is that
whenever we prefault pages writable, the pages have to be marked dirty,
because the CPU could dirty them any time.  while not a real problem for
hugetlbfs or dax/pmem, it can be a problem for shared file mappings: each
page will be marked dirty and has to be written back later when evicting.

MADV_POPULATE_READ allows for optimizing this scenario: Pre-read a whole
mapping from backend storage without marking it dirty, such that eviction
won't have to write it back.  As discussed above, shared file mappings
might require an explciit fallocate() upfront to achieve
preallcoation+prepopulation.

Although sparse memory mappings are the primary use case, this will also
be useful for other preallocate/prefault use cases where MAP_POPULATE is
not desired or the semantics of MAP_POPULATE are not sufficient: as one
example, QEMU users can trigger preallocation/prefaulting of guest RAM
after the mapping was created -- and don't want errors to be silently
suppressed.

Looking at the history, MADV_POPULATE was already proposed in 2013 [1],
however, the main motivation back than was performance improvements --
which should also still be the case.

V. Single-threaded performance comparison

I did a short experiment, prefaulting page tables on completely *empty
mappings/files* and repeated the experiment 10 times.  The results
correspond to the shortest execution time.  In general, the performance
benefit for huge pages is negligible with small mappings.

V.1: Private mappings

POPULATE_READ and POPULATE_WRITE is fastest.  Note that
Reading/POPULATE_READ will populate the shared zeropage where applicable
-- which result in short population times.

The fastest way to allocate backend storage (here: swap or huge pages) and
prefault page tables is POPULATE_WRITE.

V.2: Shared mappings

fallocate() is fastest, however, doesn't prefault page tables.
POPULATE_WRITE is faster than simple writes and read/writes.
POPULATE_READ is faster than simple reads.

Without a fd, the fastest way to allocate backend storage and prefault
page tables is POPULATE_WRITE.  With an fd, the fastest way is usually
FALLOCATE+POPULATE_READ or FALLOCATE+POPULATE_WRITE respectively; one
exception are actual files: FALLOCATE+Read is slightly faster than
FALLOCATE+POPULATE_READ.

The fastest way to allocate backend storage prefault page tables is
FALLOCATE+POPULATE_WRITE -- except when dealing with actual files; then,
FALLOCATE+POPULATE_READ is fastest and won't directly mark all pages as
dirty.

v.3: Detailed results

==================================================
2 MiB MAP_PRIVATE:
**************************************************
Anon 4 KiB     : Read                     :     0.119 ms
Anon 4 KiB     : Write                    :     0.222 ms
Anon 4 KiB     : Read/Write               :     0.380 ms
Anon 4 KiB     : POPULATE_READ            :     0.060 ms
Anon 4 KiB     : POPULATE_WRITE           :     0.158 ms
Memfd 4 KiB    : Read                     :     0.034 ms
Memfd 4 KiB    : Write                    :     0.310 ms
Memfd 4 KiB    : Read/Write               :     0.362 ms
Memfd 4 KiB    : POPULATE_READ            :     0.039 ms
Memfd 4 KiB    : POPULATE_WRITE           :     0.229 ms
Memfd 2 MiB    : Read                     :     0.030 ms
Memfd 2 MiB    : Write                    :     0.030 ms
Memfd 2 MiB    : Read/Write               :     0.030 ms
Memfd 2 MiB    : POPULATE_READ            :     0.030 ms
Memfd 2 MiB    : POPULATE_WRITE           :     0.030 ms
tmpfs          : Read                     :     0.033 ms
tmpfs          : Write                    :     0.313 ms
tmpfs          : Read/Write               :     0.406 ms
tmpfs          : POPULATE_READ            :     0.039 ms
tmpfs          : POPULATE_WRITE           :     0.285 ms
file           : Read                     :     0.033 ms
file           : Write                    :     0.351 ms
file           : Read/Write               :     0.408 ms
file           : POPULATE_READ            :     0.039 ms
file           : POPULATE_WRITE           :     0.290 ms
hugetlbfs      : Read                     :     0.030 ms
hugetlbfs      : Write                    :     0.030 ms
hugetlbfs      : Read/Write               :     0.030 ms
hugetlbfs      : POPULATE_READ            :     0.030 ms
hugetlbfs      : POPULATE_WRITE           :     0.030 ms
**************************************************
4096 MiB MAP_PRIVATE:
**************************************************
Anon 4 KiB     : Read                     :   237.940 ms
Anon 4 KiB     : Write                    :   708.409 ms
Anon 4 KiB     : Read/Write               :  1054.041 ms
Anon 4 KiB     : POPULATE_READ            :   124.310 ms
Anon 4 KiB     : POPULATE_WRITE           :   572.582 ms
Memfd 4 KiB    : Read                     :   136.928 ms
Memfd 4 KiB    : Write                    :   963.898 ms
Memfd 4 KiB    : Read/Write               :  1106.561 ms
Memfd 4 KiB    : POPULATE_READ            :    78.450 ms
Memfd 4 KiB    : POPULATE_WRITE           :   805.881 ms
Memfd 2 MiB    : Read                     :   357.116 ms
Memfd 2 MiB    : Write                    :   357.210 ms
Memfd 2 MiB    : Read/Write               :   357.606 ms
Memfd 2 MiB    : POPULATE_READ            :   356.094 ms
Memfd 2 MiB    : POPULATE_WRITE           :   356.937 ms
tmpfs          : Read                     :   137.536 ms
tmpfs          : Write                    :   954.362 ms
tmpfs          : Read/Write               :  1105.954 ms
tmpfs          : POPULATE_READ            :    80.289 ms
tmpfs          : POPULATE_WRITE           :   822.826 ms
file           : Read                     :   137.874 ms
file           : Write                    :   987.025 ms
file           : Read/Write               :  1107.439 ms
file           : POPULATE_READ            :    80.413 ms
file           : POPULATE_WRITE           :   857.622 ms
hugetlbfs      : Read                     :   355.607 ms
hugetlbfs      : Write                    :   355.729 ms
hugetlbfs      : Read/Write               :   356.127 ms
hugetlbfs      : POPULATE_READ            :   354.585 ms
hugetlbfs      : POPULATE_WRITE           :   355.138 ms
**************************************************
2 MiB MAP_SHARED:
**************************************************
Anon 4 KiB     : Read                     :     0.394 ms
Anon 4 KiB     : Write                    :     0.348 ms
Anon 4 KiB     : Read/Write               :     0.400 ms
Anon 4 KiB     : POPULATE_READ            :     0.326 ms
Anon 4 KiB     : POPULATE_WRITE           :     0.273 ms
Anon 2 MiB     : Read                     :     0.030 ms
Anon 2 MiB     : Write                    :     0.030 ms
Anon 2 MiB     : Read/Write               :     0.030 ms
Anon 2 MiB     : POPULATE_READ            :     0.030 ms
Anon 2 MiB     : POPULATE_WRITE           :     0.030 ms
Memfd 4 KiB    : Read                     :     0.412 ms
Memfd 4 KiB    : Write                    :     0.372 ms
Memfd 4 KiB    : Read/Write               :     0.419 ms
Memfd 4 KiB    : POPULATE_READ            :     0.343 ms
Memfd 4 KiB    : POPULATE_WRITE           :     0.288 ms
Memfd 4 KiB    : FALLOCATE                :     0.137 ms
Memfd 4 KiB    : FALLOCATE+Read           :     0.446 ms
Memfd 4 KiB    : FALLOCATE+Write          :     0.330 ms
Memfd 4 KiB    : FALLOCATE+Read/Write     :     0.454 ms
Memfd 4 KiB    : FALLOCATE+POPULATE_READ  :     0.379 ms
Memfd 4 KiB    : FALLOCATE+POPULATE_WRITE :     0.268 ms
Memfd 2 MiB    : Read                     :     0.030 ms
Memfd 2 MiB    : Write                    :     0.030 ms
Memfd 2 MiB    : Read/Write               :     0.030 ms
Memfd 2 MiB    : POPULATE_READ            :     0.030 ms
Memfd 2 MiB    : POPULATE_WRITE           :     0.030 ms
Memfd 2 MiB    : FALLOCATE                :     0.030 ms
Memfd 2 MiB    : FALLOCATE+Read           :     0.031 ms
Memfd 2 MiB    : FALLOCATE+Write          :     0.031 ms
Memfd 2 MiB    : FALLOCATE+Read/Write     :     0.031 ms
Memfd 2 MiB    : FALLOCATE+POPULATE_READ  :     0.030 ms
Memfd 2 MiB    : FALLOCATE+POPULATE_WRITE :     0.030 ms
tmpfs          : Read                     :     0.416 ms
tmpfs          : Write                    :     0.369 ms
tmpfs          : Read/Write               :     0.425 ms
tmpfs          : POPULATE_READ            :     0.346 ms
tmpfs          : POPULATE_WRITE           :     0.295 ms
tmpfs          : FALLOCATE                :     0.139 ms
tmpfs          : FALLOCATE+Read           :     0.447 ms
tmpfs          : FALLOCATE+Write          :     0.333 ms
tmpfs          : FALLOCATE+Read/Write     :     0.454 ms
tmpfs          : FALLOCATE+POPULATE_READ  :     0.380 ms
tmpfs          : FALLOCATE+POPULATE_WRITE :     0.272 ms
file           : Read                     :     0.191 ms
file           : Write                    :     0.511 ms
file           : Read/Write               :     0.524 ms
file           : POPULATE_READ            :     0.196 ms
file           : POPULATE_WRITE           :     0.434 ms
file           : FALLOCATE                :     0.004 ms
file           : FALLOCATE+Read           :     0.197 ms
file           : FALLOCATE+Write          :     0.554 ms
file           : FALLOCATE+Read/Write     :     0.480 ms
file           : FALLOCATE+POPULATE_READ  :     0.201 ms
file           : FALLOCATE+POPULATE_WRITE :     0.381 ms
hugetlbfs      : Read                     :     0.030 ms
hugetlbfs      : Write                    :     0.030 ms
hugetlbfs      : Read/Write               :     0.030 ms
hugetlbfs      : POPULATE_READ            :     0.030 ms
hugetlbfs      : POPULATE_WRITE           :     0.030 ms
hugetlbfs      : FALLOCATE                :     0.030 ms
hugetlbfs      : FALLOCATE+Read           :     0.031 ms
hugetlbfs      : FALLOCATE+Write          :     0.031 ms
hugetlbfs      : FALLOCATE+Read/Write     :     0.030 ms
hugetlbfs      : FALLOCATE+POPULATE_READ  :     0.030 ms
hugetlbfs      : FALLOCATE+POPULATE_WRITE :     0.030 ms
**************************************************
4096 MiB MAP_SHARED:
**************************************************
Anon 4 KiB     : Read                     :  1053.090 ms
Anon 4 KiB     : Write                    :   913.642 ms
Anon 4 KiB     : Read/Write               :  1060.350 ms
Anon 4 KiB     : POPULATE_READ            :   893.691 ms
Anon 4 KiB     : POPULATE_WRITE           :   782.885 ms
Anon 2 MiB     : Read                     :   358.553 ms
Anon 2 MiB     : Write                    :   358.419 ms
Anon 2 MiB     : Read/Write               :   357.992 ms
Anon 2 MiB     : POPULATE_READ            :   357.533 ms
Anon 2 MiB     : POPULATE_WRITE           :   357.808 ms
Memfd 4 KiB    : Read                     :  1078.144 ms
Memfd 4 KiB    : Write                    :   942.036 ms
Memfd 4 KiB    : Read/Write               :  1100.391 ms
Memfd 4 KiB    : POPULATE_READ            :   925.829 ms
Memfd 4 KiB    : POPULATE_WRITE           :   804.394 ms
Memfd 4 KiB    : FALLOCATE                :   304.632 ms
Memfd 4 KiB    : FALLOCATE+Read           :  1163.359 ms
Memfd 4 KiB    : FALLOCATE+Write          :   933.186 ms
Memfd 4 KiB    : FALLOCATE+Read/Write     :  1187.304 ms
Memfd 4 KiB    : FALLOCATE+POPULATE_READ  :  1013.660 ms
Memfd 4 KiB    : FALLOCATE+POPULATE_WRITE :   794.560 ms
Memfd 2 MiB    : Read                     :   358.131 ms
Memfd 2 MiB    : Write                    :   358.099 ms
Memfd 2 MiB    : Read/Write               :   358.250 ms
Memfd 2 MiB    : POPULATE_READ            :   357.563 ms
Memfd 2 MiB    : POPULATE_WRITE           :   357.334 ms
Memfd 2 MiB    : FALLOCATE                :   356.735 ms
Memfd 2 MiB    : FALLOCATE+Read           :   358.152 ms
Memfd 2 MiB    : FALLOCATE+Write          :   358.331 ms
Memfd 2 MiB    : FALLOCATE+Read/Write     :   358.018 ms
Memfd 2 MiB    : FALLOCATE+POPULATE_READ  :   357.286 ms
Memfd 2 MiB    : FALLOCATE+POPULATE_WRITE :   357.523 ms
tmpfs          : Read                     :  1087.265 ms
tmpfs          : Write                    :   950.840 ms
tmpfs          : Read/Write               :  1107.567 ms
tmpfs          : POPULATE_READ            :   922.605 ms
tmpfs          : POPULATE_WRITE           :   810.094 ms
tmpfs          : FALLOCATE                :   306.320 ms
tmpfs          : FALLOCATE+Read           :  1169.796 ms
tmpfs          : FALLOCATE+Write          :   933.730 ms
tmpfs          : FALLOCATE+Read/Write     :  1191.610 ms
tmpfs          : FALLOCATE+POPULATE_READ  :  1020.474 ms
tmpfs          : FALLOCATE+POPULATE_WRITE :   798.945 ms
file           : Read                     :   654.101 ms
file           : Write                    :  1259.142 ms
file           : Read/Write               :  1289.509 ms
file           : POPULATE_READ            :   661.642 ms
file           : POPULATE_WRITE           :  1106.816 ms
file           : FALLOCATE                :     1.864 ms
file           : FALLOCATE+Read           :   656.328 ms
file           : FALLOCATE+Write          :  1153.300 ms
file           : FALLOCATE+Read/Write     :  1180.613 ms
file           : FALLOCATE+POPULATE_READ  :   668.347 ms
file           : FALLOCATE+POPULATE_WRITE :   996.143 ms
hugetlbfs      : Read                     :   357.245 ms
hugetlbfs      : Write                    :   357.413 ms
hugetlbfs      : Read/Write               :   357.120 ms
hugetlbfs      : POPULATE_READ            :   356.321 ms
hugetlbfs      : POPULATE_WRITE           :   356.693 ms
hugetlbfs      : FALLOCATE                :   355.927 ms
hugetlbfs      : FALLOCATE+Read           :   357.074 ms
hugetlbfs      : FALLOCATE+Write          :   357.120 ms
hugetlbfs      : FALLOCATE+Read/Write     :   356.983 ms
hugetlbfs      : FALLOCATE+POPULATE_READ  :   356.413 ms
hugetlbfs      : FALLOCATE+POPULATE_WRITE :   356.266 ms
**************************************************

[1] https://lkml.org/lkml/2013/6/27/698

[akpm@linux-foundation.org: coding style fixes]

Link: https://lkml.kernel.org/r/20210419135443.12822-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: make variable names for populate_vma_page_range() consistent

Patch series "mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables", v2.

Excessive details on MADV_POPULATE_(READ|WRITE) can be found in patch #2.

This patch (of 5):

Let's make the variable names in the function declaration match the
variable names used in the definition.

Link: https://lkml.kernel.org/r/20210419135443.12822-1-david@redhat.com
Link: https://lkml.kernel.org/r/20210419135443.12822-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rik van Riel <riel@surriel.com>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: generalize ZONE_[DMA|DMA32]

ZONE_[DMA|DMA32] configs have duplicate definitions on platforms that
subscribe to them.  Instead, just make them generic options which can be
selected on applicable platforms.

Also only x86/arm64 architectures could enable both ZONE_DMA and
ZONE_DMA32 if EXPERT, add ARCH_HAS_ZONE_DMA_SET to make dma zone
configurable and visible on the two architectures.

Link: https://lkml.kernel.org/r/20210528074557.17768-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> [RISC-V]
Acked-by: Michal Simek <michal.simek@xilinx.com> [microblaze]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/nommu: unexport do_munmap()

do_munmap() does not take the mmap_write_lock().  vm_munmap() should be
used instead.

Link: https://lkml.kernel.org/r/20210604194002.648037-1-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nommu: remove __GFP_HIGHMEM in vmalloc/vzalloc

mm/nommu.c:
void *__vmalloc(unsigned long size, gfp_t gfp_mask)
{
/*
 *  You can't specify __GFP_HIGHMEM with kmalloc() since kmalloc()
 * returns only a logical address.
 */
return kmalloc(size, (gfp_mask | __GFP_COMP) & ~__GFP_HIGHMEM);
}

nommu's __vmalloc just uses kmalloc internally and elimitates
__GFP_HIGHMEM, so it makes no sense to add __GFP_HIGHMEM for nommu's
vmalloc/vzalloc.

[akpm@linux-foundation.org: coding style fixes]

Link: https://lkml.kernel.org/r/875z00rnp8.wl-chenli@uniontech.com
Signed-off-by: Chen Li <chenli@uniontech.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: fix strncpy warning

Using MAX_INPUT_BUF_SZ as the maximum length of the string makes fortify
complain as it thinks the string might be longer than the buffer, and if
it is, we will end up with a "string" that is missing a NUL terminator.
It's trivial to show that 'tok' points to a NUL-terminated string which is
less than MAX_INPUT_BUF_SZ in length, so we may as well just use strcpy()
and avoid the warning.

Link: https://lkml.kernel.org/r/20210615200242.1716568-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: hwpoison_user_mappings() try_to_unmap() with TTU_SYNC

TTU_SYNC prevents an unlikely race, when try_to_unmap() returns shortly
before the page is accounted as unmapped.  It is unlikely to coincide with
hwpoisoning, but now that we have the flag, hwpoison_user_mappings() would
do well to use it.

Link: https://lkml.kernel.org/r/329c28ed-95df-9a2c-8893-b444d8a6d340@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jue Wang <juew@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: remap_page() is only needed on anonymous THP

THP splitting's unmap_page() only sets TTU_SPLIT_FREEZE when PageAnon, and
migration entries are only inserted when TTU_MIGRATION (unused here) or
TTU_SPLIT_FREEZE is set: so it's just a waste of time for remap_page() to
search for migration entries to remove when !PageAnon.

Link: https://lkml.kernel.org/r/f987bc44-f28e-688d-2424-b4722153ed8@google.com
Fixes: baa355fd3314 ("thp: file pages support for split_huge_page()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jue Wang <juew@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: rmap: make try_to_unmap() void function

Currently try_to_unmap() return bool value by checking page_mapcount(),
however this may return false positive since page_mapcount() doesn't check
all subpages of compound page.  The total_mapcount() could be used
instead, but its cost is higher since it traverses all subpages.

Actually the most callers of try_to_unmap() don't care about the return
value at all.  So just need check if page is still mapped by page_mapped()
when necessary.  And page_mapped() does bail out early when it finds
mapped subpage.

Link: https://lkml.kernel.org/r/bb27e3fe-6036-b637-5086-272befbfe3da@google.com
Suggested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jue Wang <juew@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: make ARCH_ENABLE_SPLIT_PMD_PTLOCK dependent on PGTABLE_LEVELS > 2

ARCH_ENABLE_SPLIT_PMD_PTLOCK is irrelevant unless there are more than two
page table levels including PMD (also per
Documentation/vm/split_page_table_lock.rst).  Make this dependency
explicit on remaining platforms i.e x86 and s390 where
ARCH_ENABLE_SPLIT_PMD_PTLOCK is subscribed.

Link: https://lkml.kernel.org/r/1622013501-20409-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> # s390
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: thp: skip make PMD PROT_NONE if THP migration is not supported

A quick grep shows x86_64, PowerPC (book3s), ARM64 and S390 support both
NUMA balancing and THP.  But S390 doesn't support THP migration so NUMA
balancing actually can't migrate any misplaced pages.

Skip make PMD PROT_NONE for such case otherwise CPU cycles may be wasted
by pointless NUMA hinting faults on S390.

Link: https://lkml.kernel.org/r/20210518200801.7413-8-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: migrate: check mapcount for THP instead of refcount

The generic migration path will check refcount, so no need check refcount
here.  But the old code actually prevents from migrating shared THP
(mapped by multiple processes), so bail out early if mapcount is > 1 to
keep the behavior.

Link: https://lkml.kernel.org/r/20210518200801.7413-7-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: migrate: don't split THP for misplaced NUMA page

The old behavior didn't split THP if migration is failed due to lack of
memory on the target node.  But the THP migration does split THP, so keep
the old behavior for misplaced NUMA page migration.

Link: https://lkml.kernel.org/r/20210518200801.7413-6-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: migrate: account THP NUMA migration counters correctly

Now both base page and THP NUMA migration is done via
migrate_misplaced_page(), keep the counters correctly for THP.

Link: https://lkml.kernel.org/r/20210518200801.7413-5-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: thp: refactor NUMA fault handling

When the THP NUMA fault support was added THP migration was not supported
yet.  So the ad hoc THP migration was implemented in NUMA fault handling.
Since v4.14 THP migration has been supported so it doesn't make too much
sense to still keep another THP migration implementation rather than using
the generic migration code.

This patch reworks the NUMA fault handling to use generic migration
implementation to migrate misplaced page.  There is no functional change.

After the refactor the flow of NUMA fault handling looks just like its
PTE counterpart:
  Acquire ptl
  Prepare for migration (elevate page refcount)
  Release ptl
  Isolate page from lru and elevate page refcount
  Migrate the misplaced THP

If migration fails just restore the old normal PMD.

In the old code anon_vma lock was needed to serialize THP migration
against THP split, but since then the THP code has been reworked a lot, it
seems anon_vma lock is not required anymore to avoid the race.

The page refcount elevation when holding ptl should prevent from THP
split.

Use migrate_misplaced_page() for both base page and THP NUMA hinting fault
and remove all the dead and duplicate code.

[dan.carpenter@oracle.com: fix a double unlock bug]
Link: https://lkml.kernel.org/r/YLX8uYN01JmfLnlK@mwanda
Link: https://lkml.kernel.org/r/20210518200801.7413-4-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memory: make numa_migrate_prep() non-static

The numa_migrate_prep() will be used by huge NUMA fault as well in the
following patch, make it non-static.

Link: https://lkml.kernel.org/r/20210518200801.7413-3-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memory: add orig_pmd to struct vm_fault

Pach series "mm: thp: use generic THP migration for NUMA hinting fault", v3.

When the THP NUMA fault support was added THP migration was not supported
yet.  So the ad hoc THP migration was implemented in NUMA fault handling.
Since v4.14 THP migration has been supported so it doesn't make too much
sense to still keep another THP migration implementation rather than using
the generic migration code.  It is definitely a maintenance burden to keep
two THP migration implementation for different code paths and it is more
error prone.  Using the generic THP migration implementation allows us
remove the duplicate code and some hacks needed by the old ad hoc
implementation.

A quick grep shows x86_64, PowerPC (book3s), ARM64 ans S390 support both
THP and NUMA balancing.  The most of them support THP migration except for
S390.  Zi Yan tried to add THP migration support for S390 before but it
was not accepted due to the design of S390 PMD.  For the discussion,
please see: https://lkml.org/lkml/2018/4/27/953.

Per the discussion with Gerald Schaefer in v1 it is acceptible to skip
huge PMD for S390 for now.

I saw there were some hacks about gup from git history, but I didn't
figure out if they have been removed or not since I just found FOLL_NUMA
code in the current gup implementation and they seems useful.

Patch #1 ~ #2 are preparation patches.
Patch #3 is the real meat.
Patch #4 ~ #6 keep consistent counters and behaviors with before.
Patch #7 skips change huge PMD to prot_none if thp migration is not supported.

Test
----
Did some tests to measure the latency of do_huge_pmd_numa_page.  The test
VM has 80 vcpus and 64G memory.  The test would create 2 processes to
consume 128G memory together which would incur memory pressure to cause
THP splits.  And it also creates 80 processes to hog cpu, and the memory
consumer processes are bound to different nodes periodically in order to
increase NUMA faults.

The below test script is used:

echo 3 > /proc/sys/vm/drop_caches

# Run stress-ng for 24 hours
./stress-ng/stress-ng --vm 2 --vm-bytes 64G --timeout 24h &
PID=$!

./stress-ng/stress-ng --cpu $NR_CPUS --timeout 24h &

# Wait for vm stressors forked
sleep 5

PID_1=`pgrep -P $PID | awk 'NR == 1'`
PID_2=`pgrep -P $PID | awk 'NR == 2'`

JOB1=`pgrep -P $PID_1`
JOB2=`pgrep -P $PID_2`

# Bind load jobs to different nodes periodically to force generate
# cross node memory access
while [ -d "/proc/$PID" ]
do
        taskset -apc 8 $JOB1
        taskset -apc 8 $JOB2
        sleep 300
        taskset -apc 58 $JOB1
        taskset -apc 58 $JOB2
        sleep 300
done

With the above test the histogram of latency of do_huge_pmd_numa_page is
as shown below.  Since the number of do_huge_pmd_numa_page varies
drastically for each run (should be due to scheduler), so I converted the
raw number to percentage.

                             patched               base
@us[stress-ng]:
[0]                          3.57%                 0.16%
[1]                          55.68%                18.36%
[2, 4)                       10.46%                40.44%
[4, 8)                       7.26%                 17.82%
[8, 16)                      21.12%                13.41%
[16, 32)                     1.06%                 4.27%
[32, 64)                     0.56%                 4.07%
[64, 128)                    0.16%                 0.35%
[128, 256)                   < 0.1%                < 0.1%
[256, 512)                   < 0.1%                < 0.1%
[512, 1K)                    < 0.1%                < 0.1%
[1K, 2K)                     < 0.1%                < 0.1%
[2K, 4K)                     < 0.1%                < 0.1%
[4K, 8K)                     < 0.1%                < 0.1%
[8K, 16K)                    < 0.1%                < 0.1%
[16K, 32K)                   < 0.1%                < 0.1%
[32K, 64K)                   < 0.1%                < 0.1%

Per the result, patched kernel is even slightly better than the base
kernel.  I think this is because the lock contention against THP split is
less than base kernel due to the refactor.

To exclude the affect from THP split, I also did test w/o memory pressure.
No obvious regression is spotted.  The below is the test result *w/o*
memory pressure.

                           patched                  base
@us[stress-ng]:
[0]                        7.97%                   18.4%
[1]                        69.63%                  58.24%
[2, 4)                     4.18%                   2.63%
[4, 8)                     0.22%                   0.17%
[8, 16)                    1.03%                   0.92%
[16, 32)                   0.14%                   < 0.1%
[32, 64)                   < 0.1%                  < 0.1%
[64, 128)                  < 0.1%                  < 0.1%
[128, 256)                 < 0.1%                  < 0.1%
[256, 512)                 0.45%                   1.19%
[512, 1K)                  15.45%                  17.27%
[1K, 2K)                   < 0.1%                  < 0.1%
[2K, 4K)                   < 0.1%                  < 0.1%
[4K, 8K)                   < 0.1%                  < 0.1%
[8K, 16K)                  0.86%                   0.88%
[16K, 32K)                 < 0.1%                  0.15%
[32K, 64K)                 < 0.1%                  < 0.1%
[64K, 128K)                < 0.1%                  < 0.1%
[128K, 256K)               < 0.1%                  < 0.1%

The series also survived a series of tests that exercise NUMA balancing
migrations by Mel.

This patch (of 7):

Add orig_pmd to struct vm_fault so the "orig_pmd" parameter used by huge
page fault could be removed, just like its PTE counterpart does.

Link: https://lkml.kernel.org/r/20210518200801.7413-1-shy828301@gmail.com
Link: https://lkml.kernel.org/r/20210518200801.7413-2-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, thp: relax the VM_DENYWRITE constraint on file-backed THPs

Transparent huge pages are supported for read-only non-shmem files, but
are only used for vmas with VM_DENYWRITE.  This condition ensures that
file THPs are protected from writes while an application is running
(ETXTBSY).  Any existing file THPs are then dropped from the page cache
when a file is opened for write in do_dentry_open().  Since sys_mmap
ignores MAP_DENYWRITE, this constrains the use of file THPs to vmas
produced by execve().

Systems that make heavy use of shared libraries (e.g.  Android) are unable
to apply VM_DENYWRITE through the dynamic linker, preventing them from
benefiting from the resultant reduced contention on the TLB.

This patch reduces the constraint on file THPs allowing use with any
executable mapping from a file not opened for write (see
inode_is_open_for_write()).  It also introduces additional conditions to
ensure that files opened for write will never be backed by file THPs.

Restricting the use of THPs to executable mappings eliminates the risk
that a read-only file later opened for write would encounter significant
latencies due to page cache truncation.

The ld linker flag '-z max-page-size=(hugepage size)' can be used to
produce executables with the necessary layout.  The dynamic linker must
map these file's segments at a hugepage size aligned vma for the mapping
to be backed with THPs.

Comparison of the performance characteristics of 4KB and 2MB-backed
libraries follows; the Android dex2oat tool was used to AOT compile an
example application on a single ARM core.

4KB Pages:
==========

count              event_name            # count / runtime
598,995,035,942    cpu-cycles            # 1.800861 GHz
 81,195,620,851    raw-stall-frontend    # 244.112 M/sec
347,754,466,597    iTLB-loads            # 1.046 G/sec
  2,970,248,900    iTLB-load-misses      # 0.854122% miss rate

Total test time: 332.854998 seconds.

2MB Pages:
==========

count              event_name            # count / runtime
592,872,663,047    cpu-cycles            # 1.800358 GHz
 76,485,624,143    raw-stall-frontend    # 232.261 M/sec
350,478,413,710    iTLB-loads            # 1.064 G/sec
    803,233,322    iTLB-load-misses      # 0.229182% miss rate

Total test time: 329.826087 seconds

A check of /proc/$(pidof dex2oat64)/smaps shows THPs in use:

/apex/com.android.art/lib64/libart.so
FilePmdMapped:      4096 kB

/apex/com.android.art/lib64/libart-compiler.so
FilePmdMapped:      2048 kB

Link: https://lkml.kernel.org/r/20210406000930.3455850-1-cfijalkovich@google.com
Signed-off-by: Collin Fijalkovich <cfijalkovich@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Song Liu <song@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: migrate: fix missing update page_private to hugetlb_page_subpool

Since commit d6995da31122 ("hugetlb: use page.private for hugetlb specific
page flags") converts page.private for hugetlb specific page flags.  We
should use hugetlb_page_subpool() to get the subpool pointer instead of
page_private().

This 'could' prevent the migration of hugetlb pages.  page_private(hpage)
is now used for hugetlb page specific flags.  At migration time, the only
flag which could be set is HPageVmemmapOptimized.  This flag will only be
set if the new vmemmap reduction feature is enabled.  In addition,
!page_mapping() implies an anonymous mapping.  So, this will prevent
migration of hugetb pages in anonymous mappings if the vmemmap reduction
feature is enabled.

In addition, that if statement checked for the rare race condition of a
page being migrated while in the process of being freed.  Since that check
is now wrong, we could leak hugetlb subpool usage counts.

The commit forgot to update it in the page migration routine.  So fix it.

[songmuchun@bytedance.com: fix compiler error when !CONFIG_HUGETLB_PAGE reported by Randy]
Link: https://lkml.kernel.org/r/20210521022747.35736-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20210520025949.1866-1-songmuchun@bytedance.com
Fixes: d6995da31122 ("hugetlb: use page.private for hugetlb specific page flags")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Anshuman Khandual <anshuman.khandual@arm.com> [arm64]
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm64/mm: drop HAVE_ARCH_PFN_VALID

CONFIG_SPARSEMEM_VMEMMAP is now the only available memory model on arm64
platforms and free_unused_memmap() would just return without creating any
holes in the memmap mapping.  There is no need for any special handling in
pfn_valid() and HAVE_ARCH_PFN_VALID can just be dropped.  This also moves
the pfn upper bits sanity check into generic pfn_valid().

Link: https://lkml.kernel.org/r/1621947349-25421-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>